This invention relates generally to the discovery of a method of inhibiting, preventing or treating bacterial infections. The invention also relates to a method of inhibiting bacterial capsule biogenesis.
Uropathogenic Escherichia coli (UPEC) is the leading cause of community-acquired urinary tract infections (UTIs). Over 100 million UTIs occur annually throughout the world, including more than 7 million cases in U.S. adolescents and adults (14). UTIs in younger children are associated with greater risk of morbidity and mortality than in older children and adults. Antimicrobial resistance among UPEC is on the rise (10, 15-18), driving efforts to discover vulnerable targets in the molecular pathogenesis of infection.
During UTI, UPEC lives in intracellular and extracellular locales. UPEC adheres to the apical bladder epithelium and invades into it (19-21). Within the bladder epithelium, UPEC typically reproduces in a biofilm-like state called intracellular bacterial communities (IBC; (5)). After maturation of IBCs, UPEC disperses away from the IBC and exits the infected cells. Extracellular UPEC must then re-adhere, initiating the invasion and intracellular reproduction phases again. Past studies have revealed bacteria encased in the IBC within a complex matrix of fibrous protein assemblies and polysaccharides (5). Our prior studies have also shown that disruption of the IBC pathway aborts experimental UTI, highlighting the importance of this intracellular lifecycle (22-25). A detailed study of urine samples from women with acute UTI demonstrated IBC in shed bladder epithelial cell, showing that the pathway is conserved in humans (26).
Investigators have found that bacterial encapsulation is an important UPEC virulence factor (4-6), and experiments show that the K capsule contributes to multiple aspects of pathogenesis, including IBC formation. K capsules, also called K antigens, are enveloping structures composed of high-molecular-weight polysaccharides. Among UPEC, the K antigens K1, K2, K5, K30, and K92 are thought to be most prevalent (27). Capsules are well-established virulence factors for a variety of pathogens that are thought to protect the cell from opsonophagocytosis and complement-mediated killing (reviewed in (28, 29)). While they did not study the effects of K antigen from UPEC, Llobet et al. recently demonstrated that the highly acidic polysaccharide capsules of diverse organisms including Klebsiella pneumoniae, Pseudomonas aeruginosa, and Streptococcus pneumoniae interact strongly with APs, acting as “sponges” to sequester and neutralize the APs (30).
Of the different K types, the Group 2 and Group 3 capsules are most prevalent among UPEC isolates, with K1 and K5 being leading types. Although the capsules have different compositions, they are regulated, synthesized, assembled, and exported by functionally homologous factors, leading us to hypothesize that we can develop small molecular inhibitors of K-type encapsulation that target the most medically important K capsule types. Furthermore, the medically important infectious agents Campylobacter jejuni, Haemophilus influenzae, Neisseria meningitides, and Salmonella typhimurium among others, use homologous components in the biogenesis of their capsules. The K1 capsule type is closely associated with pathogenic isolates; not only is it the leading type in UTI, but it also accounts for much of the extra-urinary tract complications. Animals studies of E. coli K1 sepsis demonstrated that injection of a K1 capsule degrading enzyme abrogates infection (7). However, the enzyme treatment is immunogenic; accordingly, chemical inhibition may prove to be a superior approach.
There are currently no therapeutics that specifically inhibit the formation of any bacterial capsule, and this is a novel strategy for preventing or decreasing the prevalence of chronic or re-occurring urinary tract infections. New insights into the roles of K1 capsules in UPEC virulence during UTI make capsules an attractive target for therapeutic intervention. Antimicrobial resistance among UPEC is on the rise (11, 12, 15, 31, 32), and the discovery of novel small molecules that can act as probes or lead compounds for the investigation and treatment of UTI will add to the arsenal of compounds available for single or combination therapies.
In another non-limiting embodiment, the invention provides compounds having the structure below:
wherein each X may independently be CH or N;
each R1, R2, and R3 may independently be aryl, C1-8 alkyl, C1-8 alkyl(aryl), C1-8 alkoxy, C1-8 alkoxy aryl, C2-8 alkenyl, C3-8 alkynyl, C3-8 cycloalkyl, —CF3, —(CH2)xNR4R5, —CN, —CONR4R5, —COR4, —CO2(CH2)xNR4R5, —CO2R4, haloaryl, halogen, hydroxyl, —N3, —NHCOR4, —NHSO2C1-8 alkyl, —NHCO2C1-8 alkyl, —NO2, —NR4R5, —O(CH2)xNR4R5, —O(CH2)xCO2R4, —OCOC1-8 alkyl, —OCO(CH2)xNR4R5, —SO(1-3)R4, or —SR4; each R4 and R4 are independently aryl, C1-8 alkyl, C1-8 alkyl alcohol, C1-8 alkyl amino, C1-8 alkyl amido, C1-8 alkyl(aryl), C1-8 alkyl (C3-8 cycloalkyl), C1-8 alkyl guanidinyl, C1-8 alkyl heteroaryl, C1-8 alkyl imidazolyl, C1-8 alkyl indolyl, C1-8 alkyl thioether, C1-8 alkyl thiol, C2-8 alkenyl, C3-8 alkynyl, C3-8 cycloalkyl, or H; or R4 and R5 together make a 4-8 member ring which may be substituted with one or more heteroatoms; n is 0, 1, 2, 3, 4 or 5; and each x is independently 0-8.
The invention also provides compounds and uses having the structure:
wherein each R1, R2, and R3 may independently be C1-8 alkyl, C1-8 alkyl(aryl), C1-8 alkoxy, C1-8 alkoxy aryl, C2-8 alkenyl, C3-8 alkynyl, C3-8 cycloalkyl, —CF3, —CN, halogen, or hydrogen. The compound where R1, R2, and R3 are each hydrogen is also referred to as DU003 or ML333 is this disclosure.
In another non-limiting embodiment, the invention provides compounds having the structure below:
each R1, R2, and R3 may independently be aryl, C1-8 alkyl, C1-8 alkyl(aryl), C1-8 alkoxy, C1-8 alkoxy aryl, C2-8 alkenyl, C3-8 alkynyl, C3-8 cycloalkyl, —CF3, —(CH2)xNR4R5, —CN, —CONR4R5, —COR4, —CO2(CH2)xNR4R5, —CO2R4, haloaryl, halogen, hydroxyl, —N3, —NHCOR4, —NHSO2C1-8 alkyl, —NHCO2C1-8 alkyl, —NO2, —NR4R5, —O(CH2)xNR4R5, —O(CH2)xCO2R4, —OCOC1-8 alkyl, —OCO(CH2)xNR4R5, —SO(1-3)R4, or —SR4; each R4 and R4 are independently aryl, C1-8 alkyl, C1-8 alkyl alcohol, C1-8 alkyl amino, C1-8 alkyl amido, C1-8 alkyl(aryl), C1-8 alkyl (C3-8 cycloalkyl), C1-8 alkyl guanidinyl, C1-8 alkyl heteroaryl, C1-8 alkyl imidazolyl, C1-8 alkyl indolyl, C1-8 alkyl thioether, C1-8 alkyl thiol, C2-8 alkenyl, C3-8 alkynyl, C3-8 cycloalkyl, or H; or R4 and R5 together make a 4-8 member ring which may be substituted with one or more heteroatoms; n is 0, 1, 2, 3, 4 or 5; and each x is independently 0-8.
The invention also provides compounds and uses having the structure:
wherein each R1, R6, and R7 may independently be C1-8 alkyl, C1-8 alkyl(aryl), C1-8 alkoxy, C1-8 alkoxy aryl, C2-8 alkenyl, C3-8 alkynyl, C3-8 cycloalkyl, —CF3, —CN, halogen, or hydrogen.
The Compound 3 where R1 is ethoxy, R6 and R7 are each fluorine is also referred to as DU011 or ML317 is this disclosure.
In particular non-limiting embodiments, the present invention provides a method of inhibiting capsule biogenesis in a bacterium which comprises administering to the bacterium an effective amount of a composition comprising N-pyridin-4-yl-1,3-benzothiazole-6-carboxamide, an analogue thereof, a derivative thereof (such as Compound 1), or a substituted pyridinyl derivative thereof, or salt thereof.
The invention also provides a method of treating a subject suffering from a bacterial infection comprising administering a therapeutically effective amount of a composition comprising N-pyridin-4-yl-1,3-benzothiazole-6-carboxamide, an analogue thereof, a derivative thereof (such as Compound 1), or a substituted pyridinyl derivatives thereof, and/or salts thereof. The bacterial infection may be a urinary tract infection (UTI), a bladder infection, a kidney infection, or a disseminated staphylococcus infection.
The bacterium may be a gram-negative bacteria such as a Campylobacter jejuni, Enterobacter cloacae, Haemophilus influenzae, Klebsiella pneumoniae, Legionella pneumophila, Methicillin-resistant Staphylococcus aureus (MRSA), Neisseria meningitides, Proteus mirabilis, Pseudomonas aeruginosa, Salmonella typhimurium, Serratia marcescens, Staphylococcus aureus, or a combination thereof. In the methods above, they may further comprise administering an agent that targets a bacterial cell wall such as a penicillin or a cephalosporin.
The subject may be a mammal such as a human.
Uropathogenic Escherichia coli (UPEC) is the leading cause of community-acquired urinary tract infections (UTIs). Over 100 million UTIs occur annually throughout the world, including more than 7 million cases in U.S. adolescents and adults. UTIs in younger children are associated with greater risk of morbidity and mortality than in older children and adults. During UTI, UPEC exists in both intracellular and extracellular spaces. Infection is initiated by adherence to the apical bladder epithelium and then invading this layer of cells. Within the bladder epithelium, UPEC typically reproduces in a biofilm-like state composed of intracellular bacterial communities (IBC). After maturation of IBCs, UPEC disperses away from the IBC and exits the infected cells. Extracellular UPEC must then re-adhere, initiating the invasion and intracellular propagation phases again. Bacterial-epithelial interactions incite a strong inflammatory response through which the UPEC must persist. One persistence factor is the K type polysaccharide capsule. Capsule protects against phagocytosis, complement action, and antimicrobial peptide killing. Recent studies have also revealed that capsule along with fibrous protein assemblies is a key part of the IBC formation. Antimicrobial resistance among UPEC is increasing, driving efforts to identify therapeutic targets in the molecular pathogenesis of infection. Capsules are an attractive target because of new insights into the roles of bacterial K capsules in UPEC virulence during UTI. Specific investigations have shown that K capsule contributes to multiple aspects of pathogenesis, including IBC formation. In this program, the team used a cell-based assay to screen 335,740 compounds from the MLSMR library and identified 1,767 hits that inhibited K1 bacterial capsule formation. Of those hits, 59 were confirmed as active in a dose-responsive manner and eight compounds were shown in secondary assays to specifically inhibit capsule formation. Of those eight compounds, three were further characterized for structure-activity relationships, mechanism of action, and selectivity. The probe compound, N-(pyridin-4-yl)benzo[d]thiazole-6-carboxamide, was identified as a small molecule inhibitor of K1 capsule formation with an IC50 value of 1.04±0.13 μM and a >200-fold selectivity index (SI) in BC5637 bladder cells. The probe has been broadly profiled for off-target liabilities and assessed for aqueous solubility, parallel artificial membrane permeability, and hepatocyte microsome and plasma stability. It is suitable for use as a lead compound for inhibition of K1 capsule formation.
Probe Structure & Characteristics:
aCalculated as CC50/IC50
Through the efforts of the Seed lab toward developing assay and screening techniques for inhibitors of bacterial capsule biogenesis, a library of 2,195 compounds obtained from the Developmental Therapeutics Program at the National Cancer Institute was tested. In the K1F phage lysis 96-well plate format assay, 35 (1.59%) of the compounds were found to have inhibitory activity, of which only nine compounds gave reproducible phage lysis inhibition activity in shaken tube format. These nine compounds were taken onto a secondary screening process from which two capsule biogenesis inhibitors emerged. Malachite green oxalate (NCS5550), a compound not known to inhibit capsule biogenesis, was found to produce metabolites with previously reported toxicities to mammalian systems and was thus discarded. The second inhibitor, 2-(4-phenylphenyl)-benzo[g]quinoline-4-carboxylic acid (NSC136469), or C7, was employed as a prototype small molecule inhibitor of capsule biogenesis since it inhibited K1F phage lysis of UPEC K1 strain UTI80 reproducibly in the tests following HTS. Furthermore, this inhibition was found to behave in a dose-dependent manner with the inhibitory effect reaching saturation at approximately 25 μM C7, producing approximately 50% inhibition of K1F phage lysis of UPEC at 12.5-25 μM (33).
This team previously reported a probe ML317 that arose from the same high-throughput screen that led to the probe ML333 reported herein. In short, the probe ML317 was found to have an IC50 of 1.89 μM in a bacterial viability assay in the presence of K1 phage, a TC50 (toxicity) of 51.6 μM, a selectivity of 27, a T7 phage bacterial viability assay IC50 of <0.39 μM, and to reduce the bacterial capsule-dependent orcinol stain to 21% of the control sample. Additional biological characterization for probe ML317 is provided in Section 4.1 of this report.
Intellectual Property Landscape for the Probe Chemotype:
On Sep. 30, 2012, a search was performed using SciFinder to explore the intellectual property landscape around the probe compound ML333 and analogues from the probe chemotype. A substructure search using the structure shown revealed one patent and zero publications related to the preparation and use of N-(pyridin-4-yl)benzo[d]thiazole-6-carboxamide derivatives for use as tryptase inhibitors. No publications or patents reporting the use of ML333 derivatives as antibacterial agents were found.
“Preparation of (hetero)arylmethlamines as tryptase inhibitors” Lively, Sarah Elizabeth; Waszkowycz, Bohdan; Harrison, Martin James; Clase, Juha Andrew; Naylor, Neil Jason PCT Int. Appl. (2001), WO 2001027096 A1 20010419.
An exact structure search on the probe ML333 using SciFinder revealed that the compound was commercially available, and no references to publications or patents were found. An exact structure search for some of the most active compounds from this chemotype (i.e., CID53484233, CID53484226, CID53484228, and CID53484225) revealed no publications or patents. Overall, these search results suggest that compounds derived from the ML333 chemotype could be claimed for use as anti-bacterial agents, specifically for the inhibition of bacterial capsule biogenesis for the treatment of bacterial infection.
The present disclosure provides compositions and methods for the treatment of bacterial infections.
The term “administration” or “administering,” as used herein, refers to providing, contacting, and/or delivery of a composition by any appropriate route to achieve the desired effect. These composition may be administered to a subject in numerous ways including, but not limited to, orally, ocularly, nasally, intravenously, topically, as aerosols, suppository, etc. and may be used in combination.
“Alkenyl” refers to an unsaturated branched, straight-chain or cyclic alkyl group having at least one carbon-carbon double bond derived by the removal of one hydrogen atom from a single carbon atom of a parent alkene. The group may be in either the Z- and E-forms (or cis or trans conformation) about the double bond(s). Typical alkenyl groups include, but are not limited to, ethenyl; propenyls such as prop-1-en-1-yl, prop-1-en-2-yl, prop-2-en-1-yl (allyl), prop-2-en-2-yl, cycloprop-1-en-1-yl; cycloprop-2-en-1-yl; butenyls such as but-1-en-1-yl, but-1-en-2-yl, 2-methyl-prop-1-en-1-yl, but-2-en-1-yl, but-2-en-1-yl, but-2-en-2-yl, buta-1,3-dien-1-yl, buta-1,3-dien-2-yl, cyclobut-1-en-1-yl, cyclobut-1-en-3-yl, cyclobuta-1,3-dien-1-yl; and the like. The alkenyl group may be substituted or unsubstituted. In certain embodiments, an alkenyl group has from 2 to 20 carbon atoms and in other embodiments from 2 to 8 carbon atoms.
“Alkoxy” refers to a radical —OR where R represents an alkyl, alkyl, cycloalkyl, aryl, or heteroaryl group as defined herein. Representative examples include, but are not limited to, methoxy, ethoxy, propoxy, butoxy, cyclohexyloxy, and the like.
“Alkyl” refers to a saturated, branched or straight-chain monovalent hydrocarbon group derived by the removal of one hydrogen atom from a single carbon atom of a parent alkane. Typical alkyl groups include, but are not limited to, methyl, ethyl, propyls such as propan-1-yl, propan-2-yl, and cyclopropan-1-yl, butyls such as butan-1-yl, butan-2-yl, 2-methyl-propan-1-yl, 2-methyl-propan-2-yl, cyclobutan-1-yl, tert-butyl, and the like. The alkyl group may be substituted or unsubstituted. In certain embodiments, an alkyl group comprises from 1 to 20 carbon atoms. Alternatively, an alkyl group may comprise from 1 to 8 carbon atoms.
“Alkyl(aryl)” refers to an acyclic alkyl group in which one of the hydrogen atoms bonded to a carbon atom, typically a terminal or sp3 carbon atom, is replaced with an aryl group. Typical alkyl(aryl) groups include, but are not limited to, benzyl, 2-phenylethan-1-yl, 2-phenylethen-1-yl, naphthylmethyl, 2-naphthylethan-1-yl, 2-naphthylethen-1-yl, naphthobenzyl, 2-naphthophenylethan-1-yl and the like. In certain embodiments, an alkyl(aryl) group can be (C6-20) alkyl(aryl) e.g., the alkyl group may be (C1-10) and the aryl moiety may be (C5-10).
“Alkynyl” refers to an unsaturated branched or straight-chain having at least one carbon-carbon triple bond derived by the removal of one hydrogen atom from a single carbon atom of a parent alkyne. Typical alkynyl groups include, but are not limited to, ethynyl, propynyl, butenyl, 2-pentynyl, 3-pentynyl, 2-hexynyl, 3-hexynyl and the like. The alkynyl group may be substituted or unsubstituted. In certain embodiments, an alkynyl group has from 3 to 20 carbon atoms and in other embodiments from 3 to 8 carbon atoms.
“Aryl” refers to a monovalent aromatic hydrocarbon group derived by the removal of one hydrogen atom from a single carbon atom of a parent aromatic ring system. Aryl encompasses 5- and 6-membered carbocyclic aromatic rings, for example, benzene or cyclopentadiene; bicyclic ring systems wherein at least one ring is carbocyclic and aromatic, for example, naphthalene, indane; or two aromatic ring systems, for example benzyl phenyl, biphenyl, diphenylethane, diphenylmethane. The aryl group may be substituted or unsubstituted.
As used herein, the term “bacteria” and “bacterium” are used interchangeable any to any bacteria that has a polysaccharide capsule. IN some embodiments, the bacteria comprises a gram-negative bacteria. In certain embodiments, the bacteria is selected from the group consisting of E. coli, C. jejuni, N. meningitides, K. kingea, Proteus mirabilis, Enterobacter cloacae, Serratia marcescens, Klebsiella pneumoniae, Legionella pneumophila, Pseudomonas aeruginosa and/or combinations thereof.
“Cycloalkyl” refers to a saturated or unsaturated cyclic alkyl group. Where a specific level of saturation is intended, the nomenclature “cycloalkanyl” or “cycloalkenyl” is used. Typical cycloalkyl groups include, but are not limited to, groups derived from cyclopropane, cyclobutane, cyclopentane, cyclohexane, and the like. The cycloalkyl group may be substituted or unsubstituted. In certain embodiments, the cycloalkyl group can be C3-10 cycloalkyl, such as, for example, C6 cycloalkyl.
“Disease” refers to any disease, disorder, condition, symptom, or indication.
“Halogen” refers to a fluoro, chloro, bromo, or iodo group.
“Heteroaryl” refers to a monovalent heteroaromatic group derived by the removal of one hydrogen atom from a single atom of a parent heteroaromatic ring system. Heteroaryl encompasses: 5- to 7-membered aromatic, monocyclic rings containing one or more, for example, from 1 to 4, or in certain embodiments, from 1 to 3, heteroatoms chosen from N, O, and S, with the remaining ring atoms being carbon; and polycyclic heterocycloalkyl rings containing one or more, for example, from 1 to 4, or in certain embodiments, from 1 to 3, heteroatoms chosen from N, O, and S, with the remaining ring atoms being carbon and wherein at least one heteroatom is present in an aromatic ring. The heteroaryl group may be substituted or unsubstituted.
For example, heteroaryl includes a 5- to 7-membered heteroaromatic ring fused to a 5- to 7-membered cycloalkyl ring and a 5- to 7-membered heteroaromatic ring fused to a 5- to 7-membered heterocycloalkyl ring. For such fused, bicyclic heteroaryl ring systems wherein only one of the rings contains one or more heteroatoms, the point of attachment may be at the heteroaromatic ring or the cycloalkyl ring. When the total number of S and O atoms in the heteroaryl group exceeds 1, those heteroatoms are not adjacent to one another. In certain embodiments, the total number of S and O atoms in the heteroaryl group is not more than 2. In certain embodiments, the total number of S and O atoms in the aromatic heterocycle is not more than 1. Typical heteroaryl groups include, but are not limited to, groups derived from acridine, arsindole, carbazole, β-carboline, chromane, chromene, cinnoline, furan, imidazole, indazole, indole, indoline, indolizine, isobenzofuran, isochromene, isoindole, isoindoline, isoquinoline, isothiazole, isoxazole, naphthyridine, oxadiazole, oxazole, perimidine, phenanthridine, phenanthroline, phenazine, phthalazine, pteridine, purine, pyran, pyrazine, pyrazole, pyridazine, pyridine, pyrimidine, pyrrole, pyrrolizine, quinazoline, quinoline, quinolizine, quinoxaline, tetrazole, thiadiazole, thiazole, thiophene, triazole, xanthene, and the like. In certain embodiments, the heteroaryl group can be between 5 to 20 membered heteroaryl, such as, for example, a 5 to 10 membered heteroaryl. In certain embodiments, heteroaryl groups can be those derived from thiophene, pyrrole, benzothiophene, benzofuran, indole, pyridine, quinoline, imidazole, oxazole, and pyrazine.
“Stereoisomer” refers to an isomer that differs in the arrangement of the constituent atoms in space. Stereoisomers that are mirror images of each other and optically active are termed “enantiomers,” and stereoisomers that are not mirror images of one another and are optically active are termed “diastereoisomers.”
“Subject” includes mammals and humans. The terms “human” and “subject” are used interchangeably herein.
“Substituted” refers to a group in which one or more hydrogen atoms are each independently replaced with the same or different substituent(s). Typical substituents include, but are not limited to, CO2H, halogen, hydroxyl, —N3, —NH2, —SO(1-3)H, or —SH.
As used herein, the term “subject” is intended to include human and non-human animals. Exemplary human subjects include a human patient having a bacterial infection. The term “non-human animals” includes all vertebrates, e.g., non-mammals (such as chickens, amphibians, reptiles) and mammals, such as non-human primates, domesticated and/or agriculturally useful animals (such as sheep, dogs, cats, cows, pigs, etc.), and rodents (such as mice, rats, hamsters, guinea pigs, etc.).
As used herein, the term “therapeutically effective” refers to a dosage of a composition (e.g., N-pyridin-4-yl-1,3-benzothiazole-6-carboxamide, analogues thereof, derivatives thereof, and/or salts thereof) that is effective for eliciting a desired effect. This term as used herein may also refer to an amount effective at bringing about a desired in vivo effect in an animal, mammal, or human, such as reducing inflammation, fever and the like that is commonly associated with a bacterial infection. A therapeutically effective amount may be administered in one or more administrations (e.g., the composition may be given as a preventative treatment or therapeutically at any stage of disease progression, before or after infection, before or after the onset of symptoms, and the like), applications or dosages and is not intended to be limited to a particular formulation, combination or administration route. It is within the scope of the present disclosure that the composition may be administered at various times during the course of infection of the subject. The times of administration and dosages used will depend on several factors, such as the goal of treatment (e.g., treating v. preventing), condition of the subject, etc. and can be readily determined by one skilled in the art. For example, in one embodiment the composition is administered at the onset of infection. In other embodiments, the composition is administered after infection, but prior to symptoms. In yet other embodiments, the composition is administered after symptoms have manifested. In yet other embodiments, the composition is administered prior to the onset of infection.
In certain embodiments, the composition may be in the form of a pharmaceutical compositions. As used herein, the term “pharmaceutical composition” refers to the combination of compound (i.e., N-pyridin-4-yl-1,3-benzothiazole-6-carboxamide, analogues thereof, derivatives thereof, and/or salts thereof) with a pharmaceutically acceptable carrier, inert or active, making the composition especially suitable for diagnostic or therapeutic use in vivo, in vivo or ex vivo. A “pharmaceutically acceptable carrier” refers to any of the standard pharmaceutical carriers, such as a phosphate buffered saline solution, water, emulsions (e.g., such as an oil/water or water/oil emulsions), and various types of wetting agents. The compositions also can include stabilizers and preservatives. For examples of carriers, stabilizers and adjuvants. (See e.g., Martin, Remington's Pharmaceutical Sciences, 15th Ed., Mack Publ. Co., Easton, Pa. (1975)).
As used herein, the term “pharmaceutically acceptable salt” refers to any pharmaceutically acceptable salt (e.g., acid or base) of a composition of the present invention which, upon administration to a subject, is capable of providing a composition of this invention or an active metabolite or residue thereof “Salts” of the compounds of the present invention may be derived from inorganic or organic acids and bases. Examples of acids include, but are not limited to, hydrochloric, hydrobromic, sulfuric, nitric, perchloric, fumaric, maleic, phosphoric, glycolic, lactic, salicylic, succinic, toluene-p-sulfonic, tartaric, acetic, citric, methanesulfonic, ethanesulfonic, formic, benzoic, malonic, naphthalene-2-sulfonic, benzenesulfonic acid, and the like. Other acids, such as oxalic, while not in themselves pharmaceutically acceptable, may be employed in the preparation of salts useful as intermediates in obtaining the compounds of the invention and their pharmaceutically acceptable acid addition salts.
Examples of bases include, but are not limited to, alkali metals (e.g., sodium) hydroxides, alkaline earth metals (e.g., magnesium), hydroxides, ammonia, and compounds of formula NW4+, wherein W is C1-4 alkyl, and the like.
Examples of salts include, but are not limited to: acetate, adipate, alginate, aspartate, benzoate, benzenesulfonate, bisulfate, butyrate, citrate, camphorate, camphorsulfonate, cyclopentanepropionate, digluconate, dodecylsulfate, ethanesulfonate, fumarate, flucoheptanoate, glycerophosphate, hemisulfate, heptanoate, hexanoate, hydrochloride, hydrobromide, hydroiodide, 2-hydroxyethanesulfonate, lactate, maleate, methanesulfonate, 2-naphthalenesulfonate, nicotinate, oxalate, palmoate, pectinate, persulfate, phenylpropionate, picrate, pivalate, propionate, succinate, tartrate, thiocyanate, tosylate, undecanoate, and the like. Other examples of salts include anions of the compounds of the present invention compounded with a suitable cation such as Na+, NH4+, and NW4+ (wherein W is a C1-4 alkyl group), and the like. For therapeutic use, salts of the compounds of the present invention are contemplated as being pharmaceutically acceptable. However, salts of acids and bases that are non-pharmaceutically acceptable may also find use, for example, in the preparation or purification of a pharmaceutically acceptable compound.
Unless defined otherwise, all technical and scientific terms used herein have the same meaning as commonly understood by one of ordinary skill in the art to which this invention belongs. The article “a” and “an” are used herein to refer to one or more than one (i.e., to at least one) of the grammatical object(s) of the article. By way of example, “an element” means one or more elements.
Throughout the specification the word “comprising,” or variations such as “comprises” or “comprising,” will be understood to imply the inclusion of a stated element, integer or step, or group of elements, integers or steps, but not the exclusion of any other element, integer or step, or group of elements, integers or steps. The present invention may suitably “comprise”, “consist of”, or “consist essentially of”, the steps, elements, and/or reagents described in the claims.
It is further noted that the claims may be drafted to exclude any optional element. As such, this statement is intended to serve as antecedent basis for use of such exclusive terminology as “solely”, “only” and the like in connection with the recitation of claim elements, or the use of a “negative” limitation.
Where a range of values is provided, it is understood that each intervening value, to the tenth of the unit of the lower limit unless the context clearly dictates otherwise, between the upper and lower limits of that range is also specifically disclosed. Each smaller range between any stated value or intervening value in a stated range and any other stated or intervening value in that stated range is encompassed within the invention. The upper and lower limits of these smaller ranges may independently be included or excluded in the range, and each range where either, neither or both limits are included in the smaller ranges is also encompassed within the invention, subject to any specifically excluded limit in the stated range. Where the stated range includes one or both of the limits, ranges excluding either or both of those included limits are also included in the invention.
The following Examples further illustrate the invention and are not intended to limit the scope of the invention. In particular, it is to be understood that this invention is not limited to particular embodiments described, as such may, of course, vary. It is also to be understood that the terminology used herein is for the purpose of describing particular embodiments only, and is not intended to be limiting, since the scope of the present invention will be limited only by the appended claims.
Introduction: Urinary tract infections are the second most common infection in humans, and the bacterium Escherichia coli accounts for >80% of the infections in the community and >50% of the nosocomial infections. Polysaccharide capsules are ubiquitous among these pathogenic strains and the mechanism of capsule biogenesis is different than that for the related commensal strains. Pathogenic E. coli causing urinary tract infections have surged in antibiotic resistance in the past decade, particularly for the most commonly used oral agents, thus necessitating the development of new targets and chemical probes against these targets to disable the organism during infection. This disclosure describes our novel development of a screening process to identify inhibitors of E. coli capsule biogenesis and discloses the identification of N-pyridin-4-yl-1,3-benzothiazole-6-carboxamide as a structural scaffold for specific capsule inhibition.
We developed a high throughput screen to identify inhibitors of capsule biogenesis that relies on the specific interactions of E. coli bacteriophage with E. coli polysaccharide capsules. The assay is shown in
Evidence of N-Pyridin-4-Yl-1,3-Benzothiazole-6-Carboxamide (Referred to as DU003) as an Inhibitor of E. coli Polysaccharide Capsule Biogenesis.
The strain of E. coli called EV36 produces the K1 polysaccharide capsule, common among many pathogenic E. coli. In the absence of K1 capsule, EV36 is subject to T7 phage binding, entry, and lysis. As an assay for capsule inhibition, EV36 was grown in the presence of increasing concentrations of N-pyridin-4-yl-1,3-benzothiazole-6-carboxamide, resulting in progressive lysis of the bacteria, indicating a dose-dependent inhibition of capsule biogenesis (
The inhibitory concentration 50% and toxicity data for N-pyridin-4-yl-1,3-benzothiazole-6-carboxamide was as follows: IC50 was 3 μM; the toxicity in primary assay >300 μM, selectivity >100; PubChemSID was 18109210. The IC50 was determined based on a K1F bacteriophage assay. The toxicity was determined using an LDH release assay in bladder epithelial cell line 5637 exposed to the compound for 4 hours. The concentration is indicated as micromolar.
The follows publications are relevant; Goller C and PC Seed. Chemical inhibition of polysaccharide capsule biogenesis as a novel class of antiinfectives. PLoS One. July 19; 5(7): e11642 which describes the screening process to identify capsule inhibitors and describes a representative probe identified in a proof-of-concept screen. The chemical class in this disclosure, as noted earlier, has not been disclosed in this publication or elsewhere to date. Anderson, G G, Goller C, Justice S, Hultgren S J, and P C Seed. K1 Polysaccharide capsule and sialic acid mediated regulation promote biofilm-like intracellular bacterial communities during cystitis. Infect Immun. 2010 78(3):963-75 which demonstrates the importance of polysaccharide capsule during virulence in urinary tract infections.
Overall Assay Strategy:
The ability of the T1 bacteriophage to bind to bacterial capsule, infect, and lyse E. coli UT189 was used as the primary assay to identify the effects of screened compounds on bacterial capsule formation. The phenotypic end-point assay measured the fluorescence generated by cellular processing of alamar Blue as a direct indicator of cell viability. A total of 335,740 compounds were screened using the primary assay. Following this, a concentration-dependent confirmatory assay (in a compound concentration range of 50-0.19 μM) was used in parallel with a eukaryotic cytotoxicity counterscreen (same concentration range) to determine hit IC50s and CC50s (and selective indices). Hits were further evaluated using three secondary assays for alternative measurement of compound-induced reduction in bacterial capsule formation (secondary assays 1 and 2) and specificity (secondary assays 3 and 4). Confirmed actives with a selective index (SI) >5 were further investigated and subjected to chemical optimization, followed by secondary assay evaluation. Secondary assays more closely characterized the ability of the compounds to reduce bacterial capsule formation and can be used to examine the mechanism of action of the compounds. The combination of primary assay (to measure capsule reduction), counter assay (for general eukaryotic cell toxicity) and secondary assay (to measure reduction in capsule formation and specificity) were combined to allow a determination of probe efficacy, selectivity, and specificity.
A chemical probe for this project was defined as a small molecule that:
Assays
A. Primary Assay: Screening for Inhibitors of Bacterial Capsule Biogenesis.
Purpose:
The primary inhibition assay using E. coli UT189 and bacteriophage K1F was conducted to screen the MLSMR 300K compound library, to confirm 1,767 hits from the primary screen, and to verify the activity for purchased/synthesized compounds.
Summary AID:
488970
Assigned AID:
488966
B. Counterscreen: Cytotoxicity Screening for Potential Inhibitors of Bacterial Capsule Biogenesis.
Purpose:
This cell-based assay measures the cytotoxicity of compounds in bladder carcinoma 5637 cells using luminescent cell viability assay readout.
Summary AID:
488970
Assigned AID:
493020, 504769, 504831, 588399
C. Secondary Assay 1: Screening for Inhibitors of Bacterial Capsule Biogenesis—E. coli Strain UT189 with C7 Control
Purpose:
This confirmatory cell-based assay provides an alternative measurement of inhibitory activity on phage-induced lysis. It measures reduction in bacterial capsule formation using an absorbance readout at A600 instead of the alamar Blue reagent.
Summary AID:
488970
Assigned AID:
504358, 504543, 504675, 504768, 588321, 588386, 588395
D. Secondary Assay 2: Screening for Inhibitors of Bacterial Capsule Biogenesis—T7 Lysis Inhibition
Purpose:
This secondary assay measures the compound mechanistic specificity for inhibition of bacterial capsule formation and excludes inhibitors of phage replication using a different bacteriophage (T7). In this assay, an increase in phage-induced lysis correlates to a decrease in capsule formation.
Summary AID:
488970
Assigned AID:
504349, 504538, 504676, 504767, 588322
E. Secondary Assay 3: Orcinol Secondary Screening for Inhibitors of Bacterial Capsule Biogenesis.
Purpose:
This assay was performed only on the probe candidate. This is an end-point assay to measure the amount of K1 bacterial cell capsule formation in the presence of a test compound. The ability of the test compounds to inhibit the K1 capsule formation was measured by a reduction in absorbance due to the complex formed by orcinol and the capsule polysaccharide. The biochemical determination of cell-surface associated capsule was performed using UTI89 or the Delta Region I and Delta Region II capsule mutant bacterial strains.
Summary AID:
488970
Assigned AID:
504733, 624060
F. Secondary Assay 4: K5 Secondary Screening for Inhibitors of Bacterial Capsule Biogenesis.
Purpose:
This assay was performed only on the probe candidate, and determined if compounds considered active in the T7 and orcinol secondary assays were able to also inhibit K5 capsule biogenesis. This assay was performed using a method identical to the T7 assay test with modification of only the test strain and bacteriophage used. In this validation test, we used E. coli strain DS17, a pyelonephritis clinical isolate expressing a K5 capsule. DS17 is highly susceptible to K5 phage mediated lysis. Thus, compounds that were active in the K1F phage assay and promoted lysis in the T7 phage assay were analyzed using this assay. The positive control drug C7 was used in this assay.
Summary AID:
488970
Assigned AID:
624061
Probe Chemical Characterization
2.2.1. Probe Chemical Structure and Properties
2.2.2. Structure Verification and Purity: 1H NMR, 13C NMR, RP HPLC/UV/HRMS Data
Proton and Carbon NMR Data for ML333/MLS004555969/SID 103147597/CID 18109210:
Detailed analytical methods and associated instrumentation are described in section 2.3, entitled “Probe Preparation”, under general experimental and analytical details. The numerical experimental proton and carbon NMR data are presented below.
Proton NMR Data for ML333/SID 103147597/CID 18109210:
1H NMR (400 MHz, DMSO) δ 10.76 (s, 1H), 9.60 (s, 1H), 8.12 (d, J=1.2 Hz, 1H), 8.51 (dd, J=1.2, 5.2 Hz, 2H), 8.25 (d, J=8.8 Hz, 1H), 8.12 (dd, J=1.6, 6.8 Hz, 1H), 7.81 (dd, J=1.2, 3.6 Hz, 2H) ppm.
Carbon NMR Data for ML333/SID 103147597/CID 18109210:
13C NMR (100 MHz, DMSO) δ 165.9, 159.6, 155.1, 150.3, 145.8, 133.7, 131.3, 125.9, 122.9, 113.9 ppm.
RP HPLC/UV/HRMS Data for ML333/SID 103147597/CID 18109210:
Detailed analytical methods and associated instrumentation are described in section 2.3, entitled “Probe Preparation”, under general experimental and analytical details. Purity assessment by RP HPLC/UV/HRMS at 214 nm for SID 103147597 (CID 18109210) revealed purity of 100.0% (retention time=2.287 minutes). The experimental RP HPLC/UV/HRMS spectra are included in Appendix 7. HRMS (m/z) calcd. for C13H9N3OS [M+H+] 256.0539. found 256.0543.
2.2.3. Aqueous Solubility:
Solubility was measured in phosphate buffered saline (PBS) at room temperature (23° C.). PBS by definition is 137 mM NaCl, 2.7 mM KCl, 10 mM sodium phosphate dibasic, 2 mM potassium phosphate monobasic and a pH of 7.4 (34). Probe ML333 (SID 103147597/CID 18109210) was found to have a solubility measurement of 104 μg/mL, or 407 μM, under these conditions. Solubility was also assessed in primary assay media (Luria-Bertani Broth). Probe ML333 was determined to have an assay media solubility of >126 μg/mL or >662 μM. The solubility in PBS buffer is good, and only slightly less than in assay media, and, in any case, the solubility for the probe is well above its activity in the K1 and T7 assays.
2.2.4. Aqueous Stability:
Aqueous stability for the probe was assessed using two solvent systems (100% aqueous PBS, and 50:50 aqueous PBS:acetonitrile). The probe stability was measured in aqueous PBS (no antioxidants or other protectants, DMSO concentration below 0.1%, room temperature) and the results are reported as circles in the graph in
2.2.5. Thiol Stability:
Compounds were dissolved at 10 μM in PBS at pH 7.4 (1% DMSO) and incubated at room temperature with either no thiol source as a negative control, 50 μM glutathione (GSH), or 50 μM dithiothreitol (DTT). The mixtures were sampled every hour for eight hours and analyzed by RP HPLC/UV/HRMS. The analytical RP HPLCUV/HRMS system utilized for the analysis was a Waters Acquity system with UV-detection and mass-detection (Waters LCT Premier). The analytical method conditions included a Waters Acquity HSS T3 C18 column (2.1×50 mm, 1.8 um) and elution with a linear gradient of 1% water to 100% CH3CN at 0.6 mL/min flow rate. Peaks on the 214 nm chromatographs were integrated using the Waters OpenLynx software. Absolute areas under the curve were compared at each time point to determine relative percent compound remaining. The masses of potential adducts were searched for in the final samples to determine if any detectable adduct formed. All samples were prepared in duplicate (
ML333 was found to be completely stable to the presence of five times its concentration of both glutathione and DTT thiol sources across all time points in our analysis (
2.2.6. Synthesis Route:
The probe compound ML333 and numerous analogues were synthesized using the reaction sequence shown in
2.2.7. Submission of Probe and Five Analogues to the MLSMR
Samples of the probe and five analogues were prepared, analytically characterized, and shipped to the MLSMR. The structures for the five supporting analogues are shown in
1Compound selected as negative control
2.3 Probe Preparation
General Experimental and Analytical Details:
All reagents were used as received from commercial suppliers. The 1H and 13C spectra were recorded on a Bruker Avance 400 MHz or 500 MHz spectrometer. Chemical shifts are reported in parts per million and were referenced to residual proton solvent signals. Flash column chromatography separations were performed using the Teledyne Isco CombiFlash RF using RediSep RF silica gel columns. TLC was performed on Analtech UNIPLATE silica gel GHLF plates (gypsum inorganic hard layer with fluorescence). TLC plates were developed using iodine vapor. RP HPLC/UV/HRMS analysis was carried out with gradient elution (5% CH3CN to 100% CH3CN) on an Agilent 1200 RRLC with a photodiode array UV detector and an Agilent 6224 TOF mass spectrometer (also used to produce high resolution mass spectra). Purification was carried out by mass directed fractionation with gradient elution (a narrow CH3CN gradient was chosen based on the retention time of the target from LCMS analysis of the crude sample) on an Agilent 1200 instrument with photodiode array detector, an Agilent 6120 quadrupole mass spectrometer, and a HTPAL LEAP autosampler. Fractions were triggered using a MS and UV threshold determined by RP HPLC/UVHRMS analysis of the crude sample. The conditions for RP HPLC analysis included the following: Waters BEH C-18, 1.7 μm, 2.1×50 mm column; 0.6 ml/min flow rate; and pH 9.8 NH4OH aqueous mobile phase. The conditions for purification included: Waters XBridge C18 5 μm, 19×150 mm column; 20 ml/min flow rate pH 9.8 NH4OH aqueous mobile phase.
The probe was prepared using the following protocols:
Step 1:
Benzo[d]thiazole-6-carboxylic acid (0.181 g, 1.012 mmol) was dissolved in 10 mL of dichloromethane in a round bottomed flask containing a stir bar. N,N-Dimethylformamide (7.40 mg, 0.101 mmol) was added to this stirring mixture, and then the mixture was cooled to 0° C. A solution of oxalyl chloride (0.193 g, 0.132 mL, 1.518 mmol) in 3 mL of dichloromethane was added dropwise. The reaction was allowed to slowly warm to room temperature and then to further mix for one hour. The reaction was concentrated in vacuo to remove solvent and excess oxalyl chloride, while not heating over 30° C. This crude mixture was then redissolved in 2 mL of dichloromethane and added dropwise to a solution of pyridin-4-amine (0.095 g, 1.012 mmol), triethylamine (0.358 g, 0.494 mL, 3.54 mmol) in dichloromethane (2 mL) that had been previously placed in Mettler-Toledo Bohdan Miniblock™ reaction tube (Mettler-Toledo Autochem Reaction tubes 10.0 mi Part #1352118) (Note: 6×4 Miniblock™ setups were used to generate 24 different products per block in parallel). After the addition, the septum layer and cover plate were secured onto the Miniblock™ with spring clamps. The block was then secured onto a Bohdan Miniblock™ Compact Shaking and Washing Station, in which the shaker was set at 600 rpm for 16 hours. The Miniblock™ was then removed from the shaker, followed by a subsequent draining of the reaction mixture into a second Miniblock™ containing a Biotage ISOLUTE® SPE Accessories Phase Separator Tube (Part #120-1905-CG), containing water (3 mL). A cover plate was placed on the second Miniblock™ containing the reaction mixture, and then the Miniblock™ was placed on the shaker and was allowed to shake for five minutes at 600 rpm. After removal of the Miniblock™ from the shaker, the organic phase was allowed to drain into a sample collection tube. Sample was concentrated in vacuo in a GeneVac HT-4X centrifugal evaporator and then purified via automated preparative reverse-phase HPLC purification (Method listed below) to give N-(pyridin-4-yl)benzo[d]thiazole-6-carboxamide (0.228 g, 88% yield).
3 Results
3.1 Summary of Screening Results
Primary Assay:
An end-point assay to measure the amount of K1 phage-induced bacterial cell lysis was employed to determine the compound effect on capsule biogenesis. K1 bacteriophage specifically binds the bacterial capsule during the initial stages of infection. Bacteria without capsule cannot be infected and lysed by the bacteriophage. The ability of the test compounds to inhibit the K1 capsule formation was measured by an increase in the fluorescence of alamar Blue, which correlated with the amount of intact bacterial cells compared to control reaction wells Inhibition of phage-induced lysis indicated an active compound in the primary screen. A total of 338,740 compounds were screened at 100 μM in the primary screen. Inhibition of phage lysis was calculated relative to the mean of the bacterial (positive) control on each microtiter plate. Primary screen average Z values=0.75; average signal to background (S/B)=11; and average coefficient of variance=4.6%. For calculation of S/B/Z value, and CV, the following formulae (in which SD stands for standard deviation) were used: S/B=mean signal/mean background; Z=1-3 SD of sample+3 SD of control mean of sample−mean of control; % CV=(SD mean signal/mean signal)×100.
Confirmatory efficacy: The background cutoff (15% inhibition) for the primary screen was calculated using the mean of all compound results plus 3×SD. Compounds that inhibited more than 30% (1,767) were considered for evaluation by confirmatory dose response and cytotoxicity counter screening assays. Only 1,219 compounds were available for confirmatory assays. The confirmatory efficacy assay was performed as described for the primary screen except that each compound was tested at 10 concentration points starting from 300 μM and continuing to lower concentrations by serial 2-fold dilutions to 0.69 μM. Twenty-six compounds were confirmed as effective at inhibiting the formation of capsule at compound concentrations below 50 μM. Confirmatory screen average Z values=0.79; average signal to background (S/B)=32; and average coefficient of variance=6.4%. IC50 values were calculated using a 4 parameter Levenburg-Marquardt algorithm, with the maximum and minimum locked at 0 and 100 respectively.
Cytotoxicity Assay:
The cytotoxicity assay was performed as described in Section 6: Appendix. Hit cytotoxicity and the 50% toxic concentration (CC50) was determined and compared to the IC50 to calculate the selectivity index. Twenty-nine compounds were tested, and 11 were inactive (CC50>50 μM).
Outcome:
3.2 Dose Response Curves for Probe
The primary assay (Summary AID: 488970) and counterscreen methods (AID: 493020); were used to measure both probe efficacy and cytotoxicity. The probe ML333 potency in the primary phase lysis inhibition assay was determined: IC50=1.04±0.13 μM μM, and the CC50 239±89 μM. The calculated selectivity was determined as (CC50/IC50)=230. The ML333 dose response profiles for efficacy and cytotoxicity curves are graphed below (
3.3 Scaffold/Moiety Chemical Liabilities
The probe compound and analogues appears to be stable based on our observations from day-to-day handling related to their synthesis, analysis, dissolution-transfer, lyophilization, and storage. The probe compound and analogues do not contain moieties that are known or expected to be reactive. The probe was found to be stable in aqueous solution and in the presence of thiol (please see sections 2.2.4 and 2.2.5).
3.4 SAR Tables
The HTS of 338,740 compounds at 100 μM concentration in the primary screen (AID 488966) resulted in a number of validated compound hits. One of the compound hit chemotypes the team chose to explore further resided in a cluster of nine compounds, in which one, Table 3.4.1, entry 1, exhibited 53% inhibition at 100 μM concentration. Related compounds in this chemotype, Table 3.4.1, entries 2-9 were found to be inactive at 100 μM.
1N/A = not active
Considering the limited SAR information available for this chemotype, for the initial SAR exploration, the team chose to focus on varying the benzothiazole, amide, and pyridyl sub-structural components of the chemotype, as shown schematically in
In particular, in a combinatorial fashion, the benzothiazole moiety was replaced using the quinolone, indole, and benzimidazole ring systems, while the 4-pyridyl moiety was replaced using p-methylphenyl, p-trifluoromethyl-phenyl, p-methoxyphenyl, 2-pyridyl, 3-pyridyl, o-fluorophenyl, m-fluorophenyl, p-fluorophenyl, p-chlorophenyl, p-bromophenyl, p-acetylphenyl, and furan-2-yl-methyl moieties. Each compound was screened to determine IC50 values in the K1 phage, human bladder cell cytotoxicity, and T7 phage assays. To our surprise, only one of the 49 analogues synthesized (Table 3.4.2., entry 42) showed any hint of activity.
Since none of the more significant structural modifications studied in the first round of SAR exploration resulted in active compounds, the team decided that the second round of compounds for SAR study should consist of only slightly modified analogues (Table 3.4.3). Specifically, the pyridyl moiety was substituted to give 2-bromopyridyl, 2,6-dichloropyridyl, 2-methoxypyridyl, 2-chloropyridyl, 2-hydroxypyridyl, 2-fluoropyridyl, and 3-fluoropyridyl analogues. To explore the SAR around the amide bond, we included the N-methyl analogue (entry 1), the reverse amide (entry 7), as well as amide-cyclized oxazolo[4,5-b]pyridyl and oxazolo[5,4-c]pyridine analogues (entries 8 and 9). Each compound was screened to determine IC50 values in the K1 phage, human bladder cell cytotoxicity, and T7 phage assays. Entries 2, 5, 6, and 12 of Table 3.4.3 all exhibited activity within the range of our desired probe criteria, showing that mono-halogenation and methoxy substitutions on the pyridyl moiety were tolerated. However, N-methylation of the amide bond, reversal of the amide bond, di-substitution on the pyridyl ring, hydroxyl substitution of the pyridyl ring or cyclization through the amide bond onto the pyridyl ring were not tolerated. Replacing the pyridyl group in the molecule with a phenyl group (entry 16) reduced activity significantly.
R
The third round of SAR study focused on very specific modifications to the pyridyl portion of the hit compound. Saturated, homologated, and dihomologated analogues were prepared. The parent carboxylic acid, benzothiazole-6-carboxylic acid, was also tested. Each compound was screened to determine IC50 values in the K1 phage, human bladder cell cytotoxicity, and T7 phage assays. None of these analogues showed biological activity.
R
For the final round of SAR study, the team explored combining the most promising substitutions discovered from our studies on the pyridyl ring with substitutions on the, as yet, unexplored 2-position of the benzothiazole ring (Table 3.4.5, entries 1-32). At this stage of the project, compounds were screened for activity in the T7 phage assay (and were not screened using the K1 phage assay) and for cytotoxicity against human bladder cell carcinoma 5637 cells. This final round of SAR resulted in some of the most potent and selective analogues prepared, to date, entries 13 and 17. In the case of entry 13, methyl-group substitution adjacent to the nitrogen atom of the pyridine ring and introduction of a Boc-protected-amine at the 2-position of the benzothiazole provided a compound with an IC50 of 490 nM in the T7 phage assay and a selectivity index of nearly 200. In addition, methyl-group (entries 10 and 11) and amine-group (entry 23) substitution was shown to be tolerated at the 2-position of the benzothiazole.
R1 R2
Probe Selection:
Several compounds generated during these studies met the criteria established at the outset of the project for a useful probe compound (see Section 2, Pages 7 and 8 of this report). Early in the project, however, ML333 was found to have good activity across the suite of assays used to define the probe criteria and in a suite of in vitro PK assays. In addition, in PubChem, the probe ML333 is reported to have shown activity in only 3 (distinct) of 379 bioassays in which it was tested (<1% hit rate), which suggests that ML333 is not a promiscuous hitter. In as much, this compound was nominated as the probe candidate and used for advanced, preliminary studies such as those described in sections 4.2 and 4.3. In any case, as was mentioned previously, quite a number of useful compounds were identified across the ML333 chemotype, and, depending on the specific intended use for these compounds, many of them could have been chosen as probes (for example, CID 53484225, entry 2, Table 3.4.3; CID 53484232, entry 5, Table 3.4.3; CID 53484228, entry 6, Table 3.4.3; CID 126587005, entry 12, Table 3.4.3; CID 57412031, entry 13, Table 3.4.5; and CID 57412040, entry 17, Table 3.4.5).
3.5 Cellular Activity
ML333 was identified using a phenotypic bacterial cell-based assay that determined the amount of bacterial capsule formation in the presence of the probe compound. No biochemical assays were used for determination of compound biological activity. Additional cell-based assays were performed to determine probe specificity. Also, a counterassay was performed to determine eukaryotic cytoxicity using human bladder cell carcinoma 5637 cells, which are considered the physiologically-relevant target cell type. The compound was shown to have no effect on bacterial cell viability in the highest tested concentration (300 μM), and the eukaryotic 50% cytotoxic concentration (CC50) was 239±89 μM, which determined a calculated selective index of 230. Although the primary and secondary assays were performed using bacterial cultures, it is recognized that probe will be used in in vitro eukaryotic and in vivo assay systems. Because of this, each synthesized probe and analogs were routinely tested using the cytotoxicity counterassay.
3.6 Profiling Assays
In Vitro Pharmacokinetics Profiling:
The in vitro pharmacokinetic (PK) properties of the probe (ML333) were profiled using a standard panel of assays (Table 3.6.2) across which the probe displayed encouraging results.
ain 1x PBS, pH 7.4
bin Luria-Bertani broth (10 g tryptone, 5 g yeast extract, 10 g NaCl)
cin aqueous buffer (pION),; Donor compartment pH 5.0/6.2/7.4; Acceptor compartment pH 7.4 @ RT
d% remaining at 3 hr @ 37° C.
e% remaining at 1 hr @ 37° C.
ftowards Fa2N-4 immortalized human hepatocytes
Broad-Spectrum Target Profiling:
The probe compound ML333 was submitted to Ricerca for LeadProfiling to assess off-target pharmacology. The probe was tested in duplicate at 10 □M concentration and significant activity was noted for only one target across the panel of 67 targets (i.e., norepinephrine transporter, 58% inhibition, see Appendix 9 for the complete list of results). In addition, in PubChem, the probe ML333 is reported to have shown activity in only 3 (distinct) of 379 (<1%) bioassays in which it was tested. These results suggest that ML333 is not a promiscuous compound with respect to off-target effects.
4 Discussion
Traditional anti-infectives for the treatment of UTI are almost exclusively directed toward inhibiting central metabolic and structural targets such as folate metabolism, protein synthesis, DNA replication machinery, and cell wall assembly. Traditional targets of inhibition are attractive because of the potential broad spectrum of inhibition of a variety of organisms. However, the lack of specificity then also means that microbes not involved in an infectious process and not intended as targets of the therapeutic are indiscriminately targeted. The major consequences are two-fold: 1) Normal flora are eliminated, resulting in side effects such as antibiotic-associated diarrhea and the emergence of pathogens such as Clostridium difficile, and 2) stress within microbial reservoirs such as the enteric tract drives the acquisition and emergence of antibiotic resistance. Furthermore, more traditional anti-infectives are not disease specific, and thus the multiplicity of their use for a variety of infection prevention and treatment increases the amount of human and agricultural exposure to these agents, further driving antibiotic resistance.
Targeting factors required by microbial pathogens almost exclusively during infection, so called anti-virulence therapeutics, is predicted to dramatically reduce chemical stress on commensal microbes and thus lessen the emergence of resistance. Furthermore, many infections may be cleared by inhibiting microbial factors that subvert the host immune response, thus allowing natural clearance of the infection and possibly enhancing immune memory of the infectious agent to allow the immune system to better recognize and clear subsequent infections. Since the vast majority of UTI occur in the community in other healthy individuals with competent immune systems, this strategy for novel anti-virulence agents is rationale and practical.
4.1 Comparison to Existing Art and how the New Probe is an Improvement
The probe described herein is entirely novel with the only precedent being the structurally dissimilar molecule 2-(4-phenylphenyl)benzo[g]quinoline-4-carboxylic acid that we previously described in proof-of-concept studies (33) and the previous MLPCN probe compound ML317. The probe described herein is uniquely poised for development as an infection-specific prevention and treatment therapeutic that enhances natural immune clearance of an infection, namely UTI. The highly soluble probe abrogates capsule development in several K type UPEC as demonstrated through capsule-specific phage assays and orcinol biochemical tests. However, the probe has no effect on in vitro growth and viability of UPEC in the absence of immune factors. Unlike with many traditional antibiotics, exposure of UPEC to a range of concentrations of the probe has not resulted in the emergence of spontaneous resistance in the laboratory, consistent with the concept that this probe does not induce stress and adaptive changes that confer resistance. Furthermore, this probe would be expected to act upon traditional antibiotic resistant strains of E. coli.
As previously outlined, 2-(4-phenylphenyl)-benzo[g]quinoline-4-carboxylic acid C7, was used as the prototype small-molecule inhibitor of capsule biogenesis, and, along with the MLPCN probe ML317, serves as the only prior art for this probe development project. Relative to C7, the probe discovered during this MLPCN project demonstrates improved potency in the K1 phage assay, a better selectivity index, similar performance in the orcinol screen, and greater than an order-of-magnitude lower IC50 value in the T7 phage assay. Furthermore, we have demonstrated the synthetic tractability for the ML333 chemotype, and prepared an array of highly active analogues, whereas C7 does not share either of positive these attributes. To further demonstrate the usefulness of ML333 as a probe, we have shown ML333 to have acceptable in vitro pharmacokinetic properties. Aqueous stability in 1×PBS at pH 7.4, aqueous stability in LB, both human and mouse hepatic microsomal stability, PAMPA permeability and both human and mouse stability were all found to be acceptable. In contrast, while C7 has not been screened in such in vitro PK assays, one might predict poor results based on its chemical structure and calculated physiochemical properties. For example, one would not imagine a compound such as C7 to have good solubility characteristics. Lastly, the many aryl rings of the C7 structure pose liabilities to oxidative metabolism that might render this compound less attractive compared to ML333. Compared to the previous MLPCN probe ML317, the current probe compound ML333, has a better selectivity index (BC5637 bladder cells TC50/K1 phage IC50), comparable aqueous solubility, permeability, and plasma stability (human and mouse), whereas the hepatic microsome stability is observed to be slightly less promising.
4.2 Mechanism of Action Studies
Moving forward, genetic and biochemical approaches are being employed to identify the mechanism of action. Currently, overexpression of a whole genome open reading frame library of E. coli is being used to identify gene products that enhance or reduce susceptibility to the probe. A number of plasmids expressing open reading frames have been selected in the screen and the identity and function of gene products are being analyzed. The target of the probe may be within a signal transduction pathway to capsule regulation but distinct from the actual transcription factor affecting capsule expression. Cellular localization of probe-interacting factors and biochemical studies of probe-target interactions will be explored.
Recent studies have also employed chemical mutagenesis to derive strains resistant to the action of the probe. Whole genome sequencing using Illumina Hiseq technology has been completed on five independent isolates. An analysis of polymorphisms shared among independent resistant bacterial clones will be used to localize putative factors that interact with the probes. These may be transporters or the actual target of the probe. The genes from the mutant and wild type strains will be cloned and expressed in the isogenic bacterial backgrounds to ascertain their roles in sensitivity to the probe.
4.3 Planned Future Studies
The probe will be optimized further for potency, selectivity, physiochemical properties, and in vitro pharmacokinetics (using the K1 phage, T7 phage, human bladder cell cytotoxicity, aqueous solubility, aqueous stability, plasma stability, plasma protein binding, log D, cell permeability, and microsomal stability assays). Based on the current SAR story, substitution at the positions R1, R2, and R3 will be explored, along with the introduction of nitrogen atoms at the positions X. for example.
Subsequently, in vivo pharmacokinetic measurements will be performed in a preclinical murine model with additional optimization of the probe for bioavailability and renal excretion. After completion of these studies and refinements to the probe, the refined probe will be employed in prophylaxis and treatment trials using preclinical murine infection models of E. coli urinary tract infection and bloodstream infection.
6.1 Detailed Assay Descriptions
6.1.a Screening for Inhibitors of Bacterial Capsule Biogenesis.
Purpose:
The primary screening was conducted to screen the MLSMR 300K compound library for selection of 1,767 hit compounds.
Summary AID:
488966
Assigned AID:
488970
Assay Description: Screening for Inhibitors of Bacterial Capsule Biogenesis.
Primary Assay:
The primary assay was conducted in the 1,536 well plate format. Bacterial cultures of E. coli K1 strain UTI89 (cystitis isolate) and isogenic capsule mutant strains (as controls for phage infection) were grown and prepared at the screening center immediately prior to use. Overnight starting cultures of UTI89 were grown at 37° C., and inoculated into 1 liter of LB (starting OD600˜0.03), which was sufficient for screening 40 plates (including ˜10% waste) and ˜40,000 compounds as single points.
Control wells contained UTI89 (wt K1) with 0.5% DMSO as a simulated positive control; UTI89 with 0.5% DMSO and tetracycline for a negative growth control; and media plus vehicle control. 50 mL of LB Broth was inoculated with stock 150 μL E. coli UT189 and grown overnight at 37° C. The next day, cultures were diluted 1:75 in 1 L of LB Broth containing 0.5% DMSO. 3 μL of this culture was added to each plate well, and plates were incubated, inverted, at 37° C. for 2 hr. The K1F bacteriophage stock was diluted 1:8 in LB Broth containing 0.5% DMSO, and 1.5 μL of diluted phage (or media only) was added to the pre-plated test compound wells and appropriate control wells. The plates were centrifuged briefly, and then were incubated, inverted, at 37° C. for an additional 2 hr. Afterward, alamar Blue reagent (Invitrogen, #DAL1100) was diluted 1:2 with LB broth and 1 μL was added to each plate well. The plates were again centrifuged briefly, and then were further incubated, inverted, at 37° C. for 30 min.
Single Dose Compound Preparation:
For single dose screening, compounds or carrier control (DMSO) were diluted to a final well concentration of 1:200 in assay media. Compounds (45 nL in 100% DMSO) were dispensed to assay plates using an Echo non-contact dispenser. Compounds from the libraries were added to the plates at a final concentration of 100 μM, before the addition of bacteria or phage. Each compound was tested as a single point, and ˜1200 compounds were tested per plate. The entire primary screening campaign was divided into eight batches, each screened in this manner
Control Drug:
The positive control drug C7 in 1% DMSO (2-(4-phenylphenyl)benzo[g]quinoline-4-carboxylic acid) that was previously identified in a pilot screen was not used in the primary screen due to aqueous insolubility. Tetracycline (50 μM) was used as a negative growth control drug.
Endpoint Read:
The plates were read at ambient temperature from the top for fluorescence intensity in an Envision plate reader (Perkin Elmer) by excitation at 560 nm and emission at 590 nm, and the degree of phage-mediated lysis was determined based on the metabolic processing of alamar Blue by live bacterial cells. A positive hit was defined by the compound producing greater than a 50% inhibition of phage-induced lysis.
Dose Response Compound Preparation:
Concentration Dependent Confirmatory and Cytotoxicity Assays.
Dose response testing (dose range=300-0.58 μM) was used to confirm and characterize the primary screen hits, which was necessary to determine the number of compounds advanced to secondary screens.
Efficacy:
Compounds were plated in 1536-well microplates, and the dose response efficacy assay was performed as described for the primary screen, with the exception that each compound was tested in duplicate at 10 concentration points starting from 300 μM and continuing to lower concentrations by 2-fold serial dilutions. The strain UTI89 delta-kpsM, a K1 capsule export mutant, was evaluated with the wt strain as a phage insensitive control (mimicking 100% capsule inhibition).
6.1.b Counterscreen: Cytotoxicity Screening for Potential Inhibitors of Bacterial Capsule Biogenesis.
Purpose:
This cell-based assay measures the cytotoxicity of compounds in bladder carcinoma 5637 cells using luminescent cell viability assay readout.
Summary AID:
488970
Assigned AID:
493020, 504769, 504831, 588399
Assay Description:
Cytotoxicity: Dose response testing (dose range=300-0.58 μM) established the hit cytotoxicity data. Compounds were plated in 384-well microplates in a stacked dose response format using the same doses used in the efficacy dose response. Bladder carcinoma 5637 cells were added to the compounds, and 72 hr later cell viability was measured using CellTiter Glo (38). Hit cytotoxicity and the 50% toxic concentration (TC50) was determined and compared to the IC50 to calculate the therapeutic index. Test compounds are serially diluted in a plate to plate matrix or stacked plate matrix. All 320 compounds in a source plate are diluted together resulting in a 10 point dose response dilution series. It is visualized as a serial dilution series proceeding vertically through a stack of plates with the high dose plate on top and the low dose plate on the bottom.
Control Drug:
Hyamine was used as a positive cytotoxic control. All wells contained 0.5% DMSO.
Preparation of Bladder Carcinoma 5637 Cells:
Cells are harvested and resuspended to 80,000 cells per ml in Complete DMEM/F12®.
Endpoint Read:
Following the three day incubation period, the assay plates were equilibrated to room temperature for 30 min and an equal volume (30 μL) of Cell Titer-Glo® reagent (Promega Inc.) is added to each well using a WellMate™ (Matrix, Hudson, N.H.) and plates are incubated for an additional 10 min at room temperature. At the end of the incubation, luminescence is measured using a Perkin Elmer Envision™ multi-label reader (PerkinElmer, Wellesley, Mass.) with an integration time of 0.1 s.
6.1.c Secondary Assay: Screening for Inhibitors of Bacterial Capsule Biogenesis E. coli Strain UT189
Purpose:
This confirmatory cell-based assay provides an alternative measurement of inhibitory activity on phage-induced lysis. It measures reduction in bacterial capsule formation using an absorbance readout at A600 instead of the alamar Blue reagent.
Summary AID:
488970
Assigned AID:
504358, 504543, 504675, 504768, 588321, 588386, 588395
Assay Set-Up:
This secondary assay was conducted in the 96 well plate format. Bacterial cultures of E. coli K1 strain UTI89 (cystitis isolate) and isogenic capsule mutant strains (as controls for phage infection) were grown and prepared at the screening center immediately prior to use. Overnight starting cultures of UTI89 were grown at 37° C., and diluted 1:100 into LB. Compounds were added to plates in a concentration dependent manner in the range of 100-0.39 μM, followed by addition of 100 μL of bacterial culture. Each concentration was tested in quadruplicate. 1% DMSO (final well concentration) was included. The plates were tape sealed and shaken vigorously for 1.5 hr. An initial OD600 reading at the time of infection was measured to identify compounds that cause growth retardation or bacterial killing in the absence of phage. Next, K1F phage (5 μL) was added to all of the test wells. The plates were resealed and shaken vigorously at 37° C., and measurements of OD600 for phage-mediated lysis were taken after 3 hr.
Endpoint Read:
The plates were read at ambient temperature from the bottom for absorbance at A600 in an Envision plate reader (Perkin Elmer) and the degree of phage-mediated lysis was determined based on the absorbance.
6.1.d Secondary Assay: Screening for Inhibitors of Bacterial Capsule Biogenesis—T7 Lysis Inhibition
Purpose:
This secondary assay measures the compound mechanistic specificity for inhibition of bacterial capsule formation using a different bacterial phage (T7). In this assay, an increase in phage-induced lysis correlates to a decrease in capsule formation.
Summary AID:
488970 Assigned AID: 504349, 504538, 504676, 504767, 588322
Assay Description: T7 Phage-Mediated Lysis Assay:
This assay determined if the mechanism of action of the compound is inhibition of phage infectivity or replication. The T7 phage has a nearly identical genome to K1F, without encoding an endosialidase. Its cycle of replication is similar to that of K1F as well. However, T7 entry into E. coli is inhibited by K capsules. This secondary assay was conducted in the 96 well plate format. Bacterial cultures of E. coli K1 strain UTI89 (cystitis isolate) and isogenic capsule mutant strains (as controls for phage infection) were grown and prepared immediately prior to use. Overnight starting cultures of UTI89 were grown at 37° C., and diluted 1:100 into LB. Compounds were added in quadruplicate to plates in a concentration dependent manner in the range of 100-0.39 μM, followed by addition of 100 μL of bacterial culture. 1% DMSO (final well concentration) was included. The plates were tape sealed and shaken vigorously for 1.5 hr. An initial OD600 reading was measured to identify compounds that cause growth retardation or bacterial killing in the absence of phage. Next, T7 phage (5 μL) was added to all of the test wells. The plates were resealed and shaken vigorously at 37° C., and measurements of OD600 for phage-mediated lysis were taken after 3 hr. True inhibitors of capsule yielded bacteria that were susceptible to T7 phage and lysed within 2 hr of the addition of phage. However, compounds inhibiting phage replication did not promote bacterial lysis. The positive control drug C7 (100 μM final well concentration) was used in this screen.
Endpoint Read:
The plates were read at ambient temperature from the bottom for absorbance at A600 in a BioTek Quantplate reader and the degree of phage-mediated lysis was determined based on the absorbance.
6.1.e Secondary Assay: Orcinol Secondary Screening for Inhibitors of Bacterial Capsule Biogenesis.
Purpose:
This assay was performed only on the probe candidate. This is an end-point assay to measure the amount of K1 bacterial cell capsule formation in the presence of a test compound concentration range. The ability of the test compounds to inhibit the K1 capsule formation was measured by a reduction of absorbance from the complex formed by orcinol and the capsule polysaccharide. The biochemical determination of cell-surface associated capsule was performed using UTI89 or the delta Region I and Region II capsule mutant bacterial strains.
Summary AID:
488970
Assigned AID:
504733, 624060
Assay Description:
The biochemical measurement of cell-surface associated capsule was performed. UTI89 or capsule mutants were grown in culture tubes with and without the test compound (50 μM). The cultures were centrifuged, and the cell pellets were washed in PBS and resuspended in Tris buffer, pH5. We have found that low pH releases surface polysaccharide without lysing the bacteria. Released polysaccharide was harvested by separation from whole bacteria by centrifugation followed by deproteination with phenol/chloroform and precipitation with ethanol. The precipitated material was subjected to acid hydrolysis (pH 2 at 80° C. for 1 hr) and incubated with orcinol, which reacts with periodic intermediates to produce a violet color quantified at OD 570 (3) Inhibitors reducing or abrogating surface encapsulation yielded low orcinol levels similar to the capsule export and synthesis mutants (Region I and II). The positive control drug C7 (100 μM final well concentration) was used in this screen.
Endpoint Read:
The samples were read at ambient temperature from the bottom for absorbance at A570 in a BioTek Quantplate reader and the degree of orcinol-reactive material was determined based on the absorbance compared to a wild-type encapsulated strain (UTI89) and a standard curve using purified sialic acid.
6.1.f Secondary Assay: K5 Secondary Screening for Inhibitors of Bacterial Capsule Biogenesis.
Purpose:
This assay was performed only on the probe, and determined if compounds considered active in the T7 and orcinol secondary assays were able to inhibit also inhibit K5 capsule biogenesis.
Summary AID:
488970
Assigned AID:
624061
Assay Description:
This assay was performed only on the probe candidate, and determined if compounds considered active in the T7 and orcinol secondary assays were able to also inhibit K5 capsule biogenesis. This assay was performed in a method identical to the T7 assay test, but a different bacterial test strain and bacteriophage are used. In this validation test, we used E. coli strain DS17, a pyelonephritis clinical isolate expressing a K5 capsule. DS17 is highly susceptible to K5 phage-mediated lysis. Thus, compounds that were active in the K1F phage assay but did not inhibit phage in the T7 phage assay were analyzed using this assay. This secondary assay was conducted in the 96 well plate format. Bacterial cultures of E. coli strain DS17 were grown and prepared immediately prior to use. Overnight starting cultures of DS17 were grown at 37° C. and diluted 1:100 in LB. Compounds were added to plates in quadruplicate at 50 and 100 μM, followed by addition of 100 μL of bacterial culture. 1% DMSO (final well concentration) was included. The plates were tape sealed and shaken vigorously for 1.5 hr. An initial OD600 reading was measured to identify compounds that cause growth retardation or bacterial killing in the absence of phage. Next, K5 bacteriophage (5 μL) was added to all of the test wells. The plates were resealed and shaken vigorously at 37° C., and measurements of OD600 for phage-mediated lysis were taken after 3 hr. True inhibitors of capsule yielded bacteria that were not susceptible to K5 bacteriophage and did not show lysis within 2 hr of the addition of phage. The positive control drug C7 (100 μM final well concentration) was used in this screen.
Endpoint Read:
The plates were read at ambient temperature from the bottom for absorbance at A600 in a BioTek Quantplate reader and the degree of inhibition of phage-mediated lysis was determined based on the absorbance.
Bacterial Strains, Phage, and Growth Conditions.
All E. coli strains and phage used in the present study are listed in Table 1. Unless otherwise indicated, bacteria were routinely grown at 37° C. in Luria-Bertani medium (LB) with shaking at 250 rpm. LB was supplemented with 1% dimethyl sulfoxide (DMSO; Acros) with or without compound. Phage lysates were prepared from 50 mL cultures of E. coli strains UTI89 (for K1F phage), MG1655 (for T7 phage) or DS17 (for K5 phage) and stored at 4° C. over several drops of chloroform as described [37].
Screen for Inhibitors of Bacterial Capsule Biogenesis.
Primary Assay.
The primary assay consisted of detection of the presence and absence of the K1 capsule on the E. coli urinary tract isolate UTI89 under growth conditions with compounds from a large chemical library. The assay was conducted as previously described [36] with the following modifications. The primary assay was conducted in 1,536-well plate format. UTI89 ΔkpsM, an isogenic K1 capsule export mutant, was included as an unencapsulated control. Tetracycline, 50 μM, was used as a negative growth control. A 1:75 dilution of overnight cultures were made in LB broth containing 0.5% DMSO, and 3 μL of this culture was added to each plate well, and plates were incubated, inverted, at 37° C. for 2 hr. K1F phage stock was diluted 1:8 in LB Broth containing 0.5% DMSO, and 1.5 μL of diluted phage (or media only) was added to the pre-plated test compound wells and appropriate control wells. The plates were centrifuged briefly, and then were incubated, inverted, at 37° C. for an additional 2 hr. To increase sensitivity of detection of viable bacteria, 1 μL of a 1:2 dilution of AlamarBlue reagent (Invitrogen, #DAL1100) in LB broth was added to each plate well. Alamar Blue, resazurin, is converted in living cells to the fluorescent molecule, resorufin. The plates were again centrifuged briefly, and then were further incubated, inverted, at 37° C. for 30 min. Resorufin fluorescence was measured using excitation of 560 nm and emission of 590 nm, as per the manufacturer's recommendations.
Compounds from the NIH Molecular Libraries Small Molecule Repository (MLSMR) were utilized in the primary assay. The MLSMR collection of over 300,000 compounds generically grouped into one of the following five categories: (a) specialty sets, comprising bioactive compounds such as known drugs and toxins, (b) non-commercial compounds, mainly from academic labs, (c) targeted libraries, (d) natural products, and (e) diversity compounds [38]. The MLSMR library covers a diverse sample of the chemical space occupied by drugs and natural products, but only narrowly represents combinatorial chemical space [39]. Compounds or vehicle control (DMSO) were diluted to a final well concentration of 1:200 in assay media. Compounds (22.5 nL in 100% DMSO) were dispensed to assay plates using an Echo non-contact dispenser (Labcyte). Compounds from the libraries were added to the plates at a final concentration of 50 μM, before the addition of bacteria or phage. Each compound was tested as a single point, and ˜1,200 compounds were tested per plate. A positive hit was defined by the compound producing greater than a 50% inhibition of K1F phage-induced lysis. Compound hits were further confirmed using an optical density-based detection method in a 96-well format as previously described [36].
Concentration-Response to Chemical Inhibition.
Concentration-response testing (concentration range=0.58-300 μM) was used to confirm and characterize the primary screen hits, which was necessary to determine the number of compounds advanced to secondary screens. Compounds were plated in 1536-well microplates, and the concentration-response efficacy assay was performed as described for the primary screen, with the exception that each compound was tested in duplicate at 10 concentration points starting from 300 μM and continuing to lower concentrations by 2-fold serial dilutions. The strain UTI89 ΔkpsM, a K1 capsule export mutant, was evaluated with the wild-type strain as a phage-insensitive control (mimicking 100% capsule inhibition).
T7 Phage Counter Assay.
This secondary assay was performed as previously described [36] and was used to distinguish compounds with phage inhibitory effects from true polysaccharide capsule inhibitors. T7 phage has a nearly identical genome to K1F phage and thus a similar life cycle [40]; however, T7 phage does not encode for an endosialidase, and its entry into E. coli is inhibited by K capsules. Thus, the presence of a capsule inhibits T7-mediated lysis [41]. In this assay, an increase in phage-induced lysis correlates to a decrease in capsule formation. True inhibitors of capsule yielded bacteria that were susceptible to T7 phage and lysed within 2 hr of the addition of phage. However, compounds inhibiting phage replication did not promote bacterial lysis. The positive control molecule C7 (100 μM final well concentration) was used in this screen.
Pan Assay Interference Compound (PAINS) Analysis.
Groups of compound substructural features are associated with compound biological promiscuity, and compounds containing these features arise as frequent hits in biochemical high throughput screens. These molecules have been described as PAINS [42]. To determine if molecules of interest were within chemical groups with known non-specific interference with the bioassays, the structures for compounds DU001, DU003, DU005, DU007, DU008, and DU011 were retrieved from PubChem and saved in the Structure Data Format (SDF). The structures were then compared to the SYBYL PAINS compounds library, to see which, if any, of the compounds contain PAINS functional groups [43].
Cytotoxicity.
Testing was performed essentially as previously described [36,44]. Concentration-response testing was performed over a range 0.58-300 μM in a 386 well plate format. Bladder carcinoma 5637 cells (ATCC HTB-9) were added to the compounds, and 72 hrs later cell viability was measured using CellTiter Glo (Promega). The 50% toxic concentration (TC50) was determined and compared to the IC50 to calculate the therapeutic index. Hyamine was used as a positive cytotoxic control. All wells contained 0.5% DMSO.
Evaluation of Off-Target Effects.
Off target effects of lead molecules of interest were evaluated using the LeadProfilingScreen commercial assay at Eurofins Panlabs (Bothell, Wash.). Reference standards were run as an integral part of each assay to ensure the validity of the results obtained. Assay results are presented as the percent inhibition of specific binding or activity (for n=2 replicates) for the probe compound tested at a concentration of 10 μM. Details regarding the individual assays and methods are provided in Supplementary Information File S1.
Orcinol Assay for Released Capsule Material.
Orcinol reactivity was used as a biochemical confirmation of altered extracellular capsule after compound treatment. UTI89 or an isogenic capsule mutant was grown in 100 μM of test compound or 1% DMSO. The assay was performed as previously described [36]. The molecule C7 (100 μM final concentration) was used as a positive control. The assay was performed 3 times with replicate samples.
K1 Antigen Dot Blot.
K1 antigen was detected by dot blot assays of culture extracts probed with anti-K1 H46 serum. The assay was performed as previously described [36]. The experiment was repeated twice with similar results, and a representative dot blot is shown.
Visualization of capsule using Alcian blue staining. Overnight cultures of clinical E. coli strains were diluted 1:100 in the presence of 1% DMSO or 100 μM DU011. Cultures were grown for ˜6 hrs (OD600=1.2) at 37° C. Samples were centrifuged at 13,200 RPM for 5 min. The medium was removed and the cells were resuspended in 500 μL of Tris-Acetate (pH 5) and shaken for 1 hr at 37° C. Samples were re-centrifuged, and the supernatant was concentrated ˜100 fold in Amicon 3K microconcentrators. The preparations were separated on a 7.5% SDS-PAGE gel and stained with 0.125% Alcian blue as previously described [45].
K5 Phage Assay.
This assay determined if compounds found to be active in the K1F, T7, orcinol, and K1 antigen dot blot secondary assays were able to also inhibit K5 capsule biogenesis. The assay was performed in a method identical to the T7 assay test [36]. E. coli strain DS17, a pyelonephritis clinical isolate expressing a K5 capsule and susceptible to K5 phage (K5), was used as a K5 prototypic test strain. The degree of inhibition of phage-mediated lysis was determined based on the absorbance (OD600).
Human Serum Sensitization by Capsule Inhibitor Treatment.
Overnight cultures of UTI89 were diluted 1:100 and grown with or without 50 μM compound for approximately 1.5 hrs on a shaker at 37° C. Then 25 μL of anonymous, non-identified, sterile filtered pooled human serum (purchased from Equitech Bio) was added per 100 μL of growth media. This was returned to the shaker for another 3 hrs, after which 20 μL of 5 mg/mL MTT (3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) was added. MTT is reduced to purple formazan by bacterial reductase enzymes, thus measuring viable bacteria. This was shaken for another 15 min at 37° C. The sample was spun to remove the growth media, followed by two washes with PBS. The formazan crystals were dissolved in 100 μL of DMSO and measured at OD570.
Murine UPEC Sepsis Model and Treatment with DU011.
Groups of five 6-7 week old C57BL/6NCr female mice (purchased from Frederick National Laboratory for Cancer Research) were injected subcutaneously twice daily with 100 μL of 1% DMSO (vehicle control) or DU011 (1 mg/ml) starting 12 hrs prior to the intra peritoneal infection. Weights were recorded twice daily to monitor health of the animals and tolerance to the compound. Mice were challenged by intraperitoneal injection with 108 CFU of the indicated E. coli UTI89 in 100 μL of PBS. Briefly, cultures were prepared by diluting overnight cultures (18 hrs) 1:100 into 3 mL of LB supplemented with 1% DMSO final or 100 μM DU011 (1% DMSO final). Shaken cultures were grown at 37° C. for 6 hours to an OD600 of 1.2, and then cells were pelleted and resuspended in 1 mL of PBS. Absorbance was adjusted to OD600 of 0.8 in PBS, and the cultures were then diluted 1:10 in sterile PBS. Animals were also given an intraperitoneal dose of 1% DMSO or DU011, in a site different than the administration of bacteria, to ensure sufficient systemic delivery of drug. Animal survival was assessed after 12 hours. Surviving mice were re-dosed according to the treatment groups and continued to be monitored. The experiment was concluded 48 hours post infection. The entire experiment was repeated with similar results.
Throughout each experiment, animals were monitored each 6 hours from the time of infection until conclusion for serious morbidity, including ruffled fur, decreased activity, slowed respirations, and ill appearance. Animals were provided gel packs for easily accessible additional hydration throughout the experiments. When a moribund state was suspected or anticipated by these criteria, animals were immediately euthanized to minimize potential pain and/or suffering. Of the total animals with an outcome categorized as death, the following numbers were euthanized for terminal morbidity prior to septic death (euthanized/total deaths): 3/10, no prior treatment; 3/5 prior chemical treatment of bacteria alone; 0/2 prior chemical treatment of mice alone. Euthanasia for all animals was through complete respiratory cessation using the inhaled anesthetic isoflurane followed by secondary assurance of death using bilateral thoracotomy. All animal experiments were conducted with prior approval from the Institutional Animal Care and Use Committee of Duke University.
Statistical Analyses.
Results were calculated as averages and standard deviations of the means using the Graph Pad Prism 5 software package (San Diego, Calif.). Nonparametric t-tests were used for statistical analysis of data and calculation of p-values using Graph Pad Prism 5 or Graph Pad online calculators. Significant differences are highlighted with a single asterisk when the p value is less than 0.05, with two asterisks when the p value is less than 0.01, and three asterisks when the p value is less than 0.001.
Results
Primary Screen for Novel Capsule Inhibitors.
Our initial screen of 2,195 compounds from the Developmental Therapeutics Program at the National Cancer Institute successfully identified a small-molecule inhibitor of uropathogenic E. coli Group 2 capsule biogenesis. We described this compound, termed C7, in a previous report as proof-of-principle that small-molecule inhibition of capsule biogenesis is possible and that these novel anti-infectives can block encapsulation and attenuate a pathogen through exposure to host innate immune factors [36]. Based on this proof-of-concept, the primary assay was adapted to a 1,536-well format with the modifications for high-throughput screening necessary to search for additional active molecules in significantly larger chemical repositories. The K1 encapsulated strain of uropathogenic E. coli UTI89 was grown in a 1,536-well plate format in the presence of 50 μM compounds. After an initial growth step, K1F phage specific for K1 capsule was added. Compounds with no effect on capsule biogenesis allowed the growth of organisms with an intact capsule that were subsequently lysed by the addition of the K1F phage. However, those compounds that presumably inhibited capsule biogenesis and allowed growth of the unencapsulated organism did not lyse with the addition of the K1F phage. These compounds were then selected for a secondary assay.
In total, 338,740 compounds were screened in the primary assay (using K1F phage), and 1,767 compounds associated with resistance to phage lysis (0.52% of total) were tested in concentration-response format. Of these, 29 compounds passed concentration-response validation (1.6% of compounds passing the primary screen), and 6 were selected after demonstrating high activity in the T7 phage secondary assay, the reciprocal phage assay in which chemical unencapsulation sensitizes a K1:K12 hybrid strain, EV36, to lysis by the T7 phage. Concentration response curves for 2 of these compounds are shown in
Identification of Potential Pan Assay Interference Compounds (PAINS) Among Capsule Inhibitor Hits.
A number of compound substructural features have been identified that are associated with compound biological promiscuity, and, in particular, compounds with certain structural features appear as frequent hits in biochemical high throughput screens. These molecules have been described as PAINS {Merging Citations}. Although PAINS may remain useful hits, we sought to prioritize the compound hits DU001, DU003, DU005, DU007, DU008, and DU011 by identifying and removing PANS-like molecules from our prioritization. Three of the six most active and selective compound hits, DU005, DU007, and DU008, are considered PAINS [40], and thus were not submitted for additional biological characterization.
Confirmation of Primary Hits and Spectrum of Activity.
Compounds were further characterized by determining biochemically the level of surface capsule upon compound treatment of a wild-type K1 encapsulated UPEC strain. We used mild-acid to release capsule from cultures of UTI89 grown in the presence of 100 μM compound. We then used the orcinol reagent to quantify the amount of released material. As shown in
As another independent measure of capsule inhibition by the DU compounds, K1 antigen was evaluated using whole-cell dot blots with anti-K1 serum. In all cases, treatment with these molecules reduced reactivity to levels resembling those of genetic capsule mutants (
A major consideration was whether the inhibitors of K1 encapsulation were also able to inhibit the production of other important E. coli Group 2 capsule types. To confirm the range of activity, we first demonstrated that treatment with each of confirmed inhibitory molecules also inhibited K5 phage infection of a K5 capsule-expressing strain, DS17 (
Chemical Inhibition Sensitized UPEC to Serum-Mediated Killing.
Capsule offers protection against serum-mediated killing. In order to test whether compound treatment of UPEC increased serum-mediated killing, an in vitro serum resistance assay was used. As shown in
DU003 & DU011 are Biologically Selective.
DU003 and DU011 were submitted to the Eurofins Panlabs LeadProfilingScreen to assess off-target pharmacology [42]. Both compounds were tested in duplicate at 10 μM concentration and showed no significant activity across the panel of 68 targets (i.e., <32% inhibition for DU011 and <30% inhibition for DU003, except for one target, the norepinephrine transporter, for which 58% inhibition was observed; full data and assays are provided in Supplementary Information File 51). In review of PubChem data, DU011 (CID23602075) is reported to have shown activity in only 21 of 467 (4.5%, as of Sep. 5, 2013) bioassays in which it was tested (assays unrelated to the current project). Per PubChem, DU003 (CID18109210) is reported to have shown activity in only 5 of 427 (1.2%, as of Sep. 5, 2013) bioassays in which it was tested (assays unrelated to the current project). Together, these results suggest that DU011 and DU003 are not biologically promiscuous compounds.
Attenuation of E. coli Disseminated Infection by DU011.
In order to test the ability of these compounds to prevent lethal systemic E. coli infection in mice, we selected DU011 for animal testing based on its favorable solubility, permeability, and plasma and microsome stability profiles (Table 3). As shown in
E. coli infections play a significant role in community-acquired UTI with substantial morbidity and associated costs. With a diminishing arsenal of antibiotics available for the treatment of UTI, new therapeutics are in great demand. Anti-virulence agents capable of specifically attenuating a pathogenic organism during its infectious cycle hold great potential as they may spare the microbiota in commensal niches.
Previous work in our lab and in others has highlighted the importance of capsular polysaccharides in the pathogenesis of uropathogenic E. coli [27-29]. Group 2 and 3 capsules are highly conserved and represent the predominant circulating capsule types [46]. We have previously described the identification and characterization of a novel agent designated C7 that is active (IC50 between 12.5-25 μM), blocks the production of K1 and K5 capsule biogenesis, and lacks obvious toxicity to cultured bladder epithelial cells [36]. We have since conducted a high-throughput screen for additional broad-spectrum capsule inhibitors, finding several structurally distinct and highly active new molecules with promising therapeutic characteristics.
Herein, we described the initial identification and characterization of these new small molecules. This group of capsule inhibitors features lower IC50 values and improved solubility, permeability, and plasma and microsome stability profiles. We have demonstrated their activity in assays with human serum (
It is to be understood that, while the invention has been described in conjunction with the detailed description, thereof, the foregoing description is intended to illustrate and not limit the scope of the invention. Other aspects, advantages, and modifications of the invention are within the scope of the claims set forth below. All publications, patents, and patent applications cited in this specification are herein incorporated by reference as if each individual publication or patent application were specifically and individually indicated to be incorporated by reference.
This application claims the benefit of US Appn. 61/835,112 filed Jun. 14, 2013, entitled “COMPOSITIONS AND METHODS FOR THE TREATMENT OF BACTERIAL INFECTIONS” which is hereby incorporated by reference in its entirety.
This invention was made with government support under Grant No. MH090791-02 awarded by the National Institutes of Health. The United States Government has certain rights in the invention.
Number | Name | Date | Kind |
---|---|---|---|
20070231406 | Bucalo et al. | Oct 2007 | A1 |
Number | Date | Country |
---|---|---|
2010029577 | Mar 2010 | WO |
2010029578 | Mar 2010 | WO |
WO2010029577 | Mar 2010 | WO |
Entry |
---|
PubChem—Document, dated Dec. 16, 2011. |
Ali. A. S., Townes, C. L., Hall, J., and Pickard, R. S. “Maintaining a sterile uninary tract—the role of antimicrobial peptides”. Jou of Urology 182:21-28 (2009). |
Anderson, G. G., et al. “Intracellular bacterial biofilm-like pods in urinary tract infections.” Science 301: 105-107. (2003). |
Anderson, G. G., et al. “Polysaccharide capsule and sialic acid-mediated regulation promote biofilm-like intracellular bacterial communities during cystitis,” Infect Immun 78: 963-975. (2010). |
Bahrani-Mougeot, F. K., et al. “Type I fimbriae and extracellular polysaccharides are preeminent uropathogenic Escherichia coli virulence determinants in the murine urinmy tract.” Molecular Microbology 45(4): 1079-1093. (2002). |
Foxman, B “The epidemiology of urinary tract infection.” Nature reviews Urology 7: 653-660(2010). |
Goller, C. C., and Seed, P. C. “High-throughput identification of chemical inhibitors of E. coli Group 2 capsule biogenesis as anti-virulence agents.” PLoS One 5, ell642.(2010). |
Gopinathan, S., Nouraldeen, A., Wilson, A.G.E . “Development and application of a highthroughput formulation screening strategy for oral administration in drug discovery,” Future Medicinal Chemistry 2: 1391-1398 (2010). |
Gupta, K., Hooton, T. M., and Stamm, W. E. “Isolation of fluoroquinolone-resistant rectal • Escherichia coli after treatment of acute uncomplicated cystitis,” J Antimicrob Chemother 56: 243-246. (2005). |
Gupta, K., Scholes, D., and Stamm, W. E. “Increasing prevalence of antimicrobial resistance among uropathogens causing acute uncomplicated cystitis in women,” JAMA 281: 736-738 (1999). |
Hames, L., and Rice, C. E. “Antimicrobial resistance of urinary tract isolates in acute uncomplicated cystitis among college-aged women: choosing a first-line therapy,” J Am Coll Health 56(2): 153-156.(2007). |
Hillier S, Roberts Z, et al. “Prior antibiotics and risk of antibiotic-resistant community-acquired urinary tract infection: a case-control study.” The Journal of Antimicrobial Chemotherapy 60: 92-99.(2007). |
Hultgren, S. J., et al. “Role of type 1 pili and effects of phase variation on lower urinary tract infections produced by Escherichia coli” Infection and Immunity 50(2): 370-377.(1985). |
Hultgren. S. J. “Uropathogenic Escherichia coli: interactions with bladder epithelium.” Urology 57: 105-106.(2001). |
Johnson, J. R. “Virulence factors in Escherichia coli urinary tract infection”, Clin Microbial Rev4, 80-128. (1991). |
Justice, S. S ., et al. “Filamentation by Escherichia coli subverts innate defenses during Urinary tract infection,” Proc Natl Acad Sci U S A 103(52): 19884-19889. (2006). |
Justice, S. S., “Maturation of intracellular Escherichia coli communities requires SurA,” Infect Inunun 74: 4793-4800. (2006). |
Kahlmeter, G. “The ECO.SENS Project: a prospective, multinational, multicentre epidemiological survey of the prevalence and antimicrobial susceptibility of urinary tract pathogens—interim report,” J Antimicrob Chemother 46 Suppl 1, 15-22 (2000). |
Karlowsky J. A., et al. “Fluoroquinolone-resistant urinary isolates of Escherichia coli from outpatients are frequently multidrug resistant: results from the North American Urinary Tract Infection Collaborative Alliance-Quinolone Resistance study,” Antimicrob Agents Chemother 50: 2251-2254. (2006). |
KSC-19-118; SID 103147597; Revision 1; Pubchem, Open Chemistry Database; 7 pages; available Dec. 16, 2011 (downloaded Jul. 29, 2016). |
Llobet E., et al. “Capsule polysaccharicle is a bacterial decoy for antimicrobial peptides,” Microbiology 154: 3877-3886. (2008). |
Manges, A. R., et al. “Widespread distribution of urinary tract infections caused by a multidmg-resistant Escherichia coli clonal group,” N Engl J Med 345: 1007-1011(2001). |
Martinez, J. J., et al..“Type I pilus-mediated bacterial invasion of bladder epithelial cells.” EMBO J 19: 2803-2812. (2000). |
Mulvey, MA et al. “Establishment of a persistent Escherichia coli reservoir during the acute phase of a bladder infection,” Infect Imnmn 69: 4572-4579 (2001). |
Mushtaq, N., Redpath, et al. “Treatment of experimental Escherichia . coli infection with recombinant bacteriophage-derived capsule depolymerase,” J Antimicrob Chemother 56: 160-165.(2005). |
Noah, J. W., et al. “A cell-based luminescence assay is effective for high-throughput screening of potential influenza antivirals.” Antiviral Res 73: 50-59. (2007). |
Olson, R. P., et al “Antibiotic resistance in urinary isolates of Escherichia coli from college women with urinary tract infections,” Antimicrob Agents Chemother 53, 1285-1286. (2009). |
Ploemen, J. H., et al. “Reversible conjugation of ethacrynic acid with glutathione and human glutathione S-transferase PI-1”, Cancer Res 54, 915-919. (1994). |
Roberts, I. S. “Bacterial polysaccharides in sickness and in health. The 1995 Fleming Lecture,” Microbiology 141 (Pt 9), 2023-203 L (1995). |
Roberts, I. S. “The biochemistry and genetics of capsular polysaccharide production in bacteria,” Annu Rev Microbiol 50, 285-315.(1996). |
Romagnoli, R., et al. “Synthesis and biological evaluation of 2-(3′,4′,5′-trimethoxybenzoyl)-3-amino 5-aryl thiophenes as a new class of tubulin inhibitors,” J Med Chem 49, 6425-6428.(2006). |
Rosen, D. A., et al. .“Detection of intracellular bacterial conummities in human urinmy tract infection,” PLoS Med 4(12), e329.(2007). |
Schappert, S. M. “National Ambulatory Medical Care Survey: 1991 summary,” Vital Health Statistics 13, 1-110.(1994). |
Smith PA and Romesberg FE. “Combating bacteria and drug resistance by inhibiting mechanisms of persistence and adaptation.” Nature chemical biology 3: 549-556.(2007). |
Spellberg B, Guidos R. et al. “The epidemic of antibiotic-resistant infections: a call to action for the medical community from the Infectious Diseases Society of America. Clinical infectious diseases”, an official publication of the Infectious Diseases Society of America 46: 155-164.(2008). |
Talan, D. A., et al.“Comparison of ciprofloxacin (7 days) and trimethoprim-sulfumethoxazole (14 days) for acute uncomplicated pyelonephritis pyelonephritis in women: a randomized Trial” JAMA 283(12): 1583-1590. (2000). |
Vimr, E. R., Aaronson, W., and Silver, R. P. “Genetic analysis of chromosomal mutations in the polysialic acid gene cluster of Escherichia coli K1.” J Bacterial 171(2): 1106-1117. (1989). |
Warren, J. W., et al. “Guidelines for antimicrobial treatment of uncomplicated acute bacterial cystitis and acute pyelonephritis in women.” Infectious Diseases Society of America (IDSA), Clin Infect Dis 29: 745-758.(1999). |
Wright, K.T., Seed, P. C., and Hultgren, S. J. “Development of intracellular bacterial communities of uropathogenic Escherichia coli depends on type 1 pili,” Cell Microbial 9, 2230-2241. (2007). |
Number | Date | Country | |
---|---|---|---|
20140371194 A1 | Dec 2014 | US |
Number | Date | Country | |
---|---|---|---|
61835112 | Jun 2013 | US |