Patent Application
20240284514
The present disclosure is related to the field of telecommunication, and in particular, to a user equipment (UE), a network node, and methods for a feature based random access procedure.
With the development of the electronic and telecommunications technologies, mobile devices, such as a mobile phone, a smart phone, a laptop, a tablet, a vehicle mounted device, becomes an important part of our daily lives. To support a numerous number of mobile devices, a highly efficient Radio Access Network (RAN), such as a fifth generation (5G) New Radio (NR) RAN, will be required.
In order to be able to carry the data across the 5G NR RAN, data and information is organized into a number of data channels. By organizing the data into various channels, a 5G communications system is able to manage the data transfers in an orderly fashion and the system is able to understand what data is arriving and hence it is able to process the data in the required fashion. As there are many different types of data that need to be transferred-user data obviously needs to be transferred, but so does control information to manage the radio communications link, as well as data to provide synchronization, access, and the like. All of these functions are essential and require the transfer of data over the RAN.
In order to group the data to be sent over the 5G NR RAN, the data is organized in a very logical way. As there are many different functions for the data being sent over the radio communications link, they need to be clearly marked and have defined positions and formats. To ensure this happens, there are several different forms of data “channel” that are used. The higher level ones are “mapped” or contained within others until finally at the physical level, the channel contains data from higher level channels.
In this way there is a logical and manageable flow of data from the higher levels of the protocol stack down to the physical layer.
There are three main types of data channels that are used for a 5G RAN, and accordingly the hierarchy is given below.
The physical channels often have higher level channels mapped onto them for providing a specific service. Additionally, the physical channels carry payload data or details of specific data transmission characteristics like modulation, reference signal multiplexing, transmit power, RF resources, etc.
The 5G physical channels are used to transport information over the actual radio interface. They have the transport channels mapped into them, but they also include various physical layer data required for the maintenance and optimization of the radio communications link between a UE and a base station (BS).
There are three physical channels for each of the uplink and downlink: Physical Downlink Shared Channel (PDSCH), Physical Downlink Control Channel (PDCCH), and Physical Broadcast Channel (PBCH) for downlink, and Physical Random Access Channel (PRACH), Physical Uplink Shared Channel (PUSCH), and Physical Uplink Control Channel (PUCCH) for uplink.
According to a first aspect of the present disclosure, a method at a user equipment (UE) for performing a random access procedure with a network node is provided. The method comprises: receiving a configuration for physical random access channel (PRACH) transmission; determining a first PRACH resource, which is to be used for the PRACH transmission and indicates whether a feature is requested or not, at least partially based on the received configuration and one or more measurements at the UE; and transmitting, to the network node, the PRACH transmission by using the first PRACH resource.
In some embodiments, the first PRACH resource comprises at least one of:—a PRACH time/frequency resource; and—a PRACH preamble sequence. In some embodiments, the feature comprises at least one of:—Msg3 repetition;—MsgA repetition;—a network slice;—Non-small data transmission (Non-SDT);—a UE with reduced capability (RedCap UE);—a random access in non-terrestrial network; and—a specific service type or UE priority.
In some embodiments, the step of determining the first PRACH resource comprises: determining whether the feature is requested or not at least partially based on the received configuration and a first measurement at the UE; selecting one of multiple synchronous signal blocks (SSBs) broadcasted by the network node at least partially based on the received configuration and one or more second measurements at the UE; and determining the first PRACH resource at least partially based on the selected SSB and the determination of whether the feature is requested or not.
In some embodiments, the step of determining whether the feature is requested or not comprises: determining whether reference signal received power (RSRP) of a downlink pathloss reference, which is measured at the UE, is higher than or equal to a first threshold indicated by the received configuration or not; and determining that the feature is not requested in response to determining that the RSRP of the downlink pathloss reference is higher than or equal to the first threshold. In some embodiments, the step of determining whether the feature is requested or not comprises: determining whether RSRP of a downlink pathloss reference, which is measured at the UE, is higher than or equal to a first threshold indicated by the received configuration or not; and determining that the feature is requested in response to determining that the RSRP of the downlink pathloss reference is lower than the first threshold.
In some embodiments, the selected SSB is one of:—a first SSB that is first determined to have a measured RSRP higher than a second threshold indicated by the received configuration;—a second SSB that is first determined to have a measured RSRP higher than a third threshold indicated by the received configuration;—a third SSB having the highest measured RSRP that is higher than the second threshold;—a fourth SSB having the highest measured RSRP that is higher than the third threshold;—a fifth SSB having the highest measured RSRP that is lower than or equal to the second threshold;—a sixth SSB having the highest measured RSRP that is lower than or equal to the second threshold but higher than the third threshold;—a seventh SSB having the highest measured RSRP that is lower than or equal to the third threshold; and—an eighth SSB that is randomly selected and has a measured RSRP lower than or equal to the second threshold and/or the third threshold. In some embodiments, the second threshold is indicated by an information element (IE) “rsrp-ThresholdSSB” in the configuration, and the third threshold is indicated by a second IE in the configuration or jointly indicated by the IE “rsrp-ThresholdSSB” and a third IE in the configuration that indicates an offset.
In some embodiments, the step of determining the first PRACH resource at least partially based on the selected SSB and the determination of whether the feature is requested or not comprises at least one of: determining a PRACH resource, which is associated with the selected SSB and indicates the feature is not requested, as the first PRACH resource in response to determining that the feature is not requested and in response to the selected SSB being the first or third SSB; determining a PRACH resource, which is associated with the selected SSB and indicates the feature is not requested, as the first PRACH resource in response to determining that the feature is not requested and in response to the selected SSB being the fifth or eighth SSB; determining a PRACH resource, which is associated with the selected SSB and indicates the feature is requested, as the first PRACH resource in response to determining that the feature is requested and in response to the selected SSB being the first or third SSB; and determining a PRACH resource, which is associated with the selected SSB and indicates the feature is requested, as the first PRACH resource in response to determining that the feature is requested and in response to the selected SSB being the fifth or eighth SSB.
In some embodiments, the step of determining the first PRACH resource at least partially based on the selected SSB and the determination of whether the feature is requested or not comprises at least one of: determining a PRACH resource, which is associated with the selected SSB and indicates the feature is not requested, as the first PRACH resource in response to determining that the feature is not requested and in response to the selected SSB being the first or third SSB; determining a PRACH resource, which is associated with the selected SSB and indicates the feature is not requested, as the first PRACH resource in response to determining that the feature is not requested and in response to the selected SSB being the fifth or eighth SSB; determining a PRACH resource, which is associated with the selected SSB and indicates the feature is requested, as the first PRACH resource in response to determining that the feature is requested and in response to the selected SSB being the second or fourth SSB; and determining a PRACH resource, which is associated with the selected SSB and indicates the feature is requested, as the first PRACH resource in response to determining that the feature is requested and in response to the selected SSB being the seventh or eighth SSB.
In some embodiments, the step of determining the first PRACH resource at least partially based on the selected SSB and the determination of whether the feature is requested or not comprises at least one of: determining a PRACH resource, which is associated with the selected SSB and indicates the feature is not requested, as the first PRACH resource in response to determining that the feature is not requested and in response to the selected SSB being the first or third SSB; determining a PRACH resource, which is associated with the selected SSB and indicates the feature is requested, as the first PRACH resource in response to determining that the feature is not requested and in response to the selected SSB being the sixth SSB; determining a PRACH resource, which is associated with the selected SSB and indicates the feature is requested, as the first PRACH resource in response to determining that the feature is requested and in response to the selected SSB being the second or fourth SSB; and determining a PRACH resource, which is associated with the selected SSB and indicates the feature is requested, as the first PRACH resource in response to determining that the feature is requested and in response to the selected SSB being the seventh or eighth SSB.
In some embodiments, after the step of determining whether the feature is requested or not, the method further comprises at least one of:—setting the variable “RA_TYPE” at the UE to indicate whether the feature is requested or not, wherein the variable “RA_TYPE” has a value indicating 2-stepRA, 4-stepRA, or 4-stepRA-rep based on the determination;—setting a variable different from the variable “RA_TYPE” at the UE to indicate whether its access type is a random access with the feature or not based on the determination; and—setting a variable different from the variable “RA_TYPE” at the UE to indicate whether the UE shall signal, to the network node, that the feature is requested or not based on the determination.
In some embodiments, the step of determining the first PRACH resource comprises: selecting one of multiple SSBs broadcasted by the network node at least partially based on the received configuration and one or more second measurements at the UE; determining whether the feature is requested or not at least partially based on at least one of:—the received configuration and a first measurement at the UE;—the received configuration and the one or more second measurements at the UE; and—the selected SSB; and determining the first PRACH resource at least partially based on the selected SSB and the determination of whether the feature is requested or not.
In some embodiments, the selected SSB is one of:—a first SSB that is first determined to have a measured RSRP higher than a second threshold indicated by the received configuration;—a second SSB that is first determined to have a measured RSRP higher than the second threshold or a third threshold indicated by the received configuration;—a third SSB that is first determined to have a measured RSRP higher than a fourth threshold indicated by the received configuration;—a fourth SSB having the highest measured RSRP that is higher than the second threshold;—a fifth SSB having the highest measured RSRP that is higher than the second or third threshold;—a sixth SSB having the highest measured RSRP that is higher than the fourth threshold;—a seventh SSB having the highest measured RSRP that is lower than or equal to the second threshold;—an eighth SSB having the highest measured RSRP that is lower than or equal to both of the second threshold and the third threshold;—a ninth SSB having the highest measured RSRP that is lower than or equal to the fourth threshold; and—a tenth SSB that is randomly selected and has a measured RSRP lower than or equal to the second threshold and/or the third threshold and/or the fourth threshold. In some embodiments, the second threshold is indicated by an information element (IE) “rsrp-ThresholdSSB” in the configuration, wherein the third threshold is indicated by a second IE in the configuration or jointly indicated by the IE “rsrp-ThresholdSSB” and a third IE in the configuration that indicates an offset; and wherein the fourth threshold is indicated by a fourth IE in the configuration.
In some embodiments, the step of determining whether the feature is requested or not comprises: determining whether RSRP of a downlink pathloss reference, which is measured at the UE, is higher than or equal to a first threshold indicated by the received configuration or not; and determining that the feature is not requested in response to determining that the RSRP of the downlink pathloss reference is higher than or equal to the first threshold.
In some embodiments, the step of determining whether the feature is requested or not comprises: determining whether RSRP of a downlink pathloss reference, which is measured at the UE, is higher than or equal to a first threshold indicated by the received configuration or not; and determining that the feature is requested in response to determining that the RSRP of the downlink pathloss reference is lower than the first threshold.
In some embodiments, the step of determining whether the feature is requested or not comprises: determining whether the RSRP of the selected SSB is higher than the third threshold or not; and determining that the feature is requested in response to determining that the RSRP of the selected SSB is lower than or equal to the third threshold.
In some embodiments, the step of determining whether the feature is requested or not comprises: determining whether the RSRP of the selected SSB is higher than the third threshold or not; and determining that the feature is not requested in response to determining that the RSRP of the selected SSB is higher than the third threshold.
In some embodiments, the step of determining whether the feature is requested or not comprises: determining that the feature is requested in response to determining that the selected SSB is the eighth SSB.
In some embodiments, the step of determining whether the feature is requested or not comprises: determining that the feature is not requested in response to determining that the selected SSB is the first or fourth SSB.
In some embodiments, the step of determining whether the feature is requested or not comprises: determining whether the RSRP of the selected SSB is higher than the third threshold or not; and determining that the feature is requested in response to determining that the RSRP of the selected SSB is higher than the third threshold.
In some embodiments, the step of determining whether the feature is requested or not comprises: determining whether the RSRP of the selected SSB is higher than or equal to the fourth threshold plus a repetition offset indicated by the received configuration or not; and determining that the feature is not requested in response to determining that the RSRP of the selected SSB is higher than or equal to the fourth threshold plus the repetition offset.
In some embodiments, the step of determining whether the feature is requested or not comprises: determining whether the RSRP of the selected SSB is higher than or equal to the fourth threshold plus a repetition offset indicated by the received configuration or not; and determining that the feature is requested in response to determining that the RSRP of the selected SSB is lower than the fourth threshold plus the repetition offset.
In some embodiments, the step of determining whether the feature is requested or not comprises: determining that the feature is requested in response to determining that the RSRP of the selected SSB is lower than the fourth threshold.
In some embodiments, the step of determining the first PRACH resource at least partially based on the selected SSB and the determination of whether the feature is requested or not comprises at least one of: determining a PRACH resource, which is associated with the selected SSB and indicates the feature is not requested, as the first PRACH resource in response to determining that the feature is not requested and in response to the selected SSB being the first or fourth SSB; determining a PRACH resource, which is associated with the selected SSB and indicates the feature is requested, as the first PRACH resource in response to determining that the feature is requested and in response to the selected SSB being the first or fourth SSB; determining a PRACH resource, which is associated with the selected SSB and indicates the feature is not requested, as the first PRACH resource in response to determining that the feature is not requested and in response to the selected SSB being the seventh or tenth SSB; and determining a PRACH resource, which is associated with the selected SSB and indicates the feature is requested, as the first PRACH resource in response to determining that the feature is requested and in response to the selected SSB being the seventh or tenth SSB.
In some embodiments, the step of determining the first PRACH resource at least partially based on the selected SSB and the determination of whether the feature is requested or not comprises at least one of: determining a PRACH resource, which is associated with the selected SSB and indicates the feature is not requested, as the first PRACH resource in response to determining that the feature is not requested and in response to the selected SSB being the second or fifth SSB; determining a PRACH resource, which is associated with the selected SSB and indicates the feature is requested, as the first PRACH resource in response to determining that the feature is requested and in response to the selected SSB being the second or fifth SSB; determining a PRACH resource, which is associated with the selected SSB and indicates the feature is requested, as the first PRACH resource in response to determining that the feature is requested and in response to the selected SSB being the eighth or tenth SSB.
In some embodiments, the step of determining the first PRACH resource at least partially based on the selected SSB and the determination of whether the feature is requested or not comprises at least one of: determining a PRACH resource, which is associated with the selected SSB and indicates the feature is not requested, as the first PRACH resource in response to determining that the feature is not requested and in response to the selected SSB being the first or fourth SSB; determining a PRACH resource, which is associated with the selected SSB and indicates the feature is requested, as the first PRACH resource in response to determining that the feature is requested and in response to the selected SSB being the seventh or tenth SSB.
In some embodiments, the step of determining the first PRACH resource at least partially based on the selected SSB and the determination of whether the feature is requested or not comprises at least one of: determining a PRACH resource, which is associated with the selected SSB and indicates the feature is not requested, as the first PRACH resource in response to determining that the feature is not requested and in response to the selected SSB being the third or sixth SSB; determining a PRACH resource, which is associated with the selected SSB and indicates the feature is requested, as the first PRACH resource in response to determining that the feature is requested and in response to the selected SSB being the third or sixth SSB; determining a PRACH resource, which is associated with the selected SSB and indicates the feature is requested, as the first PRACH resource in response to determining that the feature is requested and in response to the selected SSB being the ninth or tenth SSB.
In some embodiments, the step of determining the first PRACH resource at least partially based on the selected SSB and the determination of whether the feature is requested or not comprises: determining a PRACH resource, which indicates the feature is requested, as the first PRACH resource in response to determining that the UE is in a connected state with the network node and at least one pre-defined condition is met.
In some embodiments, the at least one pre-defined condition comprises at least one of:—the PRACH transmission is used for beam failure recovery (BFR);—the PRACH transmission is used for uplink synchronization;—the PRACH transmission is used for Radio Resource Control (RRC) connection re-establishment; and—the PRACH transmission is used for Scheduling Request (SR) failure.
In some embodiments, before the step of determining the first PRACH resource, the method further comprises: receiving, from the network node, an indicator for each of one or more of the at least one pre-defined condition.
In some embodiments, the step of determining the first PRACH resource at least partially based on the selected SSB and the determination of whether the feature is requested or not comprises: determining a PRACH resource, which indicates the feature is requested, as the first PRACH resource in response to determining that the timing advance (TA) for the UE is changed by a value greater than a TA threshold.
In some embodiments, the step of determining the first PRACH resource at least partially based on the selected SSB and the determination of whether the feature is requested or not comprises: determining a PRACH resource, which indicates the feature is requested, as the first PRACH resource in response to determining that a distance between the UE and the network node is longer than a distance threshold.
In some embodiments, when the feature is not MsgA repetition, the method further comprises: receiving, from the network node, a random access response (RAR) comprising an indicator indicating whether the feature is to be used or not; and transmitting, to the network node, a Msg3 with or without the feature depending on the received indicator.
According to a second aspect of the present disclosure, a user equipment (UE) is provided. The UE comprises: a processor; a memory storing instructions which, when executed by the processor, cause the processor to perform the method of any of the first aspect.
According to a third aspect of the present disclosure, a method at a network node for performing a random access procedure with a user equipment (UE) is provided. The method comprises: broadcasting or transmitting, to the UE, a configuration for physical random access channel (PRACH) transmission; receiving the PRACH transmission by using a first PRACH resource, the first PRACH resource itself indicating whether a feature is requested by the UE or not; and transmitting, to the UE, a random access response (RAR) at least partially based on whether the feature is requested by the UE or not.
In some embodiments, the first PRACH resource comprises at least one of:—a PRACH time/frequency resource; and—a PRACH preamble sequence. In some embodiments, the feature comprises at least one of:—Msg3 repetition;—MsgA repetition;—a network slice;—Non-small data transmission (Non-SDT);—a UE with reduced capability (RedCap UE);—a random access in non-terrestrial network; and—a specific service type or UE priority.
In some embodiments, the configuration comprises at least one of:—a first threshold for determining whether the feature can be requested or not;—a second threshold for both a non-Msg3-repetition-capable UE and a Msg3-repetition-capable UE to determine whether a SSB can be selected or not;—a third threshold for determining, alone or together with the second threshold, whether a SSB can be selected or not when the feature is to be requested; and—a fourth threshold for a Msg3-repetition-capable UE only to determine whether a SSB can be selected or not.
In some embodiments, the method further comprises: for each of at least one of following pre-defined conditions, broadcasting or transmitting, to the UE, an indicator to indicate that the feature can be always requested if the corresponding condition is met:—the PRACH transmission is used for beam failure recovery (BFR);—the PRACH transmission is used for uplink synchronization;—the PRACH transmission is used for Radio Resource Control (RRC) connection re-establishment; and—the PRACH transmission is used for Scheduling Request (SR) failure.
In some embodiments, when the feature is not MsgA repetition, the method further comprises: receiving, from the UE, a Msg3 with the feature enabled or disabled depending on the RAR.
According to a fourth aspect of the present disclosure, a network node is provided. The network node comprises: a processor; a memory storing instructions which, when executed by the processor, cause the processor to perform the method of any of the third aspect.
According to a fifth aspect of the present disclosure, a computer program comprising instructions is provided. The instructions, when executed by at least one processor, cause the at least one processor to carry out the method of any of the first or third aspect.
According to a sixth aspect of the present disclosure, a carrier containing the computer program of the fifth aspect is provided. The carrier is one of an electronic signal, optical signal, radio signal, or computer readable storage medium.
According to a seventh aspect of the present disclosure, a telecommunications system is provided. The telecommunications system comprises one or more UEs of the second aspect; and at least one network node of the fourth aspect.
Hereinafter, the present disclosure is described with reference to embodiments shown in the attached drawings. However, it is to be understood that those descriptions are just provided for illustrative purpose, rather than limiting the present disclosure. Further, in the following, descriptions of known structures and techniques are omitted so as not to unnecessarily obscure the concept of the present disclosure.
Those skilled in the art will appreciate that the term “exemplary” is used herein to mean “illustrative,” or “serving as an example,” and is not intended to imply that a particular embodiment is preferred over another or that a particular feature is essential. Likewise, the terms “first”, “second”, “third”, “fourth,” and similar terms, are used simply to distinguish one particular instance of an item or feature from another, and do not indicate a particular order or arrangement, unless the context clearly indicates otherwise. Further, the term “step,” as used herein, is meant to be synonymous with “operation” or “action.” Any description herein of a sequence of steps does not imply that these operations must be carried out in a particular order, or even that these operations are carried out in any order at all, unless the context or the details of the described operation clearly indicates otherwise.
Conditional language used herein, such as “can,” “might,” “may,” “e.g.,” and the like, unless specifically stated otherwise, or otherwise understood within the context as used, is generally intended to convey that certain embodiments include, while other embodiments do not include, certain features, elements and/or states. Thus, such conditional language is not generally intended to imply that features, elements and/or states are in any way required for one or more embodiments or that one or more embodiments necessarily include logic for deciding, with or without author input or prompting, whether these features, elements and/or states are included or are to be performed in any particular embodiment. Also, the term “or” is used in its inclusive sense (and not in its exclusive sense) so that when used, for example, to connect a list of elements, the term “or” means one, some, or all of the elements in the list. Further, the term “each,” as used herein, in addition to having its ordinary meaning, can mean any subset of a set of elements to which the term “each” is applied.
The term “based on” is to be read as “based at least in part on.” The term “one embodiment” and “an embodiment” are to be read as “at least one embodiment.” The term “another embodiment” is to be read as “at least one other embodiment.” Other definitions, explicit and implicit, may be included below. In addition, language such as the phrase “at least one of X, Y and Z,” unless specifically stated otherwise, is to be understood with the context as used in general to convey that an item, term, etc. may be either X, Y, or Z, or a combination thereof.
The terminology used herein is for the purpose of describing particular embodiments only and is not intended to be limitation of example embodiments. As used herein, the singular forms “a”, “an”, and “the” are intended to include the plural forms as well, unless the context clearly indicates otherwise. It will be further understood that the terms “comprises”, “comprising”, “has”, “having”, “includes” and/or “including”, when used herein, specify the presence of stated features, elements, and/or components etc., but do not preclude the presence or addition of one or more other features, elements, components and/or combinations thereof. It will be also understood that the terms “connect(s),” “connecting”, “connected”, etc. when used herein, just mean that there is an electrical or communicative connection between two elements and they can be connected either directly or indirectly, unless explicitly stated to the contrary.
Of course, the present disclosure may be carried out in other specific ways than those set forth herein without departing from the scope and essential characteristics of the disclosure. One or more of the specific processes discussed below may be carried out in any electronic device comprising one or more appropriately configured processing circuits, which may in some embodiments be embodied in one or more application-specific integrated circuits (ASICs). In some embodiments, these processing circuits may comprise one or more microprocessors, microcontrollers, and/or digital signal processors programmed with appropriate software and/or firmware to carry out one or more of the operations described above, or variants thereof. In some embodiments, these processing circuits may comprise customized hardware to carry out one or more of the functions described above. The present embodiments are, therefore, to be considered in all respects as illustrative and not restrictive.
Although multiple embodiments of the present disclosure will be illustrated in the accompanying Drawings and described in the following Detailed Description, it should be understood that the disclosure is not limited to the disclosed embodiments, but instead is also capable of numerous rearrangements, modifications, and substitutions without departing from the present disclosure that as will be set forth and defined within the claims.
Further, please note that although the following description of some embodiments of the present disclosure is given in the context of 5G NR, the present disclosure is not limited thereto. In fact, as long as a random access procedure is involved, the inventive concept of the present disclosure may be applicable to any appropriate communication architecture, for example, to Global System for Mobile Communications (GSM)/General Packet Radio Service (GPRS), Enhanced Data Rates for GSM Evolution (EDGE), Code Division Multiple Access (CDMA), Wideband CDMA (WCDMA), Time Division-Synchronous CDMA (TD-SCDMA), CDMA2000, Worldwide Interoperability for Microwave Access (WiMAX), Wireless Fidelity (Wi-Fi), 4th Generation Long Term Evolution (LTE), LTE-Advance (LTE-A), or 5th Generation New Radio (5G NR), etc. Therefore, one skilled in the arts could readily understand that the terms used herein may also refer to their equivalents in any other infrastructure. For example, the term “User Equipment” or “UE” used herein may refer to a terminal device, a mobile device, a mobile terminal, a mobile station, a user device, a user terminal, a wireless device, a wireless terminal, or any other equivalents. For another example, the term “gNB” used herein may refer to a network node, a base station, a base transceiver station, an access point, a hot spot, a NodeB, an Evolved NodeB, a network element, or any other equivalents. Further, please note that the term “field” used herein may refer to a parameter, a coefficient, an attribute, a property, a setting, a configuration, a profile, an identifier, an indicator, one or more bits/octets, an information element, or any data by which information of interest may be indicated directly or indirectly. Further, please note that the term “aspect” used herein may refer to a field, a parameter, a coefficient, an attribute, a property, a setting, a configuration, a profile, an identifier, an indicator, one or more bits/octets, an information element, or any data of something without considering its specific value. Therefore, a first aspect having a first value may be same as a second aspect having a second value while the first value is different from the second value. For example, as will be discussed below, a first aspect “whether transform precoding is enabled or not” of a CG/DG-based PUSCH transmission may be same as a second aspect “whether transform precoding is enabled or not” of a PUSCH transmission in a Type-2 RA procedure while the first aspect may have a value of “enabled” but the second aspect may have a value of “disabled”.
Further, following 3GPP documents are incorporated herein by reference in their entireties:
When a UE wants to access to a 5G NR network, it has to synchronize in downlink as well as in uplink. Downlink synchronization may be obtained after successfully decoding Synchronous Signal and PBCH block (SSB). In order to establish uplink synchronization and an RRC connection, the UE has to perform a random access procedure.
Further, RA procedures may also be classified into Contention Based Random Access (CBRA) or Non Contention or Contention Free Random Access (CFRA) depending on how its preamble is selected. In the contention based RA procedure, a UE may select a preamble randomly from a pool of preambles shared with other UEs. This means that the UE has a potential risks of selecting a same preamble as another UE and subsequently may experience conflict or contention. The gNB may use a contention resolution mechanism to handle this type of access requests. In this procedure, the result is random and not all RA succeeds.
Referring to the top flow chart of
At step 105, the UE 110 may receive a Master Information Block (MIB) from the gNB 120 by detecting an SSB which may comprise a Primary Synchronous Signal (PSS), a Secondary Synchronous Signal (SSS), and a PBCH carrying the MIB. Upon successful reception and decoding of the MIB, the UE 110 may determine time/frequency positions for monitoring Remaining Minimum System Information (RMSI) or System Information Block 1 (SIB1) broadcasted by the gNB 120, for example, by a pdcch-ConfigSIB1 information element (IE) comprised in the MIB.
At step 115, the UE 110 may receive the RMSI and Other System Information (OSI) from the gNB 120. For example, the UE 110 may receive and decode the RMSI (SIB1) based on the information determined at the step 105 to determine time/frequency positions for monitoring OSI broadcasted by the gNB 120, for example, by a searchSpaceOtherSystemInformation IE comprised in the SIB1. Further, the UE 110 may also obtain any parameters necessary for the 4-step RA procedure. For example, the UE 110 may determine a set of preambles by a RACH-ConfigCommon IE which can be used later during the 4-step RA procedure.
At step 125, the UE 110 may transmit a preamble which is selected from the set of preambles determined at the step 115 to the gNB 120 in Msg1. The selection of the preamble may be performed in a manner described with reference to
At step 135, upon reception of Msg1, the gNB 120 may select or otherwise determine a Temporary Cell-Radio Network Temporary Identifier (TC-RNTI) and uplink and downlink scheduling resources for the UE 110. Then, the gNB 120 may transmit an RA response (RAR or Msg2) over PDCCH/PDSCH. The response may contain the RA-preamble identifier, timing alignment information, initial uplink grant, and the TC-RNTI. One PDSCH may carry RA responses to multiple UEs. On the other hand, after transmitting the preamble, the UE 110 may monitor the PDCCH and wait for the RAR within an RA response window:
Further, the UE 110 may use the timing alignment information comprised in the RAR to adjust the timing of any subsequent PUSCH transmission, allowing PUSCH to be received at the gNB 120 with a timing accuracy within the cyclic prefix (CP). Without this timing advance functionality, a very large CP would be needed in order to be able to demodulate and detect PUSCH, unless the system is applied in a cell with very small distance between the UE 110 and the gNB 120. Since NR will also support larger cells, there is a need for providing a timing advance to the UE 110.
At step 145, the UE 110 may transmit uplink scheduling information (Msg3) over the PUSCH. The signaling messages and information transmitted by the UE 110 may vary across different RA scenarios and some examples are listed below:
At step 155, after transmitting the Msg3, a contention resolution timer may be started at the UE 110. The gNB 120 may assist the UE 110 in contention resolution using the C-RNTI on the PDCCH or using the UE Contention Resolution Identity IE on the PDSCH.
The UE 110 may keep monitoring the PDCCH before the timer expires and considers the contention resolution successful and stops the timer if either of the following conditions is met:
If the contention resolution timer expires, the UE 110 may consider the contention resolution failed. Then, the UE 110 may perform the RA procedure again if the number of RA attempts has not reached the upper limit. If the number of RA attempts has reached its upper limit, the RA procedure fails.
In non-contention based Random Access, the preamble may be pre-allocated by the gNB 120 and such preambles may be known as dedicated random access preamble. The dedicated preamble may be provided to the UE 110 either via RRC signalling (e.g., allocated preamble(s) can be specified within an RRC message) or PHY Layer signalling (e.g., DCI on the PDCCH). Therefore, there is no preamble conflict. When dedicated resources are insufficient, the gNB 120 may instruct UEs to initiate contention-based RA.
The gNB 120 may allocate an RA preamble to the UE 110 and sent it using an RRC message or DCI signaling. Some scenarios are listed below:
Referring to the bottom flow chart of
Similar to the step 105, at step 165, the UE 110 may receive a Master Information Block (MIB) from the gNB 120 by detecting an SSB. Upon successful reception and decoding of the MIB, the UE 110 may determine time/frequency positions for monitoring Remaining Minimum System Information (RMSI) or System Information Block 1 (SIB1) broadcasted by the gNB 120.
Similar to the step 115, at step 175, the UE 110 may receive the RMSI and Other System Information (OSI) from the gNB 120. For example, the UE 110 may receive and decode the RMSI (SIB1) based on the information determined at the step 105 to determine time/frequency positions for monitoring OSI broadcasted by the gNB 120, for example, by a searchSpaceOtherSystemInformation IE comprised in the SIB1. Further, the UE 110 may also obtain any parameters necessary for the 2-step RA procedure. For example, the UE 110 may determine available time/frequency occasions for PRACH by a msgA-ConfigCommon IE comprised in the SIB1, which can be used later during the 2-step RA procedure.
Similar to the step 125, at the step 185, the UE 110 may transmit to the gNB 120 an RA preamble (MsgA), which is pre-allocated by the gNB 120, together with higher layer data such as an RRC connection request possibly with some small additional payload on PUSCH. In such a case, no confliction with other UEs will happen.
Similar to the step 135, the gNB 120 may transmit an RA response (MsgB) to the UE 110. Since no conflict with other UEs will occur, and the steps for contention resolving (e.g., Msg3 and Msg4 in the 4-step RA procedure) may be omitted.
In the handover scenario, the RA response may contain the timing alignment information and initial uplink grant. In the DL data arrival scenario, when downlink data arrives at the gNB 120, the RA response may contain the timing alignment information and RA preamble identifier (RAPID). In the NSA networking scenario, when NR cells are added in NSA, the RA response may contain the timing alignment information and RA preamble identifier (RAPID).
Please note that although
In 3GPP RAN #90e, the following objectives have been approved for NR coverage enhancement work item in NR Rel-17 for PUSCH:
As already described with reference to
In both 4-step RACH and 2-step RACH, PRACH resources may be selected based on the SSB selection and a SSB to RACH occasion (RO)/preamble mapping. Detailed procedures of PRACH resource selection may be found in section 5.1.2 and 5.1.2a of 3GPP TS 38.321 for 4-step RACH and 2-step RACH, respectively.
The mapping between SSB and PRACH may be one-to-one, one-to-many, and many-to-one in a predetermined order specified in standard. For example,
When a UE (e.g., the UE 110) determines a good enough SSB beam with Synchronous Signal-Reference Signal Received Power (SS-RSRP) above an RSRP threshold (e.g., rsrp-ThresholdSSB), a preamble in the set of one or more preambles in a PRACH occasion mapped to this SSB may be selected for the random access, then when the gNB (e.g., the gNB 120) detects the preamble, the determined SSB beam for this UE may be known indirectly to some extent so that determined beam can be used for transmitting signals to or receiving signals from this UE.
Please note that the present disclosure is not limited thereto. In some other embodiments, a different number of SSBs and/or a different number of PRACH occasions and/or a different mapping may be provided. Further, although it looks like, in
During the discussions in the meetings from 3GPP RAN1 #104-e, the first meeting of the NR coverage enhancement work item in Rel-17, to 3GPP RAN1 #105-e, following agreements have been made regarding the Msg3 repetition criteria:
Agreement: A UE requests Msg3 PUSCH repetition at least when the RSRP of the downlink pathloss reference is lower than an RSRP threshold.
As discussed above, it has been agreed that whether a UE shall signal that msg3 repetitions are needed (either by means of random access opportunity, RACH occasion, selection, or random access preamble selection) is decided based at least on an RSRP threshold. This is straightforward as an RSRP threshold is also utilized when selecting between 4-step random access and 2-step random access where 2-step RACH is only selected if the UE is in good coverage, which implies higher RSRP with respect to the serving cell, the UE shall utilize 2-step random access. What is not straightforward is the fact that there are several thresholds used for random access selection and the interaction between these thresholds creates problems if the conditions are not designed carefully.
It is for instance not clear whether the PRACH resource selection for msg3 repetition condition should be evaluated before or after the SSB selection. Since the SSB selection is based on RSRP with a specific SSB and the PRACH resource selection for msg3 repetition condition is based on RSRP of downlink pathloss reference, this could easily create combinations that can cause erroneous selection of repetitions and SSB. Furthermore, the selection design should be such that legacy devices (devices that cannot do msg3 repetitions) that might co-exist and read the same random access configuration (except the msg3 repetitions PRACH resource configuration) should be able to access without any issues.
Further, for the connected mode, random access is used for several purposes, such as for Beam Failure Recovery (BFR), re-gaining UL synch etc. In this case there can be reasons for signaling that msg3 repetitions without checking the rsrp-Threshold.
Therefore, some embodiments of the present disclosure provide methods on how to design the random access and SSB selection conditions for selecting correct resources for requesting msg3 repetition. With these embodiments, effective selection of SSB and PRACH resources in a network when Msg3 repetition is enabled may be achieved, so that coverage limited UEs can be improved with good coverage via quick Msg3 repetition while legacy UE is not affected.
Some embodiments of the present disclosure deal with selection of SSB and preamble resources for msg3 repetitions. Please note that following parameters and nomenclature may be used in some embodiments of the present disclosure:
Further, in some embodiments of the present disclosure, PRACH resource may be the PRACH time frequency resources and/or PRACH preamble sequences. Further, in some embodiments of the present disclosure, the “Msg3 repetition PRACH resource selection” may refer to the PRACH resource selection based on the conditions on whether a PRACH resource used for requesting/indicating that Msg3 repetition should be selected. Further, in some embodiments of the present disclosure, “Msg3 repetition PRACH resource” may be the PRACH resource separately configured for UE to request or indicate Msg3 repetition.
Further, in some embodiments of the present disclosure, the “SSB selection” may refer to the SSB selection for further PRACH resource selection as PRACH resources are always associated to SSBs.
In some embodiments of the present disclosure, the SSB selection and whether Msg3 repetition is requested or not can be applied in one or more of the following ways:
Option 1 means that SSB is selected first in the same way as legacy procedure for UEs not supporting msg3 repetition, and when the SSB is selected, the SSB will have corresponding 2 sets of PRACH resources, one is legacy PRACH resource not for requesting msg3 repetition, another set is separate PRACH resource for requesting msg3 repetition. Which set of PRACH resource is selected will be up to msg3 repetition PRACH resource selection conditions. This method may have less impact on 3GPP specification since msg3 repetition conditions are checked after SSB selection.
Option 2 means that whether msg3 repetition is requested or not is determined first. E.g. when a set of PRACH resources for requesting msg3 repetition is selected based on RSRP criteria, the SSB selection will be applied after that in a similar way as the SSB selection procedure for determining a PRACH resource in NR Rel-16. With this method, whether the msg3 repetition is requested or not does not depend on the SSB selection.
Please note that although a specific manner for selecting SSB (i.e., selecting an SSB that is first identified or determined to meet the condition) is shown in the figures and described below, the present disclosure is not limited thereto. In some other embodiments, an SSB with the best SS-RSRP may be selected. In some yet other embodiments, an SSB may be selected randomly from all SSBs that meet the condition or simply all the SSBs. In some further embodiments, an SSB may be selected in any appropriate manner, e.g., a combination of the manners described above.
Next, some embodiments where SSB selection is performed after whether msg3 repetition is requested or not is determined will be described with reference to
As shown in
This embodiment may enable less specification change but may not enable much flexibility.
As shown in
As variation on the above embodiments, if no suitable SSB is found when the UE has previously determined that it shall not select PRACH resource for msg3 repetition indication, the UE 110 can be configured to switch to select PRACH resource for msg3 repetition indication and select the SSB anyways. This can be seen in
Further, the above embodiments may for instance be done by introducing a variable indicating that the random access type is of type random access with msg3 repetitions. Alternatively, the above embodiments may for instance be done by introducing a variable that sets that the UE shall signal msg3 repetitions, named repetitionType where the possible values can be noRepetitions and repetitions. Alternatively, the legacy variable RA_TYPE that indicates whether 4-step or 2-step random access is performed may be extended to have the values RA_TYPE={2-stepRA, 4-stepRA, 4-stepRA-rep}.
Next, some embodiments where SSB selection is performed before whether msg3 repetition is requested or not is determined will be described with reference to
As shown in
In some embodiments, the SSB selection may be done by combining the SSB selection with a repetition condition for the UE 110 to determine whether a UE shall select an SSB. The condition for selecting an SSB can be based on 1) legacy UE_SSB_RSRP>rsrp-ThresholdSSB (RSRP_UE is higher than the SSB threshold) AND 2) repetition condition. An example decision tree for this embodiment may be seen in
In some embodiments, the repetition condition may be expressed as an offset from the rsrp-ThresholdSSB. This means that in addition to the rsrp-ThresholdSSB, an offset from the rsrp-ThresholdSSB may be introduced. This means that the repetition condition for selecting an SSB may be UE_SSB_RSRP>rsrp-ThresholdSSB—repetitionOffset.
In some embodiments, the repetition condition may be based on the pathloss with the serving cell.
In some embodiments, the UE 110 may first check whether any SSB can be selected without a repetition condition and if no SSB can be selected, it may then check the repetition condition, where the repetition condition can be as above. The decision tree for this may be seen in
This can for instance be implemented by the following text proposal (TP) (similar to
5.1.2 Random Access Resource selection
5.1.2 Random Access Resource selection
Further, in some embodiments, a separate threshold to select an SSB may be introduced for msg3-repetition-capable UEs requesting msg3 repetition via separate PRACH resource.
This means that the repetition-capable UE may first check a separate SSB-selection threshold, similar to rsrp-ThresholdSSB to select an SSB, and will then further check whether repetitions shall be performed or not once the SSB has been selected.
The decision tree can be seen in
This can be implemented by the following TP:
In some embodiments, there can be in certain conditions (e.g. for connected mode) where the UE shall always select the resources for msg3 repetitions (when msg3 repetition is supported by the UE).
In some embodiments, the certain conditions may be one or more of the following:
The above allows a UE that might for instance be in momentary bad coverage to perform msg3 repetitions so that it can stay in connected mode without having to perform any of the time consuming and/or power consuming procedures that might follow if the procedure fails. There can for instance be a configuration for each procedure whether the UE shall ignore the RSRP threshold and always select the resources for msg3 repetitions.
In some embodiments, on top of the RSRP threshold condition for msg3 repetition PRACH resource selection, one or more of the following conditions can be used:
Further, although some embodiments are described above in the context of Msg3 repetition, the present disclosure is not limited thereto. In fact, a feature other than Msg3 repetition may also be requested via the mechanism proposed above. In some embodiments, the feature may comprises at least one of: Msg3 repetition, MsgA repetition, a network slice, Non-small data transmission (Non-SDT), a UE with reduced capability (RedCap UE), a random access in non-terrestrial network, and a specific service type or UE priority.
For example, some of the above embodiments may also applicable to the feature “MsgA repetition”. To be specific, when the RSRP for DL pathloss reference is lower than a repetition threshold, the UE 110 may select PRACH resource (e.g., a specific PRACH preamble and/or specific PRACH occasion) for its PRACH transmission, and upon detection of the PRACH transmission over the selected PRACH resource, the gNB 120 may determine that the UE 110 is requesting for MsgA repetition and may act accordingly.
In some embodiments, some of the above embodiments may also applicable to the feature “Non-SDT”. To be specific, when the RSRP for DL pathloss reference is higher than or equal to a repetition threshold, the UE 110 may select PRACH resource (e.g., a specific PRACH preamble and/or specific PRACH occasion) for its PRACH transmission, and upon detection of the PRACH transmission over the selected PRACH resource, the gNB 120 may determine that the UE 110 is requesting for SDT and may act accordingly.
With these embodiments, effective selection of SSB and PRACH resources in a network when a specific feature is enabled may be achieved, so that UEs can be improved with the enabled feature while legacy UE is not affected.
The method 1100 may begin at step S1110 where a configuration for physical random access channel (PRACH) transmission may be received.
At step S1120, a first PRACH resource, which is to be used for the PRACH transmission and indicates whether a feature is requested or not, may be determined at least partially based on the received configuration and one or more measurements at the UE.
At step S1130, the PRACH transmission may be transmitted to the network node by using the first PRACH resource.
In some embodiments, the first PRACH resource may comprise at least one of:—a PRACH time/frequency resource; and—a PRACH preamble sequence. In some embodiments, the feature may comprise at least one of:—Msg3 repetition;—MsgA repetition;—a network slice;—Non-small data transmission (Non-SDT);—a UE with reduced capability (RedCap UE);—a random access in non-terrestrial network; and—a specific service type or UE priority.
In some embodiments, the step of determining the first PRACH resource may comprise: determining whether the feature is requested or not at least partially based on the received configuration and a first measurement at the UE; selecting one of multiple synchronous signal blocks (SSBs) broadcasted by the network node at least partially based on the received configuration and one or more second measurements at the UE; and determining the first PRACH resource at least partially based on the selected SSB and the determination of whether the feature is requested or not.
In some embodiments, the step of determining whether the feature is requested or not may comprise: determining whether reference signal received power (RSRP) of a downlink pathloss reference, which is measured at the UE, is higher than or equal to a first threshold indicated by the received configuration or not; and determining that the feature is not requested in response to determining that the RSRP of the downlink pathloss reference is higher than or equal to the first threshold. In some embodiments, the step of determining whether the feature is requested or not may comprise: determining whether RSRP of a downlink pathloss reference, which is measured at the UE, is higher than or equal to a first threshold indicated by the received configuration or not; and determining that the feature is requested in response to determining that the RSRP of the downlink pathloss reference is lower than the first threshold.
In some embodiments, the selected SSB may be one of:—a first SSB that is first determined to have a measured RSRP higher than a second threshold indicated by the received configuration;—a second SSB that is first determined to have a measured RSRP higher than a third threshold indicated by the received configuration;—a third SSB having the highest measured RSRP that is higher than the second threshold;—a fourth SSB having the highest measured RSRP that is higher than the third threshold;—a fifth SSB having the highest measured RSRP that is lower than or equal to the second threshold;—a sixth SSB having the highest measured RSRP that is lower than or equal to the second threshold but higher than the third threshold;—a seventh SSB having the highest measured RSRP that is lower than or equal to the third threshold; and—an eighth SSB that is randomly selected and has a measured RSRP lower than or equal to the second threshold and/or the third threshold. In some embodiments, the second threshold may be indicated by an information element (IE) “rsrp-ThresholdSSB” in the configuration, and the third threshold may be indicated by a second IE in the configuration or jointly indicated by the IE “rsrp-ThresholdSSB” and a third IE in the configuration that indicates an offset.
In some embodiments, the step of determining the first PRACH resource at least partially based on the selected SSB and the determination of whether the feature is requested or not may comprise at least one of: determining a PRACH resource, which is associated with the selected SSB and indicates the feature is not requested, as the first PRACH resource in response to determining that the feature is not requested and in response to the selected SSB being the first or third SSB; determining a PRACH resource, which is associated with the selected SSB and indicates the feature is not requested, as the first PRACH resource in response to determining that the feature is not requested and in response to the selected SSB being the fifth or eighth SSB; determining a PRACH resource, which is associated with the selected SSB and indicates the feature is requested, as the first PRACH resource in response to determining that the feature is requested and in response to the selected SSB being the first or third SSB; and determining a PRACH resource, which is associated with the selected SSB and indicates the feature is requested, as the first PRACH resource in response to determining that the feature is requested and in response to the selected SSB being the fifth or eighth SSB.
In some embodiments, the step of determining the first PRACH resource at least partially based on the selected SSB and the determination of whether the feature is requested or not may comprise at least one of: determining a PRACH resource, which is associated with the selected SSB and indicates the feature is not requested, as the first PRACH resource in response to determining that the feature is not requested and in response to the selected SSB being the first or third SSB; determining a PRACH resource, which is associated with the selected SSB and indicates the feature is not requested, as the first PRACH resource in response to determining that the feature is not requested and in response to the selected SSB being the fifth or eighth SSB; determining a PRACH resource, which is associated with the selected SSB and indicates the feature is requested, as the first PRACH resource in response to determining that the feature is requested and in response to the selected SSB being the second or fourth SSB; and determining a PRACH resource, which is associated with the selected SSB and indicates the feature is requested, as the first PRACH resource in response to determining that the feature is requested and in response to the selected SSB being the seventh or eighth SSB.
In some embodiments, the step of determining the first PRACH resource at least partially based on the selected SSB and the determination of whether the feature is requested or not may comprise at least one of: determining a PRACH resource, which is associated with the selected SSB and indicates the feature is not requested, as the first PRACH resource in response to determining that the feature is not requested and in response to the selected SSB being the first or third SSB; determining a PRACH resource, which is associated with the selected SSB and indicates the feature is requested, as the first PRACH resource in response to determining that the feature is not requested and in response to the selected SSB being the sixth SSB; determining a PRACH resource, which is associated with the selected SSB and indicates the feature is requested, as the first PRACH resource in response to determining that the feature is requested and in response to the selected SSB being the second or fourth SSB; and determining a PRACH resource, which is associated with the selected SSB and indicates the feature is requested, as the first PRACH resource in response to determining that the feature is requested and in response to the selected SSB being the seventh or eighth SSB.
In some embodiments, after the step of determining whether the feature is requested or not, the method 1100 may further comprise at least one of:—setting the variable “RA_TYPE” at the UE to indicate whether the feature is requested or not, wherein the variable “RA_TYPE” has a value indicating 2-stepRA, 4-stepRA, or 4-stepRA-rep based on the determination;—setting a variable different from the variable “RA TYPE” at the UE to indicate whether its access type is a random access with the feature or not based on the determination; and—setting a variable different from the variable “RA_TYPE” at the UE to indicate whether the UE shall signal, to the network node, that the feature is requested or not based on the determination.
In some embodiments, the step of determining the first PRACH resource may comprise: selecting one of multiple SSBs broadcasted by the network node at least partially based on the received configuration and one or more second measurements at the UE; determining whether the feature is requested or not at least partially based on at least one of:—the received configuration and a first measurement at the UE;—the received configuration and the one or more second measurements at the UE; and—the selected SSB; and determining the first PRACH resource at least partially based on the selected SSB and the determination of whether the feature is requested or not.
In some embodiments, the selected SSB may be one of:—a first SSB that is first determined to have a measured RSRP higher than a second threshold indicated by the received configuration;—a second SSB that is first determined to have a measured RSRP higher than the second threshold or a third threshold indicated by the received configuration;—a third SSB that is first determined to have a measured RSRP higher than a fourth threshold indicated by the received configuration;—a fourth SSB having the highest measured RSRP that is higher than the second threshold;—a fifth SSB having the highest measured RSRP that is higher than the second or third threshold;—a sixth SSB having the highest measured RSRP that is higher than the fourth threshold;—a seventh SSB having the highest measured RSRP that is lower than or equal to the second threshold;—an eighth SSB having the highest measured RSRP that is lower than or equal to both of the second threshold and the third threshold;—a ninth SSB having the highest measured RSRP that is lower than or equal to the fourth threshold; and—a tenth SSB that is randomly selected and has a measured RSRP lower than or equal to the second threshold and/or the third threshold and/or the fourth threshold. In some embodiments, the second threshold may be indicated by an information element (IE) “rsrp-ThresholdSSB” in the configuration, wherein the third threshold may be indicated by a second IE in the configuration or jointly indicated by the IE “rsrp-ThresholdSSB” and a third IE in the configuration that indicates an offset; and wherein the fourth threshold may be indicated by a fourth IE in the configuration.
In some embodiments, the step of determining whether the feature is requested or not may comprise: determining whether RSRP of a downlink pathloss reference, which is measured at the UE, is higher than or equal to a first threshold indicated by the received configuration or not; and determining that the feature is not requested in response to determining that the RSRP of the downlink pathloss reference is higher than or equal to the first threshold.
In some embodiments, the step of determining whether the feature is requested or not may comprise: determining whether RSRP of a downlink pathloss reference, which is measured at the UE, is higher than or equal to a first threshold indicated by the received configuration or not; and determining that the feature is requested in response to determining that the RSRP of the downlink pathloss reference is lower than the first threshold.
In some embodiments, the step of determining whether the feature is requested or not may comprise: determining whether the RSRP of the selected SSB is higher than the third threshold or not; and determining that the feature is requested in response to determining that the RSRP of the selected SSB is lower than or equal to the third threshold.
In some embodiments, the step of determining whether the feature is requested or not may comprise: determining whether the RSRP of the selected SSB is higher than the third threshold or not; and determining that the feature is not requested in response to determining that the RSRP of the selected SSB is higher than the third threshold.
In some embodiments, the step of determining whether the feature is requested or not may comprise: determining that the feature is requested in response to determining that the selected SSB is the eighth SSB.
In some embodiments, the step of determining whether the feature is requested or not may comprise: determining that the feature is not requested in response to determining that the selected SSB is the first or fourth SSB.
In some embodiments, the step of determining whether the feature is requested or not may comprise: determining whether the RSRP of the selected SSB is higher than the third threshold or not; and determining that the feature is requested in response to determining that the RSRP of the selected SSB is higher than the third threshold.
In some embodiments, the step of determining whether the feature is requested or not may comprise: determining whether the RSRP of the selected SSB is higher than or equal to the fourth threshold plus a repetition offset indicated by the received configuration or not; and determining that the feature is not requested in response to determining that the RSRP of the selected SSB is higher than or equal to the fourth threshold plus the repetition offset.
In some embodiments, the step of determining whether the feature is requested or not may comprise: determining whether the RSRP of the selected SSB is higher than or equal to the fourth threshold plus a repetition offset indicated by the received configuration or not; and determining that the feature is requested in response to determining that the RSRP of the selected SSB is lower than the fourth threshold plus the repetition offset.
In some embodiments, the step of determining whether the feature is requested or not may comprise: determining that the feature is requested in response to determining that the RSRP of the selected SSB is lower than the fourth threshold.
In some embodiments, the step of determining the first PRACH resource at least partially based on the selected SSB and the determination of whether the feature is requested or not may comprise at least one of: determining a PRACH resource, which is associated with the selected SSB and indicates the feature is not requested, as the first PRACH resource in response to determining that the feature is not requested and in response to the selected SSB being the first or fourth SSB; determining a PRACH resource, which is associated with the selected SSB and indicates the feature is requested, as the first PRACH resource in response to determining that the feature is requested and in response to the selected SSB being the first or fourth SSB; determining a PRACH resource, which is associated with the selected SSB and indicates the feature is not requested, as the first PRACH resource in response to determining that the feature is not requested and in response to the selected SSB being the seventh or tenth SSB; and determining a PRACH resource, which is associated with the selected SSB and indicates the feature is requested, as the first PRACH resource in response to determining that the feature is requested and in response to the selected SSB being the seventh or tenth SSB.
In some embodiments, the step of determining the first PRACH resource at least partially based on the selected SSB and the determination of whether the feature is requested or not may comprise at least one of: determining a PRACH resource, which is associated with the selected SSB and indicates the feature is not requested, as the first PRACH resource in response to determining that the feature is not requested and in response to the selected SSB being the second or fifth SSB; determining a PRACH resource, which is associated with the selected SSB and indicates the feature is requested, as the first PRACH resource in response to determining that the feature is requested and in response to the selected SSB being the second or fifth SSB; determining a PRACH resource, which is associated with the selected SSB and indicates the feature is requested, as the first PRACH resource in response to determining that the feature is requested and in response to the selected SSB being the eighth or tenth SSB.
In some embodiments, the step of determining the first PRACH resource at least partially based on the selected SSB and the determination of whether the feature is requested or not may comprise at least one of: determining a PRACH resource, which is associated with the selected SSB and indicates the feature is not requested, as the first PRACH resource in response to determining that the feature is not requested and in response to the selected SSB being the first or fourth SSB; determining a PRACH resource, which is associated with the selected SSB and indicates the feature is requested, as the first PRACH resource in response to determining that the feature is requested and in response to the selected SSB being the seventh or tenth SSB.
In some embodiments, the step of determining the first PRACH resource at least partially based on the selected SSB and the determination of whether the feature is requested or not may comprise at least one of: determining a PRACH resource, which is associated with the selected SSB and indicates the feature is not requested, as the first PRACH resource in response to determining that the feature is not requested and in response to the selected SSB being the third or sixth SSB; determining a PRACH resource, which is associated with the selected SSB and indicates the feature is requested, as the first PRACH resource in response to determining that the feature is requested and in response to the selected SSB being the third or sixth SSB; determining a PRACH resource, which is associated with the selected SSB and indicates the feature is requested, as the first PRACH resource in response to determining that the feature is requested and in response to the selected SSB being the ninth or tenth SSB.
In some embodiments, the step of determining the first PRACH resource at least partially based on the selected SSB and the determination of whether the feature is requested or not may comprise: determining a PRACH resource, which indicates the feature is requested, as the first PRACH resource in response to determining that the UE is in a connected state with the network node and at least one pre-defined condition is met.
In some embodiments, the at least one pre-defined condition may comprise at least one of:—the PRACH transmission is used for beam failure recovery (BFR);—the PRACH transmission is used for uplink synchronization;—the PRACH transmission is used for Radio Resource Control (RRC) connection re-establishment; and—the PRACH transmission is used for Scheduling Request (SR) failure.
In some embodiments, before the step of determining the first PRACH resource, the method 1100 may further comprise: receiving, from the network node, an indicator for each of one or more of the at least one pre-defined condition.
In some embodiments, the step of determining the first PRACH resource at least partially based on the selected SSB and the determination of whether the feature is requested or not may comprise: determining a PRACH resource, which indicates the feature is requested, as the first PRACH resource in response to determining that the timing advance (TA) for the UE is changed by a value greater than a TA threshold.
In some embodiments, the step of determining the first PRACH resource at least partially based on the selected SSB and the determination of whether the feature is requested or not may comprise: determining a PRACH resource, which indicates the feature is requested, as the first PRACH resource in response to determining that a distance between the UE and the network node is longer than a distance threshold.
In some embodiments, when the feature is not MsgA repetition, the method 1100 may further comprise: receiving, from the network node, a random access response (RAR) comprising an indicator indicating whether the feature is to be used or not; and transmitting, to the network node, a Msg3 with or without the feature depending on the received indicator.
The method 1200 may begin at step S1210 where a configuration for physical random access channel (PRACH) transmission may be broadcasted or transmitted to the UE.
At step S1220, the PRACH transmission may be received by using a first PRACH resource, the first PRACH resource itself indicating whether a feature is requested by the UE or not.
At step S1230, a random access response (RAR) may be transmitted to the UE at least partially based on whether the feature is requested by the UE or not.
In some embodiments, the first PRACH resource may comprise at least one of:—a PRACH time/frequency resource; and—a PRACH preamble sequence. In some embodiments, the feature may comprise at least one of:—Msg3 repetition;—MsgA repetition;—a network slice;—Non-small data transmission (Non-SDT);—a UE with reduced capability (RedCap UE);—a random access in non-terrestrial network; and—a specific service type or UE priority.
In some embodiments, the configuration may comprise at least one of:—a first threshold for determining whether the feature can be requested or not;—a second threshold for both a non-Msg3-repetition-capable UE and a Msg3-repetition-capable UE to determine whether a SSB can be selected or not;—a third threshold for determining, alone or together with the second threshold, whether a SSB can be selected or not when the feature is to be requested; and—a fourth threshold for a Msg3-repetition-capable UE only to determine whether a SSB can be selected or not.
In some embodiments, the method 1200 may further comprise: for each of at least one of following pre-defined conditions, broadcasting or transmitting, to the UE, an indicator to indicate that the feature can be always requested if the corresponding condition is met:—the PRACH transmission is used for beam failure recovery (BFR);—the PRACH transmission is used for uplink synchronization;—the PRACH transmission is used for Radio Resource Control (RRC) connection re-establishment; and—the PRACH transmission is used for Scheduling Request (SR) failure.
In some embodiments, when the feature is not MsgA repetition, the method 1200 may further comprise: receiving, from the UE, a Msg3 with the feature enabled or disabled depending on the RAR.
Furthermore, the arrangement 1300 may comprise at least one computer program product 1308 in the form of a non-volatile or volatile memory, e.g., an Electrically Erasable Programmable Read-Only Memory (EEPROM), a flash memory and/or a hard drive. The computer program product 1308 comprises a computer program 1310, which comprises code/computer readable instructions, which when executed by the processing unit 1306 in the arrangement 1300 causes the arrangement 1300 and/or the UE/network node in which it is comprised to perform the actions, e.g., of the procedure described earlier in conjunction with
The computer program 1310 may be configured as a computer program code structured in computer program modules 1310A, 1310B, and 1310C. Hence, in an exemplifying embodiment when the arrangement 1300 is used in a UE, the code in the computer program of the arrangement 1300 includes: a module 1310A for receiving a configuration for physical random access channel (PRACH) transmission; a module 1310B for determining a first PRACH resource, which is to be used for the PRACH transmission and indicates whether a feature is requested or not, at least partially based on the received configuration and one or more measurements at the UE; and a module 1310C for transmitting, to the network node, the PRACH transmission by using the first PRACH resource.
Further, the computer program 1310 may be further configured as a computer program code structured in computer program modules 1310D, 1310E, and 1310F. Hence, in an exemplifying embodiment when the arrangement 1300 is used in a network node, the code in the computer program of the arrangement 1300 includes: a module 1310D for broadcasting or transmitting, to the UE, a configuration for physical random access channel (PRACH) transmission; a module 1310E for receiving the PRACH transmission by using a first PRACH resource, the first PRACH resource itself indicating whether a feature is requested by the UE or not; and a module 1310F for transmitting, to the UE, a random access response (RAR) at least partially based on whether the feature is requested by the UE or not.
The computer program modules could essentially perform the actions of the flow illustrated in
Although the code means in the embodiments disclosed above in conjunction with
The processor may be a single CPU (Central processing unit), but could also comprise two or more processing units. For example, the processor may include general purpose microprocessors; instruction set processors and/or related chips sets and/or special purpose microprocessors such as Application Specific Integrated Circuit (ASICs). The processor may also comprise board memory for caching purposes. The computer program may be carried by a computer program product connected to the processor. The computer program product may comprise a computer readable medium on which the computer program is stored. For example, the computer program product may be a flash memory, a Random-access memory (RAM), a Read-Only Memory (ROM), or an EEPROM, and the computer program modules described above could in alternative embodiments be distributed on different computer program products in the form of memories within the UE and/or the network node.
Correspondingly to the method 1100 as described above, an exemplary user equipment is provided.
The UE 1400 may be configured to perform the method 1100 as described above in connection with
The above modules 1410, 1420, and/or 1430 may be implemented as a pure hardware solution or as a combination of software and hardware, e.g., by one or more of: a processor or a micro-processor and adequate software and memory for storing of the software, a Programmable Logic Device (PLD) or other electronic component(s) or processing circuitry configured to perform the actions described above, and illustrated, e.g., in
Correspondingly to the method 1200 as described above, a network node is provided.
The network node 1500 may be configured to perform the method 1200 as described above in connection with
The above modules 1510, 1520, and/or 1530 may be implemented as a pure hardware solution or as a combination of software and hardware, e.g., by one or more of: a processor or a micro-processor and adequate software and memory for storing of the software, a Programmable Logic Device (PLD) or other electronic component(s) or processing circuitry configured to perform the actions described above, and illustrated, e.g., in
With reference to
The telecommunication network 3210 is itself connected to a host computer 3230, which may be embodied in the hardware and/or software of a standalone server, a cloud-implemented server, a distributed server or as processing resources in a server farm. The host computer 3230 may be under the ownership or control of a service provider, or may be operated by the service provider or on behalf of the service provider. The connections 3221, 3222 between the telecommunication network 3210 and the host computer 3230 may extend directly from the core network 3214 to the host computer 3230 or may go via an optional intermediate network 3220. The intermediate network 3220 may be one of, or a combination of more than one of, a public, private or hosted network; the intermediate network 3220, if any, may be a backbone network or the Internet; in particular, the intermediate network 3220 may comprise two or more sub-networks (not shown).
The communication system of
Example implementations, in accordance with an embodiment, of the UE, base station and host computer discussed in the preceding paragraphs will now be described with reference to
The communication system 3300 further includes a base station 3320 provided in a telecommunication system and comprising hardware 3325 enabling it to communicate with the host computer 3310 and with the UE 3330. The hardware 3325 may include a communication interface 3326 for setting up and maintaining a wired or wireless connection with an interface of a different communication device of the communication system 3300, as well as a radio interface 3327 for setting up and maintaining at least a wireless connection 3370 with a UE 3330 located in a coverage area (not shown in
The communication system 3300 further includes the UE 3330 already referred to. Its hardware 3335 may include a radio interface 3337 configured to set up and maintain a wireless connection 3370 with a base station serving a coverage area in which the UE 3330 is currently located. The hardware 3335 of the UE 3330 further includes processing circuitry 3338, which may comprise one or more programmable processors, application-specific integrated circuits, field programmable gate arrays or combinations of these (not shown) adapted to execute instructions. The UE 3330 further comprises software 3331, which is stored in or accessible by the UE 3330 and executable by the processing circuitry 3338. The software 3331 includes a client application 3332. The client application 3332 may be operable to provide a service to a human or non-human user via the UE 3330, with the support of the host computer 3310. In the host computer 3310, an executing host application 3312 may communicate with the executing client application 3332 via the OTT connection 3350 terminating at the UE 3330 and the host computer 3310. In providing the service to the user, the client application 3332 may receive request data from the host application 3312 and provide user data in response to the request data. The OTT connection 3350 may transfer both the request data and the user data. The client application 3332 may interact with the user to generate the user data that it provides.
It is noted that the host computer 3310, base station 3320 and UE 3330 illustrated in
In
The wireless connection 3370 between the UE 3330 and the base station 3320 is in accordance with the teachings of the embodiments described throughout this disclosure One or more of the various embodiments improve the performance of OTT services provided to the UE 3330 using the OTT connection 3350, in which the wireless connection 3370 forms the last segment. More precisely, the teachings of these embodiments may improve the latency and power consumption and thereby provide benefits such as reduced user waiting time, better responsiveness, extended battery lifetime.
A measurement procedure may be provided for the purpose of monitoring data rate, latency and other factors on which the one or more embodiments improve. There may further be an optional network functionality for reconfiguring the OTT connection 3350 between the host computer 3310 and UE 3330, in response to variations in the measurement results. The measurement procedure and/or the network functionality for reconfiguring the OTT connection 3350 may be implemented in the software 3311 of the host computer 3310 or in the software 3331 of the UE 3330, or both. In embodiments, sensors (not shown) may be deployed in or in association with communication devices through which the OTT connection 3350 passes; the sensors may participate in the measurement procedure by supplying values of the monitored quantities exemplified above, or supplying values of other physical quantities from which software 3311, 3331 may compute or estimate the monitored quantities. The reconfiguring of the OTT connection 3350 may include message format, retransmission settings, preferred routing etc.; the reconfiguring need not affect the base station 3320, and it may be unknown or imperceptible to the base station 3320. Such procedures and functionalities may be known and practiced in the art. In certain embodiments, measurements may involve proprietary UE signaling facilitating the host computer's 3310 measurements of throughput, propagation times, latency and the like. The measurements may be implemented in that the software 3311, 3331 causes messages to be transmitted, in particular empty or ‘dummy’ messages, using the OTT connection 3350 while it monitors propagation times, errors etc.
The present disclosure is described above with reference to the embodiments thereof. However, those embodiments are provided just for illustrative purpose, rather than limiting the present disclosure. The scope of the disclosure is defined by the attached claims as well as equivalents thereof. Those skilled in the art can make various alternations and modifications without departing from the scope of the disclosure, which all fall into the scope of the disclosure.
| Number | Date | Country | Kind |
|---|---|---|---|
| PCT/CN2021/100922 | Jun 2021 | WO | international |
This application claims priority to the PCT International Application No. PCT/CN2021/100922, entitled “METHOD, USER EQUIPMENT, AND NETWORK NODE FOR FEATURE BASED RANDOM ACCESS PROCEDURE”, filed on Jun. 18, 2021, which is incorporated herein by reference in its entirety.
| Filing Document | Filing Date | Country | Kind |
|---|---|---|---|
| PCT/CN2022/088144 | 4/21/2022 | WO |
