This invention relates to digital video compression, and in particular buffer underflow prevention.
Video streaming is available over mobile IP networks (3G, GPRS, Wimax, WLAN etc), fixed networks (like DSL, Cable, PSTN etc) and digital television services, and new products are being developed such as DVD-Recorders, Personal Video Players (PVP) for digital video storage, and digital video cameras. All these services and products are competing for the best video quality and best-fixed storage space management.
Video compression technology has become a key technology in digital video communications. Several international standards have been established in video compression, such as MPEG-2, MPEG-4, H263, and the latest standard, H264. One common feature of these standards is that they only provide the syntax of the compressed video stream. The output bit stream can use either a constant-bit-rate encoding process (CBR) or a variable-bit-rate process (VBR). Since many digital video applications are constrained to a constant channel bandwidth or a fixed storage (buffer) size, CBR encoding has been widely adopted because of its practical implementation. However, CBR encoding suffers from some drawbacks.
Firstly, it results in inconsistent visual quality. The amount of compression required can vary significantly between one frame and another, or even between macro-blocks within the same frame. As a result, the decoded video sequence exhibits inconsistent visual quality. Secondly, it can result in low coding efficiency. The bit rate selected has to be sufficient to provide an acceptable picture quality for all parts of the transmission. However, this bit rate is necessarily higher than is required for most of the transmission.
A real video sequence usually consists of many scenes, and each of them may represent very different activity and motion features. Consequently it is desirable that more bits should be allocated to those scenes of high activity whilst fewer bits are required for those of low activity. This is the basis of variable bit rate coding (VBR). Compared with CBR encoding, VBR can provide less delay, consistent visual quality, and higher coding efficiency for many video sequences. However, VBR encoding has very serious bit-rate and buffer-size constraints, in particular because an unconstrained VBR encoder may not meet the bandwidth limitations of the medium over which the signal is to be transmitted because the transient bit-rate may fluctuate significantly. In addition, VBR is difficult to operate over a multi-streaming link because individual parts of the stream cannot be allocated consistently to each stream, as for example in a simple time division multiplex.
Most standard compression processes operate on each block of 8×8 pixels in a frame, (or a group of several adjacent blocks, known as a “macroblock”). The block in the previous frame is identified that most closely resembles the block under consideration (usually the one in the same position or an adjacent one) and the difference between the luminance and chrominance value of each pixel of the block under consideration and the corresponding pixel in the selected preceding block. The resulting data is subjected to a discrete cosine transform, and the resulting values then divided by a quantisation factor Q before transmission. The quantisation factor reduces the individual values such that the data can be transmitted within the available bit rate. A large value of Q allows a greater range of values (more differences between one block and the one it is compared with), but results in loss of fine detail, as small differences in actual values result in the same quantisation level. The value of Q is thus an inverse measure of picture quality. In a VBR system the value of Q is constant for the entire transmission, whereas in a CBR system it can vary between frames.
The invention of the applicant's co-pending International application entitled “Processing Video Signals”, which has the same filing date as the present application and claims priority from United Kingdom application GB 0428160.6, provides a video signal compression process, in which a video sequence is divided into multi-frame segments, the number of bits required to code each video segment in uncompressed form is determined, and a quantisation level is selected for the transmission of each segment such that the overall bit rate of the segment falls within predetermined limits. That invention also provides an encoder suitable to perform the process of the invention. By applying the same quantisation level to a segment of several frames, distracting changes in quantisation level and thus picture quality are reduced. This invention also allows a reduced signalling overhead because the changes in quantisation level are less frequent, and the reduced variability makes buffer control management easier. The segments are defined such that in each segment the number of bits required to code each frame in uncompressed form falls within a range having a predetermined magnitude, and a quantisation level is determined for each segment. This results in segments of variable length, with fewer transitions when the appropriate coding rate is not varying, but the ability to respond to more rapid changes when required.
To further minimise distracting changes in quantisation level, a preferred embodiment of the invention in the co-pending application arranges that if, in three consecutive segments, the first and third segments both have the same quantisation level selected, that level is also applied to the intermediate segment. Furthermore, in the preferred embodiment, large changes in quantisation level between one segment and the next are smoothed. This can be achieved by incrementally adjusting the quantisation level stepwise over a plurality of frames at the boundary between the segments. Preferably the stepwise adjustment in the quantisation level is such that the bit rate in frames of the segment having the higher bit rate is reduced.
The process of determining the quantisation level required to code each segment may be performed by encoding each frame of the sequence with each of a plurality of quantisation values and determining therefrom the quantisation value that most closely satisfies the required bit rate. A suitable mathematical process for deriving this value will be described later in this specification.
In the process disclosed in the co-pending application GB 0428160.6 referred to above, a first pass of the video sequence is used to generate an optimum bit rate for video streaming or fixed storage applications by selecting appropriate quantisation parameters for each segment, and then the complete sequence is transmitted on a second pass. The need for two passes delays the transmission by the time taken to perform the additional pass. However, for some applications it may be possible to determine the appropriate parameters in advance for a number of selected values of bit rate, such that a request for transmission at a given bit rate can be fulfilled more promptly.
Like all digital encoding schemes, this arrangement relies on an adequate buffer store being available at the receiving end of the transmission, because the number of bits per frame varies, and it is necessary to store all the data necessary for the recreation of a frame before it can be generated. Buffer “underflow”, or starvation, can occur if the number of bits per frame is large (and the transmitted frame rate thus falls), such that the decoder does not have sufficient data to generate the next frame at the time it is to be displayed. Buffer overflow occurs when the buffer store is insufficient for the number of bits that have been received, and not yet used.
It is possible to provide the decoder with information generated by the encoder before the start of the video packets' transmission, to allow buffer resources to be reserved to prevent buffer underflow and buffer overflow conditions.
The present invention provides a process of transmitting a digitally encoded video stream in which the rate at which individual segments of data are encoded varies according to the amount of data required to generate each segment, wherein frames are selectively omitted from transmission such that the cumulative frame rate does not fall below a predetermined value. This ensures that the receiver does not experience an underflow condition.
A threshold limit may be set for the amount by which the number of bits per frame may vary within a given sequence, thereby limiting the number of frames that may be deleted. The invention also provides a variable bit rate data decoding process, arranged to identify parts of a decoded transmission from which frames have been omitted, and to resynchronise the displayed stream. Synchronisation may be controlled by comparison between time stamps in the video stream and a corresponding audio stream. Resynchronisation may be performed by extending the durations of individual frames, or by repeating frames.
The applicant's co-pending application entitled “Buffer Overflow Prevention” having the same filing date as the present application and claiming priority from United Kingdom application 0428156.4 provides a process of decoding a digitally encoded video input stream in which individual segments of data are encoded at rates that vary according to the amount of data required to regenerate each segment, wherein the cumulative average frame rate in the input is monitored and frames are selectively deleted from the received input in response to the monitored cumulative average such that the cumulative average frame rate in the decoded output does not fall below a predetermined value.
The invention also provides a variable bit rate data decoding process arranged to identify parts of a decoded transmission from which frames have been omitted, and to resynchronise the displayed stream.
Preferably a threshold limit may be set for the amount by which the number of bits per frame may vary within a given sequence, thus limiting the loss in perceptual quality occasioned by the reduced frame rate. If used in conjunction with the invention of the aforementioned co-pending application claiming priority from United Kingdom application GB 0428160.6, the threshold limit may be the predetermined magnitude within which the number of bits required to code each frame in uncompressed form is constrained to fall.
This mode does not require extra information to be transmitted prior to the ‘Video Streaming session’, and buffering is avoided at the beginning of the clip, so the start-up delay is significantly minimized. Each frame that is displayed will have the same video quality, but the video is displayed with a reduced frame rate, and in consequence the perceived video quality may be slightly impaired.
The setting of a threshold limit also allows a maximum value to be determined for the buffer store required for the receiver to decode the sequence.
An embodiment of the invention will now be described, by way of example, with reference to the drawings, in which:
A video encoder 1 and a decoder 2 are interconnected by a communications link 3. The video encoder 1 is associated with a database 4 from which it can retrieve data for encoding and transmission to the decoder 2, which is associated with a display device 5 such as a television set for displaying the decoded data. The decoder 2 has an associated buffer store 6.
The video encoder 1 comprises a number of functional elements. The encoder 1 processes the data retrieved from the database 4 using a ‘two-pass’ process. Firstly, the entire sequence is parsed (10, 11, 12, 13). From these results, the sequence is split (14) into a number of segments and statistics are stored (15) for those segments. Data from the encoding process is used to generate a general relationship between bit rate and quantisation level (16) and an optimum quantisation level is then identified 17 for each segment. This value is modified by a smoothing process 18. Using these statistics, a final bit-stream (or multiple bit-streams) with ‘VBR’ characteristics can be generated in a second pass 19. The statistics can also be used to prevent ‘buffer-overflow’ and ‘underflow’.
Because this is a ‘two-pass’ process, a delay is introduced which makes the process primarily suitable for non-live video content (Video on demand). However, it will be understood that the processing time required for the first pass may be faster than the transmission rate, as it is not constrained by the bandwidth of the connection 3.
The individual processes will now be discussed in more detail.
In the first pass, the video sequence is first analysed by a number of VBR encoders (10, 11, 12, 13) operating in parallel to encode the video sequence for various quantisation levels Q1, Q2, Q3, Q4. This step is performed frame-by-frame. This is illustrated in
The R-Q function is applicable to multiple streams of variable bit rates so it is referred to below as the ‘Multi-Stream Rate Control (MRC)’ function. It may be determined (process 16) as follows. In this embodiment two mathematical models are used, as experimental results have shown that they are accurate over different ranges of Q.
R=a′ e
−b′Q (MRC function 1)
The second model is a third order polynomial:
R=aQ
3
+bQ
2
+cQ+d (MRC function 2)
where R: average bits/frame
Note here that as the number of bits per frame R falls with increasing values of Q, the quantisation parameter, and both properties can only take positive values, at least one of the coefficients a, b, c will be negative, and a′ and b′ must both be positive.
‘Model 1’ needs two modelling parameters a′, b′, and thus needs two streams to determine the values of those parameters, while ‘Model 2’ needs four modelling parameters, and therefore all four streams are needed to determine their values.
It will be noted that there is a range 20<Q<30 in which the selection of model requires a further stage A ‘switching mechanism’, as will now be described with reference to
For ‘Model1’, apply Q3=30, Q4=40, thus deriving modelling parameters a′, b′.
For ‘Model2’, apply Q1=10, Q2=20, Q3=30, Q4=40, producing modelling parameters a, b, c, d.
After producing the two formulae, set ‘Q=20’ for each one, thus producing different values R20 and R20′ for the two models
The ‘Deviation % (D)’ is calculated between these two values:
D=[(R20′-R20)/R20′]*100%.
In parallel with this process, the video sequence is split into video segments of variable length by a Segment creation (Wn)′ process 14. The “Segment” creation process 14 defines individual windows or segments within the video sequence. It extracts the encoded data from one of the parallel encoders 13, using a fixed quantiser value, for example Q4=40, and determines the value R (average bits per frame) for every S frames, where “S” is the sample rate. For example, if ‘S=1’, this check is performed for every frame. More typically, this value is set equal to the target frame rate. For example, if the target frame rate for a video sequence to be encoded is 15 frames/sec, S is set at a value of 15, so, the check will take place every 15 frames. In the example shown in
Exceptionally, the first segment uses a number of frames equal to twice the value set by ‘S’. This means that the ‘first check’ will take place 2*S=2*15=30, after 30th frame. This is to take account of the presence at the beginning of the clip of an ‘Intra’ frame, which produces more bits than ‘P’ frames. Thus, the bits are better spread over the first segment, producing better VBR characteristics.
The value R (Average bits/frame) is calculated throughout the entire video sequence during the first pass, and the results stored (15). This value R indicates the average number of bits per frame at a specific instant. For example, to calculate ‘R’ for the fifth frame, assuming for the sake of illustration that the first five frames produced 2000 bits, 1000 bits, 500 bits, 1000 bits and 500 bits respectively, R(5)=(2000+1000+500+1000+500)/5=1000 bits/frame.
If the value R exceeds the previous value of R by a threshold value A, (for example 30% larger), the current frame is set as the last frame of the current segment (Wn), and a new segment is created.
The threshold value is set at the beginning of the process by the end-user. The bigger this value, the closer the result will be to ‘VBR’ characteristics. If the value is close to ‘0’, the sequence will be encoded with characteristics close to ‘CBR’. A typical value for this parameter would be 30%.
Thus, during the first pass, four streams have been created with different values of fixed Quantizer Q as shown in
Since the segments have been defined such that the value R varies only within a limited range in each such segment, it is then possible to use the value of R in each segment to determine, using the R-Q function (16), the appropriate quantization factor Q to be used in the second, encoding, pass for each individual segment throughout the entire sequence (process 17). The appropriate value of R, and thus of Q, can be based on constraints such as decoder buffer capacity, transmission rate, or total storage size. These constraints may be pre-set, or obtained as data from the decoder 2.
In order to select the optimum quantisation value Q for each segment, as determined by the optimisation process, a value R is selected that satisfies a condition:
R<Tg/f
R is the average bits per frame to be determined from the R-Q function 16
f: is a Target Frame-Rate: the rate at which the frames are to be delivered to the destination
Tg is a Target Bit-Rate, representing the bit rate required to maintain the target frame rate
For example, if Tg=20000 and f=10, then R<2000 kbits/frame.
An optimum quantisation value Qbest can be determined using the R-Q function. This process is applied to each segment generated by the segmenter 14. If there is a large change in the value of ‘Q’ between one segment and the next, the end-user will notice an abrupt change in video quality, which can be disturbing. To mitigate this effect, this embodiment applies a smoothing process 18 to the quantisation values generated by the optimiser 17. This process is illustrated in
The upper trace of
If the changes are small enough to be accommodated by the smoothing process, the quantisation value Q is changed stepwise at the transition from one segment to the next (steps 73,74). This is always done by increasing the value of Q (reducing the bits/frame) for individual frames from the segment having the lower value of Q, as this is less likely to overload the buffer at the destination. However, if the segment under consideration has a lower quantisation value than both the immediately preceding segment and the one immediately following, the value of Q to be used is first set to be intermediate between those values (step 67), rather than the (lower) optimum value for that segment.
The smoothing process will now be described in more detail. First, the differences in the values of quantizer Q, at the left and right boundaries of segment Wn, are calculated.
(Note that Qn and QR are the values generated by the optimiser 17, but QL is the value resulting from the smoothing process when applied to the previous segment. In its turn, QR will be revised, using for the preceding segment the value of Qn′ that is about to be generated).
These gap values are next assessed to determine whether they exceed a threshold value (step 62, 63). In this example, the threshold value is set at +10.
If either GapLeft or GapRight exceeds this threshold we set a value Qn′=QL, where Qn′ is the new value of Q (step 64). If both GapLeft and GapRight fall at or below the threshold value, a further test is made to determine the signs of the gaps (step 65). If either is negative, we set Qn′=Qn (step 66), in other words the value derived by the optimiser 17 is used. If both gap values are positive or zero, we set Qn′=(QL +QR)/2 (step 67), thereby setting a value intermediate between the values immediately preceding and following the segment under consideration. This results in a lower quality (larger quantisation value) for that one segment than was set by the optimiser 17, but it minimises the transitions in quality between the segments.
Referring now to
These values are used to apply the smoothing process itself, to the first few and last few frames of the Segment Wn, as shown for step 73.
If GapLeftNew has a positive value, the quantisation value of the neighbouring frame QL is applied to the first frame of the segment Wn, and for each subsequent frame the quantisation value is decremented by a ‘step-value’ until a minimum value Qn′ is reached. Subsequent frames then all have this minimum value Qn′. For example, if QL=40, Qn′=32, and Step-value=1, we obtain GapLeftNew=40−32=+8. This value is positive, so for each frame of the segment, starting with the first, the quantizer ‘Q’ is decremented by ‘1’ from the value for the preceding frame until the level Qn′ is attained. So for example, Qn1=40, Qn2=39, Qn3=38 . . . Qn9=32, where Qn1 is the quantizer for the first frame in the ‘Segment Wn’, Qn2 refers to the frame after the first frame and so on. All frames subsequent to the ninth have the value Qn=Q9=32.
Similarly, if GapRightNew is positive the same methodology is used for the last few frames of the segment (step 72, 74), as follows. If GapRightNew is positive the value of ‘Q’ for the last frame of the segment is increased to QR, and each preceding frame is decremented from that of the following frame by the step value, until the minimum value Qn′ is reached. For example if QR=38, Qn′=32, and Step-value=1, we obtain GapRightNew=38−32=+6. This value being positive, the last six frames of the segment (Qnlast-5 to Qnlast) are given quantisation values increasing stepwise from Qn′=32 to QR=38, thus: Qnlast-6=32, Qnlast-5=33 . . . Qnlast-2=36, Qnlast-1=37, Qnlast=38.
It will be seen that the value of GapLeftNew for any given segment is opposite in sign to GapRightNew for the previous segment. If GapLeftNew is negative there is no ‘stepped’ change of Quantizer (Qn′) at the beginning of the segment under consideration (step 75). Instead, the previous segment, having a positive GapRightNew, will instead be subjected to the smoothing process. Similarly if GapRightNew is negative there is no ‘stepped’ change of Quantizer (Qn′) at the end of the segment under consideration (step 75), but the subsequent segment is subjected to the smoothing process by virtue of its positive value for GapLeftNew.
If the gap value for either transition is zero, there is of course no need for any smoothing at that transition. However, it should be noted that such an eventuality is unlikely, as the segments are defined according to changes in the appropriate quantisation level.
The lower part of
This is the end of the ‘First-Pass’, steps 10-18. The encoder 19 may now encode the entire video sequence as in a conventional VBR encoder (encoder 19), on a second pass of the data. It uses the estimated quantization factors Q for each segment, as determined by the optimisation and smoothing procedures 17, 18, and transmits the resulting bit stream to the decoder 2 over the network 3.
As the optimum Quantisation value for any bit-rate can be predicted from the first pass, it is possible to encode multiple streams at the same time with ‘VBR’ characteristics (Multi-stream) as the appropriate bit-rate for each one can be easily predicted from the process. The first pass may be performed at any time, in anticipation of a request for the relevant sequence at a given bit rate, or it may be done on specific demand.
VBR-type inputs present a problem at the receiver 2 in ensuring that sufficient buffering resources are available. There are two inter-related criteria to determine, namely the buffering capacity and the buffering delay. As the number of bits per frame varies, and the bit rate itself is constant, the frame rate will vary. The buffering delay required is that sufficient to allow the slowest frames (highest number of bits per frame) to be delivered and processed in time for them to be displayed, whilst the buffering capacity is determined by the capacity needed to store frames that have been decoded before they are required. As these capacities depend on variations in the number of bits per frame, it cannot be predicted by the decoder without some data relating to the sequence to be decoded.
A mathematical model will be expressed to describe the buffer level at the decoder side for ‘Video Streaming’ applications.
T: Transmission Rate (bits/sec)—this is the bandwidth of the transmission channel 3.
f: Target frame rate (frames/sec)—this is the rate at which the frames represented by the bitstream are to be displayed by the display device 5.
R(t): Average bits/frame for bitstream over time t. This is a cumulative property, varying over time.
t: elapsed time (seconds)
B(t): Bits inserted in the buffer—this parameter shows the number of bits inserted into the buffer over the period of time t.
B(t)′: Bits extracted from the buffer—this parameter shows the number of bits extracted from the buffer over the same period of time t.
The number of bits ‘dB’ contained in the buffer at a given time t is given by:
dB(t)=B(t)−B(t)′
Also, the number of bits B(t) that were inserted into the buffer in the time “t” is given by:
B(t)=T*t
Similarly, the number of bits B(t)′ that have been extracted from the buffer in the same time is given by:
B(t)′=R(t)*f*t
Consequently, the net number of bits ‘dB’ remaining in the buffer at a given time t is given by:
This function identifies the number of bits contained in the buffer at a given time t, assuming that the transmission rate is ideal and fixed at a rate T. Since T and f are predetermined, the value of dB(t) varies over time as a function of R(t).
Buffer underflow, or “starvation”, is the condition that occurs if the next frame is due to be decoded before the necessary data has arrived—in other words the buffer is empty. In order to avoid buffer underflow, it is usual to delay the start of the decoding process after the arrival of the first data in the buffer store. This introduces a delay in display of the video sequence to the end user, and it is desirable to minimise this delay.
From the function above, it is possible to determine a minimum value dBmin(tmin), and also the time tmin at which that minimum value will occur. If this minimum value is negative, that is to say if there is a time tmin at which the number of bits received up to that point by the decoder 2 is less than the number required to have been decoded to maintain the frame rate to the display device 5, an underflow condition exists.
In this embodiment, to avoid buffer underflow, a buffer delay is to be introduced at the beginning of the decoding process for a period of time given by:
tb=dBmin(tmin)/T.
Thus the number of bits received before the decoding process starts is T*tb, thereby priming the buffer by that number of bits. Thus dBmin is raised to zero, and the buffer delay is minimised.
In a VBR system the amount of buffering required varies, as at times of low bit/frame rates the number of bits arriving is greater than the rate at which they are being processed by the decoder. Buffer ‘Overflow’ may occur if there is not enough memory allocated for storing the video packets before they are decoded. If the peak buffer size required can be determined before the transmission of the video sequence, sufficient buffer capacity can be reserved in the decoder in advance.
As already discussed, the number of bits ‘dB’ contained in the buffer at a given time t is given by
dB(t)=(T−R(t)*f)t
Using this function, if the values of R(t) are known, it is possible to identify a time ‘tmax’ when this property dB(t) reaches its peak value, dBmax. From this, the buffer size ‘Bf’ allocated to prevent buffer-overflow can be determined:
Bf=dBmax(tmax)+dBmin(tmin)
where dBmin represents the absolute minimum value of bits with which the buffer is primed to prevent underflow, as already discussed.
In a true VBR transmission the values of tb and Bf cannot be predicted in advance, since they depend on the cumulative variable R(t) which itself depends on the encoding process.
It would be possible for the encoder to generate header information to control the buffer parameters, but this requires an additional overhead.
The input may be generated using the process of steps 10-19 described above, but may also be used with other inputs.
In this embodiment the bitstream is transmitted over a transmission channel having a fixed guaranteed bandwidth (T). Recalling that the net number of bits ‘dB’ remaining in the buffer at a given time t is given by:
dB(t)=(T−R(t)*f)t
where f is the frame rate and R(t) is the cumulative average number of bits per frame. In order to avoid buffer underflow we require that dB(t)≧0 for all times “t” throughout the entire sequence, and it follows that R(t)≦T/f In order to maintain the cumulative number of bits per frame R(t) below this maximum value the data representing some frames may have to be omitted from transmission.
In order to achieve this, the encoder 19 is controlled 31, 32 to selectively omit the data representing certain frames from the transmission, thus avoiding buffer underflow. This can be performed in three different ways:
Firstly, it could be an ‘off-line’ process, which could take place after the end of the ‘VBR’ encoding process described above. Alternatively, it can take place dynamically, during the second pass of the process described above. In a third possibility, the process could take place before the transmission of the clip, and after the complete sequence has been encoded, by checking how many frames are transmitted every second, and dropping frames according to rules to be described later.
The determination of the number of B-frames to be dropped is determined as follows. Over any period t, the number of bits transmitted must not exceed the target transmission rate T. To achieve this, the number of bits produced from the frames are summed over the period t (process 31), and then B-frames are dropped, thus subtracting their bits, until the target rate is achieved (step 32).
ΣB(i)≦T*t
B-Frames could be dropped randomly, or selectively according to a criterion such as “largest first” (so that fewer frames need to be dropped) until the condition is met. This is demonstrated in
The total Number of bits coded in this time frame segment=2240 bits/frame. Note that this value is not the same as R(t) because R(t) is a cumulative value over the entire sequence up to this point.
Applying the values to the inequality expression f≦T/R(t) derived above, this window of ten frames generates a frame rate f′=20000/2325=8.6 fps.
To achieve the target frame rate f=10 fps, at least two B-frames need to be dropped in this window to minimize start-up delay whilst and avoiding buffer underflow. The exact number of frames to be dropped is determined by the summation ΣB(i)≦T*t. Summing the frame sizes:
In other words at least 2400 bits must be removed by dropping ‘B-frames’. Starting at the beginning of the segment, we drop the first B-frame following each of the first two P-frames (i.e. B2, B5). This results in the loss of 1500+1800=3300 bits, which is sufficient to meet the target frame rate f.
A residual start up delay tb may be allowed in order to drop fewer frames. This provides a number of extra bits E=tb×T
These extra bits can be used throughout the sequence to save some of the B-Frames. For example, if buffering is set not to exceed 2 seconds, thus tb=2 sec. If T=20000 bits/sec, E=2 sec*20000 bits/sec=40000 bits extra. In the previous example, 2400 bits to prevent the B-frames from being dropped. So, if the extra bits are subtracted from the bits needed for that instance (t) in the example described earlier, we have: 40000−2400=37600 bits>0.
In other words, for that instance we ‘saved’ two ‘B-Frames’ (not dropped) and we kept 37600 extra bits to be used in next instances, repeating the process until the end of clip is reached. It will be apparent that the larger the ‘buffering’, the fewer ‘B-Frames’ will be dropped, but the larger the start-up delay will be.
This process requires certain frames of the sequence to be dropped from transmission. Certain criteria need to be met to ensure that the consequent impairment of the quality is minimised. Referring again to
The existence of this threshold ensures that the frame rate will not drop below a value fmin given by:
f
min
=f(1−A)
where f is the target frame rate, and A is the threshold previously defined. For example, if the threshold A=30%, and the target frame rate f=25 fps,
F
min=25×(1−0.3)=17.5 fps.
In this example the frame rate cannot fall below 17.5 fps throughout the entire sequence.
In order that the frames to be dropped can be selected from the B-frames alone, the ratio of ‘B-frames’ to ‘P-frames’
n(B)/n(P)≧kA
where, n(B)=number of ‘B’-Frames
In other words, the process requires that for this threshold value the B/P ratio should be no smaller than 0.6. This ratio can be very easily set in most implementations of the H264 standard. Of course, when the actual rate exceeds the target frame rate, there is no need for any frames to be dropped to avoid buffer starvation.
It should be noted that although individual B-frames are dropped, the receiver can detect the absence of these frames by comparing time stamps in the video stream and a corresponding audio stream, or by means of a coded “place marker” transmitted in place of the missing frame, or because of the absence of a B-frame from the normal pattern of B- frames and P-frames that are received. The receiver compensates for the missing frame by repeating a frame, interpolating between frames, or extending the duration of an existing frame
A buffer overflow avoidance process, in accordance with the invention of our co-pending International application entitled Buffer Overflow Prevention and claiming priority from United Kingdom application GB0428156.4 takes place at the receiver, during the streaming of the sequence. As for the underflow avoidance system previously described, this relies on the presence of B-frames, and the encoding of the stream with a threshold A limiting the variability of the number of bits per frame.
The maximum memory allocated to the end-device will be defined as M. If this value is exceeded, ‘buffer overflow’ will occur. It has already been known that the state of the ‘buffer’ throughout the streaming of the sequence is represented by
dB(t)=(T−R(t)*f)t.
By having applied the process described earlier, we can be sure that for any t, dB(t)≧0.
In order to avoid ‘buffer overflow’, dB(t)≦M for any instance t. A threshold for the maximum transmission frame rate fmax is defined to be: fmax≦f(1+A)
where f: target frame rate,
For example, for a target frame rate f=25 fps, threshold variation set at A=30%,
fmax≦25* (1+0.3)=32.5 frames per sec.
This is the maximum transmission frame rate, which is responsible for building-up the buffer content.
This property fmax ensures that, of the frames transmitted over the period t, a proportion no larger than A (=30%) will be dropped, so the resulting frame rate will not drop below 30% of the target frame rate.
Buffer overflow can be avoided by using these two properties M and Fmax. The bit rate is first determined (step 41). If the condition dB(t)≦M is satisfied, there is no need to take any measures, as buffer overflow will not occur. But, in the case where this condition is not met frames are dropped from the segment which has been most recently delivered from the network (step 42). The number of ‘B-frames’ to be dropped is determined in the same way as already discussed in relation to the encoder:
ΣB(i)≦T*t
The B-frames can be dropped using the same rules as described above for underflow prevention, as illustrated in
The receiver 2 applies a synchronisation 7 to the decoded video frame timestamps with those in the audio stream. This causes a frame to be maintained on display for longer, or repeating the display of a frame until the audio timestamps resynchronise with it.
The modes illustrated in
The invention may be used to control a single stream, or it may be used for multi-channel rate control. In other words, one stream could be delivered to devices connected to different ‘pipes’ of different transmission rate (T) or ‘Bandwidth’. For example if a ‘VBR’ clip was encoded, applying the rules defined above and with a target transmission rate of T=500 kbps, the sequence could be streamed to several devices connected to the network, with a wide range of bandwidth. All such devices would receive the same video quality, but lower bandwidth devices would experience a reduced frame rate. Each device would set its ‘Target Transmission rate’ according to its connection, and the rules and functions described above apply for that ‘Target transmission rate’.
Number | Date | Country | Kind |
---|---|---|---|
0428155.6 | Dec 2004 | GB | national |
Filing Document | Filing Date | Country | Kind | 371c Date |
---|---|---|---|---|
PCT/GB05/04717 | 12/8/2005 | WO | 00 | 6/12/2007 |