The present invention generally relates to determination of disease state from tissue fluorescence and measurement of fasting plasma glucose (FPG), HbA1c, casual glucose, post-challenge glucose measured some time after administration (e.g. 1, 2, 3 hours, etc.) of some amount of exogenous glucose (e.g. 50 gm, 75 gm, 100 gm, etc), fructosamine, 1,5-anhydro-D-glucitol, a 50 gram glucose challenge test, (high sensitivity) C-reactive protein, lipids, lipid fractions, (fasting) insulin, adiponectin, ferritin, apoB, interleukin-1 receptor antagonist, interleukin-6, plasminogen activator inhibitor 1, von Willebrand factor, sex hormone-binding globulin, serum advanced glycation endproducts (AGEs), the receptor for advanced glycation endproducts (RAGE), the soluble form of RAGE (sRAGE) or other biological analytes related to disease state.
Diabetes mellitus is a major health problem in the United States and throughout the world's developed and developing nations. In 2002, the American Diabetes Association (ADA) estimated that 18.2 million Americans—fully 6.4% of the citizenry—were afflicted with some form of diabetes. Of these, 90-95% suffered from type 2 diabetes, and 35%, or about 6 million individuals, were undiagnosed. See ADA Report, Diabetes Care, 2003. The World Health Organization (WHO) estimates that 175 million people worldwide suffer from diabetes; type 2 diabetes also represents 90% of all diagnoses worldwide. Unfortunately, projections indicate that this grim situation will worsen in the next two decades. The WHO forecasts that the total number of diabetics will double before the year 2025. Similarly, the ADA estimates that by 2020, 8.0% of the US population, some 25 million individuals, will have contracted the disease. Assuming rates of detection remain static, this portends that, in less than twenty years, three of every 100 Americans will be ‘silent’ diabetics. It is no surprise that many have characterized the worldwide outbreak of diabetes as epidemic.
Diabetes has a significant impact on individual health and the national economy. U.S. health care costs related to diabetes exceeded $132 billion in 2002. Due to the numerous complications that result from chronic hyperglycemia, these costs were distributed over a wide array of health services. For example, between 5 and 10 percent of all U.S. expenditures in the areas of cardiovascular disease, kidney disease, endocrine and metabolic complications, and ophthalmic disorders were attributable to diabetes. See ADA Report, Diabetes Care, 2003. These economic and health burdens belie the fact that most diabetes-related complications are preventable. The landmark Diabetes Control and Complications Trial (DCCT) established that a strict regimen of glucose monitoring, exercise, proper diet, and insulin therapy significantly reduced the progression of and risk for developing diabetic complications. See DCCT Research Group, N Eng J Med, 1993. Furthermore, the ongoing Diabetes Prevention Program (DPP) has already demonstrated that individuals at risk for diabetes can significantly reduce their chances of contracting the disease by implementing lifestyle changes such a weight loss and increased physical activity. See DPP Research Group, N Eng J Med, 2002. ADA has recommended that health care providers begin screening of individuals with one or more disease risk factors, observing: “If the DPP demonstrates a reduction in the incidence of type 2 diabetes as a result of one or more of the [tested] interventions, then more widespread screening . . . may be justified”. See ADA Position Statement, Diabetes Care, 2003.
The Fasting Plasma Glucose (FPG) test is one of two accepted clinical standards for the diagnosis of or screening for diabetes. See ADA Committee Report, Diabetes Care, 2003. The FPG test is a carbohydrate metabolism test that measures plasma glucose levels after a 12-14 hour fast. Fasting stimulates the release of the hormone glucagon, which in turn raises plasma glucose levels. In non-diabetic individuals, the body will produce and process insulin to counteract the rise in glucose levels. In diabetic individuals, plasma glucose levels remain elevated. The ADA recommends that the FPG test be administered in the morning because afternoon tests tend to produce lower readings. In most healthy individuals, FPG levels will fall between 70 and 100 mg/dl. Medications, exercise, and recent illnesses can impact the results of this test, so an appropriate medical history should be taken before it is performed. FPG levels of 126 mg/dl or higher indicate a need for a subsequent retest. If the same levels are reached during the retest, a diagnosis of diabetes mellitus is typically rendered. Results that measure only slightly above the normal range may require further testing, including the Oral Glucose Tolerance Test (OGTT) or a postprandial plasma glucose test, to confirm a diabetes diagnosis. Other conditions which can cause an elevated result include pancreatitis, Cushing's syndrome, liver or kidney disease, eclampsia, and other acute illnesses such as sepsis or myocardial infarction.
Because it is easier to perform and more convenient for patients, the FPG test is strongly recommended by the ADA and is in more widespread use than the other accepted diagnostic standard, the OGTT. The OGTT is the clinical gold standard for diagnosis of diabetes despite various drawbacks. After presenting in a fasting state, the patient is administered an oral dose of glucose solution (75 to 100 grams of dextrose) which typically causes blood glucose levels to rise in the first hour and return to baseline within three hours as the body produces insulin to normalize glucose levels. Blood glucose levels may be measured four to five times over a 3-hour OGTT administration. On average, levels typically peak at 160-180 mg/dl from 30 minutes to 1 hour after administration of the oral glucose dose, and then return to fasting levels of 140 mg/dl or less within two to three hours. Factors such as age, weight, and race can influence results, as can recent illnesses and certain medications. For example, older individuals will have an upper limit increase of 1 mg/dl in glucose tolerance for every year over age 50. Current ADA guidelines dictate a diagnosis of diabetes if the two-hour post-load blood glucose value is greater than 200 mg/dl on two separate OGTTs administered on different days.
In addition to these diagnostic criteria, the ADA also recognizes two ‘pre-diabetic’ conditions reflecting deviations from euglycemia that, while abnormal, are considered insufficient to merit a diagnosis of diabetes mellitus. An individual is said to have ‘Impaired Fasting Glucose’ (IFG) when a single FPG test falls between 100 and 126 mg/dl. Similarly, when the OGTT yields 2-hour post-load glucose values between 140 and 200 mg/dl, a diagnosis of ‘Impaired Glucose Tolerance’ (IGT) is typically rendered. Both of these conditions are considered risk factors for diabetes, and IFG/IGT were used as entrance criteria in the Diabetes Prevention Program. IFG/IGT are also associated with increased risk of cardiovascular disease.
The need for pre-test fasting, invasive blood draws, and repeat testing on multiple days combine to make the OGTT and FPG tests inconvenient for the patient and expensive to administer. In addition, the diagnostic accuracy of these tests leaves significant room for improvement. See, e.g., M. P. Stern, et al., Ann Intern Med, 2002, and J. S. Yudkin et al., BMJ, 1990. Various attempts have been made in the past to avoid the disadvantages of the FPG and OGTT in diabetes screening. For example, risk assessments based on patient history and paper-and-pencil tests have been attempted, but such techniques have typically resulted in lackluster diagnostic accuracy. In addition, the use of glycated hemoglobin (HbA1c) has been suggested for diabetes screening. However, because HbA1c is an indicator of average glycemia over a period of several weeks, its inherent variability combines with the experimental uncertainty associated with currently-available HbA1c assays to make it a rather poor indicator of diabetes. See ADA Committee Report, Diabetes Care, 2003. HbA1c levels of diabetics can overlap those of nondiabetics, making HbA1c problematic as a screening test. A reliable, convenient, and cost-effective means to screen for diabetes mellitus is needed. Also, a reliable, convenient, and cost-effective means for measuring effects of diabetes could help in treating the disease and avoiding complications from the disease.
U.S. Pat. No. 5,582,168 (Samuels) discloses apparatus and methods for measuring characteristics of biological tissues and similar materials. These apparatus and methods are described with respect to measurements of the human eye. In addition, the correction methodologies described by these inventors involve only measurements of the elastically scattered excitation light. Samuels describes a simple linear correction technique. Samuels does not disclose an algorithm or methods by which tissue disease status may be discriminated via noninvasive measurements.
U.S. Pat. No. 6,505,059 (Kollias) discloses instruments and methods for noninvasive tissue glucose level monitoring. Kollias does not describe any method by which measured fluorescence can be corrected for the effects of tissue absorption and scattering. While Kollias indicates that a tissue reflectance measurement can be made to measure tissue scattering directly, it does not indicate how one would use this information to obtain information regarding the tissue fluorescence spectrum. Furthermore, Kollias does not disclose an algorithm or methods by which tissue disease status may be determined from noninvasive measurements.
U.S. Pat. No. 6,571,118 (Utzinger) discloses methods and apparatus for performing fluorescence and spatially resolved reflectance spectroscopy on a sample. While Utzinger describes a technique in which a combination of fluorescence and reflectance measurements are used to characterize biological tissue, the application does not relate to spectroscopy of the skin. Furthermore, the reflectance measurements described in Utzinger are spatially-resolved in nature, that is, the reflectance spectroscopy is to be conducted at one or more specific source-receiver separations. Finally, no algorithm or process is described by which the measured fluorescence may be corrected using the tissue reflectance measurements to obtain or approximate the intrinsic fluorescence spectrum of the tissue in question.
US Patent application 20030013973 (Georgakoudi) discloses a system and methods of fluorescence, reflectance and light scattering spectroscopy for measuring tissue characteristics. Georgakoudi discusses estimation of intrinsic fluorescence using reflectance properties as applied to detection of esophageal cancer and Barrett's esophagus. Georgakoudi does not describe any specific techniques for such estimation.
U.S. Pat. No. 6,088,606 (Ignotz) discloses a system and method for determining the duration of a medical condition. Ignotz mentions fluorescence, but does not use a reflectance spectrum to obtain or estimate an intrinsic fluorescence spectrum. In addition, Ignotz described methods relating to determining the duration of a disease, not for diagnosing or screening for the presence of disease or for quantifying the concentration of specified chemical analytes. Finally, Ignotz does not address skin as a useful measurement site.
U.S. Pat. No. 5,601,079 (Wong) describes an apparatus for the non-invasive quantification of glucose control, aging, and advanced Maillard products by stimulated fluorescence. Wong specifically quantifies Advanced Glycation Endproducts in the blood, not in the skin and/or its structural proteins. In addition, the fluorescence correction methodology involves only measurements of the elastically scattered excitation light. Wong describes only a simple linear correction technique. Finally, Wong does not disclose an algorithm or methods by which tissue disease status may be discriminated via noninvasive measurements.
International patent publication WO 01/22869 (Smits) describes an apparatus for non-invasive determination of skin autofluorescence. The apparatus consists of a broadband uv source (blacklight) that illuminates skin through interchangeable optical bandpass filters. Resulting skin fluorescence is fiber-optically coupled to a compact spectrophotometer. The application proffers AGE concentration in the skin can be inferred from qualitative assessment of skin autofluorescence but it does not describe any means by which the AGE content can be quantified using the device and measurement techniques. The apparatus is intended to assess skin fluorescence in healthy individuals and does not address the utility of the device for disease determination. The application notes that individual skin coloring and substructure can be a measurement interferent but it is silent on techniques or methods to compensate for these variable characteristics.
HbA1c is a test that measures the amount of glycated hemoglobin in blood, and is used in the monitoring of control of blood sugar over several months, often used in patients with diabetes. It has been used as a test for diabetes, as well. Because red blood cells have a 120 day lifespan, HbA1c can only assess blood sugar levels over the previous 120 day period. Some researchers assert that the HbA1c test is actually only valuable for assessing blood sugar levels over the previous few weeks.
The casual plasma glucose test is another method of diagnosing diabetes. During the test, blood sugar is tested without regard to the time since the person's last meal. The patient is not required to abstain from eating prior to the test. A glucose level greater than 200 mg/dL and symptoms may indicate diabetes, especially if the test is repeated at a later time and shows similar results.
Post-challenge glucose is measured some amount of time after administration of a glucose load to the subject and is an indication of glucose absorption by the gut, insulin resistance and insulin secretion. The glucose load can be administered intravenously or by oral ingestion. Typical glucose loads are 50, 75 or 100 grams and the post-challenge measurement is typically done an hour, two hours or three hours after administration of the glucose. The glucose load can be done after an overnight fast or in a non-fasting state.
Fructosamine (glycated albumin) measures short term control of blood sugar for the past 1-3 weeks. Each 75 μmol change equals a change of approximately 60 mg/dl blood sugar or 2% HbA1c.
Plasma 1,5-anhydro-D-glucitol (AG) is a marker of the diabetic state and also reflects the glycosuria induced by hyperglycemia but not by renal pathology. The test specifically targets glycemic response above the renal threshold over one to two weeks to provide a measure of after-meal glucose peaks.
The glucose challenge test measures the body's response to glucose without requiring an initial fast by the patient. The glucose challenge test is done in two steps. First the patient drinks a 50 gram oral glucose solution. One hour later, the patient's blood sugar level is measured. The results of the glucose challenge test indicate whether the patient might have pre-diabetes or diabetes.
C-reactive protein and its high sensitivity variant are markers of inflammation in the blood and have been found to be elevated in people with metabolic syndrome, cardiovascular disease, pre-diabetes and diabetes.
Lipids are traditionally measured to assess cardiovascular risk and are also risk factors for metabolic syndrome, pre-diabetes and diabetes. A typical lipid panel taken from a fasting blood sample will consist of total cholesterol, low-density lipoprotein (LDL), high-density lipoprotein (HDL) and triglycerides.
Lipid fractions are also measured in the blood and provide more specificity for cardiovascular risk and diabetes. Examples of lipid fractions are low density lipoprotein-cholesterol (LDL-C), high density lipoprotein-cholesterol (HDL-C), very low density lipoproteins (vLDL) and ultra low density lipoproteins (uLDL).
Insulin is utilized by the body to metabolize glucose and can be measured in the blood in either fasting or non-fasting states. Insulin resistance, over production of insulin and insulin insufficiency are all markers of metabolic syndrome, pre-diabetes and diabetes.
Adiponectin is a protein hormone that modulates a number of metabolic processes, including glucose regulation and fatty acid catabolism. Adiponectin is exclusively secreted from adipose tissue into the bloodstream and is very abundant in plasma relative to many hormones. Levels of the hormone are inversely correlated with body fat percentage in adults. The hormone plays a role in the suppression of the metabolic derangements that may result in type 2 diabetes, obesity, cardivascular disease, non-alcoholic fatty liver disease (NAFLD) and is an independent risk factor for metabolic syndrome.
Ferritin is an intracellular protein that acts as a marker of iron sufficiency and inflammation. Clinical studies have shown ferritin to be independently associated with diabetes.
Apolipoprotein B (apoB) is the primary apolipoprotein of low-density lipoproteins (LDL or “bad cholesterol”), which is responsible for carrying cholesterol to tissues. High levels of apoB can lead to plaques that cause cardiovascular disease. apoB is also associated with diabetes.
Interleukin-1 receptor antagonist (IL-1ra) is a cytokine whose only known action is competitive inhibition of the binding of interleukin 1 (IL-1) to its receptor and it is a marker of inflammation. IL-1ra has been associated with cardiovascular disease and diabetes.
Interleukin-6 acts as both a pro-inflammatory and anti-inflammatory cytokine. It is associated with cardiovascular disease, metabolic syndrome, pre-diabetes and diabetes.
Plasminogen activator inhibitor 1 is a serine protease inhibitor that functions as the principal inhibitor of tissue plasminogen activator and urokinase. Plasminogen activator inhibitor 1 is mainly produced by the endothelium (cells lining blood vessels), but is also secreted by other tissue types, such as adipose tissue. It is present in increased levels in various disease states such as obesity, cardiovascular disease, metabolic syndrome, pre-diabetes and diabetes.
Von Willebrand factor is a blood glycoprotein involved in hemostasis and has been associated with diabetes.
Sex hormone-binding globulin is a glycoprotein that binds to sex hormones and has been associated with diabetes.
Serum advanced glycation endproducts (AGEs) such as carboxymethyl lysine, carboxyethyl lysine and pentosidine are elevated in persons with diabetes, cardiovascular disease and renal disease.
The receptor for advanced glycation endproducts (RAGE) is a member of the immunoglobulin super family that binds AGEs in the blood and is an indicator of inflammation. Due to an enhanced level of RAGE ligands in diabetes or other chronic disorders, this receptor is hypothesized to have a causative effect in a range of inflammatory diseases such as diabetic complications, Alzheimer's disease and even some tumors.
Soluble form of RAGE (sRAGE) corresponds to the extracellular domain of RAGE lacking cytosolic and transmembrane domains. sRAGE levels have been found to be decreased in chronic inflammatory diseases including cardiovascular disease, diabetes, renal failure and the aging process.
The present invention provides a method of determining disease state in an individual. A portion of the tissue of the individual is illuminated with excitation light, then light emitted by the tissue due to fluorescence of a chemical in the tissue responsive to the excitation light is detected. The FPG, HbA1c, casual glucose, fructosamine, 1,5-anhydro-D-glucitol, a 50 gram glucose challenge test, (high sensitivity) C-reactive protein, lipids, lipid fractions, (fasting) insulin, adiponectin, ferritin, apoB, interleukin-1 receptor antagonist, interleukin-6, plasminogen activator inhibitor 1, von Willebrand factor, sex hormone-binding globulin, serum advanced glycation endproducts (AGEs), the receptor for advanced glycation endproducts (RAGE), the soluble form of RAGE (sRAGE) and/or other biological analyte measurement of the individual (or other secondary indication of disease state) can also be determined. A model combining the tissue fluorescence with the FPG, HbA1c, casual glucose, fructosamine, 1,5-anhydro-D-glucitol, a 50 gram glucose challenge test, (high sensitivity) C-reactive protein, lipids, lipid fractions, (fasting) insulin, adiponectin, ferritin, apoB, interleukin-1 receptor antagonist, interleukin-6, plasminogen activator inhibitor 1, von Willebrand factor, sex hormone-binding globulin, serum advanced glycation endproducts (AGEs), the receptor for advanced glycation endproducts (RAGE), the soluble form of RAGE (sRAGE) and/or other biological analytes can be used to determine the disease state of the individual. In other embodiments, a model based solely on the tissue fluorescence to determine the disease state of the individual may be combined, a posteriori, with the FPG, HbA1c, casual glucose, fructosamine, 1,5-anhydro-D-glucitol, 50 gram glucose challenge test, (high sensitivity) C-reactive protein, lipids, lipid fractions, (fasting) insulin, adiponectin, ferritin, apoB, interleukin-1 receptor antagonist, interleukin-6, plasminogen activator inhibitor 1, von Willebrand factor, sex hormone-binding globulin, serum advanced glycation endproducts (AGEs), the receptor for advanced glycation endproducts (RAGE), the soluble form of RAGE (sRAGE) and/or other biological analytes results to determine a more accurate measure of the disease state of the individual. In still other embodiments, the tissue fluorescence can be used as an initial screen, and the combination with FPG, HbA1c, casual glucose, fructosamine, 1,5-anhydro-D-glucitol, 50 gram glucose challenge test, (high sensitivity) C-reactive protein, lipids, lipid fractions, (fasting) insulin, adiponectin, ferritin, apoB, interleukin-1 receptor antagonist, interleukin-6, plasminogen activator inhibitor 1, von Willebrand factor, sex hormone-binding globulin, serum advanced glycation endproducts (AGEs), the receptor for advanced glycation endproducts (RAGE), the soluble form of RAGE (sRAGE) and/or other biological analytes only made for those individuals who the fluorescence screen indicates an increased likelihood of disease.
A tissue fluorescence measurement can comprise single wavelength excitation light, scanning of excitation light (illuminating the tissue at a plurality of wavelengths), detection at a single wavelength, scanning of detection wavelengths (detecting emitted light at a plurality of wavelengths), and combinations thereof. The tissue fluorescence measurement also can comprise correction techniques that reduce determination errors due to detection of light other than that from fluorescence of a chemical in the tissue. For example, the reflectance of the tissue can lead to errors if appropriate correction is not employed. The tissue fluorescence measurement can also comprise a variety of models relating fluorescence to disease state, including a variety of methods for generating such models. Other biologic information can be used in combination with the fluorescence properties to aid in the determination of tissue state, for example age of the individual, height of the individual, weight of the individual, body mass index (BMI), history of disease in the individual's family, ethnicity, skin melanin content, or a combination thereof. Raman or near-infrared spectroscopic examination can also be used to supply additional information, for example like that discussed in U.S. patent application Ser. No. 10/116,272, entitled “Apparatus And Method For Spectroscopic Analysis Of Tissue To Detect Diabetes In An Individual,” filed Apr. 4, 2002. The invention also comprises apparatuses suitable for carrying out the method, including appropriate light sources, tissue sampling devices, detectors, and models (for example, implemented on computers) used to relate detected fluorescence and disease state.
As used herein, “determining a disease state” includes determining the presence or likelihood of diabetes; the degree of progression of diabetes; a change in the presence, likelihood, or progression of diabetes; a probability of having, not having, developing, or not developing diabetes; the presence, absence, progression, or likelihood of complications from diabetes. “Diabetes” includes a number of blood glucose regulation conditions, including Type I, Type II, and gestational diabetes, other types of diabetes as recognized by the American Diabetes Association (See ADA Committee Report, Diabetes Care, 2003), hyperglycemia, impaired fasting glucose, impaired glucose tolerance, and pre-diabetes. “Tissue reflectance characteristic” includes any reflectance property of tissue that is useful in correction of detected light, including as examples the tissue reflectance at the fluorescence excitation wavelength, the tissue reflectance at the fluorescence emission wavelength, and the tissue reflectance at other wavelengths found useful for estimating the tissue's intrinsic fluorescence spectrum. A “measure of chemical change due to glycemic control” means any change in the chemical characteristics of tissue that is due to glycemic control, examples including concentration, measurements of the presence, concentration, or change in concentration of glycation end-products in tissue; measurements of the rate or change in the rate of the accumulation of such end-products; measurements of tissue membrane thickness or the change, rate of change, or direction of change of such thickness; tissue properties such as tensile strength, strain, or compressibility, or the change, rate of change, or direction of change of such property. A “measure of glycation end-product” means any measure of the presence, time, extent, or state of tissue associated with hyperglycemia, including, as examples, measurements of the presence, concentration, or change in concentration of glycation end-products in tissue; measurements of the rate or change in the rate of the accumulation of such end-products; measurements of the presence, intensity, or change in intensity of fluorescence at wavelengths known to be associated with tissue glycation end-products; and measurements of the rate or change in the rate of the accumulation of such fluorescence. When light is described as having a “single wavelength”, it is understood that the light can actually comprise light at a plurality of wavelengths, but that a significant portion of the energy in the light is transmitted at a single wavelength or at a range of wavelengths near a single wavelength.
The drawings, which are not necessarily to scale, depict illustrative embodiments and are not intended to limit the scope of the invention.
Exposure of proteins to glucose generally leads to nonenzymatic glycation and glycoxidation, a process known as the Maillard reaction. The stable endproducts of the Maillard reaction are collectively denoted Advanced Glycation Endproducts (AGEs). In the absence of significant clearance, these AGEs accumulate at rates proportional to the average level of glycemia. The Maillard reaction can be viewed as an aging process that occurs routinely in health and at an accelerated rate in diabetics due to the presence of chronic hyperglycemia. In skin, collagen is the most abundant protein and readily undergoes glycation. Skin collagen AGEs commonly take the form of fluorescent crosslinks and adducts; pentosidine (a crosslink) and carboxymethyl-lysine (CML, an adduct) are two well-studied examples of skin-collagen AGEs. Other examples of AGEs include fluorolink, pyrraline, crosslines, N . . . -(2-carboxyethyl)lysine (CEL) glyoxal-lysine dimer (GOLD), methylglyoxal-lysine dimer (MOLD), 3DG-ARG imidazolone, vesperlysines A, B, C, and threosidine. One common measure of aggregate AGE production and concomitant collagen cross-linking is the level of collagen-linked fluorescence (CLF). CLF is typically measured in vitro by monitoring fluorescence emission of chemically isolated collagen in the 400-500 nm region after excitation at or near 370 nm. See Monnier, NEJM, 1986.
The relatively long half-life (t1/2≅15 yr) of skin collagen and the fluorescent properties of many of its associated AGEs make these species potential indicators of cumulative tissue glycemia. CLF intensity and levels of specific skin AGEs are correlated with the presence and severity of end-organ diabetes complications such as joint stiffness, retinopathy, nephropathy, and arterial stiffness. See Buckingham, Diabetes Care, 1984; Buckingham J Clin Invest, 1990; Monnier, NEJM 1986; Monnier, J Clin Invest 1986; Sell, Diabetes, 1992. In the largest such study to date, the DCCT Skin Collagen Ancillary Study Group evaluated a number of skin collagen variables from punch biopsies that were donated by a large fraction of the study's participants. These researchers found that skin AGEs were significantly correlated with the presence and clinical grade of diabetic neuropathy, nephropathy, and retinopathy. See Monnier et al., Diabetes, 1999.
The present invention can provide an improved determination of the diabetic state of a subject using one or more noninvasive fluorescence measurements combined with a measurement such as FPG or HbA1c. Tissue fluorescence measurements suitable for use with the present invention are first described, followed by a description of how such tissue fluorescence measurements can be combined with measurements such as HbA1c or FPG to provide performance better than either test alone.
Tissue Fluorescence Measurements.
The invention can illuminate a portion of the tissue of the individual (e.g., a portion of the skin) with excitation light and detect fluorescent light emitted by the tissue. The fluorescence measurements can include at least one set of excitation and emission wavelengths corresponding to the CLF window described above. The characteristics of the fluorescent light convey information about the disease state of the tissue under interrogation. The invention can apply additional processing algorithms to the measured fluorescence before imposing a simple numerical threshold or a more detailed mathematical model to relate the optical information to disease state. In other embodiments, the output of the thresholding process or mathematical model can be a quantitative measure of diabetes-induced chemical change in the tissue of the individual being measured rendered without regard to the individual's diabetic status. In additional embodiments, the invention can utilize a quantitative measure of diabetes-induced chemical changes in order to further infer or classify the diabetic status of the individual undergoing measurement.
Determining a Fluorescence Property of Tissue
Tissue fluorescence is initiated when tissue is illuminated by light that promotes electrons in various molecular species to excited energy levels. Some of the excited molecules decay radiatively, emitting light as the electrons return to a lower energy state. The remitted fluorescence is always of a longer wavelength (lower photon energy) than that of the excitation. The absorption and fluorescence spectra of biomolecules are typically broad and overlapping. Most tissues will absorb a wide range of wavelengths. For a given excitation wavelength, the remitted fluorescence spectrum is often correspondingly broad. Several factors impact the useful range of excitation and emission wavelengths. The fluorescing species (e.g. pentosidine) typically absorb most strongly in the UVA (315-400 nm) and remit in the UVA through short wavelength visible range (340-500 nm). The long wavelength limit of the excitation and emission range is usually imposed by the electronic structure of the fluorescing components. Optical safety considerations can limit the shortest practical excitation wavelengths to the UVA or longer wavelengths. The threshold limit values for optical exposure decrease dramatically for wavelengths below 315 nm. Consequently, safe exposure times for wavelengths in the UVB (280-315 nm) can be too brief for effective spectral data acquisition.
Only gross biochemical and morphological tissue information can be obtained if the spectral selectivity of either the excitation or emission sections of a fluorimeter is relatively coarse. A more useful approach is to consider the emission at a particular wavelength (or narrow range of wavelengths) in response to excitation by light having a single or narrow range of wavelengths—an excitation/emission pair. In practice, the fluorescence signal at a particular wavelength pair can be monitored, or signals corresponding to a collection of excitation/emission pairs can be acquired. Emission spectra (or emission scans) are created when the source wavelength is fixed and fluorescence signal is acquired over a range of emission wavelengths. Similarly, excitation spectra are acquired by fixing the wavelength of emitted fluorescence that is detected while the source wavelength is varied. An excitation-emission map can be used to represent the fluorescence signal as a topographic surface covering a range of excitation and emission wavelengths. Emission and excitation spectra correspond to orthogonal sections of such a map. The points falling on the diagonal of an excitation-emission map, that is, where the excitation and emission wavelengths are equal, indicate the intensity of elastically scattered photons that are reflected by the tissue back to the detection system. These ‘reflectance’ measurements can be obtained by synchronous scanning of both the excitation and emission monochromators in a fluorimeter or by a separate dedicated apparatus. Both fluorescence and reflectance measurements can be used to ascertain the true or ‘intrinsic’ fluorescence properties of an optically turbid medium such a biological tissue.
When excitation light is launched into the tissue, it is subject to scattering and absorption processes that vary with the optical properties of the site under interrogation, the excitation wavelength, and the optical probe geometry. Emitted fluorescent light is also subject to wavelength- and location-dependent absorption and scattering as it propagates through the tissue prior to emergence and collection. Often, the tissue property of interest is its ‘intrinsic’ fluorescence, defined as the fluorescence emitted by a specimen that is homogeneous, nonscattering, and optically dilute. In order to accurately characterize the intrinsic fluorescence spectrum of the tissue of interest, the spectra-altering effects of scattering and absorption that are impressed upon the excitation and emitted light can be removed. Variations due to subject-to-subject and site-to-site differences can overwhelm the subtle spectral variations indicative of tissue status. Spectral correction based upon the tissue optics of each subject (at the same site as the fluorescence measurement, or at a different site having a predictable relationship to the site) can reveal the intrinsic fluorescence spectra of the molecules of interest. This intrinsic correction mitigates the variations across and within subjects, unmasking the spectral features relating to presence and state of disease.
The data described in this example were collected with a SkinSkan fluorimeter (marketed by Jobin-Yvon, Edison, N.J., USA). The excitation and emission sides of the SkinSkan system have dual scanning ⅛-m grating monochromators, accomplishing a ˜5 nm system bandpass. Excitation light is provided by a 100 W Xe-arc lamp and is f/number matched to a bifurcated fiber probe containing 31 source and 31 detection fibers. The fibers have 200-micron core diameters and are randomly arranged in a 6-mm diameter circular bundle within a ferrule, the distal end of which serves as the skin interface. The output ends of the detection fibers are stacked into an input ferrule, and the fibers' width forms the entrance slit to the first input monochromator. Optical detection is accomplished with a photomultiplier, the gain of which can be controlled via software. Whenever noninvasive spectroscopy was performed, background measurements of a uniformly reflecting material (2% Spectralon, LabSphere, North Sutton, N.H., USA) were also obtained to facilitate removal of the instrument lineshape. In addition, the SkinSkan system provides a silicon photodetector that independently monitors the excitation lamp, allowing for correction for lamp intensity fluctuations. Thus, ‘measured’ skin fluorescence values, Fmeas, are reported as:
where λx is the excitation wavelength, λm is the emission wavelength, Ftiss is the ‘raw’ fluorescence at the detector, IDC is the PMT dark current, L is the excitation lamp intensity, t denotes time, back refers to the Spectralon background, and Rback is the reflectance of the Spectralon background. Similarly, measured skin reflectance values, Rmeas are reported as:
where Rtiss is the ‘raw’ tissue reflectance signal at the detector. When the SkinSkan system is used for both fluorescence and reflectance measurements, it is required that a different PMT bias voltage be used for each measurement modality in order to avoid detector saturation.
Typical measured fluorescence spectra of skin are shown in the left panels of
The optimum values for n and k are dependent on the arrangement of source and detector fibers, and can be determined empirically. Intrinsic fluorescence spectra obtained from the spectra of
The values of n and k used in the intrinsic corrections illustrated in
S
insert i,j(λ,n,k)=abs[Fcorr
An aggregate measure of insertion variation is then the variance of Sinsert:
v
insert(λ,n,k)=var(Sinsert(λ,n,k)). Eq 5
A variety of other procedures can accomplish intrinsic fluorescence correction. For example, a number of methods have been described by which the measured fluorescence can be corrected using knowledge of the measured reflectance, tissue optical properties, and probe-dependent parameters. See, e.g., Gardner et al., Appl Opt, 1996, Zhang et al., Opt Lett, 2000; Muller et al., Appl Opt, 2001. In addition, intrinsic fluorescence corrections can be made using a procedure in which the correction parameters for a given fluorescence probe are created by measuring one or more tissue phantoms for which the fluorescence, absorption, and scattering properties have been well-characterized. This procedure can also be accomplished via Monte-Carlo or other computer simulation of the optical probe's response to media with known optical properties. Any of these processes can be used to correct for the effects of tissue optical properties in noninvasive skin fluorescence measurements. A multi-channel optical probe as described here can enable the measurement of optical properties of the tissue. The optical properties can be determined by solving analytic expressions given multi-channel fluorescence and/or reflectance measurements. Alternatively, optical properties can be estimated from the spectroscopic measurements by comparison with look-up tables relating measured values to predetermined optical property values. Such look-up tables can be generated from numerical models that simulate multi-channel intensity measurements over a range of simulated optical properties. Look-up tables can also be constructed from experimental measurements of tissue-like phantoms spanning a range of optical properties. The measured or estimated optical properties can then be applied to correct for the spectral distortion they induce on incident and fluorescent light. Correction can be accomplished by comparison to a probe calibration tables that can be derived either numerically or experimentally. Inversion algorithms of fluorescence spectroscopy can also be applied to extract the intrinsic dermal fluorescence once measured or estimated optical properties of the tissue have been determined. Alternative methods for multi-channel optical correction of tissue fluorescence include soft-model techniques such as described above (Eq 3). A multi-channel measurement can be used to mitigate the impact of epidermal pigmentation and superficial blood content. For example, by taking the ratio of the reflectance measurement at adjacent channels (Eq 6), the filtering effects of the epidermis are essentially removed, yielding a ratio of transfer functions of the two channels and thus the tissue layers that they interrogate.
R
1
=I
0exp(−μa,epi·2tepi)T1(μa,derm,μs,derm),
R
2
=I
0exp(−μa,epi·2tepi)T2(μa,derm,μs,derm),
R
norm
=R
1
/R
2
=T
1
/T
2, Eq 6
Applying techniques per Equation 6, to the respective channels' fluorescence signals yields a fluorescence transfer function that can provide useful fluorescence information with the masking effects of the epidermis and upper dermis largely eliminated. Spectroscopic data from individual channels can be fused and/or combined to provide multivariate techniques additional spectral information that may yield more accurate and/or robust quantification and classification models.
While the examples described here generally concern steady-state fluorescence measurements without regard to polarization, it is possible to apply these methods to other fluorescence measurement modalities. For example, frequency-domain fluorescence spectroscopy, in which the excitation light is amplitude-modulated at RF frequencies and the phase and modulation of the emission light are monitored, can be suitable. Another suitable approach involves time-resolved techniques, in which a short burst of excitation light is applied to the tissue, after which the time-evolution of the resulting fluorescence emission is sampled. Both frequency-domain and time-resolved measurements add the capability to monitor, for example, fluorescence lifetime, a parameter that can provide additional discrimination power. In addition, using polarized excitation light and polarization-sensitive detection, it is possible to measure the fluorescence anisotropy, defined by r=(I∥−I⊥)/(I∥+2I⊥), where I∥ and I⊥ are the fluorescence intensities with polarization parallel and perpendicular to that of a linearly polarized excitation beam. Fluorescence anisotropy measurements can separate signals from fluorophores with overlapping spectra but different rotational correlation times or molecular orientations. In addition, any of these techniques can be used in conjunction with an imaging methodology such as microscopy or macroscopic scanning of the excitation beam in order to acquire information about the spatial distribution of fluorophores. Any of the above-mentioned methods can be used in conjunction with a measurement technique that allows depth discrimination, such as a confocal detection system or optical coherence tomography, to add information concerning the distribution of fluorophores with respect to depth beneath the tissue surface.
Determining a Model Relating Fluorescence Properties to Disease State or Chemical Changes
The relationship between tissue fluorescence properties at one or more wavelengths and diabetes disease state is typically not apparent upon visual inspection of the spectral data. Because this is the case, it is usually necessary that a multivariate mathematical relationship, or ‘model’, be constructed to classify tissue disease states or to quantify chemical changes using intrinsic fluorescence spectra. The construction of such a model generally occurs in two phases: (i) collection of ‘calibration’ or ‘training’ data, and (ii) establishing a mathematical relationship between the training data and the disease states or reference concentrations represented in the training data.
During the collection of training data, it can be desirable to collect fluorescence data from many individuals, representing all disease states or reference values one wishes to characterize with the model to be constructed. For example, if one wishes to construct a model that separates diabetics from nondiabetics, it can be desirable to collect representative spectra from a wide variety of both types of individuals. It can be important to collect these data in a manner that minimizes the correlation between disease state and other parameters that can result in fluorescence variation. For example, the natural formation of collagen AGEs in health results in a correlation between skin AGE content and chronological age. It can be important, therefore, to obtain spectra from diabetics and nondiabetics spanning the ages for which the classification model is desired to be applicable. Alternatively, if one wished to construct a model that quantified the level of a specific skin collagen AGE, it can be advisable to collect spectroscopic data spanning a wide range of AGE reference values each day rather than to measure all individuals having the smallest AGE concentrations early in the study and all individuals with larger AGE concentrations later in the study. In the latter case, a spurious correlation arises between AGE concentration and time, and if there are instrumental trends over the course of the study, the resulting model might be calibrated to instrument state rather than analyte concentration.
As the training data are collected, additional reference information can be collected in order to later construct an appropriate classification model. For example, if the classification model is to predict diabetic state, the diabetes status of some or all of the individuals represented in the training set can be collected and associated with the corresponding spectroscopic training data. Alternatively, the classification model can predict the level of a certain chemical species in the skin, such as glycated collagen, glycated elastin, a specific AGE such as pentosidine or CML, or other proteins modified by the hyperglycemic conditions associated with diabetes mellitus. In these cases, skin biopsy specimens can be collected from individuals during the collection of training data. In addition, if other ancillary information, such as age, body mass index, blood pressure, HbA1c, etc. is to be used in generating later disease state assessments, this information can be collected for some or all spectra in the training set.
After the training data are collected, a multivariate model can be constructed to relate the disease states associated with the training data to the corresponding spectroscopic information. The exact model can be chosen based upon the ultimate goal of the training phase. There are at least two types of multivariate models that one might construct. In the first, the goal of the training process is to create a model that correctly classifies the disease state of the measured tissue. In this case, the output of the model is an assignment to one or more discrete classes or groups. These classes or groups might represent different grades or manifestations of a particular disease. They might also represent various degrees of risk for contracting a particular disease or other subgroups of the population that are pertinent to the disease state in question. For the second model type, the goal is to provide a quantitative estimate of some diabetes-induced chemical change in the system. The output of this model is continuously variable across the relevant range of variation and is not necessarily indicative of disease status.
Classification of Tissue Disease Status
The model-building steps typically followed when the end goal is to use the model to assess tissue disease state are depicted diagrammatically in
where
A technique for separating the data into the various classes can be selected. A variety of algorithms can be suitable, and the optimum algorithm can be selected according to the structure of the training data. In Linear Discriminant Analysis (LDA), a single linear function that best separates the multidimensional spectroscopic data into the reference classes observed in the training period is constructed. In Quadratic Discriminants Analysis, a quadratic discriminant function is constructed.
A number of suitable classification algorithms exist. For example, k-nearest neighbors, logistic regression, hierarchical clustering algorithms such as Classification and Regression Trees (CART), and machine learning techniques such as neural networks, can all be appropriate and useful techniques. A detailed discussion of such techniques is available in Huberty, Applied Discriminant Anaylsis, Wiley & Sons, 1994 and Duda, Hart, and Stork, Pattern Classification, Wiley & Sons, 2001.
Quantitation of Diabetes-Induced Chemical Modifications
When the end goal is to quantify the concentration of an analyte or a class of analytes that are embedded in the tissue, a different approach can be taken in the model-building process. In this case, a set of (typically continuous) reference values for the analyte(s) in question can be obtained for some or all spectra in the training set. For example, in the event that the model is to quantify the level of pentosidine in skin collagen, the reference concentrations associated with each spectrum in the training set can come from pentosidine assays conducted on skin punch biopsy specimens obtained during calibration. In the event that the biopsy process is too invasive for the study participants, some surrogate for AGE-related chemical changes can also be used. For example, under the assumption that FPG values increase as the degree of diabetes progression increases, a reasonable compromise can collect FPG data as a surrogate for skin AGE concentration. HbA1c and OGTT information can be used similarly.
Calibration models used to predict quantitative values associated with a test set can be constructed by forming a mathematical relation between reference values and associated spectral data. A variety of algorithms are suitable. For example, in Principal Components Regression (PCR) the calibration data are first decomposed into a set of orthogonal scores and loadings, and then the reference values are regressed onto the scores of the first N PCA factors. Another suitable method is Partial Least-Squares (PLS) regression, in which a set of factors are constructed so that the squared covariance between the reference values and the scores on each successive PLS loading vector is maximized. These procedures and others have been summarized by Martens and Naes in Multivariate Calibration, Wiley & Sons (1989).
Quantitative calibration models are certainly not limited to the regression techniques described here. Those skilled in the art will recognize that a variety of other approaches is available, including other regression techniques, neural networks, and other nonlinear techniques.
Determining Disease State or Chemical Changes From a Fluorescence Property
After model construction, fluorescence measurements can be made on new specimens having an unknown disease state or diabetes-related chemical change. The method by which the disease state or chemical properties of the new specimen are determined can be dependent of the type of model constructed in the training phase.
Classification of Tissue Disease Status
As mentioned above, a variety of models is available for discrimination of various diabetic states from measured fluorescence properties. For example, when the method of Quadratic Discriminants Analysis is used, the new fluorescence spectrum is projected onto the factors created with the training data during construction of the classification model, creating a new vector of scores, xi, for the test spectrum. The means
D
i,j=(xi−
The posterior probability that test sample i is a member of class j, p(iεj), can be calculated using Equation 8. As with all probabilities, this number ranges between 0 and 1; probabilities close to 1 indicate that an observation lies close to the diabetic class, and probabilities close to 0 indicate that an observation lies close to the non-diabetic class. The probability that sample i is a member of class j is given by
where πij are the prior probabilities that test sample i is a member of class j based on other knowledge (risk factors, etc.). The prior probabilities are parameters that can be tuned in the prediction phase depending, in part, on the diagnostic application of the classification algorithm.
A threshold can be applied that assigns the new fluorescence measurement to a particular tissue disease state. For example, it might be determined that all fluorescence measurements yielding a posterior probability of diabetes greater than 0.75 will be assigned to the diabetic class. Like the prior probabilities, the exact threshold applied in validation can depend on a variety of factors, including the application, disease prevalence, and socioeconomic ramifications of positive and negative test results.
Quantitation of Diabetes-Induced Chemical Modifications
The output of a quantitative calibration model can be a regression vector that converts the corrected fluorescence spectrum into a quantitative analyte prediction via an inner product:
â=F
corr
·b, Eq 9
where â is the analyte prediction and b is the regression vector.
The method for generating a quantitative output can vary with the model constructed in the training phase. Final analyte quantitation with, for example, a neural network proceeds by a different process but yields a similar output.
After the construction of either type (i.e., a quantitative model for chemical change or a classification model for tissue disease state) of multivariate model, the accuracy of the model can be tested by predicting the disease status associated with well-characterized ‘validation’ spectra. A variety of techniques also exist for accomplishing this task. In leave-one-out cross-validation, a single spectrum or set of spectra from the training set are omitted from the model-building process, and then the resulting model is used to predict the disease status associated with the spectra left out of the model. By repeating this process a sufficient number of times, it is possible to develop a mathematical estimate of the performance of the model under new conditions. A more rigorous test of the newly-constructed model is to apply the model to an entirely new data set, or a ‘test’ set. In this case, the disease status associated with each spectrum is known, but the ‘test’ spectra are collected at a different time (e.g., subsequent to model-building) than the training data. By comparing the predictions on the ‘test’ data to the reference values associated with these data, the diagnostic accuracy of the model in question can be assessed independent of the training data.
Example Embodiments of Tissue Fluorescence Measurements
In this study, several fluorescence data sets were acquired. Three different sets of emission scans were collected at 2.5-nm data spacing: (1) λx=325 nm, λm=340-500 nm, (2) λx=370 nm, λm=385-500 nm, and (3) λx=460 nm, λm=475-550 nm. In addition, three different sets of excitation scans (2.5 nm data spacing) were also collected: (1) λm=460 nm, λx=325-445 nm, (2) λm=520 nm, λx=325-500 nm, and (3) λm=345 nm, λx=315-330 nm. A lower-resolution (10-nm data spacing) excitation-emission map (EEM) was also collected, along with skin reflectance data spanning the range of excitation and emission wavelengths used in the fluorescence data acquisition. These data sets and their corresponding wavelength regions are depicted graphically in
Two different multivariate models were constructed with these training data. The first model classifies new measurements according to their apparent diabetic status. The second model quantifies diabetes-induced chemical changes using the FPG reference values as a surrogate for skin-collagen AGE content.
Classification of Tissue Disease Status
After the completion of the training data collection, all of the noninvasive measurements were pooled along with the reference information (self-reported diabetes status, FPG and OGTT reference values). Post-processing, including intrinsic fluorescence correction using the method described in Eq. 3 with k=0.5 and n=0.7, was first performed on all fluorescence data. The results presented here were obtained by combining the three excitation scans described above into a single large fluorescence spectrum. The PCA factor analysis method was used to reduce the dimensionality of this data set, and QDA was used to construct a classifier using the scores on 5 of the first 25 principal components using the separability index indicated in Equation 6 to identify those PCA factors most useful for class discrimination. The diagnostic accuracy of the QDA classifier was assessed using the method of leave-one-out cross-validation. In this instance, all of the spectroscopic data for a single patient is held out from the training data, an independent QDA model is constructed, and the posterior probability of each spectrum's membership in the diabetic class is computed.
One way of summarizing the diagnostic accuracy of the QDA classifier is to plot the True Positive Fraction (i.e., the sensitivity) vs. False Positive Fraction (i.e., 1-specificity) for a range of test thresholds. The area under the resulting Receiver-Operator Characteristic (ROC) curve approaches unity for a perfect classification test and approaches 0.5 for tests that are no better than random chance. The ROC curve from the QDA cross-validation procedure described above is shown as the solid line in
Quantitation of Diabetes-Induced Chemical Modifications
Rather than using fluorescence measurements to directly assign a diabetes disease status to an unknown specimen, it can be valuable to generate a quantitative measure of chemical changes that is related to the presence or progression of diabetes. For example, skin biopsies can be assayed for the concentration of pentosidine, CML, or another skin collagen or elastin AGE. Those reference values can be used in the construction of a multivariate model as described above. In the current example, such reference data were not available, and the FPG values collected during the training phase were used as surrogates for this chemical information.
A quantitative PLS calibration model was constructed from the same corrected fluorescence data described above. The results presented here were obtained by combining the three excitation scans described above into a single large fluorescence spectrum. A total of three latent variables, or PLS factors, were constructed from the noninvasive fluorescence data and used to model the variation in the FPG reference values. Because most of the fluorescence wavelengths are centered around the CLF window, the spectroscopic changes are presumed to originate, at least in part, with collagen crosslinking and associated diabetes progression. As a result, it is not expected that the FPG test values will serve as perfect surrogates for disease progression.
Results of a cross-validation in which all data from a single study participant were rotated out in each iteration are presented in
Although a quantitative model for diabetes-related chemical changes might report only a test value (i.e., without rendering a classification regarding the tissue's disease status), it is also possible to use the output of such a model for classification purposes. One example of such a procedure is illustrated in
Example Tissue Fluorescence Measurement Apparatus
Components or sub-systems of an apparatus to characterize and/or quantify disease state by tissue fluorescence are illustrated in
Example I of such a system embodies a high-intensity arc lamp, shutter, monochromator and collimator as the core elements of the light source. The optical-coupling sub-system is comprised of a bifurcated fiber bundle that couples the excitation light to the tissue and collects fluorescence emanating from the tissue. The second leg of the bifurcated bundle couples the collected fluorescent light to the detection sub-system. The detection system contains a monochromator (separate from the monochromator of component A) and a detector such as a photomultiplier. The electrical signal corresponding to the tissue fluorescence is digitized, processed and stored by a computer (Component D). The computer also controls functions of other sub-systems such as the tuning of monochromators and opening closing shutters.
In Example II, the bifurcated fiber-optic bundle of Example I is replaced by a system of lenses and mirrors to convey excitation light from the light source to the tissue and then collect emitted fluorescence from the tissue and relay it to the detection sub-system.
In Example III, the broadband light source of Example I consisting of the high-intensity arc lamp and monochromators is replaced by one or more discrete sources such as LEDs or laser diodes. The LEDs can require suitable optical bandpass filters to produce excitation light that is sufficiently narrow in wavelength. The LEDs or laser diodes can be operated in a continuous wave, modulated or pulsed manner. The output of these sources is coupled to the tissue by an optical sub-system such as the fiber optic bundle of Example I or a collection of mirrors and/or lenses as described for Example II.
In Example IV, the detection system of Example I comprised of a monochromators and single detector is replaced by a spectrograph and a detector array or CCD array.
An example of a skin fluorimeter is presented in
It can be useful to preferentially collect information from the dermis.
As discussed previously, it can also be useful to preferentially collect information from the dermis via multiple channels to allow for measurement of optical properties of tissue.
Combination with Blood Tests
Measurement of fluorescence properties of tissue as described above has been found to provide a useful determination of disease state. The addition of one or more blood tests such as FPG, HbA1c, casual glucose, fructosamine, 1,5-anhydro-D-glucitol, 50 gram glucose challenge test, (high sensitivity) C-reactive protein, lipids, lipid fractions, (fasting) insulin, adiponectin, ferritin, apoB, interleukin-1 receptor antagonist, interleukin-6, plasminogen activator inhibitor 1, von Willebrand factor, sex hormone-binding globulin, serum advanced glycation endproducts (AGEs), the receptor for advanced glycation endproducts (RAGE), the soluble form of RAGE (sRAGE) and/or other biological analytes as inputs to the multivariate model has been found to provide a determination of disease state that can be more effective than any of the tests alone because each test contains a level of independent information regarding disease state. The blood tests can be performed by point-of-care in vitro chemistry analyzers or laboratory grade analyzers and the measurement results can be entered into the SCOUT device via the operator console or via electronic or optical communication means such as an RS-232 serial port, universal serial bus, radio, cellular radio, infrared means, Ethernet, firewire, WiFI, WiMax, Bluetooth and other wireless, optical or wired communication means.
When developing the multivariate model, for a given spectral measurement, the raw or transformed value of HbA1c, FPG, casual glucose, fructosamine, 1,5-anhydro-D-glucitol, or a combination of any of the preceding, can be appended to the spectral data points and then the multivariate calibration methods described above can commence. For example, if a fluorescence spectrum for a given measurement has 100 wavelengths of information and the HbA1c value is appended, then the resulting vector used for the multivariate calibration will be 101 points long. If there were 500 spectral measurements and 500 corresponding HbA1c measurements, the multivariate calibration would use the resulting 500×101 element matrix. If more tests are appended to the spectral measurements (e.g. FPG, casual glucose, fructosaminie 1,5-anhydro-D-glucitol, 50 gram glucose challenge test, (high sensitivity) C-reactive protein, lipids, lipid fractions, (fasting) insulin, adiponectin, ferritin, apoB, interleukin-1 receptor antagonist, interleukin-6, plasminogen activator inhibitor 1, von Willebrand factor, sex hormone-binding globulin, serum advanced glycation endproducts (AGEs), the receptor for advanced glycation endproducts (RAGE), the soluble form of RAGE (sRAGE) and other biological analytes or a combination of any of the preceding), then each measurement vector grows accordingly. As for transformations of the appended tests, examples include variance scaling, logarithmic transformation (natural log, log 10, log 2, etc.), Z-scoring, adjustment for subject age, square roots, etc. An effect of the transform, if employed, is to make the data more linear and/or parsimonious with the spectral data to build a stronger and more accurate model. After the multivariate model is developed, the appropriate test or tests and spectral measurement are inputs into the resulting model (tests can be transformed ahead of input into the model) and are used to determine the tissue state.
In other instances, it may be desirable to create a model that uses a disease state assessment derived solely from the spectroscopic data and then used the output of the spectroscopic model in combination with one or more additional test results (e.g. FPG, casual glucose, fructosamine 1,5-anhydro-D-glucitol, 50 gram glucose challenge test, (high sensitivity) C-reactive protein, lipids, lipid fractions, (fasting) insulin, adiponectin, ferritin, apoB, interleukin-1 receptor antagonist, interleukin-6, plasminogen activator inhibitor 1, von Willebrand factor, sex hormone-binding globulin, serum advanced glycation endproducts (AGEs), the receptor for advanced glycation endproducts (RAGE), the soluble form of RAGE (sRAGE) and other biological analytes or a combination of any of the preceding). In this scheme, the final disease state results from a subsequent model (the “aggregation model”) that combines the separate results of the various tests in order to make a final disease state assessment. The aggregation model can take the form of a lookup table, a linear combination of test results with weighting coefficients, a decision tree, a nonlinear combination of test results, or some combination of these strategies.
The dashed line, diagonal in the graph, represents the performance of a purely chance determination. The black, double-dash curve, above the chance diagonal but lowest of the other curves in the figure, represents the performance of the skin fluorescence measurement by itself. The area under the curve (AUC) of this test is 0.67, representing an improvement over chance (whose area under the curve is defined to be 0.5). The red dotted curve, just above the black curve on the figure, represents the performance of a fasting plasma glucose test (FPG). The AUC of this test is 0.71, an improvement over the skin fluorescence test and a further improvement over chance. The green dash-dot curve, just above the red curve at most points in the figure, represents the performance of an HbA1c test. The AUC of this test is 0.72, an improvement over the FPG test. The blue solid curve, at the top of the figure, represents the performance of a test according to an example embodiment of the present invention, where the HbA1c value of a subject was used as an input to a multivariable model along with the fluorescence properties of the subject. The AUC of the example embodiment test is 0.74, an improvement over all the individual tests. In
The present invention can also provide for determination of disease state that reduces the need for invasive tests such as HbA1c, FPG, casual glucose, fructosamine, 1,5-anhydro-D-glucitol, a 50 gram glucose challenge test, (high sensitivity) C-reactive protein, lipids, lipid fractions, (fasting) insulin, adiponectin, ferritin, apoB, interleukin-1 receptor antagonist, interleukin-6, plasminogen activator inhibitor 1, von Willebrand factor, sex hormone-binding globulin, serum advanced glycation endproducts (AGEs), the receptor for advanced glycation endproducts (RAGE), the soluble form of RAGE (sRAGE) or other biological analytes. A fluorescence measurement such as those described above can first be taken and the analysis performed on a model that does not include HbA1c, FPG, casual glucose, fructosamine, 1,5-anhydro-D-glucitol, a 50 gram glucose challenge test, (high sensitivity) C-reactive protein, lipids, lipid fractions, (fasting) insulin, adiponectin, ferritin, apoB, interleukin-1 receptor antagonist, interleukin-6, plasminogen activator inhibitor 1, von Willebrand factor, sex hormone-binding globulin, serum advanced glycation endproducts (AGEs), the receptor for advanced glycation endproducts (RAGE), the soluble form of RAGE (sRAGE) or other biological analytes as an input. The fluorescence measurement can be performed noninvasively, and does not require a blood draw or fasting. Analysis of the fluorescence test can indicate whether the disease state of the subject is clear from the fluorescence test; if it is clear (either clearly disease present or clearly no disease present), then no invasive test is needed. In cases where the fluorescence test does not provide a clear answer, an invasive test can be performed. For example, the analysis of the fluorescence test can provide a metric whose value indicates likelihood of disease. For values below a first threshold, the test can indicate “no disease”. For values above a second threshold, the test can indicate “disease”. For values between the first and second thresholds, the test can indicate “equivocal, follow up test needed”.
In many cases the fluorescence test will provide a definitive result and thus the number of invasive tests necessary can be greatly reduced relative to current practice. The invasive test can be used as conventionally performed, with the present invention then providing the benefit of reducing the number of invasive tests required. The invasive test can also be used as an input to a multivariate model, along with the fluorescence information, to provide an accurate test as described above.
In addition to using FPG, HbA1c, casual glucose, fructosamine, 1,5-anhydro-D-glucitol, 50 gram glucose challenge test, (high sensitivity) C-reactive protein, lipids, lipid fractions, (fasting) insulin, adiponectin, ferritin, apoB, interleukin-1 receptor antagonist, interleukin-6, plasminogen activator inhibitor 1, von Willebrand factor, sex hormone-binding globulin, serum advanced glycation endproducts (AGEs), the receptor for advanced glycation endproducts (RAGE), the soluble form of RAGE (sRAGE) and/or other biological analytes or a combination of any of the preceding, as inputs to the multivariate model, the measurement of fluorescence properties of tissue as described above and one of the aforementioned tests can be used in a two dimensional, look-up table format to determine disease state, examples of which are shown in Tables 1 and 2. The skin fluorescence measurement can determine the row of the table and, for example, the HbA1c value (or FPG, casual glucose, fructosamine, 1,5-anhydro-D-glucitol value, 50 gram glucose challenge test, (high sensitivity) C-reactive protein, lipids, lipid fractions, (fasting) insulin, adiponectin, ferritin, apoB, interleukin-1 receptor antagonist, interleukin-6, plasminogen activator inhibitor 1, von Willebrand factor, sex hormone-binding globulin, serum advanced glycation endproducts (AGEs), the receptor for advanced glycation endproducts (RAGE), the soluble form of RAGE (sRAGE) or other biological analyte) can determine the column to assess the disease state (normal, pre-diabetes, diabetes) for a given individual. In the tables, SCOUT DS, a trademark of VeraLight, Inc, refers to a fluorescence test such as those described herein.
Those skilled in the art will recognize that the present invention can be manifested in a variety of forms other than the specific embodiments described and contemplated herein. Accordingly, departures in form and detail can be made without departing from the scope and spirit of the present invention as described in the appended claims.
This application claims priority to U.S. provisional application 61/420,444 filed Dec. 7, 2010; and claims priority as a continuation in part of U.S. application Ser. No. 11/964,675 filed Dec. 26, 2007; and as a continuation in part of U.S. application Ser. No. 11/561,380 filed Nov. 17, 2006, which application was a continuation of U.S. application Ser. No. 10/972,173 filed Oct. 22, 2004, now U.S. Pat. No. 7,139,598 issued Nov. 21, 2006, “Determination of a Measure of a Glycation End-Product or Disease State Using Tissue Fluorescence;” which was a continuation in part of U.S. application Ser. No. 10/116,272 filed Apr. 4, 2002, now U.S. Pat. No. 7,043,288 issued May 9, 2006, “Apparatus And Method For Spectroscopic Analysis Of Tissue To Detect Diabetes In An Individual,” and claimed the benefit of U.S. provisional application 60/515,343 filed Oct. 28, 2003, “Determination of a Measure of a Glycation End-Product or Disease State Using Tissue Fluorescence”; and claimed the benefit of U.S. provisional application 60/517,418 filed Nov. 4, 2003, “Apparatus And Method For Spectroscopic Analysis Of Tissue To Determine Glycation End-products,”. Each of the preceding applications is incorporated herein by reference.
Number | Date | Country | |
---|---|---|---|
61420444 | Dec 2010 | US | |
60515343 | Oct 2003 | US | |
60517418 | Nov 2003 | US |
Number | Date | Country | |
---|---|---|---|
Parent | 10972173 | Oct 2004 | US |
Child | 11561380 | US |
Number | Date | Country | |
---|---|---|---|
Parent | 11964675 | Dec 2007 | US |
Child | 13311282 | US | |
Parent | 11561380 | Nov 2006 | US |
Child | 11964675 | US | |
Parent | 10116272 | Apr 2002 | US |
Child | 10972173 | US |