Patent Application
20150218096
Upon activation by antigen-presenting cells naïve T helper cells undergo clonal expansion and will ultimately differentiate in cytokine secreting effector T cells, such as Th1 and Th2 subtypes. A third and distinct effector subset has been identified, which plays a key role in providing immunity to bacteria and fungi at mucosal surfaces (Kastelein et al., Annu. Rev. Immunol. 25: 221-242, 2007). This effector T helper cell subset can be distinguished based on its ability to produce large quantities of IL-17/F, IL-21 and IL-22, and is named Th17 (Miossec et al., New Eng. J. Med. 2361: 888-898, 2009)
ifferent T helper subsets are characterized by the expression of lineage specific master transcription factors. Th1 and Th2 effector cells express Tbet and GATA3, respectively. A Thymocyte/T cell specific variant of Retinoic Acid Receptor-related Orphan Receptor (ROR), RORgammaT, is highly expressed in Th17 cells (He et al., Immunity 9: 797-806, 1998). RORgammaT belongs to the nuclear hormone receptor superfamily (Hirose et al., Biochem. Biophys. Res. Comm. 205: 1976-1983, 1994). RORgammaT is a truncated form of RORgamma, lacking the first N-terminal 21 amino acids and is, in contrast to RORgamma which is expressed in multiple tissues (heart, brain, kidney, lung, liver, and muscle), exclusively expressed in cells of the lymphoid lineage and embryonic lymphoid tissue inducers (Sun et al., Science 288: 2369-2372, 2000; Eberl et al., Nat Immunol. 5: 64-73, 2004)
tudies using heterozygous knock-in mice replacing the RORgammaT open reading frame with GFP (green fluorescent protein), revealed a constitutive expression of GFP in approximately 10% of the CD4+ T cells in the small intestinal lamina propria (LP), co-expressing the Th17 cytokines IL-17/F and IL-22 (Ivanov et al., Cell 126: 1121-1133, 2006). In mice deficient for RORgammaT, the number of Th17 cells was markedly decreased in the LP; and in vitro stimulation of CD4+ T cells under Th17 polarizing conditions resulted in a drastic decrease of IL-17 expression. These results were further substantiated via forced expression of RORgammaT in naïve CD4+ T cells, which resulted in an induction of IL-17/F and IL-22 (Ivanov et al., Cell 126: 1121-1133, 2006). The foregoing studies demonstrate the importance of RORgammaT in differentiation and stabilization of the Th17 lineage. In addition, a ROR family member, RORalpha, has been demonstrated to be involved in Th17 differentiation and stabilization (Yang et al., Immunity 28: 29-39, 2008)
ecently, RORgammaT was shown to play a crucial role in non-Th17 lymphoid cells. In these studies, RORgammaT was critically important in innate lymphoid cells expressing Thy1, SCA-1, and IL-23R proteins. Genetic disruption of RORgamma in a mouse colitis model dependent on these innate lymphoid cells prevented colitis development (Buonocore et al., Nature 464: 1371-1375, 2010). In addition, RORgammaT was shown to play a crucial role in other non-Th17 cells, such as mast cells (Hueber et al., J. Immunol. 184: 3336-3340, 2010). Finally, RORgammaT expression and secretion of Th17-type of cytokines was reported for Lymphoid Tissue Inducer cells, NK T-cells, NK cells (Eberl et al., Nat. Immunol. 5: 64-73, 2004), and gamma-delta T-cells (Sutton et al., Nat. Immunol. 31: 331-341, 2009; Louten et al., J. Allergy Clin. Immunol. 123: 1004-1011, 2009), suggesting an important function for RORgammaT in these subtypes of cells.
Based on the role of IL-17 producing cells (either Th17 or non-Th17 cells), RORgammaT has been identified as a key mediator in the pathogenesis of several diseases (Louten et al., J. Allergy Clin. Immunol. 123: 1004-1011, 2009; Annuziato et al., Nat. Rev. Rheumatol. 5: 325-331, 2009). This was confirmed using several disease models representative of autoimmune diseases. Genetic ablation of the RORgamma gene in mice prevented the development of experimental autoimmune diseases, such as experimental autoimmune encephalomyelitis (EAE) and colitis (Ivanov et al., Cell 126:1121-33, 2006; Buonocore et al., Nature 464: 1371-1375, 2010)
ith RORgammaT being a critical mediator in Th17-cells and non-Th17 cells, antagonism of the transcriptional activity of RORgammaT is expected to have a beneficial effect on autoimmune diseases, such as but not limited to rheumatoid arthritis, psoriasis, multiple sclerosis, inflammatory bowel disease, Crohn's disease, and asthma (Annunziato et al., Nat. Rev. Immunol. 5: 325-331, 2009; Louten et al., J. Allergy Clin. Immunol. 123: 1004-1011, 2009). Antagonism of RORgammaT may also be beneficial in other diseases that are characterized by increased levels of Th17 cells and/or elevated levels of Th17 hallmark cytokines such as IL-17, IL-22 and IL-23. Examples of such diseases are Kawasaki Disease (Jia et al., Clin. Exp. Immunol. 162: 131-137, 2010) and Hashimoto's thyroiditis (Figueroa-Vega et al., J. Clin. Endocrinol. Metab. 95: 953-62, 2010). Another example includes infectious diseases, such as but not limited to mucosal leishmaniasis (Boaventura et al., Eur. J. Immunol. 40: 2830-2836, 2010). In each of the above examples the inhibition may be enhanced by simultaneous inhibition of RORalpha.
Compounds modulating RORgammaT have been reported. Examples of agonists include T0901317 and SR1078 (Wang et al., ACS Chem. Biol. 5:1029-1034, 2010). In addition, antagonists have been reported such as 7-oxygenated sterols (Wang et al., J. Biol. Chem. 285: 5013-5025, 2009) and compounds described in EP2181710 A1.
Numerous immune and inflammatory disorders continue to afflict millions of patients worldwide. Although significant advances have been made in treating these disorders, current therapies do not provide satisfactory results for all patients due to, for example, detrimental side effects or insufficient efficacy. One exemplary immune disorder in need of better therapy is psoriasis. Various therapeutics have been developed in an attempt to treat psoriasis. However, the traditional therapies for psoriasis often have toxic adverse effects. An exemplary inflammatory disorder in need of better treatment is rheumatoid arthritis. Numerous therapeutics have been developed in an attempt to treat this disorder. However, some patients develop resistance to current therapies.
Accordingly, a need exists for improved treatments for immune disorders and inflammatory disorders. The present invention addresses this need and provides other related advantages.
The present invention provides compounds that alter the interaction of coregulator proteins with RORgammaT and thereby antagonize RORgammaT-mediated transcriptional activity, their use for the treatment of RORgammaT-mediated diseases or conditions, in particular autoimmune diseases and inflammatory diseases, as well as pharmaceutical compositions comprising such compounds and pharmaceutical carriers.
The present invention provides a compound according to Formula I
In a first embodiment of the compound having Formula I is a compound having Formula Ia
and a pharmaceutically acceptable salt or solvate thereof.
In a second embodiment of the compound having Formula I is a compound having Formula Ib
and a pharmaceutically acceptable salt or solvate thereof.
In a first subset of the second embodiment is a compound wherein Y is N.
In a third embodiment of the compound having Formula I is a compound having Formula Ic
In a fourth embodiment of the compound having Formula I is a compound having Formula Id
and a pharmaceutically acceptable salt or solvate thereof.
In a first subset of the fourth embodiment is a compound wherein Y is N.
In a first subset of the first embodiment is a compound having Formula Ie
wherein x is 0, 1, 2, 3, 4 or 5; and a pharmaceutically acceptable salt or solvate thereof.
In a second subset is a compound having Formula If
and a pharmaceutically acceptable salt or solvate thereof.
In a third subset is a compound having Formula Ig
and a pharmaceutically acceptable salt or solvate thereof.
In a fourth subset is a compound having Formula Ih
and a pharmaceutically acceptable salt or solvate thereof.
In a fifth subset is a compound having Formula Ii
wherein
R8a is (C3-7)cycloalkyl or (C3-5)heterocycloalkyl, and
x is 1 or 2,
and a pharmaceutically salt or solvate thereof
In a preferred embodiment R8a is a (C3-6)cycloalkyl which includes but is not limited to cyclopropyl, cyclobutyl, cyclopentyl and cyclohexyl. In a preferred embodiment R8a is cyclopropyl or cyclobutyl.
In another preferred embodiment R8a is a (C3-5)heterocycloalkyl having one heteroatom such as O or N, which includes but is not limited to morpholinyl, azetidinyl, or oxetanyl.
In a fifth subset of the first embodiment is a compound wherein A4, A5, A6, A7 are selected from the group consisting of: (i) CR4, CR5, CR6, CR7; (ii) N, CR5, CR6, CR7; (iii) CR4, N, CR6, CR7; (iv) CR4, CR5, N, CR7; (v) CR4, CR5, CR6, N; (vi) N, N, CR6, CR7; (vii) CR4, N, N, CR7; (viii) CR4, CR5, N, N; (ix) N, CR5, N, CR7; (x) CR4, N, CR6, N; and (xi) N, CR5, CR6, N.
In a sixth subset is a compound wherein A4, A5, A6, A7 are selected from the group consisting of: (i) CR4, CR5, CR6, CR7; (ii) N, CR5, CR6, CR7; and (iii) CR4, N, CR6, CR7.
In a seventh subset is a compound wherein A4, A5, A6, A7 is (i) CR4, CR5, CR6, CR7, or (ii) N, CR5, CR6, CR7; and Y is N.
In an eighth subset is a compound wherein R1 is
(i) (C3-7)cycloalkyl or (C3-5)heterocycloalkyl, both optionally substituted with one, two, three, four or five R8;
(ii) (C2-9)heteroaryl(C0-4)alkyl, optionally substituted with one, two, three, four or five R8; or
(iii) (C6-14)aryl(C0-4)alkyl, optionally substituted with one, two, three, four or five R8.
In a ninth subset is a compound wherein R1 is (i) (C2-9)heteroaryl, or (ii) (C6-14)aryl, optionally substituted with one, two, three, four or five R8.
In a tenth subset is a compound wherein R1 is (C6-14)aryl, optionally substituted with one or two R8.
In an eleventh subset is a compound wherein R1 is phenyl, optionally substituted with one or two R8.
In a twelfth subset is a compound wherein R2 is C(O)OH.
In a thirteenth subset is a compound wherein R6 is
A still further embodiment of the compounds of Formula I, Ia, Ib, Ic, Id, Ie, If, Ig and Ih, are compounds wherein one of R4, R5, R6, and R7 is other than hydrogen.
The invention also relates to those compounds wherein all specific definitions for A1 through A4, R1 through R8, Ra, Y, m, n and x and all substituent groups in the various aspects of the inventions defined hereinabove occur in any combination within the definition of the compound of Formula I.
Non-limiting examples of the compounds of the present invention include:
The terms used herein have their ordinary meaning and the meaning of such terms is independent at each occurrence thereof. That notwithstanding, and except where stated otherwise, the following definitions apply throughout the specification and claims. Chemical names, common names, and chemical structures may be used interchangeably to describe the same structure. If a chemical compound is referred to using both a chemical structure and a chemical name, and an ambiguity exists between the structure and the name, the structure predominates. These definitions apply regardless of whether a term is used by itself or in combination with other terms, unless otherwise indicated. Hence, the definition of “alkyl” applies to “alkyl” as well as the “alkyl” portions of “hydroxyalkyl,” “fluoroalkyl,” “alkoxy”, etc.
As used herein, and throughout this disclosure, the following terms, unless otherwise indicated, shall be understood to have the following meanings:
The term “alkyl,” as used herein, refers to an aliphatic hydrocarbon group having one of its hydrogen atoms replaced with a bond having the specified number of carbon atoms. In different embodiments, an alkyl group contains, for example, from 1 to 6 carbon atoms (C1-C6 alkyl) or from 1 to 3 carbon atoms (C1-C3 alkyl). Non-limiting examples of alkyl groups include methyl, ethyl, n-propyl, isopropyl, n-butyl, sec-butyl, isobutyl, tert-butyl, n-pentyl, neopentyl, isopentyl, n-hexyl, isohexyl and neohexyl. In one embodiment, an alkyl group is linear. In another embodiment, an alkyl group is branched.
Unless specified otherwise, “alkyl” includes both branched- and straight-chain saturated aliphatic hydrocarbon groups, including all isomers, having the specified number of carbon atoms; for example, “C1-6 alkyl” (or “C1-C6 alkyl”) includes all of the hexyl alkyl and pentyl alkyl isomers as well as n-, iso-, sec- and t-butyl, n- and isopropyl, ethyl and methyl. “Alkylene” refers to both branched- and straight-chain saturated aliphatic hydrocarbon groups, including all isomers, having the specified number of carbons, and having two terminal end chain attachments; for example, the term “A-C4alkylene-B” represents, for example, A-CH2—CH2—CH2—CH2—B, A-CH2—CH2—CH(CH3)—CH2—B, A-CH2—CH(CH2CH3)—B, A-CH2—C(CH3)(CH3)—B, and the like. “Alkoxy” represents a linear or branched alkyl group of indicated number of carbon atoms attached through an oxygen bridge; for example “C1-C6 alkoxy” includes —OCH3, —OCH2CH3, —OCH(CH3)2, —O(CH2)5CH3, and the like.
Unless otherwise specifically noted as only “unsubstituted” or only “substituted”, alkyl groups are unsubstituted or substituted with 1 to 3 substituents on each carbon atom, with halo, C1-C20 alkyl, CF3, NH2, N(C1-C6 alkyl)2, NO2, oxo, CN, N3, —OH, —O(C1-C6 alkyl), C3-C10 cycloalkyl, (C3-7)cycloalkyl, (C3-5)heterocycloalkyl, C2-C6 alkenyl, C2-C6 alkynyl, (C0-C6 alkyl) S(O)0-2—, (C0-C6 alkyl)S(O)0-2(C0-C6 alkyl)-, (C0-C6 alkyl)C(O)NH—, H2N—C(NH)—, H2N—C(O)(NH)—, —O(C1-C6 alkyl)CF3, (C0-C6 alkyl)C(O)—, (C0-C6 alkyl)OC(O)—, (C0-C6 alkyl)O(C1-C6 alkyl)-, (C0-C6 alkyl)C(O)1-2(C0-C6 alkyl)-, (C0-C6 alkyl)OC(O)NH—, —NH(C1-C6 alkyl)NHC(O)NH(C1-C6 alkyl), NHC(O)OC1-C6 alkyl, —NH(C1-C6 alkyl)NHSO2(C1-C6 alkyl), —(C0-C6 alkyl)NHSO2(C1-C6 alkyl), aryl, aralkyl, heterocycle, heterocyclylalkyl, halo-aryl, halo-aralkyl, halo-heterocycle, halo-heterocyclylalkyl, cyano-aryl, cyano-aralkyl, cyano-heterocycle and cyano-heterocyclylalkyl.
The term “alkenyl” means a straight or branched carbon chain having the specified number of carbon atoms with at least one carbon-carbon double bond. Examples of alkenyl include, but are not limited to, vinyl, allyl, isopropenyl, pentenyl, hexenyl, heptenyl, 1-propenyl, 2-butenyl, 2-methyl-2-butenyl, 2,4-hexadienyl, and the like.
The term “alkynyl” means a straight or branched carbon chain having the specified number of carbon atoms with at least one carbon-carbon triple bond. Examples of alkynyl include, but are not limited to, ethynyl, propargyl, 1-propynyl, 2-butynyl, and the like.
The term “carbocycle” (and variations thereof such as “carbocyclic” or “carbocyclyl”) as used herein, unless otherwise indicated, refers to (i) a C3 to C8 monocyclic, saturated or unsaturated ring or (ii) a C7 to C12 bicyclic saturated or unsaturated ring system. Each ring in (ii) is either attached via a bond to, or fused (including spirofused) to, the other ring, and each ring is saturated or unsaturated. The carbocycle may be attached to the rest of the molecule at any carbon atom that results in a stable compound.
Saturated carbocyclics form a subset of carbocycles in which the entire ring system (mono- or polycyclic) is saturated. Saturated monocyclic carbocyclic rings are also referred to as cycloalkyl rings, e.g., cyclopropyl, cyclobutyl, etc. The fused bicyclic carbocycles are a further subset of the carbocycles in which a C7 to C10 bicyclic ring system in which each ring is saturated or unsaturated and two adjacent carbon atoms (or in the case of spirofused, one carbon atom) are shared by each of the rings in the ring system. A saturated bicyclic carbocycle is one in which both rings are saturated. An unsaturated bicyclic carbocycle is one in which one ring is unsaturated and the other is unsaturated or saturated. Unless otherwise noted, carbocycle is unsubstituted or substituted with C1-6 alkyl, C1-6 alkenyl, C1-6 alkynyl, aryl, halogen, NH2 or OH. A subset of the fused bicyclic unsaturated carbocycles are those bicyclic carbocycles in which one ring is a benzene ring and the other ring is saturated or unsaturated, with attachment via any carbon atom that results in a stable compound. Representative examples of this subset include the following:
Aromatic carbocycles form another subset of the carbocycles. The term “aryl” refers to aromatic mono- and poly-carbocyclic ring systems in which the individual carbocyclic rings in the polyring systems are fused or attached to each other via a single bond. Suitable aryl groups include phenyl, naphthyl, and biphenyl.
The term “cycloalkyl” means a cyclic ring of an alkane having the specified total ring carbon atoms; for example cyclopropyl, cyclobutyl, cyclopentyl, cyclohexyl.
The term “heterocycle” (and variations thereof such as “heterocyclic” or “heterocyclyl”) broadly refers to (i) a stable 4- to 8-membered, saturated or unsaturated monocyclic ring, or (ii) a stable 7- to 12-membered bicyclic ring system, wherein each ring in (ii) is either attached via a bond to, or fused (including spirofused) to, the other ring, and each ring is saturated or unsaturated, and the monocyclic ring or bicyclic ring system contains one or more heteroatoms (e.g., from 1 to 6 heteroatoms, or from 1 to 4 heteroatoms) selected from N, O and S and a balance of carbon atoms (the monocyclic ring typically contains at least one carbon atom and the ring systems typically contain at least two carbon atoms); and wherein any one or more of the nitrogen and sulfur heteroatoms is optionally oxidized, and any one or more of the nitrogen heteroatoms is optionally quaternized. Unless otherwise specified, the heterocyclic ring may be attached at any heteroatom or carbon atom, provided that attachment results in the creation of a stable structure. Unless otherwise specified, when the heterocyclic ring has substituents, it is understood that the substituents may be attached to any atom in the ring, whether a heteroatom or a carbon atom, provided that a stable chemical structure results.
Saturated heterocyclics form a subset of the heterocycles; i.e., the term “saturated heterocyclic” generally refers to a heterocycle as defined above in which the entire ring system (whether mono- or poly-cyclic) is saturated. The term “saturated heterocyclic ring” refers to a 4- to 8-membered saturated monocyclic ring or a stable 7- to 12-membered bicyclic ring system that consists of carbon atoms and one or more heteroatoms selected from N, O and S. Representative examples include piperidinyl, piperazinyl, azepanyl, pyrrolidinyl, pyrazolidinyl, imidazolidinyl, oxazolidinyl, isoxazolidinyl, morpholinyl, thiomorpholinyl, thiazolidinyl, isothiazolidinyl, 1,4-dioxanyl, 1,4-thioxanyl, tetrahydropyranyl, tetrahydrofuryl (or tetrahydrofuranyl), tetrahydrothienyl, and tetrahydrothiopyranyl.
Heteroaromatics form another subset of the heterocycles; i.e., the term “heteroaromatic” (alternatively “heteroaryl”) generally refers to a heterocycle as defined above in which the entire ring system (whether mono- or poly-cyclic) is an aromatic ring system. The term “heteroaromatic ring” refers a 5- or 6-membered monocyclic aromatic ring or a 7- to 12-membered bicyclic aromatic ring, and that consists of carbon atoms and one or more heteroatoms selected from N, O and S. In the case of substituted heteroaryl rings containing at least one nitrogen atom (e.g., pyridine), such substitutions can be those resulting in N-oxide formation. Representative examples of monocyclic heteroaromatic rings include pyridyl, pyrrolyl, pyrazinyl, pyrimidinyl, pyridazinyl, thienyl (or thiophenyl), thiazolyl, furanyl, imidazolyl, pyrazolyl, triazolyl, tetrazolyl, oxazolyl, isoxazolyl, oxadiazolyl, thiazolyl, isothiazolyl, and thiadiazolyl. Examples of bicyclic heteroaromatic rings include benzotriazolyl, indolyl, benzoxazolyl, benzofuranyl, benzothienyl, benzothiazolyl, benzimidazolyl, isoindolyl, indazolyl, quinoxalinyl, quinazolinyl, cinnolinyl, quinolinyl, isoquinolinyl, naphthyridinyl, pyrazolo[3,4-b]pyridine, imidazo[2,1-b](1,3)thiazole,
6-(1-pyrrolyl)-3-pyridyl, 4-(1-pyrrolyl)phenyl, 4-(pyrid-3-yl)phenyl, 4-(pyrid-4-yl)phenyl, and benzothiophenyl
Another subset of heterocycles is unsaturated heterocycles in which one or both rings are unsaturated (provided the entire ring system is not aromatic). Representative examples of unsaturated heterocycles include dihydrofuranyl, dihydrothienyl, dihydropyranyl, dihydroimidazolyl, indolinyl, isoindolinyl, chromanyl, isochromanyl, tetrahydroquinolinyl, tetrahydroisoquinolinyl, tetrahydronaphthyridinyl, 2,3-dihydrobenzofuranyl, 1,4-benzoxazinyl, 1,3-benzoxazolinyl, 2,3-dihydrobenzo-1,4-dioxinyl
and benzo-1,3-dioxolyl
In certain contexts herein,
is alternatively referred to as phenyl having as a substituent methylenedioxy attached to two adjacent carbon atoms. Also included are groups such as chromone and coumarin.
Unless otherwise specifically noted as only unsubstituted or only substituted, cycloalkyl, cycloalkenyl, heterocycloalkyl, aryl (including phenyl) and heteroaryl groups are unsubstituted or substituted (also referred to as “optionally substituted”). Unless the substituents are specifically provided, substituents for substituted or optionally substituted cycloalkyl, heterocycloalkyl, cycloalkenyl, aryl (including phenyl, and as an isolated substituent or as part of a substituent such as in aryloxy and aralkyl), heteroaryl (as an isolated substituent or as part of a substituent such as in heteroaryloxy and heteroaralkyl) are one to three groups independently selected from halogen (or halo), C1-C6 alkyl optionally substituted with one to five fluorine, NH2, N(C1-C6 alkyl)2, NO2, oxo, CN, N3, —OH, —O(C1-C6 alkyl) optionally substituted with one to five fluorine, C3-C10 cycloalkyl, (C3-7)cycloalkyl, (C3-5)heterocycloalkyl, C2-C6 alkenyl, C2-C6 alkynyl, (C0-C6 alkyl)S(O)0-2—, aryl-S(O)0-2—, (C0-C6 alkyl)S(O)0-2(C0-C6 alkylene)-, (C0-C6 alkyl)C(O)NH—, H2N—C(NH)—, (C0-C6 alkyl)C(O)—, (C0-C6 alkyl)OC(O)—, (C0-C6alkyl)O(C1-C6 alkylene)-, (C0-C6 alkyl)C(O)1-2(C0-C6 alkylene)-, (C0-C6 alkyl)2NC(O)—, (C0-C6 alkyl)OC(O)NH—, aryl, aralkyl, heteroaryl, heteroaralkyl, halo-aryl, halo-aralkyl, halo-heteroaryl, halo-heteroaralkyl, cyano-aryl, cyano-aralkyl, cyano-heteroaryl and cyano-heteroaralkyl.
The term “halogen” (or “halo”) refers to fluorine, chlorine, bromine and iodine (alternatively referred to as fluoro (F), chloro (Cl), bromo (Br), and iodo (I)).
The term “haloalkyl” means alkyl having the specified number of carbon atoms in which from one to all of the hydrogen atoms have been replaced by a halogen atom.
The terms “aralkyl” and “heteroaralkyl” refer to an aryl/heteroaryl linked to the rest of the molecule via a C1 to C4 alkylene.
The term “C0” as employed in expressions such as “C0-6 alkylene” means a direct covalent bond; or when employed in expressions such as “C0-6 alkyl” means hydrogen. Similarly, when an integer defining the presence of a certain number of atoms in a group is equal to zero, it means that the atoms adjacent thereto are connected directly by a bond; for example, in the structure
wherein s is an integer equal to zero, 1 or 2, the structure is
when s is zero; or it means that the indicated atom is absent; for example —S(O)0— means —S—.
Unless expressly stated to the contrary, an “unsaturated” ring is a partially or fully unsaturated ring. For example, an “unsaturated monocyclic C6 carbocycle” refers to cyclohexene, cyclohexadiene, and benzene.
Unless expressly stated to the contrary, all ranges cited herein are inclusive. For example, a heterocycle described as containing from “1 to 4 heteroatoms” means the heterocycle can contain 1, 2, 3 or 4 heteroatoms.
When any variable occurs more than one time in any constituent or in any formula depicting and describing compounds of the invention, its definition on each occurrence is independent of its definition at every other occurrence. Also, combinations of substituents and/or variables are permissible only if such combinations result in stable compounds. For variable definitions containing terms having repeated terms, e.g., (CRiRj)r, where r is the integer 2, Ri is a defined variable, and Rj is a defined variable, the value of Ri may differ in each instance in which it occurs, and the value of Rj may differ in each instance in which it occurs. For example, if Ri and Rj are independently selected from the group consisting of methyl, ethyl, propyl and butyl, then (CRiRj)2 can be
The term (C1-6)alkyl as used hereinabove means a branched or unbranched alkyl group having 1-6 carbon atoms, for example methyl, ethyl, propyl, isopropyl, butyl, tert-butyl, n-pentyl and n-hexyl. Preferred is (C1-4)alkyl.
The term (C1-5)alkyl means a branched or unbranched alkyl group having 1-5 carbon atoms, for example methyl, ethyl, propyl, isopropyl, butyl, tert-butyl and n-pentyl.
The term (C1-4)alkyl as used herein means a branched or unbranched alkyl group having 1-4 carbon atoms, being methyl, ethyl, n-propyl, isopropyl, n-butyl, isobutyl, sec-butyl and tert-butyl.
The term (C1-3)alkoxy means an alkoxy group having 1-3 carbon atoms, the alkyl moiety being branched or unbranched.
The term (C1-3)alkoxycarbonyl means an alkoxycarbonyl group having 1-3 carbon atoms in the alkoxy moiety, the alkoxy moiety having the same meaning as previously defined.
The term (di)(C1-6)alkylaminocarbonyl means an alkylaminocarbonyl group, the amino group of which is monosubstituted or disubstituted independently with an alkyl group which contains 1-6 carbon atoms and which has the same meaning as previously defined. Preferred alkyl group is (C1-4)alkyl.
The term (C3-7)cycloalkyl means a cycloalkyl group having 3-7 carbon atoms, such as cyclopropyl, cyclobutyl, cyclopentyl, cyclohexyl and cycloheptyl. 5-6 Carbon atoms are preferred.
The term (C3-5)heterocycloalkyl means a heterocycloalkyl group having 3-5 carbon atoms, including 1-3 heteroatoms selected from N, O and/or S, which may be attached via a nitrogen if feasible, or a carbon atom. Preferred number of heteroatoms is one or two. Most preferred number is one. Preferred heteroatoms are N or O. Most preferred are piperazinyl, tetrahydropyranyl, morpholinyl and pyrrolidinyl.
A group having the formula
means a heterocyclocarbonyl group such as
each optionally substituted with one or more (C1-10)alkyl, halogen, amino, cyano, hydroxy, and (C1-3)alkoxy.
The term (C2-9)heteroaryl means an aromatic group having 2-9 carbon atoms and 1-3 heteroatoms selected from N, O and S, like imidazolyl, thiadiazolyl, pyridinyl, pyrimidinyl, thiophenyl or furyl, pyrazolyl, isoxazolyl or quinolyl. Preferred number of heteroatoms is one or two. Preferred heteroaryl groups are pyrazolyl, thiophenyl, isoxazolyl, pyridyl and quinolyl. The (C2-5)heteroaryl group may be attached via a carbon atom or a nitrogen, if feasible.
The term (C6-14)aryl means an aromatic hydrocarbon group having 6-14 carbon atoms, such as phenyl, naphthyl, tetrahydronaphthyl, indenyl, anthracyl, More preferred are (C6-10)aryl groups. The most preferred aromatic hydrocarbon group is phenyl.
As used herein, the term “Xa-Xb”, shall have the same meaning as the term “Xa-b”, wherein X is any atom and a and b are any integers. For example, “C1-C4” shall have the same meaning as “C1-4”. Additionally, when referring to a functional group generically, “A” shall have the same meaning, and be interchangeable with, “AX”, wherein “A” is any atom and “x” or “X” are any integer. For example, “R1” shall have the same meaning, and be interchangeable with, “R1”.
In the above definitions with multifunctional groups, the attachment point is at the last group. For example, the term (C1-3)alkoxycarbonyl refers to, e.g.
and the term (C1-4)alkylcarbonyloxy refers to, e.g.
The term “substituted” means that one or more hydrogens on the designated atom/atoms is/are replaced with a selection from the indicated group, provided that the designated atom's normal valency under the existing circumstances is not exceeded, and that the substitution results in a stable compound. Combinations of substituents and/or variables are permissible only if such combinations result in stable compounds. “Stable compound” or “stable structure” is defined as a compound or structure that is sufficiently robust to survive isolation to a useful degree of purity from a reaction mixture, and formulation into an efficacious therapeutic agent. Accordingly, the term “one or more” when referring to a substituent and/or variable means that one or more hydrogens on the designated atom/atoms is/are replaced with a selection from the indicated group, provided that the designated atom's normal valency under the existing circumstances is not exceeded, and that the substitution results in a stable compound.
The term “optionally substituted” means that a substitution with the specified groups, radicals, or moieties may or may not be made on the specified group.
When, in the definition of a substituent, it is indicated that “all of the alkyl groups” of said substituent are optionally substituted, this also includes the alkyl moiety of an alkoxy group.
The use of the terms “salt”, “solvate”, “ester”, “prodrug”, and the like is intended to equally apply to the salt, solvate, ester, and prodrug of enantiomers, stereoisomers, rotamers, tautomers, positional isomers, racemates, or prodrugs of the inventive compounds.
The term “effective amount” as used herein refers to an amount of the compound of Formula (I) and/or an additional therapeutic agent, or a composition thereof, that is effective in producing the desired therapeutic, ameliorative, inhibitory or preventative effect when administered to a subject suffering from an RORgammaT-mediated disease or disorder. In the combination therapies of the present invention, as effective amount can refer to each individual agent or to the combination as a whole, wherein the amounts of all agents administered are together effective, but wherein the component agent of the combination may not be present individually in an effective amount.
A “subject” is a human or non-human mammal. In one embodiment, a subject is a human. In another embodiment, a subject is a chimpanzee.
It should be noted that any carbon as well as heteroatom with unsatisfied valences in the text, schemes, examples and tables herein is assumed to have the sufficient number of hydrogen atom(s) to satisfy the valences.
The compounds of this invention include the prodrugs, hydrates or solvates of the compounds.
The compounds of Formula I may contain asymmetric or chiral centers, and, therefore, exist in different stereoisomeric forms. It is intended that all stereoisomeric forms of the compounds of Formula (I) as well as mixtures thereof, including racemic mixtures, form part of the present invention. In addition, the present invention embraces all geometric and positional isomers. For example, if a compound of Formula (I) incorporates a double bond or a fused ring, both the cis- and trans-forms, as well as mixtures, are embraced within the scope of the invention.
Compounds described herein may contain an asymmetric center and may thus exist as enantiomers. Where the compounds according to the invention possess two or more asymmetric centers, they may additionally exist as diastereomers. The present invention includes all such possible stereoisomers as substantially pure resolved enantiomers, racemic mixtures thereof, as well as mixtures of diastereomers. The above Formula I is shown without a definitive stereochemistry at certain positions. The present invention includes all stereoisomers of Formula I and pharmaceutically acceptable salts thereof. Diastereoisomeric pairs of enantiomers may be separated by, for example, fractional crystallization from a suitable solvent, and the pair of enantiomers thus obtained may be separated into individual stereoisomers by conventional means, for example by the use of an optically active acid or base as a resolving agent or on a chiral HPLC column. Further, any enantiomer or diastereomer of a compound of the general Formula I may be obtained by stereospecific synthesis using optically pure starting materials or reagents of known configuration.
When compounds described herein contain olefinic double bonds, unless specified otherwise, such double bonds are meant to include both E and Z geometric isomers.
Some of the compounds described herein may exist with different points of attachment of hydrogen. Such compounds are referred to as tautomers. For example, compounds including carbonyl —CH2C(O)— groups (keto forms) may undergo tautomerism to form hydroxyl —CH═C(OH)— groups (enol forms). Both keto and enol forms, individually as well as mixtures thereof, are included within the scope of the present invention.
Diastereomeric mixtures can be separated into their individual diastereomers on the basis of their physical chemical differences by methods well known to those skilled in the art, such as, for example, by chromatography and/or fractional crystallization. Enantiomers can be separated by converting the enantiomeric mixture into a diastereomeric mixture by reaction with an appropriate optically active compound (e.g. chiral auxiliary such as a chiral alcohol or Mosher's acid chloride), separating the diastereomers and converting (e.g. hydrolyzing) the individual diastereomers to the corresponding pure enantiomers. Also, some of the compounds of Formula (I) may be atropisomers (e.g. substituted biaryls) and are considered as part of this invention. Enantiomers can also be separated by use of chiral HPLC column.
It is also possible that the compounds of Formula I may exist in different tautomeric forms, and all such forms are embraced within the scope of the invention. Also, for example, all keto-enol and imine-enamine forms of the compounds are included in the invention.
All stereoisomers (for example, geometric isomers, optical isomers and the like) of the present compounds (including those of the salts, solvates, esters, and prodrugs of the compounds as well as the salts, solvates, and esters of the prodrugs), such as those that may exist due to asymmetric carbons on various substituents, including enantiomeric forms (which may exist even in the absence of asymmetric carbons), rotameric forms, atropisomers, and diastereomeric forms, are contemplated within the scope of this invention, as are positional isomers. Individual stereoisomers of the compounds of the invention may, for example, be substantially free of other isomers, or may be admixed, for example, as racemates or with all other, or other selected, stereoisomers. The chiral centers of the present invention can have the S or R configuration as defined by the IUPAC1974 Recommendations.
The term “pharmaceutically acceptable salts” refers to salts prepared from pharmaceutically acceptable non-toxic bases or acids. When the compound of the present invention is acidic, its corresponding salt can be conveniently prepared from pharmaceutically acceptable non-toxic bases, including inorganic bases and organic bases. Salts derived from such inorganic bases include aluminum, ammonium, calcium, copper (ic and ous), ferric, ferrous, lithium, magnesium, manganese (ic and ous), potassium, sodium, zinc and the like salts. Preferred are the ammonium, calcium, magnesium, potassium and sodium salts. Salts prepared from pharmaceutically acceptable organic non-toxic bases include salts of primary, secondary, and tertiary amines derived from both naturally occurring and synthetic sources. Pharmaceutically acceptable organic non-toxic bases from which salts can be formed include, for example, arginine, betaine, caffeine, choline, N,N′-dibenzyl-ethylenediamine, diethylamine, 2-diethylaminoethanol, 2-dimethylaminoethanol, ethanolamine, ethylenediamine, N-ethylmorpholine, N-ethylpiperidine, glucamine, glucosamine, histidine, hydrabamine, isopropylamine, dicyclohexylamine, lysine, methylglucamine, morpholine, piperazine, piperidine, polyamine resins, procaine, purines, theobromine, triethylamine, trimethylamine, tripropylamine, tromethamine and the like.
When the compound of the present invention is basic, its corresponding salt can be conveniently prepared from pharmaceutically acceptable non-toxic inorganic and organic acids. Such acids include, for example, acetic, benzenesulfonic, benzoic, camphorsulfonic, citric, ethanesulfonic, fumaric, gluconic, glutamic, hydrobromic, hydrochloric, isethionic, lactic, maleic, malic, mandelic, methanesulfonic, mucic, nitric, pamoic, pantothenic, phosphoric, succinic, sulfuric, tartaric, p-toluenesulfonic acid and the like. Preferred are citric, hydrobromic, hydrochloric, maleic, phosphoric, sulfuric, and tartaric acids.
The compounds of Formula I can form salts which are also within the scope of this invention. Reference to a compound of Formula I herein is understood to include reference to salts thereof, unless otherwise indicated.
The term pharmaceutically acceptable salt represents those salts that are, within the scope of medical judgment, suitable for use in contact for the tissues of humans and lower animals without undue toxicity, irritation, allergic response and the like, and are commensurate with a reasonable benefit/risk ratio. Pharmaceutically acceptable salts are well known in the art. They may be obtained during the final isolation and purification of the compounds of the invention, or separately by reacting the free base function with a suitable mineral acid such as hydrochloric acid, phosphoric acid, or sulfuric acid, or with an organic acid such as for example ascorbic acid, citric acid, tartaric acid, lactic acid, maleic acid, malonic acid, fumaric acid, glycolic acid, succinic acid, propionic acid, acetic acid, methanesulfonic acid, and the like. The acid function can be reacted with an organic or a mineral base, like sodium hydroxide, potassium hydroxide, calcium hydroxide, calcium carbonate, ammonium (e.g. diethylamine) or lithium hydroxide.
The present invention includes within its scope solvates of compounds of Formula I. As used herein, the term “solvate” refers to a complex of variable stoichiometry formed by a solute (i.e., a compound of Formula I) or a pharmaceutically acceptable salt thereof and a solvent that does not interfere with the biological activity of the solute. Examples of solvents include but are not limited to water, ethanol, and acetic acid. When the solvent is water, the solvate is known as hydrate; hydrate includes, but is not limited to, hemi-, mono, sesqui-, di- and trihydrates.
The compounds of the invention may form hydrates or solvates. It is known to those of skill in the art that charged compounds form hydrated species when lyophilized with water, or form solvated species when concentrated in a solution with an appropriate organic solvent.
One or more compounds of the invention may exist in unsolvated as well as solvated forms with pharmaceutically acceptable solvents such as water, ethanol, and the like, and it is intended that the invention embrace both solvated and unsolvated forms. “Solvate” may also mean a physical association of a compound of this invention with one or more solvent molecules. This physical association involves varying degrees of ionic and covalent bonding, including hydrogen bonding. In certain instances the solvate will be capable of isolation, for example when one or more solvent molecules are incorporated in the crystal lattice of the crystalline solid. “Solvate” encompasses both solution-phase and isolatable solvates. Non-limiting examples of suitable solvates include ethanolates, methanolates, and the like. “Hydrate” is a solvate wherein the solvent molecule is H2O.
The present invention includes within its scope the use prodrugs of the compounds of this invention. In general, such prodrugs will be functional derivatives of the compounds of this invention which are readily convertible in vivo into the required compound. Thus, in the methods of treatment of the present invention, the term “administering” shall encompass the treatment of the various conditions described with a compound of formula I or with a compound that may not be a compound of formula I, but that converts to a compound of formula I in vivo after administration to the patient. Conventional procedures for the selection and preparation of suitable prodrug derivatives are described, for example, in “Design of Prodrugs,” ed. H. Bundgaard, Elsevier, 1985.
The term “prodrug” means a compound (e.g., a drug precursor) that is transformed in vivo to yield a compound of Formula I or a pharmaceutically acceptable salt, hydrate or solvate of the compound. The transformation may occur by various mechanisms (e.g., by metabolic or chemical processes), such as, for example, through hydrolysis in blood. A discussion of prodrugs and the use of prodrugs is provided by T. Higuchi and W. Stella, “Prodrugs as Novel Delivery Systems,” Vol. 14 of the A.C.S. Symposium Series, 1987; and in Bioreversible Carriers in Drug Design, ed. Edward B. Roche, American Pharmaceutical Association and Pergamon Press, 1987.
In the compounds of generic Formula I, the atoms may exhibit their natural isotopic abundances, or one or more of the atoms may be artificially enriched in a particular isotope having the same atomic number, but an atomic mass or mass number different from the atomic mass or mass number predominantly found in nature. The present invention is meant to include all suitable isotopic variations of the compounds of generic Formula I. For example, different isotopic forms of hydrogen (H) include protium (1H) and deuterium (2H). Protium is the predominant hydrogen isotope found in nature. Enriching for deuterium may afford certain therapeutic advantages, such as increasing in vivo half-life or reducing dosage requirements, or may provide a compound useful as a standard for characterization of biological samples. In light of the present disclosure, isotopically-enriched compounds within generic Formula I can be prepared without undue experimentation by conventional techniques well known to those skilled in the art or by processes analogous to those described in the Schemes and Examples herein using appropriate isotopically-enriched reagents and/or intermediates.
Compounds of the present invention alter the interaction of coregulator proteins with Retinoic Acid Receptor-related Orphan Receptor gamma t (RORgammaT) and thereby antagonize RORgammaT-mediated transcriptional activity, and as such are useful in the treatment of diseases and conditions in which inhibition of RORgammaT is desirable, such as autoimmune and inflammatory diseases and disorders.
Accordingly, another embodiment of the present invention provides a method for treating a disease or condition mediated by RORgammaT in a subject comprising administering to the subject an amount of a compound having Formula I, Ia, Ib, Ic, Id, Ie, If, Ig or Ih, or a pharmaceutically acceptable salt or solvate thereof, that is effective for treating the disease or condition mediated by RORgammaT in the subject.
The compounds according to the invention can be used in therapy.
A further aspect of the invention resides in the use of compounds according to the invention or a pharmaceutically acceptable salt thereof for the treatment of RORgammaT-mediated diseases or RORgammaT mediated conditions.
Another aspect of the invention resides in the use of compounds or a pharmaceutically acceptable salt thereof having the general formula I for the treatment of autoimmune diseases, in particular those diseases in which Th17 cells and non-Th17 cells, which express Th17 hallmark cytokines, play a prominent role. These include, but are not limited to, the treatment of rheumatoid arthritis, psoriasis, inflammatory bowel disease, Crohn's disease, ankylosing spondylitis and multiple sclerosis.
In another aspect, compounds or a pharmaceutically acceptable salt thereof having the general formula I can be used for treatment of inflammatory diseases in which Th17 cells and/or non-Th17 cells, which express Th17 hallmark cytokines, play a prominent role, such as but not limited to respiratory diseases, osteoarthritis and asthma. Also, compounds or a pharmaceutically acceptable salt thereof having the general formula I can be used for treatment of infectious diseases in which Th17 cells and/or non-Th17 cells, which express Th17 hallmark cytokines, play a prominent role, such as but not limited to mucosal leishmaniasis.
Compounds or a pharmaceutically acceptable salt thereof having the general formula I can also be used for treatment of other diseases in which Th17 cells and/or non-Th17 cells, which express Th17 hallmark cytokines, play a prominent role, such as but not limited to Kawasaki disease and Hashimoto's thyroiditis.
In one aspect the disease or condition is an autoimmune disease or inflammatory disease. The disease or condition includes, but is not limited to, multiple sclerosis, inflammatory bowel disease, Crohn's disease, ankylosing spondylitis, psoriasis, rheumatoid arthritis, asthma, osteoarthritis, Kawasaki disease, Hashimoto's thyroiditis or mucosal leishmaniasis.
In another aspect, the compounds according to the invention can be used in therapies to treat or prevent multiple sclerosis, inflammatory bowel disease, Crohn's disease, psoriasis, rheumatoid arthritis, asthma, osteoarthritis, Kawasaki disease, Hashimoto's thyroiditis and mucosal leishmaniasis.
In another aspect the compounds according to the invention can be used to treat or prevent psoriasis.
In yet another aspect the compounds according to the invention can be used to treat inflammatory bowel disease.
This aspect of the present invention further includes the use of a compound of Formula I, Ia, Ib, Ic, Id, Ie, If, Ig or Ih, or a pharmaceutically acceptable salt or solvate thereof, in the manufacture of a medicament for the treatment of a disease or condition mediated by RORgammaT.
The compounds of this invention can be administered for the treatment or prevention of afflictions, diseases and illnesses according to the invention by any means that effects contact of the active ingredient compound with the site of action in the body of a warm-blooded animal. For example, administration can be oral, topical, including transdermal, ocular, buccal, intranasal, inhalation, intravaginal, rectal, intracisternal and parenteral. The term “parenteral” as used herein refers to modes of administration that include subcutaneous, intravenous, intramuscular, intraarticular injection or infusion, intrasternal and intraperitoneal. For the purpose of this disclosure, a warm-blooded animal is a member of the animal kingdom possessed of a homeostatic mechanism and includes mammals and birds.
The compounds can be administered by any conventional means available for use in conjunction with pharmaceuticals, either as individual therapeutic agents or in a combination of therapeutic agents. They can be administered alone, but are generally administered with a pharmaceutical carrier selected on the basis of the chosen route of administration and standard pharmaceutical practice.
The dosage administered will be dependent on the age, health and weight of the recipient, the extent of disease, kind of concurrent treatment, if any, frequency of treatment and the nature of the effect desired. Usually, a daily dosage of active ingredient compound will be from about 1.0-2000 milligrams per day. Ordinarily, from 10 to 500 milligrams per day in one or more applications is effective to obtain desired results. These dosages are the effective amounts for the treatment and prevention of afflictions, diseases and illnesses described above, e.g., autoimmune and inflammatory diseases and disorders.
Compositions include e.g. those suitable for oral, sublingual, subcutaneous, intravenous, intramuscular, nasal, local, or rectal administration, and the like, all in unit dosage forms for administration.
For oral administration, the active ingredient may be presented as discrete units, such as tablets, capsules, powders, granulates, solutions, suspensions, and the like. For parenteral administration, the pharmaceutical composition of the invention may be presented in unit-dose or multi-dose containers, e.g. injection liquids in predetermined amounts, for example in sealed vials and ampoules, and may also be stored in a freeze dried (lyophilized) condition requiring only the addition of sterile liquid carrier, e.g. water, prior to use.
Mixed with such pharmaceutically acceptable auxiliaries, e.g. as described in the standard reference, Gennaro, A. R. et al., Remington: The Science and Practice of Pharmacy (20th Edition., Lippincott Williams & Wilkins, 2000, see especially Part 5: Pharmaceutical Manufacturing), the active agent may be compressed into solid dosage units, such as pills, tablets, or be processed into capsules or suppositories. By means of pharmaceutically acceptable liquids the active agent can be applied as a fluid composition, e.g. as an injection preparation, in the form of a solution, suspension, emulsion, or as a spray, e.g. a nasal spray. For making solid dosage units, the use of conventional additives such as fillers, colorants, polymeric binders and the like is contemplated. In general any pharmaceutically acceptable additive that does not interfere with the function of the active compounds can be used. Suitable carriers with which the active agent of the invention can be administered as solid compositions include lactose, starch, cellulose derivatives and the like, or mixtures thereof, used in suitable amounts. For parenteral administration, aqueous suspensions, isotonic saline solutions and sterile injectable solutions may be used, containing pharmaceutically acceptable dispersing agents and/or wetting agents, such as propylene glycol or butylene glycol.
Another aspect of the present invention provides pharmaceutical compositions comprising a compound of Formula I or a pharmaceutically acceptable salt or solvate thereof and one or more pharmaceutically acceptable excipients. The term “excipient” and “carrier” may be used interchangeably. The term “composition”, as in pharmaceutical composition, is intended to encompass a product comprising the active ingredient(s), and the inert ingredient(s) (pharmaceutically acceptable excipients) that make up the carrier, as well as any product that results, directly or indirectly, from combination, complexation or aggregation of any two or more of the ingredients, or from dissociation of one or more of the ingredients, or from other types of reactions or interactions of one or more of the ingredients. Accordingly, the pharmaceutical compositions of the present invention encompass any composition made by admixing a compound of Formula I, additional active ingredient(s), and pharmaceutically acceptable excipients.
The pharmaceutical compositions of the present invention comprise a compound represented by Formula I (or pharmaceutically acceptable salts thereof) as an active ingredient, a pharmaceutically acceptable carrier and optionally other therapeutic ingredients or adjuvants. The compositions include compositions suitable for oral, rectal, topical, and parenteral (including subcutaneous, intramuscular, and intravenous) administration, although the most suitable route in any given case will depend on the particular host, and nature and severity of the conditions for which the active ingredient is being administered. The pharmaceutical compositions may be conveniently presented in unit dosage form and prepared by any of the methods well known in the art of pharmacy.
The active ingredient can be administered orally in solid dosage forms, such as capsules, tablets, troches, dragées, granules and powders, or in liquid dosage forms, such as elixirs, syrups, emulsions, dispersions, and suspensions. The active ingredient can also be administered parenterally, in sterile liquid dosage forms, such as dispersions, suspensions or solutions. Other dosages forms that can also be used to administer the active ingredient as an ointment, cream, drops, transdermal patch or powder for topical administration, as an ophthalmic solution or suspension formation, i.e., eye drops, for ocular administration, as an aerosol spray or powder composition for inhalation or intranasal administration, or as a cream, ointment, spray or suppository for rectal or vaginal administration.
Gelatin capsules contain the active ingredient and powdered carriers, such as lactose, starch, cellulose derivatives, magnesium stearate, stearic acid, and the like. Similar diluents can be used to make compressed tablets. Both tablets and capsules can be manufactured as sustained release products to provide for continuous release of medication over a period of hours. Compressed tablets can be sugar coated or film coated to mask any unpleasant taste and protect the tablet from the atmosphere, or enteric coated for selective disintegration in the gastrointestinal tract.
Liquid dosage forms for oral administration can contain coloring and flavoring to increase patient acceptance.
In general, water, a suitable oil, saline, aqueous dextrose (glucose), and related sugar solutions and glycols such as propylene glycol or polyethylene glycols are suitable carriers for parenteral solutions. Solutions for parenteral administration preferably contain a water soluble salt of the active ingredient, suitable stabilizing agents, and if necessary, buffer substances. Antioxidizing agents such as sodium bisulfite, sodium sulfite, or ascorbic acid, either alone or combined, are suitable stabilizing agents. Also used are citric acid and its salts and sodium EDTA. In addition, parenteral solutions can contain preservatives, such as benzalkonium chloride, methyl- or propylparaben, and chlorobutanol.
Suitable pharmaceutical carriers are described in Remington's Pharmaceutical Sciences, A. Osol, a standard reference text in this field.
For administration by inhalation, the compounds of the present invention may be conveniently delivered in the form of an aerosol spray presentation from pressurized packs or nebulizers. The compounds may also be delivered as powders which may be formulated and the powder composition may be inhaled with the aid of an insufflation powder inhaler device. The preferred delivery system for inhalation is a metered dose inhalation (MDI) aerosol, which may be formulated as a suspension or solution of a compound of Formula I in suitable propellants, such as fluorocarbons or hydrocarbons.
For ocular administration, an ophthalmic preparation may be formulated with an appropriate weight percent solution or suspension of the compounds of Formula I in an appropriate ophthalmic vehicle, such that the compound is maintained in contact with the ocular surface for a sufficient time period to allow the compound to penetrate the corneal and internal regions of the eye.
Useful pharmaceutical dosage-forms for administration of the compounds of this invention include, but are not limited to, hard and soft gelatin capsules, tablets, parenteral injectables, and oral suspensions.
A large number of unit capsules are prepared by filling standard two-piece hard gelatin capsules each with 100 milligrams of powdered active ingredient, 150 milligrams of lactose, 50 milligrams of cellulose, and 6 milligrams magnesium stearate.
A mixture of active ingredient in a digestible oil such as soybean oil, cottonseed oil or olive oil is prepared and injected by means of a positive displacement pump into gelatin to form soft gelatin capsules containing 100 milligrams of the active ingredient. The capsules are washed and dried.
A large number of tablets are prepared by conventional procedures so that the dosage unit is 100 milligrams of active ingredient, 0.2 milligrams of colloidal silicon dioxide, 5 milligrams of magnesium stearate, 275 milligrams of microcrystalline cellulose, 11 milligrams of starch and 98.8 milligrams of lactose. Appropriate coatings may be applied to increase palatability or delay absorption.
A parenteral composition suitable for administration by injection is prepared by stirring 1.5% by weight of active ingredient in 10% by volume propylene glycol. The solution is made to volume with water for injection and sterilized.
An aqueous suspension is prepared for oral administration so that each 5 milliliters contain 100 milligrams of finely divided active ingredient, 100 milligrams of sodium carboxymethyl cellulose, 5 milligrams of sodium benzoate, 1.0 grams of sorbitol solution, U.S.P., and 0.025 milliliters of vanillin.
The same dosage forms can generally be used when the compounds of this invention are administered stepwise or in conjunction with another therapeutic agent. When drugs are administered in physical combination, the dosage form and administration route should be selected depending on the compatibility of the combined drugs. Thus the term coadministration is understood to include the administration of the two agents concomitantly or sequentially, or alternatively as a fixed dose combination of the two active components.
The present invention also relates to a pharmaceutical composition comprising compounds or pharmaceutically acceptable salts thereof having the general formula I in admixture with pharmaceutically acceptable auxiliaries and optionally other therapeutic agents. The auxiliaries must be “acceptable” in the sense of being compatible with the other ingredients of the composition and not deleterious to the recipients thereof.
The invention further includes a pharmaceutical composition, as hereinbefore described, in combination with packaging material suitable for said composition, said packaging material including instructions for the use of the composition for the use as hereinbefore described.
The exact dose and regimen of administration of the active ingredient, or a pharmaceutical composition thereof, may vary with the particular compound, the route of administration, and the age and condition of the individual subject to whom the medicament is to be administered.
In general parenteral administration requires lower dosages than other methods of administration which are more dependent upon absorption. However, a dosage for humans preferably contains 0.0001-100 mg per kg body weight. The desired dose may be presented as one dose or as multiple subdoses administered at appropriate intervals throughout the day. The dosage as well as the regimen of administration may differ between a female and a male recipient.
Compounds of the present invention, and their salts and solvates, and physiologically functional derivatives thereof, may be employed alone or in combination with other therapeutic agents for the treatment of diseases and conditions associated with inappropriate IL-17 pathway activity. Combination therapies according to the present invention thus comprise the administration of at least one compound of formula (I) or a pharmaceutically acceptable salt or solvate thereof, or a physiologically functional derivative thereof, and the use of at least one other pharmaceutically active agent. The compound(s) of formula (I) and the other pharmaceutically active agent(s) may be administered together or separately and, when administered separately this may occur simultaneously or sequentially in any order. The amounts of the compound(s) of formula (I) and the other pharmaceutically active agent(s) and the relative timings of administration will be selected in order to achieve the desired combined therapeutic effect. For the treatment of the inflammatory and autoimmune diseases, rheumatoid arthritis, psoriasis, inflammatory bowel disease, ankylosing spondylitis, SLE, uveitis, atopic dermatitis, COPD, asthma and allergic rhinitis a compound of formula (I) may be combined with one or more other active agents such as: (1) TNF-α inhibitors; (2) non-selective COX-I/COX-2 inhibitors; (3) COX-2 inhibitors; (4) other agents for treatment of inflammatory and autoimmune diseases including glucocorticoids, methotrexate, leflunomide, sulfasalazine, azathioprine, cyclosporin, tacrolimus, penicillamine, bucillamine, actarit, mizoribine, lobenzarit, ciclesonide, hydroxychloroquine, d-penicillamine, aurothiomalate, auranofin or parenteral or oral gold, cyclophosphamide, Lymphostat-B, BAFF/APRIL inhibitors and CTLA-4-Ig or mimetics thereof; (5) leukotriene biosynthesis inhibitor, 5-lipoxygenase (5-LO) inhibitor or 5-lipoxygenase activating protein (FLAP) antagonist; (6) LTD4 receptor antagonist; (7) PDE4 inhibitor; (8) antihistamine HI receptor antagonists; (9) a1- and a2-adrenoceptor agonist; (10) anticholinergic agents; (11) β-adrenoceptor agonists; (12) insulin-like growth factor type I (IGF-1) mimetic; (13) glucocorticosteroids; (14) kinase inhibitors such as inhibitors of the Janus Kinases (JAK1 and/or JAK2 and/or JAK3 and/or TYK2), p38 MAPK and IKK2; (15) B-cell targeting biologies such as rituximab; (16) selective costimulation modulators such as abatacept; (17) interleukin inhibitors, such as IL-1 inhibitor anakinra, IL-6 inhibitor tocilizumab, and IL12/IL-23 inhibitor ustekinumab. It could also be combined with anti-IL17 antibodies to obtain additive/synergistic responses for the treatment of inflammatory and autoimmune diseases.
It will be clear to a person skilled in the art that, where appropriate, the other therapeutic ingredient(s) may be used in the form of salts, for example as alkali metal or amine salts or as acid addition salts, or prodrugs, or as esters, for example lower alkyl esters, or as solvates, for example hydrates, to optimize the activity and/or stability and/or physical characteristics, such as solubility, of the therapeutic ingredient. It will be clear also that, where appropriate, the therapeutic ingredients may be used in optically pure form.
The combinations referred to above may conveniently be presented for use in the form of a pharmaceutical composition and thus pharmaceutical compositions comprising a combination as defined above together with a pharmaceutically acceptable diluent or carrier represent a further aspect of the invention. These combinations are of particular interest in respiratory diseases and are conveniently adapted for inhaled or intranasal delivery.
The individual compounds of such combinations may be administered either sequentially or simultaneously in separate or combined pharmaceutical compositions. Preferably, the individual compounds will be administered simultaneously in a combined pharmaceutical composition. Appropriate doses of known therapeutic agents will be readily appreciated by those skilled in the art.
Accordingly, the pharmaceutical compositions of the present invention include those that also comprise at least one additional therapeutically active agent, in addition to the compound of Formula I, Ia, Ib, Ic, Id, Ie, If, Ig or Ih.
The invention further includes a compound of Formula I in combination with one or more other drug(s).
Methods for preparing the compounds of this invention are illustrated in the following schemes and examples. Other synthetic protocols will be readily apparent to those skilled in the art in light of the present disclosure. The examples illustrate the preparation of the compounds of formula I and as such are not to be considered as limiting the invention set forth in the claims appended hereto. Unless otherwise indicated, all variables are as previously defined.
All the end products of the formula I were analyzed by NMR and/or LCMS. Intermediates were analyzed by NMR and/or TLC and/or LCMS. Most compounds were purified by reverse phase HPLC, MPLC on silica gel, recrystallization and/or swish (suspension in a solvent followed by filtration of the solid). The course of the reactions was followed by thin layer chromatography (TLC) and/or LCMS and/or NMR and reaction times are given for illustration only.
Abbreviations used herein are as follows: EtOAc: Ethyl acetate; PE: Petroleum ether; EA: Ethyl acetate; DCM: Dichloro methane; DMF: N,N-Dimethylformamide; Dppf: 1,1′-Bis(diphenylphosphino)ferrocene; AcOH: Acetic acid; DMAC: N,N-Dimethylacetamide; DMAP: N,N-dimethylpyridin-4-amine; TEA: Triethylamine; PYAOP: (7-Azabenzotriazol-1-yloxy)tripyrrolidinophosphonium hexafluorophosphate; Pd(PPh3)4:Tetrakis (Triphenylphosphine)Palladium(0); Pd(dppf)Cl2: [1,1′-Bis(diphenylphosphino) ferrocene]dichloropalladium (II); Pd2(dba)3: Tris(dibenzylideneacetone)dipalladium(0); BnBr: Benzyl bromide; Ac2O: Acetic an hydride; LiHMDS: Lithium bis(trimethylsilyl)amide; PhNTf2: N-Phenyl-bis(trifluoromethane sulfonimide); S-Phos: 2-Dicyclohexylphosphino-2′,6′-dimethoxybiphenyl; X-Phos: 2-Dicyclohexylphosphino-2′,4′,6′-triisopropylbiphenyl; CPME: Cyclopentyl methyl ether.
Scheme 1 illustrates a general method toward the preparation of compounds of formula I. Starting from halide A, N-acylation with either carboxylic acids or corresponding acid chloride in the presence of base led to the formation of compound B. Subsequent Suzuki coupling with pinacol boronic ester or acid followed by ester hydrolysis afforded the final compound. In certain cases, ester hydrolysis occurred under the Suzuki coupling condition and led to the formation of final product within one pot.
Alternatively the final compound I could also be prepared by switching the order of reaction sequence between acylation and Suzuki coupling (see Scheme 2). Suzuki coupling first by reacting halide A with pinacol boronic ester or acid gave intermediate B. Subsequent acylation in the presence of appropriate base, followed by hydrolysis, furnished final product. In some cases where the amide was unstable under hydrolysis conditions, the ester moiety could be hydrolyzed first followed by reacting with acid or acid chloride to give the final product.
Scheme 3 illustrates a general method for the preparation of compounds of formula I that contain an amide moiety at A6 position. Starting from halide A, acylation followed by ester hydrolysis gave intermediate B. Subsequent Suzuki coupling afforded acid C. Standard amide coupling followed by hydrolysis led to the formation of the final product.
Scheme 4 illustrates a general method for compounds containing aryl or heteroaryl substituents at A6 position. Starting from halide A, acylation followed by Suzuki compound furnished common intermediate B. Subsequent Suzuki coupling and ester hydrolysis gave the final product. Alternatively, Compound B could be converted into pinacol boronic ester or acid first, followed by subsequent Suzuki coupling with appropriate aryl or heteraryl halide and hydrolysis, delivered the final product.
Scheme 5 illustrates a general method for the preparation of compounds containing amine or lactam moiety at A6 position. Starting from common intermediate A (see Scheme 4 for its preparation), Pd-catalyzed reaction with primary or secondary amines or lactams followed by ester hydrolysis furnished the final product.
Scheme 6 illustrates a general method for the preparation of compounds that contain alcohol or ketone moiety at A6 position. Starting with halide A, acylation followed by reduction of the ester moiety with reducing agent (such as DIBAL-H) afforded compound B. Suzuki coupling with boronic ester or acid gave compound C. Oxidation of the primary alcohol, followed by reacting with Grignard reagent and subsequent ester hydrolysis, gave the final compound I. Alternatively, oxidation of the product from Grignard addition, followed by ester hydrolysis, afforded ketone derivative I′.
Scheme 7 illustrates a general method for the preparation of compounds that contain amide, sulfonamides or carbamate of primary or secondary amines at A6 position. Starting from compound A, acylation followed by reduction of NO2 with reducing agent (such as SnCl2) afforded compound B. Subsequent Suzuki coupling gave common intermediate C. Standard amide, sulfonamide, or carbamate formation reactions followed by ester hydrolysis gave the final compounds I. Alternatively, compound C could be alkylated first with halide in the presence of base to afford a new intermediate which contains a secondary amine. Subsequent standard formation of amides, sulfonamides and carbamates and hydrolysis furnish the final compounds.
Scheme 8 illustrates a general strategy for the preparation of compounds that contain heteroaryl substituents at A6 position, but cannot be accessed through Suzuki coupling as shown in Scheme 4. Starting from carboxylic acid A (see scheme 4 for its synthesis), amide coupling afforded intermediate B. Subsequent cyclization by reacting with POCl3 in the presence of pyridine, followed by ester hydrolysis, led to the formation of final product I, which contains an oxazole substituent at A6 position. The same strategy was also used for the synthesis of a number of other analogs containing different heterocycles at this position. Construction of those heterocycles can follow those well-known routes in the literature.
Scheme 9 illustrates a general strategy for the preparation of compounds that contain tri-substituted benzamide motif. Starting from unprotected indazole or indole A, acylation with bromo-substituted benzoic acid chloride B provided intermediate C. Subsequent coupling with various coupling reagents can convert bromine into a variety of substituents such as amine, hydroxyl, alkoxy etc. Final hydrolysis led to the formation of final product I.
Scheme 10 illustrates an alternative method to access intermediate B. Instead of direct Suzuki coupling to form B from A, which typically suffered from low to moderate yield, protection with THP first to give intermediate C, followed by Suzuki coupling and deprotection, could improve the overall yield significantly in some cases.
The following table lists commercial sources, and previously disclosed synthetic routes for chemical materials employed in the synthesis of intermediates and that can be used in the synthesis of examples of the instant invention. The list is not intended to be exhaustive, exclusive, or limiting in any way.
LiOH.H2O (180 mg, 4.24 mmol) was added to a solution of 2-bromo-6-chlorobenzoic acid (i-1a) (1.0 g, 4.24 mmol) in THF (30 ml). The mixture was stirred at 25° C. for 1 h. Then the Me2SO4 (1.1 g, 8.48 mmol) was added to the reaction mixture. The mixture was warmed to 85° C. and stirred at 85° C. for 21 h. After cooling, NH3.H2O was added dropwise to the mixture until pH=7-8. The solution was poured into water and THF was evaporated. The water layer was extracted with EA (60 ml). The organic layer was dried over Na2SO4 and concentrated to obtain 800 mg (75%) of the title compound. LCMS (ESI): calc'd for C8H6BrClO2 [M+H]+: 251. found: 251.
Methyl 2-bromo-6-chlorobenzoate (i-1b) (0.8 g, 3.2 mmol), cyclopropylboronic acid (330 mg, 3.84 mmol), Pd(OAc)2 (72 mg, 0.32 mmol), Cy3P (180 mg, 0.64 mmol) and K3PO4 (2.0 g, 9.6 mmol) were mixed in toluene (12 ml) and H2O (1.2 ml). The reaction mixture was stirred at 100° C. overnight under N2 atmosphere. After cooling, the mixture was poured into water (30 ml) and extracted with EA (50 ml). The organic layer was dried over Na2SO4 and concentrated to obtain a residue. The residue was purified by chromatography on silica gel (PE/EA=10:1) to obtain 350 mg (52%) of the title compound. LCMS (ESI): calc'd for C11H11ClO2 [M+H]+: 211. found: 211.
To a suspension of anhydrous MgI2 (880 mg, 3.18 mmol) in toluene (15 ml) was added a solution of methyl 2-chloro-6-cyclopropylbenzoate (i-1c) (400 mg, 1.9 mmol) in toluene (5 ml). The mixture was refluxed under exclusion of moisture, cooled and poured into 10% aqueous NaHCO3 (20 ml). The acid was isolated by acidification of the aqueous phase with 15% HCl followed by extraction with EA. The combined organic layers were washed with water, dried over Na2SO4 and concentrated to obtain the crude product. The crude product was purified by chromatography on silica gel (PE/EA=3:1) to obtain 200 mg (54%) of the title compound. LCMS (ESI): calc'd for C10H9ClO2[M+H]+: 197. found: 197.
To the solution of 2-chloro-6-hydroxybenzoic acid (i-2a) (1.71 g, 10 mmol) in CH3OH (100 ml) was added concentrated sulfuric acid (10 ml) drop wise. The mixture solution was protected by N2 and stirred at 85° C. for 30 h. The solution was concentrated and purified by chromatography column (EA:PE=1:4) to afford 1.5 g product (81%). LCMS (ESI) calc'd [M+H]+: 186.59. found: 187.0.
The mixture of i-2b (186 mg, 1 mmol), bromocyclopropane (1.2 g, 10.0 mmol), Cs2CO3 (414 mg, 3.0 mmol), DMAC (15 ml) was protected by N2 and stirred at 150° C. for 24 h. Then the reaction mixture was filtered, concentrated, and purified by chromatography column (EA: PE=1:4) to afford 198 mg product (87%). LCMS (ESI) calc'd [M+H]+: 226.66. found: 227.1.
To the solution of 2-chloro-6-cyclopropoxybenzoate (i-2c) (226 mg, 1.0 mmol) in CH3OH (10 ml) and H2O (10 ml) was added KOH (200 mg). The mixture solution was stirred at 85° C. for 12 h, the solution was acidified by aqueous HCl (1M) 50 ml, extracted with EA (30 ml×3), concentrated and purified by chromatography column (EA:PE=1:1) to afford 186 mg product (87%). LCMS (ESI) calc'd [M+H]+: 212.63. found: 212.9.
To the solution of methyl 2-chloro-6-cyclopropoxybenzoic acid (i-2d) (212 mg, 1 mmol) and DMF (0.1 ml) dissolved in anhydrous DCM (10 ml) was added oxalyl chloride (190 mg, 1.5 mmol) dropwise. The mixture solution was protected by N2 and stirred at room temperature for 0.5 h. Then the solution was concentrated to afford 300 mg (crude) for the next step without further purification.
To a mixture of 2-bromo-6-chlorobenzoate (1.0 g, 4.0 mmol), 4,4,5,5-tetramethyl-2-vinyl-1,3,2-dioxaborolane (0.92 g, 6 mmol), Pd(PPh3)4 (230 mg, 0.2 mmol) and K2CO3 (1.66 g, 12 mmol) was added dioxane (10 ml) and H2O (2.5 ml), and the mixture was heated at 100° C. under microwave for 3 h. The mixture was cooled down, and diluted with EtOAc (50 ml). The organic layer was separated, washed with brine, dried over Na2SO4 and concentrated. The residue was purified by flash chromatography (Petroleum/EtOAc 10/1) to give 0.4 g (51%) of the title compound. LCMS (ESI) calc'd for C10H9ClO2 [M+H]+: 197. found: 197.
To a solution of methyl 2-chloro-6-vinylbenzoate (i-3a) (0.2 g, 1.02 mmol) in EtOH (15 ml) and H2O (7 ml) was added NaOH (0.4 g, 10 mmol). The resulting mixture was stirred at 80° C. for 2 h. The mixture was cooled down and acidified with 2N HCl to pH=2-3. Then the mixture was extracted with EA (30 ml). The organic layer was dried over Na2SO4 and concentrated to afford 160 mg (86%) of the title compound. LCMS (ESI) calc'd for C9H7ClO2 [M+H]+: 183. found: 183.
A mixture of 2-bromo-6-chlorobenzoic acid (472 mg, 2 mmol), 4,4,5,5-tetramethyl-2-(prop-1-en-2-yl)-1,3,2-dioxaborolane (400 mg, 2.4 mmol), Pd(PPh3)4 (115 mg, 0.1 mmol), K2CO3 (1238 mg, 9.0 mmol), dioxane (3 mL) and H2O (0.5 mL) was protected by N2 and stirred at 100° C. for 1 h. Then the reaction mixture was filtered, concentrated and purified by chromatography column (EA:PE=1:5) to afford 200 mg of the title compound (yield: 51%). LCMS (ESI) calc'd C10H9ClO2, [M+H]+: 197. found: 197.
To the solution of 1,4-dibromo-2,5-difluorobenzene (i-6a) (27.0 g, 100 mmol) in THF (500 ml) was added n-BuLi (60 ml, 2M) dropwise at −78° C. and the reaction mixture was kept stirring for 3 h. Then excess dry ice was added into the reaction mixture portwise over 0.5 h. The reaction mixture was quenched with 300 ml water and extracted with EA (100 ml×3). The aqueous solution was acidified with HCl (2M), extracted with EA (150 ml×3), and the organic layer was dried and concentrated. The crude material was purified by chromatography column (EA:PE=1:10) to afford 18.24 g product (76%). LCMS (ESI) calc'd [M+H]+: 237.00. found: 237.1.
To the solution of 4-bromo-2,5-difluorobenzoic acid (i-6b) (18.24 g, 77.3 mmol) in CH3OH (200 ml) was added concentrated sulfuric acid (5 ml) dropwise. The mixture solution was protected by N2 and stirred at 85° C. for 30 h. The solution was concentrated and purified by chromatography column (EA:PE=1:20) to afford 17.6 g product (91%). LCMS (ESI) calc'd [M+H]+: 251.01. found: 250.9.
To a solution of methyl 4-bromo-2,5-difluorobenzoate (i-6c) (17.6 g, 70.4 mmol) in anhydrous DMF (200 ml) was added CH3ONa (4.56 g, 84.48 mmol). The mixture solution was protected by N2 and stirred at room temperature for 16 h. The reaction was diluted with 500 ml EA and washed with water (100 ml×3). The organic layer was dried, concentrated, and purified by chromatography column (EA:PE=1:20) to afford 14.2 g product (77%). LCMS (ESI) calc'd [M+H]+: 263.06. found: 263.01.
The mixture of methyl 4-bromo-5-fluoro-2-methoxybenzoate (i-6d) (14.2 mg, 54.2 mmol), 4,4,4′,4′,5,5,5′,5′-octamethyl-2,2′-bi(1,3,2-dioxaborolane) (13.8 g, 54.2 mmol), Pd(dppf)2Cl2 (224 mg, 0.2 mmol), dioxane (150 ml) was degassed and protected by N2 and stirred at 80° C. for 4 h. Then the reaction mixture was filtered, concentrated, and purified by chromatography column (EA:PE=1:4) to afford 10.6 g product (63%). LCMS (ESI) calc'd [M+H]+: 310.13. found: 310.2.
To a mixture of methyl 2-amino-4-bromobenzoate (i-7a) (1.15 g, 5 mmol), 4,4,4′,4′,5,5,5′,5′-octamethyl-2,2′-bi(1,3,2-dioxaborolane) (1.27 g, 5 mmol), Pd(dppf)Cl2 (204 mg, 0.25 mmol), dppf (138 mg, 0.25 mmol) and KOAc (1.47 g, 15 mmol) was added dioxane (20 ml), and the mixture was heated at 100° C. under argon for 2 h. The mixture was cooled down, and diluted with CH2Cl2 (50 mL). The organic layer was separated, washed with brine, dried over Na2SO4, and concentrated. The residue was purified by flash chromatography (Pentane/EtOAc 5/1) to give 1.5 g (89%) of the title compound. 1H NMR (500 MHz, CDCL3) 67.84 (1H, d), 7.12 (1H, s), 7.05 (1H, d), 5.68 (2H, bs), 3.86 (3H, s), 1.33 (12H, s).
Methyl 3-amino-4-methylbenzoate (i-8a) (5.0 g, 30.2 mmol) was dissolved in AcOH (140 mL). Sodium nitrite (2.1 g, 30.2 mmol) in water (3.5 mL) was added dropwise to the solution of starting material under ice-cooling at room temperature. The icebath was removed and the mixture was stirred overnight. Half of the solvents were then evaporated, and the mixture was diluted with water (80 mL) and extracted with EtOAc (3×30 mL). The collected organic phase was washed with water and brine (2×200 mL), dried and evaporated to afford i-8b (4.4 g, 83%). LCMS (ESI): calc'd for C9H8N2O2, [M+H]+: 177. found: 177.
Methyl 1H-indazole-6-carboxylate (i-8b) (5.0 g, 28.3 mmol) was dissolved in anhydrous DMAC (50 mL). Iodine (14.4 g, 56.7 mmol) and potassium hydroxide (6.3 g, 113.5 mmol) were added in portions under ice-cooling at room temperature. The ice bath was removed and the mixture was stirred at room temperature for 1 h. The reaction was monitored by TLC (25% MeOH in chloroform) then it was slowly quenched with sat. Na2S2O3 aqueous (100 mL), diluted with water (50 mL) and extracted with EtOAc (3×100 mL). The organic phase was evaporated and triturated with n-hexane. The precipitated material was filtered and dried to afford a brown solid i-8c (5.3 g, 62%). LCMS (ESI): calc'd for C9H7IN2O2, [M+H]+: 303. found: 303.
To a 250 mL round-bottomed flask, was added Methyl 3-iodo-1H-indazole-6-carboxylate (i-8c) (11.7 g, 38.7 mmol), 2-chloro-6-(trifluoromethyl)benzoyl chloride (9.1 g, 38.7 mmol), DMAP (4.72 g, 38.7 mmol) and CH2Cl2 (30 mL). After stirring at room temperature for 3 minutes, TEA (11.2 mL, 77 mmol) was added slowly. The reaction mixture was stirred at room temperature overnight. LCMS showed that no starting materials remained. Then the mixture was poured into 30 mL water, and the lower (organic) and upper (aqueous) phases were separated. The aqueous phase was extracted twice with 20 mL CH2Cl2. The combined organic phases were washed successively with two 20 mL portions of water and 10 mL of brine. The resulting organic phase was dried over anhydrous sodium sulfate, filtered and concentrated at reduced pressure to give a yellow solid. The residue was purified by column chromatography on 60 g of silica gel eluting with petroleum ether/EtOAc from 50/1 to 10/1, to give a fawn solid i-8d (16.5 g, 84%). LCMS (ESI): calc'd for C17H9ClF3IN2O3, [M+H]+: 509. found: 509.
A mixture of methyl 1-(2-chloro-6-(trifluoromethyl)benzoyl)-3-iodo-1H-indazole-6-carboxylate (i-8d) (16.5 g, 32.5 mmol) and LiOH (3.40 g, 162.40 mmol) in 10 ml THF and 50 ml H2O was stirred at room temperature overnight. The solvent was evaporated and the residue was dissolved in water. 5% HCl aqueous was added until pH was ˜4-5. The precipitated solid was filtered, washed with water and n-hexane, and dried to afford an off-white solid i-8 (16.0 g, 83%). LCMS (ESI): calc'd for C16H7ClF3IN2O3, [M+H]+: 495. found: 495.
To a flask was added 6-bromo-1H-indazole (i-9a) (1.96 g, 10 mmol), KOH (1.68 g, 30 mmol) and DMF (60 mL), followed by the addition of I2 (5.08 g, 20 mmol) in portions. The reaction mixture was stirred at room temperature for 1 h. The mixture was diluted with H2O, and the organic layer was separated. The aqueous layer was extracted with CH2Cl2 (3*50 mL). The combined organics were washed with H2O, brine, dried over Na2SO4, and concentrated. The residue was purified by column chromatography (PE/EA=10/1) to afford 2.84 g (88%) of the title compound. LCMS (ESI) calc'd for C7H4BrIN2 [M+H]+: 322.86. found: 323.
To a flask was added 6-bromo-3-iodo-1H-indazole (i-9b) (3.22 g, 10 mmol), DMAP (1.22 g, 10 mmol), TEA (2.77 mL, 20 mmol) and DCM (50 mL), followed by the addition of 2-chloro-6-(trifluoromethyl)benzoyl chloride (2.61 g, 10 mmol) slowly. The reaction mixture was stirred at room temperature for 5 h. The mixture was diluted with H2O, and the organic layer was separated. The aqueous layer was extracted with CH2Cl2 (3×50 mL), The combined organics were washed with H2O, brine, dried over Na2SO4, and concentrated. The residue was purified by column chromatography (PE/EA=10/1) to afford 4.9 g (82%) of the title compound. LCMS (ESI) calc'd for C15H6BrClF3IN2O [M+H]+: 528.83. found: 529.
To a mixture of (6-bromo-3-iodo-1H-indazol-1-yl)(2-chloro-6-(trifluoromethyl)phenyl)methanone (i-9c) (1.058 g, 2 mmol), 4-(methoxycarbonyl)phenylboronic acid (360 mg, 2 mmol), PdCl2(dppf)2 (82 mg, 0.1 mmol) and KF (290 mg, 5 mmol) was added dioxane (25 ml) and H2O (0.5 ml), and the mixture was heated at 90° C. under argon for 6 h. The mixture was cooled down, and diluted with CH2Cl2 (180 ml). The organic layer was separated, washed with brine, dried over Na2SO4, and concentrated. The residue was purified by SiO2 (PE/EA from 10/1 to 20/1) to give 850 mg (81%) of the title compound. LCMS (ESI) calc'd for C23H13BrClF3N2O3 [M+H]+: 536.98. found: 537.
Synthesized according to the method shown in Scheme i-9
A solution of 2,3-dihydrobenzo[b][1,4]dioxine-5-carbonylic acid (1 g, 5.56 mmol) in 4 ml of acetic acid and 4 ml of acetic anhydride was heated to 40° C., and a solution 0.6 ml nitric acid in 0.6 ml acetic acid was added. The mixture was stirred at 40-45° C. for 2 h and then cooled to 5° C. The precipitate was filtered with suction filter, washed with 10 ml water, collected and dried to afford 700 mg of the title compound as white solid, which was used in the next step without further purification. LCMS (ESI) calc'd for C9H7NO6, [M+H]+: 226. found: 226.
To a solution of 6-nitro-2,3-dihydrobenzo[b][1,4]dioxine-5-carbonylic acid (i-11a) (700 mg, 3.11 mmol) in MeOH (30 ml) was added Pd/C (33 mg, 0.311 mmol), and the mixture was placed under an atmosphere of H2 (g). Then the reaction mixture was stirred at room temperature for 4 h. The mixture was filtered over celite and concentrated to give the title compound as a brown oil (500 mg), which was used in the next step without further purification. LCMS (ESI) calc'd for C9H9NO4, [M+H]+: 196. found: 196.
A solution of 6-amino-2,3-dihydrobenzo[b][1,4]dioxine-5-carbonylic acid (i-11b) (500 mg, 2.56 mmol) in HCl (5 ml, 6M) was cooled to 0° C. and treated slowly with a solution of NaNO2 (177 mg, 2.56 mmol) in 5 ml water. The mixture was stirred for 1 h. In the meantime, a mixture of CuCl (506.9 mg, 5.12 mmol) and 4 ml of HCl was heated to 80° C. Then, the solution of the first step was added slowly into the heated solution, followed by refluxing for 5 h. After filtration, the filtrate was extracted with EA (4*10 ml), and then the solvent was removed to give a crude product of the title compound (400 mg, brown solid), which was used in the next step without further purification. LCMS (ESI) calc'd for C9H7ClO4, [M+H]+: 215. found: 215.
To a vial were added methyl 2-bromo-6-chlorobenzoate (430 mg, 1.724 mmol), morpholine (180 μl, 2.068 mmol), Pd2(dba)3 (158 mg, 0.172 mmol), Xantphos (150 mg, 0.259 mmol), cesium carbonate (1123 mg, 3.45 mmol) and dioxane (5.7 mL), and the reaction was heated to 80° C. overnight. The mixture was cooled, diluted with ethyl acetate, washed twice with aqueous sodium hydrogen carbonate, and washed once with brine. Aqueous layers were back extracted once with ethyl acetate, combined organic layers were dried with Na2SO4 and filtered, and the solvent was evaporated under reduced pressure. The residue was purified by flash chromatography (EtOAc/Hexane 10-75%) to give the title compound as yellow oil. (156 mg, 35%) LCMS (ESI) calc'd for C12H14ClNO3 [M+H]+: 256. found: 256.
To a vial were added methyl 2-chloro-6-morpholinobenzoate (i-12a) (150 mg, 0.587 mmol), potassium hydroxide (2933 μl, 5.87 mmol), THF (1.5 ml) and water (1.5 ml), and the reaction was heated to 100° C. over the weekend. The reaction was acidified with 2N HCl and then extracted twice with 3:1 CHCl3:IPA. The combined organic layers were dried with sodium sulfate, filtered and concentrated to give the title compound. (140 mg, 99%) LCMS (ESI) calc'd for C11H12ClNO3 [M+H]+: 242. found: 242.
Pd/C (150 mg) was added to a solution of 2-methyl-6-nitrobenzoic acid (1.5 g, 8.29 mmol) in CH3OH (35 ml). The mixture was stirred at room temperature under H2 atmosphere for 2 h. Then the mixture was filtered and concentrated to afford 1.2 g of the title compound as yellow solid. LCMS (ESI): calc'd for C8H9NO2[M+H]+: 152. found: 152.
2-amino-6-methylbenzoic acid (i-13a) (1.2 g, 8.0 mmol) was dissolved in CH3COOH (50 ml) and heated to 40° C. To this stirring solution was added (HCHO)n (0.72 g, 24 mmol), followed by NaBH3CN (1.51 g, 24 mmol). The reaction mixture was stirred for 1 h at 40° C., then additional (HCHO)n (0.72 g, 24 mmol) and NaBH3CN (1.51 g, 24 mmol) were added. The mixture was stirred for 16 h at 40° C. The solvent was removed under reduced pressure. The residues were partitioned between EA and water. The organic layer was dried over Na2SO4, filtered and concentrated to obtain a residue. The residue was purified by chromatography on silica gel (PE/EA=3/1) to afford 700 mg (50%) of the title compound. LCMS (ESI) calc'd for C10H13NO2 [M+H]+: 180. found: 180.
To a stirred solution of methyl 2-bromo-6-chlorobenzoate (500 mg, 2.0 mmol) and 1-cyclopentenylboronic acid pinacol ester (429 mg, 2.2 mmol) in dioxane (20 mL) was added Pd(dppf)Cl2 (50 mg, 0.021 mmol), Na2CO3 (430 mg, 4.0 mmol) and dioxane/H2O (10 mL/2 mL) at room temperature. The mixture was stirred at 110° C. under N2 for 8 h. The mixture was washed with H2O (30 mL*3) and then dried over anhydrous sodium sulfate. After filtration and concentration, the residue was purified by prep-TLC (PE:EtOAc=10:1) to give the title compound (300 mg, yield: 56%) as a white solid. LCMS (ESI): calc'd for C13H13ClO2 [M+H]+: 237. found: 237.
A solution of methyl 2-chloro-6-cyclopentylbenzoate (i-14a) (300 mg, 1.02 mmol) and Pd/C (30 mg, 1.53 mol) in EtOAc (10 mL) was stirred at 15° C. under 15 psi H2 (g) for 2 h. The reaction mixture was filtered, and the filtrate was concentrated in vacuo to obtain the title compound (200 mg, 75%) as yellow oil. LCMS (ESI): calc'd for C13H15ClO2 [M+H]+: 239 found: 239.
A solution of methyl 2-chloro-6-cyclopentylbenzoate (i-14b) (200 mg, 0.61 mmol) in EtOH (10 mL) and aq. NaOH (10 mL, 30%) was refluxed over 3 days. Then the mixture was acidified by aq.HCl (1M) to pH=3˜4 and extracted with ethyl acetate. The combined extracts were washed with brine, dried over anhydrous Na2SO4 and concentrated to give the title compound (100 mg, yield: 39%) as a white solid. LCMS (ESI): calc'd for C12H13ClO2 [M+H]+: 225. found: 225.
A mixture of 2-chloro-6-cyclopentylbenzoic acid (i-14c) (80 mg, 0.36 mmol) and 5 mL of SOCl2 was heated to reflux for 24 h under N2. After the reaction finished, the mixture was cooled to 15° C. and evaporated to afford the title compound (100 mg, 100%) as yellow oil. LCMS (ESI): calc'd for C12H12Cl2O [M+H]+: 243. found: 243.
To a solution of methyl 2-bromo-6-chlorobenzoate (520 mg, 2.00 mmol) and 1-cyclohexenylboronic acid pinacol ester (500 mg, 2.40 mmol) in 10 mL of dioxane and 2 mL of water under nitrogen was added sodium carbonate (500 mg, 4.60 mmol) and Pd(dppf)Cl2 (10 mg), and the resulting mixture was stirred at 90° C. for 3 hrs. The mixture was concentrated and the residue was purified on silica gel by column chromatography (petroleum as eluent) to give the title compound (520 mg, 100%) as colorless oil. LCMS (ESI) calc'd for C14H15ClO2 [M+H]+: 251. found: 251.
A mixture of methyl 3-chloro-2′,3′,4′,5′-tetrahydro-[1,1′-biphenyl]-2-carboxylate (i-15a) (520 mg, 2 mmol) and Pd/C (100 mg, 10% wet) in 10 mL of ethyl acetate was stirred at room temperature under H2 (1 atm) for 4 hours. The reaction mixture was filtered. The filtrate was concentrated to afford the title compound in crude form (500 mg, 70% purity, along with 30% of de-chloro by-product), which was used without further purification. LCMS (ESI) calc'd for C14H17ClO2 [M+H]+: 253. found: 253.
To a solution of methyl 2-chloro-6-cyclohexylbenzoate (i-15b) (500 mg, 1.04 mmol) in 10 mL of MeOH/H2O (1:1) was added sodium hydroxide (175 mg, 4.16 mmol), and the reaction mixture was then stirred for 48 h at 80° C. The mixture was diluted with 10 mL of water and extracted with PE (200 mL*2). The aqueous layer was acidified by 2 M HCl to pH=3 and then extracted with EtOAc (300 mL*3). The combined organic layers were washed with brine (200 mL*2), dried over Na2SO4 and concentrated to afford the title compound (300 mg, 64%) as a yellow solid. LCMS (ESI) calc'd for C13H15ClO2 [M+H]+: 239. found: 239.
A mixture of 2-chloro-6-cyclohexylbenzoic acid (i-15c) (150 mg, 0.63 mmol) and 5 mL of SOCl2 was heated to reflux for 24 h under N2. The mixture was cooled to 15° C. and evaporated to afford the title compound (150 mg, 93%) as yellow oil. LCMS (ESI) calc'd for C13H14Cl2O [M+H]+: 257. found: 257.
A mixture of methyl 2-bromo-6-chlorobenzoate (750 mg g, 3 mmol), (PPh3)4Pd (345 mg, 0.3 mmol) and cyclobutylzinc bromide (12 ml in THF, 6 mmol) was stirred at 70° C. for 12 h under N2. The mixture was extracted with EA and water. The organic phase was washed with brine, dried over Na2SO4, filtered, and concentrated. Purification by flash chromatography (PE: EtOAc=50:1) afforded 350 mg (61% in LCMS, contained some PPh3) of the title compound. LCMS (ESI) calc'd for C12H13ClO2 [M+H]+: 225. found: 225.
To a solution of methyl 2-chloro-6-cyclobutylbenzoate (i-16a) (350 mg, 1 mmol) in EtOH (2 ml), was added KOH (2M in H2O, 1.5 ml, 3 mmol). The mixture was stirred at 100° C. for 12 h, acidified with 3N HCl and extracted with EA. The organic phase was washed with brine, dried over Na2SO4, filtered and concentrated. Purification by prep-HPLC (ACN: H2O) afforded 125 mg of the title compound. LCMS (ESI) calc'd for C11H11ClO2 [M+H]+: 211. found: 211.
To a solution of 3-bromo-1H-indazole (500 mg, 2.55 mmol) in DCM (15 mL) was added 2-chloro-6-(trifluoromethyl)benzoyl chloride (678 mg, 2.8 mmol). Then Et3N (386 mg, 3.825 mmol) and DMAP (93 mg, 0.765 mmol) were added. The mixture was stirred at room temperature for 4 h. Water was added, and the aqueous phase was extracted with DCM. The organic phase was collected, washed with brine, dried over anhydrous Na2SO4, and concentrated to obtain the title compound as a crude solid (812 mg). LCMS (ESI): calc'd for C15H7BrClF3N2O [M+H]+: 403. found: 403.
To a solution of 3-iodo-1H-indazole (500 mg, 2.05 mmol) in DCM (20 mL), was added 2-chloro-6-(trifluoromethyl)benzoyl chloride (547 mg, 2.25 mmol). Then Et3N (311 mg, 3.1 mmol) and DMAP (75 mg, 0.615 mmol) were added. The mixture was stirred at room temperature overnight. Water was added, and the aqueous phase was extracted with DCM. The organic phase was collected, washed with brine, dried over anhydrous Na2SO4 and concentrated to obtain the title compound as a solid product (750 mg). LCMS (ESI): calc'd for C15H7IClF3N2O [M+H]+: 451. found: 451.
Methyl 2-bromo-6-chlorobenzoate (1.0 g, 4.0 mmol), cyclopropylboronic acid (516 mg, 6.0 mmol), Pd(OAc)2 (90 mg, 0.4 mmol), Cy3P (224 mg, 0.8 mmol) and K3PO4 (2.5 g, 12.0 mmol) were stirred overnight in toluene (20 ml) and H2O (2.5 ml) under an atmosphere of N2 (g). The mixture was cooled to room temperature and poured into water (50 ml). The mixture was then extracted with EA (50 ml). The organic layer was dried over Na2SO4 and concentrated. The residue was purified by flash chromatography (Petroleum/EtOAc 15/1) to give 0.6 g (71%) of the title compound. LCMS (ESI) calc'd for C11H11ClO2 [M+H]+: 211. found: 211.
NaOH (380 mg, 9.5 mmol) was added to a solution of methyl 2-chloro-6-cyclopropylbenzoate (i-19a) (200 mg, 0.95 mmol) in EtOH (15 ml) and H2O (6 ml). The resulting solution was stirred at 80° C. for 14 h. The mixture was cooled down and acidified with 2N HCl to pH=2-3. Then the mixture was extracted with EA (50 ml). The organic layer was dried over Na2SO4 and concentrated to afford 160 mg (86%) of the title compound. LCMS (ESI) calc'd for C10H9ClO2 [M+H]+: 197. found: 197.
To a solution of 2-chloro-6-cyclopropylbenzoic acid (i-19b) (160 mg, 0.816 mmol) in DCM (20 mL) was added two drops of DMF. Oxalyl dichloride (207 mg, 1.63 mmol) was added, and the solution was stirred at room temperature for 30 min. The reaction mixture was evaporated to dryness. The residue was dissolved in DCM (15 mL) and next added to a mixture of 3-iodo-1H-pyrazolo[4,3-b]pyridine (200 mg, 0.816 mmol), DMAP (100 mg, 0.816 mmol) and TEA (123 mg, 1.22 mmol) in DCM (30 ml). The reaction mixture was stirred at 40° C. for 3 h. The mixture was diluted with H2O, and the organic layer was separated. The aqueous layer was extracted with CH2Cl2. The combined organic extracts were dried over Na2SO4 and concentrated. The residue was purified by flash chromatography (Petroleum/EtOAc, 6/1) to afford 208 mg (60%) of the title compound. LCMS (ESI) calc'd for C16H11C1IN3O [M+H]+: 424. found: 424.
A mixture of 2-chloro-6-cyclopropylbenzoic acid (0.23 g, 1.17 mol) and (COCl)2 (0.2 mL, 2.34 mol) in DCM (10 mL) and DMF (5 drops) was stirred at room temperature for 1.5 h. The solvent was removed and the residue was dissolved in DCM (10 mL)
o a mixture of 3-bromo-1H-indazole (0.23 g, 1.17 mol), DMAP (74 mg, 0.59 mol) and Et3N (0.32 mL, 2.34 mol) in DCM (10 mL) was added the above DCM solution dropwise, and the reaction mixture was stirred at room temperature overnight. The resulting solution was diluted with H2O (50 mL), and the aqueous layer was extracted with DCM (30 mL×3). The combined organic layers were washed with brine (30 mL), dried over anhydrous Na2SO4 and concentrated. The residue was chromatographed on silica gel (PE:EA 10:1) to obtain the title compound as a white solid. LCMS (ESI) calc'd for C17H12BrClN2O [M+H]+: 375. found: 375.
A mixture of 2-chloro-6-cyclopropylbenzoic acid (0.23 g, 1.17 mol) and (COCl)2 (0.2 mL, 2.34 mol) in DCM (10 mL) and DMF (5 drops) was stirred at room temperature for 1.5 h. The solvent was removed and the residue was dissolved in DCM (10 mL)
o a mixture of 3-bromo-4-fluoro-1H-indazole (0.25 g, 1.17 mol), DMAP (74 mg, 0.59 mol) and Et3N (0.32 mL, 2.34 mol) in DCM (10 mL) was added the above DCM solution dropwise, and the reaction mixture was stirred at room temperature overnight. The resulting solution was diluted with H2O (50 mL), and the aqueous layer was extracted with DCM (30 mL×3). The combined organic layers were washed with brine (30 mL), dried over anhydrous Na2SO4 and concentrated. The residue was chromatographed on silica gel (PE:EA 10:1) to obtain the title compound as a white solid. LCMS (ESI) calc'd for C17H11BrClFN2O [M+H]+: 393. found: 393.
To a solution of 2-chloro-6-cyclobutylbenzoic acid (300 mg, 1.43 mmol) and oxalyl dichloride (301 mg, 2.37 mmol) in DCM (5 mL) was added one drop of DMF, and the mixture was stirred at 10° C. for 3 hours. The reaction mixture was concentrated in vacuo to give the crude title compound (350 mg crude) as a yellowish solid, which was used in the next step without further purification.
To a stirred solution of 3-iodo-1H-pyrazolo[4,3-b]pyridine (300 mg, 1.224 mmol) in THF (3 mL) at 0° C. was added NaH (59 mg, 2.45 mmol, 60% in mineral oil), and the mixture was stirred at this temperature for 30 min. A solution of 2-chloro-6-cyclobutylbenzoyl chloride (i-22a) (350 mg crude) in THF (1 mL) was added, and the resulting mixture was stirred at 10° C. for an additional 2 hours, after which time LCMS showed that the reaction was completed. The reaction mixture was poured into water (20 mL) and extracted with DCM (20 mL*2). The combined organic layers were washed with brine (30 mL), dried over Na2SO4 and concentrated in vacuo. The crude product was purified by prep-TLC (PE: EtOAc=3:1) to give the title compound (380 mg, 70.9% yield) as a white solid. LCMS (ESI) calc'd for C17H13C1IN3O [M+H]+: 438. found: 438.
To a solution of 2-chloro-6-cyclopropylbenzoic acid (1 g, 7.19 mmol) in 50 mL of DCM at 0° C. was added oxalyl dichloride (13 mL) dropwise, and then the mixture was stirred at 25° C. for 12 h. The mixture was evaporated to dryness. The residue was next concentrated under reduced pressure to afford 12 g (86%) of the title compound as a yellow oil. LCMS (ESI) calc'd for C10H8Cl2O [M+H]+: 215. found: 215.
To a suspension of 4-fluoro-3-iodo-1H-indazole (1.14 g, 4.65 mmol) in 20 mL of THF at 0° C. was added NaH (279 mg, 6.9 mmol) dropwise. The mixture was stirred at 0° C. for 30 mins, and a solution of 2-chloro-6-cyclopropylbenzoyl chloride (i-23a) (1 g, 4.65 mol) in anhydrous THF (20 mL) was then added dropwise to the mixture. The mixture was stirred at 25° C. for another 30 mins. Then the reaction mixture was quenched by sat. NH4Cl solution, diluted with water (100 mL) and extracted with EtOAc (150 mL*3). The combined organic layers were washed with brine (50 mL*2), dried over Na2SO4 and evaporated to dryness. The residue was purified by column chromatography on silica gel (PE: EtOAc=5:1) to give 1.7 g (86.3%) of the title compound as a yellow solid. LCMS (ESI) calc'd for C17H11ClFIN2O [M+H]+: 441. found: 441.
To a solution of 4-chloro-1H-indazole (3.0 g, 20 mmol) in dry DMF (20 mL) was added KOH (4.5 g, 80 mmol). After stirring at 25° C. for 30 minutes, I2 (10.0 g, 40 mmol) was added at 0° C. The mixture was stirred at 25° C. for an additional 12 hours. The resulting mixture was poured into saturated aq.Na2S2O3 solution (200 mL). The solid was collected by filtration and dried to afford the title compound (6.0 g, crude) as a gray solid. LCMS (ESI) calc'd for C7H4C1IN2 [M+H]+: 279. found: 279.
To a suspension of NaH (48 mg, 2 mmol, 60% in mineral oil) in dry THF (20 mL) at 0° C. was added 4-chloro-3-iodo-1H-indazole (i-24a) (280 mg, 1 mmol). After stirring this at 0° C. for 1 h, 2-chloro-6-cyclopropylbenzoyl chloride (260 mg, 1.2 mmol) was added dropwise. The mixture was stirred at 25° C. for an additional 2 h. After the reaction was completed, the mixture was quenched with water (10 mL) and concentrated in vacuo. The residue was partitioned between ethyl acetate (100 mL) and water (100 mL). The aqueous layer was extracted with ethyl acetate (50 mL*3). The combined organic layers were dried over anhydrous Na2SO4, and concentrated under reduced pressure to give the crude title compound (500 mg, crude) as a brown solid. LCMS (ESI) calc'd for C17H11Cl2IN2O [M+H]+: 457. found: 457.
A mixture of 4-bromo-2-methylbenzoic acid (4.3 g, 20 mmol), Pd(OAc)2 (223 mg, 1 mmol) and NCS (2.7 g, 20 mmol) in anhydrous DMF (17 mL) was stirred at 100° C. for 12 h under argon. The mixture was extracted with EtOAc and water. The organic phase was washed with brine, dried over Na2SO4, filtered, and concentrated. The residue was purified by flash chromatography (PE: EA=1:1) to give 2.3 g (yield: 46%) of the title compound. LCMS (ESI) calc'd for C8H6BrClO2 [M+H]+: 249. found: 249.
To a solution of 4-bromo-2-chloro-6-methylbenzoic acid (i-25a) (250 mg, 1 mmol) in DCM (10 ml), (COCl)2 (630 mg, 5 mmol) was added, as well as a drop of DMF. The solution was stirred at room temperature for 1 h and concentrated to afford the title compound, which was used without further purification.
To a solution of 3-iodo-1H-pyrazolo[4,3-b]pyridine (10 g, 40.1 mmol) in 150 mL of THF was added DHP (10.3 g, 122.4 mmol) and p-TSA (776 mg, 4 mmol). The reaction mixture was heated to reflux for 6 h. The mixture was poured into water and extracted with EtOAc (300 mL*3). The combined organic layers were washed with brine, dried over Na2SO4 and concentrated. The residue was purified by silica gel chromatography, eluting with PE:EA=50:1 to PE:EA=5:1 to afford the title compound (7 g, 54%) as a yellow solid. LCMS (ESI): calc'd for C11H12IN3O [M+H]+: 330. found: 330.
To a solution of 3-iodo-1-(tetrahydro-2H-pyran-2-yl)-1H-pyrazolo[4,3-b]pyridine (i-26a) (3.5 g, 10.6 mmol) and (2-fluoro-4-(methoxycarbonyl)phenyl)boronic acid (3.2 g, 15.9 mmol) in 70 mL of toluene/EtOH(1:1) was added 7.35 mL of sat. Na2CO3 solution and Pd(dppf)Cl2 CH2Cl2 (867 mg, 1.06 mmol). The reaction mixture was heated to 120° C. for 6 h under an atmosphere of N2 (g). The mixture was filtered and concentrated in vacuo. The crude title compound was used directly for the next reaction without further purification. LCMS (ESI): calc'd for C19H15FN3O3 [M+H]+: 356. found: 356.
Crude methyl 3-fluoro-4-(1-(tetrahydro-2H-pyran-2-yl)-1H-pyrazolo[4,3-b]pyridin-3-yl)benzoate (i-26b) (5 g, 12.9 mmol) was added to 100 mL of 4N HCl/MeOH, and the reaction mixture was heated to reflux for 14 h. The mixture was basified with sat. NaOH solution to pH=7. The white solid precipitates were collected, washed with PE (100 mL) and dried in vacuum to afford the title compound (2 g, 68%) as a light yellow solid. LCMS (ESI): calc'd for C14H10FN3O2 [M+H]+: 272. found: 272.
To a solution of 2,6-difluoroaniline (1 g, 7.75 mmol) in 20 mL of dry DCM was added NBS (1.96 g, 9.29 mmol). The mixture was stirred at room temperature for 3 hours. The mixture was filtered and concentrated under reduced pressure. The residue was purified by column chromatography on silica gel (PE/EA=50/1 to 20/1) to afford the title compound (1.61 g, 80.7% yield) as a yellow solid. LCMS (ESI) calc'd for C6H4BrF2N [M+H]+: 208. found: 208.
To a solution of 4-bromo-2,6-difluoroaniline (i-27a) (10 g, 48.1 mmol) in EtOH (100 mL) was added Et3N (14.6 g, 144 mmol) and Pd(dppf)Cl2 (1 g). The mixture was stirred at 80° C. for 24 hours under CO (2 MPa) atmosphere, after which LCMS showed 15% conversion. The resulting mixture was filtered and concentrated. The residue was purified by column chromatography on silica gel (PE/EA=50:1 to 40:1) to afford the title compound (1 g, 10% yield). LCMS (ESI) calc'd for C9H9F2NO2 [M+H]+: 202. found: 202.
To a solution of ethyl 4-amino-3,5-difluorobenzoate (i-27b) (1 g, 4.98 mmol), t-BuONO (3769 mg, 7.46 mmol) in 20 mL CH3CN at room temperature was added CuBr2 (1.66 g, 7.46 mmol). The mixture was stirred at room temperature for 1 hour, diluted with water (40 mL), and extracted with EtOAc (40 mL*2). The combined organic layers were washed with brine, dried over Na2SO4, filtered and concentrated. The residue was purified by column chromatography on silica gel (PE/EA=100/1 to 20/1) to afford the title compound (0.9 g, 68% yield). LCMS (ESI) calc'd for C9H7BrF2O2 [M+H]+: 265. found: 265.
To a solution of ethyl 4-bromo-3,5-difluorobenzoate (i-27c) (600 mg, 2.26 mmol), 4,4,4′,4′,5,5,5′,5′-octamethyl-2,2′-bi(1,3,2-dioxaborolane) (1.73 g, 6.79 mmol) and KOAc (666 mg, 6.79 mmol) in toluene (20 mL) was added Pd(dppf)Cl2 (60 mg). The mixture was stirred at 110° C. for 4 hours under an atmosphere of N2 (g). After cooling to room temperature, the mixture was diluted with water (60 mL) and extracted with EtOAc (60 mL*3). The combined organic layers were washed with brine, dried over anhydrous Na2SO4, and filtered and concentrated under reduced pressure. The residue was purified by column chromatography on silica gel (PE/EA=100:1 to 8:1) to afford the title compound (340 mg, 48% yield) as a white solid. LCMS (ESI) calc'd for C15H19BF2O4 [M+H]+: 313. found: 313.
A mixture of 3-bromo-1H-pyrazolo[4,3-b]pyridine (A−1) (196.9 mg, 1 mol), 4-(methoxycarbonyl)phenylboronic acid (198 mg, 1 mol), Pd(PPh3)4 (115 mg, 0.1 mol) and K2CO3 (420 mg, 3 mol) was suspended in 1,4-dioxane (5 ml) and H2O (1 ml). The reaction mixture was heated at 110° C. in a microwave reactor for 2 h. The resulting mixture was diluted with H2O (30 ml) and the aqueous layer was extracted with ethyl acetate (30 ml×2). The combined organic layers were washed with brine (30 ml×1), dried over anhydrous Na2SO4 and concentrated to obtain the crude product A-2 as a brown oil. LCMS (ESI) calc'd for C14H10FN3O2 [M+H]+: 272.08. found: 272.
(COCl)2 (907 mg, 7.14 mmol) was added dropwise to a solution of (E)-2-chloro-6-(prop-1-enyl)benzoic acid (i-1) (700 mg, 3.57 mmol) and 3 drops of DMF in DCM (20 ml). The resulting solution was stirred at room temperature for 30 min. Then the solution was added to a solution of methyl 3-fluoro-4-(1H-pyrazolo[4,3-b]pyridin-3-yl)benzoate (A-2) (968 mg, 3.57 mmol), Et3N (720 mg, 7.14 mmol) and DMAP (436 mg, 3.57 mmol) in DCM (20 ml). The solution was stirred at room temperature for 3 h. Then the reaction mixture was poured into water and separated. The organic layer was dried over Na2SO4 and concentrated to obtain a crude product. The crude product was purified by chromatography on silica gel (PE/EA=6:1) to afford 133 mg of the title compound. LCMS (ESI) calc'd for C24H17ClFN3O3 [M+H]+: 450. found: 450.
To a solution of (E)-methyl 4-(1-(2-chloro-6-(prop-1-enyl)benzoyl)-1H-pyrazolo[4,3-b]pyridin-3-yl)-3-fluorobenzoate (A-3) (120 mg, 2.67 mmol) in THF (15 mL) and H2O (15 mL) was added LiOH.H2O (112 mg, 2.67 mmol), and the mixture was stirred at 30° C. for 2 h. The mixture was neutralized with 2N HCl to pH=3-4. The mixture was extracted with EA (50 ml). The organic layer was dried over Na2SO4 and concentrated to obtain a crude product. The crude product was purified by prep-HPLC to afford 17 mg (15%) of the title compound as a white solid. LCMS (ESI): calc'd for C23H15ClFN3O3[M+H]+: 436. found: 436; 1HNMR (400 MHz, DMSO) δ 8.94 (2H, m), 8.26-8.23 (1H, t), 7.91-7.72 (4H, m), 7.57-7.48 (2H, m), 6.45-6.43 (1H, m), 6.34-6.30 (1H, d), 1.75-1.74 (3H, d).
The mixture of 2-chloro-6-(trifluoromethyl)benzoic acid (B-2) (0.46 g, 2.07 mol) and (COCl)2 (0.32 mL, 3.76 mol) in DCM (10 mL) and DMF (5drops) was stirred at room temperature for 1 h. The solvent was removed and the residue was dissolved in DCM (10 mL). To the mixture of 3-iodo-1H-indazole-4-carbaldehyde (B−1) (0.51 g, 1.88 mol), DMAP (23 mg, 0.19 mol) and Et3N (0.52 mL, 3.76 mol) in DCM (10 mL) was added the above DCM solution dropwise and the reaction mixture was stirred at room temperature overnight. The resulting solution was diluted with H2O (50 mL) and the aqueous layer was extracted with DCM (30 mL×3). The combined organic layers were washed with brine (30 mL×1), dried over anhydrous Na2SO4 and concentrated. The residue was chromatographed on silica gel (PE:EA 8:1 to 4:1) to obtain the desired product B-3 as a white solid. LCMS (ESI) calc'd for C16H7ClF3IN2O2 [M+H]+: 479. found: 479.
A mixture of 1-(2-chloro-6-(trifluoromethyl)benzoyl)-3-iodo-1H-indazole-4-carbaldehyde (B-3) (0.5 g, 1.05 mol), 4-(methoxycarbonyl)phenylboronic acid (B-4) (0.28 g, 1.57 mol), Pd(PPh3)4 (0.13 g, 0.11 mol) and K2CO3 (0.43 g, 3.15 mol) were suspended in 1,4-dioxane (10 mL) and H2O (2 mL). The reaction mixture was heated at 100° C. in a microwave reactor for 1.5 h. The resulting mixture was diluted with H2O (50 mL) and the aqueous layer was extracted with ethyl acetate (50 mL×3). The combined organic layers were washed with brine (50 mL), dried over anhydrous Na2SO4 and concentrated. The residue was chromatographed on silica gel (PE:EA=4:1) to obtain the desired product B-5 as a pale yellow solid. LCMS (ESI) calc'd for C24H14ClF3N2O4 [M+H]+: 487. found: 487.
The mixture of methyl 4-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-4-formyl-1H-indazol-3-yl)benzoate (B-5) (40 mg, 0.08 mol) and LiOH (17 mg, 0.41 mol) in THF (4 mL) and H2O (2 mL) was stirred at room temperature for 4 h. The reaction mixture was diluted with H2O (20 mL). 2M HCl solution was added to adjust the pH to 3, and the aqueous layer was extracted with ethyl acetate (20 mL×3). The combined organic layers were washed with brine (20 mL×1), dried over anhydrous Na2SO4 and concentrated. The residue was purified with Prep-HPLC to obtain the desired product 1B as a white solid. LCMS (ESI): calc'd for C23H12ClF3N2O4 [M+H]+: 473. found: 473; 1HNMR (400 MHz, DMSO) δ 10.07 (1H, s), 8.89 (1H, d, J=8.4 Hz), 8.13 (1H, d, J=7.2 Hz), 8.03-8.07 (4H, m), 7.99 (1H, d, J=8.0 Hz), 7.83-7.87 (1H, m), 7.70 (2H, d, J=8.4 Hz).
To a solution of 2-chloro-6-cyclopropylbenzoic acid (160 mg, 0.82 mmol) in DCM (2 mL) was added two drops of DMF. Then oxalyl dichloride (207 mg, 1.63 mmol) was added, and the solution was stirred at room temperature for 30 min. The reaction mixture was concentrated and the residue was taken up in DCM (2 mL), and added to a mixture of methyl 3-fluoro-4-(1H-pyrazolo[4,3-b]pyridin-3-yl)benzoate (221 mg, 0.816 mmol), DMAP (100 mg, 0.816 mmol) and TEA (123 mg, 1.22 mmol) in DCM (5 mL). The reaction mixture was stirred at 40° C. for 3 h. The mixture was diluted with H2O, and the organic layer was separated. The aqueous layer was extracted with CH2Cl2. The combined organics were dried over Na2SO4 and concentrated. The residue was purified by flash chromatography (Petroleum/EtOAc, 6/1) to afford the title compound. LCMS (ESI) calc'd for C24H17ClFN3O3 [M+H]+: 450. found: 450.
To a solution of C-1 (110 mg, 0.245 mmol) in THF (2 mL) and H2O (2 mL) was added LiOH (103 mg, 2.5 mmol), and the mixture was stirred at 30° C. for 2 h. The mixture was neutralized with 2N HCl to PH=3˜4. The mixture was extracted with EtOAc. The organic layer was dried over Na2SO4 and concentrated. The residue was purified by prep-HPLC (CH3CN/H2O) to afford the title compound as a white solid. LCMS (ESI): calc'd for C23H15ClFN3O3 [M+H]+: 436. found: 436; 1HNMR (400 MHz, DMSO) δ 13.51 (1H, s), 8.96-8.94 (2H, m), 8.36-8.32 (1H, t), 7.98-7.96 (1H, d), 7.88-7.82 (2H, m), 7.52-7.43 (2H, m), 7.14-7.13 (1H, d), 1.82-1.78 (1H, m), 0.87-0.83 (1H, m), 0.79-0.70 (2H, m), 0.67-0.62 (1H, m).
To a vial was added methyl 3-fluoro-4-(1H-indazol-3-yl)benzoate (D-1) (30 mg, 0.11 mmol), LiOH (1M, 0.33 ml), methanol (0.25 ml) and THF (0.5 ml), The reaction mixture was stirred at room temperature for 2 hours. The mixture was then evaporated under reduced pressure. The remaining residue was dissolved in DCM (0.5 ml) and was added to a mixture of picolinic acid (27 mg, 0.22 mmol), 2-chloro-1,3-dimethylimidazolinium chloride (37.5 mg, 0.22 mmol), and DCM (1 ml). The resulting mixture was stirred at room temperature for 4 h. The combined mixture was stirred overnight at room temperature and then evaporated under reduced pressure. The residue was diluted with 1.0 mL DMSO, filtered, and purified by reverse phase HPLC, eluting with a 1% ammonium hydroxide buffered water/acetonitrile gradient over a Waters X-Bridge C-18 column, to afford the desired products D-1. LCMS (ESI) calc'd for C20H12FN3O3 [M+H]+: 362.1. found: 362.1.
The following examples shown in TABLE 1 were prepared following similar procedures described for Examples A, B, C, D in Schemes A-D, which can be achieved by those of ordinary skill in the art of organic synthesis in light of the present disclosure.
A mixture of i-8 (300 mg, 0.61 mmol), 4-(methoxycarbonyl)phenylboronic acid (165 mg, 0.92 mmol), Pd(dppf) Cl2 (50 mg, 0.061 mmol) and KOAc (181 mg, 1.83 mmol) in 10 ml dioxane and 2 ml pure H2O was heated to 95° C. for 2 h under microwave. Then the reaction mixture was diluted with EtOAC (50 ml), washed with brine (50 ml×2), dried over anhydrous Na2SO4, concentrated, and purified by silica gel column (Petroleum ether/EtOAc=20/1) to obtain E-1 as a white solid (180 mg, 59%). LCMS (ESI): calc'd for C24H14ClF3N2O5, [M+H]+: 503.1. found: 503.1.
The compound E-1 (180 mg, 0.36 mmol) was dissolved in CH2Cl2 (15 mL). Morpholine (37 mg, 0.43 mmol) and PYAOP (374 mg, 0.72 mmol) were added and the mixture was stirred at room temperature for 2 mins. TEA (0.16 mL, 1.08 mmol) was added and the mixture was stirred at room temperature for 2 h. Then the mixture was diluted with EtOAC (20 ml), washed with brine (2×20 ml), dried over anhydrous Na2SO4, and concentrated to obtain E-2 as a white solid (195 mg, 95%). LCMS (ESI): calc'd for C28H21ClF3N3O5, [M+H]+: 572. found: 572.
A mixture of E-2 (195 mg, 0.34 mmol) and LiOH.H2O (72 mg, 1.7 mmol) in 10 ml THF and 10 ml pure H2O was stirred at room temperature for 2 hours. The solvent was evaporated and the residue was dissolved in water. HCl (5% sol in water) was added until pH=4-5. The precipitated solid was filtered, washed with water and n-hexane, and dried to afford an off-white solid 2A (184 mg, 97%). LCMS (ESI): calc'd for C27H19ClF3N3O5, [M+H]+: 558.1 found: 558.1. 1HNMR (400 MHz, DMSO) δ 8.55 (1H, s), 8.32-8.34 (1H, d, J=8 Hz), 8.05-8.11 (3H, m), 8.01-8.03 (1H, d, J=8 Hz), 7.95-7.97 (2H, d, J=8 Hz), 7.87-7.91 (1H, m), 7.69-7.71 (1H, d, J=8 Hz), 3.52-3.72 (8H, m)
The following examples shown in TABLE 2 were prepared following similar procedures described for Examples E in Schemes E, which can be achieved by those of ordinary skill in the art of organic synthesis in light of the present disclosure.
To a solution of 3-bromo-1H-indazole (F-1) (200 mg, 1.02 mmol) in DCM (20 mL) was added DMAP (12.5 mg, 0.1 mmol), TEA (0.3 mL, 2 mmol), followed by the addition of 2-chloro-6-(trifluoromethyl)benzoyl chloride (370 mg, 1.53 mmol) in DCM (5 mL) slowly. The reaction mixture was stirred at room temperature for 3 h, then diluted with EA (100 mL), washed with sat. NaHCO3 aqueous, water and brine, concentrated, and purified with flash chromatography (PE:EA=10:1) to give 400 mg (99%) of the title compound as a yellow solid. LCMS (ESI) calc'd for C15H7BrClF3N2O [M+H]+, 402.9. found: 403, 405.
To a mixture of F-2 (110 mg, 0.4 mmol), methyl 2-amino-4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzoate (168 mg, 0.4 mmol), Pd(PPh3)4 (46 mg, 0.04 mmol) and K2CO3 (138 mg, 1 mmol) was added dioxane (15 ml) and H2O (1 ml), and the mixture was heated at 90° C. under argon for 6 h. The mixture was cooled down, and diluted with CH2Cl2 (50 mL). The organic layer was separated, washed with brine, dried over Na2SO4, and concentrated. The residue was purified by Prep-TLC (Pentane/EtOAc 10/1) to give 155 mg (71%) of the title compound. LCMS (ESI) calc'd for C23H15ClF3N3O3 [M+H]+, 474. found: 474.
To a flask was added compound F-3 (180 mg, 0.38 mmol), acetyl chloride (36 mg, 0.46 mmol), and DCM (30 mL), followed by the addition of TEA (1.3 mL, 0.95 mmol) slowly. The reaction mixture was stirred at room temperature for 2 h. The mixture was diluted with H2O, and the organic layer was separated. The aqueous layer was extracted with CH2Cl2. The combined organics were washed with H2O, brine, dried over Na2SO4, and concentrated. The residue was purified by Prep-TLC (Pentane/EtOAc, 10/1) to afford 210 g (97%) of the title compound. LCMS (ESI) calc'd for C25H17ClF3N3O4 [M+H]+: 516. found: 516.
To a stirred solution of compound F-4 (210 mg, 0.41 mmol) was added THF (8.0 mL), H2O (2.0 mL) and LiOH.H2O (172 mg, 4.1 mmol) and the solution was stirred at room temperature overnight. LCMS showed disappearance of starting material. The solution was adjusted to pH 4.0 using 1N HCl and poured into THF (30 mL), and washed with brine (20 mL). The organic layer was dried over Na2SO4, and the organic layer was evaporated and submitted for Prep-HPLC. 45 mg product was collected (23%). LCMS (ESI) calc'd for C24H15ClF3N3O4 [M+H]+: 502. found: 502. 1HNMR (500 MHz, DMSO) δ1.72 (1H, bs), 9.09 (1H, s), 8.59 (1H, d), 8.23 (1H, d), 8.06 (3H, m), 7.88 (2H, m), 7.07 (1H, s), 7.49 (1H, d), 2.15 (3H, s).
The following example shown in TABLE 3 was prepared following similar procedures described for Example 3A in Scheme F, which can be achieved by those of ordinary skill in the art of organic synthesis in light of the present disclosure.
To a mixture of methyl-4-(6-bromo-1-(2-chloro-6-(trifluoromethyl)benzoyl)-1H-indazol-3-yl)benzoate (i-9) (108 mg, 0.2 mmol), azetidin-3-ol (26 mg, 0.24 mmol), Pd2(dba)3 (16 mg, 0.02 mmol), Xphos (20 mg, 0.04 mmol) and Cs2CO3 (196 mg, 0.6 mmol) was added dioxane (10 ml), and the mixture was heated at 90° C. under argon for 6 h. The mixture was cooled down, diluted with CH2Cl2 (100 ml). The organic layer was separated, washed with brine, dried over Na2SO4, and concentrated. The residue was purified by Prep-TLC (Pentane/EtOAc=10/1) to give 120 mg of the title compound (98%). LCMS (ESI) calc'd for C26H19ClF3N3O4 [M+H]+: 530.1 found: 530.
To a stirred solution of Methyl 4-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-6-(3-hydroxyazetidin-1-yl)-1H-indazol-3-yl)benzoate (G−1) (159 mg, 0.3 mmol) was added THF (8.0 ml), H2O (2.0 ml) and LiOH.H2O (126 mg, 3 mmol) and the solution was stirred at room temperature overnight. LCMS showed disappearance of starting material. The solution was adjusted to pH 4.0 using 1N HCl and poured into THF (30 ml), and washed with brine (20 mL). The organic layer was dried over Na2SO4, and the organic layer was evaporated and submitted for Prep-HPLC (ACN/H2O). 55 mg product was collected (68%). LCMS (ESI) calc'd for C25H17ClF3N3O4 [M+H]+: 516.09. found: 516; 1HNMR (500 MHz, DMSO) δ13.24 (1H, s), 8.05 (3H, d), 8.03 (2H, d), 7.87 (3H, t), 7.36 (1H, s), 6.73 (1H, d), 5.72 (1H, bs), 4.67 (1H, m), 4.30 (2H, d), 3.76 (2H, d).
The following examples shown in TABLE 4 were prepared following similar procedures described for Examples 4A in Scheme G, which can be achieved by those of ordinary skill in the art of organic synthesis in light of the present disclosure.
A mixture of 6-nitro-1H-indazole (H−1) (5 g, 30 mmol) and NaOH (2 M, 20 ml) in 20 ml THF was made, Br2 (9.5 g, 60 mmol) dissolved in NaOH (2 M, 100 ml) was added, and the mixture was stirred at room temperature for 1 night. The solvent was evaporated, and the precipitated solid was filtered, washed with water (30 ml) and n-hexane (50 ml), and dried to afford an off-white solid H-2. LCMS (ESI): calc'd for C7H4BrN3O2 [M+H]+: 242 found: 242.
To a 250 mL round-bottomed flask, was added 3-bromo-6-nitro-1H-indazole (H-2) (9.4 g, 38.7 mmol), (2-chloro-6-(trifluoromethyl)benzoyl chloride) (10.3 g, 42.6 mmol), DMAP (472 mg, 3.87 mmol) and CH2Cl2 (100 mL); after stirring at room temperature for 3 minutes, TEA (11.2 mL, 77 mmol) was added slowly. The reaction mixture was stirred at room temperature overnight. LCMS showed that no starting materials remained. Then the mixture was poured into 30 mL water, and the lower (organic) and upper (aqueous) phases were separated. The aqueous phase was extracted twice with 50 ml CH2Cl2. The combined organic phases were washed successively with two 20 ml portions of water and 10 ml of brine. The resulting organic phase was dried over anhydrous sodium sulfate, filtered and concentrated at reduced pressure to give a yellow solid. The residue was purified by column chromatography (PE/EA from 50/1 to 10/1), to give a solid H-3. LCMS (ESI): calc'd for C15H6BrClF3N3O3 [M+H]+: 448. found: 448.
A mixture of (3-bromo-6-nitro-1H-indazol-1-yl) (2-chloro-6-(trifluoromethyl)phenyl)methanone (H-3) (10 g, 20 mmol) and SnCl2 (21 g, 10 mmol) in 100 ml EtOH was made, and stirred at 80° C. for 4 hours. The solvent was evaporated with EtOAc (100 ml×3) and water (200 ml). The organic phase was collected and evaporation-dried to afford an off-white solid H-4. LCMS (ESI): calc'd for C15H8BrClF3N3O, [M+H]+: 418 found: 418.
A 30 ml microwave vial was charged with (6-amino-3-bromo-1H-indazol-1-yl)(2-chloro-6-(trifluoromethyl)phenyl)methanone (H-4) (2 g, 4.8 mmol), 2-fluoro-4-(methoxycarbonyl)phenylboronic acid (1 g, 5.2 mmol), Pd(OAc)2 (54 mg, 0.24 mmol), Catacxium A (86 mg, 0.24 mmol) and KF (835 mg, 14.4 mmol) dissolved in anhydrous THF (5 ml). A stir bar was added, the vial was sealed, and the reaction was heated for 2 hours at a constant temperature of 80° C. The mixture was filtered and the filtrate was collected, then purified by column chromatography (DCM) to obtain the desired product H-5. LCMS (ESI): calc'd for C23H14ClF4N3O3 [M+H]+: 492 found: 492.
Methyl 4-(6-amino-1-(2-chloro-6-(trifluoromethyl)benzoyl)-1H-indazol-3-yl)-3-fluorobenzoate (H-5)(186 mg, 0.38 mmol), methyl carbonochloridate (40 mg, 0.43 mmol), DMAP (5 mg, 0.04 mmol) and CH2Cl2 (100 mL) were combined, and after stirring at room temperature for 3 minutes, TEA (0.1 mL, 0.77 mmol) was added slowly. The reaction mixture was stirred at room temperature overnight. The reaction mixture was concentrated at reduced pressure to give a yellow solid H-6. LCMS (ESI): calc'd for C25H16ClF4N3O5 [M+H]+: 550. found: 550.
A mixture of methyl 4-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-6-(methoxycarbonylamino)-1H-indazol-3-yl)-3-fluoro benzoate (H-6) (38 mg, 0.07 mmol) and LiOH.H2O (16 mg, 0.37 mmol) in 10 ml THF and 10 ml pure H2O was stirred at room temperature for 2 hours. The solvent was evaporated and the residue was dissolved in water. HCl (5% sol in water) was added until pH=4-5. The precipitated solid was filtered, washed with water (10 ml) and n-hexane (10 ml), and dried to afford an off-white solid 5A. LCMS (ESI): calc'd for C24H14ClF4N3O5 [M+H]+: 536 found: 536; 1HNMR (400 MHz, DMSO) δ 13.54 (1H, s), 10.32 (1H, s), 8.93 (1H, s), 7.97-8.03 (2H, m), 7.83-7.91 (4H, m), 7.70-7.75 (1H, m), 7.61-7.63 (1H, d, J=8 Hz), 3.76 (3H, s).
A mixture was made of Methyl 4-(6-amino-1-(2-chloro-6-(trifluoromethyl)benzoyl)-1H-indazol-3-yl)-3-fluorobenzoate (H-5) (344 mg, 0.7 mmol) in 10 ml DMF under ice bath, CH3I (0.07 ml, 0.14 mmol) was added, and then the icebath was removed and stirring occurred at room temperature for 5 hours. The solvent was extracted with EtOAc (30 ml) and water (3×20 ml), the organic phase was collected, and the residue purified by column chromatography on silica gel eluting with (PE/DCM=2:1) to obtain the desired product I-1. LCMS (ESI) calc'd for C24H16ClF4N3O3 [M+H]+: 506. found: 506.
Methyl 4-(1-(2-chloro-6-(tri-fluoromethyl)benzoyl)-6-(methylamino)-1H-indazol-3-yl)-3-fluorobenzoate (I-1) (19 2 mg, 0.38 mmol), acetyl chloride (33 mg, 0.43 mmol), DMAP (5 mg, 0.04 mmol) and CH2Cl2 (100 mL) were combined, and after stirring at room temperature for 3 minutes, TEA (0.1 ml, 0.77 mmol) was added slowly. The reaction mixture was stirred at room temperature overnight. The reaction mixture was concentrated at reduced pressure to give a yellow solid I-3. LCMS (ESI): calc'd for C26H18ClF4N3O4 [M+H]+: 548. found: 548.
A mixture of 4-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-6-(N-methylacetamido)-1H-indazol-3-yl)-3-fluorobenzoate (I-2) (38 mg, 0.07 mmol) and LiOH.H2O (16 mg, 0.37 mmol) in 10 ml THF and 10 ml pure H2O was stirred at room temperature for 2 hours. The solvent was evaporated and the residue was dissolved in water. HCl (5% in water) was added until pH=4-5. The precipitated solid was filtered, washed with water (10 ml) and n-hexane (10 ml), and dried to afford an off-white solid 5B. LCMS (ESI): calc'd for C25H16ClF4N3O4[M+H]+: 534. found: 534; 1HNMR (400 MHz, DMSO) δ 8.46 (1H, s), 7.98-8.05 (3H, m), 7.87-7.93 (3H, s), 7.76 (1H, s), 7.61-7.63 (1H, d, J=8 Hz), 3.36 (3H, s), 2.01 (3H, s)
The following examples shown in TABLE 5 were prepared following similar procedures described for Examples #5A, 5B in Schemes H, I, which can be achieved by those of ordinary skill in the art of organic synthesis in light of the present disclosure.
To a microwave tube was added methyl-4-(6-bromo-1-(2-chloro-6-(trifluoromethyl)benzoyl)-1H-ind-azol-3-yl)-3-fluorobenzoate (i-9) (70 mg, 0.14 mmol), dioxane (1.5 ml), imidazolidin-2-one (17 mg, 0.21 mmol), Pd2(dba)3 (6.3 mg, 0.007 mmol), xant-phos (11.7 mg, 0.021 mmol), Cs2CO3 (86 mg, 0.28 mmol). The solution was microwaved at 100° C. for 2 hours and the organic layer was evaporated for use in the next step without purification. LCMS (ESI) calc'd for C26H17ClF4N4O4 [M+H]+: 561. found: 561.
To a stirred solution of methyl 4-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-6-(2-oxoimidazolidin-1-yl)-1H-indazol-3-yl)-3-fluorobenzoate (J−1) in dioxane (1.5 ml) from the previous step was added LiOH.H2O (59 mg, 1.4 mmol) and H2O (0.5 ml). The solution was stirred overnight and LCMS showed major product peak. The solution was adjusted to pH=3 using 1 N HCl. The upper organic layer was collected and the aqueous layer was extracted with THF (2×1 mL). To the combined organic layer was added 0.5 mL MeOH, and submitting for Prep-HPLC (H2O/ACN) gave 10 mg of product, the yield for two steps being 26%. LCMS (ESI) calc'd for C25H15ClF4N4O4 [M+H]+: 547. found: 547; 1HNMR (400 MHz, DMSO) δ 13.44 (1H, s), 8.75 (1H, s), 8.01 (2H, m), 7.98-7.89 (5H, m), 7.71 (1H, d), 4.08-4.05 (2H, d), 3.52-3.33 (2H, d).
The mixture of methyl 4-(6-bromo-1-(2-chloro-6-(trifluoromethyl)benzoyl)-1H-indazol-3-yl)-3-fluorobenzoate (554 mg, 1.0 mmol), Pd(dppf)2Cl2 (79 mg, 0.1 mmol), azetidin-2-one (114 mg, 2.0 mmol), TEA (20 ml) and DMF (20 ml) was purged with N2 and stirred at 90° C. overnight. LCMS showed the starting material was completely consumed, and the expected product appeared. The resulting solution was filtered, concentrated, and purified by column chromatography (PE/EA) to give 248 mg product as a white solid (45%). LCMS (ESI) calc'd for C26H16ClF4N3O4 [M+H]+: 545.87. found: 546.2.
o the solution of methyl 4-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-6-(2-oxoazetidin-1-yl)-1H-indazol-3-yl)-3-fluorobenzoate (K-1) (53.1 mg, 0.1 mmol) in THF (30 ml) and water (10 ml) was added LiOH (240 mg, 10 mmol). The mixture solution was stirred at 0° C. for 2 h. 100 ml HCl aqueous was added, followed by extracting with EA (30 ml×3), and the organic layer was concentrated and purified by chromatography column (EA:PE=1:1) to afford 27 mg product (51%). LCMS (ESI) calc'd for C25H14ClF4N3O4 [M+H]+: 531.84. found: 532.1; 1HNMR (400 MHz, CDCl3) δ:13.5 (1H, w), 8.46 (1H, s), 7.98 (6H, m), 7.72 (1H, t), 7.61 (1H, d), 3.85 (2H, m), 3.21 (2H, m).
To the solution of methyl 4-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-6-(2-oxoazetidin-1-yl)-1H-indazol-3-yl)-3-fluorobenzoate (K-1) (53.1 mg, 0.1 mmol) in THF (30 ml) and water (10 ml) was added LiOH (240 mg, 10 mmol). The mixture solution was stirred at room temperature for 12 h. 100 ml HCl aqueous was added, followed by extracting with EA (30 ml×3), and then the organic layer was concentrated and purified by chromatography column (EA:PE=1:1) to afford 39 mg product (yield: 72%). LCMS (ESI) calc'd for C24H14ClF4N3O5 [M+H]+: 549.86. found: 550.1. 1HNMR (400 MHz, CDCl3) δ:13.1 (2H, w), 7.9 (5H, m), 7.66 (1H, t), 7.541 (2H, m), 6.91 (1H, m), 3.41 (2H, m), 2.62 (2H, m).
The following examples shown in TABLE 6 were prepared following similar procedures described for Examples #6A, 6B, 6C in Schemes J, K, L, which can be achieved by those of ordinary skill in the art of organic synthesis in light of the present disclosure.
To a solution of 5-bromo-2-methyl-3-nitropyridine (1) (15 g, 69.4 mmol) in EtOH (300 mL) and water (70 ml), was added iron powder (46.7 g, 833 mmol) and ammonium chloride (4.5 g, 83.4 mmol) successively at room temperature. The reaction mixture was heated to 90° C. for 40 min. The reaction was filtered hot and rinsed with EtOAc. The filtrate was washed with a saturated aqueous solution of sodium bicarbonate (200 mL), washed with brine, dried over magnesium sulfate and solvent removed in vacuo to give the title compound as an orange solid, (11.7 g, 62.9 mmol, 90%). LCMS (ESI) calc'd for C6H7BrN2 [M+H]+: 187. found: 187, 188.
To a solution of 5-bromo-2-methylpyridin-3-amine (M-2) (10.7 g, 57.5 mmol) in dichloromethane (575 mL) was added acetic anhydride (12 mL, 126.5 mmol) at 0° C., followed by triethylamine (22 mL, 158 mmol). The mixture was allowed to warm to ambient temperature and stirred for 18 hours at which point a further equivalent of acetic anhydride (6 mL, 63 mmol) was added. The mixture was stirred at ambient temperature for a further 18 hours. The reaction mixture was quenched with a saturated aqueous solution of sodium bicarbonate (500 mL) and the organic phase washed with saturated aqueous sodium chloride (500 mL), dried over magnesium sulfate and concentrated in vacuo to give a brown solid. This solid was triturated with 30% ethyl acetate in hexanes to yield the title compound as an off-white solid, (8.28 g, 36 mmol, 63%). 1HNMR (400 MHz, CD3OD): δ ppm 8.31 (s, 1H), 8.18 (s, 1H), 2.43 (s, 3H), 2.18 (s, 3H). LCMS (ESI) calc'd for C8H9BrN2O [M+H]+: 228.99. found: 229, 230.
To a solution of N-(5-bromo-2-methylpyridin-3-yl)acetamide (M-3) (8.3 g, 36 mmol) in chloroform (550 mL) at ambient temperature was added potassium acetate (4.3 g, 43.6 mmol), acetic acid (2.5 mL, 43.6 mmol) and followed by acetic anhydride (6.9 mL, 72.6 mmol). The mixture was stirred at ambient temperature for 15 minutes before being heated to 40° C. Tert-butyl nitrite (6.5 mL, 54 mmol) was then added dropwise. The reaction was then stirred at 60° C. for 48 hours. The reaction mixture was poured slowly into a saturated solution of sodium bicarbonate (500 mL) at 0° C. The organic phase was retained and the aqueous phase extracted with dichloromethane (500 mL). The combined organics were then concentrated to a brown oil which was dissolved in methanol (500 mL). Aqueous sodium hydroxide (2 M, 500 mL) was added at 0° C. and the mixture stirred at ambient temperature for 1 hour before the methanol was removed in vacuo. The aqueous mixture was then extracted with ethyl acetate (3×500 mL). The combined organics were dried over magnesium sulfate, and the solvent removed in vacuo to give the title compound as a light brown solid (5.5 g, 27.9 mmol, 77%). 1HNMR (400, CD3OD): δ ppm 8.55 (s, 1H), 8.24 (s, 1H), 8.21 (s, 1H). LCMS (ESI) calc'd for C6H4BrN3 [M+H]+: 197.96. found: 198, 199.
To a solution of 6-bromo-1H-pyrazolo[4,3-b]pyridine (M-4) (0.5 g, 2.5 mmol) in methanol (15 ml) and acetonitrile (7 ml) was added Et3N (2.2 ml, 5.6 mmol), Binap (0.17 g, 0.63 mmol) and palladium dichloride (0.17 g, 0.27 mmol). The mixture was placed under 20 bar of carbon monoxide, and stirred at 100° C. for 18 h. The mixture was cooled, filtered and purified by Prep-TLC to give 310 mg of a white solid. (69%). LCMS (ESI) calc'd for [M+H]+: 178.1. found: 178.1.
o a solution of methyl 1H-pyrazolo[4,3-b]pyridine-6-carboxylate (M-5) (316 mg, 1.8 mmol) in DMAC (30 ml) was added KOH (40 mg, 7.18 mmol). The vigorously stirred mixture was treated with iodine (550 mg, 2.15 mmol) and added portionwise over 5 minutes then stirred for 60 minutes. The reaction was quenched with 20 ml of 20% citric acid solution, followed by 16 ml of saturated NaHSO3 solution, then adjusted to pH=8 with solid NaHCO3 and partitioned between ethyl acetate and water. The organic extract was dried and concentrated to a dark-red oil containing DMAC for use in the next step directly. LCMS (ESI) calc'd for [M+H]+: 304.1. found: 304.1.
To the solution of methyl 3-iodo-1H-pyrazolo[4,3-b]pyridine-6-carboxylate (M-6) (400 mg, 1.32 mmol), Et3N (290 mg) and DMAP (32 mg, 0.26 mmol) dissolved in anhydrous DCM (10 ml) was added 2-chloro-6-(trifluoromethyl)benzoyl chloride (630 mg, 2.64 mmol) in anhydrous DCM (10 ml) dropwise. The mixture solution was protected by N2 and stirred at room temperature for 20 h. Then the solution was concentrated to afford 500 mg product (78%). LCMS (ESI) calc'd [M+H]+: 510.1. found: 510.1.
To the solution of methyl 1-(2-chloro-6-(trifluoromethyl)benzoyl)-3-iodo-1H-pyrazolo[4,3-b]pyridine-6-carboxylate (M-7) (700 mg, 1.37 mmol) in THF (15 mL) and H2O (5 mL) was added LiOH (242 mg, 10.9 mmol). The mixture solution was stirred at room temperature for 24 h. Water (10 ml) was added, then the solution was acidified by HCl (2 M) and extracted with EtOAc (20 ml×3). The combined organic layer was dried, filtered, concentrated, and purified by Prep-HPLC to afford 670 mg (99%). LCMS (ESI) calc'd [M+H]+: 496.1. found: 496.1.
The mixture of 1-(2-chloro-6-(trifluoromethyl)benzoyl)-3-iodo-1H-pyrazolo[4,3-b]pyridine-6-carboxylic acid (M-8) (100 mg, 0.20 mmol), 2-fluoro-4-(methoxycarbonyl phenylboronic acid (100 mg, 0.5 mmol), Pd(dppf)Cl2 (44 mg, 0.06 mmol), Na2CO3 (50 mg, 0.6 mmol) in dioxane (4 ml) and H2O (0.5 mL) was stirred at 100° C. under microwave for 1 h. Then the reaction mixture was filtered, concentrated, and purified by Prep-HPLC to afford 60 mg product (58%). LCMS (ESI) calc'd [M+H]+: 522.0. found: 522.0.
1-(2-Chloro-6-(trifluoromethyl)benzoyl)-3-(2-fluoro-4-(methoxycarbonyl)phenyl)-1H-pyrazolo[4,3-b]pyridine-6-carboxylic acid (M-9) (180 mg, 0.36 mmol) was dissolved in CH2Cl2 (15 mL). Morpholine (37 mg, 0.43 mmol) and PYAOP (374 mg, 0.72 mmol) were added and the mixture was stirred at room temperature for 2 min. TEA (0.16 mL, 1.08 mmol) was added and the mixture was stirred at room temperature for 2 h. Then the reaction mixture was diluted with EtOAc (20 ml), washed with brine (20 ml×2), dried with anhydrous Na2SO4, and concentrated to obtain a white solid 195 mg (95%). LCMS (ESI): calc'd for C28H21 ClF3N3O5, [M+H]+: 572. found: 572.
A mixture of methyl 4-(1-(2-ch-loro-6-(trifluoromethyl)benzoyl)-6-(morpholine-4-carbonyl)-1H-indazol-3-yl)benzoate (M-10) (195 mg, 0.34 mmol) and LiOH (72 mg, 1.7 mmol) in 10 ml THF and 10 ml H2O was stirred at room temperature for 2 hours. The solvent was evaporated and the residue was dissolved in water. HCl (5% sol. in water) was added until pH was 4-5. The precipitated solid was filtered, washed with water and n-hexane, and dried to afford an off-white solid 184 mg (97%). LCMS (ESI): calc'd for C27H19ClF3N3O5, [M+H]+: 558.1 found: 558.1. 1HNMR (400 MHz, DMSO) δ 8.55 (1H, s), 8.32-8.34 (1H, d, J=8 Hz), 8.05-8.11 (3H, m), 8.01-8.03 (1H, d, J=8 Hz), 7.95-7.97 (2H, d, J=8 Hz), 7.87-7.91 (1H, m), 7.69-7.71 (1H, d, J=8 Hz), 3.52-3.72 (8H, m).
1-(2-Chloro-6-(trifluoromethyl)benzoyl)-3-(2-fluoro-4-(methoxycarbonyl)phenyl)-1H-pyrazolo[4,3-b]pyridine-6-carboxylic acid (M-9) (100 mg, 0.19 mmol) was dissolved in CH2Cl2 (10 mL). O,N-dimethylhydroxylamine (22 mg, 0.23 mmol) and HATU (94 mg, 0.25 mmol) were added and the resulting reaction mixture was stirred at room temperature for 2 min, followed by the addition of TEA (23 mg, 0.23 mmol). The reaction mixture was stirred at room temperature overnight. Then the reaction mixture was diluted with EtOAc (15 ml), washed with brine (15 ml×2), dried over anhydrous Na2SO4, and concentrated to obtain a crude solid N-2 (80 mg). LCMS (ESI): calc'd for C25H17ClF4N4O5, [M+H]+: 564.7. found: 564.7.
A mixture of methyl 4-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-6-(methoxy(methyl)carbamoyl)-1H-pyrazolo[4,3-b]pyridin-3-yl)-3-fluorobenzoate (N−1) (80 mg, 0.14 mmol) and LiOH.H2O (30 mg, 0.7 mmol) in 5 ml THF and 5 ml H2O was stirred at room temperature for 2 hours. The solvent was evaporated and the residue was dissolved in water. HCl (5% sol. in water) was added until pH was 4-5. The product was extracted by EtOAc, and concentrated to obtain a crude solid. The product was purified by prep-HPLC to obtain 7B (10 mg), yield 14.1%. Physical characterization data for 7B was as follows: LCMS (ESI): calc'd for C22H10ClF4N3O5, [M+H]+: 508. found: 508. 1HNMR (400 MHz, MeOD) δ 9.43-9.47 (2H, d, J=13.6 Hz), 8.35-8.38 (1H, m), 7.99-8.02 (1H, d, J=8 Hz), 7.89-7.93 (2H, m), 7.80-7.88 (2H, m).
The following examples shown in TABLE 7 were prepared following similar procedures described for Examples 7A, 7B in Schemes M, N, which can be achieved by those of ordinary skill in the art of organic synthesis in light of the present disclosure.
To a solution of methyl 1H-pyrazolo[4,3-b]pyridine-6-carboxylate (O-1) (2 g, 11.3 mmol) in THF (50 mL) was added NBS (3 g, 16.9 mmoL). The reaction mixture was stirred overnight at room temperature, then methanol was added to quench the reaction. The reaction mixture was concentrated to give a crude product, triturated with EtOAc, and filtered, and 2.5 g (87%) of title compound as a white solid was collected. LCMS (ESI): calc'd for C8H6BrN3O2 [M+H]+: 256. found: 256.
To a solution of methyl 3-bromo 1H-pyrazolo[4,3-b]pyridine-6-carboxylate (O-2) (2.5 g, 9.8 mmol) in DCM (100 mL) was added TEA (2 mL, 14.7 mmol), DMAP (240 mg, 2 mmol), then 2-chloro-6-(trifluoromethyl)benzoyl chloride (3.1 g, 12.7 mmol) in DCM (10 mL) dropwise. The reaction was stirred for 3 h at room temperature, then diluted with EtOAc (200 mL), and the organic layer was washed with sat. NaHCO3 aqueous, washed with water and brine, dried over Na2SO4, concentrated, and purified by flash chromatography (PE:EA=10:1) to give 4.3 g (95%) of the title compound as a light yellow solid. LCMS (ESI): calc'd for C16H8BrClF3N3O3 [M+H]+: 462. found: 462.
To a solution of methyl 3-bromo-1-(2-chloro-6-(trifluoromethyl)benzoyl)-1H-pyrazolo[4,3-b]pyridine-6-carboxylate (O-3) (2 g, 4.3 mmol) in dried THF (50 mL) was added DIBAL (1M in THF, 13 mL) slowly at −40° C., then the reaction mixture was warmed to room temperature and stirred for 3 h. The reaction mixture was cooled to 0° C., and 15% NaOH aqueous (5 ml) and water (5 mL) were added successively and slowly, and the mixture was stirred for another 30 min, filtered, concentrated, and purified with flash chromatography (PE:EA=3:1) to give 1.4 g (75%) of title compound as a light yellow solid. LCMS (ESI): calc'd for C16H8BrClF3N3O3 [M+H]+: 434. found: 434.
A mixture of (3-bromo-6-(hydroxymethyl)-1H-pyrazolo[4,3-b]pyridin-1-yl) (2-chloro-6-(trifluoromethyl)phenyl)methanone (O-4) (1.3 g, 3.0 mmol), 2-fluoro-4-(methoxycarbonyl)phenylboronic acid (1.2 g, 6.0 mmol), Pd(dppf)Cl2 (367 mg, 0.45 mmol), and K3PO4 (1.9 g, 9.0 mmol) in 8 mL dioxane and water (7:1) was heated at 10° C. for 1 h with an oil-bath. The reaction mixture was filtrated and washed with EtOAc, the organic phase was concentrated, and the product was purified with column chromatography (PE:EA=3:1) to obtain a yellow solid O-5 (800 mg), yield 52.6%. Physical characterization data for O-5 was as follows: LCMS (ESI): calc. C23H14ClF4N3O4, 507.7. found: M+H=508.7.
4-(1-(2-Chloro-6-(trifluoromethyl)benzoyl)-6-(hydroxymethyl)-1H-pyrazolo[4,3-b]pyridine-3-yl)-3-fluorobenzoate (O-5) (670 mg, 1.32 mmol) was dissolved in DCM (15 mL), Dess-Martin reagent (840 mg, 1.98 mmol) was added, then the mixture was stirred at room temperature for 2 h. The solvent was evaporated and the product was purified with column chromatography (PE:EA=3:1) to obtain solid O-6 (580 mg), yield 87%. Physical characterization data for O-6 was as follows: LCMS (ESI): calc. C23H12ClF4N3O4, 505.7. found: M+H=506.7.
A 50 ml, round-bottomed flask was degassed with nitrogen and cooled to −78° C., cyclopropylmagnesium bromide (4 mL, 2.0 mmol) was added, then methyl 4-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-6-formyl-1H-pyrazolo[4,3-b]pyridine-3-yl)-3-fluorobenzoate (O-6) (80 mg, 0.16 mmol) in THF (3 mL, anhydrous) was added slowly. The mixture was stirred from −78° C. to room temperature for 4 h. Water was added, and the solvent was evaporated. The product was purified with Prep-HPLC to obtain white solid O-7 (26 mg), yield 29.7%. Physical characterization data for O-7 was as follows: LCMS (ESI): calc. C26H18ClF4N3O4, 547.7. found: M+H=548.7.
A mixture of methyl 4-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-6-(cyclopropyl(hydroxy)methyl)-1H-pyrazolo[4,3-b]pyridin-3-yl)-3-fluorobenzoate (O-7) (26 mg, 0.05 mmol) and LiOH.H2O (10 mg, 0.24 mmol) in 2 ml THF and 2 ml H2O was stirred at room temperature for 2 hours. The solvent was evaporated and the residue was dissolved in water. HCl (5% sol in water) was added until pH 4-5. The product was extracted by EtOAc, and concentrated to obtain crude solid. The product was purified by prep-HPLC to obtain O-8 (4 mg), yield 15.79%. Physical characterization data for 8A was as follows: LCMS (ESI): calc. C25H16ClF4N3O4, 533.7. found: M+H=533.7. 1HNMR (400 MHz, MeOD) δ 8.97-9.00 (2H, d, J=12 Hz), 8.26-8.30 (1H, m), 7.98-8.00 (1H, d, J=8 Hz), 7.84-7.90 (3H, m), 7.77-7.81 (1H, m), 4.37-4.39 (1H, d, J=8.4 Hz), 1.29-1.33 (1H, m), 0.74-0.78 (1H, m), 0.67-0.72 (2H, m), 0.57-0.63 (1H, m).
Methyl 4-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-6-(cyclopropyl(hydroxy)methyl)-1H-pyrazolo[4,3-b]pyridin-3-yl)-3-fluorobenzoate (P−1) (25 mg, 0.05 mmol) was dissolved in DCM (5 mL), Dess-Martin reagent (29 mg, 0.069 mmol) was added, then the mixture was stirred at room temperature for 3 h. The solvent was evaporated and the product was purified with column chromatography (PE:EA=4:1) to obtain crude solid P-2 (10 mg). Physical characterization data for P-2 was as follows: LCMS (ESI): calc. C26H16ClF4N3O4, 545.7. found: M+H=546.7.
A mixture of methyl 4-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-6-(cyclopropanecarbonyl)-1H-pyrazolo[4,3-b]pyridin-3-yl)-3-fluorobenzoate (P-2) (10 mg, 0.02 mmol) and LiOH.H2O (8 mg, 0.18 mmol) in 2 mL THF and 2 mL H2O was stirred at room temperature for 2 hours. The solvent was evaporated and the residue was dissolved in water. HCl (5% sol. in water) was added until pH 4-5. The product was extracted by EtOAc, and concentrated to obtain crude solid. The product was purified by Prep-HPLC to obtain 8B (2 mg), yield 2.35%. Physical characterization data for 8B was as follows: LCMS (ESI): calc. C25H14ClF4N3O4, 531.7. found: M+H=531.7. 1HNMR (400 MHz, DMSO) δ 9.553 (1H, s), 9.312 (1H, s), 8.377 (1H, s), 8.04-8.08 (1H, m), 7.96-8.01 (1H, m), 7.88-7.92 (1H, m), 7.01-7.84 (1H, d, J=10.4 Hz), 3.16-3.18 (1H, m), 1.15-1.22 (4H, m).
The following examples shown in TABLE 8 were prepared following similar procedures described for Examples 8A, 8B in Schemes 0, P, which can be achieved by those of ordinary skill in the art of organic synthesis in light of the present disclosure.
Methyl 3-amino-4-methylbenzoate (Q−1) (5.0 g, 30.2 mmol) was dissolved in AcOH (140 mL). Sodium nitrite (2.1 g, 30.2 mmol) in water (3.5 mL) was added dropwise to the solution of starting material under ice-cooling at room temperature. The ice-bath was removed and the mixture was stirred overnight. Half of the solvents were evaporated, and the mixture was diluted with water (80 mL) and extracted with EtOAc (30 mL×3). The collected organic phase was washed with water and brine (200 mL×2), dried, and evaporated to afford the crude product Q-2 (4.4 g). LCMS (ESI): calc'd for C9H8N2O2, [M+H]+: 177.1. found: 177.1.
Methyl 1H-indazole-6-carboxylate (Q-2) (5.0 g, 28.3 mmol) was dissolved in anhydrous DMAC (50 mL). Iodine (14.4 g, 56.7 mmol) and potassium hydroxide (6.3 g, 113.5 mmol) were added in portions under ice-cooling at room temperature. The ice-bath was removed and the mixture was stirred at room temperature for 1 h. The reaction was monitored by TLC (25% MeOH in chloroform) then slowly quenched with Na2S2O3 (sat. sol. in water, 100 mL), diluted with water (50 mL), and extracted with EtOAC (100 mL×3). The organic phase was evaporated and triturated with n-hexane. The precipitated material was filtered and dried to afford a brown solid Q-3 5.3 g (62%). LCMS (ESI): calc'd for C9H7IN2O2, [M+H]+: 302.9. found: 302.9.
To a 250 mL round-bottomed flask was added compound methyl 3-iodo-1H-indazole-6-carboxylate (Q-3) (11.7 g, 38.7 mmol), 2-chloro-6-(trifluoromethyl)benzoyl chloride (Q-4) (10.3 g, 42.6 mmol), DMAP (4.72 g, 38.7 mmol) and CH2Cl2 (100 mL). After stirring at room temperature for 3 minutes, TEA (11.2 mL, 77 mmol) was added slowly. The reaction mixture was stirred at room temperature overnight. LCMS showed that no starting materials remained. Then the mixture was poured into 30 mL water, and the lower (organic) and upper (aqueous) phases were separated. The aqueous phase was extracted twice with 20 mL CH2Cl2. The combined organic phases were washed successively with two 20 mL portions of water and 10 mL of brine. The resulting organic phase was dried over anhydrous sodium sulfate, filtered and concentrated at reduced pressure to give a yellow solid. The residue was purified by column chromatography on 60 g on silica gel eluting with PE/EA from 50/1 to 10/1, to give a fawn solid Q-5 16.5 g (84%). LCMS (ESI): calc'd for C17H9ClF3IN2O3, [M+H]+: 508.9. found: 508.9.
A mixture of 1-(2-chloro-6-(trifluoromethyl)benzoyl)-3-iodo-1H-indazole-6-carboxylate (Q-5) (16.5 g, 32.48 mmol) and LiOH (3.40 g, 162.40 mmol) in 10 mL THF and 50 mL pure H2O was stirred at room temperature overnight. The solvent was evaporated and the residue was dissolved in water. HCl (5% sol. in water) was added until pH 4-5. The precipitated solid was filtered, washed with water and n-hexane, and dried to afford an off-white solid Q-6 16.0 g (83%). LCMS (ESI): calc'd for C16H7ClF3IN2O3, [M+H]+: 494.9. found: 494.9.
A mixture of 1-(2-chloro-6-(trifluoromethyl)benzoyl)-3-iodo-1H-indazole-6-carboxylic acid (Q-6) (300 mg, 0.61 mmol), 4-(methoxycarbonyl)phenylboronic acid (165 mg, 0.92 mmol), Pd(dppf)Cl2 (50 mg, 0.061 mmol) and KOAc (181 mg, 1.83 mmol) in 10 mL dioxane and 2 mL pure H2O was heated to 95° C. for 2 h under microwave. Then the reaction mixture was diluted with EA (50 mL), washed with brine (50 mL×2), dried over anhydrous Na2SO4, concentrated, and purified by silica gel column (Petroleum ether/EtOAc=20/1) to obtain white solid Q-7 180 mg (59%). LCMS (ESI): calc'd for C24H14ClF3N2O5, [M+H]+: 503.1. found: 503.1.
1-(2-Chloro-6-(trifluoromethyl)benzoyl)-3-(4-(methoxycarbonyl)phenyl)-1H-indazole-6-carboxylic acid (Q-7) (180 mg, 0.36 mmol) was dissolved in CH2Cl2 (15 mL). 1-aminopropan-2-one hydrochloride (47 mg, 0.43 mmol) and PYAOP (374 mg, 0.72 mmol) were added and the mixture was stirred at room temperature for 2 mins. TEA (0.16 mL, 1.08 mmol) was added and the mixture was stirred at room temperature for 2 h. Then the mixture was diluted with EtOAC (20 ml), washed with brine (20 ml×2), dried over anhydrous Na2SO4, and concentrated to obtain crude product Q-8 (191 mg), which was used in the next step without further purification. LCMS (ESI): calc'd for C27H19ClF3N3O5, [M+H]+: 558.1. found: 558.1.
POCl3 (3.5 mL) was added to a solution of methyl 4-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-6-(2-oxopropylcarbamoyl)-1H-indazol-3-yl)benzoate (Q-8) (191 mg, 0.34 mmol) in pyridine (7 mL) at 25° C. The resulting solution was then warmed to 70° C. and stirred for 6 hours. Upon completion, the reaction mixture was cooled to 25° C., diluted with EtOAc (10 mL), poured into a cold (0° C.) solution of saturated aqueous NaHCO3 (50 mL), and extracted with EtOAc (25 mL×3). The combined organic layers were then washed with water (50 mL) and brine (50 mL), dried (MgSO4), and concentrated to obtain a crude product Q-9 (40 mg). LCMS (ESI): calc'd for C27H17ClF3N3O4, [M+H]+: 540.1. found: 540.1.
A mixture of methyl 4-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-6-(5-methyloxazol-2-yl)-1H-indazol-3-yl)benzoate (Q-9) (40 mg, 0.07 mmol) and LiOH (16 mg, 0.37 mmol) in 10 mL THF and 10 mL pure H2O was stirred at room temperature for 2 hours. The solvent was evaporated and the residue was dissolved in water. HCl (5% sol in water) was added until pH was 4-5. The precipitated solid was filtered, washed with water and n-hexane, and dried to afford an off-white solid Q-10 36 mg (98%). LCMS (ESI): calc'd for C26H15ClF3N3O4, [M+H]+: 526 found: 526.
4-(1-(2-Chloro-6-(trifluoro methyl)benzoyl)-6-(5-methyloxazol-2-yl)-1H-indazol-3-yl)benzoic acid (Q-10) (36 mg, 0.069 mmol) was added to H2O (10 mL) and the mixture was sonicated for 10 min. Then 0.1 mol/L NaOH (0.7 mL, 0.07 mmol) was added to the solution at 0° C. and the reaction mixture was stirred at 0° C. for 30 mins. Then the mixture was dried by Freeze dryer to obtain compound 9A 38 mg (100%). LCMS (ESI): calc'd for C26H14ClF3N3NaO4, [M+H]+: 548. found: 548. 1HNMR (400 MHz, DMSO) δ 9.04 (1H, s), 8.37-8.39 (1H, d, J=8 Hz), 8.18-8.20 (1H, d, J=8 Hz), 8.06-8.08 (1H, d, J=8 Hz), 8.00-8.02 (3H, d, J=8.8 Hz), 7.87-7.91 (1H, m), 7.78-7.80 (2H, d, J=8 Hz), 7.16 (1H, s), 2.48 (3H, s)
The following example shown in TABLE 9 was prepared following similar procedures described for Example 9A in Scheme Q, which can be achieved by those of ordinary skill in the art of organic synthesis in light of the present disclosure.
To a solution of methyl 4-(6-bromo-1-(2-chloro-6-(trifluoromethyl)benzoyl)-1H-indazol-3-yl)benzoate (S−1) (53.5 mg, 0.1 mmol) in DMF (5 mL) and TEA (10 mL) was added 2-(prop-2-ynyloxy)-tetrahydro-2H-pyran (16.8 mg, 0.12 mmol), copper(I) iodide (10 mg, 0.01 mmol) and PdCl2(PPh3)2 (10 mg, 0.01 mmol) under argon. The mixture was stirred under argon for 2 hours at 80° C. The mixture was diluted with H2O. The aqueous layer was extracted with CH2Cl2 (3×50 mL). The combined organics were washed with H2O, brine, dried over Na2SO4, and concentrated. The residue was purified by Prep-TLC (Pentane/EtOAc, 5/1) to afford 48 mg (58%) of the title compound. LCMS (ESI) calc'd for C31H24ClF3N2O5 [M+H]+: 597.1. found: 597.1.
o a solution of methyl 4-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-6-(3-(tetrahydro-2H-pyran-2-yloxy)prop-1-ynyl)-1H-indazol-3-yl)benzoate (S-2) (200 mg, 0.34 mmol) in MeOH (10 mL) was added TsOH (12 mg, 0.07 mmol) at 0° C. The mixture was stirred for 12 hours at room temperature. The mixture was diluted with H2O. The aqueous layer was extracted with CH2Cl2 (3×80 mL). The combined organics were washed with H2O, brine, dried over Na2SO4, and concentrated. The residue was purified by Prep-TLC (Pentane/EtOAc, 3/1) to afford 110 mg (64%) of the title compound. LCMS (ESI) calc'd for C26H16ClF3N2O4[M+H]+: 513.1. found: 513.1.
To a stirred solution of methyl 4-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-6-(3-hydroxyprop-1-ynyl)-1H-indazol-3-yl)benzoate (S-3) (300 mg, 0.5 mmol) was added THF (8.0 mL), H2O (2.0 mL) and LiOH.H2O (108 mg, 2.5 mmol) and the solution was stirred at room temperature overnight. LCMS showed disappearance of starting material. The solution was adjusted to pH 4.0 using 1N HCl and poured into THF (30 mL), and washed with brine (20 mL). The organic layer was dried over Na2SO4, evaporated, and submitted for Prep-HPLC. 100 mg of the product was collected. Yield: 32%. LCMS (ESI) calc'd for C25H14ClF3N2O4 [M+H]+: 499.1. found: 499.1. 1HNMR (400 MHz, DMSO) δ 8.544 (1H, s), 8.28 (1H, d), 8.10 (8H, m), 7.70 (1H, d), 4.41 (1H, s).
To a solution of methyl 4-(6-bromo-1-(2-chloro-6-(trifluoromethyl)benzoyl)-1H-indazol-3-yl)-3-fluorobenzoate (T−1) (200 mg, 0.36 mmol) in DMF (10 mL) and TEA (20 mL) was added 2-(prop-2-ynyloxy)-tetrahydro-2H-pyran (60 mg, 0.43 mmol), copper(I) iodide (6.8 mg, 0.036 mmol) and PdCl2(PPh3)2 (25 mg, 0.036 mmol) under argon. The mixture was stirred under argon for 2 hours at 80° C. The mixture was diluted with H2O, and the aqueous layer was extracted with CH2Cl2 (3×50 mL). The combined organics were washed with H2O, brine, dried over Na2SO4, and concentrated. The residue was purified by Prep-TLC (Pentane/EtOAc, 5/1) to afford 111 mg (51%) of the title compound. LCMS (ESI) calc'd for C31H23ClF4N2O5 [M+H]+: 615. found: 615.
To a solution of methyl 4-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-6-(3-(tetrahydro-2H-pyran-2-yloxy)prop-1-ynyl)-1H-indazol-3-yl)-3-fluorobenzoate (T-2) (111 mg, 0.18 mmol) in MeOH/H2O (20/2 mL) was added TsOH (15 mg, 0.09 mmol) at 0° C. The mixture was stirred for 12 hours at room temperature. The mixture was diluted with H2O, and the aqueous layer was extracted with CH2Cl2 (3×80 mL). The combined organics were washed with H2O, brine, dried over Na2SO4, and concentrated. The residue was purified by Prep-TLC (Pentane/EtOAc, 3/1) to give 45 mg (47%) of the title compound. LCMS (ESI) calc'd for C26H15ClF4N2O4 [M+H]+: 531. found: 531.
To a solution of methyl 4-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-6-(3-hydroxyprop-1-ynyl)-1H-indazol-3-yl)-3-fluorobenzoate (T-3) (45 mg, 0.085 mmol) in DCM (20 mL) was added Dess-Martin reagent (108 mg, 0.25 mmol) at 0° C. The mixture was stirred for 12 hours at room temperature. The mixture was diluted with H2O and extracted with CH2Cl2 (3×80 mL). The combined organics were washed with H2O, brine, dried over Na2SO4, and concentrated. The residue was purified by Prep-TLC (Pentane/EtOAc, 3/1) to afford 40 mg (88%) of the title compound. LCMS (ESI) calc'd for C26H13ClF4N2O4 [M+H]+: 529.1. found: 529.1.
To a solution of methyl 4-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-6-(3-oxoprop-1-ynyl)-1H-indazol-3-yl)-3-fluorobenzoate (T-4) (40 mg, 0.076 mmol) in dry THF (5 mL) was added MeMgBr (0.18 mL, 0.53 mmol, 3 M in ether) at −60° C. The mixture was stirred for 2 hours at room temperature, the mixture was quenched with saturated NH4Cl, the aqueous layer was extracted with EtOAc (3×80 mL), and the combined organics were washed with H2O, brine, dried over Na2SO4, and concentrated. The residue was purified by Prep-TLC (Pentane/EtOAc, 3/1) to afford 41 mg (85%) of the title compound. LCMS (ESI) calc'd for C27H17ClF4N2O4 [M+H]+: 545.1. found: 545.1.
To a stirred solution of methyl 4-(1-(2-chloro-6-(trifluoromethyl)benzoyl-6-(3-hydroxybut-1-ynyl)-1H-indazol-3-yl)-3-fluorobenzoate (T-5) (41 mg, 0.075 mmol) was added THF (8.0 mL), H2O (2.0 mL) and LiOH.H2O (32 mg, 0.75 mmol), and the solution was stirred at room temperature overnight. LCMS showed disappearance of starting material. The solution was adjusted to pH 4.0 using 1N HCl and poured into THF (30 mL), and washed with brine (20 mL). The organic layer was dried over Na2SO4, evaporated, and submitted for Prep-HPLC to give 5 mg of product (yield 12%). LCMS (ESI) calc'd for C26H15ClF4N2O4 [M+H]+: 531. found: 531. 1HNMR (400 MHz, DMSO) δ 13.5 (1H, bs), 8.526 (1H, s), 7.95 (6H, m), 7.76 (1H, t), 7.63 (1H, t), 5.61 (1H, d), 4.57 (1H, t), 1.449-1.464 (3H, d).
The mixture of methyl 4-(6-bromo-1-(2-chloro-6-(trifluoromethyl)benzoyl)-1H-indazol-3-yl)-3-fluorobenzoate (U−1) (554 mg, 1.0 mmol), Pd(PPh3)2Cl2 (105 mg, 0.1 mmol), CuI (60 mg, 0.15 mmol), Et3N (20 mL) and DMF (20 mL) was purged with N2 and stirred at 80° C. overnight. LCMS showed that the starting material was completely consumed, and showed formation of the desired product. The resulting solution was filtered, concentrated, and purified by column chromatography to give 432 mg of product as a white solid (68.7%). LCMS (ESI) calc'd for [M+H]+: 629.99. found: 630.1.
To the solution of methyl 4-(6-(3-(tert-butoxycarbonylamino)prop-1-ynyl)-1-(2-chloro-6-(trifluoromethyl)benzoyl)-1H-indazol-3-yl)-3-fluorobenzoate (U-2) (629 mg, 1.0 mmol) in THF (30 mL) and water (10 mL) was added TFA (970 mg, 10 mmol). The mixture solution was stirred at room temperature for 10 h. The mixture was diluted with H2O and extracted with EtOAc (30 mL×3). The combined organic layer was concentrated and purified by chromatography column (EA:PE=1:1) to afford 461 mg of product (yield: 87.5%). LCMS (ESI) calc'd [M+H]+: 529.87. found: 530.1.
To the solution of methyl 4-(6-(3-aminoprop-1-ynyl)-1-(2-chloro-6-(trifluoromethyl)benzoyl)-1H-indazol-3-yl) 3-fluorobenzoate (U-3) (529 mg, 1.0 mmol) in THF (30 mL) and water (10 mL) was added LiOH (240 mg, 10 mmol). The mixture solution was stirred at room temperature for 10 h. The mixture was acidified with 2N HCl and extracted with EtOAc (30 mL×3). The combined organic layer was purified by flash chromatography (EA:PE=1:1) to afford 431 mg of final product (yield: 84%). LCMS (ESI) calc'd [M+H]+: 515.84. found: 516.1. 1HNMR (400 MHz, CDCl3) δ: 8.63 (1H, s), 8.41 (2H, w), 8.02 (3H, m), 7.89 (3H, m), 7.76 (1H, t), 7.68 (1H, s), 4.12 (1H, s).
To a solution of methyl 4-(6-bromo-1-(2-chloro-6-(trifluoromethyl)benzoyl)-1H-indazol-3-yl)benzoate (V−1) (108 mg, 0.2 mmol) in DMF (10 mL) and TEA (20 mL) was added ethynyltrimethylsilane (24 mg, 0.24 mmol), copper(I) iodide (4 mg, 0.02 mmol) and PdCl2(PPh3)2 (14 mg, 0.02 mmol) under argon. The mixture was stirred under argon for 2 hours at 80° C. The mixture was diluted with H2O. The aqueous layer was extracted with CH2Cl2 (3×50 mL). The combined organics were washed with H2O, brine, dried over Na2SO4, and concentrated. The residue was purified by Prep-TLC (Pentane/EtOAc, 5/1) to afford 90 mg (87%) of the title compound. LCMS (ESI) calc'd for C28H22ClF3N2O3Si [M+H]+: 555.1. found: 555.1.
To a solution of methyl 4-(1-(2-chloro-6-(trifluoro methyl)benzoyl)-6-((trimethylsilyl)ethynyl)-1H-indazol-3-yl)benzoate (V-2) (50 mg, 0.09 mmol) in THF (10 mL) at 0° C. was added TBAF (23 mg, 0.09 mmol). The mixture was stirred for 12 hours at room temperature. The mixture was diluted with H2O. The aqueous layer was extracted with CH2Cl2 (3×80 mL). The combined organics were washed with H2O, brine, dried over Na2SO4, and concentrated. The residue was purified by Prep-TLC (Pentane/EtOAc, 5/1) to afford 35 mg (92%) of the title compound. LCMS (ESI) calc'd for C25H14ClF3N2O3 [M+H]+: 483. found: 483.
To a stirred solution of methyl 4-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-6-ethynyl-1H-indazol-3-yl)benzoate (V-3) (170 mg, 0.35 mmol) was added THF (8.0 mL), H2O (2.0 mL) and LiOH.H2O (74 mg, 1.76 mmol), and the solution was stirred at room temperature overnight. The solution was acidified with 1N HCl to pH=4.0, and diluted with THF (30 mL). The organic layer was separated and washed with brine (20 mL). The organic layer was dried over Na2SO4, concentrated, and purified by Prep-HPLC to afford 43 mg of the final product (yield: 26%). LCMS (ESI) calc'd for C25H14ClF3N2O3 [M+H]+: 483.1. found: 483.1. 1HNMR (500 MHz, DMSO) δ 13.36 (1H, bs), 8.56 (1H, s), 8.30 (1H, d), 8.10 (4H, d), 8.05 (3H, m), 7.76 (1H, d), 4.59 (1H, s).
The mixture of 1-(2-chloro-6-(trifluoromethyl)benzoyl)-3-iodo-1H-indazole-6-carboxylic acid (W−1) (0.2 g, 0.4 mmol), N′-hydroxyacetimidamide (59 mg, 0.8 mmol), and HATU (0.3 g, 0.8 mmol) and DIPEA (0.13 mL, 0.80 mmol) in DCM (20 mL) was stirred at room temperature overnight. The reaction mixture was washed with 1M HCl solution, saturated NaHCO3 solution, and brine respectively, dried over anhydrous Na2SO4 and concentrated. The residue was dissolved in 1,4-dioxane (20 mL) and heated at 100° C. overnight. The solvent was removed under reduced pressure, the residue was diluted with H2O (50 mL), and the aqueous layer was extracted with ethyl acetate (50 mL×3). The combined organic layers were washed with brine (50 mL×1), dried over anhydrous Na2SO4, and concentrated. The residue was purified with Prep-TLC (PE:EA=5:2) to obtain the desired product W-2 as a white solid (85 mg, 40%). LCMS (ESI) calc'd for C18H9ClF3IN4O2 [M+H]+: 533. found: 533.
A mixture of (2-chloro-6-(trifluoromethyl)phenyl)(3-iodo-6-(3-methyl-1,2,4-oxadiazol-5-yl)-1H-indazol-1-yl)methanone (W-2) (100 mg, 0.19 mol), W-3 (56 mg, 0.29 mol), Pd(OAc)2 (4 mg, 0.019 mol), s-phos (8 mg, 0.019 mol) and K3PO4 (121 mg, 0.57 mol) was suspended in 1,4-dioxane (5 mL) and H2O (1 mL). The reaction mixture was heated at 100° C. in a microwave reactor for 2 h. The resulting mixture was diluted with H2O (50 mL) and the aqueous layer was extracted with ethyl acetate (50 mL×3). The combined organic layers were washed with brine (50 mL×1), dried over anhydrous Na2SO4, and concentrated to obtain the desired product W-4 as a yellow solid (65 mg, 45%). LCMS (ESI) calc'd for C26H15ClF4N4O4 [M+H]+: 559. found: 559.
A mixture of methyl 4-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-6-(3-methyl-1,2,4-oxadiazol-5-yl)-1H-indazol-3-yl)-3-fluorobenzoate (W-4) (150 mg, 0.27 mmol) and LiOH (57 mg, 1.35 mmol) in THF (4 mL) and H2O (2 mL) was stirred at room temperature for 4 h. The reaction mixture was diluted with H2O (20 mL), and acidified with 2N HCl solution to pH=˜3. The mixture was extracted with ethyl acetate (20 mL×3). The combined organic layers were washed with brine (20 mL×1), dried over anhydrous Na2SO4, and concentrated. The residue was purified with Prep-HPLC to obtain the desired product 15A as a white solid (130 mg, 90%). LCMS (ESI): calc'd for C25H13ClF4N4O4 [M+H]+: 545. found: 545; 1HNMR (400 MHz, MeOD) δ 8.36 (1H, s), 8.34 (1H, d, J=8.4 Hz), 8.17 (1H, d, J=8.4 Hz), 7.97-7.99 (2H, m), 7.89-7.94 (2H, m), 7.81 (1H, d, J=8.4 Hz), 7.73-7.78 (1H, m), 2.54 (3H, s).
1-(2-Chloro-6-trifluoromethyl)benzoyl)-3-(2-fluoro-4-(methoxycarbonyl)phenyl)-1H-indazole-6-carboxylic acid (X-1) (100 mg, 0.2 mmol) was dissolved in CH2Cl2 (15 mL), followed by the addition of prop-2-yn-1-amine (13 mg, 0.24 mmol) and PYAOP (208 mg, 0.4 mmol). The mixture was stirred at room temperature for 2 mins, followed by the addition of TEA (0.16 mL, 1.08 mmol). The mixture was stirred at room temperature for 2 h, diluted with EtOAC (20 mL), washed with brine (20 mL×2), dried over anhydrous Na2SO4, and concentrated to give 85 mg of crude product, which was used in the next step without further purification. LCMS (ESI): calc'd for C27H16ClF4N3O4, [M+H]+: 557.1. found: 557.1.
Methyl-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-6-(prop-2-ynylcarbamoyl)-1H-indazol-3-yl)-3-fluorobenzoate (X-2) (85 mg, 0.15 mmol) was dissolved in AcOH (15 mL), followed by the addition of (diacetoxyiodo)benzene (73 mg, 0.23 mmol). The mixture was stirred at 90° C. for 12 hours. Then the mixture was diluted with EtOAC (20 mL), washed with brine (20 mL×2), dried over anhydrous Na2SO4, and concentrated to obtain the crude product X-3 (60 mg), which was used in the next step without further purification. LCMS (ESI): calc'd for C30H19ClF4N2O6, [M+H]+: 614.1. found: 614.1.
A mixture of methyl 4-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-6-(prop-2-ynyl carbamoyl)-1H-indazol-3-yl)-3-fluorobenzoate (X-3) (25 mg, 0.04 mmol) and LiOH.H2O (10 mg, 0.25 mmol) in 10 mL THF and 10 mL pure H2O was stirred at room temperature for 2 hours. The solvent was evaporated and the residue was dissolved in water. HCl (5% sol. in water) was added until pH 4-5. The precipitated solid was filtered, washed with water and n-hexane, and dried to afford an off-white solid 16A (15 mg, 80%). LCMS (ESI): calc'd for C27H15ClF4N2O5, [M+H]+: 558.1 found: 558.1. 1HNMR (400 MHz, DMSO) δ 9.09 (1H, s), 8.22-8.24 (1H, d, J=8 Hz), 8.11-8.13 (1H, d, J=8 Hz), 8.05-8.07 (1H, d, J=8 Hz), 8.00-8.02 (1H, d, J=8 Hz), 7.88-7.95 (3H, m), 7.77-7.81 (1H, m), 7.35 (1H, s), 4.63 (2H, s).
To the solution of methyl 4-(6-bromo-1-(2-chloro-6-(trifluoromethyl)benzoyl)-1H-indazol-3-yl)-3-fluorobenzoate (Y−1) (161 mg, 0.29 mmol) in dioxane (5 mL) was added Pin2B2 (151 mg, 0.58 mmol), KOAc (115 mg, 1.16 mmol) and (dppf)PdCl2 (21 mg, 0.029 mmol) under N2 protection. The mixture was heated at 90° C. for 6 h. Then the mixture was cooled down and diluted with EtOAc (100 mL), washed with H2O (20 mL×3), brine (20 mL), dried and concentrated. The residue was purified with chromatography (PE:EA=6:1) to afford 125 mg of the final product (yield: 71%). LCMS (ESI) calc'd [M+H]+: 602.0. found: 602.1.
To the solution of methyl 4-(6-bromo-1-(2-chloro-6-(trifluoromethyl)benzoyl)-1H-indazol-3-yl)-3-fluorobenzoate (Y-2) (50 mg, 0.083 mmol) in dioxane (5 mL) was added 4-bromo-1-methyl-1H-imidazole (20 mg, 0.1 mmol), K2CO3 (30 mg, 0.2 mmol) and (PPh3)4Pd (10 mg, 0.0083 mmol) under N2 protection. The mixture was protected by N2 and stirred at 85° C. for 16 h. The solution was cooled down, concentrated, and purified by Prep-HPLC (ACN:H2O) to afford 5 mg of product (yield: 7.2%). LCMS (ESI) calc'd [M+H]+: 557. found: 557.
To the solution of methyl 4-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-6-(1-methyl-1H-imidazol-4-yl)-1H-indazol-3-yl)-3-fluorobenzoate (Y-3) (5 mg, 0.009 mmol) in THF (2 mL) and H2O (0.5 mL) was added LiOH (1 mg, 0.045 mmol). The mixture solution was stirred at room temperature for 16 h, acidified by HCl (2N), and extracted with EtOAc (10 mL×3). The organic layer was dried, concentrated, and purified by Prep-HPLC (ACN:H2O) to afford 5 mg of final product (yield: 100%). LCMS (ESI) calc'd [M+H]+: 543. found: 543.
A mixture of 1-(2-chloro-6-(trifluoromethyl)benzoyl)-3-(2-fluoro-4-(methoxycarbonyl)phenyl)-1H-indazole-6-carboxylic acid (Z−1) (286 mg, 0.55 mmol) and (COCl)2 (0.14 mL, 1.65 mmol) in DCM (5 mL) and DMF (2 drops) was stirred at room temperature for 1 h. The solvent was removed and the residue was dissolved in anhydrous toluene (5 mL). The resulting solution was added to a mixture of 2-bromoethanamine (86 mg, 0.7 mmol) and Et3N (167 mg, 1.65 mmol) in anhydrous toluene (5 mL). The reaction mixture was stirred at 85° C. for 3 hours. The solvent was evaporated and the residue was purified by flash chromatography (PE:DCM=1:10) to give the desired product Z-2. LCMS (ESI) calc'd for C26H16ClF4N3O4 [M+H]+: 546. found: 546.
A mixture of methyl 4-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-6-(4,5-dihydrooxazol-2-yl)-1H-indazol-3-yl)-3-fluorobenzoate (Z-2) (300 mg, 0.55 mmol), AIBN (9 mg, 0.055 mmol) and NBS (587 mg, 3.3 mmol) in CCl4 (15 mL) under argon was made, and the reaction mixture was refluxed for 12 hours. The solvent was evaporated and the residue was purified by column chromatography on silica gel eluting with (PE:DCM=1:4) to afford two products:
Z-3. (200 mg, 66%). LCMS (ESI) calc'd for C26H14ClF4N3O4 [M+H]+: 544. found: 544.
Z-4. LCMS (ESI) calc'd for C26H13BrClF4N3O [M+H]+: 622. found: 622.
A mixture of methyl 4-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-6-(oxazol-2-yl)-1H-indazol-3-yl)-3-fluorobenzoate (Z-3) (38 mg, 0.07 mmol) and LiOH.H2O (16 mg, 0.37 mmol) in 10 mL THF and 10 mL pure H2O was stirred at room temperature for 2 hours. The solvent was evaporated and the residue was dissolved in water. HCl (5% sol. in water) was added until pH=4-5. The precipitated solid was filtered, washed with water (10 mL) and n-hexane (10 mL), and dried to afford an off-white solid 18A (32 mg, 93%). LCMS (ESI): calc'd for C25H12ClF4N3O4, [M+H]+: 530 found: 530; 1HNMR (400 MHz, DMSO) δ 13.57 (1H, s), 9.12 (1H, s), 8.40 (1H, s), 8.24-8.26 (1H, d, J=8 Hz), 8.12-8.14 (1H, d, J=8 Hz), 8.00-8.07 (2H, m), 7.88-7.95 (3H, m), 7.78-7.81 (1H, m), 7.55 (1H, s).
By following the same method as for the synthesis of compound 18A, but starting from Z-4, the desired product 18B was prepared. LCMS (ESI): calc'd for C25H11BrClF4N3O4, [M+H]+: 608 found: 608; 1HNMR (400 MHz, DMSO) δ 13.57 (1H, s), 9.05 (1H, s), 8.19-8.21 (1H, d, J=8 Hz), 8.12-8.14 (1H, d, J=8 Hz), 8.05-8.06 (1H, d, J=4 Hz), 8.00-8.02 (1H, d, J=8 Hz), 7.93-7.95 (1H, d, J=8 Hz), 7.86-7.88 (2H, m), 7.77-7.80 (1H, m), 7.61 (1H, s).
The mixture of 1-(2-chloro-6-(trifluoromethyl)benzoyl)-3-(2-fluoro-4-(methoxycarbonyl)phenyl)-1H-indazole-6-carboxylic acid (AA-1) (250 mg, 0.48 mmol), dimethylamine (2.0 M solution in THF, 0.36 mL, 0.72 mmol), HATU (220 mg, 0.58 mmol) and Et3N (0.13 mL, 0.96 mmol) in DCM (10 mL) was stirred at room temperature for 1 h. The solvent was removed under reduced pressure and the residue was chromatographed on silica gel (PE:EA 1:1) to obtain the desired product as a white solid (200 mg, 86%). LCMS (ESI) calc'd for C26H18ClF4N3O4 [M+H]+: 548. found: 548.
The mixture of methyl 4-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-6-(dimethylcarbamoyl)-1H-indazol-3-yl)-3-fluorobenzoate (AA-2) (240 mg, 0.44 mmol) and Lawesson Reagent (360 mg, 0.88 mmol) in toluene (10 mL) was stirred at 100° C. for 4 h. The solvent was removed under reduced pressure and the residue was chromatographed on silica gel (PE:EA 5:1) to obtain the desired product as a yellow solid (180 mg, 70%). LCMS (ESI) calc'd for C26H18ClF4N3O3S [M+H]+: 564. found: 564.
The mixture of methyl 4-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-6-(dimethylcarbamothioyl)-1H-indazol-3-yl)-3-fluorobenzoate (AA-3) (145 mg, 0.26 mmol) and triethyloxonium tetrafluoroborate (1.0 M solution in DCM, 0.31 mL, 0.31 mmol) in DCE (6 mL) was stirred at 85° C. overnight. The solvent was removed under reduced pressure to obtain the crude product as a yellow solid. The crude product was used in the next step without further purification. LCMS (ESI) calc'd for C28H23BClF8N3O3S [M+H]+: 592. found: 592.
The mixture of methyl 4-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-6-((dimethyl amino)(ethylthio)methyl)-1H-indazol-3-yl)-3-fluorobenzoate (AA-4) (150 mg, 0.26 mmol), cyanamide (37 mg, 0.88 mmol) and Et3N (44 mg, 0.44 mmol) in MeOH (5 mL) was stirred at room temperature for 2 h. The resulting solution was diluted with water (30 mL) and the aqueous layer was extracted with EtOAc (20 mL×3). The combined organic layers were washed with 1N HCl solution (20 mL×1) then brine (20 mL×1), dried over anhydrous Na2SO4 and concentrated to obtain the desired crude product AA-5 (160 mg) as a yellow solid. LCMS (ESI) calc'd for C27H18ClF4N5O3 [M+H]+: 572. found: 572.
The mixture of (E)-methyl 4-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-6-(N′-cyano-N, N-dimethylcarbamimidoyl)-1H-indazol-3-yl)-3-fluorobenzoate (AA-5) (100 mg, 0.18 mmol) and LiOH (30 mg, 0.72 mmol) in THF (4 mL) and H2O (2 mL) was stirred at room temperature for 3 h. The reaction mixture was diluted with H2O (20 mL). 2 M HCl solution was added to adjust the pH to 3 and the aqueous layer was extracted with ethyl acetate (20 mL×3). The combined organic layers were washed with brine (20 mL×1), dried over anhydrous Na2SO4 and concentrated. The residue was purified with Prep-HPLC (acetonitrile-water system) to obtain the desired product 6 as a white solid (50 mg, 50%). LCMS (ESI) calc'd for C26H16ClF4N5O3 [M+H]+: 558. found: 558; 1HNMR (400 MHz, MeOD) δ 8.68 (1H, s), 8.15-8.18 (1H, m), 7.93-7.98 (2H, m), 7.87-7.91 (2H, m), 7.77-7.81 (1H, m), 7.72-7.76 (1H, m), 7.61 (1H, d, J=8.4 Hz), 3.37 (3H, s), 3.09 (3H, s).
To a stirred solution of methyl 3-iodo-1H-indazole 6-carboxylate (AB-1) (2 g, 6.62 mmol) in anhydrous DCM (60 mL) at room temperature was added 2-chloro-6-(trifluoromethyl)benzoyl chloride (2.4 g, 9.93 mmol), DMAP (161 mg, 1.32 mmol), and Et3N (1.47 mg, 14.57 mmol). The solution was stirred at room temperature overnight. The solution was diluted with EtOAc (50 mL), filtered through celite and washed with DCM (40 mL). The combined organic layer was washed with H2O (20 mL), brine (20 mL) and dried over anhydrous Na2SO4. The solution was evaporated with silica gel and loaded on a column. SGC (DCM) afforded 3.25 g product. Yield 98.5%. LCMS (ESI) calc'd for C17H9ClF3IN2O3 [M+H]+: 509. found: 509.
To a stirred solution of methyl1-(2-chloro-6-(trifluoro methyl)benzoyl)-3-iodo-1H-indazole-6-carboxylate (AB-2) (1000 mg, 1.97 mmol) in ethanol (40 mL) was added NH2NH2H2O (0.31 ml, 9.83 mmol). The solution was stirred at reflux temperature overnight. LCMS showed complete transformation to the product. The solution was diluted with H2O (100 mL), and extracted with EtOAc (3×60 mL). The combined organic layer was washed with H2O (2×20 mL), brine (30 mL) and dried over anhydrous Na2SO4. The solution was evaporated with silica gel and loaded on a column. Prep-TLC (DCM) afforded 176 mg product. Yield 18%. LCMS (ESI) calc'd for C16H9ClF3IN4O2 [M+H]+: 509. found: 509.
To a stirred solution of 1-(2-chloro-6-(trifluoromethyl)benzoyl)-3-iodo-1H-indazole-6-carbohydrazide (AB-3) (100 mg, 0.196 mmol) in THF (2 mL) was added CDI (48 mg, 0.294 mmol) and Et3N (30 mg, 0.294 mmol). The solution was stirred at room temperature overnight. The solution was diluted with H2O (30 mL) and extracted with EtOAc (2×30 mL), and the organic layer was washed with H2O (30 mL) and brine (30 mL) and dried over anhydrous Na2SO4. The organic layer was evaporated with silica gel and loaded on a silica gel column. SGC (PE/EA: 2/1) gave 60 mg product, yield 57%. LCMS (ESI) calc'd for C17H7ClF3IN4O3 [M+H]+: 535. found: 535.
To a microwave tube was added 5-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-3-iodo-1H-indazol-6-yl)-1,3,4-oxadiazol-2(3H)-one (AB-4) (60 mg, 0.11 mmol), methyl 3-fluoro 4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzoate (44 mg, 0.22 mmol), Pd(OAc)2 (trimer) (1.23 mg, 0.01 mmol), s-Phos (4.4 mg, 0.01 mmol), K3PO4 (80 mg, 0.33 mmol), THF (1.5 mL), H2O (0.3 mL). The solution was microwaved under argon at 110° C. for 2 hours. LCMS showed major product peak. The upper solution was filtered and used in the next step without further purification. LCMS (ESI) calc'd for C25H13ClF4N4O5[M+H]+: 560. found: 560.
To a stirred solution of methyl4-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-6-(5-oxo-4,5-dihydro-1,3,4-oxadiazol-2-yl)-1H-indazol-3-yl)-3-fluorobenzoate (AB-5) (as generated in step 4) was added LiOH.H2O (10 mg, 0.4 mmol) and H2O (0.1 mL). The solution was stirred overnight and LCMS showed major product peak. The solution was adjusted to PH=3.0 using 1 N HCl. The upper organic layer was collected and the aqueous layer was extracted with THF (3×1 mL). To the combined organic layer was added 0.5 mL MeOH, submitting for Prep-HPLC (H2O/ACN, 0.05% TFA) gave 15 mg product, and the yield for two steps was 25%. LCMS (ESI) calc'd for C24H11ClF4N4O5 [M+H]+: 547. found: 547. 1HNMR (400 MHz, DMSO) δ 13.60 (1H, s), 13.00 (1H, s), 8.87 (1H, s), 8.15-8.07 (1H, m), 8.06-8.03 (3H, m), 8.02-8.00 (3H, m), 7.79-7.76 (1H, m).
The mixture of 1-(2-chloro-6-(trifluoromethyl)benzoyl)-3-(2-fluoro-4-(methoxycarbonyl)phenyl)-1H-indazole-6-carboxylic acid (AC-1) (95 mg, 0.18 mmol), ammonium chloride (14.3 mg, 0.27 mmol), HATU (82 mg, 0.22 mmol) and Et3N (76 uL, 0.54 mmol) in DCM (5 mL) was stirred at room temperature for 1 h. The solvent was removed under reduced pressure and the residue was chromatographed on silica gel (PE:EA 1:1) to obtain the desired product as a white solid (60 mg, 68%). LCMS (ESI) calc'd for C24H14ClF4N3O4 [M+H]+: 520. found: 520.
The mixture of methyl 4-(6-carbamoyl-1-(2-chloro-6-(trifluoromethyl)benzoyl)-1H-indazol-3-yl)-3-fluorobenzoate (AC-2) (80 mg, 0.15 mmol) and dimethoxy-N,N-dimethylmethanamine (92 mg, 0.75 mmol) in EtOAc (5 mL) was stirred at 60° C. overnight. The solvent was removed under reduced pressure to obtain the crude product as a white solid. The crude product was used in the next step without further purification. LCMS (ESI) calc'd for C27H19ClF4N4O4 [M+H]+: 575. found: 575.
The mixture of (E)-methyl 4-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-6-((dimethylamino)methylene carbamoyl)-1H-indazol-3-yl)-3-fluorobenzoate (AC-3) (100 mg, 0.17 mmol) and hydrazine (27 mg, 0.85 mmol) in AcOH (5 mL) was stirred at room temperature for 2 h. The resulting solution was diluted with water (30 mL). NaHCO3 solid was added to adjust the pH to 8 and the aqueous layer was extracted with EtOAc (20 mL×3). The combined organic layers were washed with brine (20 mL×1), dried over anhydrous Na2SO4 and concentrated to obtain the desired product as a white solid (50 mg, 50%). LCMS (ESI) calc'd for C25H14ClF4N5O3 [M+H]+: 544. found: 544.
The mixture of methyl 4-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-6-(4H-1,2,4-triazol-3-yl)-1H-indazol-3-yl)-3-fluorobenzoate (AC-4) (100 mg, 0.18 mmol) and LiOH (38 mg, 0.90 mmol) in THF (4 mL) and H2O (2 mL) was stirred at 30° C. for 1 h. The reaction mixture was diluted with H2O (20 mL). 2M HCl solution was added to adjust the pH to 3 and the aqueous layer was extracted with ethyl acetate (20 mL×3). The combined organic layers were washed with brine (20 mL×1), dried over anhydrous Na2SO4 and concentrated. The residue was purified with Prep-HPLC (acetonitrile-water system) to obtain the desired product 21A as a white solid (95 mg, 96%). LCMS (ESI) calc'd for C24H12ClF4N5O3 [M+H]+: 530. found: 530. 1HNMR (400 MHz, MeOD) δ 9.32 (1H, s), 8.56 (1H, s), 8.30 (1H, d, J=8.4 Hz), 8.02-8.05 (1H, m), 7.92-7.97 (2H, m), 7.86-7.90 (2H, m), 7.72-7.80 (2H, m).
The following examples shown in TABLE 10 were prepared following similar procedures described for Example 21A in Scheme AC, which can be achieved by those of ordinary skill in the art of organic synthesis in light of the present disclosure.
To a 1 dram vial was added methyl 4-(1-(2-chloro-6-trifluorobenzoyl)-6-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-1H-indazol-3-yl)benzoate (AD-1) (20 mg, 0.034 mmol), 2-bromothiazole (AD-2) (0.051 mmol), potassium carbonate (0.093 mL, 2M), dichloro 1-1′-bis(diphenylphosphino)ferrocine palladium (II) dichloromethane adduct (5.59 mg, 6.84 umol), and 1,4-dioxane (1 mL). The vessel was flushed with argon and stirred overnight at 90° C. The reactions were concentrated under reduced pressure. The remaining residue was dissolved in a 1:1 DCM/Methanol solution (1 mL) and SiliaBond DMT Resin (78 mg, 0.045 mmol) was then added. The mixture was stirred overnight at room temperature. The mixture was then filtered and concentrated under reduced pressure. Lithium hydroxide (1M, 0.186 mL), methanol (0.25 mL), and THF (0.5 mL) was then added and the reaction was stirred overnight at room temperature. The reactions were concentrated under reduced pressure. The reaction was then diluted with 1.0 mL DMSO, filtered, and purified by mass-triggered reverse phase HPLC, eluting with a 1% trifluoroacetic acid buffered water/acetonitrile gradient over a Waters X-Bridge C-18 column, to afford desired product (5 mg, 18% over two steps). LCMS (ESI) calc'd for C24H13ClFN3O3S [M+H]+: 478. found: 478.
The following examples shown in TABLE 11 were prepared following similar procedures described for Example 22A in Scheme AD, which can be achieved by those of ordinary skill in the art of organic synthesis in light of the present disclosure.
To a 1 dram vial was added methyl 4-(6-bromo-1-(2-chloro-6-trifluorobenzoyl)-1H-indazol-3-yl)benzoate (i-9) (20 mg, 0.037 mmol), pyridin-3-ylboronic acid (6.9 mg, 0.056 mmol), potassium carbonate (2 M, 0.093 mL, 0.186 mmol), dichloro 1-1′-bis(diphenylphosphino)ferrocine palladium(II) dichloromethane adduct (6.07 mg, 7.44 umol), and 1,4-dioxane (1 mL). The vessel was flushed with argon and stirred overnight at 90° C. The reactions were concentrated under reduced pressure. The remaining residue was dissolved in a 1:1 DCM/Methanol solution (1 mL) and SiliaBond DMT Resin (78 mg, 0.045 mmol) was then added. The mixture was stirred overnight at room temperature. The mixture was then filtered and concentrated under reduced pressure. Lithium hydroxide (1M, 0.186 mL), methanol (0.25 mL) and THF (0.5 mL) were then added and the reaction was stirred overnight at room temperature. The reactions were concentrated under reduced pressure. The reaction was then diluted with 1.0 mL DMSO, filtered, and purified by mass-triggered reverse phase HPLC, eluting with a 1% trifluoroacetic acid buffered water/acetonitrile gradient over a Waters X-Bridge C-18 column, to afford the desired product. LCMS (ESI) calc'd for C26H15ClFN3O3 [M+H]+: 472. found: 472. 1H 1H NMR 6 (ppm)(DMSO-d6): 7.66 (1H, t, J=6.33 Hz), 7.85 (1H, t, J=8.15 Hz), 7.99-7.98 (6H, m), 8.08 (2H, d, J=8.17 Hz), 8.37 (2H, d, J=8.35 Hz), 8.71 (1H, d, J=4.84 Hz), 8.78 (1H, s), 9.09 (1H, s)
The following examples shown in TABLE 12 were prepared following similar procedures described for Example 23A in Scheme AE, which can be achieved by those of ordinary skill in the art of organic synthesis in light of the present disclosure.
A mixture of i-8 (300 mg, 0.61 mmol), 4-(methoxycarbonyl)phenylboronic acid (165 mg, 0.92 mmol), Pd(dppf)Cl2 (50 mg, 0.061 mmol) and KOAc (181 mg, 1.83 mmol) in 10 mL dioxane and 2 mL pure H2O was heated to 95° C. for 2 h under microwave. Then the reaction mixture was diluted with EtOAC (50 mL), washed with brine (50 mL×2), dried over anhydrous Na2SO4, concentrated, and purified by silica gel column (PE/EtOAc=20/1) to obtain a white solid (180 mg; 59%). LCMS (ESI): calc'd for C24H14ClF3N2O5, [M+H]+: 503.1. found: 503.1
The compound AH-1 (100 mg, 0.2 mmol) was dissolved in CH2Cl2 (15 mL). NH4Cl (13 mg, 0.24 mmol). PYAOP (208 mg, 0.4 mmol) was added and the mixture was stirred at room temperature for 2 min. TEA (0.16 mL, 1.08 mmol) was added and the mixture was stirred at room temperature for 2 h. Then the reaction mixture was diluted with EtOAC (20 mL), washed with brine (20 mL×2), dried over anhydrous Na2SO4, and concentrated to obtain a white solid AH-2 (90 mg; 90%). LCMS (ESI): calc'd for C24H15ClF3N3O4, [M+H]+: 502. found: 502.
The compound AH-2 (90 mg, 0.18 mmol) was dissolved in anhydrous THF (20 mL) under argon, BH3.THF (0.9 mL, 0.9 mmol) was added, and the mixture was refluxed for 12 h. MeOH was added to quench the excess BH3. The mixture was evaporated and a white solid (75 mg) was obtained. LCMS (ESI): calc'd for C24H17ClF3N3O3, [M+H]+: 488.1. found: 488.1.
To a 50 mL round-bottomed flask was added compound AH-3 (100 mg, 0.2 mmol), methanesulfonyl chloride (23 mg, 0.2 mmol) and CH2Cl2 (10 mL). After stirring at room temperature for 3 min, TEA (0.1 mL, 0.6 mmol) was added slowly. The reaction mixture was stirred at room temperature overnight. Then the mixture was poured into 30 mL water, and the lower (organic) and upper (aqueous) phases were separated. The aqueous phase was extracted CH2Cl2 (20 mL×2). The combined organic phases were washed successively with water (20 mL×2) and 10 mL of brine. The organic phase was dried over anhydrous sodium sulfate, filtered and concentrated at reduced pressure to give a solid (22 mg). LCMS (ESI): calc'd for C25H19ClF3N3O5S [M+H]+: 566.1. found: 566.1.
A mixture of methyl 4-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-6-(methylsulfonamidomethyl)-1H-indazol-3-yl)benzoate (AH-4) (22 mg, 0.04 mmol) and LiOH.H2O (8 mg, 0.19 mmol) in 10 mL THF and 10 mL pure H2O was stirred at room temperature for 2 h. The solvent was evaporated and the residue was dissolved in water. HCl (5% sol in water) was added until the pH was 4-5. The precipitated solid was filtered, washed with water and n-hexane, and dried to afford an off-white solid 15 mg (80%). LCMS (ESI): calc'd for C24H17ClF3N3O5S, [M+H]+: 552.1 found: 552.1; 1HNMR (400 MHz, DMSO-d6) δ 8.59 (s, 1H), 8.23-8.25 (d, 1H, J=8 Hz), 8.09-8.11 (d, 2H, J=8 Hz), 8.04-8.06 (d, 1H, J=8 Hz), 7.99-8.01 (d, 1H, J=8 Hz), 7.94-7.96 (d, 2H, J=8 Hz), 7.86-7.90 (m, 2H), 7.64-7.66 (d, 1H, J=8 Hz), 4.46-4.48 (d, 2H, J=8 Hz), 2.99 (s, 3H).
To a stirred solution of 1-(2-chloro-6-(trifluoromethyl)benzoyl)-3-iodo-1H-indazole-6-carboxylic acid (i-8) (2.00 g, 4.0 mmol) in THF (60 mL) was added BH3.THF (20 mL, 20 mmol). The solution was refluxed overnight. The solution was evaporated and 2.5 g of solid were obtained, for use in the step without further purification. LCMS (ESI) calc'd for C16H9ClF3IN2O2 [M+H]+: 480.7. found: 480.9.
To a stirred solution of (2-chloro-6-(trifluoromethyl)phenyl)(6-(hydroxymethyl)-3-iodo-1H-indazol-1-yl)methanone (AI-1) (2.5 g, 0.52 mmol) in DCM (160 mL) was added Dess-Martin Periodinane (3.7 g, 0.78 mmol). The solution was stirred for 1 h. The mixture was filtered, and the filtrate was washed with H2O (100 mL) and brine (100 mL) and dried over Na2SO4. The solvent was then evaporated and purified with column chromatography (EtOAc/Hexanes=1/10) to give 1.2 g of product. Yield for two steps 60%. LCMS (ESI) calc'd for C16H7ClF3IN2O2 [M+H]+: 478.7. found: 479.0.
To a microwave tube was added 1-(2-chloro-6-(trifluoromethyl)benzoyl)-3-iodo-1H-indazole-6-carbaldehyde (AI-2) (400 mg, 0.83 mmol), 2-fluoro-4-(methoxycarbonyl)phenylboronic acid (AI-3) (320 mg, 1.66 mmol), Pd(OAc)2 trimer (28 mg, 0.125 mmol), K3PO4 (600 mg, 2.5 mmol), s-Phos (100 mg, 0.25 mmol), THF (8 mL), H2O (2 mL). The mixture was microwaved at 110° C. for 2 hours and the compound was submitted for Prep-HPLC. 178 mg product was obtained with a yield of 40%. LCMS (ESI) calc'd for C24H13ClF4N2O4 [M+H]+: 505. found: 505.
To a microwave tube was added methyl 4-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-6-formyl-1H-indazol-3-yl)-3-fluorobenzoate (AI-4) (100 mg, 0.20 mmol), NaCN (19.6 mg, 0.40 mmol), (NH4)2CO3 (76.8 mg, 0.8 mmol), ethanol (0.8 mL) and H2O (0.8 mL). The mixture was microwaved under argon at 110° C. for 2 hours. The mixture was filtered and the obtained product was used in the next step without further purification. LCMS (ESI) calc'd for C26H15ClF4N4O5[M+H]+: 575. found: 575.
To a stirred solution of the above-made methyl 4-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-6-(2,5-dioxoimidazolidin-4-yl)-1H-indazol-3-yl)-3-fluorobenzoate (AI-5) was added LiOH.H2O (60 mg, 1.5 mmol) and H2O (0.1 mL). The solution was stirred overnight. The solution was adjusted to PH=3.0 using 1 N HCl. The reaction mixture was extracted with THF (1 mL×3). To the combined organic layer was added 0.5 mL MeOH, submitting to Prep-HPLC (H2O/ACN, 0.05% TFA) gave 5 mg of product, and the yield for two steps was 4.5%. LCMS (ESI) calc'd for C25H13ClF4N4O5 [M+H]+: 561. found: 561; 1HNMR (400 MHz, DMSO-d6) δ 13.60 (s, 1H), 10.99 (s, 1H), 8.68 (s, 1H), 8.66 (s, 1H), 8.56-7.98 (m, 3H), 7.93-7.88 (m, 3H), 7.84-7.75 (d, 1H), 7.73-7.60 (d, 1H).
To a stirred solution of 5-chloro-1H-pyrrolo[2,3-c]pyridine (AJ-1) (2.0 g, 13.3 mmol) in anhydrous DMF (80 mL) at room temperature was added Br2 (0.68 mL, 13.3 mmol) dropwise. The solution was stirred at room temperature for one hour. The solution was quenched with 10% Na2S2O3 solution (100 mL) and diluted with H2O (400 mL). The aqueous layer was extracted with EtOAc (100 mL×4) and combined organic layer was washed with H2O (50 mL×3) and brine (50 mL×3) and dried over anhydrous Na2SO4. The solution was evaporated and dried over vacuo and 2.9 g product (95%) was collected. LCMS (ESI) calc'd for C7H4BrClN2[M+H]+: 231. found: 231.
To a stirred solution of 3-bromo-5-chloro-1H-pyrrolo[2,3-c]pyridine (AJ-2) (2.9 g, 12.6 mmol) in anhydrous DMF (100 mL) was added 2-chloro-6-(trifluoromethyl)benzoyl chloride (4.6 g, 18.9 mmol) and NaH (60%) (1 g, 25.2 mmol). The solution was stirred at room temperature for 2 hours. The solution was quenched with H2O (400 mL). The suspension was extracted with EtOAc (150 mL×3). The combined organic layer was washed with H2O (100 mL×2) and brine (100 mL×2) and dried over anhydrous Na2SO4. The solution was evaporated and dried over vacuo and 5.7 g product was obtained. LCMS (ESI) calc'd for C15H6BrCl2F3N2O [M+H]+: 437. found: 437.
To a microwave tube was added (3-bromo-5-chloro-1H-pyrrolo[2,3-c]pyridin-1-yl)(2-chloro-6-(trifluoromethyl)phenyl)-methanone (AJ-3) (650 mg, 1.5 mmol), 2-fluoro-4-(methoxycarbonyl)phenylboronic acid (450 mg, 2.25 mmol), Pd(dppf)Cl2 (73 mg, 0.10 mmol), KOAc (300 mg, 3.0 mmol) and dioxane (12 mL). The mixture was microwaved at 110° C. for three hours and filtered through celite. The solvent was evaporated, and the crude product was purified with column chromatography (DCM/Hexanes: 1/1) to give 450 mg product (yield 60%). LCMS (ESI) calc'd for C23H12Cl2F4N2O3 [M+H]+: 511. found: 511.
To a microwave tube was added 4-(5-chloro-1-(2-chloro-6-(trifluoromethyl)benzoyl)-1H-pyrrolo[2,3-c]pyridin-3-yl)-3-fluorobenzoic acid (AJ-4) (50 mg, 0.1 mmol), BocNH2 (35 mg, 0.3 mmol), NaOH (20 mg, 0.5 mmol), Pd(OAc)2 (4 mg, 0.02 mmol), xant-Phos (20 mg, 0.04 mmol), dioxane (1 mL) and H2O (0.05 mL). The mixture was microwaved at 90° C. for 1 hr. After filtration and evaporation, the crude product was submitted for prep-HPLC purification, which gave 5 mg of the title product (yield 17%). LCMS (ESI) calc'd for C27H20ClF4N3O5 [M+H]+: 578. found: 578; 1HNMR (400 MHz, DMSO-d6) δ 13.40 (bs, 1H), 10.00 (s, 1H), 9.37 (s, 1H), 8.02-8.09 (m, 3H), 7.88-7.93 (m, 3H), 7.81-7.84 (d, 1H), 7.70-7.74 (m, 1H), 1.48 (s, 9H).
To a mixture of 3-bromo-1-(2-chloro-6-(trifluoromethyl)benzoyl)-1H-pyrazolo[4,3-b]pyridine-6-carboxylic acid (AK-1) (224 mg, 0.5 mmol), boric acid (128 mg, 0.60 mmol), PdCl2(dppf)2 (48 mg, 0.05 mmol) and KF (90 mg, 1.5 mmol) was added dioxane (25 mL) and H2O (0.5 mL), and the mixture was heated at 90° C. under argon for 16 h. The mixture was cooled down, and diluted with CH2Cl2 (80 mL). The organic layer was separated, washed with brine, dried over Na2SO4, and concentrated. The residue was purified by Prep-TLC (EtOAc) to afford 220 mg (85%) of the title compound as a white solid. LCMS (ESI) calc'd for C23H12ClF4N3O5 [M+H]+: 522.1. found: 522.1.
To a mixture of 1-(2-chloro-6-(trifluoromethyl)benzoyl)-3-(2-fluoro-4-(methoxycarbonyl)phenyl)-1H-pyrazolo[4,3-b]pyridine-6-carboxylic acid (AK-2) (50 mg, 0.1 mmol), DPPA (41 mg, 0.15 mmol), DIPEA (38 mg, 0.3 mmol) and t-BuOH (10 mL) was heated at 90° C. under argon for 16 h. The mixture was cooled down, and diluted with CH2Cl2 (80 mL). The organic layer was separated, washed with brine, dried over Na2SO4, and concentrated. The residue was purified by Prep-TLC (EtOAc) to afford 38 mg (64%) of the title compound as a white solid. LCMS (ESI) calc'd for C27H21ClF4N405 [M+H]+: 593.1. found: 593.1.
To a stirred solution of methyl 4-(6-(tert-butoxycarbonylamino)-1-(2-chloro-6-(trifluoromethyl)benzoyl)-1H-pyrazolo[4,3-b]pyridin-3-yl)-3-fluorobenzoate (AK-3) (80 mg, 0.14 mmol) was added THF (5.0 mL), H2O (1.0 mL) and LiOH.H2O (57 mg, 1.4 mmol) and the solution was stirred at room temperature overnight. The solution was adjusted to PH=4.0 using 1N HCl, poured into THF (30 mL), and washed with brine (20 mL). The organic layer was dried over Na2SO4 and the solvent was evaporated. Submitting the residue for Prep-HPLC resulted in 60 mg of the title product, Yield: 73%. LCMS (ESI) calc'd for C26H19ClF4N4O5 [M+H]+: 579.1. found: 579.1; 1HNMR (500 MHz, DMSO-d6) δ 13.75 (bs, 1H), 10.35 (s, 1H), 9.25 (s, 1H), 8.81-8.81 (d, 1H), 8.34 (t, 1H), 7.98 (m, 5H), 1.55 (s, 9H).
To a solution of methyl 4-(6-(tert-butoxycarbonylamino)-1-(2-chloro-6-(trifluoromethyl)benzoyl)-1H-pyrazolo[4,3-b]pyridin-3-yl)-3-fluorobenzoate (AK-3) (300 mg, 0.5 mmol) in DMF (10 mL) was added NaH (81 mg, 2 mmol, 60%) in portions over 5 min, and the mixture was stirred at 0° C. for 1 h. CH3I (108 mg, 0.76 mmol) in THF (1 mL) was added dropwise by syringe, the reaction mixture was stirred at 0° C. for 12 h and quenched with ice-water, and the aqueous layer was extracted with CH2Cl2 (50 mL×3). The combined organics were washed with H2O, brine, dried over Na2SO4, and concentrated. The residue was purified by silica gel column chromatography (Pentane/EtOAc=10/1) to afford 280 mg (91%) of the title compound. LCMS (ESI) calc'd for C28H23ClF4N4O5 [M+H]+: 607. found: 607.
o a stirred solution of methyl 4-(6-(tert-butoxycarbonyl(methyl)amino)-1-(2-chloro-6-(trifluoromethyl)benzoyl)-1H-pyrazolo[4,3-b]pyridin-3-yl)-3-fluorobenzoate (AK-4) (85 mg, 0.14 mmol) was added THF (5.0 mL), H2O (1.0 mL) and LiOH.H2O (57 mg, 1.4 mmol), and the solution was stirred at room temperature overnight. The solution was adjusted to pH=4.0 using 1N HCl, poured into THF (30 mL), and washed with brine (20 mL). The organic layer was dried over Na2SO4 and the organic solvent was evaporated. Submitting the residue for Prep-HPLC resulted in 61 mg of product, Yield: 71%. LCMS (ESI) calc'd for C27H21ClF4N4O5[M+H]+: 593.1. found: 593.1.
To a stirred solution of 4-(6-(tert-butoxycarbonyl(methyl)amino)-1-(2-chloro-6-(trifluoromethyl)benzoyl)-1H-pyrazolo[4,3-b]pyridin-3-yl)-3-fluorobenzoic acid (AK-5) (100 mg, 0.17 mmol) was added THF (5.0 mL), and 6 N HCl (4 mL) and the solution was stirred at room temperature for 4 h. The solution was adjusted to pH=4.0 using 2N NaOH, poured into THF (30 mL), and washed with brine (20 mL). The organic layer was dried over Na2SO4, the organic solvent was evaporated and the residue was purified by prep-HPLC to give 20 mg of the desired product. Yield 25%. LCMS (ESI) calc'd for C22H13ClF4N4O3 [M+H]+: 493.1. found: 493.1; 1HNMR (500 MHz, DMSO-d6) δ 13.74 (bs, 1H), 8.328 (s, 1H), 8.268 (t, 1H), 8.01 (d, 1H), 7.94 (d, 1H), 7.89 (m, 1H), 7.84 (d, 1H), 7.74 (m, 1H), 7.19 (d, 1H), 2.87 (d, 1H).
To a stirred solution of methyl 4-(5-chloro-1-(2-chloro-6-(trifluoromethyl)benzoyl)-1H-pyrrolo[2,3-c]pyridin-3-yl)-3-flu orobenzoate (AL-1) (550 mg, 1.1 mmol) in dioxane (14 mL) and water (0.5 mL) was added BocNH2 (389 mg, 3.3 mmol), Pd(OAc)2 (50 mg, 0.22 mmol), xant-phos (256 mg, 0.44 mmol) and NaOH (222 mg, 5.5 mmol). The mixture was stirred under argon at 90° C. for 1 h in the microwave reactor. The mixture was filtered and evaporated, and MeOH (5 mL) was added. The resultant solution was submitted for Prep-HPLC under 0.01% TFA, 300 mg solid was obtained, yield: 47%. LCMS (ESI) calc'd for C27H20ClF4N3O5 [M+H]+: 578. found: 578.
To a stirred solution of 4-(5-(tert-butoxy carbonylamino)-1-(2-chloro-6-(trifluoromethyl)benzoyl)-1H-pyrrolo[2,3-c]pyridin-3-yl)-3-fluorobenzoic acid (AL-2) (40 mg, 0.07 mmol) in DCM (0.5 mL) was added TFA (0.5 mL), and the solution was stirred under argon at room temperature for 5 h. The mixture was evaporated, and the crude product was used in the next step directly. LCMS (ESI) calc'd for C22H12ClF4N3O3 [M+H]+: 478. found: 478.
To a stirred solution of 4-(5-amino-1-(2-chloro-6-(trifluoromethyl)benzoyl)-1H-pyrrolo[2,3-c]pyridin-3-yl)-3-fluorobenzoic acid (AL-3) (30 mg, 0.06 mmol) in Ac2O (1 mL) was added AcOH (0.2 mL), and the reaction mixture was stirred under argon at 100° C. for 1 h. The solvent was evaporated, then H2O (1 mL) as added, and the mixture was stirred at room temperature for 2 h. The mixture was purified by Prep-HPLC under 0.01% TFA twice to obtain 10 mg of product (yield: 24.5%). LCMS (ESI) calc'd for C24H14ClF4N3O4 [M+H]+: 520. found: 520; 1HNMR (400 MHz, DMSO-d6) δ 13.37 (bs, 1H), 10.78 (s, 1H), 9.43 (s, 1H), 8.43 (s, 1H), 8.04 (dd, 2H), 7.9-37.87 (m, 3H), 7.81 (d, 1H), 7.71 (t, 1H), 2.12 (s, 3H).
To a stirred solution of 4-(5-acetamido-1-(2-chloro-6-(trifluoromethyl)benzoyl)-1H-pyrrolo[2,3-c]pyridin-3-yl)-3-fluorobenzoic acid (AL-2) (100 mg, 0.17 mmol) in anhydrous DMF (5 mL) at room temperature was added NaH (42 mg, 60%, 1 mmol) and then MeI (98 mg, 0.69 mmol). The solution was stirred at room temperature for 3 hours. Ethyl Acetate (200 mL) was added and the solution was washed with brine (70 mL×2). The solution was evaporated and 120 mg of crude product was obtained for use in the next step without further purification. LCMS (ESI) calc'd for C29H24ClF4N3O5 [M+H]+: 606. found: 606.
To a stirred solution of methyl 4-(5-(tert-butoxycarbonyl(methyl)amino)-1-(2-chloro-6-(trifluoromethyl)-benzoyl)-1H-pyrrolo[2,3-c]pyridin-3-yl)-3-fluorobenzoate (AL-4) (120 mg, as generated from step 4) in DCM (4 mL) was added TFA (2 mL) under N2. The solution was stirred at room temperature for 3 hours and evaporated. 70 mg crude product was collected. It was used the next step without further purification. LCMS (ESI) calc'd for C24H16ClF4N3O3 [M+H]+: 506. found: 506.
To a stirred solution of methyl 4-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-5-(methylamino)-1H-pyrrolo[2,3-c]pyridin-3-yl)-3-fluorobenzoate (AL-5) (71 mg, as generated from step 5) in THF (2 mL) was added H2O (2 mL) and LiOH.H2O (58 mg, 1.4 mmol). The solution was stirred at room temperature overnight and adjusted to PH-2 using 1N HCl. The mixture was concentrated and the residue was purified by Prep-HPLC (CH3CN/H2O) to give the title compound. 52 mg product, yield for three steps was 60%. LCMS (ESI) calc'd for C23H14ClF4N3O3 [M+H]+: 492. found: 492.
A mixture of 1-(2-chloro-6-(trifluoromethyl)benzoyl)-3-(2-fluoro-4-(methoxycarbonyl)phenyl)-1H-pyrazolo[4,3-b]pyridine-6-carboxylic acid (313 mg, 0.6 mmol), Et3N (303 mg, 3 mmol) and DPPA (349 mg, 1.2 mmol) in 15 mL of t-BuOH and 2 mL of water was heated to 90° C. for 12 hrs. The reaction mixture was then diluted with EtOAc (50 mL), washed with brine (50 mL*2), dried over anhydrous Na2SO4, and concentrated in vacuo. The crude residue was purified by silica gel column (DCM/MeOH=50/1) to obtain the title compound. LCMS (ESI): calc'd for C22H13ClF4N4O3, [M+H]+: 493. found: 493.
A mixture of methyl 4-(6-amino-1-(2-chloro-6-(trifluoromethyl)benzoyl)-1H-pyrazolo[4,3-b]pyridin-3-yl)-3-fluorobenzoate (AM-1) (148 mg, 0.3 mmol) and NaH (36 mg, 1.5 mmol) in 10 mL of DMF was stirred for 10 mins. Next, 1-bromo-2-methoxyethane (83 mg, 0.6 mmol) was added and the resulting mixture was stirred for 12 h. Then NH4Cl (1 M) was added until pH=9-10, and the mixture was diluted with EtOAc (50 mL), washed with brine (50 mL*2), dried over anhydrous Na2SO4 and concentrated. The residue was purified by silica gel column (DCM/MeOH=40/1) to obtain the title compound. LCMS (ESI): calc'd for C25H19ClF4N4O4, [M+H]+: 551. found: 551.
A mixture of methyl 4-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-6-(2-methoxyethylamino)-1H-pyrazolo[4,3-b]pyridin-3-yl)-3-fluorobenzoate (AM-2) (39 mg, 0.07 mmol) and LiOH.H2O (16 mg, 0.37 mmol) in 10 mL of THF and 10 mL of pure H2O was stirred at room temperature for 2 hrs. The solvent was evaporated and the residue was dissolved in water. HCl (5% sol in water) was added until pH=4-5. The precipitated solid was filtered, washed with water (10 mL) followed by n-hexane (10 mL) and then dried to afford the title compound as a solid. LCMS (ESI): calc'd for C24H17ClF4N4O4, [M+H]+: 537 found: 537; 1HNMR (400 MHz, DMSO) δ 8.42 (1H, s), 8.25-8.29 (1H, m), 8.01 (1H, d, J=8 Hz), 7.96 (1H, d, J=8 Hz), 7.91 (1H, d, J=8 Hz), 7.82-7.86 (1H, m), 7.76 (1H, d, J=12 Hz), 7.70 (1H, d, J=4 Hz), 7.16-7.19 (1H, m), 3.60-3.62 (2H, m), 3.38-3.42 (2H, m), 3.33 (3H, s).
A mixture of 2-methyl-1H-indole (0.4 g, 3.05 mmol) and NBS (0.6 g, 3.36 mmol) in DMF (5 mL) was stirred at room temperature for 1.5 h. The reaction mixture was diluted with water (50 mL) and the aqueous layer was extracted with EA (50 mL×3). The combined organic layers were washed with brine (50 mL×1), dried over anhydrous Na2SO4 and concentrated. The residue was chromatographed on silica gel (PE:EA 5:1) to obtain the title compound as a pale red solid. LCMS (ESI) calc'd for C9H8BrN [M+H]+: 210. found: 210.
mixture of 3-bromo-2-methyl-1H-indole (AN-1) (0.56 g, 2.67 mmol) in DMF (4 mL) was cooled to 0° C. in an ice-water bath and NaH (0.27 g, 6.68 mmol) was added slowly. Then a solution of 2-chloro-6-(trifluoromethyl)benzoyl chloride (0.71 g, 2.94 mmol) in DMF (2 mL) was added dropwise. The reaction mixture was warmed to room temperature and stirred for 14 h. Saturated NH4Cl solution was added to quench the reaction. The aqueous layer was extracted with EA (50 mL×2). The combined organic layers were washed with brine (50 mL×1), dried over anhydrous Na2SO4 and concentrated to obtain the title compound as a brown solid. LCMS (ESI) calc'd for C17H10BrClF3NO [M+H]+: 416. found: 416.
A mixture of (3-bromo-2-methyl-1H-indol-1-yl)(2-chloro-6-(trifluoro methyl)phenyl)methanone (AN-2) (0.15 mg, 0.36 mmol), 2-fluoro-4-(methoxycarbonyl)phenylboronic acid (0.11 g, 0.54 mmol), Pd(PPh3)4 (42 mg, 0.036 mmol) and K2CO3 (0.15 g, 1.08 mmol) was suspended in 1,4-dioxane (5 mL) and H2O (1 mL). The reaction mixture was heated at 120° C. in a microwave reactor for 2 h. The resulting mixture was diluted with H2O (30 mL) and the aqueous layer was extracted with ethyl acetate (30 mL×3). The combined organic layers were washed with brine (20 mL×1), dried over anhydrous Na2SO4 and concentrated to obtain the title compound as brown oil. LCMS (ESI) calc'd for C25H16ClF4NO3 [M+H]+: 490. found: 490.
A mixture of methyl 4-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-2-methyl-1H-indol-3-yl)-3-fluorobenzoate (AN-3) (100 mg, 0.20 mmol) and LiOH (34 mg, 0.80 mmol) in THF (4 mL) and H2O (2 mL) was stirred at room temperature overnight. The reaction mixture was diluted with H2O (20 mL). 2M HCl solution was added to adjust to pH=3 and the aqueous layer was extracted with ethyl acetate (20 mL×3). The combined organic layers were washed with brine (20 mL×1), dried over anhydrous Na2SO4 and concentrated. The residue was purified with prep-HPLC (acetonitrile-water system) to obtain the title compound as white solid. LCMS (ESI) calc'd for C24H14ClF4NO3 [M+H]+: 476. found: 476; 1HNMR (400 MHz, MeOD) δ 7.80-8.62 (6H, m), 7.54-7.64 (1H, m), 7.19-7.44 (2H, m), 6.00-7.42 (1H, m), 2.71 (1H, s), 1.73 (2H, s).
The following example shown in TABLE 13 was prepared following similar procedures described for Example 32A in Scheme AN, which can be achieved by those of ordinary skill in the art of organic synthesis in light of the present disclosure.
(2-chloro-6-cyclopropylphenyl)(3-iodo-1H-pyrazolo[4,3-b]pyridin-1-yl)methanone (200 mg, 0.47 mmol), 4-borono-3,5-difluorobenzoic acid (191 mg, 0.94 mmol), Pd2(dba)3 (132 mg, 0.19 mmol), HP(t-Bu)BF3 (35 mg, 0.12 mmol), KF (164 mg, 2.8 mmol) and DIPEA (182 mg, 1.4 mmol) were mixed in THF (10 ml). The mixture was stirred at 60° C. for 2 h and then stirred at 70° C. for 1 h under microwave. The reaction mixture was next cooled to room temperature, diluted with THF (30 ml) and filtered. The filtrate was concentrated to obtain a residue that was purified by prep-HPLC (solvents: CH3CN/H2O) to afford 20 mg (8%) of the title compound as white solid. LCMS (ESI): calc'd for C23H14ClF2N3O3 [M+H]+: 454. found: 454; 1HNMR (400 MHz, DMSO) δ 9.04-9.02 (1H, d), 8.84-8.82 (1H, d), 7.83-7.80 (1H, m), 7.76-7.74 (2H, d), 7.46-7.42 (1H, t), 7.37-7.35 (1H, d), 7.15-7.13 (1H, d), 1.91-1.86 (1H, m), 0.90-0.81 (2H, m), 0.76-0.70 (1H, m), 0.60-0.55 (1H, m)
The following examples shown in TABLE 14 were prepared following similar procedures described for Example 33A in Scheme AO, which can be achieved by those of ordinary skill in the art of organic synthesis in light of the present disclosure.
To a mixture of (2-chloro-6-cyclobutylphenyl)(3-iodo-1H-pyrazolo[4,3-b]pyridin-1-yl) methanone (50 mg, 0.11 mmol) and Buchwald 2nd Gen. S-Phos precatalyst (10 mg) in 1 mL toluene and 1.0 M of aqueous potassium phosphate (73 mg, 0.34 mmol) at 10° C. was added a solution of ethyl 3,5-difluoro-4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzoate (54 mg, 0.17 mmol) in 0.5 mL toluene over 2 hours. The mixture was stirred at 10° C. for 16 h additional. LCMS showed major product was the desired compound. The reaction mixture was poured into water (20 mL), and extracted with DCM (20 mL) twice. The combined organic layers were dried over anhydrous Na2SO4 and then concentrated in vacuo. The residue was purified by prep-HPLC (60-90% acetonitrile+0.75%0 trifluoroacetic acid in water) to give the title compound (25 mg, 45.4% yield) as a white solid. LCMS (ESI): calc'd for C26H20ClF2N3O3 [M+H]+: 496. found: 496.
A mixture of ethyl 4-(1-(2-chloro-6-cyclobutylbenzoyl)-1H-pyrazolo[4,3-b]pyridin-3-yl)-3,5-difluorobenzoate (AP-1) (25 mg, 0.05 mmol) and LiOH (12 mg, 0.5 mmol) in MeOH (2 mL) and water (1 mL) was stirred at 10° C. for 2 hours, after which LCMS showed the reaction was complete. Then most of the solvent was removed under reduced pressure, and the residue was dissolved in water (10 mL). The aqueous layer was adjusted to pH=5 with 2 M HCl, and extracted with DCM (10 mL×3). The combined organic layers were washed with brine (20 mL), dried over anhydrous Na2SO4, and concentrated in vacuo to give the title compound (15 mg, 61.8% yield) as a white solid. LCMS (ESI): calc'd for C24H16ClF2N3O3 [M+H]+: 468, found: 468; 1H NMR (400 MHz, DMSO-d6) δ 8.93-8.86 (2H, m), 7.85 (1H, dd, J=4.5, 8.5 Hz), 7.74 (2H, d, J=7.8 Hz), 7.58-7.53 (1H, m), 7.48-7.44 (2H, m), 3.59-3.43 (1H, m), 2.27-2.07 (2H, m), 2.00-1.75 (3H, m), 1.69-1.55 (1H, m).
To a vial were added 1-(2-chloro-6-(trifluoromethyl)benzoyl)-3-(2-fluoro-4-(methoxycarbonyl)phenyl)-1H-pyrazolo[4,3-b]pyridine-6-carboxylic acid (75 mg, 0.144 mmol), 3-aminopropan-1-ol (21.59 mg, 0.287 mmol), BOP (95 mg, 0.216 mmol), THF (1437 μl), and finally DIPEA (75 μl, 0.431 mmol). The reaction was then allowed to stir at room temperature for 14 h. The reaction was then concentrated and the residue was purified by flash chromatography (EtOAc/Hexane 5-75%) to give the title compound as a colorless solid. (57 mg, 68%) LCMS (ESI) calc'd for C26H19ClF4N4O5 [M+H]+: 579. found: 579.
To a vial were added methyl 4-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-6-((3-hydroxypropyl)carbamoyl)-1H-pyrazolo[4,3-b]pyridin-3-yl)-3-fluorobenzoate (AQ-1) (55 mg, 0.095 mmol), dimethoxymethane (50.4 μl, 0.570 mmol), CHCl3 (950 μl), and phosphorus pentoxide (53.9 mg, 0.380 mmol), and the reaction was heated to 70° C. for 4 hours. The mixture was then cooled, neutralized with 2N HCl, diluted with EtOAc, washed 2× with aqueous NaHCO3 and 1× with brine. Aqueous layers were back extracted 1× with ethyl acetate, combined organic layers were dried with Na2SO4, filtered and the solvent was evaporated under reduced pressure. The residue was purified by flash chromatography (EtOAc/Hexane 10-100%) to give the title compound as a colorless solid. (30 mg, 53%) LCMS (ESI) calc'd for C27H19ClF4N4O5 [M+H]+: 591. found: 591.
To a vial were added methyl 4-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-6-(1,3-oxazinane-3-carbonyl)-1H-pyrazolo[4,3-b]pyridin-3-yl)-3-fluorobenzoate (AQ-2) (30 mg, 0.051 mmol), THF (254 μl), water (254 μl) and lithium hydroxide (4.86 mg, 0.203 mmol). The reaction was allowed to stir for 1 hour at room temperature, acidified with 2N HCl, and then concentrated in vacuo. The residue was purified by prep-HPLC (Acetonitrile/Water+0.10% TFA 50-100%) to give the title compound as a colorless solid. (20 mg, 68%) LCMS (ESI) calc'd for C26H17ClF4N4O5 [M+H]+: 577. found: 577.
The following example shown in TABLE 15 was prepared following similar procedures described for Example 35A in Scheme AQ, which can be achieved by those of ordinary skill in the art of organic synthesis in light of the present disclosure.
To a 250 mL round-bottomed flask, were added methyl 3-iodo-1H-indazole-6-carboxylate (9.8 g, 38.7 mmol), 2-chloro-6-(trifluoromethyl)benzoyl chloride (10.3 g, 42.6 mmol), DMAP (4.72 g, 38.7 mmol) and CH2Cl2 (100 mL). After stirring at room temperature for 3 min, TEA (11.2 mL, 77 mmol) was added slowly. The reaction mixture was stirred at room temperature overnight, after which LC-MS showed no starting materials remaining. Then the mixture was poured into 30 mL water. The organic phase was separated, and the aqueous phase was extracted twice with 20 mL CH2Cl2. The combined organic extracts were washed successively with two 20 mL portions of water and 10 mL of brine, dried over anhydrous sodium sulfate, filtered and concentrated at reduced pressure to give a yellow solid. The residue was purified by column chromatography on 60 g of silica gel eluting with Petroleum ether/EtOAc from 50/1 to 10/1, to give a fawn solid of the title compound. LCMS (ESI): calc'd for C18H10BrClF3NO3, [M+H]+: 460. found: 460.
A mixture of methyl 3-bromo-1-(2-chloro-6-(trifluoromethyl)benzoyl)-1H-indole-6-carboxylate (AR-1) (14.5 g, 32.48 mmol) and LiOH (3.40 g, 162.40 mmol) in 10 mL THF and 50 mL pure H2O was stirred at room temperature overnight. The solvent was evaporated and the residue was dissolved in water. HCl (5% sol in water) was added until pH 4-5. The precipitated solid was filtered, washed with water and n-hexane, and dried over Na2SO4 to afford an off-white solid of the title compound: calc'd for C17H8ClF3INO3, [M+H]+: 494. found: 494.
A mixture of 1-(2-chloro-6-(trifluoromethyl)benzoyl)-3-iodo-1H-indole-6-carboxylic acid (AR-2) (301 mg, 0.61 mmol), 2-fluoro-4-(methoxycarbonyl)phenylboronic acid (182 mg, 0.92 mmol), Pd(dppf)Cl2 (50 mg, 0.061 mmol) and KOAc (181 mg, 1.83 mmol) in 10 mL dioxane and 2 mL pure H2O was heated to 95° C. for 2 h under microwave. The reaction mixture was then diluted with EtOAc (50 mL), washed with brine (50 mL*2), dried over anhydrous Na2SO4, and concentrated. The residue was purified by silica gel column (Petroleum ether/EtOAc=20/1) to obtain the title compound as a white solid. LCMS (ESI): calc'd for C25H14ClF4NO5, [M+H]+: 520. found: 520
1-(2-chloro-6-(trifluoromethyl)benzoyl)-3-(2-fluoro-4-(methoxycarbonyl)phenyl)-1H-indole-6-carboxylic acid (AR-3) (187 mg, 0.36 mmol) was dissolved in CH2Cl2 (15 mL). Azetidine hydrochloride (40 mg, 0.43 mmol) and PYAOP (374 mg, 0.72 mmol) were added, and the mixture was stirred at room temperature for 2 mins. TEA (0.16 mL, 1.08 mmol) was added and the mixture was stirred at room temperature for 2 h. The reaction mixture was diluted with EtOAc (20 mL), washed with brine (20 mL*2), dried over anhydrous Na2SO4, and concentrated to afford the title compound as white solid. LCMS (ESI): calc'd for C28H19ClF4N2O4, [M+H]+: 559. found: 559.
A mixture of methyl 4-(6-(azetidine-1-carbonyl)-1-(2-chloro-6-(trifluoromethyl)benzoyl)-1H-indol-3-yl)-3-fluorobenzoate (AR-4) (39 mg, 0.07 mmol) and LiOH.H2O (16 mg, 0.37 mmol) in 10 mL THF and 10 mL pure H2O was stirred at room temperature for 2 hrs. The solvent was evaporated and the residue was dissolved in water. HCl (5% sol in water) was added until pH=4-5. The precipitated solid was filtered, washed sequentially with water (10 mL) and n-hexane (10 mL), and dried to afford the title compound as a solid. LCMS (ESI): calc'd for C27H17ClF4N2O4, [M+H]+: 545 found: 545; 1HNMR (400 MHz, DMSO) δ 8.82 (1H, s), 7.96-8.03 (2H, m), 7.83-7.90 (2H, m), 7.72-7.77 (4H, m), 7.56 (1H, s), 4.24-4.27 (4H, m), 2.29-2.34 (2H, m)
The following example shown in TABLE 16 was prepared following similar procedures described for Example 35A in Scheme AR, which can be achieved by those of ordinary skill in the art of organic synthesis in light of the present disclosure.
A mixture of 2-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-3-(2-fluoro-4-(methoxycarbonyl)phenyl)-1H-pyrazolo[4,3-b]pyridin-6-yl)acetic acid (50 mg, 0.09 mmol), NH4Cl (10 mg, 0.19 mmol), HATU (72 mg, 0.19 mmol), and NEt3 (28 mg, 0.28 mmol) in DCM (20 mL) was stirred at room temperature for 10 h. The mixture was extracted with EtOAc and water. The organic phase was washed with brine, dried over Na2SO4, filtered, and concentrated to give the crude title compound. LCMS (ESI) calc'd for C24H15ClF4N4O4 [M+H]+: 535.0. found: 535.0.
To a solution of methyl 4-(6-(2-amino-2-oxoethyl)-1-(2-chloro-6-(trifluoro methyl)benzoyl)-1H-pyrazolo[4,3-b]pyridin-3-yl)-3-fluorobenzoate (AS-1) (40 mg, 0.07 mmol) in THF (20 mL) and water (10 mL) was added LiOH.H2O (16 mg, 0.35 mmol) at 0° C. The mixture was stirred at room temperature for 12 h. The solvents were removed under reduced pressure. The mixture was acidified with 1 M HCl to pH 1-2 and then extracted with EtOAc, washed with brine, dried over anhydrous Na2SO4, filtered and concentrated under reduced pressure to give the title compound. LCMS (ESI) calc'd for C23H13ClF4N4O4 [M+H]+: 521.0. found: 521.0. 1H NMR (400 MHz, DMSO) δ 8.80 (d, 2H), 8.30 (s, 1H), 7.79-8.02 (m, 5H), 3.80 (s, 2H).
The following examples shown in TABLE 17 were prepared following similar procedures described for Example 37A in Scheme AS, which can be achieved by those of ordinary skill in the art of organic synthesis in light of the present disclosure.
A mixture of methyl 4-(6-bromo-1-(2-chloro-6-(trifluoromethyl)benzoyl)-1H-indazol-3-yl)-3-fluorobenzoate (554 mg, 1.0 mmol), 4,4,4′,4′,5,5,5′,5′-octamethyl-2,2′-bi(1,3,2-dioxaborolane) (763 mg, 3.0 mmol), Pd(dppf)Cl2 (40.9 mg, 0.05 mmol), KOAc (294 mg, 3.0 mmol), and dioxane (30 ml) was degassed, placed under an atmosphere of N2 (g) and stirred at 80° C. for 4 h. Then the solution was filtered, concentrated, and purified by silica gel chromatography (EA:PE=1:4) to afford 425 mg of the title compound (yield: 70.8%). LCMS (ESI) calc'd C29H24BClF4N2O5 [M+H]+: 603. found: 603.
To a solution of methyl 4-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-6-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-1H-indazol-3-yl)-3-fluorobenzoate (AT-1) (602 mg, 1.0 mmol) in THF (15 ml) and H2O (10 ml) was added NH4OAc (154 mg, 2.0 mmol) and NaIO4 (428 mg, 2.0 mmol). The mixture solution was stirred at room temperature for 16 h. Then the solution was concentrated and purified by chromatography column (EA:PE=1:4) to afford 411 mg of the title compound (yield: 79.2%). LCMS (ESI) calc'd C15H6BrClF3IN2O [M+H]+: 521. found: 521.
A mixture of 1-(2-chloro-6-(trifluoromethyl)benzoyl)-3-(2-fluoro-4-(methoxycarbonyl)phenyl)-1H-indazol-6-ylboronic acid (AT-2) (52 mg, 0.1 mmol), NiI2 (3.1 mg, 0.01 mmol), NaHMDS (18.3 mg, 0.1 mmol), (1S,2S)-2-aminocyclohexanol (1.15 mg, 0.01 mmol), 3-iodooxetane (18.4 mg, 0.1 mmol) and iPrOH (2 ml) was placed under an atmosphere of N2 (g) and stirred at 80° C. for 0.5 h in microwave. Then the reaction mixture was filtered, concentrated, and purified by silica gel chromatography (EA:PE=1:10) to afford 9 mg of the title compound (yield: 16.9%). LCMS (ESI) calc'd C26H17ClF4N2O4 [M+H]+: 533. found: 533.
To a solution of methyl 4-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-6-(oxetan-3-yl)-1H-indazol-3-yl)-3-fluorobenzoate (AT-3) (9.0 mg, 0.017 mmol) in THF (10 ml) and H2O (5 ml) was added LiOH (7.14 mg, 1.7 mmol). The mixture solution was stirred at room temperature for 16 h. The reaction mixture was next treated with water (10 ml), acidified by HCl (2M), and extracted with EA (20 ml×3). The combined organic extracts were dried, concentrated, and purified by Prep-HPLC to afford 6.0 mg of the title compound (yield: 68.9%). LCMS (ESI) calc'd C22H12ClF4N3O4 [M+H]+: 519. found: 519. 1HNMR (400 MHz, DMSO) δ 13.58 (1H, s), 8.53 (1H, s), 7.63 (6H, m), 7.75 (2H, m), 5.08 (2H, m), 4.73 (2H, m), 4.58 (1H, m).
To a solution of methyl 3-fluoro-4-(1H-pyrazolo[4,3-b]pyridin-3-yl)benzoate (271 mg, 1 mmol) and TEA (202 mg, 2 mmol) in DCM (10 ml), DMAP (15 mg) and 4-bromo-2-chloro-6-methylbenzoyl chloride (267 mg, 1 mmol) were added. Following stirring for 2 h at room temperature, 100 ml EA was added. The resulting mixture was washed sequentially with H2O (10 ml*2) and brine (20 ml), dried and concentrated in vacuo. The residue was purified by silica gel chromatography (PE: EA=6:1) to afford the title compound 426 mg (yield: 85%). LCMS (ESI) calc'd for C22H14BrClFN3O3 [M+H]+: 502. found: 502.
Methyl 4-(1-(4-bromo-2-chloro-6-methylbenzoyl)-1H-pyrazolo[4,3-b]pyridin-3-yl)-3-fluorobenzoate (AU-1) (100 mg, 0.2 mmol), Pd2(dba)3 (18 mg, 0.02 mmol), tBu-XPhos (34 mg, 0.08 mmol) and KOH (44 mg, 0.8 mmol) were mixed in 5 ml dioxane and 5 ml H2O under N2. After stirring at 100° C. for 2 h, the reaction mixture was cooled to room temperature, acidified with 1N HCl, and poured into 100 ml EA. The resulting mixture was washed sequentially with H2O (20 ml*3) and brine (20 ml), dried and concentrated in vacuo. Silica gel chromatography (PE: EA=3:1) afforded the title compound (68 mg, yield: 80%). LCMS (ESI) calc'd for C21H13ClFN3O4 [M+H]+: 426. found: 426. 1HNMR (400 MHz, DMSO) δ 13.5 (1H, s), 10.35 (1H, s), 8.85˜8.95 (2H, t), 8.32˜8.38 (1H, t), 7.94˜7.99 (1H, d), 7.80˜7.88 (2H, t), 6.73˜6.85 (2H, d), 2.19 (3H, s).
o a solution of 4-(1-(2-chloro-4-hydroxy-6-methylbenzoyl)-1H-pyrazolo[4,3-b]pyridin-3-yl)-3-fluorobenzoic acid (AU-2) (43 mg, 0.1 mmol) in 2 ml of anhydrous DMF, NaH (8 mg, 0.2 mmol) was added. The mixture was stirred for 0.5 h, and then 1-bromo-2-methoxyethane (29 mg, 0.2 mmol) was added. After 3 h, 2 ml H2O was added and the resulting mixture was poured into 100 ml EA, washed sequentially with H2O (10 ml*2) and brine (10 ml), dried and concentrated. The residue was purified with prep-HPLC (ACN: H2O) to give 11 mg (yield: 23%) of the title compound. LCMS (ESI) calc'd for C24H19ClFN3O5 [M+H]+: 484. found: 484. 1HNMR (400 MHz, DMSO) δ 13.5 (1H, s), 8.88˜8.95 (2H, t), 8.32˜8.38 (1H, t), 7.94˜7.99 (1H, t), 7.80˜7.88 (2H, t), 6.96˜7.10 (2H, d), 4.18˜4.23 (2H, t), 3.66˜3.70 (2H, t), 3.32 (3H, s), 2.35 (3H, s).
A mixture of methyl 4-(1-(4-bromo-2-chloro-6-methylbenzoyl)-1H-pyrazolo[4,3-b]pyridin-3-yl)-3-fluorobenzoate (50 mg, 0.1 mmol), Pd2(dba)3 (9 mg, 0.01 mmol), Dave-Phos (8 mg, 0.02 mmol), t-BuONa (19 mg, 0.2 mmol) and morpholine (17 mg, 0.2 mmol) were mixed in 5 ml toluene under N2 and then stirred at 100° C. for 2 h. The reaction mixture was next cooled to room temperature, acidified with 1N HCl, and then poured into 100 ml EA. The mixture was washed sequentially with H2O (20 ml*3) and brine (20 ml), dried and concentrated in vacuo. The residue was purified by Prep-TLC (PE: EA=3:1) to afford the title compound. (15 mg, yield: 30%). LCMS (ESI) calc'd for C26H22ClFN4O4 [M+H]+: 509. found: 509.
A mixture of methyl 4-(1-(2-chloro-4-hydroxy-6-methylbenzoyl)-1H-pyrazolo[4,3-b]pyridin-3-yl)-3-fluorobenzoate (AV-1) (15 mg, 0.03 mmol) and LiOH (7 mg, 0.3 mmol) in 5 ml THF and 1 ml H2O was stirred for 4 h at room temperature, acidified with 1N HCl and concentrated. The residue was purified by Prep-HPLC (ACN: H2O) to afford the title compound 10 mg (yield: 67%). LCMS (ESI) calc'd for C25H20ClFN4O4 [M+H]+: 495. found: 495. 1HNMR (400 MHz, DMSO) δ 13.5 (1H, s), 8.88˜8.92 (1H, d), 8.28˜8.34 (1H, t), 7.94˜7.99 (1H, d), 7.80˜7.86 (2H, m), 6.90˜6.96 (2H, d), 3.72˜3.77 (4H, t), 3.24˜3.29 (4H, t), 2.21 (3H, s).
To a solution of 1-(2-chloro-6-(trifluoromethyl)benzoyl)-3-(2-fluoro-4-(methoxycarbonyl)phenyl)-1H-pyrazolo[4,3-b]pyridine-6-carboxylic acid (50 mg, 0.1 mmol) in DCM (5 mL) was added oxalyl dichloride (51 mg, 0.2 mmol) with ice-cooling. Then DMF (2 drops) was added. The mixture was stirred at room temperature for 3 h. The solvent was evaporated to obtain the title compound as solid (53 mg), which was used in the next step without further purification. LCMS (ESI): calc. C23H11Cl2F4N3O4, [M+H]+: 540. found: 540.
To a solution of methyl 4-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-6-(dicyclopropylcar-bamoyl)-1H-pyrazolo[4,3-b]pyridin-3-yl)-3-fluorobenzoate (AW-1) (53 mg, 0.1 mmol) in DCM (5 mL) was added dicyclopropylamine (27 mg, 0.2 mmol). Then Et3N (15 mg, 0.15 mmol) was added. The mixture was stirred at room temperature for 14 h. Water (15 mL) was added, and the aqueous phase was extracted with DCM. The organic phase was collected, washed with brine, dried over anhydrous Na2SO4, and concentrated to obtain the title compound (50 mg), which was used subsequently without further purification. LCMS (ESI): calc. C29H21ClF4N4O4, [M+11]+: 601. found: 601.
A mixture of methyl 4-(1-(2-chloro-6-(trifluoromethyl)benzoyl)-6-(dicyclopropylcar-bamoyl)-1H-pyrazolo[4,3-b]pyridin-3-yl)-3-fluorobenzoate (AW-2) (40 mg, 0.067 mmol) and LiOH.H2O (28 mg, 0.67 mmol) in 4 ml THF and 4 ml H2O was stirred at room temperature for 1 hour. The solvent was evaporated and the residue was dissolved in water. HCl (5% sol in water) was added until pH=4-5. The product was extracted by EtOAc, and the extracts were concentrated to obtain a crude solid. The product was purified by prep-HPLC to obtain the title compound (8 mg), yield 20.38%. LCMS (ESI): calc. C28H19ClF4N4O4, [M+H]+: 587. found: 587. 1HNMR (400 MHz, DMSO) δ 9.10 (1H, s), 8.99 (1H, s), 8.38-8.42 (1H, m), 7.96-8.07 (3H, m), 7.98-7.92 (1H, m), 7.83 (1H, d, J=10.8 Hz), 2.87 (2H, s), 0.73 (8H, s).
A mixture of methyl 4-(1-(4-bromo-2-chloro-6-methylbenzoyl)-1H-pyrazolo[4,3-b]pyridin-3-yl)-3-fluorobenzoate (150 mg, 0.3 mmol), LiHMDS (251 mg, 1.5 mmol), Pd2(dba)3 (137 mg, 0.15 mmol), and X-phos (72 mg, 0.15 mmol)) in 4 mL THF was heated under argon to 80° C. for 2 hrs under microwave. HCl (1M) was added until PH=7, and the mixture was diluted with EtOAc (50 mL), washed with brine (50 mL*2), dried over anhydrous Na2SO4, and concentrated in vacuo. The residue was purified by silica gel column (DCM) to obtain the title compound as a white solid. LCMS (ESI): calc'd for C22H16ClFN4O3, [M+H]+: 439. found: 439
A mixture of methyl 4-(1-(4-amino-2-chloro-6-methylbenzoyl)-1H-pyrazolo[4,3-b]pyridin-3-yl)-3-fluorobenzoate (AX-1) (131 mg, 0.3 mmol) and NaH (36 mg, 1.5 mmol) in 10 mL DMF was stirred for 10 mins, after which CH3I (86 mg, 0.6 mmol) was added and the reaction mixture was stirred for 14 h. NH3.H2O (1M) was added until PH=9-10, and the mixture was diluted with EtOAc (50 mL), washed with brine (50 mL*2), dried over anhydrous Na2SO4, and concentrated in vacuo. The residue was purified by silica gel column (DCM) to obtain the title compound. LCMS (ESI): calc'd for C24H20ClFN4O3, [M+H]+: 467. found: 467
A mixture of methyl 4-(1-(2-chloro-4-(dimethylamino)-6-methylbenzoyl)-1H-pyrazolo[4,3-b]pyridin-3-yl)-3-fluorobenzoate (AX-2) (32 mg, 0.07 mmol) and LiOH.H2O (16 mg, 0.37 mmol) in 10 mL THF and 10 mL pure H2O was stirred at room temperature for 2 hrs. The solvent was evaporated and the residue was dissolved in water. HCl (5% sol in water) was added until pH=4-5. The precipitated solid was filtered, washed sequentially with water (10 mL) and n-hexane (10 mL), and dried to afford the title compound as a solid. LCMS (ESI): calc'd for C23H18ClFN4O3, [M+H]+: 453 found: 453; 1HNMR (400 MHz, DMSO) δ 8.84-8.90 (2H, m), 8.29-8.33 (1H, m), 7.96-7.98 (1H, m), 7.80-7.86 (2H, m), 6.65-6.66 (2H, m), 3.00 (6H, s), 2.21 (3H, s)
To a solution of methyl 3-fluoro-4-(1H-pyrazolo[4,3-b]pyridin-3-yl)benzoate (105 mg, 0.387 mmol) in MeOH (2.5 mL) was added water (2.5 mL) and sodium hydroxide (155 mg, 3.87 mmol). The mixture was stirred at 60° C. for 1 h. The mixture was acidified by aqueous HCl to pH=1, and the mixture was evaporated to dryness. The residue was purified by silica gel flash column (PE:EA=1:1) to afford the title compound (100 mg, yield: 100%). LCMS (ESI): calc'd for C13H8FN3O2 [M+H]+: 258. found: 258.
To a solution of 3-fluoro-4-(1H-pyrazolo[4,3-b]pyridin-3-yl)benzoic acid (AY-1) (80 mg, 0.31 mmol) in 5 mL of THF at −30° C. was added dropwise a solution of LDA (0.62 mL, 1.24 mmol), and the reaction mixture was stirred at 15° C. for 2 h. 2-chloro-6-cyclopentylbenzoyl chloride (82 mg, 0.34 mmol) in 5 mL of THF was added dropwise to the reaction mixture at 0° C., and the reaction mixture was stirred at the same temperature for 0.5 h and 15° C. for 4 h. After the reaction was completed, the reaction mixture was quenched by 5 mL of water and acidified with 2 M HCl to pH=3. The mixture was next extracted with EtOAc (100 mL*3). The combined organic extracts were washed with brine (100 mL*2), dried over Na2SO4 and concentrated. The crude product was purified by prep-HPLC (acetonitrile+0.75%0 trifluoroacetic acid in water) to give the title compound (10 mg, yield: 14%) as a white solid. LCMS (ESI): calc'd for C25H10ClFN3O3 [M+H]+: 464. found: 464; 1H NMR (400 MHz, CDCl3) δ 8.94 (1H, d, J=8.22 Hz), 8.81 (1H, d, J=3.52 Hz), 8.00-8.06 (1H, m), 7.86 (1H, d, J=7.84 Hz), 7.76 (1H, d, J=10.18 Hz), 7.59 (1H, dd, J=8.22, 4.70 Hz), 7.32-7.37 (1H, m), 7.26-7.31 (1H, m), 7.23 (1H, d, J=7.84 Hz), 2.86 (1H, t, J=8.02 Hz), 2.02-2.12 (1H, m,), 1.66-1.81 (3H, m), 1.44-1.60 (4H, m)
To a solution of methyl 3-fluoro-4-(1H-pyrazolo[4,3-b]pyridin-3-yl)benzoate (147 mg, 0.54 mmol) in 10 mL of THF was added NaH (32 mg, 0.82 mmol) dropwise at 0° C., and the mixture was stirred at 15° C. for 30 min. 2-chloro-6-cyclohexylbenzoyl chloride (150 mg, 0.54 mmol) in 5 mL of THF was added dropwise, and then the mixture was stirred at 0° C. for 0.5 h before being allowed to come to 15° C. for 2 h. After the reaction was completed, the reaction mixture was quenched with 5 mL of water and extracted with EtOAc (100 mL*3). The combined organic layers were washed with brine (100 mL), dried over Na2SO4, filtered and concentrated in vacuo. The residue was purified by prep-TLC (PE: EtOAc=5:1) to give the title compound (70 mg, yield: 26%) as a white solid. LCMS (ESI): calc'd for C27H23ClFN3O3 [M+H]+: 492. found: 492;
To a solution of methyl 4-(1-(2-chloro-6-cyclohexylbenzoyl)-1H-pyrazolo[4,3-b]pyridin-3-yl)-3-fluorobenzoate (AZ-1) (50 mg, 0.1 mmol) in 5 mL of THF/H2O (4:1) was added lithium hydroxide hydrate (17 mg, 0.4 mmol), and the reaction mixture was stirred for 12 h at 15° C. After the reaction was completed, the mixture was acidified with 2 M HCl to pH=3 and then extracted with EtOAc (300 mL*3). The combined organic layers were washed with brine (200 mL*2), dried over Na2SO4 and concentrated. The residue was purified by prep-HPLC (acetonitrile+0.75%0 trifluoroacetic acid in water) to afford the title compound (15 mg, yield: 31%) as a white solid. LCMS (ESI): calc'd for C26H2iClFN3O3 [M+H]+: 478. found: 478; 1H NMR (400 MHz, CDCl3) δ 9.01 (1H, d, J=8.4 Hz), 8.88 (1H, d, J=3.6 Hz), 8.07 (1H, t, J=7.2 Hz), 7.93 (1H, d, J=7.6 Hz), 7.82 (1H, d, J=10.0 Hz), 7.66 (1H, dd, J=8.4, 4.50 Hz), 7.37-7.44 (1H, m), 7.27-7.35 (2H, m), 2.43 (1H, t, J=11.6 Hz), 1.98 (1H, d, J=12.4 Hz), 1.78 (2H, d, J=12.0 Hz), 1.58-1.71 (2H, m), 1.37-1.50 (2H, m), 1.24 (2H, t, J=13.6 Hz), 0.99-1.13 (1H, m).
The compounds of the invention inhibit RORgammaT activity. Activation of RORgammaT activity can be measured using, e.g., biochemical TR-FRET assay. In such an assay, interaction of cofactor-derived peptides with human RORgammaT-Ligand Binding Domain (LBD) can be measured. The TR-FRET technique is a sensitive biochemical proximity assay that will give information concerning the interaction of a ligand with the LBD, in the presence of cofactor-derived peptides (Zhou et al., Methods 25:54-61, 2001)
o identify novel antagonists of RORgammaT, an assay was developed which employs the interaction of RORgammaT with its co-activator peptide SRC1—2. This peptide mimics the recruitment of co-activators to RORgammaT through its interaction with the LXXLL (SEQ ID NO:1) (e.g., NR box) motifs (Xie et al., J. Immunol. 175: 3800-09, 2005; Kurebayashi et al., Biochem. Biophys. Res. Commun. 315: 919-27, 2004; Jin et al., Mol. Endocrinology 24:923-29, 2010). The RORγ-Ligand Binding Domain TR-FRET Assay was run according to the following protocol.
HIS-tagged RORγ-LBD protein was expressed in SF9 cells using a baculovirus expression system. The RORγ-LBD protein was purified by glutathione sepharose chromatography. Separately, SF9 cells not expressing any recombinant protein were lysed and the lysate was added to the purified RORγ-LBD at 0.25 μl lysate (from 10,000 SF9 cells)/nM purified protein. The mixture was then diluted in assay buffer (50 mM Tris pH 7.0, 50 mM KCl, 1 mM EDTA, 0.1 mM DTT) to obtain RORγ-LBD final concentration of 3 nM in 384-well assay plate.
Compounds to be tested were injected to the assay plate using Acoustic Droplet Ejection technology by Echo 550 liquid handler (Labcyte, CA)
stock of biotinylated-LXXLL peptide from coactivator SRC1 (Biotin-CPSSHSSLTERHKILHRLLQEGSPS) (SEQ ID NO:2) was prepared in assay buffer and added to each well (100 nM final concentration). A solution of Europium tagged anti-HIS antibody (1.25 nM final concentration) and APC conjugated streptavidin (8 nM final concentration) were also added to each well.
The final assay mixture was incubated overnight at 4° C., and the fluorescence signal was measured on an Envision plate reader: (Excitation filter=340 nm; APC emission=665 nm; Europium emission=615 nm; dichroic mirror=D400/D630; delay time=100 μs, integration time=200 μs). IC50 values for test compounds were calculated from the quotient of the fluorescence signal at 665 nm divided by the fluorescence signal at 615 nm.
The following table tabulates the biological data disclosed for the instant invention.
| Number | Date | Country | Kind |
|---|---|---|---|
| PCTCN2012080131 | Aug 2012 | CN | national |
| Filing Document | Filing Date | Country | Kind |
|---|---|---|---|
| PCT/US2013/054887 | 8/14/2013 | WO | 00 |
