FLIP-DOWN TABLE-SAW FENCE

Abstract

Disclosed herein is a totally new cabinet-making industry GAME-CHANGER. So revolutionary and different that it is hard for the average wood worker or cabinet maker to understand just by looking at it. It is best understood by watching a video of it being used. A video will be supplied. For example, a cabinet can easily be cut and assembled as little as two minutes.

Description

INTRODUCTION

Cabinet-making is a long established industry. However, it is long overdue for a revolutionary advancement that will significantly reduce the time, labor, and costs to produce cabinets. The FTF system herein described will do exactly that.

STATEMENT REGARDING FEDERALLY SPONSORED RESEARCH OR DEVELOPMENT

Not Applicable

REFERENCE TO A “SEQUENCE LISTING”

Not Applicable

BACKGROUND OF THE INVENTION

In the field of cabinetmaking, there is a great deal of math involved. A typical kitchen base cabinet with 1 drawer will have 2 cabinet sides, 1 top, 1 bottom, 1 back, 1 shelf, 1 drawer bottom, 1 drawer box front, 1 drawer box back and 2 drawer box sides. Not counting the doors or the decorative drawer front or toe kick, there are 11 parts to the typical base cabinet box construction. Each part has 3 dimensions, thickness, width and length. 11 parts×3 dimensions each is a total of 33 dimensions per cabinet box. Multiply that by the number of cabinet boxes in the average kitchen and there is a great deal of math to do. Not only that, all those parts have to be cut to those sizes. All the width and lengths will typically be cut on a table saw. This requires a great deal of time to do the math and keeping track of all the different sizes to accurately cut all the parts. Because of normal human error, this process is prone to mistakes and parts wasted. Those mistakes can cost a great deal of time and money to go back and fix eating away at any profits.

For the normal kitchen base cabinets, the height and depth are always the same. Call those dimensions “CONSTANTS”. Example, The sides of the cabinet are a function of both the height and depth and are the same whether the cabinet is 10 inches wide or 30 inches wide. It is efficient to stock cabinet parts with standard heights and depths. The sides can be pre-cut to their height and depth, routed and drilled with holes and be done in high volume more efficiently then job by job. With all the set-ups that have to be accurate, running these parts in high volume will save a lot of time per part. Or ordered the parts that way. The other “CONSTANTS” (the top, bottom, back, shelf, drawer bottom, and drawer front and back) can be machined in 8 foot lengths in high volume while the business is in the slow seasons or ordered this way.

It is only the width that changes. Anything that is a function of the width, (the top, bottom, back, shelf, drawer bottom, and drawer front and back) are the parts that are different sizes, which we will call VARIABLES. Each of these variables will be a given dimension smaller than the width of the cabinet. Example. The width (the dimension from left to right) of the adjustable shelf is the width of the cabinet minus the thickness of 2 sides and a small gap. That means a different math calculation and a different table-saw setting required for every one of those parts. Even for those with experience, between the math and settings on the table saw, every single part you have to be careful not to make a mistake. The patterns that I noticed, was that each part individually was always the same dimension smaller then the width of the cabinet. I could eliminate the math and the multiple different settings on the saw if I had spacers for each part that were those given dimensions smaller than the width of the cabinet. So, I only have to set the saw fence to the width of the cabinet to be built. By putting a dimensioned spacer between the fence and the blade, next to the saw fence specific to each part to adjust the width of the cut to given part. As long as you accurately set the fence to the size of cabinet you wish to cut, You not only completely eliminate the math needed, but using the appropriate spacers, every part is cut perfect every time with just one setting of the fence for each cabinet. This allowed me to cut up cabinets faster then anything other system out there. Creating a way to keep the spacers handy, yet out of the way when not needed took years of trial and error and hundreds of hours of planning and drawing. The solution finally started when I was playing with hinging the spacers to move them in place and then out of the way. Having the need to use multiple spacers got real tricky. I could envision the final product, but making all the geometry of all the different spacers took many evolutions of prototypes. This Flip-down Table-saw Fence will work on most cabinets. From base cabinets to upper cabinets and tall cabinets. Garage, Bathroom Kitchen, laundry or just about any cabinet in any location.

BRIEF SUMMARY OF THE INVENTION

The “Flip-Down Table-saw Fence” is a tool to Accurately cut up cabinet parts faster while eliminating the need to do math and without the use of a tape measure. Currently, Human error in the math and settings of the fence on the table saw contribute to costly errors when cutting the material.

Human error will always exist. The purpose of the Flip-down Table-saw fence, is to eliminate a great deal of it and speed up the process at the same time.

BRIEF DESCRIPTION OF DRAWINGS

FIG. 1: End view of Actual size of Flip-down Table-saw Fence sitting on standard table-saw fence

FIG. 2: Exploded end view of Flip-down Table-saw Fence

FIG. 3: Isometric view of Part #101. The“Saddle” that site on top of normal Table-saw fence

FIG. 4: Isometric view of Part #105. The Top, Bottom and back spacer

FIG. 5: Isometric view of Part #109. The Shelf spacer

FIG. 6: Isometric view of Part #115. The Drawer spacer

FIG. 7: End views of the different settings

FIG. 8: End views of the different settings and attempt to show the parts in motion.

DETAILED DESCRIPTION OF THE INVENTION

For the normal kitchen base cabinets, the height and depth are always the same. Call those dimensions “CONSTANTS”. Example, The sides of the cabinet are a function of both the height and depth and are the same whether the cabinet is 10 inches wide or 30 inches wide. It is efficient to stock cabinet parts with standard heights and depths. IE . . . “CONSTANTS”. The sides can be pre-cut to their height and depth, routed and drilled with holes and be done in high volume more efficiently then job by job. With all the set-ups that have to be accurate, running these parts in high volume will save a lot of time per part. Or order the parts that way. The other “CONSTANTS” (the top, bottom, back, shelf, drawer bottom, and drawer front and back) can be machined in 8 foot lengths in high volume while the business is in the slow seasons or ordered this way.

On most cabinets, it is only the width of the cabinet that changes. Anything that is a function of the width, (the top, bottom, back, shelf, drawer bottom, and drawer front and back) are the parts that are different sizes left to right, which we will call “VARIABLES”. Only the “VARIABLES” need to be cut! Each of these “VARIABLES” will be a given dimension smaller than the width of the cabinet. Example. The width (the dimension from left to right) of the adjustable shelf is the width of the cabinet minus the thickness of 2 sides and a small gap. That means a different math calculation and a different table-saw setting required for every one of those parts. Even for those with experience, between the math and settings on the table saw, on every single part, care has to be taken not to make a mistake. Each part individually is always the same dimension smaller then the width of the cabinet. The math and the multiple different settings on the saw could be eliminated by putting a pre-calibrated dimensioned spacer specific to each part next to the saw fence on the blade side to adjust the width of the cut to a given part. The saw fence only has to be set once to the desired width of the cabinet to be built. As long as the fence is accurately set to the size of cabinet to be built, not only is the math needed completely eliminated, but using the appropriate spacers, every part is cut perfect every time with just one setting of the fence for each cabinet. This System will cut up cabinets faster then any other system available.

This Flip-down Table-saw Fence system will work on most cabinet construction systems. From base cabinets to upper cabinets and tall cabinets. Garage, bathroom kitchen, laundry or just about any cabinet in any location.

The flip-down Table-saw Fence is designed to streamline custom cabinetmaking by eliminating the math needed to correctly cut parts accurately and efficiently with the use of pre-calibrated spacers that conveniently move into place and move out of the way when not in use. The table saw fence only needs to be set once to the desired width of the cabinet to be built. Before cutting the individual parts, put the correct spacer in place parallel to the table saw fence on the blade side. In this example we use a hinged spacer. The design in this example allows the 3 separate spacers in different combinations to flip down when needed and flip up out of the way when not needed.

The design here will show one way to do it using aluminum extrusions that friction fit on top of the table saw fence machined to hinge at certain pivot points. It can be made out of almost any structural material such as composites, polymers or metals. Although lighter weight materials are preferred. The spacers can be removed and replaced by a variety of means. In this example, a hinging system was machined to remove and replace the spacers. The spacers could be hinged using a flexible polymer similar to duct tape but more durable. Another option, The spacers could simply be set into a rack that sat on the table saw fence or somewhere nearby. The principle here is the spacers save time and money by accurately offsetting the cutting of parts the first time.

In this example, to use this fence, simply set the Flip-down Table saw Fence on top of the existing table saw fence with the hinged side facing the blade and press down on it. (See FIG. 1 and FIG. 7 Example A).

Set the hairline on the table saw fence to the desired width of the cabinet. Flip down the first spacer, (FIG. 4, Part 105) and (FIG. 7 Example B) and cross cut the cabinet back, bottom and top to the correct width.

Without resetting the table saw fence, flip down the second spacer, (FIG. 5, Part 109) and (FIG. 7, Example C) and crosscut all the shelves to the correct width,

Without resetting the table saw fence, flip up the second spacer, (FIG. 5, Part 109) and (FIG. 7, example B) Then flip down both the second spacer (FIG. 5, Part 109) and the third spacer (FIG. 6, Part 115) simultaneously to Position D in (FIG. 7, Example D). At this point you crosscut the ¼″ thick drawer bottom using the position of spacer 109 in FIG. 5, and crosscut the drawer front and back with a miter gauge using the position of spacer 115 in FIG. 6, as in FIG. 7 example D. This will accurately cut to width all the parts “The Variables” to make a custom width cabinet.

To distinguish this from other similar inventions, at this time, the closest thing to accurately cutting parts without the use of math or tape measures requires expensive software and a even more expensive CNC machine. Not to mention the expensive training and the time it takes to learn how to use it. This Flip-down Table-saw Fence is actually faster than it's expensive CNC counterpart.

This is not an improvement of an existing idea. This is a completely original idea.

Anyone who is already making cabinets and is trained to use a table saw properly, can learn to use the Flip-down Table-saw Fence in as little as 5 minutes.

OBJECT AND SUMMARY OF THE INVENTION

A principle objective of the present invention is to provide for the first time a revolutionary mechanism for significantly reducing the time, labor, and costs to produce cabinets. There is no similar mechanism, device, or system in existence according to a preliminary patent search. The FTF mechanism will eliminate manually entering the height, depth, and width for each different part to be cut.

The FTF mechanism can be added on to an existing table-saw fence or a fully integrated flip-down table-saw fence. When the Flip-down Fence is up it will not change the size of normal settings; the table-saw fence with the flip-down fence on it can still be used for all regular cuts.

Because of the different drawer systems and the various cabinet construction techniques, the FTF system has the option for two separate flip-down fences on each system.

The FTF mechanism has three flip-down parts. Each flip-down part has to be flipped down only once for each part to be cut during a production run. This will lead to a very long life for each FTF mechanism with no need for regular servicing such as for saws, saw blades, drills, nail guns, etc.

GLOSSARY

Constants: The parts of a cabinet that doesn't change from one cabinet to the next.

Fence: A part for a table saw that holds a piece to be cut a preset distance from the saw blade.

Flip-Down Fence (FDF): A mechanism that can be attached to a table saw to allow for different distances from the saw blade for each different part to be cut to be established by simply flipping down the flip-down that provides the required distance.

FDF-Flip-Down Fence (FDF): A mechanism that can be attached to a table saw to allow for different distances from the saw blade for each different part to be cut to be established by simply flipping down the flip-down that provides the required distance.

Flip-down Table-saw Fence (FTF): A mechanism that can be attached to a table saw that has three fences hinged together in such a manner as to allow for three different distances from the saw blade to be achieved by simply flipping down the appropriate fence.

FTF-Flip-down Table-saw Fence. A mechanism that can be attached to a table saw that has three fences hinged together in such a manner as to allow for three different distances from the saw blade to be achieved by simply flipping down the appropriate fence.

VARIABLES: The parts of a cabinet that differ from one cabinet to the next.

Claims

1. (canceled)

2. (canceled)

3. (canceled)

4. (canceled)

5. (canceled)

6. (canceled)

7. An apparatus for adjusting a width of a cut by a table saw, comprising: a saddle for setting on a fence of the table saw, a side of the fence defining the width of the cut; andat least a first spacer hinged to the saddle such that the first spacer can be flipped down about a first pivot point to be disposed adjacent to the side of the fence shortening the width of the cut by a first spacer width.

8. The apparatus of claim 7, wherein the saddle obtains a friction fit across opposite sides of the fence of the table saw.

9. The apparatus of claim 7, wherein the saddle is integrated into the fence of the table saw.

10. The apparatus of claim 7, wherein the first spacer comprises an L-shape, the first pivot point is disposed at a top of the L-shape coupled to a side of the saddle, a bottom or the L-shape comprises the first spacer width.

11. The apparatus of claim 7, further comprising a second spacer hinged to the first spacer such that, after flipping down the first spacer, the second spacer can be flipped down about a second pivot point shortening the width of the cut by a second spacer width in addition to the first spacer width.

12. The apparatus of claim 11, wherein the first spacer comprises an L-shape, the first pivot point is disposed at a top of the L-shape coupled to a side of the saddle, a bottom of the L-shape comprises the first spacer width; and the second spacer comprises a straight length, the second pivot point is disposed at an end of the straight length coupled to an end of the bottom of the L-shape, and a length of the straight piece comprises the second spacer width.

13. The apparatus of claim 11, further comprising a third spacer hinged to the second spacer such that, after flipping down the first spacer but without flipping down the second spacer, the third spacer can be flipped clown about a third pivot point shortening the width of the cut by a third spacer width in addition to the first spacer width.

14. The apparatus of claim 13, wherein the first spacer comprises an L-shape, the first pivot point is disposed at a top of the L-shape coupled to a side of the saddle, and a bottom of the L-shape comprises the first spacer width; the second spacer comprises a straight length, the second pivot point is disposed at an end of the straight length coupled to an end of the bottom of the L-shape, and a length of the straight piece comprises the second spacer width; andthe third spacer comprises a wedge piece, the third pivot point is disposed at a top of the wedge piece coupled to a midpoint: of the second spacer, and a width of the wedge piece comprises the third spacer width.

15. An apparatus for adjusting a width of a cut by a table saw, comprising: as saddle for setting on a fence of the table saw, a side of the fence defining the width of the cut; anda first spacer comprising an L-shape having a first pivot point disposed at a top of the L-shape hinged to a side of the saddle such that the first spacer can be flipped down about the first pivot point to be disposed adjacent to the side of the fence shortening the width of the cut by a bottom of the L-shape, the bottom of the L-shape comprising a first spacer width.

16. The apparatus of claim 15, wherein the saddle obtains a friction fit across opposite sides of the fence of the table saw.

17. The apparatus of claim 15, wherein the saddle is integrated into the fence of the table saw.

18. The apparatus of claim 7, further comprising a second spacer hinged to the first spacer such that, after flipping down the first spacer, the second spacer can be flipped down about as second pivot point shortening the width of the cut by a second spacer width in addition to the first spacer width; wherein the second spacer comprises a straight length, the second pivot point is disposed at an end of the straight length coupled to an end of the bottom of the L-shape, and a length of the straight piece comprises the second spacer width.

19. The apparatus of claim 18, further comprising a third spacer hinged to the second spacer such that, after flipping down the first spacer but without flipping down the second spacer, the third spacer can be flipped down about a third pivot point: shortening the width of the cut by a third spacer width in addition to the first spacer width; wherein, the third spacer comprises a wedge piece, the third pivot point is disposed at a top of the wedge piece coupled to a midpoint of the second spacer, and a width of the wedge piece comprises the third spacer width.

20. A method for adjusting a width of a cut by a table saw, comprising: setting as saddle on a fence of the table saw, a side of the fence defining the width or the cut; andflipping down at least a first spacer hinged to the saddle about a first pivot point to be disposed adjacent to the side of the fence shortening the width of the cut by a first spacer width.

21. The method of claim 20, further comprising flipping down a second spacer hinged to the first spacer about a second pivot point, after flipping down the first spacer, such that the second spacer shortens the width of the cut by a second spacer width in addition to the first spacer width.

22. The method of claim 21, further comprising flipping down a third spacer hinged to the second spacer about a third pivot point, after flipping down the first spacer but without flipping down the second spacer, such that: the third spacer shortens the width of the cut by a third spacer width in addition to the first spacer width.

23. The method of claim 22, wherein the first spacer comprises an L-shape, the first pivot point is disposed at a top of the L-shape coupled to a side of the saddle, and a bottom of the L-shape comprises the first spacer width; the second spacer comprises a straight length, the second pivot point is disposed at an end of the straight length coupled to an end of the bottom of the L-shape, and a length of the straight piece comprises the second spacer width; andthe third spacer comprises a wedge piece, the third pivot point is disposed at a top of the wedge piece coupled to a midpoint of the second spacer, and a width of the wedge piece comprises the third spacer width.

24. The method of claim 20, wherein setting the saddle on the fence comprises obtaining a friction fit across opposite sides of the fence of the table saw.

25. The method of claim 20, wherein the saddle is integrated into the fence of the table saw.