This invention relates to novel pharmaceutically useful 3-oxoisoindoline-1-carboxamide compounds, in particular compounds that are useful in the treatment of cardiac arrhythmias.
Cardiac arrhythmias may be defined as abnormalities in the rate, regularity, or site of origin of the cardiac impulse or as disturbances in conduction which causes an abnormal sequence of activation. Arrhythmias may be classified clinically by means of the presumed site of origin (i.e. as supraventricular, including atrial and atrioventricular, arrhythmias and ventricular arrhythmias) and/or by means of rate (i.e. bradyarrhythmias (slow) and tachyarrhythmias (fast)).
In the treatment of cardiac arrhythmias, the negative outcome in clinical trials (see, for example, the outcome of the Cardiac Arrhythmia Suppression Trial (CAST) reported in New England Journal of Medicine, 321, 406 (1989)) with “traditional” antiarrhythmic drugs, which act primarily by slowing the conduction velocity (class I antiarrhythmic drugs), has prompted drug development towards compounds which selectively delay cardiac repolarization, thus prolonging the QT interval. Class III antiarrhythmic drugs may be defined as drugs which prolong the trans-membrane action potential duration (which can be caused by a block of outward K+ currents or from an increase of inward ion currents) and refractoriness, without affecting cardiac conduction. The rapidly and slow activating delayed rectifier potassium currents IKr and IKs, respectively, are the main currents involved in the overall repolarisation process during the action potential plateau and most class III agents predominantly block IKr One of the key disadvantages of hitherto known drugs which act by delaying repolarization by a block of IKr (class III or otherwise) is that almost all are known to exhibit a unique form of ventricular proarrhythmia known as torsades de pointes (turning of points), which may, on occasion be fatal. From the point of view of safety, the minimisation of this phenomenon (which has also been shown to be exhibited as a result of administration of non-cardiac drugs such as phenothiazines, tricyclic antidepressants, antihistamines and antibiotics) is a key problem to be solved in the provision of effective antiarrhythmic drugs.
In human atrial myocytes, an ultra-rapidly activating delayed rectifier potassium current, IKur also known as Iso or Isus, has been identified. The gene most likely coding the IKur channel protein has been identified, and is termed Kv1.5 (Wang et al (1993) Circ Res73:1061-0176, Feng et al (1997) Circ Res 80:572-579). Due to the slow inactivation of the current, IKur persists during the plateau phase and contributes significantly to action potential repolarisation in atrial myocytes. Most interestingly, voltage clamp studies investigating repolarising currents have failed to demonstrate the presence of IKur in human ventricular myocytes (Amos et al J Physiol (1996) 491(1):31-50). Thus, a selective blocker of IKur, that is a compound which block Kv1.5, is of great interest for the therapy of atrial arrhythmia, since such an agent should delay repolarisation in human atrial myocardium only, circumventing ventricular proarrhythmias (i.e. torsades de pointes,) associated with delayed ventricular repolarisation.
Kv1.5 blockers exhibiting these properties have been described (Peukert et al J Med Chem (2003) 46:486-498; Knobloch et al Naunyn-Schmiedeberg's Arch Pharmacol (2002) 366:482-487).
Some 3-oxoisoindoline-1-carboxamide derivatives are known. 3-oxoisoindoline-1-carboxamide derivatives are an ideal target for multicomponent reactions (MCRs). Tetrahedron Letters (1998), 39(18), 2725-2728 discloses some 3-oxoisoindoline-1-carboxamide derivatives prepared by so-called Ugi reactions (N-tert-butyl-3-oxo-2-propylisoindoline-1-carboxamide; N-tert-butyl-1-methyl-3-oxo-2-propylisoindoline-1-carboxamide; N,1-dimethyl-3-oxo-2-propylisoindoline-1-carboxamide; N-cyclohexyl-3-oxo-2-propylisoindoline-1-carboxamide; 2-benzyl-N-tert-butyl-3-oxoisoindoline-1-carboxamide; 2-benzyl-N,1-dimethyl-3-oxoisoindoline-1-carboxamide; 2-benzyl-N-tert-butyl-1-methyl-3-oxoisoindoline-1-carboxamide; 2-benzyl-N,1-dimethyl-3-oxoisoindoline-1-carboxamide.
Also Journal of Organic Chemistry (1999), 64(3), 1074-1076 discloses such compounds (tert-butyl {4-[1-(tert-butylcarbamoyl)-3-oxo-1,3-dihydro-2H-isoindol-2-yl]butyl}carbamate; 2-benzyl-3-oxo-N-(2-phenylethyl)isoindoline-1-carboxamide; 2-benzyl-N-butyl-3-oxoisoindoline-1-carboxamide; 2-benzyl-N-(2-methoxyethyl)-3-oxoisoindoline-1-carboxamide; 2-(2-hydroxyethyl)-3-oxo-N-(2-phenylethyl)isoindoline-1-carboxamide; N-butyl-2-(2-hydroxyethyl)-3-oxoisoindoline-1-carboxamide; 2-(2-hydroxyethyl)-N-(2-methoxyethyl)-3-oxoisoindoline-1-carboxamide; 2-[3-(1H-imidazol-1-yl)propyl]-3-oxo-N-(2-phenylethyl) isoindoline-1-carboxamide; N-butyl-2-[3-(1H-imidazol-1-yl)propyl]-3-oxoisoindoline-1-carboxamide; 2-[3-(1H-imidazol-1-yl)propyl]-N-(2-methoxyethyl)-3-oxoisoindoline-1-carboxamide; 2-cyclohexyl-3-oxo-N-(2-phenylethyl)isoindoline-1-carboxamide; N-butyl-2-cyclohexyl-3-oxoisoindoline-1-carboxamide; 2-cyclohexyl-N-(2-methoxyethyl)-3-oxoisoindoline-1-carboxamide) and in Bioorganic & Medicinal Chemistry Letters (2002), 12(14), 1813-1816 (2-cyclohexyl-N-hexyl-3-oxoisoindoline-1-carboxamide; N,2-dihexyl-3-oxoisoindoline-1-carboxamide; N-hexyl-2-(2-hydroxyethyl)-3-oxoisoindoline-1-carboxamide; N-hexyl-2-(4-hydroxybutyl)-3-oxoisoindoline-1-carboxamide; N,2-dicyclohexyl-3-oxoisoindoline-1-carboxamide; N-cyclohexyl-2-hexyl-3-oxoisoindoline-1-carboxamide; N-cyclohexyl-2-(2-hydroxyethyl)-3-oxoisoindoline-1-carboxamide; N-cyclohexyl-2-(4-hydroxybutyl)-3-oxoisoindoline-1-carboxamide; tert-butyl {4-[1-(cyclohexylcarbamoyl)-3-oxo-1,3-dihydro-2H-isoindol-2-yl]butyl}carbamate; N-adamantan-1-yl-2-cyclohexyl-3-oxoisoindoline-1-carboxamide; N-adamantan-1-yl-2-hexyl-3-oxoisoindoline-1-carboxamide; N-adamantan-1-yl-2-(2-hydroxyethyl)-3-oxoisoindoline-1-carboxamide; N-adamantan-1-yl-2-(2-morpholin-4-ylethyl)-3-oxoisoindoline-1-carboxamide; N-(2,6-dimethylphenyl)-2-hexyl-3-oxoisoindoline-1-carboxamide). Also Tetrahedron, vol. 53, No. 19, 6653-6679 discloses 3-oxoisoindoline-1-carboxamide derivatives prepared by so-called Ugi reactions (6-{[(2-allyl-1-methyl-3-oxo-2,3-dihydro-1H-isoindol-1-yl)carbonyl]amino}hexanoic acid). No pharmaceutical use of the prepared compounds is contemplated in those references. Tetrahedron Letters (2002), 43(6), 943-946 discloses some 3-oxoisoindoline-1-carboxamide derivatives prepared by intramolecular Diels-Alder type reactions (N,2-dibenzyl-5-hydroxy-4-methyl-3-oxoisoindoline-1-carboxamide; N-benzyl-2-tert-butyl-5-hydroxy-3-oxo-4-phenylisoindoline-1-carboxamide; N-benzyl-2-tert-butyl-5-hydroxy-4-methyl-3-oxoisoindoline-1-carboxamide; N,2-dibenzyl-5-hydroxy-3-oxo-4-phenylisoindoline-1-carboxamide; N-benzyl-2-tert-butyl-5-hydroxy-3-oxoisoindoline-1-carboxamide). Also Journal of Organic Chemistry (2004), 69(4), 1207-1214 discloses the compound (N,2-dibenzyl-5-{[(2-nitrophenyl)sulfonyl]amino}-3-oxoisoindoline-1-carboxamide). No pharmaceutical use of the prepared compounds is contemplated.
Journal of Heterocyclic Chemistry (1997), 34(4), 1371-1374 discloses some symmetrically substituted 3-oxoisoindoline-1-carboxamide derivatives prepared by carbonylative cyclization of 2-bromobenzaldehyde with primary amines (N,2-dibenzyl-3-oxoisoindoline-1-carboxamide; N,2-diethyl-3-oxoisoindoline-1-carboxamide; N,2-dibutyl-3-oxoisoindoline-1-carboxamide; N,2-didodecyl-3-oxoisoindoline-1-carboxamide; N,2-bis(4-methoxybenzyl)-3-oxoisoindoline-1-carboxamide; 3-oxo-N,2-dipropylisoindoline-1-carboxamide; N,2-diheptyl-3-oxoisoindoline-1-carboxamide; 3-oxo-N,2-diphenylisoindoline-1-carboxamide). No pharmaceutical use of the prepared compounds is contemplated. Some additional 3-oxoisoindoline-1-carboxamide derivatives are disclosed in Zhurnal Obshchei Khimii (1965), 1(7), 1292-7; Yakugaku Zasshi (1969), 89(3), 418-21; Journal of the Chemical Society, Perkin Transactions 1: Organic and Bio-Organic Chemistry (1972-1999) (1980), (4), 846-8 (2-(4-nitrophenyl)-3-(pyrrolidin-1-ylcarbonyl)isoindolin-1-one); EP1566378 A1 (2-(3-fluorophenyl)-5,6-dimethyl-3-[(4-methylpiperazin-1-yl)-carbonyl]isoindolin-1-one); EP 1661898; CHEMCATS (Chemical Catalogs Online provided by STN) (N-[2-(3,4-dimethoxyphenyl)ethyl]-3-oxo-2-(1-phenylethyl)isoindoline-1-carboxamide; N-cyclopentyl-2-(3-methoxybenzyl)-3-oxoisoindoline-1-carboxamide; 2-(1,3-benzodioxol-5-ylmethyl)-N-{[(4-methylphenyl)sulfonyl]methyl}-3-oxoisoindoline-1-carboxamide; N-cyclohexyl-3-oxo-2-(2-thienylmethyl)isoindoline-1-carboxamide; 2-benzyl-N-cyclohexyl-3-oxoisoindoline-1-carboxamide; N-{[(4-methylphenyl)sulfonyl]methyl}-3-oxo-2-(2-thienylmethyl)isoindoline-1-carboxamide; 2-(4-chlorobenzyl)-N-{[(4-methylphenyl)sulfonyl]methyl}-3-oxoisoindoline-1-carboxamide; N-cyclohexyl-2-(2-furylmethyl)-3-oxoisoindoline-1-carboxamide; 2-(4-chlorobenzyl)-N-cyclohexyl-3-oxoisoindoline-1-carboxamide; WO03/040096 (tert-butyl {1-benzyl-2-hydroxy-3-[(2-hydroxy-3-{[(3-oxo-2,3-dihydro-1H-isoindol-1-yl)carbonyl]amino}-4-phenylbutyl)amino]propyl}carbamate); U.S. Pat. No. 5,559,256; Chemical & Pharmaceutical Bulletin (1988), 36(1), 190-201; Journal of the Chemical Society (1972-1999), (1972), (6), 835-840; Justus Liebigs Annalen Der Chemie (1978), vol 2, 283-288 (1-hydroxy-2-methyl-3-oxo-N-(pyridin-2-ylmethyl)isoindoline-1-carboxamide; N-[3-(dimethylamino)propyl]-1-hydroxy-2-(2-hydroxyethyl)-3-oxoisoindoline-1-carboxamide; N-(3-azepan-1-ylpropyl)-1-hydroxy-3-oxo-2-phenylisoindoline-1-carboxamide, 1-hydroxy-2-methyl-3-oxoisoinoline-1-carbohydrazide; 1-hydroxy-3-oxo-phenylisoindoline-1-carbohydrazide); Zeitschrift for Naturforschung. B, 1993, vol 48:8, 1094-1104 (2-benzoyl-1-hydroxy-3-oxo-N-phenylisoindoline-1-carboxamide); J. Prakt. Chem. 2, 159, 1941, 241, 244, 254; Heterocycles Vol 38; No 8; 1994, 1828-1838; J. Org. Chem. 17, 1952, 4, 8, 1-13; Tetrahedron, EN, 53, 19, 1997, 6653-6680; Tetrahedron Letters, vol 38, No 3, 1997, 359-362 (6-{[(2-allyl-1-methyl-3-oxo-2,3-dihydro-1H-isoindol-1-yl)carbonyl]amino}hexanoic acid and 6-{[(1-methyl-2-octyl-3-oxo-2,3-dihydro-1H-isoindol-1-yl)carbonyl]amino}hexanoic acid). EP1566378 A1 discloses isoindoline derivatives having anestetic effect, EP 1661898 A1 isoindoline derivatives to be used in treatment of cancer, and EP 1749817 A1 isoindoline derivatives controlling neturophatic pain. US 2007/0099930 discloses substituted dihydroisoindolones having an effect as glucokinase modulators. Further isoindoline derivatives are described in SYNTHESIS 2006, No 23, pp 4046-4052 (methyl [1-(tert-butylcarbamoyl)-3-oxo-1,3-dihydro-2H-isoindol-2-yl]acetate); and in J. Org. Chem 2006, 71, 9544-9547 (N 1-cyclopentyl-N4-(2,6-difluorophenyl)-2-(2,4-dimethylphenyl)-5-methyl-3-oxoisoindoline-1,4-dicarboxamide).
The compounds disclosed in the documents listed above are disclaimed from the compound claims of the present application by proviso b). Compounds of proviso c) did not demonstrate activity at the concentrations at which they were tested.
Copending case no U.S. 60/830,186 describes proviso a).
Further, the following compound is known in Chemical Abstracts but no reference is given: 3-oxo-N,2-diphenylisoindoline-1-carboxamide.
We have surprisingly found that a novel group of 3-oxoisoindoline-1-carboxamide compounds exhibit electrophysiological activity, preferably Kv1.5 blocking activity, and are therefore expected to be useful in the treatment of cardiac arrhythmias.
According to the invention there is provided a compound of formula I,
or a pharmaceutically acceptable salt thereof
wherein
R1 represents C1-C12 alkyl (which alkyl group is optionally substituted by one or more groups selected from halogen, C2-C6 alkenyl, C3-C8 cycloalkyl, cyano, oxo, —OR8, —COR9, —SR10, —COXR11, —N(R12a)(R12b), —N(R13a)C(O)OR13b, —OC(O)N(R14a)(R14b), —SO2R15, aryl or Het1); further R1 represents aryl or Het2;
R8 to R11, R13a, R13b, R15 independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het9 (which C1-C6 alkyl, aryl and Het9 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het10);
R12a and R12b independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het11 (which C1-C6 alkyl, aryl and Het11 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het12), or together represent C3-C6 alkylene, optionally interrupted by an O atom;
R14a and R14b independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het13 (which C1-C6 alkyl, aryl and Het13 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het14), or together represent C3-C6 alkylene, optionally interrupted by an O atom;
R2 represents C1-C12 alkyl (which alkyl group is optionally substituted by one or more groups selected from halogen, —OR16, —COR17, C2-C6 alkenyl, C3-C8 cycloalkyl, cyano, trialkylsilyl, —COXR18, aryl or Het3);
further R2 represents —(CH2)kN(R19a)(R19b), —(CH2)kNR20aC(O)N(R20b)(R20c), —(CH2)nNR21aSO2R21b, —(CH2)nSO2R22, —(CH2)kN(R23a)C(O)OR23b, —OC(O)N(R24a)(R24b), C3-C8 cycloalkyl, aryl or Het4;
R16 to R18, R21, R22, R23a, R23b independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het15 (which C1-C6 alkyl, aryl and Het15 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het16);
R19a and R19b independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het19 (which C1-C6 alkyl, aryl and Het19 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het20) or together represent C3-C6 alkylene, optionally interrupted by an O atom;
R20a, R20b and R20c independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het21 (which C1-C6 alkyl, aryl and Het21 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het22);
R20b and R20c may together represent C3-C6 alkylene, optionally interrupted by an O atom;
R3 represents hydrogen, C1-C12 alkyl (which alkyl group is optionally substituted by one or more groups selected from halogen, —OR25, —COR26, C2-C6 alkenyl, C3-C8 cycloalkyl, trialkylsilyl, —COXR27, aryl or Het5);
further R3 represents —(CH2)kN(R28a)(R28b), —(CH2)kN(R29a)C(O)N(R29b)(R29c), —(CH2)nNR30aSO2R30b, —(CH2)nSO2R31, —(CH2)kN(R32a)C(O)OR32b, —OC(O)N(R33a)(R33b), C3-C8 cycloalkyl, aryl or Het6;
R25 to R27, R30, R31, R32a, R32b independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het23 (which C1-C6 alkyl, aryl and Het23 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het24);
R28a and R28b independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het25 (which C1-C6 alkyl, aryl and Het25 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het26), or together represent C3-C6 alkylene, optionally interrupted by an O atom;
R33a and R33b independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het27 (which C1-C6 alkyl, aryl and Het27 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het28) or together represent C3-C6 alkylene, optionally interrupted by an O atom;
R29a, R29b, and R29c independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het29 (which C1-C6 alkyl, aryl and Het29 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het30); R29b and R29c may together represent C3-C6 alkylene, optionally interrupted by an O atom;
R4 represents hydrogen, —OH, aryl, C1-C6 alkyl (which alkyl group is optionally substituted by one or more groups selected from halogen, hydroxy, C2-C4 alkenyl, trialkylsilyl), —OR34, —(CH2)mR35;
R34 independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het31 (which C1-C6 alkyl, aryl and Het31 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het32);
R35 independently represent aryl or Het33 (which aryl and Het33 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het34);
R5 to R7 independently represent, at each occurrence, hydrogen, —OH, halogen, cyano, nitro, C1-6 alkyl, —OR36, N(R37a)(R37b), —C(O)R38, —C(O)OR39, —C(O)N(R40a)(R40b), —NC(O)OR41, —OC(O)N(R42a)(R42), —N(R43a)C(O)R43b, —N(R44a)S(O)2R44b, —S(O)2R45, —OS(O)2R46, —(CH2)nN(R47a)(R47b), —(CH2)nNR48aC(O)N(R48b)(R48c), —(CH2)nNR49aSO2R49b, trialkylsilyl, aryl or Het7;
R36, R38, R39, R41, R43, R44a, R44b, R45, R46, R49a and R49b independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het35 (which C1-C6 alkyl, aryl and Het35 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het36);
R37a and R37b independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het37 (which C1-C6 alkyl, aryl and Het37 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het38), or together represent C3-C6 alkylene, optionally interrupted by an O atom;
R40a and R40b independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het39 (which C1-C6 alkyl, aryl and Het39 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het40), or together represent C3-C6 alkylene, optionally interrupted by an O atom;
R42a and R42b independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het41 (which C1-C6 alkyl, aryl and Het41 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het42), or together represent C3-C6 alkylene, optionally interrupted by an O atom;
R47a and R47b independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het43 (which C1-C6 alkyl, aryl and Het43 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het44), or together represent C3-C6 alkylene, optionally interrupted by an O atom;
R48a, R48b and R48c independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het45 (which C1-C6 alkyl, aryl and Het45 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het46); R48b and R48c may together represent C3-C6 alkylene, optionally interrupted by an O atom;
aryl is, at each occurrence, optionally substituted by —OH, halogen, cyano, nitro, C1-C6 alkyl, C3-C8 cycloalkyl, C2-C6 alkenyl, aryl, Het8, —OR50, —(CH2)mR51, —SR52, —C(O)R53, —COXR54, N(R55a)(R55b), —SO2R56, —OS(O)2R57, —(CH2)mN(R58a)(R58b), CH2)mNR59aC(O)N(R59b)(R59c), —C(O)OR60, —C(O)N(R61a)(R61b), —N(R62aC(O)R62b, N(R63a)C(O)OR3b, OC(O)N(R64a)(R64b), N(R65a)S(O)2R65b and OC(O)R66;
R50 to R54, R56, R57, R60, R62a, R62b, R63a, R63b, R65a, R65b and R66 independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het47 (which C1-C6 alkyl, aryl and Het47 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het48);
R51 independently represent aryl or Het49 (which aryl and Het49 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het50);
R55a and R55b independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het51 (which C1-C6 alkyl, aryl and Het51 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het52), or together represent C3-C6 alkylene, optionally interrupted by an O atom;
R58a and R58b independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het53 (which C1-C6 alkyl, aryl and Het53 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het54), or together represent C3-C6 alkylene, optionally interrupted by an O atom;
R59a, independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het55 (which C1-C6 alkyl, aryl and Het55 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het56); R59b and R59c may together represent C3-C6 alkylene, optionally interrupted by an O atom;
R61a and R61b independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het57 (which C1-C6 alkyl, aryl and Het57 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het58); or together represent C3-C6 alkylene, optionally interrupted by an O atom;
R64a and R64b independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het59 (which C1-C6 alkyl, aryl and Het59 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het60);
Het1 to Het60 independently represent, at each occurence, five- to twelve-membered heterocyclic groups containing one or more heteroatoms selected from oxygen, nitrogen and/or sulfur, which groups are optionally substituted by one or more substituents selected from —OH, oxo, halo, cyano, nitro, C1-6 alkyl, C2-6 alkenyl, aryl, a further Het, —OR67, —(CH2)mR68, —SR69, —COXR70, —N(R71a)(R71b), —SO2R72, —(CH2)mN(R73a)(R73b), —(CH2)mNR74aC(O)N(R74b)(R74c), —C(O)R75, —C(O)OR76, —C(O)N(R77a)(R77b), —N(R78a)C(O)R78b, —N(R79a)S(O)2R79b, OC(O)R80, —NC(O)OR81, —OC(O)N(R82a)(R82b);
R67, R69, R70, R72, R75, R76, R78a, R78b, R79a, R79b, R80 or R81 independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het61 (which C1-C6 alkyl, aryl and Het61 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het62);
R68 represents aryl or Het63 (which aryl and Het63 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het64);
R71a and R71b independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het65 (which C1-C6 alkyl, aryl and Het65 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het66), or together represent C3-C6 alkylene, optionally interrupted by an O atom;
R73a and R73b independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het67 (which C1-C6 alkyl, aryl and Het67 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het68); or together represent C3-C6 alkylene, optionally interrupted by an O atom;
R74a, R74b and R74c independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het69 (which C1-C6 alkyl, aryl and Het69 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het70); R74b and R74c may together represent C3-C6 alkylene, optionally interrupted by an O atom;
R77a, and R77b independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het71 (which C1-C6 alkyl, aryl and Het71 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het72); or together represent C3-C6 alkylene, optionally interrupted by an O atom;
R82a, and R82b independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het73 (which C1-C6 alkyl, aryl and Het73 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het74) or together represent C3-C6 alkylene, optionally interrupted by an O atom;
Het61 to Het74 independently represent, at each occurrence, five- to twelve-membered heterocyclic groups containing one or more heteroatoms selected from oxygen, nitrogen and/or sulfur, which groups are optionally substituted by one or more substituents selected from —OH, oxo, halo, cyano, nitro, C1-6 alkyl;
X represents a nitrogen or oxygen atom;
m is an integer of 0 to 10;
n is an integer of 0 to 4;
k is an integer of 1 to 5;
provided that
a) R2 or R3 does not represent a fragment of formula
wherein
R83 and R84 represent independently, at each occurrence, halogen, C1-C12 alkyl, C1-C12 alkoxy, C1-C12 haloalkyl, C1-C12 haloalkoxy, cyano, —SR86, —N(R87a)R87b, C2-C6 alkynyl, aryl or Het75;
R85 represents hydrogen, C1-C12 alkyl group or C1-C12 alkoxy group (which C1-C12 alkyl and C1-C12 alkoxy groups are optionally substituted by one or more groups selected from halogen, C2-C6 alkenyl, C2-C6 alkynyl, cyano, oxo, aryl, Het76, —OR88, —SR89, —COXR90, —N(R91a)R91b, —SO2R92);
Het75 to Het76 independently represent, at each occurrence, five- to twelve-membered heterocyclic groups containing one or more heteroatoms selected from oxygen, nitrogen and/or sulfur, which groups are optionally substituted by one or more substituents selected from —OH, oxo, halo, cyano, nitro, C1-6 alkyl, C1-6 alkoxy, aryl, aryloxy, —N(R93a)R93b, —C(O)R93c, —C(O)OR93d, —C(O)N(R93e)R93f, —N(R93g)C(O)R93h and —N(R93i)S(O)2R93j, OC(O)R93k and a further Het;
R86 to R93 represent independently, at each occurrence, hydrogen or C1-6 alkyl;
X represent O or N;
b) the compound is not:
The compounds of formula I as defined above are referred to hereinafter as “the compounds of the invention”.
In one embodiment R1 represents C1-C7 alkyl (which alkyl group is optionally substituted by one or more groups selected from halogen, C2-C6 alkenyl, C3-C8 cycloalkyl, cyano, oxo, —OR8, —COXR11, aryl or Het1); further R1 represents Het2.
In one embodiment R1 represents C1-C7 alkyl (which alkyl group is optionally substituted by one or more groups selected from halogen, C2-C6 alkenyl, C3-C8 cycloalkyl, cyano, oxo, —OR8, —COXR11, phenyl, naphthalenyl or Het1).
In one embodiment R1 represents (1-benzylpyrrolidin-3-yl); (1-fluoro-3-phenyl-propan-2-yl); (1-methyl-5-phenyl-pyrazol-3-yl)methyl; (1-methylpyrrol-2-yl)methyl; (2,3-difluorophenyl)methyl; (2,4-difluorophenyl)methyl; (2,5-dimethoxyphenyl)methyl; (2,5-dimethylphenyl)methyl; (2-bromophenyl)methyl; (2-chloro-4-fluoro-phenyl)methyl; (2-chloro-6-phenoxy-phenyl)methyl; (2-chlorophenyl)methyl; (2-dimethylamino-2-phenyl-ethyl); (2-ethoxyphenyl)methyl; (2-fluorophenyl)methyl; (2-methoxyphenyl)methyl; (2-methyl-2-phenyl-propyl); (2-methylphenyl)methyl; (2-phenoxyphenyl)methyl; (2-phenylphenyl)methyl; (2-pyridin-3-ylphenyl)methyl; (3,4-dichlorophenyl)methyl; (3,4-difluorophenyl)methyl; (3,5-dimethoxyphenyl)methyl; (3-chlorophenyl)methyl; (3-cyano-4-fluoro-phenyl)methyl; (3-cyanophenyl)methyl; (3-fluorophenyl)methyl; (3-hydroxy-2,2-dimethyl-propyl); (3-methoxyphenyl)methyl; (3-phenyl1,2-oxazol-5-yl)methyl; (3-phenylphenyl)methyl; (3-pyrrol-1-ylphenyl)methyl; (4-chlorophenyl)methyl; (4-dimethylaminophenyl)methyl; (4-fluorophenyl)methyl; (4-hydroxyphenyl)methyl; (4-methoxycarbonylphenyl)methyl; (4-phenoxyphenyl)methyl; (4-phenylphenyl)methyl; (5-methyl-2-phenyl-1,3-oxazol-4-yl)methyl; (5-methyl-3-phenyl-1,2-oxazol-4-yl)methyl; (phenyl-pyridin-2-yl-methyl); [(1R)-1-(4-methoxyphenyl)ethyl]; [(1S)-1-phenylethyl]; [(1R)-1-phenylethyl]; [(1R)-2-(4-chlorophenyl)-1-(4,4,4-trifluorobutylcarbamoyl)ethyl]; [(1R)-2-(4-chlorophenyl)-1-methoxycarbonyl-ethyl]; [(1S)-1-naphthalen-1-ylethyl]; [(2R)-2-(4-chlorophenyl)propyl]; [(2S)-2-(4-chlorophenyl)propyl]; [(4-chlorophenyl)-pyridin-4-yl-methyl]; [(4-fluorophenyl)-pyridin-3-yl-methyl]; [(4-fluorophenyl)-pyridin-3-yl-methyl]; [(4-fluorophenyl)-pyridin-3-yl-methyl]; [2-(2,4-dichlorophenyl)phenyl]methyl; [2-(2,4-difluorophenyl)phenyl]methyl; [2-(2,5-difluorophenyl)phenyl]methyl; [2-(2-chlorophenyl)phenyl]methyl; [2-(3,4-dichlorophenyl)phenyl]methyl; [2-(3,4-difluorophenyl)phenyl]methyl; [2-(3-chloro-4-fluoro-phenyl)phenyl]methyl; [2-(3-fluorophenyl)phenyl]methyl; [2-(4-chloro-2-methyl-phenyl)-2,2-difluoro-ethyl]; [2-(4-chlorophenyl)phenyl]methyl; [2-(4-fluoro-2-methyl-phenyl)phenyl]methyl; [2-(4-fluorophenoxy)phenyl]methyl; [2-(4-fluorophenyl)phenyl]methyl; [2-(4-methoxyphenyl)-2-oxo-ethyl]; [2-(4-methoxyphenyl)phenyl]methyl; [2-(4-methylphenyl)phenyl]methyl; [2-(trifluoromethyl)phenyl]methyl; [2-[4-(trifluoromethyl)phenoxy]phenyl]methyl; [3-(difluoromethoxy)phenyl]methyl; [3,5-bis(trifluoromethyl)phenyl]methyl; [4-(difluoromethoxy)phenyl]methyl; [4-(trifluoromethyl)phenyl]methyl; 1-(1H-indol-3-yl)propan-2-yl; 1-(4-fluorophenyl)ethyl; 1-naphthalen-1-ylethyl; 1-naphthalen-2-ylethyl; 1-phenylethyl; 1-phenylpropyl; 2-(1-cyclohexenyl)ethyl; 2-(2-ethoxyphenyl)ethyl; 2-(2-methoxyphenyl)ethyl; 2-(2-phenoxyphenyl)ethyl; 2-(3,4-dichlorophenyl)ethyl; 2-(3,5-dimethoxyphenyl)ethyl; 2-(3-bromo-4-methoxy-phenyl)ethyl; 2-(3-fluorophenyl)ethyl; 2-(4-bromophenyl)ethyl; 2-(4-chlorophenyl)ethyl; 2-(4-chlorophenyl)propyl; 2-(4-fluorophenoxy)propyl; 2-(4-fluorophenyl)ethyl; 2-(4-fluorophenyl)propyl; 2-(4-phenoxyphenyl)ethyl; 2-(4-methoxyphenyl)ethyl; 2-(4-methoxyphenyl)ethyl; 2-(4-phenylphenyl)ethyl; 2-(5-bromo-2-methoxy-phenyl)ethyl; 2-(6-chloro-1H-indol-3-yl)ethyl; 2,2-dimethylpropyl; 2,2-diphenylethyl; 2-[2-(trifluoromethoxy)phenyl]ethyl; 2-[3-(trifluoromethyl)phenyl]ethyl; 2-[4-(diethylcarbamoyl)phenyl]ethyl; 2-[4-(trifluoromethyl)phenyl]ethyl; 2-benzo[1,3]dioxol-5-ylethyl; 2-methylbutyl; 2-methylpropyl; 2-naphthalen-1-ylpropyl; 2-phenoxypropyl; 2-phenylpropyl; 2-thiophen-2-ylethyl; 3,3-dimethylbutyl; 3-phenylpropyl; 3-pyrrolidin-1-ylpropyl; 4-phenylbutan-2-yl; 4-phenylbutyl; 9H-fluoren-9-yl; benzhydryl; benzyl; cycloheptyl; cyclohexyl; cyclohexylmethyl; naphthalen-1-ylmethyl; pentan-3-yl; phenethyl; thiophen-2-ylmethyl; 2-phenylpropan-2-yl; 1-phenylpropyl; [2-(4-chlorophenyl)-2-methyl-propyl]; [4-fluoro-2-(4-fluorophenyl)phenyl]methyl; (4-fluoro-2-phenyl-phenyl)methyl; [5-fluoro-2-(4-fluorophenyl)phenyl]methyl; (5-fluoro-2-phenyl-phenyl)methyl; 1-(4-fluorophenyl)ethyl; 2-(4-chlorophenyl)propan-2-yl; 2-(4-fluorophenyl)propan-2-yl or 1-(4-chlorophenyl)ethyl.
(The naming of the radicals was made using a program from Lexichem package from Openeye, version 4.)
In one embodiment R2 represents C1-C6 alkyl (which alkyl group is optionally substituted by one or more groups selected from halogen, C2-C6 alkenyl, C3-C8 cycloalkyl, —COR17, trimethylsilyl, —COXR18, aryl or Het3);
further R2 represent aryl or Het4.
In one embodiment R2 represents (1-benzylpyrrolidin-3-yl); (1-methylpyrrol-2-yl)methyl; (2,2-difluorobenzo[1,3]dioxol-5-yl)methyl; (2,3-dimethylcyclohexyl); (2,4-difluorophenyl)methyl; (2-chloro-4-methylsulfonyl-phenyl)methyl; (2-chlorophenyl)methyl; (2-fluoro-4-methylsulfonyl-phenyl)methyl; (2-hydroxyphenyl)methyl; (2-methylpropan-2-yl)oxycarbonylmethyl; (3,4-dichlorophenyl)methyl; (3,4-difluorophenyl)methyl; (3,4-dimethoxyphenyl)methyl; (3-carbamoyl-4-fluoro-phenyl)methyl; (3-chlorophenyl)methyl; (3-cyano-4-fluoro-phenyl)methyl; (3-cyanophenyl)methyl; (3-methoxyphenyl); (3-methyl-5-phenyl-1,2-oxazol-4-yl)methyl; (4-amino-2-methyl-pyrimidin-5-yl)methyl; (4-carbamoylphenyl); (4-carbamoylphenyl)methyl; (4-cyano-2,6-difluoro-phenyl)methyl; (4-cyanophenyl); (4-cyanophenyl)methyl; (4-dimethylaminophenyl)methyl; (4-fluorophenyl)methyl; (4-hydroxyphenyl)methyl; (4-methylcyclohexyl); (4-methylsulfonylphenyl)methyl; (5-methyl-1,2-oxazol-3-yl)methyl; (5-methyl-2-furyl)methyl; (5-methyl-2-phenyl-1,3-oxazol-4-yl)methyl; (5-methylpyrazin-2-yl)methyl; [2-(trifluoromethyl)phenyl]methyl; [3-(aminomethyl)-4-fluoro-phenyl]methyl; [3-(difluoromethoxy)phenyl]methyl; [3-(dimethylcarbamoyl)-4-fluoro-phenyl]methyl; [3-(trifluoromethyl)phenyl]methyl; [3,5-bis(trifluoromethyl)phenyl]methyl; [3-[[(2,2-difluoroacetyl)amino]methyl]-4-fluoro-phenyl]methyl; [4-(acetamidomethyl)phenyl]methyl; [4-(aminomethyl)phenyl]; [4-(difluoromethoxy)phenyl]methyl; [4-(trifluoromethyl)phenyl]methyl; [4-[[(2,2-difluoroacetyl)amino]methyl]phenyl]; [4-[[(2-fluoroacetyl)amino]methyl]phenyl]methyl; [5-(2-furyl) 1,2-oxazol-3-yl]methyl; [6-(trifluoromethyl)pyridin-3-yl]methyl; 1H-indol-3-ylmethyl; 1-pyridin-4-ylethyl; 2-(1H-indol-3-yl)ethyl; 2-(2,4-dichlorophenyl)ethyl; 2-(2,6-dichlorophenyl)ethyl; 2-(2-chlorophenyl)ethyl; 2-(3,4-dichlorophenyl)ethyl; 2-(3,4-dimethoxyphenyl)ethyl; 2-(3-chlorophenyl)ethyl; 2-(3-fluorophenyl)ethyl; 2-(4-benzoylpiperazin-1-yl)ethyl; 2-(4-chlorophenyl)ethyl; 2-(4-fluorophenyl)ethyl; 2-(4-methoxyphenyl)ethyl; 2-[3-(trifluoromethyl)phenyl]ethyl; 2-benzo[1,3]dioxol-5-ylethyl; 2-ethoxycarbonylethyl; 2-furylmethyl; 2-methoxyethyl; 2-pyridin-2-ylethyl; 2-pyridin-4-ylethyl; 2-thiophen-2-ylethyl; 3-imidazol-1-ylpropyl; 3-methoxypropyl; 4,4,4-trifluorobutyl; 4,4-difluorobutyl; benzo[1,3]dioxol-5-ylmethyl; benzotriazol-1-ylmethyl; benzyl; butyl; cyclohexyl; ethyl; methoxycarbonylmethyl; phenethyl; propan-2-yl; propyl; pyridin-3-ylmethyl; pyridin-4-ylmethyl; tert-butyl; trimethylsilylmethyl; (5-oxo-1-propan-2-yl-pyrrolidin-3-yl)methyl; propan-2-ylcarbamoylmethyl, (2-fluorophenyl)methyl; (3-fluorophenyl)methyl; 1-phenylethyl; 2-phenylpropan-2-yl; or 5-cyanopentyl.
(The naming of the radicals was made using a program from Lexichem package from Openeye, version 4.)
In one embodiment R1 represents C1-C7 alkyl (which alkyl group is optionally substituted by one or more groups selected from halogen, C2-C6 alkenyl, C3-C8 cycloalkyl, cyano, oxo, —OR8, —COXR11, aryl or Het1); further R1 represents Het2; and
R2 represents C1-C6 alkyl (which alkyl group is optionally substituted by one or more groups selected from halogen, C2-C6 alkenyl, C3-C7 cycloalkyl, —COR17, trimethylsilyl, —COXR18, aryl or Het3); further R2 represents aryl or Het4.
In one embodiment R1 represents C3-C8 cycloalkyl (which cycloalkyl group is optionally substituted by one or more groups selected from halogen, C2-C6 alkenyl, C3-C8 cycloalkyl, cyano, oxo, —OR8, —COXR11, aryl or Het1); and
R2 represents C1-C6 alkyl (which alkyl group is optionally substituted by one or more groups selected from halogen, C2-C6 alkenyl, C3-C7 cycloalkyl, —COR17, trimethylsilyl, —COXR18, aryl or Het3); further R2 represents aryl or Het4.
In one embodiment R3 represents hydrogen, C1-C4 alkyl (which alkyl group is optionally substituted by one or more groups selected from fluoro, C2-C6 alkenyl, trialkylsilyl, —COXR27, aryl or Het5).
In one embodiment R3 represents hydrogen.
In one embodiment R4 represents hydrogen.
In one embodiment R5 to R7 independently represent, at each occurrence, hydrogen, —OH, halogen, cyano, C1-6 alkyl, —OR36, —C(O)N(R40a)(R40b), —N(R44a)S(O)2R44b.
In one embodiment aryl is, independently, at each occurrence, optionally substituted by —OH, halogen, cyano, nitro, C1-C6 alkyl, —OR50, C2-C6 alkenyl, phenyl, Het8; wherein R50 represents C1-C6 alkyl or aryl.
In one embodiment aryl is, at each occurrence, phenyl.
In an embodiment of this invention the compound of formula I is
in which Ra is hydrogen or fluoro;
Rb is hydrogen or fluoro;
Rc is hydrogen or fluoro;
R3 is C1-4 alkyl optionally terminally substituted by 1, 2 or 3 fluoro;
R5 is hydrogen or C1-4 alkyl,
R6 is hydrogen, OH, halo or C1-4alkoxy;
R7 is hydrogen or halo.
In an embodiment of this invention the compound of formula I is
in which
Rd is hydrogen or C1-4 alkyl;
Re is hydrogen or C1-4 alkyl;
Rf is hydrogen or C1-4 alkyl;
Rg is hydrogen or halo;
Rh is hydrogen or halo;
Rj is hydrogen or halo;
R5 is hydrogen or halo.
In an embodiment of this invention the compound of formula I is
in which
Rk is hydrogen or C1-4 alkyl;
Rl is hydrogen or C1-4 alkyl;
Rm is hydrogen or halo;
R2 is C3-6 alkyl;
R5 is hydrogen or halo;
R6 is hydrogen or halo.
In an embodiment of this invention the compound of formula I is
in which
Rn is hydrogen or halo;
Rp is hydrogen or halo;
R2 is C3-6 alkyl or benzyl, optionally substituted by halo in the phenyl ring;
R5 is hydrogen or halo.
In an embodiment of this invention R1 is (2-phenylphenyl)methyl (biphenylmethyl), optionally substituted by one to three fluoro;
R2 is selected from ethyl, propyl, n-butyl, tert-butyl, 4,4,4-trifluorobutyl, 4,4-difluorobutyl, 4-fluorobutyl, benzo[1,3]dioxol-5-yl-methyl, (2,2-difluorobenzo[1,3]dioxol-5-yl)methyl, benzyl, (2-chlorophenyl)methyl, (4-fluorophenyl)methyl, (2-trifluoromethylphenyl)methyl, (3-cyanophenyl)methyl, (4-cyanophenyl)methyl, (3-cyano-4-fluorophenyl)methyl, (4-carbamoylphenyl)methyl, (5-methylpyrazin-2-yl)methyl, pyridin-3-ylmethyl, (4-amino-2-methyl-pyrimidin-5-yl)methyl, [6-(trifluoromethyl)pyridin-3-yl]methyl, pyridin-3-ylmethyl, [6-(trifluoromethyl)pyridin-3-yl]methyl, pyridin-4-ylmethyl, [4-[[(2,2-difluoroacetyl)amino]methyl]phenyl]methyl, [4-(acetamidomethyl)phenyl]methyl, [4-[[(2-fluoroacetyl)amino]methyl]phenyl]methyl, 2-phenylethyl or 2-(4-fluorophenyl)ethyl;
R5 to R7 are independently selected from —OH, methyl, methoxy, chloro, fluoro, cyano, methylsulfonylamino, fluoromethoxy, difluoromethoxy, trifluoromethanesulfonate;
R3 is hydrogen;
R4 is hydrogen;
R5 to R7 are independently selected from hydrogen, —OH, methyl, methoxy, fluoro or chloro;
or an enantiomer thereof.
In an embodiment of this invention R1 is benzhydryl (diphenylmethyl), optionally substituted by one or more substitutents selected from fluoro or chloro;
R2 is selected from ethyl, propyl, butyl, tert-butyl, 4,4-difluorobutyl, 4,4,4-trifluorobutyl, benzyl, (2-chloro-4-methylsulfonyl-phenyl)methyl, (4-methylsulfonylphenyl)methyl, (2-fluoro-4-methylsulfonyl-phenyl)methyl, (4-methylsulfonylphenyl)methyl, (2-hydroxyphenyl)methyl, [2-(trifluoromethyl)phenyl]methyl, (2,4-difluorophenyl)methyl, (2-chlorophenyl)methyl, 2-(4-fluorophenyl)ethyl
R3 is hydrogen;
R4 is hydrogen;
R5 to R7 are independently selected from hydrogen, —OH, methyl, methoxy, fluoro or chloro;
or an enantiomer thereof.
In an embodiment of this invention R1 is 4-phenylbutan-2-yl, optionally substituted by one or more substitutents selected from fluoro or chloro;
R2 is selected from (2-chlorophenyl)methyl, [2-(trifluoromethyl)phenyl]methyl, benzyl, 2-phenylethyl;
R3 is hydrogen;
R4 is hydrogen;
R5 to R7 are independently selected from hydrogen, —OH, methyl, methoxy, fluoro or chloro;
or an enantiomer thereof.
In an embodiment of this invention R1 is 3,3-dimethylbutyl;
R2 is selected from [3-(difluoromethoxy)phenyl]methyl, [3-(trifluoromethoxy)phenyl]methyl, 2-(1H-indol-3-yl)ethyl, 1H-indol-3-ylmethyl, (3-chlorophenyl)methyl, (3,4-dichlorophenyl)methyl, [4-(difluoromethoxy)phenyl]methyl, 2-(3-fluorophenyl)ethyl, 2-benzo[1,3]dioxol-5-ylethyl, 2-[3-(trifluoromethyl)phenyl]ethyl, 2-(3,4-dichlorophenyl)ethyl, 2-(2,4-dichlorophenyl)ethyl, 2-(2,6-dichlorophenyl)ethyl, 2-(4-chlorophenyl)ethyl, 2-(3-chlorophenyl)ethyl or 2-(2-chlorophenyl)ethyl;
R3 is hydrogen;
R4 is hydrogen;
R5 to R7 are independently selected from hydrogen, —OH, methyl, methoxy, fluoro or chloro;
or an enantiomer thereof.
In an embodiment of this invention R1 is benzyl (phenylmethyl), optionally substituted by one or more substitutents selected from fluoro, chloro, cyano;
R2 is selected from ethyl, n-propyl, isopropyl, n-butyl, sec-butyl, tert-butyl, benzo[1,3]dioxol-5-yl-methyl, benzyl, 1-phenylethyl, 2-phenylethyl, cyclopentyl, which groups are optionally substituted by one or more substitutents selected from fluoro, chloro, cyano, trifluoromethyl;
further R2 represents pyridin-3-ylmethyl, pyridin-4-ylmethyl, [3-[[(2,2-difluoroacetyl)amino]methyl]-4-fluoro-phenyl]methyl, [4-(difluoromethoxy)phenyl]methyl, (4-dimethylaminophenyl)methyl, [5-(2-furyl)1,2-oxazol-3-yl]methyl, [5-(2-furyl)1,2-oxazol-3-yl]methyl, 2-(3,4-dimethoxyphenyl)ethyl, butan-2-yl, cyclopentyl, (2,3-dimethylcyclohexyl), (4-hydroxyphenyl)methyl, [2-(trifluoromethyl)phenyl]methyl;
R3 is hydrogen;
R4 is hydrogen;
R5 to R7 are independently selected from hydrogen, —OH, methyl, methoxy, bromo, chloro, fluoro, trimethylsilyl;
or an enantiomer thereof.
In an embodiment of this invention R1 is (2-cyclopentylphenyl)methyl;
R2 is selected from 4,4-difluorobutyl, methyl;
R3 is hydrogen;
R4 is hydrogen;
R5 to R7 are independently selected from bromo, fluoro, chloro or cyano;
or an enantiomer thereof.
In an embodiment of this invention R1 is 1-phenylethyl, optionally substituted by one or more substitutents selected from fluoro, chloro, cyano, methoxy;
R2 is selected from ethyl, propyl, tert-butyl, 4,4-difluorobutyl, 4,4,4-trifluorobutyl, 4-methylsulfonyl, benzyl, which benzyl group is optionally substituted by one or more substituents selected from fluoro, chloro, cyano;
further R2 represents pyridinmethyl, ((2,2-difluoroacetyl)amino)methyl, difluoromethoxy, dimethylamino, 5-(2-furyl)1,2-oxazol-3-yl-methyl, cyclopentyl
R3 is hydrogen;
R4 is hydrogen;
R5 to R7 are independently selected from bromo, fluoro, chloro or cyano;
or an enantiomer thereof.
In an embodiment of this invention R1 is 3-hydroxy-2,2-dimethylpropyl;
R2 is selected from [3-(difluoromethoxy)phenyl]methyl, (3,4-dichlorophenyl)methyl, (3-chlorophenyl)methyl, [3-(trifluoromethyl)phenyl]methyl;
R3 is hydrogen;
R4 is hydrogen;
R5 to R7 are independently selected from hydrogen, fluoro, chloro;
or an enantiomer thereof.
In an embodiment of this invention R1 is 2-(4-chlorophenyl)propyl;
R2 is selected from methyl, ethyl, n-propyl, propan-2-yl, butyl, (4-amino-2-methyl-pyrimidin-5-yl)methyl, (5-methylpyrazin-2-yl)methyl, pyridin-3-ylmethyl, [6-(trifluoromethyl)pyridin-3-yl]methyl, (4-amino-2-methyl-pyrimidin-5-yl)methyl, [6-(trifluoromethyl)pyridin-3-yl]methyl, (5-methyl-2-phenyl-1,3-oxazol-4-yl)methyl, 4,4,4-trifluorobutyl, (4-methylsulfonylphenyl)methyl, benzyl (2,2-difluorobenzo[1,3]dioxol-5-yl)methyl, (4-methylsulfonylphenyl)methyl, butyl, 2-(1H-indol-3-yl)ethyl; (4-carbamoylphenyl)methyl, (4-cyanophenyl)methyl, [3-(dimethylcarbamoyl)-4-fluoro-phenyl]methyl, [3-(dimethylcarbamoyl)-4-fluoro-phenyl]methyl, [4-(aminomethyl)phenyl], [4-[[(2,2-difluoroacetyl)amino]methyl]phenyl], (4-carbamoylphenyl), pyridin-4-ylmethyl, 3-methoxypropyl, (3-cyano-4-fluoro-phenyl)methyl, [3-[[(2,2-difluoroacetyl)amino]methyl]-4-fluoro-phenyl]methyl, [3-(aminomethyl)-4-fluoro-phenyl]methyl, (3-carbamoyl-4-fluoro-phenyl)methyl, 2-pyridin-4-ylethyl, (1-methylpyrrol-2-yl)methyl, [4-(difluoromethoxy)phenyl]methyl, (1-benzylpyrrolidin-3-yl), 3-imidazol-1-ylpropyl, (4-dimethylaminophenyl)methyl, (4-methylsulfonylphenyl)methyl, 3-dimethylaminopropyl, 1-pyridin-3-ylethyl, (3-methoxyphenyl), 1-pyridin-4-ylethyl, (4-cyanophenyl), 3-methoxypropyl, benzo[1,3]dioxol-5-ylmethyl, (3,4-dimethoxyphenyl)methyl, (3-methyl-5-phenyl-1,2-oxazol-4-yl)methyl, (5-methyl 1,2-oxazol-3-yl)methyl, [2-(trifluoromethyl)phenyl]methyl, (2-chlorophenyl)methyl, 2-(3,4-dimethoxyphenyl)ethyl, 2-thiophen-2-ylethyl, 2-(4-methoxyphenyl)ethyl, 2-phenylethyl, 2-methoxyethyl, (4-fluorophenyl)methyl, methoxycarbonylmethyl or benzotriazol-1-ylmethyl;
R3 is hydrogen;
R4 is hydrogen;
R5 to R7 are independently selected from hydrogen, bromo, fluoro, chloro;
or an enantiomer thereof.
In an embodiment of this invention R1 is 2-(4-chlorophenyl)propyl;
R2 represents tert-butyl;
R3 is hydrogen;
R4 is hydrogen;
R5 to R7 are independently selected from hydrogen, —OH, bromo, fluoro, chloro, methyl, —OCH3, —OCH2F, trimethylsilyl;
or an enantiomer thereof.
In an embodiment of this invention R1 is 2-(4-fluorophenyl)propyl;
R2 represents 4,4,4-trifluorobutyl, benzyl, tert-butyl, butyl,
R3 is hydrogen;
R4 is hydrogen;
R5 to R7 are independently selected from hydrogen, —OH, bromo, fluoro, chloro, methoxy;
or an enantiomer thereof.
In an embodiment of this invention R1 is 2,2-dimethylpropyl;
R2 represents [3-(trifluoromethoxy)phenyl]methyl [3-(difluoromethoxy)phenyl]methyl, (3,4-dichlorophenyl)methyl, 2-[3-(trifluoromethyl)phenyl]ethyl, 2-(1H-indol-3-yl)ethyl, (3-chlorophenyl)methyl, [4-(difluoromethoxy)phenyl]methyl, [3-(trifluoromethyl)phenyl]methyl, 2-(3-fluorophenyl)ethyl,
2-(2-chlorophenyl)ethyl, 2-(3-chlorophenyl)ethyl, 2-(2,4-dichlorophenyl)ethyl, 2-(4-chlorophenyl)ethyl, 2-(2,6-dichlorophenyl)ethyl, benzo[1,3]dioxol-5-ylmethyl, or benzyl;
R3 is hydrogen;
R4 is hydrogen;
R5 to R7 are independently selected from hydrogen, bromo, fluoro, chloro,
or an enantiomer thereof.
In an embodiment of this invention R1 is 2-phenylpropan-2-yl;
R2 represents benzyl, 1-phenylethyl, (4-fluorophenyl)methyl,4,4,4-trifluorobutyl;
R3 is hydrogen;
R4 is hydrogen;
R5 to R7 are independently selected from hydrogen, bromo, fluoro, chloro,
or an enantiomer thereof.
In an embodiment of this invention R1 is 1-phenylpropyl;
R2 is benzyl, (2-chlorophenyl)methyl, [2-(trifluoromethyl)phenyl]methyl or (4-dimethylaminophenyl)methyl;
R3 is hydrogen;
R4 is hydrogen;
R5 to R7 are independently selected from hydrogen, bromo, fluoro, chloro;
or an enantiomer thereof.
In an embodiment of this invention R1 is [2-(4-chlorophenyl)-2-methyl-propyl];
R2 represents n-butyl;
R3 is hydrogen;
R4 is hydrogen;
R5 to R7 are independently selected from hydrogen, bromo, fluoro or chloro;
or an enantiomer thereof.
In an embodiment of this invention R2 is (2-chlorophenyl)methyl;
R1 represents benzhydryl, (2-pyridin-3-ylphenyl)methyl, (3,4-difluorophenyl)methyl 1-(1H-indol-3-yl)propan-2-yl, 2-(4-chlorophenyl)propyl, (2,5-dimethylphenyl)methyl,
[(1R)-1-(4-methoxyphenyl)ethyl], 2-(1H-indol-3-yl)propyl, [(1R)-1-(3-methoxyphenyl)ethyl],
[(1S)-1-naphthalen-1-ylethyl], 1-phenylpropyl, 2-phenylpropyl, 3-phenylpropyl, 2-phenethyl,
4-phenylbutan-2-yl, (2-phenylphenyl)methyl;
R3 is hydrogen;
R4 is hydrogen;
R5 to R7 are independently selected from hydrogen, bromo, fluoro and chloro;
or an enantiomer thereof.
In an embodiment of this invention R2 is (3,4-dichlorophenyl)methyl;
R1 is (3-hydroxy-2,2-dimethyl-propyl), 2,2-dimethylpropyl, 2-methylpropyl or 3,3-dimethylbutyl;
R3 is hydrogen;
R4 is hydrogen;
R5 to R7 are independently selected from hydrogen, bromo, fluoro and chloro;
or an enantiomer thereof.
In an embodiment of this invention R2 is (3-chlorophenyl)methyl;
R1 represents (3-hydroxy-2,2-dimethyl-propyl), 2-methylpropyl, 2,2-dimethylpropyl, 3,3-dimethylbutyl, (4-hydroxyphenyl)methyl or (3-cyanophenyl)methyl;
R3 is hydrogen;
R4 is hydrogen;
R5 to R7 are independently selected from hydrogen, bromo, fluoro and chloro;
or an enantiomer thereof.
In an embodiment of this invention R2 is (3-cyano-4-fluoro-phenyl)methyl;
R1 is (2-chloro-4-fluoro-phenyl)methyl, [3,5-bis(trifluoromethyl)phenyl]methyl, (3-cyano-4-fluoro-phenyl)methyl, 2-phenylethyl, benzyl, (3,4-difluorophenyl)methyl, (2-phenylphenyl)methyl or 2-(4-chlorophenyl)propyl;
R3 is hydrogen;
R4 is hydrogen;
R5 to R7 are independently selected from hydrogen, bromo, fluoro and chloro;
or an enantiomer thereof.
In an embodiment of this invention R2 is (3-cyanophenyl)methyl;
R1 is (2-phenylphenyl)methyl, (3-chlorophenyl)methyl, (3,4-difluorophenyl)methyl, [3,5-bis(trifluoromethyl)phenyl]methyl or [4-(trifluoromethyl)phenyl]methyl;
R3 is hydrogen;
R4 is hydrogen;
R5 to R7 are independently selected from hydrogen, bromo, fluoro and chloro;
or an enantiomer thereof.
In an embodiment of this invention R2 is (4-fluorophenyl)methyl;
R1 is [(4-chlorophenyl)-pyridin-4-yl-methyl], [(4-fluorophenyl)-pyridin-3-yl-methyl], (phenyl-pyridin-2-yl-methyl), 2-(4-methoxyphenyl)ethyl, (4-chlorophenyl)methyl, (2-phenylphenyl)methyl, benzhydryl, (2-pyridin-3-ylphenyl)methyl, (3,4-difluorophenyl)methyl, (1-fluoro-3-phenyl-propan-2-yl), (1-methylpyrrol-2-yl)methyl, (2-phenylphenyl)methyl, 2-(4-chlorophenyl)propyl, 1-(4-chlorophenyl)ethyl, 2-(4-chlorophenyl)propan-2-yl, 2-(4-fluorophenyl)propan-2-yl, 2-phenylpropan-2-yl;
R3 is hydrogen;
R4 is hydrogen;
R5 to R7 are independently selected from hydrogen, bromo, fluoro and chloro;
or an enantiomer thereof.
In an embodiment of this invention R2 is (4-hydroxyphenyl)methyl;
R1 is (3,4-difluorophenyl)methyl, (3-chlorophenyl)methyl, [3,5-bis(trifluoromethyl)phenyl]methyl or [4-(trifluoromethyl)phenyl]methyl;
R3 is hydrogen;
R4 is hydrogen;
R5 to R7 are independently selected from hydrogen, bromo, fluoro and chloro;
or an enantiomer thereof.
In an embodiment of this invention R2 is [2-trifluoromethyl)phenyl]methyl;
R1 is (2-methoxyphenyl)methyl, (2-fluorophenyl)methyl, benzhydryl, 2-(4-chlorophenyl)ethyl, [4-(piperidine-1-carbonyl)phenyl]methyl, 2-(4-chlorophenyl)propyl, (2-phenylphenyl)methyl, 1-phenylpropyl, 2-phenylpropyl, 4-phenylbutan-2-yl, 2-phenylethyl,
3-phenylpropyl, 2-methylbutyl, cyclohexylmethyl, (3-fluorophenyl)methyl, (2-ethoxyphenyl)methyl, [4-(trifluoromethoxy)phenyl]methyl or (3,4-difluorophenyl)methyl
R3 is hydrogen;
R4 is hydrogen;
R5 to R7 are independently selected from hydrogen, bromo, fluoro, chloro, methoxy or methyl;
or an enantiomer thereof.
In an embodiment of this invention R2 is [3-difluoromethoxy)phenyl]methyl;
R1 is 1-phenylethyl, (3-hydroxy-2,2-dimethyl-propyl), 3,3-dimethylbutyl or 2,2-dimethylpropyl;
R3 is hydrogen;
R4 is hydrogen;
R5 to R7 are independently selected from hydrogen, bromo, fluoro and chloro;
or an enantiomer thereof.
In an embodiment of this invention R2 is [3-trifluoromethoxy)phenyl]methyl;
R1 represents 3,3-dimethylbutyl or 2,2-dimethylpropyl;
R3 is hydrogen;
R4 is hydrogen;
R5 to R7 are independently selected from hydrogen, bromo, fluoro and chloro;
or an enantiomer thereof.
In an embodiment of this invention R2 is [3-trifluoromethyl)phenyl]methyl;
R1 is (3-hydroxy-2,2-dimethyl-propyl), 2-methylpropyl, 3,3-dimethylbutyl, 2,2-dimethylpropyl or (1-methylpyrrol-2-yl)methyl;
R3 is hydrogen;
R4 is hydrogen;
R5 to R7 are independently selected from hydrogen, bromo, fluoro and chloro;
or an enantiomer thereof.
In an embodiment of this invention R2 is [4-difluoromethoxy)phenyl]methyl;
R1 is 2-methylpropyl, 3,3-dimethylbutyl, 2,2-dimethylpropyl, (2-chloro-4-fluoro-phenyl)methyl, 2-(4-chlorophenyl)propyl or [3,5-bis(trifluoromethyl)phenyl]methyl;
R3 is hydrogen;
R4 is hydrogen;
R5 to R7 are independently selected from hydrogen, bromo, fluoro and chloro;
or an enantiomer thereof.
In an embodiment of this invention R2 is [6-(trifluoromethyl)pyridin-3-yl]methyl;
R1 is 2-(4-chlorophenyl)propyl or (2-phenylphenyl)methyl;
R3 is hydrogen;
R4 is hydrogen;
R5 to R7 are independently selected from hydrogen, bromo, fluoro and chloro;
or an enantiomer thereof.
In an embodiment of this invention R2 is 2-(1H-indol-3-yl)ethyl;
R1 is 2-(4-chlorophenyl)propyl, 2-(2-phenoxyphenyl)ethyl, 2-[4-(diethylcarbamoyl)phenyl]ethyl, 2-(3-fluorophenyl)ethyl, 2-[2-(trifluoromethoxy)phenyl]ethyl, 2-(4-fluorophenyl)ethyl, 2-(3,5-dimethoxyphenyl)ethyl, 2-(4-phenylphenyl)ethyl, 2-(4-phenoxyphenyl)ethyl, 2-(2-ethoxyphenyl)ethyl or 2-benzo[1,3]dioxol-5-ylethyl, 2,2-dimethylpropyl, 3,3-dimethylbutyl;
R3 is hydrogen;
R4 is hydrogen;
R5 to R7 are independently selected from hydrogen, bromo, fluoro and chloro;
or an enantiomer thereof.
In an embodiment of this invention R2 is 2-(2,4-dichlorophenyl)ethyl;
R1 is 2-methylpropyl, 3,3-dimethylbutyl or 2,2-dimethylpropyl;
R3 is hydrogen;
R4 is hydrogen;
R5 to R7 are independently selected from hydrogen, bromo, fluoro and chloro;
or an enantiomer thereof.
In an embodiment of this invention R2 is 2-(2,6-dichlorophenyl)ethyl;
R1 is 2-methylpropyl, 3,3-dimethylbutyl or 2,2-dimethylpropyl;
R3 is hydrogen;
R4 is hydrogen;
R5 to R7 are independently selected from hydrogen, bromo, fluoro and chloro;
or an enantiomer thereof.
In an embodiment of this invention R2 is 4,4,4-trifluorobutyl;
R1 is [2-(trifluoromethyl)phenyl]methyl, [(1R)-1-phenylethyl], benzhydryl, 2-(4-chlorophenyl)propyl, (2-phenylphenyl)methyl, (2-phenoxyphenyl)methyl, (2-phenylphenyl)methyl, 2-(4-chlorophenyl)ethyl, 2-(4-fluorophenyl)ethyl, 2-(4-fluorophenyl)propyl, 2-(4-chlorophenyl)propan-2-yl, 2-(4-fluorophenyl)propan-2-yl or 2-phenylpropan-2-yl;
R3 is hydrogen;
R4 is hydrogen;
R5 to R7 are independently selected from hydrogen, —OH, methyl, bromo, fluoro and chloro;
or an enantiomer thereof.
In an embodiment of this invention R2 is 4,4-difluorobutyl;
R1 is (2-cyclopentylphenyl)methyl, [2-(trifluoromethyl)phenyl]methyl, [(1R)-1-phenylethyl], (2-phenylphenyl)methyl, benzhydryl, 2-(4-chlorophenyl)propyl or (2-phenylphenyl)methyl;
R3 is hydrogen;
R4 is hydrogen;
R5 to R7 are independently selected from hydrogen, bromo, fluoro and chloro;
or an enantiomer thereof.
In an embodiment of this invention R2 is benzyl;
R1 represents benzyl, benzhydryl, [2-(trifluoromethyl)phenyl]methyl, (2-pyridin-3-ylphenyl)methyl, (4-phenoxyphenyl)methyl, (2,4-difluorophenyl)methyl, [4-(difluoromethoxy)phenyl]methyl, [3-(difluoromethoxy)phenyl]methyl, (3-pyrrol-1-ylphenyl)methyl, (3-fluorophenyl)methyl, (4-cyanophenyl)methyl, (3,5-dimethoxyphenyl)methyl, (2-methoxyphenyl)methyl, (2-ethoxyphenyl)methyl, [4-(trifluoromethyl)phenyl]methyl, (3,4-difluorophenyl)methyl, (2,5-dimethylphenyl)methyl, [3,5-bis(trifluoromethyl)phenyl]methyl, (2-methylphenyl)methyl, (2,3-difluorophenyl)methyl, (2-bromophenyl)methyl, [(4-fluorophenyl)-pyridin-3-yl-methyl], [(4-chlorophenyl)-pyridin-4-yl-methyl], (phenyl-pyridin-2-yl-methyl), (1-methyl-5-phenyl-pyrazol-3-yl)methyl, (5-methyl-2-phenyl-1,3-oxazol-4-yl)methyl, (5-methyl-3-phenyl-1,2-oxazol-4-yl)methyl, (3-phenyl1,2-oxazol-5-yl)methyl, 2-(4-chlorophenyl)ethyl, 2-(4-fluorophenyl)ethyl, 2-[4-(trifluoromethyl)phenyl]ethyl, 2-(5-bromo-2-methoxy-phenyl)ethyl, 2-(3-bromo-4-methoxy-phenyl)ethyl, 2-(4-fluorophenyl)propyl, 2-(4-chlorophenyl)propyl, 4-phenylbutan-2-yl, [2-(4-chloro-2-methyl-phenyl)-2,2-difluoro-ethyl], 2-naphthalen-1-ylpropyl, (2-methyl-2-phenyl-propyl), 2-phenoxypropyl, 2-(4-fluorophenoxy)propyl, 2-phenylpropan-2-yl, cycloheptyl, 2-(2-methoxyphenyl)ethyl, 1-naphthalen-1-ylethyl, 2-[3-(trifluoromethyl)phenyl]ethyl, 2-(6-chloro-1H-indol-3-yl)ethyl, 2-(4-chlorophenyl)propyl, [(1R)-1-(4-methoxyphenyl)ethyl], [(1R)-1-(3-methoxyphenyl)ethyl], 4-phenylbutan-2-yl, 1-phenylethyl, 2-phenylethyl, 1-naphthalen-2-ylethyl, 2-(1-cyclohexenyl)ethyl, 1-(4-fluorophenyl)ethyl, 2-(4-fluorophenyl)propan-2-yl, 2-phenylpropan-2-yl, 1-phenylpropyl or (2-phenylphenyl)methyl;
R3 is hydrogen;
R4 is hydrogen;
R5-R7 are independently selected from hydrogen, bromo, fluoro and chloro, —OH, methyl, or methoxy;
or an enantiomer thereof.
In an embodiment of this invention R2 is n-butyl;
R1 is (2-phenylphenyl)methyl, (2-phenoxyphenyl)methyl, [2-(4-fluorophenoxy)phenyl]methyl, 2-(3-fluorophenyl)ethyl, 2-(4-fluorophenyl)ethyl, 2-(4-chlorophenyl)ethyl, 2-[4-(trifluoromethyl)phenyl]ethyl, 2-(4-chlorophenyl)propyl, 2-(4-fluorophenyl)propyl, (2-phenylphenyl)methyl, 2-(4-phenylphenyl)ethyl, 2-naphthalen-1-ylpropyl,
2-(2-ethoxyphenyl)ethyl, 2-(2-phenoxyphenyl)ethyl, 2-(4-phenoxyphenyl)ethyl, 2-[2-(trifluoromethoxy)phenyl]ethyl, 2-(3,5-dimethoxyphenyl)ethyl, 2-benzo[1,3]dioxol-5-ylethyl,
(1-fluoro-3-phenyl-propan-2-yl), 2-(4-chlorophenyl)propyl, naphthalen-1-ylmethyl, 1-naphthalen-2-ylethyl, (2-phenylphenyl)methyl, [2-(4-chlorophenyl)-2-methyl-propyl];
R3 is hydrogen;
R4 is hydrogen;
R5 to R7 are independently selected from hydrogen, bromo, fluoro, chloro, —OH, methyl, methoxy;
or an enantiomer thereof.
In an embodiment of this invention R2 is ethyl;
R1 is benzhydryl, (2-phenylphenyl)methyl or 2-(4-chlorophenyl)propyl
R3 is hydrogen;
R4 is hydrogen;
R5 to R7 are independently selected from hydrogen, bromo, fluoro, chloro, —OH, methyl, methoxy;
or an enantiomer thereof.
In an embodiment of this invention R2 is 2-phenylethyl;
R1 is (2-phenylphenyl)methyl, 2-(4-methoxyphenyl)ethyl, (4-chlorophenyl)methyl, 2-(4-chlorophenyl)ethyl, 2-(3,4-dichlorophenyl)ethyl, (3,4-difluorophenyl)methyl, 2-(4-chlorophenyl)propyl, (2-chloro-4-fluoro-phenyl)methyl or 4-phenylbutan-2-yl;
R3 is hydrogen;
R4 is hydrogen;
R5 to R7 are independently selected from hydrogen, bromo, fluoro, chloro, —OH, methyl, methoxy;
or an enantiomer thereof.
In an embodiment of this invention R2 is propyl;
R1 is (2-phenylphenyl)methyl, benzhydryl or 2-(4-chlorophenyl)propyl;
R3 is hydrogen;
R4 is hydrogen;
R5 to R7 are independently selected from hydrogen, bromo, fluoro, chloro, —OH, methyl, methoxy;
or an enantiomer thereof.
In an embodiment of this invention R2 is pyridin-3-ylmethyl or pyridin-4-ylmethyl;
R1 is (2-phenylphenyl)methyl, 2-(4-chlorophenyl)propyl, (3,4-difluorophenyl)methyl, (2-chloro-4-fluoro-phenyl)methyl or 1-(4-fluorophenyl)ethyl;
R3 is hydrogen;
R4 is hydrogen;
R5 to R7 are independently selected from hydrogen, bromo, fluoro, chloro, —OH;
or an enantiomer thereof.
In an embodiment of this invention R2 is tert-butyl;
R1 is (2-phenylphenyl)methyl, [2-(trifluoromethyl)phenyl]methyl, [4-(difluoromethoxy)phenyl]methyl, (2-chlorophenyl)methyl, (2-methoxyphenyl)methyl, (3,4-difluorophenyl)methyl, (3,4-difluorophenyl)methyl, (4-phenoxyphenyl)methyl, [3,5-bis(trifluoromethyl)phenyl]methyl, (4-fluoro-2-phenyl-phenyl)methyl, (5-fluoro-2-phenyl-phenyl)methyl, 1-phenylethyl, 2-(4-chlorophenyl)ethyl, 2-(2-phenoxyphenyl)ethyl, 2-[2-(trifluoromethoxy)phenyl]ethyl, 2,2-diphenylethyl, 2-(4-fluorophenyl)propyl, 2-(4-chlorophenyl)propyl, (2-phenylphenyl)methyl, 2-(4-phenylphenyl)ethyl, [2-(3-fluorophenyl)phenyl]methyl, [2-(4-fluorophenyl)phenyl]methyl, [2-(3,4-difluorophenyl)phenyl]methyl, [2-(2,4-difluorophenyl)phenyl]methyl, [2-(2,5-difluorophenyl)phenyl]methyl, [2-(2,4-dichlorophenyl)phenyl]methyl, [2-(3,4-dichlorophenyl)phenyl]methyl, [2-(2-chlorophenyl)phenyl]methyl, [2-(4-chlorophenyl)phenyl]methyl, [2-(4-methylphenyl)phenyl]methyl, [2-(4-fluoro-2-methyl-phenyl)phenyl]methyl, [2-(4-methoxyphenyl)phenyl]methyl, [4-fluoro-2-(4-fluorophenyl)phenyl]methyl, [2-(3-chloro-4-fluoro-phenyl)phenyl]methyl, [2-(4-fluoro-2-methyl-phenyl)phenyl]methyl, [5-fluoro-2-(4-fluorophenyl)phenyl]methyl, benzhydryl, [(1R)-2-(4-chlorophenyl)-1-(4,4,4-trifluorobutylcarbamoyl)ethyl], [3,5-bis(trifluoromethyl)phenyl]methyl, 9H-fluoren-9-yl, [2-[4-(trifluoromethyl)phenoxy]phenyl]methyl, 2-naphthalen-1-ylpropyl, [(1R)-2-(4-chlorophenyl)-1-methoxycarbonyl-ethyl], (1-methyl-5-phenyl-pyrazol-3-yl)methyl or [2-(4-chloro-2-methyl-phenyl)-2,2-difluoro-ethyl], (3-phenylphenyl)methyl, (4-fluorophenyl)methyl, (4-phenylphenyl)methyl, [(4-chlorophenyl)-pyridin-4-yl-methyl], 2-(4-fluorophenyl)propyl, 2-(4-phenoxyphenyl)ethyl;
R3 is hydrogen;
R4 is hydrogen;
R5 to R7 are independently —OH, bromo, chloro, fluoro, methyl, methoxy methylsulfonylamino, trimethylsilyl, cyano, —OCHF2, —OCH2F, —OSO2CF3,
or an enantiomer thereof.
In an embodiment of this invention R2 is trimethylsilylmethyl;
R1 is [3-(difluoromethoxy)phenyl]methyl, [4-(difluoromethoxy)phenyl]methyl, naphthalen-1-ylmethyl, 1-naphthalen-1-ylethyl, 2-(4-bromophenyl)ethyl, (2-chloro-6-phenoxy-phenyl)methyl or (3,4-dichlorophenyl)methyl;
R3 is hydrogen;
R4 is hydrogen;
R5 is R7 are independently selected from hydrogen, bromo, fluoro, chloro;
or an enantiomer thereof.
In one embodiment of the invention the compound of the invention is according to formula I as defined above but also including proviso d), in addition to provisos a), b) and c), that when R2 represents —(CH2)kN(R19a)(R19b), wherein k represents 2; and R19a and R19b represent methyl;
or R2 represents Het4 selected from thiazolyl or pyridyl;
or R2 represents phenyl substituted by dimethylamino;
and R5-R7 are selected from C1-C3 alkyl, —OR36, wherein R36 is selected from C1-C3 alkyl; then R1 does not represent phenyl, benzyl, pyridyl, pyridylmethyl, pyrimidinyl, cyclohexyl, methylpiperazinyl, indanyl or naphthyl, optionally substituted by one to three substituents selected from halogen such as fluoro, chloro, bromo, iodo, hydroxy, C1-C4 alkyl such as methyl, ethyl, propyl, isopropyl, butyl, C1-C4 alkoxy such as methoxy, ethoxy, propoxy, isopropoxy and butoxy, trifluoromethyl, C1-C3 alkyl substituted by at least one fluorine atoms, such as trifluoromethoxy, trifluoroethoxy and trifluoropropoxy, amide, carboxy, cyano, C1-C4 alkylthio such as methylthio, ethylthio, propylthio and butylthio, nitro, amino, methylamino, dimethylamino, dimethylaminomethyl, dipropylaminomethyl, methylenedioxy, phenoxy, benzyloxy, C2-C5 alkanoyloxy such as acetoxy, propionyloxy and butyryloxy, C1-C3 ω-hydroxyalkyl such as hydroxymethyl, hydroxyethyl, C2-C5 alkanoyloxy-C1-C3 alkyl such acetyloxymethyl, acetylocyethyl and propionyloxymethyl, C2-C5 alkanoylamino such as acetylamino and propionylamino; alkoxycarbonyl such as methoxycarbonyl, ethoxycarbonyl, propoxycarbonyl, isopropoxycarbonyl and butoxycarbonyl, phenoxycarbonyl and benzyloxycarbonyl.
Unless otherwise specified, alkyl groups and alkoxy groups as defined herein may be straight-chain or, when there is a sufficient number (i.e. a minimum of three) of carbon atoms be branched-chain, or cyclic. Further, when there is a sufficient number (i.e. a minimum of four) of carbon atoms, such alkyl and alkoxy groups may also be part cyclic/acyclic. Unless otherwise specified, alkyl and alkoxy groups may also be substituted by one or more halogen atoms, and especially fluoro atoms. Unless otherwise specified the cyclic alkyl, for example C3-C8 cycloalkyl may optionally be substituted by one or more substituents selected from —OH, oxo, halo, cyano, nitro, amino, alkylamino, C1-6 alkyl, C1-6 alkoxy, aryl, aryloxy or a Het group.
Alkylene groups as defined herein are divalent and may be straight-chain or, when there is a sufficient number (i.e. a minimum of three) of carbon atoms, be branched-chain. Unless otherwise specified, alkylene groups may also be substituted by one or more halogen atoms, and especially fluoro atoms.
The term “aryl”, when used herein, includes C6-10 aryl groups such as phenyl, naphthyl and the like. The term “aryloxy”, when used herein includes C6-10 aryloxy groups such as phenoxy, naphthoxy and the like. For the avoidance of doubt, aryloxy groups referred to herein are attached to the rest of the molecule via the O-atom of the oxy-group. Unless otherwise specified, aryl and aryloxy groups may be substituted by one or more substituents including —OH, halo, cyano, nitro, C1-6 alkyl, C1-6 alkoxy, sulfamoyl, methylsulfonyl, aryl, anilino and methylsulfinyl. When substituted, aryl and aryloxy groups are preferably substituted by between one and three substitutents.
The terms “halo” and “halogen”, when used herein, include fluoro, chloro, bromo and iodo.
Het (Het1-Het76) groups that may be mentioned include those containing 1 to 4 heteroatoms (selected from the group oxygen, nitrogen and/or sulfur) and in which the total number of atoms in the ring system are between five and twelve. Het groups may be fully saturated, wholly aromatic, partly aromatic and/or bicyclic in character. Heterocyclic groups that may be mentioned include benzodioxanyl, benzodioxepanyl, benzodioxolyl, benzofuranyl, benzimidazolyl, benzomorpholinyl, benzotriazol, benzoxazinonyl, benzothiophenyl, chromanyl, cinnolinyl, dioxanyl, dioxothiolanyl, furanyl, imidazolyl, imidazo[1,2-a]pyridinyl, indolyl, isoquinolinyl, isoxazolyl, morpholinyl, oxopyrrolidinyl, oxopiperidinyl, oxazolyl, phthalazinyl, piperazinyl, piperidinyl, purinyl, pyranyl, pyrazinyl, pyrazolyl, pyridinyl, pyrimindinyl, pyrrolidinonyl, pyrrolidinyl, pyrrolinyl, pyrrolyl, quinazolinyl, quinolinyl, tetrahydropyranyl, tetrahydrofuranyl, tetrazole, thiazolyl, thienyl, thiochromanyl, triazolyl and the like. Substituents on Het groups may, where appropriate, be located on any atom in the ring system including a heteroatom. The point of attachment of Het groups may be via any atom in the ring system including (where appropriate) a heteroatom, or an atom on any fused carbocyclic ring that may be present as part of the ring system. Het groups may also be in the N- or S-oxidised form.
Unless otherwise specified, the Het group may optionally be substituted by one or more substituents selected from —OH, oxo, halo, cyano, nitro, C1-6 alkyl, C1-6 alkoxy, aryl, aryloxy or a further Het group.
Further, the term “hydrocarbon” refers to any structure comprising only carbon and hydrogen atoms.
The term “hydrocarbon radical” or “hydrocarbyl” refers to any structure as a result of removing one or more hydrogens from a hydrocarbon.
The term “alkenyl” refers to a monovalent straight or branched chain alkyl group having at least one carbon-carbon double bond. The double bond of an alkenyl can be unconjugated or conjugated to another unsaturated group. Unless otherwise specified, alkenyl groups as defined herein may be straight-chain or, when there is a sufficient number (i.e. a minimum of three) of carbon atoms be branched-chain, or cyclic. Further, when there are a sufficient number (i.e. a minimum of four) of carbon atoms, such alkenyl group may also be part cyclic/acyclic. Unless otherwise specified, alkenyl groups may also be substituted by one or more halogen atoms, and especially fluoro atoms.
The term “heteroalkyl” refers to a radical formed as a result of replacing one or more carbon atom of an alkyl with one or more heteroatoms selected from N, O and S.
The compounds of the invention may exhibit tautomerism. All tautomeric forms and mixtures thereof are included within the scope of the invention.
The compounds of the invention may also contain one or more asymmetric carbon atoms and may therefore exhibit optical and/or diastereoisomerism. Diastereoisomers may be separated using conventional techniques, e.g. chromatography or fractional crystallisation. The various stereoisomers may be isolated by separation of a racemic or other mixture of the compounds using conventional, e.g. fractional crystallisation or HPLC, techniques. Alternatively the desired optical isomers may be made by reaction of the appropriate optically active starting materials under conditions which will not cause racemisation or epimerisation, or by derivatisation, for example with a homochiral acid followed by separation of the diastereomeric esters by conventional means (e.g. HPLC, chromatography over silica). All stereoisomers are included within the scope of the invention. All enantiomers, and mixtures thereof, are included within the scope of the invention.
Abbreviations are listed at the end of this specification.
Illustrative examples of any substituent, R group or any part of such groups include, but are not limited to:
Illustrative examples of substituent Het are benzodioxanyl, benzotriazol, furanyl, imidazolyl, indolyl, oxazolyl, piperazinyl, pyrazinyl, pyrazolyl, pyridinyl, pyrimindinyl, pyrrolidinyl, pyrrolyl and thienyl.
Compounds of the invention that may be mentioned are those wherein R1 represents (2-phenylphenyl)methyl, (4-phenoxyphenyl)methyl, 2-phenoxyphenyl methyl, 2-(4-chlorophenyl)propyl, 2-(trifluoromethyl)phenylmethyl, 2,2-dimethylpropyl, benzhydryl, 1-phenylethyl or 2,2-dimethylpropyl, [2-(3,4)-difluorophenyl)phenyl]-methyl, [2-(4-chlorophenyl)-2-methyl-propyl], [4-fluoro-2-(4-fluorophenyl)phenyl]methyl, (4-fluoro-2-phenyl-phenyl)methyl, [5-fluoro-2-(4-fluorophenyl)phenyl]methyl, (5-fluoro-2-phenyl-phenyl)methyl, 1-(4-fluorophenyl)ethyl, 2-(4-chlorophenyl)propan-2-yl, 2-(4-fluorophenyl)propan-2-yl or 1-(4-chlorophenyl)ethyl.
Compounds of the invention that may be mentioned are those wherein R2 represents ethyl, propyl, butyl, tert-butyl, 4,4-difluorobutyl, 4,4,4-trifluorobutyl, methoxycarbonylmethyl, benzyl, 3,4-dichlorophenylmethyl, (4-fluorophenyl)methyl, [3-(difluoromethoxy)phenyl]methyl, (5-oxo-1-propan-2-yl-pyrrolidin-3-yl)methyl, propan-2-ylcarbamoylmethyl, (2-fluorophenyl)methyl, (3-fluorophenyl)methyl, 1-phenylethyl, 2-phenylpropan-2-yl or 5-cyanopentyl.
Compounds of the invention that may be mentioned include those in which aryl is phenyl, optionally substituted by one or more of the following fluoro, chloro, hydroxy, methoxy, cyano, carbamoyl, dialkylamino, methylsulfonyl, trifluoromethyl, aminoalkyl, difluoromethoxy.
Compounds of the invention that may be mentioned are those where at least one of the substituents in R1 and R2 is an aryl.
Compounds of the invention that may be mentioned are those having R1 selected from bulky and branched sidechains, for example biphenyls, benzhydryls (diphenylmethyl), branched phenethyls and tertiary butyl groups; and R2 is selected from benzyl and lipophilic groups. Lipophilic groups are selected from, for example, tertiary butyl, 4,4-difluorobutyl, 4,4,4-trifluorobutyl and n-butyl.
In one embodiment the compound of the invention is according to formula I
wherein
R1 represents C1-C12 alkyl (which alkyl group is optionally substituted by one or more groups selected from halogen, C2-C6 alkenyl, cyano, oxo, —OR8, —SR10, —COXR11, —N(R12a)(R12b), —N(R13a)C(O)OR13b, —OC(O)N(R14a)(R14b), —SO2R15, aryl or Het1); further R1 represents aryl or Het2;
R8, R10, R11, R13a, R13b, R15 independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het9 (which C1-C6 alkyl, aryl and Het9 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het10);
R12a and R12b independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het11 (which C1-C6 alkyl, aryl and Het11 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het12);
R14a and R14b independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het13 (which C1-C6 alkyl, aryl and Het13 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het14);
R2 represents C1-C12 alkyl (which alkyl group is optionally substituted by one or more groups selected from halogen, C2-C6 alkenyl, trialkylsilyl, —COXR18, aryl or Het3); further R2 represents —(CH2)kN(R19a)(R19b), —(CH2)kNR20aC(O)N(R21b)(R20c), —(C2)nNR21aSO2R21b, —(CH2)nSO2R22, —OC(O)N(R24a)(R24b), aryl or Het4;
R18, R21, R22 independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het15 (which C1-C6 alkyl, aryl and Het15 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het16);
R19a and R19b independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het19 (which C1-C6 alkyl, aryl and Het19 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het20)
R20a, R20b and R20c independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het21 (which C1-C6 alkyl, aryl and Het21 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het22);
R3 represents hydrogen, C1-C12 alkyl (which alkyl group is optionally substituted by one or more groups selected from halogen, C2-C6 alkenyl, trialkylsilyl, —COXR27, aryl or Het5); further R3 represents —(CH2)kN(R28a)(R28b), —(CH2)kN(R29a)C(O)N(R29b)(R29c), —(CH2)nNR30aSO2R30b, —(CH2)nSO2R31, —OC(O)N(R33a)(R33b), aryl or Het6;
R27R30a, R30b, R31 independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het23 (which C1-C6 alkyl, aryl and Het23 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het24);
R28a and R28b independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het25 (which C1-C6 alkyl, aryl and Het25 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het26);
R33a and R33b independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het27 (which C1-C6 alkyl, aryl and Het27 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het28);
R29a, R29b, and R29c independently represent, at each occurrence, hydrogen, C1-C6 alkyl aryl or Het29 (which C1-C6 alkyl, aryl and Het29 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het30);
R4 represents hydrogen, —OH, aryl, C1-C6 alkyl (which alkyl group is optionally substituted by one or more groups selected from halogen, hydroxy, C2-C4 alkenyl, trialkylsilyl), —OR34, —(CH2)mR35;
R34 independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het31 (which C1-C6 alkyl, aryl and Het31 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het32);
R35 independently represent aryl or Het33 (which aryl and Het33 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het34);
R5 to R7 independently represent, at each occurrence, hydrogen, —OH, halogen, cyano, nitro, C1-6 alkyl, —OR36, —N(R37a)(R37b), —C(O)R38, —C(O)OR39, —C(O)N(R40a)(R40b), —NC(O)OR41, OC(O)N(R42a)(R42b), —N(R43a)C(O)R43b, —N(R44a)S(O)2R44b, —S(O)2R45, —OS(O)2R46, —(CH2)nN(R47a)(R47b), —(CH2)nNR48aC(O)N(R48a)(R48c), —(CH2)nNR49aSO2R49b, trialkylsilyl, aryl or Het7;
R36, R38, R39, R41, R43, R44a, R44b, R45, R46, R49a and R49b independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het35 (which C1-C6 alkyl, aryl and Het35 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het36);
R37a and R37b independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het37 (which C1-C6 alkyl, aryl and Het37 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het38);
R40a and R40b independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het39 (which C1-C6 alkyl, aryl and Het39 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het40);
R42a and R42b independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het41 which C1-C6 alkyl, aryl and Het41 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het42);
R47a and R47b independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het43 (which C1-C6 alkyl, aryl and Het43 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het44);
R48a, R48b and R48c independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het45 (which C1-C6 alkyl, aryl and Het45 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het46);
aryl is, at each occurrence, optionally substituted by —OH, halogen, cyano, nitro, C1-C6 alkyl, C3-C8 cycloalkyl, C2-C6 alkenyl, aryl, Het8, —OR50, —(CH2)mR51, —SR52, —C(O)R53, —COXR54, N(R55a)(R55b), —SO2R56, —OS(O)2R57, —(CH2)mN(R58a)(R58b), —CH2)mNR59aC(O)N(R59b)(R59c), —C(O)OR60, —C(O)N(R61a)(R61b), —N(R62aC(O)R62b, N(R63a)C(O)OR63b, —OC(O)N(R64a)(R64b), —N(R65a)S(O)2R65b and OC(O)R66;
R50 to R54, R56, R57, R60, R62a, R62b, R63a, R63b, R65a, R65b and R66 independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het47 (which C1-C6 alkyl, aryl and Het47 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het48);
R51 independently represent aryl or Het49 (which aryl and Het49 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het50);
R55a and R55b independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het51 (which C1-C6 alkyl, aryl and Het51 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het52),
R58a and R58b independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het53 (which C1-C6 alkyl, aryl and Het53 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het54),
R59a, independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het55 (which C1-C6 alkyl, aryl and Het55 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het56);
R61a and R61b independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het57 (which C1-C6 alkyl, aryl and Het57 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het58);
R64a and R64b independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het59 (which C1-C6 alkyl, aryl and Het59 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het60);
Het1 to Het60 independently represent, at each occurrence, five- to twelve-membered heterocyclic groups containing one or more heteroatoms selected from oxygen, nitrogen and/or sulfur, which groups are optionally substituted by one or more substituents selected from —OH, oxo, halo, cyano, nitro, C1-6 alkyl, C2-6 alkenyl, aryl, a further Het, —OR67, —(CH2)mR68, —SR69, —COXR70, —N(R71a)(R71b), —SO2R72, —(CH2)mN(R73a)(R73b), —(CH2)mNR74aC(O)N(R74b)(R74c), —C(O)R75, —C(O)OR76, —C(O)N(R77a)(R77b), —N(R78a)C(O)R78b, —N(R79a)S(O)2R79b, OC(O)R80, —NC(O)OR81, —OC(O)N(R82a)(R82b);
R67, R69, R70, R72, R75, R76, R78a, R78b, R79a, R79b, R80 or R81 independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het61 (which C1-C6 alkyl, aryl and Het61 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het62);
R68 represents aryl or Het63 (which aryl and Het63 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het64);
R71a and R71b independently represent, at each occurrence, hydrogen, C1-C6 alkyl, aryl or Het65 (which C1-C6 alkyl, aryl and Het65 groups are optionally substituted with one or more substituents selected from —OH, halogen, cyano, nitro, C1-C6 alkyl, aryl and Het66),
In one embodiment the compound of the invention is according to formula I
wherein
R4 represents —OH, aryl, C1-C6 alkyl (which alkyl group is optionally substituted by one or more groups selected from halogen, hydroxy, C2-C4 alkenyl, trialkylsilyl), —OR34, —(CH2)mR35.
Preparation
According to the invention there is also provided a process for the preparation of compounds of formula I which comprises:
reaction of a compound of formula II,
wherein R3 to R5 are as hereinbefore defined, with an amine R1—NH2 and an isonitrile R2—NC under standard Ugi reaction conditions to give compounds of Formula I wherein R1 to R5 are as hereinbefore defined
According to the invention there is also provided a process for the preparation of compounds of formula I which comprises reaction of a compound of formula III with an amine under standard amide coupling reaction conditions.
wherein R1 to R7 are as hereinbefore defined.
According to the invention there is also provided a process for the preparation of a compound of formula I which comprises a four-component UGI reaction with an amine, acid, aldehyde and isonitrile to the intermediate compound (IV)
Compound (IV) is then undergoing intramolecular Diels-Alder reaction according to literature methods to give compounds of formula I.
The synthetic sequence originated in a published procedure: D. L. Wright, C. V. Robotham and K. Aboud, Tetrahedron Lett. 2002, 43, 943-946.
According to the invention there is also provided a process for the preparation of a compound of formula I which comprises a four-component UGI reaction with an amine, acid, aldehyde and isonitrile to the intermediate compound (V)
Compound (V) is then undergoing intramolecular Diels-Alder reaction according to literature methods to give compounds of formula I
A similar reaction is described in J. Org. Chem. 2004, 69, 1207-1214.
For the avoidance of doubt it is to be understood that where in this specification a group is qualified by ‘hereinbefore defined’, ‘defined hereinbefore’ or ‘defined above’ the said group encompasses the first occurring and broadest definition as well as each and all of the particular definitions for that group.
The prefixes n-, s-, i- t-, tert- have their usual meanings: normal, secondary, iso and tertiary.
The skilled person will also appreciate that various standard substituent or functional group interconversions and transformations within certain compounds of formula I will provide other compounds of formula I. For example, carbonyl may be reduced to hydroxy or alkylene, and hydroxy may be converted to halogen, and iodo, bromo and chloro may be converted to cyano.
The compounds of the invention may be isolated from their reaction mixtures using conventional techniques.
It will be appreciated by those skilled in the art that, in the process described above, the functional groups of intermediate compounds may be, or may need to be, protected by protecting groups.
Functional groups which it is desirable to protect include hydroxy, amino and carboxylic acid. Suitable protecting groups for hydroxy include trialkylsilyl and diarylalkylsilyl groups (e.g. tert-butyldimethylsilyl, tert-butyldiphenylsilyl or trimethylsilyl), tetrahydropyranyl and alkylcarbonyl groups (e.g. methyl- and ethylcarbonyl groups). Suitable protecting groups for amino include benzyl, sulfonamido (e.g. benzenesulfonamido), tert-butyloxycarbonyl, 9-fluorenyl-methoxycarbonyl or benzyloxycarbonyl. Suitable protecting groups for amidino and guanidino include benzyloxycarbonyl. Suitable protecting groups for carboxylic acid include C1-6 alkyl or benzyl esters.
The protection and deprotection of functional groups may take place before or after any of the reaction steps described hereinbefore.
Protecting groups may be removed in accordance with techniques which are well known to those skilled in the art and as described hereinafter.
The use of protecting groups is fully described in “Protective Groups in Organic Chemistry”, edited by J. W. F. McOmie, Plenum Press (1973), and “Protective Groups in Organic Synthesis”, 3rd edition, T. W. Greene & P. G. M. Wutz, Wiley-Interscience (1999).
Persons skilled in the art will appreciate that, in order to obtain compounds of the invention in an alternative, and, on some occasions, more convenient, manner, the individual process steps mentioned herein may be performed in a different order, and/or the individual reactions may be performed at a different stage in the overall route (i.e. substituents may be added to and/or chemical transformations performed upon, different intermediates to those associated hereinbefore with a particular reaction). This will depend inter alia on factors such as the nature of other functional groups present in a particular substrate, the availability of key intermediates and the protecting group strategy (if any) to be adopted. Clearly, the type of chemistry involved will influence the choice of reagent that is used in the said synthetic steps, the need, and type, of protecting groups that are employed, and the sequence for accomplishing the synthesis.
It will also be appreciated by those skilled in the art that, although certain protected derivatives of compounds of formula I, which may be made prior to a final deprotection stage, may not possess pharmacological activity as such, they may be administered parenterally or orally and thereafter metabolised in the body to form compounds of the invention which are pharmacologically active. Such derivatives may therefore be described as “prodrugs”. Moreover, certain compounds of formula I may act as prodrugs of other compounds of formula I.
All prodrugs of compounds of formula I are included within the scope of the invention.
Medical and Pharmaceutical Use
Compounds of the invention are useful because they possess pharmacological activity. They are therefore indicated as pharmaceuticals.
Thus, according to a further aspect of the invention there is provided the compounds of the invention for use as pharmaceuticals.
In particular, the compounds of the invention exhibit potassium channel inhibiting activity, especially Kv1.5 blocking activity, for example as demonstrated in the test described below.
The compounds of the invention are thus expected to be useful in both the prophylaxis and the treatment a condition which is effected or facilitated by Kv1.5 inhibition, in particular cardiac arrhythmias, e.g. atrial fibrillation, atrial flutter, atrial arrhythmia, atrial tachycardia.
The compounds of the invention are thus indicated in the treatment or prophylaxis of cardiac diseases, or in indications related to cardiac diseases, in which arrhythmias, eg atrial fibrillation, atrial flutter, atrial arrhythmia and atrial tachycardia, are believed to play a major role, including ischaemic heart disease, sudden heart attack, myocardial infarction, heart failure, cardiac surgery and thromboembolic events.
According to a further aspect of the invention, there is provided a method of treatment of an arrhythmia which method comprises administration of a therapeutically effective amount of a compound of the invention to a person suffering from, or susceptible to, such a condition.
Pharmaceutical Preparations
The compounds of the invention will normally be administered orally, subcutaneously, intravenously, intraarterially, transdermally, intranasally, by inhalation, or by any other parenteral route, in the form of pharmaceutical preparations comprising the active ingredient. In a pharmaceutically acceptable dosage form. Depending upon the disorder and patient to be treated, as well as the route of administration, the compositions may be administered at varying doses.
The compounds of the invention may also be combined with any other drugs useful in the treatment of arrhythmias and/or other cardiovascular disorders.
According to a further aspect of the invention there is thus provided a pharmaceutical formulation including a compound of the invention in admixture with a pharmaceutically acceptable adjuvant, diluent or carrier.
Suitable daily doses of the compounds of the invention in therapeutic treatment of humans are about 0.005 to 25.0 mg/kg body weight at oral administration and about 0.005 to 10.0 mg/kg body weight at parenteral administration. Examples of daily doses of the compounds of the invention in therapeutic treatment of humans are about 0.005 to 10.0 mg/kg body weight at oral administration and about 0.005 to 5.0 mg/kg body weight at parenteral administration.
The compounds of the invention have the advantage that they are effective against cardiac arrhythmias.
The compounds of the invention may also be combined with any other drugs useful in the treatment of arrhythmias and/or other cardiovascular disorders.
The compounds of the present invention may be employed alone or in combination with each other and/or other suitable therapeutic agents useful in the treatment of the aforementioned disorders or other disorders, including: other antiarrhythmic agents such as Class I agents (e.g. propafenone), Class II agents (e.g., carvadiol and propranolol), Class III agents (e.g. sotalol, dofetilide, amiodarone, azimilide and ibutilide), Class IV agents (e.g. diltiazem and verapamil), 5 HT antagonists (e.g. sulamserol, serraline and trosetron), dronedarone, atrial selective compounds such as RSD1235, cardiac glycosides including digitalis and ouabain, calcium channel blockers (both L-type and T-type) such as diltiazem, verapamil, nifedipine, amlopdipine and mybefradil.
In another aspect of the invention, the compound of formula (I), or a pharmaceutically acceptable salt or solvate thereof, or a solvate of such a salt, may be administered in association with an antithrombotic agents for example anagrelide hydrochloride, bivaliridin, cilostazol, dalteparin sodium, danaparoid sodium, dazoxiben hydrochloride, efegatran sulfate, enoxaparin sodium, fluretofen, ifetroban, ifetroban sodium, lamifiban, lotrafiban hydrochloride, napsagatran, orbofiban acetate, roxifiban acetate, sibrafiban, tinzaparin sodium, trifenagrel, abciximab and zolimomab aritox or pharmaceutically acceptable derivative thereof.
In another aspect of the invention, the compound of formula (I), or a pharmaceutically acceptable salt or solvate thereof, or a solvate of such a salt, may be administered in association with other agents that act as or deliver a Factor IIa agonist for example 3DP-4815, AZD-0837, melagatran, ximelagatran, ART-123, lepirudin, AVE-5026, bivaluridin, dabigatran etexilate, E-4444, odiparcil, ardeparin sodium, pegmusirudin, LB-30870, dermatan sulfate, argatroban, MCC-977, desirudin, deligoparin sodium, PGX-100, idraparinux sodium, SR-123781, SSR-182289A, SCH-530348, TRIB50, TGN-167, TGN-255, and compounds described in WO94/29336, WO97/23499 and WO02/44145, which are incorporated hereby by reference.
In another aspect of the invention, the compound of formula (I), or a pharmaceutically acceptable salt or solvate thereof, or a solvate of such a salt, may be administered in association with a fibrinogen receptor antagonists for example roxifiban acetate, fradafiban, orbofiban, lotrafiban hydrochloride, tirofiban, xemilofiban, monoclonal antibody 7E3 and sibrafiban, or pharmaceutically acceptable derivative thereof.
In another aspect of the invention, the compound of formula (I), or a pharmaceutically acceptable salt or solvate thereof, or a solvate of such a salt, may be administered in association with a platelet inhibitors for example cilostezol, clopidogrel bisulfate, epoprostenol, epoprostenol sodium, ticlopidine hydrochloride, aspirin, ibuprofen, naproxen, sulindae, indomethacin, mefenamate, droxicam, diclofenac, sulfinpyrazone and piroxicam, dipyridamole, or pharmaceutically acceptable derivative thereof.
In another aspect of the invention, the compound of formula (I), or a pharmaceutically acceptable salt or solvate thereof, or a solvate of such a salt, may be administered in association with a platelet aggregation inhibitors for example acadesine, beraprost, beraprost sodium, ciprostene calcium, itezigrel, lifarizine, lotrafiban hydrochloride, orbofiban acetate, oxagrelate, fradafiban, orbofiban, tirofiban and xemilofiban or pharmaceutically acceptable derivative thereof.
In another aspect of the invention, the compound of formula (I), or a pharmaceutically acceptable derivative thereof, may be administered in association with a hemorrheologic agents for example pentoxifylline or pharmaceutically acceptable derivative thereof.
In another aspect of the invention, the compound of formula (I), or a pharmaceutically acceptable derivative thereof, may be administered in association with lipoprotein associated coagulation inhibitors; or pharmaceutically acceptable derivative thereof.
In another aspect of the invention, the compound of formula (I), or a pharmaceutically acceptable salt or solvate thereof, or a solvate of such a salt, may be administered in association with a Factor VIIa inhibitor or pharmaceutically acceptable derivative thereof. Cyclooxygenase inhibitors (i.e. COX-1 and/or COX-2 inhibitors) such as aspirin, indomethacin, ibuprofen, piroxicam, Naproxen®, Celebrex® and NSAIDs; diuretics such as chlorothiazide, hydrochlorothiazide, flumethiazide, hydroflumethiazide, bendroflumethiazide, methylchlorothiazide, trichloromethiazide, polythiazide, benzthiazide, ethacrynic acid tricrynafen, chlorthalidone, furosemide, musolimine, bumetanide, triamtrenene, amiloride, and spironolactone; anti-hypertensive agents such as alpha adrenergic blockers, beta adrenergic blockers, calcium channel blockers, diuretics, renin inhibitors, ACE inhibitors, (e.g. captopril, zofenopril, fosinopril, enalapril, ceranopril, cilazopril, delapril, pentopril, quinapril, ramipril, lisinopril), A II antagonists (e.g. losartan, irbesartan, valsartan), ET antagonists (e.g. sitaxsentan, atrsentan and compounds disclosed in U.S. Pat. Nos. 5,612,359 and 6,043,265), Dual ET/AII antagonist (e.g. compounds disclosed in WO 00/01389), neutral endopeptidase (NEP) inhibitors, vasopepsidase inhibitors (dual NEP-ACE inhibitors) (e.g. omapatrilat and gemopatrilat), nitrates and combinations of such antihypertensive agents; HMG-CoA reductase inhibitors such as pravastatin, lovastatin, atorvastatin, simvastatin, NK-104 (a.k.a. itavastatin, or nisvastatin or nisbastatin) and ZD-4522 (a.k.a. rosuvastatin, or atavastatin or visastatin); other cholesterol/lipid lowering agents such as LDL lowering agents such as torcetrapid (Pfizer), exetimibe, a combination of atorvastatin and torcetrapid, a combination of simvastatin and ezetimibe, squalene synthetase inhibitors, fibrates, and bile acid sequestrants (e.g. questran).
In another aspect of the invention, the compound of formula (I), or a pharmaceutically acceptable salt or solvate thereof, or a solvate of such a salt, may be administered in association with an anti-obesity compound, or a pharmaceutically acceptable derivative thereof, for example a pancreatic lipase inhibitor e.g. orlistat (EP 129,748), ATL-962, GT-389255 or an appetite (satiety) controlling substance for example sibutramine (Meridia®, Reductil®, GB 2,184,122 and U.S. Pat. No. 4,929,629), PYY 3-36 (amylin), APD-356, 1426, Axokine, T-71, a cannabinoid 1 (CB1) antagonist or inverse agonist, or pharmaceutically acceptable salts, solvates, solvates of such salts or prodrugs thereof, for example rimonabant (EP 656354), AVE-1625, CP945598, SR-147778, SLV-319, and as described in WO01/70700, or a Fatty Acid Synthesis (FAS) inhibitor, or pharmaceutically acceptable salts, solvates, solvates of such salts or prodrugs thereof or a melanin concentrating hormone (MCH) antagonist, or pharmaceutically acceptable salts, solvates, solvates of such salts or prodrugs thereof, for example 856464 and as described in WO 04/004726, anti-diabetic agents such as biguanides (e.g. metformin), glucosidase inhibitors (e.g. acarbose), insulines, meglitinides (e.g. repaglinide), sulfonylureas (e.g. glimepridie, glyburide and glipizide), biguanide/glyburide combinations (i.e. glucovance), thiozolidinediones (e.g. troglitazone, rosiglitazone and pioflitazone), PPAR-gamma agonists, aP2 inhibitors, and DP4 inhibitors; thyroid mimetics (including thyroid receptor antagonists) (e.g. thyrotropin, polythyroid, KB-130015, and dronedarone).
Compounds in the invention can also be administered as the sole active ingredient or in combination with a pacemaker or defribillator device.
In another aspect of the invention, the compound of formula (I), or a pharmaceutically acceptable salt or solvate thereof, or a solvate of such a salt, may be administered in association with an anti-coagulants selected from argatroban, bivalirudin, dalteparin sodium, desirudin, dicumarol, lyapolate sodium, nafamostat mesylate, phenprocoumon, tinzaparin sodium and warfarin sodium or pharmaceutically acceptable derivative thereof.
According to a further aspect of the invention, there is provided a combination product comprising:
Such combination products provide for the administration of compounds of the invention in conjunction with the other therapeutic agent, and may thus be presented either as separate formulations, wherein at least one of those formulations comprises a compound of the invention and at least one comprises the other therapeutic agent, or may be presented (i.e. formulated) as a combined preparation (i.e. presented as a single formulation including a compound of the invention and the other therapeutic agent).
Thus, there is further provided:
(1) a pharmaceutical formulation including a compound of the invention, as hereinbefore defined, or a pharmaceutically acceptable derivative thereof, an anticoagulant, and a pharmaceutically-acceptable adjuvant, diluent or carrier; and
(2) a kit of parts comprising components:
When used herein, the term “an anticoagulant” includes references to one a substance selected from the group consisting of aspirin, warfarin, enoxaparin, heparin, low molecular weight heparin, cilostazol, clopidogrel, ticlopidine, tirofiban, abciximab, dipyridamole, plasma protein fraction, human albumin, low molecular weight dextran, hetastarch, reteplase, alteplase, streptokinase, urokinase, dalteparin, filgrastin, immunoglogulin, ginkolide B, hirudins, foropafant, rocepafant, bivalirudin, dermatan sulfate mediolanum, eptilibatide, tirofiban, thrombomodulin, abcxmab, low molecular weight dermatan sulfate-opocrin, eptacog alfa, argatroban, fondaparinux sodium, tifacogin, lepirudin, desirudin, OP2000, roxifiban, parnaparin sodium, human hemoglobin (Hemosol), bovine hemoglobin (Biopure), human hemoglobin (Northfield), antithrombin III, RSR 13, heparin-oral (Emisphere) transgenic antithrombin III, H37695, enoxaparin sodium, mesoglycan, CTC 111, bivalirudin, and any derivatives and/or combinations thereof.
Particular anticoagulants that may be mentioned include aspirin and warfarin.
The term “an anticoagulant” also includes references to thrombin inhibitors. Thrombin inhibitors that may be mentioned include low molecular weight thrombin inhibitors. The term “low molecular weight thrombin inhibitors” will be understood by those skilled in the art, and includes references to any composition of matter (e.g. chemical compound) that inhibits thrombin to an experimentally determinable degree (as determined by in vivo and/or in vitro tests), and which possesses a molecular weight of below about 2,000, preferably below about 1,000.
Preferred low molecular weight thrombin inhibitors include low molecular weight peptide-based, amino acid-based, and/or peptide analogue-based, thrombin inhibitors, as well as derivatives thereof.
The term “low molecular weight peptide-based, amino acid-based, and/or peptide analogue-based, thrombin inhibitors” will be well understood by one skilled in the art to include references to low molecular weight thrombin inhibitors with one to four peptide linkages, and includes those described in the review paper by Claesson in Blood Coagul. Fibrin. 5, 411 (1994), as well as those disclosed in
U.S. Pat. No. 4,346,078, International Patent Applications WO 93/11152, WO 93/18060, WO 93/05069, WO 94/20467, WO 94/29336, WO 95/35309, WO 95/23609, WO 96/03374, WO 96/06832, WO 96/06849, WO 96/25426, WO 96/32110, WO 97/01338, WO 97/02284, WO 97/15190, WO 97/30708, WO 97/40024, WO 97/46577, WO 98/06740, WO 97/49404, WO 97/11693, WO 97/24135, WO 97/47299, WO 98/01422, WO 98/57932, WO 99/29664, WO 98/06741, WO 99/37668, WO 99/37611, WO 98/37075, WO 99/00371, WO 99/28297, WO 99/29670, WO 99/40072, WO 99/54313, WO 96/31504, WO 00/01704 and WO 00/08014; and European Patent Applications 648 780, 468 231, 559 046, 641779, 185 390, 526 877, 542 525, 195 212, 362 002, 364 344, 530 167, 293 881, 686 642, 669 317, 601 459 and 623 596, the disclosures in all of which documents are hereby incorporated by reference.
In the present application, derivatives of thrombin inhibitors include chemical modifications, such as esters, prodrugs and metabolites, whether active or inactive, and pharmaceutically acceptable salts and solvates, such as hydrates, of any of these, and solvates of any such salt.
Preferred low molecular weight peptide-based thrombin inhibitors include those known collectively as the “gatrans”. Particular gatrans which may be mentioned include HOOC—CH2—(R)Cha-Pic-Nag-H (known as inogatran) and HOOC—CH2—(R)Cgl-Aze-Pab-H (known as melagatran) (see International Patent Application WO 93/11152 and WO 94/29336, respectively, and the lists of abbreviations contained therein).
International Patent Application WO 97/23499 discloses a number of compounds which have been found to be useful as prodrugs of thrombin inhibitors. Said prodrugs have the general formula
RaOOC—CH2—(R)Cgl-Aze-Pab-Rb
wherein Ra represents H, benzyl or C1-10 alkyl, Rb (which replaces one of the hydrogen atoms in the amidino unit of Pab-H) represents OH, OC(O)Rc or C(O)ORd, Rc represents C1-17 alkyl, phenyl or 2-naphthyl and Rd represents C1-12 alkyl, phenyl, C1-3 alkylphenyl, or 2-naphthyl. Preferred compounds include RaOOC—CH2—(R)Cgl-Aze-Pab-OH, wherein Ra represents benzyl or C1-10 alkyl, e.g. ethyl or isopropyl, especially EtOOC—CH2—(R)Cgl-Aze-Pab-OH. The active thrombin inhibitors themselves are disclosed in WO 94/29336.
Further low molecular weight thrombin inhibitors that may be mentioned include those disclosed in WO 02/44145, such as compounds of the following general formula,
wherein
Rc represents —OH or —CH2OH;
R1 represents at least one optional halo substituent;
R2 represents one or two C1-3 alkoxy substituents, the alkyl parts of which substituents are themselves substituted with one or more fluoro substituents (i.e. R2 represents one or two fluoroalkoxy(C1-3) groups);
Y represents —CH2— or —(CH2)2—; and
R3 represents a structural fragment of formula I(i) or I(ii):
wherein
R4 represents H or one or more fluoro substituents;
R5 represents H, OR6 or C(O)OR7;
R6 represents H, C1-10 alkyl, C1-3 alkylaryl or C1-3 alkyloxyaryl (the alkyl parts of which latter two groups are optionally interrupted by one or more oxygen atoms, and the aryl parts of which latter two groups are optionally substituted by one or more substituents selected from halo, phenyl, methyl or methoxy, which latter three groups are also optionally substituted by one or more halo substituents);
R7 represents C1-10 alkyl (which latter group is optionally interrupted by one or more oxygen atoms), or C1-3 alkylaryl or C1-3 alkyloxyaryl (the alkyl parts of which latter two groups are optionally interrupted by one or more oxygen atoms, and the aryl parts of which latter two groups are optionally substituted by one or more substituents selected from halo, phenyl, methyl or methoxy, which latter three groups are also optionally substituted by one or more halo substituents); and
one or two of X1, X2, X3 and X4 represent —N— and the others represent —CH—;
or a pharmaceutically-acceptable derivative thereof.
Compounds of the above general formula in which R5 is other than H have been found to be useful as prodrugs of thrombin inhibitors (which thrombin inhibitors include the corresponding compounds of the above general formula in which R5 is H).
Particular compounds disclosed in WO 02/44145 that may be mentioned include those of the following general formula:
wherein
R2 represents —OCHF2, —OCF3, —OCH2CH2F or —OCH2CHF2;
R5 represents H or OR6; and
R6 represents methyl, ethyl, n-propyl, i-propyl or cyclobutyl.
In this respect, more particular compounds disclosed in WO 02/44145 that may be mentioned include the thrombin inhibitor
The compounds of the invention have the advantage that they are effective against cardiac arrhythmias.
Compounds of the invention have advantageous properties compared to compounds of the prior art, in particular enhanced potency, enhanced selectivity, and/or reduction of total clearance. These advantages may provide for corresponding useful properties in practice. For example, when used as pharmaceutical agents, compounds of the present invention may have a lower daily clinical dose, longer duration of action, and/or an improved side effect profile.
Compounds of the invention may also have the advantage that they may be more efficacious than, be less toxic than, have a broader range of activity than, be more potent than, be longer acting than, produce fewer side effects (including a lower incidence of proarrhythmias such as torsades de pointes) than, be more easily absorbed than, or that they may have other useful pharmacological properties over, compounds known in the prior art.
Biological Tests
Test A
Rb+ Efflux Assay
This assay identifies compounds that block the human Kv1.5 channel potassium channel heterologously expressed in Chinese Hamster Ovary (CHO) cells by means of Rb+ ion efflux using Flame Atomic Absorption Spectroscopy. For experimental studies, CHO cells stably transfected with cDNA for human Kv1.5 were grown as confluent layers in Falcon, 384-well tissue culture-treated black-walled clear-bottomed plates and the plates were incubated overnight at 37° C. in a cell culture incubator.
After incubating overnight the cell plates were washed and a buffer containing Rb+ ions were added to the cell plates. The plates were then incubated for another 3-4 hours in a CO2-incubator (37° C.). Following this incubation period plates were washed, compounds were added and subsequently a buffer containing elevated K+ concentrations were added in order to activate the Kv1.5 channel. Following a short incubation time, aliquots of the supernatants were transferred to supernatant plates for subsequent determination of the Rb+ content using Atomic Absorption Spectrometry (ICR8000 instrument, Aurora Biomed Inc.). The basal Rb+ efflux (conc. mg/L in wells receiving only wash buffer) was defined as 100% inhibition and the stimulated Rb+ efflux (conc. mg/L in wells receiving only buffer containing elevated concencentrations of K+ ions) was defined as 0% inhibition.
Test B
Electrophysiological recordings of potassium currents in cells stably expressing the human Kv1.5 potassium channel confirms activity and provides a functional measure of the potency of compounds that specifically affect Kv1.5 channels. Electrophysiological studies were performed using the high throughput planar patch clamp assay (Schroeder et al, J Biomol. Screen (2003)8(1); 50-64; Willumsen, Am Biotech Lab (2006)24(4); 20-21) or the standard whole cell configuration of the patch clamp technique (Hamill et al, Pflugers Archiv (1981) 391:85). CHO cells, stably transfected with cDNA for human Kv1.5, were then exposed to the drugs and Kv1.5 channels were activated 4 1.7 N-benzyl-2-(1-methyl-1-phenylethyl)-3-oxoisoindoline-1-carboxamide by a test protocol adapted from Pelsson et al (Cardiavasc Pharmacol (2005)46:7-17). Data analysis was performed off-line, paired comparisions between pre-drug and post-drug were used to determine the inhibitory effect of each compound.
The title compounds of the above Examples were tested in Test A and Test B. Most of the compounds of the invention have an activity when tested in Test A, and most of them were found to exhibit an IC50 of <30 μM, preferably an IC50 of <10 μM, or an inhibition of >20% at a concentration of 30 μM, or
The invention is illustrated by way of the following examples.
The naming of compounds in this patent application was made using a program from ACD Labs (version 9.0, Name Batch or labs).
Abbreviations
AIBN 2,2′-Azobis(2-methylpropionitril)
C Celsius
BOC-anhydride di-tert-Butyl dicarbonate
Dess-Martin Reagent 1,1,1-Triacetoxy-1,1-dihydro-1,2-benziodoxol-3(1H)-one
DCM dichloromethane
DMF N,N′-dimethylformamide
DME dimethoxyethane
DMAP Dimethylaminopyridine
DMSO dimethylsulfoxide
ES electrospray
ESI electrospray ionisation
EtOAc ethyl acetate
EtOH ethanol
DME Dimetoxyethane
HPLC high performance liquid chromatography
HRMS high resolution mass spectrometry
LAH Lithium aluminiumhydride
MeCN acetonitrile
MeOH methanol
MTBE Methyl tert-butyl ether
K2CO3 Potassium carbonate
MS mass spectroscopy
NMR nuclear magnetic resonanc
TEA triethylamine
TFA trifluoroacetic acid
THF tetrahydrofuran
UV ultra violet
atm atmosphere
rt room temperature
h hour(s)
mins minutes
br broad
br s broad singlet
s singlet
d doublet
t triplet
q quartet
m multiplet
sep septett
dd double doublet
dm double multiplet
td triple doublet
General Experimental Procedures
Flash column chromatography was performed using normal phase silica gel 60 (0.040-0.063 mm, Merck) or SP1™ Purification System from Biotage™ using silica FLASH+™ Cartridges unless otherwise stated.
1H NMR and 13C NMR measurements were performed on a BRUKER ACP 300 or on a Varian Unity Plus 400, 500 or 600 spectrometer, operating at 1H frequencies of 300, 400, 500, 600 MHz, respectively, and 13C frequencies of 75, 100, 125 and 150 MHz,
Alternatively, 13C NMR measurements were performed on a BRUKER ACE 200 spectrometer at a frequency of 50.3 MHz.
Rotamers may or may not be denoted in spectra depending upon ease of interpretation of spectra.
Chemical shifts are given in δ values (ppm) with the solvents used as internal standard, unless otherwise stated.
*The solutions are taken from a concentrated sample solved in (CH3)2SO and are diluted with (CD3)2SO. Since an substantial amount of (CH3)2SO is present in the sample, first a pre-scan is run and analysed to automatically suppress the (CH3)2SO (2.54 ppm) and H2O (3.3 ppm) peaks. This means that in this so-called wet1D experiment the intensity of peaks that reside in these areas around 3.3 ppm and 2.54 ppm is reduced. Furthermore impurities are seen in the spectrum which gives rise to a triplet at 1.12 ppm, a singlet at 2.96 and two multiplets between 2.76-2.70 ppm and 2.61-2.55 ppm. Most probably these impurities are dimethylsulfone and diethylsulfoxide.
Microwave heating was performed using single node heating in a Smith Creator or Emrys Optimizer from Personal Chemistry, Uppsala, Sweden.
Mass spectral (MS) data were obtained using ZQ, a quadrupole instrument from Waters and, where appropriate, either positive ion data or negative ion data were collected.
Accurate mass (HRMS) spectral data were obtained using TOF-MS on a LCT, Q-TOF micro or LCTP system, all from Waters.
Syringe filter from Advantec MFS Inc. with a pore size of 0.5 μm was used. Cation exchange columns from Isolute® was used.
Synthesis of Intermediates
Preparation A
Potassium tert-butoxide (52.9 g, 0.47 mol) was added to the suspension of methyl triphenylphosphonium iodide (190 g, 0.47 mol) in THF (400 ml) at ice-cooled condition. After 1 h stirring at ice-cooled condition, a solution of 4-Fluoro acetophenone (30 g, 0.199 mol) in THF (100 ml) was added dropwise. Then the reaction mixture was stirred at room temperature for 2 h and quenched with sat. ammonium chloride solution. THF was removed under reduced pressure and the reaction mixture was extracted with petether, washed with water, brine and dried over anh. sodium sulphate nitrated. The sub-title compound (30 g, 100%) was obtained as pale yellow liquid by concentration of petroleum ether layer
Borane in THF (96 ml, 0.096 mol, 1M solution) was added dropwise to the solution of 1-Fluoro-4-isopropenyl-benzene from step (i) above (30 g, 0.24 mol) in THF (350 ml) at 0° C. and the reaction mixture was stirred at room temperature for 3 h. The reaction mixture was cooled to 0° C. and hydroxylamine-O-sulphonic acid (27.72 g, 0.24 mol) was added portionwise. The reaction mixture was refluxed for overnight. Then the reaction mixture was quenched with water and concentrated, acidified with 1.5 N HCl. The reaction mixture was extracted with ethylacetate, aqueous layer was neutralized with 10% sodium hydroxide solution and extracted with dichloromethane. The dichloromethane layer was washed with, water, brine and evaporated to give the title compound (8.5 g, 23%)
Preparation B
Potassium tert-butoxide (72.4 g, 0.646 mol) was added to the suspension of methyl triphenylphosphonium iodide (261 g, 0.646 mol) in THF (500 ml) at ice-cooled condition. After 1 h stirring at ice-cooled condition, a solution of 4-chloroacetophenone (50 g, 0.323 mol) in THF (100 ml) was added dropwise. Then the reaction mixture was stirred at room temperature for 1 h. The reaction mixture was diluted with pet ether and filtered, filtrate was concentrated. The sub-title compound was obtained as pale yellow liquid by column chromatographic purification of the crude product using 6% ethyl acetate in pet ether as eluent. Yield (42 g, 86%)
Borane in THF (124 ml, 1M solution) was added dropwise to the solution of 1-chloro-4-isopropenylbenzene from step (i) above (41.5 g, 0.272 mol) in THF (500 ml) at 0° C. and the reaction mixture was stirred at room temperature for 3 h. The reaction mixture was cooled to 0° C. and hydroxylamine-O-sulphonic acid (30.76 g, 0.272 mol) was added portionwise. The reaction mixture was refluxed overnight. The reaction mixture was quenched with water and extracted with ethyl acetate. The ethyl acetate layer was washed with water, brine, dried over anh. sodium sulphate and concentrated. The concentrated mass was dissolved in dry diethyl ether (20 ml) and stirred with saturated HCl in diethyl ether for ½ h. The solid salt was isolated by filtration, neutralized with sodium bicarbonate solution and free amine was extracted with diethyl ether. The diethyl ether layer was washed with brine, dried over anh. sodium sulphate and concentrated to give the title compound (18 g, 39%)
Preparation C
N-(Tert-butoxycarbonyl)-2-Bromobensylamine (1.74 mmol, 0.5 g) and, Tetrakis(Triphenylphosfin)palladium (0.087 mmol, 0.101 g) and 4-fluorobenzeneboronic acid (2.096 mmol, 0.293 g) were dissolved in (DME, 10 ml) in a vial suitable for use in a microwave oven. Cesiumcarbonate (3.49 mmol, 1.14 g) was dissolved in 2 ml water and then added to the mixture. Ar (g) was bubbled through the mixture for 5 minutes. The reaction was performed in a micro oven (10 min, 130 deg). The crude (0.5 g, 1.65 mmol) of the sub-title compound was taken to the next step without further purification
Tert-butyl N-[[2-(4-fluorophenyl)phenyl]methyl]carbamate (1.6591 mmol, 0.5 g) from step (i) above was dissolved in HCl saturated EtOAc and stirred at rt for 2 h. The solvent was removed by evaporation and the HCl-salt was purified by flashcromatography (started with isocratic heptane/DCM 50/50 and then the DCM concentration was increased to 100% then the product was eluted with 10% MeOH (saturated with NH3), (silica gel 60 0.004-0.063 mm). The product containing fractions was pooled and the solvent was removed by evaporation, to give 320 mg (1.59 mmol) of the title compound.
Preparation D
The following amines was made according to Preparation C above:
To a solution of 2-cyclopentyl phenol (10 g, 0.09 mol) in dry DCM (150 ml) was added pyridine (8 ml, 0.14 mol) and cooled to 0° C. followed by the addition of trifluoroacteic acid anhydride (15.6 ml, 0.14 mol) drop wise. The reaction mixture was stirred at room temperature overnight. The reaction mixture was quenched with water and extracted with DCM (200 ml). The organic layer was washed with water (2×50 ml) and brine solution (1×50 ml) and concentrated to afford step 1 product (18 g, 99.4%) as brown liquid. The crude product was taken as such taken for next step.
To a solution of 2-cyclopentylphenyl trifluoroacetate (18 g, 0.06 mol) in dry DMF (150 ml) was added Zn(CN)2 (7.2 g; 0.06 mol) followed by Pd(PPh3)4(5.6 g; 0.005 mol) and refluxed at 130° C. overnight under nitrogen atmosphere. Reaction mixture was then cooled to room temperature, quenched with water (200 ml) and diluted with EtOAc (200 ml) and filtered. The filtrate was washed well with water (3×50 ml) and brine solution (1×50 ml). The organic layer was concentrated and the crude purified through silica gel column chromatography using 5% EtOAc in pet. ether to afford step 2 product (10.4 g, 99.3%) as pale yellow solid.
To suspension of lithium aluminium hydride (5.7 g, 0.15 mol) in dry THF (50 ml) at 0° C. was added 2-cyclopentylbenzonitrile (10.4 g, 0.06 mol) dissolved in dry THF (100 ml) drop wise. Reaction was stirred at room temperature overnight. Reaction mass cooled to 0° C. and quenched with 6 M KOH and diluted with THF. It was then filtered through celite and filtrate concentrated. To a solution of crude product in diethyl ether (100 ml) was added saturated. HCl in diethyl ether (50 ml) and stirred for 10 minutes. It was then filtered and precipitate was washed with petroleum ether to afford the title compound (10.3 g, 98.1%) as white solid.
Preparation F
To a solution of 2-cyclohexyl bromobenzene (12 g, 0.05 mol) in Dry DMF (100 ml) was added Zn(CN)2 (5.9 g, 0.05 mol) followed by Pd(PPh3)4 (5.8 g, 0.005 mol) and refluxed at 130° C. for overnight. Reaction mass was then cooled to room temperature, quenched with water (200 ml) and diluted with EtOAc (200 ml) and filtered. The filtrate was washed well with water (3×50 ml) and brine solution (1×50 ml). Organic layer was concentrated to afford step 1 product (10 g) as yellow gummy liquid. The crude product was used in the next step.
To a suspension of lithium aluminium hydride (5.1 g, 0.13 mol) in dry THF (60 ml) at 0° C. was added 2-cyclohexylbenzonitrile from step (i) above (10 g, 0.054 mol) dissolved in Dry THF (140 ml) drop wise. After stirring the reaction mixture for overnight at RT, it was cooled to 0° C. and quenched with 6 M KOH. It was further diluted with THF and filtered through celite. The filtrate was concentrated under vacuum. To a solution of crude product in Diethyl ether (100 ml) was added satd. HCl in diethyl ether (20 ml) and stirred for 10 minutes. It was then filtered and precipitate was washed with petroleum ether to afford the title compound (8 g, 78.4%) as white solid.
Preparation G
To the solution of 4-aminobutanol (20 g, 0.224 mol) in dichloromethane (200 ml) was added triethylamine at 0° C. tert-butyldimethylchlorosilane (33.8 g, 0.224 mol) was added at the same temperature and stirred at room temperature for 4 h. The reaction mixture was diluted with water. The organic layer was washed with water, brine, dried over anh. sodium sulfate and concentrated. The crude product (42 g, 92%) was used for next step without purification.
To a solution of (4-{[tert-butyl(dimethyl)silyl]oxy}butyl)amine (42 g, 0.20 mol) in dichloromethane (400 ml) and triethylamine (58 ml, 0.413 mol) was added BOC-anhydride (54.12 g, 0.248 mol) at 0° C. under nitrogen atmosphere. The reaction mixture was stirred at room temperature for 1 h. The reaction mixture was diluted with ice-cold water. The organic layer was washed with water and brine. The organic layer was then dried over anh. sodium sulfate and concentrated. The residue was purified by silica gel chromatography using (EtOAc/pet ether) to give (60 g, 95%) of the sub-title compound as a colorless oil.
To a solution of tert-butyl (4-{[tert-butyl(dimethyl)silyl]oxy}butyl)carbamate (from step (ii) above (60 g, 95%) in dry acetonitrile (600 ml) was added DMAP (36.23 g, 0.29 mol). BOC-anhydride (64.7 g, 0.29 mol) was added and the reaction mixture was stirred at room temperature for 24 h. Then DMAP (36.23 g, 0.29 mol) and BOC-anhydride (64.7 g, 0.29 mol) were added once more. The reaction mixture was stirred at room temperature for another 4 days. The reaction mixture was concentrated and the residue was purified by silica gel chromatography using (EtOAc/pet ether) to give (62 g, 77%) of the sub-title compound as a colorless oil.
To a solution of di-tert-butyl (4-{[tert-butyl(dimethyl)silyl]oxy}butyl)imidodicarbonate (60 g, 0.148) from step (iii) above in THF (600 ml) was added tetrabutylammonium fluoride (150 ml, 1M solution THF) at 0° C. under nitrogen atmosphere. The reaction mixture was stirred at room temperature for overnight. The reaction mixture was concentrated and concentrated mass was dissolved in ethyl acetate. The ethyl acetate layer was washed successively with water, 10% citric acid, 10% sodium bicarbonate and brine solution. The reaction mixture was concentrated and the residue was purified by silica gel chromatography using (EtOAc/pet ether) to give (37 g, 86%) of the sub-title compound as a pale yellow liquid.
To a solution of di-tert-butyl (3-hydroxypropyl)imidodicarbonate (35 g, 0.121 mol) from step (iv) above in dry THF (400 ml) was added triethylamine (84.9 mol, 0.60 ml) and (diethylamino) sulfur trifluoride (102 g, 0.60 mol) at −40° C. under nitrogen atmosphere. The reaction mixture was slowly allowed to warm up to room temperature and stirred at room temperature for 3 days. The reaction was quenched by addition of methanol at 0° C. The reaction mixture was concentrated and residue was purified by silica gel chromatography using (EtOAc/pet ether) to give (11.8 g, 33%) of the sub-title compound as a pale yellow liquid.
To a solution of di-tert-butyl (3-fluoropropyl)imidodicarbonate (11.8 g, 0.040 mol) from step (v) above in dry diethylether (30 ml) was added saturated. HCl in ether (200 ml) at 0° C. The reaction mixture was stirred at room temperature for 24 h. The reaction mixture was concentrated and the title compound (4.1 g, 80%) was obtained as pale yellow solid by recrystallization of with acetone/diethylether.
Preparation H
To a solution of Dess-Martin reagent (66 g, 0.155 mol) in dichloromethane (300 ml) was added di-tert-butyl (3-hydroxypropyl)imidodicarbonate (30 g, 0.103 mol) in dichloromethane at −78° C. under nitrogen atmosphere. Then the reaction mixture was allowed to warm up to room temperature and stirred at the same temperature for overnight. The reaction mixture was filtered through celite and the filtrate was concentrated. The concentrated mass was stirred with diethyl ether and ether layer was separated and concentrated. The concentrated crude was purified by column chromatography using (EtOAc/pet.ether) to give (23 g, 77%) of the desired intermediate as pale yellow liquid
To a solution of step (i) intermediate (23 g, 0.080 mol) in dry dichloromethane (200 ml) was added (diethylamino) sulfur trifluoride (38.7 g, 0.24 mol) at −40° C. under nitrogen atmosphere. The reaction mixture was slowly allowed to warm up to room temperature and stirred at room temperature for 2 h. The reaction mixture was slowly poured into cold water. The organic layer separated was washed with water, brine and concentrated. The residue was purified by silica gel chromatography using (EtOAc/pet ether) to give (11.12 g, 450%) of the sub-title compound as a pale yellow liquid.
To a solution of step (ii) intermediate (11.2 g, 0.035 mol) in dry diethylether (30 ml) was added satd. HCl in ether (150 ml) at 0° C. The reaction mixture was stirred at room temperature for 24 h. The reaction mixture was concentrated and the title compound (4.5 g, 86%) was obtained as pale yellow solid by recrystallization of the crude mass with acetone/diethylether.
Preparation I
(4,4-difluorobutyl)amine (Prep. H above) (6 g, 0.041 mol) and triethyl amine (14.46 ml, 0.103 mol) was refluxed in ethylformate (150 ml) overnight. The reaction mixture was cooled to room temperature and filtered. The filtrate was concentrated and the crude product was purified by column chromatography using (EtOAc/pet ether) to give the title compound (4.2 g, 74%) as pale yellow liquid.
Preparation J
A solution of diethyldiazodicarboxylate (31.1 ml, 0.195 mol) in toluene (150 ml) was added slowly to the solution of 4,4,4-trifluorobutanol (25 g, 0.195 ml), triphenylphosphine (51 g, 0.195 mol) and di-tert-butyliminodicarboxylate (38 g, 0.175 mol) in toluene (300 ml) at room temperature. The reaction mixture was stirred at the same temperature for 24 h. Trifluoroacetic acid (30 ml) was added to the reaction mixture at ice-cold condition and then stirred at room temperature for another 24 h. The reaction mixture was diluted with water (500 ml). The aqueous layer separated was washed with diethyl ether and then made alkaline with 5N sodium hydroxide solution. The alkaline solution was extracted with diethyl ether. The diethyl ether layer was dried over anhydride magnesium sulphate. Then saturated hydrochloric acid in ether was added the above ether solution and stirred for overnight. The ether was removed under reduced pressure and the resulting mass was azeotroped with toluene to give the title compound (11.8 g, 37%).
A mixture of (4,4,4-trifluorobutyl)amine (8.7 g) from step (i) above and triethyl amine (14.6 ml, 0.14 mol) was refluxed in ethylformate (250 ml) for 24 h. The reaction mixture was cooled to room temperature and filtered. The filtrate was concentrated and the crude product was purified by column chromatography using 50% ethyl acetate in pet ether as eluent to give the title compound (5.5 g, 67%, 3.84 g as a colorless liquid.
Preparation K
4-fluorobutyl)amine hydrochloride (Prep. G above) (4.12 g, 0.032 mol) and triethyl amine (14.6 ml, 0.14 mol) was refluxed in ethylformate (13.6 ml, 0.097 mol) for 24 h. Then the reaction mixture was cooled to room temperature and filtered. The filtrate was concentrated and the crude product was purified by column chromatography using 50% ethyl acetate in pet ether as eluent to give the title (3.12 g, 80%) as pale yellow liquid.
Preparation L
A vial suitable for use in a microwave oven was charged with a solution of (5-methyl-isoxazol-3-yl)-methylamine (1 g, 8.9 mmol) and ethyl formate (17 ml, 212 mmol). The mixture was heated under a nitrogen atmosphere at 150° C. for 15 min. After irradiation the mixture was cooled to room temperature and evaporated. 1.378 g of the crude product, N-(5-methyl-isoxazol-3-ylmethyl)-formamide (99% yield) was obtained and used without further purification.
[M+1] (ES) 141.0
1H NMR (500 MHz, CDCl3) δ 8.57 (br s, 1H); 8.12 (s, 1H); 6.11 (s, 1H); 4.29 (d, 2H); 2.37 (s, 3H)
(methoxycarbonylsulfamoyl)triethylammonium hydroxide, inner salt, (4.2 g, 17.7 mmol) was added to a solution of N-(5-methyl-isoxazol-3-ylmethyl)-formamide (1.378 g; 8.8 mmol from step (i) above) in acetonitrile (15 ml). The mixture was stirred at 50° C. for 3 h under a nitrogen atmosphere and then cooled to room temperature.
The solution of 3-Isocyanomethyl-5-methyl-isoxazole was used to make compounds in the examples without further purification.
Preparation M
Benzylamine (2.07 mL, 19 mmol) was dissolved in Ethyl formate (24 mL) and the reaction was left stirring at 45° C. for 20 h. The solvent was evaporated and the product was concentrated under reduced pressure to give the title compound (2.44 g, 95.2%). 1H-NMR (500 MHz, CDCl3) δ 8.36-8.25 (s, 1H), 7.5-7.2 (m, 5H), 6.02-5.57 (s, 1H), 4.56-4.46 (d, 2H).
N-benzylformamide From step (i) above (2.44 g, 18.1 mmol) and (Methoxycarbonylsulfamoyl)triethylammonium hydroxide inner salt (Burgess reagent) (4.31 g, 18.1 mmol) was added to a flask and dry MeCN (25 mL) was added. The reaction mixture was left stirring for 3 h at 50° C. and the crude title compound was used without further purification in the next step
Preparation N
1-(3-chlorophenyl)methanamine (0.283 g, 2.0 mmol) was dissolved in Ethyl formate (8 mL) and the reaction was left stirring at 45° C. for 16 h. The solvent was evaporated and the product was concentrated under reduced pressure to give the title compound (0.350 g, 103%). 1H-NMR (500 MHz, CDCl3) δ 8.23-8.09 (m, 1H), 7.38-7.18 (m, 3H), 4.8-4.34 (s, 2H).
N-(3-chlorobenzyl)formamide (0.128 g, 0.755 mmol) and (Methoxycarbonylsulfamoyl)triethylammonium hydroxide inner salt (Burgess reagent) (0.182 g, 0.764 mmol) was added to a flask and MeCN (6 mL) was added. The reaction mixture was left stirring for 3 h at 50° C. and the crude was used without further purification in the next step
Preparation O
1-(5-methyl-2-phenyl-1,3-oxazol-4-yl)methanamine (0.512 g, 2.72 mmol) was dissolved in Ethyl formate (8 mL) and the reaction was left stirring at 45° C. for 22 h. The solvent was evaporated and the product was concentrated under reduced pressure to give the sub-title compound (0.559 g, 95%). 1H-NMR (500 MHz, CDCl3) δ 8.3-8.18 (m, 1H), 8.07-7.99 (m, 2H), 7.62-7.34 (m, 3H), 6.51-5.91 (m, 1H), 4.46-4.32 (d, 2H), 2.62-2.38 (m, 2H); MS (ESI) m/z 217 ([M+H]+).
N-[(5-methyl-2-phenyl-1,3-oxazol-4-yl)methyl]formamide from step (i) above (0.259 g, 1.20 mmol) and (Methoxycarbonylsulfamoyl)triethylammonium hydroxide inner salt (Burgess reagent) (0.288 g, 1.21 mmol) was added to a flask and MeCN (6 mL) was added. The reaction mixture was left stirring for 3 h at 50° C. and the crude was used without further purification in the next step
Preparation P
N-(4,4-difluorobutyl)formamide (from prep. I above) (0.076 g, 0.554 mmol) and (Methoxycarbonylsulfamoyl)triethylammonium hydroxide inner salt (Burgess reagent) (0.132 g, 0.554 mmol) was added to a flask and MeCN (2 mL) was added. The reaction mixture was left stirring for 3 h at 50° C. and the crude was used without further purification for making compounds in examples below.
Preparation Q
A solution of 2,2-difluoro-1,3-benzodioxole-5-carbaldehyde (8 g, 0.0429 mol) in methanol (50 ml) was added dropwise to the well-stirred solution of hydroxylamine hydrochloride (4.18 g, 0.060 mol) and sodium acetate (4.9 g, 0.060 mol) in methanol (100 ml) at room temperature. The reaction mixture was stirred at room temperature for 6 h. Then the reaction mixture was concentrated under reduced pressure and concentrated mass was diluted with water, extracted with dichloromethane. The dichloromethane layer was washed with water, brine, dried over anh. sodium sulfate and concentrated to give crude intermediate. The title compound (6.2 g, 72%) was obtained on crystallization of crude intermediate from dichloromethane/hexane solvent.
A solution of 2,2-difluoro-1,3-benzodioxole-5-carbaldehyde oxime (6.2 g, 0.030 mol) from step (i) above in THF (25 ml) was added slowly to the suspension of LAH (2.9 g, 0.077 mol) in THF (100 ml) at 0° C. under nitrogen atmosphere. Then the reaction mixture was allowed to stir at room temperature for 8 h. The reaction mixture was cooled to 0° C. and quenched with 6 (M) KOH solution (3 ml). The reaction mixture was filtered through celite and solid residue was washed several times with ethylacetate. The combine filtrate was concentrated to give the crude product. The crude product was dissolved in ether and stirred with satd. HCl in ether (20 ml) for 2 h. Then the solution was filtered and residue was dried to give the title compound (4.8 g, 83.3%) as white powder.
Preparation R
1-(2,2-difluoro-1,3-benzodioxol-5-yl)methanamine hydrochloride (2.0 g, 8.94 mmol) was added to a flask, a 2 M solution of K2CO3 (30 mL) and DCM (30 mL) was added. The reaction mixture was left stirring in r.t. 2 h. The two phases were separated and the water phase was extracted once more with DCM (20 mL). The organic phases were collected and dried with MgSO4 and the salt was filtered off. The organic phase was evaporated and the product was concentrated under reduced pressure to give the title compound (1.53 g, 91.4%).
1H-NMR (500 MHz, CDCl3) δ 7.15-6.95 (m, 3H), 4.07-3.78 (s, 2H); MS (ESI) m/z 188 ([M+H]+).
1-(2,2-difluoro-1,3-benzodioxol-5-yl)methanamine (from step (i) above (1.53 g, 8.18 mmol) was dissolved in Ethyl formate (40 mL) and the reaction was left stirring at 45° C. for 20 h. The solvent was evaporated and the product was concentrated under reduced pressure to give the title compound (1.72 g, 97.6%).
1H-NMR (500 MHz, CDCl3) δ 8.35-8.25, 7.09-6.95 (m, 3H), 6.01-5.61 (m 1H), 4.53-4.45 (d, 2H); MS (ESI) m/z 214 ([M+H]+).
N-[(2,2-difluoro-1,3-benzodioxol-5-yl)methyl]formamide from step (ii) above (0.320 g, 1.49 mmol) and (Methoxycarbonylsulfamoyl)triethylammonium hydroxide inner salt (Burgess reagent) (0.359 g, 1.51 mmol) was added to a flask and dry MeCN (8 mL) was added. The reaction mixture was left stirring for 3 h at 50° C. and the crude was used without further purification in the next step (AZ12609901).
Preparation S
To 1-(3,4-dichlorophenyl)methanamine (352 mg, 2.00 mmol) was added ethyl formate (8.0 mL, 99.4 mmol). The mixture was stirred at 45° C. over night (16 h) and then concentrated in vacuo to give 433 mg of the crude product. The crude product was used in the next step without further purification.
1H-NMR (500 MHz, CD3OD) δ 8.18 (s, 1H), 7.51-7.47 (m, 2H), 7.27-7.23 (m, 1H), 4.40 (s, 2H).
To N-(3,4-dichlorobenzyl)formamide (from step (i) above) (245 mg, 1.20 mmol) dissolved in MeCN (6 mL) was added (methoxycarbonylsulfamoyl)triethylammonium hydroxide, inner salt (Burgess reagent) (286 mg, 1.20 mmol). The mixture was stirred at 50° C. for 3 h. After cooling to rt, the mixture was transferred directly to the next reaction step without any work-up.
Preparation T
Not commercially available isonitriles were made from the corresponding amines via formamides in analogy with preparation L, M, N, O, P, Q, R above, and used to make compounds in examples below
Preparation U
To a solution of 3-fluorobenzoic acid (20 g, 0.142 mol) in dichloromethane (200 ml) was added oxalyl chlorode (14.6 ml, 0.171 mol) followed by a drop of DMF at 0° C. under nitrogen atmosphere. The reaction mixture was stirred for 2 h at room temperature. Then the reaction mixture was concentrated and added dropwise to the solution of 2-amino-2-methyl propanol (28 g, 0.314 mol) in dichloromethane (100 ml) at 0° C. under nitrogen atmosphere. The resulting solution was stirred at room temperature for another 2 h. The reaction mixture was filtered and the filtrate was concentrated. The concentrated white solid (30 g) was used for the next step without purification.
Thionyl chloride (60 g) was added dropwise to the 3-fluoro-N-(2-hydroxy-1,1-dimethylethyl)benzamide (from step (i) above) (30 g) under stirring at room temperature and stirred for another 15 minutes. The yellow solution was poured into dry diethyl ether (200 ml) and the reaction mixture was neutralized with 20% cold sodium hydroxide solution. The diethyl ether layer was washed with water, brine, dried over anh. sodium sulfate and concentrated. The residue was purified by silica gel chromatography using (EtOAc/pet ether) to give the sub-title compound (18.5 g, 67.3%) as brown liquid
To a solution of 2-(3-fluorophenyl)-4,4-dimethyl-4,5-dihydro-1,3-oxazole (18.5 g, 0.958 mol) (from step (ii) above) in diethyl ether (200 ml) was added dropwise sec-BuLi (103 ml, 1.4 M in cyclohexane) at −78° C. under nitrogen atmosphere and stirred for another 30 minute at the same temperature. Then dry DMF (20 ml) was added and the reaction mixture was allowed to stir at room temperature for another 2 h. The reaction was quenched with 6(N)HCl and concentrated. The concentrated mass was refluxed with 6(N)HCl (400 ml) for overnight. Then the reaction mixture was cooled to room temperature and stirred with diethyl ether (200 ml).The organic layer was separated and washed with water, brine and dried over anh. sodium sulfate and concentrated to give the crude cyclic product. The crude mass was purified by recrystallization (diethyl ether/pet ether) to give the title compound (8 g, 49.6%) as white solid
Preparation V
To a solution of 4-chloroorobenzoic acid (50 g, 0.319 mol) in dichloromethane (400 ml) was added oxalyl chloride (34 ml, 0.383 mol) followed by a drop of DMF at 0° C. under nitrogen atmosphere. The reaction mixture was stirred for 2 h at room temperature. Then the reaction mixture was concentrated and added dropwise to the solution of 2-amino-2-methyl propanol (62.8 g, 0.702 mol) in dichloromethane (200 ml) at 0° C. under nitrogen atmosphere. The resulting solution was stirred at room temperature for another 2 h. The reaction mixture was filtered and the filtrate was concentrated. The residue was purified by silica gel chromatography using (MeOH/CHCl3) to give the desired intermediate (68 g, 93.5%) as brown liquid
Thionyl chloride (120.8 g, 1.05 mol) was added dropwise to 4-chloro-N-(2-hydroxy-1,1-dimethylethyl)benzamide (68 g, 0.30 mol) (from step (i) above under stirring at room temperature and stirred for another 15 minutes. Then the yellow solution was poured into dry diethyl ether (500 ml) and the reaction mixture was neutralized with 20% cold sodium hydroxide solution. The diethyl ether layer was washed with water, brine, dried over anh. sodium sulfate and concentrated. The residue was purified by silica gel chromatography using (EtOAc/pet ether) to give the sub-title compound (53 g, 84.6%) as brown liquid
To a solution of 2-(4-chlorophenyl)-4,4-dimethyl-4,5-dihydro-1,3-oxazole (19 g, 0.906 mol)(from step (ii) above) in diethyl ether (400 ml) was added dropwise sec-BuLi (110 ml, 1.4 M in cyclohexane) at −78° C. under nitrogen atmosphere and the reaction mixture was allowed to warm up to 0° C. and stirred at 0° C. for another 1 h. The reaction mixture was again cooled down to −78° C. and dry DMF (10 ml) was added and warmed up to room temperature overnight. The reaction was quenched and diluted with water. The separated organic layer was washed water and brine. Then the organic layer was dried over anhydrous sodium sulfate and concentrated in vacuum to give the crude sub-title compound (20 g) as yellow liquid.
5-chloro-2-(4,4-dimethyl-4,5-dihydro-1,3-oxazol-2-yl)benzaldehyde from step (iii) above (20 g) was heated at 80° C. for overnight with HCl in water (300 ml water, 150 ml Conc. HCl). Then the reaction mixture was cooled to room temperature and stirred with diethyl ether (500 ml). The diethyl ether layer was washed with water and brine. The organic layer was dried over anh. sodium sulfates and concentrated under vacuum. The crude mass was recrystallized from ethylacetate/pet ether solvent system to give the title compound (4.9 g, 31.6%) as a light brown solid
Preparation W
5-Bromo phthalide (9 g, 0.042 mol) was refluxed with 2 (N) aqueous sodium hydroxide (100 ml) in methanol (150 ml) for overnight. The reaction mixture was concentrated under reduced pressure. Concentrated mass was diluted with water and acidified with dilute HCl. The solid precipitates was filtered and residue was washed with cold water and cold ethyl acetate and dried to give the sub-title compound (9.7 g, 100%) as white solid.
To a solution of 4-bromo-2-(hydroxymethyl)benzoic acid from step (i) above (9.7 g, 0.042 mol) in acetonitrile (300 ml) was added Dess-Martin periodinane (26.8 g, 0.0633 mol) at 0° C. under nitrogen atmosphere. The reaction mixture was stirred at room temperature for 14 h. The reaction mixture was filtered and the precipitates were washed with dichloromethane. The filtrate was concentrated. The concentrated mass was heated with 200 ml of Conc. HCl for 6 h at 70° C. The reaction mixture was diluted with large volume of water and extracted with ethyl acetate. The organic layer was washed with brine, dried over anh. sodium sulfate and concentrated. The concentrated mass was purified by recrystallization from ethyl acetate/pet ether to give the title compound (4.9 g, 51%) as white solid.
Preparation X
5-fluoro-3-hydroxy-2-benzofuran-1(3H)-one
To a solution of 4-fluorobenzoic acid (50 g, 0.357 mol) in dichloromethane (400 ml) was added oxalyl chlorode (34 ml, 0.393 mol) followed by a drop of DMF at 0° C. under nitrogen atmosphere. The reaction mixture was stirred for 2 h at room temperature. Then the reaction mixture was concentrated and added dropwise to the solution of 2-amino-2-methyl propanol (70 g, 0.785 mol) in dichloromethane (200 ml) at 0° C. under nitrogen atmosphere. The resulting solution was stirred at room temperature for another 2 h. The reaction mixture was filtered and the filtrate was concentrated. The concentrated liquid mass (75 g) was used for the next step without purification.
Thionyl chloride (144 g) was added dropwise to 4-fluoro-N-(2-hydroxy-1,1-dimethylethyl)benzamide (75 g) (from step (i) above under stirring at room temperature and stirred for another 15 minutes. Then the yellow solution was poured into dry diethyl ether (500 ml) and the reaction mixture was neutralized with 20% cold sodium hydroxide solution. The diethyl ether layer was washed with water, brine and dried over anh. sodium sulfate and concentrated. The residue was purified by silica gel chromatography using (EtOAc/pet ether) to give the sub-title compound (65 g, 95%) as brown liquid.
To 2-(4-fluorophenyl)-4,4-dimethyl-4,5-dihydro-1,3-oxazole (40 g, 0.206 mol)(from step (ii) above in diethyl ether (800 ml) was added dropwise sec-BuLi (192 ml, 1.4 M in cyclohexane) at −78° C. under nitrogen atmosphere and stirred for another 3 h at the same temperature. Then dry DMF (40 ml) was added and warmed up to room temperature overnight. The reaction was quenched and diluted with water. The separated organic layer was washed water and brine. Then the organic layer was dried over anhydrous sodium sulfate and concentrated in vacuum to give crude intermediate (36 g) as yellow liquid.
2-(4,4-dimethyl-4,5-dihydro-1,3-oxazol-2-yl)-5-fluorobenzaldehyde (36 g) from step (iii) above was heated at 80° C. for overnight with HCl in water (400 ml water, 200 ml Conc. HCl). The reaction mixture was cooled to room temperature and stirred with diethyl ether (500 ml). The diethyl ether layer was washed with water and brine. The organic layer was dried over anh. sodium sulfates and concentrated under vacuum. The crude mass was recrystallized from ethylacetate/pet ether solvent system to give the title compound (7 g, 26%) an off white solid.
Preparation Y
2-Carboxymethyl benzoic acid (25 g) was dissolved in absolute ethanol (250 ml) and con. Sulfuric acid (1 ml) was added. The resulting solution was refluxed in a Dean & Stark apparatus for 2 days and the solvent was replaced by absolute ethanol for 3 times. Ethanol was removed under reduced pressure and the concentrated mass was dissolved in ethyl acetate. Ethyl acetate layer was washed with saturated sodium bicarbonate solution, water, and brine, dried over anh. Sodium sulfate and concentrated to afford the sub-title compound (30 g) as yellow oil.
ethyl 2-(2-ethoxy-2-oxoethyl)benzoate (30 g, 0.127 mol) from step (i) above was mixed with N-bromosuccinamide (22.5 g, 0.127 mol) in carbon tetrachloride (300 ml). AIBN was added and refluxed for 2 days. Then the reaction mixture was washed with water, dried over anh. sodium sulfate and concentrated. The crude intermediate was purified by column purification by using 2% ethyl acetate in pet ether to give the sub-title compound (26 g, 65%) as brown liquid
[2-(4-chlorophenyl)propyl]amine (20 g, 0.118 mol) was added dropwise to the solution of step 2 intermediate (18.6 g, 0.059 mol) in acetonitrile (150 ml) at 0° C. under nitrogen atmosphere. Then the reaction mixture was stirred at room temperature for overnight. The reaction mixture was filtered, residue was washed with dichloromethane and combined filtrate was concentrated. The crude product was purified using 10% ethyl acetate in pet ether as eluent to give the sub-title compound (23 g, 100%) as white solid.
An aqueous solution of sodium hydroxide (3 g, in 50 ml water, 0.075 mol) was added to the well stirred solution of ethyl 2-[2-(4-chlorophenyl)propyl]-3-oxoisoindoline-1-carboxylate (13 g, 0.036 mol) in ethanol (100 ml) at 0° C. The reaction mixture was allowed to stirred at room temperature for 2 h. The reaction mixture was concentrated under reduced pressure and diluted with water and extracted with ethyl acetate. The aqueous layer was acidified with 2M HCl and extracted with ethyl acetate. The ethyl acetate layer was washed with brine, dried over anh. sodium sulfate and concentrated under reduced pressure to give the title compound (11.5 g, 95.8%)
Preparation Z
2-(4-chlorophenyl)ethylamine (25 g, 0.16 mol) was added dropwise to the solution of ethyl 2-(1-bromo-2-ethoxy-2-oxoethyl)benzoate (25 g, 0.0793 mol) in acetonitrile (150 ml) at 0° C. under nitrogen atmosphere. Then the reaction mixture was stirred at room temperature for overnight. The reaction mixture was filtered, residue was washed with dichloromethane and combined filtrate was concentrated. The crude product was purified using 15% ethylacetate in petether as eluent to give the title compound (22 g, 80.8%) as white solid.
Preparation AA
An aqueous solution of sodium hydroxide (3 g, in 50 ml water, 0.075 mol) was added to the well stirred solution of ethyl 2-[2-(4-chlorophenyl)ethyl]-3-oxoisoindoline-1-carboxylate (preparation Z above) (15 g, 0.043 mol) in ethanol (100 ml) at 0° C. Then the reaction mixture was allowed to stirred at room temperature for 2 h. The reaction mixture was concentrated under reduced pressure and diluted with water and extracted with ethylacetate. The aqueous layer was acidified with 2(N)HCl and extracted with ethylacetate. The ethylacetate layer was washed with brine, dried over anh. sodium sulfate and concentrated under reduced pressure to give the title compound (13 g, 94.8%).
Preparation AB
A solution of sodium nitrite (9.2 g, 0.135 mol) in water (20 ml) was added dropwise to a solution of 2-phenoxyaniline (25 g, 0.135 mol) in 40% hydrobromic acid (50 ml) at 0° C. and stirred for another 10 minutes. Then the reaction mixture was added to the boiling mixture of cuprous bromide (21.3 g, 0.149 mol) in 40% hydrobromic acid (50 ml) and after addition it was allowed to reflux for another 30 minutes. Reaction mixture was cooled, diluted with water and extracted with diethyl ether. The diethyl ether layer was washed with 5% hydrochloric acid, 10% potassium hydroxide, water, brine, dried over sodium sulfate and concentrated to give the crude intermediate. The sub.-title compound (14.8 g, 45%) was obtained by column purification of the crude intermediate using pet ether as eluent
A solution of 1-bromo-2-phenoxybenzene from step (i) above (14.8 g, 0.0594 mol), Zn(CN)2 (6.9 g, 0.0594 mol) and Pd (PPh3)4 (6.8 g, 0.00594 mol) in dimethylformamide (100 ml) was heated at 130° C. for overnight under nitrogen atmosphere. Reaction mixture was cooled to room temperature and diluted with water (200 ml). The reaction mixture was stirred with ethyl acetate (200 ml) for 15 minutes and filtered through celite. The ethyl acetate layer was separated and washed with water, brine, dried over anh. sodium sulfate and concentrated. The crude intermediate was purified by column chromatography using 4% ethyl acetate in pet ether to give the sub-title compound (10.1 g, 87.8%) as colorless liquid.
A solution of 2-phenoxybenzonitrile (from step (ii) above (10.1 g, 0.0517 mol) in THF (50 ml) was added dropwise to the well-stirred suspension of LAH (4.9 g, 0.129 mol) in THF (50 ml) at 0° C. under nitrogen atmosphere and then allowed to stir at room temperature for overnight. The reaction mixture was quenched with 6(N) KOH (5 ml) 0° C. and stirred with THF (50 ml) for another 30 minutes. The reaction mixture was filtered and the residue was washed with ethyl acetate. The filtrate was concentrated to give the crude amine. Satd. HCl in diethyl ether (20 ml) was added to the solution of crude amine in diethyl ether (20 ml) and stirred for 2 h. Then the reaction mixture was filtered and residue was dried to give the title compound (10 g, 97.08
Preparation AC
n-BuLi (71.3 ml, 1.6 M, 0.114 mol) was added dropwise to the solution of 3-bromo pyridine (15 g, 0.095 mol) in dry diethyl ether (200 ml) at −78° C. and stirred for 15 minutes. A solution of ethyl nicotinate (13 g, 0.095 mol) in dry diethyl ether (50 ml) was added dropwise to the reaction mixture at −78° C. and stirred for another 2 h at the same temperature. Then the reaction was quenched with satd. ammonium chloride and extracted with ethyl acetate. The organic layer was washed with satd. brine, dried over anh. sodium sulfate and concentrated. The crude product was purified on neutral alumina column using (methanol/dichloromethane) to give the sub-title compound (8.5 g, 49% as brown liquid.
A solution of dipyridin-3-ylmethanone from step (i) above (8.5 g, 0.046 mol) in dry methanol (50 ml) was added to the well stirred solution of sodium acetate (9.6 g, 0.117 mol) and hydroxylamine hydrochloride (8.12 g, 0.117 mol) in dry methanol (50 ml). The reaction mixture was refluxed under nitrogen atmosphere for 2 h. Then the reaction mixture was concentrated, diluted with water and extracted with dichloromethane. The organic layer was washed with water, brine and dried over anh. sodium sulphate and concentrated to give the sub-title compound (9.5 g, 100%)
dipyridin-3-ylmethanone oxime (step (ii) above (9.5 g, 0.0477 mmol) and ammonium acetate (5.5 g, 0.0716 mmol) were dissolved in ethanol (00 ml), water (80 ml) and 40% NH3 (aq) (100 ml). The mixture was heated to 80° C. and zinc dust (15.5 g, 0.23 mmol) was added over a period of 1 h. The reaction was then stirred at 80° C. for overnight and was then cooled to rt, filtered and the filtrate was concentrated in vacuum. The remaining aqueous solution was basified with 10 M NaOH (aq), extracted with dichloromethane. The combined organic phases were washed with brine (40 ml) dried over anh. Sodium sulphate and concentrated. The concentrated yellow gummy mass was dissolved in ethyl acetate and diethyl ether (50 ml) satd. with HCl gas was added drop wise and stirred for 1 h. The reaction mixture was filtered and solid residue was dried to give the title compound (9.2 g, 65%) as off white solid
Preparation AD
BOC anhydride (12 ml, 0.054 mol) was added to the ice-cold solution of 3-Bromo phenethylamine (10 g, 0.049 mol) and triethylamine (10.4 ml, 0.10 mol) in dichloromethane (100 ml). After 1 h stirring at room temperature the reaction mixture was quenched with water and extracted with dichloromethane. Organic layer was washed with water and brine, dried over anh. sodium sulphate and concentrated to give the sub-title compound (15 g, 100%)
A mixture tert-butyl tert-butyl [2-(3-bromophenyl)ethyl]carbamate (15 g, 0.05 mol), Zn(CN)2 (5.87 g, 0.05 mol) and tetrakis triphenylphosphine palladium (0)(5.7 g, 0.005 mol) was heated at 140° C. for 5 h in dry DMF (150 ml) under nitrogen atmosphere. Then the reaction mixture was cooled to room temperature, quenched with water and filtered through celite pad. The reaction mixture was extracted with ethyl acetate and the ethyl acetate layer was washed with water, brine successively and dried over anh. sodium sulphate and concentrated. Then the crude material was purified by column chromatography using 20% ethyl acetate in pet ether as eluent to give the sub-title compound desired (7 g, 57%) as white solid
Trifluoroacetic acid (5 ml) was added to a solution of tert-butyl [2-(3-cyanophenyl)ethyl]carbamate (10 g) in dichloromethane (20 ml) and stirred at room temperature for overnight. The solvent and excess trifluoroacetic acid was removed under reduced pressure to give gummy oil. On trituration of gummy oil with diethyl ether, white solid appeared. Diethyl ether was decanted and white solid was dried to get the title compound (6 g)
Preparation AE
A mixture of 2-fluoro-4-hydroxy benzonitrile (10 g, 0.0729 mol), DMAP (900 mg, 0.00729 mol), triethylamine (30 ml, 0.218 mol) and dimethylthiocarbamoyl chloride (11 g, 0.0875 mol) in dry dichloromethane (200 ml) was stirred at reflux under nitrogen atmosphere overnight. The reaction mixture was quenched with water and extracted with dichloromethane. The organic layer was washed with water, brine and dried over sodium sulfate. The solvent was evaporated under reduced pressure and the residue was triturated with pet ether. The product was filtered and dried under vacuum to give the sub-title compound (14 g, 85.8%) as yellow solid
O-(4-cyano-3-fluorophenyl)dimethylthiocarbamate from step (i) above (14 g) and diphenyl ether (200 ml) were mixed and stirred at 210° C. for 6 h. Then diphenyl ether was removed by distillation under reduced pressure and the crude mass was stirred with pet ether and filtered. The residue was washed with pet ether for several times and air dried to give the sub-title compound (13.4 g, 95.7%) as light brown solid.
S-(4-cyano-3-fluorophenyl)dimethylthiocarbamate from step (ii) above (13.4 g, 0.059 mol) was taken in THF (150 ml) and to which a solution of KOH (6.7 g, 0.11 mol) in methanol (200 L) was added. The reaction mixture was stirred at RT for 3 h and then concentrated. The crude mass was dissolved in ethylacetate. The ethylacetate layer was acidified with 3(N)HCl to pH=2. The ethylacetate layer was washed with water and brine, dried over anh. sodium sulphate and concentrated. The crude intermediate (9 g) obtained was directly taken for the next step without further
Methyl iodide (12.5 g, 0.058 mol) was added dropwise to a solution of 2-fluoro-4-mercaptobenzonitrile (9 g, 0.058 mol) (from step (iii) above and potassium carbonate (12.1 g, 0.088 mol) in dry acetonitrile (150 ml) and stirred at room temperature for 3 h under nitrogen atmosphere. The reaction mixture was filtered and the filtrate was concentrated to give the sub-title compound (9.6 g, 100%)
2-fluoro-4-(methylthio)benzonitrile (9.6 g, 0.0524 mol) from step (iv) above) was added to a mixture of glacial acetic acid/water/ethanol (140 ml, 2:2:3) and stirred for 10 min. The reaction mixture was cooled to 0° C. and oxone (40.4 g, 0.065 mol) was added in portions. The reaction mixture was stirred at RT for 2 h and diluted with dichloromethane. Filtered off inorganic and mother liquor was partitioned between water and dichloromethane. Organic layer was washed with water and brine and dried over sodium sulfate. Solvent evaporation under reduced pressure followed by recrystallization of the crude product using ethylacetate/petether afforded desired sulfone (9 g, 80%).
To a solution of 2-fluoro-4-(methylthio)benzonitrile (9 g) in methanol (150 ml), Raney nickel (2 g) was added and then saturated with ammonia (g). The reaction mixture was hydrogenated in parr shaker under 3 kg hydrogen pressure over overnight. The reaction mixture was filtered and the filtrate was concentrated. The concentrated mass was dissolved in ethyl acetate and stirred with saturated HCl in ether for overnight under nitrogen atmosphere. The solid precipitates were filtered, washed with diethyl ether and dried to give the title compound (1.3 g, 14.3%) as pale yellow solid.
Preparation AF
A mixture of 2-chloro-4-hydroxy benzonitrile (25 g, 0.162 mol), DMAP (1.9 g, 0.162 mol), triethylamine (68 ml, 0.483 mol) and dimethylthiocarbamoyl chloride (24 g, 0.195 mol) in dry dichloromethane (500 ml) was stirred at reflux under nitrogen atmosphere overnight. The reaction mixture was quenched with water and extracted with dichloromethane. Organic layer was washed with water, brine and dried over sodium sulfate. Solvent evaporated under reduced pressure and the residue was triturated with pet ether. The product was filtered and dried under vacuum to give desired intermediate (38 g, 97%) as yellow solid
O-(3-chloro-4-cyanophenyl) dimethylthiocarbamate (38 g) and diphenyl ether (500 ml) were mixed and stirred at 210° C. for 6 h. Then diphenyl ether was removed by distillation under reduced pressure and the crude mass was stirred with pet ether and filtered. The residue was washed with pet ether for several times and air dried to give desired intermediate (37.8 g, 99.5%) as light brown solid.
S-(3-chloro-4-cyanophenyl)dimethylthiocarbamate (35 g, 0.145 mol) was taken in THF (400 ml) and to which a solution of KOH (163 g, 0.30 mol) in methanol (200 L) was added. The reaction mixture was stirred at RT for 3 h and then concentrated. The crude mass was dissolved in ethylacetate. The ethylacetate layer was acidified with 3(N)HCl to PH=2. The ethylacetate layer was washed with water and brine, dried over anh. sodium sulphate and concentrated. The crude intermediate (25 g) obtained was directly taken for the next step without further purification.
Methyl iodide (31.4 g, 0.22 mol) was added dropwise to a solution of 2-chloro-4-mercaptobenzonitrile (25 g, 0.147 mol) and potassium carbonate (20.4 g, 0.22 mol) in dry acetonitrile (300 ml) and stirred at room temperature for 3 h under nitrogen atmosphere. Then the reaction mixture was filtered and the filtrate was concentrated to give the desired intermediate (26 g, 96.2%).
2-chloro-4-(methylthio)benzonitrile (26 g, 0.145 mol) was added to a mixture of glacial acetic acid/water/ethanol (900 ml, 2:2:3) and stirred for 10 min. The reaction mixture was cooled to 0° C. and oxone (217 g, 0.353 mol) was added in portions. The reaction mixture was stirred at RT for overnight and diluted with dichloromethane. Filtered off inorganic and mother liquor was partitioned between water and dichloromethane. Organic layer was washed with water and brine and dried over sodium sulfate. Solvent evaporation under reduced pressure followed by recrystallization of the crude product using ethyl acetate/petether afforded the sub-title compound (18 g, 59%) as white solid.
To a solution of step 5 intermediate (8 g) in methanol (200 ml), Raney nickel (2.5 g) was added and then saturated with ammonia (g). Then the reaction mixture was hydrogenated in parr shaker under 3 kg hydrogen pressure over overnight. The reaction mixture was filtered and the filtrate was concentrated. The concentrated mass was dissolved in ethyl acetate and stirred with saturated HCl in ether for overnight under nitrogen atmosphere. The solid precipitates were filtered, washed with diethyl ether and dried to give the title compound (7 g, 86.4%) as a solid.
Preparation AG
To a stirred solution of 2-(4-chlorophenyl)acetonitrile (10 g, 0.066 mol) in DMF, sodium hydride (3.95 g, 0.1649 mol) was added at 0° C. in portions. The reaction mixture was allowed to stir for 1 hour at room temperature. Then it was again cooled to 0° C. and methyl iodide (28.0 g, 0.198 mol) was added dropwise. The reaction mixture was allowed to stir at 40° C. for 4 hr. The reaction mixture was diluted with cold water and product was extracted with EtOAc. The organic layer was washed with water and brine. The organic layer was dried over anhydrous sodium sulfates and concentrated under vacuum. The residue was purified by silica gel chromatography using (EtOAc/pet ether) to give the sub-title compound (7.7 g, 65%) as colourless liquid
To a mixture of LiAlH4 (4.06 g, 0.107 mol) in THF was added dropwise step 1 intermediate (7.7 g, 0.043 mol) in THF at 0° C. The reaction mixture was allowed to stir at room temperature overnight. The reaction mixture was cooled to 0° C. and quenched with 10 ml of 6M KOH solution. The reaction mixture was diluted with THF and allowed to stir at room temperature for 30 min. The reaction mixture was filtered and filtrate was concentrated. The residue was diluted with diethyl ether and HCl in ether was added at 0° C. The white solid was collected by filtration, washed with dry diethyl ether and dried under vacuum to afford desired product (6 g, 77%) of the title compound
Preparation AH
To a stirred solution of 3-fluorobenzaldehyde (17.5 g, 0.141 mol) in methanol (175 ml), trimethyl orthoformate (17.5 ml, 0.159 mol) and PTSA (175 mg) were added. The reaction mixture was stirred at RT overnight. The reaction mixture was quenched with 30 ml of 1% methanol KOH solution. The reaction mass was concentrated, then diluted with water and product was extracted with ethyl acetate. The organic layer was washed with water and brine. The organic layer was dried over anh. Sodium sulfates and concentrated under vacuum. The crude was fractionally distilled to get the desired intermediate (20 g, 83.6%) as colorless liquid
To a solution of 1-(dimethoxymethyl)-3-fluorobenzene (20 g, 0.11 mol) in THF (200 ml) (from step (i) above was added drop wise sec-BuLi (220 ml, 1.4 M in cyclohexane) at −78° C. under nitrogen atmosphere and stirred for another 3 h at the same temperature. Then CO2 was purged until the red solution became yellow and slowly warmed up to room temperature. The reaction mixture was stirred for another 1 h and then quenched with 20 ml of HCl. Then the reaction mixture was concentrated. The crude reaction mass so obtained was heated at 80° C. for overnight with HCl in water (300 ml Conc. HCl, 200 ml water). Then the reaction mixture was cooled to room temperature and stirred with diethyl ether (100 ml). The diethyl ether layer was washed with water and brine. The organic layer was dried over anh. Sodium sulfates and concentrated under vacuum. The crude mass was submitted for prep HPLC to give the title compound (2.3 g, 11.7%) as a white solid
Preparation AI
Tert-butyl (2-bromobenzyl)carbamate (1.74 mmol, 0.50 g), Tetrakis(triphenylphosphine)palladium (0.087 mmol, 0.10 g) and (3,4-difluorophenyl)boronic acid (2.10 mmol, 0.33 g) were dissolved in (DME 10 ml) in a micro vial. Cesium carbonate (3.49 mmol, 1.14 g) was dissolved in 2 ml water and then added to the mixture. Ar (g) was bubbled through the mixture for 5 minutes. The crude was purified by flash chromatography (started with isocratic heptane/EtOAc 90/10 and then the EtOAc concentration was increased to 70%, (silica gel 60 0.004-0.063 mm). The product containing fractions was pooled and the solvent was removed by evaporation to give the title compound (3.00 g, 89.6%). 1H-NMR (500 MHz, CDCl3): δ 7.46-7.42 (m, 1H); 7.41-7.36 (m, 1H); 7.36-7.30 (m, 1H); 7.25-7.18 (m, 2H); 7.17-7.11 (m, 1H); 7.06-7.01 (m, 1H); 4.75 (bs, 1H); 4.31-4.17 (m, 2H); 1.45 (s, 9H).
Tert-butyl [(3′,4′-difluorobiphenyl-2-yl)methyl]carbamate (9.39 mmol, 3.00 g) was dissolved in HCl saturated EtOAc and stirred at rt for 2 h. The solvent was removed by evaporation and the HCl-salt was purified by flash chromatography (started with isocratic heptane/DCM 50/50 and then the DCM concentration was increased to 100% then the product was elated with 10% MeOH (saturated with NH3), (silica gel 60 0.004-0.063 mm). The product containing fractions was pooled and the solvent was removed by evaporation to give the title compound (2.00 g, 97.1%)
1H-NMR (500 MHz, CDCl3): δ 7.55-7.50 (m, 1H); 7.42-7.35 (m, 1H); 7.32-7.15 (m, 4H); 7.14-7.06 (m, 1H); 4.82-4.79 (m, 2H); 3.78-3.73 (m, 2H).
Preparation AJ
1-bromo-4-fluorobenzene (11.15 mmol, 1.95 g), Tetrakis(triphenylphosphine)palladium (0.41 mmol, 0.47 g) and (2-{[(tert-butoxycarbonyl)amino]methyl}-4-fluorophenyl)boronic acid (9.29 mmol, 2.50 g) were dissolved in (DME 10 ml) in a micro vial. Cesium carbonate (18.58 mmol, 6.05 g) was dissolved in 2 ml water and then added to the mixture. N2 (g) was bubbled through the mixture for 5 minutes. The reaction was performed in a micro oven (20 min, 130 deg). The crude was purified by flash chromatography (started with isocratic heptane/EtOAc 95/5 and then the EtOAc concentration was increased to 60%, (silica gel 60 0.004-0.063 mm). The product containing fractions was pooled and the solvent was removed by evaporation to give the title compound (2.54 g, 85.6%). 1H-NMR (500MHz, CDCl3): δ 7.30-7.21 (m, 2H), 7.21-7.08 (m, 4H); 7.03-6.97 (m, 1H), 4.79 (bs, 1H), 4.29-4.13 (m, 2H); 1.45 (s, 9H).
Tert-butyl [(4,4′-difluorobiphenyl-2-yl)methyl]carbamate (7.95 mmol, 2.54 g) was dissolved in HCl saturated EtOAc and stirred at rt for 2 h. The solvent was removed by evaporation and the HCl-salt of the product was purified by flash chromatography (started with isocratic heptane/EtOAc 50/50 and then the EtOAc concentration was increased to 100% then the product was eluated with 10% MeOH (saturated with NH3), (silica gel 60 0.004-0.063 mm). The product containing fractions was pooled and the solvent was removed by evaporation to give the title compound (1.64 g, 94.1%). 1H-NMR (500 MHz, CD3OD): δ 7.34-7.27 (m, 3H); 7.22-7.13 (m, 3H), 7.05-7.0 (m, 1H); 4.81 (s, 2H), 3.72 (s, 2H).
Preparation AK
The following amines were made according to preparation AI and AJ above
A solution of 2-formyl-benzoic acid (1.23 g, 8.2 mmol) in methanol (15 ml) was treated with 2-(4-chloro-phenyl)-propylamine hydrochloride (1.69 g, 8.2 mmol) and triethylamine (1.14 ml). The mixture was stirred at room temperature for 30 min. The 3-Isocyanomethyl-5-methyl-isoxazole solution from Preparation L above was added and the mixture was stirred at room temperature for 16 hr. The mixture was concentrated, dissolved in 50 ml dichloromethane and washed with 100 ml saturated NaHCO3 solution. The organic phase was separated, dried over MgSO4 and evaporated. The remaining oil was purified using preparative HPLC giving the title compound (0.903 g, 26% yield).
[M+1] (ES) 424.10
1H NMR (500 MHz, CDCl3) δ 7.46-7.61 (m, 3H); 7.35-7.44 (m, 1H); 7.07-7.27 (m, 5H); 5.81 (s, 1H); 4.78 (s, 1H); 4.46-4.56 (m, 1H); 4.31-4.39 (m, 1H); 4.12-4.27 (m, 1H); 3.15-3.40 (m, 2H); 2.35 (s, 3H); 1.23 (d, 3H)
(biphenyl-2-ylmethyl)amine (23.78 mmol, 4.36 g) was dissolved in MeOH and 2-furaldehyde (23.78 mmol, 2.29 g) and but-2-ynoic acid (23.78 mmol, 2.00 g) was added. The mixture was stirred at rt for 30 min. Tert-butyl isocyanide (23.78 mmol, 1.98 g) was added and the mixture was stirred at rt over night. The solvent was removed by evaporation. The product was taken on to the next step without further purification.
N-(biphenyl-2-ylmethyl)-N-[2-(tert-butylamino)-1-(2-furyl)-2-oxoethyl]but-2-ynamide (23.0 mmol, 9.87 g) (from step (i) above was dissolved in Xylene (200 ml), ytterbium (III) trifluoromethansulfonate (2.30 mmol, 1.43 g) was added. The mixture was refluxed for 1.5 h and then no starting material was left. The solvent was removed by evaporation. The crude was purified by flashcromatography (started with isocratic heptane/EtOAc 80/20 and then the EtOAc concentration was increased to 100% (silica gel 60 0.004-0.063 mm). The product precipitated on the column and had to be eluated with 50% MeOH. Then the product was re-crystallized from MeOH to give the title compound (4.52 g, 45.9%).
1H-NMR (500 MHz, DMSO-d6): δ 7.96 (s, 1H), 7.45-7.28 (m, 7H), 7.26-7.20 (m, 1H), 7.20-7.14 (m, 1H), 7.06-7.01 (m, 1H), 6.97-6.92 (m, 1H), 5.07 (d, 1H), 4.63 (s, 1H), 3.90 (d, 1H), 2.45 (s, 3H), 1.11 (s, 9H); HRMS calculated for (C27H28N2O3+H)+, 429.5436; found (ES [M+H]+), 429.5454.
The synthetic sequence originated in a published procedure:
D. L. Wright, C. V. Robotham and K. Aboud, Tetrahedron Lett. 2002, 43, 943-946.
The enantiomers of 2-(biphenyl-2-ylmethyl)-N-(tert-butyl)-5-hydroxy-4-methyl-3-oxoisoindoline-1-carboxamide (example 2)(0.20 g, 0.47 mmol) were separated by preparative HPLC using a Reprosil 20×250 mm chiral column using 40% isopropyl alcohol in heptane as mobile phase which gave (+)-enantiomer (0.10 g) (E1) and (−)-enantiomer (0.10 g) of the title compound. (E2)
(+)-Enantiomer:
HRMS: calculated for (C27H28N2O3+H)+ 429.2178; found (ES [M+H]+) 429.2166.
(−)-Enantiomer:
HRMS: calculated for (C27H28N2O3+H)+ 429.2178; found (ES [M+H]+) 429.2147.
2-Formyl-benzoic acid (0.30 g, 2 mmol), methyl 4-chloro-D-phenylalaninate hydrochloride (0.5 g, 2 mmol) and NEt3 (0.28 mL, 2 mmol) were dissolved in MeOH (5 mL) and stirred at ambient temperature for 30 mins. tert-Butyl-isocyanide (0.23 mL, 2 mmol) was added and the resulting mixture was stirred for 3 days at ambient temperature. The mixture was concentrated under reduced pressure and the residue was purified by preparative HPLC using a Waters HPLC system, equipped with a Kromasil C8 50.8×300 mm column using a MeCN/0.1 M NH4OAc buffer system with a gradient from 100% A (5% MeCN+95% 0.1 M NH4OAc) to 100% B (100% 0.1 M NH4OAc) as mobile phase. The product fraction was concentrated under reduced pressure and freeze-dried to give the title compound (0.22 g, 25%).
1H-NMR (500 MHz, CDCl3) δ 7.87-7.83 (m, 1H), 7.60-7.49 (m, 3H), 7.17-7.13 (m, 2H), 7.02-6.98 (m, 2H), 4.17-4.12 (m, 1H), 3.96 (s, 1H), 3.94 (s, 3H), 3.80-3.40 (m, 2H), 1.22 (s, 9H)
13C-NMR (125 MHz, CDCl3) δ 170.9, 169.5, 166.7, 142.1, 135.6, 133.4, 133.0, 130.5, 130.0, 129.4, 129.1, 123.8, 123.3, 67.4, 59.5, 53.6, 51.8, 34.0, 28.6
HRMS: calculated for (C23H25ClN2O4+H)+429.1581; found (ES [M+H]+) 429.1583
4,4,4-trifluorobutan-1-amine (0.087 g, 0.53 mmol) was mixed with dichloromethane (2 ml) under nitrogen atmosphere and Me3Al (2M in heptane) was added. The resulting mixture was stirred for 1.5 h at ambient temperature and methyl (2R)-2-{1-[(tert-butylamino)carbonyl]-3-oxo-1,3-dihydro-2H-isoindol-2-yl}-3-(4-chlorophenyl)propanoate (Example 4 above) (0.11 g, 0.26 mmol) was added. The resulting mixture was stirred at ambient temperature for 20 h. The reaction was quenched by addition of methanol and the formed salts were removed by filtration. The filtrate was purified by silica flash chromatography using a Biotage Horizon apparatus with ethyl acetate/heptane as mobile phase. The product fraction was concentrated under reduced pressure to give the title compound (0.075 g, 54%).
HRMS: calculated for (C26H29ClF3N3O3+H)+ 524.1927; found (ES [M+H]+) 524.1893.
2-[2-(4-chlorophenyl)ethyl]-3-oxoisoindoline-1-carboxylic acid (0.4 mmol) (Preparation AA) was dissolved in DCM (2 mL) and (3-dimethylamino-propyl)-ethyl-carbodiimide hydrochloride (0.4 mmol) was added as a solid. After 15 mins N-methylbutan-1-amine (0.4 mmol) was added and the reaction was then allowed to continue at 30 degrees for 2 days. The reaction mixture was purified by silica flash chromatography using a Biotage Horizone apparatus with ethyl acetate/heptane as mobile phase. The product fraction was concentrated under reduced pressure to give the title compound (0.007 g, 5%).
1H-NMR (500 MHz, CDCl3) δ 7.91-7.87 (m, 1H), 7.58-7.48 (m, 2H), 7.40-7.32 (m, 1H), 7.30-7.24 (m, 3H), 7.21-7.13 (m, 2H), 5.26-5.15 (m, 1H), 4.40-4.24 (m, 1H), 3.45-3.21 (m, 3H), 3.10-2.89 (m, 4H), 1.57-1.45 (m, 2H), 1.35-1.26 (m, 2H), 0.94 (t, 3H)
HRMS calculated for (C22H25ClN2O2+H)+ 385.1683; found (ES [M+H]+) 385.1670.
2-formylbenzoic acid (9.09 mmol, 1.36 g) was dissolved in Methanol (20 ml) and 1-biphenyl-2-ylmethanamine (9.09 mmol, 1.66 g) was added and the mixture was stirred at rt for 30 minutes. Then 4-(isocyanomethyl)benzonitrile (9.09 mmol, 1.29 g) dissolved in Acetonitrile (5 ml) was added to the mixture. The reaction was stirred at rt over night. The crude was purified by flashcromatography (started with isocratic Toluene/EtOAc 100/0 and then the EtOAc concentration was increased to 50%, (silica gel 60 0.004-0.063 mm). The product containing fractions was pooled and the solvent was removed by evaporation to give the title compound (2.32 g, 55.8%).
1H-NMR (500 MHz, CDCl3): δ 7.63-7.56 (m, 3H), 7.50-7.45 (m, 2H); 7.45-7.39 (m, 3H); 7.37-7.24 (m, 4H); 7.22-7.16 (m, 3H); 7.00 (d, 2H); 6.59-6.54 (m, 1H); 5.24 (d, 1H), 4.77 (s, 1H); 4.31 (d, 1H); 4.29-4.18 (m, 2H).
To a solution of 2-(biphenyl-2-ylmethyl)-N-(4-cyanobenzyl)-3-oxoisoindoline-1-carboxamide (Example 7) (0.43 mmol, 200 mg) in 100 mL MeOH (2M NH3) was added Raney-Ni (prewashed with EtOH (abs). The resulting mixture was hydrogenated at 1.3 bar for 16 h. The solvent was removed by evaporation. The crude was purified by flashcromatography (started with isocratic toluene/MeOH 90/10 and then the MeOH concentration was increased to 50%, (silica gel 60 0.004-0.063 mm). The product containing fractions was pooled and the solvent was removed by evaporation to give the title compound (0.172 g, 85.2%).
1H-NMR (300 MHz, CDCl3): δ 7.69 (d, 1H), 7.55-7.35 (m, 3H); 7.35-7.13 (m, 11H); 7.08 (d, 2H); 4.72 (s, 1H); 4.19 (s, 2H); 3.74 (s, 2H).
5-chloro-3-hydroxy-2-benzofuran-1(3H)-one (Preparation V)(3.25 mmol, 0.6 g) was dissolved in Methanol (10 ml) and [(1R)-1-phenylethyl]amine (3.25 mmol, 0.38 g) was added and stirred for 20 min. Then (isocyanomethyl)benzene (3.25 mmol, 0.39 g) was added to the mixture. The reaction was stirred at rt over night. The solvent was removed by evaporation. The crude was purified by flashcromatography (started with isocratic heptane/EtOAc 90/10 and then the EtOAc concentration was increased to 50%, (silicagel 60 0.004-0.063 mm). The product containing fractions was pooled and the solvent was removed by evaporation. The substance was not pure enough so it was purified by preparative HPLC (started with isocratic acetonitrile/buffer 20/80 and then the acetonitrile concentration was increased to 95%, the buffer was a mixture of acetonitrile/water 10/90 and ammonium acetate (0.1 M, column KR-100-7-C8, 50 mm×250 mm, flow 40 ml/min). The product containing fractions was pooled and the acetonitrile was removed by evaporation. The product was frees dried over night to give the title compound (mixture of diastereomeres)(0.345 g, 26.2%). 1H-NMR (500 MHz, CDCl3): δ 7.59-6.9 (m, 12H), 6.88-6.8 (m, 1H), 5.68-5.44 (m, 1H), 5.16-4.33 (t, 2H), 4.22-3.46 (m, 1H), 1.78-159 (m, 3H); HRMS calculated for (C24H21ClN2O2+H)+, 405,1368; found (ES [M+H]+), 405,1370.
2-formylbenzoic acid (0.33 mmol, 50 mg) was dissolved in Methanol (1 ml) and [2-(4-fluorophenoxy)benzyl]amine hydrochloride (0.33 mmol, 84 mg) and TEA (0.66 mmol, 64 mg) was added. Then 1-isocyanobutane (0.33 mmol, 28 mg) dissolved in acetonitrile was added to the mixture. The reaction was stirred at rt over night. The solvent was removed by evaporation. The crude was purified by flashcromatography (started with isocratic heptane/EtOAc 90/10 and then the EtOAc concentration was increased to 100%, (silica gel 60 0.004-0.063 mm). The product containing fractions was pooled and the EtOAc was removed by evaporation to give the title compound (47 mg, 32.6%).
1H-NMR (500 MHz, CDCl3): δ 7.68-7.64 (d, 1H), 7.62-7.56 (d, 1H), 7.56-7.5 (t, 1H), 7.42-7.36 (t, 1H), 7.36-7.31 (d, 1H), 7.27-7.20 (t, 1H), 7.10-6.93 (m, 5h), 6.85-6.80 (d, 1 h), 6.77-6.71 (m, 1H), 5.33-5.21 (d, 1H), 4.98 (s, 1H), 4.59-4.51 (d, 1H), 3.33-3.22 (m, 1H), 3.16-3.05 (m, 1H), 1.44-1.14 (m, 5H), 0.94-0.75, (m 3H); HRMS calculated for (C26H25FN2O3+H)+, 433.5069; found (ES [M+H]+), 433.5061
2-(biphenyl-2-ylmethyl)-N-(tert-butyl)-5-hydroxy-4-methyl-3-oxoisoindoline-1-carboxamide (Example 2)(0.252 mmol, 108 mg) was dissolved in DCM (2 ml) in a 2 ml micro vial, tetrabutylammoniumhydrogensulphate (0.262 mmol, 89 mg) and sodiumhydroxide (0.831 mmol, 33 mg) was added and the tube was sealed. N2 (g) was bubbled through the mixture for 5 min. chlorodifluoromethane (g) was bubbled through the mixture for 30 sec. The mixture was stirred at rt for 2 h. The solvent was removed by evaporation and the reaction mixture was purified by flashcromatography (started with isocratic Heptane/EtOAc 95/5 and then the EtOAc concentration was increased to 50%, (silica gel 60 0.004-0.063 mm). The product containing fractions was pooled and the solvent was removed by evaporation to give the title compound (44 mg, 36.5%).
1H-NMR (500 MHz, CDCl3): δ 7.45-7.32 (m, 7H), 7.32-7.25 (m, 4H), 6.53 (t, 1H,), 5.42 (s, 1H), 5.17 (d, 1H), 4.47 (s, 1H), 4.44 (d, 1H), 2.64 (s, 3H), 1.09 (s, 9H); HRMS calculated for (C28H28F2N2O3+H)+, 479.5515; found (ES [M+H]+), 479.5485.
4-fluoro-3-hydroxy-2-benzofuran-1(3H)-one (Preparation U)(11.89 mmol, 2.0 g) was dissolved in Methanol (10 ml) and [2-(4-chlorophenyl)propyl]amine hydrochloride (11.89 mmol, 2.452 g) and TEA (13.08 mmol, 1.324 g) was added and stirred for 20 min. Then 1-isocyanobutane (11.89 mmol, 0.98 g) was added to the mixture. The reaction was stirred at rt over night. The solvent was removed by evaporation. The crude was purified by flashcromatography (started with isocratic heptane/EtOAc 90/10 and then the EtOAc concentration was increased to 50%, (silica gel 60 0.004-0.063 mm). The product containing fractions was pooled and the solvent was removed by evaporation. When evaporating the product precipitated and the solid was filtered of and dried to give the title compound (1.05 g, 21.9%).
1H-NMR (500 MHz, CDCl3): δ 7.42-6.90 (m, 7H), 4.95-4.43 (d, 1H, 230.16 Hz), 4.28-4.14 (m, 1H,), 3.38-3.11 (m, 4H), 1.45-1.34 (m, 2H), 1.34-1.18 (m, 5H), 0.92-0.82 (m, 3H) MS calculated for (C22H24ClFN2O2+H)+, 403.90; found (ES [M+H]+), 403.12
The four stereoisomers of N-butyl-2-[2-(4-chlorophenyl)propyl]-6-fluoro-3-oxoisoindoline-1-carboxamide (Example 12 above) (2.60 mmol, 1.05 g) were separated by a preparative HPLC system, equipped with a Chiralpak IA, 5μ, 250 mm×20 mm column, using MTBE/MeOH (95/5) as mobile phase, giving fraction 1 containing isomer E1, fraction 2 containing isomer E2 and fraction 3 containing isomer E3 and isomer E4.
Fraction 1 was concentrated in vacuo to give (0.219 g, 20.9%) of isomer E1: [α]D20=30 (c 1.0, MeCN), (ee=98.5%).
Fraction 2 was concentrated in vacuo to give (0.232 g, 22.1%) of isomer E2: [α]D20=156 (c 1.0, MeCN), (ee=99.3%).
Fraction 3 was concentrated and isomer E3 and isomer E4 were separated by a preparative HPLC system, equipped with a (R,R) Whelk-O1, 5μ, 250 mm×20 mm column, using Heptan/IPA (50/50) as mobile phase giving fraction 3 containing isomer E3, and fraction 4 containing isomer E4.
Fraction 3 was concentrated in vacuo to give (0.204 g, 19.4%) of isomer E3: [α]D20=−36 (c 1.0, MeCN), (ee=97.7%).
Fraction 4 was concentrated in vacuo to give (0.160 g, 15.2%) of isomer E4: [α]D20=−177 (c 1.0, MeCN), (ee=96.0%).
2-(biphenyl-2-ylmethyl)-N-(tert-butyl)-5-hydroxy-4-methyl-3-oxoisoindoline-1-carboxamide (Example 2)(0.233 mmol, 100 mg) was dissolved in Acetonitrile (2 ml) in a 2 ml micro vial and K2CO3 (0.256 mmol, 0.25 mg) was added and the tube were sealed. N2 (g) was bubbled through the mixture for 5 min. bromofluoromethane (g) was bubbled through the mixture for 30 sec. The reaction was performed in a micro oven (20 min, 140° C.). The solvent was removed by evaporation and the reaction mixture was purified by flashcromatography (started with isocratic Heptane/EtOAc 95/5 and then the EtOAc concentration was increased to 50%, (silica gel 60 0.004-0.063 mm). The product containing fractions was pooled and the solvent was removed by evaporation to give the title compound (68 mg, 63.3%).
1H-NMR (500 MHz, CDCl3): δ 7.45-7.25 (m, 11H), 5.82-5.79 (m, 1H), 5.71-5.69 (m, 1H), 5.47 (s, 1H), 5.16 (d, 1H), 4.47 (s, 1H), 4.43 (d, 1H), 2.59 (s, 3H), 1.08 (s, 9H); HRMS calculated for (C28H29FN2O3+H)+, 461.5611; found (ES [M+H]+), 461.5596.
2-(biphenyl-2-ylmethyl)-N-(tert-butyl)-5-hydroxy-4-methyl-3-oxoisoindoline-1-carboxamide (Example 2)(0.24 mmol, 104 mg) was dissolved in DCM and mesylchloride (0.36 mmol, 42 mg) was added, the mixture was cooled to 0° C. and TEA was added drop wise. The solution was heated to rt and stirred for 2 h until no starting material remained (LCMS). The solvent was removed by evaporation and the reaction mixture was purified by flashcromatography (started with isocratic Heptane/EtOAc 95/5 and then the EtOAc concentration was increased to 50%, (silica gel 60 0.004-0.063 mm). The product containing fractions was pooled and the solvent was removed by evaporation to give the title compound (62 mg, 50.4%).
1H-NMR (500 MHz, CDCl3): δ 7.47-7.42 (m, 8H), 7.30-7.25 (m, 3H), 5.39 (s, 1H), 5.16 (d, 1H), 4.47 (s, 1H), 4.43 (d, 1H), 2.36 (s, 3H), 2.70 (s, 3H), 1.08 (s, 9H); HRMS calculated for (C28H30N2O5S+H)+, 507.6335; found (ES [M+H]+), 507.6326.
Acetic acid (0.19 mmol, 12 mg) and o-(benzotriazol-1-yl)-n,n,n′,n′-tetramethyluronium tetrafluoroborate (0.26 mmol, 0.83 mg) was mixed at rt and stirred for 20 min. n-methylmorpholine (0.26 mmol, 0.26 mg) and N-[4-(aminomethyl)benzyl]-2-(biphenyl-2-ylmethyl)-3-oxoisoindoline-1-carboxamide (example 8)(0.13 mmol, 60 mg) was added and the reaction was stirred at rt over night. The solvent was removed by evaporation and the crude was purified by preparative HPLC (started with isocratic Acetonitrile/buffer 20/80 and then the Acetonitrile concentration was increased to 95%, the buffer was a mixture of Acetonitrile/water 10/90 and ammonium acetate (0.1 M, column KR-100-7-C8, 50 mm×250 mm, flow 40 ml/min). The product containing fractions was pooled and the product was freeze dried over night to give the title compound (10 mg, 15.3%). 1H-NMR (500 MHz, CDCl3): δ 7.75-7.71 (m, 1H), 7.64-7.65 (m, 2H), 7.52-7.47 (m, 1H), 7.46-7.37 (m, 6H), 7.37-7.22 (m, 3H), 7.13 (d, 2H), 6.86 (d, 2H), 6.04-5.99 (m, 1H), 5.67 (brs, 1H), 5.27 (d, 1H), 4.74 (s, 1H), 4.39 (d, 2H), 4.31 (d, 1H), 4.22-4.09 (m, 2H), 2.03 (s, 3H); HRMS calculated for (C32H29N3O3+H)+, 504.6140; found (ES [M+H]+), 504.6145.
Difluoroacetic acid (0.19 mmol, 19 mg) and o-(benzotriazol-1-yl)-n,n,n′,n′-tetramethyluronium tetrafluoroborate (0.26 mmol, 0.83 mg) was mixed at rt and stirred for 20 min. n-methylmorpholine (0.26 mmol, 0.26 mg) and N-[4-(aminomethyl)benzyl]-2-(biphenyl-2-ylmethyl)-3-oxoisoindoline-1-carboxamide (Example 8) (0.13 mmol, 60 mg) was added and the reaction was stirred at rt over night. The solvent was removed by evaporation and the crude was purified by preparative HPLC (started with isocratic Acetonitrile/buffer 20/80 and then the Acetonitrile concentration was increased to 95%, the buffer was a mixture of Acetonitrile/water 10/90 and ammonium acetate (0.1 M, column KR-100-7-C8, 50 mm×250 mm, flow 40 ml/min). The product containing fractions was pooled and the product was freeze dried over night to give the title compound (12 mg, 17.0%). 1H-NMR (500 MHz, CDCl3): δ 7.61-7.47 (m, 3H), 7.45-7.18 (m, 10H), 7.18-7.12 (m, 1H), 7.07 (d, 2H), 6.85 (d, 2H), 6.49 (brs, 1H), 6.27 (m, 1H), 5.90 (t, 1H), 5.20 (d, 1H), 4.69 (s, 1H), 4.41 (d, 2H), 4.29-4.21 (d, 1H), 4.21-4.05 (m, 2H); HRMS calculated for (C32H27F2N3O3+H)+, 540.5948; found (ES [M+H]+), 540.5895.
2-acetyl-3,6-difluorobenzoic acid (0.24 mmol, 50 mg) was dissolved in Methanol (1 ml) and (biphenyl-2-ylmethyl)amine (0.24 mmol, 46 mg) was added. The mixture was stirred at 50° C. over night to form the imine. Then tert-butyl isocyanide (0.24 mmol, 21 mg) dissolved in Acetonitrile was added to mixture. The reaction was stirred at 50° C. for 170 h. The product precipitated and was filtered of and the solid was washed with EtOAc to give the title compound (23 mg, 20.5%).
1H-NMR (500 MHz, CDCl3): δ 7.64-7.56 (m, 1H), 7.52-7.43 (m, 2H), 7.42-7.08 (m, 8H), 5.08 (s, 1H), 4.65 (dd, 2H), 1.37 (s, 3H), 0.94 (s, 9H); HRMS calculated for (C27H26F2N2O2+H)+, 449.5250; found (ES [M+H]+), 449.5248
4-fluoro-3-hydroxy-2-benzofuran-1(3H)-one (Preparation X)((0.87 mmol, 147 mg) was dissolved in Methanol (10 ml) and (biphenyl-2-ylmethyl)amine (0.87 mmol, 160 mg) was added and stirred for 20 min. Then 1,1,1-trifluoro-4-isocyanobutane (0.87 mmol, 120 mg) was added to the mixture. The reaction was stirred at rt over night. The solvent was removed by evaporation. The crude was purified by flashcromatography (started with isocratic heptane/Acetone 90/10 and then the Acetone concentration was increased to 50%, (silica gel 60 0.004-0.063 mm). The product containing fractions was pooled and the solvent was removed by evaporation to give the title compound (66 mg, 16%).
1H-NMR (500 MHz, CDCl3): δ 7.50-7.02 (m, 12H), 7.02-6.92 (m, 1H), 5.18-5.08 (D, 1H), 4.62 (s, 1H), 4.28 (d, 1H), 3.25-2.93 (m, 2H), 2.00-1.82 (m, 2H), 1.62-1.44 (m, 2H); HRMS calculated for (C26H22F4N2O2+H)+, 471.4788; found (ES [M+H]+), 471.4789.
2-(biphenyl-2-ylmethyl)-N-(tert-butyl)-5-hydroxy-4-methyl-3-oxoisoindoline-1-carboxamide (Example 2) (1.40 mmol, 0.6 g) was dissolved in THF (10 ml), K2CO3 (4.20 mmol, 0.58 g) and n-phenyltrifluoromethanesulfonimide (1.54 mmol, 0.55 g) was added. The reaction was performed in a microwave oven (10 min, 120° C.). The solvent was removed by evaporation and the crude was purified by flashchromatography (started with isocratic heptane/DCM 50/50 and then the DCM concentration was increased to 100%, then EtOAc added as eluent and the EtOAc concentration was increased to 30% (silica gel 60 0.004-0.063 mm). The product containing fractions was pooled and the solvent was removed by evaporation to give the title compound (0.655 g, 83.4%). 1H-NMR (500 MHz, CDCl3): δ 7.521 (d, 1H), 7.42-7.31 (m, 7H), 7.30-7.24 (m, 2H), 6.08 (s, 1H), 5.26 (d, 1H), 4.53 (s, 1H), 4.44 (d, 1H), 2.52 (s, 3H), 1.16 (s, 9H); HRMS calculated for (C28H27F3N2O5S+H)+, 561.6048; found (ES [M+H]+), 561.6019.
Fluoroacetic acid (0.19 mmol, 15 mg) and o-(benzotriazol-1-yl)-n,n,n′,n′-tetramethyluronium tetrafluoroborate (0.26 mmol, 83 mg) was mixed at rt and stirred for 20 min. n-methylmorpholine (0.26 mmol, 26 mg) and N-[4-(aminomethyl)benzyl]-2-(biphenyl-2-ylmethyl)-3-oxoisoindoline-1-carboxamide (Example 8)(0.13 mmol, 60 mg) was added and the reaction was stirred at rt over night. The solvent was removed by evaporation and the crude was purified by preparative HPLC (started with isocratic Acetonitrile/buffer 20/80 and then the Acetonitrile concentration was increased to 95%, the buffer was a mixture of Acetonitrile/water 10/90 and ammonium acetate (0.1 M, column KR-100-7-C8, 50 mm×250 mm, flow 40 ml/min). The product containing fractions was pooled and the product was freeze dried over night to give the title compound (35 mg, 51.6%). 1H-NMR (500 MHz, CDCl3): δ 7.63-7.58 (m, 1H), 7.57-7.48 (m, 2H), 7.44-7.35 (m, 4H), 7.35-7.21 (m, 6H), 7.19-7.15 (m, 1H), 7.11 (d, 2H), 6.91 (d, 2H), 6.63-6.58 (m, 1H), 6.55 (bs, 1H), 5.22 (d, 1H), 4.88 (s, 1H), 4.79 (s, 1H), 4.73 (s, 1H), 4.44 (d, 2H), 4.28 (d, 1H), 4.25-4.13 (m, 2H); HRMS calculated for (C32H28FN3O3+H)+, 522.6044; found (ES [M+H]+), 522.6043.
2-formylbenzoic acid (6.66 mmol, 1.00 g) was dissolved in Methanol (10 ml) and (diphenylmethyl)amine (6.66 mmol, 1.22 g) was added and stirred for 20 min. Then 1,1-difluoro-4-isocyanobutane (6.66 mmol, 0.79 g) was added to the mixture. The reaction was stirred at rt over night. The solvent was removed by evaporation. The crude was purified by flashcromatography (started with isocratic heptane/EtOAc 90/10 and then the EtOAc concentration was increased to 50%, (silica gel 60 0.004-0.063 mm). The product containing fractions was pooled and the solvent was removed by evaporation. The substance was not pure enough so it was purified by preparative HPLC (started with isocratic acetonitrile/buffer 20/80 and then the acetonitrile concentration was increased to 95%, the buffer was a mixture of acetonitrile/water 10/90 and ammonium acetate (0.1 M, column KR-100-7-C8, 50 mm×250 mm, flow 40 ml/min). The product containing fractions was pooled and the acetonitrile was removed by evaporation. The product was freeze dried over night to give the title compound (140 mg, 32.3%).
1H-NMR (500 MHz, CDCl3): δ 7.68-7.49 (m, 3H), 7.49-7.18 (m, 9H), 7.06-6.93 (m, 2H), 6.78 (s, 1H), 6.25-6.12 (m, 1H), 7.78-5.30 (m, 1H), 5.24 (s, 1H), 2.89-2.70 (m, 1H), 2.63-2.43 (m, 1H), 1.54-1.30 (m, 2H), 1.25-1.05 (m, 2H); HRMS calculated for (C26H24F2N2O2+H)+, 435,1884; found (ES [M+H]+), 435,1882.
N-(4,4-difluorobutyl)-2-(diphenylmethyl)-3-oxoisoindoline-1-carboxamide (Example 22) (1.63 mmol, 0.71 g) were separated by a preparative HPLC system, equipped with a ReproSil, 10μ, 250 mm×20 mm column, using Heptan/IPA (30/70) as mobile phase, giving fraction 1 containing isomer E1, fraction 2 containing isomer E2.
Fraction 1 was concentrated in vacuo to give (0.316 g, 44.5%) of isomer E1, ee=100%.
Fraction 2 was concentrated in vacuo to give (0.308 g, 43.4%) of isomer E2, ee=99.6%.
2-Formylbenzoic acid (2.72 g, 18.1 mmol) and 1-Phenylethanamine (2.30 mL, 18.1 mmol) was added to a flask, MeOH (15 ml) was then added and the mixture was left stirring in r.t. for 2 h. (Isocyanomethyl)benzene (2.12 g, 18.1 mmol) dissolved in MeCN (25 ml) was added to the mixture and the reaction was left stirring in r.t. over night. The reaction was finished the next morning and the solvent was evaporated. The crude was dissolved in DCM (20 mL) and extracted with water (10 mL), the organic phase was collected and most of the solvent was evaporated then EtOAc was added and the solvent was evaporated. The crude was purified by flash chromatography (SP1™ flash system from Biotage™, silica cartridge), using heptane and EtOAc as eluent, followed by concentration in vacuo afforded the title compound (4.16 g, 62%).
13C-NMR (500 MHz, CDCl3) δ 170.73, 170.47, 169.09, 168.26, 142.14, 142.02, 140.45, 140.37, 137.34, 137.14, 132.79, 132.75, 131.09, 130.99, 129.38, 129.35, 129.21, 129.10, 128.96, 128.71, 128.50, 128.27, 128.15, 128.02, 127.96, 127.68, 127.58, 127.49, 124.32, 124.26, 122.93, 122.78, 63.75, 63.31, 52.56, 52.12, 43.89, 43.39, 18.19, 17.58; HRMS calculated for (C24H22N2O2+H)+, 371.1760 found (ES [M+H]+), 371.1768 and 371.1771 for respectively diasteromer.
The four stereo isomers of N-benzyl-3-oxo-2-(1-phenylethyl)isoindoline-1-carboxamide (example 24) were separated by a preparative HPLC system, equipped with a Chiralpak AD-H 5μ 250 mm×20 mm column, using Heptan/EtOH (85/15) as mobile phase, giving fraction 1 containing isomer 1, fraction 2 containing isomer 2 and isomer 3, and fraction 3 containing isomer 4. Fraction 1 was concentrated in vacuo to give (E1) (0.602 g, 22.8%) of isomer 1: [α]D20=+121.9 (c 1.0, MeCN); HRMS calculated for (C24H22N2O2+H)+, 371.1759 found (ES [M+H]+), 371.1760
Fraction 3 was concentrated in vacuo to give (E4) (0.516 g, 19.5%) of isomer 4: [α]D20=−121.3 (c 1.0, MeCN); HRMS calculated for (C24H22N2O2+H)+, 371.1759 found (ES [M+H]+), 371.1779
Fraction 2 was concentrated and isomer 2 and isomer 3 were separated by a preparative HPLC system, equipped with a Chiralpak IA 5μ 250 mm×20 mm column, using Heptan/EtOH (80/20) as mobile phase giving fraction 1 containing isomer 2, and fraction 2 containing isomer 3.
Fraction 1 was concentrated in vacuo to give (E2) (0.571 g, 21.6%) of isomer 2: [α]D20=+161.0 (c 1.0, MeCN); HRMS calculated for (C24H22N2O2+H)+, 371.1759 found (ES [M+H]+), 371.1761
Fraction 2 was concentrated in vacuo to give (E3) (0.718 g, 27.1%) of isomer 3: [α]D20=−153.0 (c 1.0, MeCN); HRMS calculated for (C24H22N2O2+H)+, 371.1759 found (ES [M+H]+), 371.1758
The 3-amino-2,2-dimethylpropan-1-ol (0.276 mmol) was dissolved in MeCN (1 mL) and added to 2-Formylbenzoic acid (0.276 mmol) dissolved in MeOH (1 mL), this was stirring for 30 min in r.t. 1-chloro-3-(isocyanomethyl)benzene (0.248 mmol) dissolved in MeCN (2 mL) was added to the mixture and the reaction was left stirring in r.t. over night. The reaction was finished the next morning and the solvent was evaporated. The crude was dissolved in DCM (4 mL) and extracted with water (3 mL), the organic phase was collected and the solvent was evaporated. The crude was dissolved in DMSO (1 ml), filtrated and purified by preparative HPLC using a Waters FractionLynx III HPLC system with a mass triggered fraction collector, equipped with an Xbridge Prep C18 150×19 mm column using a MeCN/0.2% NH3 buffer system with a gradient from 100% A (5% MeCN+95% 0.2% NH3) to 100% B (95% MeCN+5% 0.2% NH3) as mobile phase, followed by concentration in vacuo afforded the title compound (0.025 g, 23%).
1H-NMR* (600 MHz, DMSO-d6, DMSO*) δ 9.29-9.17 (m, 1H), 7.77-7.46 (m, 4H), 7.4-7.15 (m, 4H), 5.48-5.4 (s, 1H), 4.74-4.63 (m, 1H), 4.4-4 26 (m, 2H), 3.79-3.71 (d, 1H), 3.19-3.05 (m), 2.76-2.64 (d), 0.88-0.75 (s, 6H); HRMS calculated for (C21H23Cl N2O3+H)+, 387.1475 found (ES [M+H]+), 387.1475
2-Formylbenzoic acid (0.060 g, 0.44 mmol), 2-(4-chlorophenyl)propan-1-amine hydrochloride (0.068 g, 0.40 mmol) and TEA (0.062 mL, 0.44 mmol) was added to a flask and dissolved in MeOH (2 mL), this was stirring for 2 h in r.t. 4-(isocyanomethyl)-5-methyl-2-phenyl-1,3-oxazole (0.079 g, 0.40 mmol) dissolved in MeCN (2 mL) was added to the mixture and the reaction was left stirring in r.t. for two days. The solvent was evaporated, the crude was dissolved in DCM (4 mL) and extracted with water (3 mL), the organic phase was collected and the solvent was evaporated. The crude was purified by flash chromatography (SP1™ flash system from Biotage™, silica cartridge), using heptane and EtOAc as eluent, followed by concentration in vacuo afforded the title compound (0.017 g, 8.5%). 1H-NMR (500 MHz, CDCl3) δ 8.22-7.34 (m, 9H), 7.21-7.01 (m, 4H), 6.56-6.34 (m, 1H), 4.64-3.98 (m, 3H), 3.42-3.12 (m, 2H), 2.53-2.16 (m, 3H), 1.4-1.08 (m, 3H);
1-(1-methyl-5-phenyl-1H-pyrazol-3-yl)methanamine (0.400 mmol) was dissolved in MeCN (1 mL) and added to 2-Formylbenzoic acid (0.400 mmol) dissolved in MeOH (1 mL), this was stirring for 1 h in r.t. tert-butyl isocyanide (0.400 mmol) was added to the mixture and the reaction was left stirring in r.t. for two days. The solvent was evaporated, the crude was dissolved in DCM (4 mL) and extracetd with water (3 mL), the organic phase was collected and the solvent was evaporated. The crude was purified by flash chromatography (SP1™ flash system from Biotage™, silica cartridge), using heptane and EtOAc as eluent, followed by concentration in vacuo afforded the title compound (0.078 g, 48.4%). 1H-NMR (500 MHz, CDCl3) δ 7.94-7.36 (m, 9H), 6.39-6.28 (m, 1H), 5.28-5.07 (m, 2H), 4.39-4.23 (d, 1H), 3.92-3.79 (s, 3H), 1.44-1.2 (s, 9H); HRMS calculated for (C24H26N4O2+H)+, 403.2134 found (ES [M+H]+), 403.2156
1-biphenyl-2-ylmethanamine (0.225 g, 1.23 mmol) and 5-bromo-3-hydroxy-2-benzofuran-1(3H)-one (Preparation W) (0.283 g, 1.24 mmol) was added to a flask, MeOH (1 mL) was added an the mixture was left stirring in r.t. for 3 h. tert-butyl isocyanide (0.139 mL, 1.23 mmol) was added to the mixture and the reaction was left stirring in r.t. over night. The solvent was evaporated, the crude was dissolved in DCM (4 mL) and extracted with water (3 mL), the organic phase was collected and the solvent was evaporated. The crude was purified by flash chromatography (SP1™ flash system from Biotage™, silica cartridge), using heptane and EtOAc as eluent, followed by concentration in vacuo afforded the title compound (0.191 g, 32.4%). 13C-NMR (500 MHz, CDCl3) δ 168.58, 166.16, 143.65, 142.49, 140.52, 133.37, 132.34, 130.62, 130.46, 129.15, 128.62, 128.35, 128.15, 127.99, 127.87, 127.28, 126.31, 125.21, 124.92, 62.87, 51.61, 42.93, 31.88, 28.99, 27.52, 27.24, 22.58, 13.28; HRMS calculated for (C26H25BrN2O2+H)+, 477.1178 found (ES [M+H]+), 477.1173
1-biphenyl-2-ylmethanamine (0.106 g, 0.578 mmol) and 5-bromo-2-formylbenzoic acid (commercially available)(0.132 g, 0.578 mmol) was added to a flask, MeOH (1 mL) was added an the mixture was left stirring in r.t. for 30 mins. tert-butyl isocyanide (0.065 mL, 0.578 mmol) was added to the mixture and the reaction was left stirring in r.t. for 16 h. The solvent was evaporated, the crude was dissolved in DCM (4 mL) and extracted with water (3 mL), the organic phase was collected and the solvent was evaporated. The crude was purified by flash chromatography (SP1™ flash system from Biotage™, silica cartridge), using heptane and EtOAc as eluent, followed by concentration in vacuo afforded the title compound (0.143 g, 51.8%). 1H-NMR (500 MHz, CDCl3) δ 7.89-7.82 (m, 1H), 7.78-7.71 (m, 1H), 7.56-7.24 (m, 10H), 5.47-5.33 (d, 1H), 4.72-4.63 (s, 1H), 4.23-4.07 (d, 1H), 1.39-1.13 (s, 9H); HRMS calculated for (C26H25BrN2O2+H)+, 477.1178 found (ES [M+H]+), 477.1184
The 1-biphenyl-2-ylmethanamine (0.400 mmol) was dissolved in MeCN (1 mL) and added to 2-Formylbenzoic acid (0.400 mmol) dissolved in MeOH (1 mL), this was stirring for 30 min in r.t 1,1-difluoro-4-isocyanobutane (preparation P) (0.400 mmol) dissolved in MeCN (2 mL) was added to the mixture and the reaction was left stirring in r.t. over night. The reaction was finished the next morning and the solvent was evaporated. The crude was dissolved in DCM (4 mL) and extracted with water (3 mL), the organic phase was collected and the solvent was evaporated. The crude was dissolved in DMSO (1 ml), filtrated and purified by preparative HPLC using a Waters FractionLynx I HPLC system with a mass triggered fraction collector, equipped with an Xbridge Prep C18 150×19 mm column using a MeCN/0.2% NH3 buffer system with a gradient from 100% A (5% MeCN+95% 0.2% NH3) to 100% B (95% MeCN+5% 0.2% NH3) as mobile phase, followed by concentration in vacuo afforded the title compound (0.057 g, 33%). 1H-NMR* (600 MHz, DMSO-d6, DMSO*) δ 8.526-8.3 (m, 1H), 7.75-7.03 (m, 13H), 6.2-5.85 (m, 1H), 5.27-5.07 (d, 1H), 4.83-4.66 (s, 1H), 4.13-3.85 (d, 1H), 3.1-2.83 (m), 1.81-1.55 (m, 2H), 1.5-1.27 (m, 2H); HRMS calculated for (C26H24F N2O2+H)+, 435.1884 found (ES [M+H]+), 435.1865
The 1-biphenyl-2-ylmethanamine (0.370 mmol) was dissolved in MeCN (1 mL) and added to 5-fluoro-3-hydroxy-2-benzofuran-1(3H)-one (preparation X)(0.370 mmol) dissolved in MeOH (1 mL), this was stirring for 30 min in r.t. (2,2-difluoro-1,3-benzodioxol-5-yl)methyl isocyanide (preparation R) (0.370 mmol) dissolved in MeCN (2 mL) was added to the mixture and the reaction was left stirring in r.t. for 3 days. The solvent was evaporated and, the crude was dissolved in DCM (4 mL) and extracted with water (3 mL), the organic phase was collected and the solvent was evaporated. The crude was dissolved in DMSO (1 ml), filtrated and purified by preparative HPLC using a Waters FractionLynx I HPLC system with a mass triggered fraction collector, equipped with an Xbridge Prep C18 150×19 mm column using a MeCN/0.2% NH3 buffer system with a gradient from 100% A (5% MeCN+95% 0.2% NH3) to 100% B (95% MeCN+5% 0.2% NH3) as mobile phase, followed by concentration in vacuo afforded the title compound (0.053 g, 26%). 1H-NMR* (600 MHz, DMSO-d6, DMSO*) δ 8.95-8.83 (m, 1H), 7.76-7.64 (m, 1H), 7.48-6.87 (m, 14H), 5.18-5.08 (d, 1H), 4.84-4.78 (s, 1H), 4.2-3.95 (m); HRMS calculated for (C30H21F3N2O4+H)+, 531.1532 found (ES [M+H]+), 531.1537
A mixture of 2-formylbenzoic acid (2.50 g, 16.7 mmol) and 1-biphenyl-2-ylmethanamine (3.05 g, 16.7 mmol) in MeOH (55 ml) was stirred at room temperature for 1 h and then tert-butyl isocyanide (1.38 g, 16.7 mmol) was added. The resulting mixture was stirred at room temperature over night and concentrated under reduced pressure. Crystals were obtained by adding ethanol to the residue. The crystals (2.06 g) were filtered off and dried in vacuo. The filtrate was purified by flash chromatography (SP1™ flash system from Biotage™, silica cartridge), using ethyl acetate (gradient from 6 to 50%) in heptane as eluent. Removal of the solvent gave 2.05 g of a white solid. The products from crystallisation and chromatography were combined and triturated with methanol giving 2.88 g of a white solid. The remaining material was purified by preparative HPLC giving a second crop of 0.70 g.
1H NMR (500 MHz, CD3OD) δ 7.71 (dm, 1H), 7.56 (m, 1H), 7.50 (m, 1H), 7.42 (dm, 1H), 7.38-7.24 (m, 9H), 5.37 (d, 1H), 4.71 (s, 1H), 4.15 (d, 1H), 1.22 (s, 9H); HRMS calculated for (C26H26N2O2+H)+, 399.2066; found (ESI [M+H]+), 399.2073.
The first crop (2.88 g) of example 33 above was separated into its enantiomers on a Chiralpak IA using 25% 2-propanol in heptane. Concentration under reduced pressure gave 1.39 g of isomer 1 and 1.25 g of isomer 2.
(i) N-benzyl-6-bromo-3-oxo-2-[(1R)-1-phenylethyl]isoindoline-1-carboxamide
(R)-(+)-1-Phenylethylamine (0.12 g, 1.0 mmol) was added to a slurry of 5-bromo-3-hydroxy-2-benzofuran-1(3H)-one in MeOH (5 ml). The solution was stirred for 30 mins at room temperature. Benzyl isocyanide (0.12 g, 1.0 mmol) was added and the resulting mixture was stirred at room temperature over night and evaporated. Purification by flash chromatography (SP1™ flash system from Biotage™, silica cartridge), using ethyl acetate (gradient from 6 to 50%) in heptane as eluent, followed by concentration in vacuo afforded the title compound (0.33 g, 72%) as a white powder. 1H NMR (500 MHz, CD3OD) δ 7.68 (m, 2H), 7.52 (m, 1H), 7.44 (m, 1H), 7.36-7.20 (m, 8H), 7.68 (m, 1H), 5.61 and 5.32 (q, 1H, rotamers), 5.22 and 4.79 (s, 1H, rotamers), 4.37 (br s, 1H), 3.97 (m, 1H), 1.74 and 1.61 (d, 3H, rotamers); MS (ESI) m/z 449.0 ([M+H]+);
A mixture of N-benzyl-6-bromo-3-oxo-2-[(1R)-1-phenylethyl]isoindoline-1-carboxamide (0.10 g, 0.22 mmol), zinc cyanide (0.040 g, 0.34 mmol), and Pd(PPh3)4 (0.026 g, 0.022 mmol) in DMF (3 ml) was degassed by argon-bubbling for 15 mins. The mixture was then heated at 200° C. for 30 mins in a microwave reactor and concentrated in vacuo. Purification by flash chromatography (SP1™ flash system from Biotage™, silica cartridge), using ethyl acetate (gradient from 9 to 76%) in heptane as eluent, followed by concentration in vacuo afforded the title compound (0.064 g, 72%) as a white solid. 1H NMR (500 MHz, (CD3)2CO) δ 8.24 (br s, 1H), 7.94-7.81 (m, 3H), 7.52 (m, 1H), 7.36-7.19 (m, 8H), 7.13 (m, 1H), 5.63 and 5.21 (q, 1H), 5.41 and 5.04 (s, 1H), 4.43 (m, 1H), 4.15 (m, 1H), 1.84 and 1.67 (d, 3H, rotamers). MS (ESI) m/z 396.0 ([M+H]+); HRMS calculated for (C26H21N3O2+H)+, 396.1712; found (ESI [M+H]+), 396.1739.
was synthesised according the procedure described in example 35 above using 1-biphenyl-2-ylmethanamine instead of (R)-(+)-1-phenylethylamine and tert-butyl isocyanide instead of benzyl isocyanide. HRMS calculated for (C27H25N3O2+H)+, 424.2025; found (ESI [M+H]+), 424.2010.
A mixture of but-2-ynoic acid (0.42 g, 5.0 mmol), 1-(2-bromophenyl)methanamine (0.93 g, 5.0 mmol), and 2-furaldehyde (0.48 g, 5.0 mmol) in MeOH (20 ml) was stirred at room temperature for 1 h and then tert-butyl isocyanide (0.42 g, 5.0 mmol) was added. The resulting mixture was stirred at room temperature over night and concentrated under reduced pressure. The crude product was used in the next step without purification.
A mixture of N-(2-bromobenzyl)-N-[2-(tert-butylamino)-1-(2-furyl)-2-oxoethyl]but-2-ynamide (2.10 g, 0.487 mmol) from step (i) above and ytterbium (III) trifluoromethanesulfonate (0.302 g, 0.487 mmol) in xylene (100 ml) was heated at reflux for 1.5 h. A white precipitate was filtered off giving 0.87 g of pure product. The filtrate was concentrated and purified by flash chromatography (SP1™ flash system from Biotage™, silica cartridge), using ethyl acetate (gradient from 30 to 70%) in heptane as eluent giving a second crop of 0.32 g making the total yield 1.19 g (57%). 1H NMR (500 MHz, (CD3OD) δ 7.60 (m, 1H), 7.36-7.27 (m, 2H), 7.21 (m, 1H), 7.08 (m, 1H), 6.95 (m, 1H) 5.23 (d, 1H), 4.66 (s, 1H), 4.37 (d, 1H), 2.55 (s, 3H), 1.30 (s, 9H).
A mixture of but-2-ynoic acid (0.050 g, 0.60 mmol), 1-biphenyl-2-ylmethanamine (0.11 g, 0.60 mmol), and 1-(methylsulfonyl)-1H-pyrrole-2-carbaldehyde (J. Am. Chem. Soc., 1998, 1741) (0.10 g, 0.60 mmol) in MeOH (6 ml) was stirred at room temperature for 1 h. and then tert-butyl isocyanide (0.050 g, 0.60 mmol) was added. The resulting mixture was stirred at room temperature for three days giving a white precipitate. The precipitate was filtered off and dried in vacuo giving 0.23 g (76%) of a white powder which was used in the next step without further purification. MS (ESI) m/z 506.2 ([M+H]+).
A solution of N-(biphenyl-2-ylmethyl)-N-{2-(tert-butylamino)-1-[1-(methylsulfonyl)-1H-pyrrol-2-yl]-2-oxoethyl}but-2-ynamide from step (i) above (0.050 g, 0.099 mol) in dioxane (4 ml) and 1-butyl-3-methyl-1H-imidazol-3-ium hexafluorophosphate (BMIMPF6, 0.2 ml) was heated at 200° C. for 30 mins in a microwave reactor. The mixture was concentrated under reduced pressure and the residue was partitioned between ethyl acetate and water. The layers were separated and the aqueous phase was extracted with two portions of ethyl acetate. The combined organic layers were washed with two portions of water, dried over MgSO4, and concentrated under reduced pressure. Purification by flash chromatography (SP1™ flash system from Biotage™, silica cartridge), using ethyl acetate (gradient from 12 to 100%) in heptane as eluent, followed by concentration in vacuo afforded the title compound (0.055 g, 56%) as a white solid. 1H NMR (500 MHz, (CD3)2CO) δ 8.00 (br s, 1H), 7.53 (d, 1H), 7.37-7.20 (m, 10H), 5.32 (d, 1H), 4.62 (s, 1H), 4.10 (d, 1H), 2.97 (s, 3H), 2.67 (s, 3H), 1.21 (s, 9H); MS (ESI) m/z 506.2 ([M+H]+).
was synthesised according the procedure in example 38 described above using propriolic acid instead of but-2-ynoic acid. MS (ESI) m/z 492.1 ([M+H]+).
A mixture of 3-(trimethylsilyl)prop-2-ynoic acid (0.071 g, 0.50 mmol), 1-(4-chlorophenyl)methanamine (0.071 g, 0.50 mmol), and 2-furaldehyde (0.048 g, 0.50 mmol) in MeOH (2 ml) was stirred at room temperature for 1 h and then tert-butyl isocyanide (0.042 g, 0.50 mmol) was added. The resulting mixture was stirred at room temperature for 2 days and concentrated under reduced pressure. The crude product was used in the next step without purification; MS (ESI) m/z 444.9 ([M+H]+).
A mixture of N-[2-(tert-butylamino)-1-(2-furyl)-2-oxoethyl]-N-(4-chlorobenzyl)-3-(trimethylsilyl)prop-2-ynamide (0.223 g, 0.50 mmol) from step (i) above, ytterbium (III) trifluoromethanesulfonate (0.124 g, 0.40 mmol), and 1-butyl-3-methyl-1H-imidazol-3-ium hexafluorophosphate (BMIMPF6, 0.3 ml) in dioxane (15 ml) was heated at 200° C. for 30 mins in a microwave reactor and concentrated under reduced pressure. Purification by flash chromatography (SP1™ flash system from Biotage™, silica cartridge), using ethyl acetate (gradient from 30 to 70%) in heptane as eluent, followed by concentration in vacuo afforded 0.032 g (17%) of the title compound. 1H NMR (500 MHz, (CD3)2SO) δ 9.87 (s, 1H), 8.13 (s, 1H), 7.41 (dm, 2H), 7.26 (dm, 1H), 7.22 (dm, 2H), 7.03 (m, 1H), 6.98 (m, 1H), 5.07 (d, 1H), 4.78 (s, 1H), 3.97 (d, 1H), 1.24 (s, 9H); MS (ESI) m/z 373.0 ([M+H]+); HRMS calculated for (C20H21ClN2O3+H)+, 373.1319; found (ESI [M+H]+), 373.1338.
The title compound was isolated as by-product in the synthesis of N-(tert-butyl)-2-(4-chlorobenzyl)-5-hydroxy-3-oxoisoindoline-1-carboxamide
HRMS calculated for (C20H21ClN2O3+H)+, 373.1319; found (ESI [M+H]+), 373.1324.
The title compound was isolated as by-product in the synthesis of 2-(biphenyl-2-ylmethyl)-N-(tert-butyl)-5-hydroxy-3-oxoisoindoline-1-carboxamide,
HRMS calculated for (C26H26N2O3+H)+, 415.2022; found (ESI [M+H]+), 415.2005.
A mixture of but-2-ynoic acid (0.025 g, 0.30 mmol), 1-biphenyl-4-ylmethanamine (0.055 g, 0.30 mmol), and 2-furaldehyde (0.029 g, 0.30 mmol) in MeOH (2 ml) was stirred at room temperature for 30 mins and then tert-butyl isocyanide (0.025 g, 0.30 mmol) was added. The resulting mixture was stirred at room temperature for 3 days and concentrated under reduced pressure giving 0.125 g (97%) of the title compound. The crude product was used in the next step without purification; MS (ESI) m/z 429.0 ([M+H]+).
A mixture of N-(biphenyl-4-ylmethyl)-N-[2-(tert-butylamino)-1-(2-furyl)-2-oxoethyl]but-2-ynamide (0.125 g, 0.29 mmol) from step (i) above and ytterbium (III) trifluoromethanesulfonate (0.037 g, 0.06 mmol) in dioxane (20 ml) was heated at 200° C. for 30 mins in a microwave reactor and concentrated under reduced pressure. The residue was partitioned between DCM and saturated aqueous NaHCO3 in a Phase Separator. The aqueous phase was extracted with two more portions of DCM and the combined organic layers were concentrated in vacuo. Purification by preparative HPLC using a FractionLynx I HPLC system equipped with a Gemini 5u C18 110A 21.2×100 mm column using a gradient of 5 to 95% CH3CN in 0.2% NH3 as mobile phase, followed by concentration in vacuo gave 0.073 g (57%) of the title compound. 1H NMR (500 MHz, (CD3)2SO) δ 9.61 (s, 1H), 8.10 (s, 1H), 7.61 (m, 4H), 7.59 (m, 2H), 7.32 (m, 1H), 7.26 (dm, 2H), 7.06 (dm, 1H), 6.95 (dm, 1H), 5.12 (d, 1H), 4.73 (s, 1H), 3.91 (d, 1H), 1.23 (s, 9H); MS (ESI) m/z 429.2 ([M+H]+); HRMS calculated for (C27H28N2O3+H)+, 429.2178; found (ESI [M+H]+), 429.2144.
A mixture of 2-(2-bromobenzyl)-N-tert-butyl-5-hydroxy-4-methyl-3-oxoisoindoline-1-carboxamide (example 37 above) (0.078 g, 0.18 mmol), (4-fluorophenyl)boronic acid (0.030 g, 0.22 mmol), Pd(PPh3)4 (0.010 g, 0.009 mmol), and aqueous Cs2CO3 (0.117 g in 0.2 ml water) in 1,2-dimethoxyethane (1.0 ml) in a 2 ml microwave reactor vial was degassed by argon-bubbling for 5 mins. The mixture was then heated at 130° C. for 15 mins in a microwave reactor and concentrated in vacuo. Hydrochloric acid (2 ml of a 2 M solution) was added to the residue and the aqueous phase was extracted with three portions of DCM in a Phase Separator. The combined organic layers were concentrated under reduced pressure. Purification by preparative HPLC using a FractionLynx II HPLC system equipped with a Sunfire 5 μm C18 OBD 19×150 mm column using a gradient of 5 to 95% CH3CN in 0.1 M HCO2H as mobile phase, followed by concentration in vacuo gave 0.078 g (97%) of the title compound. 1H NMR (500 MHz, (CD3)2SO) δ 9.61 (s, 1H), 7.90 (s, 1H), 7.32 (m, 4H), 7.20 (m, 4H), 7.00 (dm, 1H), 6.91 (dm, 1H), 5.07 (d, 1H), 4.54 (s, 1H), 3.84 (d, 1H), 2.41 (s, 3H), 1.08 (s, 9H); MS (ESI) m/z 447.4 ([M+H]+); HRMS calculated for (C27H27FN2O3+H)+, 447.2084; found (ESI [M+H]+), 447.2092.
1H-isochromene-1,3(4H)-dione (1.50 g, 6.94 mmol) and 2-(4-chlorophenyl)ethanamine (1.08 g, 6.94 mmol) were mixed in toluene (5 ml) under nitrogen atmosphere and the resulting mixture was refluxed for 20 hours. The mixture was cooled by dilution with 20 ml toluene which resulted in formation of a white solid, which was collected by filtration to give the title compound (1.40 g, 67%).
1H-NMR (500 MHz, CDCl3) δ 8.23 (d, 1H), 7.61 (t, 1H), 7.48 (t, 1H), 7.31-7.23 (m, 5H), 4.23-4.18 (m, 2H), 4.04 (s, 2H), 2.94-2.89 (m, 2H).
2-[2-(4-chlorophenyl)ethyl]isoquinoline-1,3(2H,4H)-dione (0.50 g, 1.67 mmol) was mixed with SeO2 (0.19 g, 1.67 mmol) in toluene (10 ml) and heated at reflux for 16 hours. Solid material was removed by filtration and the filtrate was concentrated under reduced pressure. The residue was filtered through a silica gel plug, eluting with DCM. The solvent was removed under reduced pressure to give the title compound (0.52 g, 99%). [M+H] (ES) 314.0
2-[2-(4-chlorophenyl)ethyl]isoquinoline-1,3,4(2H)-trione (0.15 g, 0.47 mmol) and benzyl amine (0.076 g, 0.71 mmol) were mixed in toluene (2 ml) and the resulting mixture was heated at 60° C. for 16 hours. The solvent was removed under reduced pressure. The residue was purified by flash chromatography using a Biotage SP1 with ethyl acetate/heptane as mobile phase and further purified by reverse phase HPLC equipped with a Kromasil C8 column and MeCN/water (0.1M ammonium acetate) as mobile phase. The product fraction was freeze-dried to give the title compound (0.023 g, 12%).
HRMS: calculated for (C24H21ClN2O3+H)+ 421.1319; found (ES [M+H]+) 421.1336.
1H-NMR (500 MHz, DMSO-d6) δ 7.69-7.61 (m, 3H), 7.58-7.51 (m, 2H), 7.36-7.16 (m, 9H), 4.40-4.28 (m, 2H), 3.64-3.56 (m, 1H), 3.28-3.20 (m, 1H), 2.93-2.75 (m, 2H).
2-formylbenzoic acid (9.12 mmol, 1.37 g) was dissolved in Methanol (10 ml) and 1-(3′,4′-difluorobiphenyl-2-yl)methanamine (9.12 mmol, 2.00 g)(prep AI) was added and stirred for 20 min. Then 2-isocyano-2-methylpropane (9.12 mmol, 0.76 g) was added to the mixture. The reaction was stirred at rt over night. The solvent was removed by evaporation. The crude was purified by flash chromatography (started with isocratic heptane/EtOAc 90/10 and then the EtOAc concentration was increased to 50%, (silica gel 60 0.004-0.063 mm). The product containing fractions was pooled and the solvent was removed by evaporation. The substance was not pure enough so it was purified by preparative HPLC (started with isocratic acetonitrile/buffer 20/80 and then the acetonitrile concentration was increased to 95%, the buffer was a mixture of H2O/ACN/FA (94.8/5/0.2) (0.1 M, column KR-100-7-C8, 50 mm×250 mm, flow 40 ml/min). The product containing fractions was pooled and the acetonitrile was removed by evaporation to give the title compound (2.10 g, 53.1%). 1H-NMR (500 MHz, CDCl3): δ 7.60-7.54 (m, 2H); 7.54-7.48 (m, 1H); 7.42-7.37 (m, 1H); 7.33-7.27 (m, 3H); 7.22-7.13 (m, 2H); 7.12-7.06 (m, 1H); 7.02-6.96 (m, 1H); 6.08 (s, 1H); 5.18 (d, 1H); 4.56 (s, 1H); 4.37-4.30 (d, 1H), 1.15 (s, 9H).
N-(tert-butyl)-2-[(3′,4′-difluorobiphenyl-2-yl)methyl]-3-oxoisoindoline-1-carboxamide (Example 46)(4.83 mmol, 2.10 g) were separated by a preparative HPLC system, equipped with a Chiralpak AD, 5μ, 250 mm×20 mm column, using Heptan/EtOH (75/25) as mobile phase, giving fraction 1 containing isomer E1, fraction 2 containing isomer E2.
Fraction 1 was concentrated in vacuo to give (0.903 g, 43.0%) of isomer E1, ee=99.9%. HRMS calculated for (C26H24F2N2O2+H)+, 435.1884; found (ES [M+H]+), 435.1881.
Fraction 2 was concentrated in vacuo to give (0.908 g, 43.2%) of isomer E2, ee=99.9%. HRMS calculated for (C26H24F2N2O2+H)+, 435.1884; found (ES [M+H]+), 435.1894.
2-formylbenzoic acid (0.5 mmol, 75 mg) was dissolved in Methanol (10 ml) and 1-(4,4′-difluorobiphenyl-2-yl)methanamine (0.50 mmol, 110 mg) was added and stirred for 20 min. Then 2-isocyano-2-methylpropane (0.50 mmol, 42 mg) was added to the mixture. The reaction was stirred at rt over night. The solvent was removed by evaporation. The crude was purified by preparative HPLC (started with isocratic acetonitrile/buffer 20/80 and then the acetonitrile concentration was increased to 9
5%, the buffer was a mixture of H2O/ACN/FA (94.8/5/0.2) (0.1 M, column KR-100-7-C8, 50 mm×250 mm, flow 40 ml/min). The product containing fractions was pooled and the acetonitrile was removed by evaporation to give the title compound (138 mg, 63.5%). 1H-NMR (500 MHz, CDCl3): δ 7.76-7.72 (m, 1H); 7.60-7.52 (m, 2H); 7.49-7.44 (m, 1H), 7.29-7.18 (m, 3H); 7.14-7.08 (m, 2H); 7.06-6.98 (m, 2H); 5.62 (s, 1H); 5.11 (d, 1H); 4.59 (s, 1H); 4.35 (d, 1H); 1.10 (s, 9H). HRMS calculated for (C26H24F2N2O2+H)+, 435.1884; found (ES [M+H]+), 435.1904.
2-Formylbenzoic acid (0.060 g, 0.40 mmol), 2-(4-chlorophenyl)-2-methyl-propan-1-amine hydrochloride (0.088 g, 0.40 mmol) and NEt3 (55 μL, 0.40 mmol) were mixed in MeOH (2 ml) and the resulting mixture was stirred at ambient temperature for 20 mins. 1-Isocyanobutane (42 μL, 0.40 mmol) was added and the resulting mixture was stirred at ambient temperature for 18 hours. The mixture was partitioned between dichloromethane (7 ml) and water (1 ml). The layers were separated in a phase separator and the organic layer was concentrated under reduced pressure. The residue was purified by reverse phase HPLC using a Sunfire prep C18 column and 5-95% MeCN in 0.1 M aqueous HCO2H as mobile phase, which gave the title compound (0.087 g, 54%).
HRMS: calculated for (C23H27ClN2O2+H)+ 399.1839; found (ES [M+H]+) 399.1839.
1H-NMR* (500 MHz, DMSO-d6, DMSO*) δ 8.23-8.19 (m, 1H), 7.65-7.62 (m, 1H), 7.55-7.51 (m, 1H), 7.47-7.42 (m, 2H), 7.37-7.30 (m, 4H), 4.51 (s, 1H), 4.09 (d, 1H), 3.13 (d, 1H), 3.03-2.93 (m, 2H), 1.37-1.31 (m, 2H), 1.28-1.20 (m, 8H), 0.84 (t, 3H).
The following compounds were prepared, from appropriate intermediates (such as those described hereinbefore), according to or by analogy with methods described herein, and identified with accurate mass (HRMS) spectral data (Specified as HRMS calculated (M+H) and HRMS found (M+H). In some cases the ammonium adduct is detected, thus showing (M+NH4)):
(1R or 1S)-2-[(2S or 2R)-2-(4-chlorophenyl)propyl]-3-oxo-N-propylisoindoline-1-carboxamide;
(1S or 1R)-2-[(2R or 2S)-2-(4-chlorophenyl)propyl]-3-oxo-N-propylisoindoline-1-carboxamide;
(R or S)-2-(biphenyl-2-ylmethyl)-6-chloro-N-ethyl-3-oxoisoindoline-1-carboxamide;
(S or R)-2-(biphenyl-2-ylmethyl)-6-chloro-N-ethyl-3-oxoisoindoline-1-carboxamide;
Number | Date | Country | |
---|---|---|---|
60913367 | Apr 2007 | US | |
60830243 | Jul 2006 | US |