Polypeptides and biosynthetic pathways

FIELD

[0002] This disclosure provides polypeptides and biosynthetic pathways that are useful in the production of indole-3-pyruvate, 2-hydroxy 2-(indol-3ylmethyl)-4-keto glutaric acid (MP) and/or monatin.

BACKGROUND

[0003] Indole Pyruvate.

[0004] Indole-3-pyruvate is a strong antioxidant that is believed to counter act oxidative stress in tissues with high oxygen concentrations (Politi et al. “Recent advances in Tryptophan Research”, edited by G. A. Filippini et al. Plenum Press, New York, 1996, pp 291-8). Indole pyruvate also is an intermediate in a pathway to produce indole-acetic acid (IAA), the primary plant growth hormone auxin (diffusible growth promoting factor). IAA is active in submicrogram amounts in a range of physiological processes including apical dominance, tropisms, shoot elongation, induction of cambial cell division, and root initiation. Synthetic auxins are used in horticulture to induce rooting and to promote the set and development of fruit. At high concentrations the synthetic auxins are effective herbicides against broad-leafed plants. Natural auxins produced by fermentation may be considered more environmentally friendly than chemically produced herbicides. Growth regulators had world sales in 1999 of 0.4 billion pounds (1.4 billion U.S. dollars).

[0005] Some examples of patents on indole acetic acid and derivatives thereof include: U.S. Pat. No. 5,843,782 Micropropagation of rose plants, auxin used in culture medium and U.S. Pat. No. 5,952,231. Micropropagation of rose plants.

[0006] In addition to plant related utilities, indole acetic acid is useful in pharmaceutical applications. For example, U.S. Pat. No. 5,173,497 “Method of preparing alpha-oxopyrrolo[2,3-B]indole acetic acids and derivatives” proposes the use of these compounds in the treatment of memory impairment such as that associated with Alzheimer's disease and senile dementia. The mechanism proposed in U.S. Pat. No. 5,173,497 is that these compounds inhibit the polypeptide acetylcholinesterase and increase acetylcholine levels in the brain.

[0007] Indole-3-carbinol is produced from indole-3-acetic acid by peroxidase-catalyzed oxidation, and can easily be converted into diindolylmethane. Both compounds are reported to eliminate toxins and promote the production of hormones beneficial to women's health.

[0008] Tryptophan Derivatives

[0009] Chlorinated D-tryptophan has been identified as a nonnutritive sweetener, and there is increasing interest in pursuing other derivatives as well. Monatin is a natural sweetener that is similar in composition to the amino acid tryptophan. It can be extracted from the bark of the roots of the South African shrub, Sclerochiton ilicifolius, and has promise in the food and beverage industry as a high-intensity sweetener. Some examples of patents on monatin include: U.S. Pat. No. 5,994,559 Synthesis of monatin-A high intensity natural sweetener, U.S. Pat. No. 4,975,298 3-(1-amino-1,3-dicarboxy-3-hydroxy-but-4-yl)-indole compounds, U.S. Pat. No. 5,128,164 Composition for human consumption containing 3-(1-amino-1,3-dicarboxy-3-hydroxy-but-4-yl)-indole compounds; and U.S. Pat. No. 5,128,482 Process for the production of 3-1(1-amino-1,3-dicarboxy-3-hydroxy-but-4-yl) indole.

[0010] Some of the precursors of monatin described here can also be useful as synthetic sweeteners or as intermediates in the synthesis of monatin derivatives.

SUMMARY

[0011] The disclosure provides several biosynthetic routes for making monatin from glucose, tryptophan, indole-3-lactic acid, and/or through monatin precursors such as indole-3-pyruvate and 2-hydroxy 2-(indole-3-ylmethyl)-4-keto glutaric acid. Polypeptides and nucleic acid sequences that can be used to make monatin, indole-3-pyruvate, and 2-hydroxy 2-(indole-3-ylmethyl)-4-keto glutaric acid are disclosed.

[0012] Monatin can be produced through indole-3-pyruvate, 2-hydroxy 2-(indole-3-ylmethyl)-4-keto glutaric acid (monatin precursor, MP, the alpha-keto form of monatin), indole-3-lactic acid, tryptophan, and/or glucose (FIG. 1). Methods of producing or making monatin or its intermediates shown in FIGS. 1-3 and 11-13 that involve converting a substrate to a first product, and then converting the first product to a second product, and so on, until the desired end product is created, are disclosed.

[0013] FIGS. 1-3 and 11-13 show potential intermediate products and end products in boxes. For example, a conversion from one product to another, such as glucose to tryptophan, tryptophan to indole-3-pyruvate, indole-3-pyruvate to MP, MP to monatin, or indole-3-lactic acid (indole-lactate) to indole-3-pyruvate, can be performed by using these methods. These conversions can be facilitated chemically or biologically. The term “convert” refers to the use of either chemical means or polypeptides in a reaction which changes a first intermediate to a second intermediate. The term “chemical conversion” refers to reactions that are not actively facilitated by polypeptides. The term “biological conversion” refers to reactions that are actively facilitated by polypeptides. Conversions can take place in vivo or in vitro. When biological conversions are used the polypeptides and/or cells can be immobilized on supports such as by chemical attachment on polymer supports. The conversion can be accomplished using any reactor known to one of ordinary skill in the art, for example in a batch or a continuous reactor.

[0014] Methods are also provided that include contacting a first polypeptide with a substrate and making a first product, and then contacting the first product created with a second polypeptide and creating a second product, and then contacting the second product created with a third polypeptide and creating a third product, for example monatin. The polypeptides used and the products produced are shown in FIGS. 1-3 and 11-13.

[0015] Polypeptides, and their coding sequences, that can be used to perform the conversions shown in FIGS. 1-3 and 11-13 are disclosed. In some examples, polypeptides having one or more point mutations that allow the substrate specificity and/or activity of the polypeptides to be modified, are used to make monatin.

[0016] Isolated and recombinant cells that produce monatin are disclosed. These cells can be any cell, such as a plant, animal, bacterial, yeast, algal, archaeal, or fungal cell.

[0017] In a particular example, the disclosed cells include one or more of the following activities, for example two or more or three or more of the following activities: tryptophan aminotransferase (EC 2.6.1.27), tyrosine (aromatic) aminotransferase (EC 2.6.1.5), multiple substrate aminotransferase (EC 2.6.1.-), aspartate aminotransferase (EC 2.6.1.1), tryptophan dehydrogenase (EC 1.4.1.19), tryptophan-phenylpyruvate transaminase (EC 2.6.1.28), L-amino acid oxidase (EC 1.4.3.2), tryptophan oxidase (no EC number, Hadar et al., J. Bacteriol 125:1096-1104, 1976 and Furuya et al., Biosci Biotechnol Biochem 64:1486-93, 2000), D-amino acid dehydrogenase (EC 1.4.99.1), D-amino acid oxidase (EC 1.4.3.3), D-alanine aminotransferase (EC 2.6.1.21), synthase/lyase (EC 4.1.3.-), such as 4-hydroxy-4-methyl-2-oxoglutarate aldolase (EC 4.1.3.17) or 4-hydroxy-2-oxoglutarate aldolase (EC 4.1.3.16), synthase/lyase (4.1.2.-), D-tryptophan aminotransferase (Kohiba and Mito, Proceedings of the 8th International Symposium on Vitamin B6 and Carbonyl Catalysis, Osaka, Japan 1990), phenylalanine dehydrogenase (EC 1.4.1.20) and/or glutamate dehydrogenase (EC 1.4.1.2, 1.4.1.3, 1.4.1.4).

[0018] In another example, cells include one or more, for example two or more, or three or more, of the following activities: indolelactate dehydrogenase (EC 1.1.1.110), R-4-hydroxyphenyllactate dehydrogenase (EC 1.1.1.222), 3-(4)-hydroxyphenylpyruvate reductase (EC 1.1.1.237), lactate dehydrogenase (EC 1.1.1.27, 1.1.1.28, 1.1.2.3), (3-imidazol-5-yl) lactate dehydrogenase (EC 1.1.1.111), lactate oxidase (EC 1.1.3.-), synthase/lyase (4.1.3.-) such as 4-hydroxy-4-methyl-2-oxoglutarate aldolase (EC 4.1.3.17) or 4-hydroxy-2-oxoglutarate aldolase (EC 4.1.3.16), synthase/lyase (4.1.2.-), tryptophan dehydrogenase (EC 1.4.1.19), tryptophan-phenylpyruvate transaminase (EC 2.6.1.28), tryptophan aminotransferase (EC 2.6.1.27), tyrosine (aromatic) aminotransferase (EC 2.6.1.5), multiple substrate aminotransferase (EC 2.6.1.-), aspartate aminotransferase (EC 2.6.1.1), phenylalanine dehydrogenase (EC 1.4.1.20), glutamate dehydrogenase (EC 1.4.1.2, 1.4.1.3, 1.4.1.4), D-amino acid dehydrogenase (EC 1.4.99.1), D-tryptophan aminotransferase, and/or D-alanine aminotransferase (EC 2.6.1.21).

[0019] In addition, the disclosed cells can include one or more of the following activities, for example two or more or three or more of the following activities: tryptophan aminotransferase (EC 2.6.1.27), tyrosine (aromatic) aminotransferase (EC 2.6.1.5), multiple substrate aminotransferase (EC 2.6.1.-), aspartate aminotransferase (EC 2.6.1.1), tryptophan dehydrogenase (EC 1.4.1.19), tryptophan-phenylpyruvate transaminase (EC 2.6.1.28), L-amino acid oxidase (EC 1.4.3.2), tryptophan oxidase (no EC number), D-amino acid dehydrogenase (EC 1.4.99.1), D-amino acid oxidase (EC 1.4.3.3), D-alanine aminotransferase (EC 2.6.1.21), indolelactate dehydrogenase (EC 1.1.1.110), R-4-hydroxyphenyllactate dehydrogenase (EC 1.1.1.222), 3-(4)-hydroxyphenylpyruvate reductase (EC 1.1.1.237), lactate dehydrogenase (EC 1.1.1.27, 1.1.1.28, 1.1.2.3), (3-imidazol-5-yl) lactate dehydrogenase (EC 1.1.1.111), lactate oxidase (EC 1.1.3.-), synthase/lyase (4.1.3.-) such as 4-hydroxy-4-methyl-2-oxoglutarate aldolase (EC 4.1.3.17) or 4-hydroxy-2-oxoglutarate aldolase (EC 4.1.3.16), synthase/lyase (4.1.2.-), glutamate dehydrogenase (EC 1.4.1.2, 1.4.1.3, 1.4.1.4), phenylalanine dehydrogenase (EC 1.4.1.20), and/or D-tryptophan aminotransferase.

[0020] Monatin can be produced by a method that includes contacting tryptophan and/or indole-3-lactic acid with a first polypeptide, wherein the first polypeptide converts tryptophan and/or indole-3-lactic acid to indole-3-pyruvate (either the D or the L form of tryptophan or indole-3-lactic acid can be used as the substrate that is converted to indole-3-pyruvate; one of skill in the art will appreciate that the polypeptides chosen for this step ideally exhibit the appropriate specificity), contacting the resulting indole-3-pyruvate with a second polypeptide, wherein the second polypeptide converts the indole-3-pyruvate to 2-hydroxy 2-(indol-3-ylmethyl)-4-keto glutaric acid (MP), and contacting the MP with a third polypeptide, wherein the third polypeptide converts MP to monatin. Exemplary polypeptides that can be used for these conversions are shown in FIGS. 2 and 3.

[0021] Another aspect of the invention provides compositions such as MP, cells that contain at least two polypeptides, or sometimes at least three or at least four polypeptides, that are encoded on at least one exogenous nucleic acid sequence.

[0022] These and other aspects of the disclosure are apparent from the following detailed description and illustrative examples.

BRIEF DESCRIPTION OF THE FIGURES

[0023]
FIG. 1 shows biosynthetic pathways used to produce monatin and/or indole-3-pyruvate. One pathway produces indole-3-pyruvate via tryptophan, while another produces indole-3-pyruvate via indole-3-lactic acid. Monatin is subsequently produced via a 2-hydroxy 2-(indol-3ylmethyl)-4-keto glutaric acid (MP) intermediate.

[0024] Compounds shown in boxes are substrates and products produced in the biosynthetic pathways.

[0025] Compositions adjacent to the arrows are cofactors, or reactants that can be used during the conversion of a substrate to a product. The cofactor or reactant used will depend upon the polypeptide used for the particular step of the biosynthetic pathway. The cofactor PLP (pyridoxal 5′-phosphate) can catalyze reactions independent of a polypeptide, and therefore, merely providing PLP can allow for the progression from substrate to product.

[0026]
FIG. 2 is a more detailed diagram of the biosynthetic pathway that utilizes the MP intermediate. The substrates for each step in the pathways are shown in boxes. The polypeptides allowing for the conversion between substrates are listed adjacent to the arrows between the substrates. Each polypeptide is described by its common name and an enzymatic class (EC) number.

[0027]
FIG. 3 shows a more detailed diagram of the biosynthetic pathway of the conversion of indole-3-lactic acid to indole-3-pyruvate. The substrates are shown in boxes, and the polypeptides allowing for the conversion between the substrates are listed adjacent to the arrow between the substrates. Each polypeptide is described by its common name and an enzymatic class (EC) number.

[0028]
FIG. 4 shows one possible reaction for making MP via chemical means.

[0029]
FIGS. 5A and 5B are chromatograms showing the LC/MS identification of monatin produced enzymatically.

[0030]
FIG. 6 is an electrospray mass spectrum of enzymatically synthesized monatin.

[0031]
FIGS. 7A and 7B show chromatograms of the LC/MS/MS daughter ion analyses of monatin produced in an enzymatic mixture.

[0032]
FIG. 8 is a chromatogram showing the high resolution mass measurement of monatin produced enzymatically.

[0033] FIGS. 9A-9C are chromatograms showing the chiral separation of (A) R-tryptophan, (B) S-tryptophan, and (C) monatin produced enzymatically.

[0034]
FIG. 10 is a bar graph showing the relative amount of monatin produced in bacterial cells following IPTG induction. The (−) indicates a lack of substrate addition (no tryptophan or pyruvate was added).

[0035] FIGS. 11-12 are schematic diagrams showing pathways used to increase the yield of monatin produced from tryptophan or indole-3-pyruvate.

[0036]
FIG. 13 is a schematic diagram showing a pathway which can be used to increase the yield of monatin produced from tryptophan or indole-3-pyruvate.

SEQUENCE LISTING

[0037] The nucleic and amino acid sequences listed in the accompanying sequence listing are shown using standard letter abbreviations for nucleotide bases, and three-letter code for amino acids. Only one strand of each nucleic acid sequence is shown, but the complementary strand is understood to be included by any reference to the displayed strand.

[0038] SEQ ID NOS: 1 and 2 show the nucleic acid and amino acid sequences of an aminotransferase from Sinorhizobium meliloti, respectively (tatA gene, called a tyrosine or aromatic aminotransferase in literature).

[0039] SEQ ID NOS: 3 and 4 show the nucleic acid and amino acid sequences of a tyrosine aminotransferase from Rhodobacter sphaeroides (2.4.1), respectively (by homology with tatA (SEQ ID NOS: 1 and 2) predicted to be an “aspartate aminotransferase” by genomics software).

[0040] SEQ ID NOS: 5 and 6 show the nucleic acid and amino acid sequences of an aminotransferase from Rhodobacter sphaeroides (35053), respectively (novel, cloned based on 2.4.1 sequence SEQ ID NOS 3 and 4).

[0041] SEQ ID NOS: 7 and 8 show the nucleic acid and amino acid sequences of a broad substrate aminotransferase (bsat) from Leishmania major, respectively.

[0042] SEQ ID NOS: 9 and 10 show the nucleic acid and amino acid sequences of an aromatic aminotransferase (araT ) from Bacillus subtilis, respectively.

[0043] SEQ ID NOS: 11 and 12 show novel nucleic acid and amino acid sequences of an aromatic aminotransferase (araT) from Lactobacillus amylovorus, respectively (by homology identified as an aromatic aminotransferase).

[0044] SEQ ID NOS: 13 and 14 show the nucleic acid and amino acid sequences of a multiple substrate aminotransferase (msa) from R. sphaeroides (35053), respectively (identified as a multiple substrate aminotransferase by homology to Accession No. AAAE01000093.1, bp 14743-16155 and Accession No. ZP00005082.1).

[0045] SEQ ID NOS: 15 and 16 show primers used to clone the B. subtilis D-alanine aminotransferase (dat) sequence.

[0046] SEQ ID NOS: 17 and 18 show primers used to clone the S. meliloti tatA sequence.

[0047] SEQ ID NOS: 19 and 20 show primers used to clone the B. subtilis araT aminotransferase sequence.

[0048] SEQ ID NOS: 21 and 22 show primers used to clone the Rhodobacter sphaeroides (2.4.1 and 35053) multiple substrate aminotransferase sequences.

[0049] SEQ ID NOS: 23 and 24 show primers used to clone the Leishmania major bsat sequence.

[0050] SEQ ID NOS: 25 and 26 show primers used to clone the Lactobacillus amylovorus araT sequence.

[0051] SEQ ID NOS: 27 and 28 show primers used to clone the R. sphaeroides tatA sequences (both 2.4.1 and 35053).

[0052] SEQ ID NOS: 29 and 30 show primers used to clone the E. coli aspC sequence (gene sequence Genbank Accession No.: AE000195.1, protein sequence Genbank Accession No.:AAC74014.1).

[0053] SEQ ID NOS: 31 and 32 show the nucleic acid and amino acid sequences of aromatic aminotransferase (tyrB) from E. coli, respectively.

[0054] SEQ ID NOS: 33 and 34 show primers used to clone the E. coli tyrB sequence.

[0055] SEQ ID NOS: 35-40 show primers used to clone polypeptides with 4-hydroxy-2-oxoglutarate aldolase (KHG) (EC 4.1.3.16) activity.

[0056] SEQ ID NOS: 41 and 42 show the nucleic acid sequences of tryptophanase (tna) from E. coli and tyrosine phenol-lyase (tpl) from Citrobacter freundii, coding for proteins P00913 (GI:401195) and P31013 (GI:401201), respectively.

[0057] SEQ ID NOS: 43-46 show primers used to clone tryptophanase polypeptides and β-tyrosinase (tyrosine phenol-lyase) polypeptides.

[0058] SEQ ID NOS: 47-54 show primers used to mutate tryptophanase polypeptides and β-tyrosinase polypeptides.

[0059] SEQ ID NOS: 55-64 show primers used to clone polypeptides with 4-hydroxy-4-methyl-2-oxoglutarate aldolase (EC 4.1.3.17) activity.

[0060] SEQ ID NOS: 65 and 66 show the nucleic acid and amino acid sequences of 4-hydroxy-4-methyl-2-oxoglutarate aldolase (proA) from C. testosteroni, respectively.

[0061] SEQ ID NOS: 67-68 show primers used to clone C. testosteroni 4-hydroxy-4-methyl-2-oxoglutarate aldolase (proA) in an operon with E. coli aspC in pET30 Xa/LIC.

[0062] SEQ ID NOS: 69-72 show primers used to clone E. coli aspC and C. testosteroni proA in pESC-his.

[0063] SEQ ID NOS: 73-74 show sequences added to the 5′ end of primers used to clone the genes disclosed herein.

DETAILED DESCRIPTION OF SEVERAL EMBODIMENTS

[0064] Abbreviations and Terms

[0065] The following explanations of terms and methods are provided to better describe the present disclosure and to guide those of ordinary skill in the art in the practice of the present disclosure. As used herein, “comprising” means “including” and the singular forms “a” or “an” or “the” include plural references unless the context clearly dictates otherwise. For example, reference to “comprising a protein” includes one or a plurality of such proteins, and reference to “comprising the cell” includes reference to one or more cells and equivalents thereof known to those skilled in the art, and so forth.

[0066] Unless explained otherwise, all technical and scientific terms used herein have the same meaning as commonly understood to one of ordinary skill in the art to which this disclosure belongs. Although methods and materials similar or equivalent to those described herein can be used in the practice or testing of the present disclosure, suitable methods and materials are described below. The materials, methods, and examples are illustrative only and not intended to be limiting. Other features and advantages of the disclosure are apparent from the following detailed description and the claims.

[0067] cDNA (complementary DNA): A piece of DNA lacking internal, non-coding segments (introns) and regulatory sequences which determine transcription. cDNA can be synthesized in the laboratory by reverse transcription from messenger RNA extracted from cells.

[0068] Conservative substitution: One or more amino acid substitutions (for example 2, 5, or 10 residues) for amino acid residues having similar biochemical properties. Typically, conservative substitutions have little to no impact on the activity of a resulting polypeptide. For example, ideally, a tryptophan aminotransferase polypeptide including one or more conservative substitutions retains tryptophan aminotransferase activity. A polypeptide can be produced to contain one or more conservative substitutions by manipulating the nucleotide sequence that encodes that polypeptide using, for example, standard procedures such as site-directed mutagenesis or PCR.

[0069] Substitutional variants are those in which at least one residue in the amino acid sequence has been removed and a different residue inserted in its place. Examples of amino acids which may be substituted for an original amino acid in a protein and which are regarded as conservative substitutions include: Ala substituted with ser or thr; arg substituted with gin, his, or lys; asn substituted with glu, gin, lys, his, asp; asp substituted with asn, glu, or gin; cys substituted with ser or ala; gin substituted with asn, glu, lys, his, asp, or arg; glu substituted with asn, gin lys, or asp; gly substituted with pro; his substituted with asn, lys, gin, arg, tyr; ile substituted with leu, met, val, phe; leu substituted with ile, met, val, phe; lys substituted with asn, glu, gin, his, arg; met substituted with ile, leu, val, phe; phe substituted with trp, tyr, met, ile, or leu; ser substituted with thr, ala; thr substituted with ser or ala; trp substituted with phe, tyr; tyr substituted with his, phe, or trp; and val substituted with met, ile, leu.

[0070] Further information about conservative substitutions can be found in, among other locations, Ben-Bassat et al., (J. Bacteriol. 169:751-7, 1987), O'Regan et al., (Gene 77:237-51, 1989), Sahin-Toth et al., (Protein Sci. 3:240-7, 1994), Hochuli et al., (Bio/Technology 6:1321-5, 1988), WO 00/67796 (Curd et al.) and in standard textbooks of genetics and molecular biology.

[0071] Exogenous: The term “exogenous” as used herein with reference to nucleic acid and a particular cell refers to any nucleic acid that does not originate from that particular cell as found in nature. Thus, non-naturally-occurring nucleic acid is considered to be exogenous to a cell once introduced into the cell. Nucleic acid that is naturally-occurring also can be exogenous to a particular cell. For example, an entire chromosome isolated from a cell of person X is an exogenous nucleic acid with respect to a cell of person Y once that chromosome is introduced into Y's cell.

[0072] Functionally Equivalent: Having an equivalent function. In the context of an enzyme, functionally equivalent molecules include different molecules that retain the function of the enzyme. For example, functional equivalents can be provided by sequence alterations in an enzyme sequence, wherein the peptide with one or more sequence alterations retains a function of the unaltered peptide, such that it retains its enzymatic activity. In a particular example, a tryptophan aminotransferase functional equivalent retains the ability to convert tryptophan to indole-3-pyruvate.

[0073] Examples of sequence alterations include, but are not limited to, conservative substitutions, deletions, mutations, frameshifts, and insertions. In one example, a given polypeptide binds an antibody, and a functional equivalent is a polypeptide that binds the same antibody. Thus a functional equivalent includes peptides that have the same binding specificity as a polypeptide, and that can be used as a reagent in place of the polypeptide. In one example a functional equivalent includes a polypeptide wherein the binding sequence is discontinuous, wherein the antibody binds a linear epitope. Thus, if the peptide sequence is MPELANDLGL (amino acids 1-10 of SEQ ID NO: 12) a functional equivalent includes discontinuous epitopes, that can appear as follows (**=any number of intervening amino acids): NH2-**-M**P**E**L**A**N**D**L**G**L-COOH. In this example, the polypeptide is functionally equivalent to amino acids 1-10 of SEQ ID NO: 12 if the three dimensional structure of the polypeptide is such that it can bind a monoclonal antibody that binds amino acids 1-10 of SEQ ID NO: 12.

[0074] Hybridization: The term “hybridization” as used herein refers to a method of testing for complementarity in the nucleotide sequence of two nucleic acid molecules, based on the ability of complementary single-stranded DNA and/or RNA to form a duplex molecule. Nucleic acid hybridization techniques can be used to obtain an isolated nucleic acid within the scope of the disclosure. Briefly, any nucleic acid having some homology to a sequence set forth in SEQ ID NO: 11 can be used as a probe to identify a similar nucleic acid by hybridization under conditions of moderate to high stringency. Once identified, the nucleic acid then can be purified, sequenced, and analyzed to determine whether it is within the scope of the present disclosure.

[0075] Hybridization can be done by Southern or Northern analysis to identify a DNA or RNA sequence, respectively, that hybridizes to a probe. The probe can be labeled with a biotin, digoxygenin, a polypeptide, or a radioisotope such as 32P. The DNA or RNA to be analyzed can be electrophoretically separated on an agarose or polyacrylamide gel, transferred to nitrocellulose, nylon, or other suitable membrane, and hybridized with the probe using standard techniques well known in the art such as those described in sections 7.39-7.52 of Sambrook et al., (1989) Molecular Cloning, second edition, Cold Spring Harbor Laboratory, Plainview, N.Y. Typically, a probe is at least about 20 nucleotides in length. For example, a probe corresponding to a contiguous 20 nucleotide sequence set forth in SEQ ID NO: 11 can be used to identify an identical or similar nucleic acid. In addition, probes longer or shorter than 20 nucleotides can be used.

[0076] The disclosure also provides isolated nucleic acid sequences that are at least about 12 bases in length (e.g., at least about 13, 14, 15, 16, 17, 18, 19, 20, 25, 30, 40, 50, 60, 100, 250, 500, 750, 1000, 1500, 2000, 3000, 4000, or 5000 bases in length) and hybridize, under hybridization conditions, to the sense or antisense strand of a nucleic acid having the sequence set forth in SEQ ID NO: 11. The hybridization conditions can be moderately or highly stringent hybridization conditions.

[0077] For the purpose of this disclosure, moderately stringent hybridization conditions mean the hybridization is performed at about 42° C. in a hybridization solution containing 25 mM KPO4 (pH 7.4), 5×SSC, 5× Denhart's solution, 50 μg/mL denatured, sonicated salmon sperm DNA, 50% formamide, 10% Dextran sulfate, and 1-15 ng/mL probe (about 5×107 cpm/μg), while the washes are performed at about 50° C. with a wash solution containing 2×SSC and 0.1% sodium dodecyl sulfate.

[0078] Highly stringent hybridization conditions mean the hybridization is performed at about 42° C. in a hybridization solution containing 25 mM KPO4 (pH 7.4), 5×SSC, 5× Denhart's solution, 50 μg/mL denatured, sonicated salmon sperm DNA, 50% formamide, 10% Dextran sulfate, and 1-15 ng/mL probe (about 5×107 cpm/μg), while the washes are performed at about 65° C. with a wash solution containing 0.2×SSC and 0.1% sodium dodecyl sulfate.

[0079] Isolated: The term “isolated” as used herein with reference to nucleic acid refers to a naturally-occurring nucleic acid that is not immediately contiguous with both of the sequences with which it is immediately contiguous (one on the 5′ end and one on the 3′ end) in the naturally-occurring genome of the organism from which it is derived. For example, an isolated nucleic acid can be, without limitation, a recombinant DNA molecule of any length, provided one of the nucleic acid sequences normally found immediately flanking that recombinant DNA molecule in a naturally-occurring genome is removed or absent. Thus, an isolated nucleic acid includes, without limitation, a recombinant DNA that exists as a separate molecule (e.g., a cDNA or a genomic DNA fragment produced by PCR or restriction endonuclease treatment) independent of other sequences as well as recombinant DNA that is incorporated into a vector, an autonomously replicating plasmid, a virus (e.g., a retrovirus, adenovirus, or herpes virus), or into the genomic DNA of a prokaryote or eukaryote. In addition, an isolated nucleic acid can include a recombinant DNA molecule that is part of a hybrid or fusion nucleic acid sequence.

[0080] The term “isolated” as used herein with reference to nucleic acid also includes any non-naturally-occurring nucleic acid since non-naturally-occurring nucleic acid sequences are not found in nature and do not have immediately contiguous sequences in a naturally-occurring genome. For example, non-naturally-occurring nucleic acid such as an engineered nucleic acid is considered to be isolated nucleic acid. Engineered nucleic acid can be made using common molecular cloning or chemical nucleic acid synthesis techniques. Isolated non-naturally-occurring nucleic acid can be independent of other sequences, or incorporated into a vector, an autonomously replicating plasmid, a virus (e.g., a retrovirus, adenovirus, or herpes virus), or the genomic DNA of a prokaryote or eukaryote. In addition, a non-naturally-occurring nucleic acid can include a nucleic acid molecule that is part of a hybrid or fusion nucleic acid sequence.

[0081] It will be apparent to those of skill in the art that a nucleic acid existing among hundreds to millions of other nucleic acid molecules within, for example, cDNA or genomic libraries, or gel slices containing a genomic DNA restriction digest is not to be considered an isolated nucleic acid.

[0082] Nucleic acid: The term “nucleic acid” as used herein encompasses both RNA and DNA including, without limitation, cDNA, genomic DNA, and synthetic (e.g., chemically synthesized) DNA. The nucleic acid can be double-stranded or single-stranded. Where single-stranded, the nucleic acid can be the sense strand or the antisense strand. In addition, nucleic acid can be circular or linear.

[0083] Operably linked: A first nucleic acid sequence is “operably linked” with a second nucleic acid sequence whenever the first nucleic acid sequence is placed in a functional relationship with the second nucleic acid sequence. For instance, a promoter is operably linked to a coding sequence if the promoter affects the transcription of the coding sequence. Generally, operably linked DNA sequences are contiguous and, where necessary to join two polypeptide-coding regions, in the same reading frame.

[0084] Peptide Modifications: The present disclosure includes enzymes, as well as synthetic embodiments thereof. In addition, analogues (non-peptide organic molecules), derivatives (chemically functionalized peptide molecules obtained starting with the disclosed peptide sequences) and variants (homologs) having the desired enzymatic activity can be utilized in the methods described herein. The peptides disclosed herein include a sequence of amino acids, that can be either L- and/or D-amino acids, naturally occurring and otherwise.

[0085] Peptides can be modified by a variety of chemical techniques to produce derivatives having essentially the same activity as the unmodified peptides, and optionally having other desirable properties. For example, carboxylic acid groups of the protein, whether carboxyl-terminal or side chain, may be provided in the form of a salt of a pharmaceutically-acceptable cation or esterified to form a C1-C16 ester, or converted to an amide of formula NR1R2 wherein R1 and R2 are each independently H or C1-C16 alkyl, or combined to form a heterocyclic ring, such as a 5- or 6-membered ring. Amino groups of the peptide, whether amino-terminal or side chain, may be in the form of a pharmaceutically-acceptable acid addition salt, such as the HCl, HBr, acetic, benzoic, toluene sulfonic, maleic, tartaric and other organic salts, or may be modified to C1-C16 alkyl or dialkyl amino or further converted to an amide.

[0086] Hydroxyl groups of the peptide side chains may be converted to C1-C16 alkoxy or to a C1-C16 ester using well-recognized techniques. Phenyl and phenolic rings of the peptide side chains may be substituted with one or more halogen atoms, such as F, Cl, Br or I, or with C1-C16 alkyl, C1-C16 alkoxy, carboxylic acids and esters thereof, or amides of such carboxylic acids. Methylene groups of the peptide side chains can be extended to homologous C2-C4 alkylenes. Thiols can be protected with any one of a number of well-recognized protecting groups, such as acetamide groups. Those skilled in the art will also recognize methods for introducing cyclic structures into the peptides of this disclosure to select and provide conformational constraints to the structure that result in enhanced stability. For example, a C- or N-terminal cysteine can be added to the peptide, so that when oxidized the peptide will contain a disulfide bond, generating a cyclic peptide. Other peptide cyclizing methods include the formation of thioethers and carboxyl- and amino-terminal amides and esters.

[0087] Peptidomimetic and organomimetic embodiments are also within the scope of the present disclosure, whereby the three-dimensional arrangement of the chemical constituents of such peptido- and organomimetics mimic the three-dimensional arrangement of the peptide backbone and component amino acid side chains, resulting in such peptido- and organomimetics of the proteins of this disclosure having detectable enzyme activity. For computer modeling applications, a pharmacophore is an idealized, three-dimensional definition of the structural requirements for biological activity. Peptido- and organomimetics can be designed to fit each pharmacophore with current computer modeling software (using computer assisted drug design or CADD). See Walters, “Computer-Assisted Modeling of Drugs”, in Klegerman & Groves (eds.), Pharmaceutical Biotechnology, 1993, Interpharm Press: Buffalo Grove, Ill., pp. 165-74 and Ch. 102 in Munson (ed.), Principles of Pharmacology, 1995, Chapman & Hall, for descriptions of techniques used in CADD. Also included within the scope of the disclosure are mimetics prepared using such techniques. In one example, a mimetic mimics the enzyme activity generated by an enzyme or a variant, fragment, or fusion thereof.

[0088] Probes and primers: Nucleic acid probes and primers can be prepared readily based on the amino acid sequences and nucleic acid sequences provided herein. A “probe” includes an isolated nucleic acid containing a detectable label or reporter molecule. Exemplary labels include, but are not limited to, radioactive isotopes, ligands, chemiluminescent agents, and polypeptides. Methods for labeling and guidance in the choice of labels appropriate for various purposes are discussed in, for example, Sambrook et al. (ed.), Molecular Cloning: A Laboratory Manual 2nd ed., vol. 1-3, Cold Spring Harbor Laboratory Press, Cold Spring Harbor, N.Y., 1989, and Ausubel et al. (ed.) Current Protocols in Molecular Biology, Greene Publishing and Wiley-Interscience, New York (with periodic updates), 1987.

[0089] “Primers” are typically nucleic acid molecules having ten or more nucleotides (e.g., nucleic acid molecules having between about 10 nucleotides and about 100 nucleotides). A primer can be annealed to a complementary target nucleic acid strand by nucleic acid hybridization to form a hybrid between the primer and the target nucleic acid strand, and then extended along the target nucleic acid strand by, for example, a DNA polymerase polypeptide. Primer pairs can be used for amplification of a nucleic acid sequence, for example, by the polymerase chain reaction (PCR) or other nucleic-acid amplification methods known in the art.

[0090] Methods for preparing and using probes and primers are described, for example, in references such as Sambrook et al. (ed.), Molecular Cloning: A Laboratory Manual, 2nd ed., vol. 1-3, Cold Spring Harbor Laboratory Press, Cold Spring Harbor, N.Y., 1989; Ausubel et al. (ed.), Current Protocols in Molecular Biology, Greene Publishing and Wiley-Interscience, New York (with periodic updates), 1987; and Innis et al. (eds.), PCR Protocols: A Guide to Methods and Applications, Academic Press: San Diego, 1990. PCR primer pairs can be derived from a known sequence, for example, by using computer programs intended for that purpose such as Primer (Version 0.5, © 1991, Whitehead Institute for Biomedical Research, Cambridge, Mass.). One of skill in the art will appreciate that the specificity of a particular probe or primer increases with the length, but that a probe or primer can range in size from a full-length sequence to sequences as short as five consecutive nucleotides. Thus, for example, a primer of 20 consecutive nucleotides can anneal to a target with a higher specificity than a corresponding primer of only 15 nucleotides. Thus, in order to obtain greater specificity, probes and primers can be selected that comprise, for example, 10, 20, 25, 30, 35, 40, 50, 60, 70, 80, 90, 100, 150, 200, 250, 300, 350, 400, 450, 500, 550, 600, 650, 700, 750, 800, 850, 900, 950, 1000, 1050, 1100, 1150, 1200, 1250, 1300, 1350, 1400, 1450, 1500, 1550, 1600, 1650, 1700, 1750, 1800, 1850, 1900, 2000, 2050, 2100, 2150, 2200, 2250, 2300, 2350, 2400, 2450, 2500, 2550, 2600, 2650, 2700, 2750, 2800, 2850, 2900, 3000, 3050, 3100, 3150, 3200, 3250, 3300, 3350, 3400, 3450, 3500, 3550, 3600, 3650, 3700, 3750, 3800, 3850, 3900, 4000, 4050, 4100, 4150, 4200, 4250, 4300, 4350, 4400, 4450, 4500, 4550, 4600, 4650, 4700, 4750, 4800, 4850, 4900, 5000, 5050, 5100, 5150, 5200, 5250, 5300, 5350, 5400, 5450, or more consecutive nucleotides.

[0091] Promoter: An array of nucleic acid control sequences which direct transcription of a nucleic acid. A promoter includes necessary nucleic acid sequences near the start site of transcription, such as, in the case of a polymerase II type promoter, a TATA element. A promoter can include distal enhancer or repressor elements which can be located as much as several thousand base pairs from the start site of transcription.

[0092] Purified: The term “purified” as used herein does not require absolute purity; rather, it is intended as a relative term. Thus, for example, a purified polypeptide or nucleic acid preparation can be one in which the subject polypeptide or nucleic acid, respectively, is at a higher concentration than the polypeptide or nucleic acid would be in its natural environment within an organism. For example, a polypeptide preparation can be considered purified if the polypeptide content in the preparation represents at least 50%, 60%, 70%, 80%, 85%, 90%, 92%, 95%, 98%, or 99% of the total protein content of the preparation.

[0093] Recombinant: A “recombinant” nucleic acid is one having (1) a sequence that is not naturally occurring in the organism in which it is expressed or (2) a sequence made by an artificial combination of two otherwise-separated, shorter sequences. This artificial combination is often accomplished by chemical synthesis or, more commonly, by the artificial manipulation of isolated segments of nucleic acids, e.g., by genetic engineering techniques. “Recombinant” is also used to describe nucleic acid molecules that have been artificially manipulated, but contain the same regulatory sequences and coding regions that are found in the organism from which the nucleic acid was isolated.

[0094] Sequence identity: The similarity between amino acid sequences is expressed in terms of the similarity between the sequences, otherwise referred to as sequence identity. Sequence identity is frequently measured in terms of percentage identity (or similarity or homology); the higher the percentage, the more similar the two sequences are. Homologs or variants of a peptide, such as SEQ ID NO: 12, possess a relatively high degree of sequence identity when aligned using standard methods.

[0095] Methods of alignment of sequences for comparison are well known in the art. Various programs and alignment algorithms are described in: Smith and Waterman, Adv. Appl. Math. 2:482, 1981; Needleman and Wunsch, J. Mol. Biol. 48:443-53, 1970; Pearson and Lipman, Proc. Natl. Acad. Sci. U.S.A. 85:2444-8, 1988; Higgins and Sharp, Gene 73:237-44, 1988; Higgins and Sharp, CABIOS 5:151-3, 1989; Corpet et al., Nucleic Acids Research 16:10881-90, 1988; and Altschul et al., Nature Genet. 6:119-29, 1994.

[0096] The NCBI Basic Local Alignment Search Tool (BLAST™) (Altschul et al., J. Mol. Biol. 215:403-10, 1990) is available from several sources, including the National Center for Biotechnology Information (NCBI, Bethesda, Md.) and on the Internet, for use in connection with the sequence analysis programs blastp, blastn, blastx, tblastn and tblastx.

[0097] Variants of a peptide are typically characterized by possession of at least 50% sequence identity counted over the full length alignment with the amino acid sequence using the NCBI Blast 2.0, gapped blastp set to default parameters. For comparisons of amino acid sequences of greater than about 30 amino acids, the Blast 2 sequences function is employed using the default BLOSUM62 matrix set to default parameters, (gap existence cost of 11, and a per residue gap cost of 1). When aligning short peptides (fewer than around 30 amino acids), the alignment is performed using the Blast 2 sequences function, employing the PAM30 matrix set to default parameters (open gap 9, extension gap 1 penalties). Proteins with even greater similarity to the reference sequences will show increasing percentage identities when assessed by this method, such as at least 80%, at least 90%, at least 95%, at least 98%, or even at least 99% sequence identity. When less than the entire sequence is being compared for sequence identity, homologs and variants will typically possess at least 80% sequence identity over short windows of 10-20 amino acids, and may possess sequence identities of at least 85%, at least 90%, at least 95%, or 98% depending on their similarity to the reference sequence. Methods for determining sequence identity over such short windows are described at the website that is maintained by the National Center for Biotechnology Information in Bethesda, Md. One of skill in the art will appreciate that these sequence identity ranges are provided for guidance only; it is entirely possible that strongly significant homologs could be obtained that fall outside of the ranges provided.

[0098] Similar methods can be used to determine the percent sequence identity of a nucleic acid sequence. In a particular example, a homologous sequence is aligned to a native sequence, and the number of matches is determined by counting the number of positions where an identical nucleotide or amino acid residue is presented in both sequences. The percent sequence identity is determined by dividing the number of matches either by the length of the sequence set forth in the identified sequence (e.g., SEQ ID NO: 11), or by an articulated length (e.g., 100 consecutive nucleotides or amino acid residues from a sequence set forth in an identified sequence), followed by multiplying the resulting value by 100. For example, a nucleic acid sequence that has 1166 matches when aligned with the sequence set forth in SEQ ID NO: 11 is 75.0 percent identical to the sequence set forth in SEQ ID NO: 11 (i.e., 1166÷1554*100=75.0). It is noted that the percent sequence identity value is rounded to the nearest tenth. For example, 75.11, 75.12, 75.13, and 75.14 is rounded down to 75.1, while 75.15, 75.16, 75.17, 75.18, and 75.19 is rounded up to 75.2. It is also noted that the length value will always be an integer. In another example, a target sequence containing a 20-nucleotide region that aligns with 20 consecutive nucleotides from an identified sequence as follows contains a region that shares 75 percent sequence identity to that identified sequence (i.e., 15 20*100=75).

11 20Target Sequence:AGGTCGTGTACTGTCAGTCA| || ||| |||| |||| |Identified Sequence:ACGTGGTGAACTGCCAGTGA

[0099] Specific binding agent: An agent that is capable of specifically binding to any of the polypeptide described herein. Examples include, but are not limited to, polyclonal antibodies, monoclonal antibodies (including humanized monoclonal antibodies), and fragments of monoclonal antibodies such as Fab, F(ab′)2, and Fv fragments as well as any other agent capable of specifically binding to an epitope of such polypeptides.

[0100] Antibodies to the polypeptides provided herein (or fragments, variants, or fusions thereof) can be used to purify or identify such polypeptides. The amino acid and nucleic acid sequences provided herein allow for the production of specific antibody-based binding agents that recognize the polypeptides described herein.

[0101] Monoclonal or polyclonal antibodies can be produced to the polypeptides, portions of the polypeptides, or variants thereof. Optimally, antibodies raised against one or more epitopes on a polypeptide antigen will specifically detect that polypeptide. That is, antibodies raised against one particular polypeptide would recognize and bind that particular polypeptide, and would not substantially recognize or bind to other polypeptides. The determination that an antibody specifically binds to a particular polypeptide is made by any one of a number of standard immunoassay methods; for instance, Western blotting (See, e.g., Sambrook et al. (ed.), Molecular Cloning: A Laboratory Manual, 2nd ed., vol. 1-3, Cold Spring Harbor Laboratory Press, Cold Spring Harbor, N.Y., 1989).

[0102] To determine that a given antibody preparation (such as a preparation produced in a mouse against a polypeptide having the amino acid sequence set forth in SEQ ID NO: 12) specifically detects the appropriate polypeptide (e.g., a polypeptide having the amino acid sequence set forth in SEQ ID NO: 12) by Western blotting, total cellular protein can be extracted from cells and separated by SDS-polyacrylamide gel electrophoresis.

[0103] The separated total cellular protein can then be transferred to a membrane (e.g., nitrocellulose), and the antibody preparation incubated with the membrane. After washing the membrane to remove non-specifically bound antibodies, the presence of specifically bound antibodies can be detected using an appropriate secondary antibody (e.g., an anti-mouse antibody) conjugated to a polypeptide such as alkaline phosphatase since application of 5-bromo-4-chloro-3-indolyl phosphate/nitro blue tetrazolium results in the production of a densely blue-colored compound by immuno-localized alkaline phosphatase.

[0104] Substantially pure polypeptides suitable for use as an immunogen can be obtained from transfected cells, transformed cells, or wild-type cells. Polypeptide concentrations in the final preparation can be adjusted, for example, by concentration on an Amicon filter device, to the level of a few micrograms per milliliter. In addition, polypeptides ranging in size from full-length polypeptides to polypeptides having as few as nine amino acid residues can be utilized as immunogens. Such polypeptides can be produced in cell culture, can be chemically synthesized using standard methods, or can be obtained by cleaving large polypeptides into smaller polypeptides that can be purified. Polypeptides having as few as nine amino acid residues in length can be immunogenic when presented to an immune system in the context of a Major Histocompatibility Complex (MHC) molecule such as an MHC class I or MHC class II molecule. Accordingly, polypeptides having at least 9, 10, 11, 12, 13, 14, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 70, 80, 90, 100, 150, 200, 250,300, 350, 400, 450, 500, 550, 600, 650, 700, 750, 800, 900, 1000, 1050, 1100, 1150, 1200, 1250, 1300, 1350, or more consecutive amino acid residues of any amino acid sequence disclosed herein can be used as immunogens for producing antibodies.

[0105] Monoclonal antibodies to any of the polypeptides disclosed herein can be prepared from murine hybridomas according to the classic method of Kohler & Milstein (Nature 256:495-7, 1975) or a derivative method thereof.

[0106] Polyclonal antiserum containing antibodies to the heterogeneous epitopes of any polypeptide disclosed herein can be prepared by immunizing suitable animals with the polypeptide (or fragment thereof), which can be unmodified or modified to enhance immunogenicity. An effective immunization protocol for rabbits can be found in Vaitukaitis et al. (J. Clin. Endocrinol. Metab. 33:988-91,1971).

[0107] Antibody fragments can be used in place of whole antibodies and can be readily expressed in prokaryotic host cells. Methods of making and using immunologically effective portions of monoclonal antibodies, also referred to as “antibody fragments,” are well known and include those described in Better & Horowitz (Methods Enzymol. 178:476-96,1989), Glockshuber et al. (Biochemistry 29:1362-7,1990), U.S. Pat. No. 5,648,237 (“Expression of Functional Antibody Fragments”), U.S. Pat. No. 4,946,778 (“Single Polypeptide Chain Binding Molecules”), U.S. Pat. No. 5,455,030 (“Immunotherapy Using Single Chain Polypeptide Binding Molecules”), and references cited therein.

[0108] Transformed: A “transformed” cell is a cell into which a nucleic acid molecule has been introduced by, for example, molecular biology techniques. Transformation encompasses all techniques by which a nucleic acid molecule can be introduced into such a cell including, without limitation, transfection with a viral vector, conjugation, transformation with a plasmid vector, and introduction of naked DNA by electroporation, lipofection, and particle gun acceleration.

[0109] Variants, fragments or fusion proteins: The disclosed proteins, include variants, fragments, and fusions thereof. DNA sequences (for example SEQ ID NO: 11) which encode for a protein (for example SEQ ID NO: 12), fusion protein, or a fragment or variant of a protein, can be engineered to allow the protein to be expressed in eukaryotic cells, bacteria, insects, and/or plants. To obtain expression, the DNA sequence can be altered and operably linked to other regulatory sequences. The final product, which contains the regulatory sequences and the protein, is referred to as a vector. This vector can be introduced into eukaryotic, bacteria, insect, and/or plant cells. Once inside the cell the vector allows the protein to be produced.

[0110] A fusion protein including a protein, such as a tryptophan aminotransferase (or variant, polymorphism, mutant, or fragment thereof), for example SEQ ID NO: 12, linked to other amino acid sequences that do not inhibit the desired activity of the protein, for example the ability to convert tryptophan to indole-3-pyruvate. In one example, the other amino acid sequences are no more than about 10, 12, 15, 20, 25, 30, or 50 amino acids in length.

[0111] One of ordinary skill in the art will appreciate that a DNA sequence can be altered in numerous ways without affecting the biological activity of the encoded protein. For example, PCR can be used to produce variations in the DNA sequence which encodes an protein. Such variants can be variants optimized for codon preference in a host cell used to express the protein, or other sequence changes that facilitate expression.

[0112] Vector: A nucleic acid molecule as introduced into a cell, thereby producing a transformed cell. A vector may include nucleic acid sequences that permit it to replicate in the cell, such as an origin of replication. A vector may also include one or more selectable marker genes and other genetic elements known in the art.

[0113] Overview of Biosynthetic Pathways

[0114] As shown in FIGS. 1-3 and 11-13, many biosynthetic pathways can be used to produce monatin or its intermediates such as indole-3-pyruvate or MP. For the conversion of each substrate (glucose, tryptophan, indole-3-lactic acid, indole-3-pyruvate, and MP) to each product (tryptophan, indole-3-pyruvate, MP and monatin) several different polypeptides can be used. Moreover, these reactions can be carried out in vivo, in vitro, or through a combination of in vivo reactions and in vitro reactions, such as in vitro reactions that include non-enzymatic chemical reactions. Therefore, FIGS. 1-3 and 11-13 are exemplary, and show multiple different pathways that can be used to obtain desired products.

[0115] Glucose to Tryptophan

[0116] Many organisms can synthesize tryptophan from glucose. The construct(s) containing the gene(s) necessary to produce monatin, MP, and/or indole-3-pyruvate from glucose and/or tryptophan can be cloned into such organisms. It is shown herein that tryptophan can be converted into monatin.

[0117] In other examples, an organism is engineered using known polypeptides to produce tryptophan, or overproduce tryptophan. For example, U.S. Pat. No. 4,371,614 (herein incorporated by reference) describes an E. coli strain transformed with a plasmid containing a wild type tryptophan operon.

[0118] Maximum titers of tryptophan disclosed in U.S. Pat. No. 4,371,614 are about 230 ppm. Similarly, WO 8701130 (herein incorporated by reference) describes an E. coli strain that has been genetically engineered to produce tryptophan and discusses increasing fermentative production of L-tryptophan. Those skilled in the art will recognize that organisms capable of producing tryptophan from glucose are also capable of utilizing other carbon and energy sources that can be converted to glucose or fructose-6-phosphate, with similar results. Exemplary carbon and energy sources include, but are not limited to, sucrose, fructose, starch, cellulose, or glycerol.

[0119] Tryptophan to Indole-3-pyruvate

[0120] Several polypeptides can be used to convert tryptophan to indole-3-pyruvate. Exemplary polypeptides include members of the enzyme classes (EC) 2.6.1.27, 1.4.1.19, 1.4.99.1, 2.6.1.28, 1.4.3.2, 1.4.3.3, 2.6.1.5, 2.6.1.-, 2.6.1.1, and 2.6.1.21. These classes include polypeptides termed tryptophan aminotransferase (also termed L-phenylalanine-2-oxoglutarate aminotransferase, tryptophan transaminase, 5-hydroxytryptophan-ketoglutaric transaminase, hydroxytryptophan aminotransferase, L-tryptophan aminotransferase, L-tryptophan transaminase, and L-tryptophan:2-oxoglutarate aminotransferase) which converts L-tryptophan and 2-oxoglutarate to indole-3-pyruvate and L-glutamate; D-tryptophan aminotransferase which converts D-tryptophan and a 2-oxo acid to indole-3-pyruvate and an amino acid; tryptophan dehydrogenase (also termed NAD(P)-L-tryptophan dehydrogenase, L-tryptophan dehydrogenase, L-Trp-dehydrogenase, TDH and L-tryptophan:NAD(P) oxidoreductase (deaminating)) which converts L-tryptophan and NAD(P) to indole-3-pyruvate and NH3 and NAD(P)H; D-amino acid dehydrogenase, which converts D-amino acids and FAD to indole-3-pyruvate and NH3 and FADH2; tryptophan-phenylpyruvate transaminase (also termed L-tryptophan-α-ketoisocaproate aminotransferase and L-tryptophan:phenylpyruvate aminotransferase) which converts L-tryptophan and phenylpyruvate to indole-3-pyruvate and L-phenylalanine; L-amino acid oxidase (also termed ophio-amino-acid oxidase and L-amino-acid:oxygen oxidoreductase (deaminating)) which converts an L-amino acid and H2O and O2 to a 2-oxo acid and NH3 and H2O2; D-amino acid oxidase (also termed ophio-amino-acid oxidase and D-amino-acid:oxygen oxidoreductase (deaminating)) which converts a D-amino acid and H2O and O2 to a 2-oxo acid and NH3 and H2O2; and tryptophan oxidase which converts L-tryptophan and H2O and O2 to indole-3-pyruvate and NH3 and H2O2. These classes also contain tyrosine (aromatic) aminotransferase, aspartate aminotransferase, D-amino acid (or D-alanine) aminotransferase, and broad (multiple substrate) aminotransferase which have multiple aminotransferase activities, some of which can convert tryptophan and a 2-oxo acid to indole-3-pyruvate and an amino acid.

[0121] Eleven members of the aminotransferase class that have such activity are described below in Example 1, including a novel aminotransferase shown in SEQ ID NOS: 11 and 12. Therefore, this disclosure provides isolated nucleic acid and protein sequences having at least 80%, at least 85%, at least 90%, at least 95%, at least 98%, or even at least 99% sequence identity to SEQ ID NOS: 11 and 12. Also encompassed by this disclosure are fragments and fusions of SEQ ID NOS: 11 and 12 that retain aminotransferase activity or encode a protein having aminotransferase activity. Exemplary fragments include, but are not limited to at least 10, 12, 15, 20, 25, 50, 100, 200, 500, or 1000 contiguous nucleotides of SEQ ID NO: 11 or at least 6, 10, 15, 20, 25, 50, 75, 100, 200, 300 or 350 contiguous amino acids of SEQ ID NO: 12. The disclosed sequences (and variants, fragments, and fusions thereof) can be part of a vector. The vector can be used to transform host cells, thereby producing recombinant cells which can produce indole-3-pyruvate from tryptophan, and in some examples can further produce MP and/or monatin.

[0122] L-amino acid oxidases (1.4.3.2) are known, and sequences can be isolated from several different sources, such as Vipera lebetine (sp P81375), Ophiophagus hannah (sp P81383), Agkistrodon rhodostoma (spP81382), Crotalus atrox (sp P56742), Burkholderia cepacia, Arabidopsis thaliana, Caulobacter cresentus, Chlamydomonas reinhardtii, Mus musculus, Pseudomonas syringae, and Rhodococcus str. In addition, tryptophan oxidases are described in the literature and can be isolated, for example, from Coprinus sp. SF-1, Chinese cabbage with club root disease, Arabidopsis thaliana, and mammalian liver. One member of the L-amino acid oxidase class that can convert tryptophan to indole-3-pyruvate is discussed below in Example 3, as well as alternative sources for molecular cloning. Many D-amino acid oxidase genes are available in databases for molecular cloning.

[0123] Tryptophan dehydrogenases are known, and can be isolated, for example, from spinach, Pisum sativum, Prosopis juliflora, pea, mesquite, wheat, maize, tomato, tobacco, Chromobacterium violaceum, and Lactobacilli. Many D-amino acid dehydrogenase gene sequences are known.

[0124] As shown in FIGS. 11-13, if an amino acid oxidase, such as tryptophan oxidase, is used to convert tryptophan to indole-3-pyruvate, catalase can be added to reduce or even eliminate the presence of hydrogen peroxide.

[0125] Indole-3-lactate to Indole-3-pyruvate

[0126] The reaction that converts indole-3-lactate to indole-3-pyruvate can be catalyzed by a variety of polypeptides, such as members of the 1.1.1.110, 1.1.1.27, 1.1.1.28, 1.1.2.3, 1.1.1.222, 1.1.1.237, 1.1.3.-, or 1.1.1.111 classes of polypeptides. The 1.1.1.110 class of polypeptides includes indolelactate dehydrogenases (also termed indolelactic acid: NAD+ oxidoreductase). The 1.1.1.27, 1.1.1.28, and 1.1.2.3 classes include lactate dehydrogenases (also termed lactic acid dehydrogenases, lactate: NAD+ oxidoreductase). The 1.1.1.222 class contains (R)-4-hydroxyphenyllactate dehydrogenase (also termed D-aromatic lactate dehydrogenase, R-aromatic lactate dehydrogenase, and R-3-(4-hydroxyphenyl)lactate:NAD(P)+2-oxidoreductase) and the 1.1.1.237 class contains 3-(4-hydroxyphenylpyruvate) reductase (also termed hydroxyphenylpyruvate reductase and 4-hydroxyphenyllactate: NAD+ oxidoreductase). The 1.1.3.- class contains lactate oxidases, and the 1.1.1.111 class contains (3-imidazol-5-yl) lactate dehydrogenases (also termed (S)-3-(imidazol-5-yl)lactate:NAD(P)+ oxidoreductase). It is likely that several of the polypeptides in these classes allow for the production of indole-3-pyruvate from indole-3-lactic acid. Examples of this conversion are provided in Example 2.

[0127] Chemical reactions can also be used to convert indole-3-lactic acid to indole-3-pyruvate. Such chemical reactions include an oxidation step that can be accomplished using several methods, for example: air oxidation using a B2 catalyst (China Chemical Reporter, v 13, n 28, p 18 (1), 2002), dilute permanganate and perchlorate, or hydrogen peroxide in the presence of metal catalysts.

[0128] Indole-3-pyruvate to 2-hydroxy 2-(indol-3ylmethyl)-4-keto glutaric acid (MP)

[0129] Several known polypeptides can be used to convert indole-3-pyruvate to MP. Exemplary polypeptide classes include 4.1.3.-, 4.1.3.16, 4.1.3.17, and 4.1.2.-. These classes include carbon-carbon synthases/lyases, such as aldolases that catalyze the condensation of two carboxylic acid substrates. Peptide class EC 4.1.3.-are synthases/lyases that form carbon-carbon bonds utilizing oxo-acid substrates (such as indole-3-pyruvate) as the electrophile, while EC 4.1.2.-are synthases/lyases that form carbon-carbon bonds utilizing aldehyde substrates (such as benzaldehyde) as the electrophile.

[0130] For example, the polypeptide described in EP 1045-029 (EC 4.1.3.16, 4-hydroxy-2-oxoglutarate glyoxylate-lyase also termed 4-hydroxy-2-oxoglutarate aldolase, 2-oxo-4-hydroxyglutarate aldolase or KHG aldolase) converts glyoxylic acid and pyruvate to 4-hydroxy-2-ketoglutaric acid, and the polypeptide 4-hydroxy-4-methyl-2-oxoglutarate aldolase (EC 4.1.3.17, also termed 4-hydroxy-4-methyl-2-oxoglutarate pyruvate-lyase or ProA aldolase), condenses two keto-acids such as two pyruvates to 4-hydroxy-4-methyl-2-oxoglutarate. Reactions utilizing these lyases are described herein.

[0131] FIGS. 1-2 and 11-13 show schematic diagrams of these reactions in which a 3-carbon (C3) molecule is combined with indole-3-pyruvate. Many members of EC 4.1.2.- and 4.1.3.-, particularly PLP-utilizing polypeptides, can utilize C3 molecules that are amino acids such as serine, cysteine, and alanine, or derivatives thereof. Aldol condensations catalyzed by representatives of EC 4.1.2.- and 4.1.3.-require the three carbon molecule of this pathway to be pyruvate or a derivative of pyruvate. However, other compounds can serve as a C3 carbon source and be converted to pyruvate. Alanine can be transaminated by many PLP-utilizing transaminases, including many of those mentioned above, to yield pyruvate. Pyruvate and ammonia can be obtained by beta-elimination reactions (such as those catalyzed by tryptophanase or P-tyrosinase) of L-serine, L-cysteine, and derivatives of serine and cysteine with sufficient leaving groups, such as O-methyl-L-serine, O-benzyl-L-serine, S-methylcysteine, S-benzylcysteine, S-alkyl-L-cysteine, O-acyl-L-serine, and 3-chloro-L-alanine. Aspartate can serve as a source of pyruvate in PLP-mediated beta-lyase reactions such as those catalyzed by tryptophanase (EC 4.1.99.1) and/or β-tyrosinase (EC 4.1.99.2, also termed tyrosine-phenol lyase). The rate of beta-lyase reactions can be increased by performing site-directed mutagensis on the (4.1.99.1-2) polypeptides as described by Mouratou et al. (J. Biol. Chem 274:1320-5, 1999) and in Example 8. These modifications allow the polypeptides to accept dicarboxylic amino acid substrates. Lactate can also serve as a source of pyruvate, and is oxidized to pyruvate by the addition of lactate dehydrogenase and an oxidized cofactor or lactate oxidase and oxygen. Examples of these reactions are described below. For example, as shown in FIG. 2 and FIGS. 11-13, ProA aldolase can be contacted with indole-3-pyruvate when pyruvate is used as the C3 molecule.

[0132] The MP can also be generated using chemical reactions, such as the aldol condensations provided in Example 5.

[0133] MP to Monatin

[0134] Conversion of MP to monatin can be catalyzed by one or more of: tryptophan aminotransferases (2.6.1.27), tryptophan dehydrogenases (1.4.1.19), D-amino acid dehydrogenases (1.4.99.1), glutamate dehydrogenases (1.4.1.2-4), phenylalanine dehydrogenase (EC 1.4.1.20), tryptophan-phenylpyruvate transaminases (2.6.1.28), or more generally members of the aminotransferase family (2.6.1.-) such as aspartate aminotransferase (EC 2.6.1.1), tyrosine (aromatic) aminotransferase (2.6.1.5), D-tryptophan aminotransferase, or D-alanine (2.6.1.21) aminotransferase (FIG. 2). Eleven members of the aminotransferase class are described below (Example 1), including a novel member of the class shown in SEQ ID NOS: 11 and 12, and reactions demonstrating the activity of aminotransferase and dehydrogenase enzymes are provided in Example 7.

[0135] This reaction can also be performed using chemical reactions. Amination of the keto acid (MP) is performed by reductive amination using ammonia and sodium cyanoborohydride.

[0136] FIGS. 11-13 show additional polypeptides that can be used to convert MP to monatin, as well as providing increased yields of monatin from indole-3-pyruvate or tryptophan. For example, if aspartate is used as the amino donor, aspartate aminotransferase can be used to convert the aspartate to oxaloacetate (FIG. 11). The oxaloacetate is converted to pyruvate and carbon dioxide by a decarboxylase, such as oxaloacetate decarboxylase (FIG. 11). In addition, if lysine is used as the amino donor, lysine epsilon aminotransferase can be used to convert the lysine to allysine (FIG. 12). The allysine is spontaneously converted to 1-piperideine 6-carboxylate (FIG. 12). If a polypeptide capable of catalyzing reductive amination reactions (e.g., glutamate dehydrogenase) is used to convert MP to monatin, a polypeptide that can recycle NAD(P)H and/or produce a volatile product (FIG. 13) can be used, such as formate dehydrogenase.

[0137] Additional Considerations in the Design of the Biosynthetic Pathways

[0138] Depending on which polypeptides are used to generate indole-3-pyruvate, MP and/or monatin, cofactors, substrates, and/or additional polypeptides can be provided to the production cell to enhance product formation.

[0139] Removal of Hydrogen Peroxide

[0140] Hydrogen peroxide (H2O2) is a product that, if generated, can be toxic to production cells and can damage the polypeptides or intermediates produced. The L-amino acid oxidase described above generates H2O2 as a product. Therefore, if L-amino acid oxidase is used, the resulting H2O2 can be removed or its levels decreased to decrease potential injury to the cell or product.

[0141] Catalases can be used to reduce the level of H2O2 in the cell (FIGS. 11-13). The production cell can express a gene or cDNA sequence that encodes a catalase (EC 1.1 1. 1.6), which catalyzes the decomposition of hydrogen peroxide into water and oxygen gas. For example, a catalase can be expressed from a vector transfected into the production cell. Examples of catalases that can be used to include, but are not limited to: tr|Q9EV50 (Staphylococcus xylosus), tr|Q9KBE8 (Bacillus halodurans), tr|Q9URJ7 (Candida albicans), tr|P77948 (Streptomyces coelicolor), tr|Q9RBJ5 (Xanthomonas campestris) (SwissProt Accession Nos.). Biocatalytic reactors utilizing L-amino acid oxidase, D-amino acid oxidase, or tryptophan oxidase can also contain a catalase polypeptide.

[0142] Modulation of PLP (pyridoxal-5′-phosphate) Availability

[0143] As shown in FIG. 1, PLP can be utilized in one or more of the biosynthetic steps described herein. The concentration of PLP can be supplemented so that PLP does not become a limitation on the overall efficiency of the reaction.

[0144] The biosynthetic pathway for vitamin B6 (the precursor of PLP) has been thoroughly studied in E. coli and some of the proteins have been crystallized (Laber et al., FEBS Letters, 449:45-8, 1999). Two of the genes (epd or gapB and serC) are required in other metabolic pathways, while three genes (pdxA, pdxB, and pdxj) are unique to pyridoxal phosphate biosynthesis. One of the starting materials in the E. coli pathway is 1-deoxy-D-xylulose-5-phosphate (DXP). Synthesis of this precursor from common 2 and 3 carbon central metabolites is catalyzed by the polypeptide 1-deoxy-D-xylulose-5-phosphate synthase (DSX). The other precursor is a threonine derivative formed from the 4-carbon sugar, D-erythrose 4-phosphate. The genes required for the conversion to phospho-4-hydroxyl-L threonine (HTP) are epd, pdxB, and serC. The last reaction for the formation of PLP is a complex intramolecular condensation and ring-closure reaction between DXP and HTP, catalyzed by the gene products of pdxA and pdxJ.

[0145] If PLP becomes a limiting nutrient during the fermentation to produce monatin, increased expression of one or more of the pathway genes in a production host cell can be used to increase the yield of monatin. A host organism can contain multiple copies of its native pathway genes or copies of non-native pathway genes can be incorporated into the organism's genome. Additionally, multiple copies of the salvage pathway genes can be cloned into the host organism.

[0146] One salvage pathway that is conserved in all organisms recycles the various derivatives of vitamin B6 to the active PLP form. The polypeptides involved in this pathway are pdxK kinase, pdxH oxidase, and pdxY kinase. Over-expression of one or more of these genes can increase PLP availability.

[0147] Vitamin B6 levels can be elevated by elimination or repression of the metabolic regulation of the native biosynthetic pathway genes in the host organism. PLP represses polypeptides involved in the biosynthesis of the precursor threonine derivative in the bacterium Flavobacterium sp. strain 238-7. This bacterial strain, freed of metabolic control, overproduces pyridoxal derivatives and can excrete up to 20 mg/L of PLP. Genetic manipulation of the host organism producing monatin in a similar fashion will allow the increased production PLP without over-expression of the biosynthetic pathway genes.

[0148] Ammonium Utilization

[0149] Tryptophanase reactions can be driven toward the synthetic direction (production of tryptophan from indole) by making ammonia more available or by removal of water. Reductive amination reactions, such as those catalyzed by glutamate dehydrogenase, can also be driven forward by an excess of ammonium.

[0150] Ammonia can be made available as an ammonium carbonate or ammonium phosphate salt in a carbonate or phosphate buffered system. Ammonia can also be provided as ammonium pyruvate or ammonium formate. Alternatively, ammonia can be supplied if the reaction is coupled with a reaction that generates ammonia, such as glutamate dehydrogenase or tryptophan dehydrogenase. Ammonia can be generated by addition of the natural substrates of EC 4.1.99.- (tyrosine or tryptophan), which will be hydrolyzed to phenol or indole, pyruvate and NH3. This also allows for an increased yield of synthetic product over the normal equilibrium amount by allowing the enzyme to hydrolyze its preferred substrate.

[0151] Removal of Products and By Products

[0152] The conversion of tryptophan to indole-3-pyruvate via a tryptophan aminotransferase may adversely affect the production rate of indole-3-pyruvate because the reaction produces glutamate and requires the co-substrate 2-oxoglutarate (α-ketoglutarate). Glutamate may cause inhibition of the aminotransferase, and the reaction will consume large amounts of the co-substrate. Moreover, high glutamate concentrations are detrimental to downstream separation processes.

[0153] The polypeptide glutamate dehydrogenase (GLDH) converts glutamate to 2-oxoglutarate, thereby recycling the co-substrate in the reaction catalyzed by tryptophan aminotransferase. GLDH also generates reducing equivalents (NADH or NADPH) that can be used to generate energy for the cell (ATP) under aerobic conditions. The utilization of glutamate by GLDH also reduces by product formation. Additionally, the reaction generates ammonia, which can serve as a nitrogen source for the cell or as a substrate in a reductive amination for the final step shown in FIG. 1. Therefore, a production cell that over-expresses a GLDH polypeptide can be used to increase the yield and reduce the cost of media and/or separation processes.

[0154] In the tryptophan to monatin pathway, the amino donor of step three (e.g., glutamate or aspartate) can be converted back to the amino acceptor required for step 1 (e.g., 2-oxo-glutarate or oxaloacetate), if an aminotransferase from the appropriate enzyme classes is used. Utilization of two separate transaminases for this pathway, in which the substrate of one transaminase does not competitively inhibit the activity of the other transaminase, can increase the efficiency of this pathway.

[0155] Many of the reactions in the described pathways are reversible and will, therefore, reach an equilibrium between substrates and products. The yield of the pathway can be increased by continuous removal of the products from the polypeptides. For example, secretion of monatin into the fermentation broth using a permease or other transport protein, or selective crystallization of monatin from a biocatalytic reactor stream with concomitant recycle of substrates will increase the reaction yield.

[0156] The removal of byproducts by additional enzymatic reactions or by substitution of amino donor groups is another way to increase the reaction yield. Several examples are discussed in Example 13 and shown in FIGS. 11-13. Ideally a by product is produced that is unavailable to react in the reverse direction, either by phase change (evaporation) or by spontaneous conversion to an unreactive end product, such as carbon dioxide.

[0157] Modulation of the Substrate Pools

[0158] The indole pool can be modulated by increasing production of tryptophan precursors and/or altering catabolic pathways involving indole-3-pyruvate and/or tryptophan. For example, the production of indole-3-acetic acid from indole-3-pyruvate can be reduced or eliminated by functionally deleting the gene coding for EC 4.1.1.74 in the host cell. Production of indole from tryptophan can be reduced or eliminated by functionally deleting the gene coding for EC 4.1.99.1 in the host cell. Alternatively, an excess of indole can be utilized as a substrate in an in vitro or in vivo process in combination with increased amounts of the gene coding for EC 4.1.99.1 (Kawasaki et al., J. Ferm. and Bioeng., 82:604-6, 1996). Genetic modifications can be made to increase the level of intermediates such as D-erythrose-4-phosphate and chorismate.

[0159] Tryptophan production is regulated in most organisms. One mechanism is via feedback inhibition of certain enzymes in the pathway; as tryptophan levels increase, the production rate of tryptophan decreases. Thus, when using a host cell engineered to produce monatin via a tryptophan intermediate, an organism can be used that is not sensitive to tryptophan concentrations. For example, a strain of Catharanthus roseus that is resistant to growth inhibition by various tryptophan analogs was selected by repeated exposure to high concentrations of 5-methyltryptophan (Schallenberg and Berlin, Z Naturforsch 34:541-5, 1979). The resulting tryptophan synthase activity of the strain was less effected by product inhibition, likely due to mutations in the gene. Similarly, a host cell used for monatin production can be optimized.

[0160] Tryptophan production can be optimized through the use of directed evolution to evolve polypeptides that are less sensitive to product inhibition. For example, screening can be performed on plates containing no tryptophan in the medium, but with high levels of non-metabolizable tryptophan analogs. U.S. Pat. Nos. 5,756,345; 4,742,007; and 4,371,614 describe methods used to increase tryptophan productivity in a fermentation organism. The last step of tryptophan biosynthesis is the addition of serine to indole; therefore the availability of serine can be increased to increase tryptophan production.

[0161] The amount of monatin produced by a fermentation organism can be increased by increasing the amount of pyruvate produced by the host organism. Certain yeasts, such as Trichosporon cutaneum (Wang et al., Lett. Appl. Microbiol. 35:338-42, 2002) and Torulopsis glabrata (Li et al., Appl Microbiol. Biotechnol. 57:451-9, 2001) overproduce pyruvate and can be used to practice the methods disclosed herein. In addition, genetic modifications can be made to organisms to promote pyruvic acid production, such as those in E. coli strain W1485lip2 (Kawasaki et al., J. Ferm. and Bioeng. 82:604-6, 1996).

[0162] Controlling Chirality

[0163] The taste profile of monatin can be altered by controlling the stereochemistry (chirality) of the molecule. For example, different monatin isomers may be desired in different blends of concentrations for different food systems. Chirality can be controlled via a combination of pH and polypeptides.

[0164] Racemization at the C-4 position of monatin (see numbered molecule above) can occur by deprotonation and reprotonation of the alpha carbon, which can occur by a shift in pH or by reaction with the cofactor PLP. In a microorganism, the pH is unlikely to shift enough to cause the racemization, but PLP is abundant. Methods to control the chirality with polypeptides depend upon the biosynthetic route utilized for monatin production.

[0165] When monatin is formed using the pathway shown in FIG. 2, the following can be considered. In a biocatalytic reaction, the chirality of carbon-2 is determined by the enzyme that converts indole-3-pyruvate to MP. Multiple enzymes (e.g. from EC 4.1.2.-, 4.1.3.-) can convert indole-3-pyruvate to MP, thus, one can choose the enzyme that forms the desired isomer. Alternatively, the enantiospecificity of the enzyme that converts indole-3-pyruvate to MP can be modified through the use of directed evolution or catalytic antibodies can be engineered to catalyze the desired reaction. Once MP is produced (either enzymatically or by chemical condensation), the amino group can be added stereospecifically using a transaminase, such as those described herein. Either the R or S configuration of carbon-4 can be generated depending on whether a D- or L-aromatic acid aminotransferase is used. Most aminotransferases are specific for the L-isomer, however D-tryptophan aminotransferases exist in certain plants (Kohiba and Mito, Proceedings of the 8th International Symposium on Vitamin B6 and Carbonyl Catalysis, Osaka, Japan 1990). Moreover, D-alanine aminotransferases (2.6.1.21), D-methionine-pyruvate aminotransferases (2.6.1.41) and both (R)-3-amino-2-methylpropanoate aminotransferase (2.6.1.61) and (S)-3-amino-2-methylpropanoate aminotransferase (2.6.1.22) have been identified. Certain aminotransferases may only accept the substrate for this reaction with a particular configuration at the C2 carbon. Therefore, even if the conversion to MP is not stereospecific, the stereochemistry of the final product can be controlled through the appropriate selection of a transaminase. Since the reactions are reversible, the unreacted MP (undesired isomer) can be recycled back to its constituents and a racemic mixture of MP can be reformed.

[0166] Activation of Substrates

[0167] Phosphorylated substrates, such as phosphoenolpyruvate (PEP), can be used in the reactions disclosed herein. Phosphorylated substrates can be more energetically favorable and, therefore, can be used to increase the reaction rates and/or yields. In aldol condensations, the addition of a phosphate group stabilizes the enol tautomer of the nucleophilic substrate, making it more reactive. In other reactions, a phosphorylated substrate often provides a better leaving group. Similarly, substrates can be activated by conversion to CoA derivatives or pyrophosphate derivatives.

EXAMPLE 1

[0168] Cloning and Expression of Tryptophan Aminotransferases

[0169] This example describes methods that were used to clone tryptophan aminotransferases, which can be used to convert tryptophan to indole-3-pyruvate.

[0170] Experimental Overview

[0171] Eleven genes encoding aminotransferases were cloned into E. coli. These genes were Bacillus subtilis D-alanine aminotransferase (dat, Genbank Accession No. Y14082.1 bp 28622-29470 and Genbank Accession No. NP—388848.1, nucleic acid sequence and amino acid sequence, respectively), Sinorhizobium meliloti (also termed Rhizobium meliloti) tyrosine aminotransferase (tatA, SEQ ID NOS: 1 and 2, nucleic acid sequence and amino acid sequence, respectively), Rhodobacter sphaeroides strain 2.4.1 tyrosine aminotransferase (tatA asserted by homology, SEQ ID NOS: 3 and 4, nucleic acid sequence and amino acid sequence, respectively), R. sphaeroides 35053 tyrosine aminotransferase (asserted by homology, SEQ ID NOS: 5 and 6, nucleic acid sequence and amino acid sequence, respectively), Leishmania major broad substrate aminotransferase (bsat, asserted by homology to peptide fragments from L. mexicana, SEQ ID NOS: 7 and 8, nucleic acid sequence and amino acid sequence, respectively), Bacillus subtilis aromatic aminotransferase (araT, asserted by homology, SEQ ID NOS: 9 and 10, nucleic acid sequence and amino acid sequence, respectively), Lactobacillus amylovorus aromatic aminotransferase (araT asserted by homology, SEQ ID NOS: 11 and 12, nucleic acid sequence and amino acid sequence, respectively), R. sphaeroides 35053 multiple substrate aminotransferase (asserted by homology, SEQ ID NOS: 13 and 14, nucleic acid sequence and amino acid sequence, respectively), Rhodobacter sphaeroides strain 2.4.1 multiple substrate aminotransferase (msa asserted by homology, Genbank Accession No. AAAE01000093.1, bp 14743-16155 and Genbank Accession No. ZP00005082.1, nucleic acid sequence and amino acid sequence, respectively), Escherichia coli aspartate aminotransferase (aspC, Genbank Accession No. AE000195.1 bp 2755-1565 and Genbank Accession No. AAC74014.1, nucleic acid sequence and amino acid sequence, respectively), and E. coli tyrosine aminotransferase (tyrB, SEQ ID NOS: 31 and 32, nucleic acid sequence and amino acid sequence, respectively).

[0172] The genes were cloned, expressed, and tested for activity in conversion of tryptophan to indole-3-pyruvate, along with commercially available enzymes. All eleven clones had activity.

[0173] Identification of Bacterial Strains that may Contain Polypeptides with the Desired Activity

[0174] No genes in the NCBI (National Center for Biotechnology Information) database were designated as tryptophan aminotransferases. However, organisms having this enzymatic activity have been identified. L-tryptophan aminotransferase (TAT) activity has been measured in cell extracts or from purified protein from the following sources: Rhizobacterial isolate from Festuca octoflora, pea mitochondria and cytosol, sunflower crown gall cells, Rhizobium leguminosarum biovar trifoli, Erwinia herbicola pv gypsophilae, Pseudomonas syringae pv. savastanoi, Agrobacterium tumefaciens, Azospirillum lipferum & brasilense, Enterobacter cloacae, Enterobacter agglomerans, Bradyrhizobium elkanii, Candida maltosa, Azotobacter vinelandii, rat brain, rat liver, Sinorhizobium meliloti, Pseudomonas fluorescens CHA0, Lactococcus lactis, Lactobacillus casei, Lactobacillus helveticus, wheat seedlings, barley, Phaseolus aureus (mung bean), Saccharomyces uvarum (carlsbergensis), Leishmania sp., maize, tomato shoots, pea plants, tobacco, pig, Clostridium sporogenes, and Streptomyces griseus.

[0175] Isolation of Genomic DNA for Cloning

[0176]

S. meliloti
(ATCC number 9930) was grown in TY media at 25° C., pH 7.2. Cells were grown to an optical density at 600 nm (OD600) of 1.85 and a 2% inoculum was used for genomic DNA preparations. The Qiagen genomic tip 20/G kit (Valencia, Calif.) was used for genomic DNA isolation.

[0177]

Bacillus subtilis
6051 (ATCC) was grown at 30° C. in Bereto Nutrient Broth (Difco; Detroit, Mich.). The Qiagen genomic tip 20/G protocol was used to isolate the genomic DNA with the following changes: the concentrations of proteinase K and lysozyme were doubled and incubation times were increased 2-3 fold.

[0178]

Leishmania major
ATCC 50122 genomic DNA was supplied by IDI, Inc. (Quebec, Canada) in TE buffer pH 8.0, 17 ng/μL.

[0179]

Rhodobacter sphaeroides
2.4.1 (provided by Professor Sam Kaplan, University of Texas, Houston), R. sphaeroides 35053 (ATCC number), and L. amylovorus genomic DNA was prepared by standard phenol extraction. Cells were harvested in late log phase, resuspended in TEN buffer (10 mM Tris-HCl, pH 7.5, 1 mM EDTA, 100 mM NaCl), and lysed by the addition of 0.024 mL sodium lauryl sarcosine per mL cell suspension. After extracting at least three times with an equal volume of phenol saturated with TE buffer (10 mM Tris-HCl, pH 7.5, 1 mM EDTA), the DNA solution was extracted once with 9:1 chloroform:octanol and three times with chloroform. The DNA was precipitated by the addition of 0.1 volume of 3 M sodium acetate, pH 6.8 and 2 volumes ethanol. The precipitate was collected by centrifugation and washed once with 70% ethanol. Finally the DNA was dissolved in 0.10 mL distilled water.

[0180]

Escherichia coli
genomic DNA was isolated from strain DH10B (Invitrogen) and prepared using the Qiagen Genomic-tip™ (500/G) kit. From 30 mL of this strain grown in LB to an OD650 of 1.87, 0.3 mg of purified DNA was obtained. The purified DNA was dissolved in Qiagen elution buffer (EB) at a concentration of 0.37 μg/μL.

[0181] Polymerase Chain Reaction Protocol

[0182] Primers were designed with compatible overhangs for the pET 30 Xa/LIC vector (Novagen, Madison, Wis.). The pET vector has a 12 base single stranded overhang on the 5′ side of the Xa/LIC site and a 15-base single stranded overhang on the 3′ side of the Xa/LIC site. The plasmid is designed for ligation independent cloning, with N-terminal His and S-tags and an optional C-terminal His-tag. The Xa protease recognition site (IEGR) sits directly in front of the start codon of the gene of interest, such that the fusion protein tags can be removed.

[0183] The following sequences were added to the 5′ ends of the organism specific sequences when designing primers: forward primer, 5′ GGTATTGAGGGTCGC (SEQ ID NO: 73); reverse primer: 5′ AGAGGAGAGTTAGAGCC (SEQ ID NO: 74).

[0184]

Bacillus subtilis
dat primers:

2N term:5′-GGTATTGAGGGTCGCATGAAGGTTTTAGTCAATGG-3′ andC term:5′-AGAGGAGAGTTAGAGCCTTATGAAATGCTAGCAGCCT-3′.(SEQ ID NOS: 15 and 16)

[0185]

Sinorhizobium meliloti
tatA primers:

3N term:5′-GGTATTGAGGGTCGCATGTTCGACGCCCTCGCCCG andC term:5′-AGAGGAGAGTTAGAGCCTCAGAGACTGGTGAACTTGC.(SEQ ID NOS: 17 and 18)

[0186]

Bacillus subtilis
araT primers:

4N term:5′-GGTATTGAGGGTCGCATGGAACATTTGCTGAATCC andC term:5′-AGAGGAGAGTTAGAGCCTTAAACGCCGTTGTTTATCG.(SEQ ID NOS: 19 and 20)

[0187]

Rhodobacter sphaeroides
msa (both 2.4.1 .and 35053):

5N term:5′-GGTATTGAGGGTCGCATGCGCGAGCCTCTTGCCCT andC term:5′-AGAGGAGAGTTAGAGCCTCAGCCGGGGAAGCTCCGGG.(SEQ ID NOS: 21 and 22)

[0188]

Leishmania major
bsat:

6N term:5′-GGTATTGAGGGTCGCATGTCCACGCAGGCGGCCAT andC term:5′-AGAGGAGAGTTAGAGCCTCACTCACGATTCACATTGC.(SEQ ID NOS: 23 and 24)

[0189]

Lactobacillus amylovorus
araT:

7N term:5′-GGTATTGAGGGTCGCATGCCAGAATTAGCTAATGA andC term:5′-AGAGGAGAGTTAGAGCCTTATTCGTCCTCTTGTAAAA.(SEQ ID NOS: 25 and 26)

[0190]

Rhodobacter sphaeroides
tatA (both 2.4.1 and 35053 strains):

8N term:5′-GGTATTGAGGGTCGCATGCGCTCTACGACGGCTCC andC term:5′-AGAGGAGAGTTAGAGCCTCAGCCGCGCAGCACCTTGG.(SEQ ID NOS: 27 and 28)

[0191]

Escherichia coli
aspC:

9N term:5′-GGTATTGAGGGTCGCATGTTTGAGAACATTACCGC-3′ andC term:5′-AGAGGAGAGTTAGAGCCTTACAGCACTGCCACAATCG-3′.(SEQ ID NOS: 29 and 30)

[0192]

Escherichia coli
tyrB:

10N term:5′-GGTATTGAGGGTCGCGTGTTTCAAAAAGTTGACGC andC term:5′-AGAGGAGAGTTAGAGCCTTACATCACCGCAGCAAACG-3′.(SEQ ID NOS: 33 and 34)

[0193] The gene derived from S. meliloti (tatA) was amplified using the following PCR protocol. In a 50 μL reaction 0.1-0.5 μg template, 1.5 μM of each primer, 0.4 mM each dNTP, 3.5 U Expand High Fidelity Polymerase (Roche, Indianapolis, Ind.), and 1× Expand™ buffer with Mg were used. The thermocycler program used included a hot start at 96° C. for 5 minutes, followed by 29 repetitions of the following steps: 94° C. for 30 seconds, 55° C. for 2 minutes, and 72° C. for 2.5 minutes. After the 29 repetitions the sample was maintained at 72° C. for 10 minutes and then stored at 4° C. This PCR protocol produced a product of 1199 bp.

[0194] The sequences of the genes derived from R. sphaeroides (msa and tatA), L. amylovorus araT, and Bacillus araT were amplified using the following PCR protocol. In a 50 μL reaction, 0.1-0.5 μg template, 1.5 μM of each primer, 0.4 mM each dNTP, 3.5 U Expand High Fidelity™ Polymerase, and 1× Expand™ buffer with Mg were added. The thermocycler program used included a hot start at 96° C. for 5 minutes, followed by 29 repetitions of the following steps: 94° C. for 30 seconds, 40-60° C. for 1 minute, 45 seconds (gradient thermocycler) and 72° C. for 2 minutes, 15 seconds. After the 29 repetitions the sample was maintained at 72° C. for 10 minutes and then stored at 4° C.

[0195] For each R. sphaeroides msa gene, the 42° C. and 48° C. annealing temperatures produced multiple products, but a distinct band at approximately 1464 bp. For L. amylovorus araT, the 42° C., 48° C., and 56° C. annealing temperatures yielded single products with intense bands at 1173 bp. For B. subtilis araT, the 40° C., 45° C., 50° C., 55° C. annealing temperatures generated single intense products (1173 bp), from both genomic DNA and colonies. For L. major bsat, the 55° C. annealing temperature gave the cleanest product (1239 bp). For Rhodobacter tatA genes, the 50-55° C. annealing temperatures gave clean products at the correct size (1260 bp). For both E. coli genes and the B. subtilis dat gene, an annealing temperature of 55-60° C. was used, and the annealing time was shortened to 45 seconds. Clean products of the correct sizes were obtained (approximately 1.3 kb for the E. coli genes, 850 bp for the dat gene).

[0196] Cloning

[0197] The PCR products were gel purified from 0.8 or 1% TAE-agarose gels using the Qiagen gel extraction kit (Valencia, Calif.). The PCR products were quantified by comparison to standards on an agarose gel, and then treated with T4 DNA polymerase following the manufacturer's recommended protocols for Ligation Independent Cloning (Novagen, Madison, Wis.).

[0198] Briefly, approximately 0.2 pmol of purified PCR product was treated with 1 U T4 DNA polymerase in the presence of dGTP for 30 minutes at 22° C. The polymerase removes successive bases from the 3′ ends of the PCR product. When the polymerase encounters a guanine residue, the 5′ to 3′ polymerase activity of the enzyme counteracts the exonuclease activity to effectively prevent further excision. This creates single stranded overhangs that are compatible with the pET Xa/LIC vector. The polymerase is inactivated by incubating at 75° C. for 20 minutes.

[0199] The vector and treated insert were annealed as recommended by Novagen.

[0200] Approximately 0.02 pmol of treated insert and 0.01 pmol vector were incubated for 5 minutes at 22° C., 6.25 mM EDTA (final concentration) was added, and the incubation at 22° C. was repeated. The annealing reaction (1 μL) was added to NovaBlue™ singles competent cells (Novagen, Madison, Wis.), and incubated on ice for 5 minutes. After mixing, the cells were transformed by heat shock for 30 seconds at 42° C. The cells were placed on ice for 2 minutes, and allowed to recover in 250 μL of room temperature SOC for 30 minutes at 37° C. with shaking at 225 rpm. Cells were plated on LB plates containing kanamycin (25-50 μg/mL).

[0201] Plasmid DNA was purified using the Qiagen spin miniprep kit and screened for the correct inserts by restriction digest with XhoI and XbaI. The sequences of plasmids that appeared to have the correct insert were verified by dideoxy chain termination DNA sequencing.

[0202] SEQ ID NOS: 1-14 and 31-32 show nucleotide and corresponding amino acid sequences of the recombinant aminotransferases, any changes from the Genbank sequences were either silent or generated conservative substitutions in the protein sequence. SEQ ID NOS: 11 and 12 are novel sequences.

[0203] Gene Expression and Assays

[0204] Plasmid DNA, verified by sequence analysis, was subcloned into E. coli expression hosts BLR(DE3) or BL21(DE3) (Novagen, Madison, Wis.). The cultures were grown and the plasmids were isolated using Qiagen miniprep kit, and analyzed by restriction digest to confirm identity.

[0205] Induction was initially performed with L. amylovorus araT, B. subtilis araT, and S. meliloti tatA in both BLR(DE3) and BL21(DE3) cells. A time course study was performed with cultures grown in LB containing kanamycin (30 mg/L) to an OD600 of 0.5-0.8 and induced with 1 mM IPTG (isopropyl thiogalacatoside) and sampled at 0, 1, 2, and 4 hours post induction. Cells from 2.0 mL were resuspended in 0.10 mL 120 mM Tris-HCl, pH 6.8 containing 10% sodium dodecyl sulfate, 10% 2-mercaptoethanol, and 20% glycerol, heated at 95° C. for 10 min, and cooled, and diluted with 0.10 mL H2O. Aliquots of these total cellular protein samples were analyzed by SDS-PAGE using a 4-15% gradient gel. There were no significant differences in the amount of protein expressed between the 2 hour and 4 hour induction, nor between the BLR(DE3) and BL21(DE3) cells.

[0206] Cell extracts were also prepared from the 4 hour samples by suspending cell pellets from 2 mL of culture in 0.25 mL Novagen BugBuster™ reagent containing 0.25 μL benzonase nuclease, incubating at room temperature for 20 minutes with gentle shaking, and centrifuging at 16,000×g to remove cell debris. The supernatants (cell extracts) were loaded onto 4-15% gradient gels for analysis of the cellular soluble proteins.

[0207] The three clones, (L. amylovorus araT (SEQ ID NOS: 11 and 12), B. subtilis araT (SEQ ID NOS: 9 and 10), and S. meliloti tatA (SEQ ID NOS: 1 and 2) showed soluble protein that corresponded to the correct size (approximately 45 kDa). The B. subtilis araT gene product was over-expressed at the highest level and/or was more soluble than the other two gene products.

[0208] In subsequent expression methods, plasmid DNA from positive clones was subcloned into BL21(DE3) due to the better growth characteristics of this host. Induction was repeated using 1 mM IPTG with cultures grown in LB containing kanamycin at 50 mg/L, inducing when the OD600 reached approximately 0.8. Cells were harvested after 4 hours of growth at 37° C., centrifuged at 3000 rpm for 10 minutes (4° C.), washed with TEGGP buffer (50 mM Tris-HCl (pH 7.0), 0.5 mM EDTA, 100 mg/L glutathione, 5% glycerol, with Roche complete protease inhibitor cocktail), and flash frozen in −80° C. ethanol.

[0209] Samples were resuspended in 5 mL/g wet cell weight of BugBuster™ (Novagen) reagent containing 5 μL/mL protease inhibitor cocktail set #3 (Calbiochem-Novabiochem Corp., San Diego, Calif.) and 1 μL/mL benzonase nuclease. Samples were incubated at room temperature for 20 minutes on an orbital shaker. Insoluble cell debris was removed by centrifugation at 16,000×g for 20 minutes at 4° C.

[0210] Cell extracts were analyzed by SDS-PAGE, and assayed for tryptophan aminotransferase activity by following production of indole-pyruvic acid using the following protocol. One mL reactions were carried out in 50 mM sodium tetraborate (pH 8.5), 0.5 mM EDTA, 0.5 mM sodium arsenate, 50 μM pyridoxal phosphate, 5 mM α-ketoglutarate, and 5 mM L-tryptophan. The reactions were initiated by the addition of cell free extracts or purified enzyme and were incubated 30 minutes at 30° C. 20% TCA (200 μL) was added to stop the reaction, and the precipitated protein was removed by centrifugation. The absorbance at 327 nm was measured and compared to a standard curve of freshly prepared indole-3-pyruvate in the assay buffer. Control reactions without the substrate tryptophan or using cell-free extracts from clones transformed with pET30a alone were also performed.

[0211] Due to background from the native E. coli aminotransferases in cell extracts, recombinant proteins were purified using His-Bind cartridges following manufacturer's protocols (Novagen, Madison, Wis.). The eluent fractions were desalted on PD-10 (Amersham Biosciences, Piscataway, N.J.) columns and eluted in 50 mM Tris, pH 7.0. Purified proteins were analyzed by SDS-PAGE and assayed for aminotransferase activity.

[0212] Results from the 37° C. induction with 1 mM IPTG (4 hours) demonstrate that L. major bsat, S. meliloti tatA, E. coli aspC, and both R. sphaeroides tatA clones have significant levels of tryptophan aminotransferase activity. The araT protein from B. subtilis was over-expressed and soluble, but showed little enzymatic activity. The L. amylovorus araT gene product appeared to be soluble in the cell extract, but purification using a His-Bind cartridge resulted in only small amounts of protein with the correct molecular weight. The msa gene products were insoluble and further expression experiments were done at 24° C. to minimize inclusion body formation. Several concentrations of IPTG between 10 μM and 1 mM were used to maximize the amount of soluble protein.

[0213] Table 1 lists the specific activities measured in micrograms of indole-3-pyruvate (13P) formed per milligram protein per minute. In some cases, very small amounts of recombinant protein showed high levels of activity above the effective linear range of the assay. In these cases a ‘>’ precedes the specific activity number.

11TABLE 1Specific Activities of Clones in Cell Extracts (CE) and Purified (P)and Commercial EnzymesSpecific ActivityEnzyme(μg I3P/mg protein/min)NoteL. major bsat CE>49.3L. major bsat P>4280S. meliloti tatA CE>28.6S. meliloti tatA P>9312.4.1 tatA CE>41.22.4.1 tatA P108635053 tatA CE>62.335053 tatA P>486L. amylovorus araT CE1.26L. amylovorus araT P0little protein after His-Bind cartridgeB. subtilis araT CE0undetectableB. subtilis araT P1.5-4.52.4.1 msa CE2.05very little soluble protein2.4.1 msa P0no protein after His-Bind cartridge35053 msa CE3.97very little soluble protein35053 msa P0no protein after His-Bind cartridgeE. coli aspC (P)800E. coli tyrB (P)1not very solubleB. subtilis D-aminotransf.(P)2.7using D-tryptophan as substratebroad range transaminase22Sigma cat # T 7684Porcine type II-A1.5Sigma G7005Porcine type I1Sigma G2751

[0214] An alignment comparing all of the recombinant proteins cloned illustrates that there are not many highly conserved areas between the araT, tatA, bsat, and msa sequences. An alignment of highest activity recombinant proteins: Rhodobacter tatA gene product homologs, L. major broad substrate aminotransferase, and the Sinorhizobium meliloti tyrosine aminotransferase showed several conserved regions, however they are only approximately 30-43% identical at the protein level. The availability of the broad range, D-specific (D-alanine) aminotransferase can be useful in the production of other stereoisomers of monatin.

EXAMPLE 2

[0215] Conversion of Indole-3-lactate to Indole-3-pyruvate

[0216] As shown in FIGS. 1 and 3, indole-3-lactic acid can be used to produce indole-3-pyruvate. Conversion between lactic acid and pyruvate is a reversible reaction, as is conversion between indole-3-pyruvate and indole-3-lactate. The oxidation of indole-lactate was typically followed due to the high amount of background at 340 nm from indole-3-pyruvate.

[0217] The standard assay mixture contained 100 mM potassium phosphate, pH 8.0, 0.3 mM NAD+, 7 units of lactate dehydrogenase (LDH) (Sigma-L2395, St. Louis, Mo.), and 2 mM substrate in 0.1 mL. The assay was performed in duplicate in a UV-transparent microtiter plate, using a Molecular Devices SpectraMax Plus platereader. Polypeptide and buffer were mixed and pipetted into wells containing the indole-3-lactic acid and NAD+ and the absorbance at 340 nm of each well was read at intervals of 9 seconds after brief mixing. The reaction was held at 25° C. for 5 minutes. The increase in absorbance at 340 nm follows the production of NADH from NAD+. Separate negative controls were performed without NAD+ and without substrate. D-LDH from Leuconostoc mesenteroides (Sigma catalog number L2395) appeared to exhibit more activity with the indole-derivative substrates than did L-LDH from Bacillus stearothermophilus (Sigma catalog number L5275).

[0218] Similar methods were utilized with D-lactic acid and NAD+ or NADH and pyruvate, the natural substrates of D-LDH polypeptides. The Vmax for the reduction of pyruvate was 100-1000 fold higher than the Vmax for the oxidation of lactate. The Vmax for the oxidation reaction of indole-3-lactic with D-LDH was approximately one-fifth of that with lactic acid. The presence of indole-3-pyruvate was also measured by following the change in absorbance at 327 (the enolborate derivative) using 50 mM sodium borate buffer containing 0.5 mM EDTA and 0.5 mM sodium arsenate. Small, but repeatable, absorbance changes were observed, as compared to the negative controls for both L and D-LDH polypeptides.

[0219] Additionally, broad specificity lactate dehydrogenases (enzymes with activity associated with EC 1.1.1.27, EC 1.1.1.28, and/or EC 1.1.2.3), can be cloned and used to make indole-3-pyruvate from indole-3-lactic acid. Sources of broad specificity dehydrogenases include E. coli, Neisseria gonorrhoeae, and Lactobacillus plantarum.

[0220] Alternatively, indole-3-pyruvate can be produced by contacting indole-3-lactate with cellular extracts from Clostridium sporogenes which contain an indolelactate dehydrogenase (EC 1.1.1.110); or Trypanosoma cruzi epimastigotes cellular extracts which contain p-hydroxyphenylactate dehydrogenase (EC 1.1.1.222) known to have activity on indole-3-pyruvate; or Pseudomonas acidovorans or E. coli cellular extracts, which contain an imidazol-5-yl lactate dehydrogenase (EC 1.1.1.111); or Coleus blumei, which contains a hydroxyphenylpyruvate reductase (EC 1.1.1.237); or Candida maltosa which contains a D-aromatic lactate dehydrogenase (EC 1.1.1.222). References describing such activities include, Nowicki et al. (FEMS Microbiol Lett 71:119-24, 1992), Jean and DeMoss (Canadian J. Microbiol. 14 1968, Coote and Hassall (Biochem. J. 111: 237-9, 1969), Cortese et al. (C.R. Seances Soc. Biol. Fil. 162 390-5, 1968), Petersen and Alfermann (Z. Naturforsch. C: Biosci. 43 501-4, 1988), and Bhatnagar et al. (J. Gen Microbiol 135:353-60, 1989). In addition, a lactate oxidase such as the one from Pseudomonas sp. (Gu et al. J. Mol. Catalysis B: Enzymatic: 18:299-305, 2002), can be utilized for oxidation of indole-3-lactic to indole-3-pyruvate.

EXAMPLE 3

[0221] Conversion of L-tryptophan to Indole-3-pyruvate Utilizing L-amino Acid Oxidase

[0222] This example describes methods used to convert tryptophan to indole-3-pyruvate via an oxidase (EC 1.4.3.2), as an alternative to using a tryptophan aminotransferase as described in Example 1. L-amino acid oxidase was purified from Crotalus durissus (Sigma, St. Louis, Mo., catalog number A-2805). The accession numbers of L-amino acid oxidases for molecular cloning include: CAD21325.1, AAL14831, NP—490275, BAB78253, A38314, CAB71136, JE0266, T08202, S48644, CAC00499, P56742, P81383, 093364, P81382, P81375, S62692, P23623, AAD45200, AAC32267, CAA88452, AP003600, and Z48565.

[0223] Reactions were performed in microcentrifuge tubes in a total volume of 1 mL, incubated for 10 minutes while shaking at 37° C. The reaction mix contained 5 mM L-tryptophan, 100 mM sodium phosphate buffer pH 6.6, 0.5 mM sodium arsenate, 0.5 mM EDTA, 25 mM sodium tetraborate, 0.016 mg catalase (83 U, Sigma C-3515), 0.008 mg FAD (Sigma), and 0.005-0.125 Units of L-amino acid oxidase. Negative controls contained all components except tryptophan, and blanks contained all components except the oxidase. Catalase was used to remove the hydrogen peroxide formed during the oxidative deamination. The sodium tetraborate and arsenate were used to stabilize the enol-borate form of indole-3-pyruvate, which shows a maximum absorbance at 327 nm. Indole-3-pyruvate standards were prepared at concentrations of 0.1-1 mM in the reaction mix.

[0224] The purchased L-amino acid oxidase had a specific activity of 540 μg indole-3-pyruvate formed per minute per mg protein. This is the same order of magnitude as the specific activity of tryptophan aminotransferase enzymes.

EXAMPLE 4

[0225] Converting Indole-3-pyruvate to 2-hydroxy 2-(indol-3-ylmethyl)-4-keto glutaric Acid with an Aldolase

[0226] This example describes methods that can be used to convert indole-3-pyruvate to the 2-hydroxy 2-(indol-3-ylmethyl)-4-keto glutaric acid monatin precursor (MP) using an aldolase (lyase) (FIG. 2). Aldol condensations are reactions that form carbon-carbon bonds between the β-carbon of an aldehyde or ketone and the carbonyl carbon of another aldehyde or ketone. A carbanion is formed on the carbon adjacent to the carbonyl group of one substrate, and serves as a nucleophile attacking the carbonyl carbon of the second substrate (the electrophilic carbon). Most commonly, the electrophilic substrate is an aldehyde, so most aldolases fall into EC 4.1.2.-category. Quite often, the nucleophilic substrate is pyruvate. It is less common for aldolases to catalyze the condensation between two keto-acids or two aldehydes.

[0227] However, aldolases that catalyze the condensation of two carboxylic acids have been identified. For example, EP 1045-029 describes the production of L-4-hydroxy-2-ketoglutaric acid from glyoxylic acid and pyruvate using a Pseudomonas culture (EC 4.1.3.16). In addition, 4-hydroxy-4-methyl-2-oxoglutarate aldolase (4-hydroxy-4-methyl-2-oxoglutarate pyruvate lyase, EC 4.1.3.17) can catalyze the condensation of two keto acids. Therefore, similar aldolase polypeptides were used to catalyze the condensation of indole-3-pyruvate with pyruvate.

[0228] Cloning

[0229] 4-Hydroxy-4-methyl-2-oxoglutarate pyruvate lyases (ProA aldolase, EC 4.1.3.17) and 4-hydroxy-2-oxoglutarate glyoxylate-lyase (KHG aldolase, EC 4.1.3.16) catalyze reactions very similar to the aldolase reaction of FIG. 2. Primers were designed with compatible overhangs for the pET30 Xa/LIC vector (Novagen, Madison, Wis.). The design of these primers is described above in Example 1.

[0230] The following primers were designed for pET30 Xa/LIC cloning:

[0231] 1. Pseudomonas straminea proA gene (Genbank Accession No.: 12964663 Version: 12964663) and Comamonas testosteroni proA gene (SEQ ID NOS: 65-66, nucleic acid sequence and amino acid sequence, respectively)

12forward5′-GGTATTGAGGGTCGCATGTACGAACTGGGAGTTGT-3′ andreverse5′-AGAGGAGAGTTAGAGCCTTAGTCAATATATTTCAGGC-3′.(SEQ ID NOS: 55 and 56)

[0232] 2. Sinorhizobium meliloti 1021 SMc00502 gene (homologous to proA, Genbank Accession Nos.: 15074579 and CAC46344, nucleic acid sequence and amino acid sequence, respectively) forward 5′-GGTATTGAGGGTCGCATGAGCGTGGTTCACCGGAA-3′ and reverse 5′-AGAGGAGAGTTAGAGCCTCAATCGATATATTTCAGTC-3′ (SEQ ID NOS: 61 and 62).

[0233] 3. Sphingomonas sp. LB126 fldZ gene (Genbank Accession No.: 7573247 Version: 7573247, codes for a putative acyl transferase)

13forward5′-GGTATTGAGGGTCGCATGTCCGGCATCGTTGTCCA-3′ andreverse5′-AGAGGAGAGTTAGAGCCTCAGACATATTTCAGTCCCA-3′.(SEQ ID NOS: 57 and 58)

[0234] 4. Arthrobacter keyseri pcmE gene (Genbank Accession No.: AF331043 Version: AF331043.1, codes for an oxalocitramalate aldolase)

14forward5′-GGTATTGAGGGTCGCATGCGACTGAACAACCTCGG-3′ andreverse5′-AGAGGAGAGTTAGAGCCTCAGTTCTCCACGTATTCCA-3′.(SEQ ID NOS: 59 and 60)

[0235] 5. Yersiniapestis strain C092 YP00082 gene (Genbank Accession No.: 15978115 Version: 15978115, codes for a possible transferase)

15forward5′-GGTATTGAGGGTCGCATGAGCCTGGTTAATATGAA-3′ andreverse5′-AGAGGAGAGTTAGAGCCTTATGACTTTAACGCGTTGA-3′.(SEQ ID NOS: 63 and 64)

[0236] 6. Bacillus subtilis khg gene (Genbank Accession Nos. Z99115.1 GI:2634478, 126711-127301and CAB14127.1, nucleic acid sequence and amino acid sequence, respectively)

16forward5′-GGTATTGAGGGTCGCATGGAGTCCAAAGTCGTTGA-3′ andreverse5′-AGAGGAGAGTTAGAGCCTTACACTTGGAAAACAGCCT-3′.(SEQ ID NOS: 35 and 36)

[0237] 7. E. coli khg gene (Genbank Accession Nos. .AE000279.1 1331-1972 and AAC74920. 1, nucleic acid and amino acid sequence, respectively)

17forward5′-GGTATTGAGGGTCGCATGAAAAACTGGAAAACAAG-3′ andreverse5′-AGAGGAGAGTTAGAGCCTTACAGCTTAGCGCCTTCTA-3′.(SEQ ID NOS: 37 and 38)

[0238] 8. S. meliloti khg gene (Genbank Accession Nos. AL591792.1 GI:15075850, 65353-64673 and CAC47463.1, nucleic acid and amino acid sequence, respectively)

18forward5′-GGTATTGAGGGTCGCATGCGAGGGGCATTATTCAA-3′ andreverse5′-AGAGGAGAGTTAGAGCCTCAGCCCTTGAGCGCGAAG-3′.(SEQ ID NOS: 39 and 40)

[0239] Genomic DNA from the organisms described in 1-2 and 6-8, above, was purified using the Qiagen genomic-tip protocol. Using similar techniques the genomic DNA from organisms described in 3-5 can be purified.

[0240]

Pseudomonas straminea
(ATCC 33636) was grown at 30° C. in Nutrient Broth and hydroxybenzoate medium. Comamonas testosteroni (ATCC 49249) was grown at 26° C. in Nutrient Broth and hydroxybenzoate medium. Sphingomonas sp. LB 126 (Flemish Institute for Technological Research,VITO, B-2400 Mol, Belgium) is grown according to the method described by Wattiau et al. (Research in Microbiol. 152:861-72, 2001). Arthrobacter keyseri (Gulf Ecology Division, National Health and Environmental Effects Research Laboratory, U.S. Environmental Protection Agency, Gulf Breeze, Fla. 32561, USA) is grown according to the protocol described by Eaton (J. Bacteriol. 183:3689-3703, 2001). Sinorhizobium meliloti 1021 (ATCC 51124) was grown at 26° C. in ATCC TY medium and hydroxybenzoate medium. Yersinia pestis strain C092 (ATCC) is grown at 26° C. in ATCC medium 739 Horse blood agar. Bacillus subtilis 6051 (ATCC) was grown at 30° C. in Bereto Nutrient Broth (Difco; Detroit, Mich.). E. coli genomic DNA was isolated from strain DH10B (Invitrogen) as described in Example 1.

[0241] The PCR, cloning, and screening protocols described in Example 1 were used to clone the C. testosteroni and the S. meliloti proA sequences, as well as the E. coli, B. subtilis, and S. meliloti khg sequences. The same methods can be used to clone the other sequences described above.

[0242] Positive clones were sequenced using dideoxy chain termination sequencing (Seqwright, Houston, Tex.) with S-tag and T7 terminator primers (Novagen), and internal primers from Integrated DNA Technologies, Inc. (Coralville, Iowa).

[0243] Expression and Activity Assays

[0244] Plasmid DNA (verified by sequence analysis) was subcloned into expression host BL21(DE3) (Novagen). The cultures were grown in LB medium with 50 mg/L kanamycin, the plasmids isolated using a Qiagen spin plasmid miniprep kit and subsequently analyzed by restriction digest to confirm identity. Induction experiments were done with the BL21(DE3) constructs grown in LB medium containing 50 mg/L kanamycin at 37° C. Protein expression was induced using 0.1 mM IPTG after the OD600 reached approximately 0.6. The cells were grown for 4 hours at 30° C. and harvested by centrifugation. The cells were then lysed using Bugbuster™ reagent (Novagen) and the His-tag recombinant proteins were purified using His-Bind cartridges as described above (Example 1). Purified proteins were desalted on PD-10 disposable columns and eluted in 50 mM Tris-HCl buffer, pH 7.3 with 2 mM MgCl2.

[0245] The proteins were analyzed by SDS-PAGE on 4-15% gradient gels to detect soluble protein levels at the predicted MW of the recombinant fusion protein.

[0246] The proteins were assayed for activity using indole-3-pyruvate and sodium pyruvate as substrates. The assay mixture contained 100 mM Tris-HCl (pH 7-pH 8.9), 0-8 mM MgCl2, 3 mM potassium phosphate (pH 8), and 6 mM of each substrate in 1 mL. The reaction was started by adding varying amounts of polypeptide (for example from 10 to 100 μg), and was incubated at 25° C.-37° C. for 30 minutes, filtered, and then frozen at −80 ° C.

[0247] Activity Results with proA Gene Products

[0248] Both the C. testosteroni proA and S. meliloti SMc00502 gene constructs had high levels of expression when induced with IPTG. The recombinant proteins were highly soluble, as determined by SDS-PAGE analysis of total protein and cellular extract samples. The C. testosteroni gene product was purified to >95% purity. Because the yield of the S. meliloti gene product was very low after affinity purification using a His-Bind cartridge, cellular extract was used for the enzymatic assays.

[0249] Both recombinant aldolases catalyzed the formation of MP from indole-3-pyruvate and pyruvate. The presence of both divalent magnesium and potassium phosphate were required for enzymatic activity. No product was apparent when indole-3-pyruvate, pyruvate, or potassium phosphate was absent. A small amount of the product was also formed in the absence of enzyme (typically one order of magnitude less than when enzyme was present).

[0250] The product peak eluted from the reverse phase C 18 column slightly later than the indole-3-pyruvate standard, the mass spectrum of this peak showed a collisionally-induced parent ion ([M +H]+) of 292.1, the parent ion expected for the product MP. The major daughter fragments present in the mass spectrum included those with m/z=158 (1H-indole-3-carbaldehyde carbonium ion), 168 (3-buta-1,3-dienyl-1H-indole carbonium ion), 274 (292-H2O), 256 (292-2 H2O), 238 (292-3 H2O), 228 (292-CH4O3), and 204 (loss of pyruvate). The product also exhibited a UV spectrum characteristic of other indole-containing compounds such as tryptophan, with the λmax of 279-280 and a small shoulder at approximately 290 nm.

[0251] The amount of MP produced by the C. testosteroni aldolase increased with an increase in reaction temperature from room temperature to 37° C., amount of substrate, and amount of magnesium. The synthetic activity of the enzyme decreased with increasing pH, the maximum product observed was at pH 7. Based on tryptophan standards, the amount of MP produced under a standard assay using 20 μg of purified protein was approximately 10-40 μg per one mL reaction.

[0252] Due to the high degree of homology of the S. meliloti and C. testosteroni ProA aldolase coding sequences with the other genes described above, it is expected that all of the recombinant gene products can catalyze this reaction. Moreover, it is expected that aldolases that have threonine (T) at positions 59 and 87, arginine (R) at 119, aspartate (D) at 120, and histidine (H) at 31 and 71, (based on the numbering system of C. testosteroni) will have similar activity.

[0253] Activity Results with khg Gene Products

[0254] Both the B. subtilis and E. coli khg gene constructs had high levels of expression of protein when induced with IPTG, while the S. meliloti khg had a lower level of expression. The recombinant proteins were highly soluble, as judged by SDS-PAGE analysis of total proteins and cellular extracts. The B. subtilis and E. coli khg gene products were purified to >95% purity; the yield of the S. meliloti gene product was not as high after affinity purification using a His-Bind cartridge.

[0255] There is no evidence that magnesium and phosphate are required for activity for this enzyme. However, the literature reports performing the assays in sodium phosphate buffer, and the enzyme reportedly is bifunctional and has activity on phosphorylated substrates such as 2-keto-3-deoxy-6-phosphogluconate (KDPG). The enzymatic assays were performed as described above, and in some instances the phosphate was omitted. The results indicate that the recombinant KHG aldolases produced MP, but were not as active as the ProA aldolases. In some cases the level of MP produced by KHG was almost identical to the amount produced by magnesium and phosphate alone. Phosphate did not appear to increase the KHG activities. The Bacillus enzyme had the highest activity, approximately 20-25% higher activity than the magnesium and phosphate alone, as determined by SRM (see Example 10). The Sinorhizobium enzyme had the least amount of activity, which may be associated with folding and solubility problems noted in the expression. All three enzymes have the active site glutamate (position 43 in B. subtilis numbering system) as well as the lysine required for Shiff base formation with pyruvate (position 130); however, the B. subtilis enzyme contains a threonine in position 47, an active site residue, rather than arginine. The B. subtilis KHG is smaller and appears to be in a cluster distinct from the S. meliloti and E. coli enzymes, with other enzymes having the active site threonine. The differences in the active site may be the reason for the increased activity of the B. sublilis enzyme.

[0256] Improvement of Aldolase Activity

[0257] Catalytic antibodies can be as efficient as natural aldolases, accept a broad range of substrates, and can be used to catalyze the reaction shown in FIG. 2.

[0258] Aldolases can also be improved by directed evolution, for example as previously described for a KDPG aldolase (highly homologous to KHG described above) evolved by DNA shuffling and error-prone PCR to remove the requirement for phosphate and to invert the enantioselectivity. The KDPG aldolase polypeptides are useful in biochemical reactions since they are highly specific for the donor substrate (herein, pyruvate), but are relatively flexible with respect to the acceptor substrate (i.e. indole-3-pyruvate) (Koeller & Wong, Nature 409:232-9, 2001). KHG aldolase has activity for condensation of pyruvate with a number of carboxylic acids. Mammalian versions of the KHG aldolase are thought to have broader specificity than bacterial versions, including higher activity on 4-hydroxy 4-methyl 2-oxoglutarate and acceptance of both stereoisomers of 4-hydroxy-2-ketoglutarate. Bacterial sources appear to have a 0-fold preference for the R isomer. There are nearly 100 KHG homologs available in genomic databases, and activity has been demonstrated in Pseudomonas, Paracoccus, Providencia, Sinorhizobium, Morganella, E. coli, and mammalian tissues. These enzymes can be used as a starting point for tailoring the enantiospecificity that is desired for monatin production.

[0259] Aldolases that utilize pyruvate and another substrate that is either a keto acid and/or has a bulky hydrophobic group like indole can be “evolved” to tailor the polypeptide's specificity, speed, and selectivity. In addition to KHG and ProA aldolases demonstrated herein, examples of these enzymes include, but are not limited to: KDPG aldolase and related polypeptides (KDPH); transcarboxybenzalpyruvate hydratase-aldolase from Nocardioides st; 4-(2-carboxyphenyl)-2-oxobut-3-enoate aldolase (2′-carboxybenzalpyruvate aldolase) which condenses pyruvate and 2-carboxybenzaldehyde (an aromatic ring-containing substrate); trans-O-hydroxybenzylidenepyruvate hydratase-aldolase from Pseudomonas putida and Sphingomonas aromaticivorans, which also utilizes pyruvate and an aromatic-containing aldehyde as substrates; 3-hydroxyaspartate aldolase (erythro-3-hydroxy-L-aspartate glyoxylate lyase), which uses 2-oxo acids as the substrates and is thought to be in the organism Micrococcus denitrificans; benzoin aldolase (benzaldehyde lyase), which utilizes substrates containing benzyl groups; dihydroneopterin aldolase; L-threo-3-phenylserine benzaldehyde-lyase (phenylserine aldolase) which condenses glycine with benzaldehyde; 4-hydroxy-2-oxovalerate aldolase; 1,2-dihydroxybenzylpyruvate aldolase; and 2-hydroxybenzalpyruvate aldolase.

[0260] A polypeptide having the desired activity can be selected by screening clones of interest using the following methods. Tryptophan auxotrophs are transformed with vectors carrying the clones of interest on an expression cassette and are grown on a medium containing small amounts of monatin or MP. Since aminotransferases and aldolase reactions are reversible, the cells are able to produce tryptophan from a racemic mixture of monatin. Similarly, organisms (both recombinant and wildtype) can be screened by ability to utilize MP or monatin as a carbon and energy source. One source of target aldolases is expression libraries of various Pseudomonas and rhizobacterial strains. Pseudomonads have many unusual catabolic pathways for degradation of aromatic molecules and they also contain many aldolases; whereas the rhizobacteria contain aldolases, are known to grow in the plant rhizosphere, and have many of the genes described for construction of a biosynthetic pathway for monatin.

EXAMPLE 5

[0261] Chemical Synthesis of the Monatin Precursor

[0262] Example 4 described a method of using an aldolase to convert indole-3-pyruvate to the 2-hydroxy 2-(indol-3-ylmethyl)-4-keto glutaric acid monatin precursor (MP). This example describes an alternative method of chemically synthesizing MP.

[0263] The MP is formed by using a typical aldol-type condensation (FIG. 4). Briefly, a typical aldol-type reaction involves the generation of a carbanion of the pyruvate ester using a strong base, such as LDA (lithium diisopropylamide), lithium hexamethyldisilazane or butyl lithium. The carbanion that is generated reacts with the indole-pyruvate to form the coupled product.

[0264] Protecting groups that can be used for protecting the indole nitrogen include, but are not limited to: t-butyloxycarbonyl (Boc), and benzyloxycarbonyl (Cbz). Blocking groups for carboxylic acids include, but are not limited to, alkyl esters (for example, methyl, ethyl, benzyl esters). When such protecting groups are used, it is not possible to control the stereochemistry of the product that is formed. However, if R2 and/or R3 are chiral protecting groups (FIG. 4), such as (S)-2-butanol, menthol, or a chiral amine, this can favor the formation of one MP enantiomer over the other.

EXAMPLE 6

[0265] Conversion of Tryptophan or Indole-3-Pyruvate to Monatin

[0266] An in vitro process utilizing two enzymes, an aminotransferase and an aldolase, produced monatin from tryptophan and pyruvate. In the first step alpha-ketoglutarate was the acceptor of the amino group from tryptophan in a transamination reaction generating indole-3-pyruvate and glutamate. An aldolase catalyzed the second reaction in which pyruvate was reacted with indole-3-pyruvate, in the presence of Mg2+ and phosphate, generating the alpha-keto derivative of monatin (MP), 2-hydroxy-2-(indol-3-ylmethyl)-4-ketoglutaric acid. Transfer of the amino group from the glutamate formed in the first reaction produced the desired product, monatin. Purification and characterization of the product established that the isomer formed was S,S-monatin. Alternative substrates, enzymes, and conditions are described as well as improvements that were made to this process.

[0267] Enzymes

[0268] The aldolase, 4-hydroxy-4-methyl-2-oxoglutarate pyruvate lyase (ProA aldolase, proA gene) (EC 4.1.3.17) from Comamonas testosteroni was cloned, expressed and purified as described in Example 4. The 4-hydroxy-2-oxoglutarate glyoxylate lyases (KHG aldolases) (EC 4.1.3.16) from B. subtilis, E. coli, and S. meliloti were cloned, expressed and purified as described in Example 4.

[0269] The aminotransferases used in conjunction with the aldolases to produce monatin were L-aspartate aminotransferase encoded by the E. coli aspC gene, the tyrosine aminotransferase encoded by the E. coli tyrB gene, the S. meliloti TatA enzyme, the broad substrate aminotransferase encoded by the L. major bsat gene, or the glutamic-oxaloacetic transaminase from pig heart (Type IIa). The cloning, expression and purification of the non-mammalian proteins are described in Example 1. Glutamic-oxaloacetic transaminase from pig heart (type IIa) was obtained from Sigma (# G7005).

[0270] Method using ProA aldolase and L-aspartate aminotransferase

[0271] The reaction mixture contained 50 mM ammonium acetate, pH 8.0, 4 mM MgCl2, 3 mM potassium phosphate, 0.05 mM pyridoxal phosphate, 100 mM ammonium pyruvate, 50 mM tryptophan, 10 mM alpha-ketoglutarate, 160 mg of recombinant C. testosteroni ProA aldolase (unpurified cell extract, ˜30% aldolase), 233 mg of recombinant E. coli L-aspartate aminotransferase (unpurified cell extract, ˜40% aminotransferase) in one liter. All components except the enzymes were mixed together and incubated at 30° C. until the tryptophan dissolved. The enzymes were then added and the reaction solution was incubated at 30° C. with gentle shaking (100 rpm) for 3.5 hours. At 0.5 and I hour after the addition of the enzymes aliquots of solid tryptophan (50 mmoles each) were added to the reaction. All of the added tryptophan did not dissolve, but the concentration was maintained at 50 mM or higher. After 3.5 hours, the solid tryptophan was filtered off. Analysis of the reaction mixture by LC/MS using a defined amount of tryptophan as a standard showed that the concentration of tryptophan in the solution was 60.5 mM and the concentration of monatin was 5.81 mM (1.05 g).

[0272] The following methods were used to purify the final product. Ninety percent of the clear solution was applied to a column of BioRad AG50W-X8 resin (225 mL; binding capacity of 1.7 meq/mL). The column was washed with water, collecting 300 mL fractions, until the absorbance at 280 nm was <5% of the first flow through fraction. The column was then eluted with 1 M ammonium acetate, pH 8.4, collecting 4 300-mL fractions. All 4 fractions contained monatin and were evaporated to 105 mL using a roto-evaporator with a tepid water bath. A precipitate formed as the volume reduced and was filtered off over the course of the evaporation process.

[0273] Analysis of the column fractions by LC/MS showed that 99% of the tryptophan and monatin bound to the column. The precipitate that formed during the evaporation process contained >97% tryptophan and <2% of monatin. The ratio of tryptophan to product in the supernatant was approximately 2:1.

[0274] The supernatant (7 ml) was applied to a 100 mL Fast Flow DEAE Sepharose (Amersham Biosciences) column previously converted to the acetate form by washing with 0.5 L 1 M NaOH, 0.2 L water, 1.0 L of 1.0 M ammonium acetate, pH 8.4, and 0.5 L water. The supernatant was loaded at <2 mL/min and the column was washed with water at 3-4 mL/min until the absorbance at 280 nm was ˜0. Monatin was eluted with 100 mM ammonium acetate, pH 8.4, collecting 4 100-mL fractions.

[0275] Analysis of the fractions showed that the ratio of tryptophan to monatin in the flow through fractions was 85:15 and the ratio in the eluent fractions was 7:93. Assuming the extinction coefficient at 280 nm of monatin is the same as tryptophan, the eluent fractions contained 0.146 mmole of product. Extrapolation to the total 1 L reaction would produce ˜2.4 mmoles (˜710 mg) of monatin, for a recovery of 68%.

[0276] The eluent fractions from the DEAE Sepharose column were evaporated to <20 mL. An aliquot of the product was further purified by application to a C8 preparative reversed-phase column using the same chromatographic conditions as those described in Example 10 for the analytical-scale monatin characterization. Waters Fractionlynx™ software was employed to trigger automated fraction collection of monatin based on detection of the m/z=293 ion. The fraction from the C8 column with the corresponding protonated molecular ion for monatin was collected, evaporated to dryness, and then dissolved in a small volume of water. This fraction was used for characterization of the product.

[0277] The resulting product was characterized using the following methods.

[0278] UV/Visible Spectroscopy. UV/visible spectroscopic measurements of monatin produced enzymatically were carried out using a Cary 100 Bio UV/visible spectrophotometer. The purified product, dissolved in water, showed an absorption maximum of 280 nm with a shoulder at 288 nm, characteristics typical of indole containing compounds.

[0279] LC/MS Analysis. Analyses of mixtures for monatin derived from the in vitro biochemical reactions were carried out as described in Example 10. A typical LC/MS analysis of monatin in an in vitro enzymatic synthetic mixture is illustrated in FIG. 5. The lower panel of FIG. 5 illustrates a selected ion chromatogram for the protonated molecular ion of monatin at m/z=293. This identification of monatin in the mixture was corroborated by the mass spectrum illustrated in FIG. 6. Analysis of the purified product by LC/MS showed a single peak with a molecular ion of 293 and absorbance at 280 nm. The mass spectrum was identical to that shown in FIG. 6.

[0280] MS/MS Analysis. LC/MS/MS daughter ion experiments, as described in Example 10, were also performed on monatin. A daughter ion mass spectrum of monatin is illustrated in FIG. 7. Tentative structural assignments of all fragment ions labeled in FIG. 7 were made. These include fragment ions of m/z=275 (293−H2O), 257 (293−(2×H2O)), 230 (275−COOH), 212 (257−COOH), 168 (3-buta-1,3-dienyl-1H-indole carbonium ion), 158 (1H-indole-3-carbaldehyde carbonium ion), 144 (3-ethyl-1H-indole carbonium ion), 130 (3-methylene-1H-indole carbonium ion), and 118 (indole carbonium ion). Many of these are the same as those obtained for MP (Example 4), as expected if derived from the indole portion of the molecule. Some are 1 mass unit higher than those seen for MP, due to the presence of an amino group instead of a ketone.

[0281] High Resolution MS analysis. FIG. 8 illustrates the mass spectrum obtained for purified monatin employing an Applied Biosystems-Perkin Elmer Q-Star hybrid quadrupole/time-of-flight mass spectrometer. The measured mass for protonated monatin using tryptophan as an internal mass calibration standard was 293.1144. The calculated mass of protonated monatin, based on the elemental composition C14H17N2O5 is 293.1137. This is a mass measurement error of less than 2 parts per million (ppm), providing conclusive evidence of the elemental composition of monatin produced enzymatically.

[0282] NMR Spectroscopy. The NMR experiments were performed on a Varian Inova 500 MHz instrument. The sample of monatin (˜3 mg) was dissolved in 0.5 ml of D2O. Initially, the solvent (D2O) was used as the internal reference at 4.78 ppm. Since the peak for water was large, the 1H-NMR was run with suppression of the peak for water. Subsequently, due to the broadness of the water peak, the C-2 proton of monatin was used as the reference peak, and set at the published value of 7.192 ppm.

[0283] For 13C-NMR, an initial run of several hundred scans indicated that the sample was too dilute to obtain an adequate 13C spectrum in the allotted time. Therefore, a heteronuclear multiple quantum coherence (HMQC) experiment was performed, which enabled the correlation of the hydrogens and the carbons to which they were attached, and also providing information on the chemical shifts of the carbons.

[0284] A summary of the 1H and HMQC data is shown in Tables 2 and 3. By comparison to published values, the NMR data indicated that the enzymatically produced monatin was either (S,S), (R,R), or a mixture of both.

[0285] Chiral LC/MS Analysis. To establish that the monatin produced in vitro was one isomer, and not a mixture of the (R,R) and (S,S) enantiomers, chiral LC/MS analyses were carried out using the instrumentation described in Example 10.

[0286] Chiral LC separations were made using an Chirobiotic T (Advanced Separations Technology) chiral chromatography column at room temperature. Separation and detection, based on published protocols from the vendor, were optimized for the R-(D) and S-(L) isomers of tryptophan. The LC mobile phase consisted of A) water containing 0.05% (v/v) trifluoroacetic acid; B) Methanol containing 0.05% (v/v) trifluoroacetic acid. The elution was isocratic at 70% A and 30% B. The flow rate was 1.0 mL/min, and PDA absorbance was monitored from 200 nm to 400 nm. The instrumental parameters used for chiral LC/MS analysis of tryptophan and monatin are identical to those described in Example 10 for LC/MS analysis. Collection of mass spectra for the region m/z 150-400 was utilized. Selected ion chromatograms for protonated molecular ions ([M+H]+=205 for both R- and S-tryptophan and [M +H]+=293 for monatin) allowed direct identification of these analytes in the mixtures.

[0287] The chromatograms of R- and S-tryptophan and monatin, separated by chiral chromatography and monitored by MS, are shown in FIG. 9. The single peak in the chromatogram of monatin indicates that the compound is one isomer, with a retention time almost identical to S-tryptophan.

[0288] Table 2: 1H NMR Data

19TABLE 21H NMR data

CargillVleggaar et al.1Takeshi et al.2AtomδHJ(HH) HzδHJ(HH) HzδHJ(HH) Hz 27.192 (1H, s)7.192 (s)7.18 (s) 47.671 (d) 7.997.686 (d) 7.97.67 (d) 8.0 57.104 (dd) 7.997.102 (dd) 8.0, 8.07.11 (dd) 7.5, 7.5 67.178 (dd)*7.176 (dd) 8.0, 8.07.17 (dd) 7.5, 7.5 77.439 (d) 7.997.439 (d) 8.17.43 (d) 8.010a3.242 (d)14.53.243 (d)14.33.24 (d)14.510b3.033 (d)14.53.051 (d)14.33.05 (d)14.5122.626 (dd)15.5, 1.52.651 (dd)15.3, 1.72.62 (dd)15.5, 1.82.015 (dd)15.0, 12.02.006 (dd)15.3, 11.72.01 (dd)15.5, 12.0133.571 (dd)10.75*, 1.53.168 (dd)11.6, 1.83.57 (dd)12.0, 1.81Vleggaar et al. (J. C. S. Perkin Trans. 1:3095-8, 1992). 2Takeshi and Shusuke (JP2002060382, 2002-02-26).

[0289]

20

TABLE 3

13
C NMR data (from HMQC spectrum)

Cargill
Vleggaar et al.1

Atom
δc
δc

2
126.1
126.03

3
*
110.31

4
120.4
120.46

5
120.2
120.25

6
122.8
122.74

7
112.8
112.79

8
*
137.06

9
*
129.23

10a
36.4
36.53

12
39.5
39.31

13
54.9
54.89

14
*
175.30

15
*
181.18

1
Vleggaar et al. (J.C.S. Perkin Trans. 1:3095-8, 1992).

[0290] Polarimetry. The optical rotation was measured on a Rudolph Autopol III polarimeter. The monatin was prepared as a 14.6 mg/mL solution in water. The expected specific rotation ([α]D20) for S,S monatin (salt form) is −49.6 for a 1 g/mL solution in water (Vleggaar et al). The observed [α]D20 was −28.1 for the purified, enzymatically produced monatin indicating that it was the S, S isomer.

[0291] Improvements

[0292] The reaction conditions, including reagent and enzyme concentrations, were optimized and yields of 10 mg/mL were produced using the following reagent mix:

[0293] 50 mM ammonium acetate pH 8.3, 2 mM MgCl2, 200 mM pyruvate (sodium or ammonium salt),

[0294] 5 mM alpha-ketoglutarate (sodium salt), 0.05 mM pyridoxal phosphate,

[0295] deaerated water to achieve a final volume of 1 mL after the addition of the enzymes,

[0296] 3 mM potassium phosphate, 50 μg/mL of recombinant ProA aldolase (cell extract; total protein concentration of 167 μg/mL), 1000 μg/mL of L-aspartate aminotransferase encoded by the E. coli aspC gene (cell extract; total protein concentration of 2500 μg/mL), and solid tryptophan to afford a concentration of >60 mM (saturated; some undissolved throughout the reaction). The mixture was incubated at 30° C. for 4 hours with gentle stirring or mixing.

[0297] Substitutions

[0298] The concentration of alpha-ketoglutarate can be reduced to 1 mM and supplemented with 9 mM aspartate with an equivalent yield of monatin. Alternative amino acid acceptors can be utilized in the first step, such as oxaloacetate.

[0299] When recombinant L. major broad substrate aminotransferase was used in place of the E. coli L-aspartate aminotransferase, similar yields of monatin were achieved. However, a second unidentified product (3-10% of the major product) with a molecular mass of 292 was also detected by LC-MS analysis. Monatin concentrations of 0.1-0.5 mg/mL were produced when the E. coli tyrB encoded enzyme, the S. meliloti tat A encoded enzyme or the glutamic-oxaloacetic transaminase from pig heart (type IIa) was added as the aminotransferase. When starting the reaction from indole-3-pyruvate, a reductive amination can be done for the last step with glutamate dehydrogenase and NADH (as in Example 7). The KHG aldolases from B. subtilis, E. coli, and S. meliloti were also used with the E. coli L-aspartate aminotransferase to produce monatin enzymatically. The following reaction conditions were used: 50 mM NH4—OAc pH 8.3, 2 mM MgCl2, 200 mM pyruvate, 5 mM glutamate, 0.05 mM pyridoxal phosphate, deaerated water to achieve a final volume of 0.5 mL after the addition of the enzymes, 3 mM potassium phosphate, 20 μg/mL of recombinant B. subtilis KHG aldolase (purified), ca. 400 μg/mL of E. coli L-aspartate aminotransferase (AspC) unpurified from cell extract, and 12 mM indole-3-pyruvate. The reactions were incubated at 30° C. for 30 minutes, with shaking. The amount of monatin produced using the B. subtilis enzyme was 80 ng/mL, and increased with increasing amounts of aldolase. If indole-3-pyruvate and glutamate were replaced by saturating amounts of tryptophan and 5 mM alpha-ketoglutarate, the production of monatin was increased to 360 ng/mL. Reactions were repeated with 30 μg/mL of each of the three KHG enzymes in 50 mM Tris pH 8.3, with saturating amounts of tryptophan, and were allowed to proceed for an hour in order to increase detection. The Bacillus enzyme had the highest activity as in Example 4, producing approximately 4000 ng/mL monatin. The E. coli KHG produced 3000 ng/mL monatin, and the S. meliloti enzyme produced 2300 ng/mL.

EXAMPLE 7

[0300] Interconversion Between MP and Monatin

[0301] The amination of MP to form monatin can be catalyzed by aminotransferases such as those identified in Examples 1 and 6, or by dehydrogenases that require a reducing cofactor such as NADH or NADPH. These reactions are reversible and can be measured in either direction. The directionality, when using a dehydrogenase enzyme, can be largely controlled by the concentration of ammonium salts.

[0302] Dehydrogenase activity. The oxidative deamination of monatin was monitored by following the increase in absorbance at 340 nm as NAD(P)+ was converted to the more chromophoric NAD(P)H. Monatin was enzymatically produced and purified as described in Example 6.

[0303] A typical assay mixture contained 50 mM Tris-HCl, pH 8.0 to 8.9, 0.33 mM NAD+ or NADP+, 2 to 22 units of glutamate dehydrogenase (Sigma), and 10-15 mM substrate in 0.2 mL. The assay was performed in duplicate in a UV-transparent microtiter plate, on a Molecular Devices SpectraMax Plus platereader. A mix of the enzyme, buffer, and NAD(P)+ were pipetted into wells containing the substrate and the increase in absorbance at 340 nm was monitored at 10 second intervals after brief mixing. The reaction was incubated at 25° C. for 10 minutes. Negative controls were carried out without the addition of substrate, and glutamate was utilized as a positive control. The type III glutamate dehydrogenase from bovine liver (Sigma # G-7882) catalyzed the conversion of the monatin to the monatin precursor at a rate of conversion approximately one-hundredth the rate of the conversion of glutamate to alpha-ketoglutarate.

[0304] Transamination activity. Monatin aminotransferase assays were conducted with the aspartate aminotransferase (AspC) from E. coli, the tyrosine aminotransferase (TyrB) from E. coli, the broad substrate aminotransferase (BSAT) from L. major, and the two commercially available porcine glutamate-oxaloacetate aminotransferases described in Example 1. Both oxaloacetate and alpha-ketoglutarate were tested as the amino acceptor. The assay mixture contained (in 0.5 mL) 50 mM Tris-HCl, pH 8.0, 0.05 mM PLP, 5 mM amino acceptor, 5 mM monatin, and 25 μg of aminotransferase. The assays were incubated at 30° C. for 30 minutes, and the reactions were stopped by addition of 0.5 mL isopropyl alcohol. The loss of monatin was monitored by LC/MS (Example 10). The highest amount of activity was noted with L. major BSAT with oxaloacetate as the amino acceptor, followed by the same enzyme with alpha-ketoglutarate as the amino acceptor. The relative activity with oxaloacetate was: BSAT>AspC>porcine type IIa>porcine type I=TyrB. The relative activity with alpha-ketoglutarate was: BSAT>AspC>porcine type I>porcine type IIa>TyrB.

EXAMPLE 8

[0305] Production of Monatin from Tryptophan and C3 Sources other than Pyruvate

[0306] As described above in Example 6, indole-3-pyruvate or tryptophan can be converted to monatin using pyruvate as the C3 molecule. However, in some circumstances, pyruvate may not be a desirable raw material. For example, pyruvate may be more expensive than other C3 carbon sources, or may have adverse effects on fermentations if added to the medium. Alanine can be transaminated by many PLP-enzymes to produce pyruvate.

[0307] Tryptophanase-like enzymes perform beta-elimination reactions at faster rates than other PLP enzymes such as aminotransferases. Enzymes from this class (4.1.99.-) can produce ammonia and pyruvate from amino acids such as L-serine, L-cysteine, and derivatives of serine and cysteine with good leaving groups such as O-methyl-L-serine, O-benzyl-L-serine, S-methylcysteine, S-benzylcysteine, S-alkyl-L-cysteine, O-acyl-L-serine, 3-chloro-L-alanine.

[0308] Processes to produce monatin using EC 4.1.99.-polypeptides can be improved by mutating the β-tyrosinase (TPL) or tryptophanase according to the method of Mouratou et al. (J. Biol. Chem 274:1320-5, 1999). Mouratou et al. describe the ability to covert the β-tyrosinase into a dicarboxylic amino acid β-lyase, which has not been reported to occur in nature. The change in specificity was accomplished by converting valine (V) 283 to arginine (R) and arginine (R) 100 to threonine (T). These amino acid changes allow for the lyase to accept a dicarboxylic amino acid for the hydrolytic deamination reaction (such as aspartate). Aspartate, therefore, can also be used as a source of pyruvate for subsequent aldol condensation reactions.

[0309] Additionally, cells or enzymatic reactors can be supplied with lactate and an enzyme that converts lactate to pyruvate. Examples of enzymes capable of catalyzing this reaction include lactate dehydrogenase and lactate oxidase.

[0310] Isolation of Genomic DNA

[0311] Tryptophanase polypeptides have previously been reported in, for example, Mouratou et al. (JBC 274:1320-5, 1999). To isolate genes that encode tryptophanase polypeptides, genomic DNA from E. coli DH10B was used as a template for PCR as described in Example 1.

[0312] The gene for tyrosine-phenol lyase was isolated from C. freundii (ATCC catalog number 8090, Designation ATCC 13316; NCTC 9750) and grown on Nutrient agar (Difco 0001) and nutrient broth (Difco 0003) at 37° C. to an OD of 2.0. The genomic DNA was purified using a Qiagen Genomic-tip™ 100/G kit.

[0313] PCR Amplification of Coding Sequences

[0314] Primers were designed with compatible overhangs for the pET 30 Xa/LIC vector (Novagen, Madison, Wis.) as described above in Example 1.

[0315]

E. coli
tna (SEQ ID NO: 41). N-terminal primer for pET30 Xa/LIC cloning: 5′-GGT ATT GAG GGT CGC ATG GAA AAC TTT AAA CAT CT-3′ (SEQ ID NO: 43). C-terminal primer for pET30 Xa/LIC cloning: 5′-AGA GGA GAG TTA GAG CCT TAA ACT TCT TTA AGT TTT G-3′ (SEQ ID NO: 44).

[0316]

C. freundii
tpl (SEQ ID NO: 42). N-terminal primer for pET30 Xa/LIC cloning: 5′-GGT ATT GAG GGT CGC ATGAATTATCCGGCAGAACC-3′ (SEQ ID NO: 45). C-terminal primer for pET 30 Xa/LIC cloning: 5′-AGA GGA GAG TTA GAG CCTTAGATGTAATCAAAGCGTG-3′ (SEQ ID NO: 46).

[0317] The Eppendorf Mastercycler™ Gradient 5331 Thermal Cycler was used for all PCR reactions. In 50 μL was added 0.5 μg template (genomic DNA), 1.0 μM of each primer, 0.4 mM each dNTP, 3.5 U Expand High Fidelity Polymerase (Roche), 1× Expand buffer with Mg, and 5% DMSO (final concentration). The thermocycler PCR program used was as follows: 96° C. hot start (5 minutes), 94° C.-30 seconds, 40-60° C.-1 minute 45 seconds, 72° C.-2 minutes 15 seconds; 30 repetitions. The final polymerization step was for 7 minutes, and the samples were then stored at 4° C.

[0318] Cloning

[0319] Cloning and positive clone identification procedures detailed above in Example 1 were used to identify the appropriate clones.

[0320] Gene Expression and Activity Assays

[0321] Plasmid DNA (verified by sequence analysis) was subcloned into the expression host BL21(DE3) (Novagen). The cultures were grown in LB medium with 30 mg/L kanamycin, the plasmids were isolated using a Qiagen miniprep kit, and analyzed by restriction digest to confirm identity.

[0322] Induction experiments were done with the BL21(DE3) expression host, the constructs were grown in LB medium containing 50 mg/L kanamycin at 37° C. Protein expression was induced using 0.1 mM IPTG after the OD600 of the culture reached approximately 0.6. The cells were grown for 4 hours at 30° C. and harvested by centrifugation. The cells were then lysed in 5 mL/g wet cell weight BugBuster™ (Novagen) reagent containing 5 μL/mL protease inhibitor cocktail set #III (Calbiochem) and 1 μL/mL benzonase nuclease (Novagen), and the His-tagged recombinant proteins were purified using the His-Bind cartridges as described above in Example 1. Purified proteins were desalted on a PD-10 (G25 Sephadex, Amersham Biosciences) column and eluted in 100 mM Tris-Cl buffer, pH 8.0. The proteins were analyzed by SDS-PAGE on 4-15% gradient gels to check for soluble protein levels at the predicted MW of the recombinant fusion protein.

[0323] Mutagenesis

[0324] Some members of polypeptide class 4.1.99.-(tryptophanase and β-tyrosinase) will perform the beta-lyase reaction with aspartate or similar amino acids without any modification. However, some members of the class may need to be mutagenized to allow for the use of the substrates and/or the creation of the product. Moreover, in some cases polypeptides that can perform the conversion may be further optimized by mutagenesis.

[0325] Site directed mutagenesis was performed based on 3D structure analysis of PLP-binding polypeptides. Two examples for changing the substrate specificity of the polypeptides are shown below.

[0326] Mutagenesis of Tryptophanase Example 1

[0327] The mutagenesis protocol provided below introduced two point mutations in the amino acid sequence. The first point mutation changed arginine (R) at position 103 to threonine (T) and the second point mutation changed valine (V) at position 299 to arginine (R) (numbering system for E. coli mature protein). Mutagenesis experiments were performed by ATG Laboratories (Eden Prairie, Minn.). Mutations were introduced sequentially by PCR of gene fragments and reassembly of the fragments was accomplished by PCR as well. Primers for converting arginine (R)103 to threonine (T): 5′-CCAGGGCACCGGCGCAGAGCAAATCTATATT-3′ (SEQ ID NO: 47) and 5′-TGCGCCGGTGCCCTGGTGAGTCGGAATGGT-3′ (SEQ ID NO: 48).

[0328] Primers for converting valine (V)299 to arginine (R):

21(SEQ ID NO: 49)5′-TCCTGCACGCGGCAAAGGGTTCTGCACTCGGT-3′ and(SEQ ID NO: 50)5′-CTTTGCCGCGTGCAGGAAGGCTTCCCGACA-3′.

[0329] Mutants were screened by restriction digest with Xba I/HindIII and SphI, and verified by sequencing.

[0330] Mutagenesis of Tyrosine Phenol Lyase (β-tyrosinase) Example 2

[0331] Two point mutations were made to the tyrosine phenol lyase amino acid sequence. These mutations converted arginine (R) at position 100 to threonine (T) and valine (V) at position 283 to arginine (R) (in C. freundii mature protein sequence).

[0332] Primers for the R100T conversion were: 5′-AGGGGACCGGCGCAGAAAACCTGTTATCG-3′ (SEQ ID NO: 51) and 5′-AGGGGACCGGCGCAGAAAACCTGTTATCG-3′ (SEQ ID NO: 52). Primers for the V283R conversion were: 5′-GTTAGTCCGCGTCTACGAAGGGATGCCAT-3′ (SEQ ID NO: 53) and 5′-GTAGACGCGGACTAACTCTTTGGCAGAAG-3′ (SEQ ID NO: 54).

[0333] The methods described above were used, and the clones were screened by KpnI/SacI digestion, and BstX I digestion. The sequences were verified by dideoxy chain termination sequencing. Recombinant protein was produced as described above for the wildtype enzymes.

[0334] The reaction mixture consisted of 50 mM Tris-Cl pH 8.3, 2 mM MgCl2, 200 mM C3 carbon source, 5 mM alpha-ketoglutarate, sodium salt, 0.05 mM pyridoxal phosphate, deaerated water to achieve a final volume of 0.5 mL after the addition of the enzymes, 3 mM potassium phosphate pH 7.5, 25 μg of crude recombinant C. testosteroni ProA aldolase as prepared as in Example 4, 500 μg of crude L-aspartate aminotransferase (AspC) as prepared in Example 1, and solid tryptophan to afford a concentration of >60 mM (saturated; some undissolved throughout the reaction). The reaction mix was incubated at 30° C. for 30 minutes with mixing. Serine, alanine, and aspartate were supplied as 3-carbon sources. Assays were performed with and without secondary PLP enzymes (purified) capable of performing beta-elimination and beta-lyase reactions (tryptophanase (TNA), double mutant tryptophanase, β-tyrosinase (TPL)). The results are shown in Table 4:

22TABLE 4Production of monatin utilizing alternative C3-carbon sourcesC3-carbon sourceAdditional PLP enzymeRelative Activitynonenone 0%pyruvatenone 100%serinenone 3%serine11 μg wildtype TNA (1 U) 5.1%serine80 μg double mutant TNA 4.6%alaninenone 32%alanine11 μg wildtype TNA41.7%alanine80 μg mutant TNA43.9%aspartate110 μg wildtype TNA (10 U) 7.7%aspartate5 U wildtype TPL (crude) 5.1%aspartate80 μg mutant TNA 3.3%

[0335] The monatin produced from alanine and serine as 3-carbon sources was verified by LC/MS/MS daughter scan analysis, and was identical to the characterized monatin produced in Example 6. Alanine was the best alternative tested, and was transaminated by the AspC enzyme. The amount of monatin produced was increased by addition of the tryptophanase, which is capable of transamination as a secondary activity. The amount of monatin produced with serine as a carbon source nearly doubled with the addition of the tryptophanase enzymes, even though only one-fifth of the amount of tryptophanase was added in comparison to the aminotransferase. AspC is capable of some amount of beta-elimination activity alone. The results with aspartate indicate that the tryptophanase activity on aspartate does not increase with the same site-directed mutations as previously suggested for β-tyrosinase. It is expected that the mutant β-tyrosinase will have higher activity for production of monatin.

EXAMPLE 9

[0336] Chemical Synthesis of Monatin

[0337] The addition of alanine to indole-3-pyruvic acid produces monatin, and this reaction can be performed synthetically with a Grignard or organolithium reagent.

[0338] For example, to 3-chloro- or 3-bromo-alanine which has been appropriately blocked at the carboxyl and amino groups, is added magnesium under anhydrous conditions. Indole-3-pyruvate (appropriately blocked) is then added to form the coupled product followed by removal of the protecting groups to form monatin. Protecting groups that are particularly useful include THP (tetrahydropyranyl ether) which is easily attached and removed.

EXAMPLE 10

[0339] Detection of Monatin and MP

[0340] This example describes methods used to detect the presence of monatin, or its precursor 2-hydroxy 2-(indol-3-ylmethyl)-4-keto glutaric acid.

[0341] LC/MS Analysis

[0342] Analyses of mixtures for the alpha-keto acid form of monatin (monatin precursor, MP) and monatin derived from in vitro or in vivo biochemical reactions were performed using a Waters/Micromass liquid chromatography-tandem mass spectrometry (LC/MS/MS) instrument including a Waters 2690 liquid chromatograph with a Waters 996 Photo-Diode Array (PDA) absorbance monitor placed in series between the chromatograph and a Micromass Quattro Ultima triple quadrupole mass spectrometer. LC separations were made using a Supelco Discovery C18 reversed-phase chromatography column, 2.1 mm×150 mm, or an Xterra MS C8 reversed-phase chromatography column, 2.1 mm×250 mm, at room temperature. The LC mobile phase consisted of A) water containing 0.05% (v/v) trifluoroacetic acid and B) methanol containing 0.05% (v/v) trifluoroacetic acid.

[0343] The gradient elution was linear from 5% B to 35% B, 0-9 min, linear from 35% B to 90% B, 9-16 min, isocratic at 90% B, 16-20 min, linear from 90% B to 5% B, 20-22 min, with a 10 min re-equilibration period between runs. The flow rate was 0.25 mL/min, and PDA absorbance was monitored from 200 nm to 400 nm. All parameters of the ESI-MS were optimized and selected based on generation of protonated molecular ions ([M +H]+) of the analytes of interest, and production of characteristic fragment ions.

[0344] The following instrumental parameters were used for LC/MS analysis of monatin: Capillary: 3.5 kV; Cone: 40 V; Hex 1: 20 V; Aperture: 0 V; Hex 2: 0 V; Source temperature: 100° C.; Desolvation temperature: 350° C.; Desolvation gas: 500 L/h; Cone gas: 50 L/h; Low mass resolution (Q1): 15.0; High mass resolution (Q1): 15.0; Ion energy: 0.2; Entrance: 50V; Collision Energy: 2; Exit: 50V; Low mass resolution (Q2): 15; High mass resolution (Q2): 15; Ion energy (Q2): 3.5; Multiplier: 650. Uncertainties for reported mass/charge ratios (m/z) and molecular masses are ±0.01%. Initial detection of the alpha-keto acid form of monatin (MP) and monatin in the mixtures was accomplished by LC/MS monitoring with collection of mass spectra for the region m/z 150-400. Selected ion chromatograms for protonated molecular ions ([M+H]+=292 for MP, [M+H]+=293 for monatin) allowed direct identification of these analytes in the mixtures.

[0345] MS/MS Analysis

[0346] LC/MS/MS daughter ion experiments were performed on monatin as follows. A daughter ion analysis involves transmission of the parent ion (e.g., m/z=293 for monatin) of interest from the first mass analyzer (Q1) into the collision cell of the mass spectrometer, where argon is introduced and chemically dissociates the parent into fragment (daughter) ions. These fragment ions are then detected with the second mass analyzer (Q2), and can be used to corroborate the structural assignment of the parent.

[0347] The following instrumental parameters were used for LC/MS/MS analysis of monatin: Capillary: 3.5 kV; Cone: 40 V; Hex 1: 20 V; Aperture: 0 V; Hex 2: 0 V; Source temperature: 100° C.; Desolvation temperature: 350 ° C.; Desolvation gas: 500 L/h; Cone gas: 50 L/h; Low mass resolution (Q1): 13.0; High mass resolution (Q1): 13.0; Ion energy: 0.2; Entrance: −5 V; Collision Energy: 14; Exit: 1V; Low mass resolution (Q2): 15; High mass resolution (Q2): 15; Ion energy (Q2): 3.5; Multiplier: 650.

[0348] High-Throughput Determination of Monatin

[0349] High-throughput analyses (<5 min/sample) of mixtures for monatin derived from in vitro or in vivo reactions were carried out using instrumentation described above, and the same parameters as described for LC/MS/MS. LC separations were made using Waters Xterra MS C8 (2.1 mm×50 mm) chromatography at room temperature with isocratic elution in 15% aqueous MeOH, 0.25% acetic acid at a flow rate of 0.3 mL/min. Detection of monatin in the mixtures was accomplished using selected reaction monitoring (SRM)-tandem mass spectrometry. This involved monitoring specific collisionally-induced parent ion ([M+H]+=293.1) to daughter ion (e.g., the fragment ion at m/z=168.1, tentatively assigned as a 3-buta-1,3-dienyl-1H-indole carbonium ion) transitions to maximize sensitivity, selectivity, and throughput for the detection of monatin. PDA absorbance data were collected in parallel for further verification of monatin identity.

EXAMPLE 11

[0350] Production of Monatin in Bacteria

[0351] This example describes methods used to produce monatin in E. coli cells. One skilled in the art will understand that similar methods can be used to produce monatin in other bacterial cells. In addition, vectors containing other genes in the monatin synthesis pathway (FIG. 2) can be used.

[0352] Trp-1+ glucose medium, a minimal medium that has been used for increased production of tryptophan in E. coli cells (Zeman et al. Folia Microbiol. 35:200-4, 1990), was prepared as follows. To 700 mL nanopure water the following reagents were added: 2 g (NH4)2SO4, 13.6 g KH2PO4, 0.2 g MgSO4.7H20, 0.01 g CaCl2*2H20, and 0.5 mg FeSO4.7H20. The pH was adjusted to 7.0, the volume was increased to 850 mL, and the medium was autoclaved. A 50% glucose solution was prepared separately, and sterile-filtered. Forty mL was added to the base medium (850 mL) for a 1 L final volume.

[0353] A 10 g/L L-tryptophan solution was prepared in 0.1 M sodium phosphate pH 7, and sterile-filtered. One-tenth volume was typically added to cultures as specified below. A 10% sodium pyruvate solution was also prepared and sterile-filtered. A 10 mL aliquot was typically used per liter of culture. Stocks of ampicillin (100 mg/mL), kanamycin (25 mg/mL) and IPTG (840 mM) were prepared, sterile-filtered, and stored at −20° C. before use. Tween 20 (polyoxyethylene 20-Sorbitan monolaurate) was utilized at a 0.2% (vol/vol) final concentration. Ampicillin was used at non-lethal concentrations, typically 1-10 μg/mL final concentration.

[0354] Fresh plates of E. coli BL21(DE3)::C. testosteroni proA/pET 30 Xa/LIC (described in Example 4) were prepared on LB medium containing 50 μg/mL kanamycin. Overnight cultures (5 mL) were inoculated from a single colony and grown at 30° C. in LB medium with kanamycin. Typically a 1 to 50 inoculum was used for induction in trp-1+glucose medium. Fresh antibiotic was added to a final concentration of 50 mg/L. Shake flasks were grown at 37° C. prior to induction.

[0355] Cells were sampled every hour until an OD600 of 0.35-0.8 was obtained. Cells were then induced with 0.1 mM IPTG, and the temperature reduced to 34° C. Samples (1 ml) were collected prior to induction (zero time point) and centrifuged at 5000×g. The supernatant was frozen at −20° C. for LC/MS analysis. Four hours post-induction, another I mL sample was collected, and centrifuged to separate the broth from the cell pellet. Tryptophan, sodium pyruvate, ampicillin, and Tween were added as described above.

[0356] The cells were grown for 48 hours post-induction, and another 1 mL sample was taken and prepared as above. At 48 hours, another aliquot of tryptophan and pyruvate were added. The entire culture volume was centrifuged after approximately 70 hours of growth (post-induction), for 20 minutes at 4° C. and 3500 rpm. The supernatant was decanted and both the broth and the cells were frozen at −80° C. The broth fractions were filtered and analyzed by LC/MS. The heights and areas of the [M+H]+=293 peaks were monitored as described in Example 10. The background level of the medium was subtracted. The data was also normalized for cell growth by plotting the height of the [M+H]+=293 peak divided by the optical density of the culture at 600 nm.

[0357] Higher levels of monatin were produced when pyruvate, ampicillin, and Tween were added 4 hours post induction rather than at induction. Other additives such as PLP, additional phosphate, or additional MgCl2 did not increase the production of monatin. Higher titers of monatin were obtained when tryptophan was utilized instead of indole-3-pyruvate, and when the tryptophan was added post-induction rather than at inoculation, or at induction. Prior to induction, and 4 hours post-induction (at time of substrate addition), there was typically no detectable level of monatin in the fermentation broth or cellular extracts. Negative controls were done utilizing cells with pET30a vector only, as well as cultures where tryptophan and pyruvate were not added. A parent MS scan demonstrated that the compound with (m+1)/z=293 was not derived from larger molecules, and daughter scans (performed as in Example 10) were similar to monatin made in vitro.

[0358] The effect of Tween was studied by utilizing 0, 0.2% (vol/vol), and 0.6% final concentrations of Tween-20. The highest amount of monatin produced by shake flasks was at 0.2% Tween. The ampicillin concentration was varied between 0 and 10 μg/mL. The amount of monatin in the cellular broth increased rapidly (2.5×) between 0 and 1 μg/mL, and increased 1.3× when the ampicillin concentration was increased from 1 to 10 μg/mL.

[0359] A time course experiment showing typical results is shown in FIG. 10. The amount of monatin secreted into the cell broth increased, even when the values are normalized for cell growth. By using the molar extinction coefficient of tryptophan, the amount of monatin in the broth was estimated to be less than 10 μg/mL. The same experiment was repeated with the cells containing vector without proA insert. Many of the numbers were negative, indicating the peak height at m/z=293 was less in these cultures than in the medium alone (FIG. 10). The numbers were consistently lower when tryptophan and pyruvate were absent, demonstrating that monatin production is a result of an enzymatic reaction catalyzed by the aldolase enzyme.

[0360] The in vivo production of monatin in bacterial cells was repeated in 800 mL shake flask experiments and in fermentors. A 250 mL sample of monatin (in cell-free broth) was purified by anion exchange chromatography and preparative reverse-phase liquid chromatography. This sample was evaporated, and submitted for high resolution mass analysis (described in Example 6). The high resolution MS indicated that the metabolite being produced is monatin.

[0361] In vitro assays indicate that aminotransferase needs to be present at higher levels than aldolase (see Example 6), therefore the aspartate aminotransferase from E. coli was overexpressed in combination with the aldolase gene to increase the amount of monatin produced. Primers were designed to introduce C. testosteroni proA into an operon with aspC/pET30 Xa/LIC, as follows: 5′ primer:

[0362] ACTCGGATCCGAAGGAGATATACATATGTACGAACTGGGACT (SEQ ID NO: 67) and 3′ primer: CGGCTGTCGACCGTTAGTCAATATATTTCAGGC (SEQ ID NO: 68). The 5′ primer contains a BamHI site, the 3′ primer contains a SalI site for cloning. PCR was performed as described in Example 4, and gel purified. The aspC/pET30 Xa/LIC construct was digested with BamHI and SalI, as was the PCR product. The digests were purified using a Qiagen spin column. The proA PCR product was ligated to the vector using the Roche Rapid DNA Ligation kit (Indianapolis, Ind.) according to manufacturer's instructions. Chemical transformations were done using Novablues Singles (Novagen) as described in Example 1. Colonies were grown up in LB medium containing 50 mg/L kanamycin and plasmid DNA was purified using the Qiagen spin miniprep kit. Clones were screened by restriction digest analysis and sequence was confirmed by Seqwright (Houston, Tex.). Constructs were subcloned into BLR(DE3), BLR(DE3)pLysS, BL21(DE3) and BL21(DE3)pLysS (Novagen). The proA/pET30 Xa/LIC construct was also transformed into BL21(DE3)pLysS.

[0363] Initial comparisons of BLR(DE3) shake flask samples under the standard conditions described above demonstrated that the addition of the second gene (aspC) improved the amount of monatin produced by seven-fold. To hasten growth, BL21 (DE3)-derived host strains were used. The proA clones and the two gene operon clones were induced in Trp-1 medium as above, the pLysS hosts had chloramphenicol (34 mg/L) added to the medium as well. Shake flask experiments were performed with and without the addition of 0.2% Tween-20 and 1 mg/L ampicillin. The amount of monatin in the broth was calculated using in vitro produced purified monatin as a standard. SRM analyses were performed as described in Example 10. Cells were sampled at zero, 4 hours, 24 hours, 48 hours, 72 hours, and 96 hours of growth.

[0364] The results are shown in Table 5 for the maximum amounts produced in the culture broths. In most instances, the two gene construct gave higher values than the proA construct alone. The pLysS strains, which should have leakier cell envelopes, had higher levels of monatin secreted, even though these strains typically grow at a slower rate. The additions of Tween and ampicillin were beneficial.

23TABLE 5Amount of Monatin Produced by E. coli BacteriaConstructHostTween + Ampμg/mL monatintimeproABL21(DE3)−0.4172 hrproABL21(DE3)+1.5848 hrproABL21(DE3)pLysS−1.0448 hrproABL21(DE3)pLysS+1.6048 hraspC:proABL21(DE3)−0.0948 hraspC:proABL21(DE3)+0.5848 hraspC.proABL21(DE3)pLysS−1.3948 hraspC.proABL21(DE3)pLysS+6.6848 hr

EXAMPLE 12

[0365] Production of Monatin in Yeast

[0366] This example describes methods used to produce monatin in eukaryotic cells. One skilled in the art will understand that similar methods can be used to produce monatin in any cell of interest. In addition, other genes can be used (e.g., those listed in FIG. 2) in addition to, or alternatively to those described in this example.

[0367] The pESC Yeast Epitope Tagging Vector System (Stratagene, La Jolla, Calif.) was used to clone and express the E. coil aspC and C. testosteroni proA genes into Saccharomyces cerevisiae. The pESC vectors contain both the GAL1 and the GAL10 promoters on opposite strands, with two distinct multiple cloning sites, allowing for expression of two genes at the same time. The pESC-His vector also contains the His3 gene for complementation of histidine auxotrophy in the host (YPH500). The GAL1 and GAL10 promoters are repressed by glucose and induced by galactose; a Kozak sequence is utilized for optimal expression in yeast. The pESC plasmids are shuttle vectors, allowing the initial construct to be made in E. coli (with the bla gene for selection); however, no bacterial ribosome binding sites are present in the multiple cloning sites.

[0368] The following primers were designed for cloning into pESC-His (restriction sites are underlined, Kozak sequence is in bold): aspC (BamHI/SalI), GAL1: 5′-CGCGGATCCATAATGGTTGAGAACATTACCG-3′ (SEQ ID NO: 69) and 5′-ACGCGTCGACTTACAGCACTGCCACAATCG-3′ (SEQ ID NO: 70). proA (EcoRI/NotI), GAL10: 5′-CCGGAATTCATAATGGTCGAACTGGGAGTTGT-3′ (SEQ ID NO: 71) and 5′-GAATGCGGCCGCTTAGTCAATATATTTCAGGCC-3′ (SEQ ID NO: 72).

[0369] The second codon for both mature proteins was changed from an aromatic amino acid to valine due to the introduction of the Kozak sequence. The genes of interest were amplified using pET30 Xa/LIC miniprep DNA from the clones described in Examples 1 and Example 4 as template. PCR was performed using an Eppendorf Master cycler gradient thermocycler and the following protocol for a 50 μL reaction: 1.0 μL template, 1.0 μM of each primer, 0.4 mM each dNTP, 3.5 U Expand High Fidelity Polymerase (Roche, Indianapolis, Ind.), and 1× Expand™ buffer with Mg. The thermocycler program used consisted of a hot start at 94° C. for 5 minutes, followed by 29 repetitions of the following steps: 94° C. for 30 seconds, 50° C. for 1 minute 45 seconds, and 72° C. for 2 minutes 15 seconds. After the 29 repetitions the sample was maintained at 72° C. for 10 minutes and then stored at 4° C. The PCR products were purified by separation on a 1% TAE-agarose gel followed by recovery using a QlAquick Gel Extraction Kit (Qiagen, Valencia, Calif.).

[0370] The pESC-His vector DNA (2.7 μg) was digested with BamHI/SalI and gel-purified as above. The aspC PCR product was digested with BamHI/SalI and purified with a QIAquick PCR Purification Column. Ligations were performed with the Roche Rapid DNA Ligation Kit following the manufacturer's protocols. Desalted ligations were electroporated into 40 μl Electromax DH10B competent cells (Invitrogen) in a 0.2 cm Biorad disposable cuvette using a Biorad Gene Pulser II with pulse controller plus, according to the manufacturer's instructions. After 1 hour of recovery in 1 mL of SOC medium, the transformants were plated on LB medium containing 100 μg/mL ampicillin. Plasmid DNA preparations for clones were done using QIAprep Spin Miniprep Kits. Plasmid DNA was screened by restriction digest, and sequenced (Seqwright) for verification using primers designed for the vector.

[0371] The aspC/pESC-His clone was digested with EcoRI and NotI, as was the proA PCR product. DNA was purified as above, and ligated as above. The two gene construct was transformed into DH10B cells and screened by restriction digest and DNA sequencing.

[0372] The construct was transformed into S. cerevisiae strain YPH500 using the S.c. EasyComp™ Transformation Kit (Invitrogen). Transformation reactions were plated on SC-His minimal medium (Invitrogen pYES2 manual) containing 2% glucose. Individual yeast colonies were screened for the presence of the proA and aspC genes by colony PCR using the PCR primers above. Pelleted cells (2 μl) were suspended in 20 μL of Y-Lysis Buffer (Zymo Research) containing 1 μl of zymolase and heated at 37° C. for 10 minutes. Four μL of this suspension was then used in a 50 μL PCR reaction using the PCR reaction mixture and program described above.

[0373] Five mL cultures were grown overnight on SC-His+glucose at 30° C. and 225 rpm. The cells were gradually adjusted to growth on raffinose in order to minimize the lag period prior to induction with galactose. After approximately 12 hours of growth, absorbance measurements at 600 nm were taken, and an appropriate volume of cells was spun down and resuspended to give an OD of 0.4 in the fresh SC-His medium. The following carbon sources were used sequentially: 1% raffinose+1% glucose, 0.5% glucose+1.5% raffinose, 2% raffinose, and finally 1% raffinose+2% galactose for induction.

[0374] After approximately 16 hours of growth in induction medium, the 50 mL cultures were divided into duplicate 25 mL cultures, and the following were added to only one of the duplicates: (final concentrations) 1 g/L L-tryptophan, 5 mM sodium phosphate pH 7. 1, 1 g/L sodium pyruvate, 1 mM MgCl2. Samples of broths and cell pellets from the non-induction medium, and from the 16 hour cultures prior to addition of substrates for the monatin pathway, were saved as negative controls. In addition, constructs containing only a functional aspC gene (and a truncated proA gene) were utilized as another negative control. The cells were allowed to grow for a total of 69 hours post-induction. Occasionally the yeast cells were induced at a lower OD, and only grown for 4 hours prior to addition of tryptophan and pyruvate. However, these monatin substrates appear to inhibit growth and the addition at higher OD was more effective.

[0375] The cell pellets from the cultures were lysed with 5 mL of YeastBuster™ +50 μl THP (Novagen) per gram (wet weight) of cells following manufacturer's protocols, with the addition of protease inhibitors and benzonase nuclease as described in previous examples. The culture broth and cell extracts were filtered and analyzed by SRM as described in Example 10. Using this method, no monatin was detected in the broth samples, indicating that the cells could not secrete monatin under these conditions. The proton motive force may be insufficient under these conditions or the general amino acid transporters may be saturated with tryptophan. Protein expression was not at a level that allowed for detection of changes using SDS-PAGE.

[0376] Monatin was detectable (approximately 60 μg/mL) transiently in cell extracts of the culture with two functional genes, when tryptophan and pyruvate were added to the medium. Monatin was not detected in any of the negative control cell extracts. In vitro assays for monatin were performed in duplicate with 4.4 mg/mL of total protein (about double what is typically used for E. coli cell extracts) using the optimized assay described in Example 6. Other assays were performed with the addition of either 32 μg/mL C. testosteroni ProA aldolase or 400 μg/mL AspC aminotransferase, to determine which enzyme was limiting in the cell extract. Negative controls were performed with no addition of enzyme, or the addition of only AspC aminotransferase (the aldol condensation can occur to some extent without enzyme). Positive controls were performed with partially pure enzymes (30-40%), using 16 μg/mL aldolase and 400 μg/mL aminotransferase.

[0377] In vitro results were analyzed by SRM. The analysis of cell extracts showed that tryptophan was effectively transported into the cells when it was added to the medium post-induction, resulting in tryptophan levels two orders of magnitude higher than those in which no additional tryptophan was added. The results for in vitro monatin analysis are shown in Table 6 (numbers indicate ng/mL).

24TABLE 6Monatin production with yeast cell extracts.aspCtwo-geneconstruct+ aldolase+ AspCconstruct+ aldolase+ AspCrepressed (glucose medium)0888.3173.50465.282924 hr induced02832.8642.401375.69146.669 hr induced04937.3340.371.91652.823693.569 hr + subs.0556.9659.121.9755.616688.2+ control (purified enzymes)2185321853− control (no enzymes)0254.30254.3

[0378] Positive results were obtained with the full two-gene construct cell extracts with and without substrate added to the growth medium. These results, in comparison to the positive controls, indicate that the enzymes were expressed at levels of close to 1% of the total protein in yeast. The amount of monatin produced when the cell extract of the aspC construct (with truncated proA) was assayed with aldolase was significantly greater than when cell extracts were assayed alone, and indicates that the recombinant AspC aminotransferase comprises approximately 1-2% of the yeast total protein. The cell extracts of uninduced cultures had a small amount of activity when assayed with aldolase due to the presence of native aminotransferases in the cells. When assayed with AspC aminotransferase, the activity of the extracts from uninduced cells increased to the amount of monatin produced by the negative control with AspC (ca. 200 ng/ml). In contrast, the activity observed when assaying the two gene construct cell extract increases more when aminotransferase is supplemented than when aldolase is added. Since both genes should be expressed at the same level, this indicates that the amount of monatin produced is maximized when the level of aminotransferase is higher than that of aldolase, in agreement with results shown in Example 6.

[0379] The addition of pyruvate and tryptophan not only inhibits cellular growth, but apparently inhibits protein expression as well. The addition of the pESC-Trp plasmid can be used to correct for tryptophan auxotrophy of the YPH500 host cells, to provide a means of supplying tryptophan with fewer effects on growth, expression, and secretion.

EXAMPLE 13

[0380] Improvement of Enzymatic Processes using Coupled Reactions

[0381] In theory, if no side reactions or degradation of substrates or intermediates occurs, the maximum amount of product formed from the enzymatic reaction illustrated in FIG. 1 is directly proportional to the equilibrium constants of each reaction, and the concentrations of tryptophan and pyruvate. Tryptophan is not a highly soluble substrate, and concentrations of pyruvate greater than 200 mM appear to have a negative effect on the yield (see Example 6).

[0382] Ideally, the concentration of monatin is maximized with respect to substrates, in order to decrease the cost of separation. Physical separations can be performed such that the monatin is removed from the reaction mixture, preventing the reverse reactions from occuring. The raw materials and catalysts can then be regenerated. Due to the similarity of monatin in size, charge, and hydrophobicity to several of the reagents and intermediates, physical separations will be difficult unless there is a high amount of affinity for monatin (such as an affinity chromatography technique). However, the monatin reactions can be coupled to other reactions such that the equilibrium of the system is shifted toward monatin production. The following are examples of processes for improving the yield of monatin obtained from tryptophan or indole-3-pyruvate.

[0383] Coupled Reactions using Oxaloacetate Decarboxylase (EC 4.1.1.3)

[0384]
FIG. 11 is an illustration of the reaction. Tryptophan oxidase and catalase are utilized to drive the reaction in the direction of indole-3-pyruvate production. Catalase is used in excess such that hydrogen peroxide is not available to react in the reverse direction or to damage the enzymes or intermediates. Oxygen is regenerated during the catalase reaction. Alternatively, indole-3-pyruvate can be used as the substrate.

[0385] Aspartate is used as the amino donor for the amination of MP, and an aspartate aminotransferase is utilized. Ideally, an aminotransferase that has a low specificity for the tryptophan/indole-3-pyruvate reaction in comparison to the MP to monatin reaction is used so that the aspartate is not utilized to reaminate the indole-3-pyruvate. Oxaloacetate decarboxylase (from Pseudomonas sp.) can be added to convert the oxaloacetate to pyruvate and carbon dioxide. Since CO2 is volatile, it is not available for reaction with the enzymes, decreasing or even preventing the reverse reactions. The pyruvate produced in this step can also be utilized in the aldol condensation reaction. Other decarboxylase enzymes can be used, and homologs are known to exist in Actinobacillus actinomycetemcomitans, Aquifex aeolicus, Archaeoglobus fulgidus, Azotobacter vinelandii, Bacteroides fragilis, several Bordetella species, Campylobacter jejuni, Chlorobium tepidum, Chloroflexus aurantiacus, Enterococcus faecalis, Fusobacterium nucleatum, Klebsiella pneumoniae, Legionella pneumophila, Magnetococcus MC-1, Mannheimia haemolytica, Methylobacillus flagellatus KT, Pasteurella multocida Pm70, Petrotoga miotherma, Porphyromonas gingivalis, several Pseudomonas species, several Pyrococcus species, Rhodococcus, several Salmonella species, several Streptococcus species, Thermochromatium tepidum, Thermotoga maritima, Treponema pallidum, and several Vibrio species.

[0386] Tryptophan aminotransferase assays were performed with the aspartate aminotransferase (AspC) from E. coli, the tyrosine aminotransferase (TyrB) from E coli, the broad substrate aminotransferase (BSAT) from L. major, and the two commercially available porcine glutamate-oxaloacetate aminotransferases as described in Example 1. Both oxaloacetate and alpha-ketoglutarate were tested as the amino acceptor. The ratio of activity using monatin (Example 7) versus activity using tryptophan was compared, to determine which enzyme had the highest specificity for the monatin aminotransferase reaction. These results indicated that the enzyme with the highest specificity for the monatin reaction verses the tryptophan reaction is the Porcine type II-A glutamate-oxaloacetate aminotransferase, GOAT (Sigma G7005). This specificity was independent of which amino acceptor was utilized. Therefore, this enzyme was used in the coupled reactions with oxaloacetate decarboxylase.

[0387] A typical reaction starting from indole-3-pyruvate included (final concentrations) 50 mM Tris-Cl pH 7.3, 6 mM indole-3-pyruvate, 6 mM sodium pyruvate, 6 mM aspartate, 0.05 mM PLP, 3 mM potassium phosphate, 3 mM MgCl2, 25 μg/mL aminotransferase, 50 μg/mL C. testosteroni ProA aldolase, and 3 Units/mL of decarboxylase (Sigma O4878). The reactions were allowed to proceed for 1 hour at 26° C. In some cases, the decarboxylase was omitted or the aspartate was substituted with alpha-ketoglutarate (as negative controls). The aminotransferase enzymes described above were also tested in place of the GOAT to confirm earlier specificity experiments. Samples were filtered and analyzed by LC/MS as described in Example 10. The results demonstrate that the GOAT enzyme produced the highest amount of monatin per mg of protein, with the least amount of tryptophan produced as a by product. In addition, there was a 2-3 fold benefit from having the decarboxylase enzyme added. The E. coli AspC enzyme also produced large amounts of monatin in comparison to the other aminotransferases.

[0388] Monatin production was increased by: 1) periodically adding 2 mM additions of indole-pyruvate, pyruvate, and aspartate (every half hour to hour), 2) performing the reactions in an anaerobic environment or with degassed buffers, 3) allowing the reactions to proceed overnight, and 4) using freshly prepared decarboxylase that has not been freeze-thawed multiple times. The decarboxylase was inhibited by concentrations of pyruvate greater than 12 mM. At concentrations of indole-3-pyruvate higher than 4 mM, side reactions with indole-3-pyruvate were hastened. The amount of indole-3-pyruvate used in the reaction could be increased if the amount of aldolase was also increased. High levels of phosphate (50 mM) and aspartate (50 mM) were found to be inhibitory to the decarboxylase enzyme. The amount of decarboxylase enzyme added could be reduced to 0.5 U/mL with no decrease in monatin production in a one hour reaction. The amount of monatin produced increased when the temperature was increased from 26° C. to 30° C. and from 30° C. to 37° C.; however, at 37° C. the side reactions of indole-3-pyruvate were also hastened. The amount of monatin produced increased with increasing pH from 7 to 7.3, and was relatively stable from pH 7.3-8.3.

[0389] A typical reaction starting with tryptophan included (final concentrations) 50 mM Tris-Cl pH 7.3, 20 mM tryptophan, 6 mM aspartate, 6 mM sodium pyruvate, 0.05 mM PLP, 3 mM potassium phosphate, 3 mM MgCl2, 25 μg/mL aminotransferase, 50 μg/mL C. testosteroni ProA aldolase, 4 Units/mL of decarboxylase, 5-200 mU/mL L-amino acid oxidase (Sigma A-2805), 168 U/mL catalase (Sigma C-3515), and 0.008 mg FAD. Reactions were carried out for 30 minutes at 30° C. Improvement was observed with the addition of decarboxylase. The greatest amount of monatin was produced when 50 mU/mL of oxidase was used. Improvements were similar to those observed when indole-3-pyruvate was used as the substrate. In addition, the amount of monatin produced increased when 1) the tryptophan level was low (i.e., below the Km of the aminotransferase enzyme and therefore unable to compete with MP in the active site), and 2) the ratio of oxidase to aldolase and aminotransferase was maintained at a level such that indole-3-pyruvate could not accumulate.

[0390] Whether starting with either indole-3-pyriuvate or tryptophan, the amount of monatin produced in assays with incubation times of 1-2 hours increased when 2-4 times the amounts of all the enzymes were used while maintaining the same enzyme ratio. Using either substrate, concentrations of approximately 1 mg/mL of monatin were achieved. The amount of tryptophan produced if starting from indole-pyruvate was typically less than 20% of the amount of product, which shows the benefit of utilizing coupled reactions. With further optimization and control of the concentrations of intermediates and side reactions, the productivity and yield can be improved greatly.

[0391] Coupled Reactions using Lysine Epsilon Aminotransferase (EC 2.6.1.36)

[0392] Lysine epsilon aminotransferase (L-Lysine 6-transaminase) is found in several organisms, including Rhodococcus, Mycobacterium, Streptomyces, Nocardia, Flavobacterium, Candida utilis, and Streptomyces. It is utilized by organisms as the first step in the production of some beta-lactam antibiotics (Rius and Demain, J. Microbiol. Biotech., 7:95-100, 1997). This enzyme converts lysine to L-2-aminoadipate 6-semialdehyde (allysine), by a PLP-mediated transamination of the C-6 of lysine, utilizing alpha-ketoglutarate as the amino acceptor. Allysine is unstable and spontaneously undergoes an intramolecular dehydration to form 1-piperideine 6-carboxylate, a cyclic molecule. This effectively inhibits any reverse reaction from occuring. The reaction scheme is depicted in FIG. 12. An alternative enzyme, lysine-pyruvate 6-transaminase (EC 2.6.1.71), can also be used.

[0393] A typical reaction contained in 1 mL: 50 mM Tris-HCl pH 7.3, 20 mM indole-3-pyruvate, 0.05 mM PLP, 6 mM potassium phosphate pH 8, 2-50 mM sodium pyruvate, 1.5 mM MgCl2, 50 mM lysine, 100 μg aminotransferase (lysine epsilon aminotransferase LAT-101, BioCatalytics Pasadena, Calif.), and 200 μg C. testosteroni ProA aldolase. The amount of monatin produced increased with increasing concentrations of pyruvate. The maximum amount using these reaction conditions (at 50 mM pyruvate) was 10-fold less than what was observed with coupled reactions using oxaloacetate decarboxylase (approximately 0.1 mg/mL).

[0394] A peak with [M+H]+=293 eluted at the expected time for monatin and the mass spectrum contained several of the same fragments observed with other enzymatic processes. A second peak with the correct mass to charge ratio (293) eluted slightly earlier than what is typically observed for the S,S monatin produced in Example 6, and may indicate the presence of another isomer of monatin. Very little tryptophan was produced by this enzyme. However, there is likely some activity on pyruvate (producing alanine as a by product). Also, the enzyme is known to be unstable. Improvements can be made by performing directed evolution experiments to increase stability, reduce the activity with pyruvate, and increase the activity with MP. These reactions can also be coupled to L-amino acid oxidase/catalase as described above.

[0395] Other Coupled Reactions

[0396] Another coupling reaction that can improve monatin yield from tryptophan or indole-pyruvate is shown in FIG. 13. Formate dehydrogenase (EC 1.2.1.2 or 1.2.1.43) is a common enzyme. Some formate dehydrogenases require NADH while others can utilize NADPH. Glutamate dehydrogenase catalyzed the interconversion between the monatin precursor and monatin in previous examples, using ammonium based buffers. The presence of ammonium formate and formate dehydrogenase is an efficient system for regeneration of cofactors, and the production of carbon dioxide is an efficient way to decrease the rate of the reverse reactions (Bommarius et al., Biocatalysis 10:37, 1994 and Galkin et al. Appl. Environ. Microbiol. 63:4651-6, 1997). In addition, large amounts of ammonium formate can be dissolved in the reaction buffer. The yield of monatin produced by glutamate dehydrogenase reactions (or similar reductive aminations) can be improved by the addition of formate dehydrogenase and ammonium formate.

[0397] Other processes can be used to drive the equilibrium toward monatin production. For instance, if aminopropane is utilized as the amino acid donor in the conversion of MP to monatin with an omega-amino acid aminotransferase (EC 2.6.1.18) such as those described by in U.S. Pat. Nos. 5,360,724 and 5,300,437, one of the resulting products would be acetone, a more volatile product than the substrate, aminopropane. The temperature can be raised periodically for short periods to flash off the acetone, thereby alleviating equilibrium. Acetone has a boiling point of 47° C., a temperature not likely to degrade the intermediates if used for short periods of time. Most aminotransferases that have activity on alpha-ketoglutarate also have activity on the monatin precursor. Similarly, if a glyoxylate/aromatic acid aminotransferase (EC 2.6.1.60) is used with glycine as the amino donor, glyoxylate is produced which is relatively unstable and has a highly reduced boiling point in comparison to glycine.

EXAMPLE 14

[0398] Recombinant Expression

[0399] With publicly available enzyme cDNA and amino acid sequences, and the enzymes and sequences disclosed herein, such as SEQ ID NOS: 11 and 12, as well as variants, polymorphisms, mutants, fragments and fusions thereof, the expression and purification of any protein, such as an enzyme, by standard laboratory techniques is enabled. One skilled in the art will understand that enzymes and fragments thereof can be produced recombinantly in any cell or organism of interest, and purified prior to use, for example prior to production of SEQ ID NO: 12 and derivatives thereof.

[0400] Methods for producing recombinant proteins are well known in the art. Therefore, the scope of this disclosure includes recombinant expression of any protein or fragment thereof, such as an enzyme. For example, see U.S. Pat. No: 5,342,764 to Johnson et al.; U.S. Pat. No: 5,846,819 to Pausch et al.; U.S. Pat. No: 5,876,969 to Fleer et al. and Sambrook et al. (Molecular Cloning. A Laboratory Manual, Cold Spring Harbor, N.Y., 1989, Ch. 17).

[0401] Briefly, partial, full-length, or variant cDNA sequences, which encode for a protein or peptide, can be ligated into an expression vector, such as a bacterial or eukaryotic expression vector. Proteins and/or peptides can be produced by placing a promoter upstream of the cDNA sequence. Examples of promoters include, but are not limited to lac, trp, tac, trc, major operator and promoter regions of phage lambda, the control region of fd coat protein, the early and late promoters of SV40, promoters derived from polyoma, adenovirus, retrovirus, baculovirus and simian virus, the promoter for 3-phosphoglycerate kinase, the promoters of yeast acid phosphatase, the promoter of the yeast alpha-mating factors and combinations thereof.

[0402] Vectors suitable for the production of intact native proteins include pKC30 (Shimatake and Rosenberg, 1981, Nature 292:128), pKK177-3 (Amann and Brosius, 1985, Gene 40:183) and pET-3 (Studier and Moffatt, 1986, J. Mol. Biol. 189:113). A DNA sequence can be transferred to other cloning vehicles, such as other plasmids, bacteriophages, cosmids, animal viruses and yeast artificial chromosomes (YACs) (Burke et al., 1987, Science 236:806-12). These vectors can be introduced into a variety of hosts including somatic cells, and simple or complex organisms, such as bacteria, fungi (Timberlake and Marshall, 1989, Science 244:1313-7), invertebrates, plants (Gasser and Fraley, 1989, Science 244:1293), and mammals (Pursel et al., 1989, Science 244:1281-8), which are rendered transgenic by the introduction of the heterologous cDNA.

[0403] For expression in mammalian cells, a cDNA sequence can be ligated to heterologous promoters, such as the simian virus SV40, promoter in the pSV2 vector (Mulligan and Berg, 1981, Proc. Natl. Acad. Sci. USA 78:2072-6), and introduced into cells, such as monkey COS-1 cells (Gluzman, 1981, Cell 23:175-82), to achieve transient or long-term expression. The stable integration of the chimeric gene construct may be maintained in mammalian cells by biochemical selection, such as neomycin (Southern and Berg, 1982, J. Mol. Appl. Genet. 1:327-41) and mycophoenolic acid (Mulligan and Berg, 1981, Proc. Natl. Acad. Sci. USA 78:2072-6).

[0404] The transfer of DNA into eukaryotic, such as human or other mammalian cells, is a conventional technique. The vectors are introduced into the recipient cells as pure DNA (transfection) by, for example, precipitation with calcium phosphate (Graham and vander Eb, 1973, Virology 52:466) strontium phosphate (Brash et al., 1987, Mol. Cell Biol. 7:2013), electroporation (Neumann et al., 1982, EMBO J. 1:841), lipofection (Felgner et al., 1987, Proc. Natl. Acad. Sci USA 84:7413), DEAE dextran (McCuthan et al., 1968, J. Natl. Cancer Inst. 41:351), microinjection (Mueller et al., 1978, Cell 15:579), protoplast fusion (Schafner, 1980, Proc. Natl. Acad. Sci. USA 77:2163-7), or pellet guns (Klein et al., 1987, Nature 327:70). Alternatively, the cDNA can be introduced by infection with virus vectors, for example retroviruses (Bernstein et al., 1985, Gen. Engrg. 7:235) such as adenoviruses (Ahmad el al., 1986, J. Virol. 57:267) or Herpes (Spaete et al., 1982, Cell 30:295).

[0405] In view of the many possible embodiments to which the principles of our disclosure may be applied, it should be recognized that the illustrated embodiments are only particular examples of the disclosure and should not be taken as a limitation on the scope of the disclosure. Rather, the scope of the disclosure is in accord with the following claims. We therefore claim as our invention all that comes within the scope and spirit of these claims.

Polypeptides and biosynthetic pathways

Information

Publication Number

Date Filed

Date Published

Inventors

Original Assignees

CPC

US Classifications

International Classifications

Abstract

Description

Claims

CROSS-REFERENCE TO RELATED APPLICATION

Provisional Applications (1)