Patent Application
20150056137
The present disclosure relates to caspase-triggered self-assembling nano-aggregation probes for the detection of apoptopic cells and tissues. The present disclosure further relates to methods of detecting and imaging cells and tissues that are apoptopic.
Controlling small molecules to self-assemble into supramolecular complexes is pervasive among living things, which build complex structures for high-order functions necessary for life (Whitesides et al., (1991) Science. 254: 1312-1319; Capito et al., (2008) Science 319: 1812-1816). In the laboratory, this principle of self-assembly is also widely used to synthesize supramolecules and nano/microstructures (O'Leary et al., (2011) Nat. Chem. 3: 821-828; Gazit, E. (2010) Nat. Chem. 2: 1010-1011; Yang et al., (2008) Acc. Chem. Res. 41: 315-326). Recently, extensive efforts have been made to design and control small molecules with the propensity to self-assemble in living cells (Liang et al., (2010) Nat. Chem. 2: 54-60; Gao et al., (2012) Nat. Commun. 3: 1033; Adler-Abramovich et al., (2012) Nat. Chem. Biol. 8: 701-706; Williams et al., (2011) Biomaterials 32: 5304-5310; Ye et al., (2011) Angew. Chem. Int. Ed. 50: 2275-2279). In these examples, membrane-permeable small molecules are shown to enter cells and undergo self-assembly after activation by intended cellular targets, such as an enzyme. This recent progress has already generated promising applications such as imaging a proteolytic enzyme activity in subcellular locations, and has provided possible means to investigate and control self-assembly in the context of living cells. Further advances in achieving controlled self-assembly of small molecules in whole mammalian organisms would offer myriads of applications in biology and medicine such as controlled drug delivery (Vemula et al., (2011) J. Biomed. Mater. Res. A 97: 103-110), synthesis of new functional molecules, new ways for regulating cellular processes and molecular imaging in living subjects. Unfortunately, there are no previous examples of controlled self-assembly of synthetic small molecules at the level of whole mammalian organisms. The in vivo physiological environment—a much more complex and dynamic setting than cultured cells—demands high bioorthogonality and biocompatibility of the chemistry that controls self-assembly, and also presents significant challenges to characterize such a system.
Currently, a number of biocompatible reactions including Staudinger ligation (Saxon & Bertozzi (2000) Science 287: 2007-2010; Lin et al., (2005) J. Am. Chem. Soc. 127: 2686-2695), strain-promoted azide-alkyne cycloaddition 14,15, trans-cyclooctene/tetrazine cycloaddition (Devaraj et al., (2009) Angew. Chem. Int. Ed. 48: 7013-7016; Blackman et al., (2008) J. Am. Chem. Soc. 130: 13518-13519; Lang et al., (2012) Nat. Chem. 4: 298-304), and Pictet-Spengler ligation (Agarwal et al., (2013) Proc. Natl. Acad. Sci. U.S.A. 110: 46-51), have been developed for probing biological interactions in living systems, some of which have been shown to work in cells (Yusop et al., (2011) Nat. Chem. 3: 239-243; Chan et al., (2012) Nat. Chem. 4: 973-984), but very few can work in living organisms (Prescher et al., (2004) Nature 430: 873-877; Laughlin et al., (2008) Science 320: 664-667; Devaraj et al., (2012) Proc. Natl. Acad. Sci. U.S.A. 109: 4762-4767; Sletten & Bertozzi (2011) Acc. Chem. Res. 44: 666-67622-25). A new biocompatible reaction between free cysteine and cyanobenzothiazole (CBT) has been reported that can proceed in physiological conditions with a fast second-order rate constant (9.1 M−1s−1) (Ren et al., (2009) Angew. Chem. Int. Ed. 48: 9658-9662; Van de Bittner et al., (2013) J. Am. Chem. Soc. 135: 1783-1795). This reaction has been successfully applied to protein labelling (Devaraj et al., (2012) Proc. Natl. Acad. Sci. U.S.A. 109: 4762-4767) and protease activity imaging in living cells (Liang et al., (2010) Nat. Chem. 2: 54-60).
Recently, a few radiolabeled sulfonamide small-molecule caspase-3 inhibitors have been reported for PET imaging of caspase-3 in apoptotic cells (Nguyen et al., (2009) Proc. Natl. Acad. Sci. USA 106: 16375-16380; Zhou et al., (2009) Org. Biomol. Chem. 7: 1337-1348; Faust et al., (2007) J. Nucl. Med. Mol. Imaging. 51: 67-73; Reshef et al., (2010) J. Nucl. Med. 51: 837-840). However, a PET tracer that is mechanistically similar to the activatable fluorescent probes and can image caspase-3 activity with signal amplification has not been reported.
MRI probes that can specifically report on enzyme activity have become particularly attractive due to variations in enzyme expression levels in many diseases. The inherently low detection sensitivity of MRI has limited the development of enzyme activatable MRI probes for in vivo application. However, novel activatable MRI probes enable can high spatial resolution imaging of specific enzyme activity in vivo and are thus in high demand.
Recently, an activatable thulium-based paramagnetic chemical exchange saturation transfer (PARACEST) MRI probe and a paramagnetic relaxation-based 19F MRI probe have been reported to detect caspase-3 activity with high sensitivity in solution. However, a probe responsive to caspase-3 that employs gadolinium, one of the major clinically used sources of MRI contrast, has not yet been reported.
The disclosure provides embodiments of the synthesis, radiolabeling and biological applications of an activatable tracer that undergoes intramolecular cyclization and aggregation in apoptotic tumor cells upon caspase-3 activation. The aggregated nanoprobes of the disclosure may be detectable optically, by PET detection, magnetic resonance imaging, and the like depending on the detectable reporter attached to the nanoprobe.
One aspect of the disclosure, therefore, encompasses embodiments of an activatable probe comprising a detachable capping moiety conjugated to a self-cyclizing molecule comprising a cysteine moiety, a 2-cyano-6-hydroxyquinoline moiety, an amino luciferin scaffold, and a detectable imaging moiety.
In some embodiments of this aspect of the disclosure, the activatable probe can have the formula II, III, or IV:
Another aspect of the disclosure encompasses embodiments of a pharmaceutically acceptable composition comprising an activatable probe according to the disclosure and a pharmaceutically acceptable carrier.
Yet another aspect of the disclosure encompasses embodiments of a nano-aggregation probe, wherein said nanoprobe is an aggregate of an activated probe, wherein said activated probe comprises a self-cyclized molecule having the formula I and a detectable imaging moiety, wherein the detectable probe is a fluorophore or a radionuclide.
Still another aspect of the disclosure encompasses embodiments of a method of forming a nano-aggregation probe comprising delivering to an apoptotic cell a pharmaceutically acceptable composition comprising an activatable probe, wherein said activatable probe can comprise a detachable capping moiety conjugated to a self-cyclizing molecule, said self-cyclizing molecule comprising a cysteine moiety, a 2-cyano-6-hydroxyquinoline moiety, an amino luciferin scaffold, and a detectable imaging moiety, wherein the detachable capping moiety has the amino acid sequence L-aspartate-glutamate-valine-aspartate and is selectively cleavable from the self-cyclizing molecule by caspase 3/7, whereupon the activatable probe can enter the apoptotic cell, an apoptopically-induced caspase 3/7 cleaves the detachable capping moiety from the activatable probe, and said probe aggregates to form the nano-aggregation probe.
Still yet another aspect of the disclosure encompasses embodiments of a method of detecting an apoptotic cell, the method comprising the steps of: (i) delivering to the cytoplasm of an animal cell a pharmaceutically acceptable composition comprising an activatable probe, wherein said activatable probe comprises a detachable capping moiety conjugated to a self-cyclizing molecule, said self-cyclizing molecule comprising a cysteine moiety, a 2-cyano-6-hydroxyquinoline moiety, an amino luciferin scaffold, and a detectable imaging moiety, wherein the detachable capping moiety has the amino acid sequence L-aspartate-glutamate-valine-aspartate and is selectively cleavable from the self-cyclizing molecule by caspase 3/7, whereupon the activatable probe enters the apoptotic cell, an apoptopically-induced caspase 3/7 cleaves the detachable capping moiety from the activatable probe, and said probe aggregates to form a nano-aggregation probe; and (ii) detecting the nano-aggregation probe, thereby determining that the animal cell recipient of the activatable probe is apoptotic.
In some embodiments of this aspect of the disclosure, the detectable imaging moiety is a fluorophore and step (ii) can further comprise irradiating the recipient cell with an incident exciting energy, electronically detecting an emitted fluorescence, and measuring the intensity of said emission and optionally generating an image of the fluorescence.
In some embodiments of this aspect of the disclosure, the detectable imaging moiety is detectable by positron electron transmission and step (ii) can further comprise detecting the nano-aggregation probe by PET imaging.
Many aspects of the disclosure can be better understood with reference to the following drawings.
Representative dot plots show that FLICA-positive apoptotic cells were efficiently labeled by C-SNAF, but not by control probes (L-ctrl and D-ctrl), demonstrating a good correlation between C-SNAF and FLICA.
The drawings are described in greater detail in the description and examples below.
The details of some exemplary embodiments of the methods and systems of the present disclosure are set forth in the description below. Other features, objects, and advantages of the disclosure will be apparent to one of skill in the art upon examination of the following description, drawings, examples and claims. It is intended that all such additional systems, methods, features, and advantages be included within this description, be within the scope of the present disclosure, and be protected by the accompanying claims.
Before the present disclosure is described in greater detail, it is to be understood that this disclosure is not limited to particular embodiments described, and as such may, of course, vary. It is also to be understood that the terminology used herein is for the purpose of describing particular embodiments only, and is not intended to be limiting, since the scope of the present disclosure will be limited only by the appended claims.
Where a range of values is provided, it is understood that each intervening value, to the tenth of the unit of the lower limit unless the context clearly dictates otherwise, between the upper and lower limit of that range and any other stated or intervening value in that stated range, is encompassed within the disclosure. The upper and lower limits of these smaller ranges may independently be included in the smaller ranges and are also encompassed within the disclosure, subject to any specifically excluded limit in the stated range. Where the stated range includes one or both of the limits, ranges excluding either or both of those included limits are also included in the disclosure.
Unless defined otherwise, all technical and scientific terms used herein have the same meaning as commonly understood by one of ordinary skill in the art to which this disclosure belongs. Although any methods and materials similar or equivalent to those described herein can also be used in the practice or testing of the present disclosure, the preferred methods and materials are now described.
All publications and patents cited in this specification are herein incorporated by reference as if each individual publication or patent were specifically and individually indicated to be incorporated by reference and are incorporated herein by reference to disclose and describe the methods and/or materials in connection with which the publications are cited. The citation of any publication is for its disclosure prior to the filing date and should not be construed as an admission that the present disclosure is not entitled to antedate such publication by virtue of prior disclosure. Further, the dates of publication provided could be different from the actual publication dates that may need to be independently confirmed.
As will be apparent to those of skill in the art upon reading this disclosure, each of the individual embodiments described and illustrated herein has discrete components and features which may be readily separated from or combined with the features of any of the other several embodiments without departing from the scope or spirit of the present disclosure. Any recited method can be carried out in the order of events recited or in any other order that is logically possible.
Embodiments of the present disclosure will employ, unless otherwise indicated, techniques of medicine, organic chemistry, biochemistry, molecular biology, pharmacology, toxicology, and the like, which are within the skill of the art. Such techniques are explained fully in the literature.
It must be noted that, as used in the specification and the appended claims, the singular forms “a,” “an,” and “the” include plural referents unless the context clearly dictates otherwise. Thus, for example, reference to “a support” includes a plurality of supports. In this specification and in the claims that follow, reference will be made to a number of terms that shall be defined to have the following meanings unless a contrary intention is apparent.
As used herein, the following terms have the meanings ascribed to them unless specified otherwise. In this disclosure, “comprises,” “comprising,” “containing” and “having” and the like can have the meaning ascribed to them in U.S. patent law and can mean “includes,” “including,” and the like; “consisting essentially of” or “consists essentially” or the like, when applied to methods and compositions encompassed by the present disclosure refers to compositions like those disclosed herein, but which may contain additional structural groups, composition components or method steps (or analogs or derivatives thereof as discussed above). Such additional structural groups, composition components or method steps, etc., however, do not materially affect the basic and novel characteristic(s) of the compositions or methods, compared to those of the corresponding compositions or methods disclosed herein.
Prior to describing the various embodiments, the following definitions are provided and should be used unless otherwise indicated.
The term “positron emission tomography” as used herein refers to a nuclear medicine imaging technique that produces a three-dimensional image or map of functional processes in the body. The system detects pairs of gamma rays emitted indirectly by a positron-emitting radioisotope, which is introduced into the body on a metabolically active molecule. Images of metabolic activity in space are then reconstructed by computer analysis. Using statistics collected from tens-of-thousands of coincidence events, a set of simultaneous equations for the total activity of each parcel of tissue can be solved by a number of techniques, and a map of radioactivities as a function of location for parcels or bits of tissue may be constructed and plotted. The resulting map shows the tissues in which the molecular probe has become concentrated. Radioisotopes used in PET scanning are typically isotopes with short half-lives such as carbon-11 (about 20 min), nitrogen-13 (about 10 min), oxygen-15 (about 2 min), and fluorine-18 (about 110 min). PET technology can be used to trace the biologic pathway of any compound in living humans (and many other species as well), provided it can be radiolabeled with a PET isotope. The half-life of fluorine-18 is long enough such that fluorine-18 labeled radiotracers can be manufactured commercially at an offsite location.
The term “Magnetic Resonance Imaging” or (MRI) as used herein is a method to obtain an image representing the chemical and physical microscopic properties of materials, by utilizing a quantum mechanical phenomenon, named Nuclear Magnetic Resonance (NMR), in which a system of spins, placed in a magnetic field resonantly absorb energy, when applied with a certain frequency.
The term “activatable probe” as used herein refers to a probe monomer of the disclosure that includes a blocking, or capping, peptide that can be cleaved from the probe. Upon cleavage, the probe may then cyclize and aggregate to generate a non-aggregation probe structure. The term “activatable probe” may further refer to a probe of the disclosure that includes a detectable imaging moiety that is a fluorescence emitter and a detachable quencher moiety that may be, for example, attached to the capping moiety. Upon cleavage of the capping moiety from the probe, and hence activation of said probe, the quencher is displaced from the vicinity of the fluorophore imaging moiety and a detectable signal may be generated.
The term “detachable capping moiety” as used herein refers to a structure such as a peptide that when attached to the probe prevents self-cyclization of the probe and subsequent aggregation to form nano-aggregation probes.
The term “chelator” as used herein refers to a molecular moiety that may form ionic bonds to an anion and in particular to metallic ions that have at least two positive charges thereon. Chelating agents containing paramagnetic metals for use in magnetic resonance imaging can also be employed as ancillary agents. Typically, a chelating agent containing a paramagnetic metal is associated with a coating on the nanoparticles. The chelating agent can be coupled directly to one or more of components of the coating layer, such as a polyaspartate coat. Suitable chelating agents include a variety of multi-dentate compounds including EDTA, DPTA, DOTA, and the like. These chelating agents can be coupled directly to functional amino groups of a polyaspartate coat of the nanoparticles.
The term “pharmaceutically acceptable carrier” as used herein refers to a diluent, adjuvant, excipient, or vehicle with which a probe of the disclosure is administered and which is approved by a regulatory agency of the Federal or a state government or listed in the U.S. Pharmacopeia or other generally recognized pharmacopeia for use in animals, and more particularly in humans. Such pharmaceutical carriers can be liquids, such as water and oils, including those of petroleum, animal, vegetable or synthetic origin, such as peanut oil, soybean oil, mineral oil, sesame oil and the like. The pharmaceutical carriers can be saline, gum acacia, gelatin, starch paste, talc, keratin, colloidal silica, urea, and the like. When administered to a patient, the probe and pharmaceutically acceptable carriers can be sterile. Water is a useful carrier when the probe is administered intravenously. Saline solutions and aqueous dextrose and glycerol solutions can also be employed as liquid carriers, particularly for injectable solutions. Suitable pharmaceutical carriers also include excipients such as glucose, lactose, sucrose, glycerol monostearate, sodium chloride, glycerol, propylene, glycol, water, ethanol and the like. The present compositions, if desired, can also contain minor amounts of wetting or emulsifying agents, or pH buffering agents. The present compositions advantageously may take the form of solutions, emulsion, sustained-release formulations, or any other form suitable for use.
The term “nanoparticle” as used herein refers to a particle having a diameter of between about 1 and about 1000 nm. Similarly, by the term “nanoparticles” is meant a plurality of particles having an average diameter of between about 1 and about 1000 nm.
It will be understood by one of ordinary skill in the art that when referring to a population of nanoparticles as being of a particular “size”, what is meant is that the population is made up of a distribution of sizes around the stated “size”. Unless otherwise stated, the “size” used to describe a particular population of nanoparticles will be the mode of the size distribution (i.e., the peak size). By reference to the “size” of a nanoparticle is meant the length of the largest straight dimension of the nanoparticle. For example, the size of a perfectly spherical nanoparticle is its diameter.
The term “detectable signal emitter”, for the purposes of the specification or claims, means a label molecule that is incorporated indirectly or directly into a nanoparticle, wherein the label molecule facilitates the detection of the nanoparticle in which it is incorporated. Thus, “detectable signal emitter” is used synonymously with “label molecule”.
The term “detectable” refers to the ability to detect a signal over the background signal. The detectable signal is defined as an amount sufficient to yield an acceptable image using equipment that is available for pre-clinical use. A detectable signal maybe generated by one or more administrations of the probes of the present disclosure. The amount administered can vary according to factors such as the degree of susceptibility of the individual, the age, sex, and weight of the individual, idiosyncratic responses of the individual, the dosimetry, and the like. The amount administered can also vary according to instrument and digital processing related factors.
The term “in vivo imaging” as used herein refers to methods or processes in which the structural, functional, or physiological state of a living being is examinable without the need for a life-ending sacrifice.
The term “non-invasive in vivo imaging” as used herein refers to methods or processes in which the structural, functional, or physiological state of a being is examinable by remote physical probing without the need for breaching the physical integrity of the outer (skin) or inner (accessible orifices) surfaces of the body.
The term “optical energy” as used herein refers to electromagnetic radiation between the wavelengths of about 350 nm to about 800 nm and which can be absorbed by the dyes or cellulose-based nanoparticles of the embodiments of the photoacoustic probes of the disclosure. The term “optical energy” may be construed to include laser light energy or non-laser energy.
The term “detectable imaging moiety” or “label” as used herein refers to an atom, or radioactive atom detectable by such methods as γ-radiation detection, positron emission transmission, and the like, or to an inorganic or organic molecule that may be detected by an optical method, for example by fluorescence detection, light absorbance and the like. It should be noted that reference to detecting a signal from a probe also includes detecting a signal from a plurality of probes. In some embodiments, a signal may only be detected that is produced by a plurality of probes. Additional details regarding detecting signals (e.g., acoustic signals) are described below.
The “imaging moiety” may be detected either externally to a subject human or non-human animal body or via use of detectors designed for use in vivo, such as intravascular radiation or optical detectors such as endoscopes, or radiation detectors designed for intra-operative use. The imaging moiety is preferably chosen from, but is not limited to a positron-emitting radioactive non-metal or a reporter suitable for in vivo optical imaging. It is contemplated, however, that other detectable labels may be incorporated into the probes of the disclosure including, but not limited to a radioactive nuclide. When the imaging moiety is a radioactive metal ion, i.e. a radiometal, suitable radiometals can be either positron emitters such as 64Cu, 48V, 52Fe, 55Co, 94mTc or 68Ga or γ-emitters such as 99mTc, 111In, 113In, 67Ga. When the imaging moiety is a positron-emitting radioactive non-metal, suitable such positron emitters can include: 11C, 13N, 15O, 17F, 75Br, 76Br, or 124I.
The term “imaging moiety” as used herein may further refer to a reporter suitable for in vivo optical imaging and the reporter is any moiety capable of detection either directly or indirectly in an optical imaging procedure. The reporter can be a light scatterer (e.g. a colored or uncolored particle), a light absorber or a light emitter. More preferably the reporter is a dye such as a chromophore or a fluorescent compound. The dye can be any dye that interacts with light in the electromagnetic spectrum with wavelengths from the ultraviolet light to the near infrared. Most advantageously, the reporter has fluorescent properties.
Organic chromophoric and fluorophoric reporters suitable for use in the probes of the disclosure include groups having an extensive delocalized electron system, e.g. cyanines, merocyanines, indocyanines, phthalocyanines, naphthalocyanines, triphenylmethines, porphyrins, pyrilium dyes, thiapyrilium dyes, squarylium dyes, croconium dyes, azulenium dyes, indoaniline dyes, benzophenoxazinium dyes, benzothiaphenothiazinium dyes, anthraquinones, napthoquinones, indathrenes, phthaloylacridones, trisphenoquinones, azo dyes, intramolecular and intermolecular charge-transfer dyes and dye complexes, tropones, tetrazines, bis(dithiolene) complexes, bis(benzene-dithiolate) complexes, iodoaniline dyes, bis(S,O-dithiolene) complexes. Fluorescent proteins, such as green fluorescent protein (GFP) and modifications of GFP that have different absorption/emission properties are also useful.
Particular examples of chromophores which may be used include: fluorescein, sulforhodamine 101 (Texas Red), rhodamine B, rhodamine 6G, rhodamine 19, indocyanine green, Cy2, Cy3, Cy3B, Cy3.5, Cy5, Cy5.5, Cy7, Cy7.5, Marina Blue, Pacific Blue, Oregon Green 88, Oregon Green 514, tetramethylrhodamine, and Alexa Fluor 350, Alexa Fluor 430, Alexa Fluor 532, Alexa Fluor 546, Alexa Fluor 555, Alexa Fluor 568, Alexa Fluor 594, Alexa Fluor 633, Alexa Fluor 647, Alexa Fluor 660, Alexa Fluor 680, Alexa Fluor 700, and Alexa Fluor 750.
Particularly advantageous are dyes which have absorption maxima in the visible or near infrared (NIR) region, between 400 nm and 3 μm, particularly between 600 and 1300 nm. Optical imaging modalities and measurement techniques include, but are not limited to:
luminescence imaging; endoscopy; fluorescence endoscopy; optical coherence tomography; transmittance imaging; time resolved transmittance imaging; confocal imaging; nonlinear microscopy; photoacoustic imaging; acousto-optical imaging; spectroscopy; reflectance spectroscopy; interferometry; coherence interferometry; diffuse optical tomography and fluorescence mediated diffuse optical tomography (continuous wave, time domain and frequency domain systems), and measurement of light scattering, absorption, polarization, luminescence, fluorescence lifetime, quantum yield, and quenching.
The term “fluorophore” as used herein refers to a component of a molecule that causes a molecule to be fluorescent. It is a functional group in a molecule which will absorb energy of a specific wavelength and re-emit energy at a different (but equally specific) wavelength. The amount and wavelength of the emitted energy depend on both the fluorophore and the chemical environment of the fluorophore. Fluorophores for use in the compositions of the disclosure include, but are not limited to, fluorescein isothiocyanate (FITC), a reactive derivative of fluorescein, which has been one of the most common fluorophores chemically attached to other, non-fluorescent, molecules to create new fluorescent molecules for a variety of applications.
Other historically common fluorophores are derivatives of rhodamine (TRITC), coumarin, and cyanine. Newer generations of fluorophores such as the ALEXA FLUORS® and the DYLIGHT FLUORS® are generally more photostable, brighter, and less pH-sensitive than other standard dyes of comparable excitation and emission.
The term “fluorescent acceptor molecule” as used herein refers to any molecule that can accept energy emitted as a result of the activity of a bioluminescent donor protein, and re-emit it as light energy.
The terms “fluorescence quencher”, “quencher”, or “quenching moiety” as used herein refer to a molecule that interferes with the fluorescence emitted by a fluorophore or bioluminescent polypeptide. This quencher can be selected from non-fluorescent aromatic molecules, to avoid parasitic emissions. Exemplary quenchers include, but are not limited to, Dabsyl or a BLACK HOLE QUENCHER® that are non-fluorescent aromatic molecules that prevent the emission of fluorescence when they are physically near a fluorophore. The quencher can also be, but is not limited to, a fluorescent molecule, for example TAMRA (carboxytetramethylrhodamine). A particularly advantageous quencher suitable for use in the compositions of the disclosure is a modified dye such as IR-775-COOH. When the quencher is a fluorescent dye, its fluorescence wavelength is typically substantially different from that of the reporter dye.
The terms “quench” or “quenches” or “quenching” or “quenched” as used herein refer to reducing the signal produced by a molecule. It includes, but is not limited to, reducing the signal produced to zero or to below a detectable limit. Hence, a given molecule can be “quenched” by, for example, another molecule and still produce a detectable signal, albeit the size of the signal produced by the quenched molecule can be smaller when the molecule is quenched than when the molecule is not quenched.
The term “contrast agent” as used herein refers to an agent that when delivered to an animal or human subject can improve the image obtained by a method such as magnetic resonance imaging (MRI). Such agents may include, but are not limited to gadolinium, iron oxide, manganese and magnesium salts, and the like that may be formulated into pharmaceutically acceptable compositions for administering in vivo with limited and acceptable degrees of undesirable side effects. One suitable MRI contrast agent for incorporation into the liposomal nanoparticle delivery vehicles of the disclosure is gadolinium (Gd), and derivatized variants thereof. A particularly useful such derivative, but not intended to be limiting, is Gadofluorine (GdF, Bayer Schering Pharma AG), a gadolinium analogue that is an amphiphilic, macrocyclic, gadolinium-containing complex. It is a derivative of Gd-DO3A containing a perfluorooctyl side chain and a mannose moiety. Other Gd derivatives for use as an MRI contrast agent are, but not limited to, Carbocyanine-labelled GdF (cc-GdF), Gd-DTPA (MAGNEVIST®, Bayer Schering Pharma, Berlin, Germany), Gd-DO3A and the like.
The term “selectively cleavable” as used herein refers to when a linker is not cleaved by certain reactions conditions, but selectively cleavable by different reaction conditions. The selectively cleavable peptide of the probes of the disclosure will include a peptide bond that can be cleaved by peptidase the activity of which is to be detected by the probe, but not cleaved by other peptidases. For example, but not intended to be limiting, the targeted peptidase can be a caspases 3 or 7 (hereinafter caspases 3/7) that is induced by the onset of apoptosis in a cell and cleaves a peptide bond at the C-terminus of the peptide L-asparate-glutamate-valine-aspartate, whereas same peptide bond is not cleaved by a different peptidase.
The term “caspase” as used herein refers to a family of cysteine-aspartic proteases or cysteine-dependent aspartate-directed proteases that are a family of cysteine proteases that play essential roles in apoptosis (programmed cell death), necrosis, and inflammation. Failure of apoptosis is one of the main contributions to tumor development and autoimmune diseases; this, coupled with the unwanted apoptosis that occurs with ischemia or Alzheimer's disease, has stimulated interest in caspases as potential therapeutic targets. Effector caspases (e.g., CASP3, CASP6, and CASP7) cleave protein substrates within the cell to trigger the apoptotic process. The initiation of this cascade reaction is regulated by caspase inhibitors. Caspases are first synthesized as inactive pro-caspases that consist of a prodomain, a small subunit and a large subunit. Granzyme B (released by cytotoxic T lymphocytes and NK cells) is known to activate caspase-3 and -7.
Further definitions are provided in context below. Unless otherwise defined, all technical and scientific terms used herein have the same meaning as commonly understood by one of ordinary skill in the art of molecular biology. Although methods and materials similar or equivalent to those described herein can be used in the practice or testing of the present disclosure, suitable methods and materials are described herein.
The disclosure provides embodiments of an activatable probe, the synthesis, and biological applications thereof, that undergoes intramolecular cyclization and subsequent aggregation in apoptotic tumor cells upon peptidase initiated, and most advantageously caspase-3, activation. The caspase-sensitive nano-aggregation probes (C-SNAFs) of the disclosure are generally biocompatible, possess NIR spectral properties or may serve as PET or MRI imaging agents, and have a mechanism of target-mediated nanostructure self-assembly amenable to in vivo use. Generation of embodiments of the probes of the disclosure encompass, but are not intended to be limited to, biocompatible condensation chemistry products that may comprise D-cysteine and 2-cyano-6-hydroxyquinoline (CHQ) moieties linked to an amino-luciferin scaffold, and which can be activated by a two-step reaction requiring, most advantageously, both caspase-3/7-mediated cleavage of an aspartate-glutamate-valine-aspartate (L-DEVD) capping peptide and the free intracellular thiol-mediated reduction of the disulfide bond, as shown in
To generate the probes of the disclosure, an optimized CBT-like first-order condensation reaction (Ye et al., (2011) Angew. Chem. Int. Ed. 50: 2275-2279) was used to control self-assembly of a fluorescent small molecule. In vivo applicability is through imaging of chemotherapeutic efficacy of human tumor xenograft mouse models.
Imaging tumor apoptosis could provide invaluable predictive information regarding therapeutic efficacy and anti-cancer drug selection (Brindle, K. 2008) Nat. Rev. Cancer 8: 94-107; Blankenberg, F.G. (2008) J. Nucl. Med. 49 Suppl. 2; 81S-95S). Among the molecular events signalling cellular commitment to apoptosis, the effector caspases (e.g. caspase-3 and -7) (Nguyen et al., (2009) Proc. Natl. Acad. Sci. U.S.A. 106: 16375-16380; Johnson et al., (2012) Bioconjugate Chem. 23: 1783-1793) are the most attractive as apoptosis imaging targets. Using this model system, a series of in vitro and in vivo experiments demonstrated that a synthetic small molecule according to the disclosure can be controlled to self-assemble into nanoparticles, distinguishing negatively from positively responding tumors during the course of chemotherapy. Individual in situ assembled fluorescent nanoparticles have been imaged in apoptotic cells using three-dimensional structured illumination microscopy. This work represents the first synthetic small molecule capable of undergoing self-assembly in living mammalian organisms, proving the potential utility of in situ self-assembly for molecular imaging with this novel bioorthogonal cyclization chemistry.
C-SNAF-cycl, regardless of the nature of the attached labelling moiety, is more rigid and hydrophobic (log P: 3.06 for C-SNAF-cycl vs. −2.44 for C-SNAF) (Tetko et al., (2005) J. Comput. Aided Mol. Des. 19; 453-463), and is thus amenable to increased intermolecular interactions (i.e. hydrophobic interactions, π-π stack) relative to C-SNAF, promoting its in situ nano-aggregation. These nano-aggregates trap the activated probe in apoptotic cells and afford high imaging contrast for treatment response detection.
To demonstrate the caspase-3-triggered in situ self-assembly of C-SNAF in tumors, control compounds were synthesized with similar chemical structures, but with increasing degrees of inertness to activation. One control (designated Loth) comprised a methylated cysteine thiol and a quinolin-6-yl ring replacing the CHQ moiety, preventing intramolecular cyclization following L-DEVD peptide cleavage by caspase-3/7, as shown in
A second control probe (D-ctrl), containing a D-DEVD sequence that is resistant to caspase-3/7 cleavage, allowed monitoring of the contribution of caspase-3-independent chemotherapy-induced tumor changes (i.e. perfusion changes) that could otherwise affect C-SNAF performance in vivo. These probes were synthesized and unambiguously characterized as outlined in the schemes as shown in
The progression of caspase-3-triggered macrocyclization of C-SNAF to form C-SNAF-cycl in solution was monitored using high-performance liquid chromatography (HPLC) following incubation of the probe (25 μM) with recombinant human caspase-3 (4.9×10 μml). C-SNAF (TR=15.8 min) was efficiently converted to the pure cyclized product C-SNAF-cycl (TR=17.7 min) with fast reaction kinetics resulting in a half-life (t1/2) of less than 1 h, as confirmed by HPLC (
Transmission electron microscope (TEM) images of C-SNAF-cycl from the reaction solution revealed that the Cy5.5-labeled macrocycles form nano-aggregates with an average diameter of 174±44 nm (
The specificity of C-SNAF towards other representative cysteine proteases such as caspase-7, caspase-9, cathepsin B, and legumain was examined. Monitoring the incubation of C-SNAF (25 μM) with equal masses of individual recombinant enzymes (0.735 mg/ml) using HPLC unambiguously revealed the high selectivity of the probe toward effector caspases-3 and -7, which share the same peptide substrate specificity (Johnson et al., (2012) Bioconjugate Chem. 23: 1783-1793; Maxwell et al., (2009) Bioconjugate Chem. 20: 702-709) (
The intracellular accumulation and retention of caspase-3/7-activated C-SNAF was investigated in cultured HeLa human cervical cancer cells and MDA-MB-231 human breast cancer cells following treatment with either the broad-spectrum protein kinase inhibitor staurosporine (STS) (Stepczynska et al., (2001) Oncogene 20; 1193-1202) or the widely clinically used first-line chemotherapy agent, doxorubicin (DOX) (Wang et al. (2004) J. Biol. Chem. 279: 25535-25543).
After the validation of the apoptosis cell model, flow cytometry was employed to interrogate the capability of C-SNAF for specifically labeling apoptotic tumor cells in vitro. Co-labeling experiments were carried out in STS-treated HeLa cells incubated with C-SNAF, L-ctrl, or D-ctrl, followed by incubation with FLICA, a recognized standard marker of caspase-3-mediated apoptosis, as shown in
Labelling of apoptotic cells by both FLICA and C-SNAF was inhibited by the caspase-3 inhibitor Z-VAD-fmk, confirming the effector caspase-specific activation of C-SNAF. C-SNAF labeling of apoptotic cells resulted in a nearly 13-fold increase in the Cy5.5 fluorescence relative to viable cells, which was also inhibited by Z-VAD-fmk (as shown in
Apoptotic HeLa cells labeled with C-SNAF were investigated by fluorescence microscopy. C-SNAF accumulated extensively in the cytosol of most of the apoptotic cells, while only negligible fluorescence was observed in either viable cells or apoptotic cells pre-treated with Z-VAD-fmk (
This dose-dependence was recapitulated with DOX, resulting in an approximately 10-fold enhancement in cell labeling efficiency (9 to 92%) with a paralleled 5-fold increase in dose level (1 to 5 μM). Apoptotic cells incubated with L-ctrl or D-ctrl showed relatively weaker fluorescence as compared to C-SNAF (
To confirm the formation of the caspase-3/7-triggered intramolecular cyclization product C-SNAF-cycl in apoptotic cells, C-SNAF (5 μM) was incubated with both cell lysates and whole cells, and the products were analyzed by HPLC. The incubation of C-SNAF with viable cell lysate resulted in the major products of glutathione (GSH)-induced disulfide reduction and some condensation products of CHQ with endogenous free cysteine. However, more than 90% of C-SNAF was converted to C-SNAF-cycl in the lysate of STS- and DOX-induced apoptotic HeLa (
To provide direct evidence for the in situ nano-aggregation of C-SNAF inside cells, three-dimensional structured illumination microscopy (3D-SIM) was used to enable high-resolution imaging of these self-assembled products (Schermelleh et al., (2008) Science 320: 1332-1336; Westphal et al., (2008) Science 320: 246-249). An Alexa 488-labeled probe SIM-1, meeting the photostability requirements for SIM, was first synthesized (as schematically shown in
The incubation of SIM-1 (0.5 mM) with STS-treated HeLa cells resulted in strong and punctate fluorescence distributed throughout individual cells under SIM with an average aggregate size of about 180 nm on x-y plane (n=30). These fluorescent particles were not observed in apoptotic cells incubated with the non-cyclizable control probe SIM-ctrl. Furthermore, SIM imaging revealed the selective nano-aggregation of a caspase-3/7-sensitive probe, C-SNAF-SIM, following incubation with apoptotic cells, but not in viable cells. These fluorescent nanoparticles were distributed throughout both the cytosol and in emerging apoptotic bodies (
Similar to SIM-1, the average nano-aggregate size for C-SNAF-SIM was approximately 150 nm on the x-y plane (n=50), which approximates the size of the nano-aggregates observed by TEM (about 170 nm). Therefore, direct SIM imaging confirmed the capacity of in situ nano-aggregation of C-SNAF in apoptotic cells.
The amenability of C-SNAF to in vivo molecular imaging was assessed in healthy nude mice. C-SNAF showed rapid clearance from the circulation with a blood half-life of 1.0±0.45 h, which was not significantly different from L-ctrl (0.5±0.28 h) (p>0.05) (
To demonstrate the feasibility of C-SNAF to monitor tumor response to chemotherapy in vivo, female nude mice bearing subcutaneous HeLa tumors received either intravenous chemotherapy consisting of three doses of 8 mg/kg DOX (3× DOX)44 or saline (
The fluorescence in tumors reached a maximum 1 h after administration of C-SNAF, and at 4 h there was a significant 1.6-fold increase in fluorescence signal in DOX-treated tumors compared to saline-treated mice (
Extensive ex vivo analyses were performed to investigate the association of caspase-3 activation as a marker for tumor chemotherapeutic response with enhanced tumor retention of C-SNAF. First, immunohistochemistry was performed on tumors treated with saline or 3× DOX and resected 4 h after probe injection, as shown in
These results indicated: (1) the accumulation of both control probes in tumors is treatment-independent, (2) only C-SNAF shows specific labeling of apoptotic tumors responding to chemotherapy, and (3) that the probe undergoes caspase-triggered macrocyclization and nano-aggregation to generate enhanced contrast for imaging apoptotic tumors in vivo.
To demonstrate the capability of C-SNAF to differentiate the degree of tumor response to chemotherapeutic intervention in the same individual mouse, C-SNAF was administered and fluorescence imaging was performed two days following both the first and the third treatment with DOX. Following a single dose of DOX (1× DOX), a moderate but not statistically significant increase in tumor fluorescence intensity relative to saline-treated mice could be detected (
The present disclosure shows the in situ self-assembly of small molecules in living mice through imaging tumor response to chemotherapeutics. The self-assembly chemistry of the disclosure is enabled by a biocompatible cyclization reaction between free cysteine and CHQ groups, which shows a concentration-independent and kinetically fast (6×10−3 s−1) intramolecular condensation (Ye et al., (2011) Angew. Chem. Int. Ed. 50: 2275-2279). This first-order reaction allows for macrocyclization to proceed efficiently in physiological environments independent of local probe concentrations, which is advantageous for controlled self-assembly in vivo over the intermolecular reactions, including the originally reported condensation system based on CBT and cysteine (Liang et al., (2010) Nat. Chem. 2: 54-60). The cysteine concentration in human blood is generally around 10-100 mM (Brigham et al., (1960) J. Clin. Invest. 39: 1633-1638; Salemi et al., (2009) Neurol. Sci. 30: 361-364), which may additionally compromise the ability of the CBT-based system to undergo intermolecular condensation in vivo (Cao et al., (2013) Sci. Rep. 3: 1024). In contrast, the transition from inter- to intramolecular condensation between CHQ and cysteine moieties of the probes of the disclosure effectively outcompetes free cysteine and has resulted in efficient controlled self-assembly in vivo.
A set of control probes, D-ctrl and L-ctrl, were designed and evaluated to conclusively demonstrate the occurrence and requirement of macrocyclization for self-assembly. Since D-ctrl is inert to caspase activation and remains unchanged, its lack of efficacy precludes the significant contribution of changes to tumor physiology other than caspase-3/7 activation to the mechanism of C-SNAF action. The lack of successful imaging by L-ctrl, which can undergo enzyme cleavage but neither macrocyclization nor in situ nano-aggregation, clearly indicates (1) the necessity of macrocyclization, and (2) the inability of mere cleavage of the DEVD capping peptide to account for the mechanism of C-SNAF action. The direct super-resolution visualization of nano-aggregated fluorescent products of both a reduction-triggered SIM-1 probe, but not the non-cyclizable SIM-ctrl, and a caspase-3/7-targeted cyclizable probe C-SNAF-SIM in apoptotic cells, but not in viable cells supports this. Size matching of the particles inside cells observed by SIM with that found by TEM unambiguously establishes the mechanism of triggered nano-aggregation in cells.
Applying the self-assembly strategy to molecular imaging probe design offers significant advantages over existing strategies in that it combines the advantages of small molecules with those of nanomaterials. The small size of the probe ensures deeper tissue penetration and more extensive biodistribution (Wysocki & Lavis (2011) Curr. Opin. Chem. Biol. 15: 752-759). The in situ nano-aggregation affords the activated probe a longer residence time in the target tissue of interest (Merian et al., (2012) Molecules 17: 5564-5591) (e.g. apoptotic tumor tissue).
Finally, the proteolytic process of probe activation is bioorthogonal, permitting the continued activity of target enzymes to result in the activation of orders of magnitude more probe molecules per single enzyme activation event. This signal amplification occurs in contrast to inhibitor-based probes that otherwise shut down the target enzyme after the activation of a single probe molecule and concomitantly interrupt regular cell function (Edgington et al., (2011) Curr. Opin. Chem. Biol. 15; 798-805).
The high specificity of C-SNAF for caspase-3/7 relative to initiator caspases (i.e., caspase-9) and other off-target proteases (i.e., cathepsin B and legumain) (
Similar to other fluorescent probes in the perpetually ‘on’ state regardless of activation, a high background signal in non-apoptotic tissues was observed with C-SNAF, resulting in comparable intensities of maximum fluorescence emission from tumors of mice administered C-SNAF, or L-ctrl or D-ctrl (
Accordingly, through the design of a series of in vitro and in vivo experiments, we unambiguously demonstrate in situ self-assembly of a small-molecule probe enabled by a bioorthogonal cyclization reaction in living mice. This strategy provides an imaging probe that combines the advantages of small molecules with those of nanomaterials for imaging of caspase-3/7 activity in vivo. The enhanced accumulation and retention of the in situ formed nano-aggregates results in high tumor contrast for non-invasive, in vivo imaging of apoptosis and a potential for application to related diseases, such as neurodegenerative diseases and organ transplant rejection. The same strategy can be amenable to other enzyme targets and imaging modalities such as, but not limited to, positron emission tomography and magnetic resonance imaging.
The biocompatible condensation reactions according to the disclosure that generate self-assembled nano-aggregation after enzyme activation are also advantageous as PET tracers for imaging enzymatic activity. In one embodiment, an 18F-labeled caspase-sensitive nano-aggregation PET tracer ([18F]C-SNAT (1) includes a 2-cyano-6-hydroxyquinoline (CHQ) and a cysteine residue whose amino group is coupled to the peptide substrate of caspase-3, DEVD, and whose mercapto group of its side chain is converted to a disulfide bond.
[18F]C-SNAT (1) compares favorably to known apoptosis PET tracers (Table 1) with the highest tumor/muscle ratio in apoptotic tumors, and the highest ratio of uptake value (% ID/g) between apoptotic and non-treated tumors.
aTarget/
aThe maximum values reported at the apoptotic tissue.
btarget uptake ratio between pre and post treatment in same animal.
cTumor/blood.
dtarget uptake ratio between treated and untreated group in different animal.
eQuantified by ex vivo bio-distribution, other data in this column are quantified by PET imaging.
ftarget uptake ratio between stroke and non-stroke region in same animal; PS: phosphatidylserine.
g[2] Hu et al., (2012) Mol. Imaging Biol.. 14: 762-770
Consistent with the mechanism, [18F]-C-SNAT showed a trend of increasing uptake over times (
Furthermore, it is contemplated as a general strategy for developing PET tracers for imaging the activity of other enzymes that the probe compositions of the disclosure are advantageous for use in detecting and imaging enzyme activities other than caspase-3 or caspase 7. For example, but not intended to be limiting, the capping moiety of the probes may be attached to the self-cyclizing moiety by a peptide or other bond that can be selectively cleaved by another protease or peptidase, such as, but not limited to, a furin, MMPs, and the like.
The present disclosure further encompasses activatable MRI contrast agents based on the mechanism of enzyme-activated intramolecular cyclization and subsequent self-assembly into MRI-detectable nanoparticles (GdNPs). For example, but not intended to be limiting, the MRI-detectable labeling moiety attached to the caspase-activatable nanoparticles can be gadolinium, thulium, europium, or similar metal ion. Such metal ions may be attached to the activatable nanoparticles by a chelating agent linker covalently bonded the activatable composition.
Following caspase-3 activation, for example, GdNPs can show an increase in r1 relaxivity relative to the unactivated probe due to an increased iτR. One embodiment of an MRI contrast agent of the disclosure, the MRI probe 15 consists of: a 2-cyano-6-hydroxyquinoline (CHQ) and a D-cysteine residue for efficient biocompatible cyclization, a DEVD peptide recognized by active caspase-3, a disulfide bond reduced by intracellular glutathione, and a Gd-DOTA chelate as the MRI reporter.
After intravenous administration, the relatively small size of the probe 15 can rapidly extravasate and penetrate into tumor tissue. When in apoptotic tumor cells, active caspase-3 can cleave the DEVD capping group, and the reductive intracellular microenvironment would reduce the disulfide, the combination of which would initiate the intramolecular cyclization reaction. Unlike the flexible precursor probe, the macrocyclic product is more rigid and hydrophobic, and can further self-assemble into GdNPs. In addition to their enhanced r1 relaxivity, the GdNPs have a prolonged retention in chemotherapy-responsive tumors due to their large size. Both of these features can enhance the resultant MRI contrast for in vivo applications.
The control probe 1-ctrl (19) was designed to have a similar structure to probe 15, but with a quinolin-6-yl ring replacing the CHQ moiety, preventing intramolecular cyclization following DEVD peptide cleavage by caspase-3 and abrogating GdNP formation. Therefore, 1-ctrl (19) can allow for the interrogation of the relative contribution of peptide cleavage versus triggered self-assembly to the mechanism of MR contrast enhancement.
The progression of caspase-3-triggered intramolecular cyclization of probe 15 in solution was investigated by incubation (200 μM) with recombinant human caspase-3 (50 nM) using high-performance liquid chromatography (HPLC). Probe 15 was shown to efficiently cyclize and form two cyclized isomers and with fast reaction kinetics, as confirmed by HPLC and high resolution mass spectroscopic (HRMS) analysis, as shown in
The formation of GdNPs in solution after caspase-3 activation was measured by dynamic light scattering (DLS), showing the aggregation of particles with a mean diameter of approximately 190 nm. Transmission electron microscopy (TEM) showed the shapes of separated GdNPs with diameters ranging from 50 to a few hundred nanometers. TEM images also showed a darker contrast at the edge of particles indicating a higher density of gadolinium ions at the surface. The exposure of Gd-chelates to the surface of formed GdNPs ensures solvent accessibility and water exchange to generate a more efficient relaxation of water protons.
Water proton r1 relaxivities of probe 15 and 1-ctrl (19) before and after caspase-3 incubation were then measured at 1, 1.5 and 3T. For comparison, the isolated cyclized products 2-I and 2-II were also measured. The relaxivities of 15 and 1-ctrl (19) were similar and higher than Dotarem at all three magnetic fields. The larger relaxivities correspond to a larger molecular size of 15 and 1-ctrl (19) compared to Dotarem, resulting in a longer τR. Upon caspase-3 incubation, enhanced relaxivity for probe 15 was observed, probably due to a further increase in τR resulting from the formation of GdNPs in solution. The r1 value of probe 15 upon caspase-3 activation was approximately 29.3 mM−1 s−1 at 1T, which is about 106% higher than that of probe 15 before activation (14.2 mM−1 s−1), and about 510% higher than Dotarem (4.8 mM−1 s−1). In contrast, after incubation with caspase-3, 1-ctrl (19) gave slightly reduced relaxivities (14% at 1T), which is expected given the decreased size of the cleaved, but non-cyclized, products. Thus, caspase-3 activated self-assembly of cyclized products from probe 15 into GdNPs, but not cleaved products from 1-ctrl (19), generates higher per Gd relaxivity at lower magnetic field strengths. The higher relaxivity of probe 1 after caspase-3 activation was further demonstrated. Moreover, the isolated cyclized products 2-I and 2-II gave similar relaxivities compared to probe 15 upon caspase-3 incubation, indicating a high efficacy for capase-3 activation.
The enzyme specificity of probe 15 was studied by measuring the T1 value resulting from probe incubation (208 μM) with any of five relevant subcellular proteases (caspase-3, -7, -9, cathepsin B and legumain) in enzyme buffer. As shown in
A T1-weighted image (1T) of probe 15 with these enzymes showed brighter signal following incubation with caspase-3 and -7. Additionally, probe 15 (200 μM) can detect as low as 5 nM of caspase-3 in solution according to T1 value measurements (
To image apoptotic cells with probe 15, the cytotoxicity of 15 was first evaluated by incubation of viable HeLa cells at 250 μM for 24 h, which showed no adverse effects on cell viability. Apoptotic HeLa cell models were obtained by treating HeLa cells with staurosporine (STS, 2 μM) for 4 h, followed by further incubation in blank medium for another 24 h. Caspase-3 assays confirmed that the lysates of STS-treated cells showed approximately a 10.5-fold higher caspaes-3 activity than that of non-treated cells, which can efficiently convert probe 15 to 23.
The enhanced caspase-3 activity was further confirmed by incubation of STS-treated and non-treated HeLa cells with a fluorescent probe 1-FITC (22), in which an FITC fluorophore was introduced to replace the Gd-DOTA chelate in probe 1. Caspase-3 can trigger 1-FITC (22) to form similar cyclized products and subsequent nano-aggregation, which can result in a brighter fluorescence signal retained inside apoptotic cells. As shown in
The cellular uptake of Gd was studied by inductively-coupled plasma mass spectrometry (ICP-MS) analysis of the amount of Gd in viable and apoptotic cells after incubation with probe 15 (50-250 μM) for 24 h. As shown in
An MRI study of the cell pellets at 1T showed a significantly (about 3-fold) reduced T1 value in STS-treated cells after incubation with probe 15 as compared to non-treated cells. There was no significant reduction in T1 between STS-treated and non-treated cells incubated with Dotarem. The much shorter T1 value was consistent with the results of T1-weighted images of cell pellets, as shown in
Evaluation of activatable contrast agent probe 15 for MR imaging of caspase-3 activity in vivo was performed in nude mice bearing subcutaneous HeLa tumors. Tumors were implanted and grown for 10-15 days before receiving intratumoral injections of two doses of 0.2 mg doxorubicin separated by 2 days. Probe 15 or 1-ctrl (19) (0.1 mmol kg−1) was injected intravenously the day before treatment (baseline) and four days post-treatment (treated). Spin-echo T1-weighted multislice MR images at 1T were recorded before (pre-contrast) and every 4 min after contrast agent administration (post-contrast), and scanning was carried out for 4 h post-contrast for each mouse. Much brighter MR signals (T1 contrast) were observed 40 and 120 min after injection with probe 15 in treated tumors as compared to that in baseline tumors (
In contrast, there was no significant difference in SI enhancement during the time-course imaging (up to 4 h) between treated and baseline tumors after 1-ctrl (19) administration (n=4, p>0.05,
Accordingly, the disclosure provides embodiments of a novel caspase-3-activatable Gd-based MRI probe for imaging chemotherapy-induced tumor apoptosis in mice. This activatable
MRI probe undergoes intramolecular cyclization and subsequent self-assembly into GdNPs upon caspase-3 activation, resulting in enhanced r1 relaxivity (106%) and longer retention in apoptotic tumors. The use of small-size contrast agents to achieve higher r1 relaxivity value (29.3 mM−1 s−1) upon caspase-3 activation and significant SI enhancement in apoptotic tumor makes this an advantageous strategy for the high-resolution MR monitoring of cancer therapy response.
One aspect of the disclosure, therefore, encompasses embodiments of an activatable probe comprising a detachable capping moiety conjugated to a self-cyclizing molecule comprising a cysteine moiety, a 2-cyano-6-hydroxyquinoline moiety, an amino luciferin scaffold, and a detectable imaging moiety.
In embodiments of this aspect of the disclosure, the detachable capping moiety can be a peptide selectively cleavable from the cysteine by at least one peptidase.
In some embodiments of this aspect of the disclosure, the peptidase can be caspase-3, caspase-7, or both caspase-3 and caspase-7.
In some embodiments of this aspect of the disclosure, the detachable capping moiety has the amino acid sequence L-aspartate-glutamate-valine-aspartate.
In some embodiments of this aspect of the disclosure, the self-cyclizing composition has the formula I:
In some embodiments of this aspect of the disclosure, the detectable probe can be an optically detectable label, a detectable by positron electron transmission, or detectable by magnetic resonance imaging (MRI).
In some embodiments of this aspect of the disclosure, the detectable imaging moiety is a fluorophore.
In some embodiments of this aspect of the disclosure, the detectable imaging moiety detectable by positron electron transmission can be selected from the group consisting of: 11C, 13N, 15O, 17F, 18F, 75Br, 76Br, and 124I.
In some embodiments of this aspect of the disclosure, the activatable probe can further comprise a chelating agent and the detectable imaging moiety detectable by magnetic resonance imaging (MRI) can be gadolinium (Gd), thulium (Tm), or europium (Eu), or a combination thereof.
In some embodiments of this aspect of the disclosure, the activatable probe can further comprise a quenching moiety attached to the detachable capping moiety, wherein said quenching moiety is selected to quench the fluorescence from the fluorophore when the detachable capping moiety is conjugated to the self-cyclizing molecule.
In some embodiments of this aspect of the disclosure, the activatable probe can have the formula II, III or IV:
In embodiments of this aspect of the disclosure, in formula IV, M can be gadolinium (Gd), thulium (Tm), or europium (Eu), or a combination thereof.
In some embodiments of this aspect of the disclosure, the activatable probe can be admixed with a pharmaceutically acceptable carrier.
Yet another aspect of the disclosure encompasses embodiments of a nano-aggregation probe, wherein said nano-aggregation probe is an aggregate of an activated probe, wherein said activated probe comprises a self-cyclized molecule having the formula V:
and a detectable imaging moiety attached thereto.
In some embodiments of this aspect of the disclosure, the detectable imaging moiety can be an optically detectable label, detectable by positron electron transmission, or detectable by magnetic resonance imaging (MRI).
Still another aspect of the disclosure encompasses embodiments of a method of forming a nano-aggregation probe comprising delivering to an apoptotic cell a pharmaceutically acceptable composition comprising an activatable probe, wherein said activatable probe can comprise a detachable capping moiety conjugated to a self-cyclizing molecule, said self-cyclizing molecule comprising a cysteine moiety, a 2-cyano-6-hydroxyquinoline moiety, an amino luciferin scaffold, and a detectable imaging moiety, wherein the detachable capping moiety has the amino acid sequence L-aspartate-glutamate-valine-aspartate and is selectively cleavable from the self-cyclizing molecule by caspase 3/7, whereupon the activatable probe can enter the apoptotic cell, an apotopically-induced caspase 3/7 cleaves the detachable capping moiety from the activatable probe, and said probe aggregates to form the nano-aggregation probe. In some embodiments, the activatable probe can have the formula II, III, or IV:
In embodiments of this aspect of the disclosure, in formula IV, M can be, but is not limited to, gadolinium (Gd), thulium (Tm), or europium (Eu), or a combination thereof.
In some embodiments of this aspect of the disclosure, the detectable imaging moiety can be a fluorophore and the activatable probe can further comprise a quenching moiety attached to the detachable capping moiety, wherein said quenching moiety can be selected to quench the fluorescence from the fluorophore when the detachable capping moiety is conjugated to the self-cyclizing molecule.
In some embodiments of this aspect of the disclosure, the pharmaceutically acceptable composition further comprises a pharmaceutically acceptable carrier.
Still yet another aspect of the disclosure encompasses embodiments of a method of detecting an apoptotic cell, the method comprising the steps of: (i) delivering to the cytoplasm of an animal cell a pharmaceutically acceptable composition comprising an activatable probe, wherein said activatable probe comprises a detachable capping moiety conjugated to a self-cyclizing molecule, said self-cyclizing molecule comprising a cysteine moiety, a 2-cyano-6-hydroxyquinoline moiety, an amino luciferin scaffold, and a detectable imaging moiety, wherein the detachable capping moiety has the amino acid sequence L-aspartate-glutamate-valine-aspartate and is selectively cleavable from the self-cyclizing molecule by caspase 3/7, whereupon the activatable probe enters the apoptotic cell, an apotopically-induced caspase 3/7 cleaves the detachable capping moiety from the activatable probe, and said probe aggregates to form a nano-aggregation probe; and (ii) detecting the nano-aggregation probe, thereby determining that the animal cell recipient of the activatable probe is apoptotic.
In some embodiments of this aspect of the disclosure, the detectable imaging moiety is a fluorophore and step (ii) can further comprise irradiating the recipient cell with an incident excitation energy, optically detecting an emitted fluorescence, measuring the intensity of said emission, and optionally generating an image of the fluorescence.
In some embodiments of this aspect of the disclosure, the detectable imaging moiety is detectable by positron electron transmission and step (ii) can further comprise detecting the nano-aggregation probe by PET imaging.
In some embodiments of this aspect of the disclosure, the detectable imaging moiety is detectable by magnetic resonance imaging and step (ii) further comprises detecting the nano-aggregation probe by MRI imaging.
The specific examples below are to be construed as merely illustrative, and not limitative of the remainder of the disclosure in any way whatsoever. Without further elaboration, it is believed that one skilled in the art can, based on the description herein, utilize the present disclosure to its fullest extent. All publications recited herein are hereby incorporated by reference in their entirety.
It should be emphasized that the embodiments of the present disclosure, particularly, any “preferred” embodiments, are merely possible examples of the implementations, merely set forth for a clear understanding of the principles of the disclosure. Many variations and modifications may be made to the above-described embodiment(s) of the disclosure without departing substantially from the spirit and principles of the disclosure. All such modifications and variations are intended to be included herein within the scope of this disclosure, and the present disclosure and protected by the following claims.
The following examples are put forth so as to provide those of ordinary skill in the art with a complete disclosure and description of how to perform the methods and use the compositions and compounds disclosed and claimed herein. Efforts have been made to ensure accuracy with respect to numbers (e.g., amounts, temperature, etc.), but some errors and deviations should be accounted for. Unless indicated otherwise, parts are parts by weight, temperature is in ° C., and pressure is at or near atmospheric. Standard temperature and pressure are defined as 20° C. and 1 atmosphere.
Analytical TLC was performed with 0.25 mm silica gel 60F plates with fluorescent indicator (254 nm). Plates were visualized by ultraviolet light. The 1H and 13C NMR spectra were acquired on a Bruker 400 MHz magnetic resonance spectrometer.
Data for 1H NMR spectra are reported as follows: chemical shifts are reported as δ in units of parts per million (ppm) relative to chloroform-d (δ 7.26, s); multiplicities are reported as follows: s (singlet), d (doublet), t (triplet), q (quartet), dd (doublet of doublets), m (multiplet), or br (broadened); coupling constants are reported as a J value in Hertz (Hz); the number of protons (n) for a given resonance is indicated nH, and based on the spectral integration values.
MALDI-MS and High Resolution Mass spectrometric analyses were performed on a Dionex HPLC System (Dionex Corporation) equipped with a GP50 gradient pump and an inline diode array UV-Vis detector. A reversed-phase C18 (Phenomenax, 5 μm, 4.6×250 mm, 5 μm, or 21.2×250 mm) column was used in analysis and semi-preparation.
UV absorbance of the probe was recorded on Agilent 8453 UV detector. TEM micrographs were obtained on a JEM 1230 Electron Microscope. Flow cytometry analysis of cells was run on the BD FACScan analyzer. Fluorescent microscopy images were acquired on an Olympus inverted fluorescence microscope (IX2-UCB) equipped with a Nuance multispectral imaging camera. Relaxivity was measured at 1T (Bruker Icon, Bruker BioSpin Corp.), 1.5 and 3T (Signa HDx, GE Healthcare). Inductively-coupled plasma mass spectrometry (ICP-MS) analysis was performed on Nu Plasma AttoM high-resolution ICP-MS.
Starting from NH2-CBT, compound 1 was obtained as a white solid according to the methods reported previously (Ye et al., (2011) Angew. Chem. Int. Ed. 50: 2275-2279; Liang et al., (2010) Nat. Chem. 2: 54-60, incorporated herein by reference in their entireties).
1H NMR (400 MHz, CDCl3) δ 9.71 (s, 1H), 8.48 (s, 1H), 7.87 (d, J=9.0 Hz, 1H), 7.64 (d, J=7.5 Hz, 2H), 7.54 (m, 2H), 7.47 (d, J=7.2 Hz, 2H), 7.35-7.23 (m, 8H), 7.22-7.05 (m, 11H), 4.44 (m, 1H), 4.25 (d, J=6.9 Hz, 2H), 4.11-4.01 (m, 1H), 3.84 (m, 3H), 3.01 (m, 2H), 2.52 (m, 2H), 1.87 (s, br, 1H), 1.65 (m, 1H), 1.42 (m, 2H), 1.32 (s, 9H); 13C NMR (101 MHz, CDCl3) δ 171.87, 171.07, 157.30, 155.97, 148.56, 144.40, 144.01, 141.37, 139.00, 136.66, 135.18, 129.59, 128.20, 127.83, 127.18, 127.10, 125.13, 125.02, 121.40, 120.08, 113.20, 111.71, 80.70, 67.25, 66.71, 54.21, 54.12, 49.77, 49.56, 49.34, 49.13, 48.92, 48.70, 48.49, 40.33, 33.74, 31.39, 29.40, 28.70, 28.31, 22.68. MS: calcd. for C56H55N6O6S2 [(M+H)+]: 971.4; found MALDI-MS: m/z 971.
To a solution of 1 (0.3 mmol), tris(2-carboxyethyl) phosphine hydrochloride (TCEP, 0.3 mmol), and DIPEA (1.8 mmol) in 20 ml CH2Cl2/MeOH (1/1) under N2 at room temperature was added a solution of 2 (0.33 mmol) in MeOH dropwise, and the mixture was kept stirring at room temperature for a further 30 min. After the reaction was completed, the solvent was removed under vacuum, and the residue was dissolved in ethyl acetate (EA, 30 ml). The solution was washed with water (2×20 ml), brine, and dried with Na2SO4. After removal of EA, the residue was directly dissolved in 20% TFA/CH2Cl2, and the mixture was kept stirring at room temperature for another 1 h to completely deprotect the Boc and Trt groups. The solvent was removed, and cold Et2O (35 ml) was added to precipitate the intermediate. After centrifugation (2500 rpm), the precipitate was dissolved in MeOH, to which was added PySSEt (0.4 mmol), and continued reaction for another 20 min. After the reaction, MeOH was removed, and the residue was precipitated out with cold Et2O (35 ml), followed by purification with silica gel chromatography with eluent of CH2Cl2/MeOH (40/1 to 20/1) to afford compound 3 as light yellow foam.
1H NMR (400 MHz, DMSO-d6) δ 10.63 (s, 1H), 9.10 (d, J=7.5 Hz, 1H), 8.54 (s, 1H), 8.41 (m, 4H), 8.31 (t, J=5.6 Hz, 1H), 8.06 (d, J=8.9 Hz, 1H), 7.97 (d, J=9.3 Hz, 1H), 7.90 (d, J=8.5 Hz, 1H), 7.84 (d, J=7.5 Hz, 2H), 7.68 (d, J=9.1 Hz, 1H), 7.63 (d, J=7.4 Hz, 2H), 7.53 (dd, J=9.3, 2.6 Hz, 1H), 7.44 (d, J=2.6 Hz, 1H), 7.37 (t, J=7.4 Hz, 2H), 7.28 (m, 3H), 5.32 (t, J=9.3 Hz, 1H), 4.51 (dd, J=13.6, 7.4 Hz, 1H), 4.24 (d, J=6.9 Hz, 2H), 4.21-4.10 (m, 5H), 3.74-3.61 (m, 2H), 3.10-3.24 (m, 2H), 2.97 (m, 3H), 2.75 (q, J=8 Hz, 2H), 2.08-1.96 (m, 2H), 1.70 (m, 3H), 1.41 (m, 3H), 1.25 (t, J=8 Hz, 3H). MS: calcd. for C50H52N9O6S4 [(M+H)+]: 1002.3; found ESI-MS: m/z 1002.7.
A solution of 3 (0.1 mmol), Ac-Asp(OtBu)-Glu(OtBu)-Val-Asp(OtBu)-COOH (1.05 equiv.), HBTU (1.1 equiv.), and DIPEA (2.0 equiv.) in dry THF (20 ml) was kept stirring at room temperature for 2-3 h. After the reaction was completed, THF was removed. The residue was purified with a short silica gel column with the eluent of CH2Cl2/MeOH (15/1), which was followed by deprotection of the Fmoc-group with 5% piperidine in DMF at room temperature for 10 min. The reaction was quenched with 1 N HCl, and purified by HPLC to furnish compound 4 after lyophilization (combined yield of 43% for two steps).
1H NMR (400 MHz, DMSO-d6) δ 10.42 (s, 1H), 8.60 (dd, J=7.9, 1.8 Hz, 1H), 8.43 (d, J=8.5 Hz, 2H), 8.31 (m, 2H), 8.19 (m, 2H), 8.06 (d, J=8.9 Hz, 1H), 8.01-7.86 (m, 3H), 7.80-7.60 (m, 5H), 7.53 (dd, J=9.3, 2.7 Hz, 1H), 7.45 (d, J=2.1 Hz, 1H), 5.31 (t, J=9.2 Hz, 1H), 4.62-4.47 (m, 3H), 4.42 (s, br, 1H), 4.32 (s, br, 1H), 4.19 (t, J=6.1 Hz, 2H), 4.14-4.02 (m, 1H), 3.84-3.61 (m, 10H), 3.06 (m, 1H), 2.99-2.90 (m, 1H), 2.81-2.73 (m, 2H), 2.69 (m, 2H), 2.59 (dd, J=15.9, 5.3 Hz, 1H), 2.44-2.35 (m, 1H), 2.13 (m, 2H), 2.02 (m, 2H), 1.92-1.79 (m, 5H), 1.67 (s, br, 2H), 1.54 (m, 2H), 1.46-1.26 (m, 29H), 1.21 (t, J=8.0 Hz, 3H), 0.84-0.68 (m, 6H). 13C NMR (101 MHz, DMSO-d6) δ 172.44, 171.66, 171.44, 171.29, 171.03, 170.20, 170.06, 169.96, 169.80, 164.89, 159.84, 159.38, 159.14, 158.81 (TFA), 149.33, 144.30, 138.74, 137.20, 136.96, 131.38, 131.00, 130.58, 125.38, 124.87, 124.79, 120.37, 118.60, 112.15, 106.86, 80.92, 80.77, 80.20, 79.96, 66.78, 63.74, 58.27, 54.06, 53.06, 52.46, 50.38, 50.13, 41.27, 39.35, 37.99, 36.71, 35.27, 32.26, 31.90, 31.28, 29.12, 28.31, 27.86, 27.30, 23.15, 23.02, 19.76, 18.72, 14.93. MS: calcd. for C67H94N13O15S4 [(M+H)+]: 1448.6; found MALDI-MS: m/z 1449.1.
Compound 4 was deprotected using a solution of TFA/CH2Cl2/TIPSH (95/2.5/2.5) at room temperature for 3 h. After the solvent was removed, cold Et2O was added, and the precipitate was dried under vacuum to give compound 5 in 83% yield without further purification.
1H NMR (400 MHz, DMSO-d6) δ 10.37 (s, 1H), 8.59 (d, J=9.7 Hz, 1H), 8.43 (d, J=8.0 Hz, 2H), 8.36-8.13 (m, 4H), 8.12-7.86 (m, 5H), 7.66 (m, 5H), 7.53 (d, J=9.2 Hz, 1H), 7.46 (s, 1H), 5.30 (t, J=9.0 Hz, 1H), 4.66-4.27 (m, 5H), 4.18 (s, br, 2H), 4.13-4.04 (m, 1H), 3.36 (m, 3H), 3.15-3.02 (m, 1H), 2.96 (m, 1H), 2.85-2.64 (m, 5H), 2.56 (m, 2H), 2.44 (m, 1H), 2.16 (m, 2H), 2.09-1.63 (m, 11H), 1.54 (s, br, 2H), 1.37 (m, 2H), 1.21 (t, J=6.9 Hz, 3H), 0.77 (m, 6H); 13C NMR (101 MHz, DMSO) δ 174.81, 172.40, 172.36, 171.82, 171.70, 171.42, 170.31, 169.81, 164.92, 159.87, 159.39, 149.32, 144.30, 138.72, 137.22, 136.99, 131.39, 131.01, 130.58, 125.40, 124.89, 124.81, 120.39, 118.62, 112.18, 106.87, 79.94, 66.76, 58.39, 54.10, 53.19, 52.65, 50.48, 50.29, 39.38, 36.70, 36.64, 36.48, 35.30, 32.28, 31.75, 31.11, 30.73, 29.11, 27.51, 27.30, 23.17, 23.05, 19.76, 18.71, 14.96. MS: calcd. for C55H70N13O15S4 [(M+H)+]: 1280.4; found MALDI-MS: m/z 1280.8.
To a solution of 5 (4 mg) in dry DMF (0.3 ml) was added Cy5.5-mono NHS ester (1.5 mg) and DIPEA (5 μl), and the mixture was kept stirring at room temperature further for 1 h. After the reaction was completed, the mixture was purified by HPLC to afford C-SNAF in 53% yield. >99% purity after purification. MS: calcd. for C66H112N15O28S8 [(M+H)+]: 2178.6; found MALDI-MS: m/z 2178.7.
A solution of 1 (0.3 mmol), 6 (0.33 mmol), tris(2-carboxyethyl) phosphine hydrochloride (TCEP, 0.3 mmol), and DIPEA (1.8 mmol) in 20 ml CH2Cl2/MeOH (1/1) was stirred at room temperature for 30 min. After the reaction was completed, the solvent was removed under vacuum, and the residue was dissolved in ethyl acetate (EA, 30 ml). The solution was washed with water (2×20 ml), brine, and dried with Na2SO4. After removal of EA, the residue was directly dissolved in 20% TFA/CH2Cl2, and the mixture was kept stirring at room temperature for another 1 h to completely deprotect the Boc and Trt groups. The solvent was removed, and cold Et2O (35 ml) was added to precipitate the intermediate. After centrifugation (2500 rpm), the precipitate was dissolved in MeOH, to which was added PySSEt (0.4 mmol), and continued reaction for another 20 min. After the reaction, MeOH was removed, and the residue was precipitated out with cold Et2O (35 ml), followed by purified with silica gel chromatography with eluent of CH2Cl2/MeOH (30/1 to 15/1) to afford compound 7 as light yellow foam.
1H NMR (400 MHz, DMSO-d6) δ 10.64 (s, 1H), 9.13 (d, J=7.3 Hz, 1H), 8.94 (d, J=4.3 Hz, 1H), 8.63 (d, J=8.3 Hz, 1H), 8.54 (s, 1H), 8.44 (s, br, 2H), 8.34 (t, J=5.5 Hz, 1H), 8.06 (dd, J=9.0, 2.3 Hz, 2H), 7.83 (d, J=7.5 Hz, 2H), 7.75 (m, 1H), 7.62 (m, 4H), 7.53 (d, J=2.5 Hz, 1H), 7.36 (t, J=7.4 Hz, 2H), 7.28 (m 3H), 5.33 (t, J=9.2 Hz, 1H), 4.51 (m, 1H), 4.31-4.07 (m, 6H), 3.79-3.60 (m, 2H), 3.18 (m, 2H), 2.98 (m, 2H), 2.74 (m, 2H), 2.13-1.95 (m, 2H), 1.75 (m, 2H), 1.54-1.24 (m, 6H), 1.24 (t, J=7.2 Hz, 3H); 13C NMR (101 MHz, DMSO) δ 171.30, 169.80, 167.60, 164.92, 159.88, 159.52, 159.19 (TFA), 158.29, 156.76, 149.38, 145.20, 144.55, 141.37, 141.03, 138.71, 138.46, 136.95, 130.47, 128.23, 127.67, 126.34, 125.92, 125.76, 124.91, 122.69, 120.76, 120.41, 112.24, 107.49, 79.96, 66.73, 65.87, 54.63, 51.86, 47.41, 39.54, 36.72, 35.30, 32.34, 31.93, 29.74, 29.14, 23.34, 14.76. MS: calcd. for C49H53N8O6S4 [(M+H)+]: 977.3; found ESI-MS: m/z 978.1.
A solution of 7 (0.1 mmol), Ac-Asp(OtBu)-Glu(OtBu)-Val-Asp(OtBu)-COOH (1.05 equiv.), HBTU (1.1 equiv.), and DIPEA (2.0 equiv.) in dry THF (20 ml) was kept stirring at room temperature for 2-3 h. After the reaction was completed, THF was removed. The residue was purified with a short silica gel column with the eluent of CH2Cl2/MeOH (15/1), which was followed by deprotection of the Fmoc-group with 5% piperidine in DMF at room temperature for 10 min. The reaction was quenched with 1 N HCl, and purified by HPLC to furnish compound 8 after lyophilization (51% yield in two steps).
1H NMR (400 MHz, DMSO-d6) δ 10.43 (s, 1H), 8.90 (d, J=4.7 Hz, 1H), 8.64-8.52 (m, 2H), 8.46 (m, 1H), 8.31 (m, 2H), 8.21 (m, 2H), 8.10-7.91 (m, 3H), 7.89-7.62 (m, 6H), 7.56 (dd, J=9.2, 2.5 Hz, 1H), 7.51 (d, J=2.3 Hz, 1H), 5.31 (t, J=9.2 Hz, 1H), 4.54 (m, 3H), 4.42 (s, br, 1H), 4.34 (m, 1H), 4.17 (t, J=6.1 Hz, 2H), 4.13-4.06 (m, 1H), 3.78-3.58 (m, 2H), 3.47 (t, J=5.3 Hz, 1H), 3.15-3.03 (m, 1H), 2.95 (m, 1H), 2.84-2.64 (m, 5H), 2.60 (dd, J=15.8, 5.1 Hz, 1H), 2.48-2.35 (m, 2H), 2.24-2.08 (m, 2H), 2.02 (m, 2H), 1.95-1.76 (m, 6H), 1.70 (s, br, 2H), 1.55 (m, 2H), 1.50-1.26 (m, 30H), 1.25-1.17 (m, 3H), 0.75 (m, 6H); 13C NMR (101 MHz, DMSO) δ 172.44, 171.67, 171.46, 171.30, 171.04, 170.23, 170.08, 169.96, 169.81, 164.89, 159.82, 159.77, 159.44, 159.10, 158.76 (TFA), 158.11, 149.32, 145.79, 140.09, 139.48, 138.76, 136.96, 130.35, 127.15, 125.41, 124.86, 122.63, 120.38, 118.59, 115.66, 112.16, 107.45, 80.98, 80.91, 80.80, 80.76, 80.18, 79.96, 72.95, 66.69, 60.93, 58.31, 54.10, 53.09, 52.49, 50.41, 50.25, 50.17, 41.29, 39.33, 37.99, 37.88, 36.73, 35.28, 32.27, 31.91, 31.80, 31.27, 29.17, 28.33, 28.30, 27.85, 27.29, 23.13, 23.04, 19.76, 18.72, 14.91. MS: calcd. for C66H95N12O15S4 [(M+H)+]: 1423.6; found MALDI-MS: m/z 1424.2.
Compound 8 was deprotected using a solution of TFA/CH2Cl2/TIPSH (95/2.5/2.5) at room temperature for 3 h. After the solvent was removed, cold Et2O was added. The precipitate was dissolved in MeOH, to which was added TCEP (1.1 equiv.), and the solution stirred at room temperature for 10 min. NaHCO3 was added into the solution to adjust the pH value to 7, then the free thiol group was methylated with MeI (5 equiv.) at room temperature. for 2 h. The mixture was purified by HPLC to afford compound 9 (72% yield in two steps).
1H NMR (400 MHz, DMSO-d6) 1H NMR (400 MHz, DMSO) δ 10.41 (s, 1H), 8.89 (d, J=4.7 Hz, 1H), 8.63-8.52 (m, 2H), 8.48 (d, J=7.5 Hz, 1H), 8.32 (m, 2H), 8.21 (d, J=7.5 Hz, 1H), 8.07 (d, J=8.9 Hz, 1H), 7.99 (m, 2H), 7.80-7.61 (m, 5H), 7.60-7.47 (m, 2H), 5.31 (t, J=9.1 Hz, 1H), 4.63-4.47 (m, 5H), 4.42 (m, 1H), 4.28 (m, 1H), 4.17 (t, J=5.9 Hz, 2H), 4.12-4.06 (m, 1H), 3.68 (m, 2H), 2.82-2.72 (m, 3H), 2.72-2.50 (m, 3H), 2.46-2.40 (m, 1H), 2.18 (m, 2H), 2.11-1.96 (m, 4H), 1.90 (m, 2H), 1.84-1.61 (m, 5H), 1.53 (m, 2H), 1.38 (m, 2H), 0.76 (m, 6H).
To a solution of 9 (4 mg) in dry DMF (0.3 ml) was added Cy5.5-mono NHS ester (1.5 mg) and DIPEA (5 μl), and the mixture was kept stirring at room temperature further for 1 h. After the reaction was completed, the mixture was purified by HPLC to afford L-ctrl in 51% yield. >99% HPLC purity. MS: calcd. For C94H110N14O28S7 [(M+H)+]: 2107.6; found MALDI-MS: 2108.5.
Starting from compound 7, 10 was synthesized according to the methods as described for compound 9 with replacement of Ac-Asp(OtBu)-Glu(OtBu)-Val-Asp(OtBu)-COOH with Ac-D-Asp(OtBu)-D-Glu(OtBu)-D-Val-D-Asp(OtBu)-COOH.
1H NMR (400 MHz, DMSO-d6) δ 10.23 (s, 1H), 8.86 (d, J=4.3 Hz, 1H), 8.64-8.53 (m, 2H), 8.48 (m, 1H), 8.36 (d, J=6.3 Hz, 1H), 8.29 (s, br, 1H), 8.22 (d, J=7.7 Hz, 1H), 8.13-7.91 (m, 4H), 7.66 (m, 5H), 7.58-7.43 (m, 2H), 5.31 (t, J=9.2 Hz, 1H), 4.59-4.48 (m, 2H), 4.46-4.36 (m, 2H), 4.26 (m, 1H), 4.19-4.11 (m, 4H), 3.68 (m, 2H), 3.28 (m, 1H), 2.82-2.55 (m, 6H), 2.47-2.40 (m, 1H), 2.20 (m, 2H), 2.07 (s, 3H), 2.03-1.89 (m, 3H), 1.81 (s, 3H), 1.75-1.63 (m, 2H), 1.53 (d, J=6.5 Hz, 2H), 1.36 (s, 2H), 0.79 (m, 6H). MS: calcd. for C63H69N12O15S3 [(M+H)+]: 1209.4; found MALDI-MS: m/z 1209.8.
To a solution of 10 (3 mg) in dry DMF (0.3 ml) was added Cy5.5-mono NHS ester (1.1 mg) and DIPEA (5 μl), and the mixture was kept stirring at room temperature for further 1 h. After the reaction was completed, the mixture was purified by HPLC to afford D-ctrl in 47% yield (>99% HPLC purity after purification). MS: calcd. For C94H110N14O28S7 [M+]: 2106.6; found MALDI-MS: 2106.2.
Compound 1 was dissolved in 5% piperidine/DMF to completely remove Fmoc group. The reaction was then quenched with 1N HCl, and purified by HPLC to afford compound 11 as a white powder after lyophilization.
1H NMR (400 MHz, CD3OD) δ 8.60 (s, 1H), 7.99 (d, J=9.0 Hz, 1H), 7.77 (d, J=8.9 Hz, 1H), 7.34 (m, 6H), 7.26 (m, 6H), 7.20 (m, 3H), 4.55 (dd, J=9.6, 4.3 Hz, 1H), 3.96 (t, J=6.8 Hz, 1H), 2.88-2.76 (m, 2H), 2.54 (m, 2H), 2.05 (s, br, 1H), 1.83-1.24 (m, 14H); 13C NMR (101 MHz, DMSO-d6) δ 171.57, 171.18, 159.52, 159.18, 155.79, 148.43, 144.93, 139.83, 137.28, 135.77, 129.65, 128.71, 127.44, 125.40, 121.63, 118.63, 115.70, 114.19, 112.21, 79.26, 66.61, 54.16, 54.02, 34.44, 31.74, 28.73, 27.29, 23.00. MS: calcd. for C41H45N6O4S2 [(M+H)+]: 749.3; found LC-MS: m/z 749.7.
To a solution of 11 (0.1 mmol) from last step, tris(2-carboxyethyl) phosphine hydrochloride (TCEP, 0.1 mmol), and DIPEA (0.6 mmol) in 15 ml CH2Cl2/MeOH (1/1) under N2 at room temperature was added a solution of 2 (0.12 mmol) in MeOH dropwise, and the mixture was kept stirring at room temperature for further 30 min. After the reaction was completed, the solvent was removed under vacuum, and the residue was purified by HPLC to afford compound 12 as a light yellow powder after lyophilization.
1H NMR (400 MHz, DMSO-d6) δ 10.20 (s, 1H), 8.53 (s, 1H), 8.42 (d, J=8.6 Hz, 1H), 8.31 (m, 2H), 8.06 (d, J=9.0 Hz, 1H), 7.98 (d, J=9.2 Hz, 1H), 7.91 (d, J=8.5 Hz, 1H), 7.78 (s, br, 3H), 7.66 (d, J=8.8 Hz, 1H), 7.53 (dd, J=9.3, 2.7 Hz, 1H), 7.45 (d, J=2.7 Hz, 1H), 7.35-7.24 (m, 15H), 7.13 (d, J=7.3 Hz, 1H), 5.31 (t, J=9.2 Hz, 1H), 4.38 (m, 1H), 4.18 (t, J=6.1 Hz, 4H), 4.01 (m, 1H), 3.76-3.62 (m, 2H), 2.69 (m, 2H), 2.32 (d, J=6.8 Hz, 2H), 2.09-1.94 (m, 2H), 1.80 (s, 1H), 1.67-1.49 (m, 3H), 1.29 (m, 11H); 13C NMR (101 MHz, DMSO-d6) δ 171.29, 171.18, 169.75, 164.88, 159.91, 159.38, 155.84, 144.91, 144.30, 137.19, 136.89, 131.38, 131.00, 130.58, 129.74, 129.62, 128.94, 128.75, 127.47, 125.40, 124.87, 124.81, 118.62, 112.30, 106.86, 79.95, 79.30, 66.76, 66.61, 54.19, 53.90, 39.28, 36.70, 35.27, 34.27, 31.71, 29.09, 28.74, 27.33, 23.00. MS: calcd. for C57H60N9O6S3 [(M+H)+]: 1062.4; found ESI-MS: m/z 1062.5.
To a solution of 12 (3 mg) in dry DMF was added ALEXA FLUOR® 488 5-TFP ester (1 mg) and DIPEA (2 μL), and the mixture was kept stirring at room temperature for 2 h. After the reaction, cold Et2O was added to precipitate the product, which was directly dissolved in a solution of TFA/TIPSH/DCM (25%/72.5%/2.5%) for 1 h. The solvent was removed, and the residue was precipitated with cold Et2O, following by reaction with PySSEt in MeOH to afford SIM-1 after purification by HPLC (52% yield from ALEXA FLUOR® 488 5-TFP ester). MS: calcd. for C56H53N11O14S6 [M+]: 1295.2; found MALDI-MS: m/z 1295.7.
SIM-1 from last step was dissolved in a solution of CH3CN/H2O (1/1), to which was added TCEP and MeI. The pH value of the reaction solution was adjusted to 6 with NaHCO3, and the reaction was kept stirring at room temperature for another 2 h, following by purification with HPLC to produce SIM-ctrl (83% yield). MS: calcd. for C55H51KN11O14S5 [(M+K+]: 1288.2; found MALDI-MS: m/z 1289.2.
To a solution of 5 (3 mg) in dry DMF was added Alexa Fluor 488 5-TFP ester (1 mg) and DIPEA (2 μL), and the mixture was kept stirring at room temperature for 2 h. After the reaction was completed, the mixture was purified by HPLC to afford C-SNAF-SIM in 42% yield based on Alexa Fluor 488 5-TFP ester. MS: calcd. For C78H80N15NaO25S6 [M+Na]+:1817.4; found MALDI-MS: 1817.2.
Caspase (human, recombinant from E. coli) assays were performed for caspase-3 (4.9×10−3 U; 7.35×10−4 mg, Sigma), −7 (18.3 U; 7.35×104 mg, Calbiochem), and −9 (0.3 U; 7.35×10−4 mg, Calbiochem). All caspase assays were conducted in caspase buffer with 50 mM HEPES, 100 mM NaCl, 1 mM EDTA, 10 mM TCEP, 10% glycerol, and 0.1% CHAPS at pH 7.4. Cathepsin B (human liver; 0.27 U; 7.35×10−4 mg, Calbiochem) and Legumain (human, recombinant from mouse myeloma cell line; >250 pmol/min/μg; 7.35×10−4 mg, R&D Systems) were conducted in reaction buffer with 50 mM sodium acetate, 50 mM NaCl, 0.5 mM EDTA and 10 mM TCEP at pH 5.5. C-SNAF was diluted in the respective enzyme reaction buffer (25 μM, 1 mL) and remained at room temperature for 10 min, to which was then added the respective enzymes. Reactions were performed at 37° C., and monitored by HPLC hourly. The percentage conversion of the reaction was calculated based on the percentage of peak area of C-SNAF-cycl in the HPLC trace at 675 nm UV detection, which indicated the efficacy of enzyme cleavage of C-SNAF.
HeLa (or MDA-MB-231) cells in #1.5 borosilicate 8-well chambered coverslips (Nunc) with 70% confluence were either non-treated or treated with 2 μM STS for 4 h. After removal of the medium, the cells were incubated with C-SNAF, L-ctrl, or D-ctrl at 2 μM for 24 h. Some cells were first incubated with caspase inhibitor (Z-VAD-fmk, 50 μM) for 30 min, followed by incubating with 2 μM C-SNAF for 24 h. The cells were carefully washed with PBS (1×) three times, and stained with Hoechst 33342 (2 μM) at 37° C. for 30 min. After rinses with PBS (1×) several times, the medium was replaced and the fluorescence images were acquired with DAPI and Cy5.5 filters. The images were processed using the standard CRi Nuance software, analyzed using Image J software package (NIH), and presented at the same intensity scale for comparison.
HeLa cells on micro cover glass slides (22×22 mm) were either untreated or treated with STS (2 μM) for 4 h, following by incubation with C-SNAF-SIM (2 μM) for 24 h.
After removal of the medium, cells were carefully washed with PBS (1×) three times, fixed with 2% paraformaldehyde (PFA) at 37° C. for 10 min, washed with PBS a further three times and then permeabilized with 0.1% Triton X-100 at 37° C. for 10 min. After three further washes with PBS, the glass slides were mounted with mounting medium (with DAPI). The super-resolution images were acquired by 3D-SIM using a DeltaVision OMX imaging system (Applied Precision) with simultaneous excitation at 408 nm for DAPI and 488 nm for Alexa 488, according to the standard procedure in the manufacturer instructions. The structured illumination images were analyzed with an API DeltaVision OMX softWoRx image processing software and the size of self-assembling particles was analyzed using Image J software package.
To establish tumors in 6-week-old female nu/nu mice, 2×106 HeLa cells suspended in 50 μL of a 50% v/v mixture of Matrigel in supplemented DMEM (10% FBS, 1% penstrep) were injected subcutaneously in the shoulders of the mouse. Tumors were grown until a single aspect was 0.7 to 0.9 cm (approximately 10-15 days), and then treatment consisting of 8 mg/kg DOX or saline was initiated. Treatments were administered intravenously once every 4 d for a total of three times. Total mouse body weight and tumor size (width and length by caliper) was measured every other day. Tumor volumes were calculated assuming ellipsoid shape with the formula (l×w2)/2.
Two days following the final treatment, 5 nmol probe in saline was injected intravenously and fluorescence imaging began immediately on a Maestro hyperspectral fluorescent imaging system (PerkinElmer, MA, USA) using a 635±25 nm excitation filter and a 675 nm long-pass emission filter, with images acquired from 670 to 900 nm. Tissue autofluorescence and Cy5.5 fluorescence were deconvolved, and tumor fluorescence intensity was quantified by region of interest measurement using Nuance v.3.0.1.2 software (Perkin Elmer, MA, USA).
To a solution of N-Boc-propargylglycine (384 mg, 1.8 mmol) in THF (3 mL) was added to 4-methylmorpholine (330 mL, 3.0 mmol) and isobutyl chloroformate (195 mL, 1.5 mmol) at 0° C. The resulting mixture was stirred for 2 h at 0° C. 6-amino-2-cyanobenzothiazole (175 mg, 1.0 mmol) in THF (5 mL) was added to the reaction mixture at 0° C. The resulting solution was stirred for 12 h at room temperature. The reaction was quenched by adding aqueous 1 M HCl (3 mL). The resulting solution was partitioned with EtOAc (40 mL) and H2O (40 mL) and the organic phase was washed with water and aqueous NaHCO3 (40 mL). The combined organic phase was dried with MgSO4, filtered and evaporated under reduced pressure. The crude product was purified with silica gel chromatography (Hexane: EtOAc=1:1) to give the product compound 4 (296 mg, 85%).
1H-NMR (CDCl, 400 MHz) δ 9.45 (s, 1H), 8.44 (s, 1H), 7.85 (d, 1H, J=8.4), 7.27 (d, 1H, J=8.4), 5.82 (d, 1H, J=7.6), 4.57 (m, 1H), 2.75 (m, 2H), 2.11 (t, 1H, J=2.4), 1.45 (s, 9H); 13C-NMR (CDCl3, 100 MHz) δ 170.1, 156.6, 148.5, 138.5, 136.6, 135.3, 125.2, 120.8, 113.2, 111.4, 81.6, 78.8, 72.5, 54.1, 28.6, 22.4; ESI-MS calcd for C18H19N4O3S+ ([M+H]+) 371.43, found 371.20.
To a solution of the compound 4 (300 mg, 0.81 mmol) in DCM (3 mL) was added anhydrous TFA (3 mL) at room temperature. The resulting solution was stirred for 1 h and then the solvent was evaporated under reduced pressure. The remaining TFA in crude product was removed under vacuum. Dried crude product was dissolved in DMF (5 mL) and N-Boc-S-Trt-D-cysteine (394 mg, 0.85 mmol), HBTU (323 mg, 0.85 mmol) and DIPEA (442 mL, 2.5 mmol) was added at room temperature. The resulting solution was stirred for 1 h and diluted with EtOAc (30 mL). The resulting organic solution was washed with water (40 mL) and brine (40 mL×2). The combined organic phase was dried with MgSO4, filtered and evaporated under reduced pressure. The crude product was purified with silica gel chromatography (Hexane: EtOAc=1:1) to give the dipeptide 5 (464 mg, 80%).
1H-NMR (CDCl, 400 MHz) δ 9.12 (s, 1H), 8.66 (s, 1H), 8.00 (d, 1H, J=8.8), 7.71 (d, 1H, J=8.8), 7.42 (d, 6H, J=7.2), 7.23-7.34 (m, 9H), 6.57 (d, 1H, J=8.4), 5.02 (d, 1H, J=5.2), 4.70 (m, 1H), 3.23 (m, 1H), 3.02-3.08 (m, 1H), 2.93 (dd, 1H, J=13.2, 8.4), 2.62-2.69 (m, 2H), 2.02 (t, 1H, J=2.4), 1.40 (s, 9H); 13C-NMR (CDCl, 100 MHz) δ 171.5 168.6, 156.1, 149.0, 144.3, 138.6, 136.8, 135.5, 129.7, 128.5, 127.4, 125.2, 121.6, 113.3, 112.0, 81.4, 78.9, 72.5, 67.8, 54.9, 52.2, 33.3, 28.5, 21.4; ESI-MS calcd for C40H37N5NaO4S2 ([M+Na]+) 738.22, found 738.19.
To a solution of the compound 5 (143 mg, 0.2 mmol) in DMF (5 mL) was added the quinolone 6a 1 (89 mg, 0.2 mmol), TCEP.HCl (115 mg, 0.4 mmol) and DIPEA (418 mL, 2.4 mmol). The resulting solution was stirred for 30 min and then the solvent was evaporated under reduced pressure. To remove both N-Boc and S-Trt group, the crude product was dissolved in DCM:TFA:TIPS (1:1:0.05) mixture and the resulting solution was stirred at room temperature. After 1 h, the solvent was evaporated under reduced pressure and the remaining TFA was further removed under vacuum. The dried product was re-dissolved in MeOH (5 mL) and 2-(ethyldisulfanyl)pyridine (68 mg, 0.4 mmol) was added. The resulting solution was stirred for 2 h at room temperature. The crude product was purified with preparative HPLC to give the desired product 7a (88 mg, 51% from 5).
1H-NMR (CD OD, 400 MHz) δ 8.30 (d, 1H, J=2.0), 8.12 (d, 1H, J=8.8), 7.86 (d, 1H, J=8.8), 7.78 (d, 1H, J=9.2), 7.61 (d, 1H, J=8.8), 7.51 (dd, 1H, J=9.2, 2.4), 7.39 (dd, 1H, J=9.2, 2.4), 7.15 (d, 1H, J=2.4), 5.30 (t, 1H, J=9.2), 4.77 (t, 1H, J=7.2), 4.32 (dd, 1H, J=8.8, 4.8), 4.12-4.18 (m, 2H), 3.68-3.78 (m, 2H), 3.64 (m, 1H), 3.48 (m, 1H), 3.35 (dd, 1H, J=14.4, 4.8), 3.09 (dd, 1H, J=14.4, 8.8), 2.76-2.93 (m, 4H), 2.52 (t, 1H, J=2.4), 2.04-2.18 (m, 2H), 1.37 (t, 1H, J=7.6); 13C-NMR (CD OD, 100 MHz) δ 172.7, 170.4, 168.8, 167.2, 160.9, 160.5, 150.6, 145.2, 138.9, 137.9, 137.5, 131.8, 131.6, 131.4, 126.0, 125.3, 125.0, 121.0, 118.9, 113.0, 106.9, 80.6, 79.9, 73.1, 67.5, 54.7, 53.3, 39.8, 37.9, 35.9, 32.9, 29.3, 22.9, 14.6; MALDI-TOF calcd. for C34H34N8NaO4S4+ ([M+Na]+) 769.934, found 770.139.
To a solution of the compound 5 (72 mg, 0.1 mmol) in DMF (3 mL) was added the quinolone 6b 1 (42 mg, 0.1 mmol), TCEP.HCl (58 mg, 0.2 mmol) and DIPEA (209 mL, 1.2 mmol). The resulting solution was stirred for 30 min and then the solvent was evaporated under reduced pressure. The crude product was dissolved in DCM:TFA:TIPS (1:1:0.05) solution to remove both N-Boc and S-Trt group, and then the resulting solution was stirred at room temperature. After 1 h, the solvent was evaporated under reduced pressure and the remaining TFA was removed under vacuum. The dried product was re-dissolved in MeOH (3 mL) and 2-(ethyldisulfanyl)pyridine (34 mg, 0.2 mmol) was added. The resulting solution was stirred for 1 h at room temperature. The crude product was purified with preparative HPLC to give the desired product 7b (33 mg, 40% from 5).
1H-NMR (CD OD, 400 MHz) δ 8.87 (dd, 1H, J=5.6, 1.6), 8.75 (d, 1H, J=8.8), 8.23 (d, 1H, J=1.6), 7.99 (d, 1H, J=8.8), 7.82-7.87 (m, 2H), 7.64 (dd, 1H, J=9.2, 2.8), 7.55 (dd, 1H, J=8.8, 2.0), 5.33 (t, 1H, J=9.2), 4.73 (t, 1H, J=7.6), 4.35 (dd, 1H, J=8.4, 4.8), 4.12-4.25 (m, 2H), 3.74 (d, 2H, J=9.2), 3.65 (m, 1H), 3.47 (m, 1H), 3.35 (dd, 1H, J=14.4, 4.8), 3.12 (dd, 1H, J=14.4, 8.0), 2.76-2.88 (m, 4H), 2.54 (t, 1H, J=2.4), 2.06-2.22 (m, 2H), 1.36 (t, 1H, J=7.2); MALDI-TOF calcd for C33H36N7O4S4+ ([M+H]+) 722.943, found 722.770.
The protected caspase-3 substrate (Ac-DEVD-OH) was prepared by solid phase peptide synthesis. MALDI-TOF calcd. for C32H54N4NaO12 ([M+Na]+) 709.364, found 709.007.
The peptide 8b (Ac-devd-OH), control peptide probe, was prepared by using D-amino acids. MALDI-TOF calcd. for C32H54N4NaO12 ([M+Na]+) 709.364, found 709.213.
To a solution of 7a (15 mg, 17.4 mmol) in THF (2 mL) was added 8a (18 mg, 26.1 mmol), HBTU (10 mg, 26.4 mmol) and DIPEA (16 mL, 87 mmol). The resulting solution was stirred for 1 h at room temperature and then it was diluted with EtOAc (30 mL). The resulting organic solution was washed with brine (30 mL×2). The combined organic phase was dried with MgSO4, filtered and evaporated under reduced pressure. To remove t-Bu groups, the resulting product was dissolved in DCM:TFA:TIPS (1.0:1.0:0.05) solution. After 1 h, the solvent was evaporated under reduced pressure and the crude product was purified with preparative HPLC to give the probe 3a (15 mg, 12.0 mmol, 69% from 7a). MALDI-TOF calcd. for C54H63N12O15S4 ([M+H]+) 1248.409, found 1248.735.
To a solution of 7b (13 mg, 15.6 mmol) in THF (1.5 mL) was added to 8b (22 mg, 31.2 mmol), HBTU (12 mg, 31.2 mmol) and DIPEA (13.5 mL, 78 mmol). The resulting solution was stirred for 1 h at room temperature. After the reaction was completed, the solvent was evaporated under reduced pressure. The crude product was purified with preparative HPLC to give 11 mg (7.9 mmol) of protected product. MALDI-TOF calcd for C65H88N11O15S4 ([M+H]+) 1391.718, found 1392.723.
The purified product (11 mg, 7.9 mmol) was dissolved in DMF (1 mL) and then TCEP.HCl (4.5 mg, 16 mmol), DIPEA (20 mL, 0.1 mmol) and methyl iodide (1.9 mL, 30 mmol) was added at room temperature. The resulting solution was stirred for 40 min and then the solvent was evaporated under reduced pressure. To remove t-Bu groups, the resulting product was dissolved in DCM:TFA:TIPS (1.0:1.0:0.05) solution. After 1 h, the solvent was evaporated under reduced pressure and the crude product was purified with preparative HPLC to give the control probe 3b (7 mg, 6.0 mmol, 38% from 7b). MALDI-TOF calcd. for C52H62N11O15S3 ([M+H]+) 1176.358, found 1176.431.
1H-NMR (CDCl, 400 MHz) δ 7.80 (d, 2H, J=8.4), 7.34 (d, 2H, J=8.4), 4.16 (t, 2H, J=4.8), 3.55-3.71 (m, 12H), 3.38 (t, 2H, J=5.2), 2.45 (s, 3H); 13C-NMR (CDCl, 100 MHz) δ 145.0, 133.2, 130.1, 128.2, 71.0, 70.9, 70.8, 70.3, 69.5, 68.9, 50.9, 21.9; ESI-MS calcd. for C15H24N3O6S+ ([M+H]+) 374.14, found 374.18.
HeLa human cervical adenocarcinoma epithelial cells and MDA-MB-231 human breast adenocarcinoma epithelial cells from the ATCC were cultured in Dulbecco's modified eagle medium (GIBCO) supplemented with 10% fetal bovine serum (FBS, GIBCO), 100 U mL−1 penicillin and 100 μg mL−1 streptomycin (GIBCO). For CASPASE-GLO® 3/7 assays, HeLa and MDA-MB-231 cells were plated onto 96-well plates (Costar) and allowed to reach approximately 70% confluence. For epifluorescence microscopy experiments, cells were plated onto #1.5 borosilicate 8-well chambered coverslips (Nunc) and grown to approximately 70% confluence. For flow cytometry experiments, HeLa cells were plated onto 12-well clear plates and grown to approximately 70% confluence. For super-resolution microscopy experiments, HeLa cells were plated on micro cover glass (20×20 mm) and grown to approximately 70% confluence.
HeLa cells (approximately 4×106) were seeded onto cell culture dish. After cell growth to about 70% confluence, medium was removed and 8 ml of fresh medium containing a different concentration of STS (0, or 2 μM) was added to the dishes and incubated for 4 h (STS). Then, the medium was replaced with 8 ml of fresh medium with further incubation for 24 h. The medium was removed, trypsinized, centrifuged (1200 rpm), and washed with PBS twice. The obtained cell pellets were lysed with RIPA buffer (200 μl per dish), and the protein concentration was measured using Bradford assay with BSA as standard.
The caspase-3/7 activity in lysates were measured using the CASPASE-GLO® 3/7 assay (Promega) according to the standard protocol. In general, cell lysates were diluted in 100 μL of 2× Caspase buffer (100 mM HEPES, 200 mM NaCl, 2 mM EDTA, 20 mM TCEP, 20% glycerol, and 0.2% CHAPS, pH 7.4), to which 100 μL of CASPASE-GLO® 3/7 reagent was added to each solution. The mixture was gently mixed, and incubated in dark at room temperature for 1 h, followed by measuring luminescence (RLU) with a luminometer (Turner Biosystems) as directed by the luminometer manufacturer. Data were then background subtracted, normalized by ms of protein, and the caspase-3/7 activity was expressed as normalized luminescence per mg of protein.
HeLa tumor xenografted mice were treated with saline or 3× DOX (8 mg/Kg). After treatment, the mice were sacrificed, and the tumors were resected and lysed with RIPA buffer (1 g tissue/1 ml buffer). The solution was homogenized for 1 min on ice, three times. The lysed solution was kept on ice for another 30 min, and centrifuged at 14,000×g for 30 min at 4° C. The supernatant was collected, and the protein concentration was measured using Bradford assay with BSA as standard. The caspase-3/7 activity in the lysed solution was measured by CASPASE-GLO® 3/7 assay, and normalized to the protein concentration.
Adherent HeLa (or MDA-MB-231) cells (approximately 8×106) were either non-treated or treated with STS (2 μM) for 4 h (or 2 μM DOX for 24 h). After replacing the medium containing STS with blank medium, the cells were kept growing for another 24 h. The culture medium was carefully removed and the cells were washed with cold 1×PBS. The cells were trypsinized to form cell pellets, and RIPA (RadioImmuno Precipitation Assay, sigma) buffer was added to cells using 100 μL of buffer per 4×106 cells. Then the cells were kept on ice for 0.5 h. The cell lysate was gathered, centrifuged at 14,000×g for 15 min at 4° C. The supernatant of the cell lysate was collected, and the caspase-3/7 activity in the lysate was determined by CASPASE-GLO® 3/7 assay. The cell lysate was diluted with caspase reaction buffer (2×, 1:1 diluted), and incubated with C-SNAF (5 μM) at 37° C. overnight and then injected into an HPLC system (Dionex) for analysis.
Adherent HeLa cells (about 8×106) were either non-treated or treated with STS (2 μM) for 4 h. After replacing the medium containing STS with blank medium, the cells were kept growing for another 24 h. The culture medium was removed and the cells were washed with cold PBS (1×). The cells were trypsinized to form cell pellets, and RIPA® (RadioImmuno Precipitation Assay, Sigma, Inc.) buffer was added to cells using 200 μL of buffer per 4×106 cells. The cells were kept on ice for 0.5 h. The cell lysate was gathered, centrifuged at 14,000×g for 10 min at 4° C. The supernatant of the cell lysate was collected, and the caspase-3/7 activity in the lysate was determined by CASPASE-GLO® 3/7 assay. The cell lysate was diluted with caspase reaction buffer (2×, 1:1 diluted), and incubated with probe 15 (100 μM) at 37° C. overnight and then injected into an HPLC system (Dionex) for analysis.
HeLa cells in #1.5 borosilicate 8-well chambered coverslips (Nunc) were either incubated with C-SNAF (2 μM) alone or co-incubated with DOX (1, 2, and 5 μM) and 2 μM C-SNAF, 2 μM C-SNAF together with caspase inhibitor (Z-VAD-fmk, 50 μM), or control probes D-ctrl and L-ctrl at 2 μM for 24 h. Then the medium was removed, the cells were carefully washed with PBS (1×) three times, and stained with nuclear binding probe Hoechst 33342 (2 μM) at 37° C. for 30 min. After several rinses with PBS (1×), the medium was replaced and the fluorescence images were acquired with DAPI and FITC filters.
Approximately 105 HeLa cells in 1 mL DMEM medium were seeded onto 12-well plates. The following day, the medium was replaced with 500 μL fresh medium containing STS (0, and 2 μM). After 4 h incubation, the medium containing STS was removed, and the cells were kept growing for 0 or 24 h to induce different level of apoptosis. After gentle wash with PBS (1×), the cells were detached from the plates with trypsin (100 μL per well), and the cell pellets were collected after centrifugation at 2000 rpm at 4° C. for 2 min. After wash with PBS (1×), the pellets were resuspended in 300 μL PBS (1×), and stained with Alexa Fluor Annexin V and PI using the ALEXA FLUOR 488 ANNEXIN V/DEAD CELL APOPTOSIS® Kit (Invitrogen: V13241) for flow cytometry. For the FLICA staining experiment, the cell pellets were resuspended in 1× wash buffer, and stained with FLICA (FAM) and PI using the VYBRANT® FAM Caspase-3 and -7 Assay Kit (Invitrogen: V35118). All assays were performed according to the manufacturer instructions, and the cell population was analyzed by FACScan analyzer using FITC (Annexin V and FLICA) and PI channels. The cell number for each flow cytometry analysis was approximately 5×103 to 104, and the data was processed using FlowJo software.
For the DOX-induced apoptotic cells, HeLa cells in 12-well plates were treated with DOX (0, 1, and 5 μM) for 24 h, stained with Alexa Fluor Annexin V and PI or FLICA (FAM) and PI according to the aforementioned procedure, and applied for flow cytometry analysis.
Approximately 105 HeLa cells in 1 mL DMEM medium were seeded onto 12-well plates. The following day, the medium was replaced with 500 μL fresh medium containing STS (0, and 2 μM). After 4 h incubation, the medium containing STS was removed, and 500 μL fresh medium containing 2 μM C-SNAF, L-ctrl and D-ctrl was added to respective wells. For the inhibitor blocking experiment, the STS-treated cells were first incubated with the caspase inhibitor Z-VAD-fmk (50 μM, R&D Systems) for 30 min, and then 2 μM C-SNAF was added. All cells incubations were 24 h, followed by staining with FLICA (FAM) after trypsinization. After washing with PBS (1×) three times, the cell pellets were resuspended in 300 μL PBS and applied for flow cytometry analysis using the FITC and Cy5.5 channels. The cell number for each flow cytometry analysis was approximately 5000 to 10000, and the data was processed using FlowJo software.
For the DOX-induced apoptotic cells, HeLa cells in 12-well plates were co-incubated with DOX (5 μM) and 2 μM C-SNAF, L-ctrl and D-ctrl, or 2 μM C-SNAF together with 50 μM Z-VAD-fmk for 24 h. After washing with PBS (1×) three times, the cells pellets were resuspended in 300 μL PBS, and applied for flow cytometry analysis using the Cy5.5 channels. The cell number for each flow cytometry analysis was approximately 5×103 to 104, and the data was processed using FlowJo software.
Following fluorescence imaging studies at 4 h, tumor tissues were excised, frozen in Optimal Cutting Temperature medium (OCT) and sectioned into 10 μm slices. For active caspase-3 staining, the sections were fixed with cold acetone, blocked with avidin/biotin blocking kit and DAKO blocking, and immunostained with primary cleaved caspase-3 antibody (Asp175, 1:100, Cell signalling 9661) overnight at 4° C., followed by incubation for 30 min with biotinylated anti-rabbit IgG (1:300, Vector Labs) and 30 min with Cy3-conjugated streptavidin (1:300, Jackson ImmunoResearch). Then the sections were mounted in Vectashield mounting media containing DAPI (Vector Labs). The images were captured using an Olympus inverted fluorescence microscope (IX2-UCB) equipped with a Nuance multispectral imaging camera after excited and acquired at respective filters for DAPI, Cy3 and Cy5.5. The images were processed using the standard CRi Nuance software, analyzed using Image J software package (NIH), and showed at the same intensity scale for comparison.
Results are expressed as the mean±standard deviation unless otherwise stated. Statistical comparisons between two groups were determined by t-test, and between 3 or more groups by one-way ANOVA followed by a post-hoc Tukey's HSD test. Time course analysis between groups was performed by general linear model repeated-measures analysis. Correlation analyses were performed by one-tailed Spearman r (non-parametric). For all tests, p<0.05 was considered statistically significant. All statistical calculations were performed using GraphPad Prism v. 5 (GraphPad Software Inc., CA, USA).
Radiosynthesis:
All chemicals unless otherwise stated were commercially available and used without further purification. Purification of 10 was carried on a high-performance liquid chromatograph (HPLC) equipped with Dionex 680 pump (Dionex Corporation, USA) and KNAUER UV detector K-2001 (KNAUER, Germany) using a Phenomenex Gemini C18 column (250×10 mm, 5 μm) and gradient conditions (method A): A: H2O+0.1% TFA, B: CH3CN+0.1% TFA; 0-2 min 5% B, 2-30 min 5-65% B, 30-40 min 60-95% B; 5.0 mL/min.
1 and 1-D were purified on a Dionex Ultimate 3000 chromatography system with a UVD 340U absorbance detector (Dionex Corporation, USA) and model 105S single-channel radiation detector (Carroll & Ramsey Associates, USA) using a Phenomenex Gemini C18 column (250× mm, 5 μm) and gradient conditions: for 1 (method B), A: H2O+0.1% TFA, B: CH3CN+0.1% TFA; 0-2 min 10% B, 2-40 min 10-60% B, 40-50 min 95% B, 50-60 min 10% B; 5.0 mL/min; for 1-D (method C), A: H2O+0.1% TFA, B: CH3CN+0.1% TFA; 0-2 min 10% B, 2-40 min 10-40% B, 40-50 min 95% B, 50-60 min 10% B; 5.0 mL/min. Analytical HPLC were performed on an Agilent 1200 Series HPLC system (Agilent Technology, USA) with ChemStation software (version B.04.02) equipped with a quaternary pump, UV diode array detector and model 105S single-channel radiation detector using a Phenomenex Gemini C18 column (250×4.6 mm, 5 μm) and gradient conditions: for 1 (method D), A: H2O+0.1% TFA, B: CH3CN+0.1% TFA; 0-2 min 20% B, 2-25 min 20-80% B, 25-28 min 95% B, 28-32 min 20% B; 1.0 mL/min; for 1-D (method E), A: H2O+0.1% TFA, B: CH3CN+0.1% TFA; 0-2 min 10% B, 2-10 min 10-15% B, 10-25 min 15-25% B, 25-28 min 95% B, 28-32 min 10% B; 1.0 mL/min with UV chromatograms recorded at 214 and 254 nm. The identity of the 18F-labeled products was confirmed by comparison with the analytical HPLC retention time of their non-radioactive reference molecule or by co-injection before administration to animal.
10 was fully-automated synthesized in a Tracerlab FX-FN module (GE Healthcare, USA). Briefly, no-carrier added [18F]-fluoride was produced via the 18O(p,n)18F nuclear reaction by irradiation of enriched [18O]H2O in a PETtrace cyclotron (GE Healthcare, USA). [18F]Fluoride was trapped on an anion-exchange resin cartridge (Macherey-Nagel Chromafix 30-PS-HCO3 pre-conditioned with 1 mL of EtOH, 1 mL of H2O and then blown dry). The cartridge was eluted with a solution of Kryptofix K2.2.2® (15 mg) and potassium carbonate (3 mg) in H2O (0.1 mL) and CH3CN (0.9 mL). Following azeotropic drying, compound 9 (3.0 mg in 1.0 mL dry DMSO) was added to the K[18F]/K2.2.2. complex and the mixture was heated for 20 min at 110° C. to yield 10.
After cooling to room temperature, the reaction mixture was loaded on semi-prep HPLC (method A). The fraction corresponding to the peak of the desired product (retention time approximately 21 min) was collected in a round bottom flask containing sterile water (20 mL), and then transferred to an adjacent customized module for solid phase extraction (SPE) using a C-18 Sep-Pak. 10 trapped on C-18 cartridge was eluted with diethyl ether (2 mL) through a Na2SO4 cartridge into a 5 mL V-vial with stirrer bar in the customized module. The diethyl ether was removed under helium stream at ambient temperature and the dried labeling agent was reconstituted with THF (50 μL) for further click chemistry.
Click chemistry assisted by Cu(CH3CN)4PF6 and BPDS: To a solution of 10 in THF (50 mL) was added DMF solution (25 mL) of the active probe 3a (0.6 mg, 0.5 mmol), Cu(CH3CN)4PF6 (50 mL, 200 mM in MeCN) and BDPS (bathophenanthrolinedisulfonic acid disodium salt trihydrate, 100 mL, 50 mM in PB buffer, pH=7), and the reaction mixture was kept at 60° C. for 30 min. Crude product was diluted with 2 mL water and injected on semi-prep for purification (method B). The fraction corresponding to the peak of the desired product (retention time at approximately 26 min) was collected and diluted with 20 mL of water; this solution was loaded on the C-18 light cartridge and eluted out first with 1 mL saline/water (50/50) and then another 4 mL of saline. Both eluted solutions were combined as final product 1.
To a solution of 10 in THF (50 mL) was added 1 M HEPES solution (100 mL) of the active probe 3a (1.2 mg, 1 mmol), CuSO4 (300 mM, 10 μL) and sodium ascorbate (300 mM, 10 μL) and reaction mixture was kept at 40° C. for 20 min. Crude product was diluted with 2 mL of water and injected on semi-prep for purification (method B). Final product 1 was formulated in saline with 10% ethanol by SPE.
Click chemistry assisted by CuSO4 and sodium ascorbate: To a THF solution of 10 in THF (50 mL), 1 M HEPES/DMSO (=1:1) solution (50 mL) of the control probe 3b (0.5 mg, 0.4 mmol), CuSO4 (300 mM, 14 μL) and sodium ascorbate (300 mM, 14 μL) were added and reaction mixture was kept at 40° C. for 20 min. An acetonitrile solution of 11 (250 mM, 200 mL) was added into reaction mixture and kept at 40° C.; the reaction was monitored by checking an aliquot of reaction sample by analytical HPLC. When 3b was consumed based on HPLC chromatograph under UV 254 nm, crude product was diluted with 2 mL water and injected on semi-prep for purification (method D). Product fraction was eluted out at approximately 42 min and final product 1-D was formulated in saline with 10% ethanol by SPE.
HeLa cells (cultured in DMEM with 10% FBS and 1% ampicillin) were grown in a 6 well plate culture dish for 24 h. The wells were then divided into 3 groups. Group 1 wells were cultured normally for 24 h, then the medium was changed and the cells were cultured for another 24 h. Group 2 and 3 wells were cultured with 2 μM doxorubicin (DOX) for 24 h, then the medium was changed and the cells were cultured for another 24 h, group 2 in normal culture medium without doxorubicin and group 3 in normal culture medium without doxorubicin but together with 50 μM Z-VAD-FMK, a caspase-3 inhibitor.
After 48 h, 10 μCi (0.37 MBq) of 1 were added to all three groups and incubated for additional 4 h. Then the medium was removed, the cells washed 3 times with phosphate buffered saline, and 1 mL of Tryp-LETM Express was added and the cells were left for 1-2 min to allow to detach. The cell/Tryp-LE solution was counted in a gamma counter and the radioactivity was normalized to the protein concentration (determined by comparison with BSA standards in each vial.
In a second experiment following the same procedure, the cell/Tryp-LE solutions were placed in a veil and centrifuged at 1200×g for 2 min, the supernatant were removed and the pellets were homogenized with a sonicator (Bronson Sonifier 150) in 1 mL of MeOH. The supernatant was collected and analyzed on HPLC (method D for 1; method E for 1-D). The pellets and part of the MeOH supernatants were saved and counted for radioactive content. Parent 1 and 2 were run on HPLC as well for comparison.
HeLa cells were incubated with different concentrations of doxorubicin (0, 1, 2 and 5 μM) and the cell/Tryp-LE solution was centrifuge at 11,750×g for 5 min, the supernatant was removed and 1 mL/g Riba buffer (Sigma) was added. The cells were left for 15 min on ice and homogenized with a sonicator (Bronson Sonifier 150) and the suspension was analyzed for Caspase-3 activity with a CASPASE-GLO® kit from Promega.
To the mouse serum (500 μL) 100 μL (approximately 100 μCi/3.7 MBq) of radioactive sample was added and the mixture was incubated at 37° C. At each time point, 100 μL of sample was taken and after mixing with 100 μL of acetonitrile was centrifuged at 9,400×g for 5 min. The resulting supernatants were collected, and an aliquot of each supernatant (100 μL) was diluted with 100 μL of water and analyzed via the same HPLC method used for quality control (fitted with a highly sensitive positron detector for radioactivity). The percent ratio of intact compound to the total radioactivity on the HPLC chromatogram was calculated as %=[(peak area for intact compound)/(total peak area)]×100.
Mice were injected subcutaneously on the right shoulder with an estimated 1-2 million HeLa cells. The HeLa cells were allowed to establish a tumor xenograft and to grow to the size of 1 cm in diameter. A subset of the mice was treated with intratumoral injections of 0.2 mg (in 20 μL) doxorubicin. Four days later, the animals were killed, the tumors removed and quickly frozen using dry ice. The following day, tumors were cut into small pieces, weighted and 1 mL/g Riba buffer was added. They were kept on ice for 30 min and then homogenized with a sonicator (Bronson Sonifier 150). The lysed tumor solutions were centrifuged at 11,750×g for 15 min at 4° C. The supernatant was analyzed for caspase-3 activity using the CASPASE-GLO® kit (Promega) and for protein concentration using the standard BSA absorption assay.
One group of animals was scanned at baseline (before treatment) and 4 days post treatment with 0.2 mg doxorubicin injected into the tumor. On the day of scanning, the animals were moved from their housing area to the PET scanner around 1 h prior to the experiment. They were constrained shortly in a tail veiner and injected intravenously, with 440±97 μCi (16±3 MBq) [18F]C-SNAT formulation. They were anesthetized with 2% isoflurane shortly before placement in an R4 microPET scanner (Siemens Medical Solutions, USA). The anesthesia were continued with 2% isoflurane doing 5 min of acquisition. Scans using the control tracer 1-D (173±73 μCi/9±4 Mbq in 200 μL formulation) were carried out in a similar manner using two groups (one baseline and one treated) instead of the same animals at baseline and after treatment. The images were reconstructed using a standard 2D reconstruction without attenuation correction.
The reconstructed images were analyzed by making two volumes of interest (VOI), one on the tumor and one located on the left shoulder corresponding to muscle/bone mixture. The percent of injected dose per gram tissue (% ID/g) was calculated in each VOI and the ratio between tumor and muscle uptake was calculated based on this uptake (uptake in tumor/uptake in muscle region). The effect of treatment was calculated as the difference in uptake of [18F]C-SNAT at baseline and after treatment.
Mice were administered [18F]C-SNAT (100-200 μCi/3.7-7.4 MBq in 100-200 μL of 0.9% saline solution) via tail vein injection and then euthanized by bilateral thoracotomy under anesthesia at 2 h after injection of tracer (n=3). All samples (tumor, heart, whole brain, gallbladder, kidney, liver, lung, muscle, bone, spleen, whole blood) were removed quickly following euthanasia and placed in pre-weighed test tubes. Standard solutions of the tracer were prepared by diluting approximately 100 μCi (3.7 MBq) tracer in 100 mL of water, of which 1 mL of aliquots were used for reference counting.
The test tubes containing tissue samples were weighed and the radioactivity was measured by an automated gamma counter (Cobra Model 5002, Packard, USA) along with the standard solutions. The ratios of the radioactivity in organs to muscle are shown in Table 2.
Comparisons were done using a one-sided unpaired t-test, except for comparing treated to baseline of [18F]C-SNAT where a one-sided paired t-test was used.
An 18F label was introduced to a propargylglycine residue between CHQ and the cysteine residue via the Click reaction. Upon the activation of caspase-3 that cleaves the peptide DEVD, the amino of the cysteine residue is released free, and the reductive intracellular environment reduces the disulfide to generate a free thiol. It has been demonstrated that free cysteine and CHQ can undergo intramolecular cyclization through the condensation reaction with a fast kinetics (half-life at 119.8±10.2s). The cyclized products are more hydrophobic and then self-assemble in situ into nanoparticles with a high density of 18F positron activity, resulting in prolonged retention in apoptotic cells and thus enhanced PET imaging contrast.
The control tracer 1-D was designed to have a similar structure and pharmacokinetics to 1 but not be cleavable by caspase-3 and undergo cyclization and aggregation. Therefore, it contained the same substrate sequence of caspase-3 but made in D-amino acids. In addition, the mercapto group of the cysteine side chain was methylated and it did not have the cyano substitution on its quinoline.
The precursor 3a for synthesizing 1 was prepared according to the scheme shown in
The prosthetic group 10 was obtained in a single step substitution of 9 by 18F in the presence of K222 with a radiochemical yield (RCY) of 37±8% (n=16), as shown in
The Click labeling of 3a by 10 occurred in a mild condition (40-60° C.) with copper ion as the catalyst. When CuSO4 and sodium ascorbate were employed, the RCY in this step was 15±6% (n=6) for 1, and 25±8% (n=4) for 1c. When Cu(CH3)4PF6 and BPDS were applied, the RCY increased to 30±5% (n=4) for 1 with less side products formed, probably due to improved stability of 1 in the absent of sodium ascorbate. The final product was purified on a semi-preparative HPLC and formulated in saline containing less than 10% EtOH. During the HPLC purification of 1-D, because both the precursor 3b and product 1-D had very close retention times (ΔtR<0.1 min), additional [19F]azide 11 was added to consume remaining 3b and afford a product whose retention time was shifted to a much earlier time (ΔtR>10 min), which significantly improved the HPLC purification (
The serum stabilities of 1 and 1-D were tested in human and mouse serum. Both tracers were more than 90% intact in human serum after 2 h incubation at 37° C.; in mouse serum, 1-D displayed higher stability than 1, i.e. 90% of intact 1-D versus 60% of intact 1 was observed after 1 h incubation, probably due to the replacement by the D-amino acids. The intramolecularly cyclized product 2 was also tested and showed greater than 90% integrity in mouse serum after 2 h incubation, as shown in
To evaluate the activatable PET tracer 1 for caspase-3 detection, it was first incubated with recombinant caspase-3 in buffer. Within 1 h, 90% of 1 was shown to cyclize and afford two cyclized isomers based on the Radio-HPLC chromatograph, as shown in
PET tracer 1 was applied to detect caspase-3 in apoptotic cells in vitro. HeLa cells were incubated with doxorubicin (Dox) (2 μM) for 24 h to induce apoptosis. Caspase-3 assays confirmed that the lysates of Dox-treated cells showed 9.5-fold higher caspase-3 activity than that of non-treated cells (
The biodistribution of the activatable PET tracer 1 was performed in nude mice that were euthanized at 120 minutes post injection. Organs were collected, weighed, and analyzed with a gamma counter for radioactivity uptake as shown in Table 1.
Briefly, kidney and bladder showed high levels of absolute uptake, suggesting primary clearance through the renal system. Low tracer uptake in muscle promises minimal background signal in PET imaging. Uptake in the brain tissue was low, suggesting that the anionic 1 could not cross the blood-brain barrier.
Evaluation of activatable PET tracer 1 and control tracer 1-D for PET imaging of caspase-3 activity in vivo was performed in HeLa tumor xenograft-bearing nude mice. Tumors were implanted and grown for a minimum of 10 d before receiving intratumoral injection of 0.2 mg DOX (20 μL). 1 or 1-D (5-15 MBq/135-405 μCi) was injected through the tail vein for PET imaging 4 d post treatment. Static PET scans (5 min) were performed 65, 125 and 182 mins post tracer injection.
Quantification of the PET images with the activatable tracer 1 revealed that the uptake (% ID/g) of the 18F activity in tumors significantly increased after DOX treatment: from 0.81±0.28 (baseline) to 1.17±0.17 (treated) at 65 min, from 0.67±0.24 (baseline) to 1.29±0.07 (treated) at 182 min (
In contrast, the uptake of the control tracer 1-D in both treated and non-treated tumors was much lower than that of 1 (
A mixture of (t-BuO)3DOTA-COOH (0.11 mmol), HBTU (0.12 mmol), and DIPEA (0.21 mmol) in dry DMF (5 ml) was stirred at room temperature for 5 min, to which was added compound 4 (0.1 mmol). The reaction solution was kept stirring at room temperature for another 2 h. After the reaction was completed, the mixture was poured into water (40 ml). The precipitate was collected after centrifugation for 5 min (3000 rpm), which was further dried after lyophilization. MS: calcd. for C95H144N17O22S4 [(M+H)+]: 2003.0; found MALDI-MS: m/z 2002.9.
Compound 13 from last step was deprotected using a solution of TFA/ACN/TIPSH (95/2.5/2.5) at room temperature for 3 h. After the reaction, the solvent was removed under vacuum, and the residue was purified by HPLC to obtain 14 as light yellow powder after lyophilization. 56% yield from 4. 1H NMR (400 MHz, DMSO-d6) δ. MS: calcd. for C71H94N17O22S4 [(M−H)−]: 1664.6; found MALDI-MS: m/z 1664.3.
A solution of 14 in water was carefully added 0.5 M NaHCO3 solution to adjust the pH value to 7, which was following by addition of a solution of GdCl3 (3-5 equivalents) to (8) in water. After stirring at room temperature for 10 min, the pH value of the reaction solution was further adjusted to 7 using 0.5 M NaHCO3 solution. The reaction mixture was bubbled with Ar, and then kept stirring at room temperature overnight. After centrifugation (2500 rpm, 3 min), the supernatant was purified by HPLC to obtain probe 15 as light yellow powder after lyophilization. 75% yield. MALDI-MS: calcd. for C71H93GdN17O22S4 [(M+H)+]: 1821.5; found MALDI-MS: m/z 1821.4. HRMS: calculated for C71H94GdN17O22S4 [(M+2H)2+]: 1822.4883, observed. HR-ESI/MS: [(M+2)/2]+911.2458.
Similar to the synthesis of probe 15, was obtained after chelated of 8 with EuCl3. 79% yield. MALDI-MS: calcd. for C71H91EuN17O22S4 [(M−H)−]: 1814.5; found MALDI-MS: m/z 1814.4
A mixture of (t-BuO)3DOTA-COOH (0.11 mmol), HBTU (0.12 mmol), and DIPEA (0.21 mmol) in dry DMF (5 ml) was stirred at room temperature for 5 min, to which was added compound 8 (0.1 mmol). The reaction solution was kept stirring at room temperature for another 2 h. After the reaction was completed, the mixture was poured into water (40 ml). The precipitate (17) was collected after centrifugation for 5 min (3000 rpm), which was further dried after lyophilization. MS: calcd. For C64H145N16O22S4 [(M+H)+]: 1978.0; found MALDI-MS: m/z 1978.1.
Compound 17 was deprotected using a solution of TFA/DCM/TIPSH (95/2.5/2.5) at room temperature for 3 h. After the reaction, the solvent was removed under vacuum, and the residue was purified by HPLC to obtained 18 after lyophilization. 53% yield from 4.
1H NMR (400 MHz, DMSO-d6) δ 10.36 (s, 1H), 9.01 (d, J=4.1 Hz, 1H), 8.80 (d, J=8.1 Hz, 1H), 8.59 (s, 1H), 8.48 (br, 2H), 8.40 (s, 1H), 8.29 (s, 1H), 8.23 (d, J=7.6 Hz, 2H), 8.11 (d, J=8.7 Hz, 1H), 8.03 (m, 2H), 7.93-7.84 (m, 1H), 7.77-7.59 (m, 4H), 5.31 (t, J=9.0 Hz, 1H), 4.51-4.62 (m, 3H), 4.36-4.49 (br, 2H), 4.19 (s, 2H), 4.09 (s, 2H), 3.91 (s, 2H), 3.78-3.57 (m, 4H), 3.30-3.48 (m, 10H), 3.27 (s, 2H), 2.92-3.24 (m, 12H), 2.81-2.57 (m, 4H), 2.19 (m, 2H), 2.10-1.98 (m, 2H), 1.92 (s, 2H), 1.62-1.85 (m, 5H), 1.32-1.55 (m, 4H), 1.21 (t, J=7.3 Hz, 3H), 0.89-1.11 (m, 4H), 0.66-0.85 (m, 6H). 13C NMR (101 MHz, DMSO-d6) δ 174.79, 172.56, 172.40, 171.90, 171.80, 171.72, 171.56, 171.47, 170.60, 170.36, 170.30, 169.83, 164.92, 159.84, 159.22 (TFA, J=35 Hz), 158.73, 149.31, 144.16, 142.94, 138.75, 136.97, 136.52, 130.75, 126.96, 124.85, 122.84, 120.40, 116.65 (TFA, J=294 Hz), 112.16, 107.70, 79.93, 72.93, 66.88, 58.43, 55.35, 54.62, 54.32, 53.18, 53.14, 52.71, 51.24, 50.48, 50.35, 48.91, 48.54, 36.67, 35.28, 32.30, 31.91, 31.06, 30.74, 29.07, 27.70, 27.52, 23.61, 23.13, 19.84, 19.75, 18.65, 18.47, 17.63, 14.92. MS: calcd. for C70H97N16O22S4 [(M+H)+]: 1641.6; found MALDI-MS: m/z 1641.8.
A solution of 18 in water was carefully added 0.5 M NaHCO3 solution to adjust the pH value to 7, which was following by addition of a solution of GdCl3 (3-5 equivalent) to (18) in water. After stirring at room temperature for 10 min, the pH value of the reaction solution was further adjusted to 7 using 0.5 M NaHCO3 solution. The reaction mixture was bubbled with Ar, and then kept stirring at room temperature overnight. After centrifugation (2500 rpm, 3 min), the supernatant was purified by HPLC to obtain probe 19 as light yellow powder after lyophilization. 82% yield. MALDI-MS: calcd. for C70H94GdN16O22S4 [(M+H)+]: 1796.5; found MALDI-MS: m/z 1796.9. HRMS: calculated for C71H94GdN17O22S4 [(M+2H)2+]: 1822.4883, obsvd. HR-ESI/MS: [(M+2)/2]+911.2458.
Compound 4 was deprotected using a solution of TFA/CH3CN/TIPSH (95/2.5/2.5) at room temperature for 3 h. After the solvent was removed, cold Et2O was added, and the precipitate was dried under vacuum to give compound (5) in 83% yield without further purification.
1H NMR (400 MHz, DMSO-d6) δ 10.37 (s, 1H), 8.59 (d, J=9.7 Hz, 1H), 8.43 (d, J=8.0 Hz, 2H), 8.36-8.13 (m, 4H), 8.12-7.86 (m, 5H), 7.66 (m, 5H), 7.53 (d, J=9.2 Hz, 1H), 7.46 (s, 1H), 5.30 (t, J=9.0 Hz, 1H), 4.66-4.27 (m, 5H), 4.18 (s, br, 2H), 4.13-4.04 (m, 1H), 3.36 (m, 3H), 3.15-3.02 (m, 1H), 2.96 (m, 1H), 2.85-2.64 (m, 5H), 2.56 (m, 2H), 2.44 (m, 1H), 2.16 (m, 2H), 2.09-1.63 (m, 11H), 1.54 (s, br, 2H), 1.37 (m, 2H), 1.21 (t, J=6.9 Hz, 3H), 0.77 (m, 6H); 13C NMR (101 MHz, DMSO) δ 174.81, 172.40, 172.36, 171.82, 171.70, 171.42, 170.31, 169.81, 164.92, 159.87, 159.39, 149.32, 144.30, 138.72, 137.22, 136.99, 131.39, 131.01, 130.58, 125.40, 124.89, 124.81, 120.39, 118.62, 112.18, 106.87, 79.94, 66.76, 58.39, 54.10, 53.19, 52.65, 50.48, 50.29, 39.38, 36.70, 36.64, 36.48, 35.30, 32.28, 31.75, 31.11, 30.73, 29.11, 27.51, 27.30, 23.17, 23.05, 19.76, 18.71, 14.96. MS: calcd. for C55H70N13O15S4 [(M+H)+]: 1280.4; found MALDI-MS: m/z 1280.8.
To a solution of 20 (5 mg) in dry DMF (0.5 ml) was added FITC-NCS (1.2 mg) and DIPEA (5 μl), and the mixture was kept stirring at room temperature for 1 h. After the reaction was completed, the mixture was purified by HPLC to afford 1-FITC (22) in 57% yield. MS: calcd. For C94H110N14O28S7 [M+]: 2106.6; found MALDI-MS: 2106.2.
A series of solutions containing contrast agents with five different concentrations (0.05-0.5 mM) in Caspase buffer (pH 7.4) were treated with or without Casp-3 (50 nM) at 37° C. overnight. The solutions were placed in PCR tubes, bundled together, and MR-imaged at 1T (Bruker Icon, Bruker BioSpin Corp.), 0.5, 1.5 and 3T (Signa HDx, GE Healthcare) at room temperature.
The scanning procedure began with a localizer and then consisted of a series of inversion-prepared fast spin echo scans, identical in all aspects (TR 8000 ms (6000 ms for Bruker Icon), TE minimum, field of view 6 cm, slice thickness 2 mm, matrix 128×128, NEX 1) except for the inversion time (TI) that was varied as: 4000, 2400, 1200, 800, 600, 400, 300, 200, 100, and 50 ms. For quantitative data analysis, the acquired MR images were transferred as DICOM images to an offline workstation, and signal intensities were extracted from each of the 5 samples at each of the 10 TI times by manual region of interest (ROI) placement and voxel averaging within the ROI.
Signal intensity versus TI relationships were fit to the following exponential T1 recovery model by non-linear least squares regression: SI (TI)=S0[1−2*exp(−TI/T1)+exp(−TR/T1)]. Relaxation rates (R1) were determined as 1/T1. Longitudinal relaxivities (r1, units of mM−1s−1) were calculated as the slope of R1 vs [Gd] after the determination of true Gd concentration of each sample by the ICP-MS measurement.
Caspase (human, recombinant from E. coli) assays were performed for caspase-3 (4.9×10−3 U; 7.35×104 mg, Sigma), −7 (18.3 U; 7.35×104 mg, Calbiochem), and −9 (0.3 U; 7.35×104 mg, Calbiochem). All caspase assays were conducted in caspase buffer with 50 mM HEPES, 100 mM NaCl, 1 mM EDTA, 10 mM TCEP, 10% glycerol, and 0.1% CHAPS at pH 7.4.
Cathepsin B (human liver; 0.27 U; 7.35×10−4 mg, Calbiochem) and Legumain (human, recombinant from mouse myeloma cell line; >250 pmol/min/μg; 7.35×104 mg, R&D Systems) were conducted in reaction buffer with 50 mM sodium acetate, 50 mM NaCl, 0.5 mM EDTA and 10 mM TCEP at pH 5.5. The C-SNAF was diluted in the respective enzyme reaction buffer (25 μM, 1 mL) and remained at room temperature for 10 min, to which was added respective enzymes.
HeLa human cervical adenocarcinoma epithelial cells were cultured in Dulbecco's modified eagle medium (GIBCO) supplemented with 10% fetal bovine serum (FBS, GIBCO), 100 U/mL penicillin and 100 μg/mL streptomycin (GIBCO). For epifluorescence microscopy experiments, cells were plated onto #1.5 borosilicate 8-well chambered coverslips and grown to about 70% confluence. For cell uptake and flow cytometry experiments, HeLa cells were plated onto 12-well clear plates and grown to about 70% confluence. For MR imaging of cell pellets experiment, HeLa cells were cultured in a cell culturing dish (75 mm), and grown to about 70% confluence.
About 2×105 HeLa cells in 1 mL DMEM medium were seeded onto 12-well plates. The following day, the medium was replaced with 1 ml of fresh medium, or medium containing probe 15 or Dotarem (200 μM). After 24 h incubation, the medium was removed, and the cells were trypsinized. The cell number was counted using trypan blue assay. The viability of cell with blank medium was set as 100%, and cells incubating with 1 or Dotarem were normalized to that in blank medium.
In Vivo MR Imaging
In vivo MR imaging was performed on an Aspect M2 1T permanent magnet (Aspect Imaging, Shoham, Israel) using a 40 mm Transmit/Receive mouse body coil. During imaging, the animals were anaesthetized with isofluorane and their respiration and body temperature were constantly monitored. Intravenous contrast injection at 0.1 mmol/kg concentration was administered in a 100 μL volume for every imaging session. Multi-slice (312 μm in-plane, 12 slices with 1 mm thickness) T1-weighted spin echo images (TE/TR=8.9/250 ms, matrix 128×128, FOV=40 mm, NEX=6) were acquired, one before contrast injection and then every 4 min up to 4 h after contrast injection. A 1 mM Dotarem reference tube was inserted in the field of view to enable inter-session variability correction during post-processing. Each animal underwent two imaging session; one before DOX treatment (baseline), and one after DOX treatment (treated).
Acquired MR data were transferred as DICOM images to an offline workstation and ImageJ (NIH) was used for post processing and quantitative image analysis. This consisted of manual segmentation of tumor ROI for each slice, slice-wise normalization of mean tumor signal intensity with the 1 mM Dotarem reference standard to account for inter-session variability, followed by combining these normalized, slice-wise values to generate mean volumetric tumor signal intensities (SI) for each time point.
Signal enhancement was calculated at each time point as the difference between the tumor SI at that time point and the tumor SI in the pre-contrast (t=0) dataset.
SE(t)=SI(t)−SI(t=0); for each mouse, for every session
This metric was used to quantify the difference in SE between the baseline (before DOX treatment) session and the treated session for each mouse, as a means to tease out the difference between the two contrast agents, probe 1 and 1-cntl (19) over the time course of the imaging session.
% D(t)=[SE(t,treated)−SE(t,baseline)]/SE(t,baseline); for each mouse.
Mice were implanted with HeLa tumor xenografts subcutaneously on the left shoulder. Once the tumors reached 0.7-0.8 mm in largest diameter, mice were treated with radiation therapy. Radiation therapy was delivered with a single 225 kV beam using the Kimtron IC 225 irradiator (Kimtron Medical, Woodbury, Conn.). The subcutaneous tumors received a dose of 7.6 Gy, which was measured in vivo with thermoluminiscent dosimeters calibrated in the treatment beam. Following treatment, MR imaging was performed exactly as described for the chemotherapy mouse model, except that it occurred 24 h, 48 h, or 72 h post-treatment as shown in
This application claims priority to U.S. Provisional Patent Application Ser. No. 61/869,223 entitled “CASPASE-TRIGGERED NANO-AGGREGATION PROBES AND METHODS OF USE” filed on Aug. 23, 2013, the entirety of which is hereby incorporated by reference.
This invention was made with government support under contracts CA114747 and CA151459 awarded by the National Institutes of Health. The government has certain rights in this invention.
| Number | Date | Country | |
|---|---|---|---|
| 61869223 | Aug 2013 | US |
