The disclosed technology uses a terrestrial or ground-based mounting system to mount solar modules.
Solar modules are assemblies of multiple photovoltaic (PV) cells wired to form a single unit, typically rigid but sometimes flexible. Multiple solar modules can be wired together in series to form an array of strings. These strings connect to a power receiving unit that provides power to the grid or other load, typically an inverter or other controller. One or more solar arrays compose a solar plant.
Utility-scale solar PV power plants differ from other solar power and electricity installations. Due to the size, energy cost, safety regulations, and operating requirements of utility-scale power plants, the components, hardware design, construction means and methods, operations, and maintenance all have specific, unique features earning the designation utility-scale.
Power production with modules has been expensive because PV cells within the module have been expensive to manufacture and highly inefficient. But over the past 40 years, advances in module manufacturing have lowered PV electricity costs.
When PV cells were expensive, significant costs were incurred to correctly point the modules at the sun to maximize energy production. At first, dual-axis trackers positioned PV arrays substantially perpendicular to the sun's rays throughout the day and the year. Dual-axis trackers are expensive and difficult to maintain. But they maximized the energy output of the much more expensive photovoltaics.
As module prices fell and efficiency improved, dual-axis trackers became less necessary. And less expensive fixed-tilt trackers and single-axis trackers were employed to lower costs. Fixed-tilt and single-axis trackers are also expensive and difficult to maintain but less so than dual-axis trackers. Further developments included adapting these newer systems for rooftop mounting on home, office, commercial, and industrial buildings. Fixed-tilt and single-axis tracking methods are often categorized as ground mount technologies, separating them from roof-mount technologies. Ground mount means that the modules are supported by free-standing structures with dedicated foundations rather than a building. Flat on ground systems (FOG) employee modules that are supported by contacting the ground.
Large solar farms have used dual-axis, fixed-tilt, and single-axis trackers to point solar modules toward the sun. Some systems also account for solar elevation or otherwise account for the effect of the sun's analemma. These systems increase efficiency by aligning the modules normal to the sunlight and utilizing the solar cells' physical area more efficiently.
Modules are generally waterproof and durable. For example, modules commonly withstand hail of up to 25 mm (one inch), falling at 23 m/sec.
While modules accumulate dust, as a practical matter, racked solar modules are not cleaned very often because the expected energy return from removing accumulated dirt and dust doesn't offset the very high cleaning expense.
Conceptually, a solar array, or a portion of an entire solar plant, could be series-wired to provide electrical power at a transmission voltage. But the need to segment a solar plant for redundancy, maintenance, and avoiding arcing to the ground calls for voltage limiting the solar modules because of potential arcing through the glass and backing. In typical configurations, the array output voltage is 1500 volts, with lower voltages such as 600 volts for residential applications. Therefore, conventionally, solar arrays are voltage limited. Modules sit in groups called strings to limit the voltage. Strings, in turn, connect to inverters with harnesses of varying configurations according to the length of the strings and other considerations.
The harnesses themselves are expensive. Since the system is voltage limited, the total power output of the plant translates to substantial wiring costs. Similarly, power losses through the wiring harness translate to additional costs. Therefore, configurations that reduce harness length are desirable.
Since rack mounted modules cast shadows, traditional utility scale solar distances adjacent module rose to avoid shadows cast by racked modules. This distancing makes it impractical to string modules across rows.
Wind presents another problem for rack- or tracker-mounted solar modules. These structures are giant sails. High expected winds often significantly increase solar power plant costs. And high winds easily damage the modules themselves, requiring expensive upkeep.
Furthermore, wind-induced cyclic loading also can lead to microcracking, which has become a significant issue, shortening long-term module warranties.
Racks and tracker mounts also suffer from exposure to soils and corrosive air. For example, typical power plants use steel piles. To support the small, sail-like mounted arrays, these piles must resist corrosion for a long time, frequently 25 or more years despite corrosion.
To the extent that the material doesn't conflict with the current disclosure, this disclosure incorporates by reference the entire contents of the following patent applications: Ser. No. 17/153,845; 63/120,931; 63/079,778; 63/021,825; 63/052,369; 63/052,367; 62/963,300; 17/152,663; 63/021,928; 62/903,369; 16/682,503; 16/682,517; 17/079,949; 63/172,599; 17/316,647; 17/316,535; 17/336,393; 17/336,404; 17/336,407; 17/336,417; 17/336,431; 17/336,442; 17/336,699; 17/337,234; and Ser. No. 17/337,240.
Unless defined otherwise, all technical and scientific terms used in this document have the same meanings as commonly understood by one skilled in the art to which the disclosed invention pertains. Singular forms—a, an, and the—include plural referents unless the context indicates otherwise. Thus, reference to “fluid” refers to one or more fluids, such as two or more fluids, three or more fluids, etc. When an aspect is to include a list of components, the list is representative. If the component choice is limited explicitly to the list, the disclosure will say so. Listing components acknowledges that versions exist for each component and any combination of the components—including combinations that specifically exclude any one or any combination of the listed components. For example, “component A is chosen from A, B, or C” discloses versions with A, B, C, AB, AC, BC, and ABC. It also discloses (AB but not C), (AC but not B), and (BC but not A) as versions, for example. Combinations that one of ordinary skill in the art knows to be incompatible with each other or with the components' function in the invention are excluded, in some versions.
When an element or layer is called being “on”, “engaged to”, “connected to” or “coupled to” another element or layer, it may be directly on, engaged, connected, or coupled to the other element or layer, or intervening elements or layers may be present. When an element is called being “directly on”, “directly engaged to”, “directly connected to”, or “directly coupled to” another element or layer, there may be no intervening elements or layers present. Other words used to describe the relationship between elements should be interpreted in a like fashion (e.g., “between” versus “directly between”, “adjacent” versus “directly adjacent”, etc.).
Although the terms first, second, third, etc., may describe various elements, components, regions, layers, or sections, these elements, components, regions, layers, or sections should not be limited by these terms. These terms may distinguish only one element, component, region, layer, or section from another region, layer, or section. Terms such as “first”, “second”, and other numerical terms do not imply a sequence or order unless indicated by the context. Thus, a first element, component, region, layer, or section discussed below could be termed a second element, component, region, layer, or section without departing from this disclosure.
Spatially relative terms, such as “inner”, “outer”, “beneath”, “below”, “lower”, “above”, and “upper” may be used for ease of description to describe one element or feature's relationship to another element or feature as illustrated in the figures. Spatially relative terms may be intended to encompass different orientations of the device in use or operation besides the orientation depicted in the figures. For example, if the device in the figures is turned over, elements described as “below” or “beneath” other elements or features would then be oriented “above” the other elements or features. Thus, the example term “below” can encompass both an orientation of above and below. The device may be otherwise oriented (rotated 90 degrees or at other orientations) and the spatially relative descriptors interpreted.
The description of the versions has been provided for illustration and description. It is not intended to be exhaustive or to limit the invention. Individual elements or features of a particular exemplar are not limited to that exemplar but, where applicable, are interchangeable and can be used in a selected exemplar, even if not explicitly shown or described. The same may also be varied. Such variations are not a departure from the invention, and all such modifications are included within the invention's scope.
Components
Variations on utility-scale PV module electricity generating systems are disclosed. These systems are characterized by mounting some or all the modules substantially flat on the ground, dispensing with tracker or racking structure (inclusively “racked” systems). Mounting modules flat on the ground results in the module orientation being directed by contact with the ground (Earth). Such an orientation is fundamentally different than the custom or semi-custom orientation that racking creates (sun-oriented).
This document provides a technique for generating electricity using either commercially available, utility-scale, solar (e.g., CSi, CdTe, CIGS, CIS) modules, or future adaptations of commercially available, utility-scale, solar modules, or new module technologies, a plurality of which contact the earth's surface and sit parallel to it. This is called flat-on-ground mounting or technology. FOG mounting establishes a topographical orientation of the modules, as distinguished from a sun orientation in which the sun's direction dictates the direction the modules point.
In some versions, a contact surface defines a starting point of a pass-through structure pressure found and directly beneath the contact surface. In some versions, “FOG” means any mounting substantially parallel to the earth or ground that places the plane of the array within less than a short distance of the ground.
Depending upon the exemplar, the modules sit edge-to-edge, end-to-end, or both. FOG systems have a tiny exposure to air (wind) moving across the modules, allowing them to largely dispense with mounting hardware to hold modules against the ground. But some embodiments use mounting hardware. Various methods of attaching the modules to the ground or each other are contemplated for arrays that use such optional connections. FOG substantially reduces wind loading on the modules, avoiding high wind forces and wind-induced micro-cracking. FOG systems have low module elevations. FOG systems withstand winds up to 194 miles per hour.
Also, FOG mounting provides significant advantages when used with commercially available string- or micro-inverters. But FOG mounting does not preclude using industry-standard central inverters or alternate power conversion and transmission technologies.
FOG mounting eliminates the need for the steel structures required by racked systems. Thus, FOG mounting eliminates structural corrosion and increases power plant life expectancy from 25 years to perhaps longer than 40 years while significantly reducing initial costs. Nonetheless, steel, coated or otherwise, can be used with the system. FOG systems frequently include commercially available and compatible new module cleaning or dust removal techniques.
FOG mounting can use commercially available and compatible new methods for module cooling from the backside of the modules, including evaporative cooling, alternate high-emissivity coatings, air-vented module frame edges, coatings with various added, enhanced heat-transfer materials, and or methods, thereby increasing the modules' effective energy production. FOG mounting also avoids indirect sunlight and sunlight-heated ground from heating the modules. Thus, the ground beneath the modules becomes a heat sink. In some versions, the module backs are coated with a dark or heat-transmitting coating to promote heat transfer to the ground or airspace beneath the modules.
The shadows cast by racked systems extend far from the racking. To avoid shading adjacent panels, racked systems must be placed far apart. Site- or topographically oriented systems are much closer to the ground than racked systems, yielding little or no shadowing. Shadow-caused spacing in a FOG system is virtually zero, in some versions.
FOG mounting increases the power density per acre of land, which reduces the needed land area by more than 50% of traditional utility-scale solar plant PV power plants in some cases. FOG mounting allows the PV array to follow the land's existing contour, in some versions, completely obviating the need for land preparation such as mass grading, plowing, tilling, cutting, and filling. For racked systems, the developer must be able to sink the piles that mount the racking into the ground at least twice the depth that the piles extend above the ground. This requirement presents a significant subsurface risk to utility scale PV development, which is completely absent from FOG systems.
In some versions, lower electrical losses due to wiring, lower energy losses due to module cleaning, lower costs (materials, construction, and real estate), shorter construction schedule, and lower risk ultimately leading to an overall reduction in produced energy price (LCOE) of greater than 10% over current technologies.
FOG mounting reduces wind loading and uplift forces, eliminates module-to-module shading, requires zero or minimal row spacing, and increases the ground coverage ratio. And it orients the modules parallel to existing topography, independent of a site's azimuth angle.
Modules are typically flat rectangles (or any other convenient space-filling shape). Current versions modify module installation techniques to allow installation directly on the ground and are configured to take advantage of the ground's cooling and heat-sinking effects. Placing the modules sometimes includes using attachment brackets. In some versions, the modules snap into or otherwise secure the attachment brackets, retaining the array on or near the ground. FOG placement avoids mounting the modules on racks and avoids shadows
FOG systems can be constructed with little or no gaps between adjacent modules. Eliminating the gaps allows a two-dimensional array, when desired, of closely adjacent modules to extend row-wise and column-wise (from row to row). In other words, gaps between sequential modules from row to row can closely approximate gaps between sequential modules along the rows. Ultimately, modules in a FOG arrangement use far less land area than racked systems. In some versions, FOG arrays use less than 50%, 45%, 40%, 35%, or 30% of the land area used by racked systems. Some versions dispense with module-to-module mechanical connections or some inter-module connections do not control the spacing between modules.
In some versions, this adjacent positioning allows wiring connections or harnesses to take advantage of the adjacent relationships across two or more rows, reducing wire lengths. In some versions, adjacent positioning reduces home run harness lengths.
Eliminating racking produces an additional wiring advantage. Since there are no racks, there is no need to extend rack lengths to limit string voltages. Removing this constraint, in turn, allows the strings to terminate at both ends of the strings (or on the same side of the array) close to the inverters, if desired. With multiple strings terminating close together, the inverters can sit close to the terminations of multiple strings.
Some versions of FOG arrays resist wind loads of up to 194 mph without using any prior art methodologies illustrated in
In some versions, FOG systems disclosed in this document are mounted at a height, h, of less than 100, 75, 50, or 20 cm above grade on objects that extend into the ground less than one-half of the height. This is schematically illustrated in
Perimeter block 600 can be made of any convenient, low-cost material, such as concrete, green concrete, metal, plastic, rubber, recycled plastic, recycled rubber, or other material. Perimeter block 600 serves to retard the movement of modules 9 along the edges 12. In some versions, perimeter block 600 also directs surface water over the tops of modules 9, which reduces soil washout and module lifting caused by rising or flooding surface water. Additionally, causing surface water to flow over the tops of modules 9 has some benefits in keeping modules 9 clean. Perimeter block 600 is also useful in installations using corner brackets or other brackets.
In some versions, the FOG system mounts the solar panels directly to the earth without an intermediate structure between the modules and the earth itself.
Mesh cables 639 create a mesh network of flexible mechanical connections 1510 between adjacent solar modules 9, strings of modules, and rows of modules making up larger array 420. The mesh cables 639 and grade 215 align modules 9 in the X, Y, and Z axes creating a meshed array of modules 9 through frame holes 60. The nature and location of alignment holes 60 in frame 11 allow the system to align the top faces of module 9 with its surrounding modules. Flexible mechanical connections 1510 enable the array to follow the earth's natural contour or grade 215. Flexible mechanical connections 1510 help prevent damage to modules 9 from the differential settlement of soils that may occur over time within the boundary of array 420.
The mesh cable 639 results in a meshed array where every module 9 directly or indirectly connects to many other modules 9 in the array 420. The network limits the total vertical or horizontal shift that may occur through module expansion, contraction, and differential soil settlement over time. Modules 9 are constrained yet free-floating within the boundaries of array 420.
The arrangement of modules strung together with the mesh cable creates essentially a zero module-to-module row spacing REQUIREMENT as there will be no shading throughout the array due to low, Z-axis module-to-module variability. Additionally, the mesh cable 639 creates an array 420 with no parts or pieces to penetrate the earth's surface inside of the array 420. The interconnected mesh network of modules resists uplift forces through the combined weight of the solar array and its perimeter block 600, resulting in a flexible and abatable anchoring system. Mesh cable 639 can be constructed out of wire rope includes corrosion-resistant materials and is hidden beneath the solar panel surfaces. Other versions use non-metallic cable or rope, such as nylon or aramid material.
As discussed above, modules 9 and mesh cable 639 follow the contour of the ground (grade 215). These cables 639 maintain a module-to-module edge alignment. In some versions, cables 639 maintain modules 9 flat, such as flat enough for an autonomous cleaning robot to move from module to module. Array 420 may have rows with greater than 25 or 50 modules and columns having greater than 6, 17, 14, 29, or 50 modules. In some versions, mesh cable 639 lays diagonally across the array. In some versions, the mesh cable 639 extends along rows of modules, columns of modules, or both.
Perimeter blocks 600 line the array on at least one side in some versions.
In some versions, mesh cable 639 may be anchored at an end of, both ends of, one or more midpoints along, or one or more midpoints along and one or both ends of the mesh cable 639. For instance, the mesh cable can attach to perimeter blocks 600.
A further advantage of mounting the modules on the ground or just above the ground is that cooling from the backside of the modules' surface is easily accomplished. Cooling techniques can include, by way of non-limiting example, evaporative cooling, alternate high-emissivity coatings, the addition of air vents on the edge of the module frame, and the addition of various enhanced heat-transfer materials and or methods. Reducing the operating temperature by increasing cooling increases the modules' effective energy production rate. In addition, earth positioning avoids heating from indirect sunlight and ground exposed to sunlight. Also, the unheated ground beneath the modules is a heat sink. In some versions, the modules have a dark or heat-transmitting coating on their back or underside to promote radiant heat transfer to the ground or airspace beneath the modules.
A variety of techniques can accomplish ventilation of the backside. By way of non-limiting example, outlet vents can connect to one or more vertical stacks to use convection to remove warm air. Or fans can cool the modules as needed. Inlet vents can use separate supply tubing or louvers cut into frames 11. Most versions use passive cooling including some versions that use only passive cooling.
FOG systems facilitate more economical module cleaning. Robotic cleaning systems for operation on FOG systems are much simpler than such robotic systems for cleaning racked systems. Since FOG systems are substantially flat, cleaning FOG systems with autonomous robotic systems is far more economical than cleaning racked systems.
To facilitate robotic cleaning, some FOG versions used connectors or mesh cable 639 to minimize module-to-module z-axis variability. Another way to facilitate robotic cleaning is to provide bridges between separate module sections or separate module arrays. These bridges allow the robot to cross from one section or array to another.
While cleaning is important for FOG modules, using low-cost automated cleaning costs significantly less on FOG arrays than it does on rack-mounted arrays for a similar cleaning cadence. Non-cleaned arrays have soiling reductions for fixed-tilt (typically 6%) and trackers (typically 3.5%) arrays that are higher than cleaned FOG arrays (typically less than 1%).
In some versions, the AC power output of a FOG plant is intentionally limited for practical reasons, mostly related to the grid's power absorption rate. The excess power is either not used or applied to alternative uses such as energy storage. It is possible to use the additional energy to support the grid in volt-ampere reactive units (VARs) or other power functions other than direct increases in power output (MW). Alternatively, the excess power can be purchased as surplus power by the grid utility or transported across the grid for use at a remote location.
An economic advantage of the FOG arrangement of the modules results from the relative economics of the DC power generation components instead of the plant's total operating cost. The utility company that buys the power sets an upper AC limit. This limit depends on the utility company's power needs at the interconnection point of the plant and cannot be exceeded by contract or design. The available DC power from a FOG plant is greater than the available DC power from a tracker plant of similar AC capacity. This fact results from a difference in power plant design, function, and economics. The FOG plant has more available DC power because it uses more modules for the same AC size. The FOG plant has an intrinsic advantage over the tracker and fixed-tilt plant in that it can contain more DC as a percentage of the design AC output. The additional DC power in the power plant has value. This is true for any solar plant with a DC: AC ratio greater than 1.0. Since it cannot be used to deliver Real power to the grid (which would result in revenues for the power plant owner), it is maintained as Potential power, waiting to be dispatched. There are multiple ways to capture this value.
During periods of intermittent cloud cover, the clouds may only cover some modules. The rest of the modules produce full power. Potential power allows the plant to ride through lower light conditions from clouds while still delivering 100% of the AC power plant capacity allowed by the grid connection. The plant can ride through more significant or slower-moving clouds without dropping below 100% capacity if there is greater DC power.
The utility operator receiving real power from the power plant can use the Potential power to provide supplemental voltage and frequency regulation by adjusting the power factor from the connected inverters. Modern solar power operators sell this portion of the Potential power in VARs to the utility. The additional DC power of the earth-oriented plant brings additional VARs available to be sold compared to a typical plant of like AC capacity.
Batteries or other energy storage or conversion means can save the Potential DC power from the plant to sell as Real energy to the grid or for other valuable uses when the sun is unavailable. The additional DC power of the earth-oriented plant generates more sellable energy than a typical plant of like AC capacity.
An “invertor” is device that receives a DC input and outputs AC at any desired voltage or outputs DC at a voltage different from the DC input.
A “module” is the photovoltaic media, PV wire connections to the media, and any support, such as frames, that the module manufacturer adds to the media. Modules range in size from 100-850 watts and 1-4 m3.
“Array” is a grouping of multiple modules, some of which are filed modules. In some versions, an array has greater than 5, 10, 15, 20, 30, 40, 50, 60, 70, 80, 90, or 100 columns of modules. In these or other versions, an array has greater than 5, 10, 15, 20, 30, 40, 50, 60, 70, 80, 90, or 100 rows of modules. An array has greater than 50, 75, 100, 125, 150, 175, 200, 225, 250, 300, 350, 375, 400, 450, 500, 525, 600, 625, 700, 750, 800, 875, 900, 1000, 1050, 1200, 1225, 1250, 1350, 1400, 1500, 1600, 1750, 1800, 2000, 2100, 2250, 2400, 2450, 2500, 2700, 2800, 3000, 3150, 3200, 3500, 3600, 4000, 4200, 4500, 4800, 4900, 5000, 5400, 5600, 6000, 6300, 6400, 7000, 7200, 8000, 8100, 9000, 10000 modules in some versions In some versions, “FOG” refers to a group of greater than 50, 100, 200, 400, 600, 800, 1000, or 1500 modules in which at least 80 percent of the modules have at least one contact point, as defined below, that rests on the ground or rests on a contact surface of one or more structures, provided that the portion or portions of the structure or structures encompassed by the volume of space beneath and perpendicular to the contact surface is solid or constrains air movement. Module-to-module spacing for site-oriented systems can be much, much closer. In some versions, module-to-module spacing in a FOG system ranges from 0.1-300 mm, 10-200 mm, 1-50 mm, or 1-25 mm.
“Contiguous” or “adjacent” modules, rows, or columns means modules, rows, or columns having a spacing of less than 30, 20, 10, 5, 1 or 0.5 cm “Conterminous” means that each member of a group or grouping is next to at least one other member.
“No favored orientation” means that the array is oriented with respect to a geographic feature on the site, e.g., river, stream bed, canyon, hill, etc. In some embodiments, the array is not oriented with respect to the sun's direction. “Geographic feature” includes legal property lines but does not include latitude, longitude, or the orientation of impinging sunlight. Systems with no favored orientation are sometimes called earth or topography oriented. Azimuth independent means independent of the orientation of the sun with respect to the module's latitude.
In some versions, “contact points” are regions of a module that touch the ground or touch a contact surface. In some versions, “contact points” are regions of a module that touch the ground without intervening regular structure or are regions of a module that touch the ground without intervening manufactured structure.
“Contact surfaces” are portions of a structure that touch a contact point. In some versions, the volume perpendicular to the contact surface between the contact surface and the ground does not have free air. In some versions, an object that does not have “free air” is an object that does not contain constrained air. In some versions, a contact surface defines a starting point of a path that is continuous and ends at a point of the structure touching the ground and directly beneath the contact surface.
In some versions, the volume perpendicular to the contact surface between the contact surface and the ground constrains air movement. In some versions, “constrains air movement” means constrains lateral air movement. In some versions, an object that “constrains air movement” bounds a volume of air on at least two lateral sides. In some versions, “constrained air” is air constrained on at least two lateral sides in addition to the top and bottom.
For purposes of this disclosure and depending upon the exemplar, “utility-scale” means having one or more of the following characteristics: a total DC output of greater than 200, 300, 400, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1300, 1400, 1500, 1600, 1700, or 1800 V; or a total DC power output of greater than 100, 200, 500, 700, 1000, 2000 kW.
In some versions, “FOG” mounting means any flat mounting substantially parallel to the earth or ground that places the plane of the array within a short distance above the ground. In some versions, “flat” means horizontally flat and substantially parallel to the earth. In some versions, a “ground module” is a FOG module.
In some versions, “ground level” is the level of the ground immediately before module installation.
“Ground” or “native topography” is the surface of the site and includes material naturally present at the site and material added to the site by human activity at any time before the first module is placed. In some versions, “Ground” or “native topography” is the surface of the site and includes material naturally present at the site and irregularly shaped material added to the site by human activity at any time before placing the first module. In some versions, “Ground” or “native topography” is the surface of the site and includes material naturally present at the site and material added to the site by human activity at any time before placing the first module, provided that the largest dimension of 80% of the material is less than 20 cm.
“Structure” is any material added to the site or brought onto the site that occupies any of the space between a module and the ground and does not include manufacturer support. “Structure” is support for the module not installed by the panel manufacturer during production.
Perpendicular and parallel are defined with respect to the ground's local tangent plane.
“Plane of the array” is the average of the planes for each individual module in the array.
“Robotic cleaning device” is an air-pressure-based, a water-pressure-based, a vacuum-based, a brush-based, or a wiper-based device for cleaning modules.
“Autonomous” means performed without manual intervention or undertaken or carried out without any outside control. An “autonomous robotic device” is a robotic cleaning device that operates to clean modules without real-time human control. Sometimes an “autonomous robotic device” is used synonymously for a “fully autonomous cleaning robot”. An AI autonomous robotic device is an autonomous robotic device that contains hardware and software that observes its own cleaning performance and adjusts its performance algorithms based on those observations.
In some versions, “operates to clean modules” includes initiating a cleaning cycle.
A “cleaning cycle” is a complete cleaning of a section of modules from start to finish. In some versions, a cleaning cycle includes the robotic device leaving its resting pad or structure, traveling to a section of modules, cleaning each module of the section of modules, and traveling to another section of modules or returning to the resting pad or structure.
“Cleaning period” is 6, 12, 24, 36, 48, 60, 72, 84, 96, 108, 120, 132, or 144 hours.
“Module-to-module z-axis variability” or “module-to-module elevation difference”—is a measure of the largest elevation difference between the highest point at a module edge and the lowest point of an adjacent edge of an adjacent module. The “z-axis” extends from the module face and points substantially vertically.
In some versions, when used to describe an array, “smooth”, “smoothed”, “flat”, or “flattened” means smooth or flat enough or made smooth or flat enough such that the height difference or the module-to-module z-axis variability between adjacent modules is small enough that a fully autonomous cleaning robot can move from one module onto another. In some versions, the maximum module-to-module z-axis variability is less than 4, 3, 4, 1, or 0.5 inches. In some versions, when used to describe the ground, “smooth”, “smoothed”, “flat”, or “flattened” means smooth or flat enough or made smooth or flat enough such that the height difference or the module-to-module z-axis variability between adjacent modules in an array installed on the ground is small enough that a fully autonomous cleaning robot can move from one module onto another.
“Low module elevation” is defined as an elevation of a module that is low enough to prevent upward forces caused by air movement across the module from lifting a module from the array, whether the array comprises mechanical components to resist module lifting or not. In some versions, a low module elevation is defined as an elevation of a group of modules that is low enough that air-caused upward forces on the group are too small to lift the group. In some versions, low module elevation is an elevation of less than 100 cm, 0 to 90 cm, 0 to 80 cm, 0 to 70 cm, 0 to 60 cm, 0 to 50 cm, 0 to 40 cm, 0 to 30 cm, 0 to 20 centimeters, or 0 to 10 cm measured from the ground to a lower edge of the module or, in edge-less module systems, from the ground to the module surface.
“Intermediate distance” is defined as from 0-1 m, 0-70 cm, 0-60 cm, or 0-50 cm. “Short distance” is defined as 0-49.9 cm, 0-30 cm, 0-20 cm, or 0-10 cm.
“Mechanical stow functionality” is wind abatement functionality that changes the direction that a tracker-based system points the modules to minimize the effect of winds on the system. This is done to minimize the danger of high winds damaging the tracker or the installed modules.
“Extreme dampening functionality” is wind abatement functionality that dampens mechanical oscillations in a tracker-based system caused by high winds to minimize the danger that those winds will damage the tracker or the installed modules.
“Connectors” are structures that connect modules. In various versions, connectors can be mechanical connectors, electrical connectors or electrical interconnects, or both. “Electrical interconnects” are DC electrical connections between modules.
“Flexible connections” or “flexibly connected” are or describe connections made with rigid or non-rigid connectors that allow the angle between a plane of a module and of an adjacent module to vary without breaking the connection.
“Joints” are any permanent or semi-permanent connection between the joined components.
A “high DC: AC” voltage ratio is greater than 1.0-2, 1.1-1.9, 1.2-1.8, or 1.3-1.7.
This application is a continuation-in-part of U.S. patent application Ser. No. 16/682,517, filed Nov. 13, 2019, pending; application Ser. No. 16/682,517 claims priority to Provisional Patent Application No. 62/903,369, filed Sep. 20, 2019. Both applications are incorporated into this document by this reference.
Number | Date | Country | |
---|---|---|---|
62903369 | Sep 2019 | US |
Number | Date | Country | |
---|---|---|---|
Parent | 16682517 | Nov 2019 | US |
Child | 18307557 | US |