The present disclosure relates to a TiO2-based monolithic composite photocatalyst that is useful for the mineralization of organic volatile organic compounds and gaseous organic compounds (e.g., ethylene) to CO2 and H2O. The monolithic composite photocatalysts may also be used to mineralize organic species in water. The monolithic composite photocatalysts are also useful as antimicrobial agents for airborne pathogens or microbe-contaminated surfaces, including plankton bacteria, bacterial spores, viruses, and fungal spores. These monolithic composite photocatalysts may also be used to photocatalyze chemical transformations. The disclosure additionally relates to the apparatus utilizing such monolithic composite photocatalysts for the mitigation of microbes, volatile organic materials and other environmental contamination, and the chemical transformation of different chemical reagents. It also relates to formulations for antimicrobial surface coatings utilizing said monolithic composite photocatalysts.
The prevalence of volatile organic chemicals (VOCs) in industrial, commercial, and residential areas plays a significant role in indoor air quality (IAQ) and the health and quality of life of the occupants working and living in these spaces. Various methods for improving IAQ and reducing these noxious species have been developed depending on the space of interest, with some environments requiring expensive ventilation and conditioned make-up air units and other areas employing smaller, cost-effective, portable solutions. One approach to removing VOCs from the air is through photocatalysis, a process that uses light to create electron-hole pairs in a semiconductor, which then interact at the surface to form reactive oxygen species (ROS), such as OH. and O2−, that degrade the target compounds, eventually producing CO2 and H2O in a process called mineralization. The wavelength of light to effect this reaction depends on the semiconductor of choice.
The need for clean drinking water cannot be overstated. Nearly 800 million people have limited or no access to clean, potable water. There are a wide variety of contaminants, including human and animal sourced pathogens (e.g., bacteria like E. coli and cholera and viruses like hepatovirus that causes hepatitis), heavy metals (e.g., arsenic), pharmaceuticals, and organic solvents. Each location may provide a unique combination of contaminants, so there is no “one size fits all” solution, but there are also many commonalities. Aside from the humanitarian aspect of this situation, the socio-economic costs include reduced productivity due to illness, increased burden on already strained health systems, and over-use of existing water supplies. The latter issue is beginning to impact even highly developed economies.
In addition to mineralizing VOCs, gaseous organic compounds, and organic species, photocatalysis may also be used as an antimicrobial approach. Society is faced with increasing threats from harmful microbes, including bacteria, viruses, spores and bacteria-comprised biofilms. Healthcare associated infections (HAIs) are a major problem that threaten life and increase costs of healthcare. The CDC estimates that in the U.S. there are 1.7 million hospital-associated infections annually, contributing to 99,000 deaths. In addition to airborne contamination, another primary transmission mode for these infections involves contact with contaminated surfaces, where bacteria and viruses can reside for days or even weeks on touch surfaces near the patient. Methicillin resistant Staphylococcus aureus (MRSA), Clostridium difficile (C. difficile), and other multiple drug resistant organisms (MDROs) are particularly dangerous and stubborn contagions that may reside on surfaces close to a patient. Many types are difficult to attack with antibiotics, and antibiotic resistance is spreading to Gram-negative bacteria that can infect people outside the hospital.
Outside the healthcare environment, there are a similar and increasing range of opportunistic mass-infections as evidenced by recent Norovirus outbreaks on cruise ships. These outbreaks may be spread by viruses, bacteria and spores that propagate both airborne and on surfaces.
It is well known that many standard disinfecting regimens (typically liquids comprised of bleach or hydrogen peroxide) may leave a residual contagion on a surface, which is known as “bioburden”. Bioburden comprises biofilm or planktonic species residing at a surface that is nominally ‘clean’. Its presence may be due to the failure of hospital staff to follow standard procedures; species with exceptional physical, chemical, and biological robustness; or a combination thereof. There are several disinfectant treatments that are receiving considerable attention as ways to augment liquid treatments. UV-C radiation, ozone, and disinfectant vapors or mists are known to be very effective but are highly hazardous and are only viable when a hospital room has been vacated.
Antimicrobial, or ‘self-sterilizing’, surfaces are highly desirable to complement standard cleaning. These surfaces act continuously, and ideally, they should have a high killing efficiency for a broad range of bacteria, viruses, and spores yet be non-toxic to humans.
Titanium dioxide (titania, TiO2) is the archetypal photocatalyst because of its highly oxidizing properties when irradiated with UV light, insolubility in water, low cost, and low toxicity, among other attributes. Photocatalysis using TiO2 has received interest for purifying fluids such as gases and liquids, in particular air and water, via oxidizing chemical reactions at its surface, and it has also been explored as a strategy for killing pathogens in fluids, including air and water, and on surfaces.
Photocatalysis is typically achieved by illumination with a low or medium pressure UV lamp, or in some cases a Xenon lamp, irradiating the front surface of a bulk ceramic- or powder-based titania surface, i.e., from the direction of the medium that is targeted to be purified. UV light-emitting diodes (LEDs) have also been employed, although these devices typically have very short product lifetimes and are unreliable. Photocatalysis utilizing titanium dioxide is typically excited by illumination in the UV or near UV 240-400 nm spectral region.
The chemical activation at the surface of a photocatalyst originates with the formation of electron-hole pairs that arise from optical stimulation. Activation at the surface typically has a finite lifetime that is limited by charge separation and recombination of electron-hole pairs. Mitigation of these effects has been investigated primarily via chemical modification of the titania particles, although there has been no consensus in technical approach for manufacturing practical photocatalyst materials and systems.
A wide variety of titania-based materials, doping schemes, and physical configurations have been proposed to enhance and utilize photocatalysis at TiO2 surfaces. Despite decades of research, low mineralization quantum yields, incomplete conversion of reactants, and catalyst fouling hinder widespread adoption of this technology for purification of air, liquids, and surfaces. The inventors of the present invention believe that several technical and economic factors have reduced the utility, effectiveness, and commercial viability of current photocatalytic air purification systems.
Much current research centers around the synthesis of TiO2 and its analogues as bulk powders, which comprise aggregates of nanometer-scale (>10 nm) particles. For example, a commercial TiO2, Evonik P-25, consists of approximately 30 nm TiO2 nanocrystals agglomerated into larger aggregates. Useful implementation of these powders into systems for purifying gases, liquids, and surfaces requires the support of these powders on macroscopic surfaces or the formation of these TiO2-based materials into macroscopic articles through, e.g., pelleting or extruding processes. Often processes used to support the catalyst result in the degradation in performance of the photocatalyst compared to bulk powder. These supported powders may also suffer from attrition, leading to a decrease in performance and an increased amount of loose residue that may cause blockages and pressure drops in systems over time. Similarly, bulk pelleting can lead to reduced performance because of the inability of light to be transmitted through to the interior of the article, reducing efficiency and adding cost by photocatalytically utilizing only a small layer on the surface of the pellet or extrudate.
Bulk TiO2-based powders are insoluble in water and other common solvents, and homogeneous dispersions rely on reducing the agglomerate size to aggregates that more readily suspend (not dissolve) in solvents. TiO2 nanocrystals synthesized with surface capping groups may be prepared and easily dispersed; however, as photocatalysis is a surface effect, the challenge is to achieve sufficient available reactive sites on the TiO2 nanocrystal surface for reactive oxygen species to be generated and to react with impurities in the fluid while remaining dispersed in the fluid or on a surface.
The monolithic composite photocatalysts of the present invention may be formed in a variety of configurations also identified in the present invention, thereby enabling a range of photocatalytic purification and antimicrobial surfaces and devices.
The monolithic composite photocatalysts of the present invention may also be used to catalyze certain chemical transformations that may be difficult to achieve with current catalyst schemes or may operate at reduced temperatures and/or pressures compared to current solutions.
TiO2 particles have been synthesized directly on the surface of solid supports and used for the degradation of organic compounds. TiO2 nanocrystals greater than 5 nm have been synthesized on the external surface of zeolites. TiO2 particles, 0.5-5 nm have been synthesized in the micropores of zeolites using citric acid. It was claimed that the TiO2 particles remain small because they reside in the micropores of the zeolite supports (micropores are defined as having a pore size less than 2 nm). TiO2 has been added to mesoporous Al2O3 at loadings up to 10% to improve crush strength and abrasion resistance with no discussion or claims of photocatalytic properties of the materials. Zeolite and mesoporous molecular sieves have been doped with transition metals and then combined with photocatalysts for visible light activation.
The subject invention may be embodied in the following examples that are by no means restrictive but are intended to illustrate the invention. It will be clear that the described invention is well adapted to achieve the purposes described above, as well as those inherent within. The citation of any publication is for its disclosure prior to the filing date and should not be construed as an admission that the present invention is not entitled to antedate such publication by virtue of prior invention. Numerous other changes may be made which will readily suggest themselves to those skilled in the art and which are encompassed both in the spirit of the disclosure above and the appended claims.
The present disclosure relates to a TiO2-based monolithic composite photocatalyst that is useful for the mineralization of organic volatile organic compounds and gaseous organic compounds (e.g., ethylene) to CO2 and H2O. The monolithic composite photocatalysts may also be used to mineralize organic species in water. The monolithic composite photocatalysts are also useful as antimicrobial agents for airborne pathogens or microbe-contaminated surfaces comprising plankton bacteria, bacterial spores, viruses, and fungal spores. These monolithic composite photocatalysts may also be used to photocatalyze chemical transformations.
In one aspect, the disclosure relates to a monolithic composite photocatalyst (
In another aspect, the disclosure relates to a monolithic composite photocatalyst comprising photoactive nanocrystals or particles and a non-photoactive porous support for the photoactive nanocrystals, said photoactive nanocrystals comprising titania or titania-based nanocrystals and an inorganic sensitizer, and said monolithic composite photocatalyst having the following characteristics. The monolithic composite photocatalyst of the present disclosure may have characteristics comprising those shown below:
In another aspect, the disclosure relates to a liquid or gas purification apparatus and/or antimicrobial system comprising a monolithic composite photocatalyst of the present disclosure, arranged for contacting the impurity stream under conditions that mineralize the impurities using said monolithic composite photocatalyst.
A further aspect of the disclosure relates to a liquid or gas apparatus comprising a monolithic composite photocatalyst of the present disclosure for effecting a chemical transformation using said monolithic composite photocatalyst.
A further aspect of the disclosure relates to a solution that may be deposited as a robust antimicrobial coating on a variety of surfaces comprising the monolithic composite photocatalyst of the present disclosure.
Other aspects, features and embodiments of the disclosure will be more fully apparent from the ensuing description and appended claims.
As used herein and in the appended claims, mineralization of an organic species means conversion of the organic species to CO2 and H2O. Mineralization of an organic species containing nitrogen, sulfur, halides, and the like will also generate, in addition to CO2 and H2O, small molecule compounds (e.g., mineral acids) related to these functional moieties.
As used herein and in the appended claims, fluid refers to a gas or liquid, including air and water.
As used herein and in the appended claims, monolithic composite photocatalyst refers to a titania-based photoactive component and a non-photoactive porous support that may comprise powders and macroscopic articles having monolith, block, brick, bar, disc, columnar, honeycomb, channeled block, fibrous wool, felt, fabric, sponge, mat, particulate, tablet, pellet, extrudate, and bead forms, and the like.
As used herein and in the appended claims, photoactive nanocrystals are the titania or titania-based component of the monolithic composite photocatalyst that when activated with light produce electron-hole pairs that generate reactive oxygen species.
As used herein and in the appended claims, non-photoactive porous support is a mesoporous catalyst carrier that does not generate electron-hole pairs when stimulated with UV or visible light. The photoactive nanocrystals are supported on the non-photoactive support.
As used herein and in the appended claims, photoactive nanocrystals refer to the titania, the titania-based, or the titania-inorganic-sensitizer nanocrystals present as discrete particles or small aggregates of the monolithic composite photocatalyst where at least 90% of these photoactive nanocrystals are smaller than 5 nm, as determined from transmission electron microscopy (TEM) imaging.
As used herein and in the appended claims, discrete photoactive nanocrystals refer to nanocrystals where at least 90% of the photoactive nanocrystals are individual particles less than 5 nm or small agglomerates of photoactive nanocrystals less than 5 nm, as determined from TEM imaging.
As used herein and in the appended claims, titania-based photoactive nanocrystals are photoactive nanocrystals comprising at least 75% titania. The balance can include lanthanide or transition metal dopants, noble metals, and/or non-metal dopants.
As used herein and in the appended claims, a sensitizer is a molecule or compound that may be activated with light to generate electrons and/or holes that interact with the titania in the monolithic composite photocatalyst to enhance mineralization efficiencies. In schemes where the sensitizer has a narrower bandgap than the titania, the sensitizer absorbs light at a longer wavelength, generating electrons and holes that are injected into the titania, improving the photocatalytic response at longer wavelengths of light.
As used herein and in the appended claims, monolithic composite photocatalyst N2 BET surface area is the value of surface area determined from BET (Brunauer Emmett Teller) analysis of N2 isotherms collected at 77 K.
As used herein and in the appended claims, mesopore size of the monolithic composite photocatalyst is determined from BJH (Barrett, Joyner, and Halenda) analysis or from the cylindrical pore, NLDFT (non-localized density functional theory) equilibrium model of N2 isotherms collected at 77 K.
As used herein and in the appended claims, microporous refers to a porous material with pore size smaller than 2 nm.
As used herein and in the appended claims, mesoporous refers to a porous material with pore size 2-50 nm.
As used herein and in the appended claims, photoactive nanocrystal or nanocrystal aggregate sizes refer to either the major axis or minor axis of an ellipsoid, where in general the dimensions of the photoactive nanocrystals of the subject invention are less than or equal to 5 nm.
As used herein and in the appended claims, photoactive nanocrystal loading refers to the mass of the photoactive nanocrystal component ratified to the mass of the entire monolithic composite photocatalyst, expressed as a percent.
As used herein and in the appended claims, the attrition is a measure of the particle size reduction of the monolithic composite photocatalyst when subjected to the test method described by ASTM D5757. “Standard Test Method for Determination of Attrition of FCC Catalysts by Air Jets,” Briefly, air of a known flow rate is passed through an orifice plate. The monolithic composite photocatalyst particles interact with the air stream and other monolithic composite photocatalyst particles. Collected fines are weighted periodically to determine the attrition rate (wt %/h).
As used herein and in the appended claims, substantially organic-free indicates <2% carbon residue detected via elemental analysis on monolithic composite photocatalysts.
As used herein and in the appended claims, matrix refers to the liquid system with which the monolithic composite photocatalyst is mixed for coating purposes.
The present disclosure relates to a monolithic composite photocatalyst that is useful for the mineralization of organic volatile organic compounds in air, organic gaseous compounds, and organic compounds in water to CO2 and H2O. The monolithic composite photocatalysts are also useful as antimicrobial agents for airborne pathogens. This disclosure also relates to methods for using these monolithic composite photocatalysts.
The monolithic composite photocatalyst of the present disclosure is useful for the mineralization of VOCs in single component and multicomponent air streams. It is also useful for the mineralization of ethylene and other gaseous organic compounds.
The porous network of the monolithic composite photocatalyst (
The monolithic composite photocatalyst may be in any appropriate form, including powders, micron-sized beads suitable for, e.g., fluidized beds, extrudates that may be specifically designed, e.g., for reducing pressure drop in fixed and moving beds or in ebullated beds; honeycombs for minimizing pressure drops; monolith, block, brick, bar, disc, columnar, channeled block, fibrous wool or material, felt, fabric, sponge, mat, particulate, tablet, or pellet forms, or planar films or membranes.
The monolithic composite photocatalyst of the present invention satisfies a number of rigorous criteria for use in mineralizing organic species. It relies on small (less than 5 nm), discrete photoactive nanocrystals; these photoactive nanocrystals are non-agglomerated on the support or present as small agglomerates (<5 nm). The photoactive nanocrystals are present on the external surface and throughout the internal mesoporous network of the support, which means the surface area of the selected support is utilized, creating numerous reactive photocatalytic sites. The size of these pores, greater than 2 nm, is critical for efficient and facile transport of VOCs and mineralized products to and from the photoactive nanocrystal surface, improving efficiency. Importantly, the photoactive nanocrystals that reside in these pores are prepared such that their size remains less than 5 nm, despite the large size of the mesopores (up to 50 nm). The photoactive nanocrystals are fixed and immobilized on the solid support so that they cannot become airborne. The surface of the photoactive nanocrystals is substantially organic-free and available for reaction. The photoactive nanocrystals may be used as-is for light activation with wavelengths shorter than 410 nm or modified to enable activation with light wavelengths longer than 410 nm or to improve conversion efficiencies at all wavelengths. The small photoactive nanocrystal size allows creation of the electron-hole pairs throughout the photoactive nanocrystal and facile migration to the photoactive nanocrystal surface over short distances to generate reactive oxygen species. Without wishing to be bound by theory, the resulting high efficiency of the monolithic composite photocatalyst stems from the size of the active non-agglomerated photoactive nanocrystals and small agglomerates of photoactive nanocrystals (less than 5 nm), which are distributed uniformly throughout the porous network of the non-photoactive porous support, maximizing surface sites available for the formation of reactive oxygen species that will mineralize the target materials while minimizing photoactive nanocrystal surface contamination from formed intermediates. It will be appreciated that the dominant activity of catalytic particles occurs at edges, corners, and interfaces; therefore, smaller catalytic particles are an advantage because there is a larger proportion of these features per unit volume compared to larger catalytic particles. The tunable porosity of the monolithic composite photocatalyst allows for the target contaminants to be adsorbed and transferred to free reactive sites on the photoactive nanocrystal surface for mineralization, an effective strategy for overcoming mass transfer limitations at low contaminant concentrations and increasing residence time of the impurity in the immediate environment of the photoactive nanocrystals. The attrition resistance of the composite material reduces the release of fines with time, which would impact the performance of the monolithic composite photocatalyst system. When measured on beads 800 microns or smaller, an attrition rate less than 3 wt %/h may be desired for specific photocatalytic fluid purification systems where the monolithic composite photocatalyst is in a moving, fluidized, or ebullated bed. The loading of the photoactive nanocrystals on the surface of the non-photoactive porous support improves light contact with the photoactive nanocrystals throughout the monolithic composite compared to homogenous photocatalytic particles of the same size as the support, and reduces cost while maintaining high performance. The non-photoactive porous support size and shape may be tailored for accommodation in a variety of system designs including, e.g., packed, moving, ebullated, and fluidized beds.
The monolithic composite photocatalyst may also include micropores. Without wishing to be bound by theory, it is expected that the micropores will adsorb organic molecules and gaseous organic species. These impurity species would then be transferred to the photoactive nanocrystals in the mesopores and on the surface of the monolithic composite photocatalyst as photocatalytic sites become available.
The non-photoactive porous support used to make the monolithic composite photocatalyst of the disclosure may be of any suitable type, including, for example, various metal oxides, mixed metal oxides, carbons, and combinations thereof. By way of example, the non-photoactive porous support can be zirconia, alumina, silica, silica-alumina, zeolites, aluminosilicate, silicalite, carbon or combinations thereof. The porous network of the non-photoactive porous support is important for providing the necessary surface area for supporting the photoactive nanocrystals and providing ample reactivity and pore size through which impurity species can freely migrate.
In one specific embodiment, the support is an alumina with pores of at least 2 nm, e.g., preferably from 4-45 nm, most preferably from 6-40 nm, as determined from BJH analysis or NLDFT analysis of N2 isotherm data collected at 77 K. It also has a N2 BET surface area of at least 10 m2/g, from 10-900 m2/g, preferably 20-800 m2/g, and more preferably 90-600 m2/g. It also has pore volume of 0.2-1.5 cc/g, more preferably 0.4-1.0 cc/g.
Monolithic composite photocatalysts may be prepared using impregnation techniques in which photoactive nanocrystal precursor solutions are added to the non-photoactive porous support. The intermediate is dried and then calcined to achieve the desired crystalline phase. Repeated impregnation-drying steps may be used to increase the amount of photoactive nanocrystal precursor on the solid support. Titania precursors useful for this impregnation synthesis include titanium ethoxide, titanium propoxide, titanium isoproproxide, titanium t-butoxide, titanium nitrate, titanium oxalate, ammonium titanyl oxalate, titanium sulfate, titanium oxysulfate, titanium citrate, and ammonium titanium (IV) bis(ammonium lactato) dihydroxide. Solvents for impregnation include water, ethanol, propanol, isopropanol, dilute sulfuric acid, dilute nitric acid, and combinations thereof.
Monolithic composite photocatalysts may also be prepared from surfactant-capped nanocrystals, dissolved in solvents including water, ethanol, propanol, and isopropanol, and impregnated into the pores of the non-photoactive porous support. TiO2 and titania-based photoactive nanocrystals may be prepared following a variety of wet chemical and solvothermal approaches. By varying reaction conditions including metal precursors, temperature, reaction time, solvents, and ligands, a variety of shapes (spheres, rods, bipyramids, etc.), crystalline phases, sizes, and solubilities can be achieved. Soluble, non-aggregated photoactive nanocrystals are attained by incorporating ligands that can coordinate to the surface of the nanocrystals during growth. These ligands prevent particles from aggregating, passivate surface defects, and allow for nanocrystal solubility in a variety of solvents. Dopant precursors may be added to the titania precursors in the initial stages of the reaction to facilitate their incorporation into the titania lattice. Ligands may be selected to facilitate the incorporation of the photoactive nanocrystals into the non-photoactive porous support and may include such materials as alkyl carboxylic acids and alkyl alcohols. A high-temperature calcination step may be used to remove the surface organics, leaving the monolithic composite photocatalyst substantially organic-free with less than 2% carbon residue by weight.
The properties of the monolithic composite photocatalysts of the present invention may be tailored to achieve high mineralization rates in the presence of varying amounts of relative humidity. The porosity properties of the monolithic composite photocatalyst, including surface area, pore size, and pore volume, along with its level of surface hydrophobicity may be tuned to optimize mineralization of the target chemical species under the environmental conditions of interest, including critical relative humidity and temperature ranges for, for example, storage of fresh fruits and vegetables.
A related aspect of the invention describes strategies to form the monolithic composite photocatalyst with optical absorption shifted to longer wavelengths (e.g., greater than 400 nm) to utilize visible light to stimulate the photocatalytic effect. The titania of the photoactive nanocrystals may be doped with rare earth oxides, (e.g., TiO2—CeO2 or any other lanthanide or combination thereof) (
A related aspect of the invention is to introduce heat to the photocatalyst in the photoreactor, to enhance thermally driven chemical reactions, which will complement the photocatalytically photon-driven chemical reactions. The introduction of heat is expected to increase the desorption rates of mineralization by-products and increase other desirable chemical reaction rates. Preferred temperatures are in the 50-150° C. range. Higher temperatures may be used transiently, for example for photocatalyst regeneration.
Inorganic sensitizers with narrower bandgaps than titania, including C3N4, Ag2O, Ag2CO3, ZnO, Cu2O, CuO, CdS, Bi2O3, may be coupled to titania to create a photoactive nanocrystal component that may be activated at wavelengths longer than 400 nm. The photosensitizer may also include other oxygen stoichiometries and suboxides of these compounds. Metal precursors of these inorganic sensitizers may be added during the synthesis of the photoactive titania nanocrystals on the non-photoactive porous support or they may be added following the synthesis of the monolithic composite photocatalyst. Heat treatments may be used to achieve the desired composition. Alternatively, surfactant-capped nanocrystals of these sensitizers may be prepared and impregnated in the monolithic composite photocatalyst. Heat treatments may be used to remove the organics, leaving the sensitizer-titania-based photoactive nanocrystals substantially organic-free. The sensitizer is present in the photoactive nanocrystal component at no more than 25 mole % relative to the titania, preferably no more than 15 mole % relative to the titania, and more preferably no more than 10 mole % relative to the titania. Multiple inorganic sensitizers may be used with titania to optimize the photoactivity at the desired activation wavelength.
Organic sensitizers, including porphyrins or dyes such as methylene blue, eosin Y, or rhodamine B, may also be added to enhance the visible light activity.
The monolithic composite photocatalyst, in various embodiments of the disclosure, may have characteristics comprising those shown below
The monolithic composite photocatalyst may be of widely varying types, consistent with characteristics such as those described above. In specific embodiments, the photoactive nanocrystals may be present in 1-25%, preferably 5-22%, more preferably 10-20% loading by mass. The form factor may be varied in both shape and size depending on the application. As an example, monolith, block, brick, bar, disc, columnar, honeycomb, channeled blocks, fibrous wool, felt, fabric, sponge, mat, particulate, tablet, pellet, extrudate, or bead forms may be used as the non-photoactive porous support with size ranging from microns to millimeters. These non-photoactive porous support properties are defined by the system configuration and can be used in packed beds, moving beds, ebullated beds, fluidized beds. The monolithic composite photocatalyst may also be a powder, either directly prepared as a powder monolithic composite photocatalyst or ground from larger articles and then deposited, either mixed with another material to form a matrix or deposited directly as the monolithic composite photocatalyst on a surface. The non-photoactive porous support may be chosen to impart unique properties to the overall monolithic composite photocatalyst, including attrition resistance and crush strength resistance, creating a multifunctional material.
The photoactive nanocrystals of the monolithic composite photocatalyst exist as small, discrete photoactive nanocrystals or photoactive nanocrystal aggregates adhered to the internal and external surface of the non-photoactive porous support. Greater than 90% of the discrete photoactive nanocrystals are less than 5 nm, as determined by TEM analysis (
For titania particles in this size regime, smaller than 5 nm in size, the bulk bandgap shifts to higher energy as the particle size decreases. The optical transmission of the titania photoactive nanocrystals of the monolithic composite photocatalyst, referenced to the non-photoactive porous support, is shown in
It is known that the anatase phase of titania plays an important role for efficient photocatalytic behavior in titania bulk photocatalysts. Raman spectroscopy and x-ray diffraction are common analytical approaches for evaluating the phase of titania, and Raman, particularly, provides an accurate assignment of the titania phase in the monolithic composite photocatalysts (
Another aspect of the invention is the regeneration of the monolithic composite photocatalysts. Photocatalyst fouling may occur through a number of pathways, including the adsorption of incompletely mineralized by-products onto the monolithic composite photocatalyst. Monolithic composite photocatalysts may be regenerated for re-use by irradiating the monolithic composite photocatalyst in the presence of a humidified air stream. Alternatively, heat treatments may be used to drive off the adsorbed species. Monolithic composite photocatalyst surfaces may be re-primed with hydroxyl groups using wet etching techniques, including peroxide, acid, or base treatments.
A related aspect of the invention is the application of these monolithic composite photocatalysts for water purification. Unlike bulk photocatalysts that exists primarily as powders and suffer severe attrition when supported on a substrate, the monolithic composite photocatalysts are resistant to attrition and can exist in a variety of bead or monolithic forms, allowing for easy, clean, and facile removal from the purified water.
A related aspect of the invention is the application of these monolithic composite photocatalysts to achieve chemical transformations typically achieved with traditional thermal catalysts at high pressures and high temperatures. The use of the monolithic composite photocatalysts described in this disclosure will promote these transformations at lower temperatures and/or lower pressures than typically employed. The properties of the monolithic composite photocatalyst and the reaction conditions employed may be tailored to achieve the desired product in high yield with high selectivity. Reaction conditions can include light alone or in combination with heat and or/pressure to achieve the desired outcome. Reaction rates may be optimized for a variety of environmental conditions, including moderate to high humidity environments (>40% relative humidity), by tuning the surface properties (for example, surface hydrophobicity) and/or porosity characteristics of the monolithic composite photocatalyst. Examples of transformations catalyzed with the monolithic composite photocatalysts described herein include CO2 to methanol and/or methane, oxidation of hydrocarbons and alcohols, epoxidation of alkenes, hydroxylation of aromatics, hydrogenation, conversion of NO to N2 and O2, and C—H activation reactions, particularly for light hydrocarbons.
A related aspect of the invention is the fabrication of photocatalytic surfaces by incorporation of the subject monolithic composite photocatalyst, a powder, into a liquid organic or inorganic matrix material. The monolithic composite photocatalyst may also be dispersed into a powdered organic or inorganic matrix material, or mixtures of organic and inorganic matrix materials that are then applied to substrates and cured to form a robust mixture of the monolithic composite and matrix as a coating.
The monolithic composite photocatalyst of the present disclosure satisfies a number of rigorous criteria for use in killing pathogens on surfaces. It relies on small (less than 5 nm size), non-agglomerated or small agglomerate (less than 5 nm size) TiO2 or TiO2-based photoactive nanocrystals. The photoactive nanocrystals are immobilized on a non-photoactive porous support so that they cannot become airborne. The photoactive nanocrystals may be used as-is for light activation with wavelengths shorter than 410 nm or modified to enable activation with light wavelengths longer than 410 nm or improved conversion efficiencies at all wavelengths, such as with inorganic sensitizers. Without wishing to be bound by theory, the resulting high efficiency of the monolithic composite photocatalyst stems from the size of the photoactive nanocrystals (less than 5 nm), which are present as non-agglomerated particles or small agglomerates (less than 5 nm) and distributed uniformly throughout the surface of the powder, maximizing sites available for the formation of reactive oxygen species that will kill the target pathogens. The homogeneity of the photoactive nanocrystals throughout the support reduces the likelihood of agglomeration of photoactive nanocrystals on the surface. Once incorporated into the matrix material, the photoactive nanocrystal particles will be in limited contact with the coating and will most often be surrounded by the non-photoactive porous support material, reducing the chance for decomposition of the coating with time and extending the lifetime of the coating. The properties of the non-photoactive porous support may be selected to impart important characteristics to the coatings, including hardness and strength.
The matrix may be either inorganic- or organic-based. Examples of inorganic matrix materials are silica, alumina, or titania film materials. Organic matrix materials may be rigid materials such as rigid epoxies, polyurethanes, polycarbonates, polypropylenes, polyesters, epoxy modified polyesters, thermoplastics (e.g., nylon, PET), or pliable materials such as silicones or flexible epoxies. Organic matrix materials may also comprise combinations of these constituent materials. These matrix materials may be deposited as thin coatings through, e.g., spray coating, spin coating, powder coating, dip coating, drop coating, and roll-to-roll printing. The matrix/monolithic composite photocatalyst may also be prepared as 3D-printed articles such as doorknobs, touch screens, light switches, and the like.
Alternatively, the monolithic composite photocatalyst may be deposited directly on a support such as, e.g., a glass with a low melting temperature, as small particles or powders and heated to adhere the particles to the support. The geometry of the support may be varied and can include planar substrates, rods, cylinders, fibers, helical elements, and the like. The monolithic composite photocatalyst may also be deposited directly on a coated support such that the monolithic composite photocatalyst forms the top layer of the coating and is adhered firmly to the underlying coating.
Mixtures of the monolithic composite photocatalyst with dry organic and inorganic materials may be applied to substrates using powder coating techniques. Examples of inorganic matrix materials are silica, alumina, titania, silicon carbide, other carbides, nitrides and pigment materials. Organic matrix materials may be rigid materials such as rigid epoxies, polyurethanes, polycarbonates, polypropylenes, polyesters, epoxy modified polyesters, thermoplastics (e.g., nylon, PET), or pliable materials such as silicones or flexible epoxies. Organic matrix materials may also comprise combinations of these constituent materials. Powder coating may be carried out by electrostatically charging the particles and spraying them onto a grounded conductive substrate, e.g., steel, aluminum, and the like. In cases where the substrate is non-conductive, a conductive undercoat may be used to attract the electrostatically charged particles. After spraying, the coating may be cured at elevated temperature between 150-300° C., preferably between 200-250° C., to create a robust layer that resists wear.
The monolithic composite photocatalyst loading levels within the matrix material may be varied to achieve optimum performance (0.1-40 wt %). Once deposited, the photocatalyst surfaces may be activated with wet-etchants, including peroxide, to enhance the surface hydroxyl groups necessary for forming the reactive oxygen species critical for photocatalysis. These etchants may be applied during routine cleaning/wipe-down cycles as an approach for reinvigorating and optimizing the photocatalysis efficiency. The surfaces may also be wiped down with traditional cleaning products.
One embodiment involves the deposition of monolithic-composite-photocatalyst-containing matrix materials onto hard surfaces, including those found in hospital rooms and operating rooms as well as on instrumentation, which includes surgical instruments, catheters, and other non-implantable items that have the potential to carry bacteria and viruses. Monolithic composite photocatalysts with suitable inorganic or organic matrix materials, including sol-gel, spin-on-glass, siloxanes, polyurethanes, and other appropriate materials, may be deposited onto these substrates using a variety of techniques, including spray-coating, printing, powder coating, spin-coating, dip-coating, additive manufacturing (i.e., 3D printing), extrusions, printing, incorporation on fibers, etc. This matrix may also be deposited on glass surfaces or plastic coatings (e.g., 150 μm polyethylene terephthalate (PET)) that will be applied to the surface of interest as a second step. The matrix must meet the durability requirements for effective functioning, including robustness. In one example, an inorganic polymer matrix such as a silica sol-gel is used. Silica sols can withstand degradation from reactive oxygen species. Curing temperatures are low, at less than 120° C., which allow compatibility with plastic substrates. Titania sols have been successfully deposited onto biomedical devices for photocatalytic antimicrobial testing.
Matrix materials that have high hardness values will impart good wear resistance to the film. Additionally, the non-photoactive porous support in the monolithic composite photocatalyst may also be exploited for its properties, including, in the case of Al2O3, hardness. It is expected that TiO2 (Mohs hardness=6) and Al2O3 (Mohs hardness=9) will provide high durability. Very small amounts of Al2O3 (<0.5%) have a large effect on the wear resistance of polymer films like epoxies. Additional additives that can enhance the mechanical properties of the films include silica, refractory oxides, carbides, nitrides.
These monolithic composite photocatalysts are typically insoluble in many solvents but may be dispersed in a variety of ways, including through milling and shear mixing. High-speed shear mixing mechanically shears large particles, reducing their size. As they become smaller, the monolithic composite photocatalyst is more easily dispersed. These monolithic composite photocatalysts may be added to spin-on-glasses, siloxanes, polyurethanes, etc., and the monolithic composite photocatalyst matrix material deposited using various spin coating, spraying, powder coating, dip coating, and 3D printing approaches.
Previous work has shown that UV light (365 nm) can degrade organics, but photo-degradation is not an expected outcome with visible light activation. The incorporation of monolithic composite photocatalysts into film matrix materials that contain organic species, including, e.g., siloxanes (silicones) and polyurethanes, must also be accomplished without degrading the organic components to a degree that affects the film wear-resistance during photocatalytic activity (i.e., the generation of reactive oxygen species). Use of monolithic composite photocatalysts will provide a barrier layer between the photocatalyst and the organic film. Further, dispersing minimum concentrations of the monolithic composite photocatalyst homogeneously throughout the film (accomplished by achieving high solubility through, e.g., shear mixing) is critical for preserving film properties.
Visible-light-activated monolithic composite photocatalysts, prepared as described in this invention, may be employed to impart antimicrobial properties to a variety of touch surfaces. Examples include touch screens, smart phone covers, elevator buttons, light switches and doorknobs. These items may be illuminated by ambient light or by lights provided internally for various functionality, e.g., backlighting of a smart phone screen, indicator lighting in switches, etc. The light source may be optionally programed to come on at intervals.
Another implementation may be the use of visible-light-activated monolithic composite photocatalyst in wound dressings. In this application, antimicrobial properties may be achieved without the use of antibiotics or materials toxic to the body. The dressing may be lighted externally or may have an internal light source. An example of the latter is a photoluminescent layer in proximity to the monolithic composite photocatalytic layer in the bandage. The illuminating layer could be a two-component mixture that is activated by breaking a barrier layer between the two materials that react to form light.
The Inventions summarized above are described and illustrated in several examples.
A sample of monolithic composite photocatalyst (150 mg) was loaded in a 10 mm outer diameter quartz tube. Titania photoactive nanocrystals are 1-2 nm in size and immobilized on an alumina non-photoactive porous support. The monolithic composite photocatalyst has a surface area in the range 50-400 m2/g, pores in the 6-40 nm range, and pore volume in the 0.4-0.8 cc/g range. The photoactive nanocrystal loading is 10-20%, and the titania was greater than 80% anatase.
The photocatalytic efficiency was tested in a single pass reactor. The loaded sample of monolithic composite photocatalyst was packed between quartz wool or stainless steel mesh into a 6.35 mm inner diameter, UV-transparent reactor tube. High packing density was achieved by gently tapping the side of the tube with the metal rod. The reactor was placed ca. 1 cm away from a strip of LED lights whose maximum emission was 365, 385, or 405 nm. The maximum radiant flux of each light is 1400, 1450, or 1450 mW, respectively. Lights were typically operated between 15-50% full power using a variable power supply. The LED strip contains 22 LEDs, but only 1-7 directly illuminated the catalyst bed. Gas was supplied through three calibrated mass flow controllers (MFCs). One MFC delivered toluene from a 10 ppm toluene cylinder balanced with dry air. A second MFC was used to dilute toluene using ultra-dry air. Toluene concentrations of 500-2500 ppb were used. The third MFC bubbled ultra-dry air through deionized water to provide humid air measured by an in-line humidity sensor. The system operated at 23% relative humidity. An in-line temperature sensor measured the temperature of the incoming gas at 23° C. Total flow rates through the reactor were 550-650 sccm. Total VOC concentration in the gas stream was monitored using a photoionization detector (Honeywell ppbRAE 3000).
Toluene conversion was measured in six steps. (1) The detector was 2-point calibrated by passing a known quantity of the target gas through an empty tube and ultrapure air through the same tube. (2) A baseline detector reading was measured by passing ultrapure air through the catalyst reactor for 1-5 minutes. (3) The desired toluene concentration was passed through the reactor until a steady reading on the ppbRAE was achieved, usually 10-30 minutes. (4) The LEDs were turned on to the desired power from 5 minutes to 24 hours, and the drop in the ppbRAE reading corresponded to the fraction of toluene that degraded over the monolithic composite photocatalyst, the ppbRAE does not detect CO2 from the reaction. Experiments without the photoactive TiO2 nanocrystals and LEDs showed no degradation of toluene, indicating the photoactive component was necessary for reaction. Degradation rates of toluene using this setup ranged from 0.05-2.0 μmol toluene*g TiO2−1*min−1 as plotted in
A sample monolithic composite photocatalyst (200 mg) with properties as described in the previous example was loaded into the 10 mm diameter quartz tube and analyzed as described in the previous example. Ethylene was supplied from a 10 ppm cylinder balanced with dry air. Initial ethylene concentrations in the reactor ranged from 500-2500 ppb. For ethylene detection, the ppbRAE was recalibrated to known quantities of ethylene through a blank tube. Ethylene conversion using this setup ranged from 0.1-0.7 μmol ethylene*g TiO2−1*min−1, as plotted in
A sample of monolithic composite photocatalyst with properties described in the previous example was ground in a mortar and pestle (75 mg). The powder was added to 1.5 mL water, and the slurry was sonicated for 40 minutes. A glass substrate (1″×2″) was prepared by a dilute nitric acid wash followed by a piranha etch wash, rinsed with water, and dried in a stream of nitrogen. The monolithic composite photocatalyst in water was drop-cast onto the surface of the substrate, and the sample was placed into an oven at 120° C. for 2 hours. The substrate was then heated to 300° C. for 1 hour and cooled. A similar procedure was used to deposit a film of the non-photoactive porous support.
A custom reactor was loaded with 35 mL of a 2.01×10−5 M solution of methylene blue in water. The substrate with monolithic composite photocatalyst described above was placed into the custom reactor where it was supported on rails above a stir bar. A fiberoptic dip probe was inserted next to the slide and a glass plate was placed on top of the reactor to prevent evaporation. UV light (365 nm) was supplied from 1-4 star-board LEDs with a maximum radiant flux of 2400 mW for each source mounted to an aluminum plate. The LEDs were placed 31 cm above the methylene blue reservoir to prevent a temperature increase of the solution and were operated so to give a uniform irradiance of the sample at 1 mW/cm2. Methylene blue degradation was measured as the decay in the adsorption spectra of methylene blue as a function of irradiation time from the 365 nm light source over 180 minutes. Photooxidation from the dip probe light sourced did not contribute to the degradation rate. The degradation of methylene blue over time is shown as the change in the absorbance at 665 nm with time, as depicted in
A sample of monolithic composite photocatalyst (50 mg) was placed in a 2 dram vial. The photoactive nanocrystals of this monolithic composite photocatalyst comprise titania with a Bi2O3 sensitizer at less than 10 mol % relative to the titania. The titania-Bi2O3 photoactive nanocrystals are on an alumina non-photoactive porous support. The monolithic composite photocatalyst has a surface area in the range 50-400 m2/g, pores in the 6-40 nm range, and pore volume in the 0.4-0.8 cc/g range. The photoactive nanocrystal loading is 10-20%, and the titania is greater than 80% anatase. To the monolithic composite photocatalyst was added 5 mL 5.3×10−4 M phenol in water. The sample vial was place horizontally on an orbital shaker set for 100 rpm. The sample vial was illuminated with 405 nm LEDs operated to provide the sample with a uniform irradiance of 12.2 mW/cm2. Phenol degradation was measured as the decay in the adsorption spectra of phenol as a function of irradiation time from the 405 nm light source over 6 hours. The degradation of phenol over time is shown as the change in the absorbance at 270 nm with time, as depicted in
A sample of monolithic composite photocatalyst with properties described in Example 3 was ground in a mortar and pestle (75 mg). The powder was added to 1.5 mL water, and the slurry was sonicated for 40 minutes. A glass substrate (1″×1.5″) was prepared by a dilute nitric acid wash followed by a piranha etch wash, rinsed with water, and dried in a stream of nitrogen. The monolithic composite photocatalyst in water was drop-cast onto the surface of the substrate, and the sample was placed into an oven at 120° C. for 2 hours. The substrate was then heated to 300° C. for 1 hour and cooled.
Highly purified dormant spores of a 168 strain of Bacillus subtilis, PS533, which carries a plasmid providing resistance to kanamycin (10 μg/mL), were suspended in water at ca. 1.5×108 colony forming units (CFUs)/mL. Approximately 1.5 mL of this suspension was applied to the prepared slides. The slides with the spores were then exposed at 23° C. to 365 nm irradiation approximately 6 cm from a single LED operating at a radiant flux of 2750 mW. At various times aliquots (ca. 20 μL) of the irradiated samples were diluted 1/10 in water and then serially diluted further. 10 μL aliquots of various dilutions were then spotted in duplicate in a grid on rich medium (L broth) agar plates containing 10 μg/mL kanamycin. After liquid was absorbed into the plates, they were incubated 16-36 h at 30-37° C., ensuring that individual colonies never got large enough to run together. However, no colonies appeared after ca 30 h. Finally, colonies were counted for irradiated samples with and without the photoactive nanocrystals, and CFUs, and thus the percentage of spore viability at various irradiation times, were calculated. An example of spore killing with the monolithic composite photocatalyst (black circles) and with the non-photoactive porous support only (open circles) is shown in
In order to incorporate the monolithic composite photocatalyst into a robust, thick polymer film, a technique known as powder coating may be used. Powder coating is a solventless painting method where electrostatically charged solid paint particles are sprayed onto an electrically grounded surface. The electrostatic charge is provided by an electrode that creates a corona discharge as a suspended mixture or air and the paint particles are fed through a spray gun. Alternatively, a fluidized bed may be used where the particles are suspended and contacted to the substrate therein. The coatings thus formed are thicker than typical solvent borne paints. A typical solvent borne paint coating may be in the range of 0.5-2 mils (1 mil= 1/1,000 of an inch), or approximately 12-50 microns. Powder coatings may be up to 12 mils in thickness. The thickness, combined with the properties of the powder coating formulation provides structural integrity.
The present invention incorporates monolithic composite photocatalysts into the powder coating. This integration may be carried out by co-spraying the monolithic composite photocatalyst with a standard powder coating formulation or by pre-mixing the monolithic composite photocatalyst into the powder coating formulation, for example by compounding through a heated screw extruder. The powder coating formulation contains the polymer matrix, which may be a polyester, an epoxy modified polyester, a polyurethane, or the like. Polyurethane compositions may include a so-called ‘blocking agent’, which prevents cross linking of the polymer until a certain temperature is reached in the cure cycle. The amount of monolithic composite photocatalyst added to the powder coat formulation (known as the “loading”) may be in the range of 0.5-40% by weight, more preferably, 5-20% by weight. The monolithic composite photocatalyst particles incorporated into the coating provide antimicrobial properties. A substantial advantage of the invention is that only a portion of the monolithic composite photocatalyst comprises photocatalytically active nanoparticles. This reduces potential damage to the polymer matrix of the coating due to decreased contact of the monolithic composite photocatalyst compared to a homogeneous photocatalytic particle of similar size as the monolithic composite photocatalyst. In other words, the areal % of photocatalytic nanoparticles on the non-photoactive porous support that are in contact with the polymer matrix of the coating is less than 100 areal %, preferably less than 90%, more preferably less than 50 areal %, and most preferably less than 10 areal %. Conversely, more than 0 areal % of the non-photoactive porous support is in contact with the polymer matrix of the coating, preferably 10 areal % of the non-photoactive porous support is in contact with the polymer matrix of the coating, more preferably more than 50 areal % of the non-photoactive porous support is in contact with the polymer matrix of the coating, and most preferably, more than 90% of the non-photoactive porous support is in contact with the polymer matrix of the coating. Regarding the specific term areal %, the term areal analysis is used in metallography to describe measurement of area percentages of different phases at the surface of a metallurgical specimen. Average areal fraction may be converted into areal %, which in the case of metallography, is used to estimate the volume of phase constituents. Here we define areal % as the percentage of one phase (e.g., a photocatalytic nanoparticle) to another phase (e.g., the non-photoactive porous support) on the exterior surface of the support. In the case of the subject invention, because the support substrate is porous, it may have a rough surface.
In order to prevent infiltration of the monolithic composite photocatalyst when the powder coat becomes liquid during the thermal curing cycle, an additional pore blocking agent may be pre-loaded into the monolithic composite photocatalyst prior to spraying. The pore blocking agent should fill the pores of the monolithic composite photocatalyst and volatilize at a temperature during the cure cycle where the powder coat is fluid and either beginning to cross link for a non-blocking agent formulation, or just below the temperature of decomposition/volatilization of the blocking agent. Useful agents for this purpose are non-corrosive, and have a well-defined boiling point in the range of 125-175° C. Such agents include, but are not limited to amyl acetate, anisole, cyclohexanone, furfural, hexyl-acetate, n-nonane, n-decane, naptha, various glycols, e.g., propylene glycol, turpentine. Alternatively, various capping agents and surface modifying agents described elsewhere in this invention may be used to cover the outer surface of the monolithic composite photocatalyst.
The monolithic composite photocatalyst may also be incorporated into alkyd, epoxy, latex, or acrylic base paints. Analogous pore blocking agents to those described for powder coating may be selected that prevent infiltration of the paint into the pores of the monolithic composite photocatalyst. In this case, the boiling point of the pore blocking agent is commensurate with the paint solvent, which may be water or an organic solvent. The pore blocking agent may be water.
In another aspect, the monolithic composite photocatalyst may be modified to increase its efficacy at mineralizing VOCs, including small-molecule ketones, alcohols, and aldehydes, in order to prevent release of incompletely mineralized intermediates during photocatalysis. As used herein and in the appended claims, small-molecule VOCs refer to VOCs with one to four carbons (C1-C4). Mineralizing these types of VOCs may, for example, be accomplished in a fluidized or fixed bed photoreactor, or using the subject monolithic composite photocatalyst incorporated in a membrane or fibrous network. There is a substantial amount of flexibility in the design and preparation of the monolithic composite photocatalyst, and this benefit can be exploited to maximize mineralization efficiencies and to reduce the likelihood that the formed intermediates will desorb from the monolithic composite photocatalyst surface before complete mineralization has occurred. Enhancing the adsorption capacity of the monolithic composite photocatalyst for acetone, formaldehyde, acetaldehyde or other small-molecule intermediates and increasing the mineralization rate of these species will reduce the desorption rate and the release of these chemical species into the effluent.
Mixed metal oxides like SiO2/ZrO2 exhibit enhanced adsorption capacities for, e.g., small-molecule VOCs like formaldehyde. Without being bound by theory, increased surface acidity of this oxide promotes increased adsorption capacity. The surface chemistry, including its acidity, can be modified by the choice of the porous, non-photoactive support in the monolithic composite photocatalyst, including, but not limited to alumina, silica, zirconia, zeolite, silicalite, silica-alumina, aluminosilicate, and combinations thereof. Surface acidity, surface chemistry, and photocatalytic mineralization rates may also be modified by the use of titania-based mixed-metal oxides as the photoactive nanocrystals in the monolithic composite photocatalyst, including, but not limited to, SiO2/TiO2, ZrO2/TiO2, SnO2/TiO2, SnO/TiO2, VOx/TiO2, and WO3/TiO2. Monolithic composite photocatalysts comprising mixed-metal oxide photoactive nanocrystals can be synthesized using impregnation techniques in which photoactive nanocrystal precursor solutions are added to the non-photoactive support. The precursors for the mixed metal oxides can be added simultaneously or sequentially with a drying step in between. Precursors useful for this impregnation include corresponding metal salts with, e.g., ethoxide, propoxide, isopropoxide, t-butoxide, nitrate, acetate, acetylacetonate, and oxalate ligands. Solvents for impregnation include water, ethanol, propanol, isopropanol, dilute sulfuric acid, dilute nitric acid, and combinations thereof. A high-temperature calcination step may be used to generate the monolithic composite photocatalyst comprising the mixed-metal oxide photoactive nanocrystals.
Monolithic composite photocatalysts comprising titania-based mixed-metal oxide photoactive agents may also be prepared from surfactant-capped mixed-metal oxide nanocrystals dissolved in solvents including water, ethanol, propanol, and isopropanol, and impregnated into the pores of the non-photoactive porous support or supporting element. Mixed metal oxide photoactive nanocrystals may be prepared following a variety of wet chemical and solvothermal approaches in a variety of shapes and sizes. Soluble, non-aggregated photoactive nanocrystals are prepared by incorporating ligands that can coordinate to the surface of the nanocrystals during growth. Ligands may be selected to facilitate the incorporation of the photoactive nanocrystals into the non-photoactive porous supporting element and may include such materials as alkyl carboxylic acids and alkyl alcohols. A high-temperature calcination step may be used to remove the surface organics, leaving the monolithic composite photocatalyst substantially organic-free.
Alternatively, the surface of a porous, non-photoactive supporting element may be modified with silica, zirconia, SnOx, vanadium oxide, or tungsten oxide by atomic layer deposition (ALD) approaches using precursor molecules and systems. Surface modification can include deposition or formation of partial or complete layers of the modifying elements or their compounds or alloys listed. Examples of precursor systems that can be deposited using ALD to synthesize metal-oxide-modified supports include various silanes (e.g., tetraethylorthosilicate, t-butyl silane, silane, etc.) and water as a co-reactant, tetrakis(dimethylamido)zirconium and water or ozone as co-reactants, tetramethyl tin and water as a co-reactant, W(CO)6 and ozone as a co-reactant, and VOCl3 and water as a co-reactant. These examples are not intended to limit the approach; other precursor and reactant combinations may be used.
Another approach to modify the porous, non-photoactive support of the monolithic composite photocatalyst is to impregnate the support with precursors of these metal oxides or graft organosilanes onto the support surface and then calcine to generate the metal-oxide-modified non-photoactive porous support. As in other embodiments, this modification can be through forming partial or complete layers of additional materials.
The use of monolithic composite photocatalysts incorporating small quantities (<4 wt %) of metals, such as Pt, Pd, Au, Ir, and Rh, for example, may also be used to enhance the oxidation rate of small molecule VOCs including aldehydes, alcohols, and ketones. These metals can be incorporated into the monolithic composite photocatalysts, either as individual species (i.e., a metallic specie), as bimetallic species, i.e., containing two metals (e.g., Pt—Pd), or trimetallic species, i.e., containing three metals (e.g., Pt—Pd—Rh), thereby modifying the surfaces of the monolithic composite photocatalysts. In addition to the photocatalytic oxidation of these VOCs, monolithic composite photocatalysts that incorporate metals may also enhance the oxidation rate of these small molecules, particularly formaldehyde, in the dark. These metals are included in the monolithic composite photocatalyst at less than 4 wt %, preferably between 0.01 and 3 wt %, more preferably between 0.05 and 2 wt %. Any of these metals are proximate to the photoactive nanocrystals on the non-photoactive porous support, thereby affecting their catalytic properties. These metals can be part of the photoactive nanocrystals, part of the non-photoactive porous support, or part of both components of the monolithic composite photocatalyst, modifying any or all of these structures.
Monolithic composite photocatalyst that incorporate metals can be synthesized using impregnation techniques in which metal precursor solutions are added to the monolithic composite photocatalyst and the solvent removed in a drying step. Repeated impregnation-drying steps may be used to increase the concentration of metal precursor in the monolithic composite photocatalyst. Metal precursors useful for this impregnation include platinum (II) chloride, platinum (IV) chloride, chloroplatinic acid, diamminedichloro platinum, diamine platinum nitrate, palladium nitrate, palladium (II) chloride, chloroauric acid, iridium acetate, iridium (III) chloride, rhodium acetate, and rhodium nitrate. Wet chemical routes including sodium borohydride can be used to synthesize the metal. Alternatively, high-temperature calcine treatments followed by a H2 reduction step also yields the monolithic composite photocatalyst incorporating the metal. Alternatively, metal nanocrystals, e.g., Au or Pt nanocrystals, capped with ligands can be synthesized. These capping agents promote dispersion of the nanoparticles in solvents such as, e.g., water, ethanol, propanol, hexane, or toluene, and allow the metal nanoparticles to be incorporated into the monolithic composite photocatalyst. High temperature treatments can be used to remove the capping ligands.
These monolithic composite photocatalysts, with titania-based mixed-metal oxide photoactive nanocrystals or that incorporate metals, may be used as a single, primary photocatalyst in the photoreactor purification system or they may be used in series with a different monolithic composite photocatalyst to achieve the required degree of mineralization. For example, a TiO2—SiO2 monolithic composite photocatalyst can be used to mineralize a VOC stream, and a second monolithic composite photocatalyst containing a photoactive Pt—TiO2 on a porous, non-photoactive Al2O3 could be implemented downstream to capture and convert any small-molecule VOCs that desorb from the upstream composite photocatalyst before mineralization is complete. In this case the downstream monolithic composite photocatalyst would be used as a polishing or finishing step.
For fluid purification, the monolithic composite photocatalyst may be disposed on a support structure, supporting element or scaffold. For the purposes of this invention, these terms may be used interchangeably, but for clarity, the term scaffold will be used to denote a structure upon which the monolithic composite photocatalyst may be disposed. The scaffold supports the monolithic composite photocatalysts, keeping them in place with the fluid flow region yet allowing facile access of the fluid to the monolithic composite photocatalyst and the photoactive nanoparticles disposed on the non-photoactive porous support of the monolithic composite photocatalyst. This assembly also provides excellent illumination efficiency with low pressure drop. The scaffold may be in the form of a mesh, membrane, open cell foam, honeycomb or non-woven filter-like element. A gas or liquid flowed through or over the scaffold contacts the monolithic composite photocatalyst, which will decompose VOCs, disable virus particles, and destroy bacteria and spores contained in the gas or liquid when the monolithic composite photocatalyst are illuminated with light. A monolithic composite photocatalyst 1101 disposed on a scaffold 1102 is shown in
A preferred scaffold has low optical absorption at optical wavelengths in the 350-410 nm range, e.g., >99% internal transmittance for a bulk material greater than 1 mm path length. A wide range of silicate glasses are candidates for use as scaffolds, as well as pure silica glass. These include borosilicate glass and many other silica containing compositions. Polymers with low optical absorption are also excellent candidates, including PTFE. The monolithic composite photocatalyst may be retained, affixed or adhered to the scaffold in a variety of ways. In one approach involving a mesh, which may be either non-woven or woven, dimensions of the monolithic composite photocatalyst 1201 are larger than the openings in the mesh 1202. The monolithic composite photocatalyst can thus be trapped or retained between two or more layers of mesh that provide low resistance to air flow through the mesh/catalyst assembly. As shown in
The monolithic composite photocatalyst 1401 may also be affixed to the scaffold 1402 using a glue or adhesion layer 1403. The glue layer may be an organic adhesive or an inorganic adhesive. Examples of organic adhesives include polyvinyl alcohol, acrylics, or urethanes. Inorganic glass compositions are useful as glue layers to affix the monolithic composite photocatalyst to a scaffold comprised of silica, alumina, or other glass fibers or networks. Inorganic adhesives may include sol-gel formulations based on silica. Low melting point silicate glasses also offer advantages for simplified thermal processing. A preferred embodiment for glue layers incorporates phosphorous oxide, potassium oxide or lithium oxide containing silicate glasses, which in some concentrations have softening temperatures below 250° C. and melting points below 500° C., while maintaining very low optical absorption for wavelengths in the 320 nm-700 nm wavelength range, i.e., UVA through visible wavelengths.
The preferred glue layer does not substantially penetrate the pores of the monolithic composite photocatalyst or substantially coat the external surface of the monolithic composite photocatalyst. In this way, the adsorptive and catalytic properties of the monolithic composite photocatalyst that provide fluid purification under illumination are retained and remain unimpaired. Here the term substantially penetrate is defined as <90% of the total volume of the monolithic composite photocatalyst, more preferably <50% or the total volume of the monolithic composite photocatalyst, and most preferably <10% of the total volume of the monolithic composite photocatalyst. Penetration may be measured by a physical means such as transmission electron microscopy or by BET analysis comparing similar amounts of affixed and unaffixed monolithic composite photocatalyst. The term substantially coat is defined as at least 50% of the total volume of the monolithic composite photocatalyst free or protruding above the scaffold surface and adhesion layer. A more desired level leaves at least 75% of the total volume of the monolithic composite photocatalyst free or protruding above the scaffold surface and adhesion layer. The most desired level leaves at least 90% of the total volume of the monolithic composite photocatalyst free or protruding above the scaffold surface and adhesion layer.
The availability of useful pore volume containing photoactive nanoparticles on the non-photoactive porous support may be alternatively defined as the height at which a monolithic composite photocatalyst protrudes above an adhesive layer or above the scaffold in the case where the monolithic composite photocatalyst is partially embedded in the scaffold. Here the term “protrude above” the adhesive layer is defined as the height of the monolithic composite photocatalyst above (?) the top of the adhesive layer or the top of the scaffold in the case where the monolithic composite photocatalyst is embedded in the scaffold divided by average diameter of the monolithic composite photocatalyst. Preferable, this ratio, expressed as percent, is >10%, more preferably, >50%, and most preferably >90%.
The monolithic composite photocatalyst 1501 may also be affixed to an organic polymeric scaffold 1502 depicted in
In order to provide fluid purification, the fluid is flowed across the membrane or filter-like assembly where the fluid contacts the monolithic composite photocatalyst and interacts with reactive oxygen species formed by the catalyst under illumination. Illumination may be in the 350-410 nm wavelength region or at wavelengths longer than 410 nm. Illumination may be provided by light sources in proximity to the scaffold, membrane or filter-like assembly via a plurality of LED sources. The LED sources may be disposed in a 2-dimensional array in a coplanar configuration with the membrane or filter-like assembly. A preferred embodiment incorporates a back reflector to redirect transmitted illumination back towards the photocatalyst containing membrane. This reflector may utilize an aluminum layer with pairs of low and high refractive index layers to enhance the reflectance at the illumination wavelength, e.g., achieving >95% reflectivity at 365 nm for normal incidence. The back reflector may redirect gas flow parallel to the reflector, and/or have perforations to allow gas flow through the reflector. The scaffold, membrane or filter-like assembly may also be cylindrical with an array of LED sources inside the cylinder arranged linearly along the longitudinal axis of the cylinder or in an array that is disposed in proximity to the outer surface of the cylinder. The membrane or filter-like assembly may also be folded into pleats to increase the surface area of the assembly in a given cross sectional segment of a duct or plenum.
One such scaffold that provides low pressure drop, material flexibility in both the media and catalyst is the microfibrous media entrapment method. Microfibrous entrapped catalysts (MFECs) sinterlock the catalyst particle in a fiber mesh with high voidage. The final product resembles a typical air filter but retains some flexibility to shape the resulting media for a desired application. The unique attributes of the monolithic composite photocatalyst allow greater flexibility in the materials that may be used for the microfibrous media and advantageously, UV-A transparent materials that are suitable for 365 nm illumination.
While material selection for the media in MFECs is diverse, encompassing polymers, glass and metals, the usable range of materials for a photocatalytic application is limited due to transmission of the active wavelength to the catalyst surface. For a fluidized system, operating at a high void fraction, this is not an issue because air transmits nearly 100% of all UV wavelengths. Selection of the UV transparent fibrous media material used to entrap the catalyst is crucial to both light utilization and media degradation.
One preferred wavelength for the monolithic composite photocatalyst is 365 nm radiation, which has advantages for both generating efficiency and expanding the materials with a high transmission rate and low degradation rate suitable for reactor internals. For example, applications requiring UV-C excitement must rely on materials such quartz, sapphire or calcium fluoride. Each of these materials have difficulties such as cost, workability and humidity tolerance. As seen in
The aforementioned materials in a fibrous form will work well as the scaffold in an MFEC reactor system allowing the use of MFECs as a scaffold for photocatalytic systems. The light efficiency and design flexibility derived from the wider selection of usable substrate materials and the use of efficient UV-A LEDs is made possible by the active radiation range of the monolithic composite photocatalyst.
In one embodiment, a monolithic composite photocatalyst with average diameter of 70 μm was affixed to a porous aluminum foam using liquid tetraethylorthosilicate (TEOS). The aluminum foam had a pore dimension of approximately 10 pores-per-inch (PPI) and a relative density of 4-6% compared to solid aluminum. TEOS was applied to the aluminum foam via dip coating from a solvent solution and dried. The catalyst was packed around the TEOS coated foam and placed in a furnace at 200° C. for 1 hr. After thermal treatment, the excess catalyst was removed by shaking.
In another embodiment, a monolithic composite photocatalyst with a bead-like form factor and an average diameter of 70 μm was affixed to a polypropylene woven mesh with a 0.031 inch hole size, 0.01 inch thick fibers, and 53% open area. The polymer mesh was encased between monolithic composite photocatalyst and heated under applied pressure by upper and lower heater blocks near the softening range of the polymer (180° C.).
In another embodiment, a sample of monolithic composite photocatalyst (300 mg) was immobilized on a 10 pores-per-inch (PPI) polyurethane (PU) scaffold. The monolithic composite photocatalyst comprises titania photoactive nanocrystals on an alumina non-photoactive porous scaffold. The monolithic composite photocatalyst has a surface area in the range 50-400 m2/g, pores in the 6-40 nm range, and pore volume in the 0.4-0.8 cc/g range. The photoactive nanocrystal loading is 10-20%. The PU scaffold was immersed in a 5-45% aqueous poly(vinyl alcohol) (PVA) solution. PVA molecular weight was 11,000-97,000 kDa. The monolithic composite photocatalyst was shaken with the PVA-coated PU scaffold to adhere it to the scaffold. The support and monolithic composite photocatalyst were subsequently cured at 25° C. for at least 16 hours.
The photocatalytic efficiency of this embodiment was tested in a single pass reactor. Total VOC concentration in the gas stream was monitored using a photoionization detector (Honeywell ppbRAE 3000). The detector was 2-point calibrated by passing a known quantity of the target gas through an empty tube and ultrapure air through the same tube. The immobilized composite photocatalyst/polyurethane scaffold, 4.5″ long, was packed inside a 7 mm inner diameter, UV-transparent reactor tube. The reactor was placed ca. 1 cm away from a strip of LED lights with maximum emission of 365 nm and a maximum radiant flux of 43.2 W, operating at 90% power. A humidified 6000 ppb toluene/air stream (40% RH) flowing at 994 sccm was passed through the dark reactor until a steady reading on the ppbRAE 3000 was achieved. The LEDs were turned on to the desired power for 120 min, and the drop in the ppbRAE 3000 reading corresponded to the fraction of toluene that was converted (
The subject invention may be embodied in the forgoing examples that are by no means restrictive, but intended to illustrate the invention. Any embodiment herein described may be combined with any other embodiment described, in particular different physical and chemical formulations of the monolithic composite photocatalysts.
This application is a U.S. Utility application taking priority from U.S. Provisional Application No. 62/564,408 “Photocatalytic Fluid Purification Systems” filed Sep. 28, 2017, U.S. Provisional Application No. 62/595,261 “Photocatalytic Surface Systems”, filed Dec. 6, 2017, U.S. Provisional Patent Application No. 62/760,428 “Monolithic Composite Photocatalyst” filed Sep. 13, 2108, U.S. Utility patent application Ser. No. 16/147,536 “Photocatalytic Fluid Purification Systems” filed Sep. 28, 2018 and from U.S. Utility patent application Ser. No. 16/212,663 “Photocatalytic Surface Systems” filed Dec. 6, 2018, U.S. Provisional Patent Application No. 62/883,286 “Photocatalytic Fluidized Bed Reactor Systems” filed Aug. 6, 2019, U.S. patent application Ser. No. 16/680,495 “Monolithic Composite Photocatalysts” filed Nov. 12, 2019, U.S. Provisional Patent Application No. 63/036,651 filed Jun. 9, 2020, U.S. Utility patent application Ser. No. 17/343,723 filed Jun. 9, 2021, and U.S. patent application Ser. No. 16/987,386 “Photocatalytic Surface Systems” filed Aug. 6, 2020 all herein incorporated by reference.
This invention was made with government support under contracts from the National Science Foundation, NSF Award #1721968, and US Department of Agriculture, USDA Award #2018-33610-28231. The government has certain rights in the invention.
Number | Name | Date | Kind |
---|---|---|---|
7282259 | Ku | Oct 2007 | B2 |
7868078 | Jarrell | Jan 2011 | B2 |
8309489 | Roldan Cuenya | Nov 2012 | B2 |
8513158 | Roldan Cuenya | Aug 2013 | B2 |
8613900 | Frei | Dec 2013 | B2 |
8846190 | Belcher | Sep 2014 | B2 |
9029286 | Neltner | May 2015 | B2 |
9078942 | Yao | Jul 2015 | B2 |
10351841 | Corgie | Jul 2019 | B2 |
10533987 | Kim | Jan 2020 | B2 |
10734167 | El-Kady | Aug 2020 | B2 |
20050266227 | Ku | Dec 2005 | A1 |
20090093361 | Sakatani | Apr 2009 | A1 |
20110192789 | Gogotsi | Aug 2011 | A1 |
20160071655 | Li | Mar 2016 | A1 |
20180127709 | Mukhopadhyay | May 2018 | A1 |
20180195197 | Pan | Jul 2018 | A1 |
20210322909 | Liu | Oct 2021 | A1 |
Number | Date | Country | |
---|---|---|---|
20220111353 A1 | Apr 2022 | US |
Number | Date | Country | |
---|---|---|---|
63036651 | Jun 2020 | US | |
62883286 | Aug 2019 | US | |
62760428 | Nov 2018 | US | |
62595261 | Dec 2017 | US | |
62564408 | Sep 2017 | US |
Number | Date | Country | |
---|---|---|---|
Parent | 17343723 | Jun 2021 | US |
Child | 17481279 | US | |
Parent | 16987386 | Aug 2020 | US |
Child | 17481279 | US | |
Parent | 16680495 | Nov 2019 | US |
Child | 17343723 | US | |
Parent | 16212663 | Dec 2018 | US |
Child | 17343723 | US | |
Parent | 16212663 | Dec 2018 | US |
Child | 16680495 | US | |
Parent | 16147536 | Sep 2018 | US |
Child | 17343723 | US | |
Parent | 16147536 | Sep 2018 | US |
Child | 16680495 | US | |
Parent | 16147536 | Sep 2018 | US |
Child | 16987386 | US | |
Parent | 16147536 | Sep 2018 | US |
Child | 17481279 | US | |
Parent | 16212663 | Dec 2018 | US |
Child | 16987386 | US | |
Parent | 16680495 | Nov 2019 | US |
Child | 16987386 | US | |
Parent | 16147536 | Sep 2018 | US |
Child | 16212663 | US | |
Parent | 16212663 | Dec 2018 | US |
Child | 16147536 | US | |
Parent | 16680495 | Nov 2019 | US |
Child | 17481279 | US | |
Parent | 16147536 | Sep 2018 | US |
Child | 16680495 | US | |
Parent | 16212663 | Dec 2018 | US |
Child | 16680495 | US | |
Parent | 16987386 | Aug 2020 | US |
Child | 17343723 | US | |
Parent | 16680495 | Nov 2019 | US |
Child | 16987386 | US | |
Parent | 16212663 | Dec 2018 | US |
Child | 16987386 | US | |
Parent | 16147536 | Sep 2018 | US |
Child | 16987386 | US | |
Parent | 16212663 | Dec 2018 | US |
Child | 16680495 | US | |
Parent | 16147536 | Sep 2018 | US |
Child | 16680495 | US |