The invention is directed to uniquely homogeneous dispersions of nanometer-sized materials in halogen-containing polymers.
To materials engineers, composites offer the ability to alter the properties of materials by combining the functionalities of several components for a specific purpose. It is widely believed that, for example, ceramic/polymer nano-engineered composites can be designed to exhibit the overriding strength, dimensional, and thermal stability of ceramics with the fracture properties, processability, and dielectric properties of polymers. “Matrix Nanocomposites” are a new class of materials, which exhibit ultra-fine dispersed phase dimensions, typically in the 1-100 nm range as well as a physically distinct host or continuous phase over much longer average length scales. The nano-length scale is the range where phenomena associated with atomic and molecular interactions strongly influence the macroscopic properties of materials such as electrical and thermal conductivity, strength, and optical clarity, for example, the longer length scale phase are typically used—in addition to the afore mentioned macroscopic properties—to determine processing and fabrication of the composite.
Preliminary experimental work on nano-composite materials have suggested that many types and classes of nanocomposites have new and improved properties when compared with their macro-scale counterparts (see for example: Ajayan, P.M. Chem. Rev. 1999, 99, 1787). A predominant feature of these materials is their ultra fine phase dimension and hence surface area; therefore a large fraction of the atoms reside at an interface. The properties can therefore be expected to be strongly influenced by the nature of the interface. For example, a strong interface should allow unusual mechanical properties. Since the interface structure plays a critical role in determining the properties of these materials they are frequently referred to as “interface composites”.
To make a successful nanocomposite it is very important to be able to disperse the secondary phase (be it a nanosized metal, ceramic, or polymer) throughout the host material and create those interfaces.
Nanocomposites are now becoming viable commercial products. BIB.: Y. Feng, Y. Ou, Y. Zhongzhen, J. Appl. Polym. Sci., 69(2), 355, 1998.). Most research and development is focused on automotive parts and packaging, and space durable composites (“Fluoropolymer Nanotube Composites for Coatings and Nanoscopic Probes” Shah, H.; Czerw, R.; Carroll, D.; Goldner, L.; Hwang, J.; Ballato, J.; Smith, Jr., D.W. Polym. Mat. Sci. & Eng. (Am. Chem. Soc., Div. PMSE) 2000, 82, 300.), display applications (P.M.Ajayan, O. Stephan, C. Colliex, and D. Trauth, Science, 265, 1212, 1994.), and atomic force microscopy (AFM) probes (Dai, H.; Hafner, J. H.; Rinzler, A. G.; Colbert, D. T.; Smalley R. E. Nature, 1996, 384, 147 and Hafner, H. G.; Cheung, C.; Lieber, C. M. Nature, 1999, 398, 761).
The benefits of such nanocomposites that have already been identified include: efficient reinforcement with minimal loss of ductility, improved impact strength, heat stability and flame resistance, improved gas barrier properties, improved abrasion resistance, reduced shrinkage and residual stress, altered electronic and optical properties (See for example: “Handbook of Nanophase Materials” A. N. Goldstein, Ed., Marcel Dekker, Inc., New York, 1997 and S. J Komarnemi, Mater. Chem., 2, 1219, 1992). The shapes of the particles used in nanocomposites can vary from spherical, fibrilar, to platelets, and each will result in different properties modifications to the host. For example: for maximum reinforcement, platelets or fibrilar particles would be used, since reinforcement efficiency tends to scale with the aspect ratio (L/d). Further, performance benefits of nanoparticulate fillers are available without increasing the density or reducing light transmission properties of the base polymer. Although many research projects have been reported concerning all types of nanoparticles, the most extensive research has been performed with layered silicates, which provides platelet reinforcement.
Matrix nanocomposites, based on polymers, have been a central area of polymer research in recent years and significant progress has been made in the formation of various types of polymer-nanocomposites. This includes an understanding of the basic principles that determine their optical, electronic and magnetic properties. An early polymer nanocomposite that was developed was the polyamide 6 (from caprolactam), which has dispersed ion-exchanged montmorillonite, a smectic clay, as the reinforcement. Such nanocomposites typically contain 2-10% loadings on a weight basis, yet property improvements can equal and sometimes exceed traditional polymer composites even containing 20-35% mineral or glass. Machine wear is reduced and processability is better. Because polymers are, typically, about one-half as density as mineral and glass fillers these composites offer attractive opportunities for weight sensitive applications, such as auto parts.
Fluoropolymers are known to represent viable alternatives to current optical materials particularly for the critical next step in optical communications—access level all-optical networks (Modern Fluoropolymers, Scheirs, J., Ed.; Wiley: New York, 1997).
A pending U.S. patent application, Ser. No. 09/604,748 entitled “Fluoropolymers and Methods of Applying Fluoropolymers in Molding Processes” and assigned to the assignee of the present application is directed to uses of PFCB compounds in molding processes and optical applications.
Other publications have recited various synthesis methods and uses for PFCB and fluoropolymeric compounds. See, i.e. Smith et al, “Perfluorocyclobutyl Liquid Crystalline Fluoropolymers. Synthesis and Thermal Cyclopolymerization of Bis(trifluorovinyloxy)-alpha-methylstilbene”, Macromolecules, Volume 33, Number 4, Pages 1126-1128; See also Smith et. al. “Perfluorocyclobutane (PFCB) polyaryl ethers: versatile coatings materials”, Journal of Fluorine Chemistry 4310 (2000) 1-9. There is great potential for this optical fluoropolymer to further enhance its properties by using it in a nanocomposite where the nanomaterial provides unique interactions with light.
In regards to electrically conductive polymer composites, work has been done using carbon black as a second phase to permit conductivity in an otherwise dielectric host. See Foulger, Stephen: “Reduced Percolation Thresholds of Immiscible Conductive Blends”, Journal of Polymer Science: Part B: Polymer Physics, Vol. 37, 1899-1910 (1999).
Although carbon black was used in the previous case, many forms of carbon exist. For example carbon may be in the form of submicron graphitic fibrils, sometimes called “vapor grown” carbon fibers. Carbon fibrils are vermicular carbon deposits having diameters less than about 1.0 micrometer. They exist in a variety of forms and have been prepared by catalytic decomposition of carbon-containing gases on metal surfaces.
U.S. Pat. No. 4,663,230 discloses cylindrical ordered graphite cores, uncontaminated with pyrolytic carbon. Blending such fibers with polymers has been known to improve the mechanical properties of the resulting blends.
More recently, it has been found that carbon tubes (often termed “nanotubes”) provide a structure with potential for many such applications. In particular, the structure of carbon nanotubes makes their aspect ratio (length/diameter, L/D) comparable to that of long fibers. Typically the aspect ratio of carbon nanotubes is >10,000. Thus, the aspect ratio of carbon nanotubes is generally much greater than that of conventional short fibers, such as those often made of glass or other forms of carbon. In addition, nanotubes sometimes may be lighter than conventional carbon fibers,.which may be helpful in some applications.
Currently, carbon nanofibers and carbon nanotubes figure prominently among the organic-host nanocomposite fillers of interest. Vapor grown carbon nanofibers (VGCFs) in thermoplastic matrices have attracted much interest as they have potential application as conducting polymers for electrostatic dissipative coatings. In addition the VGCFs enhance both stiffness and thermal stability of the matrix. Thermoplastic matrices noted in recent studies include polypropylene, acrylate-butadiene-styrene, polyethylene, polycarbonate and polyether-terephthalate. Naturally, the interactions between the fiber and the matrix at the interfacal level are of critical importance to the properties of the developed composite. The catalytically grown carbon fibers used in these previous studies have outstanding physical properties such as high tensile modulus as well as low electrical resistivity and high thermal conductivity (1,950 W/mK). Further, these nanofibers can be surface-treated to promote different types of bonding. However, electrical and thermal conductivities as well as yield strengths and moduli are orders of magnitude larger for carbon nanotubes and one might want to extend these nanocomposites to include nanotube dispersions instead of VGCFs. This is because network formation at the percolation threshold of nanotubes may be achieved at relatively low mass concentrations because of their unusually high aspect-ratios. Hence, enhanced electrical and thermal conductivity may be possible in polymer/nanotube composites without sacrificing, for example, host optical clarity or flexibility.
Unfortunately, control over dispersive characteristics is significantly more difficult for carbon nanotubes. This comes about because, unlike VGCF, the surfaces of the nanotubes are exceedingly difficult to modify as they exhibit, primarily, unreactive carbon-carbon bonds.
Efforts have been made to incorporate carbon nanotubes into hydrocarbon-based polymeric materials, but difficulty has been encountered in providing compositions that perform well. In general, the number of carbon nanotubes that must be placed into a polymeric composition to achieve superior properties is so high that the actual physical and structural properties of the polymer may be deteriorated by the presence of the carbon nanotubes. This difficulty may be due to the fact that carbon nanotubes tend to clump and aggregate together (instead of uniformly dispersing) when placed in many hydrocarbon-based polymeric compositions.
This relatively poor control over the dispersive characteristics has made it difficult to employ carbon nanotubes in useful applications. The surfaces of such nanotubes may be exceedingly difficult to modify as well, since nanotubes exhibit primarily unreactive carbon-carbon bonds.
What is needed in the industry is a composition and method of preparing a composition that is capable of employing the useful properties of nanomaterial structures in a polymer matrix. A composition that successfully combines nanomaterial structures uniformly dispersed in a polymer matrix would be highly desirable.
The invention is directed to uniquely homogeneous dispersions of nanometer sized materials in halogen-containing polymers. Such compositions may include the use of nanotubes such as carbon-based nanotubes. Furthermore, nanotubes may be mixed into a halogen-containing polymer matrix. A halogen-containing monomer and/or polymer forms a compositional matrix with nanotubes. In some applications, a halogen-containing polymer is combined with nanotubes to achieve a relatively high level of nanotube dispersion. The homogeneity of the dispersion are superior in the invention.
Some specific applications of the invention employ fluoropolymers, while other specific applications may employ chloropolymers as the host polymer. Various products may employ compositions made according to the invention. These products and applications include: light emitting devices, nanoscopic probes, thermal management, electrical conductivity, electromagnetic interference, EMI shielding, linear and nonlinear optics (for example optical limiting), polymer actuation, and stealth (where each material can be in film, fiber, powder, liquid resin, or solution form), and others as well. This list is not exhaustive, and certainly other applications for the compositions exist as well, such as, for example, “dual function” applications involving multiples of the above properties. In particular, polymer electrical conductivity in addition to optical clarity represents a major need in applications requiring light transmission and static charge dissipation (e.g., for space durable optical film).
A number of factors combine to fuel interest in polymer based nanocomposite technology using clay minerals which include low loading levels, transparency, incorporation flexibility, safety, synergies with other additives and low cost. In the past, combinations of clays in such materials have not been compatible with polymers and hence surface modified to render them hydrophobic. Polymers such as polyimide, epoxy resin, polystyrene, polycaprolactone, acrylic polymer and polypropylene have been explored to fabricate polymer nanocomposites using clays which form the main inorganic nanocomposites.
The following Figures illustrate the invention:
a-c show photographs of a PFCB composite;
d-f show photographs of PVDF, as further discussed herein;
a-c include photos of samples of composites of PVDF/HFP, as further discussed herein;
a shows a drawn PFCB fiber containing carbon nanotubes; and
b illustrates a probe having a nanocomposite fiber with a nanotube protruding from the frontal surface of the probe.
Reference now will be made to the embodiments of the invention, one or more examples of which are set forth below. Each example is provided by way of explanation of the invention, not as a limitation of the invention. In fact, it will be apparent to those skilled in the art that various modifications and variations can be made in this invention without departing from the scope or spirit of the invention.
Both organic and inorganic nanomaterials may be combined with halogen-containing monomers or halogen-containing polymers in the practice of the invention. Among the inorganic nanomaterials, some may be based on clays, such as montmorillonite, kaonite, bentonite, mica, talc, silica nanoparticles and the like as further disclosed in Examples below. “Nanocomposite materials” or “nanocomposites” as used herein shall include a class of materials that exhibit ultra-fine phase dimensions, typically in the 1-100 nm range, as well as a physically distinct host phase existing over much longer average length scales. The nano-length scale is the range in which phenomena associated with atomic and molecular interactions strongly influence the macroscopic properties of materials such as electrical and thermal conductivity. Longer length scales may be used to determine processing parameters of the materials. Although the following discussion focuses primarily on polymer/carbon nanotube-based nanocomposites, in general, “nanocomposite materials” and “nanocomposites” as used herein also refers to other nanosized materials such as, but not limited to, those comprised of Group III-through-Group V-elements, transition metal oxides (e.g., vanadium oxide), and others.
Further, in regards to inorganic/polymer nanocomposites there are at least two types of inorganic layered silicate/polymer nanocomposites, i.e. intercalates and exfoliates, depending upon the organization of the silicate layers. Intercalates are obtained when polymer is located between the silicate layers and while the layer spacing is increased. There are attractive forces between the silicate layers which cause the layers to be provided in regularly spaced stacks. Exfoliates are obtained when the layer spacing increases to the point at which there no longer is sufficient attraction between the silicate layers to cause a uniform layer spacing. In exfoliates, silicate layers are randomly dispersed throughout the composite.
Organosilicates may be more compatible with engineering plastics, as they usually contain various functional groups that interact and/or react with the polymer to improve adhesion between the inorganic phase and the matrix.
Various methods of synthesis may be employed:
Carbon nanotubes are one type of nanomaterial (single-walled or multi-walled) that sometimes behave like one dimensional metallic conductors or low band gap semi-conductors. Incorporation of carbon nanotubes in insulating polymer matrices may increase the electrical conductivity of the composites by several orders of magnitude. For purposes of this specification the term “nanotube” shall refer to a nanomaterial that assumes a tubular or cylindrical shape.
Carbon nanotubes may act as nanometric heat sinks. Network formation or percolation threshold of nanotubes may be achieved at relatively low concentrations because of their unusually high aspect ratios. Hence, enhanced electrical and thermal conductivity may be obtained in polymer/nanotube composites, without sacrificing optical clarity, since their diameter is sufficiently small that light is not strongly absorbed or scattered.
It is advantageous in many industries (including electronics, optoelectronics, and aerospace) to have mechanically flexible electrically and thermally conductive coatings and substrates. In addition, composites possessing these features and optical clarity are desired. In the present invention, the halopolymer nanocomposites possess the requisite thermal and electrical conductivities. More specifically, for aerospace structures, a conductivity of ca. 10-7 S/cm is needed for static charge dissipation. Further, management of thermal cycles on aerospace structures also is desired. The halopolymer nanocomposites exhibit adequate thermal and electrical conductivity for these applications while maintaining mechanical flexibility and toughness as well as optical clarity. This is realized through the unique level of dispersion for very low loadings (<0.1 to 5 weight %) of high conductivity nanotubes afforded by the halopolymer host comprised in the nanocomposites disclosed in the invention.
It has been found that halogen-containing polymers exhibit unique compatibility with carbon nanotubes, and that such nanotubes may be dispersed by simple solution or melt processes to provide unique levels of homogeneity. In this invention, the dispersion properties of carbon nanotubes are disclosed for several halogen-containing polymer matrix formations.
In making the compositions of the invention, it is possible to combine nanotubes with halogen-containing monomers. It also is possible to combine nanotubes with halogen-containing polymers. That is, polymerization may occur either before or after application of nanotubes, depending upon the particular application. Copolymers also may be used.
The invention is comprised, in one embodiment, of a composition prepared by combining nanomaterials with a halogen-containing polymer or monomer to form a nanocomposite. In one application of the invention, carbon nanotubes may be dispersed in a halogen-containing polymer by melt or solution processing to form a nanocomposite. Furthermore, at low nanotube loading levels, the resulting composition may be formed into a transparent film, fiber, powder, liquid resin, or solution.
A “halogen-containing polymer” or “halogen-containing monomer” as described herein and as employed in the invention may include essentially any or all Group VII elements within a polymeric structure. The halogen species may be fluorine, chlorine, bromine or iodine, for example, depending upon the particular application.
In one specific aspect of the invention, the halogen-containing polymer comprises a fluoropolymer such as those derived from monomers containing trifluorovinyl ether (TFVE) groups (as initially described in: “Fluoropolymer Nanotube Composites for Coatings and Nanoscopic Probes” Shah, H.; Czerw, R.; Carroll, D.; Goldner, L.; Hwang, J.; Ballato, J.; Smith, Jr., D. W. Polym. Mat. Sci. & Eng. (Am. Chem. Soc., Div. PMSE) 2000, 82, 300).
Whereas these polymers are receiving consideration for structural composites, there are commercial applications of equal importance for optical composites. From a potential host materials perspective, perfluorocyclobutane (PFCB) polymers have suggested for use in optical fibers and dielectric waveguides. See, for example, “Property Tunable Perfluorocyclobutyl (PFCB) Copolymers for Optical Devices” Smith, Jr., D. W.; Kumar, S.; Chen, S.; Ballato, J.; Nelson, E.; Jin, J.; Foulger, S. in Design, Manufacturing, and Testing of Planar Optical Waveguide Devices, R. A. Norwood, Ed. SPIE Proc. 2001, 4439, 51-62.
In specific applications, the fluoropolymer may comprise a perfluorocyclobutane (PFCB) aromatic ether moiety, as further discussed herein. In still other applications, other halogen-containing polymers or monomers or copolymers may be employed, including copolymers of PFCB, polyvinylidenedifluoride (PVDF), and copolymers of PVDF.
Other fluoropolymers and chloropolymers that may be employed include those polymers and copolymers made from monomers such as: perfluoroallyl vinyl ethers, chlorotrifluoroethylene, fluorovinyl ethers, hexafluoroisobutylene, hexafluoropropylene, hexafluoropropylene oxide, perfluorormethyl vinyl ether, perfluoroalkyl vinyl ether, fluoroalkylacrylates, fluoroalkylmethacrylates, tetrafluoroethylene, vinylidene dichloride, vinyl fluoride, vinylidene difluoride, trifluoroethylene, and vinyl chloride. Some commercial trade names for fluoropolymers which may be employed include: Teflon, Teflon AF, Cytop, Halar, Tefzel, Hostaflon ET, Aflon COP, Neoflon, Teflon FEP, Hostaflon TFA, Algoflon, Neoflon AP, Kel-F, Aclon, Voltaflef, Diaflon, Teflon PFA, Fomblin, Krytox, Denum, Teflon PTFE, Fluon, Hostflon PTFE, polyflon, Kynar, Hylar, Solef, KF, Tedlar, Viton A, Flurel, Technoflon, Dai-el, THV, Fluorobase T, Viton B, Kelrez, Aflas, Kel-F 3700, Technoflon XL, Technoflon G, Viton G, Viton GLT.
Other halogenated polymers that may be employed include: halosilicones, halopolyurethanes, halopolyphosphazenes, halopolycarbonates, haloepoxy resins, halopolyamides, halopolyimides, halocyanurate resins, halopolystyrenics, halogenated polyolefins, halopolycyclohexane, halogenated ethylene-propylene-dienemonomer (EPDM) resins, halogenated acrylics, and halogenated polyacrylonitriles.
The host materials used in this study are a set of four fluoropolymers with different atomic percentages of fluorine. The polymers, described in some detail below, are a perfluorocyclobutyl (PFCB) aromatic polyether thermoplastic, one copolymer of PFCB, and poly(vinylidenedifluoride) (PVDF) and one copolymer of PVDF. These are compared to a limited extent with poly methylmethacrylate (PMMA).
Perfluorocyclobutyl (PFCB) polymers used were prepared from commercially available precursors as described elsewhere. Specifically, thermoplastic PFCB polymers used in this study were prepared from 4,4′-bis(trifluorovinyloxy)biphenyl or 4,4′-bis(trifluorovinyloxyphenyl)hexafluoro-isopropylidene, or for copolymers, a trifunctional comonomer tris(trifluorovinyloxyphenyl) ethane.
Perfluorocyclobutyl (PFCB) polymers are prepared from the free radical mediated thermal cyclopolymerization of trifunctional and bifunctional aryl trifluorovinyl ether monomers from which a variety of thermally stable (Tg˜350° C.), low dielectric constant thermoplastic and thermosetting materials can be obtained. As a unique class of partially fluorinated polymers, PFCB polyaryl ethers combine the processability and durability of engineering thermoplastics with the optical, electrical, thermal, and chemical resistant properties of traditional fluoroplastics. This makes them particularly interesting for nanocomposite work.
To create the initial nanocomposite matrix, trifunctional monomer, 1,1,1-tris-(4-trifluorovinyloxyphenyl)ethane was used. Since this monomer monomer has a melting point just above room temperature (40 C), MWNTs were easily mixed with the liquid monomer by ultra-sonication for 1 hour. After sonication, the monomer/MWNT solution was a grayish, translucent liquid with very little visible aggregation. The solution was then polymerized by thermal cyclo-polymerization. The resulting nanocomposite as can be seen in
The second major class of fluoropolymers used in this study, Polyvinylidene difluoride (PVDF), possesses a unique blend of properties that makes it amenable to many processing techniques and many end uses; particularly its piezoelectricity is widely utilized commercially.
PVDF is a crystalline polymer (mp. =171° C.). Since the poly(vinylidenedifluoride) for the work is commercially available, polymerization routes and synthesis chemistry will not be discussed here in detail. The copolymer of PVDF, Poly(vinylidenedifluoride-co-hexafluoropropylene) (HFP), is the other copolymer examined in this study and is generally prepared by emulsion polymerization under pressure using a persulfate-bisulphite initiation system for free radical polymerization. The PVDF itself is highly crystalline. When copolymerized with hexafluorpropylene (HFP), the degree of crystallinity is greatly reduced and its solubility in solvents is increased.
The PVDF and HFP were dissolved in N,N- dimethylacetamide (purchased from Aldrich Chemical) to give a 10% solution by weight. Occasional stirring was done to promote dissolution. To these polymer solutions weighed proportions of purified MWNTs were added and sonicated in a water bath for close to 3 hrs. The sonicated solutions look gray-black in color and are further sonicated in a probe type sonicator (Branson Sonifier) for approximately 30 mins. The high power ultrasonication enhances the extent of mixing, which results in the presence of very little visible aggregation.
The sonicated samples were drop cast on silicon wafers heated to 120° C. Resulting films are approximately 70-80 microns thick, with no visible aggregates. For thicker samples (˜100-120 microns), films were cast in a Teflon mold. The MWNT loading used varied for different property analysis ranging from 0.1-35 wt%.
The molecular weights of the polymers used for these studies were approximately 50,000 for the PFCB thermoplastic and pre-network resins; and around 500,000 for the PVDFs. As noted, the PVDF tends to be rather crystalline in morphology, whereas the PFCB/ PFCB-co and PVDF-co exhibit a glassy microstructure. Volume resistivity data was collected using a Keithley 8009 Resistivity Test Fixture and Keithley Electrometer (ASTM D257).
In some applications, a composition is made having carbon-based nanotubes or nanomaterials showing a thermal conductivity greater than 1.25 W/mK at a nanomaterial loading level of about 0.01 to about 10 weight %. In other applications, the composition may show a volume resistivity of less than about 1010 ohm cm at a nanomaterial loading level from about 0.01 to about 10 weight %. Furthermore, in other applications a composition may exhibit an optical transmission of greater than 80% at a nanomaterial loading level of about 0.01 to about 80 weight %. In yet other applications, the composition may show an optical transmission of greater than 50% at a nanomaterial loading level from about 0.01 to about 5 weight %.
To first examine the microstructure of the matrix nanocomposites, we imaged fracture surfaces of the materials with a field-emission SEM (Hitachi 4700S). Shown in
Agglomerate mitigation is also observed for the PVDF composites. Notice that while most of the nanocomposite for the 1% wt. loaded PVDF host appears extremely uniform (
As a demonstration of the overall clarity of the nanocomposites,
In
While electron and optical microscopy is one way of determining local dispersion characteristics, it is instructive to look at average dispersion properties over large areas. Optical scattering is a quick and easy way to understand the average particle size within the matrix. Though we will not present quantitative light scattering numbers here a comparison of the scattering for samples of the same thickness shows an interesting trend.
To understand these results in context, a comparison with optically transparent, nonfluorinated polymers is useful. Shown in
Generally, microscopy and optical scattering suggests that the fluorine content of the polymers is responsible for the dispersion characteristics. In
Recently there have been several works discussing fluorine doping of carbon nanotubes. This suggests strong interactions between nanotubes and fluorine and suggests this as the mitigating factor in the inter-tube van der Waals interactions. This, too, suggests that equally as reactive chloro-polymers might make equally as good host materials. As an initial investigation, Poly vinyl chloride was used as a host and blended with MWNTs in an analogous fashion to the composites above.
It has been demonstrated in these examples that a new class of fluorocarbon matrix composites may be employed based on carbon 15 nanotubes dispersed in fluoropolymer hosts. Clearly, other halo-polymers also could be used, with varying results depending upon the particular polymer selected, and the manufacturing and processing conditions. Different applications may use other types of halo-polymers, still within the scope of this invention.
Optical scatter and microscopy data suggests that dispersion can be directly controlled by adjusting the fluorine content of the polymer. Further, the role of the fluorine is mitigation of tube-tube interactions to allow for low-shear blending. These composites provide opportunities in the creation of new optically transparent, for example, and potentially electrically conductive films and the potential for new nonlinear optical materials.
In another application of the invention, the nanocomposite is employed as the sensing probe in atomic force and near field optical microscopes. The probe may employ a frontal face having a nanotube protruding therefrom as the sensing element. As an example, a carbon nanotube composite of the invention has the potential to dramatically improve spatial resolution of these scanning probe microscopes.
a shows a drawn PFCB fiber containing carbon nanotubes.
As provided below, the compositions of the invention exhibit adequate thermal and electrical conductivity for these applications while maintaining mechanical flexibility, toughness, and, potentially, optical clarity. This is realized through the unique level of dispersion for very low loadings (<0.1 to 5 weight %) of high conductivity nanotubes in a halopolymer host.
PFCB chemistry is generally well suited for carbon nanotube composite fabrication. Carbon nanotubes can be easily and uniformly dispersed in trifluorovinyl ether (TFVE) monomers by gentle sonication at ca. 70° C. Multi-walled and single walled nanotubes could be employed. Bulk polymerization of the mixtures results in optically clear nanocomposites at low loading levels. It is possible to fabricate nanocomposites containing isolated carbon nanotubes in fluoropolymers for both specialty coatings and nanoprobe applications. Very low levels of well-dispersed nanotubes may be used in coatings which require multifunctional properties.
In the practice of the invention, it is possible to provide a halogen-containing polymer with carbon nanotubes, and to form a combined polymer matrix of dispersed carbon nanotubes within the polymer matrix. There is no limit to the number of halogen-containing polymers that can be used in the practice of the invention. For example, polymers containing bromine, chlorine, iodine and fluorine are examples of halogens which can be incorporated into polymeric structures in the practice of the invention.
Nanocomposite matrix compositions may be developed using halogen-containing monomers or polymers or co-polymers as described above in connection with the Examples (or other halogen-containing monomers or polymers as disclosed in this specification) as combined with various clay materials. For example, it is possible to provide in the matrix set forth in the examples above to include a clay product, such as a hydrated aluminum silicate (as one example).
Naturally occurring clays may be used, including but not limited to kaolinite, bentonite, mica, talc, silica nanoparticles, montmorillonite, attapulgite, illite, bentonite, halloysite, fullers earth, kaolin, and polyorganosilicate graft polymers.
There are numerous applications of the compositions of this invention, and the scope of this invention is not limited to any particular composition. It is understood by one of ordinary skill in the art that the present discussion is a description of exemplary embodiments only, and is not intended as limiting the broader aspects of the present invention, which broader aspects are embodied in the exemplary constructions. The invention is shown by example in the appended claims.
This application claims priority to an earlier filed provisional application, Ser. No. 60/278,015, filed in the United States on Mar. 22, 2001.
Number | Date | Country | |
---|---|---|---|
60278015 | Mar 2001 | US |
Number | Date | Country | |
---|---|---|---|
Parent | 10103562 | Mar 2002 | US |
Child | 11649200 | Jan 2007 | US |