Patent Application
20150322105
Malaria remains a devastating global health problem, resulting in up to one million annual deaths (see, e.g., Sachs, Science (2002) 298:122-124; Mwangi et al., J Infect Dis (2005) 191:1932-1939; Snow et al., Nature (2005) 434:214-217; World Health Organization (WHO). World malaria report 2008). Plasmodium falciparum causes the most severe forms of malaria infection such as cerebral malaria (CM) and acute lung injury (ALI) (see, e.g., Trampuz et al., Crit Care (2003) 7:315-323). The case-fatality rate in severe malaria treated with either artemisinin or quinine derivatives remains unacceptably high. Cerebral malaria is among the deadliest syndromes with 13-21% mortality even after anti-malarial treatment (see, e.g., Idro et al., Lancet Neurol (2005) 4:827-840).
Primary therapy with quinine or artemisinin derivatives is generally effective in controlling P. falciparum parasitemia, but mortality from cerebral malaria (CM) and other forms of severe malaria remains unacceptably high. In an effort to reduce malaria-related mortality adjunctive/adjuvant therapies complementing treatment to an anti-malarial therapy have been suggested and tested (see, e.g., John et al., Expert Rev Anti Infect Ther (2010) 8:997-1008). Heme oxygenase-1 (HO-1) is a key protective gene against the development of CM in mice (see, e.g., Pamplona et al., Nat Med (2007) 13:703-710). Inhalation of carbon monoxide (CO), one of the end-products of HO-1 activity, fully prevented cerebral malaria and malaria-associated acute lung injury (M-AALI) incidence in C57BL/6 mice (see, e.g., Pamplona supra; Epiphanio et al., PLoS Pathog (2010) 6:e1000916). Research conducted in other experimental models has further shown that HO-1/CO display cytoprotective and anti-inflammatory properties that are beneficial for the resolution of acute inflammation (see, e.g., Hayashi et al., Circ Res (1999) 85:663-671; Lee et al., Nat Med (2002) 8:240-246).
Carbon monoxide holds great promise as a therapeutic agent (see, e.g., Motterlini et al., Nat Rev Drug Discov (2010) 9:728-743). However, the safety and practicability of the application of carbon monoxide gas in the clinic remains questionable due to its toxicity and the need for highly controlled medical facilities. Thus, CO-releasing molecules (CO-RMs) have been put forward as a valid alternative. Among the early-developed and still widely used CO-RMs in experimental models are the lipid-soluble CORM-2, [Ru(CO)3Cl2]2 and the water-soluble CORM-3, [Ru(CO)3Cl2(H2NCH2CO)2]. Both CORM-2 and CORM-3 do not elevate the carboxyhemoglobin (COHb) levels in blood after in vivo administration (see, e.g., Clark et al., Circ Res (2003) 93:2-8). Substantial protective effects similar to those observed for CO inhalation have been reported using CORM-2 and CORM-3 in various experimental models of disease, such as bacterial infection, vascular dysfunction, and thermal- and ischemia-reperfusion injury (see, e.g., Clark supra; Alcaraz et al., Curr Pharm Des (2008) 14:465-72); Kim et al., Annu Rev Pharmacol Toxicol (2006) 46:411-449). Moreover, CORM-2 lacks desirable drug-like properties, such as water solubility and stability in its own solvent (see Motterlini et al., Circ Res (2002) 90:e17-e24). Thus, there continues to remain a need for the development of new CORMs as therapeutic agents.
The present application provides inventive ruthenium CORM compounds, pharmaceutical compositions thereof, and methods of their use and treatment. Such compounds have been found useful in the treatment of malaria, for example, as adjuvants in combination with anti-malarial agents. Such compounds have also also been found to induce the expression of HO-1, and thus are also deemed useful in the treatment of various inflammatory conditions, such as acute lung injury and acute respiratory distress syndrome, which optionally is associated with a malaria infection.
For example, in one aspect, provided is a compound of the Formula (I):
or a salt, isomer, hydrate, or solvate thereof, or combination thereof;
wherein:
E is —S— or —Se—;
R1 is hydrogen or C1-6alkyl;
each instance of R2, R3, R4, and R5 is, independently, hydrogen, a carbohydrate group, or an oxygen protecting group; and
X1 and X2 are each independently halogen.
In certain embodiments, E is —S—. In certain embodiments, E is —Se—. In certain embodiments, R1 is hydrogen. In certain embodiments, R1 is —CH3. In certain embodiments, each instance of R2, R3, R4, and R5 is hydrogen. In certain embodiments, X1 and X2 are each —Cl.
In certain embodiments, the substituent:
is a stereoisomer selected from the group consisting of:
In certain embodiments, the compound is a stereoisomer of Formula (I-a):
or a salt, isomer, hydrate, or solvate thereof, or combination thereof.
In certain embodiments, the compound is a stereoisomer of Formula (I-b):
or a salt, isomer, hydrate, or solvate thereof, or combination thereof.
In certain embodiments, the compound is:
also referred to herein as Compound 1.
In another aspect, provided is a pharmaceutical composition comprising a compound of Formula (I), or a salt, isomer, hydrate, or solvate thereof, or combination thereof, and a pharmaceutically acceptable excipient. In certain embodiments, the compound is Compound 1.
In yet another aspect, provided is a method of treating a malaria infection comprising administering an effective amount of a compound of Formula (I), or a salt, isomer, hydrate, or solvate thereof, or combination thereof, to a subject in need thereof. In certain embodiments, the compound is Compound 1. In certain embodiments, the malaria infection is severe malaria due to a Plasmodium infection. In certain embodiments, the Plasmodium infection is a Plasmodium falciparum infection, a Plasmodium vivax infection, a Plasmodium malariae infection, a Plasmodium ovale infection, or a Plasmodium knowlesi infection. In certain embodiments, the malaria infection is cerebral malaria (CM). In certain embodiments, the malaria infection is pregnancy-associated malaria (PAM). In certain embodiments, the subject has a suspected or confirmed malaria infection. In certain embodiments, the method prevents malaria infection in the subject, e.g., in certain embodiments, the method inhibits infection of the subject by malaria parasites. In certain embodiments, the malarial infection is a recrudescent (relapsed) malarial infection.
In certain embodiments, the method further comprises administering one or more additional agents. In certain embodiments, the agent is an anti-inflammatory agent. In certain embodiments, the agent is an anti-malarial agent. In certain embodiments, the compound of Formula (I), or a salt, isomer, hydrate, or solvate thereof, is used in combination with an anti-malarial agent. In certain embodiments, the compound of Formula (I), or a salt, isomer, hydrate, or solvate thereof, is useful as an anti-malarial adjuvant, e.g., the compound of Formula (I) is an agent which potentiates the therapeutic effect of the anti-malarial agent when used in combination. In certain embodiments, the agent is an activator of pyruvate dehydrogenase. In certain embodiments, the agent is selected from the group consisting of quinazolines, protein kinase inhibitors, quinines, tetracyclines, aminoquinolones, biquanides, cinchona alkaloids, sulfonamides, artemisinins, clindamycin, dapsone, atovaquone, lumefantrine, piperaquine, pyronaridine, atovaquone, mefloquine, pyrimethamine, halofantrine, TNF inhibitors, iron chelators, dexamethasone, intravenous immunoglobulin, curdlan sulfate, dichloroacetate, and salts thereof; CO gas, and combinations thereof. In certain embodiments, the agent is artesunate. In certain embodiments, is the agent is CO gas In certain embodiments, the agent is a TNF inhibitor. In certain embodiments, the agent is an iron chelator. In certain embodiments, the agent is dichloroacetate. In certain embodiments, the agent is a protein kinase inhibitor (e.g., genistein).
In yet another aspect, provided is a method of treating acute lung injury comprising administering an effective amount of a compound of Formula (I), or a salt, isomer, hydrate, or solvate thereof, or combination thereof, to a subject in need thereof. In certain embodiments, the acute lung injury is malaria-associated acute lung injury. In certain embodiments, the compound is Compound 1.
In still yet another aspect, provided is a method of treating acute respiratory distress syndrome comprising administering an effective amount of a compound of Formula (I), or a salt, isomer, hydrate, or solvate thereof, or combination thereof, to a subject in need thereof. In certain embodiments, the acute respiratory distress syndrome is associated with a malaria infection. In certain embodiments, the compound is Compound 1.
The details of one or more embodiments of the invention are set forth herein. Other features, objects, and advantages of the invention will be apparent from the description, the figures, the examples, and the claims.
a-1c. CORM-2 protects from ECM.
a-2h. Compound 1 is a liver-targeted water-soluble CORM and protects from ECM.
a-3i. Compound 1 reduces parasite accumulation in the brain and neuroinflammation. BBB permeability (
a-4e. Compound 1 protects mice from malaria-associated ALI (M-AALI).
a-5c. Compound 1 is a potential adjunctive/adjuvant therapy for ECM.
a-6b. Compound 1 does not inhibit in vitro growth of and P. falciparum and P. berghei ANKA parasites. IC50 of Compound 1 in P. falciparum clone 3D7 (
a-7b. Compound 1 reduced Blood Brain Barrier (BBB) disruption and parenchymal brain hemorrhage in P. berghei ANKA infected mice. Cranium (
a-11e.
d: ESI-MS of lysozyme (2.0 mg/mL) when incubated with Ru(CO)3Cl2(Gal-S-Me) (Compound 1) (10 equiv) in H2O for 10 minutes at room temperature.
The present invention is based on the discovery that the addition of a thiosugar ligand to the CORM-2 complex, [Ru(CO)3Cl2]2, provides a new complex with improved drug-like properties, such as improved stability, aqueous solubility, and/or tissue specificity. An exemplary compound is the thiomethyl-beta-galactose derivative, referred to herein as Compound 1, which has demonstrated improved stability, improved aqueous solubility, and improved specificity for the liver compared to CORM-2. CO delivered from Compound 1 can induce similar protection as was seen with CO gas therapy, but without the toxic effects (elevated COHb levels) of CO inhalation. The inventors discovered that Compound 1 is an effective therapy in the protection from death caused by malaria infection, such as cerebral malaria (CM). Remarkably, the present invention demonstrates that Compound 1 is an effective adjunctive agent when used in combination with another anti-malarial agent, e.g., artesunate, after onset of the malarial infection. The inventors further discovered that Compound 1 induces the expression of HO-1, and thus the inventors envision Compound 1 as an effective therapy in the amelioration of inflammatory conditions, e.g., acute lung injury and acute respiratory distress syndrome, which optionally may be associated with malaria infection. The inventors envision that certain bioisosters of the thiosugar ligand, such as selenosugars, may optionally be found useful in the practice of one or more of the inventive methods.
Thus, in one aspect, the present invention provides inventive compounds of the Formula (I):
or salts, isomers, hydrates, or solvates thereof, or combinations thereof;
wherein:
E is —S— or —Se—;
R1 is hydrogen or C1-6alkyl;
each instance of R2, R3, R4, and R5 is, independently, hydrogen, a carbohydrate group, or an oxygen protecting group; and
X1 and X2 are each independently halogen.
The present invention also provides pharmaceutical compositions comprising a compound of Formula (I) or a salt, isomer, hydrate, or solvate thereof, or combination thereof. The present invention further provides methods of use and treatment of a compound of Formula (I), or a salt, isomer, hydrate, or solvate thereof, or combination thereof, or a pharmaceutical composition thereof.
Specific chemical terms are described below and herein. General principles of organic chemistry, as well as specific functional moieties and reactivity, are described in Organic Chemistry, Thomas Sorrell, University Science Books, Sausalito, 1999; Smith and March March's Advanced Organic Chemistry, 5th Edition, John Wiley & Sons, Inc., New York, 2001; Larock, Comprehensive Organic Transformations, VCH Publishers, Inc., New York, 1989; and Carruthers, Some Modern Methods of Organic Synthesis, 3rd Edition, Cambridge University Press, Cambridge, 1987. General principles of organometallic chemistry is described in S. W. Kirtley in Comprehensive Organometallic Chemistry I (G. Wilkinson, F. G. A. Stone, W. Abel Eds, Vol 3, 1080, Pergamon, Oxford 1982; M. J. Winter in Comprehensive Organometallic Chemistry II (W. Abel, F. G. A. Stone, G. Wilkinson Eds), Vol 5, 163, Pergamon, Oxford 1995; and M. Tamm, R. J. Baker, in Comprehensive Organometallic Chemistry III (R. H. Crabtree and D. M. P. Mingos Eds), Vol 5, 391, Elsevier, Oxford 2007.
Compounds described herein can comprise one or more asymmetric centers, and thus can exist in various isomeric forms, e.g., enantiomers and/or diastereomers. For example, the compounds described herein can be in the form of an individual enantiomer, diastereomer or geometric isomer, or can be in the form of a mixture of stereoisomers, including racemic mixtures and mixtures enriched in one or more stereoisomer. Isomers can be isolated from mixtures by methods known to those skilled in the art, including chiral high pressure liquid chromatography (HPLC) and the formation and crystallization of chiral salts; or preferred isomers can be prepared by asymmetric syntheses. See, for example, Jacques et al., Enantiomers, Racemates and Resolutions (Wiley Interscience, New York, 1981); Wilen et al., Tetrahedron 33:2725 (1977); Eliel, Stereochemistry of Carbon Compounds (McGraw-Hill, NY, 1962); and Wilen, Tables of Resolving Agents and Optical Resolutions p. 268 (E. L. Eliel, Ed., Univ. of Notre Dame Press, Notre Dame, Ind. 1972). The invention additionally encompasses compounds described herein as individual isomers substantially free of other isomers, and alternatively, as mixtures of various isomers.
When a range of values is listed, it is intended to encompass each value and sub-range within the range. For example “C1-6 alkyl” is intended to encompass, C1, C2, C3, C4, C5, C6, C1-6, C1-5, C1-4, C1-3, C1-2, C2-6, C2-5, C2-4, C2-3, C3-6, C3-5, C3-4, C4-6, C4-5, and C5-6 alkyl.
When a range of values is listed, it is intended to encompass each value and sub-range within the range. For example “C1-6 alkyl” is intended to encompass, C1, C2, C3, C4, C5, C6, C1-6, C1-5, C1-4, C1-3, C1-2, C2-6, C2-5, C2-4, C2-3, C3-6, C3-5, C3-4, C4-6, C4-5, and C5-6 alkyl.
“Alkyl” refers to a radical of a straight-chain or branched saturated hydrocarbon group having from 1 to 10 carbon atoms (“C1-10 alkyl”). In some embodiments, an alkyl group has 1 to 9 carbon atoms (“C1-9 alkyl”). In some embodiments, an alkyl group has 1 to 8 carbon atoms (“C1-8 alkyl”). In some embodiments, an alkyl group has 1 to 7 carbon atoms (“C1-7 alkyl”). In some embodiments, an alkyl group has 1 to 6 carbon atoms (“C1-6 alkyl”). In some embodiments, an alkyl group has 1 to 5 carbon atoms (“C1-5 alkyl”). In some embodiments, an alkyl group has 1 to 4 carbon atoms (“C1-4 alkyl”). In some embodiments, an alkyl group has 1 to 3 carbon atoms (“C1-3 alkyl”). In some embodiments, an alkyl group has 1 to 2 carbon atoms (“C1-2 alkyl”). In some embodiments, an alkyl group has 1 carbon atom (“C1 alkyl”). In some embodiments, an alkyl group has 2 to 6 carbon atoms (“C2-6 alkyl”). Examples of C1-6 alkyl groups include methyl (C1), ethyl (C2), n-propyl (C3), isopropyl (C3), n-butyl (C4), tert-butyl (C4), sec-butyl (C4), iso-butyl (C4), n-pentyl (C5), 3-pentanyl (C5), amyl (C5), neopentyl (C5), 3-methyl-2-butanyl (C5), tertiary amyl (C5), and n-hexyl (C6). Additional examples of alkyl groups include n-heptyl (C7), n-octyl (C8), n-nonyl (C9), n-decyl (C10), and the like.
“Carbocyclyl” refers to a radical of a non-aromatic cyclic hydrocarbon group having from 3 to 4 ring carbon atoms (“C3-4 carbocyclyl”) and zero heteroatoms in the non-aromatic ring system. Exemplary C3-4 carbocyclyl groups include, without limitation, cyclopropyl (C3), cyclopropenyl (C3), cyclobutyl (C4), and cyclobutenyl (C4). In some embodiments, “carbocyclyl” is a monocyclic, saturated carbocyclyl group having from 3 to 4 ring carbon atoms (“C3-4 cycloalkyl”).
“Alkenyl” refers to a radical of a straight-chain or branched hydrocarbon group having from 2 to 10 carbon atoms and one or more carbon-carbon double bonds (“C2-10 alkenyl”). In some embodiments, an alkenyl group has 2 to 9 carbon atoms (“C2-9 alkenyl”). In some embodiments, an alkenyl group has 2 to 8 carbon atoms (“C2-8 alkenyl”). In some embodiments, an alkenyl group has 2 to 7 carbon atoms (“C2-7 alkenyl”). In some embodiments, an alkenyl group has 2 to 6 carbon atoms (“C2-6 alkenyl”). In some embodiments, an alkenyl group has 2 to 5 carbon atoms (“C2-5 alkenyl”). In some embodiments, an alkenyl group has 2 to 4 carbon atoms (“C2-4 alkenyl”). In some embodiments, an alkenyl group has 2 to 3 carbon atoms (“C2-3 alkenyl”). In some embodiments, an alkenyl group has 2 carbon atoms (“C2 alkenyl”). The one or more carbon-carbon double bonds can be internal (such as in 2-butenyl) or terminal (such as in 1-butenyl). Examples of C2-4 alkenyl groups include ethenyl (C2), 1-propenyl (C3), 2-propenyl (C3), 1-butenyl (C4), 2-butenyl (C4), butadienyl (C4), and the like. Examples of C2-6 alkenyl groups include the aforementioned C2-4 alkenyl groups as well as pentenyl (C5), pentadienyl (C5), hexenyl (C6), and the like. Additional examples of alkenyl include heptenyl (C7), octenyl (C8), octatrienyl (C8), and the like.
“Alkynyl” refers to a radical of a straight-chain or branched hydrocarbon group having from 2 to 10 carbon atoms and one or more carbon-carbon triple bonds (“C2-10 alkynyl”). In some embodiments, an alkynyl group has 2 to 9 carbon atoms (“C2-9 alkynyl”). In some embodiments, an alkynyl group has 2 to 8 carbon atoms (“C2-8 alkynyl”). In some embodiments, an alkynyl group has 2 to 7 carbon atoms (“C2-7 alkynyl”). In some embodiments, an alkynyl group has 2 to 6 carbon atoms (“C2-6 alkynyl”). In some embodiments, an alkynyl group has 2 to 5 carbon atoms (“C2-5 alkynyl”). In some embodiments, an alkynyl group has 2 to 4 carbon atoms (“C2-4 alkynyl”). In some embodiments, an alkynyl group has 2 to 3 carbon atoms (“C2-3 alkynyl”). In some embodiments, an alkynyl group has 2 carbon atoms (“C2 alkynyl”). The one or more carbon-carbon triple bonds can be internal (such as in 2-butynyl) or terminal (such as in 1-butynyl). Examples of C2-4 alkynyl groups include, without limitation, ethynyl (C2), 1-propynyl (C3), 2-propynyl (C3), 1-butynyl (C4), 2-butynyl (C4), and the like. Examples of C2-6 alkenyl groups include the aforementioned C2-4 alkynyl groups as well as pentynyl (C5), hexynyl (C6), and the like. Additional examples of alkynyl include heptynyl (C7), octynyl (C8), and the like.
“Heterocyclyl” refers to a radical of a 5- to 10-membered non-aromatic ring system having ring carbon atoms and 1 to 4 ring heteroatoms, wherein each heteroatom is independently selected from nitrogen, oxygen, and sulfur (“5-10 membered heterocyclyl”). In heterocyclyl groups that contain one or more nitrogen atoms, the point of attachment can be a carbon or nitrogen atom, as valency permits. A heterocyclyl group can either be monocyclic or bicyclic, and can be saturated or can contain one or more carbon-carbon double or triple bonds. Heterocyclyl bicyclic ring systems can include one or more heteroatoms in one or both rings. Heterocyclyl also includes ring systems wherein the heterocyclyl ring, as defined above, is fused with one or more carbocyclyl groups wherein the point of attachment is either on the carbocyclyl or heterocyclyl ring, or ring systems wherein the heterocyclyl ring, as defined above, is fused with one or more aryl or heteroaryl groups, wherein the point of attachment is on the heterocyclyl ring, and in such instances, the number of ring members continue to designate the number of ring members in the heterocyclyl ring system.
In some embodiments, a heterocyclyl group is a 5-8 membered non-aromatic ring system having ring carbon atoms and 1-4 ring heteroatoms, wherein each heteroatom is independently selected from nitrogen, oxygen, and sulfur (“5-8 membered heterocyclyl”). In some embodiments, a heterocyclyl group is a 5-6 membered non-aromatic ring system having ring carbon atoms and 1-4 ring heteroatoms, wherein each heteroatom is independently selected from nitrogen, oxygen, and sulfur (“5-6 membered heterocyclyl”). In some embodiments, the 5-6 membered heterocyclyl has 1-3 ring heteroatoms selected from nitrogen, oxygen, and sulfur. In some embodiments, the 5-6 membered heterocyclyl has 1-2 ring heteroatoms selected from nitrogen, oxygen, and sulfur. In some embodiments, the 5-6 membered heterocyclyl has 1 ring heteroatom selected from nitrogen, oxygen, and sulfur.
Exemplary 5-membered heterocyclyl groups containing 1 heteroatom include, without limitation, tetrahydrofuranyl, dihydrofuranyl, tetrahydrothiophenyl, dihydrothiophenyl, pyrrolidinyl, dihydropyrrolyl and pyrrolyl-2,5-dione. Exemplary 5-membered heterocyclyl groups containing 2 heteroatoms include, without limitation, dioxolanyl, oxathiolanyl and dithiolanyl. Exemplary 5-membered heterocyclyl groups containing 3 heteroatoms include, without limitation, triazolinyl, oxadiazolinyl, and thiadiazolinyl. Exemplary 6-membered heterocyclyl groups containing 1 heteroatom include, without limitation, piperidinyl, tetrahydropyranyl, dihydropyridinyl, and thianyl. Exemplary 6-membered heterocyclyl groups containing 2 heteroatoms include, without limitation, piperazinyl, morpholinyl, dithianyl, dioxanyl. Exemplary 6-membered heterocyclyl groups containing 2 heteroatoms include, without limitation, triazinanyl. Exemplary 7-membered heterocyclyl groups containing 1 heteroatom include, without limitation, azepanyl, oxepanyl and thiepanyl. Exemplary 8-membered heterocyclyl groups containing 1 heteroatom include, without limitation, azocanyl, oxecanyl and thiocanyl. Exemplary bicyclic heterocyclyl groups include, without limitation, indolinyl, isoindolinyl, dihydrobenzofuranyl, dihydrobenzothienyl, tetrahydrobenzothienyl, tetrahydrobenzofuranyl, tetrahydroindolyl, tetrahydroquinolinyl, tetrahydroisoquinolinyl, decahydroquinolinyl, decahydroisoquinolinyl, octahydrochromenyl, octahydroisochromenyl, decahydronaphthyridinyl, decahydro-1,8-naphthyridinyl, octahydropyrrolo[3,2-b]pyrrole, indolinyl, phthalimidyl, naphthalimidyl, chromanyl, chromenyl, and the like.
“Aryl” refers to a radical of a monocyclic or bicyclic 4n+2 aromatic ring system (e.g., having 6 or 10 π electrons shared in a cyclic array) having 6-10 ring carbon atoms and zero heteroatoms provided in the aromatic ring system (“C6-10 aryl”). In some embodiments, an aryl group has 6 ring carbon atoms (“C6 aryl”; e.g., phenyl). In some embodiments, an aryl group has 10 ring carbon atoms (“C10 aryl”; e.g., naphthyl such as 1-naphthyl and 2-naphthyl). Aryl also includes ring systems wherein the aryl ring, as defined above, is fused with one or more carbocyclyl or heterocyclyl groups wherein the radical or point of attachment is on the aryl ring, and in such instances, the number of carbon atoms continue to designate the number of carbon atoms in the aryl ring system.
“Heteroaryl” refers to a radical of a 5-10 membered monocyclic or bicyclic 4n+2 aromatic ring system (e.g., having 6 or 10 π electrons shared in a cyclic array) having ring carbon atoms and 1-4 ring heteroatoms provided in the aromatic ring system, wherein each heteroatom is independently selected from nitrogen, oxygen and sulfur (“5-10 membered heteroaryl”). In heteroaryl groups that contain one or more nitrogen atoms, the point of attachment can be a carbon or nitrogen atom, as valency permits. Heteroaryl bicyclic ring systems can include one or more heteroatoms in one or both rings. Heteroaryl includes ring systems wherein the heteroaryl ring, as defined above, is fused with one or more carbocyclyl or heterocyclyl groups wherein the point of attachment is on the heteroaryl ring, and in such instances, the number of ring members continue to designate the number of ring members in the heteroaryl ring system. Heteroaryl also includes ring systems wherein the heteroaryl ring, as defined above, is fused with one or more aryl groups wherein the point of attachment is either on the aryl or heteroaryl ring, and in such instances, the number of ring members designates the number of ring members in the fused polycyclic (aryl/heteroaryl) ring system. Bicyclic heteroaryl groups wherein one ring does not contain a heteroatom (e.g., indolyl, quinolinyl, carbazolyl, and the like) the point of attachment can be on either ring, i.e., either the ring bearing a heteroatom (e.g., 2-indolyl) or the ring that does not contain a heteroatom (e.g., 5-indolyl).
In some embodiments, a heteroaryl group is a 5-8 membered aromatic ring system having ring carbon atoms and 1-4 ring heteroatoms provided in the aromatic ring system, wherein each heteroatom is independently selected from nitrogen, oxygen, and sulfur (“5-8 membered heteroaryl”). In some embodiments, a heteroaryl group is a 5-6 membered aromatic ring system having ring carbon atoms and 1-4 ring heteroatoms provided in the aromatic ring system, wherein each heteroatom is independently selected from nitrogen, oxygen, and sulfur (“5-6 membered heteroaryl”). In some embodiments, the 5-6 membered heteroaryl has 1-3 ring heteroatoms selected from nitrogen, oxygen, and sulfur. In some embodiments, the 5-6 membered heteroaryl has 1-2 ring heteroatoms selected from nitrogen, oxygen, and sulfur. In some embodiments, the 5-6 membered heteroaryl has 1 ring heteroatom selected from nitrogen, oxygen, and sulfur.
Exemplary 5-membered heteroaryl groups containing 1 heteroatom include, without limitation, pyrrolyl, furanyl and thiophenyl. Exemplary 5-membered heteroaryl groups containing 2 heteroatoms include, without limitation, imidazolyl, pyrazolyl, oxazolyl, isoxazolyl, thiazolyl, and isothiazolyl. Exemplary 5-membered heteroaryl groups containing 3 heteroatoms include, without limitation, triazolyl, oxadiazolyl, and thiadiazolyl. Exemplary 5-membered heteroaryl groups containing 4 heteroatoms include, without limitation, tetrazolyl. Exemplary 6-membered heteroaryl groups containing 1 heteroatom include, without limitation, pyridinyl. Exemplary 6-membered heteroaryl groups containing 2 heteroatoms include, without limitation, pyridazinyl, pyrimidinyl, and pyrazinyl. Exemplary 6-membered heteroaryl groups containing 3 or 4 heteroatoms include, without limitation, triazinyl and tetrazinyl, respectively. Exemplary 7-membered heteroaryl groups containing 1 heteroatom include, without limitation, azepinyl, oxepinyl, and thiepinyl. Exemplary 5,6-bicyclic heteroaryl groups include, without limitation, indolyl, isoindolyl, indazolyl, benzotriazolyl, benzothiophenyl, isobenzothiophenyl, benzofuranyl, benzoisofuranyl, benzimidazolyl, benzoxazolyl, benzisoxazolyl, benzoxadiazolyl, benzthiazolyl, benzisothiazolyl, benzthiadiazolyl, indolizinyl, and purinyl. Exemplary 6,6-bicyclic heteroaryl groups include, without limitation, naphthyridinyl, pteridinyl, quinolinyl, isoquinolinyl, cinnolinyl, quinoxalinyl, phthalazinyl, and quinazolinyl.
“Partially unsaturated” refers to a group that includes at least one double or triple bond. The term “partially unsaturated” is intended to encompass rings having multiple sites of unsaturation, but is not intended to include aromatic groups (e.g., aryl or heteroaryl moieties) as herein defined. Likewise, “saturated” refers to a group that does not contain a double or triple bond, i.e., contains all single bonds.
Alkyl, alkenyl, alkynyl, carbocyclyl, heterocyclyl, aryl, and heteroaryl groups, as defined herein, are optionally substituted (e.g., “substituted” or “unsubstituted” alkyl, “substituted” or “unsubstituted” alkenyl, “substituted” or “unsubstituted” alkynyl, “substituted” or “unsubstituted” carbocyclyl, “substituted” or “unsubstituted” heterocyclyl, “substituted” or “unsubstituted” aryl, or “substituted” or “unsubstituted” heteroaryl group). In general, the term “substituted”, whether preceded by the term “optionally” or not, means that at least one hydrogen present on a group (e.g., a carbon or nitrogen atom) is replaced with a permissible substituent, e.g., a substituent which upon substitution results in a stable compound, e.g., a compound which does not spontaneously undergo transformation such as by rearrangement, cyclization, elimination, or other reaction. Unless otherwise indicated, a “substituted” group has a substituent at one or more substitutable positions of the group, and when more than one position in any given structure is substituted, the substituent is either the same or different at each position. The term “substituted” is contemplated to include substitution with all permissible substituents of organic compounds, any of the substituents described herein that results in the formation of a stable compound. The present invention contemplates any and all such combinations in order to arrive at a stable compound. For purposes of this invention, heteroatoms such as nitrogen may have hydrogen substituents and/or any suitable substituent as described herein which satisfy the valencies of the heteroatoms and results in the formation of a stable moiety.
Exemplary carbon atom substituents include, but are not limited to, halogen, —CN, —NO2, —N3, —SO2H, —SO3H, —OH, —ORaa, —ON(Rbb)2, —N(Rbb)2, —N(Rbb)3+X−, —N(ORcc)Rbb, —SH, —SRaa, —SSRcc, —C(═O)Raa, —CO2H, —CHO, —C(ORcc)2, —CO2Raa, —OC(═O)Raa, —OCO2Raaa, —C(═O)N(Rbb)2, —OC(═O)N(Rbb)2, —NRbbC(═O)Raa, —NRbbCO2Raa, —NRbbC(═O)N(Rbb)2, —C(═NRbb)Raa, —C(═NRbb)ORaa, —OC(═NRbb)Raa, —OC(═NRbb)ORaa, —C(═NRbb)N(Rbb)2, —OC(═NRbb)N(Rbb)2, —NRbbC(═NRbb)N(Rbb)2, —C(═O)NRbbSO2Raa, —NRbbSO2Raa, —SO2N(Rbb)2, —SO2Raa, —SO2ORaa, —OSO2Raa, —S(═O)Raa, —OS(═O)Raa, —Si(Raa)3, —OSi(Raa)3—C(═S)N(Rbb)2, —C(═O)SRaa, —C(═S)SRaa, —SC(═S)SRaa, —SC(═O)SRaa, —OC(═O)SRaa, —SC(═O)ORaa, —SC(═O)Raa, —P(═O)2Raa, —OP(═O)2Raa, —P(═O)(Raa)2, —OP(═O)(Raa)2, —OP(═O)(ORcc)2, —P(═O)2N(Rbb)2, —OP(═O)2N(Rbb)2, —P(═O)(NRbb)2, —OP(═O)(NRbb)2, —NRbbP(═0)(ORcc)2, —NRbbP(═O)(NRbb)2, —P(Rcc)2, —P(Rcc)3, —OP(RCC)2, —OP(Rcc)3, —B(Raa)2, —B(ORcc)2, —BRaa(ORcc), C1-10 alkyl, C1-10 l, C2-10 alkenyl, C2-10 alkynyl, C3-10 carbocyclyl, 3-14 membered heterocyclyl, C6-14 aryl, and 5-14 membered heteroaryl, wherein each alkyl, alkenyl, alkynyl, carbocyclyl, heterocyclyl, aryl, and heteroaryl is independently substituted with 0, 1, 2, 3, 4, or 5 Rdd groups;
or two geminal hydrogens on a carbon atom are replaced with the group ═O, ═S, ═NN(Rbb)2, ═NNRbbC(═O)Raa, ═NNRbbC(═O)ORaa, ═NNRbbS(═O)2Raa, ═NRbb, or ═NORcc;
each instance of Raa is, independently, selected from C1-10 alkyl, C1-10 perhaloalkyl, C2-10 alkenyl, C2-10 alkynyl, C3-10 carbocyclyl, 3-14 membered heterocyclyl, C6-14 aryl, and 5-14 membered heteroaryl, or two Raa groups are joined to form a 3-14 membered heterocyclyl or 5-14 membered heteroaryl ring, wherein each alkyl, alkenyl, alkynyl, carbocyclyl, heterocyclyl, aryl, and heteroaryl is independently substituted with 0, 1, 2, 3, 4, or 5 Rdd groups;
each instance of Rbb is, independently, selected from hydrogen, —OH, —ORaa, —N(Rcc)2, —CN, —C(═O)Raa, —C(═O)N(Rcc)2, —CO2Raa, —SO2Raa, —C(═NRcc)ORaa, —C(═NRcc)N(Rcc)2, —SO2N(Rcc)2, —SO2Rcc, —SO2ORcc, —SORaa, —C(═S)N(Rcc)2, —C(═O)SRcc, —C(═S)SRcc, —P(═O)2Raa, —P(═O)(Raa)2, —P(═O)2N(Rcc)2, —P(═O)(NRcc)2, C1-10 alkyl, C1-10 perhaloalkyl, C2-10 alkenyl, C2-10 alkynyl, C3-10 carbocyclyl, 3-14 membered heterocyclyl, C6-14 aryl, and 5-14 membered heteroaryl, or two Rbb groups are joined to form a 3-14 membered heterocyclyl or 5-14 membered heteroaryl ring, wherein each alkyl, alkenyl, alkynyl, carbocyclyl, heterocyclyl, aryl, and heteroaryl is independently substituted with 0, 1, 2, 3, 4, or 5 Rdd groups;
each instance of Rcc is, independently, selected from hydrogen, C1-10 alkyl, C1-10 perhaloalkyl, C2-10 alkenyl, C2-10 alkynyl, C3-10 carbocyclyl, 3-14 membered heterocyclyl, C6-14 aryl, and 5-14 membered heteroaryl, or two RC groups are joined to form a 3-14 membered heterocyclyl or 5-14 membered heteroaryl ring, wherein each alkyl, alkenyl, alkynyl, carbocyclyl, heterocyclyl, aryl, and heteroaryl is independently substituted with 0, 1, 2, 3, 4, or 5 Rdd groups;
each instance of Rdd is, independently, selected from halogen, —CN, —NO2, —N3, —SO2H, —SO3H, —OH, —ORee, —ON(Rff)2, —N(Rff)2, —N(Rff)3+X−, —N(ORee)Rff, —SH, —SRee, —SSRee, —C(═O)Ree, —CO2H, —CO2Ree, —OC(═O)Ree, —OCO2Ree, —C(═O)N(Rff)2, —OC(═O)N(Rff)2, —NRffC(═O)Ree, —NRffCO2Ree, —NRffC(═O)N(Rff)2, —C(═NRff)ORee, —OC(═NRff)Ree, —OC(═NRff)ORee, —C(═NRff)N(Rff)2, —OC(═NRff)N(Rff)2, —NRffC(═NRff)N(Rff)2, —NRffSO2Ree, —SO2N(Ree)2, —SO2Ree, —SO2ORee, —OSO2Ree, —S(═O)Ree, —Si(Ree)3, —OSi(Ree)3, —C(═S)N(Rff)2, —C(═O)SRee, —C(═S)SRee, —SC(═S)SRee, —P(═O)2Ree, P(═O)(Ree)2, —OP(═O)(Ree)2, —OP(═O)(ORee)2, C1-6 alkyl, C1-6 perhaloalkyl, C2-6 alkenyl, C2-6 alkynyl, C3-10 carbocyclyl, 3-10 membered heterocyclyl, C6-10 aryl, 5-10 membered heteroaryl, wherein each alkyl, alkenyl, alkynyl, carbocyclyl, heterocyclyl, aryl, and heteroaryl is independently substituted with 0, 1, 2, 3, 4, or 5 Rgg groups, or two geminal Rdd substituents can be joined to form ═O or ═S;
each instance of Ree is, independently, selected from C1-6 alkyl, C1-6 perhaloalkyl, C2-6 alkenyl, C2-6 alkynyl, C3-10 carbocyclyl, C6-10 aryl, 3-10 membered heterocyclyl, and 3-10 membered heteroaryl, wherein each alkyl, alkenyl, alkynyl, carbocyclyl, heterocyclyl, aryl, and heteroaryl is independently substituted with 0, 1, 2, 3, 4, or 5 Rgg groups; each instance of Rff is, independently, selected from hydrogen, C1-6 alkyl, C1-6 perhaloalkyl, C2-6 alkenyl, C2-6 alkynyl, C3-10 carbocyclyl, 3-10 membered heterocyclyl, C6-10 aryl and 5-10 membered heteroaryl, or two Rff groups are joined to form a 3-14 membered heterocyclyl or 5-14 membered heteroaryl ring, wherein each alkyl, alkenyl, alkynyl, carbocyclyl, heterocyclyl, aryl, and heteroaryl is independently substituted with 0, 1, 2, 3, 4, or 5 Rgg groups; and each instance of Rgg is, independently, halogen, —CN, —NO2, —N3, —SO2H, —SO3H, —OH, —OC1-6 alkyl, —ON(C1-6 alkyl)2, —N(C1-6 alkyl)2, —N(C1-6 alkyl)3+X−, —NH(C1-6 alkyl)2+X−, —NH2(C1-6 alkyl)3+X−, —NH3+X−, —N(OC1-6 alkyl)(C1-6 alkyl), —N(OH)(C1-6 alkyl), —NH(OH), —SH, —SC1-6 alkyl, —SS(C1-6 alkyl), —C(═O)(C1-6 alkyl), —CO2H, —CO2(C1-6 alkyl), —OC(═O)(C1-6 alkyl), —OCO2(C1-6 alkyl), —C(═O)NH2, —C(═O)N(C1-6 alkyl)2, —OC(═O)NH(C1-6 alkyl), —NHC(═O)(C1-6 alkyl), —N(C1-6 alkyl)C(═O)(C1-6 alkyl), —NHCO2(C1-6 alkyl), —NHC(═O)N(C1-6 alkyl)2, —NHC(═O)NH(C1-6 alkyl), —NHC(═O)NH2, —C(═NH)O(C1-6 alkyl), —OC(═NH)(C1-6 alkyl), —OC(═NH)OC1-6 alkyl, —C(═NH)N(C1-6 alkyl)2, —C(═NH)NH(C1-6 alkyl), —C(═NH)NH2, —OC(═NH)N(C1-6 alkyl)2, —OC(NH)NH(C1-6 alkyl), —OC(NH)NH2, —NHC(NH)N(C1-6 alkyl)2, —NHC(═NH)NH2, —NHSO2(C1-6 alkyl), —SO2N(C1-6 alkyl)2, —SO2NH(C1-6 alkyl), —SO2NH2, —SO2C1-6 alkyl, —SO2OC1-6 alkyl, —OSO2C1-6 alkyl, —SOC1-6 alkyl, —Si(C1-6 alkyl)3, —OSi(C1-6 alkyl)3—C(═S)N(C1-6 alkyl)2, C(═S)NH(C1-6 alkyl), C(═S)NH2, —C(═O)S(C1-6 alkyl), —C(═S)SC1-6 alkyl, —SC(═S)SC1-6 alkyl, —P(═O)2(C1-6 alkyl), —P(═O)(C1-6 alkyl)2, —OP(═O)(C1-6 alkyl)2, —OP(═O)(OC1-6 alkyl)2, C1-6 alkyl, C1-6 perhaloalkyl, C2-6 alkenyl, C2-6 alkynyl, C3-10 carbocyclyl, C6-10 aryl, 3-10 membered heterocyclyl, 5-10 membered heteroaryl; or two geminal Rgg substituents can be joined to form ═O or ═S; wherein X− is a counterion.
A “counterion” or “anionic counterion” is a negatively charged group associated with a cationic quaternary amino group in order to maintain electronic neutrality. Exemplary counterions include halide ions (e.g., F−, Cl−, Br−, I−), NO3−, ClO4−, OH−, H2PO4−, HSO4−, sulfonate ions (e.g., methansulfonate, trifluoromethanesulfonate, p-toluenesulfonate, benzenesulfonate, 10-camphor sulfonate, naphthalene-2-sulfonate, naphthalene-1-sulfonic acid-5-sulfonate, ethan-1-sulfonic acid-2-sulfonate, and the like), and carboxylate ions (e.g., acetate, ethanoate, propanoate, benzoate, glycerate, lactate, tartrate, glycolate, and the like).
“Halo” or “halogen” refers to fluorine (fluoro, —F), chlorine (chloro, —C1), bromine (bromo, —Br), or iodine (iodo, —I).
Exemplary nitrogen atom substituents include, but are not limited to, —OH, —ORaa, —N(Rcc)2, —C(═O)Raa, —C(═O)N(Rcc)2, —CO2Raa, —SO2Raa, —C(═NRcc)Raa, —C(═NRcc)ORaa, —C(═NRcc)N(Rcc)2, —SO2N(Rcc)2, —SO2Rcc, —SO2ORcc, —SORaa, —C(═S)N(Rcc)2, —C(═O)SRcc, —C(═S)SRcc, C1-10 alkyl (e.g., aralkyl, heteroaralkyl), C2-10 alkenyl, C2-10 alkynyl, C3-10 carbocyclyl, 3-14 membered heterocyclyl, C6-14 aryl, and 5-14 membered heteroaryl groups, wherein each alkyl, alkenyl, alkynyl, carbocyclyl, heterocyclyl, aralkyl, aryl, and heteroaryl is independently substituted with 0, 1, 2, 3, 4, or 5 Rdd groups, and wherein Raa, Rbb, Rcc and Rdd are as defined herein. In certain embodiments, the nitrogen atom substituent is a nitrogen protecting group. Nitrogen protecting groups are well known in the art and include those described in detail in Protecting Groups in Organic Synthesis, T. W. Greene and P. G. M. Wuts, 3rd edition, John Wiley & Sons, 1999, incorporated herein by reference.
Exemplary oxygen atom substituents include, but are not limited to, —Raa, —C(═O)SRaa, —C(═O)Raa, —CO2Raa, —C(═O)N(Rbb)2, —C(═NRbb)Raa, —C(═NRbb)ORaa, —C(═NRbb)N(Rbb)2, —S(═O)Raa, —SO2Raa, —Si(Raa)3, —P(Rcc)2, —P(Rcc)3, —P(═O)2Raa, —P(═O)(Raa)2, —P(═O)(ORcc)2, —P(═O)2N(Rbb)2, and —P(═O)(NRbb)2, wherein Raa, Rbb, and Rcc are as defined herein. In certain embodiments, the oxygen atom substituent present on an oxygen atom is an oxygen protecting group (also referred to as a hydroxyl protecting group). Oxygen protecting groups are well known in the art and include those described in detail in Protecting Groups in Organic Synthesis, T. W. Greene and P. G. M. Wuts, 3rd edition, John Wiley & Sons, 1999, incorporated herein by reference.
Exemplary oxygen protecting groups include, but are not limited to, methyl, methoxylmethyl (MOM), methylthiomethyl (MTM), t-butylthiomethyl, (phenyldimethylsilyl)methoxymethyl (SMOM), benzyloxymethyl (BOM), p-methoxybenzyloxymethyl (PMBM), (4-methoxyphenoxy)methyl (p-AOM), guaiacolmethyl (GUM), t-butoxymethyl, 4-pentenyloxymethyl (POM), siloxymethyl, 2-methoxyethoxymethyl (MEM), 2,2,2-trichloroethoxymethyl, bis(2-chloroethoxy)methyl, 2-(trimethylsilyl)ethoxymethyl (SEMOR), tetrahydropyranyl (THP), 3-bromotetrahydropyranyl, tetrahydrothiopyranyl, 1-methoxycyclohexyl, 4-methoxytetrahydropyranyl (MTHP), 4-methoxytetrahydrothiopyranyl, 4-methoxytetrahydrothiopyranyl S,S-dioxide, 1-[(2-chloro-4-methyl)phenyl]-4-methoxypiperidin-4-yl (CTMP), 1,4-dioxan-2-yl, tetrahydrofuranyl, tetrahydrothiofuranyl, 2,3,3a,4,5,6,7,7a-octahydro-7,8,8-trimethyl-4,7-methanobenzofuran-2-yl, 1-ethoxyethyl, 1-(2-chloroethoxyl)ethyl, 1-methyl-1-methoxyethyl, 1-methyl-1-benzyloxyethyl, 1-methyl-1-benzyloxy-2-fluoroethyl, 2,2,2-trichloroethyl, 2-trimethylsilylethyl, 2-(phenylselenyl)ethyl, t-butyl, allyl, p-chlorophenyl, p-methoxyphenyl, 2,4-dinitrophenyl, benzyl (Bn), p-methoxybenzyl, 3,4-dimethoxybenzyl, o-nitrobenzyl, p-nitrobenzyl, p-halobenzyl, 2,6-dichlorobenzyl, p-cyanobenzyl, p-phenylbenzyl, 2-picolyl, 4-picolyl, 3-methyl-2-picolyl N-oxido, diphenylmethyl, p,p-dinitrobenzhydryl, 5-dibenzosuberyl, triphenylmethyl, α-naphthyldiphenylmethyl, p-methoxyphenyldiphenylmethyl, di(p-methoxyphenyl)phenylmethyl, tri(p-methoxyphenyl)methyl, 4-(4′-bromophenacyloxyphenyl)diphenylmethyl, 4,4′,4″-tris(4,5-dichlorophthalimidophenyl)methyl, 4,4′,4″-tris(levulinoyloxyphenyl)methyl, 4,4′,4″-tris(benzoyloxyphenyl)methyl, 3-(imidazol-1-yl)bis(4′,4″-dimethoxyphenyl)methyl, 1,1-bis(4-methoxyphenyl)-1′-pyrenylmethyl, 9-anthryl, 9-(9-phenyl)xanthenyl, 9-(9-phenyl-10-oxo)anthryl, 1,3-benzodisulfuran-2-yl, benzisothiazolyl S,S-dioxido, trimethylsilyl (TMS), triethylsilyl (TES), triisopropylsilyl (TIPS), dimethylisopropylsilyl (IPDMS), diethylisopropylsilyl (DEIPS), dimethylthexylsilyl, t-butyldimethylsilyl (TBDMS), t-butyldiphenylsilyl (TBDPS), tribenzylsilyl, tri-p-xylylsilyl, triphenylsilyl, diphenylmethylsilyl (DPMS), t-butylmethoxyphenylsilyl (TBMPS), formate, benzoylformate, acetate (—Ac), chloroacetate, dichloroacetate, trichloroacetate, trifluoroacetate, methoxyacetate, triphenylmethoxyacetate, phenoxyacetate, p-chlorophenoxyacetate, 3-phenylpropionate, 4-oxopentanoate (levulinate), 4,4—(ethylenedithio)pentanoate (levulinoyldithioacetal), pivaloate, adamantoate, crotonate, 4-methoxycrotonate, benzoate, p-phenylbenzoate, 2,4,6-trimethylbenzoate (mesitoate), alkyl methyl carbonate, 9-fluorenylmethyl carbonate (Fmoc), alkyl ethyl carbonate, alkyl 2,2,2-trichloroethyl carbonate (Troc), 2-(trimethylsilyl)ethyl carbonate (TMSEC), 2-(phenylsulfonyl) ethyl carbonate (Psec), 2-(triphenylphosphonio) ethyl carbonate (Peoc), alkyl isobutyl carbonate, alkyl vinyl carbonate alkyl allyl carbonate, alkyl p-nitrophenyl carbonate, alkyl benzyl carbonate, alkyl p-methoxybenzyl carbonate, alkyl 3,4-dimethoxybenzyl carbonate, alkyl o-nitrobenzyl carbonate, alkyl p-nitrobenzyl carbonate, alkyl S-benzyl thiocarbonate, 4-ethoxy-1-napththyl carbonate, methyl dithiocarbonate, 2-iodobenzoate, 4-azidobutyrate, 4-nitro-4-methylpentanoate, o-(dibromomethyl)benzoate, 2-formylbenzenesulfonate, 2-(methylthiomethoxy)ethyl, 4-(methylthiomethoxy)butyrate, 2-(methylthiomethoxymethyl)benzoate, 2,6-dichloro-4-methylphenoxyacetate, 2,6-dichloro-4-(1,1,3,3-tetramethylbutyl)phenoxyacetate, 2,4-bis(1,1-dimethylpropyl)phenoxyacetate, chlorodiphenylacetate, isobutyrate, monosuccinoate, (E)-2-methyl-2-butenoate, o-(methoxyacyl)benzoate, α-naphthoate, nitrate, alkyl N,N,N′,N-tetramethylphosphorodiamidate, alkyl N-phenylcarbamate, borate, dimethylphosphinothioyl, alkyl 2,4-dinitrophenylsulfenate, sulfate, methanesulfonate (mesylate), benzylsulfonate, and tosylate (Ts). In certain embodiments, two proximal oxygens atoms are protected as a cyclic acetal, e.g., 1,2- or 1,3-diols may be protected as a isopropylidinyl, a cycloalkylidene ketal (e.g., cyclopentylidene or cyclohexylidene), a benzylidene acetal (e.g., p-methoxybenzylidine), a carbonate, a silylene (e.g., di-t-butylsilylene, 1,3-(1,1,1,3,3)-tetraisopropyldisiloxanylide), a 1,3-dioxolanyl, or a 1,3-dioxanyl group.
“Salt” or “pharmaceutically acceptable salt” refers to those salts which are, within the scope of sound medical judgment, suitable for use in contact with the tissues of humans and lower animals without undue toxicity, irritation, allergic response and the like, and are commensurate with a reasonable benefit/risk ratio. Pharmaceutically acceptable salts are well known in the art. For example, see Berge et al., describes pharmaceutically acceptable salts in detail in J. Pharmaceutical Sciences (1977) 66:1-19, and P. Heinrich Stahl and Camille G. Wermuth, Handbook of Pharmaceutical Salts: Properties, Selection and Use. International Union of Pure and Applied Chemistry, Wiley-VCH 2002. Pharmaceutically acceptable salts include pharmaceutically acceptable acid addition salts (i.e., a salt formed from the compound upon addition of an acid) and pharmaceutically acceptable base addition salts (i.e., a salt formed from the compound upon addition of a base). Pharmaceutically acceptable acid addition salts include, but are not limited to, hydrochloride, hydrobromide, hydroiodide, nitrate, sulfate, bisulfate, phosphate, acid phosphate, isonicotinate, acetate, lactate, salicylate, citrate, tartrate, pantothenate, bitartrate, ascorbate, succinate, maleate, gentisinate, fumarate, gluconate, glucaronate, saccharate, formate, benzoate, glutamate, methanesulfonate, ethanesulfonate, benzensulfonate, p-toluenesulfonate and pamoate salts. Pharmaceutically acceptable base addition salts include, but are not limited to, aluminum, calcium, lithium, magnesium, potassium, sodium, zinc, and quaternary amine salts.
An “isomer” includes any and all geometric isomers and stereoisomers. For example, “isomers” include cis- and trans-isomers, E- and Z— isomers, R- and S-enantiomers, diastereomers, (D)-isomers, (L)-isomers, fac and mer isomers, racemic mixtures thereof, and other mixtures thereof, as falling within the scope of the invention.
A “hydrate” refers to a compound of the present disclosure non-covalently associated with one or more molecules of water. Likewise, a “solvate” refers to a compound of the present disclosure non-covalently associated with one or more molecules of an organic solvent.
A “carbohydrate group” or a “carbohydrate” refers to a monosaccharide or a polysaccharide (e.g., a disaccharide or oligosaccharide). Exemplary monosaccharides include, but are not limited to, allose, altrose, glucose, mannose, gulose, idose, galactose, talose, ribose, arabinose, xylose, and lyxose. Disaccharides are two joined monosaccharides.
Exemplary disaccharides include, but are not limited to, sucrose, maltose, cellobiose, and lactose. Typically, an oligosaccharide includes between three and ten monosaccharide units (e.g., raffinose, stachyose). The carbohydrate group may be a natural sugar or a modified sugar. Exemplary modified sugars include, but are not limited to, 2′-deoxyribose wherein a hydroxyl group is removed, 2′-fluororibose wherein a hydroxyl group is replace with a fluorine, or N-acetylglucosamine, or a nitrogen-containing form of glucose (e.g., 2′-fluororibose, deoxyribose, and hexose). Carbohydrates may exist in many different forms, for example, conformers, cyclic forms, acyclic forms, stereoisomers, tautomers, anomers, and isomers.
As generally described above, the present invention provides compounds of Formula (I):
or salts, isomers, hydrates, or solvates thereof, or combinations thereof;
wherein:
E is —S— or —Se—;
R1 is hydrogen or Cl6alkyl;
each instance of R2, R3, R4, and R5 is, independently, hydrogen, a carbohydrate group, or an oxygen protecting group; and
X1 and X2 are each independently halogen.
In certain embodiments, E is —S—. In certain embodiments, E is —Se—.
In certain embodiments, R1 is C1-3alkyl. In certain embodiments, R1 is C1-4alkyl. In certain embodiments, R1 is C1-3alkyl. In certain embodiments, R1 is C1-2alkyl. In certain embodiments, R1 is C2-6alkyl. In certain embodiments, R1 is C2-5alkyl. In certain embodiments, R1 is C2-4alkyl. In certain embodiments, R1 is C2-3alkyl. In certain embodiments, R1 is C3-6alkyl. In certain embodiments, R1 is C3-5alkyl. In certain embodiments, R1 is C3-4alkyl. In certain embodiments, R1 is C4-6alkyl. In certain embodiments, R1 is C4-5alkyl. In certain embodiments, R1 is C1alkyl. In certain embodiments, R1 is C2alkyl. In certain embodiments, R1 is C3alkyl. In certain embodiments, R1 is C4alkyl. In certain embodiments, R1 is C5alkyl. In certain embodiments, R1 is C6alkyl. In certain embodiments, R1 is selected from the group consisting of —CH3, —CH2CH3, —(CH2)2CH3, —(CH2)3CH3, —(CH2)4CH3, —(CH2)5CH3, —CH(CH3)2, —C(CH3)3, —CH(CH3)CH2CH3, —CH2CH(CH3)CH3, —CH(CH3)(CH2)2CH3, —CH2CH(CH3)CH2CH3, —(CH2)2CH(CH3)2, —CH(CH3)(CH2)3CH3, —CH2CH(CH3)(CH2)2CH3, and —(CH2)3CH(CH3)2. In certain embodiments, R1 is —CH3 or —CH2CH3. In certain embodiments, R1 is —CH3.
As generally described above, each instance of R2, R3, R4, and R5 is, independently, hydrogen, a carbohydrate group, or an oxygen protecting group.
In certain embodiments, at least one instance of R2, R3, R4, and R5 is, independently, hydrogen. In certain embodiments, at least two instances of R2, R3, R4, and R5 is, independently, hydrogen. In certain embodiments, at least three instances of R2, R3, R4, and R5 is, independently, hydrogen. In certain embodiments, each instance of R2, R3, R4, and R5 is, independently, hydrogen.
In certain embodiments, at least one instance of R2, R3, R4, and R5 is, independently, a carbohydrate group. In certain embodiments, at least two instances of R2, R3, R4, and R5 is, independently, a carbohydrate group. In certain embodiments, at least three instances of R2, R3, R4, and R5 is, independently, a carbohydrate group. In certain embodiments, each instance of R2, R3, R4, and R5 is, independently, a carbohydrate group. Exemplary carbohydrate groups are described above and herein. For example, in certain embodiments, the carbohydrate group is a monosaccaharide, e.g., glucose or galactose. In certain embodiments, the carbohydrate is a disaccharide, e.g., sucrose. In certain embodiments, the carbohydrate is an oligiosaccharide.
In certain embodiments, at least one instance of R2, R3, R4, and R5 is, independently, an oxygen protecting group. In certain embodiments, at least two instances of R2, R3, R4, and R5 is, independently, an oxygen protecting group. In certain embodiments, at least three instances of R2, R3, R4, and R5 is, independently, an oxygen protecting group. In certain embodiments, each instance of R2, R3, R4, and R5 is, independently, an oxygen protecting group. Exemplary carbohydrate groups are described above and herein. For example, in certain embodiments, the oxygen protecting group is selected from the group consisting of —Raa, —C(═O)SRaa, —C(═O)Raa, —CO2Raa, —C(═O)N(Rbb)2, —C(═NRbb)Raa, —C(═NRbb)ORaa, —C(═NRbb)N(Rbb)2, —S(═O)Raa, —SO2Raa, —Si(Raa)3, —P(Rcc)2, —P(Rcc)3, —P(═O)2Raa, —P(═O)(Raa)2, —P(═O)(ORcc)2, —P(═O)2N(Rbb)2, and —P(═O)(NRbb)2, wherein Raa, Rbb, and Rcc are as defined herein. In certain embodiments, the oxygen protecting group is —C(═O)Raa, wherein Raa is C1-10 alkyl. In certain embodiments, the oxygen protecting group is —C(═O)CH3.
As generally described above, X1 and X2 are each independently halogen. In certain embodiments, X1 and X2 are each independently selected from the group consisting of bromo, iodo, or chloro. In certain embodiments, X1 and X2 are each independently selected from the group consisting of bromo or chloro. In certain embodiments, at least one X1 and X2 is iodo. In certain embodiments, at least one X1 and X2 is bromo. In certain embodiments, at least one X1 and X2 is chloro. In certain embodiments, X1 and X2 are each iodo. In certain embodiments, X1 and X2 are each bromo. In certain embodiments, X1 and X2 are each chloro.
In certain embodiments, the sugar substituent:
is a stereoisomer selected from the group consisting of:
and wherein R2, R3, R4, and R5 are as defined herein. α-talose
Alpha and beta designate the stereochemistry at the anomeric carbon Cl of the sugar substituent. In certain embodiments, the sugar substituent is alpha at the anomeric carbon. In certain embodiments, the sugar substituent is beta at the anomeric carbon.
In certain embodiments, the sugar substituent is selected from the group consisting of α-glucose, β-glucose, α-mannose, β-mannose, α-galactose, and β-galactose. In certain embodiments, the sugar substituent is selected from the group consisting of α-glucose and β-glucose. In certain embodiments, the sugar substituent is selected from the group consisting of α-mannose and β-mannose. In certain embodiments, the sugar substituent is selected from the group consisting of α-galactose and β-galactose. In certain embodiments, the sugar substituent is α-glucose. In certain embodiments, the sugar substituent is β-glucose. In certain embodiments, the sugar substituent is α-mannose. In certain embodiments, the sugar substituent is 3-mannose. In certain embodiments, the sugar substituent is α-galactose. In certain embodiments, the sugar substituent is β-galactose.
In certain embodiments, the ruthenium complex:
is a stereoisomer of formula:
wherein X1 and X2 are as defined herein.
In certain embodiments, the ruthenium complex is a stereoisomer of formula (i). In certain embodiments, the ruthenium complex is a stereoisomer of formula (ii). In certain embodiments, the ruthenium complex is a stereoisomer of formula (iii).
In certain embodiments of Formula (I), wherein the ruthenium complex is a stereoisomer of formula (i), the compound is of Formula (I-a):
or a salt, isomer, hydrate, or solvate thereof, or combination thereof, wherein E, R1, R2, R3, R4, R5, X1, and X2, are as defined herein. In certain embodiments, E is —S—. In certain embodiments, E is —Se—. In certain embodiments, R1 is hydrogen. In certain embodiments, R1 is —CH3. In certain embodiments, each instance of R2, R3, R4, and R5 is hydrogen. In certain embodiments, X1 and X2 are each chloro (—Cl). In certain embodiments, the sugar substituent α-galactose or β-galactose. In certain embodiments, the sugar substituent is α-galactose. In certain embodiments, the sugar substituent is β-galactose.
In certain embodiments of Formula (I), wherein the sugar substituent is α-galactose or β-galactose, the compound is of Formula (I-b):
or a salt, isomer, hydrate, or solvate thereof, or combination thereof, wherein E, R1, R2, R3, R4, R5, X1, and X2, are as defined herein. In certain embodiments, E is —S—. In certain embodiments, E is —Se—. In certain embodiments, R1 is hydrogen. In certain embodiments, R1 is —CH3. In certain embodiments, each instance of R2, R3, R4, and R5 is hydrogen. In certain embodiments, X1 and X2 are each chloro (—Cl). In certain embodiments, the ruthenium complex is a stereoisomer of formula (i). In certain embodiments, the sugar substituent is α-galactose. In certain embodiments, the sugar substituent is β-galactose.
In certain embodiments of Formula (I-b), wherein the ruthenium complex is a stereoisomer of formula (i), the compound is of Formula (I-c):
or a salt, hydrate, or solvate thereof, or combination thereof, wherein E, R1, R2, R3, R4, R5, X1, and X2, are as defined herein. In certain embodiments, E is —S—. In certain embodiments, E is —Se—. In certain embodiments, R1 is hydrogen. In certain embodiments, R1 is —CH3. In certain embodiments, each instance of R2, R3, R4, and R5 is hydrogen. In certain embodiments, X1 and X2 are each chloro (—Cl). In certain embodiments, the sugar substituent is α-galactose. In certain embodiments, the sugar substituent is β-galactose.
In certain embodiments of Formula (I-c), wherein X1 and X2 are each chloro (—Cl), the compound is of Formula (I-d):
or a salt, hydrate, or solvate thereof, or combination thereof, wherein E, R1, R2, R3, R4, and R5, are as defined herein. In certain embodiments, E is —S—. In certain embodiments, E is —Se—. In certain embodiments, R1 is hydrogen. In certain embodiments, R1 is —CH3. In certain embodiments, each instance of R2, R3, R4, and R5 is hydrogen. In certain embodiments, the sugar substituent is α-galactose. In certain embodiments, the sugar substituent is β-galactose.
In certain embodiments of Formula (I-d), wherein R1 is —CH3, the compound is of Formula (I-e):
or a salt, hydrate, or solvate thereof, or combination thereof, wherein E, R2, R3, R4, and R5, are as defined herein. In certain embodiments, E is —S—. In certain embodiments, E is —Se—. In certain embodiments, each instance of R2, R3, R4, and R5 is hydrogen. In certain embodiments, the sugar substituent is α-galactose. In certain embodiments, the sugar substituent is β-galactose.
In certain embodiments of Formula (I-e), wherein the sugar substituent is β-galactose, the compound is of Formula (I-f):
or a salt, hydrate, or solvate thereof, or combination thereof, wherein E, R2, R3, R4, and R5, are as defined herein. In certain embodiments, E is —S—. In certain embodiments, E is —Se—. In certain embodiments, each instance of R2, R3, R4, and R5 is hydrogen.
In certain embodiments of Formula (I-f), wherein E is —S— and each instance of R2, R3, R4, and R5 is hydrogen, the compound is:
also referred to herein as Compound 1, or a hydrate or solvate thereof, or combination thereof.
The present invention provides pharmaceutical compositions comprising a compound of the present invention, e.g., a compound of Formula (I) or a salt, isomer, hydrate, or solvate thereof, or combination thereof, as described herein, and a pharmaceutically acceptable excipient. In certain embodiments, the compound of the present invention is provided in an effective amount in the pharmaceutical composition. In certain embodiments, the effective amount is a therapeutically effective amount. In certain embodiments, the effective amount is a prophylactically effective amount.
Pharmaceutically acceptable excipients include any and all solvents, diluents, or other liquid vehicles, dispersions, suspension aids, surface active agents, isotonic agents, thickening or emulsifying agents, preservatives, solid binders, lubricants and the like, as suited to the particular dosage form desired. General considerations in formulation and/or manufacture of pharmaceutical compositions agents can be found, for example, in Remington's Pharmaceutical Sciences, Sixteenth Edition, E. W. Martin (Mack Publishing Co., Easton, Pa., 1980), and Remington: The Science and Practice of Pharmacy, 21st Edition (Lippincott Williams & Wilkins, 2005).
Pharmaceutical compositions described herein can be prepared by any method known in the art of pharmacology. In general, such preparatory methods include the steps of bringing the compound of the present invention (the “active ingredient”) into association with a carrier and/or one or more other accessory ingredients, and then, if necessary and/or desirable, shaping and/or packaging the product into a desired single- or multi-dose unit.
Pharmaceutical compositions can be prepared, packaged, and/or sold in bulk, as a single unit dose, and/or as a plurality of single unit doses. As used herein, a “unit dose” is discrete amount of the pharmaceutical composition comprising a predetermined amount of the active ingredient. The amount of the active ingredient is generally equal to the dosage of the active ingredient which would be administered to a subject and/or a convenient fraction of such a dosage such as, for example, one-half or one-third of such a dosage.
Relative amounts of the active ingredient, the pharmaceutically acceptable excipient, and/or any additional ingredients in a pharmaceutical composition of the invention will vary, depending upon the identity, size, and/or condition of the subject treated and further depending upon the route by which the composition is to be administered. By way of example, the composition may comprise between 0.1% and 100% (w/w) active ingredient.
Pharmaceutically acceptable excipients used in the manufacture of provided pharmaceutical compositions include inert diluents, dispersing and/or granulating agents, surface active agents and/or emulsifiers, disintegrating agents, binding agents, preservatives, buffering agents, lubricating agents, and/or oils. Excipients such as cocoa butter and suppository waxes, coloring agents, coating agents, sweetening, flavoring, and perfuming agents may also be present in the composition.
Exemplary diluents include calcium carbonate, sodium carbonate, calcium phosphate, dicalcium phosphate, calcium sulfate, calcium hydrogen phosphate, sodium phosphate lactose, sucrose, cellulose, microcrystalline cellulose, kaolin, mannitol, sorbitol, inositol, sodium chloride, dry starch, cornstarch, powdered sugar, and mixtures thereof.
Exemplary granulating and/or dispersing agents include potato starch, corn starch, tapioca starch, sodium starch glycolate, clays, alginic acid, guar gum, citrus pulp, agar, bentonite, cellulose and wood products, natural sponge, cation-exchange resins, calcium carbonate, silicates, sodium carbonate, cross-linked poly(vinyl-pyrrolidone) (crospovidone), sodium carboxymethyl starch (sodium starch glycolate), carboxymethyl cellulose, cross-linked sodium carboxymethyl cellulose (croscarmellose), methylcellulose, pregelatinized starch (starch 1500), microcrystalline starch, water insoluble starch, calcium carboxymethyl cellulose, magnesium aluminum silicate (Veegum), sodium lauryl sulfate, quaternary ammonium compounds, and mixtures thereof.
Exemplary surface active agents and/or emulsifiers include natural emulsifiers (e.g. acacia, agar, alginic acid, sodium alginate, tragacanth, chondrux, cholesterol, xanthan, pectin, gelatin, egg yolk, casein, wool fat, cholesterol, wax, and lecithin), colloidal clays (e.g. bentonite [aluminum silicate] and Veegum [magnesium aluminum silicate]), long chain amino acid derivatives, high molecular weight alcohols (e.g. stearyl alcohol, cetyl alcohol, oleyl alcohol, triacetin monostearate, ethylene glycol distearate, glyceryl monostearate, and propylene glycol monostearate, polyvinyl alcohol), carbomers (e.g. carboxy polymethylene, polyacrylic acid, acrylic acid polymer, and carboxyvinyl polymer), carrageenan, cellulosic derivatives (e.g. carboxymethylcellulose sodium, powdered cellulose, hydroxymethyl cellulose, hydroxypropyl cellulose, hydroxypropyl methylcellulose, methylcellulose), sorbitan fatty acid esters (e.g. polyoxyethylene sorbitan monolaurate [Tween 20], polyoxyethylene sorbitan [Tween 60], polyoxyethylene sorbitan monooleate [Tween 80], sorbitan monopalmitate [Span 40], sorbitan monostearate [Span 60], sorbitan tristearate [Span 65], glyceryl monooleate, sorbitan monooleate [Span 80]), polyoxyethylene esters (e.g. polyoxyethylene monostearate [Myrj 45], polyoxyethylene hydrogenated castor oil, polyethoxylated castor oil, polyoxymethylene stearate, and Solutol), sucrose fatty acid esters, polyethylene glycol fatty acid esters (e.g. Cremophor), polyoxyethylene ethers, (e.g. polyoxyethylene lauryl ether [Brij 30]), poly(vinyl-pyrrolidone), diethylene glycol monolaurate, triethanolamine oleate, sodium oleate, potassium oleate, ethyl oleate, oleic acid, ethyl laurate, sodium lauryl sulfate, Pluronic F 68, Poloxamer 188, cetrimonium bromide, cetylpyridinium chloride, benzalkonium chloride, docusate sodium, and/or mixtures thereof.
Exemplary binding agents include starch (e.g. cornstarch and starch paste), gelatin, sugars (e.g. sucrose, glucose, dextrose, dextrin, molasses, lactose, lactitol, mannitol, etc.), natural and synthetic gums (e.g. acacia, sodium alginate, extract of Irish moss, panwar gum, ghatti gum, mucilage of isapol husks, carboxymethylcellulose, methylcellulose, ethylcellulose, hydroxyethylcellulose, hydroxypropyl cellulose, hydroxypropyl methylcellulose, microcrystalline cellulose, cellulose acetate, poly(vinyl-pyrrolidone), magnesium aluminum silicate (Veegum), and larch arabogalactan), alginates, polyethylene oxide, polyethylene glycol, inorganic calcium salts, silicic acid, polymethacrylates, waxes, water, alcohol, and/or mixtures thereof.
Exemplary preservatives include antioxidants, chelating agents, antimicrobial preservatives, antifungal preservatives, alcohol preservatives, acidic preservatives, and other preservatives.
Exemplary antioxidants include alpha tocopherol, ascorbic acid, acorbyl palmitate, butylated hydroxyanisole, butylated hydroxytoluene, monothioglycerol, potassium metabisulfite, propionic acid, propyl gallate, sodium ascorbate, sodium bisulfite, sodium metabisulfite, and sodium sulfite.
Exemplary chelating agents include ethylenediaminetetraacetic acid (EDTA) and salts and hydrates thereof (e.g., sodium edetate, disodium edetate, trisodium edetate, calcium disodium edetate, dipotassium edetate, and the like), citric acid and salts and hydrates thereof (e.g., citric acid monohydrate), fumaric acid and salts and hydrates thereof, malic acid and salts and hydrates thereof, phosphoric acid and salts and hydrates thereof, and tartaric acid and salts and hydrates thereof. Exemplary antimicrobial preservatives include benzalkonium chloride, benzethonium chloride, benzyl alcohol, bronopol, cetrimide, cetylpyridinium chloride, chlorhexidine, chlorobutanol, chlorocresol, chloroxylenol, cresol, ethyl alcohol, glycerin, hexetidine, imidurea, phenol, phenoxyethanol, phenylethyl alcohol, phenylmercuric nitrate, propylene glycol, and thimerosal.
Exemplary antifungal preservatives include butyl paraben, methyl paraben, ethyl paraben, propyl paraben, benzoic acid, hydroxybenzoic acid, potassium benzoate, potassium sorbate, sodium benzoate, sodium propionate, and sorbic acid.
Exemplary alcohol preservatives include ethanol, polyethylene glycol, phenol, phenolic compounds, bisphenol, chlorobutanol, hydroxybenzoate, and phenylethyl alcohol.
Exemplary acidic preservatives include vitamin A, vitamin C, vitamin E, beta-carotene, citric acid, acetic acid, dehydroacetic acid, ascorbic acid, sorbic acid, and phytic acid.
Other preservatives include tocopherol, tocopherol acetate, deteroxime mesylate, cetrimide, butylated hydroxyanisol (BHA), butylated hydroxytoluened (BHT), ethylenediamine, sodium lauryl sulfate (SLS), sodium lauryl ether sulfate (SLES), sodium bisulfite, sodium metabisulfite, potassium sulfite, potassium metabisulfite, Glydant Plus, Phenonip, methylparaben, Germall 115, Germaben II, Neolone, Kathon, and Euxyl. In certain embodiments, the preservative is an anti-oxidant. In other embodiments, the preservative is a chelating agent.
Exemplary buffering agents include citrate buffer solutions, acetate buffer solutions, phosphate buffer solutions, ammonium chloride, calcium carbonate, calcium chloride, calcium citrate, calcium glubionate, calcium gluceptate, calcium gluconate, D-gluconic acid, calcium glycerophosphate, calcium lactate, propanoic acid, calcium levulinate, pentanoic acid, dibasic calcium phosphate, phosphoric acid, tribasic calcium phosphate, calcium hydroxide phosphate, potassium acetate, potassium chloride, potassium gluconate, potassium mixtures, dibasic potassium phosphate, monobasic potassium phosphate, potassium phosphate mixtures, sodium acetate, sodium bicarbonate, sodium chloride, sodium citrate, sodium lactate, dibasic sodium phosphate, monobasic sodium phosphate, sodium phosphate mixtures, tromethamine, magnesium hydroxide, aluminum hydroxide, alginic acid, pyrogen-free water, isotonic saline, Ringer's solution, ethyl alcohol, and mixtures thereof.
Exemplary lubricating agents include magnesium stearate, calcium stearate, stearic acid, silica, talc, malt, glyceryl behanate, hydrogenated vegetable oils, polyethylene glycol, sodium benzoate, sodium acetate, sodium chloride, leucine, magnesium lauryl sulfate, sodium lauryl sulfate, and mixtures thereof.
Exemplary natural oils include almond, apricot kernel, avocado, babassu, bergamot, black current seed, borage, cade, camomile, canola, caraway, carnauba, castor, cinnamon, cocoa butter, coconut, cod liver, coffee, corn, cotton seed, emu, eucalyptus, evening primrose, fish, flaxseed, geraniol, gourd, grape seed, hazel nut, hyssop, isopropyl myristate, jojoba, kukui nut, lavandin, lavender, lemon, litsea cubeba, macademia nut, mallow, mango seed, meadowfoam seed, mink, nutmeg, olive, orange, orange roughy, palm, palm kernel, peach kernel, peanut, poppy seed, pumpkin seed, rapeseed, rice bran, rosemary, safflower, sandalwood, sasquana, savoury, sea buckthorn, sesame, shea butter, silicone, soybean, sunflower, tea tree, thistle, tsubaki, vetiver, walnut, and wheat germ oils. Exemplary synthetic oils include, but are not limited to, butyl stearate, caprylic triglyceride, capric triglyceride, cyclomethicone, diethyl sebacate, dimethicone 360, isopropyl myristate, mineral oil, octyldodecanol, oleyl alcohol, silicone oil, and mixtures thereof.
Liquid dosage forms for oral and parenteral administration include pharmaceutically acceptable emulsions, microemulsions, solutions, suspensions, syrups and elixirs. In addition to the active ingredients, the liquid dosage forms may comprise inert diluents commonly used in the art such as, for example, water or other solvents, solubilizing agents and emulsifiers such as ethyl alcohol, isopropyl alcohol, ethyl carbonate, ethyl acetate, benzyl alcohol, benzyl benzoate, propylene glycol, 1,3-butylene glycol, dimethylformamide, oils (e.g., cottonseed, groundnut, corn, germ, olive, castor, and sesame oils), glycerol, tetrahydrofurfuryl alcohol, polyethylene glycols and fatty acid esters of sorbitan, and mixtures thereof. Besides inert diluents, the oral compositions can include adjuvants such as wetting agents, emulsifying and suspending agents, sweetening, flavoring, and perfuming agents. In certain embodiments for parenteral administration, the conjugates of the invention are mixed with solubilizing agents such as Cremophor, alcohols, oils, modified oils, glycols, polysorbates, cyclodextrins, polymers, and mixtures thereof.
Injectable preparations, for example, sterile injectable aqueous or oleaginous suspensions can be formulated according to the known art using suitable dispersing or wetting agents and suspending agents. The sterile injectable preparation can be a sterile injectable solution, suspension or emulsion in a nontoxic parenterally acceptable diluent or solvent, for example, as a solution in 1,3-butanediol. Among the acceptable vehicles and solvents that can be employed are water, Ringer's solution, U.S.P. and isotonic sodium chloride solution. In addition, sterile, fixed oils are conventionally employed as a solvent or suspending medium. For this purpose any bland fixed oil can be employed including synthetic mono- or diglycerides. In addition, fatty acids such as oleic acid are used in the preparation of injectables.
The injectable formulations can be sterilized, for example, by filtration through a bacterial-retaining filter, or by incorporating sterilizing agents in the form of sterile solid compositions which can be dissolved or dispersed in sterile water or other sterile injectable medium prior to use.
In order to prolong the effect of a drug, it is often desirable to slow the absorption of the drug from subcutaneous or intramuscular injection. This can be accomplished by the use of a liquid suspension of crystalline or amorphous material with poor water solubility. The rate of absorption of the drug then depends upon its rate of dissolution which, in turn, may depend upon crystal size and crystalline form. Alternatively, delayed absorption of a parenterally administered drug form is accomplished by dissolving or suspending the drug in an oil vehicle.
Compositions for rectal or vaginal administration are typically suppositories which can be prepared by mixing the conjugates of this invention with suitable non-irritating excipients or carriers such as cocoa butter, polyethylene glycol or a suppository wax which are solid at ambient temperature but liquid at body temperature and therefore melt in the rectum or vaginal cavity and release the active ingredient.
Solid dosage forms for oral administration include capsules, tablets, pills, powders, and granules. In such solid dosage forms, the active ingredient is mixed with at least one inert, pharmaceutically acceptable excipient or carrier such as sodium citrate or dicalcium phosphate and/or a) fillers or extenders such as starches, lactose, sucrose, glucose, mannitol, and silicic acid, b) binders such as, for example, carboxymethylcellulose, alginates, gelatin, polyvinylpyrrolidinone, sucrose, and acacia, c) humectants such as glycerol, d) disintegrating agents such as agar, calcium carbonate, potato or tapioca starch, alginic acid, certain silicates, and sodium carbonate, e) solution retarding agents such as paraffin, f) absorption accelerators such as quaternary ammonium compounds, g) wetting agents such as, for example, cetyl alcohol and glycerol monostearate, h) absorbents such as kaolin and bentonite clay, and i) lubricants such as talc, calcium stearate, magnesium stearate, solid polyethylene glycols, sodium lauryl sulfate, and mixtures thereof. In the case of capsules, tablets and pills, the dosage form may comprise buffering agents.
Solid compositions of a similar type can be employed as fillers in soft and hard-filled gelatin capsules using such excipients as lactose or milk sugar as well as high molecular weight polyethylene glycols and the like. The solid dosage forms of tablets, dragees, capsules, pills, and granules can be prepared with coatings and shells such as enteric coatings and other coatings well known in the pharmaceutical formulating art. They may optionally comprise opacifying agents and can be of a composition that they release the active ingredient(s) only, or preferentially, in a certain part of the intestinal tract, optionally, in a delayed manner. Examples of embedding compositions which can be used include polymeric substances and waxes. Solid compositions of a similar type can be employed as fillers in soft and hard-filled gelatin capsules using such excipients as lactose or milk sugar as well as high molecular weight polethylene glycols and the like.
The active ingredient can be in micro-encapsulated form with one or more excipients as noted above. The solid dosage forms of tablets, dragees, capsules, pills, and granules can be prepared with coatings and shells such as enteric coatings, release controlling coatings and other coatings well known in the pharmaceutical formulating art. In such solid dosage forms the active ingredient can be admixed with at least one inert diluent such as sucrose, lactose or starch. Such dosage forms may comprise, as is normal practice, additional substances other than inert diluents, e.g., tableting lubricants and other tableting aids such a magnesium stearate and microcrystalline cellulose. In the case of capsules, tablets and pills, the dosage forms may comprise buffering agents. They may optionally comprise opacifying agents and can be of a composition that they release the active ingredient(s) only, or preferentially, in a certain part of the intestinal tract, optionally, in a delayed manner.
Examples of embedding compositions which can be used include polymeric substances and waxes.
Dosage forms for topical and/or transdermal administration of a compound of this invention may include ointments, pastes, creams, lotions, gels, powders, solutions, sprays, inhalants and/or patches. Generally, the active ingredient is admixed under sterile conditions with a pharmaceutically acceptable carrier and/or any needed preservatives and/or buffers as can be required. Additionally, the present invention contemplates the use of transdermal patches, which often have the added advantage of providing controlled delivery of an active ingredient to the body. Such dosage forms can be prepared, for example, by dissolving and/or dispensing the active ingredient in the proper medium. Alternatively or additionally, the rate can be controlled by either providing a rate controlling membrane and/or by dispersing the active ingredient in a polymer matrix and/or gel.
Suitable devices for use in delivering intradermal pharmaceutical compositions described herein include short needle devices such as those described in U.S. Pat. Nos. 4,886,499; 5,190,521; 5,328,483; 5,527,288; 4,270,537; 5,015,235; 5,141,496; and 5,417,662. Intradermal compositions can be administered by devices which limit the effective penetration length of a needle into the skin, such as those described in PCT publication WO 99/34850 and functional equivalents thereof. Jet injection devices which deliver liquid vaccines to the dermis via a liquid jet injector and/or via a needle which pierces the stratum corneum and produces a jet which reaches the dermis are suitable. Jet injection devices are described, for example, in U.S. Pat. Nos. 5,480,381; 5,599,302; 5,334,144; 5,993,412; 5,649,912; 5,569,189; 5,704,911; 5,383,851; 5,893,397; 5,466,220; 5,339,163; 5,312,335; 5,503,627; 5,064,413; 5,520,639; 4,596,556; 4,790,824; 4,941,880; 4,940,460; and PCT publications WO 97/37705 and WO 97/13537. Ballistic powder/particle delivery devices which use compressed gas to accelerate vaccine in powder form through the outer layers of the skin to the dermis are suitable. Alternatively or additionally, conventional syringes can be used in the classical mantoux method of intradermal administration.
Formulations suitable for topical administration include, but are not limited to, liquid and/or semi liquid preparations such as liniments, lotions, oil in water and/or water in oil emulsions such as creams, ointments and/or pastes, and/or solutions and/or suspensions. Topically-administrable formulations may, for example, comprise from about 1% to about 10% (w/w) active ingredient, although the concentration of the active ingredient can be as high as the solubility limit of the active ingredient in the solvent. Formulations for topical administration may further comprise one or more of the additional ingredients described herein.
A pharmaceutical composition of the invention can be prepared, packaged, and/or sold in a formulation suitable for pulmonary administration via the buccal cavity. Such a formulation may comprise dry particles which comprise the active ingredient and which have a diameter in the range from about 0.5 to about 7 nanometers or from about 1 to about 6 nanometers. Such compositions are conveniently in the form of dry powders for administration using a device comprising a dry powder reservoir to which a stream of propellant can be directed to disperse the powder and/or using a self propelling solvent/powder dispensing container such as a device comprising the active ingredient dissolved and/or suspended in a low-boiling propellant in a sealed container. Such powders comprise particles wherein at least 98% of the particles by weight have a diameter greater than 0.5 nanometers and at least 95% of the particles by number have a diameter less than 7 nanometers. Alternatively, at least 95% of the particles by weight have a diameter greater than 1 nanometer and at least 90% of the particles by number have a diameter less than 6 nanometers. Dry powder compositions may include a solid fine powder diluent such as sugar and are conveniently provided in a unit dose form.
Low boiling propellants generally include liquid propellants having a boiling point of below 65° F. at atmospheric pressure. Generally the propellant may constitute 50 to 99.9% (w/w) of the composition, and the active ingredient may constitute 0.1 to 20% (w/w) of the composition. The propellant may further comprise additional ingredients such as a liquid non-ionic and/or solid anionic surfactant and/or a solid diluent (which may have a particle size of the same order as particles comprising the active ingredient).
Pharmaceutical compositions of the invention formulated for pulmonary delivery may provide the active ingredient in the form of droplets of a solution and/or suspension. Such formulations can be prepared, packaged, and/or sold as aqueous and/or dilute alcoholic solutions and/or suspensions, optionally sterile, comprising the active ingredient, and may conveniently be administered using any nebulization and/or atomization device. Such formulations may further comprise one or more additional ingredients including, but not limited to, a flavoring agent such as saccharin sodium, a volatile oil, a buffering agent, a surface active agent, and/or a preservative such as methylhydroxybenzoate. The droplets provided by this route of administration may have an average diameter in the range from about 0.1 to about 200 nanometers.
Formulations described herein as being useful for pulmonary delivery are useful for intranasal delivery of a pharmaceutical composition of the invention. Another formulation suitable for intranasal administration is a coarse powder comprising the active ingredient and having an average particle from about 0.2 to 500 micrometers. Such a formulation is administered. by rapid inhalation through the nasal passage from a container of the powder held close to the nares.
Formulations for nasal administration may, for example, comprise from about as little as 0.1% (w/w) and as much as 100% (w/w) of the active ingredient, and may comprise one or more of the additional ingredients described herein. A pharmaceutical composition of the invention can be prepared, packaged, and/or sold in a formulation for buccal administration. Such formulations may, for example, be in the form of tablets and/or lozenges made using conventional methods, and may contain, for example, 0.1 to 20% (w/w) active ingredient, the balance comprising an orally dissolvable and/or degradable composition and, optionally, one or more of the additional ingredients described herein. Alternately, formulations for buccal administration may comprise a powder and/or an aerosolized and/or atomized solution and/or suspension comprising the active ingredient. Such powdered, aerosolized, and/or aerosolized formulations, when dispersed, may have an average particle and/or droplet size in the range from about 0.1 to about 200 nanometers, and may further comprise one or more of the additional ingredients described herein.
A pharmaceutical composition of the invention can be prepared, packaged, and/or sold in a formulation for ophthalmic administration. Such formulations may, for example, be in the form of eye drops including, for example, a 0.1/1.0% (w/w) solution and/or suspension of the active ingredient in an aqueous or oily liquid carrier. Such drops may further comprise buffering agents, salts, and/or one or more other of the additional ingredients described herein. Other opthalmically-administrable formulations which are useful include those which comprise the active ingredient in microcrystalline form and/or in a liposomal preparation. Ear drops and/or eye drops are contemplated as being within the scope of this invention.
Although the descriptions of pharmaceutical compositions provided herein are principally directed to pharmaceutical compositions which are suitable for administration to humans, it will be understood by the skilled artisan that such compositions are generally suitable for administration to animals of all sorts. Modification of pharmaceutical compositions suitable for administration to humans in order to render the compositions suitable for administration to various animals is well understood, and the ordinarily skilled veterinary pharmacologist can design and/or perform such modification with ordinary experimentation.
Compounds provided herein are typically formulated in dosage unit form for ease of administration and uniformity of dosage. It will be understood, however, that the total daily usage of the compositions of the present invention will be decided by the attending physician within the scope of sound medical judgment. The specific therapeutically effective dose level for any particular subject or organism will depend upon a variety of factors including the disease, disorder, or condition being treated and the severity of the disorder; the activity of the specific active ingredient employed; the specific composition employed; the age, body weight, general health, sex and diet of the subject; the time of administration, route of administration, and rate of excretion of the specific active ingredient employed; the duration of the treatment; drugs used in combination or coincidental with the specific active ingredient employed; and like factors well known in the medical arts.
The compounds and compositions provided herein can be administered by any route, including enteral (e.g., oral), parenteral, intravenous, intramuscular, intra-arterial, intramedullary, intrathecal, subcutaneous, intraventricular, transdermal, interdermal, rectal, intravaginal, intraperitoneal, topical (as by powders, ointments, creams, and/or drops), mucosal, nasal, bucal, sublingual; by intratracheal instillation, bronchial instillation, and/or inhalation; and/or as an oral spray, nasal spray, and/or aerosol. In general the most appropriate route of administration will depend upon a variety of factors including the nature of the agent, the therapeutic regimen, and/or the condition of the subject. Oral administration is the preferred mode of administration. However, in certain embodiments, the subject may not be in a condition to tolerate oral administration, and thus intravenous, intramuscular, and/or rectal administration are also preferred altermative modes of adminsitration.
The exact amount of a compound required to achieve an effective amount will vary from subject to subject, depending, for example, on species, age, and general condition of a subject, severity of the side effects or disorder, identity of the particular compound(s), mode of administration, and the like. The desired dosage can be delivered three times a day, two times a day, once a day, every other day, every third day, every week, every two weeks, every three weeks, or every four weeks. In certain embodiments, the desired dosage can be delivered using multiple administrations (e.g., two, three, four, five, six, seven, eight, nine, ten, eleven, twelve, thirteen, fourteen, or more administrations).
In certain embodiments, an effective amount of a compound for administration one or more times a day to a 70 kg adult human may comprise about 1 mg to about 3000 mg, about 1 mg to about 2000 mg, about 1 mg to about 1000 mg, about 1 mg to about 100 mg, about 10 mg to about 100 mg, or about 20 mg to about 100 mg, of a compound per unit dosage form.
In certain embodiments, the compounds of the invention may be administered at dosage levels sufficient to deliver from about 1 mg/kg to about 100 mg/kg, from about 0.01 mg/kg to about 100 mg/kg, preferably from about 0.1 mg/kg to about 100 mg/kg, preferably from about 0.5 mg/kg to about 100 mg/kg, from about 10 mg/kg to about 100 mg/kg, from about 20 mg/kg to about 100 mg/kg, and more preferably from about 25 mg/kg to about 100 mg/kg, of subject body weight per day, one or more times a day, to obtain the desired therapeutic effect.
It will be appreciated that dose ranges as described herein provide guidance for the administration of provided pharmaceutical compositions to an adult. The amount to be administered to, for example, a child or an adolescent can be determined by a medical practitioner or person skilled in the art and can be lower or the same as that administered to an adult.
It will be also appreciated that a compound or composition, as described herein, can be administered in combination with one or more additional therapeutically active agents. Therapeutically active agents include but are not limited to small organic molecules (i.e., having a molecular weight under 800 g/mol) such as drug compounds (e.g., compounds approved by the US Food and Drug Administration as provided in the Code of Federal Regulations (CFR)), peptides, proteins, carbohydrates, monosaccharides, oligosaccharides, polysaccharides, nucleoproteins, mucoproteins, lipoproteins, synthetic polypeptides or proteins, small organic molecules linked to proteins, glycoproteins, steroids, nucleic acids, DNAs, RNAs, nucleotides, nucleosides, oligonucleotides, antisense oligonucleotides, lipids, hormones, vitamins, vaccines, gases, and cells. Specific examples of therapeutically active agents are further described herein. The compounds or compositions can be administered in combination with additional therapeutically active agents that improve their bioavailability, reduce and/or modify their metabolism, inhibit their excretion, and/or modify their distribution within the body. It will also be appreciated that the therapy employed may achieve a desired effect for the same disorder, and/or it may achieve different effects. In general, each particular agent will be administered at a dose and/or on a time schedule determined for that agent. In will further be appreciated that the additional agents utilized in this combination can be administered together in a single pharmaceutical composition or administered separately in different pharmaceutical compositions. The particular combination to employ in a regimen will take into account compatibility of the inventive compound with the additional agent and/or the desired therapeutic effect to be achieved. In general, it is expected that additional agents utilized in combination be utilized at levels that do not exceed the levels at which they are utilized individually. In some embodiments, the levels utilized in combination will be lower than those utilized individually.
Also encompassed by the invention are kits (e.g., pharmaceutical packs). The kits provided may comprise an inventive pharmaceutical composition or compound and a container (e.g., a vial, ampule, bottle, syringe, and/or dispenser package, or other suitable container). In some embodiments, provided kits may optionally further include a second container comprising a pharmaceutical excipient for dilution or suspension of an inventive pharmaceutical composition or compound. In some embodiments, the inventive pharmaceutical composition or compound provided in the container and the second container are combined to form one unit dosage form.
The present invention also provides methods of use and treatment of compounds of the present invention, e.g., compounds of Formula (I), or salts, isomers, hydrates, or solvates thereof, or combinations thereof, as described herein.
A “subject” to which administration is contemplated is a human subject,e.g., a male or female human of any age group, e.g., a pediatric subject (e.g, infant, child, adolescent) or adult subject (e.g., young adult, middle-aged adult or senior adult.
“Treat,” “treating” and “treatment” contemplate an action that occurs while a subject is suffering from a condition which reduces the severity of the condition or symptoms associated with the condition, or retards or slows the progression of the condition or symptoms associated with the condition (“therapeutic treatment”), and also contemplates an action that occurs before a subject begins to suffer from the condition and which inhibits or reduces the severity of the condition or symtoms associated with the condition (“prophylactic treatment”). For example, “treating a malarial infection” involves administering a compound of the present invention to a subject having malarial infection, or a subject exhibiting one or more symptoms of malarial infection (e.g., cyclical occurrence of sudden coldness followed by rigor and then fever and sweating, joint pain, vomiting, anemia, hemoglobinuria, retinal damage, and/or convulsions) (“therapeutically treating a malarial infection”), and also involves preventative care, such as administering a compound of the present invention to a subject at risk of malarial infection (“prophylactically treating a malarial infection”).
An “effective amount” of a compound refers to an amount sufficient to elicit the desired biological response, i.e., treating the condition (e.g., a malarial infection, an inflammatory condition). As will be appreciated by those of ordinary skill in this art, the effective amount of a compound of the invention may vary depending on such factors as the desired biological endpoint, the pharmacokinetics of the compound, the condition being treated, the mode of administration, and the age and health of the subject. An effective amount encompasses therapeutic and prophylactic treatment.
A “therapeutically effective amount” of a compound is an amount sufficient to provide a therapeutic benefit in the treatment of a condition or to delay or minimize one or more symptoms associated with the condition. A therapeutically effective amount of a compound means an amount of a compound of the present invention, alone or in combination with other therapies, which provides a therapeutic benefit in the treatment of the condition. The term “therapeutically effective amount” can encompass an amount that improves overall therapy, reduces or avoids symptoms or causes of the condition, or enhances the therapeutic efficacy of another therapeutically active agent.
A “prophylactically effective amount” of a compound is an amount sufficient to prevent a condition, or one or more symptoms associated with the condition or prevent its recurrence. A prophylactically effective amount of a compound means an amount of a compound of the present invention, alone or in combination with other agents, which provides a prophylactic benefit in the prevention of the condition. The term “prophylactically effective amount” can encompass an amount that improves overall prophylaxis or enhances the prophylactic efficacy of another prophylactic agent.
In certain embodiments, the present invention provides a method of treating a malaria infection comprising administering an effective amount of a compound of Formula (I), or a salt, isomer, hydrate, or solvate thereof, or combination thereof, to a subject in need thereof.
In certain embodiments, the present invention provides a method of treating a malaria infection comprising instructing a subject in need thereof to administer an effective amount of a compound of Formula (I), or a salt, isomer, hydrate, or solvate thereof, or combination thereof.
In certain embodiments, the present invention provides a compound of Formula (I) or a salt, isomer, hydrate, or solvate thereof, or combination thereof, for use in treating a malaria infection.
In certain embodiments, the effective amount is a therapeutically effective amount. For example, in certain embodiments, the method improves survival from a malarial infection in the subject. In certain embodiments, the subject has a suspected or confirmed malaria infection.
In certain embodiments, the effective amount is a prophylatically effective amount. For example, in certain embodiments, the method prevents or reduces the likelihood of malaria infection in the subject, e.g., in certain embodiments, the method comprises administering a compound of Formula (I) to a subject in need thereof in an amount sufficient to prevent or reduce the likelihood of an infection by malaria parasites. In certain embodiments, the subject is at risk to malaria infection (e.g., has been exposed to another subject who has a suspected or confirmed malaria infection).
In certain embodiments, the malaria infection is severe malaria due to a Plasmodium infection. In certain embodiments, the Plasmodium infection is a Plasmodium falciparum infection, a Plasmodium vivax infection, Plasmodium malariae infection, a Plasmodium ovale infection, or a Plasmodium knowlesi infection. In certain embodiments, the Plasmodium infection is a Plasmodium falciparum infection. In certain embodiments, the Plasmodium infection is a Plasmodium vivax infection. In certain embodiments, the Plasmodium infection is a Plasmodium malariae infection. In certain embodiments, the Plasmodium infection is a Plasmodium ovale infection. In certain embodiments, the Plasmodium infection is a Plasmodium knowlesi infection.
In certain embodiments, the malarial infection is cerebral malaria (CM). In certain embodiments, the malaria infection is pregnancy-associated malaria (PAM). In certain embodiments, the malarial infection is a recrudescent (relapsed) malarial infection.
Compounds of the present invention have been found to induce the expression of HO-1, and thus compounds of the present invention are also contemplated useful in the treatment of an inflammatory condition, such as ALI and ARDS, which is not necessarily associated with malaria infection. However, in certain embodiments, the subject suffering from a malaria infection is further suffering from an inflammatory condition, e.g. acute lung injury (ALI) or acute respiratory distress syndrome (ARDS). In certain embodiments, the inflammatory condition is complication of the malaria infection. ARDS is considered to be the most severe form of ALI in malaria. ALI and ARDS have been described as complications arising in subjects suffering from malaria infection, and could be associated with cerebral malaria; see, e.g., Mohan et al., J Vector Borne Dis. (2008) 45:179-93; Taylor et al., Treat Respir Med (2006) 5: 419-28.
Thus, in certain embodiments, the present invention provides a method of treating acute lung injury (ALI) comprising administering an effective amount of a compound of Formula (I), or a salt, isomer, hydrate, or solvate thereof, or combination thereof, to a subject in need thereof.
In certain embodiments, the present invention provides a method of treating acute lung injury comprising instructing a subject in need thereof to administer an effective amount of a compound of Formula (I), or a salt, isomer, hydrate, or solvate thereof, or combination thereof.
In certain embodiments, the present invention provides a compound of Formula (I) or a salt, isomer, hydrate, or solvate thereof, or combination thereof, for use in treating acute lung injury.
In certain embodiments, the acute lung injury is malaria-associated acute lung injury (M-AALI).
In certain embodiments, the effective amount is a therapeutically effective amount. For example, in certain embodiments, the method improves survival from malaria associated acute lung injury in the subject. In certain embodiments, the subject has a suspected or confirmed malaria infection.
In certain embodiments, the effective amount is a prophylatically effective amount. For example, in certain embodiments, the method prevents or reduces the likelihood of malaria-associated acute lung injury in the subject.
In certain embodiments, the present invention provides a method of treating acute respiratory distress syndrome (ARDS) comprising administering an effective amount of a compound of Formula (I), or a salt, isomer, hydrate, or solvate thereof, or combination thereof, to a subject in need thereof.
In certain embodiments, the present invention provides a method of treating acute respiratory distress syndrome (ARDS) comprising instructing a subject in need thereof to administer an effective amount of a compound of Formula (I), or a salt, isomer, hydrate, or solvate thereof, or combination thereof.
In certain embodiments, the present invention provides a compound of Formula (I) or a salt, isomer, hydrate, or solvate thereof, or combination thereof, for use in treating acute respiratory distress syndrome (ARDS).
In certain embodiments, the acute respiratory distress syndrome is malaria-associated acute respiratory distress syndrome (M-AARDS).
In certain embodiments, the effective amount is a therapeutically effective amount. For example, in certain embodiments, the method improves survival from malaria-associated acute respiratory distress syndrome in the subject. In certain embodiments, the subject has a suspected or confirmed malaria infection.
In certain embodiments, the effective amount is a prophylatically effective amount. For example, in certain embodiments, the method prevents or reduces the likelihood of malaria-associated acute respiratory distress syndrome in the subject.
In any of the above described methods, one or more additional therapeutic agents (also referred to as the “agent”) may be administered concurrently with, prior to, or subsequent to, the compound of Formula (I), as described herein. The agent may be added at the same time as the compound of Formula (I) (simultaneous administration), before or after administration of the compound of Formula (I) (sequential administration), or any combination thereof. For example, in certain embodiments, the agent is administered first, followed by simultaneous administration of the agent and the compound of Formula (I). In certain embodiments, the compound of Formula (I) is administered first, followed by simultaneous administration of the agent and the compound of Formula (I). In any of the above embodiments, either the agent or the compound of Formula (I) may be further administered alone after the simultaneous administration.
In certain embodiments, the compound of Formula (I) is used as an adjunctive agent in combination with one or more additional therapeutic agents (also referred to as the “primary agent”). As used herein, an “adjunctive agent” or “adjuvant” is an agent used in combination with the primary agent, and which potentiates the therapeutic effects (e.g., either additively or synergistically) of the primary agent. Adjunctive therapy includes administration of the adjuvant before administration of the primary agent (“neoadjuvant therapy”), during administration of the primary agent (“concomitant” or “concurrent systemic adjuvant therapy”), or after administration of the primary agent.
In certain embodiments, the additional therapeutic agent is an anti-malarial agent. Exemplary anti-malarial agents include, but are not limited to, quinazolines (e.g., 2,4-diamino-6(3,4-dichlorobenzyamine quinazoline (PAM1392), 2,4-diamino-6-[93,4-dichiorobenzyl0-nitrosoamino]-quinazoline (CI-679)). protein kinase inhibitors (e.g., radicicol, staurosproin, genistein, methyl 2,5-dihydroxycinnamate, tyrphostin B44 and B46, lavendustin A and RO3), quinines (e.g., quinine, quinacrine, quinidine), tetracyclines (e.g., doxycycline, tetracycline), aminoquinolones (e.g., amodiaquine, chloroquine, hydroxychloroquine, primaquine), biquanides (e.g., proguanil, chlorproquanil), cinchona alkaloids (e.g., cinchoine, cinchonidine), sulfonamides (e.g., sulfonamide, sulfadoxine, sulfamethoxypridazine), artemisinins (e.g., artemisinin, artemether, dihydroartemesinin, artesunate, artether), clindamycin, dapsone, atovaquone, lumefantrine, piperaquine, pyronaridine, atovaquone, mefloquine, pyrimethamine, halofantrine, and salts thereof. In certain embodiments, the anti-malarial agent is an artemisinin compound (e.g., artemisinin, artemether, dihydroartemesinin, artesunate, artether). In certain embodiments, the anti-malarial agent is artemisinin, artemether, dihydroartemesinin, artesunate, or artether. In certain embodiments, the anti-malarial agent is artemisinin. In certain embodiments, the anti-malarial agent is genistein.
In certain embodiments, the additional therapeutic agent is an anti-inflammatory agent. Exemplary anti-inflammatory agents include, but are not limited to TNF inhibitors (e.g., monoclonal antibodies such as infliximab, adalimumab, certolizumab pegol, and golimumab; a circulating receptor fusion protein such as etanercept; xanthine derivatives such as pentoxifylline; Bupropion); iron chelators (e.g., desferrioxamine); dexamethasone; intravenous immunoglobulin; curdlan sulfate; salts thereof; and CO gas. In certain embodiments, the anti-inflammatory agent is CO gas.
In certain embodiments, the additional therapeutic agent is an activator of pyruvate dehydrogenase, e.g., dicloroacetate (DCA), DCA has been shown to reduce hyperlactatemia and acidosis (e.g., increased blood acidity) of severe malaria (see, e.g., Krishna et al, Br. J. Clin. Pharmacol. (1996) 41:29-34).
In order that the invention described herein may be more fully understood, the following examples are set forth. It should be understood that these examples are for illustrative purposes only and are not to be construed as limiting this invention in any manner.
It has previously been shown that administration of CO by inhalation protects P. berghei ANKA infected C57BL/6 mice from developing ECM (see, e.g., Pamplona et al. Nat Med (2007) 13:703-710). The inventors questioned whether CO-RMs could mimic the protection conferred by CO inhalation in P. berghei ANKA infection. To this end, a known ruthenium CORM, Ru(CO)3Cl2, also referred to herein as CORM-2, was tested on different schedules of treatment and doses in P. berghei ANKA infected C57BL/6 mice (data not shown). As negative control, a CO-depleted analogue of CORM-2, [Ru(DMSO)4Cl2](also referred to herein as “Compound 2”) where all CO ligands of Ru(II) are replaced by DMSO ligands (
The inventors also tested the therapeutic effect of CORM-3, [Ru(CO)3Cl2(H2NCH2CO)2], a water-soluble compound using the ECM model. It was observed that the administration of CORM-3 at equimolar concentration to CORM-2, within the same schedule of treatment as CORM-2, protected mice from ECM in 50% (
A novel water soluble CO-RM, tricarbonyldichloro(methylthiogalactopyranoside) Ru(II) [Ru(CO)3Cl2(Gal-S-Me)](Compound 1), was synthesized through the reaction of CORM-2 with methylthiogalactopyranoside (Gal-S-Me) (
Tricarbonyldichloro(methylthiogalactopyranoside) Ru(II) [Ru(CO)3Cl2(Gal-S-Me)], also referred to herein as Compound 1, was prepared by reacting CORM-2 with methylthiogalactopyranoside (Gal-S-Me) as described herein (see
The hen egg white lysozyme (HEWL) assay was used to assess the reactivity of Compound 1 in the presence of proteins (see, e.g., Santos-Silva, T. et al. J Am Chem Soc (2011) 133, 1192-1195). This paper describes the interactions of CORM-3 with plasma proteins. CORM-3 reacts rapidily with proteins, losing chloride ion, glycinate, and one CO ligand. It was envisioned that Compound 1 could react with serum proteins in a similar manner as seen previously for CORM-3 and form CO-adducts from which CO may then be released and exert its protective effects. Indeed, Compound 1 in the presence of HEWL forms protein-RuII(CO)2 adducts but reacts slower than CORM-3 (see Materials and Methods, described herein, and
The CO donation capacity of Compound 1 by a deoxy-myoglobin (Mb) carbonylation assay was then evaluated (see, e.g., Clark et al., Am J Pathol (1992) 140:325-336). It was observed that Compound 1 transfers approximately 1 equivalent of CO to Mb after 15 minutes of incubation with deoxy-Mb, as seen for Ru tricarbonyl CORM-3 (see Materials and Methods, described herein). Altogether, these data demonstrate that Compound 1 is capable of transferring CO to the heme of Mb, reacts with proteins to form protein-RuII(CO)2 adducts, and preferably distributes to the liver.
The potential protective effect of Compound 1 was next evaluated in ECM. P. berghei ANKA-infected C57BL/6 mice were treated twice daily with Compound 1 between days 2 and 3 after infection. Compound 1 treatment protected 100% of P. berghei ANKA-infected C57BL/6 mice from developing ECM in contrast to infected control and Compound 2-treated mice that died with ECM symptoms between days 6 and 8 after infection (P<0.0001) (
The data led the inventors to wonder whether Compound 1 could have a direct anti-parasitic effect on P. berghei ANKA and P. falciparum parasites. To this end, the effect of Compound 1 and the anti-malarial chloroquine (CQ) was monitored on the in vitro replication of P. falciparum 3D7 isolate and P. berghei ANKA for 48 h and 24 h, respectively. Compound 1 showed IC50 values remarkably high when compared to CQ, approximately 5600 and 350-fold higher in P. falciparum 3D7 and P. berghei ANKA parasites, respectively (see
Altogether, the above results show that the therapeutic administration of Compound 1, while not having an anti-parasitic effect, has a significant impact on the overall outcome of the infection, as indicated by 100% survival of the infected Compound 1 treated mice (
It has been shown that HO-1 induction reduced CM incidence in P. berghei ANKA infected C57BL/6 mice (see, e.g., Pamplona et al., Nat Med (2007) 13:703-710). Compound 1 distributes preferentially to the liver, which is considered a mediator of systemic and local innate immunity and has been implicated in the regulation of genes that contribute to the control of inflammation, such as HO-1 (see, e.g., Nemeth et al., Semin Immunopathol (2009) 31:333-343). No signs of ruthenium are found in the brain. The inventors questioned whether Compound 1 could modulate the expression of HO-1 and thus contribute to the observed protection against ECM. Expression of HO-1 mRNA was significantly up-regulated in the liver of P. berghei ANKA infected Compound 1-treated C57BL/6 mice, 11.1±2.3 and 5.7±1.2 fold, when compared, respectively, to non-infected and infected Compound 2-treated mice (P<0.05) (
Blood-brain barrier (BBB) disruption is a hallmark of ECM and has been reported in human CM (see, e.g., Thumwood et al., Parasitology (1988) 96:579-589; Medana et al., Int J Parasitol (2006) 36:555-568). P. berghei ANKA-infected non-treated and Compound 2-treated C57BL/6 mice showed BBB disruption as measured by Evans blue accumulation in brain parenchyma, i.e. 4.3±0.65 and 6.7±1,5 fold increase, respectively, as compared to NI mice (P<0.01), whereas Compound 1-treated mice did not show any evidence of BBB disruption as the levels of Evans blue accumulation were similar to NI mice (
Compound 1 treatment also prevented the neuropathologic features associated with ECM (see, e.g., Pamplona et al., Nat Med (2007) 13:703-710); Neill et al., Parasitology (1992) 105:165-175). Brains from infected and Compound 2-treated P. berghei ANKA-infected mice showed evidence of microvascular congestion with pRBC and leukocytes and hemorrhagic foci. In contrast, Compound 1-treated infected mice showed less hemorrhages, and the vessels had lower accumulation of pRBC and leukocytes (
The pathogenesis of severe P. falciparum malaria is complex and results in a broad spectrum of disease manifestations, such as CM and ALI. The inventors next evaluated the protective effect of Compound 1 in a model of malaria-associated acute lung injury (M-AALI) (see, e.g., Epiphanio et al. PLoS Pathog (2010) 6:1-10). The M-AALI model, based on the infection of DBA-2 mice with P. berghei ANKA, is characterized by dyspnea, airway obstruction, hypoxemia, pulmonary exudate and elevated VEGF levels in plasma, followed by death between days 7 and 12 after infection. None of P. berghei ANKA-infected DBA/2 mice, treated twice daily with Compound 1 between days 2 and 4 after infection, developed M-AALI. In the control groups of infected mice non-treated and Compound 2-treated, 83% and 67% of the mice, respectively, died displaying M-AALI symptoms such as dyspnea, respiratory insufficiency (as first symptoms), and pulmonary exudate and high VEGF levels in the plasma analysed post-mortem (
The above data shows that treatment with Compound 1 protects P. berghei-infected mice from death caused by ECM and M-AALI when administered before symptoms of disease are observed. However, to be useful in humans, Compound 1 should show therapeutic activity after the onset of disease, either alone or in combination with anti-malarial drugs. Thus, the inventors decided to test Compound 1 as an adjunctive and adjuvant therapy during the acute phase of ECM. Artesunate (AS) is the primary treatment in severe malaria and is generally effective in controlling P. falciparum parasitemia and has been used previously to treat P. berghei ANKA infected mice (see, e.g., Vivas et al., Acta Trop (2008) 105:222-228; Bienvenu et al., Acta Trop (2008) 106:104-8; Sinclair et al., Cochrane Database Syst Rev 3, CD005967). Therefore, the inventors assessed the combination of Compound 1 and AS on parasite clearance and clinical recovery from ECM. Two AS and Compound 1 combinations were tested: (i) Adjunctive therapy: AS and Compound 1 were administered concomitantly for 2 days after the onset of CM followed by a 3-day treatment with Compound 1 alone, or (ii) Adjuvant therapy: AS was administered on the first 2 days after CM onset followed by Compound 1 administration for 3 more days.
The treatment with AS started when the infected mice (control) showed the initial stage of ECM (score of 1). All infected non-treated mice died of ECM by day 6 after infection (
The inventors have discovered a novel, water-soluble, CORM, tricarbonyldichloro (thiogalactopyranoside) Ru(II) (Compound 1), capable of transferring CO to heme proteins and that protects mice from death caused by severe malaria. The inventors have observed that the lipid-soluble CORM-2 could fully protect mice from death caused by ECM, while the water-soluble CORM-3 analogue was less active and could only protect 50% of the mice from ECM (see
This work also provides evidence that Compound 1 treatment in ECM model induces the expression of HO-1. It has previously been shown that the induction of HO-1 protects mice from developing ECM (see, e.g., Pamplona supra). Additionally, in a model of chronic intestinal inflammation it has been shown that CO could ameliorate chronic murine colitis through a HO-1-dependent pathway (see, e.g., Hegazi et al., J Exp Med (2005) 202:1703-1713). The data strongly suggest that HO-1 mediates a significant component of the anti-inflammatory action of Compound 1 in ECM, which is characterized not only by an exacerbated parasite-mediated inflammatory responses but also to pRBC, unparasitized RBCs sequestration in the microvasculature of the brain, and more recently by coagulopathy and microcirculation dysfunction (see, e.g., van der Heyde et al., Trends Parasitol (2006) 22:503-508).
Despite the introduction of new anti-malarial agents, such as artemisinin derivatives (e.g. artesunate), these drugs take at least 12-18 h to kill parasites (see, e.g., Mishra et al., Nat Rev Neurol (2009) 5:189-198). Deaths from severe malaria may occur within the first 24 h after hospital admission (see, e.g., Idro et al., Lancet Neurol (2005) 4:827-840). Thus, administration of adjunctive therapies in the first 24 h is critical to reduce mortality. Children who survive the acute episode of CM often have long-term cognitive (˜25%) and neurologic (1.1-4.4%) deficits (see, e.g., Trampuz et al., Crit Care (2003) 7:315-323; Idro supra). The use of adjunctive therapies that would reduce neurological injury may prove essential to reduce this burden. A series of adjunctive therapies such as anti-TNF-α agents, iron chelators (such as desferrioxamine) and dichloroacetate (stimulates pyruvate dehydrogenase and so reduces lactate) have been assessed in randomized clinical trials (reviewed in John et al., Expert Rev Anti Infect Ther (2010) 8:997-1008).
Remarkably, the present data demonstrates that Compound 1 is an effective adjuvant when in combination with an artemisinin anti-malarial agent (e.g., artesunate (AS)) for the treatment of malaria infection, e.g., ECM. Furthermore, treatment with Compound 1 protected mice from M-AALI, and significantly decreased the levels of VEGF in circulation. Therefore, Compound 1 may be an effective adjuvant agent in the treatment of M-AALI as well as inflammatory conditions such as ALI since the only treatments shown to improve survival and reduce mortality for patients with ALI have been supportive care strategies (see, e.g., Jain et al., Mayo Clin Proc (2006) 81:205-212).
In summary, the novel CO-RM, Compound 1, displays improved water solubility, is able to transfer CO to heme proteins and distributes in vivo with a moderate affinity for the liver. The bioactivity and key therapeutic features of Compound 1 are shown in two distinct models of severe malaria. Importantly, the data shows the use of this compound as a promising adjuvant therapy during the acute phase of cerebral malaria. Compound 1 fully protects mice against experimental CM (ECM) and acute lung injury (ALI). Compound 1 enables specific CO delivery in vivo without affecting oxygen transport by hemoglobin, the major limitation in CO inhalation therapy. The protective effect is CO-dependent and induces the expression of heme oxygenase-1, which contributes for the observed protection. Importantly, when in combination with the anti-malarial drug artesunate, Compound 1 is an effective adjuvant for ECM conferring protection after the onset of severe disease.
The present study further clarifies the anti-inflammatory and cytoprotective effects of a novel Ru tricarbonyl CO-RM in ECM and M-AALI models. The data highlights the therapeutic potential of Compound 1 in targeting pharmacologically the expression of HO-1 that plays a crucial cytoprotective, immunomodulatory and anti-inflammatory roles. The work clearly demonstrates that CO delivered from Compound 1 can induce similar protection as was seen with CO gas therapy, but without the toxic effects (elevated COHb levels) of CO inhalation. Altogether, this work represents an important pre-clinical proof-of-principle for CORMs as a new class of drugs to treat severe forms of malaria infection and establish a novel CO-RM with many important drug-like features relevant to other therapeutic applications.
For the in vivo studies, tricarbonyldichlororuthenium(II) dimer (CORM-2) and Artesunate (AS) were obtained from Sigma-Aldrich. CORM-3, fac-Ru(CO)3C1(NH2CH2COO) also referred to as fac-Ru(CO)3C1(glycinate), was synthesized as described previously (see, e.g., Clark et al., Am J Pathol (1992) 140:325-36), Compound 2 (Tetrakis(dimethylsulfoxide)dichlororuthenium(II)) was purchased from Strem Chemicals, Inc. β-D-thiogalactopyranoside was purchased from Carbosynth. Hen Egg White Lysozyme C (PDB code 3b61; UniProtKB/Swiss-Prot code P00698) (Calculated average isotopic mass=14305.1) was used as a model for the interaction with Ru(CO)3Cl2(Gal-S-Me) and CORM-3.
C57BL/6 and DBA-2 wild-type mice were purchase from Charles River Laboratories Internation Inc. (Barcelona, Spain) and housed in the pathogen-free facilities of the Instituto de Medicina Molecular. All protocols were approved by and conducted according to the Animal Care regulations of the Direcqao Geral de Veterinairia (Portugal).
Red blood cells infected with green fluorescent protein (GFP)-transgenic P. berghei ANKA and P. berghei ANKA was used to infect mice (see, e.g., Franke-Fayard et al. Mol Biochem Parasitol (2004) 137:23-33). Cryopreserved parasites were passed once through C57BL/6 or DBA-2 mice before being used to infect experimental animals. C57BL/6 or DBA-2, 6- to 8-wk-old mice (sex matched in each experiment) were infected by intra-peritoneal (i.p.) injection of 106 infected RBCs. The infected mice were monitored daily for clinical symptoms of experimental cerebral malaria (ECM) including hemi- or paraplegia, head deviation, tendency to roll over on stimulation, ataxia and convulsions, or ALI, including dyspnea. Mice showing severe signs of ECM at day 5, 6 or 7 post-infection (p.i.) and ALI between days 7 and 9 were sacrificed. Parasitemia was assessed by flow cytometry for mice infected with GFP-expressing P. berghei ANKA, using tail blood, as previously described (see, e.g., Pamplona et al., Nat Med (2007) 13:703-710). Mean parasitemia is expressed as percentage of infected red blood cells. For mice infected with non-GFP P. berghei parasitemia was assessed daily by microscopic counting of Giemsa-stained thin blood smears. Mean parasitemia is expressed as percentage of infected red blood cells. Survival is expressed as percentage.
In order to evaluate the clinical presentation of experimental cerebral malaria, a classification was used in clinical stages from 0 to 4 (see, e.g., Bienvenu et al., Acta Trop (2008) 106:104-8; Franklin et al., Proc Natl Acad Sci USA (2011) 108:3689-94). Briefly, stage 0 indicates no detectable clinical symptoms, stage 1, ruffled fur; stage 2, ruffled fur and unbalancing; stage 3, limb paralysis and respiratory distress and stage 4, convulsions, coma or death. The mice were clinically classified before and after the treatment to evaluate the clinical recovery.
CORM-2 (Sigma-Aldrich) and Compound 2 were solubilized using 10% dimethyl sulfoxide (DMSO; Sigma-Aldrich) in PBS. CORM-3 and Compound 1 were solubilized in PBS (lx). CORM-2 solution (20 mg/kg of body weight) was administered intravenously (i.v.) according to the chosen schedules. Compound 2, CORM-3 and Compound 1 were administered i.v. at equimolar concentrations relative to CORM-2 (36.7 mg/Kg). As vehicle control, we used a solution of 10% DMSO in PBS administered i.v. The concentrations of CORM-2 used in the present study were based on previous reports (see, e.g., Chen et al. Am. J. Pathol. (2009) 175:422-429; Sun et al., World. J. Gastroenterol. (2008) 14:547-553). Artesunate is presented as a powder of artesunic acid. Artesunate (AS) solution was prepared by dissolving 60 mg of anhydrous artesunic acid in 1 ml of sodium bicarbonate (5%) to form sodium artesunate and then diluted in 5 ml of NaCl (0.9%). An AS solution (i.p.) was administered at 40 mg/Kg/day, as described previously (see, e.g., Bienvenu, Acta Trop (2008) 106:104-108). The AS treatment was started when the infected non-treated mice presented the clinical stage 1 for experimental cerebral malaria.
Blood was collected from the tail of the mice to capillary tubes (VWR) with heparin (100 i.u./ml in PBS 1×; LEO Pharma Inc.), transferred into AVOXimeter 4000 cuvettes (ITC) where the levels of carboxyhemoglobin (COHb), oxyhemoglobin (02Hb) and methemoglobin (MetHb) were measured in a portable AVOXimeter 4000 CO-oximeter (ITC). Results are shown as mean percentage of total hemoglobin species in circulation.
CO was quantified in different tissues as previously described (see, e.g., Vreman et al., Anal Biochem (2005) 341:280-289). Briefly, CO was liberated as gas in a closed vial by adding 25 μL of water and 5 μL of sulfosalicylic acid (SSA, 30% [wt/vol]) to 30 μL of diluted sample after being homogenized. The vials were incubated on ice for at least 10 min before being analyzed. The gas in the headspace of the vials was analyzed quantitatively with a gas chromatograph (GC) equipped with a reducing-compound photometry detector (RCP detector) (Peak Laboratories, Mountain View, Calif.), which allows to quantify CO in gas at concentrations as low as 1-2 parts per billion (ppb). The amount of CO was calculated using a calibration curve prepared from CO standards. Briefly, blood was collected from the tail of the mice to capillary tubes (VWR) with heparin (100 i.u./ml in PBS 1×; LEO Pharma Inc.), transferred into AVOXimeter 4000 cuvettes (ITC) where the levels of carboxyhemoglobin (COHb), oxyhemoglobin (O2Hb) and methemoglobin (MetHb) were measured in a portable AVOXimeter 4000 CO-oximeter (ITC). Results are shown as mean percentage of total hemoglobin species in circulation.
The tissue samples were weighed and dried at 80° C. overnight followed by 2 or more hours at 120° C. The dried tissues were then digested by the addition of 2 mL of tetraethylammonium hydroxide solution (20% wt in water) (Sigma-Aldrich (St. Louis, Mo., USA)) for 24 hours. After the complete tissue digestion, 1 mL of water was added. The Ru content was analyzed by an inductively coupled plasma-atomic emission spectrometer (ICP-AES) (model Ultima-Horiba Jobin Yvon, Longjumeau, France) using an external Ru standard method.
For evaluation of histological features, mice were deeply anesthetized until cessation of breathing when infected control mice presented signs of ECM or ALI. The livers, lungs, and brains were removed and fixed in 10% buffered formalin for 24-72 h. Four-micron sections were cut from paraffin-embedded tissues and stained with hematoxylin and eosin according to standard procedures. Histological analyses were performed on a Leica microscope DM 2500 (Leica Microsystems).
Mouse VEGF in plasma samples was determined using a commercial ELISA kit (R&D Systems) following the manufacturer's instructions. The group classification was only performed by the end of each experiment after determining the cause of death.
Quantitative Real-Time Reverse Transcription PCR (qRT-PCR)
Mice were sacrificed, when infected control mice presented signs of ECM, and perfused intracardially with PBS to remove circulating RBC and leukocytes from the organs. RNA was isolated from brains, livers and lungs using Trizol Reagent (Invitrogen, Life technologies), according to the manufacturer's recommendation. The synthesis of the first-strand cDNA from the RNA templates was carried out using the Transcriptor First Strand cDNA Synthesis Kit (Roche). RT-PCR reactions were performed in the presence of SYBER Green (SYBER Green PCR master mix, Applied Biosystems) on an ABI PRISM 7500Fast (Applied Biosystem). Oligonucleotides used for the specific amplification of genes include:
The relative changes in gene expression between experimental and control groups were calculated by the Pfaffl method using hprt as internal control gene.
For samples in which n>5, statistical analyses were performed using the Student's t-test and for n<5, statistical analyses were performed using Mann-Whitney U-test.
Survival curves were compared using the Log-rank test and the Gehan-Breslow-Wilcoxon test. P<0.05 was considered significant.
The Mb assay was performed as described in Clark et al., Circ. Res. (2003) 93:2-8. A stock solution of Myoglobin (Mb) from equine skeletal muscle was prepared by dissolving the protein in PBS7.4. From this solution aliquots were taken to a cuvette (final concentration between ca. 60 μM) and Na2S2O4 in PBS, pH 7.4 (10 mg/mL solution; 0.1% final concentration) was added to convert met-Mb into deoxy-Mb. The reactions were done by mixing in the same cuvette and by this order, the Mb stock solution, the Na2S2O4 solution, a calculated amount of a solution of Compound I and adding PBS to obtain the desired final volume. Before adding the Compound 1 solution a control spectrum was always acquired to see if the protein had been properly reduced with sodium dithionite. Two controls were done in duplicate, the negative control (0% CO-Mb), a deoxy-Mb solution and the positive control (100% CO-Mb), obtained by bubbling pure CO gas into the deoxy-Mb solution for 10-15 min. The experimental spectrum was fitted as a weighted sum of the deoxy-Mb and the CO-Mb spectra. Solver function in MS Excel was used to calculate the percentage of CO-Mb by deconvolution of the spectra using both positive and negative standards as controls. The absorbance spectrum was converted into a percentage of CO-Mb and the amount of CO liberated was calculated as molar equivalents of CO based on the initial concentration of Compound I (see
Liquid chromatography-mass spectrometry (LC-MS) was performed on a Micromass Quattro API instrument (ESI-TOF-MS) coupled to a Waters Alliance 2795 HPLC using a MassPREP On-Line Desalting Cartridge. Water:acetonitrile, 95:5 (solvent A) and acetonitrile (solvent B), with solvent A containing 0.1% formic acid, were used as the mobile phase at a flow rate of 0.3 mL min−1. The gradient was programmed as follows: 95% A (0.5 min isocratic) to 80% B after 1.5 min then isocratic for 1 min. After 4 min to 95% A and then isocratic for 6 min. The electrospray source of LCT was operated with a capillary voltage of 3.0 kV and a cone voltage of 20 V. Nitrogen was used as the nebulizer and desolvation gas at a total flow of 600 L hr−1. Proteins typically elute between 2 and 4 minutes using this method. Spectra were calibrated using a calibration curve constructed from a minimum of 17 matched peaks from the multiply charged ion series of equine myoglobin, which was also obtained at a cone voltage of 20 V. Total mass spectra were reconstructed from the ion series using the MaxEnt algorithm preinstalled on MassLynx software (v. 4.0 from Waters) according to manufacturer s instructions.
Hen Egg White Lysozyme C (PDB code 3b61; UniProtKB/Swiss-Prot code P00698). The amino acid sequence of the egg white lysozyme employed is described in Canfield et al., J. Biol. Chem. (1963) 238:2698-2707 (1963). Quantitative determination of lysozyme-ligand binding in the solution and gas phases by electrospray ionisation mass spectrometry follows Veros et al., Rapid Commun. Mass Spectrom. (2007) 21:3505-3510). All manipulations were carried out at room temperature. Lyophilized lysozyme (2 mg, 0.14 mol) was dissolved in 1 mL of water in a 1.5 mL plastic tube. The sample was split into 150 μL aliquots (0.3 mg, 0.02 μmol) and stored at 4° C. A 50 μL aliquot was analyzed by LC-MS (calculated average isotopic mass of the egg white lysozyme=14305.1).
Santos-Silva and co-workers previously describe CORM-3's reactivity towards proteins and formation of a Ru(II) dicarbonyl-lysozyme complex (see, e.g., Santos-Silva et al., J. Am. Chem. Soc. (2011) 133:1192-1195). A solution of CORM-3 or Compound 1 (10 equivalents, 0.2 μmol) in water (50 μL) (at this concentration the pH of the solution containing CORM-3 is 3.0 and Compound 1 4.0) was added by micropipette to the lysozyme solution (150 μL) and the reaction mixture was vortexed periodically over 1 minute. The tube was left to shake for 1 hour. 50 μL aliquots were collected and analyzed by LC-MS over the reaction time (10 minutes and 1 hour). Two protein species were detected, one corresponding to the mass of native lysozyme (14305=calculated mass) and another corresponding to the addition of a Ru(CO)2+ unit (m/z 157.9) to the mass of lysozyme (14463=calculated mass). After 1 hour, small molecules were removed from the reaction mixture by loading the sample onto a PD10 desalting column (GE Healthcare) previously equilibrated with 10 column volumes of deionized water and eluting with 3.50 mL of deionized water. The collected sample (now diluted to 0.57 mg/mL) was analyzed by LC-MS at ten minutes and 1 hour at room temperature, see, e.g., ESI-MS of lysozyme when incubated with CORM-3 at 10 minutes (
Dichlorotricarbonylruthenium (II) dimer (0.52 g, 1.02 mmol) was dissolved in anhydrous methanol (30 mL) and transferred via cannula to a solution of β-D-thiogalactopyranoside (0.42 g, 2.04 mmol) in anhydrous methanol (30 mL). A slightly pale yellow clear solution was formed and stirred for 24 hours at room temperature under nitrogen atmosphere. The solution was concentrated and diethyl ether was added. The white precipitate was filtered, washed with diethyl ether (3×30 mL), and dried. The residue was partially dissolved in diethyl ether and frozen in liquid nitrogen. The solid was crushed and stirred. A white powder formed and was filtered and dried to give tricarbonylchloro(thiogalactopyranoside) ruthenium(II) (348 mg, 73%); the compound was stored under nitrogen; νmax (KBr disc cm−1) 2139 (s, CEO) 2060 (s, CEO) cm−1; δH (400 MHz, D2O) 2.23 (3H, s, CH3), 3.58-75 (6H, m), 4.38 (1H, d, J 9.2 Hz, H-1); Found: C, 25.81%; H, 2.94%, S,6.80%. C10H14Cl2O8RuS Requires: C, 25.76%; H, 3.03%; S, 6.88%.
This application refers to various issued patents, published patent applications, journal articles, books, manuals, and other publications, all of which are incorporated herein by reference.
The foregoing has been a description of certain non-limiting embodiments of the invention. Those of ordinary skill in the art will appreciate that various changes and modifications to this description may be made without departing from the spirit or scope of the present invention, as defined in the following claims.
The present application is a continuation of and claims priority under 35 U.S.C. §120 to U.S. patent application, U.S. Ser. No. 14/234,024, filed Apr. 10, 2014, which is a national stage filing under 35 U.S.C. §371 of International PCT Application, PCT/US2012/047661, filed Jul. 20, 2012, which claims priority under 35 U.S.C. §119(e) to U.S. provisional application, U.S. Ser. No. 61/510,136, filed Jul. 21, 2011, the entire contents of each of which are incorporated herein by reference.
| Number | Date | Country | |
|---|---|---|---|
| 61510136 | Jul 2011 | US |
| Number | Date | Country | |
|---|---|---|---|
| Parent | 14234024 | Apr 2014 | US |
| Child | 14711113 | US |
