Non-dehiscent sesame variety S26

Abstract

A non-dehiscent sesame (Sesamum indicum L.) designated S26 has been found. Its degree of shatter resistance, or seed retention, makes S26 suitable for mechanized harvesting.

Description

BACKGROUND

Sesame, or Sesamum indicum, is a tropical annual cultivated worldwide for its oil and its nut flavored seeds. In the Middle East, sesame is consumed as tahini, a sesame butter or sesame paste which is often mixed with ground chickpea kernels in a food preparation called hummus. Sesame is used widely in China, Japan, and Korea as a cooking oil, and it is consumed for its medicinal qualities. In recent years, the Japanese have been identifying and quantifying the medicinal benefits of sesame. In vitro studies and animal studies have indicated several antioxidant properties of sesame (Namiki, M. 1995. “The chemistry and physiological functions of sesame,” Food Rev Int 11:281-329). In the western hemisphere, sesame is primarily used in the confectionary trade in rolls and crackers. Throughout the world, sesame seeds or paste are mixed into sweets, e.g., halva. Sesame oil use in the cosmetic industry continues to expand.

The sesame plant grows to a height of about 56-249 cm, and at its leaf axils are found capsules which contain the sesame seed. Upon maturity in nature, the capsules holding the sesame seeds begin to dry down, the capsules normally split open, and the seeds fall out. Commercially, the harvester tries to recover as much seed as possible from mature capsules. From ancient times through the present, the opening of the capsule has been the major factor in attempting to successfully collect the seed. Harvesting methods, weather, and plant characteristics all contribute to the amount of seed recovered.

The majority of the world's sesame is harvested manually. With manual non-mechanized methods, it is desirable for the sesame seed to fall readily from the plant. Upon physiological maturity, the sesame stalks are cut, tied into small bundles, and then stacked in shocks. Further harvesting procedures vary from country to country and from area to area within countries. Some move the shocks to a threshing floor so that the seed that falls out can be recovered. Others put plastic or cloth in the fields under the shocks to catch the seed. For manual harvesting methods in which the dried, shocked sesame is moved to a threshing floor or over a plastic or cloth, preferred plant varieties include dehiscent, or super shattering, in which less than 10% of the seeds set are retained in the capsule.

Other methods involve leaving the shocks in the fields, and when the shocks are dry, the sesame is turned upside down and struck with an implement to shake out all of the seed. For this type of manual harvesting method, it is preferred that the capsule hold as much of the sesame seed as possible until the farmer inverts the stalk. Plant varieties rated as shattering which retain as much seed as possible before inversion are preferred. Common methods of manual harvest are discussed in Weiss, E. A. “Sesame”, Oilseed crops (2 nd ed.), Chapter 5, Blackwell Science, Inc., Malden, Mass., p.131-164 (2000).

In an effort to mechanize the harvest of sesame, D. G. Langham introduced the use of swathers in Venezuela in 1944. The swathers were used to cut the sesame plants, manual labor was used to bundle and shock the cut plants, and combines were brought in to thrash the shocks. It was determined that seed shattering during mechanized harvesting methods caused considerable loss of sesame seed. While mechanization was considered to be essential for crop production in the Western hemisphere, it became obvious that the dehiscence of the sesame seed pod was the principal obstacle to the widespread acceptance of sesame as a commercial crop. (Langham, D. G. 1949. “Improvement of Sesame in Venezuela,” Proceedings First International Sesame Conference, Clemson Agricultural College, Clemson, S.C., pp. 74-79). As programs to introduce sesame production in the United States in Arizona, South Carolina, Nebraska, Oklahoma, and Texas were initiated, mechanization was considered essential due to high labor costs. Kalton, one of the Texas researchers, reported that the shattering nature of available strains was the main obstacle in complete mechanization of the sesame crop. (Kalton, R. 1949. “Sesame, a promising new oilseed crop for Texas,” Proc First International Sesame Conference, Clemson Agricultural College, Clemson, S.C., pp. 62-66).

In 1943, D. G. Langham found a mutation on a sesame plant. Capsules did not open on plants expressing this mutation. In succeeding generations, Langham showed that it was a recessive single gene which produced this indehiscence, where all the seeds were retained inside the unopened capsule. While it was believed that indehiscence would solve the problem of seed loss on mechanized harvesting, it was found that the capsules were too tough to effectively release the seed. Many of the capsules passed through a combine without opening. When more rigorous combining was attempted, an increase in efficiency of capsule opening was achieved but at the expense of seed quality. Seeds were broken due to the more rigorous combine conditions, and the broken seeds released free fatty acids. Chemical reactions with free fatty acids led to rancidity and concomitant undesirability of the harvested seed.

The indehiscent sesame varieties described above were used by various plant breeders in an attempt to develop desirable sesame lines. In addition to traditional cross-breeding approaches, some attempted to alter the chromosome numbers through tetraploids and interspecific crosses. Yermanos attempted to improve release of seed by increasing the length of the capsule so that there would be more surface for the combine to crack the capsules open (personal communication). Unfortunately, even with a small opening on the top of the capsule, a high percentage of broken seed was found on mechanized harvesting, preventing commercial use of this sesame line.

D. G. Langham reported in the late 1950's that the placenta attachment between each sesame seed and the placenta was important in the retention of seed in the capsule. He believed that he could improve the shatter resistance of sesame with increased placenta attachment but did not believe that all the seed could be retained in the capsule (Langham, D. G., Rodriguez, Maximo, and Reveron Esteban. 1956. “Dehiscencia y otras caracteristicas del ajonjoli, Sesamum indicum L., en relación con el problema de la cosecha”, Genesa, Maracay, Venezuela, pp. 3-16). However, Yermanos reported that during capsule maturity, the placenta attachment gradually weakens and is obliterated when the capsule is completely desiccated. (Yermanos, D. M. 1980. “Sesame. Hybridization of crop plants,” Am Soc Agronomy - Crop Sci of America, pp. 549-563). Thus, it appeared that the placenta attachment would have little effect on seed retention in dry, mature capsules during harvesting. A seamless gene which retained all the seed in the capsules was discovered by D. G. Langham and D. R. Langham in 1986. This was crossed with shattering types, and some progeny had an opening at the tip of the capsule. The seamless capsules were similar to the indehiscent capsules in that it was too difficult to remove the seed from the capsule without damaging the seed.

In 1982, the first non-shattering line (retaining 50-70% of the seeds set) requiring no manual labor was introduced. This line could be harvested by swathing the sesame, leaving it to dry in the field, and then picking it up by a combine. Although complete mechanization was achieved, extensive loss of seed due to adverse weather conditions continued to occur. (Langham, D. R., “Shatter resistance in sesame”, In: L. Van Zanten (ed.), Sesame improvements by induced mutations, Proc. Final FAO/IAEA Co - ord. Res. Mtng., IAEA, Vienna, TECDOC-1195, p.51-61 (2001)).

Other varieties were developed between 1988 and 1997 which allowed for direct combining with 70-90% seed retention, but extensive loss of seed due to wind and rain continued to occur. Lines that generally yielded 80% of the seed under ideal conditions would yield only 45-65% under adverse conditions. Thus, while many of the crosses began to moderate the deleterious effects of mechanized harvesting, none were able to increase the yields to the level of manually harvesting shattering cultivars.

U.S. Pat. No. 6,100,452 which issued Aug. 8, 2000, disclosed non-dehiscent sesame lines Sesaco 22 (S22), Sesaco 23 (S23), Sesaco 24 (S24), 19A, and 11W, representative seed having been deposited under ATCC accession number PTA-1400, PTA-1401, PTA-1402, PTA-1399, and PTA-1398, respectively. These sesame lines are characterized by their high degree of seed retention within the capsule despite adverse weather conditions such as wind and rain and the retention of a sufficient amount of sesame seed during mechanized harvesting to be competitive with manual harvesting with minimization of seed breakage.

U.S. patent application Ser. No. 10/135,855, filed Apr. 30, 2002, disclosed a non-dehiscent sesame cultivar S25, representative seed having been deposited under ATCC accession number PTA-4258. S25 is a stable, commercially suitable sesame line providing an early maturity cycle which extends the planting region to more northern latitudes and improved resistance against common fungal diseases.

A non-dehiscent variety designated S26 has now been found which provides some improvements over previously disclosed non-dehiscent sesame lines.

SUMMARY OF THE INVENTION

In one aspect, the present invention is seed of a sesame plant S26, a sample of the seed having been deposited under ATCC Patent Deposit Designation No. PTA-4317.

In another aspect, the present invention is a sesame plant or its parts produced by growing the seed of sesame plant S26, a sample of the seed having been deposited under ATCC Patent Deposit Designation No. PTA-4317. Pollen is one of the sesame plant parts of the present invention.

In another aspect, the present invention is a sesame plant having all the physiological and morphological characteristics of sesame plant S26, a sample of the seed of sesame plant S26 having been deposited under ATCC Patent Deposit Designation No. PTA-4317.

In another aspect, the present invention is a sesame plant having all the physiological and morphological characteristics of a sesame plant produced by growing the seed having been deposited under ATCC Patent Deposit Designation No. PTA-4317.

In another aspect, the present invention is a sesame plant or its parts having as a parent sesame plant S26, a sample of the seed of sesame plant S26 having been deposited under ATCC Patent Deposit Designation No. PTA-4317.

In another aspect, the present invention is seed from a progeny sesame plant having as a parent sesame plant S26, a sample of the seed of sesame plant S26 having been deposited under ATCC Patent Deposit Designation No. PTA-4317.

In another aspect, the present invention is seed from a progeny sesame plant having as a parent a sesame plant produced by the seed having been deposited under ATCC Patent Deposit Designation No. PTA-4317.

In another aspect, the present invention is a tissue culture of seed having been deposited under ATCC Patent Deposit Designation No. PTA-4317.

In another aspect, the present invention is a tissue culture of sesame plant S26 or its parts, a sample of the seed of sesame plant S26 having been deposited under ATCC Patent Deposit Designation No. PTA-4317.

In another aspect, the present invention is a sesame plant regenerated from a tissue culture of a seed having been deposited under ATCC Patent Deposit Designation No. PTA-4317, wherein the regenerated sesame plant has all the physiological and morphological characteristics of a sesame plant produced by the seed deposited under ATCC Patent Deposit Designation No. PTA-4317.

In another aspect, the present invention is a sesame plant regenerated from a tissue culture of sesame plant S26, a sample of the seed of sesame plant S26 having been deposited under ATCC Patent Deposit Designation No. PTA-4317, wherein the regenerated sesame plant has all the physiological and morphological characteristics of sesame plant S26.

In another aspect, the present invention is a method of producing sesame seed, comprising crossing a first parent sesame plant with a second parent sesame plant, wherein the first or second parent sesame plant was produced by seed having been deposited under ATCC Patent Deposit Designation No. PTA-4317.

BRIEF DESCRIPTION OF DRAWINGS

FIG. 1 depicts the lineage of S26.

FIG. 2 depicts a comparison of the percent of seed retention during in shaker shatter resistance testing from 1997 to 2001 for sesame varieties released by Sesaco: Sesaco 01 (S01) released in 1982, Sesaco 02 (SO2) released in 1983-1987, Sesaco 03 (SO3) released in 1985-1986, Sesaco 04 (SO4) released in 1984-1987, Sesaco 05 (SO5) released in 1984, Sesaco 06 (SO6) released in 1984, Sesaco 07 (S07) released in 1985-1988, Sesaco 08 (S08) released in 1986, Sesaco 09 (S09) released in 1985-1986, Sesaco 10 (S10) released in 1988-1991, Sesaco 11 (S11) released in 1988-1995, Sesaco 12 (S12) released in 1986-1987, Sesaco 14 (S14) released in 1989, Sesaco 15 (S15) released in 1990-1991, Sesaco 16 (S16) released in 1991-1996, Sesaco 17 (S17) released in 1993-1998, Sesaco 18 (S18) released in 1994-1996, Sesaco 19 (S19) released in 1994-1995, Sesaco 20 (S20) released in 1995-1997, Sesaco 21 (S21) released in 1995-1998, Sesaco 22 (S22) released in 1997-1998, Sesaco 23 (S23) released in 1998-2000, Sesaco 24 (S24) released in 1998-2002, Sesaco 25 (S25) released in 2001-2002, and Sesaco 26 (S26) released in 2002.

FIG. 3 depicts a comparison of the kill resistance ratings in Uvalde, Tex., in 2001 for the varieties released by Sesaco.

FIG. 4 depicts a comparison of the mean days to physiological maturity from 1998 to 2001 for the varieties released by Sesaco.

FIG. 5 depicts a comparison of the mean weight of 100 seeds in grams from 1997 to 2001 for the varieties released by Sesaco.

FIG. 6 depicts a comparison of the mean resistance to drought in San Angelo, Tex., in 2000 for the varieties released by Sesaco.

DETAILED DESCRIPTION

Sesame cultivar S26 (hereinafter “S26”) is a non-dehiscent sesame variety having superior characteristics which make it a commercially suitable sesame line. S26 exhibits non-dehiscence as defined in U.S. Pat. No. 6,100,452, the teachings of which are incorporated herein by reference, making it suitable for mechanized harvesting. In addition, S26 has more drought resistance which extends the planting region to areas with less rainfall, larger seed size which is desirable for processors, comparable shatter resistance, and improved resistance against common fungal diseases. With later maturity, S26 is more restricted on geographical range than the present varieties.

The recommended geographical area for S26 is from South Texas at the Rio Grande to central Oklahoma and from east Texas westward to elevations below 1,000 meters. S26 has not been tested in other states, but it is projected that it would perform well in New Mexico, Arizona, and California. S26 has not been exposed to the sesame diseases that have been reported east of Texas.

Sesaco used the pedigree method of plant breeding to develop S26. Sesame is generally self-pollinated. Crossing is done using standard techniques as delineated in Yermanos, D. M. 1980. “Sesame. Hybridization of crop plants,” Am Soc Agronomy - Crop Sci of America, pp. 549-563 and U.S. Pat. No. 6,100,452. Ashri provides an overview of sesame breeding in Ashri, A. (1998). “Sesame breeding,” Plant Breed. Rev. 16:179-228. When Sesaco started the U.S. breeding program in 1978, there were no two lines with all of the desirable characters for mechanization of sesame. Development of new varieties has depended on building blocks of desirable characters and then bringing in other blocks of desirable characters.

The lineage of S26 is presented in FIG. 1. 111 (1) was a line obtained from the National Plant Germplasm System (NPGS) (PI173955) in 1979 and first planted by Sesaco in the Woods nursery (Wellton, Ariz.) in 1981. NPGS obtained it in 1949 from W. N. Koelz, United States Department of Agriculture (USDA), Beltsville, Md. who obtained it from India. Within Sesaco, 111 first carried the identifier 0858 and was then changed to X111. In 1985, a selection of this line became Sesaco 4 (SO4).

111X (2) was an outcross in the plot BT0458 in the Nickerson nursery (Yuma, Ariz.) in 1982. Within Sesaco, it carried the identifier E0745.

F820 (3) was a cross made by Sesaco in the Nickerson nursery (Yuma, Ariz.) in 1982. Within Sesaco, it carried the identifier F820.

104 (4) was a line obtained from the Sesamum Foundation (D. G. Langham, Fallbrook, Calif.) in 1977 and first planted in the Kamman nursery (Wellton, Ariz.) in 1978. It was obtained with the designator SF084. The Sesamum Foundation obtained it from Maximo Rodriguez in 1961. He had collected it from Mexico where it was known as Instituto 8. Instituto 8 was a selection from G53.48, a cross made by D. G. Langham in 1953 in Guacara, Venezuela. Within Sesaco, 104 carried the identifier 0084. In 1982, a selection of this line became Sesaco 2 (SO2).

578 (5) was a cross made by Sesaco in the McElhaney nursery (Wellton, Ariz.) in 1983. Within Sesaco, it carried the identifier G8578 and then changed to T578.

F853 (6) was a cross made by Sesaco in the Nickerson nursery (Yuma, Ariz.) in 1982. Within Sesaco, it carried the identifier F853.

192 (7) was a line obtained from the M. L. Kinman in 1980 and first planted by Sesaco in the Woods nursery (Wellton, Ariz.) in 1981. The line was originally T61429-B-4-1-3 from the Kinman USDA sesame program, College Station, Tex., which had been in cold storage at Ft. Collins, Colo. In 1997, the line was transferred to the NPGS, Griffin, Ga. and given the identifier P1599462. Within Sesaco, 192 first carried the identifier 1479 and then was changed to X191 and X193. In 1985, a selection from X193 became Sesaco 3 (SO3) and a selection of X191 became Sesaco 7 (S07).

031 (8) was a cross made by Sesaco in the Ramsey nursery (Roll, Ariz.) in 1984. Within Sesaco, it carried the identifier H0031 and then changed to T031.

118 (9) was a line obtained from the NGPS (PI425944) in 1979 and first planted in Kamman nursery (Wellton, Ariz.) in 1979. The NGPS obtained it in 1978 from P. F. Knowles, University of California, Davis, Calif., who collected it in Pakistan. Within Sesaco, it carried the identifier 1118 and then changed to X118 and then to T118.

B1954 (10) was a cross made by Sesaco in the Gilleland nursery (Uvalde, Tex.) in 1993. Within Sesaco, it carried the identifier B1954.

72C (11) was a line obtained from the NGPS (PI292146) in 1979 and first planted in Woods nursery (Wellton, Ariz.) in 1981. The NGPS obtained it in 1963 from Hybritech Seed International, a unit of Monsanto, U.S., which obtained it from Israel. In viewing this material in 1986, A. Ashri of Israel concluded that it was an introduction to Israel. The material is similar to introductions from the Indian subcontinent. Within Sesaco, it has carried the identifier 0702 and then changed to X702 and then to X702C. In 1986, a selection from X702C became Sesaco 12 (S12).

L6651 (12) was a cross made by Sesaco in the Wright nursery (Roll, Ariz.) in 1987. Within Sesaco, it carried the identifier L6651.

G8 (13) was a line obtained from D. G. Langham in 1977 and first planted by Sesaco in the Kamman nursery (Wellton, Ariz.) in 1978. It was a selection from the cultivar ‘Guacara’ which D. G. Langham developed in Venezuela in the 1950s. Guacara was an initial selection from a cross that later produced one of the major varieties in Venezuela—Aceitera. Within Sesaco, G8 first carried the identifier X011 and was later changed to TG8.

804 (14) was a cross made by Sesaco in the Nickerson nursery (Yuma, Ariz.) in 1982. Within Sesaco, it has carried the identifier F804; in 1988, a selection of this line became Sesaco 11 (S11).

2CA (15) was a cross made by Sesaco in the Wright nursery (Roll, Ariz.) in 1988. Within Sesaco, it has carried the identifier LCX02 and later changed to X2CA and then to T2CA.

S11 (16) was a cross made by Sesaco in the Nickerson nursery (Yuma, Ariz.) in 1982. Within Sesaco, it carried the identifier F804. In 1988, a selection of this line became Sesaco 11 (S11).

SOMALIA (17) was a line obtained from the NGPS (PI210687) in 1979 and first planted in Kamman nursery (Wellton, Ariz.) in 1979. The NGPS obtained it from the Administrazione Fiduciaria Italiana della Somalia, Mogadishu, Somalia. Within Sesaco, it carried the identifier 0730.

H6778 (18) was a cross made by Sesaco in the Hancock nursery (Wellton, Ariz.) in 1984. Within Sesaco, it carried the identifier H6778.

J3208 (19) was a cross made by Sesaco in the Hancock nursery (Wellton, Ariz.) in 1985. Within Sesaco, it carried the identifier J3208.

193 (20) was a selection from 192 (7) described above. Within Sesaco, it carried the identifier X193. In 1985, a selection of X193 became Sesaco 03 (S03).

H6432 (21) was a cross made by Sesaco in the Hancock nursery (Wellton, Ariz.) in 1984. Within Sesaco, it carried the identifier H6432.

MAX (22) was a line obtained from the Sesamum Foundation (D. G. Langham, Fallbrook, Calif.) in 1977 and first planted in the Kamman nursery (Wellton, Ariz.) in 1978. The Sesamum Foundation obtained it from Maximo Rodriguez in 1961. He had collected it from Mexico where it was known as Instituto Regional Canasta. Within Sesaco, it carried the identifier 0116 and then changed to TMAX.

076 (23) was a cross made by Sesaco in the Kamman nursery (Wellton, Ariz.) in 1979. Within Sesaco, it carried the identifier C076 and then changed to T076.

R234 (24) was a named variety obtained from D. M. Yermanos in 1978 from his sesame program at the University of California at Riverside. It was first planted in the Kamman nursery (Wellton, Ariz.) in 1978. Within Sesaco, it carried the identifier 0544 and then changed to T234.

R234 TALL (25) was an outcross found in the Kamman nursery (Wellton, Ariz.) in 1979. Within Sesaco, it carried the identifier X026.

K3255 (26) was a cross made by Sesaco in the Hancock nursery (Wellton, Ariz.) in 1986. Within Sesaco, it carried the identifier K3255.

045 (27) was a cross made by Sesaco in the Kamman nursery (Wellton, Ariz.) in 1978. Within Sesaco, it carried the identifier B045 and then changed to T045.

G958-1 (28) was a line obtained from the Sesamum Foundation in 1977 and first planted in the Kamman nursery (Wellton, Ariz.) in 1978. It was obtained with a designator of SF411. The Sesamum Foundation obtained it from John Martin in 1962 who had obtained it from the D. G. Langham breeding program in Venezuela. Within Sesaco, G958-1 carried the identifier 0411.

H6785 (29) was a cross made by Sesaco in the Hancock nursery (Wellton, Ariz.) in 1984. Within Sesaco, it carried the identifier H6785.

982 (30) was a line obtained from the Sesamum Foundation in 1977 and first planted in the Kamman nursery (Wellton, Ariz.) in 1978. It was obtained with a designator of SF477 and was named G53.98-2. The Sesamum Foundation obtained it from John Martin in 1962 who had obtained it from the D. G. Langham breeding program in Venezuela. G53.98-2 was a cross made by D. G. Langham in 1953 in Guacara, Venezuela. Within Sesaco, 982 carried the identifier 0477 and then changed to T982.

036 (31) was a cross made by Sesaco in the Kamman nursery (Wellton, Ariz.) in 1979. Within Sesaco, it carried the identifier CO36 and then X036. In 1984, a selection from X036 became Sesaco 6 (SO6).

G53.80-1 (32) was a line obtained from the Sesamum Foundation in 1977 and first planted in the Kamman nursery (Wellton, Ariz.) in 1978. It was obtained with a designator of SF471. The Sesamum Foundation obtained it from John Martin in 1962 who had obtained it from the D. G. Langham breeding program in Venezuela. G53.80-1 was a cross made by D. G. Langham in 1953 in Guacara, Venezuela. Within Sesaco, G53.80-1 carried the identifier 0471.

J3222 (33) was a cross made by Sesaco in the Hancock nursery (Wellton, Ariz.) in 1985. Within Sesaco, it carried the identifier J3222.

195 (34) was an outcross selected in plot MN4584 in the McElhaney nursery (Wellton, Ariz.) in 1983. Within Sesaco, it carried the identifier E0690 and then changed to X195.

H6562 (35) was a cross made by Sesaco in the Hancock nursery (Wellton, Ariz.) in 1984. Within Sesaco, it carried the identifier H6562.

701 (36) was a line obtained from the NGPS (PI292145) in 1979 and first planted in Woods nursery (Wellton, Ariz.) in 1981. The NGPS obtained it in 1963 from Hybritech Seed International, a unit of Monsanto, U.S., which obtained it from Israel. In viewing this material in 1986, A. Ashri of Israel concluded that it was an introduction to Israel. The material is similar to introductions from the Indian subcontinent. Within Sesaco, it carried the identifier 0701 and then changed to X701. In 1984, a selection from X701 became Sesaco 5 (SO5).

S16 (37) was a cross made by Sesaco in the Wright nursery (Roll, Ariz.) in 1987. Within Sesaco, it carried the identifier KAP11 and then changed to XFXA. In 1991, a selection from XFXA became Sesaco 16 (S16).

S26 (38) was a cross made by Sesaco in the Friesenhahn nursery (Knippa, Tex.) in 1994. The original designator was CM764. The seed (M764) from the cross was planted in plot E082 in the Friesenhahn nursery (Knippa, Tex.) in 1995. Four plants were selected based on “031 genes, a good phenotype, and good kill resistance.” The seed (2717) from one of the plants was planted in plot 2067 in the Gilleland nursery (Uvalde, Tex.) in 1996. Six plants were selected based on “good low height of the first capsule and producing a wide row.” The seed (1375) from one of the plants was planted in plot 4677 in the Gilleland nursery (Uvalde, Tex.) in 1997. Nineteen plants were selected based on “good kill resistance, wide row, lot of capsules in the row, light seeking ability, and bottom regrowth.” The identifier was changed to X13J. The seed (3240) from one of the plants was planted in plot 0213 in the Gilleland nursery (Uvalde, Tex.) in 1998. Five plants were selected based on “good branches, lot of capsules, wide row, and capability of growing on 101 cm rows.” The seed (2838) from one of the plants was planted in plot F211 in the Meeks nursery (Tipton, Okla.) in 1999. A bulk of 22 plants was selected based on “a prayer leaf, very wide row, lot of capsules plus, and the turn-off gene.” The bulk seed (7635) was planted in a strip (VE17) next to the Schwartz nursery (Wall, Tex.) in 2000. The strip was combined. The combined seed was tested on two farms: the Schwartz farm (Wall, Tex.) and Michalewicz farm (Water Valley, Tex.) in 2001, and the seed combined. The combined seed was released to farmers in May, 2002.

Along with breeding programs, tissue culture of sesame is currently being practiced in Korea, Japan, Sri Lanka and the United States. It is possible for one of ordinary skill in the art to utilize sesame plants grown from tissue culture as parental lines in the production of non-dehiscent sesame. Further, it is possible to propagate non-dehiscent sesame through tissue culture methods. By means well known in the art, sesame plants can be regenerated from tissue culture having all the physiological and morphological characteristics of the source plant.

The present invention includes the seed deposited under ATCC Patent Deposit Designation No. PTA-4317; a plant, designated as S26, or parts thereof which are produced by the seed deposited under ATCC Patent Deposit Designation No. PTA-4317; seed produced by plant S26 or its progeny having the physiological and morphological characteristics of sesame plant S26 or a plant produced by the seed deposited under ATCC Patent Deposit Designation No. PTA-4317; any plant having plant S26 as a parent, and any plant having the physiological and morphological characteristics of sesame plant S26 or a plant produced by the seed deposited under ATCC Patent Deposit Designation No. PTA-4317. The present invention also includes a tissue culture of seed having been deposited under ATCC Patent Deposit Designation No. PTA-4317 or a tissue culture of sesame plant S26 or its parts, a sample of the seed of sesame plant S26 having been deposited under ATCC Patent Deposit Designation No. PTA-4317. A sesame plant regenerated from a tissue culture of a seed having been deposited under ATCC Patent Deposit Designation No. PTA-4317 or from sesame plant S26, wherein the regenerated sesame plant has all the physiological and morphological characteristics of a sesame plant produced by the seed deposited under ATCC Patent Deposit Designation No. PTA-4317 is also contemplated by the present invention. Methods of producing sesame seed, comprising crossing a first parent sesame plant with a second parent sesame plant, wherein the first or second parent sesame plant was produced by seed having been deposited under ATCC Patent Deposit Designation No. PTA-4317 are part of the present invention.

Unless otherwise stated, as used herein, the term plant includes plant cells, plant protoplasts, plant cell tissue cultures from which sesame plants can be regenerated, plant calli, plant clumps, plant cells that are intact in plants, or parts of plants, such as embryos, pollen, ovules, flowers, capsules, stems, leaves, seeds, roots, root tips, and the like. Further, unless otherwise stated, as used herein, the term progeny includes plants derived from plant cells, plant protoplasts, plant cell tissue cultures from which sesame plants can be regenerated, plant calli, plant clumps, plant cells that are intact in plants, or parts of plants, such as embryos, pollen, ovules, flowers, capsules, stems, leaves, seeds, roots, root tips, and the like.

Sesame cultivar S26 has been extensively grown in the following three nurseries:

(1) Uvalde nursery planted north of Uvalde, Tex. (latitude 29°22′ north, longitude 99°47′ west, 226 m elev) in middle to late May from 1988-2001; mean rainfall is 608 mm annually with a mean of 253 mm during the growing season; temperatures range from an average low of 3° C. and an average high of 17° C. in January to an average low of 22° C. and an average high of 37° C. in July. The nursery was planted on 96 cm beds from 1988 to 1997 and on 76 cm beds from 1998 to 2001. The nursery was pre-irrigated and has had 2-3 post-plant irrigations depending on rainfall. The fertility has varied from 30-60 units of nitrogen.

(2) San Angelo nursery planted east of San Angelo, Tex. (latitude 31°21′ north, longitude 100°30′ west, 908 m elev) in early to middle June from 1992-2001; mean rainfall is 490 mm annually with a mean of 201 mm during the growing season; temperatures range from an average low of 0° C. and an average high of 15° C. in January to an average low of 22° C. and an average high of 36° C. in July. The nursery was planted on 101 cm beds. The nursery was pre-irrigated in years when there was no planting rain and has had 0 to 1 post-plant irrigations depending on rainfall. The fertility has varied from 20-50 units of nitrogen.

(3) Oklahoma nursery planted north of Tipton, Okla. (latitude 34°28′ north, longitude 99°10′ west, 380 m elev) from middle June to early July from 1998-2001; mean rainfall is 630 mm annually with a mean of 251 mm during the growing season; average daily temperatures range from an average low of −3° C. and an average high of 9° C. in January and an average low of 23° C. low and an average high of 36° C. in July. The nursery was planted in the first two years on 101 cm beds and the last two on 91 cm beds. The nursery was pre-irrigated in years when there was no planting rain and has had 0 to 2 post-plant irrigations depending on rainfall. The fertility has varied from was 30-50 units of nitrogen.

Sesame cultivar S26 has shown uniformity and stability within the limits of environmental influence for the characters listed in Table I below. Table I provides the name, definition, and rating scale of each character as well as the method by which the character is measured. Under the rating section, the rating for S26 is presented in bold text. Additionally, the distribution of the character in Sesaco's sesame development program is indicated under the rating section. Sesaco uses slightly different character specifications from “Descriptors for sesame”, AGP:IBPGR/80/71, IBPGR Secretariat, Rome, (1981) and from the form “Sesame ( Sesamum indicum )”, U.S. Department of Agriculture Plant Variety Protection Office, Beltsville, Md. The descriptors in those documents were developed in the early 1980s and have not been updated to incorporate new concepts in sesame data collection.

TABLE I
Characters Distinguishing the S26 Line
Character	Rating	Methodology
(1) BRANCHING	Subjective rating	The amount of branching on any particular
STYLE	Values:	plant depends on the space around the plant. In
The potential amount of	U = Uniculm-no branching	high populations, branching can be suppressed.
true branching in a line	except weak branches in	This rating should be based on potential as
	open	expressed on end plants and plants in the open.
	B = True branches	True branches start in the leaf axil below
	S26 = B for all crops in all	the first flower, and they begin to emerge
	nurseries	before the first open flower. As long as there is
	Distribution within Sesaco	light into the leaf axils, there will be additional
	based on stable lines in the	branches that start below the first branches in
	crossing program in 1982-	subsequently lower nodes. Weak branches
	2001 (Total number of	occur when a plant is in the open. They
	samples tested = 1,333)	develop in the lowest nodes and subsequent
	U = 42.4%	branches start at higher nodes. There are lines
	B = 57.6%	that will not branch in any circumstance.
		Some lines in the open will put on
		spontaneous branches late in the cycle. True
		and weak branches do not have a capsule in the
		same leaf axil, whereas the spontaneous
		branches form under the capsule after the
		capsule has formed. Spontaneous branches are
		not counted as branches.
		There are rare lines where the flowering
		pattern is to put on flowers on lower nodes late
		in the cycle. In this case, the capsule is formed
		after the branch is developed. This pattern
		should not be termed spontaneous branching,
		and the branch is normally counted as a true
		branch.
		There are branched lines that have
		secondary branches on the branches. In a few
		cases, there can be tertiary branches.
		Additional branches generally appear in low
		populations.
		Comments: the effects of light appear to
		have more of an effect on branching than
		moisture and fertility. High populations
		suppress branching.
(2) NUMBER OF	Subjective rating	Rating can be taken from about 60 days
CAPSULES PER	Values:	after planting through to the end of the crop.
LEAF AXIL	1 = Single	Number of Capsules per Leaf Axil is highly
The predominant number	3 = Triple	dependent on moisture, fertility, and light. In
of capsules per leaf axil in	Based on potential as	triple capsule lines, the central capsule forms
the middle half of the	described in the methodol-	first, and axillary capsules follow a few days
capsule zone	ogy presented herein	later. Triple capsule lines have the potential to
	S26 = 1 for all crops in all	put on axillaries, but will not do so if plants do
	nurseries	not have adequate moisture and/or fertility. In
	Distribution within Sesaco	drought conditions, some triple capsule lines
	based on stable lines in the	will produce only a central capsule for many
	crossing program in 1982-	nodes. In these lines, when there is adequate
	2001 (Total number of	moisture through rain or irrigation, some will
	samples tested = 1,327)	add axillary capsules on only new nodes, while
	1 = 58.3%	others will add axillary capsules to all nodes.
	3 = 41.7%	Some triple capsule lines will not put on
		axillary capsules if there is no direct sunlight
		on the leaf axil. To date, lines with single
		capsules have nectaries next to the central
		capsule in the middle of the capsule zone while
		triple capsules do not. However, some lines
		have what appear to be nectaries on the lower
		capsules of triple lines, but upon close
		examination, they are buds which may or may
		not eventually develop into a flower and then a
		capsule. In most triple capsule lines, the lower
		and upper nodes have single capsules.
		There are some lines where the end plants
		can put on 5 capsules/leaf axil and a few that
		have the potential to put on 7 capsules/leaf axil.
		5 and 7 capsules only appear with open plants
		with high moisture and fertility. In some
		environments, single capsule lines will put on
		multiple capsules on 1 node and rarely on up to
		5 nodes. These lines are not considered triple
		capsule lines.
(3) MATURITY CLASS	Subjective rating	The basis for this data point is Days to
The maturity of a line in	Values:	Physiological Maturity (Character No. 27). S24
relation to a standard line.	V = Very early (<85 days)	is the standard line to be used to compute
Currently, the standard	E = Early (85-94 days)	Maturity Class. In 1998-2001, the maturity of
line is S24 at 95 days	M = Medium (95-104 days)	S24 averaged 95 days in the Uvalde, TX,
	L = Late (105-114 days)	nursery. For each line, the physiological
	T = Very late (>114 days)	maturity for each year is subtracted by the S24
	S26 = M in 1998-2001 in	maturity for that year in that nursery, and then
	Uvalde nursery a	the number of days of difference is averaged.
	Distribution within Sesaco	The average is then added to 95.
	based on stable lines in the	See Days to Physiological Maturity
	crossing program in 1998-	(Character No. 27) for the effects of the
	2001 (Total number of	environment on Maturity Class.
	samples tested = 650)
	V = 1.2%
	E = 26.8%
	M = 56.2%
	L = 12.9%
	T = 2.9%
(4) PLANT	Subjective rating	The first character is the Branching Style
PHENOTYPE	Values:	(Character No. 1), followed by the Number of
A three character	Branching Style	Capsules per Leaf Axil (Character No. 2), and
designation that provides	U = Uniculm-no branching	then the Maturity Class (Character No. 3).
the branching style,	except weak branches in	When these characters are placed in a
number of capsules per	open	matrix, there are 20 potential phenotypes. The
leaf axil, and the maturity	B = True branches	phenotype provides an overview of the general
class	Number of Capsules per Leaf	appearance of the plant. There is a very high
	Axil	correlation between Maturity Class and Height
	1 = Single	of Plant (Character No. 5).
	3 = Triple
	Maturity Class
	V = Very early (<85 days)
	E = Early (85-94 days)
	M = Medium (95-104 days)
	L = Late (105-114 days)
	T = Very late (>114 days)
	S26 = B1M for all crops in
	all nurseries
	Distribution within Sesaco
	based on stable lines in the
	crossing program in 1998-
	2001 (Total number of
	samples tested = 650)
	U1V = 0%	U3V = 1.1%
	U1E = 3.8%	U3E = 8.3%
	U1M = 16.0%	U3M = 12.0%
	U1L = 3.4%	U3L = 2.2%
	U1T = 0.5%	U3T = 0.6%
	B1V = 0%	B3V = 0.2%
	B1E = 8.0%	B3E = 6.3%
	B1M = 23.2%	B3M = 4.8%
	B1L = 6.5%	B3L = 1.0%
	B1T = 1.6%	B3T = 0.4%
(5) HEIGHT OF	Unit of measure: cm	The measurement is made after the plants
PLANT	Values: average of 3 plants	stop flowering. For plants that are not erect or
The height of the plant	S26 = 128 cm in 2000 in	have lodged, the plant should be picked up for
from the ground to the top	Uvalde nursery and 144 cm	the measurement. In most lines the highest
of the highest capsule	in 2001 in Uvalde nursery	capsule is on the main stem. In lines with the
with viable seed	Distribution within Sesaco	dt/dt alleles (determinate), the highest capsule
	based on stable lines in the	is on the branches.
	crossing program in 1999-	Comments: this height is dependent on the
	2001 (Total number of	amount of moisture, heat, fertility, and
	samples tested = 2274)	population. Increased values generally increase
	low = 56 cm	high = 249 cm	the height. In a high population, the height will
	1 = <94.6 cm; 5.2%	only increase if there is adequate fertility and
	2 = <133.2 cm; 34.6%	moisture; otherwise, the height will be shorter.
	3 = <171.8 cm; 54.9%	In low light intensities, the heights are
	4 = <210.4 cm; 5.1%	generally taller.
	5 = >210.3 cm; 0.1%
	avg. = 134.8 cm, std = 23.5
(6) HEIGHT OF FIRST	Unit of measure: cm	The measurement is made after the plants
CAPSULE	Values: average of 3 plants	stop flowering. For plants that are not erect or
The height of the first	S26 = 53 cm in 2000 in	have lodged, the plant should be picked up for
capsule from the ground	Uvalde nursery and 50 cm	the measurement. In most lines, the lowest
to the bottom of the	in 2001 in Uvalde nursery	capsule is on the main stem. True branches
lowest capsule on the	Distribution within Sesaco	have capsules higher than on the main stem
central stem	based on stable lines in the	except when the flowers fall off. Occasionally,
	crossing program in 1999-	on weak branches, the lowest capsule is on the
	2001 (Total number of	branches.
	samples tested = 2274)	There are lines that flower in the lower
	low = 20 cm	high = 193 cm	nodes late in the cycle, and, thus, the measure-
	1 = <54.6 cm; 52.7%	ment should be taken after flowering ends. In
	2 = <89.2 cm; 45.5%	many lines the first flower does not make a
	3 = <123.8 cm; 1.5%	capsule, and, thus, this height may not be the
	4 = <158.4 cm; 0.3%	same as the height of the first flower. The
	5 = >158.3 cm; 0.1%	height is correlated to the length of time to
	avg. = 54.2 cm, std = 14.3	flowering, the earlier the lower the height.
		Comments: see Height of Plant (Character
		No. 5) for effects of environmental factors
(7) CAPSULE ZONE	Unit of measure: cm	The measurement is derived by subtracting
LENGTH	Values: average of 3 plants	the Height of First Capsule (Character No. 6)
The length of the capsule	S26 = 75 cm in 2000 in	from the Height of Plant (Character No. 5).
zone. The capsule zone	Uvalde nursery and 94 cm	Comments: see Height of Plant (Character
extends from the bottom	in 2001 in Uvalde nursery	No. 5) for effects of environmental factors
of the lowest capsule on	Distribution within Sesaco
the main stem to the top	based on stable lines in the
of the highest capsule on	crossing program in 1999-
the main stem.	2001 (Total number of
	samples tested = 2274)
	low = 18 cm	high = 188 cm
	1 = <52 cm; 4.7%
	2 = <86 cm; 53.5%
	3 = <120 cm; 41.3%
	4 = <154 cm; 0.5%
	5 = >153.9 cm; 0.1%
	avg. = 80.6 cm, std = 17.2
(8) NUMBER OF	Unit of measure: number	The count is made after the plants stop
CAPSULE NODES	Values: average of 3 plants	flowering. On alternate arranged leaves, each
The number of capsule	S26 = 23 in 2000 in Uvalde	pair of leaves is counted as one node. In some
nodes from the lowest	nursery and 29 in 2001 in	lines, there are three leaves per node for at least
capsule node to the	Uvalde nursery	part of the plant. In some plants, flowers may
highest node with	Distribution within Sesaco	not have produced capsules on one or more of
capsules with viable seed	based on stable lines in the	the leaf axils in a node. These nodes should
on the main stem of the	crossing program in 1999-	still be counted. Nodes on the branches are not
plant	2001 (Total number of	counted.
	samples tested = 2154)	In years when the amount of moisture
	low = 10	high = 54	available to the plant is irregular, nodes can
	1 = <18.8; 17.9%	become very irregular, particularly on triple
	2 = <27.6; 48.3%	capsule lines. In the upper portions of the plant,
	3 = <36.4; 29.5%	it may become easier to count the capsule
	4 = <45.2; 3.6%	clusters and divide by 2. While it is possible to
	5 = >45.1; 0.7%	count nodes after leaves have fallen, it is much
	avg. = 25.3, std = 6.4	easier to count while the leaves are still on the
		plant.
		Comments: the number of nodes is
		dependent on the amount of moisture and
		fertility. Higher moisture and fertility increases
		the number of nodes.
(9) AVERAGE	Unit of measure: cm	Divide the Capsule Zone Length (Character
INTERNODE	Values: average of 3 plants	No. 7) by the Number of Capsule Nodes
LENGTH WITHIN	S26 = 3.3 cm in 2000 in	(Character No. 8).
CAPSULE ZONE	Uvalde nursery and 3.3 cm	Comments: this length is dependent on the
The average internode	in 2001 in Uvalde nursery	amount of moisture, fertility, and population.
length within the capsule	Distribution within Sesaco	Increased values generally increase the length.
zone	based on stable lines in the	In a high population, the length will only
	crossing program in 1999-	increase if there is adequate fertility and
	2001 (Total number of	moisture; otherwise the length will be shorter.
	samples tested = 2145)	In low light intensities, the lengths are
	low = 1.09 cm	generally longer.
	high = 8.09 cm	Past methodologies have measured the
	1 = <2.49 cm; 6.2%	internode length at the middle of the capsule
	2 = <3.89 cm; 74.6%	zone. Some have measured it at the median
	3 = <5.29 cm; 18.6%	node and others at the median Capsule Zone
	4 = <6.69 cm; 0.4%	Length.
	5 = >6.68 cm; 0.1%
	avg. = 3.35 cm, std = 0.66
(10) YIELD AT	Unit of measure: kg/ha	On 3 replicated plots, when the plants are
DRYDOWN	Values: average of 3	dry enough for direct harvest, cut a minimum
An extrapolation of the	replications	of 1/5000 of a hectare (Sesaco uses 1/2620) in
yield of a field by taking	S26 = 1421 kg/ha in 2000 in	the plot and place the plants in a cloth bag.
sample yields	Uvalde nursery; 1696 kg/ha	Thresh the sample in a plot thresher and weigh
	in 2001 in Uvalde nursery;	the seed. Multiply the weight by the
	390 kg/ha in 2000 in San	appropriate multiplier based on area taken to
	Angelo nursery b ; and 1611	provide the extrapolated yield in kg/ha.
	kg/ha in 2001 in San Angelo	In the Almaco thresher there is about 3%
	nursery	trash left in the seed. Since yields are compara-
	Distribution within Sesaco	tive, there is no cleaning of the seed done
	based on stable lines in the	before the computation. If other threshers have
	crossing program in 1999-	more trash, the seed should be cleaned before
	2001 (Total number of	weighing.
	samples tested = 1828)	Comments: yields increase with moisture
	low = 67 kg/ha	and fertility. However, too high a moisture can
	high = 2421 kg/ha	lead to killing of plants. Too high fertility can
	1 = <537.8 kg/ha; 5.6%	lead to extra vegetative growth that may not
	2 = <1008.6 kg/ha; 15.6%	lead to higher yields. The optimum population
	3 = <1479.4 kg/ha; 51.5%	depends on the phenotype (Branching Style,
	4 = <1950.2 kg/ha; 25.8%	Character No. 1; Number of Capsules per Leaf
	5 = >1950.1 kg/ha; 1.4%	Axil, Character No. 2; and Maturity Class,
	avg. = 1114.6 kg/ha,	Character No. 3) and row width.
	std = 331.2
(11) RESISTANCE TO	Subjective rating	In a year when there is a drought, this rating
DROUGHT	Values: 0 to 8 scale	can be used to differentiate the effects of the
The relative amount of	7 = Little effect from drought	different lines. This is a highly subjective
resistance to drought	4 = Medium effect from	rating requiring a rater that is familiar with the
	drought	performance of the line under normal
	1 = Considerable effect from	conditions. The rating is based on how the
	drought	drought changes the line from normal. Thus, a
	Intermediate values are used.	short line that does not change significantly in
	S26 = 6.4 in 2000 in San	a drought may have a higher rating than a tall
	Angelo nursery	line which is affected by the drought even
	Distribution within Sesaco	though the taller line is taller in the drought
	based on stable lines in the	than the short line.
	crossing program in 2000
	(Total number of samples
	tested = 632)
	low = 0	high = 8
	1 = <1.6; 0.8%
	2 = <3.2; 28.0%
	3 = <4.8; 36.1%
	4 = <6.4; 34.5%
	5 = >6.3; 0.6%
	avg. = 4.1, std = 1.2
(12) LEAF LENGTH	Unit of measure: cm	Select one leaf per node to measure from
The length of the leaf	Values: average of 3 plants	the 5 th , 10 th , and 15 th nodes from the base of
blade from the base of the	S26 = 30.4 cm for 5 th node	the plant. All the leaves for one line should be
petiole to the apex of the	in 2001 in San Angelo	collected at the same time. Some lines retain
leaf from the 5 th , 10 th , and	nursery; 20.1 cm for 10 th	the cotyledons, and the cotyledon node does
15 th nodes	node in 2001 in San Angelo	not count as a node. In some lines the lowest
	nursery; and 18.6 cm for	leaves abscise leaving a scar on the stem.
	15 th node in 2001 in San	Abscised nodes should be counted. In lines
	Angelo nursery	with alternate leaves, one node is counted for
	Distribution within Sesaco	each pair of leaves. In some lines in parts of the
	for 5 th leaf based on stable	plant there are three leaves per node which
	lines in the crossing program	should be counted as one node.
	in 2001 (Total number of	The leaves continue growing in the first few
	samples tested = 100)	days after they have separated from the
	low = 15.9 cm	growing tip. The choosing of leaves should be
	high = 55.5 cm	done a minimum of 5 days after the 15 th node
	1 = <23.8 cm; 41%	has appeared. Timing is important, because the
	2 = <31.7 cm; 44%	plants will begin to shed their lower leaves
	3 = <39.7 cm; 12%	towards the end of their cycle.
	4 = <47.6 cm; 1%	There are lines that have less than 15 nodes.
	5 = >47.5 cm; 2%	In this case, the highest node should be taken
	avg. = 26.1 cm, std = 6.8	and the node number annotated to the
	Distribution within Sesaco	measurements.
	for 10 th leaf based on stable	There can be as much as 6 mm difference
	lines in the crossing program	between a green leaf and a dry leaf. The
	in 2001 (Total number of	measurements can be done on a green or dry
	samples tested = 100)	leaf as long as any comparison data with other
	low = 12.0 cm	lines is based on the same method.
	high = 53.5 cm	Generally, the lowest leaves increase in size
	1 = <20.3 cm; 48%	until the 4 th to 6 th node and then they decrease
	2 = <28.6 cm; 40%	in size. This applies to all measurements (Leaf
	3 = <36.9 cm; 8%	Length (Character No. 12), Leaf Blade Length
	4 = <45.2 cm; 3%	Character No. 13), Leaf Blade Width
	5 = >45.1 cm; 1%	(Character No. 14), and Petiole Length
	avg. = 21.9 cm, std = 6.7	(Character No. 15). Generally, the width will
	Distribution within Sesaco	decrease at a greater rate than the length.
	for 15 th leaf based on stable	Comments: the length is dependent on the
	lines in the crossing program	amount of moisture and fertility. Higher
	in 2001 (Total number of	moisture and fertility increase the length. Leaf
	samples tested = 59)	size also appears to be affected by light
	low = 10.0 cm	intensity. In Korea, the Korean lines have
	high = 49.5 cm	much larger leaves than in Oklahoma. In
	1 = <17.9 cm; 54.2%	Korea, there is more cloud cover and a general
	2 = <25.8 cm; 37.3%	haze than in Oklahoma.
	3 = <33.7 cm; 6.8%	The largest leaves are on photosensitive
	4 = <41.6 cm; 0%	lines which when planted in the tropics fall into
	5 = >41.5 cm; 1.7%	the 2 nd and 3 rd class
	avg. = 18.6 cm, std = 6.1
(13) LEAF BLADE	Unit of measure: cm	See Leaf Length (Character No. 12) on how
LENGTH	Values: average of 3 plants	to collect leaves. The measurement does not
The length of the leaf	S26 = 17.1 cm for 5 th node	include Petiole Length (Character No. 15). In
blade from the base of the	in 2001 in San Angelo	some leaves the blade on one side of the petiole
leaf blade to the apex of	nursery; 14.1 cm for 10 th	starts before the other side. This measure
the leaf from the 5 th , 10 th ,	node in 2001 in San Angelo	should start from the lowest blade side. There
and 15 th nodes	nursery; and 14.4 cm for	are leaves that have enations where a blade
	15 th node in 2001 in San	starts and then stops. The enations are not
	Angelo nursery	considered part of the leaf blade because they
	Distribution within Sesaco	are very irregular from plant to plant and
	for 5 th leaf based on stable	within a plant.
	lines in the crossing program	Comments: see Leaf Length (Character No.
	in 2001 (Total number of	12) for effects of environment
	samples tested = 100)	The largest leaves are on photosensitive
	low = 10.0 cm	lines which when planted in the tropics fall into
	high = 31.0 cm	the 2 nd and 3 rd class
	1 = <14.2 cm; 30%
	2 = <18.4 cm; 43%
	3 = <22.6 cm; 22%
	4 = <26.8 cm; 2%
	5 = >26.7 cm; 3%
	avg. = 16.4 cm, std = 3.7
	Distribution within Sesaco
	for 10 th leaf based on stable
	lines in the crossing program
	in 2001 (Total number of
	samples tested = 100)
	low = 9.8 cm
	high = 30.1 cm
	1 = <13.9 cm; 30%
	2 = <17.9 cm; 43%
	3 = <22.0 cm; 19%
	4 = <26.0 cm; 6%
	5 = >25.9 cm; 2%
	avg. = 16.1 cm, std = 3.9
	Distribution within Sesaco
	for 15 th leaf based on stable
	lines in the crossing program
	in 2001 (Total number of
	samples tested = 59)
	low = 8.5 cm
	high = 27.5 cm
	1 = <12.3 cm; 28.8%
	2 = <16.1 cm; 42.4%
	3 = <19.9 cm; 20.3%
	4 = <23.7 cm; 5.1%
	5 = >23.6 cm; 3.4%
	avg. = 14.7 cm, std = 3.7
(14) LEAF BLADE	Unit of measure: cm	See Leaf Length (Character No. 12) on how
WIDTH	Values: average of 3 plants	to collect leaves. There are many leaves that
The width of the leaf	S26 = 19.5 cm for 5 th node	are not symmetrical with lobbing on one side
blade measured across the	in 2001 in San Angelo	and not the other. The width should still be
leaf blade at the widest	nursery; 6.5 cm for 10 th	measured across the widest point on a line
point at the 5 th , 10 th , and	node in 2001 in San Angelo	perpendicular to the main vein of the leaf.
15 th nodes	nursery; and 3.2 cm for 15 th	On some lines the width exceeds the length,
	node in 2001 in San Angelo	particularly on lobed leaves.
	nursery	Comments: see Leaf Length (Character No.
	Distribution within Sesaco	12) for effects of environment
	for 5 th leaf based on stable	The largest leaves are on photosensitive
	lines in the crossing program	lines which when planted in the tropics fall into
	in 2001 (Total number of	the 2 nd and 3 rd class. The widest leaves are
	samples tested = 100)	lobed. Normally, the leaves have turned from
	low = 2.3 cm	lobed to lanceolate by the 10 th leaf with the
	high = 46.0 cm	exception of the tropical lines.
	1 = <11.0 cm; 52%
	2 = <19.8 cm; 36%
	3 = <28.5 cm; 10%
	4 = <37.3 cm; 1%
	5 = >37.4 cm; 1%
	avg. = 12.3 cm, std = 6.5
	Distribution within Sesaco
	for 10 th leaf based on stable
	lines in the crossing program
	in 2001 (Total number of
	samples tested = 100)
	low = 1.8 cm
	high = 37.0 cm
	1 = <8.8 cm; 91%
	2 = <15.5 cm; 6%
	3 = <22.9 cm; 1%
	4 = <29.9 cm; 1%
	5 = >29.8 cm; 1%
	avg. = 5.5 cm, std = 4.7
	Distribution within Sesaco
	for 15 th leaf based on stable
	lines in the crossing program
	in 2001 (Total number of
	samples tested = 59)
	low = 1.2 cm	high = 33.0 cm
	1 = <7.6 cm; 94.9%
	2 = <13.9 cm; 3.4%
	3 = <20.3 cm; 0%
	4 = <26.6 cm; 0%
	5 = >26.5 cm; 1.7%
	avg. = 3.6 cm, std = 4.1
(15) PETIOLE	Unit of measure: cm	See Leaf Blade Length (Character No. 13)
LENGTH	Values: average of 3 plants	on how to collect leaves. In some leaves, the
The length of the petiole	S26 = 13.2 cm for 5 th node	blade on one side of the petiole starts before
from the base of the	in 2001 in San Angelo	the other side. This measure should end where
petiole to the start of the	nursery; 6.0 cm for 10 th	the earliest blade starts. There are leaves that
leaf blade at the 5 th , 10 th ,	node in 2001 in San Angelo	have enations where a blade starts and then
and 15 th nodes	nursery; 4.2 cm for 15 th	stops. The enations are not considered part of
	node in 2001 in San Angelo	the leaf blade because they are very irregular
	nursery	from plant to plant and within a plant and
	Distribution within Sesaco	should be measured as part of the petiole.
	for 5 th leaf based on stable	Comments: see Leaf Length (Character No.
	lines in the crossing program	12) for effects of environment
	in 2001 (Total number of	The largest leaves are on photosensitive
	samples tested = 100)	lines which when planted in the tropics fall into
	low = 3.7 cm	the 2 nd and 3 rd class
	high = 27.5 cm
	1 = <8.4 cm; 40%
	2 = <13.2 cm; 47%
	3 = <18.0 cm; 10%
	4 = <22.7 cm; 2%
	5 = >22.6 cm; 1%
	avg. = 9.7 cm, std = 3.6
	Distribution within Sesaco
	for 10 th leaf based on stable
	lines in the crossing program
	in 2001 (Total number of
	samples tested = 100)
	low = 1.4 cm
	high = 28.5 cm
	1 = <6.8 cm; 77%
	2 = <12.2 cm; 20%
	3 = <17.7 cm; 1%
	4 = <23.1 cm; 1%
	5 = >23.0 cm; 1%
	avg. = 5.7 cm, std = 3.4
	Distribution within Sesaco
	for 15 th leaf based on stable
	lines in the crossing program
	in 2001 (Total number of
	samples tested = 59)
	low = 1.4 cm
	high = 20.0 cm
	1 = <5.1 cm; 83.1%
	2 = <8.8 cm; 13.6%
	3 = <12.6 cm; 1.7%
	4 = <16.3 cm; 0%
	5 = >16.2 cm; 1.7%
	avg. = 4.0 cm, std = 2.8
(16) NUMBER OF	Unit of measure: Actual	The rating can be taken from about 60 days
CARPELS PER	number	after planting to all the way to the end of the
CAPSULE	Values:	crop.
The predominant number	2 = bicarpellate	There are many plants with mixed number
of carpels per capsule in	3 = tricarpellate	of carpels as follows:
the middle half of the	4 = quadricarpellate	1. Some bicarpellate plants will have one or
capsule zone	S26 = 2 for all crops in all	more nodes near the center of the capsule zone
	nurseries	that have tri- and/or quadricarpellate capsules
	Distribution within Sesaco	and vice versa.
	based on the introductions	2. Most tri- and quadri-carpellate plants will
	received in 1982-2001	begin and end with bicarpellate nodes.
	(Total number of samples	3. Some plants have only one carpel that
	tested = 2702)	develops. These capsules are generally bent,
	2 = 97.6%	but on examination the 2 nd carpel can be seen.
	3 = 0.0004%	4. On all types, flowers may coalesce and
	4 = 2.3%	double or triple the number of carpels.
	Sesaco has not developed
	lines with more than 2
	carpels.
(17) CAPSULE	Unit of measure: cm	After the plants are physiologically mature,
LENGTH FROM	Values: taken on the median	take 2 capsules from five plants from the
10cap TEST	capsule in a 10 capsule	middle of the capsule zone. On three capsule
The length of the capsule	sample	per leaf axil lines, one central capsule and one
from the bottom of the	S26 = 2.2 cm in 2000 in	axillary capsule should be taken from the same
seed chamber to the top of	Uvalde nursery; and 2.3 cm	leaf axil. The measurement is taken on the
the seed chamber from the	in 2001 in Uvalde nursery	median capsule of single capsule lines and on
outside of the capsule.	Distribution within Sesaco	the median central capsule on three capsule
The tip of the capsule is	based on 10cap test in all	lines. The measurement is taken on dry
not included in the	nurseries in 1997-2001	capsules because the length can shorten as
measurement.	(Total number of samples	much as one mm on drydown.
	tested = 3145)	The 10 capsules can be sampled from
	low = 1.3 cm	physiological maturity through complete
	high = 4.5 cm	drydown without an effect on this character.
	1 = <1.94 cm; 3.6%	Generally, the capsules in the middle of the
	2 = <2.58 cm; 67.4%	capsule zone are the longest on the plant.
	3 = <3.22 cm; 27.1%	Comments: the length of the capsule is
	4 = <3.86 cm; 1.7%	dependent on the amount of moisture, fertility,
	5 = >3.85 cm; 0.3%	and population. Higher moisture and fertility
	avg. = 2.42 cm, std = 0.34	increase the length. Higher population
		decreases the length even with adequate
		moisture/fertility.
(18) SEED WEIGHT	Unit of measure: grams	See Capsule Length from 10cap Test
PER CAPSULE	Values: average of 10	(Character No. 17) for collection of capsules.
FROM 10cap TEST	capsules	The capsules should be dried, the seed threshed
The weight of the seed in	S26 = 0.216 g in 2000 in	out, and the seed weighed.
a capsule from the center	Uvalde nursery; and 0.252 g	The 10 capsules can be sampled from
of the capsule zone	in 2001 in Uvalde nursery	physiological maturity through complete
	Distribution within Sesaco	drydown without an effect on this character.
	based on 10cap test in all	After drydown, only capsules with all their
	nurseries in 1997-2001	seed are taken. Thus, this test cannot be done
	(Total number of samples	on shattering lines after drydown.
	tested = 3208)	Generally, the capsules in the middle of the
	low = 0.053 g	capsule zone have the highest seed weight per
	high = 0.476 g	capsule on the plant.
	1 = <0.138 g; 2.7%	Comments: see Capsule Length from 10cap
	2 = <0.222 g; 51.1%	Test (Character No. 17) for the effects of
	3 = <0.307 g; 44.9%	environmental factors.
	4 = <0.391 g; 1.2%
	5 = >0.390 g; 0.1%
	avg. = 0.216 g, std = 0.043
(19) CAPSULE	Unit of measure: grams	See Capsule Length from 10cap Test
WEIGHT PER	Values: average of 10	(Character No. 17) for collection of capsules.
CAPSULE FROM	capsules	The capsules should be dried, the seed threshed
10cap TEST	S26 = 0.113 g in 2000 in	out, and the capsules weighed.
The weight of the capsule	Uvalde nursery; and 0.169 g	The 10 capsules can be sampled from
from the center of the	in 2001 in Uvalde nursery	physiological maturity through complete
capsule zone after the	Distribution within Sesaco	drydown without an effect on this character.
seed has been removed	based on 10cap test in all	Generally, the capsules in the middle of the
	nurseries in 1997-2001	capsule zone have the highest capsule weight
	(Total number of samples	per capsule on the plant.
	tested = 3207)	Comments: see Capsule Length from 10cap
	low = 0.059 g	Test (Character No. 17) for the effects of
	high = 0.395 g	environmental factors.
	1 = <0.126 g; 28.2%
	2 = <0.193 g; 61.6%
	3 = <0.261 g; 9.0%
	4 = <0.328 g; 0.8%
	5 = >0.327 g; 0.3%
	avg. = 0.149 g, std = 0.038
(20) CAPSULE	Unit of measure: grams	The weight is derived by dividing the
WEIGHT PER CM	Values: average of 10	Capsule Weight per Capsule from 10cap Test
OF CAPSULE	capsules	(Character No. 19) by the Capsule Length from
The weight of a capsule	S26 = 0.055 g in 2000 in	10cap Test (Character No. 17).
per cm of capsule from	Uvalde nursery; and 0.073 g	The 10 capsules can be sampled from
the center of the capsule	in 2001 in Uvalde nursery	physiological maturity through complete
zone	Distribution within Sesaco	drydown without an effect on this character.
	based on 10cap test in all	Comments: this character is used instead of
	nurseries in 1997-2001	capsule width. Capsule width is difficult to
	(Total number of samples	measure because there are so many variables in
	tested = 3144)	a capsule. In a bicarpellate capsule, the width
	low = 0.027 g	differs when measuring across one carpel or
	high = 0.123 g	both carpels. Capsules can also vary through
	1 = <0.046 g; 11.5%	the length of the capsule by being substantially
	2 = <0.065 g; 47.6%	narrower at the bottom, middle or top of the
	3 = <0.085 g; 35.6%	capsule. In 1997, four widths were measured
	4 = <0.104 g; 4.8%	on each capsule and then averaged. This
	5 = >0.103 g; 0.5%	average had a very high correlation to the
	avg. = 0.062 g, std = 0.014	capsule weight per cm of capsule.
		See Capsule Length from 10cap Test
		(Character No. 17) for effects of environmental
		factors
(21) VISUAL SEED	Subjective rating	When the plants in a plot are dry below
RETENTION	Values:	where the cutter bar would hit the plant, assign
Amount of seed in most of	Seed Retention	a rating based on the following guidelines. If
the capsules in the middle	8 = 100%	just identifying lines for further testing, use
half of the capsule zone	6 = 75%	V/X/W ratings. If identifying lines to use in a
when the plant(s) are dry	4 = 50%	crossing program to improve seed retention,
enough for direct harvest	2 = 25%	use 0-8 ratings. Ratings 6-8 can be seen
with a combine	0 = 0%	without removing the capsule from the plant.
	Intermediate values can be	For the other ratings, the capsules must be
	used.	opened. Rating is an overall subjective number
	V = >74% seed retention	since retention can vary from plant to plant and
	(sufficient seed retention for	even within a plant.
	10cap testing)	The effects of the environment are not fully
	X = <75% seed retention	known. There are indications that in drought
	(unsuitable for direct harvest)	or very low fertility conditions, there is less
	W = >74% seed retention	seed retention. When high propulations lead to
	on weathering in field after	low moisture or fertility, there is less seed
	rains and/or winds for more	retention. From normal conditions through
	than 3 weeks following	high moisture/fertility conditions, there does
	complete drydown	not appear to be an appreciable difference.
	S26 = W for all crops in all
	nurseries
(22) SHAKER	Unit of measure: Actual	See Capsule Length from 10cap Test
SHATTER	Number expressed as	(Character No. 17) for collection of capsules.
RESISTANCE	percentage	The capsules should be dried. The capsules
FROM 10cap TEST	Values: average of 10	should then be placed in flasks on a reciprocal
The amount of seed reten-	capsules	shaker with a 3.8 cm stroke with 250
tion after the capsules are	S26 = 72% in 2000 in	strokes/min for 10 minutes (see U.S. Pat.
dry, inverted, and put	Uvalde nursery; 74% in	No. 6,100,452). The seed that comes out of the
through a shaker	2001 in Uvalde nursery	capsules should be weighed as ‘out seed.’ The
	Distribution within Sesaco	retained seed should be threshed out of the
	based on 10cap test in all	capsules and weighed to compute the ‘total
	nurseries in 1997-2001	seed’. The shaker shatter resistance is
	(Total number of samples	computed as a percentage as follows: (total
	tested = 3043)	seed-out seed)/total seed.
	low = 0	The 10 capsules can be sampled from
	high = 100	physiological maturity through complete
	1 = <20; 12.3%	drydown without an effect on this character for
	2 = <40; 9.1%	shatter resistant types. When taking capsules
	3 = <60; 25.1%	after drydown, only capsules with all their seed
	4 = <80; 44.8%	are taken. Thus, this test cannot be done on
	5 = >79.9; 8.8%	shattering lines after drydown.
	avg. = 55.2%, std = 23.5	Comments: there are indications that in
		drought or very low fertility condition, there is
		less seed retention. When high populations lead
		to low moisture or fertility, there is less seed
		retention. From normal conditions through
		high moisture/fertility conditions, there does
		not appear to be an appreciable difference in
		seed retention. Lines with shaker shatter
		resistance >64.9% are known as non-dehiscent
		lines (see U.S. Pat. No. 6,100,452).
(23) CAPSULE	Subjective rating	The rating is based on visual seed retention
SHATTERING	Values:	and other visual observations. The plants
TYPE	SUS = Super-shattering (<2	remain standing in the field without shocking.
Amount of seed retention	visual seed retention-	GS plants can be identified while the plant
in a line or plant	equates to <25%)	is putting on capsules or at drydown because
	SHA = Shattering (<4 visual	the carpels in the capsules do not form false
	seed retention-equates to	membranes. There are plants that will have
	<50%)	capsules with false membranes on the lower
	SSH = Semi-shattering (4-6	and upper nodes but most of the capsules show
	visual seed retention-	no false membranes.
	equates to 50 to 75%)	ID plants can be identified during the
	SR = Shatter resistant (>6	growing season in that they have enations on
	visual seed retention without	the bottoms of the leaves. At dry down they are
	id or gs alleles-equates to	more difficult to distinguish from other lines
	>75%)	that have closed capsules (other than GS).
	ID = Indehiscent (presence	There is less of a suture than other capsule
	of id/id with capsule closed)	types.
	IDO = Indehiscent (presence	SUS, SHA, SSH, and SR are defined by
	of id/id with capsule open at	Visual Seed Retention (Character No. 21).
	tip)	Comments: most environmental factors do
	GS = Seamless (presence of	not have much of an effect on capsule
	gs/gs with capsule closed)	shattering type other than to make it more
	GSO = Seamless (presence of	difficult to distinguish in the overlap zone.
	gs/gs with capsule open at	Generally, higher moisture, higher fertility, and
	tip)	lower populations will increase the shattering a
	S26 = SR in all crops in all	small amount-less than 10%.
	nurseries	The wind can have a large effect in
		decreasing the amount of seed retention. Rain,
		dew and fog can also reduce seed retention.
(24) NON-DEHISCENT	Rating	Lines are designated as ND only after they
TEST	Values:	have undergone a minimum of 3 shaker shatter
A line that has passed the	ND = Non-dehiscent line	resistance tests. In order to be considered an
non-dehiscent test of	XX = Line that does not	ND variety, the line must pass the ND
having shaker shatter	pass the non-dehiscent test	threshold in multiple nurseries for multiple
resistance >64.9%. ND	S26 = ND for all crops in all	years. For example, S26 has a mean of 72.8%
lines should not have id or	nurseries	seed retention in 87 shaker shatter resistance
gs alleles.	Distribution within Sesaco	tests for 1997-2001.
	based on 10cap test in all
	nurseries in 1997-2001
	(Total number of samples
	tested = 3031)
	ND = 56.8%
	XX = 43.2%
(25) DAYS TO	Unit of measure: days	This data is taken as a date and later
FLOWERING	Values: number of days	converted to number of days. Flowering is
Number of days from	S26 = 41 days in 2000 in	defined as flowers that are open-not buds.
planting until 50% of the	Uvalde nursery; and 40	This is a somewhat subjective unit of
plants are flowering	days in 2001 in Uvalde	measure because there is little difference in the
	nursery	appearance of a line that has 40% and a line
	Distribution within Sesaco	that has 60% of plants with flowers. In
	based on lines in Uvalde	addition, the plots are not walked every day,
	nursery in 2000-2001	and thus there is an estimate that the plot was
	(Total number of samples	50% a few days before or after the date of data
	tested = 1831)	collection.
	low = 33 days	Comments: flowering can be accelerated
	high = 89 days	by drought and it can be delayed by higher
	1 = <44.2 days; 87.9%	moisture and/or fertility. Higher heat units will
	2 = <55.4 days; 7.8%	decrease the days to flowering.
	3 = <66.6 days; 2.4%	Some lines are photosensitive and will only
	4 = <77.8 days; 1.7%	begin flowering at a certain number of hours of
	5 = >77.7 days; 0.2%	daylight.
	avg. = 40.9 days, std = 6.3	Start of flowering does not always equate to
		start of capsule formation. Many lines will
		flower and not set capsules from the first
		flowers.
(26) DAYS TO	Unit of measure: days	This data is taken as a date and later
FLOWER	Values: number of days	converted to number of days. Flowering is
TERMINATION	S26 = 79 days in 2000 in	defined as flowers that are open-not buds. At
Number of days from	Uvalde nursery; and 72	the end of the flowering period, the rate that a
planting until 90% of the	days in 2001 in Uvalde	plant puts on open flowers is reduced. Thus,
plants have stopped	nursery	there can be more than 10% of plants with buds
flowering	Distribution within Sesaco	and still have reached this measure since there
	based on lines in Uvalde	will not be more than 10% flowering any one
	nursery in 2000-2001	day.
	(Total number of samples	This is a somewhat subjective unit of
	tested = 2668)	measure because there is little difference in the
	low = 61 days	appearance of a line that has 85% and a line
	high = 114 days	that has 95% of plants with no flowers. In
	1 = <71.6 days; 21.1%	addition, the plots are not walked every day,
	2 = <82.2 days; 61.5%	and thus there is an estimate that the plot was
	3 = <92.8 days; 15.9%	90% a few days before or after the date of data
	4 = <103.4 days; 0.8%	collection. Another problem is that under low
	5 = >103.3 days; 0.8%	moisture conditions the plots can reach the
	avg. = 77.1 days, std = 6.9	90% mark only to begin flowering again after a
		rain. In those cases the data is adjusted to the
		later number of days.
		The measure is based on the number of
		plants and not the number of flowering heads.
		The branches will stop flowering before the
		main stem, and thus the plot will appear like
		there are more plants not flowering.
		Comments: flower termination can be
		accelerated by lower moisture and/or fertility,
		and it can be delayed by higher moisture and/or
		fertility. Higher heat units will decrease the
		Days to Flower Termination. It is known that
		there are lines that stop flowering sooner than
		expected in northern latitudes, but it is not
		known if this is due to shorter photoperiod or
		cool temperatures.
(27) DAYS TO	Unit of measure: days	This data is taken as a date and later
PHYSIOLOGICAL	Values: number of days	converted to number of days. Physiological
MATURITY	S26 = 96 days in 2000 in	maturity (PM) is defined as the point at which
Number of days from	Uvalde nursery; and 103	{fraction (3/4 )} of the capsules have seed with final color.
planting until 50% of the	days in 2001 in Uvalde	In most lines, the seed will also have a seed
plants reach physiological	nursery	line and tip that are dark.
maturity	Distribution within Sesaco	This is a somewhat subjective unit of
	based on lines in Uvalde	measure because there is little difference in the
	nursery in 2000-2001	appearance of a line that has 40% and a line
	(Total number of samples	that has 60% of plants with PM. In addition,
	tested = 2374)	the plots are not walked every day, and thus
	low = 77 days	there is an estimate that the plot was 50% a few
	high = 140 days	days before or after the date of data collection.
	1 = <89.6 days; 16.8%	Comments: The concept of physiological
	2 = 102.2 days; 58.0%	maturity in sesame was developed by M.L.
	3 = <114.8 days; 23.6%	Kinman (personal communication) based on
	4 = <127.4 days; 1.4%	the concept of determining the optimum time
	5 = >127.3 days; 0.2%	to cut a plant and still harvest 95-99% of the
	avg. = 97.1 days, std = 7.1	potential yield. When the seed has final color,
		the seed can germinate under the proper
		conditions. If the plant is cut at physiological
		maturity, most of the seed above the {fraction (3/4 )} mark
		will continue maturing enough for germination,
		but will not have as much seed weight. Since in
		even a fully mature plant, there is less seed
		weight made at the top of the plant, this loss of
		seed weight does not seriously affect the
		potential seed weight of the plant.
		Although present harvest methods let the
		plants mature and go to complete drydown, PM
		is important because after that point, the crop is
		less susceptible to yield loss due to frost or
		disease. The PM is also important if the crop
		is to be swathed or dessicants are to be applied.
		Physiological maturity can be accelerated
		by lower moisture and/or fertility, and it can be
		delayed by higher moisture and/or fertility.
		Higher heat units will decrease the days to
		physiological maturity. Cool weather can delay
		physiological maturity.
(28) SEED COLOR	Subjective rating	This data is taken in the laboratory with the
The color of the seed coat	Values:	same lighting for all samples. The seed from
	WH = White	the whole plant is used.
	BF = Buff	Seed coat color is taken on mature seeds. If
	TN = Tan	there is any abnormal termination, the colors
	LBR = Light brown	are not quite as even. The color of immature
	GO = Gold	seed varies. Usually light seeded lines have tan
	LGR = Light gray	to light brown immature seed; tan, light brown,
	GR = Gray	gold, brown light gray, and gray lines have
	BR = Brown	lighter immature seed; black lines can have tan,
	RBR = Reddish brown	brown, or gray immature seed.
	BL = Black	Usually, moisture, fertility, population and
	S26 = BF in all crops in all	light intensity do not have an effect on seed
	nurseries	coat color. Light colored seeds in a drought
	Distribution within Sesaco	may have a yellowish tinge. Seeds in some
	based on seed harvested in all	lines in the tan, light brown and gold range can
	nurseries in 1982-2001 (Total	change from year to year among themselves.
	number of samples tested =
	161,809)
	WH = 0.8%
	BF = 74.8%
	TN = 9.0%
	LBR = 1.4%
	GO = 1.5%
	LGR = 0.6%
	GR = 1.4%
	BR = 6.5%
	RBR = 0.6%
	BL = 3.5%
(29) SEED WEIGHT-	Unit of measure: grams	Count out 100 seeds and weigh. The seed must
100 SEEDS FROM	Values: average of 3 samples	be dry.
WHOLE PLANT	S26 = 0.30 g in 2000 in	Comments: the weight increases with
Weight of 100 seeds taken	Uvalde nursery; and 0.31 g	higher moisture/fertility. Generally, the weight
from the whole plant	in 2001 in Uvalde nursery	is lighter than the seed weight taken from the
	Distribution within Sesaco	10cap test.
	based on stable lines in all
	nurseries in 1997-2001
	(Total number of samples
	tested = 1984)
	low = 0.10 g
	high = 0.46 g
	1 = <0.172 g; 0.6%
	2 = <0.244 g; 10.1%
	3 = <0.316 g; 56.0%
	4 = <0.388 g; 26.1%
	5 = >0.387 g; 7.3%
	avg. = 0.306 g, std = 0.05
(30) UVALDE KILL	Subjective rating	On the week a plot reaches PM, a rating is
RESISTANCE	Values: ratings are based on	assigned. The ratings are then taken for 2
The amount of plants	the number of plants killed in	additional weeks. The three ratings are
killed by root rots in the	a plot. Before physiological	averaged for a final kill rating. For example, if
Sesaco nurseries in	maturity (PM), the following	a plot has a final kill of 766, the average for the
Uvalde, TX	ratings are used:	plot will be 6.33. When a value of 1 or 2 is
	1 = >90% kill before Days to	assigned, there are no additional ratings and
	Flowering Termination	there is no averaging.
	(Character No. 26)	There are three root diseases that affect
	2 = >90% kill between Days	sesame in Texas: Fusarium oxysporum ,
	to Flowering Termination	Macrophomina phaseoli , and Phytophtora
	(Character No. 26) and Days	parasitica . Between 1988 and the present,
	to Physiological Maturity	spores of these three have been accumulated in
	(Character No. 27)	one small area of Uvalde, and thus it is an
	After PM, the following	excellent screening area for the diseases.
	ratings are used:	Although each root rot attacks sesame in a
	3 = >90% kill	different way with different symptoms, no
	4 = 50 to 89% kill	effort is made to differentiate which disease is
	5 = 25 to 49% kill	the culprit in each plot. Pathological screenings
	6 = 10 to 24% kill	in the past have found all 3 pathogens present
	7 = less than 10% kill	in dead plants.
	8 = no kill	Comments: normally, the ratings will
	S26 = 5.60 in 2000 in	decrease a maximum of one value per week.
	Uvalde nursery; and 7.22 in	There is an overlap between any two ratings,
	2001 in Uvalde nursery	but this is overcome to a certain extent by
	Distribution within Sesaco	using three ratings over 2 weeks.
	based on lines in Uvalde	The amount of kill is usually increased with
	nursery in 2000-2001	any type of stress to the plants. Drought can
	(Total number of samples	increase the amount of Macrophomina; too
	tested = 3045)	much water can increase the amount of
	low = 1.00	Phytophtora; high temperatures and humidity
	high = 8.00	can increase the amount of Fusarium and
	1 = <1.6; 1.7%	Phytophtora. High population can increase all
	2 = <3.2; 16.7%	three diseases.
	3 = <4.8; 38.7%	The ratings for any one year can be used to
	4 = <6.4; 31.2%	compare lines grown in that year, but should
	5 = >6.3; 11.6%	not be used to compare lines grown in different
	avg. = 4.52, std = 1.49	years. The amount of disease in any one year
		is highly dependent on moisture, humidity, and
		temperatures.
(31) RESISTANCE TO	Subjective rating	Ratings can be done in several ways:
FUSARIUM WILT	Values: 0 to 8 scale	1. Take ratings after the disease is no longer
( F. oxysporum )	% of infected plants	increasing
Amount of resistance to	8 = Zero disease	2. Take ratings on consecutive weeks until
Fusarium wilt	7 = <10% infected	disease is no longer increasing and average
	4 = 50% infected	ratings.
	1 = >90% infected	3. Take periodic ratings and average ratings.
	0 = all infected	Comments: Fusarium has been a problem
	NT = not tested	in South Texas, particularly on fields that have
	NEC = no economic	been planted with sesame before. Normally,
	damage-not enough disease	only the Uvalde Kill Resistance (Character No.
	to do ratings	30) rating is taken.
	S26 = 7 in 1998-2001 in
	Uvalde nursery
(32) RESISTANCE TO	Subjective rating	See Methodology for Resistance to Fusarium
PHYTOPHTORA	See Values for Fusarium	Wilt (Character No. 31)
STEM ROT ( P.	S26 = NT	Comments: Phytophtora has been a
parasitica )		problem in Arizona and Texas, particularly on
Amount of resistance to		fields that have been over-irrigated. Normally,
Phytophtora stem rot		only the Uvalde Kill Resistance (Character No.
		30) rating is taken.
(33) RESISTANCE TO	Subjective rating	See Methodology for Resistance to Fusarium
CHARCOAL ROT	See Values for Fusarium	Wilt (Character No. 31)
( Macrophomina	S26 = NT	Comments: Macrophomina has been a
phaseoli )		problem in Arizona and Texas, particularly on
Amount of resistance to		fields that go into a drought. Normally, only
Charcoal rot		the Uvalde Kill Resistance (Character No. 30)
		rating is taken.
(34) RESISTANCE TO	Subjective rating	See Methodology for Resistance to Fusarium
BACTERIAL	See Values for Fusarium	Wilt (Character No. 31)
BLACK ROT	S26 = NT	Comments: this disease occurs occasionally
( Pseudomonas		when there is continual rainy weather with few
sesami )		clouds. In most years, the disease abates once
Amount of resistance to		the weather changes. No economic damage has
bacterial black rot		been noticed.
(35) RESISTANCE TO	Subjective rating	Ratings can be done in several ways:
SILVERLEAF	Values: 0 to 8 scale	1. Take ratings after the insects are no longer
WHITE FLY	8 = Zero insects	increasing.
( Bemisia	7 = Few insects	2. Take ratings on consecutive weeks until
argentifolii )	4 = Many insects	insects are no longer increasing and average
Amount of resistance to	1 = Insects killing the plants	ratings.
the silverleaf white fly	NT = not tested	3. Take periodic ratings and average ratings.
	NEC = no economic	Comments: there have been very few years
	damage-not enough insects	(1991-1995) where the incidence of silverleaf
	to do ratings	white fly has affected nurseries or commercial
	S26 = NEC in 2000 in	crops. In most years, a few white flies can be
	Uvalde nursery	seen in the sesame with no economic damage.
		In the middle 1990s, the USDA began
		introducing natural predators of the silverleaf
		white fly in the Uvalde area. It is not known if
		the predators reduced the effects of the white
		fly or there is a natural tolerance to white fly in
		the current varieties. In the 2000 nursery,
		some lines were killed by the white fly.
		Higher temperatures decrease the number of
		days between generations. There are
		indications that higher moisture and fertility
		increase the incidence of white flies, but there
		is no definitive data.
		The sweet potato white fly ( Bemisia tabaci )
		has been observed in nurseries since 1978
		without any economic damage.
(36) RESISTANCE TO	Subjective rating	See Methodology for Resistance to Silverleaf
GREEN PEACH	See Values for White Fly	White Fly (Character No. 35)
APHIDS ( Myzus	S26 = NEC in 2000 in	Comments: there have been very few years
persicae )	Uvalde nursery	(1990-1995) where the incidence of green
Amount of resistance to		peach aphid has affected nurseries or
the green peach aphid		commercial crops. In most years, a few aphids
		can be seen in the sesame with no economic
		damage. There have been many years in West
		Texas when the cotton aphid has decimated the
		cotton and did not build up on adjacent sesame
		fields.
		Higher moisture and fertility increase the
		susceptibility to aphids.
(37) RESISTANCE TO	Subjective rating	See Methodology for Resistance to Silverleaf
POD BORERS	See Values for White Fly	White Fly (Character No. 35)
(Heliothis spp.)	S26 = NEC in 2001 in	Comments: there have been very few years
Amount of resistance to	Uvalde nursery	(1985) where the incidence of Heliothis has
pod borers		affected nurseries or commercial crops. In most
		years, a few borers can be seen in the sesame
		with no economic damage.
(38) RESISTANCE TO	Subjective rating	See Methodology for Resistance to Silverleaf
ARMY WORMS	See Values for White Fly	White Fly (Character No. 35)
(Spodoptera spp.)	S26 = NT	Comments: there have been very few years
Amount of resistance to		(1984-1987) where the incidence of
army worms		Spodoptera has affected commercial crops in
		Arizona. In Texas, army worms have
		decimated cotton and alfalfa fields next to
		sesame without any damage to the sesame. It is
		not known if the Arizona army worm is
		different from the Texas army worm.
(39) RESISTANCE TO	Subjective rating	See Methodology for Resistance to Silverleaf
CABBAGE	See Values for White Fly	White Fly (Character No. 35)
LOOPERS ( Pieris	S26 = NT	Comments: there have been very few years
rapae )		(1992-1993) where the incidence of cabbage
Amount of resistance to		loopers has affected nurseries. In commercial
cabbage loopers		sesame, cabbage loopers have been observed
		with no economic damage.
a Uvalde nursery as described above.
b San Angelo nursery as described above.

In developing sesame varieties for the United States, there are four major characters that are critical: Shaker Shatter Resistance (Character No. 22), Uvalde Kill Resistance (Character No. 30), Days to Physiological Maturity (Character No. 27), and Seed Weight— 100 Seeds from Whole Plant (Character No. 29). The first three characters contribute to yield which is the ultimate determinant for the farmer to grow a variety. In improving the characters, the yields have to be comparable to or better than current varieties, or provide a beneficial improvement for a particular geographical or market niche. Shaker Shatter Resistance determines how well the plants will retain the seed while they are drying down in adverse weather. Uvalde Kill Resistance determines whether the plants can finish their cycle and have the optimum seed fill. Days to Physiological Maturity determines how far north and to which elevation the varieties can be grown. Seed Weight— 100 Seeds from Whole Plant determines the market for the seed. Lack of Uvalde Kill Resistance can reduce Seed Weight— 100 Seeds from Whole Plant . In parts of the United States where there is little rain in dry years Resistance to Drought (Character No. 11) becomes important.

There are other characters important in developing commercial sesame varieties explained in Langham, D. R. and T. Wiemers, 2002, “Progress in mechanizing sesame in the US through breeding”, In: J. Janick (ed.), Trends in new crops and new uses , ASHS Press, Alexandria, Va. Branching Style (Character No. 1), Height of Plant (Character No. 5) and Height of First Capsule (Character No. 6) are important in combining. Capsule Zone Length (Character No. 7), Number of Capsule Nodes (Character No. 8), Average Internode Length within Capsule Zone (Character No. 9), and Seed Weight per Capsule (Character No. 18) are important in creating potential Yield at Drydown (Character No. 10). Leaf dimensions (Characters No. 12, 13, 14, and 15) are important in determining optimum populations. Number of Capsules per Leaf Axil (Character No. 2), Number of Carpels per Capsule (Character No. 16), Capsule Length (Character No. 17), Capsule Weight per Capsule (Character No. 19), and Capsule Weight per cm of Capsule (Character No. 20) are important in breeding for Visual Seed Retention (Character No. 21) which leads to testing for Shaker Shatter Resistance and determining the Capsule Shattering Type (Character No. 23). Days to Flowering (Character No. 25), Days to Flower Termination (Character No. 26), and Days to Physiological Maturity (Character No. 27) are highly correlated and important in determining the geographical range for the variety. In the United States and Europe, the Seed Color (Character No. 28) is important since the majority of the market requires white or buff seed. There are limited markets for gold and black seed in the Far East. All other colors can only be used in the oil market. In the United States, resistance to diseases and pests (Characters No. 31 to 39) are critical to allow the crop to reach maturity and harvest.

FIG. 2 provides the Shaker Shatter Resistance of all the varieties released by Sesaco since 1981. The figures are the mean from all testing in all nurseries from 1997 to 2001. S01 was an indehiscent variety with excellent seed retention, but the seed could not be threshed out without making the seed unmarketable. SO2 through SO, S12, and S14 were developed for swathing at Days to Physiological Maturity , drying in windrows, and then picking up with a combine. All of these varieties had good yields when there was little rain and high temperatures at harvest time. In the bad weather, the yields were reduced. Attempts were made to let these varieties dry down standing and then combining, but the yields were not commercially adequate. S11 was the first variety that could be left standing for harvest with adequate yields in normal weather. With the exception of S17, varieties S15 through S22 were released for specific niches. S17 replaced S1 in most locations until it was replaced by S23 and S24. In 2001, S25 replaced S23. S23 is considered to be the minimum acceptable Shaker Shatter Resistance for commercial use. S26 provides about 72.8% seed retention which is comparable to S24 and S25 and a desirable amount for mechanized harvesting.

FIG. 3 provides the Uvalde Kill Resistance of all the varieties released by Sesaco since 1981 as compared in the Uvalde nursery in 2001 using all plots. Uvalde Kill Resistance is a composite rating of resistance to three root rots: Fusarium, Phytophtora, and Macrophomina. When sesame is first introduced into a growing area, there are few disease problems, but over time the spores of these fungi accumulate and disease resistance becomes critical. When sesame was first introduced in Uvalde in 1988, the yields were high. As farmers planted on the same fields in subsequent years, the yields decreased. S11 was very susceptible to these root rots, and thus, it was replaced by S17, which was subsequently replaced by S23 and S24. In 2001, S25 replaced S23. S26 exhibits a rating of 7.42, which is better than previously released non-dehiscent lines.

FIG. 4 provides the mean Days to Physiological Maturity of all the varieties over the past four years in the Uvalde nursery. In the United States, sesame is currently grown from South Texas to southern Kansas. The growing window of a crop is determined by the earliest the crop can be planted in the spring as the ground warms up, and the onset of cold weather in the fall. Current sesame varieties require about 21° C. ground temperature to establish an adequate population. In most years, the ground is warm enough in South Texas in middle April and in southern Kansas in late May. Current sesame varieties require night temperatures above 5° C. for normal termination. In most years, the night temperatures are warm enough in South Texas until middle November and in southern Kansas until middle October. There have been years when cold fronts affect the growth of sesame in the middle of September in the north. East of Lubbock, Tex., the elevations begin climbing towards the Rocky Mountains, and there are later warm temperatures in the spring and earlier cold temperatures in the fall. In all years, if the sesame is planted as early as temperatures allow, lines with Days to Physiological Maturity of 105 days or less will have no problems. However, most areas are rainfed, and it is essential to have a planting rain before planting the sesame. Thus, the earlier the Days to Physiological Maturity of the variety, the more flexibility the farmers have with planting date. In South Texas, the goal is to have varieties with a Days to Physiological Maturity of less than 110 days while in southern Kansas the goal is less than 90 days. The mean Days to Physiological Maturity for S26 is 100 days, and thus, S26 is limited in terms of planting date and geographical distribution.

FIG. 5 provides the average Seed Weight— 100 Seeds from Whole Plant of all varieties between 1997 and 2001. The dehulled market is the premium use of sesame in the United States and Europe. In recent years, dehulled processors have been increasing the specifications of Seed Weight— 100 Seeds from Whole Plant to between 0.28 and 0.30 g, and larger seed is preferable. To date, the Sesaco varieties with the highest Seed Weight— 100 Seeds from Whole Plant have had marginal Shaker Shatter Resistance and poor Uvalde Kill Resistance . Some markets have no specifications on seed weight, but larger seed is still desirable. The mean Seed Weight— 100 Seeds from Whole Plant for S26 is 0.31 g, which is larger than the current varieties of S24 and S25. The processors prefer the size of S26 for dehulled products on top of breads and buns.

FIG. 6 provides the mean Resistance to Drought of all the varieties in the 2000 San Angelo nursery. In 2000, in San Angelo, there was a drought with very low moisture in the soil profile at planting, and the one irrigation of less than 50 mm was applied too late to help the crop. Resistance to Drought ratings were taken, and S26 was the best with 6.4. The other two good varieties were SO4 and S22, but these are extremely susceptible to root rots.

Prior to 1988, all of the commercial sesame in the United States was grown in Arizona. S01 through S10, S12, and S14 were specifically developed for Arizona. From 1988 to 1991, there was a transition from Arizona to Texas. In 1996, sesame spread into Oklahoma, and in 1998, into Kansas. In introducing sesame to Texas, the swathing technology was tried on S07 and S10, but farmers did not have the proper equipment; the plants fell into the furrows and could not be picked up; and/or blowing sand covered parts of the windrows. S11 was the first variety that could be combined directly, and S11 persisted until 1995. However, in addition to being susceptible to root rots, S11 was also susceptible to pests such as green peach aphids ( Myzus persicae ) (Character No. 36) and silverleaf white fly ( Bemisia argentifolii ) (Character No. 35), and S11 had too long a Days to Physiological Maturity (109 days) for West Texas. S15 was introduced for West Texas, but shorter Days to Physiological Maturity (107 days) was still not early enough and the Shaker Shatter Resistance (38.7% seed retention) was not adequate. S16 was released specifically because it was tolerant to the white fly, but it did not have good Shaker Shatter Resistance (42% seed retention) or Uvalde Kill Resistance (2.0 rating), and it was susceptible to lodging. S17 had better Uvalde Kill Resistance (5.56 rating), aphid resistance, and white fly resistance than S11. With an earlier Days to Physiological Maturity (98.5 days), S17 was the first variety that was suitable for West Texas and southern Kansas; however, S17 was susceptible to lodging. S18 and S21 were released for flavor for the Japanese organic market. S19 had improved lodging resistance over S17, but the yields in non-windy areas were not as good as S17. S20 and S22 were released because of excellent drought resistance. In the rainfed areas of Central Texas, the yields of S20 and S22 were higher than S17, the large seed was desirable to processors, and no root rots had been seen. However, the root rot spores began accumulating, and the S20 and S22 had to be discontinued. S24 replaced S17 based on higher Shaker Shatter Resistance (74.4% for S24 compared to 60.8% for S17), better Uvalde Kill Resistance (rating of 6.18 for S24 compared to 5.56 for S17), shorter Days to Physiological Maturity (95.0 days for S24 compared to 98.5 for S17), and larger Seed Weight— 100 Seeds from Whole Plant (0.30 g for S24 compared to 0.26 g for S17). S23 was used in southern Kansas and northern Oklahoma because of a shorter Days to Physiological Maturity than S24 (89 days for S23 compared to 95 days for S24), but the Seed Weight— 100 Seeds from Whole Plant was marginal (0.26 g for S23 compared to 0.30 g for S24). S25 replaced S23 in southern Kansas and northern Oklahoma even though the Days to Physiological Maturity is not quite as short (90.25 days for S25 compared to 89.0 days for S23). Compared to S23, S25 has better Shaker Shatter Resistance (72.9% seed retention for S25 compared to 65.7% seed retention for S23) and Uvalde Kill Resistance (rating of 6.72 for S25 compared to 6.22 for S23), but the major reason for the replacement is the Seed Weight— 100 Seeds from Whole Plant (0.29 g for S25 compared to 0.26 g for S23).

S26 was developed for its Resistance to Drought with a rating of 6.4 as compared to the other two current varieties: 3.6 for S24 and 2.5 for S25. Compared to S24 and S25, S26 has comparable Shaker Shatter Resistance (72.8% seed retention for S26 compared to 72.9% for S25 and 74.4% for S24), better Uvalde Kill Resistance (rating of 7.42 for S26 compared to 6.72 for S25 and 6.18 for S24), better Seed Weight— 100 Seeds from Whole Plant (0.31 g for S26 compared to 0.29 g for S25 and 0.30 g for S24). In terms of the Days to Physiological Maturity S26 takes longer to mature than the current varieties (100 days for S26 compared to 90.25 days for S25 and 95 days for S24. As a result, there is a limit to the geographical range of S26 to the north.

Over the past 24 years, Sesaco has tested 2,738 introductions from all over the world. Commercial samples have been obtained from China, India, Sudan, Ethiopia, Burkina Faso, Nigeria, Mozambique, Pakistan, Myanmar, Bangladesh, Vietnam, Egypt, Mexico, Guatemala, Nicaragua, Venezuela, Thailand, Turkey, Upper Volta, Uganda, Mali, Kenya, Indonesia, Sri Lanka, Afghanistan, Philippines, Colombia, Ivory Coast, Gambia, Somalia, Eritrea, Paraguay, and El Salvador. Additional research seed has been received from the commercial countries and from many other countries such as Australia, Iraq, Iran, Japan, Russia, Jordan, Yemen, Syria, Morocco, Saudi Arabia, Angola, Argentina, Peru, Brazil, Cambodia, Laos, Sri Lanka, Ghana, Gabon, Greece, Italy, South Korea, Libya, Nepal, Zaire, and Tanzania. Research seed received from one country may have originated from another unspecified country. All the commercial and research introductions have Capsule Shattering Type “SHA”. Using selected characters from Table I, Table II provides a character differentiation between S26 and name cultivars from all over the world.

Table III compares S24, S25, and S26 using all of the characters in Table I. In Table III, some of the values are different from the values used in FIGS. 2-5 . The values in Table III are from side by side plots grown under the same conditions, and the values in FIG. 2 to FIG. 5 are based on averages of all of the S24, S25, and S26 plots grown in the nurseries and dates indicated. The major differences are indicated in the “Dif” column by a “C” for commercially important differences and an “M” for morphological differences.

TABLE II
Character Differentiation of Various Sesame Varieties a
Character	Rating	Name cultivars tested by Sesaco
Capsule Shattering	SHA	From Venezuela: Venezuela 51,
Type		Venezuela 52, Guacara, Aceitera, Inamar,
(Character No. 23)		Acarigua, Morada, Capsula Larga,
		Arawaca, Piritu, Glauca, Turen, DV9,
		Fonucla, UCLA
		From Mexico: Pachequeno, Yori, Anna,
		Teras, Denisse, Canasta, Tehvantepeter
		From India: TMV1, TMV3
		From Turkey: Ozberk, Muganli, Gamdibi,
		Marmara
		From Israel: DT45
		From Guatemala: R198, R30
		From Texas: Llano, Margo, Dulce,
		Blanco, Paloma, Oro, Renner 1 and 2,
		Early Russian
		From California: UCR3, UCR4, Eva,
		Calinda (Cal Beauty)
		From Thailand: KU18
		From Korea: Danback, Gwansan,
		Pungyiong, Suweon, Yuseong, Hanseon,
		Ahnsan, Kwangsan, Jinback, Pungsan,
		Sodan, Yangheuk, Konheuk, Whaheuck,
		Sungboon
	SSH	From Sesaco: S02, S03, S04, S05, S06,
		S07, S08, S09, S10, S12, S14
	ID	From Venezuela: G2, Morada id
		From Texas: Rio, Delco, Baco, Improved
		Baco, Roy, Eli
		From South Carolina: Palmetto
		From California: UCR234
		From Sesaco: S01
	SR	All others, go to Non-dehiscent Test
Non-dehiscent Test	XX	From Sesaco: S11, S15, S16, S17, S18,
(Character No. 24)		S19, S20, S21
	ND	All others, go to Branching Style
Branching Style	U	From Sesaco: S22, 19A, 11W
(Character No. 1)	B	All others, go to Number of Capsules per
		Leaf Axil
Number of Capsules	3	From Sesaco: S23
per Leaf Axil	1	From Sesaco: S24, S25, S26
(Character No. 2)
a SHA = shattering; SSH = semi-shattering; ID = indehiscent; SR = shatter resistant; XX = not non-dehiscent according to the teachings of U.S. Pat. No. 6,100,452; ND = non-dehiscent according to the teachings of U.S. Pat. No. 6,100,452; U = uniculm branching style; and B = true branching.

TABLE III
Character Comparison of S24, S25, and S26 a
No.	Character	Year/nursery	S24	S25	S26	Dif
1	Branching Style	All	B	B	B
2	Number of Capsules per Leaf Axil	All	1	1	1
3	Maturity Class	1998-2001	UV	M	E	M	C
4	Plant Phenotype	All	B1M	B1E	B1M	C
5	Height of Plant (cm)	2000	UV	126	125	128
		2001	UV	129	126	144
6	Height of First Capsule (cm)	2000	UV	50	49	53
		2001	UV	45	41	50
7	Capsule Zone Length (cm)	2000	UV	76	76	75
		2001	UV	84	86	94
8	Number of Capsule Nodes	2000	UV	27	26	23
		2001	UV	29	29	29
9	Average Internode Length within	2000	UV	2.8	3.0	3.3	M
	Capsule Zone (cm)	2001	UV	2.9	3.0	3.3	M
10	Yield at Drydown (kg/ha)	2000	UV	1270	1343	1421	C
		2001	UV	1074	1614	1696	C
		2000	SA	202	87	390	C
		2001	SA	1514	1450	1611	C
11	Resistance to Drought	2000	SA	3.6	2.5	6.4	C
12	Leaf Length (cm)	5 th - 2001	SA	19.7	22.6	30.4	M
		10 th - 2001	SA	19.2	18.7	20.1
		15 th - 2001	SA	15.5	14.8	18.6	M
13	Leaf Blade Length (cm)	5 th - 2001	SA	14.4	14.6	17.1	M
		10 th - 2001	SA	14.3	14.1	14.1
		15 th - 2001	SA	12.7	12.1	14.4	M
14	Leaf Blade Width (cm)	5 th - 2001	SA	9.3	8.3	19.5	M
		10 th - 2001	SA	4.2	3.8	6.5	M
		15 th - 2001	SA	2.7	2.3	3.2	M
15	Petiole Length (cm)	5 th - 2001	SA	5.3	8.0	13.2	M
		10 th - 2001	SA	4.9	4.6	6.0	M
		15 th - 2001	SA	2.8	2.7	4.2	M
16	Number of Carpels per Capsule	All	2	2	2
17	Capsule Length (cm)	2000	UV	2.9	2.7	2.2	M
		2001	UV	2.9	2.8	2.3	M
18	Seed Weight per Capsule (g)	2000	UV	0.186	0.202	0.216	M
		2001	UV	0.198	0.213	0.252	M
19	Capsule Weight per Capsule (g)	2000	UV	0.118	0.108	0.113
		2001	UV	0.157	0.138	0.169
20	Capsule Weight per cm of	2000	UV	0.041	0.040	0.055	M
	Capsule (g)	2001	UV	0.053	0.048	0.073	M
21	Visual Shatter Resistance	All	W	W	W
22	Shaker Shatter Resistance (%)	2000	UV	77	79	72
		2001	UV	79	76	74
23	Capsule Shattering Type	All	SR	SR	SR
24	Non-dehiscent Test	All	ND	ND	ND
25	Days to Flowering	2000	UV	39	37	41	C
		2001	UV	39	36	40	C
26	Days to Flower Termination	2000	UV	78	75	79	C
		2001	UV	69	66	72	C
27	Days to Physiological Maturity	2000	UV	91	87	96	C
		2001	UV	97	92	103	C
28	Seed Color	All	BF	BF	BF
29	Seed Weight-100 Seeds from	2000	UV	0.25	0.25	0.30	C
	Whole Plant (g)	2001	UV	0.27	0.27	0.31	C
30	Uvalde Kill Resistance	2000	UV	4.60	5.67	5.60	C
		2001	UV	5.67	6.22	7.22	C
31	Resistance to Fusarium Wilt ( F.	1998-2001	UV	5	6	7	C
	oxysporum )
32	Resistance to Phytophtora Stem Rot			NT	NT	NT
	( P. parasitica )
33	Resistance to Charcoal Rot			NT	NT	NT
	( Macrophomina phaseoli )
34	Resistance to Bacterial Black Rot	1997	OK	NEC	NEC	NT
	( Pseudomonas sesami )
35	Resistance to Silverleaf White Fly	2000	UV	NEC	NEC	NEC
	( Bemisia argentifolii )
36	Resistance to Green Peach Aphid	2000	UV	NEC	NEC	NEC
	( Myzus persica )
37	Resistance to Pod Borer (Heliothis	2001	UV	NEC	NEC	NEC
	spp.)
38	Resistance to Army Worms			NT	NT	NT
	(Spodoptera spp.)
39	Resistance to Cabbage Loopers			NT	NT	NT
	( Pieris rapae )
a B = true branches; UV = Uvalde nursery; M = medium maturity class of 95-104 days; E = early maturity class of 85-94 days; B1M = phenotype of true branches, single capsules per leaf axil, and medium maturity class of 95-104 days; B1E = phenotype of true branches, single capsules per lead axil, and early maturity class of 85-94 days; SA = San Angelo nursery; W = weather visual seed retention >75%; SR =
# shatter resistant; ND = non-dehiscent; BF = buff color; NT = not tested; NEC = no economic damage-not enough disease to do ratings; and OK = Oklahoma nursery planted east of Clinton, Oklahoma (latitude 35°29′ north, longitude 99°29′ west, 489 m elev) in early to middle June from 1996-1997; mean rainfall is 667 mm annually with a mean of 281 mm during the growing season; average daily temperatures range from a low of 3° C. in
# January and an average high of 28° C. in July; the nursery planted on 91 cm beds; the nursery rainfed; the fertility 20 units of nitrogen.

The morphological differences show how S26 is different from S24 and S25, but these are not commercially significant. The three major areas of morphological differences are in the internode length, the size of the leaves, and the capsule characters.

S26 has a longer Average Internode Length within Capsule Zone than S24 and S25. This character does not generally have an effect on any commercially important characters.

S26 has longer leaves, wider leaves and longer petioles than S24 and S25 as shown in Leaf Length, Leaf Blade Length, Leaf Blade Width , and Petiole Length . The differences on the 10 th leaf are not as significant. With the present agronomic practices, the sizes of the leaves have no commercial significance.

S26 has a shorter and wider capsule than S24 and S25 as shown in Capsule Length and Capsule Weight per cm of Capsule . As mentioned before, there is a slight positive correlation between capsule width and Capsule Weight per cm of Capsule . Wongyai (Wongyai W. and S. Juttpompong, 1992. “Indirect selection for seed weight in sesame using capsule size as a criteria,” Sesame and Safflower Newsletter, No. 7, p.4-7) showed a positive correlation between capsule width and Seed Weight— 100 Seeds from Whole Plant which is a commercially significant difference as discussed below. There is also a slight positive correlation between seed weight and Seed Weight per Capsule with S26 having a higher weight per capsule than S24 and S25. Despite these slight positive correlations, capsule width is not used as a commercially significant selection filter, e.g., there are commercially viable lines with narrow capsules.

The major commercial differences between S26 and the S24 and S25 are in the maturity, the yields as affected by resistance to disease and to drought, and seed weight.

Maturity Class, Plant Phenotype, Days to Flowering, Days to Flower Termination , and Days to Physiological Maturity are all related. Maturity Class and Plant Phenotype are based on Days of Physiological Maturity , and there is a high positive correlation between Days to Physiological Maturity and Days to Flowering and Days to Flower Termination . Basically, the later the start and end of flowering, the longer it takes to reach physiological maturity. S26 is later than S24 and S25 restricting the geographical range of S26 to central Oklahoma and south.

Yield at Drydown in Uvalde, Uvalde Kill Resistance , and Resistance to Fusarium Wilt are all related. The yields in Uvalde of S26 were greater than S24 and S25. The yields of S24 were reduced by greater susceptibility to root rots than S25 and S26. In years when there is little disease, the Yield at Drydown in Uvalde of S24, S25, and S26 are not statistically different.

Yield at Drydown in San Angelo and Resistance to Drought are related. S26 is more drought resistant than S24 which is more drought resistant than S25. In 2000 in San Angelo, there was a drought with very low moisture in the soil profile at planting, and the one irrigation of less than 50 mm was applied too late to help the crop. S26 outyielded S24 by 93% and S25 by 348%. In a normal year such as 2001, S26 outyielded S24 by 6% and S25 by 11%. S24 and S25 are not recommended for rainfed conditions where there is low annual rainfall or where there is a drought in progress. S26 is the choice variety under these conditions.

On May 10, 2002, a deposit of at least 2500 seeds of sesame plant S26 was made by Sesaco Corporation under the provisions of the Budapest Treaty with the American Type Culture Collection (ATCC), 10801 University Boulevard, Manassas, Va. 20110-2209, and the deposit was given ATCC Patent Deposit Designation No. PTA-4317. This deposit will be maintained in the ATCC depository for a period of 30 years or 5 years after the last request or for the enforceable life of the patent, whichever is longer. Should the seeds from the sesame line S26 deposited with the American Type Culture Collection become inviable, the deposit will be replaced by Sesaco Corporation upon request.

The foregoing invention has been described in some detail by way of illustration and characters for purposes of clarity and understanding. However, it will be obvious that certain changes and modifications may be practiced within the scope of the invention as limited only by the scope of the appended claims.

Claims

1. Seed of sesame variety designated S26, a sample of said seed having been deposited under ATCC Accession No. PTA-4317.

2. A sesame plant or part thereof produced by growing the seed of sesame variety S26, a sample of said seed having been deposited under ATCC Accession No. PTA-4317.

3. Pollen of said sesame plant of claim 2.

4. A sesame plant having all the physiological and morphological characteristics of sesame variety S26, a sample of the seed of said variety having been deposited under ATCC Accession No. PTA-4317.

5. A sesame plant having all the physiological and morphological characteristics of a sesame plant produced by growing seed sesame variety S26, a sample of said seed having been deposited under ATCC Accession No. PTA-4317.

6. A tissue culture of regenerable cells produced from seed of sesame variety S26, sample of said seed having been deposited under ATCC Accession No. PTA-4317.

7. A tissue culture of regenerable cells produced from sesame plant S26 or a part thereof produced by growing the seed of sesame variety S26, a sample of said seed having been deposited under ATCC Accession No. PTA-4317.

8. A sesame plant regenerated from a tissue culture of regenerable cells produced from seed of sesame variety S26, a sample of said seed having been deposited under ATCC Accession No. PTA-4317, wherein said regenerated sesame plant has all the physiological and morphological characteristics of said sesame variety S26.

9. A sesame plant regenerated from a tissue culture of regenerable cells produced from a sesame plant produced by growing the seed of sesame variety S26, a sample of said seed having been deposited under ATCC Accession No. PTA-4317, wherein said regenerated sesame plant has all the physiological and morphological characteristics of said sesame variety S26.

10. A method of producing sesame seed, comprising crossing a first parent sesame plant with a second parent sesame plant and harvesting the resultant sesame seed, wherein said first or second parent sesame plant was produced by growing seed of sesame variety S26, a sample of said seed having been deposited under ATCC Accession No. PTA-4317.