The present inventions relate to multivariable component systems and activities for the management, mitigation, and suppression of wildfires. In particular, the present inventions relate to automated systems and methods for the monitoring and management of hydration levels near and around structures for the management, mitigation and suppression of wildfires.
As used herein, unless specified otherwise, the terms “multivariable component system”, “multivariable component activities”, “multivariable components” and similar such terms are to be given their broadest possible meanings, and would include, for example, the flow of motorized vehicle traffic in a traffic pattern, a particular area or location, or highway system; the movement of people in a particular area, location or within a structure; the movement and location of emergency response equipment and personnel including fire trucks, police, rescue, medical, ambulances, heavy equipment, and flight equipment (e.g., air planes and helicopters); the location and path of a wildfire.
The term “wildfire” as used herein, unless specified otherwise should be given its broadest possible meaning and would include any outdoor fire, and any fire that is located outside of a structure, this would include for example brush fires, forest fires, and grass fires. The term wildfire, however, as used herein, unless specified otherwise, would further include structure fires that were caused directly or indirectly by a wildfire.
In a wildfire, and in particular in situations where the fire is threatening or active in a populated area, there are highly complex and unpredictable multi-variable, multi-actor events that can take place, these multi-variable, multi-actor events are further complicated by a loss of visibly that typically occurs at, near and in a wildfire. Events and variables, such as temperature, humidity, wind speed, location of the fire, available fuel for the fire, terrain, movement and location of fire crews, road closures, traffic conditions, movement and location of people and private vehicles, as well as, evolving strategies to combat the wildfire and protect life and property, typically by several different agencies or emergency response groups makes it very difficult, if not impossible to effectively and efficiently manage the wildfire, the people and property involved with the wildfire, and determine, implement and adapt the most effective integrated strategy and response to protect life and property from the wildfire. Although emergency response and fire management agencies and groups do an admirable, commendable and heroic job in response to a wildfire, all would agree that better, more efficient, more effective and safer integrated strategies and responses are needed. This failing by those of skill in the art of emergency response and fire management to provide integrated and comprehensive, solutions and predictions regarding trends and conditions relating directly to the fire, e.g., fire intensity, wind, humidity, fire direction, persons at risk in the fire and directly in the path of the fire, structures in the fire and directly in the fires path, fuel sources in fire path, as well as, peripheral matters to the fire, such as evacuation routes, traffic, occupancy, type of structure, static fire protections systems (i.e., structure or areas with their own fire protection system such a sprinklers, foam, flowing water), access to the active fire area and predicted path of the fire for response teams, the movement of response teams, and logistics of supplies. This failing occurs, in spite of the fact, and perhaps because of the fact, that there is a large amount of real time raw data and historic raw data available about a fire, fire conditions, traffic, logistics, etc.
This large stream, or amount, of raw data provides little or no determinative information or predictive value. Further, and in general, the trend in the art of data management, media and public information has been to provide more and more data, and to present this data in fancier packaging, images and graphics. While this more visually stimulating presentation of raw data may be entertaining to some, its large volume may be confusing to others. Thus, in spite of the direction of the art to provide larger and larger amounts of raw data, and to do so in more visually stimulating ways, there exists a long felt and unmet need for determinative information of predictive value in wildfire mitigation and management, either or both: (i) directly related to the fire, for example, fire intensity, wind, humidity, fire direction, predicted path of the fire, location of embers, direction of embers, persons at risk in the fire and directly in the path of the fire, structures in the fire and directly in the path of the path, fuel sources in the fire path, water supply and usage in the fire area, power grid in the fire area; and, (ii) peripherally associated with or indirectly related to the fire, for example, evacuation routes, traffic, occupancy, type of structure, static fire protections systems (e.g., structure or areas with their own fire protection system such a sprinklers, foam, flowing water), access and egress for the active fire area, access and egress for the area in the predicted path of the fire, response team (e.g., ambulance, fire, medical, evacuation, heavy equipment, air support, police) movement, response team location, power grid operability, water availability, and logistics of supplies. It being understood that in fast moving and evolving wildfire situations, indirectly related matters can, and often do, become directly related matters.
This long felt and unmet need is exacerbated further by the rapidly increasing channels and access that professionals, public agencies, and the public (i.e., individuals) have through cable, radio, satellite radio, web pages, applications, television (cable and broadcast), mobile devices, laptops, iPads, cell phones, smart phones, watches, vehicle systems (e.g., navigation systems, self-driving systems, and interactive systems such as ONSTAR), and other portable and fixed data interfaces. Portable or mobile devices such as vehicle systems, phones, smart phones, tablets, iPads, laptops, watches and other portable devices are often unified by their ability to process data and structure and present content in the core internet technology of HTML5, whereas previous generation displays could be fragmented with heavier, less responsive, and generally more clunky platforms. These portable data interfaces present an even larger challenge to reducing the clutter, confusion, and general data overload to a user because often value-added data must be presented in more constrained visual real estate such as a mobile device screen and other portable data interface screens.
Furthermore, the clutter, confusion, and general data overload to a user can obscure desired user engagement mechanisms such as evacuation route planning, where an individual cannot easily determine their standing in real-time relative to the fire, traffic conditions and fire response teams.
Prior to the present inventions, no mechanism exists to create fully integrated, based upon historic data, real time data and both, systems for wildfire mitigation, management including direct and peripheral matters and activities. Further, for the purpose of planning and developing emergency plans, prior to the present inventions there exists no mechanism to create fully integrated, based upon historic data, hypothetical data, and both, virtual wildfire scenarios for the purpose of, by way of example, creating emergency response plans and training exercises.
As used herein, unless specified otherwise, the terms “actual data”, “actual information”, “raw data”, “raw information”, and similar such terms are to be given their broadest possible meaning and would include information obtained from direct and indirect observation, monitoring, measuring, sensing and combinations and variations of these. Actual data would include, for example: data from external fire suppression systems; global positioning satellite (gps) data; traffic sensor data; traffic camera data; traffic and map application data (such as WAZE, google maps); atmospheric temperature data, atmospheric wind data; atmospheric humidity data; weather data; transponder data, fire systems sensor data; sensors located in the environment data; data from individuals and professionals; cell phone data, such as location, speed, direction); and data from other devices, such as optical switches, laser radar, laser range finding and laser tracking, magnetic sensors such as those which may be embedded in a road surface, visual data; telemetry, such as when sensor, probe and monitor data is transmitted to a receiver, and radar measurement and monitoring systems. Actual data may also be logged on-board vehicle data, or data at a monitoring station that is stored and downloaded after fire management or emergency activity to become historic data. Actual data and information may be provided, received or obtained real-time, it may be provided, received or obtained as historic data or stored actual information from a prior event, and combinations and variations of these. Actual data and information may be in compilations of data, which may further be sorted, indexed, tagged or otherwise categorized.
As used herein, unless specified otherwise, the terms “derived data”, “derived information” and similar such terms are to be given their broadest possible meaning and would include raw data upon which a calculation or operation has been performed. For example, if water consumption rate, e.g., gallons used per hour, is calculated by performing the operation of obtaining raw data for the amount of water present w1, and w2 at time t1 and t2; then calculating the amount of water used over time interval t2−t1, the resultant value, e.g., gals/hour, would be an example of derived data. Alternatively, if a flow sensor is installed on the water line or tank that directly measures the amount of water flowing from the line or tank, the data from that flow sensor would be actual data, not derived data. Accordingly, values such as averages are considered derived data, because they are derived from one or more operations on raw data. Although examples of simple (one, two or three) operations are provided above, it should be understood that tens, hundreds, thousands, and hundreds of thousands of operations or calculations, or more, may be performed on data to obtain derived data.
When derived data is stored, it becomes historic data, but also remains derived data, i.e., historic derived data. Derived data can be subjected to operations and calculations with the resulting information being derived data. Further, derived data, for example from real time raw data, can be combined with historic data, raw or derived, e.g., how a wildfire in a similar geographic setting behaved under similar environmental conditions, and used in operations and calculations to render additional derived data.
Derived data, from real time raw data, from historic data, and from combinations and variations of these, may be determinative information of predictive value to a multivariable component system, and in particular predictive value to a wildfire.
As used herein, unless specified otherwise, the terms “predictive data”, “predictive information”, “determinative information” and “determinative data” are to be given there broadest possible meanings and would include derived data and information that provides, for example, information about trends, information leading to future outcome, future events, predicted events, trends leading to further events, normalized real time performance as an indicator of future actions or events, and similar mathematically derived and predictive values that are, or are at least in part based upon, derived data. Predictive data and information would include derived data in the form of probabilities of likely outcome, windows of likely outcome and similar types of values. Predictive data may be micro in nature, macro in nature, cumulative in nature, and combinations and variations of these. Thus, for example, predicting that a particular fire crew will be positioned at a certain location at a certain time would be predictive information that is micro in nature. Using this micro predictive information with other predictive information, derived data, and raw data to predict that X homes need to be evacuated at time t, X′ homes need to have external fire management systems turned on at time t1, and Y fire response teams need to be at the area where the X homes are located at time t2 would be an example of predictive information that is macro in nature. Predictive information about progression of a wildfire, embers, the evacuation of residents, traffic flow on ingress and egress routes, the activation of external fire management systems, and the positing of fire response teams would be a further example of predictive information that is macro in nature, and would also be comprehensive macro predictive information, and integrated macro predictive information.
As used herein, unless specified otherwise, the terms “external fire management system” (“EFMS”), “external fire suppression system”, “static fire protection system”, “fixed fire protection system”, “structure fire protection system” and similar such terms, should be given their broadest possible meaning, and would include systems that provide a fire suppressant medium (e.g., water) on the outside of structures, to the adjacent grounds and both. The adjacent grounds would include land area, vegetation, and materials located in contact with, adjacent to, near and around the structure, e.g., as far as about 10 feet, about 20 feet, and about 50 feet, from 10 feet to 30 feet, from 5 feet to 75 feet, or more from the exterior walls of the structure. These systems can for example provide water in the form of sprays, mists, streams, sheets and combinations and variations of these to the structures and adjacent grounds. The systems can provide fire suppressant foam to the outside of structures and to the adjacent grounds. These systems can provide combinations of water and foam. These systems can, and typically do have, sensors and monitors, that provide data about the system, its activation, its rate of use of fire suppression medium (e.g., water or foam), the temperature(s) in and around the structure. These systems may also have internal fire suppression systems for addressing fires within the structure, as well as, the exterior of the structure and adjacent ground. It is understood that the exterior or outside of the structure includes one or more of the roof, exterior walls, outer surfaces of outside walls, gutters, garage doors, or any portion or part of the structure that is exposed to the outside environment, and thus likely to be exposed to the wildfire and embers. An example of a fixed fire protection system would be those provided by Frontline Fire Protection LLC., in Casper Wyoming.
As used herein, unless specified otherwise, the terms “virtual data”, “virtual entity” and similar such terms are to be given their broadest possible meaning and would include any types of data that are generated from, capture, result from, or relate to virtual activities. Thus, for example, if raw data, derived data and predictive data are used to conduct a virtual wildfire response, the information and data regarding that virtual response would be considered virtual data and information. Thus, it can be seen that there may be historic virtual data (e.g., last year's emergency virtual drill) and real time virtual data (e.g., a virtual drill being conducted real time). There may also be raw virtual data, derived virtual data, and predictive virtual data. Essentially, it is contemplated that all of the data, computations and predictions from the real world, may be used in a similar manner in a virtual world for planning, drilling and practicing purposes. It is further contemplated that these virtual activities can be used by professionals, as well as, private individuals, much as flight simulators can be used by pilots for training purposes, and amateurs for entertainment purposes.
As used herein, unless specified otherwise, the terms “node”, “communication node”, “point on a network”, “communication point”, “data point”, “network address” and similar such terms are to be given their broadest possible meanings, and would include for example, sensors, processors, data receiving assemblies, data transmitting assemblies, data receiving/processing/transmitting assemblies, GUI, satellite dishes, cable boxes, transmitters, TVs, computers, gaming stations, gps transmitters, cellular devices, cellular phones, tablets, iPhones®, iPad®, I/O (input/output) devices, and data storage devices. A node may also be a structure or location where other nodes may be present, for example a structure with an external fire management system, having its own control network of sensors, activators, cell phone applications, and I/O devices.
As used herein, unless specified otherwise, the term “GUI” (graphic user interface) is to be given its broadest possible meaning and would include for example devices that are fully interactive, partially interactive and not interactive, it would include all types of displays and monitors (both with and without keyboards), it would include touch screen monitors and even heads up displays and Google Glass. Braille devices, and other devices for assisting in and communicating with the visually impaired, or persons with other disabilities, are considered herein to be a GUI.
As used herein, unless specified otherwise, the terms “network”, “network pathway”, “pathway” and similar terms are to be given there broadest meaning and would include any wires, optical, wireless, fibers, light waves, magnetic wave, or other medium over which data can be transmitted, combinations of various types of different types of these mediums, which would include for example, satellite broadcasts, conventional television signals, cable networks, telephone networks, DSL networks, the internet, the world wide web, intranets, private networks, local networks, cellular, Ethernet, node to node links, radio, telegraph, power lines, and other presently known or later developed technologies for transmitting, receiving and/or sharing data and information.
As used herein, unless specified otherwise the terms “adaptative strategy”, “automated adaptive strategy”, “responsive adaptive strategy” mean instructions, plans and strategies that are based upon predictive data, derived data or both, and that change (e.g., are updated) over a period of time during a wildfire event, based upon predictive, derived and both data that is obtained after the start of the wildfire event, after the initial implementation of a strategy, and both. Adaptive strategies can be updated once, twice, tens of times and thousands of times. The updates can occur in any time interval from days, to hours to minutes to seconds to fractions of a second.
Generally, the term “about” and the symbol “—” as used herein, unless specified otherwise, is meant to encompass the greater of a variance or range of ±10%, or the experimental or instrument error associated with obtaining the stated value.
As used herein, unless expressly stated otherwise terms such as “at least”, “greater than”, also mean “not less than”, i.e., such terms exclude lower values unless expressly stated otherwise.
As used herein, unless stated otherwise, room temperature is 25° C. And, standard temperature and pressure is 25° C. and 1 atmosphere. Unless expressly stated otherwise all tests, test results, physical properties, and values that are temperature dependent, pressure dependent, or both, are provided at standard temperature and pressure.
As used herein, unless specified otherwise, the recitation of ranges of values, a range, from about “x” to about “y”, and similar such terms and quantifications, serve as merely shorthand methods of referring individually to separate values within the range. Thus, they include each item, feature, value, amount or quantity falling within that range. As used herein, unless specified otherwise, each and all individual points within a range are incorporated into this specification, and are a part of this specification, as if they were individually recited herein.
This Background of the Invention section is intended to introduce various aspects of the art, which may be associated with embodiments of the present inventions. Thus, the foregoing discussion in this section provides a framework for better understanding the present inventions, and is not to be viewed as an admission of prior art.
There has been a long standing, ever increasing and unmet need for systems, networks and methods that can provide derived data, predictive data, adaptive strategies, virtual data and combinations and variations of these, for multivariable component systems, such as wildfire mitigation, management and suppression, including wildfire emergency response management. This long standing and unmet need is believed to be present across all aspects of wildfire mitigation, management and suppression, including for example: activation of external fire management systems; management of ingress and egress routes; evacuations, including notices and plans; response team deployment and supplies, to name a few. The present inventions meet these and other needs.
Thus, there is provided an external fire management system (EFMS) for a structure, the system having: a delivery system comprising plurality of sprinkler heads; wherein the sprinkler heads are in fluid communication with a source of a hydration material; wherein the sprinkler heads are located on exterior of a structure; wherein the structure defines a footprint of the structure; a control system; wherein the control systems is in control communication with the delivery system; the control system comprising hydration plan control commands; wherein the hydration plan control commands are configured to receive an input, and thereby upon receipt of the input provide the hydration material to a predetermined first zone; and provide the hydration material to a second zone; wherein the first zone defines an area that extends uniformly from 4 to about 7 feet away from the structure and thereby the first zone defines a first zone footprint that is larger than and the same shape as the footprint of the structure; and, wherein the second zone defines an area that extends uniformly from 15 to about 30 feet away from the structure and thereby the second zone defines a second zone footprint that is large than and the same shape as the footprint of the structure and larger than and the same shape as the first zone footprint.
There is further provided these systems and methods having one or more of the following features: wherein hydration material comprises water, foam or a mixture of water and foam’ wherein the input is one or more of data from a hydration sensor, a signal from a sensor located in the first zone, data from sensor located in the second zone, a signal comprising date information, a signal from a controller, a signal from a GUI located at the structure, a signal from a network and data from a network; wherein the sprinklers heads define a sprinkler pattern; wherein the sprinkler pattern comprises a first sprinkler pattern and a second sprinkler pattern; wherein the first sprinkler pattern covers 100% of the first zone; wherein the second sprinkler pattern covers 100% of the first zone and at least 90% of the second zone; wherein the hydration plan control commands define a hydration plan; wherein the hydration plan comprises one or more of a maintenance hydration plan; wherein the hydration plan comprises a prewetting hydration plan; and, wherein the hydration plan comprises an in-event soak hydration plan.
Yet additionally there is provided an external fire management system for a structure, the system having: a plurality of sprinkler heads; wherein the sprinkler heads are in fluid communication with a source of a hydration material; wherein the sprinkler heads are located on the exterior of a structure; wherein the structure defines a footprint of the structure; a control system; wherein the control systems is in control communication with a system for delivering the hydration material through the sprinkler heads; the control system comprising hydration plan control commands; wherein the hydration plan control commands are configured to provide the hydration material to a first zone at a first hydration rate; and provide the hydration material to a second zone at a second hydration rate; wherein the first zone defines an area that extends uniformly from 1 to about 7 feet away from the structure and thereby the first zone defines a footprint that is large than and the same shape as the footprint of the structure; and, wherein the second zone defines an area that extends from 10 to about 30 feet away from the structure.
Moreover, there is provided these systems and methods having one or more of the following features: wherein hydration material comprises water, foam or a mixture of water and foam; wherein the sprinklers heads define a sprinkler pattern; wherein the sprinkler pattern comprises a first sprinkler pattern and a second sprinkler pattern; wherein the first sprinkler pattern covers 100% of the first zone; wherein the second sprinkler pattern covers 100% of the first zone and at least 90% of the second zone; wherein the hydration plan control commands define a hydration plan; wherein the hydration plan comprises a maintenance hydration plan; wherein the hydration plan comprises one or more of a prewetting hydration plan; and wherein the hydration plan comprises an in-event soak hydration plan.
Furthermore, there is provided an external fire management system for a structure, the system having: a means for delivering a hydration material to a predetermined area adjacent to a structure; wherein the means for delivery comprises in fluid communication a plurality of distribution heads; valves; pipes; and a source off a hydration material; the means for delivery further comprising a motive means for flowing the hydration material through the distribution heads; wherein the hydration material comprises water; wherein the means for delivering is configured to deliver the hydration material to a first zone of the predetermined area adjacent to the structure; wherein the means for delivering is configured to deliver the hydration material to a second zone of the predetermined area adjacent to the first zone of the predetermined area; a control system; wherein the control systems is in control communication with the means for delivery; the control system comprising hydration plan control commands.
Still further there is provided an automated method of maintaining a hydration level in a first and a second zone surrounding a structure to mitigate the risk of a wildfire event, the method including: a control system comprising a hydration plan control commands; the control system operating an external fire management system to hydrate an area surround a structure in accordance with a hydration plan; whereby the area surround the structure is maintained at a predetermined level of hydration.
Yet additionally, there is provided these system and methods wherein the automated method of maintain hydration utilizes a geo-fenced location of potential fire threat relative to the location of the protected structure, and based upon this geo-fenced location threat evaluation doing one or more of revising, modifying and operating the hydration plan.
Moreover there is provided a system for obtaining, evaluating and displaying in a predictive manner, information and data regarding fire emergencies, the system having: a plurality of units configured to provide raw data regarding a fire; wherein each unit comprises a communication node on a communication network; wherein at least one of the plurality of units is a mobile unit, having a processor and a GUI; and, wherein at least one of the plurality of units is a fixed unit having a processor and a GUI; a source of derived data regarding one or more of the fire location, a weather condition, a fire movement, a path of a fire, a traffic condition, available water, water usage, a power grid, and electrical usage; wherein the source of derived data comprises a communication node on the communication network; a processor having a communication node on the communication network, thereby placing the processor in communication with the source of derived data and at least one of the plurality of units; the processor capable of performing a first predictive computation to determine a change of state event from the raw data and the derived data; whereby the processor determines predictive information having a probability for the change of state event, and wherein the processer communicates the predictive information to the network, for display by one or more of the units; and a controller in control communication with an external file management system, the controller comprising a processor, a memory and a hydration plan control commands.
Additionally, there is provided a system for obtaining, evaluating and displaying information and data regarding wildfires, EFMSs and mobile units, the system having: a plurality of mobile units configured to receive and transmit information, data or both regarding a wildfire, an EFMS or both, and over a network; wherein the units comprise a node on the network; wherein the units comprise a means to determine the location of the unit; wherein the unit having a processor, a memory device and a GUI; wherein the information or data comprises one or more of a location of a fire, a location of smoke, a location of embers, a direction of movement of a fire, and an evacuation route; a plurality of fixed units configured to receive and transmit information and data over the network; wherein each unit comprises a node on the network; wherein each units having a processor and a memory device; and, wherein each unit is a component of an EFMS; wherein at least one of the mobile units is in control communication with at least one of the fixed units; and a controller in control communication with an external file management system, the controller comprising a processor, a memory and a hydration plan control commands.
Moreover, there is provided a method for obtaining, evaluating and displaying information and data regarding wildfires, EFMSs and mobile units, the method having: a plurality of mobile units receiving and transmitting information, data or both regarding a wildfire, an EFMS or both, and over a network; wherein the units comprise a node on the network; wherein the units comprise a means to determine the location of the unit; wherein the unit having a processor, a memory device and a GUI; wherein the information or data comprises one or more of a location of a fire, a location of smoke, a location of embers, a direction of movement of a fire, and an evacuation route; a plurality of fixed units configured to receive and transmit information and data over the network; wherein each unit comprises a node on the network; wherein each units having a processor and a memory device; wherein each unit is a component of an EFMS; and, wherein at least one of the mobile units is in control communication with at least one of the fixed units; and a controller in control communication with an external file management system, the controller comprising a processor, a memory and a hydration plan control commands.
Still further, there is provided a method for obtaining, evaluating and displaying information and data regarding wildfires, EFMSs and mobile units, the methods having: a plurality of mobile units receiving and transmitting information, data or both regarding a wildfire, an EFMS or both, and over a network; wherein the units comprise a node on the network; wherein the units comprise a means to determine the location of the unit; wherein the unit having a processor, a memory device and a GUI; wherein the information or data comprises one or more of a location of a fire, a location of smoke, a location of embers, a direction of movement of a fire, and an evacuation route; a plurality of fixed units configured to receive and transmit information and data over the network; wherein each unit comprises a node on the network; wherein each units having a processor and a memory device; and, wherein each unit is a component of an EFMS; and, wherein at least one of the mobile units is in control communication with at least one of the fixed units.
Yet additionally, there is provided a system for obtaining, evaluating and displaying information and data regarding wildfires, EFMSs and mobile units, the system having: a plurality of mobile units configured to receive and transmit information, data or both regarding a wildfire, an EFMS or both, and over a network; wherein the units comprise a node on the network; wherein the units comprise a means to determine the location of the unit; wherein the unit having a processor, a memory device and a GUI; wherein the information or data comprises one or more of a location of a fire, a location of smoke, a location of embers, a direction of movement of a fire, and an evacuation route; a plurality of fixed units configured to receive and transmit information and data over the network; wherein each unit comprises a node on the network; wherein each units having a processor and a memory device; wherein each unit is a component of an EFMS; and, wherein at least one of the mobile units is in control communication with at least one of the fixed units; and a controller in control communication with an external file management system, the controller comprising a processor, a memory and a hydration plan control commands.
Additionally, there is provided a system for obtaining, evaluating and displaying in a predictive manner, information and data regarding an emergency, the system having: a plurality of units configured to provide raw data regarding the emergency; wherein each unit comprises a communication node on a communication network; wherein at least one of the plurality of units is a mobile unit, having a processor and a GUI; and, wherein at least one of the plurality of units is a fixed unit having a processor and a GUI; a source of derived data regarding one or more of a weather condition, a water level, a tidal condition, a seismic activity, a geologic condition, a river level, a traffic condition, water usage, an electrical usage, and an electric grid; wherein the source of derived data comprises a communication node on the communication network; a processor having a communication node on the communication network, thereby placing the processor in communication with the source of derived data and at least one of the plurality of units; the processor capable of performing a first predictive computation to determine a change of state event from the raw data and the derived data; and, whereby the processor determines predictive information having a probability for the change of state event, wherein the processor communicates the predictive information to the network, for display by one or more of the units; and a controller in control communication with an external file management system, the controller comprising a processor, a memory and a hydration plan control commands.
Moreover, there is provided a system for obtaining, evaluating and displaying information and data regarding emergencies and mobile units, the system having: a plurality of mobile units configured to receive and transmit information, data or both regarding an emergency over a network; wherein the units comprise a node on the network; wherein the units comprise a means to determine the location of the unit; wherein the unit having a processor, a memory device and a GUI; wherein the information or data comprises one or more of a weather condition, a water level, a tidal condition, a seismic activity, a geologic condition, a river level, a traffic condition, water usage, an electrical usage, and an electric grid; a plurality of fixed units configured to receive and transmit information and data over the network; wherein each unit comprises a node on the network; wherein each units having a processor and a memory device; and, wherein at least one of the fixed units is associated with a structure; wherein at least one of the mobile units is in control communication with at least one of the fixed units; and a controller in control communication with an external file management system, the controller comprising a processor, a memory and a hydration plan control commands.
Still further, there is provided an integrated system having a network having a plurality of nodes on the network, the integrated system having: a plurality of nodes on a network; a first node of the plurality of nodes associated with an EFMS, wherein the EFMS is associated with a structure; a second node of the plurality of nodes associated with a first mobile device having a first GUI; a third node of the plurality of nodes associated with a second mobile device having a second GUI; a fourth node of the plurality of nodes associated with a data processing assembly; whereby the data processing assembly is in communication with the EFMS, the first mobile device and the second mobile device; wherein the first and the second GUI comprises configurations to display an output, receive an input, or both of at least three of the functionalities of: fire location; I see fire; fire; heavy smoke; embers; fire danger; no fires in area; smoke in area; fire in area; fire nearby; track a wildfire; hotspots; and, wherein the second GUI comprises configurations to display an output, receive an input, or both of at least three of the functionalities of: EFMS status; EFMS system ready; EFMS sprinklers; activate systems; fire department alert; wildfire distance alert; and fire emergency checklist; and a controller in control communication with EFMS, the controller comprising a processor, a memory and a hydration plan control commands.
Additionally, there is provided a method of operating any of these systems to operate an EFMS.
Further, there is provided a A method of operating any of these systems to automatically operate an EFMS.
In addition, there is provided a method of operating any of these systems to provide information to a node on the network for avoiding, mitigating or both, a wildfire.
Additionally, there is provided a method of operating any of these systems to avoid, mitigate or both, a wildfire.
Furthermore, there is provided these systems and methods having one or more of the following features: wherein the raw data comprises one or more of a location of a fire, a location of smoke, a location of embers, a direction of movement of a fire, and an evacuation route; wherein the at least one of the plurality of units is also a source of derived data; wherein one of the fixed units is a EFMS; having at least ten fixed units, wherein the ten fixed units each comprises an EFMS associated with a structure; wherein at least one of the plurality of units is in control communication with an EFMS; wherein at least one of the plurality of units is in control communication with at least one of the fixed units; wherein at least one of the plurality of units is in control communication with at least one of the fixed units, wherein the at least one of the fixed units is an EFMS; wherein at least one of the plurality of units comprises a unit selected from the group consisting of cell tower, a traffic camera, a cell phone, an automobile navigation system; wherein the plurality of fixed units having at least ten EFMS; wherein the plurality of fixed units having at least ten EFMS, wherein the at least ten EFMS are all located within a 10 mile radius, and thereby define a nodal area; wherein the plurality of fixed units having at least ten EFMS, wherein the at least ten EFMS are all located within a 5 mile radius and thereby define a nodal area; wherein the plurality of fixed units having at least five EFMS, wherein the at least five EFMS are all located within a 1 mile radius and thereby define a nodal area; wherein the predictive information is specific to the nodal area; wherein the predictive information is specific to the nodal area; and, wherein one or more of the mobile devices is associated with the nodal area; wherein the predictive information is specific to the nodal area; wherein one or more of the mobile devices is associated with the nodal area; and wherein the nodal area specific predictive information is communicated to the mobile devices associated with the nodal area; wherein the predictive information is specific to the nodal area and is communicated to mobile devices associated with the nodal area; wherein the predictive information is specific to the nodal area; and wherein the specific predictive information comprises a notice to activate the EFMS, and the activation notice appears on a mobile unit associated with the nodal area; wherein the predictive information is specific to the nodal area; and wherein the specific predictive information comprises a notice to activate the EFMS; and wherein the EFMS is automatically activated by the system; wherein at least one of the mobile units is configured for, and thereby in, direct communication with one or more predetermined unit, thereby defining a group; wherein at least one of the mobile units is configured for, and thereby in, direct communication with one or more predetermined unit, thereby defining a group; and wherein the group is associated with a nodal area; wherein at least one of the mobile units is configured for, and thereby in, direct communication with one or more predetermined unit, thereby defining a group; and wherein the group is associated with a nodal area, wherein the nodal area comprises an EMFS as a unit; wherein at least one of the mobile units is configured for, and thereby in, direct communication with one or more predetermined unit; thereby defining a unit to unit communication pathway; and wherein at least one of the mobile units is configured for, and thereby in, direct communication with one or more predetermined unit; thereby defining a unit to unit communication pathway; wherein the unit to unit communication pathway is private; and a controller in control communication with an external file management system, the controller comprising a processor, a memory and a hydration plan control commands.
Yet further, there is provided these systems and methods having one or more of the following features: wherein at least one of the mobile units is configured for, and thereby in, direct communication with one or more predetermined unit; thereby defining a unit to unit communication pathway; wherein the unit to unit communication pathway is private; and wherein the unit to unit communication pathway includes a nodal area, a predetermined group, or both; wherein at least one of the mobile units comprises a GUI configure to display at least one of the functionalities: a fire locations; I see fire; fire; heavy smoke; embers; fire danger; no fires in area; smoke in area; fire in area; fire nearby; track a wildfire; hotspots; wherein at least one of the mobile units comprises a GUI configure to display at least one of the functionalities: emergency management alert; fire department alert; wildfire distance alert; and fire emergency checklist; and, wherein at least one of the mobile units comprises a GUI configure to display at least one of the functionalities: EFMS status; EFMS system ready; EFMS sprinklers; activate systems; fire department alert; wildfire distance alert; and fire emergency checklist.
In addition, these systems and methods having one or more of the following features: wherein the information or data comprises one or more of a location of a fire, a location of smoke, a location of embers, a direction of movement of a fire, and an evacuation route; wherein the fixed units comprise a GUI; wherein at least one of the plurality of mobile units comprises a unit selected from the group consisting of a cell phone, a smart phone, a tablet, a lap top computer, a vehicle navigation system; having at least ten EFMS; having at least ten EFMS all located within a 10 mile radius, and thereby define a nodal area; having at least ten EFMS all located within a 5 mile radius and thereby define a nodal area; having at least five EFMS all located within a 1 mile radius and thereby define a nodal area; wherein at least some of the information, data or both is specific to the nodal area; wherein at least some of the information, data or both is specific to the nodal area; and, wherein one or more of the mobile devices is associated with the nodal area; wherein the information, data or both is specific to the nodal area; wherein one or more of the mobile devices is associated with the nodal area; and wherein the nodal area specific information, data or both is communicated to the mobile devices associated with the nodal area; wherein the information, data or both is specific to the nodal area and is communicated to mobile devices associated with the nodal area; wherein the information, data or both is specific to the nodal area; and wherein the specific information, data or both comprises a notice to activate the EFMS, and the activation notice appears on a mobile unit associated with the nodal area; wherein the predictive information, data or both is specific to the nodal area; and wherein the EFMS is automatically activated by the system; wherein at least one of the mobile units is configured for, and thereby in, direct communication with one or more predetermined unit, thereby defining a group; and, wherein at least one of the mobile units is configured for, and thereby in, direct communication with one or more predetermined unit, thereby defining a group; and wherein the group is associated with a nodal area.
Furthermore, there is provided these systems and methods having one or more of the following features: wherein the mobile unit is configure so that raw data is inputted by a user of the mobile unit; wherein the raw data is automatically obtained from a sensor associated with the mobile unit; wherein the data processing assembly is configured to provide predictive information to one or more of the first mobile device, the second mobile device and the EFMS; wherein the predictive information is an activation command provided to the EFMS; wherein the predictive information is an activation of the EFMS provided to the second mobile device; wherein the predictive information is based in part upon raw data from the network; wherein a node of the system is a fixed unit associated with an emergency management HQ; and wherein a node of the system is associated with a system for providing, managing or both insurance claims.
Moreover, there is provided these systems and methods having one or more of the following features: wherein the network is a peer to peer network having a plurality of EFMS control systems in direct communication with each other, using a communication protocol; wherein the network is a peer to peer network having a plurality of EFMS control systems in direct communication with each other, using a communication protocol, wherein the protocol does not require the internet; wherein the network is a peer to peer network having a plurality of EFMS control systems, having a local controller, in direct communication with each other, using a communication protocol, wherein the protocol is a peer-to-peer network protocol, wherein the protocol is LoRa; and wherein the network is a LoRaWAN® network architecture having a plurality of EFMS controllers in direct communication with each other, using a communication protocol, wherein the protocol LoRa.
The present inventions relate to networks, systems and the providing of derived data, predictive information, and adaptive strategies for use in multivariable component systems and activities, and in particular, for use in wildfire mitigation, management and suppression, including wildfire emergency response management. In particular, the present inventions relate to systems, networks and methods that provide derived data, predictive data, adaptive strategies, virtual data and combinations and variations of these, for multivariable component systems, such as for use in wildfire mitigation and management and suppression, including wildfire emergency response management.
More particularly, in embodiments, the present inventions relate to systems, equipment and networks for the monitoring and collecting of raw data regarding wildfire responses, real time, historic and both. This raw data is then analyzed to provide derived data, predictive data, adaptive strategies, virtual data, and combinations and variations of this data, which depending upon the nature of this data may be packaged, distributed, displayed and used in various settings and applications.
Embodiments of the present inventions relate to systems, equipment and methods for the monitoring, control and management of hydration levels in the area surrounding a structure for the prevention, mitigation and management of wildfires. In preferred embodiments, the hydration levels are determined, established or maintained for predetermined areas surrounding a structure. Further, embodiments of the present inventions include predetermined hydration plans, including, plans based upon raw data, derived data, predictive data, adaptive strategies, virtual data, and combinations and variations of this data.
In general, embodiments of the present inventions include embodiments of an EFMS that have hydration plans, and in particular predetermined hydration plans, that are a part of the system, and in particular, a part of the control system. The hydration plan, is a protocol or method of operation for the EFMS, that is operated by a series of control commands in the control system. Thus, the hydration plan can be contained in the control system (e.g., in, as a part of, or in control communication with the controller for the EFMS) and is contained in that system, or resides in that system, as hydration plan control commands, i.e., as a computer program, controller commands; algorithm, set of computer instructions and the like. The hydration plan can be stored and updated in the cloud, can be stored on local controllers and updated from the cloud, can be locally updated and combinations and variations of these. The hydration plan, and the hydration plan control commands, in general monitor the hydration levels of combustible materials in the area around a structure and then activate the EFMS to maintain or manage the hydration levels of those combustible materials to as provided in the hydration plan. Thus, in preferred embodiments the EFMS is in control communication with, or has as part of its control system, hydration plan control commands, and thus is capable of implementing the hydration plan.
In a general, embodiments of an EMFS having hydration plan control commands, for carry out the hydration plan, the EMFS can have and can receive input from devices that directly or indirectly monitor the hydration levels of combustible materials in predetermined areas, i.e., zones, that surround the structure. The devices for monitoring the hydration levels of combustible materials, can include for example: soil moisture sensors; moisture sensors on, or in, vegetation; visual sensors (e.g., color of vegetation); humidity sensors; temperature sensors; data input, memory and processors that can predict or determine hydration levels and hydration trends, and combinations and variations of these and other devices. The zones are primarily configured based upon a predetermined distance from the structure. The zones may also be configured based upon natural fire breaks, fire risk and other geographic or environmental factors.
Thus, there is typically a first, or inner zone, which is adjacent to the structure and extends out from the structure a few feet to yards (meters). There is typically a second zone, which is adjacent to the first zone (or which can be overlapping) and extends outwardly from the first zone further away from the structure by a few feet to a few yards (meters). In the two-zone embodiment, the second zone would be the outer zone. There can also be a third zone, in which case, the second zone would be considered the middle zone, and the third zone would be considered the outer zone. The third zone would be adjacent to the second zone (overlapping or not over overlapping) and extends outwardly from the second zone further away from the structure by a few feet to a few yards (meters). Additional, zones extending further away from the structure may also be used.
Generally, the hydration plan, and hydration plan control commands, can have predetermined, derived or both, hydration levels for each zone, and then operate the EFMS to maintain those hydration levels. The hydration levels for each zone can be the same or different. The hydration levels can be varied based upon for example: season, weather conditions, and wildfire information and data. Thus, for example, the hydration levels for each zone can be: (i) predetermined, e.g., a higher level of hydration during fire season, e.g., higher hydration level in inner zone, or both zones; (ii) they can be determined by the control system based upon incoming data, e.g., active fire near structure, which would increase hydration levels in both inner and outer zones, or inner zone first, then outer zone, if/as fire approached; (iii) user input, e.g., setting a desired hydration level, e.g., higher, hydration level for one or more zones; (iv) local zoning, water use requirements, including water use requirements during an active fire event; (iv) based upon derived data, e.g., fire risk conditions calculated based upon real time raw data; and (v) combinations and variations of these, as well as other factors.
In general embodiments of these EMFS having a hydration plan and the hydration plan method, e.g., the hydrating of the surrounding combustible materials in the areas or zones surrounding the structure, can be configured to remotely protect structures during a wildfire. The system has a source of data that identifies or defines an area around a structure and provides the hydration level of combustibles around that structure and in the area.
The area can be a series of areas, with each area having a periphery that extends out further from the structure. In this manner the amount of hydration of the combustible material in each of these areas is provided.
These areas could be concentric, e.g., concentric circles, squares, ovoids or rectangles. These areas can be based upon the shape, e.g., foot print, of the structure, and thus extend outwardly from that foot print by a set distance, and thus the shape of the area would be a larger but similar shape foot print to the structure. These areas can be any geometric shape with one being located inside the other and having a common center point, or different center points. These areas could be overlapping, and partially overlapping (e.g., along the lines of Venn diagrams). These areas could follow the exact shape of the foot print of the structures, thus being a set distance from each wall. The areas can take into account multiple structures, e.g., garage, shed or coach house. These areas may also be based upon, or shaped, to take into consideration the natural contours of the land around the structure, fire breaks such a highway or rivers, and likely wind patterns, among other natural factors, to further define the shape and size of the areas. These areas can use one or more, and combinations and variations of the foregoing shapes and arrangements.
The areas can also be determined based primarily upon the amount of hydration of the combustibles around the structure. Thus, in periods when the combustibles are very dry, i.e., low levels of hydration (less than 50% water content, less than 25% water content, less than 10% water content, and less than 5% water content) the area can be expanded to provide a large area around the structure for mitigation and monitoring purposed.
The areas can be hydrated based upon specific amounts of water being applied to the area or zone. Thus, Home Ignition Zone 0 (HIZ0), which is adjacent to the structure, i.e., the inner zone or area, can have a primary hydration amount of: about 2″ of water per 24 hour period; about from 1″ to about 2″ of water per 24 hour period; about 0.7″ to 1.2″ of water per 24 hour period; and, preferably for an HIZ0 having distance from the structure of 5 feet, 1″ of water per 24 hour period.
The next zone away from HIZ0, and adjacent to HIZ0, which is HIZ1, (outer zone for two zone embodiment, middle zone for three zone embodiment) can be hydrated based upon specific amounts of water being applied to the area or zone. Thus, Home Ignition Zone 1 (HIZ1), which is adjacent to HIZ0 can have a primary hydration amount of: about 1″ of water per 24 hour period; about from 0.5″ to about 1.2″ of water per 24 hour period; about 0.3″ to 0.8″ of water per 24 hour period; about 0.1″ to 0.3″ of water per 24 hour period; and preferably for an HIZ1 having distance from the structure that is adjacent to HIZ0 (e.g., 5 feet from the structure) and extends out to 30 feet from the structure, 0.25″ of water per 24 hour period.
After the primary hydration amount is applied, it is preferable that a replenish amount of water is applied to the area or zone, and that this is applied daily during dry conditions, red flag warnings, high fire risk conditions, and combinations and variations of other factors.
Thus, for HIZ0, for each 24 hour period following the primary hydration, a replenishment hydration amount of: about 1″ of water per 24 hour period; about from 0.3″ to about 0.8″ of water per 24 hour period; about 0.4″ to 0.9″ of water per 24 hour period; and preferably for an HIZ0 having distance from the structure of 5 feet, 0.5″ of water per 24 hour period. These others factors can be received, determined or both from data and information provided to the control system for the EFMS having a hydration plan.
Thus, Home Ignition Zone 1 (HIZ1), which is adjacent to HIZ0 can have a replenishment hydration amount of: about 0.4″ of water per 24 hour period; about from 0.1″ to about 0.4″ of water per 24 hour period; about 0.10″ to 0.25″ of water per 24 hour period; and preferably for an HIZ1 having distance from the structure that is adjacent to HIZ0 (e.g., 5 feet from the structure) and extends out to 30 feet from the structure, 0.13″ of water per 24 hour period.
The level of hydration that is maintained in the various zones, e.g., HIZ0, HIZ1, HIZ2, etc. can be measured by Fuel Moisture Content (“FMC”). Fuel moisture content is the percentage of a given fuel's weight, represented by water, based on the dry weight of the fuel. Thus, it is: Percent Moisture Content=Weight of Water/Oven-dry Weight of Fuel×100. It is noted that moisture content can be greater than 100 percent because the water in a fuel particle may weigh considerably more than the dry fuel itself. For example, a green leaf may contain three times as much water as there is dry material, leading to a moisture content of 300 percent. Moisture content of duff and organic soil can be over 100 percent. In embodiments the EFMS establishes and maintains a FMC in HIZ0 from about 100% to about 400%, from about 200% to about 300%, about 100% or more, about 200% or more and about 300% or more. The EFMS establishes and maintains an FMC in HIZ1 from about 100% to 300%, from about 70% to about 150%, about 75% or more, about 100% or more, and about 150% or more. The EFMS establishes and maintains an FMC in HIZ2 from about 25% to 100%, from about 30% to about 50%, about 50% or more, about 60% or more, and about 100% or more. Combination and variations of these established and maintained FMCs may be utilized, as well as, higher and lower amounts.
Further, the hydration plan, and the hydration plan control commands, can be configured to keep combustibles wet enough so that an ember attach will not ignite them. For example, the ignition point for dry grass and leaves is about 13.6 MJ/m2, the ignition point for dry cushions and dry fabric (e.g., yard furniture) is about 7.5 to 19.7 MJ/m2, and the ignition point for dry pine wood is about 18.1 MJ/m2. The energy from a typical ember attack is about 52.2 MJ/m2. In general, a preferred hydration plan will keep these materials saturated. The plan will account for hydration time (e.g., about 20 hours for wood to become saturated) amount of water needed for saturation, and evaporation. For example, about 43 gallons/100 sq ft (e.g., 62 inches of water) can be used to keep these materials saturated, under certain conditions. However, it is preferred to have a safety factor and thus use 62 gal/100 sq ft (e.g., 1 inch of water) By saturating these materials, as well as, other materials, their ignition point is raised, i.e., it takes more energy for them to ignite. It requires about 65.9 MJ/m2 to heat and evaporate 1 inch of water. Thus, when these materials are saturated their ignition points are above the energy from an ember attack, and thus the amber attack will not ignite them. For example, saturated pine wood has an ignition point of 62.6 MJ/m2, which is well above the 52.2 MJ/m2 from a typical amber attack Moreover, if the area surrounding the structure is saturated, any spot fires that may occur should be self-extinguishing.
The control system can receive information about evaporation, calculate evaporation rates based upon data, used historic data, use real time data, and combinations and various of these to determine the amount of water needed in the hydration plan to compensate for evaporation. In extreme conditions materials can lose 0.5 inches of water per day. Typical California summers see water loose from evaporation of about 0.25 inches per day. Thus, the hydration plan can be based upon, e.g., designed to compensate for, these typical evaporation rates, preferably with a safety factor added in, e.g., 50%.
Embodiments of the hydration plans can limit the flow rate to about 24 gpm. Generally, the hydration plan will provide for periods on operation, e.g., cycles, and then periods on no operation. In embodiments hydration maintenance cycles can use about 2.5 gpm, and initial hydration cycles can use about 5 gpm.
In an embodiment the primary (e.g., initial) and replenish (e.g., maintenance) amounts of hydration for HIZ0 and HIZ1 are such that there is no need to apply water to HIZ2.
The data and information about the amount of hydration in the combustibles surround the structure can come from any available source. Moisture sensors can be located around the structure. The moisture sensors and hydration system can be of the type used for agriculture to monitor crops. It can contain moisture sensors located in the ground, or at or near the ground to determine moisture levels, and hydration levels of combustibles.
The data and information about the amount of hydration in the combustibles can also come from historic data. In this manner hydration levels based upon prior weather conditions can be analyzed and used to predict, and provide a derived hydration levels based upon current conditions. Optical sensors may also be employed to determine hydration level based upon color or visual condition of the combustibles.
The data and information about the amount of hydration in the combustibles can also come from publicly available sources, such as the depart of agriculture, local fire management systems, and weather and climate services.
The data and information about the amount of hydration in the combustibles can come from adjacent structures and other monitoring systems.
The data and information about the amount of hydration, from one, more than one, and all of these as well as other sources, is used by the EMFS for several purposes. The EMFS system, using the hydration plan control commands, can determined the amount of water needed to increase the hydration level in one or more of the areas around the house to an acceptable level. The EMFS can evaluate, one or more of, the amount of available water, predicted weather patterns, fire hazard level and other factors, to determine and implement a hydration plan, e.g., amount, time, duration, and location, of sprinkler usage to obtain an optimum hydration level based upon one or more and all of these factors.
The evaluation of the hydration data and information, and the formulation of hydration plans can be done by the EMFS systems at a local control and processing system, it can be done by a remote control and processing system, it can be done by a distributed control and processing systems and combinations and variations of these.
The hydration data and information can also be used by the EMFS system to determine the amount, duration and time of the application of fire suppressions materials, e.g., water, foam, when a fire is detected. In this manner, the minimal amount of fire suppression material can be used that are necessary, based upon hydration data and information, to suppress the fire and protect the structure.
Turning to
The fire emergency communication system 100 has several nodes or communication points, each node or communication point having one or more receiving device, monitoring device, transmitting device and combinations and variations of these. There is a node 110 that is associated with a residential area, e.g., a nodal area. There is a node 105 that is associated with a rural area, e.g., a nodal area. There is a node 103 that is associated with an area having access to a limited access highway, e.g., an intersection nodal area. There is a node 104 that is associated with an urban area, e.g., an urban nodal area. Each of these nodes, also has a number of individual nodes within, or associated with them. The individual nodes within a node, form a nodal area, nodes that are mobile can move from one nodal area to another nodal area.
It is understood, that one, tens, and hundreds of nodal areas, each having one, tens and hundreds of nodes, can be associated with the communication system 100, and network 101. Moreover, multiple networks, such as network 101, can be associated with, or a part of, the communication system 100.
The number and types of nodal areas may vary, from situation to situation, community to community, from public services team/organization to public services team/organization and may vary before, during and after a wildfire.
The number and types of individual nodes, in any given nodal area, may vary, from situation to situation, community to community, from public services team/organization to public services team/organization and may vary before, during and after a wildfire.
In the embodiment of
Further these nodes may be viewed as sub-nodes of a larger node. For example fire emergency communication system 101 could be included as a sub-node in a larger communication network, having one, tens, hundreds of similar fire emergency communications systems.
The individual nodes typically and preferably have GUI. They may have associated keyboards, key pads, touch screens, voice control, etc., and combinations and variations of these. The GUI have displays that among other things have graphics for providing information about traffic, fire location, evacuation, evacuation routes, location of gas stations, location of first responders, as well as, the ability to have user input of real time data, e.g., user location, presence of ambers, visibility, proximity to fire, traffic conditions. Preferably, icons, windows or screens are provided on the GUI by an application (app) that is loaded onto a mobile device, such as a smart phone, tablet or vehicle GPS/navigation system. The GUI may also be configured to provide real time, historic, derived, predictive, and virtual data. The GUI may be configured to have private access on the then network to another node on the network. For example, mobile device 140 may have a private communications path with dwelling 112, enabling mobile device to display real time raw data (e.g., images, temperature) of the conditions around dwelling 112 and send instruction to dwelling 112. For example, to activate a fire suppression system for dwelling 112. The monitoring unit of dwelling 112 may also have a processor, or be in communication (control communication) with the processing system to automatically activate the fire suppression system for dwelling 112, sent notifications to mobile device 140 recommending activation of the fire suppression system for dwelling 112, as well as, sending notice that the fire suppression system has been activated. The notices may also be broadcast over the entire network, only to the area where the node or dwelling is located, only to first responders (e.g., emergency services, fire, police, ambulance etc.) and combinations and variations of these.
The network 101, has several communication pathways. These pathways may be over the same routes, or portions of the network 101, they may share some but not all routes, they may be totally separate, and combinations and variations of these. Each route or pathway may have its own proprietary communication protocol, it may use a publicly available protocol. The protocols may include, but are not limited to CoAP, MQTT, AMQP, WAMP, LoRAWAN, LoRa, IPv4, or IPv6. The communication, e.g., the data and information set over the pathway may be encrypted, protected, or otherwise encoded, such that only an intended recipient can receive it, for example a predetermined recipient, e.g., an individual who has taken the necessary steps to rightfully receive information and data from the data processing assembly 139.
Each individual node preferably has the ability to receive and transmit data and information. However, a node only needs the ability to receive or transmit data or information. For example, in some embodiments of monitoring stations they may only transmit data and information.
Turning to the residential area 110, there is shown a schematic representation of an example of a residential area. (The residential area may be a part of, adjacent or far removed from the other areas in the system.) The residential area 110 has street 111. The various node in this area each have communication pathways: dwelling 112 has communication pathway 112a, mobile device 115 has communication pathway 115a, mobile device 116 (which is in dwelling 114) has communication pathway 116a, first responder 117 has communication pathway 117a, school 118 has communication pathway 118a. In addition, dwelling 114 has a private security system that has a communication pathway 114a to a private security provider. As discussed below, such nodes, e.g., 114, can be brought into the system 100, by the private security provider feeding, i.e., providing or transmitting, data and information from its network or customers to the processing system 139.
Turning to the rural area 105, there is shown a schematic representation of an example of a rural area. (The rural area may be a part of, adjacent or far removed from the other areas in the system.) The rural area 110 has winding, narrow country road 107, a large area 108 (shown by dotted line) that contains significant fuel sources for a wildfire, and power lines 106. The various nodes in this area each have communication pathways: first responder unit 120 has communication pathway 120a, monitoring station 121 has communication pathway 121a, dwelling 122 has communication pathway 122a, cell tower fixed data collection and transmission device 137 has communication pathway 137a, and monitoring station 138 has communication pathway 138a. And, airport 125, which is adjacent to residential area 110 and rural area 105 has communication pathway 125a,
Turning to the limited access highway area 103, there is shown a schematic representation of an example of a limited access highway and its surroundings. (The limited access highway area may be a part of, adjacent or far removed from the other areas in the system.) The limited access highway area 103 has a multilane limited access highway 131 having multiple on and off ramps, e.g., 132, and a street 130. The various nodes in this area each have communication pathways: monitoring station 136 has communication pathway 136a, mobile device 140 has communication pathway 140a, and first responder 133 has communication pathway 133a.
Turning to the urban area 104, there is shown a schematic representation of an example of an urban area. (The urban area may be a part of, adjacent or far removed from the other areas in the system.) The urban area 104 has a street 141 that intersects street 142. The various nodes in this area each have communication pathways: traffic camera/red light camera 151 has communication pathway 151a. And a fixed data collection and transmission device (e.g., positioned on or with a cell tower 152) adjacent to the urban area 104, has communication pathway 152a. In addition, business 150 has a private security system that has a communication pathway 150a to a private security provider. As discussed below, such nodes, e.g., 150, can be brought into the system 100, by the private security provider feeding, i.e., providing or transmitting, data and information from its network or customers to the processing system 139.
Emergency Management (head quarter, command center, etc.) 143, has communication pathway 143a, police department 144 has communication pathway 144a, fire department 145 has communication pathway 145a, ambulance service 146 has communication pathway 146a, and hospital 147 has communication pathway 147a.
The network 101 has pathway 102 that connects the network to processing system 139 (as shown in greater detail in
The network 100 can have multiple private pathways. For example, a dwelling can have an external fire protection system that has a control system, sensors, actuators and communication pathway. This external fire protection system has a private communication pathway with processing system 139, as well as, with one or more mobile devices that also connect to processing system 139 and directly or through the processing system to the control system of the dwelling's fire protection system. There may be tens, hundreds or more of these private pathways. As the processing system 139 receives more data and information it can determine if recommendations to start a particular dwelling's fire protection system should be sent, or if the command to start the system should be sent. This can also be done on an area by area basis.
Thus, for example, the processing system 139 is receiving real time raw data from multiple nodes in the network that provide real time information about, for example traffic patterns, location of fire, speed of fire, direction of movement of the fire, wind speed and direction, humidity, number and location of persons, location of first responders. The processing system 139 also has access to historic data, such as prior weather, prior fire patterns, prior traffic patterns, surveys of fuel sources for the fire, and geographic terrain. The processing system using the real time raw data, and preferably, but not necessarily, the historic data can provide derived data about fire movement, traffic patterns, resource allocation, preferably this derived data can be predictive data. Different forms, and types of this derived data and predictive data can then be transmitted out onto the network to different nodes. For example, the information a mobile device may receive could be limited to the status of a fire suppressions system linked to that device, the proximity of the fire, the predicted path of the fire, traffic and suggested evacuation routes. The information provided to first responders and emergency management HQ could be far more extensive. For example, historic data about the number of dwellings having external fire suppression systems in a particular area, the fuel sources in that area, coupled with real time raw data about the number of people in that area, could be used to determine the placement of first responders, and the need for evacuations.
Nodes, nodal areas, individual nodes may be organized and configured into various sub-nodes. These sub-nodes can be private or semi-private or public. For example, a company could have a private sub-node for its employees, and within that a sub-node for its fleet of vehicles. Similarly, a school could have a sub-node for its children and parents. A sub-node could include all of the nodes that are external fire management systems, and then have sub-nodes for particular types of system, e.g., by provider, level of services, etc.
Turning to
Unit 199 receives and provides information, data and control communication to and from the data processing system 190 to the network 101. Data to individuals is sent along pathways 180 for standard data and content, and along path 181 for premium data and content. For example, standard data may show only public service announcements and other official information from the authorities. Premium data, can show predicted fire movement, number and location of external fire management systems (and their status over time).
Both of these individual data streams, sets or packets, e.g., data for individuals, travels along pathway 102 of network 101. This data for individuals travels along pathway 102 to a smart phone, tablet, such as an iPad®, a GUI in an automobile (dash display), or other GUI, where one or more of raw data, derived data, adaptive strategy information and predictive data are presented on the display. Thus, for example, data may travel along pathway 181 to pathway 102 to one or more individual pathways (e.g., 113a) or to a nodal area, e.g., 110, or the entire network. The data is then displayed on the GUI associated with the node (e.g., 113) and information may be input into the GUI and then transmitted along the individual pathway to the network pathway 102, to a pathway, e.g., 181.
The other pathways from unit 199, e.g., pathway 182, 184, 186, etc., are for other custom or special communication or sub-networks. Thus, by way of example, pathway 182 can be for controlled communication for external fire management systems. Realtime raw data, derived data, adaptive strategy information and predictive data may be sent to a user's mobile node, a fixed node on the external fire management system and both. The user can then monitor the information and elect to send a command to the external fire management system to, for example, become read, to operate, or to operate upon a certain set of conditions. The system 139 can send predictive data, e.g., recommending that the external fire management system is activated. The system 139 can also send information, data, or a command to one or more external fire management systems that cause the system(s) to operate.
In this manner the system 139 can provide derived data and adaptive strategies, to individuals and entire areas, in a direct response to changing fire conditions. This provides the ability to save fire suppression resources (i.e., water, foam) until they are absolutely needed, to use them in the most efficient manner, both on a micro level (each individual system, or structure) and on a macho level, (most efficient use of systems, and activation/operation strategy to protect an area).
By way of example, pathway 184 can be non-public and exclusive to fire response teams. Pathway 185 can be non-pubic and exclusive to all first responders. Pathway 183 is for communication with network television and social media. This pathway allows specified data and information from the system 139 to be broadcast to a GUI 186, e.g., a TV or computer monitor, on public networks and social medial.
Generally, the sources for incoming raw data for use in, or to form a basis for, the algorithms and mathematical computations that a processor performs to provide derived data and predictive information and adaptive strategies, can come from various sources, including for example: individual mobile devices (e.g., input from persons, first responders, emergency services, satellites), fixed monitoring devices (e.g., cell tower mounted devices, external fire suppression system, fire services, weather services, traffic monitors, first responders, emergency services, etc.).
Because of the complexity and unpredictability of wild fires, fire emergency and the reactions of persons, although a single approach may be used, in an embodiment a multi-approach system approach is used, the multi-approach having two, three, four or more approaches performed at the same time to determine a set of approach values for a given event at a given point in the fire emergency. These approach values, e.g., probability of event occurring, are then given weightings based upon their individual accuracy for a particular point in the fire emergency, e.g., rural fire, fire size, population levels, population density in relation to ingress and egress routes, start (activation) of an external fire management system, number of EFMSs in a location, etc. The weighted approach values are then combined to provide a predicted value, i.e, derived data of a predictive nature, such as for example an adaptive strategy, a recommendation to activate a particular EFMS, a warning to evacuate, etc.
Generally, the EFMS, such as the systems in
Turning to
The time T, 325, or provided 326) when the prediction of even 300 is possible to occur is then selected by an individual, e.g., emergency services person, home owner, school principal, etc.
Weighting factors X, X′, X″ based upon T are then applied to the predicted values 311, 312, 313 to render weighted predicted values 321, 322, 323. Preferably the weighting facts are predetermined 326 for each value of T, or they may be determined based upon predetermined parameters at the time of use. The weight values can be any integer, or fraction. The weighted predictive values 321, 322, 323 are then combined to provide a predicted value 340 for event 300 at time Z, e.g., 80% chance that fire reaches “Shady Acers” in the next 90 minutes. The resulting predicted value 340 is then transmitted to, accessible by and combinations and variations of these a network (e.g, 101) of fire emergency communication system (e.g., 100)
Turning to
The statistical approach 401 uses real time raw data, real time derived data and historical derived data in an appropriate probability distribution, such as a gamma probability distribution, beta-binomial probability distribution, standard normal probability distribution, beta probably distributions, or the Dirichlet probability distribution. Thus, for example approach 401 can use current fire position, current humidity, current wind speed, and current wind direction, to project the probability of the fire reaching location A, over a period of time ΔT into the future.
The time T, 425, when the prediction of even 444 is possible to occur is then selected by an individual, e.g., emergency services person, home owner, school principal, etc.
Weighting factors X, X′, X″ based upon T are then applied to the predicted values 411, 412, to render weighted predicted values 421, 422. Preferably the weighting facts are predetermined 426 or each value of T, or they may be determined based upon predetermined parameters at the time of use. The weight values can be any integer, or fraction. The weighted predictive values 421, 422 are then combined to provide a predicted value 440 for event 444 at time Z, e.g., 80% chance that fire reaches “Shady Acers” in the next 90 minutes. The resulting predicted value 440 is then transmitted to, accessible by and combinations and variations of these, a network (e.g, 101) of fire emergency communication system (e.g., 100)
As ΔT becomes larger the uncertainty around probability value 411 increases. Thus,
The deterministic model approach 402 has higher certainty in predicting events that are not as far out into the future, i.e., smaller ΔT values. In particular the deterministic model approach 402 has greater certainty of its values as larger amount of data are acquired from the fire emergency.
Other forms of derived data use generalized machine learning algorithms such as Support Vector Machines to predict or classify fire emergency events. These predictions or classifications are forms of derived data. One possible prediction is the probability that a fire will jump a highway or natural barrier. Support Vector Machines may be trained on historical data to create a classifier that can predict the probability that fire will behave in a certain manner.
Inferential techniques can be used to determine traffic patterns and availability of ingress and egress routes. These techniques would take as input raw data and/or other pieces of derived data. Inference could be performed, for example, via use of heuristics based on traffic pattern knowledge, real time traffic information from waze, google maps etc., or statistical techniques for pattern recognition.
In some uses, derived and predictive data and virtual data are displayed to users through a client, e.g. a web browser. These data are sent to the client from a server, or from other clients. In some situations, the client will request new data constantly because it is difficult to know if a particular piece of data has been updated. Preferably, the client and/or server is able to determine which data are likely to have changed at a point in time, and therefore prioritize the communication of data that are likely to have changed. This scheme decreases unneeded communication between clients or between clients and servers. The server may determine that particular data are likely to have changed and push that data to the client, or the client may determine that particular data are likely to have changed and request those data from another client or a server.
The following Examples are provided to illustrate various embodiments of systems, devices, methods, and uses and displays of derived, predictive “adaptative strategies and virtual data. These Examples are for illustrative purposes, may be prophetic, and should not be view as, and do not otherwise limit the scope of the present inventions.
The controller 580 of Example 1A is in control communication with a hydration plan control commands. These control commands can reside entirely in the controller 590 (e.g., the memory associated with the controller and be executed by the processor in the controller), they can reside in the cloud and be executed by a cloud based processor, they can be distributed between the cloud and the controller 580, i.e., between the cloud and the local controller. The hydration plan control commands provide for the system to operate and implement a hydration plan.
The hydration plan control commands, and thus the hydration plan which they provide, can be updated, for example, via the cloud, via the network, locally and combinations and variations of these.
The control system sends control commands to activate and operate the EMFS, sends commands to a local controller to activate and operate the EMFS and combinations and variations of these depending upon the net work and controller configuration. These control commands, among other things, start and stop the operation of the EMFS, thus these commands determine, among other things, the number of cycles, time between cycles, duration of a cycle, as the hydration plan is carried out through the operation of the EFMS. The stop commands, i.e., deactivate and stop operation of the EFMS can be based upon a timer, monitored hydration levels, as well as, other factors.
The EFMS and devices of US Patent Publication 2019/0262637, the entire disclosure of which is incorporated herein by reference, form a node or nodes on the fire emergency communications system. One, two, ten or more structures in an area can have these EFMS.
An emergency management control network and system, e.g., the embodiment of
Turning to
The anonymous browsing that is accessed through screen 603 can be for example:
The free version of the application that is accessed through screen 604 can be for example:
The premium version of the application that is accessed through screen 606 can be for example:
The system owner version of the application that is accessed through screen 607 can be for example:
Turning to
Turning to
Turning to
Turning to
Turning to
Turning to
Screens and functionality for a unit functioning as an anonymous user on a node on the network can have access to and show maps, of the area, and these maps can contain information such as fire location, predicted path of fire, location of first responders, evacuation routes, etc. These screens are available to premium users and systems owners, and can also be available to free users.
Turning to
System 1200 provides an outer coverage zone 1201 that has an outer boundary 1221. The outer boundary 1221 is 30 ft from the walls 1224 of the house. The system 1200 provides an inner coverage zone 1220, that has an inner boundary 1222. Boundary 1222 is 5 ft from the walls 1224. The system 1200 has distribution heads 1202, 1203, 1204, 1205, 1206, 1207, 1208, 1209. When the system is activated, these distribution heads provide foam, water and combinations of foam and water to zone, 1220, zone 1201, and combinations and variations of these zones. The system is installed in a house that has an outer roof line 1203, that extend outwardly from the outer walls 1224, and thereby defines an eave. The zones 1201 and 1220 can be further subdivided into sub-zones. In this manner the system can be operated to provide water, foam, etc. to various sub-zones and combinations of sub-zones.
In an embodiment the inner boundary 1222 can be about 4 feet or about 3 feet from the walls 1224, as well as, more than 5 ft, about 6 ft, and less than 8 ft from the walls 1224. In an embodiment the outer boundary can be about 25 feet or about 20 feet from the walls 1224, as well as, more than 30 ft, about 35 ft, and less than 50 ft from the walls 1224.
In an embodiment there is provided an EFMS 1300 of the type shown in
Turning to
Turing to
Either or both of the controllers of Example 15 are in control communication with hydration plan control commands. These control commands can reside entirely in one or both of the controllers (e.g., the memory associated with one of the controllers and be executed by the processor in the controller), they can reside in the cloud and be executed by a cloud based processor, they can be distributed between the cloud and the controllers, i.e., between the cloud and the local controllers. The hydration plan control commands provide for the system to operate and implement a hydration plan.
The hydration plan control commands, and thus the hydration plan which they provide, can be updated, for example, via the cloud, via the network, locally and combinations and variations of these.
The control system sends control commands to activate and operate the EMFS, sends commands to a local controller to activate and operate the EMFS and combinations and variations of these depending upon the net work and controller configuration. These control commands, among other things, start and stop the operation of the EMFS, thus these commands determine, among other things, the number of cycles, time between cycles, duration of a cycle, as the hydration plan is carried out through the operation of the EFMS. The stop commands, i.e., deactivate and stop operation of the EFMS can be based upon a timer, monitored hydration levels, as well as, other factors.
Turing to
Either or both of the controllers of Example 16 are in control communication with hydration plan control commands. These control commands can reside entirely in one or both of the controllers (e.g., the memory associated with one of the controllers and be executed by the processor in the controller), they can reside in the cloud and be executed by a cloud based processor, they can be distributed between the cloud and the controllers, i.e., between the cloud and the local controllers. The hydration plan control commands provide for the system to operate and implement a hydration plan.
The hydration plan control commands, and thus the hydration plan which they provide, can be updated, for example, via the cloud, via the network, locally and combinations and variations of these.
The control system sends control commands to activate and operate the EMFS, sends commands to a local controller to activate and operate the EMFS and combinations and variations of these depending upon the net work and controller configuration. These control commands, among other things, start and stop the operation of the EMFS, thus these commands determine, among other things, the number of cycles, time between cycles, duration of a cycle, as the hydration plan is carried out through the operation of the EFMS. The stop commands, i.e., deactivate and stop operation of the EFMS can be based upon a timer, monitored hydration levels, as well as, other factors.
In embodiments the systems, e.g., an EFMS, the second controller of a two controller embodiment, such as the embodiment of Examples 15, 15A, 16, and 16A the servers and processors in the cloud (e.g., API) can perform, require or both, validations before an EFMS is activated to disperse water, foam or both. Thus, if information is received indicating that a fire is near by the structure, this information held, and then validated with other information to confirm the accuracy of the initial information. One, two, three or more validations can be performed before an activation. Because these systems can have a large number of related inputs, the time for this validation will be very short. For example, less than 1 minute, less than 30 seconds, less than 15 seconds, less than 10 second. Moreover, this information can be stored and shared between EMFSs, the API, or other memory devices. This information will be location based. Thus, in this manner, in an embodiment, the validations can take place in even shorter periods and time, and essentially be instantaneous.
Either or both of the controllers of Example 17 are in control communication with hydration plan control commands. These control commands can reside entirely in one or both of the controllers (e.g., the memory associated with one of the controllers and be executed by the processor in the controller), they can reside in the cloud and be executed by a cloud based processor, they can be distributed between the cloud and the controllers, i.e., between the cloud and the local controllers. The hydration plan control commands provide for the system to operate and implement a hydration plan.
The hydration plan control commands, and thus the hydration plan which they provide, can be updated, for example, via the cloud, via the network, locally and combinations and variations of these.
The control system sends control commands to activate and operate the EMFS, sends commands to a local controller to activate and operate the EMFS and combinations and variations of these depending upon the net work and controller configuration. These control commands, among other things, start and stop the operation of the EMFS, thus these commands determine, among other things, the number of cycles, time between cycles, duration of a cycle, as the hydration plan is carried out through the operation of the EFMS. The stop commands, i.e., deactivate and stop operation of the EFMS can be based upon a timer, monitored hydration levels, as well as, other factors.
An embodiment of the present networks and systems can be configured and implemented to manage a hurricane emergency.
In an embodiment, enhancements in speed can be achieved by inter controller communication on the network. For example, one controller can let another controller know that it has activated, and if a second controller lets other controllers know it has been activated, then there is logic that can be applied to activate the controller receiving the activate information. The communication path for communicating between controllers does not need to be via the cloud, but rather through radio communication, such as a LoRa type system, including LoRaWAN®.
An embodiment of an EMFS, systems of Examples 15, 15A, 16 and 16A uses a LoRaWAN® network architecture. In an embodiment this architecture is deployed in a star-of-stars topology in which gateways relay messages between end-devices and a central network server. The gateways are connected to the network server via standard IP connections and act as a transparent bridge, simply converting RF packets to IP packets and vice versa. The wireless communication takes advantage of the Long Range characteristics of the LoRaO physical layer, allowing a single-hop link between the end-device and one or many gateways. All modes are capable of bi-directional communication, and there is support for multicast addressing groups to make efficient use of spectrum during tasks such as Firmware Over-The-Air (FOTA) upgrades or other mass distribution messages.
In an embodiment the EMFS, for use in this Example, is for instance one of the type of systems of Examples 15 and 16.
An embodiment of the EMFS system has a UPS of the type shown in
Historic, actual, predictive, and derived hydration level data and information, and combinations and variations of these is used to determine the configuration of an EMFS. In this manner the hydration level data and information can form a basis in whole or part, to determine the number and placement of sprinkler heads, the amount of fire suppression material to be stored in the system.
Predictive hydration level data and information can be used to determined modifications that may be need to existing EMFS, to future, e.g., increased needs of the system to protect the structure. Thus, for example additional sprinkler heads, large capacity storage tanks for foam, could be recommended by the control system, for addition to the system.
Embodiments of the EFMS, including any of the Examples, having one, two, tens, and hundreds, of individual structures and individual EMFS. These systems form a platform as a distributed network and based upon hydration data and information, historic, actual, derived, predicted, and combinations and variations of these, the platform determines optimum strategies for the use of available water to increase hydration levels in a manner that is optimum for the platform.
The embodiments of the EFMS, including any of the Examples provide notifications to individuals, such as on hand held devices, fire crews and emergency management teams. The systems are also configured to receive input and control compunctions from one or more of these groups.
Embodiments of the EFMS, including any of the Examples, are reconfigured and adapted for use with, as a part of, or integrated with, an internal fire suppress systems for the protection of the interior of structures. These internal systems can be integrated with, and preferable are a part of the distributed network of EMFS. The internal systems may rely upon the same source of fire mitigation material as the EMFS for the structure or they may have a completely separate source. Further, there may be a common back up source of fire suppression material that can be used, if needed, by both the EMFS and internal system.
The internal systems can similarly provide and receive information, communication and control communication from users, e.g., home owner, emergency management personal.
A satellite system is configured to provide information to, and to manage embodiments of the EFMS, including any of the Examples.
A system of drones, alone or in conjunction with the satellite system of Example 26, is configured to provide information to, and to manage embodiments of the EFMS, including any of the Examples.
An EMFS system, including any of the Examples, or a separate system, is configured to provide water, or a cleaning solution, to solar panels. These systems can be installed on individual structures, e.g., solar panels on the roof of a house, or they can be utilized to protect large solar energy farms. These systems can be operation, on a timer, but preferably they are operated based upon fire conditions, for example, ash and particulate density in the air (actual, derived from fire conditions and wind conditions, or both).
Turning to
A system 1500 having a hydration plan and hydration control commands is associated with a structure 1501 to be protected from wild fire. The structure 1501 has an EFMS. The EMFS system and its hydration plan establishes a first area (Home Ignition Zone (“HIZ”) 0 (zero), i.e., HIZ0) 1502. The distance 1512 for the permitter of HIZ0 1502 from the outer walls of the structure 1501 can be from about 1 to 20 feet, 10 feet or less, 5 feet or less, and preferably the distance 1512 is about 5 feet. It being understood that HIZ0 is adjacent to, and can include the outer surface of, the outer wall of the structure 1501.
The EMFS system and its hydration plan establishes a second area (HIZ1) 1503. The distance 1513 for the permitter of HIZ1 1503 from the outer walls of the structure 1501 can be from about 5 to 50 feet, 40 feet or less, 30 feet or less, and preferably the distance 1513 is about 25 feet. It being understood that HIZ1 is adjacent to HIZ0 (slight overlap with HIZ0 can occur).
The EMFS system and its hydration plan establishes a third area (HIZ2) 1504. The distance 1514 for the permitter of HIZ2 1504 from the outer walls of the structure 1501 can be from about 10 to 200 feet, 150 feet or less, 70 feet or less, 60 feet or less, and preferably the distance 1514 is about 50 feet. It being understood that HIZ2 is adjacent to HIZ2 (slight overlap with HIZ2 can occur).
The system 1500, and area 1504 are configured in part based upon a natural fire break, as shown by river 1550.
Embodiments of the EFMS having hydration plans and hydration control commands, including any embodiments of the Examples having hydration plans, can have and can maintain predetermined condition based hydration levels as shown in Table 1.
Turning to
In this embodiment the zones around the structure exactly follow the shape of the structure, including having sharp corners. Thus, the shape, e.g., the foot print, of the zones follow and enlarge, and preferably exactly follow and enlarge, the foot print of the structure.
A system 1600 having a hydration plan and hydration control commands is associated with a structure 1601a, having an ancillary structure 1601b (e.g., patio, outdoor kitchen, garage) to be protected from wild fire. The structures 1601a, 1601b, have an EFMS. The EMFS system and its hydration plan establishes a first area (HIZ0) 1602. The distance 1612 for the permitter of HIZ0 1602 from the outer walls of the structures 1601a, 1601b, can be from about 1 to 20 feet, 10 feet or less, 5 feet or less, and preferably the distance 1612 is about 5 feet. It being understood that HIZ0 is adjacent to, and can include the outer surface of, the outer wall of the structures 1601, 1601b.
The EMFS system and its hydration plan establishes a second area (HIZ1) 1603. The distance 1613 for the permitter of HIZ1 1603 from the end of H1Z), can be from about 5 to 50 feet, 40 feet or less, 30 feet or less, and preferably the distance 1613 is about 25 feet. It being understood that HIZ1 is adjacent to HIZ0 (slight overlap with HIZ0 can occur). Thus, the distance for the permitter from HIZ1 from the structure outer walls is typically the sum of distances 1613+1612.
Embodiments of the EFMS having hydration plans and hydration control commands, including any embodiments of the Examples having hydration plans, can provide hydration amounts and rates based upon predetermined conditions, e.g., a wildfire event, as shown in Table 2.
Embodiments of the EFMS, including any of the Examples, have discrete “scenes” or “modes” hi the controller firmware of the EFMS controller, or in the control system in the cloud, or both, that act according to the exposure of the property, e.g., risk exposure, and then put the hydration plan into action, e.g., implement the hydration plan through the hydration control commands. For example, one mode may be a red flag warning mode, another a utility shutdown, another an evacuation mode, another an imminent fire mode, another a dry fuel moisture seasonal activation mode. There would be others that align with exposure (both real and perceived exposure, as well as, actual, predictive and derived exposure).
These modes could be triggered manually by selection of the user on their app or at their controller GUI located at the property; they can also be activated automatically by the integrated/network systems control system and software ingesting data (e.g., receiving data and information, whether from push, pull, or combinations of these and other ways of receiving data and information into the control systems) that is relevant to a certain property or properties, and then selecting the appropriate mode of protection; and combinations and variations of these manual and automatic modes. For example, an algorithm, e.g., logic on a controller, is configured such that if data is ingested indicating low fuel moistures for an area, then it can trigger activation of the EFMS in that area (such as at night when it will not interrupt the homeowner). The homeowner can opt into this feature on their app or an insurer or fire service can also opt in on behalf of their portfolio or their service area. The system may run all zones or select certain zones.
In this manner the use of hydration is coupled with exposure risks based upon actual, historic, predictive and derived data to protect and mitigate the risk to the structure from wildfire.
Additionally, the identification of the exposure (e.g., risk level, risk factors) and selection of data that is operable for the activation of systems is an embodiment of the present systems and methods. Selecting single or multiple data sources that determine fuel moisture, or fire exposure (ground based, satellite based, actual perimeters, spread modeling of where a fire can travel and expose, weather variables, etc.) are all integral in determining exposure in real time, actual, derived and predictive approaches.
Turning to
In embodiments, the larger sprinkler patterns cover at least 95%, at least 98%, at least 99% and 100% of the area of HIZ0. In embodiments, the smaller pattern covers at least 98% of the area of HIZ0, at least 99% of the area of HIZ0 and 100% of the area of HIZ0. In embodiments, the larger sprinkler patterns cover at least 95%, at least 98%, at least 99% and 100% of the area of HIZ1. Combinations and variations of these coverages can implement, and can be implemented based upon the exposure of the property, e.g., risk.
Embodiments of the EFMS having a hydration plan, and hydration control commands, including any of the embodiments of the Examples, can be configure for operation in a manner that makes, and maintains, the environment around the structure to be too wet to burn.
Thus, HIZ0 is five feet from the outer walls of the structure being protected, and has a footprint that follows the footprint of the structure. HIZ1 is adjacent to the outer edge of HIZ0 and extends outwardly therefrom to a distance that is 30 feet from the structure (e.g., HIZ1 starts at 5 feet away from the structure, i.e., adject to HIZ0, and extends 25 additional feet away from the structure). The system has two types of sprinkler heads that provide two patterns, small and large. The small patterns and the large patterns completely overlap over HIZ0, i.e., 100% overlap of HIZ0. The small patterns and the large patterns can also have a 60-70%, or greater, overlap for the entire protected area around the structure.
In exposures, e.g., risk factor, where ambers are present or likely to be present, a preferred wetting rate of about 1 inch of precipitation in 24 hours is provided to HIZ0I and HIZ1 receives about 0.25 inches of precipitation in 24 hours.
The system can also be configured to apply 0.75 inches, about 1.25 inches, about 1.5 inches, and about 2 inches, of precipitation per 24 hours to HIZ0. The system can also be configured to apply about 0.5 inches, about 0.75 inches, and about 1 inch of precipitation per 24 hours to HIZ1. Combinations and variations of these precipitation rates are contemplated. For example, depending on conditions and size of the zones, lower HIZ0 rates may be used in conjunction with higher HIZ1 rates. These rates, as well as, combinations and variations of them can also be used in a 3 zone system.
Hydration plan control commands can have one or more different hydration plans. These hydration plans can be implemented by the control system executing the hydration plan control commands, and operating the EMFS to hydrate the zones surrounding a structure.
The hydration plans can have a series of operation cycles, or cycles, when the EFMS is operating and delivering water to the zones.
The usage rate of water during operation of a hydration plan can be about 25 gpm during a wetting cycle.
During fire seasons, before an actual fire event, prewetting hydration plans can be implemented. In these prewetting hydration plans, for example, three to four hydration cycles, i.e., operation of the EMFS to wet the zones, occur 1 to 2 times a week, with each cycle providing about 0.25% the amount of full hydration, e.g., ¼ inch of precipitation in 24 hours, where full hydration is 1 inch in 24 hours.
Maintenance hydration plans can be used to address evaporation, and in particular during high levels of evaporation. In these maintenance hydration plans, for example, about 6 hydration cycles, i.e., operation of the EMFS to wet the zones, occur in a 24 hours period, with the total wetting of all 6 cycles being about 50% the amount of full hydration, e.g., ½ inch of precipitation in 24 hours, where full hydration is 1 inch in 24 hours.
During a fire event, e.g., ambers present, active fire within predetermined distance, evacuation order, etc., an in-event soak, or soak, hydration plan can be used. In these soak hydration plans, for example, about 12 hydration cycles, i.e., operation of the EMFS to wet the zones, occur in a 24 hours period, with the total wetting of all 12 cycles being about 100% the amount of full hydration, e.g., 1 inch of precipitation in 24 hours, where full hydration is 1 inch in 24 hours.
In a preferred embodiment the control system has all three types of hydration plans, and can automatically switch from the operation of one plan to the next based in part of information and data provided to the control systems over the network.
For the implementation of hydration plans, the fire suppression material, which as used in a hydration plan, would be considered the hydration material, can be water, a combination of water and foam, and foam. In a preferred embodiment, during an operating cycle, the hydration material is initially a water foam combination. For example, a 1:400 solution (foam:water by volume) of class A fire fighting foam approved by the USFS. This foam solution helps to break the surface tension of the water to accelerate absorption into vegetation and combustible fuels. The solution is preferably biodegradable, non-toxic, and requires no cleanup. The solution would be delivered preferably during the first ⅓ of the cycle, with the last ⅔ of the cycle being water.
Turning to
This EMFS has, is in control communication with a control system that has hydration plan control commands, which can be in the controller 1804, in a controller on the cloud, or combinations of these. The control system operates that hydration plan.
The hydration plan control commands, and thus the hydration plan which they provide, can be updated, for example, via the cloud, via the network, locally and combinations and variations of these.
Turning to
The manifolds are modular, so that a system can have one, two (as shown), three, four or more modules depending upon the number of sprinkler heads used in the system. This EMFS can perform all of the various functions of EMFS set forth in this Specification.
This EMFS has, is in control communication with a control system that has hydration plan control commands, which can be in the controller 1804, in a controller on the cloud, or combinations of these. The control system operates that hydration plan.
The hydration plan control commands, and thus the hydration plan which they provide, can be updated, for example, via the cloud, via the network, locally and combinations and variations of these.
It is noted that there is no requirement to provide or address the theory underlying the novel and groundbreaking performance or other beneficial features and properties that are the subject of, or associated with, embodiments of the present inventions. Nevertheless, various theories are provided in this specification to further advance the art in this important area, and in particular in the important area of lasers, laser processing and laser applications. These theories put forth in this specification, and unless expressly stated otherwise, in no way limit, restrict or narrow the scope of protection to be afforded the claimed inventions. These theories many not be required or practiced to utilize the present inventions. It is further understood that the present inventions may lead to new, and heretofore unknown theories to explain the operation, function and features of embodiments of the methods, articles, materials, devices and system of the present inventions; and such later developed theories shall not limit the scope of protection afforded the present inventions.
The various embodiments of networks, systems for providing and displaying data and information set forth in this specification may be used in the above identified fields and in various other fields. Additionally, these embodiments, for example, may be used with: existing networks, emergency systems, social media systems, alert systems, broadcast systems, as well as other existing equipment; future systems and activities; and such items that may be modified, in-part, based on the teachings of this specification. Further, the various embodiments set forth in this specification may be used with each other in different and various combinations. Thus, for example, the configurations provided in the various embodiments of this specification may be used with each other. For example, the components of an embodiment having A, A′ and B and the components of an embodiment having A″, C and D can be used with each other in various combinations, e.g., A, C, D, and A. A″ C and D, etc., in accordance with the teaching of this Specification. The scope of protection afforded the present inventions should not be limited to a particular embodiment, configuration or arrangement that is set forth in a particular embodiment, example, or in an embodiment in a particular Figure.
The invention may be embodied in other forms than those specifically disclosed herein without departing from its spirit or essential characteristics. The described embodiments are to be considered in all respects only as illustrative and not restrictive.
This application claims priority to and under 35 U.S.C. § 119(e)(1) the benefit of U.S. provisional application Ser. No. 63/274,900 filed Nov. 2, 2021, the entire disclosure of which is incorporated herein by reference.
Number | Date | Country | |
---|---|---|---|
63274900 | Nov 2021 | US |