Patent Application
20130288228
The United States and the rest of the world are facing significant challenges in finding sustainable replacements for petroleum products, which are extensively used for agriculture and transportation. Cultivated or farmed phototropic organisms, such as algae, are excellent candidates for meeting both needs, as well providing a feedstock for a variety of other products, including nutraceuticals and plastics, to name but a few. It should be understood that while the concepts disclosed herein can be applied to many different types of phototropic organisms, such concepts are particularly well suited to the cultivation of algae, both naturally occurring and engineered strains. Development of a cost-effective algae cultivation system is a key to facilitating wide-scale adoption of algae biomass farming.
The worldwide demand for algae biomass is growing. In the near future the market for nutraceuticals derived from algae (as forecast by the Nutrition Business Journal) is expected to be $500 billion in the U.S. alone, and over $2 trillion worldwide, with room for substantial growth. Pike Research predicts that the biofuel market will grow to $247 billion by 2020, up from $76 billion in 2010. The Biofuels Digest projects that algal biofuel capacity will reach 1 billion gallons by 2014. Algae wholesalers are targeting an annual production of 1.62 billion gallons, at a wholesale cost of $1.30 per gallon in 2014.
Global demand for alternative fuels is expanding, due to population growth, increased attention to energy security, and environmental policy mandates. For example, the Environmental Protection Agency established a renewable fuel volume requirement of 1.35 billion gallons in 2011. The U.S. Navy has publically announced its goal of fueling at least 50 percent of its fleet using renewable fuel sources by 2020. Achieving that objective will require a significant use of biofuels. There is also a growing demand for bio sourced oils to supplant the market currently met using soy oil and rapeseed oil.
A study by the University of Minnesota indicates that algae derived biomass performs as well as alfalfa in dairy cattle diets. If cultivation techniques can be provided on a cost effective basis, cultivated algae can provide a valuable oil fraction, a high-value protein co-product, and algae derived meal for animal feed; all while absorbing carbon dioxide from greenhouse gas emissions.
The following algae facts provide insight as to the potential of algae cultivation:
There is a need for methods and apparatuses to efficiently cultivate phototropic organisms such as algae. There is a need for an algae growing system that a farmer can purchase, and within one or two months be growing algae, monitoring his crop for nutrients and harvesting using computerized controls. Such a system should have a return on investment (ROI) measured in a number of years, and that ROI should be competitive with the ROI on conventional farm equipment, such as tractors, cultivators, and other agricultural tools having a life cycle suitable for financing.
There is a need for all-weather algae cultivating systems that are easily deployable, easy-to-use, easy-to-clean, and cost effective.
Some biofuel companies have emphasized algae growing systems that have high production rates, yet are capital and labor intensive. Others have emphasized open-pond systems that have low capital investment requirements, but are susceptible to environmental contamination and harsh weather extremes in most locations. There is a need for algae cultivating systems that operate at with good yield, high reliability and low maintenance, but require a modest capital investment, thus providing a predictable financial return.
The inventions disclosed herein provide versatile all weather closed loop phototropic organism growing systems, and methods for efficiently cultivating phototropic organisms, including but not limited to algae. Such systems and methods share the characteristics of being relatively energy efficient, and having relatively high production rates. Such systems are suitable for operating in urban or remote environments. Such systems can be operated in most environments year round to cultivate algae for a multitude of applications, from nutritional products to fuel.
In at least one embodiment, the cultivation systems disclosed herein are of a modular design (such that major components can be shipped directly to the site), can be quickly assembled in the field, and are automated with robust off-the-shelf industrial control systems equipped with a simple user interface. Growers/cultivators can use such systems to cultivate biomass to be used as animal feed, nutraceuticals, pharmaceuticals, green chemicals and bio-fuels. Significantly, waste water or brackish water can be used as a growth medium, further enhancing the economics and societal benefits of the systems.
Algae growing systems are generally categorized into ‘open pond’ systems and ‘closed loop’ systems. The biomass cultivation systems disclosed herein are based on closed loops, which are not exposed to unfiltered ambient air, and therefore are not contaminated by windblown particles. The closed loop systems disclosed herein employ photo-bio-reactors (PBR), in which algae colonies are exposed to sunlight through transparent plastic tubing disposed in the ambient environment. One aspect of the concepts disclosed herein is the combination of an externally disposed PBR array (i.e., one or more individual PBRs) with an internally disposed holding volume, where the holding volume is protected from the temperature swings of the ambient environment to which the externally disposed PBR array is exposed. The internally disposed holding volume, temperature sensors, a pumping system and computerized control systems enable algae to be transferred from the internally disposed holding volume to the externally disposed PBR array (and vice-versa), enabling temperature control of the algae growth medium (water) to be achieved at a relatively lower total energy cost as compared to closed loop systems that primarily use chillers and/or heaters to moderate the temperatures in externally disposed PBRs, due to the heat sink effect of the internally disposed holding volume and due to the insulation provided by the indoor environment protecting the algae growth medium from the extremes of the ambient environment.
In an exemplary embodiment, the biomass cultivation systems disclosed herein combine indoor growing with outdoor growing. If it gets too cold or too hot outside, the system will automatically move the algae out of the external PBR tubing to an indoor tank.
Another aspect of the concepts disclosed herein is directed to a method of facilitating algae production, in which a vendor provides components to algae farmers, as well as providing monitoring services to such farmers on a periodic basis. Such monitoring can include water analysis for establishing optimal algae growing conditions, and algae strain analysis. Another method disclosed herein involves a business entity that both manufactures algae growing systems, and operates algae farms for profit, using equipment of their own design and manufacture.
In at least one exemplary embodiment, the biomass cultivation systems disclosed herein include PBR arrays fabricated out of relatively large diameter plastic tubing that can be rigid or flexible and a variety of cross-sectional shapes. In at least one such embodiment, 40-foot long sections of round 12″ diameter rigid plastic tubing are employed. Longer sections of larger tubing can be more economical on a unit of capacity basis, because there are fewer tubing joints and fewer total components, which can increase system reliability and availability, and can reduce installation time. Non-rigid plastic tubes or rigid tubes of non-circular cross sections can have advantages with respect to cost of fabrication or cost of maintenance or light exposure.
In at least one exemplary embodiment, the biomass cultivation systems disclosed herein include racking elements configured to allow full gravity drainage of the PBR with a minimum volume of growth medium left in the tubing. Rigid plastic tubing can have a tendency to warp and sag in the heat of summer if not properly supported. The volume of material remaining in the tubing after it has been drained is referred to as “hold up.” Similarly, tubing laid out flat will not drain quickly or completely. To minimize hold-up, the PBR array should not have periodic dips in the tubing caused by uneven settling of the ground, or sags between support elements. Such dips and sags can result in sections that tilt upward in the direction of flow. In an exemplary embodiment, the racking elements provide sufficient support to prevent sagging over time, and also to maintain the concentricity of the tubing. The support structure for the tubing used in the PBR is configured such that an inlet end of the PBR can be elevated with respect to an outlet end of the PBR, so that when the outlet is opened, the growth medium in the PBR flows or drains through the outlet due to gravity. In some applications a slope of at least 4 inches per 40 feet of tubing length can be suitable.
In at least one exemplary embodiment, the biomass cultivation systems disclosed herein include sensors and control inputs facilitating the measurement and control of at least one of the following: optical Density, CO2, pH, salinity, fixed nitrogen, phosphate and/or other nutrient levels in the PBR array. More advanced instrumentation can also be suitable, for example mass or infrared absorption spectrometers to monitor concentrations of lipids, proteins and carbohydrates or other compounds such as carotenoids or for microbial contaminants such as fungi. Other sensors and control systems can enable temperature and light exposure to be similarly measured and controlled. Too much light can be harmful, and if ambient conditions indicate too much light is present, the biomass can be moved indoors into the holding volume.
In at least one exemplary embodiment, the biomass cultivation systems disclosed herein include an auxiliary temperature control system (heating, cooling, or both) for the algae growth medium to augment the ambient temperature control provided by the holding volume. A suitable auxiliary heating and/or cooling system can be configured using a variety of commercially-available components. In an exemplary embodiment, a heat pump is used for additional thermal conditioning. In such an embodiment, either the ambient air or buried tubing can be used as the thermal reservoir.
In at least one exemplary embodiment, the biomass cultivation systems disclosed herein include sensors and control inputs facilitating the measurement of algae density. This is typically reported as a biomass dry weight in grams per liter of solution. The inventions disclosed herein further encompass systems including sensors for biomass quality parameters, such as lipid content or protein content. A control system can use such measurements to maximize the biomass value, and automatically trigger harvesting when conditions meet predetermined parameters. In at least one exemplary embodiment, harvesting can be implemented from the holding tank when the growing phase has been completed.
In at least one exemplary embodiment, the biomass cultivation systems disclosed herein include one or more processing volumes or holding volumes that are configured to enable algae and algae growth medium to be moved through the system using gravity feed as well as pumping. In an exemplary, but not limiting embodiment, the high point in the fluid system is where the growing solution enters the PBR array. Throughout the PBR array, the flow path is slightly downward all the way to the exit of the PBR. From there, the flow is pumped into the holding tank (e.g., the top or bottom of the tank), or alternatively, up slightly to the PBR array entry point. This flexibility allows biomass value to be maximized based on the type of algae being grown, the stage of the growth in the algae lifecycle, nutrient conditions, sunlight conditions and ambient temperature. The downward flow path also helps minimize holdup, which is generally undesirable. The holdup has algae in it, and as the holdup dries it becomes sludge and can be difficult to remove without taking the system apart. Minimizing holdup can help to maintain high system availability, minimize maintenance cost and maximize algae production.
In at least one exemplary embodiment, the biomass cultivation systems disclosed herein include a sanitizing system that generates a chlorine based disinfectant solution from brine and electricity. A commercial supplier of such systems is Miox, Inc. of Albuquerque, N. Mex. A control system can automatically sanitize the PBR array (and if desired, the holding volume) after one or more harvest cycles are complete.
In at least one exemplary embodiment, the biomass cultivation systems disclosed herein are provided with major system components integrated into a portable, easy to transport skid mounted system. PBR arrays can be fabricated on the end user's site using plastic to bin g, as an example. Components that can be provided on one or more such skids include one or more controllers, small tubing (not associated with the PBR array), racking for the array, fittings, pump(s), valves, an optional auxiliary lighting system, sanitizing system and an auxiliary heating and cooling system. In some embodiments a back-up generator or solar array for power can also be provided. In at least some embodiments, the large diameter tubing for the PBR array can arrive in a 40 foot shipping container hauled by rail and/or tractor trailer. The holding tanks can also arrive by tractor trailer. A tilt-up building on a reinforced slab can be employed for the structure.
This Summary has been provided to introduce some concepts related to the present invention in a simplified form that are further described in detail below in the Description. However, this Summary is not intended to identify key or essential features of the claimed subject matter, nor is it intended to be used to determine the scope of the claimed subject matter.
Various aspects and attendant advantages of one or more exemplary embodiments and modifications thereto will become more readily appreciated as the same becomes better understood by reference to the following detailed description, when taken in conjunction with the accompanying drawings, wherein:
Exemplary embodiments are illustrated in referenced Figures of the drawings. It is intended that the embodiments and Figures disclosed herein are to be considered illustrative rather than restrictive. No limitation on the scope of the technology and of the claims that follow is to be imputed to the examples shown in the drawings and discussed herein. Further, it should be understood that any feature of one embodiment disclosed herein can be combined with one or more features of any other embodiment that is disclosed, unless otherwise indicated.
Disclosed herein are methods and apparatuses for biomass cultivation (using algae in an exemplary embodiment) incorporating photo bio-reactor (PBR) technology coupled with a heat sink to increase energy efficiency. A PBR array can be coupled to an indoor storage tank system (the heat sink). The indoor storage tank system can have a volume equal to or greater than the volume of the PBR array, which is located outside. A controller can be used to optimize the growth of biomass by optimizing three key growth parameters: exposure to sunlight, exposure to temperature, and exposure to nutrients. The indoor tank system serves as a holding volume to be used when ambient conditions in the PBR array are inimical to growth, minimizing the cost of energy for heating and cooling that would normally be incurred to accommodate ambient temperature swings caused by weather, if the biomass were always stored in an outdoor PBR array. When the sun is intense or the outdoor temperatures are extremely hot or cool, exposure to these elements can be minimized, optimizing growth for those conditions. During cold winter nights, the biomass can be brought indoors to conserve thermal energy. During hot summer extremes, biomass can be circulated through the PBR at night to release stored thermal energy back to the environment. Other aspects of the concepts disclosed herein include coupling the indoor storage system to a low-maintenance gravity drain system, an integrated disinfection system incorporating on-site generation of disinfectant from brine, and large diameter PBR technology incorporating technology to reduce biofilm growth on the PBR tubing surfaces.
Referring to
Holding volume 12 provides a quantity of growth medium (generally fresh or brackish water, and/or waste water) that is protected from ambient temperatures. If necessary, heating or chilling elements can be employed to thermally condition the liquid inside the holding volume. However, in many locations, merely providing a holding volume that is protected from the ambient volume will enable the growth medium to be moved out of the external PBR into a protected area where the algae colony in the growth medium is protected from harmful temperature swings.
In at least one embodiment, a secondary tank is employed to store a quantity of water to function as a thermal mass, to enable thermal management of growth medium moved into the holding volume. In such an embodiment, the water in the secondary tank is used as a coolant to exchange heat with the contents of the holding volume, for example by exchanging heat within a heat exchanger located inside the holding volume. This provides additional thermal management capabilities with a relatively modest capital and energy cost. In addition to the secondary tank and the heat exchanger in the holding volume, a pumping capability can be provided. Note most embodiments include a pump, and with proper valve arrangements an existing pump can be used to drive the water from the secondary tank through the heat exchanger in the primary tank (the holding volume). The heat exchanger includes a first portion disposed in the primary tank, and a second portion disposed proximate the ceiling of the building or near the ground. The heat exchanger can be implemented by a small tube array (to promote heat transfer). This tubing does not need to be clear (and in some applications can work best if it is black), but minimizing hold-up can be good to avoid freezing in the tubes in the winter.
In at least some embodiments, the secondary tank (functioning as a heat exchanger) has a capacity that has been selected to be sufficient to provide a desired amount of thermal conditioning to the growth medium during a 24 hour growing cycle. That volume can be selected, for example, based on winter or summer extreme temperatures. With respect to winter extremes, the volume of the secondary tank can be selected to provide enough relatively warm water to prevent the growth medium stored in the holding volume from cooling to a point that a viability of the algae colony is reduced. With respect to summer extremes, the volume of the secondary tank can be selected to provide enough relatively cool water to prevent the growth medium stored in the holding volume from warming to a point that a viability of the algae colony is reduced. Note that whenever a temperature of the growth medium in the PBR array reaches above or falls below a predetermined value, some or all of the growth medium can be moved into the holding volume so that the heat exchanger described above can thermally moderate the temperature of the growth medium. In extremely warm sunny climates, the growth medium might need to be moved out of the PBR once or more per day, to prevent the growth medium from getting too hot. Similarly, in extremely cold climates, the growth medium might need to be moved out of the PBR once or more per day, to prevent the growth medium from getting too cold.
In at least some embodiments, the holding volume has a capacity that is sufficiently large such that all of the growth media from the PBR can be transferred into the holding volume. Such embodiments can be of particular use when the night time temperatures fall so low or day time temperatures that are so high as to create hostile conditions for the algae.
In another exemplary embodiment, the holding volume has a capacity greater than the volume of the PBR array. In such an embodiment, the total volume of colonized growth medium can exceed the volume of the array. When the array is full with colonized growth medium, the growth medium can be circulated through the array and mixed with the growth medium remaining in the holding volume as it exits the array. The colonized growth medium in the holding volume can remain well mixed. The feed from the array can also come from this tank, and nutrients and CO2 can be added as needed in using automated controls. With this configuration, assuming ample days of sunlight, biomass production per unit volume of array can be greater than that achievable if the array and holding volume are of equal volume. This embodiment can be preferred in many locations across the planet where productivity is not limited by sufficient sunlight.
In an exemplary embodiment, the holding volume does not dilute the growth medium in the PBR array, as the holding volume does include a mass of water (unless the growth medium from the PBR array is moved into the holding volume). In such an embodiment, when the PBR array is full, the holding volume is empty. There is no “secondary water” in the holding tank to dilute the algae growth medium. The holding volume is like a barn, and the algae are like cows. Some or all of the algae/cows are outside in the PBR, or inside in the barn depending on whether the conditions outside are beneficial.
It should be understood that holding volume 12 can be implemented as a single structure or a plurality of different structures. In at least one embodiment the holding volume is a single tank. In an exemplary embodiment, the holding volume tank is a polymer tank. In an exemplary system, the PBR array is about 50,000 gallons, and three 17,000 gallon holding tanks are employed inside a protected area to implement the holding volume. It should be recognized that the concepts disclosed herein encompass embodiments wherein the holding volume itself is a PBR. Such a PBR will be inside a building, protected from harsh ambient temperatures. Windows, skylights, or light pipes can be used to direct sunlight into the internal PBR for additional algae growth. Artificial lighting can also be used, although such lighting will consume electricity, and depending on local instantaneous electricity cost, the additional algae growth may not offset such cost (or justify the additional capital expense of the second array with lighting).
Fluid transfer elements 14 are included to enable water (i.e., growth medium) to be transferred between the holding volume and the external PBR. Fluid transfer elements can include pipes, valves, and one or more pumps. In an exemplary embodiment any actuatable elements (such as valves and pumps) are controllably coupled to controller 18, so that such elements can be actuated automatically. In an example embodiment, at least one gravity assisted fluid transfer element can be included. For example, the holding volume can be elevated, such that when appropriate valving is opened, the growth media in the holding tank naturally flows into the external PBR.
PBR 16 is disposed outside, where the algae in the PBR can be exposed to sun light to stimulate algae growth. Some PBRs are fabricated from small diameter tubing. While efficient at light capture, such tubing is more expensive to install and maintain. In an exemplary embodiment, the PBR is fabricated from 12 inch diameter clear polymer tubing, which is much easier to install and clean. Relative to 12 inch tubing, an equivalent array volume using 6 inch tubing would require four times as much tubing length, resulting in four times as many sections of 40 foot tubing to install and clean, four times as many joints to maintain, etc.
In at least some embodiments, a robust coating can be applied to the inside of the tubing to reduce or inhibit algae from attaching to the tube wall and to inhibit or reduce bacterial biofilm growth. Oligocide, Inc., of Albuquerque, N. Mex. is an example of a vendor for coatings and additives that inhibit biofilm growth in polymeric materials. Paralene, silica or PTFE coatings can reduce algae wall attachment.
Controller 18 is used to monitor the system, and perform specific functions based on system inputs. Controller 18 can be implemented using custom logic circuits or a general purpose computing device executing machine instructions to implement specific functions. In an exemplary system, controller 18 is implemented using one or more programmable logic controllers (PLCs). A PLC is a digital computer used for automation of electromechanical processes, such as control of machinery on factory assembly lines, amusement rides, or light fixtures. PLCs are used in many industries and machines. Unlike many general-purpose computers, the PLC is designed for multiple inputs and output arrangements, extended temperature ranges, immunity to electrical noise, and resistance to vibration and impact. Programs to control machine operation are typically stored in battery-backed-up or non-volatile memory.
Sensor elements 20 can include at least one or more temperature sensors for determining the temperature inside the PBR. In some embodiments, temperature sensors are also used to determine a temperature inside the holding volume, allowing more accurate determination of how much growth medium needs to be transferred between the holding volume and the PBR to achieve the desired thermal conditioning, in embodiments where both the PBR and holding volume are partially filled with growth medium.
Additional optional sensor elements include one or more flow rate sensors, to measure a flow of water between the holding volume and the PBR.
In at least one embodiment, the system includes a sensor or combination of sensors configured to evaluate the growth medium in the PBR to determine if additional nutrients are required. That information can be conveyed to the controller, to trigger the activation of a nutrient supply system (not shown). Exemplary sensors include, but are not limited to, a CO2 sensor, a fixed nitrogen sensor, and a phosphate sensor.
In at least one embodiment, the system includes a sensor configured to evaluate whether the algae colony is ready to harvest. Exemplary sensors include, but are not limited to, UV, visible or infrared spectrometers, and/or a mass spectrometer. Turbidity meters, particle counters/sizers, and nephalometers can also be useful to estimate the bone dry biomass density. The density measurement is not only useful for the harvest decision, but can also be used to monitor growth rates throughout the growth lifecycle.
In at least one embodiment, the system includes optional harvesting elements 22, such that when the algae are ready for harvest, the controller can trigger the harvesting elements to harvest the algae crop. Harvesting elements include, but are not limited to pumps, filters, product tanks and centrifuges. The Pall Corporation of Port Washington, N.Y., is developing a filter system targeted to commercial growers of algae.
In at least one embodiment, the system includes optional sanitizing elements 24, such that after the algae are harvested, the controller can trigger the sanitizing elements to clean the PBR, readying the PBR for a new crop. MIOX Corporation of Albuquerque, N. Mex. is a developer of chlorine-based sanitizing systems that incorporate on-site generation of disinfectants. In an example embodiment, the sanitizing elements generate a chlorine based disinfectant from a brine solution. After harvest, the farmer can inoculate the growth medium in the PBR array or holding volume. The inoculant can be added with fresh water which has been suitably treated (for example, filtered and amended with nutrients and additives for pH control). In an exemplary embodiment, a separate small scale system (with triplicate redundancy) is provided to grow inoculant, so the farmer also has “seed corn” for his next planting. A small lab capability can also be provided to monitor the quality of the inoculant. The same sanitizing components can be used to sanitize the holding volume.
Not specifically shown are additional elements that can be beneficially included in system 10, including but not limited to nutrient delivery components (such as pipes, meters, and valves), nutrient supply volumes (holding one or more of carbon dioxide, nutrient rich waste water, nutrient concentrates, such as phosphorus and/or nitrogen), PBRs disposed inside a protective structure, ancillary light sources for algae growth at night or in PBRs disposed inside of the protective structure, and/or a pallet or skid upon which control equipment and/or pumps are integrated.
In an exemplary embodiment, filtered air is sparged into the holding tank when inoculating the growth medium. Sparging can also be provided during the growth cycle as required. In some embodiments, additional sparging can be implemented in the PBR array. In some embodiments, a supply of CO2 is kept on hand and can be used to augment ambient filtered air for situations where higher concentrations of CO2 are needed, and cost-justified. This can be highly specific to the strain and the instantaneous growing conditions.
It should be noted that in
Certain of the method steps described above can be implemented automatically. It should therefore be understood that the concepts disclosed herein can also be implemented by a controller, and by an automated system for implementing the steps of the method discussed above. In such a system, the basic elements include the PBR, the holding volume, sensors to measure the temperature in the PBR, fluid transfer equipment to move growth medium into and out of the PBR and holding volume, and the controller. It should be recognized that these basic elements can be combined in many different configurations to achieve the concepts discussed above. Thus, the details provided herein are intended to be exemplary, and not limiting on the scope of the concepts disclosed herein.
Also included in processing unit 254 are a random access memory (RAM) 256 and non-volatile memory 260, which can include read only memory (ROM) and may include some form of memory storage, such as a hard drive, optical disk (and drive), etc. These memory devices are bi-directionally coupled to CPU 258. Such storage devices are well known in the art. Machine instructions and data can be temporarily loaded into RAM 256 from non-volatile memory 260. Also stored in the non-volatile memory can be operating system software and other software. While not separately shown, it will be understood that a generally conventional power supply can be included to provide electrical power at voltage and current levels appropriate to energize computing system 250.
Input device 252 can be any device or mechanism that facilitates user input into the operating environment, including, but not limited to, one or more of a mouse or other pointing device, a keyboard, a microphone, a modem, or other input device. In general, the input device might be used to initially configure computing system 250, to achieve the desired processing. Configuration of computing system 250 to achieve the desired processing includes the steps of loading appropriate processing software into non-volatile memory 260, and launching the processing application (e.g., loading the processing software into RAM 256 for execution by the CPU) so that the processing application is ready for use. Output device 262 generally includes any device that produces output information, but will typically comprise a monitor or display designed for human visual perception of output. Use of a conventional computer keyboard for input device 252 and a computer monitor for output device 262 should be considered as exemplary, rather than as limiting on the scope of this system. Data link 264 is configured to enable sensor data collected by the algae growing system to be input into computing system 250. Those of ordinary skill in the art will readily recognize that many types of data links can be implemented, including, but not limited to, universal serial bus (USB) ports, parallel ports, serial ports, inputs configured to couple with portable memory storage devices, FireWire ports, infrared data ports, wireless data communication such as Wi-Fi and Bluetooth™, and network connections via Ethernet ports.
It should be understood that the term “computer” and the term “computing device” are intended to encompass networked computers, including servers and client device, coupled in private local or wide area networks, or communicating over the Internet or other such network. The data required to control the algae cultivating system can be stored by one element in such a network, retrieved for review by another element in the network, and analyzed by any of the same or yet another element in the network. Again, while implementation of the method noted above has been discussed in terms of execution of machine instructions by a processor (i.e., the computing device implementing machine instructions to carry out the specific functions noted above), at least some of the method steps disclosed herein can also be implemented using a custom circuit (such as an application specific integrated circuit or a PLC). In some embodiments control processing and sensor analysis is implemented locally (i.e., at the cultivation facility), but the concepts disclosed herein encompass sending data from the cultivation system to a remote computer for offsite processing/analysis,
As noted above, holdup can increase maintenance costs, so the spacing and number of supports 17 can be selected to prevent sagging in the array. Such sagging can undesirably lead to low spots where holdup can accumulate. The number and spacing of the supports can also be sufficient to prevent the tubing from losing concentricity.
A pump 44 can be used to pump growth medium exiting outlet 42 into holding volume 12 inside building 26. The growth medium moves through a fluid line 14a into pump 44, and then through a fluid line 14b into holding volume 12.
When the ambient conditions in PBR array 16 are suitable for algae growth, growth medium from holding volume 12 will exit the holding volume via a fluid line 14c, and pump 44 can be used to direct the growth medium into inlet 40 of PBR array 16 via a fluid line 14d.
The algae cultivation system of
It should be understood that the fluid system of
It should be further noted that rigid tubing made from other materials such as glass can be used, but has a higher initial cost. It can be less susceptible to sagging and can more easily break. Non-circular cross-sections can offer advantages for maintenance (e.g., a removable top cover) or for light penetration (a flattened oval cross-section allows more algal biomass exposure to the sun). Flexible tubing can also be used and replaced after each batch of algae is harvested. This is potentially cost-effective relative to glass or rigid plastic, but can generate more waste. If the flexible tubing is not under pressure, it will relax to the flattened oval cross-section mentioned above allowing for enhanced exposure.
The terms about and approximately, as used above and in the claims that follow, should be understood to encompass a specified parameter, plus or minus 10%.
Although the concepts disclosed herein have been described in connection with the preferred form of practicing them and modifications thereto, those of ordinary skill in the art will understand that many other modifications can be made thereto within the scope of the claims that follow. Accordingly, it is not intended that the scope of these concepts in any way be limited by the above description, but instead be determined entirely by reference to the claims that follow.
This application claims priority to U.S. application 61/639,921, filed 28 Apr. 2012, which is incorporated herein by reference.
| Number | Date | Country | |
|---|---|---|---|
| 61639921 | Apr 2012 | US |
