Selections of genes and methods of using the same for diagnosis and for targeting the therapy of select cancers

FIELD OF THE INVENTION

[0002] The invention relates generally to selections of genes expressed in a cancer cell that function to characterize a cancer, and methods of using the same for diagnosis and for targeting the therapy of select cancers. The invention also relates generally to the use of supervised pattern recognition methods to classify and diagnose disease. More specifically, the invention relates to the use of supervised pattern recognition methods, such as artificial neural networks for the classification, diagnosis, prognosis and prediction of disease using high dimensional data, such as gene expression profiling data.

BACKGROUND OF THE INVENTION

[0003] Disease is generally diagnosed based on a myriad of factors, both objective and subjective, including but not limited to symptoms, laboratory test values, demographic factors and environmental factors. Diagnosis relies on a clinician such as a physician or a veterinarian being able to identify and evaluate the relevant factors. Often this task can be difficult, and becomes exceedingly more so as the number of factors to be considered increases.

[0004] An example of a disease whose diagnosis is difficult is tumors. Tumors are currently diagnosed on the basis of clinical presentation, routine histology, immunohistochemistry and electron microscopy. However the histological appearance may not reveal the genetic aberrations or underlying biologic processes that contribute to the malignancy. Monitoring global gene expression levels using DNA microarrays would provide an additional tool for elucidating tumor biology as well as the potential for molecular diagnostic classification of cancers. Several studies have demonstrated that gene expression profiling using DNA microarrays is able to classify tumors with a high accuracy, and discover new cancer classes.

[0005] A specific type of tumors which could benefit is the small, round blue cell tumors (SRBCTs) of childhood as a model. SRBCTs include, neuroblastoma (NB), rhabdomyosarcoma (RMS), Burkitt's lymphoma (also called Burkitt's) (BL) and the Ewing family of tumors (EWS), are so named because of their similar appearance on routine histology. However, accurate diagnosis of SRBCTs is essential because the treatment options, responses to therapy, and prognoses vary widely depending on the diagnosis. As their name implies, these cancers are difficult to distinguish by light microscopy, and currently no single test can precisely distinguish these cancers.

[0006] In clinical practice, several techniques are used for diagnosis, including immunohistochemistry, cytogenetics, interphase fluorescence in situ hybridization and reverse transcription (RT)-PCR. Immunohistochemistry allows the detection of protein expression, but it can only examine one protein at a time. Molecular techniques such as RT-PCR are used increasingly for diagnostic confirmation following the discovery of tumor-specific translocations such as EWS-FLI1; t(11;22)(q24;q12) in EWS, and the PAX3-FKHR; t(2;13)(q35;q14) in alveolar rhabdomyosarcoma (ARMS). However, molecular markers do not always provide a definitive diagnosis, as on occasion there is failure to detect the classical translocations, due to either technical difficulties or the presence of variant translocations.

[0007] An example of a diagnostic method replete with such problems is the diagnostic method for Ewing sarcoma. Ewing sarcoma is diagnosed by immunohistochemical evidence of MIC2 expression and lack of expression of the leukocyte common antigen CD45 (excluding lymphoma), muscle-specific actin or myogenin (excluding RMS). However, reliance on detection of MIC2 alone can lead to incorrect diagnosis as MIC2 expression occurs occasionally in other tumor types including RMS and BL.

[0008] One objective factor that can, in certain circumstances, be entirely predictive of a diseased state is the genetic makeup of the individual. Genetic makeup of an individual cell can also be considered in terms of the level of expression of the genes of that individual cell through gene expression data.

[0009] DNA microarray technology is a recently developed high throughput technology for monitoring gene expression at the transcription level. Its use is akin to performing tens of thousands of northern blots simultaneously, and has the potential for parallel integration of the expression levels of an entire genome. A DNA microarray consists of DNA probes immobilized on a solid support such as a glass microscope slide. The DNA probes can be double stranded cDNA or short (25mers) or long (50-70mers) oligonucleotides of known sequences. An ideal DNA microarray should be able to interrogate all of the genes expressed in an organism.

[0010] In DNA microarrays using cDNA, the probes are PCR amplified from plasmid cDNA clones that have been purified and robotically printed onto coated glass slides. DNA microarrays using oligonucleotide have an advantage over cDNA microarrays because physical clones are not necessary. The oligonucleotides can either be previously synthesized and printed on glass slides, or can be synthesized directly on the surface of silicon or glass slides. Several print-ready oligonucleotide (60-70 mers) sets are commercially available for human, mouse and other organisms (http://www.cgen.com, http://www.operon.com).

[0011] Another technique for fabricating oligonucleotides microarrays chemically synthesizes the oligonucleotides (25 mers) on a silicon surface using photolithography techniques. (Affymetrix Inc., Santa Clara, Calif.). Originally such arrays were designed to detect single-nucleotide mutations, but now have applications for gene expression profiling studies. Yet another technique delivers single nucleic acids, which ultimately form longer oligonucleotides (60 mers), by ink-jet onto glass surfaces.

[0012] One method of utilizing gene expression data from microarrays is given by Tusher et al., PNAS 98(9) p. 5116-21, April, 2001. The method of Tusher et al. is a statistical method titled Significance Analysis of Microarrays (“SAM”). The general approach in SAM is based on commonly used statistical tests, t-tests specifically, to find genes that discriminate between two classes in a gene-by-gene fashion. SAM uses replication of experiments to assign a significance to the discriminating genes in terms of a false discover rate. SAM therefore offers a method of choosing particular genes from a set of gene expression data, but does not offer a diagnosis based on those genes.

[0013] DNA microarrays would be an invaluable tool for disease diagnosis. Gene-expression profiling using DNA microarrays permits a simultaneous analysis of multiple markers, and can be used for example to categorize cancers into subgroups. The only limitation associated with the use of DNA microarrays is the vast amount of data generated thereby. A method that would allow for the easy and automated use of DNA microarray data in disease diagnosis is therefore desirable. Despite the many statistical techniques to analyze gene-expression data, none so far has been rigorously tested for their ability to accurately distinguish diseases belonging to several diagnostic categories. Such methods have also not been used to extract the genes or features that are the most important for the classification performance. Such genes would also generally be those that are of use to biologists and physicians as offering avenues to research in investigating cures.

[0014] However, these other methods have not been used to extract the genes or features that are most important for the classification performance and which also will be of interest to cancer biologists.

[0015] Therefore, there remains a need for a method of using gene expression data to diagnose, predict, or prognosticate about a disease condition.

SUMMARY OF THE INVENTION

[0016] In accordance with one embodiment of the invention, there is provided a selection of genes, expressed in a cancer cell, that functions to characterize the cancer when the expression of a gene selection from the cancer cell is compared to the expression of an identical selection of genes from a noncancerous cell or an identical selection of genes from a different type of cancer cell.

[0017] Another embodiment of the invention includes a method of targeting a product of at least one of the genes in table 5 (below) that includes administering a therapeutic agent. Another embodiment of the invention includes a method of targeting a product of at least one of the genes in tables 2, 6, 7, 8, or 9 (below) that includes administering a therapeutic agent having an effect on said gene product. Yet another embodiment of the invention includes a method of targeting a product of at least one of the genes in table 10 (below) that includes administering a therapeutic agent having an effect on said gene product.

[0018] Another embodiment of the invention includes a method of using a selection of genes expressed in a cell having a particular type of cancer, wherein the gene selection functions to characterize the particular type of cancer when the expression of the gene selection from the cell is compared to the expression of an identical selection of genes from a cell without that particular type of cancer for diagnosing the particular type of cancer. Devices for carrying out the above methods of the invention are also included within the scope of the invention.

[0019] Another embodiment of the invention provides a method of diagnosing, predicting, and/or prognosticating about a disease including obtaining experimental data, wherein the experimental data includes high dimensional data, filtering noise from the data, reducing the dimensionality of the data by using one or more methods of analysis, training a supervised pattern recognition and/or classification method, ranking individual data from the overall data based on the relevance of the individual data to the diagnosis, prediction, prognosis or classification, choosing multiple individual data members, wherein the choice is based on the relative ranking of the individual data, and using the chosen data to determine if an unknown set of experimental data indicates a particular diseased condition, prognosis, prediction, or classification.

[0020] The invention offers a method of diagnostic classification of cancers from their gene-expression signatures and also identifies the genes that contributed to this classification. One embodiment of the method diagnoses SRBCTs of childhood, which occasionally present diagnostic difficulties.

[0021] The invention also offers a method of diagnosing, predicting, and/or prognosticating about SRBCTs including obtaining gene expression data, filtering noise from the gene expression data, reducing the dimensionality of the data by using principal component analysis (PCA), training an ANN, ranking the individual genes from the gene expression data, choosing multiple genes from the gene expression data, wherein the choice is based on the relative ranking of the individual genes and using the chosen genes to determine if an unknown set of gene expression data indicates a particular diseased condition, prognosis, and/or a prediction.

[0022] Methods of the invention can be utilized in a number of different applications. For example, diagnostic chips can be fabricated based on the identification of the diagnostic genes. Such chips would be very useful in clinical settings, as it would allow clinicians to diagnose cancers from a relatively small set of genes instead of purchasing entire gene sets.

[0023] Methods of the invention can also be used to define which patients with the same types of cancers are likely to respond to treatment. This would allow a physician to intensify treatment for those with a more negative prognosis based on their gene expression profiles as detected utilizing a method of the invention.

[0024] Methods of the invention can also be used for identifying pharmaceutical targets. Pharmaceutical companies can utilize methods of the invention to determine which genes to target in efforts to target specific diseases.

[0025] Methods of the invention can also be utilized as a research tool for analyzing all types of gene expression data including cDNA and oligonucleotide microarray data.

[0026] Methods of the invention can also be utilized to identify and rank, by importance, the genes that contribute to a diagnosis. A minimal set of genes that can correctly classify and identify diagnostic categories can also be determined using methods of the invention.

[0027] Methods of the invention identify the most significant genes, by calculating the sensitivity of the classification to a change in the expression level of each gene. A list of genes, ranked by their significance to the classification, is produced thereby. In an embodiment of the invention utilized for classifying SRBCTs the most important 96 genes reduced the misclassifications to zero. This allows for cost effective fabrication of SRBCT subarrays for diagnostic use. When a method of the invention used the 96 genes on 25 unknown samples, all 20 samples of SRBCTs and 5 non-SRBCTs were correctly classified.

[0028] One embodiment of the invention calibrates ANN models on the expression profiles of 63 SRBCTs of 4 diagnostic categories. Preferred embodiments of the invention utilize linear (that is no hidden layers) ANN models because of the high performance achieved. Methods of the invention may utilize other linear methods as well, and methods of the invention can easily accommodate nonlinear features of expression data if required. Hidden layers will be utilized for non linear data. Preferably, both tumor samples and cell line samples are used in order to compensate for heterogeneity within unknown samples (which contain both malignant and stromal cells) based on possible artifacts due to growth of cell lines in tissue culture.

[0029] Data from such samples is complementary, because tumor tissue, though complex, provides a gene-expression pattern representative of tumor growth in vivo, while cell lines contain a uniform malignant population without stromal contamination. Despite using only neuroblastoma (NB) cell lines for calibrating the ANN models, all four NB tumors among the test samples were correctly diagnosed with high confidence. This not only demonstrates the high similarity of NB cell lines to the tumors of origin, but also validates the use of cell lines for ANN calibration. One embodiment of a method of the invention accurately classified all 63 training SRBCTs and showed no evidence of over-training, thereby demonstrating the robustness of this method.

BRIEF DESCRIPTION OF THE FIGURES

[0030]
FIG. 1 illustrates a process flow for a method to classify and diagnose diseases using artificial neural networks according to one embodiment of the invention.

[0031]
FIG. 2 illustrates a general purpose computing system utilized as part of an artificial neural network according to another embodiment of the invention.

[0032]
FIG. 3 illustrates a set of processing modules making up an embodiment of an artificial neural network according to the invention.

[0033]
FIG. 4 represents a plot of the average classification error per sample (using a summed square error function) plotted during the training iterations (epochs) for both the training and validation samples.

[0034]
FIG. 5 represents a plot of the average number of misclassified samples for all 3750 models plotted against an increasing number of used genes.

[0035]
FIG. 6 represents a plot of the distance from the samples committee vote to the ideal vote for that diagnostic category.

[0036]
FIG. 7 represents two projections of the MDS plot of the training samples.

[0037]
FIG. 8 represents a hierarchical clustering of the samples and genes, where each row represents one of the 96 cDNA clones, and each column represents a separate sample.

[0038]
FIG. 9 represents a hierarchical clustering dendrogram of the samples in FIG. 8.

DETAILED DESCRIPTION OF THE PREFERRED EMBODIMENTS

[0039] The invention is a method of classifying, diagnosing, prognosticating about, and predicting disease conditions or other biological states using supervised pattern recognition methods to analyze high dimensional data.

[0040] One embodiment of the invention is illustrated in FIG. 1. This process flow describes an embodiment of the method that includes obtaining experimental data 101, filtering the data 102, reducing the dimensionality of the data 103, setting up a validation method 115, training a supervised pattern recognition method 111, validating the outcome of the supervised pattern recognition method 112, and once the supervised pattern recognition method is validated, ranking the data based on the outcome of the supervised pattern recognition method 113. Further detail and more specific embodiments of methods of the invention are described below.

[0041] Any diagnostic categories can be diagnosed using the technology described here. It includes distinguishing patients with multiple sclerosis, rheumatoid arthritis, and other inflammatory or autoimmune diseases. It may also diagnose other systemic diseases based on gene expression profiles of white cells, including infections with particular organisms, cancer, or myocardial infarctions.

[0042] Obtaining Experimental Data

[0043] The first step in methods of the invention is to obtain experimental data. Experimental data utilized in methods of the invention is high dimensional data. High dimensional data is data that has at least hundreds of individual pieces of information associated with one sample. An example of high dimensional data useful in methods of the invention is gene expression data. Gene expression data is high dimensional data because each sample or person has a large number of gene expression levels. Generally speaking, gene expression data generally has thousands of gene expression levels for each sample. Other examples of high dimensional data useful in the invention include but are not limited to protein arrays and protein chips, cell array based expression analysis, analysis of patterns of single nucleotide polymorphisms in disease conditions, and comparative genomic hybridization on methaphase, BAC genomic, cDNA and oligonucleotide arrays.

[0044] Preferably, the gene expression data is obtained through use of DNA microarray technology. DNA microarrays are preferred as a source of data because they generally offer a more complete picture of the interactions of a large number of genes with a limited number, or even one experiment. An example of a general description of how gene expression data can be obtained by using cDNA microarray technology is given below.

[0045] DNA microarrays, although a relatively new technology, have already been saddled with a number of different names, biochip, DNA chip, gene chip, genome chip, cDNA microarray, and gene array. The use of any of these terms herein refers generally to DNA microarrays. The underlying principle of DNA microarrays is base pairing or hybridization i.e., A-T and G-C for DNA, and A-U and G-C for RNA.

[0046] DNA microarrays provide a medium for matching known and unknown DNA samples based on the base pairings given above. DNA microarrays can either be fabricated by high-speed robotics or can be fabricated in a laboratory setting. They are generally patterned on glass, but can also be fabricated on nylon substrates. Microarrays generally have sample spot sizes of less than 200 μm diameter, and generally contain thousands of DNA spots on one microarray.

[0047] One method of fabricating cDNA microarrays begins by first producing gene-specific DNA by polymerase chain reaction (PCR) amplification of purified template plasmid DNAs from cloned expressed sequence tags (ESTs). The PCR product is then purified, resuspended and printed onto a substrate. DNA microarrays are also commercially available from a number of sources, including but not limited to Affymetric, Inc. (Santa Clara, Calif.), Agilent Technologies (Palo Alto, Calif.), and Research Genetics (Huntsville, Ala.).

[0048] One general procedure for a cDNA microarray experiment begins by preparing DNA samples and arraying them (either with an arraying robot, or by hand), to form a DNA microarray. Next, the RNA samples are extracted from the cells of interest, purified, reverse transcribed into cDNA and differentially fluorescently labeled to create probes. Then, the fluorescently labeled cDNA probes are hybridized to the cDNA microarray. If a probe contains a cDNA whose sequence is complementary to the DNA on a given spot, the cDNA probe will hybridize to that spot. After the cDNA probes are hybridized to the array, and any loose probe has been washed away, the microarray is imaged to determine how much of each probe is hybridized to each spot. This indicates how much of each gene from the microarray is expressed in the two samples. If the amount of starting material is small, for example from needle biopsies, the RNA can first be subject to amplification by modified Eberwine methods as described by Gelder et al. (Amplified RNA synthesized from limited quantities of heterogeneous cDNA.Proc Natl Acad Sci USA 1990 March; 87(5):1663-7).The experimental high dimensional data, preferably obtained from gene expression experiments, preferably performed using cDNA microarrays, is then further analyzed by a method of the invention.

[0049] Filtering the Data

[0050] The next step in a method of the invention is filtering the data 102 to remove individual pieces of data that are deemed undesirable. This filtering step functions to eliminate weak and/or problematic data from further use in the method. Accomplishment of the step of filtering depends greatly on the type of high dimensional data utilized. Any method known to those of ordinary skill in the art can be used to eliminate data determined to be undesirable.

[0051] One basis for carrying out this filtering, if a DNA microarray is being utilized for obtaining the high dimensional data, is the intensity of the fluorescence from the individual microarray spots. This basis of omitting data is based on failure or error in the imaging of the specific spots. A preferred method of performing initial data filtering on cDNA microarray data to remove those spots where imaging was a problem is to utilize the intensity of the various spots and utilize only those spots that have an intensity over a certain threshold value. Other methods of filtering DNA microarray data include but are not limited to eliminating spots in which the number of pixels represented is less than a threshold defined by the user, eliminating spots in which the standard deviation of the signal on the spots is too large, as defined by the user, eliminating spots in which the background intensity of a single spot is too high, or any combination thereof. In addition quality values based on intensity, can be assigned to each spot, standard deviation of intensity, background and/or size of each spot, then a spot could be eliminated if its quality value falls below a threshold as defined by the user.

[0052] Reducing the Dimensionality of the Data

[0053] The next step in methods of the invention is reducing the dimensionality of the data 103. The number of samples needed to calibrate a classifier with good predictive ability, depends critically on the number of features used in the design of the classifier. In the case of high-dimensional data, such as microarray data, where the number of samples is much smaller than the number of individual pieces of data there exists a large risk of over-fitting. There are two different solutions to this problem. First, the calibration process can be carefully monitored using a cross-validation scheme to avoid over-fitting (see below). Second, the dimension of the data can be reduced, either by using a dimensional reduction algorithm or by selecting a smaller set of data for input to the supervised pattern recognition method. Dimensionality reduction allows the number of parameters representing each sample to be reduced. This allows for the design of a classifier that has less risk of over-fitting, thereby increasing its predictive ability. Examples of methods of reducing the dimensionality of the data include but are not limited to principal component analysis (PCA), weighted gene analysis, t-test, rank based Wilcoxon or Mann-Whitney tests, signal-to-noise statistic, Fisher's discriminant analysis, or ANOVA tests.

[0054] In a preferred embodiment of the invention, PCA is used to reduce the dimensionality of the data.

[0055] In the case of PCA on gene expression data, reduction of the dimensionality is achieved by rotating gene expression space, such that the variance of the expression is dominated by as few linear combinations of genes as possible. Even though the formal dimension of the problem is given by the number of individual data points, the effective dimension is just one less than the number of samples. Hence the eigenvalue problem underlying PCA can be solved without diagonalizing 2308×2308 matrices by using singular value decomposition. Thus each sample is represented by 88 numbers, which are the results of projections of the data using the PCA eigenvectors.

[0056] A potential risk when using PCA on relatively few samples is that components might be singled out due to strong noise in the data. It could be argued that the outputs (labels) should be included in the dimensional reduction, using e.g. the Partial Least Squares (PLS) algorithm, in order to promote components with strong relevance for the output. However, based on explorations with similar data sets, this is not optimal; bias is introduced and implicitly “over-trains” from the outset by including the outputs in the procedure.

[0057] Setting up a Validation Method for the Supervised Pattern Recognition Method

[0058] Once the data has been filtered 102 and its dimensionality reduced 103, a validation method is set up for monitoring and validating the training of the supervised pattern recognition method 115. Any method commonly used by those of skill in the art for validating the training of a supervised pattern recognition method can be used.

[0059] In one embodiment, the first step in setting us a validation method is to randomly divide the data into three groups of data, 105, 106, and 107. Then, one of those groups is chosen as a validation group 108. The first two of the groups 105 and 106 are combined into a training group 109, which is used to train the supervised pattern recognition method 111 and the third group 107 is used to validate the performance of the supervised pattern recognition method 111, once trained, and is called a validation group 110.

[0060] In this specific preferred embodiment, the 3-fold cross validation procedure (steps 104 through 110) is performed on all of the samples. A data group having 63 samples is given as an example. The 63 known (labeled) samples are randomly shuffled 104 and split into 3 equally sized groups (105, 106, and 107). The supervised pattern recognition method 111 is then calibrated as discussed below using the training group 109. The third group, a validation group 110, is reserved for testing predictions. Comparisons with the known answers refer to the results from the validation group 110 (i.e. when using a model, the samples used for training the model are never used in predictions). This procedure is repeated 3 times, each time with a different group used for validation. The random shuffling 104 is done about 100 to 10000 times. For each shuffling, one supervised pattern recognition method 111 model is generated. Thus, in total each sample belongs to a validation group 110, 1250 times and 3750 supervised pattern recognition methods 111 have been calibrated.

[0061] Training the Supervised Pattern Recognition Method

[0062] The supervised pattern recognition method 111 is then trained. The specific method of training the supervised pattern recognition method 111 is dependent on the specific form that the supervised pattern recognition method 111 takes. The choice of the supervised pattern recognition method 111 and the training thereof is well within one of skill in the art, having read this specification.

[0063] One example of a supervised pattern recognition method is an artificial neural network (ANN). ANNs are computer-based algorithms that are modeled on the structure and behavior of neurons in the human brain and can be trained to recognize and categorize complex patterns. Pattern recognition is achieved by adjusting parameters of the ANN by a process of error minimization through learning from experience. They can be calibrated using any type of input data, such as gene-expression levels generated by cDNA microarrays, and the output can be grouped into any given number of categories. ANNs have been recently applied to clinical problems such as diagnosing myocardial infarcts and arrhythmias from electrocardiograms and interpreting radiographs and magnetic resonance images. However, ANNs have not been used to decipher gene-expression signatures of SRBCTs or for diagnostic classification.

[0064] In embodiments where an artificial neural network (ANN) is employed as the supervised pattern recognition method 111, calibration is preferably performed using JETNET (C. Peterson, T. Roegnvaldsson and L. Loennblad, “JETNET 3.0—A versatile artificial neural network package,” Computer Physics Communications 81, 185-220 (1994)). Preferably, the software is used with a learning rate 1-0.7, momentum coefficient p=0.3 and the learning rate is decreased with a factor 0.99 after each iteration. Initial weight values are chosen randomly from [−r, r], where r=0.1/maxi Fi and the “fanin” Fi is the number of nodes connecting to node i. The calibration is performed using a training set and it is monitored both for the training set and a validation set, which is not subject to calibration (see below). The weight values are updated after every 10 samples and the calibration is terminated after 100 passes (epochs) through the entire training set. In one embodiment of a method of the invention, the resulting parameters for the completed training of a supervised pattern recognition method 111 defines a “model”.

[0065] In preferred embodiments, due to the limited amount of calibration data and the fact that four output nodes are needed (Ewing's sarcoma (EWS), Burkitt's lymphoma (BL), neuroblastoma (NB) and rhabdomyo sarcoma (RMS)), linear perceptrons (LP) with 10 input nodes representing the PCA components described above are utilized. In other words, the supervised pattern recognition method 111 generally contains 44 parameters including four threshold units. Since 10 components could be used without risking “over-training” the optimization of the number of components to a smaller number is generally not necessary.

[0066] The possibility of using all the PCA components as inputs followed by a subsequent pruning of weights to avoid “over-fitting” is also one alternative. This resulted in the dominant 4-8 PCA components (depending on the composition of the training set 107) being the surviving inputs. Generally, the less dominant PCA components contain variance not related to separating the four cancers, but rather to, for example, experimental conditions (noise) or variance related to sub-groupings within a cancer type.

[0067] Verifying the Outcome of the Supervised Pattern Recognition Method

[0068] Once the supervised pattern recognition method 111 is trained, the next step is to determine whether the validation of the supervised pattern recognition method 111 is successful 112. This step determines whether the supervised pattern recognition method 111 adequately predicted the results for the validation data set 110 using any number of performance measurements and error measurements.

[0069] Any method known to those of ordinary skill in the art can be utilized to evaluate the performance of the training of the supervised pattern recognition method 111. Generally speaking, the performance is evaluated by comparison with some predetermined level of correct predictions that the user has determined is acceptable.

[0070] If the performance of the supervised pattern recognition method 111 is sufficiently poor, and a measure of error is greater than an allowable threshold, the processing may return to module 103 where the dimensionality of the data is reduced in a different manner and the entire training and validation process is repeated.

[0071] Ranking the Data

[0072] Once module 112 determines that the network 111 has been adequately trained, the processing proceeds to rank the output of the supervised pattern recognition method 113.

[0073] The outcome of the supervised pattern recognition method 111 can be looked at either independently or in a compiled form. Each supervised pattern recognition method 111 gives a number between 0 (not this disease type) and 1 (this disease type) as an output for each disease type. If the predictions are viewed independently, the maximal output is forced to 1 while the other outputs are forced to 0. Then it is determined how many of the predictions are correct. If the predictions are viewed in a compiled form, all of the predicted outputs are considered in their numerical form, after which all of the numbers are averaged and the resulting average is forced to 0 or 1.

[0074] In one embodiment of the method, the predictions, as compiled, are used to classify samples. For validation samples the compilation is based on 1250 models, while for additional unknown samples all 3750 models are used in the compilation.

[0075] In one embodiment, each sample is classified as belonging to the disease type corresponding to the largest average in the compilation. In addition, it is desirable to be able to reject the second largest vote as well as test samples that do not belong to any of the disease types. In order to reject those samples that do not belong, a distance dc from a sample to the ideal vote for each disease type is defined as

\begin{matrix} d_{c} = \frac{1}{2} \sum_{i = 1}^{4} {(o_{i} - δ_{i, c})}^{2} & (1) \end{matrix}

[0076] where c is a disease type, oi is the average from the compilation for disease type i, and δi,c is unity if i corresponds to disease type c and zero otherwise. The distance is normalized such that the distance between two ideal samples belonging to different disease categories is unity. Based on the validation group, an empirical probability distribution of its distances is generated for each disease type.

[0077] The empirical probability distributions are preferably built using each supervised pattern recognition method 111 independently (not the average from the compilation). Thus, the number of entries in each distribution is given by 1250 multiplied by the number of samples belonging to the disease type. For a given test sample, the possible classifications based on these probability distributions can be rejected. This means that for each disease category a cutoff distance from an ideal sample is defined, within which, based on the validation samples, a sample of this category is expected to be. The distance given by the 95th percentile of the probability distribution is preferably chosen as a cutoff, which means that if a sample is outside of this cutoff distance it cannot be confidently diagnosed. It should be noted that the classification as well as the extraction of important genes (see below) converges using less than 100 supervised pattern recognition method 111 models. 3750 supervised pattern recognition method 111 models are preferred is because sufficient statistics exist for these empirical probability distributions.

[0078] For each disease category the sensitivity and specificity of the diagnosis may be calculated (see Table 1 below). Table 1 gives sensitivity, specificity and ROC curve areas for both validation and test samples. Both the sensitivity and the specificity are very high for all categories. It should be noted, that they generally depend on the kind of samples that are used as test samples.

1TABLE 1CategorySensitivitySpecificityROC curve areaEWS 93%100%1.0BL100%100%1.0NB100%100%1.0RMS 96%100%1.0

[0079] For example, in the case of SRBCT classification, using normal muscle samples as tests makes it harder to separate out RMS samples. If only samples from the four categories were used as blind distance cutoffs, it could easily have been designed such that both the sensitivity and the specificity would have been 100% for all diseases. However, it is preferred that the method is tested using a variety of blind tests. If it is desirable to improve rejection of for example normal muscle samples, one could incorporate them as a fifth category in the training process. However, using more samples of all four categories in the training is initially probably the best way to improve the diagnostic separation.

[0080] The Receiver Operator Characteristic (ROC) curve area is identical to another more intuitive and easily computed measure of discrimination: the probability that in a randomly chosen pair of samples, one belonging to and one not belonging to the disease category, the one belonging to the category is the one with the closest distance to the ideal for that particular category. Since the ROC curve areas are unity for all disease categories (see Table 1), it is possible to define cutoff distances such that both the sensitivity and the specificity are 100% for all diseases. However, based on the training and validation groups it is difficult to motivate such cutoff distances.

[0081] The next step in a method in accordance with the invention is to actually rank the data. This step can in principle be done in two ways; (1) model-independent and (2) model-dependent analysis respectively. Due to the relative small number of samples, the model-dependent analysis is preferred when using ANN models.

[0082] The sensitivity (S) of the outputs (o) with respect to any of the 2308 input variables (xk) is defined as:

\begin{matrix} S_{k} = \frac{1}{N_{s}} \frac{1}{N_{o}} \sum_{s = 1}^{N_{s}} \sum_{t - 1}^{N_{o}} &LeftBracketingBar; \frac{{δo}_{i}}{δ x_{k}} &RightBracketingBar; & (2) \end{matrix}

[0083] where Ns is the number of samples (63 or 88) and No is the number of outputs (4). The procedure for computing Sk involves a committee of 3750 models. In addition we have defined a sensitivity for each output i (Si), which is analogous to Eq. (2) but without the sum over outputs. Furthermore, a sensitivity can be defined for each sample (or subsets of samples) individually, by only using that sample(s) in the sum over samples in Eq. (2). For all these sensitivities the sign of the sensitivity has also been defined. The sign signals whether the largest contribution to the sensitivity stems from positive or negative terms. A positive sign implies that increasing the expression rate of the gene increases the possibility that the sample belongs to this cancer type, while a negative sign means that decreasing the expression rate of the gene increases the same possibility. In other words, the sign does not tell whether a gene is up- or down-regulated but if it is more or less expressed in this cancer type as compared to the others. This means the genes are ranked not only according to their importance for the total classification, but also according to their importance for the different disease categories separately. The genes are preferably given a total rank as well as a separate rank for each disease category. Based on these ranks each gene is classified according to which disease category it is highly expressed in.

[0084] In one embodiment, once ranked, a relevant set of data can be selected module 114 by minimizing the amount of data to be used to classify and identify a particular disease. In one embodiment, a pre-determined amount of data having the highest ranking are selected. Of course, other selection methods may be employed without deviating from the spirit and scope of the present invention as recited in the attached claims.

[0085] Implementation of Methods of the Invention

[0086] In embodiments of the method in which the supervised pattern recognition method 111 is an artificial neural network, a general purpose computing system as depicted in FIG. 2 can be utilized. An exemplary ANN processing system 200 provides an artificial neural network that also receives experimental data to train the artificial neural network, to verify the output of an artificial neural network, and to identify relevant genes using the neural network.

[0087] Those of ordinary skill in the art will appreciate that the ANN processing system 200 may include many more components than those shown in FIG. 2. However, the components shown are sufficient to disclose an illustrative embodiment for practicing the present invention. As shown in FIG. 2, the ANN processing system 200 is connected to a WAN/LAN, or other communications network, via network interface unit 210. Those of ordinary skill in the art will appreciate that network interface unit 210 includes the necessary circuitry for connecting the ANN processing system 200 to a WAN/LAN, and is constructed for use with various communication protocols including the TCP/IP protocol. Typically, network interface unit 210 is a card contained within the ANN processing system 200.

[0088] The ANN processing system 200 also includes processing unit 212, video display adapter 214, and a mass memory, all connected via bus 222. The mass memory generally includes RAM 216, ROM 232, and one or more permanent mass storage devices, such as hard disk drive 228, a tape drive, CD-ROM/DVD-ROM drive 226, and/or a floppy disk drive. The mass memory stores operating system 220 for controlling the operation of ANN processing system 200. It will be appreciated that this component may comprise a general purpose server operating system as is known to those of ordinary skill in the art, such as UNIX, LINUX, MAC OS®, or Microsoft WINDOWS NT®. Basic input/output system (“BIOS”) 218 is also provided for controlling the low-level operation of ANN processing system 200.

[0089] The mass memory as described above illustrates another type of computer-readable media, namely computer storage media. Computer storage media may include volatile and nonvolatile, removable and non-removable media implemented in any method or technology for storage of information, such as computer readable instructions, data structures, program modules or other data. Examples of computer storage media include RAM, ROM, EEPROM, flash memory or other memory technology, CD-ROM, digital versatile disks (DVD) or other optical storage, magnetic cassettes, magnetic tape, magnetic disk storage or other magnetic storage devices, or any other medium which can be used to store the desired information and which can be accessed by a computing device.

[0090] The mass memory also stores program code and data for providing an ANN processing and network development. More specifically, the mass memory stores applications including ANN processing module 230, programs 234, and other applications 236. ANN processing module 230 includes computer executable instructions which, when executed by ANN processing system 200, performs the logic described above.

[0091] The ANN processing system 200 also comprises input/output interface 224 for communicating with external devices, such as a mouse, keyboard, scanner, or other input devices not shown in FIG. 2. Likewise, ANN processing system 200 may further comprise additional mass storage facilities such as CD-ROM/DVD-ROM drive 226 and hard disk drive 228. Hard disk drive 228 is utilized by ANN processing system 200 to store, among other things, application programs, databases, and program data used by ANN processing module 230. For example, customer databases, product databases, image databases, and relational databases may be stored. The operation and implementation of these databases is well known to those skilled in the art.

[0092] A set of processing modules making up an embodiment of an artificial neural network according to the invention is illustrated in FIG. 3. The artificial neural network disclosed herein corresponds to a generic neural network of no particular topology for the network of nodes contained therein. The neural network typically utilizes a form of competitive learning for the operation of the nodes within the network. Within competitive learning networks, a large number of data vectors are distributed in a highly dimensional space. These data vectors represent known values for experimental data that typically reflect a probability distribution of the input experimental data. From this probability distribution representation, predictions for unknown values for similar input data may be determined.

[0093] In all of these competitive learning networks, the networks are typically presented a set of input data that possesses a corresponding set of results data. From these data values, the network of nodes “learns” a relationship between the input data and its corresponding results data. In this process, the probability distribution relationship is estimated using the multi-dimensional network of nodes. This relationship is represented within a set of artificial neural network coefficients for a particular topology of nodes.

[0094] One skilled in the art will recognize that competitive learning networks include a nearly infinite number of network topologies that may be used to represent a particular probability distribution relationship without deviating from the spirit and scope of the present invention as recited within the attached claims. In addition, artificial neural networks may utilize various well-known algorithm architectures, including hard-competitive learning (i.e. “winner-take-all” learning), soft competitive learning without a fixed network dimensionality, and soft competitive learning with a fixed network dimensionality, to specify an artificial neural network according to the invention as recited within the attached claims. Each of these algorithm architectures represents the same probability distribution relationship; however each of the various algorithm architectures better optimize corresponding processing parameters, which are often mutually exclusive with each other. These parameters include error minimization or the minimization of an expected quantization error, entropy maximization for the reference vectors used within a network, and topology-preserving or feature mapping architectures that attempt to map high-dimensional inputs signals onto lower-dimensional structures in a manner that attempts to preserve similar relationships found within the original data within the post-mapping data. As such, any of these types of algorithm architectures may be used to construct an artificial neural network without deviating from the spirit and scope of the present invention as recited within the attached claims.

[0095] Now referring to FIG. 3, an artificial neural network processing system 301 comprises a learning module 311, a prediction module 321, and a database of network node coefficients 313. The learning module 311 is used with a set of experimental data 315 that possesses a corresponding set of experimental results 316 to generate a set of network node coefficients that represent a probability distribution relationship for the experimental data 315-experimental result 316 data set for a particular neural network topology and algorithm architecture. The learning module 311 includes a data learning input module 312 that receives the experimental data 315-experimental result 316 data set generated using the process described above. The learning module 311 also includes an ANN training module 313 that processes the experimental data 315-experimental result 316 data set to generate the coefficients used to specify the probability distribution relationship and an ANN coefficient storage module 314 for storing the coefficients that have been previous generated within the database 313 for later use.

[0096] The data processing within the learning module 311 may proceed in a batch processing fashion in which all of the vectors within the experimental data 315 experimental result 316 data set are processed at a single time. In such a process, the experimental data 315-experimental result 316 data set is received by the input module 312, processed by the training module 313, and the generated coefficients are placed within the database 313 by the storage module 314. Alternatively, the experimental data 315-experimental result 316 data set may be processed as a sequence of smaller data sets in which the experimental data 315-experimental result 316 data set data values are generated at different times. In such a process, the training module 313 uses the previously stored coefficients retrieved by the storage module along with a new small data set provided by the input module 312 to generate an updated set of coefficients. These updated coefficients may be once again stored within the database 313 for use at a later time.

[0097] Once an artificial neural network 301 has been trained, the prediction module 321 may be used to predict, or classify, a particular test data value 325. The prediction module 321 includes a data prediction input module 322, an ANN prediction module 323, and an ANN curve slope module 324. The data prediction input module 322 receives the input test data generated as described above for use in the prediction module. The ANN prediction module 323 receives and utilizes the network coefficient values for the neural network from the ANN coefficient database 313 to predict the possible result for the probability distribution relationship specified within the neural network. This output value is used by the ANN curve slope module 324 to determine all possible values for a given gene, in the manner discussed above, to determine a curve slope value. This slope value is then output for later use in ranking and classifying the individual genes used to determine the presence, or lack there of, for a disease.

[0098] The embodiments described herein are implemented as logical operations performed by a computer. The logical operations of these various embodiments of the present invention are implemented (1) as a sequence of computer implemented steps or program modules running on a computing system and/or (2) as interconnected machine modules or hardware logic within the computing system. The implementation is a matter of choice dependent on the performance requirements of the computing system implementing the invention. Accordingly, the logical operations making up the embodiments of the invention described herein can be variously referred to as operations, steps, or modules.

[0099] While the above embodiments of the invention describe the use of an artificial neural network to identify relevant genes associated with diseases and use the identified genes to classify and identify diseases, one skilled in the are will recognize that the use of the processing system discussed above are merely example embodiments of the invention. As long as experimental data is used to self-train a processing system using competitive learning processing, the present invention to would be useable in other data processing systems. It is to be understood that other embodiments may be utilized and operational changes may be made without departing from the scope of the present invention as recited in the attached claims.

[0100] Devices and Methods for Detecting, Monitoring and Treating SRBCTs

[0101] The genes given in table 2, 2b, or 5 below can be used to make up a selection of genes for detection of any one of the four SRBCT types of cancers: neuroblastoma (NB), rhabdoymosarcoma (RMS), Burkitt's lymphoma (BL), or the Ewing family of Tumors (EWS). The gene selection can be used to distinguish a SRBCT type cancer cell from a non-cancerous cell, from a cell of a different type of SRBCT cancer, or from a cell of any other different type of cancer. The cancer type of a gene indicates which cancer that it is differentially expressed in.

2TABLE 2ImageGeneE SRMSNBBLCancerId.symbolRankSignRankSignRankSignRankSignType812105AF1Q670−934−2+51−NB383188RCV1478−808+13+42−NB82225SFRP1160−264+17+85−NB878280CRMP1602−1255+12+45−NB135688CATA2354+155−37+88−NB308231EST524−1015+10+117−NB486110PFN21554+1500+31+31−NB377048EST733−560+23+102−NB784257KIF3C577+1099−64+44−NB395708DPYSL41269+591+28+91−NB292522EST221−667+32+189−NB813266FHL11045+1610−91+46−NB244618EST22−3+273−86−RMS298062TNNT243−4+95−475−RMS324494HSPB21605−13+7−420−RMS122159COL3A1791+29+1062−16−RMS788107AMPHL74+14+817+108−RMS377671ITGA71044+24+66−135−RMS784224FGFR436−5+431−604+RMS293500EST262−9+1084−138−RMS42558GATM379−12+25−1020−RMS246377EST719−36+641+75 {grave over ( )}−RMS809901COL15A11516−23+35−385−RMS769959COL4A21575+66+1786−26−RMS755750NME21840+26+591−82−RMS770394FCGRT3+186+79−18−EWS866702PTPN132+74−230−62−EWS357031TNFAIP65+119−103−60−EWS377461CAV16+91−90−101−EWS52076NOE17+33−1673+37−EWS1473131TLE210+1884−16−217−EWS208718ANXA112+827−1202−33−EWS80338SELENBP120+1316+42−151−EWS377731GSTM513+310−34−381−EWS814260FVT19+61−330−335−EWS364934DAPK142+1481+707−40−EWS755599IFI716+177−30−918−EWS291756TUBB517+31−1325+245−EWS308497EST27+1971−43−231−EWS609663PRKAR2B198−55−550+29+BL868304ACTA21286−151−122−71+BL

[0102]

3

TABLE 2b

EWS
RMS
NB
BL

Rank
Image Id.
Gene
Rank
Sign
Rank
Sign
Rank
Sign
Rank
Sign
Cancer Type

1
296448
IGF2
8
−
1
+
918
−
19
−
RMS

2
207274
IGF2
19
−
2
+
1152
−
11
−
RMS

3
841641
CCNID1
11
+
38
−
118
+
6
−
EWS/NB

4
365826
GAS1
25
+
69
+
22
−
9
−
EWS/RMS

5
486787
CNN3
130
−
39
+
14
+
17
−
RMS/NB

6
770394
FCGRT
3
+
186
−
79
−
18
−
EWS

7
244618
EST
22
−
3
+
273
−
86
−
RMS

8
233721
IGFBP2
148
+
43
+
598
+
1
−
Not BL

9
43733
GYG2
4
+
261
−
99
−
21
−
EWS

10
295985
EST
1
−
51
+
9
+
522
+
Not EWS

11
629896
MAP1B
360
−
893
+
1
+
23
−
NB

12
840942
HLA-DPB1
1161
+
383
−
6
−
12
+
BL

13
80109
HLA-DQA1
226
−
1589
−
20
−
3
+
BL

14
41591
MN1
257
+
18
+
4
−
169
−
EWS/RMS

15
866702
PTPN13
2
+
74
−
230
−
62
−
EWS

16
357031
TNFAIP6
5
+
119
−
103
−
60
−
EWS

17
782503
EST
26
+
219
−
104
+
14
−
EWS/NB

18
377461
CAV1
6
+
91
−
90
−
101
−
EWS

19
52076
NOE1
7
+
33
−
1673
+
37
−
EWS

20
811000
LGALS3BP
24
+
246
−
257
+
13
−
EWS/NB

21
308163
EST
49
+
88
+
191
−
22
−
RMS/EWS

22
812105
AF1Q
670
−
934
−
2
+
51
−
NB

23
183337
HLA/DMA
317
−
1574
−
24
−
8
+
BL

24
714453
IL4R
208
−
20
+
8
−
238
+
RMS/BL

25
298062
TNNT2
43
−
4
+
95
−
475
−
RMS

26
39093
MNPEP
46
+
224
+
21
−
103
−
EWS/RMS

27
212542
EST
62
+
993
+
1086
+
2
−
Not BL

28
204545
EST
471
+
49
+
1455
+
5
−
Not BL

29
383188
RCV1
478
−
808
+
13
+
42
−
NB

30
82225
SFRP1
160
−
264
+
17
+
85
−
NB

31
44563
GAP43
693
−
191
−
3
+
166
−
NB

32
289645
APLP1
41
+
102
−
107
+
61
−
EWS/NB

33
324494
HSPB2
1605
−
13
+
7
−
420
−
RMS

34
563673
ATQ1
35
+
1527
−
523
+
7
−
Not BL

35
1473131
TLE2
10
+
1884
−
16
−
217
−
EWS

36
1416782
CKB
134
+
416
+
851
+
4
−
Not BL

37
417226
MYC
63
+
222
−
29
−
110
+
EWS/BL

38
878280
CRMP1
602
−
1522
+
12
+
45
−
NB

39
812965
MYC
23
+
296
−
11
−
308
+
EWS/BL

40
122159
COL3A1
791
+
29
+
1062
−
16
−
RMS

41
609663
PRKAR2B
198
−
55
−
550
+
29
+
BL

42
461425
MYL4
98
−
7
+
80
−
419
−
RMS

43
1469292
PIM2
1007
+
242
−
53
−
36
+
BL

44
809910
1-8U
52
+
168
+
159
−
56
−
RMS/EWS

45
824602
IFI16
336
+
149
−
33
−
89
+
EWS/BL

46
245330
IGF2
65
−
6
+
147
−
434
−
RMS

47
135688
GATA2
354
+
155
−
37
+
88
−
NB

48
1409509
TNNT1
141
−
8
+
153
−
313
−
RMS

49
788107
AMPHL
74
−
14
+
817
+
108
−
RMS

50
784593
EST
224
−
299
+
39
+
68
−
RMS/NB

51
756556
C1NH
90
+
238
+
284
−
38
−
RMS/EWS

52
208718
ANXA1
12
+
827
−
1202
−
33
−
EWS

53
308231
EST
524
−
1015
+
10
+
117
−
NB

54
486110
PFN2
1554
+
1500
+
31
+
31
−
NB

55
21652
CTNNA1
104
+
117
+
2245
−
15
−
Not BL

56
377671
ITGA7
1044
+
24
+
66
−
135
−
RMS

57
745343
REG1A
166
+
93
−
40
−
153
+
EWS/BL

58
241412
ELF1
882
−
1473
−
60
−
27
+
BL

59
504791
GSTA4
276
+
2003
+
108
+
24
−
Not BL

60
841620
DPYSL2
51
+
100
−
366
+
70
−
EWS/NB

61
859359
PIG3
58
−
28
+
288
+
152
−
RMS/NB

62
45542
IGFBP5
991
+
89
+
1661
−
10
−
RMS

63
80338
SELENBP1
20
+
1316
+
42
−
151
−
EWS

64
45291
DRPLA
532
+
81
+
872
−
28
−
Not BL

65
323371
APP
1689
−
90
+
594
−
65
−
Not BL

66
897788
PTPRF
59
+
1358
−
734
−
20
−
Not BL

67
377731
GSTM5
13
+
310
−
34
−
381
−
EWS

68
784224
FGFR4
36
−
5
+
431
−
604
−
RMS

69
293500
EST
262
−
9
+
1084
−
138
−
RMS

70
767183
HCLS1
1481
−
1424
−
50
−
32
+
BL

71
297392
MT1L
1361
−
483
−
113
−
30
+
BL

72
325182
CDH2
590
−
919
−
5
+
260
−
NB

73
1435862
MIC2
14
+
518
−
371
−
97
−
EWS

74
377048
EST
733
−
560
+
23
+
102
−
NB

75
814260
FVT1
9
+
61
−
330
−
335
−
EWS

76
784257
KIF3C
577
+
1099
−
64
+
44
−
NB

77
42558
GATM
379
−
12
+
25
−
1020
−
RMS

78
814526
HSRNASEB
164
−
198
+
98
−
105
+
RMS/BL

79
839736
CRYAB
516
+
67
+
51
−
183
−
EWS/RMS

80
395708
DPYSL4
1269
+
591
−
28
+
91
−
NB

81
416959
NFIB
1420
−
86
+
160
+
72
−
RMS/NB

82
364934
DAPK1
42
+
1481
+
707
−
40
−
EWS

83
868304
ACTA2
1286
−
151
−
122
−
71
+
BL

84
755599
IFI17
16
+
177
−
30
−
918
−
EWS

85
246377
EST
719
−
36
+
641
+
75
−
RMS

86
291756
TUBB5
17
+
31
−
1325
+
245
−
EWS

87
809901
COL15A1
1516
−
23
+
35
−
385
−
RMS

88
769959
COL4A2
1575
+
66
+
1786
−
26
−
RMS

89
796258
SGCA
30
−
10
+
521
−
758
−
RMS

90
854899
DUSP6
774
+
150
+
838
+
39
−
Not BL

91
755750
NME2
1840
+
26
+
591
−
82
−
RMS

92
292522
EST
221
−
667
+
32
+
189
−
NB

93
308497
EST
27
+
1971
−
43
−
231
−
EWS

94
813266
FHL1
1045
+
1610
−
91
+
46
−
NB

95
200814
MME
639
−
1081
+
78
−
66
+
BL

96
768370
TIMP3
547
+
1132
+
606
+
25
−
Not BL

[0103] One embodiment of the invention offers a selection of genes that are expressed in a cancer cell. Such selections of genes function to characterize the cancer when the gene selection from the cancer cell is compared to the expression of an identical selection of genes from a noncancerous cell, or a different type of cancer cell. As used herein, the phrase “function to characterize” can mean to identify, to be indicative of, to be highly and/or differentially expressed in. The cancer to be identified can be neuroblastoma, rhabdomyosarcoma, Burkitt's, Ewing family of tumors, or combinations thereof. In one embodiment, at least one of the genes is chosen from table 5. In another embodiment, at least one of the genes is chosen from table 2, or 2b. In yet another embodiment, at least one of the genes is chosen from at least one of tables 6, 7, 8, or 9. In a further embodiment, there are at least 9 genes chosen from table 5, preferentially selected from the top ranked genes. In an even further embodiment, there are at least 9 genes chosen from at least one of tables 2, 2b, 6, 7, 8, or 9, preferentially selected from the top ranked genes.

[0104] As used herein, “Image ID” or “Clone ID” refer to particular genes that are given in various tables. In some embodiments of the invention, gene selections include one or more genes with a given Image ID. In one embodiment, the cancer to be identified is neuroblastoma, and the gene selection includes at least one of the genes with the following Image Id: 812105, 383188, 82225, 878280, 135688, 308231, 486110, 377048, 784257, 395708, 292522, or 813266. In another embodiment, the cancer to be identified is rhabdomyosarcoma and the gene selection includes at least one of the genes with the following Image Id: 244618, 298062, 324494, 122159, 788107, 377671, 784224, 293500, 42558, 246377, 809901, 769959, or 755750. In yet another embodiment, the cancer to be identified is Burkitt's, and the gene selection includes at least one of the genes with the following Image ID: 609663, or 868304. In a further embodiment, the cancer to be identified is a Ewing family of tumors cancer, and the gene selection includes at least one of the genes with the following Image Id: 770394, 866702, 357031, 377461, 52076, 1473131, 208718, 80338, 377731, 814260, 364934, 755599, 291756, 308497, or combinations thereof.

[0105] Another embodiment of the invention includes a selection of least one product of a selection of genes. As used herein, the term “product of a gene” or “gene product” can include entities that are naturally produced by the cancer cell. Examples of gene products include, but are not limited to, DNA, mRNA, and proteins. Gene products can be utilized in methods of the invention for diagnosing a cancer or as a target for therapeutic treatment.

[0106] The invention includes gene selections that can include one or more genes chosen from Table 2, 2b or 5. Table 2 lists 41 genes that are specifically expressed in one of the four types of SRBCTs that have not been previously reported to relate to cancer, and which could be used, in any combination, to make up a selection of genes in accordance with the invention. Table 2b shows the 96 top ranked genes, including the 41 genes of Table 2. Alternatively, Table 5 lists the top 200 ranked genes that also include those of Table 2b.

[0107] One embodiment of the invention includes a method of targeting a product of at least one of the genes in table 5 that includes administering a therapeutic agent having a therapeutic effect on said gene product. Another embodiment includes a method of therapeutic treatment of a cancer by using a selection of genes or their products that are expressed in a cancer cell, wherein the genes and/or their products function to characterize the cancer when the gene selection from the cancer cell is compared to the expression of an identical selection of genes from a noncancerous cell, or a different type of cancer cell. Another embodiment includes a method of targeting a product of at least one of the genes in table 2. Yet another embodiment includes a method of targeting a product of at least one of the genes of in table 6, 7, 8 or 9. A therapeutic agent is a biological or chemical entity that are based on some aspect of a gene. Examples of therapeutic agents include, but are not limited to, vaccines, antibodies, oligonucelotide DNA antisense, RNAi, chemical molecules, proteins, inhibitors, antagonists, or combinations thereof. Having a therapeutic effect on a gene product can include, but is not limited to, inhibition of some activity or process of a cell, cessation of some activity or process of a cell, an increase in some activity or process of a cell, interference with some process or activity of a cell, modification of the expression of at least one gene, modification of the expression of at least one gene product, modification of the fucntion of at least one gene, and modification of the fucntion of at least one gene product.

[0108] Administration of a therapeutic agent can include delivery of the therapeutic agent to the cell, to the vicinity of the cell, to the vicinity of a tumor, to a patient that has a tumor, or any combination thereof. In one embodiment of the invention, a method of targeting the product of at least one gene is undertaken in order to have an effect on a cancer cell or tumor. To have an effect on a cancer cell means to alter the course of progression, development, or metastasis of a cancer cell. Cancer cells that can be affected by methods of the invention include, but are not limited to, neuroblastoma, rhabdomyosarcoma, Burkitt's, and the Ewing family of tumors. Methods of having an effect on these various types of cancers can be accomplished by having an effect on a product of at least one gene of tables 6, 7, 8, and 9 respectively.

[0109] Another embodiment of the invention includes a method of targeting the product of at least one gene of table 10 that includes administering a therapeutic agent having a therapeutic effect on said gene product. A therapeutic agent is a biological or chemical entity that are based on some aspect of a gene. Examples of therapeutic agents include, but are not limited to, vaccines, antibodies, oligonucelotide DNA antisense, RNAi, chemical molecules, proteins, inhibitors, antagonists, or combinations thereof. Having a therapeutic effect on a gene product can include, but is not limited to, inhibition of some activity or process of a cell, cessation of some activity or process of a cell, an increase in some activity or process of a cell, and interference with some process or activity of a cell.

[0110] Administration of a therapeutic agent can include delivery of the therapeutic agent to the cell, to the vicinity of the cell, to the vicinity of a tumor, to a patient that has a tumor, or any combination thereof. In one embodiment of the invention, a method of targeting the product of at least one gene is undertaken in order to have an effect on a cancer cell or tumor. To have an effect on a cancer cell means to alter the course of progression, development, or metastasis of a cancer cell. Cancer cells that can be affected by methods of the invention include, but are not limited to, neuroblastoma, rhabdomyosarcoma, Burkitt's, and the Ewing family of tumors. Methods of having an effect on these various types of cancers can be accomplished by having an effect on a product of at least one gene of tables 6, 7, 8, and 9 respectively.

[0111] Another embodiment of the invention includes methods of using a selection of genes that function to characterize the cancer when the gene selection from a cancer cell is compared to the expression of an identical selection of genes from a noncancerous cell or an identical selection of genes from a different type of cancer cell expressed in a cell for diagnosing a cancer. As used herein, diagnosing can include detection, prognosis and prediction, classification, and or monitoring.

[0112] One embodiment of the invention includes such a method for diagnosis that includes use of a gene selection that includes at least one gene in Table 5. Another embodiment includes such a method for diagnosis that includes use of a gene selection that includes at least one gene from Table 2. The cancer to be diagnosed can include neuroblastoma, rhabdomyosarcoma, Burkitt's, Ewing family of tumors, or combinations thereof.

[0113] As used herein, “Image ID” or “Clone ID” refer to particular genes that are given in the various tables. In some embodiments of the invention, methods for diagnosing include use of a gene selection that includes one or more genes with a given Image ID. In one embodiment, the cancer to be diagnosed is neuroblastoma, and the gene selection includes at least one of the genes with the following Image Id: 812105, 383188, 82225, 878280, 135688, 308231, 486110, 377048, 784257, 395708, 292522, or 813266. In another embodiment, the cancer to be diagnosed is rhabdomyosarcoma and the gene selection includes at least one of the genes with the following Image Id: 244618, 298062, 324494, 122159, 788107, 377671, 784224, 293500, 42558, 246377, 809901, 769959, or 755750. In yet another embodiment, the cancer to be diagnosed is Burkitt's, and the gene selection includes at least one of the genes with the following Image ID: 609663, or 868304. In a further embodiment, the cancer to be diagnosed is a Ewing family of tumors cancer, and the gene selection includes at least one of the genes with the following Image Id: 770394, 866702, 357031, 377461, 52076, 1473131, 208718, 80338, 377731, 814260, 364934, 755599, 291756, 308497, or combinations thereof. Another embodiment of the invention includes use of a product of at least one of those genes for diagnosis of a cancer.

[0114] Another embodiment of the invention includes devices for use in a method of diagnosis. Examples of such devices can include protein arrays, cell arrays, a device to detect single polymorphisms in disease conditions, devices containing metaphase BAC genomes, cDNA arrays, and oligonucleotide arrays.

WORKING EXAMPLES

[0115] The following examples provide a nonlimiting illustration of various embodiments of the invention.

Example 1

Preparation of Microarrays

[0116] Preparation of glass cDNA microarrays, probe labeling, hybridization and image acquisition were performed according to the protocol given below, which is a standard NHGRI protocol (http://www.nhgri.nih.gov/DIR/LCG/15K/HTML/protocol.html).

[0117] Gene-specific DNA was produced by PCR amplification of purified template plasmid DNAs from cloned ESTs. The PCR product was purified by ethanol precipitation, thoroughly resuspended in 3×SSC, and printed onto a poly-L-lysine coated slide.

[0118] The materials, reagents, and solutions used include: 96 well alkaline lysis miniprep kit (Edge BioSystems, Gaithersburg, Md.); LB Broth (Biofluids, Rockville, Md.); Superbroth (Biofluids, Rockville, Md.); dATP, dCTP, dGTP, dTTP, 100 mM each #27-2035-02, store frozen, −20° C. (Pharmacia, Peapack, N.J.); PCR primer AEK M13F (5′-GTTGTAAAACGACGGCCAGTG-3′) and AEK M13R (5′-CACACAGGAAACAGCTATG-3′) at 1 mM concentration, store frozen, −20° C.; 10×PCR Buffer, #N808-0189, and Ampli-Taq DNA polymerase, #N08-4015 store frozen, −20° C. (Perkin Elmer, Norwalk, Conn.); Carbenicillin (Gibco-BRL, Rockville, Md.); Ethanol (200 Proof USP Ethyl Alcohol); 1M Tris-HCl (pH 8); 0.5M NaEDTA (pH 8); T Low E; Buffer; 20×SSC; Glycerol (enzyme grade); Sodium Acetate (tri-hydrate); Boric Acid; w Sodium Hydroxide (1M); Glacial Acetic Acid; Succinic anhydride, #23969-0 and 1-methyl-2-pyrrolidinone, #32863-4 (Aldrich Chemical Co., St. Louis, Mo.); Diethyl Pyrocarbonate (DEPC) treated H2O; Master set of clone-purified, sequence verified human ESTs (e.g. gf211 release, Research Genetics, Huntsville, Ala.); 96 pin inoculating block (#VP 4088, V&P Scientific, Inc, San Diego, Calif.); Airpore Tape Sheets, (#19571, QIAGEN Inc., Valencia, Calif.); Sterile 96-well plate seals, (e.g. #SEAL-THN-STR (Elkay Products, Inc., Shrewsbury, Mass.); 96-well U-Bottom Microtiter Plates, #3799 and 96-well V-Bottom Microtiter Plates, #3894 (Corning Inc., Corning, N.Y.); Thin wall PCR plate and Cylcleseal PCR plate sealer (e.g. #1038-50-0 and #1044-39-4, Robbins Scientific Corp. Sunnyvale, Calif.); household one-gallon sealable storage bags (e.g. Glad Lock); heat sealable storage bags and heat sealer; 0.2 mm Sterile Filtration unit; Diamond scribe for writing on slides; Pyrex baking dish (˜24×34×5 cm); UV transparent plastic wrap (e.g. Glad Cling Wrap); 30 slide rack (stainless steel) #113 and 30 slide glass tank, #122 (Shandon Lipshaw, Pittsburgh, Pa.); 1L glass tank; 1L glass beaker; 1L graduated; cylinder; Stir bar; Slide Box (plastic with no paper or cork liners), (e.g. #60-6306-02, PGC Scientific, Gaithersburg, Md.); PCR heat cycler (e.g. DNA Engine Tetrad, MJ Research, Waltham, Mass.); Centrifuge with a horizontal (“swinging bucket”) rotor with a depth capacity of 6.2 cm for spinning microtiter plates and filtration plates (e.g. Sorvall Super T 21, Sorvall Inc., Newtown, Conn.); 37° C. Shaker incubator with holders for deep-well plates; 37° C. Waterbath; 65° C. Incubator; Vortex mixer; Immunowash microtiter plate washer, #1575 (BioRad, Hercules, Calif.); pH Meter; Platform Shaker; UV Stratalinker 2400, (Stratagene La Jolla, Calif.); Stirrer/Hotplate; Robotic slide printer; −80° C. Freezer; −20° C. Freezer; 45% (w/v) Sterile Glycerol; 450 grams enzyme grade glycerol per liter 9 Autoclave and store at room temperature); T low E Buffer; 1M Tris-HCl (pH 8.0) 10 mL; 0.5 M EDTA (pH 8.0) 0.2 mL; DEPC treated H2O 990 mL (Autoclave and store at room temperature); Carbenicillin stock solution (1 gram of carbenicillin in 10 mls of sterile water, Sterile filter with a 0.2 micron filter, Store frozen at −20° C.); LB with 100 μg/ml carbenicillin (Add 1 ml of carbenicillin stock solution to 1 liter of LB, Make fresh); 3M Sodium Acetate pH=6.0 (408.24 grams sodium acetate (tri-hydrate) per liter, 3M acetic acid (172.4 ml per liter),Titrate the pH of the 3M sodium acetate solution to pH 6.0 with the 3M acetic acid solution, Filter sterilize using a 0.2 micron filter, Store at room temperature); Ethanol/acetate mix (Ethanol (100%) 950 ml, Sodium acetate pH=6.0, 50 ml); 1000 ml 3×SSC; DEPC H2O 42.5 ml; 20×SSC 7.5 ml; 50 ml 70% Ethanol; Ethanol (100%) 350 ml; DEPC H2O 150 ml; 500 ml.

[0119] The first step was to grow the EST clones. The cDNA clones were obtained from Research Genetics (Huntsville, Ala.) and were their standard microarray set, which consisted of 3789 sequence-verified known genes and 2778 sequence-verified ESTs.

[0120] The sealed master plates were incubated over night at 37° C. Most suppliers provide low density bacterial cultures. Replicating directly from these dilute stocks frequently results in non-growth in the secondary culture. If making the template from a plate that had previously been cultured to high density before freezing, this initial growth step should not be used, as it will reduce the viability of the cultures.

[0121] A set of standard 96 well round (U) bottom plates were then prepared by labeling all plates and placing 100 μl of LB broth containing 100 μg/ml carbenicillin in each well. These plates were used as working copies. To preserve the master set of plates, it was useful to make replicate copies of the master plate to serve as working copies when the master plate was first replicated. The EST clones were then checked to insure that they were in a vector conferring ampicillin resistance, as is common with human IMAGE clones.

[0122] The master plates were spun briefly (about two minutes) at 1000 rpm in a horizontal microtiter plate rotor to remove condensation and droplets from the seals before opening. Bacterial culture fluid on the sealers can easily be transferred from one well to others, cross-contaminating the stocks.

[0123] Then a container was partially filled with 100% alcohol. The 96 pin-replicating tool was dipped in the alcohol, removed and then the pins were flamed.

[0124] The inoculation block was allowed to cool briefly, then the replicating tool was dipped in the master plate and then into the daughter plate. This was repeated as necessary for each plate inoculated. It is useful to color the plate corner near the A-1 well of all master and daughter plates with a marker pen before beginning the replication process in order to reduce mistakes in the relative orientation of the plates. The suggested plates have a notch at this corner as well.

[0125] The inoculated LB plates, with the lids on, were placed into a one gallon sealable bag containing a moistened paper towel and grow overnight at 37° C. Many 37° C. incubators tend to dry out microtiter plate cultures. Placing the plates in a highly humidified bag avoids this problem.

[0126] Next, deep well plates were filled with 1 ml of Superbroth (100 μg/ml carbenicillin) per well. These plates served as the source of culture for template preparation. Using the replicating tool, the deep well plates were then inoculated directly from the freshly grown LB plates. Next, the openings of the deep well plates were covered with Qiagen Airpore Tape Sheets and the plastic lids were placed over the sheet. The plates were then placed in a 37° C. shaker incubator at 200 RPM for twenty-four hours. 50 μl of 45% (w/v) sterile glycerol was added to each well of any working plates that are to be frozen (−80° C.) and subsequently used as culture sources.

[0127] After the EXT clones were grown, the plasmid templates have to be isolated. First, the lysis buffer (Edge Biosystems Kit) was warmed to 37° C. to dissolve the SDS. Then the RNAse solution was added to the resuspension buffer (Edge Biosystems Kit), 1 ml/100 ml, and stored at 4° C. The receiving plates were prepared from the Edge Biosystems Kit by adding 350 μl of ethyl alcohol to each well of the receiving plates. The filter plate was then placed on top and secured with tape. The bacterial cultures in the deep well plates were centrifuged at 1500×g for seven minutes in a centrifuge equipped with a horizontal rotor for 96-well plates. They were then briefly inverted and excess media was tapped out on a clean paper towel. The pellets will loosen and may be lost when pouring off excess media if this step is delayed.

[0128] The pellet was then resuspended in 100 μl of Resuspension Buffer, and Vortexed until the entire pellet was re-suspended. This step is critical. Poor resuspension of the cells results in clumps of cells that do not lyse in subsequent steps. This reduces the yield and decreases the purity of the product. 100 μl of Lysis Buffer was then added and the solution was mixed gently by rocking the plates from side to side, to avoid shearing the bacterial chromosomal DNA. 100 μl of Precipitation buffer was added to each well and briefly mixed. Then, 100 μl of Neutralization buffer was added to each well and Vortexed.

[0129] The contents of the deep wells were then transferred to the waiting filter plates/receiving plate stacks using the wide bore pipette tips provided in the kits. The stacked plates were then centrifuged at 1500×g for twelve minutes in a centrifuge equipped with a horizontal rotor for 96-well plates. The stacked plates were then removed from the centrifuge. The filter plates were removed and discarded. The alcohol and filtrate were decanted from the receiver plate and the excess alcohol was touched off on clean paper towels. 500 μl of 70% ethanol was added to each well and immediately decanted and excess alcohol was touched off with a clean paper towel. Then, the plates were placed in a clean drawer without their lids, covered with a clean paper towel and allowed to dry overnight.

[0130] The next day, the DNA was resuspended in 200 μl of T Low E Buffer. The top was sealed with plate sealer and rehydrated at 4° C. for at least two days before using. They were stored at −20° C. in the interim.

[0131] After the plasmid templates have been isolated, the EST inserts were amplified. For each 96 well plate to be amplified, a PCR reaction mixture was prepared containing the following ingredients: 1000 μl of 10×PCR Buffer, 20 μL of dATP (100 mM), 20 μL of dGTP (100 mM), 20 μL of dCTP (100 mM), 20 μL of dTTP (100 mM), 05 μL of AEK M13F primer (1 mM), 5 μL of AEK M13R primer (1 mM), 100 μL of Ampli-Taq polymerase (5 U/μl), and 8800 mL of H2O. The 96-well PCR plates were then labeled and 100 μl of the PCR reaction mixture from above was aliquotted to each well. The plates were then gently tapped to insure that no air bubbles were trapped at the bottom of the wells. 1 μl of purified EST plasmid template from above was then added to each well. The donor and recipient plates were then marked at the corner, near the A1 well to facilitate correct orientation during transfer of the template. It was important to make sure that the pipette tips were all submerged in the PCR reaction mix when delivering the template. Missing the liquid was easier when multi-channel pipettes were used.

[0132] The following thermal cycle series was then performed: 1 initial cycle of heating to 96° C. and holding for 30 sec, 25 cycles of denaturing at 94° C. for 30 sec, reannealing at 55° C. for 30 sec, and extending at 72° C. for 150 sec, one final cycle of holding at 72° C. for 5 minutes, then cooling to ambient temperature. After the above cycle, the plates were held at 4° C. while quality controls were performed.

[0133] The quality control was done by agarose gel electrophoresis of the ESTs. If this was the first time the template for these ESTs was being amplified, 2 μl of each PCR product was analyzed on a 2% agarose gel. If amplified products from this template had been previously tested, then one row of wells from each plate amplified was analyzed. Gel imaging allowed a rough quantitation of product while giving an excellent characterization of the product. Band size, as well as the number of bands observed in the PCR products, contributed to an understanding of the final results of the hybridization. The use of gel well formats suitable for loading from 96 well plates and programmable pipetters made this form of analysis feasible on a large scale.

[0134] The materials, reagents and solutions for the quality control check included: Electrophoresis apparatus with capacity for four 50 well combs, (e.g. #D3, Owl Scientific, Woburn, Mass.); 50×Tris-Acetate Electrophoresis BufferM; Agarose; Dye Solution (Xylene Cyanol/Bromophenol Blue) (e.g. #351-081-030, Quality Biological Inc., Gaithersburg Md.); Glycerol (enzyme grade); Ethidium Bromide solution (10 mg/ml); 100 base-pair ladder size standard; Programmable, 12-channel pipetter (e.g. #2019, Matrix Technologies, Lowell, Mass.); Disposable microtiter mixing trays (e.g. Falcon #353911, Becton Dickinson, Franklin Lake, N.J.); Electrophoresis power supply; 1×TAE Buffer; 50×TAE Buffer 40 ml; Ethidium Bromide (10 mg/ml) 0.1 ml and Water 960 ml; 1000 ml; Loading Buffer; Glycerol (enzyme grade) 4.0 ml, DEPC Water 0.9 ml, and Dye Solution* 0.1 ml for a total of 5.0 ml (*This solution is 0.25% (w/v) Xylene Cyanol and 0.25% (w/v) Bromophenol Blue); 100 bp Size Standards; DNA ladder (1 mg/ml) 50 μL, 1 M Tris-HCl (pH 8.0) 5 μ1,0.5 M EDTA (pH 8.0) 5 μl, and Loading Buffer 440 μl for a total of 500 μl

[0135] The electrophoresis was carried out with a 2% agarose gel (1×TAE) with four combs (50 tooth) that was submerged in an electrophoresis apparatus with sufficient 1×TAE buffer to just cover the surface of the gel. A reservoir of Loading Buffer was prepared, using 12 wells of a microtiter plate. Then a pipetter was programmed to sequentially carry out the following steps: fill with 2 μl, fill with 1 μL, fill with 2 μl, mix a volume of 5 μl five times, expel 5 μl. Twelve (12) disposable tips were then placed on the pipetter. 2 μL of PCR product from wells A1-A12 of the PCR plate were loaded, followed by 1 μl of air, then 2 μl of Loading Buffer from the reservoir. The tips were then placed in clean wells of a disposable mixing tray and the pipette was allowed to mix the sample and loading dye. The pipette tip was then placed in a 50 well row so that the tip containing the PCR product from well A1 is in the second well of the row, and the other tips are in every other succeeding well.

[0136] The process was repeated (changing tips each time), to load PCR plate row B starting in the 3rd well, interleaved with the A row, the C row starting at well 26, and the D row at well 27, interleaved with the C row. Then 5 μl of 100 bp Size Standards were placed in wells 1 and 50. This process was repeated, to load samples from rows E, F, G, and H in the second, 50 well row of gel wells, to load samples from two 96 well PCR plates per gel, or single row samples from 16 PCR plates. To reduce diffusion and mixing, a voltage was applied to the gel for a minute between loading each well strip. This caused the DNA to enter the gel, and reduced band spreading and sample loss.

[0137] A voltage was then applied to the gel and it was run until the bromophenol blue (faster band) had nearly migrated to the next set of wells. For a gel that is 14 cm in the running dimension, and 3 cm between each row of wells, 200 volts were applied for 15 minutes. Digital photos of the gel were taken and the images stored for future reference. The gels should show bands of fairly uniform brightness distributed in size between 600 to 2000 base-pairs. Further computer analysis of such images can be carried out with image analysis packages to provide a list of the number and size of bands. Ideally this information can be made available during analysis of the data from hybridizations involving these PCR products.

[0138] After the quality control checks are run on the plates, the next step involves purifying the PCR products. 96 well V-bottom plates were filled with 200 μl per well of ethanol/acetate mix. The ethanol acetate solution used for precipitation is less acidic (pH 6) than is typically used. In this instance, more acidic solutions produce precipitates which are harder to resuspend without improving yield.

[0139] 100 μl per well of PCR product was transferred into V-bottom plates and mixed by pipetting a volume of 75 μl per well four times. The plates were then placed in a −80° C. freezer for one hour or stored overnight at −20° C. The plates were stored at −20° C. if they were to be left for more than one hour, because aggressive precipitation produces precipitates which are hard to resuspend. The plates were then thawed to reduce brittleness and melt any ice, which may have formed in the wells.

[0140] The plates were loaded into a centrifuge with a horizontal microtiter plate rotor and spun at 2600×g for 40 minutes at 4° C. Next, the supernatant from each well was aspirated using the Immunowash plate washer. Settings for the depth of aspiration by the plate washer needed to be adjusted to suit the microtiter plates used. It is advisable to leave approximately 10-20 ml in the bottom of the well to avoid disturbing the pellet.

[0141] 200 μl of 70% ethanol was delivered to each well in the plate using the Immunowash plate washer, and the plates were centrifuged at 2600×g for 40 minutes. The supernatant was aspirated from each well using the Immunowash plate washer, and the plates were dried overnight in a closed drawer. They should not be dried in a speed-vac because desiccated PCR products are hard to resuspend.

[0142] After the PCR products were purified, they were then resuspended by adding 40 μl of 3×SSC per well. The plates were then sealed with a foil sealer, taking care to achieve a tight seal over each well. The plates were then placed in heat sealable bags with paper towels moistened with 3×SSC and the bag was sealed with a heat sealer. The high external humidity within the sealed bag helped to keep the volumes in the individual wells from varying. The bags were then placed in a 65° C. incubator for 2 hours. The heat in the incubator was then turned off, and the plates were allowed to cool gradually in the incubator to avoid condensation on the sealers. The plates were stored at −20° C.

[0143] The yield of the PCR suspension was then checked by fluorometric determination of DNA concentration. 1 μl of resuspended PCR product from one row of wells from each plate on a 2% agarose gel was analyzed as previously described. Adequate precipitation and resuspension produced very intense bands, with no material failing to leave the loading well, and no smear of material from the band towards the loading well.

[0144] While it would be ideal to be able to exactingly quantify each EST PCR product and spot each DNA species at equivalent concentrations, it is impractical for most labs to do so when thousands of ESTs must be prepared. Fortunately, it is possible to use a strategy where excess DNA is spotted, so that the exact quantities used do not produce much variation in the observed results. When using this strategy, it is necessary to track the average productivity of the PCR reactions. Fluorometry provides a simple way to obtain an approximate concentration of the double-stranded PCR product in the PCR reaction mix.

[0145] Next, the double stranded DNA was quantified. The materials, reagents, and solutions necessary include: reference double-stranded DNA (0.5 mg/ml) (e.g. #15612-013 Gibco/BRL, Bethesda, Md.), 96 well plates for fluorescent detection (e.g. #7105, Dynex, Chantilly, Va.), Fluorometer (e.g. #LS50B, Perkin Elmer, Norwalk, Conn.), FluoReporter Blue dsDNA Quantitation Kit (#F-2962, Molecular Probes, Eugene, Oreg.), TE, 12 channel multi-pipetters, Computer equipped with Microsoft Excel software, Ds-DNA Standards: 50 μg/ml, 100 μg/ml, 250 μg/ml, 500 μg/ml, μl TE 90, 80, 50, 0 μl ds-DNA (0.5 mg/ml) 10, 20, 50, 100, (It is good practice to check both the integrity (agarose gel) and the concentration (absorbance) of the standard before use); Fluor Buffer (Hoechst 33258 solution (contains the dye at an unspecified concentration in a 1:4 mixture of DMSO:H2O) (from kit) 25 μl, TNE Buffer (TNE Buffer is 10 mM Tris-HCl (pH 7.4), 2 M NaCl, 1 mM EDTA) (from kit) 10 ml.

[0146] The double stranded DNA was quantified as follows. 96 well plates were labeled for fluorescence assay. 200 μl of Fluor Buffer was added to each well. 1 μl of PCR product from each well in a row of a PCR plate was added to a row of the fluorometry plate. Samples were added to rows A through G of the fluorometry plate. In the final row of the fluorometry plate 1 μl of each of the series of ds-DNA standards 0 μg/ml (TE only), 50, 100, 250 and 500 μg/ml ds-DNA were added. This series was repeated twice in the final row.

[0147] The fluorometer was set for excitation at 346 nm and emission at 460 nm, and adjusted as necessary to read the plate. If the fluorometer used did not support automated analysis, the data table was exported to Excel. The response for the standards was tested to see that it was linear and reproducible from the range of 0 to 500 μg/ml of ds-DNA.

[0148] Next, the concentration of ds-DNA in the PCR reactions was calculated using the following equation, after subtracting the average 0 μg/ml value from all other sample and control values:

[ds-DNA (μg/ml)]=((PCR sample value)/(average 100 μg/ml value))*100

[0149] Constantly tracking the yields of the PCRs makes it possible to rapidly detect many ways in which PCR can fail or perform poorly. This assay can also be applied after precipitation and resuspension of the PCR products to monitor overall recovery of product. 1 μl of amplified products from one row of wells from each amplified plate by fluorometry was analyzed.

[0150] Slides were then coated with poly-L-lysine to have a surface that is both hydrophobic and positively charged. The hydrophobic character of the surface minimizes spreading of the printed spots, and the charge appears to help position the DNA on the surface in a way that makes cross-linking more efficient.

[0151] Materials, reagents, and solutions for coating the slides includes: Gold Seal Microscope Slides (#3011, Becton Dickinson, Franklin Lake, N.J.), Ethanol (100%), Poly-L-lysine (#P8920, Sigma, St. Louis, Mo.), 50 Slide Stainless Steel Rack, #900401, and 50 Slide Glass Tank, #900401, (Wheaton Science Products, Millville, N.J.), Sodium Hydroxide, Stir Plate, Stir Bar, Platform Shaker, 30 Slide Rack, #196, plastic, and 30 slide Box, #195, plastic, (Shandon Lipshaw, Pittsburgh, Pa.), Sodium Chloride, Potassium Chloride, Sodium Phosphate Dibasic Heptahydrate, Potassium Phosphate Monobasic, Autoclave, 0.2 mm Filter: Nalgene, Centrifuge: Sorvall Super 20, Slide Box (plastic with no paper or cork liners), (e.g. #60-6306-02, PGC Scientific, Gaithersburg, Md.), 1L Glass Beaker; 1L Graduated Cylinder, 1M Sodium Borate (pH 8.0) (Dissolve 61.83 g of Boric acid in 900 ml of DEPC H2O. Adjust the pH to 8.0 with 1N NaOH. Bring volume up to one liter. Sterilize with a 0.2 micron filter and store at room temperature), Cleaning Solution (H2O 400 ml, Ethanol 600 ml, NaOH 100 g—Dissolve NaOH in H2O. Add ethanol and stir until the solution clears. If the solution does not clear, add H2O until it does), and Poly-L-lysine Solution (poly-L-lysine (0.1% w/v) 35 ml PBS 35 ml H2O 280 ml 350 ml)

[0152] First, the slides are placed into 50 slide racks and the racks are placed in glass tanks with 500 ml of cleaning solution. Gold Seal Slides are highly recommended, as they have been found to have consistently low levels of autofluorescence. It was important to wear powder free gloves when handling the slides to avoid contamination.

[0153] The tanks are placed on platform shakers for two hours at 60 rpm. After being shook, the cleaning solution was poured out, and the slides were then washed in H2O for three minutes. This wash was repeated four times. The slides were then transferred to 30 slide plastic racks and placed into small plastic boxes for coating. The slides were then submerged in 200 ml poly-L-lysine solution per box. The slide boxes were then placed on platform shaker for one hour at 60 rpm. The slides were rinsed three times with H2O, and submerged in H2O for one minute, and then centrifuged for two minutes at 400×g and the slide boxes used for coating were dried.

[0154] The slides were then placed back into the slide box used for coating and allowed to stand overnight before transferring to a new slide box for storage. This allowed the coating to dry before it was handled. The slides were allowed to age for two weeks on the bench, in a new slide box, before they were printing on. The coating dried slowly, becoming more hydrophobic with time.

[0155] Slide boxes used for long term storage should be plastic and free of cork lining. The glue used to affix the cork will leach out over time and give slides stored in these types of boxes a greasy film that has a high degree of autofluorescence. All glassware and racks used for slide cleaning and coating should be cleaned with highly purified H2O only, and detergent should not be used.

[0156] Once the slides were coated, they were printed. The variety of printers and pens for transferring PCR products from titer plates to slides precludes highly detailed descriptions of the process. The following steps provide a general description of the processing.

[0157] The print pens were pre-cleaned according to the manufacturer's specification. The printer slide deck was then loaded with poly-L-lysine coated slides from above. The plates containing the purified EST PCR products were thawed and centrifuged briefly, (about two minutes) at 1000 rpm in a horizontal microtiter plate rotor to remove condensation and droplets from the seals before being opening. 5 to 10 μl of the purified EST PCR products were transferred to a plate that served as the source of solution for the printer. Printing with quill-type pens usually requires that the volume of fluid in the print source was sufficiently low, so that when the pen was lowered to the bottom of the well, it was submerged in the solution to a depth of less than a millimeter. This keeps the pen from carrying a large amount of fluid on the outside of the pen shaft and producing variable, large spots on the first few slides printed.

[0158] A repetitive test print was run on the first slide. In this operation, the pens were loaded with the DNA solution, and then the pens serially deposited this solution on the first slide in the spotting pattern specified for the print. This test was run to check the size and shape of the specified spotting pattern, as well as its placement on the slide. It also served to verify that the pens were loading and spotting, and that a single loading produced as many spots as were required to deliver material to every slide in the printer. If one or more of the pens was not performing at the desired level, it was re-cleaned or substituted with another pen and tested again. If all pens were performing, the full print was carried out.

[0159] At the end of the print, the slides were removed from the printer, labeled with the print identifier and the slide number by writing on the edge of the slide with a diamond scribe and placed in a dust free slide box to age for one week. It was useful to etch a line, which outlined the printed area of the slide, onto the first slide. This served as a guide to locate the area after the slides have been processed, and the salt spots were then washed off.

[0160] The slides were placed, printed side face up, in a casserole dish and covered with cling wrap. The slides were then exposed to a 450 mJ dose of ultraviolet irradiation in the Stratalinker. Slides should have been and were aged at ambient temperature in a closed slide box for one week prior to blocking. The slides were then transferred to a 30 slide stainless steel rack and the rack was placed into a small glass tank. 6.0 g succinic anhydride was dissolved in 325 ml 1-methyl-2-pyrrolidinone in a glass beaker by stirring with a stir bar. Nitrile gloves were worn and the work was carried out in a chemical fume hood while handling 1-methyl-2-pyrrolidinone (a teratogen).

[0161] 25 ml 1M sodium borate buffer (pH 8.0) was added to the beaker. The solution was allowed to mix for a few seconds, then rapidly poured into a glass tank with slides. Succinic anhydride hydrolyzed quite rapidly once the aqueous buffer solution was added. To obtain quantitative passivation of the poly-L-lysine coating, it was critical that the reactive solution be brought in contact with the slides as quickly as possible. The glass tank was placed on a platform shaker in a fume hood for 20 minutes. Small particulates resulting from precipitation of reaction products may be visible in the fluid.

[0162] While the slides were incubating on the shaker a boiling H2O bath was prepared to denature the DNA on the slides. After the slides were incubated for 20 minutes, they were transferred into the boiling H2O bath. The heating element was immediately turned off after the slides were submerged in the bath. The slides were allowed to stand in the H2O bath for 2 minutes. The slides were then transferred into a glass tank filled with 100% ethanol and incubated for 4 minutes. The slides were removed and centrifuged at 400 rpm for 3 minutes in a horizontal microtiter plate rotor to dry the slides. The slides were then transferred to a clean, dust free slide box and allowed to stand overnight before being used for collection of gene expression data.

Example 2

Cell Culture and Tumor Samples

[0163] The source and other information for the cell lines and tumor samples used herein are described in Table 3 below for both the training set and the test samples.

4TABLE 3Supplement Table: Known Molecular Characteristics of Samples.Sample LabelHistological DiagnosisMolecular MarkersSource LabelSourceEWS-C1EWS-CEWS-FLI1, 10-6A4573NCIEWS-C2EWS-CEWS-FLI1, type ITC71NCIEWS-C3EWS-CEWS-FLI1, type ITC106NCIEWS-C4EWS-CEWS-FLI1, type I5838NCIEWS-C6EWS-CEWS-FLI1, type IA673NCIEWS-C7EWS-CEWS-FLI1, type IES-CL1MSKCCEWS-C8EWS-CEWS-FLI1, type ITC32NCIEWS-C9EWS-CEWS-FLI1, type IISK-ES-1ATCCEWS-C10EWS-CEWS-FLI1, type IISK-N-MCATCCEWS-C11EWS-CEWS-FLI1, type IIRDESATCCEWS-T1EWS-TEWS-FLI1, type IES20MSKCCEWS-T2EWS-TEWS-FLI1, type IIES13MSKCCEWS-T3EWS-TEWS-FLI1, type IES16MSKCCEWS-T4EWS-TEWS-FLI1, type IES17MSKCCEWS-T6EWS-TEWS-FLI1, 7-8ES22MSKCCEWS-T7EWS-TEWS-ERG, 7-9ES25MSKCCEWS-T9EWS-TEWS-FLI1, type I9602P006CHTNEWS-T11EWS-TEWS-FLI1, type I9703P152CHTNEWS-T12EWS-TEWS-FLI1, type I9704P218CHTNEWS-T13EWS-TEWS-FLI1, type IES23MSKCCEWS-T14EWS-TEWS-FLI1, type I9605P074CHTNEWS-T15EWS-TEWS-FLI1, type I9609P027CHTNEWS-T19EWS-TEWS-FLI1, type ISARC75CHTNRMS-C2ERMS-C—RDATCCRMS-C3ARMS-CNDRH4NCIRMS-C4ARMS-CPAX3-FKHRRH3NCIRMS-C5ARMS-CPAX3-FKHRRH5NCIRMS-C6ARMS-CPAX3-FKHRRH28NCIRMS-C7ARMS-CNDRH30NCIRMS-C8ERMS-C—CTRATCCRMS-C9ARMS-CPAX3-FKHRRH4NCIRMS-C10ARMS-CPAX3-FKHRRMS13NCIRMS-C11ERMS-C—TE671ATCCRMS-T1ARMS-TPAX3-FKHRRMS3MSKCCRMS-T2ARMS-TPAX3-FKHRRMS6MSKCCRMS-T3ERMS-T—RMS2MSKCCRMS-T4ERMS-Tno PAX-FKHRRMS5MSKCCRMS-T5ARMS-TPAX3-FKHRRMS10MSKCCRMS-T6RMS-TNDRT1CHTNRMS-T7ERMS-T—RT4CHTNRMS.T8RMS-TNDRT5CHTNRMS.T10RMS-TNDRT2CHTNRMS.T11ERMS-T—RHAB2CHTNNB-C1NB-CMYCN ampKCNRNCINB-C2NB-C—GICANNCINB-C3NB-C—SK-N-ASATCCNB-C4NB-CMYCN ampLAN5NCINB-C5NB-CMYCN ampSK-N-BE2ATCCNB-C6NB-CMYCN ampSK-N-DZATCCNB-C7NB-C—GICANNCINB-C8NB-C—NGPNCINB-C9NB-C—SH-SY5YATCCNB-C10NB-CMYCN ampSK-N-FIATCCNB-C11NB-CSingle copy MYCNSK-N-SHATCCNB-C12NB-C,MYCN ampCHP-134BNCIBL-C1BL-C—RAMOS (RAI)ATCCBL-C2BL-C—ST486ATCCBL-C3BL-C—CA46ATCCBL-C4BL-C—ST486ATCCBL-C5BL-C—RAJIATCCBL-C6BL-C—MC116ATCCBL-C7BL-C—DAUDIATCCBL-C8BL-C—SULTANATCCTeat1NB-CMYCN ampIMR32ATCCTeat2EWS-CNDCHOP1NCITest3Osteosarcoma-C—OsA-CIATCCTest4ARMS-T—ARMD1CHTNTest5Sarcoma—A204ATCCTest 6EWS-TEWS-FLI1, type I9608P053CHTNTest7BL-C—EB1ATCCTest8NB-C—SMSSANNCITest9Sk. Muscle—SkM1CHTNTest10ERMS-T—ERDM1CHTNTest11Prostate Ca-C—PC3ATCCTest12EWS-T—SARC67CHTNTest13Sk. Muscle—SkM2CHTNTest 14NB-TSingle copy MYCNNB3DZNSGTest 15BL-C—EB2ATCCTest 16NB-TSingle copy MYCNNB1DZNSGTest 17ARMS-T—ARMD2CHTNTest 18BL-C—GA10ATCCTest 19EWS-TNDET3CHTNTest 20EWS-TEWS-FLI1, type I9903P1339CHTNTest 21EWS-TEWS-FLI1, type IIES23MSKCCTest 22ERMS-T—ERMD2CHTNTest 23NB-TSingle copy MYCNNB2DZNSGTest 24ERMS-Tno PAX-FKHRRMS4MSKCCTest 25NB-TSingle copy MYCNNB4DZNSGSupplement Table: Known molecular characteristics of samples. Table labels and abbreviations are described in Table 1 in the manuscript. EWS and ARMS samples with noted translocations were verified by RT-PCR. ND; not determined. Amp.: amplification.

[0164] All the original histological diagnoses were made at tertiary hospitals, which have reference diagnostic laboratories with extensive experience in the diagnosis of pediatric cancers. Approximately 20% of all samples in each category were randomly selected, blinded and set aside for testing. To augment this test set, we added 4 neuroblastoma tumors and 5 non-SRBCT samples (also blinded to the authors performing the analysis). The EWSs had a spectrum of the expected translocations, and the RMSs were a mixture of both ARMS containing the PAX3-FKHR translocation and embryonal rhabdomyosarcoma (ERMS). The NBs contained both MYCN amplified and single copy samples. The BLs were cell lines derived from BL. Table 3 gives details of these samples as well.

[0165] This protocol details the methods used to extract RNA from cells, purify the RNA by a combination of phase extraction and chromatography, and prepare a labeled cDNA copy of the message fraction of the purified RNA. The protocol also describes the process of making fluorescent cDNA representations of the message pools within the isolated total RNA pools. This is accomplished by using the pure total RNA as a substrate for reverse transcription in the presence of nucleotides derivatized with either a Cy3 or a Cy5 fluorescent tag.

[0166] The materials, reagents, and solutions needed include: Trizol Reagent (#15596-018, Life Technologies, Rockville, Md.); RNeasy Maxi Kit (#75162, Qiagen, Valencia, Calif.); Chloroform; Ethanol (200 Proof USP Ethyl Alcohol); DPBS (Dulbecco's phosphate buffered saline); 3M sodium acetate (pH 5.2); dATP, dCTP, dGTP, dTTP, 100 mM each, store frozen, −20° C. (#27-2035-021247 , Pharmacia, Peapack, N.J.); pd(T)12-18 resuspend at 1 mg/ml, and store frozen −20° C. (#27-7858, Amersham Pharmacia Biotech); Anchored oligo primer (anchored; 5′-TTT TTT TTT TTT TTT TTT TTV N-3′); resuspend at 2 mg/ml, store frozen −20° C. (e.g. #3597-006, Genosys); CyTM3-dUTP, 1 mM, and CyTM5-dUTP, 1 mM, store −20° C., light sensitive; RNasin a Rnase inhibitor, store −20° C. (#N211A, Promega); SUPERSCRIPT™ II Rnase H Reverse Transcriptase Kit, store −20° C., (#18064-014, Life Technologies, Rockville, Md.); C0t-1 DNA, 1 mg/ml, store frozen −20° C. (#15279-011, Life Technologies, Rockville, Md.); 0.5M EDTA(pH 8.0); 1 N NaOH; 1M TRIS-HCL; (pH 7.5); TE pH 7.4; DEPC water 50×Tris Acetate Buffer; 15 ml round bottom; polypropylene centrifuge tubes; 50 ml conical polypropylene centrifuge tubes; 1.5 ml; Eppendorf tubes; 0.2 ml thin wall PCR tube; MicroCon 100 (Amicon Cat No. 42412); High speed centrifuge for 15 ml tubes; Clinical centrifuge with horizontal rotor for 50 ml conical tubes; Tissue homogenizer (e.g. Polytron PT1200 with Polytron-Aggregate-Dispergier-und-Mischtechnik 147a Ch6014 #027-30-520-0, Brinkmann Instruments Inc., Westbury, N.Y.); RPE Buffer (Add 4 volumes of ethanol per volume of RPE concentrate supplied in Quiagen Kit0; RW1 Buffer (Supplied in Qiagen Kit) 75% EtOH(Ethanol (100%) 375 ml, and DEPC H2O 125 ml for a total of 500 ml); 10× low T dNTP Mix (25 μL dGTP (100 mM), 25 μL dATP (100 mM), 25 μL dCTP (100 mM), 10 μL dTTP (100 mM), and 415 μL DEPC H2O for a total of 500 μL); 5×First Strand Buffer (Provided with Superscript II); TAE Buffer (50×Tris Acetate Electrophoresis Buffer 20 ml, and DEPC H2O 980 mL for a total of 1000 ml)

[0167] If the cells that were used were harvested from tissue culture, the cell pellet was washed twice in DPBS. If the cells that were used were from tissue culture, 1 ml of Trizol was added per 2×107 cells and mixed by shaking. If tissue was being used, 100 mg of frozen tissue was added directly to 4 ml of Trizol, and dissociate by homogenization with a rotating blade tissue homogenizer.

[0168] Whatever the source, 2/10 volume of chloroform was added to the cells and shook for 15 seconds, and then allowed to stand for 3 minutes, followed by centrifugation at 12,000×g for 15 minutes at 4° C. The supernatant was taken off and added to a polypropylene tube, while recording the volume of the supernatant.

[0169] Then 0.53 volumes of ethanol were slowly added to the supernatant while vortexing, this produced a final ethanol concentration of 35%. The ethanol was added drop by drop and allowed to mix completely with the supernatant before more ethanol is added. If a high local concentration of ethanol is produced, the RNA in that vicinity will precipitate.

[0170] The supernatant from an extraction of 2×107 to 1×108 cells was added to an RNeasy maxi column, which is seated in a 50 ml centrifuge tube. The tube was then centrifuged at 2880×g in a clinical centrifuge with a horizontal rotor at room temperature for 5 minutes. The flow-through was then poured back onto the top of the column and centrifuged again. This step is necessary because a significant amount of RNA is not captured by the column matrix in the first pass of the RNA containing solution through the column.

[0171] The flow-through was discarded and 15 ml of RW1 buffer was added to the column, followed by centrifugation at 2880×g for 5 minutes. The flow-through was discarded again and then 10 ml of RPE buffer was added, followed again by centrifugation at 2880×g for 5 minutes. Once again, the flow through was discarded and another 10 ml of RPE buffer was added, and the column was centrifuged at 2880×g for 10 minutes.

[0172] Next, the column was placed in a fresh 50 ml tube and add 1 ml of DEPC treated water from the kit was added to the column, and the column was allowed to stand for 1 minute. The column was then centrifuged at 2880×g for 5 minutes, and another 1 ml of water was added to the column. The column was allowed to stand for 1 minute, followed by centrifugation at 2880×g for 10 minutes.

[0173] Then, 400 μl portions of the column eluate was aliquotted to 1.5 ml Eppendorf tubes, to which 1/10 volume of 3M sodium acetate (pH 5.2) was added, along with 1 ml of ethanol. The tubes were then allowed to stand for 15 minutes, after which they were centrifuged at 12000×g at 4C for 15 minutes. The pellet was then washed two times in 75% EtOH and stored at −80° C.

[0174] The RNA was resuspended at approximately 1 mg/ml in DEPC H2O. It was then concentrated to greater than 7 mg/ml by centrifugation on a MicroCon 100 filter unit, centrifuged at 500×g, checking as necessary to determine the rate of concentration. This step removes many residual, small to medium sized, molecules that inhibit the reverse transcription reaction in the presence of fluorescently derivatized nucleotides. The concentration of RNA in the concentrated sample was then determined by spectrophotometry, and the sample was stored at −80° C.

[0175] If an anchored oligo dT primer was used, the primer was annealed to the RNA in the following 17 μl reaction (a 0.2 ml thin wall PCR tube was used so that incubations could be carried out in a PCR cycler):

5addition foraddition forComponentCy5 labelingCy3 labelingTotal RNA (>7 mg/ml)150-200μg50-80μgAnchored primer (2 μg/μl)1μl1μlDEPC H2Oto 17μlto 17μl

[0176] If an oligo dT(12-18) primer was used, the primer was annealed to the RNA in the following 17 μl reaction:

6addition foraddition forComponentCy5 labelingCy3 labelingTotal RNA (>7 mg/ml)150-200μg50-80μgdT(12-18) primer (1 μg/μl)1μl1μlDEPC H2Oto 17μlto 17μl

[0177] The incorporation rate for Cy5-dUTP is less than that of Cy3-dUTP, so more RNA is labeled to achieve more equivalent signal from each species.

[0178] It was then heated to 65° C. for 10 minutes and cooled on ice for 2 minutes. Then, 23 μl (8 μl of 5×first strand buffer, 4 μl of 10× low T dNTPs mix, 4 μl of Cy5 or Cy3 dUTP (1 mM), 4 μl of 0.1 M DTT, 1 μl of Rnasin (30 u/μl), and 2 μl of Superscript II (200 u/μl)) of reaction mixture containing either Cy5-dUTP or Cy3-dUTP nucleotides was added, mixed well by pipetting and a brief centrifuge spin was used to concentrate it in the bottom of the tube. Superscript polymerase is very sensitive to denaturation at air/liquid interfaces, so we were careful to suppress foaming in all handling of this reaction.

[0179] It was then incubated at 42° C. for 30 min., after which 2 μl Superscript II was added, making sure the enzyme was well mixed in the reaction volume and incubated at 42O C for 30-60 min. Then, 5 μl of 0.5M EDTA was added, making sure the reaction was stopped with EDTA before adding NaOH (the next step), since nucleic acids precipitate in alkaline magnesium solutions.

[0180] Then, 10 μl 1N NaOH was added and it was incubated at 65° C. for 60 minutes to hydrolyze residual RNA, after which it was cooled to room temperature. The purity of the sodium hydroxide solution used in this step is crucial. Slight contamination or long storage in a glass vessel can produce a solution that will degrade the Cy5 dye molecule, turning the solution yellow. Some researchers achieve better results by reducing the time of hydrolysis to 30 minutes.

[0181] It was then neutralized by adding 25 μl of 1M Tris-HCl (pH 7.5). Then, the labeled cDNA was desalted by adding the neutralized reaction, 400 μl of TE pH 7.5 and 20 μg of human Cot-1 DNA to a MicroCon 100 cartridge. It was then pipetted to mix, and spun for 10 minutes at 500×g. 200 μl TE pH 7.5 was added, and the solution was then concentrated to about 20-30 μl (approximately 8-10 min at 500×g). Alternatively, a smaller pore MicroCon 30 was used to speed the concentration step. In this case, the first wash was centrifuged for approximately 4.5 minutes at 16,000×g and the second (200 μl wash) for about 2.5 minutes at 16,000×g.

[0182] It was then recovered by inverting the concentrator over a clean collection tube and spinning for 3 min at 500×g. In some cases, the cy5 labeled cDNA formed a gelatinous blue precipitate that was recovered in the concentrated volume. The presence of this material signaled the presence of contaminants. The more extreme the contamination, the greater the fraction of cDNA which will be captured in this gel. Even if heat solubilized, this material tends to produce uniform, non-specific binding to the DNA targets. When concentrating by centrifugal filtration, the times required to achieve the desired final volume were variable. Overly long spins can remove nearly all the water from the solution being filtered. When fluor-tagged nucleic acids are concentrated onto the filter in this fashion, they are very hard to remove, so it is necessary to approach the desired volume by conservative approximations of the required spin times. If control of volumes proves difficult, the final concentration can be achieved by evaporating liquid in the speed-vac. Vacuum evaporation, if not to dryness, does not degrade the performance of the labeled cDNA.

[0183] Next, a 2-3 μl aliquot of the Cy5 labeled cDNA was taken for analysis, leaving 18-28 μl for hybridization. This probe was run on a 2% agarose gel (6 cm wide×8.5 cm long, 2 mm wide teeth) in Tris Acetate Electrophoresis Buffer (TAE). For maximal sensitivity when running samples on a gel for fluor analysis, a loading buffer with minimal dye was used and no ethidium bromide was added to the gel or running buffer.

[0184] The gel was then scanned on a Molecular Dynamics Storm fluorescence scanner (setting: red fluorescence, 200 micron resolution, 1000 volts on PMT). Successful labeling produces a dense smear of probe from 400 bp to >1000 bp, with little pile-up of low molecular weight transcripts. Weak labeling and significant levels of low molecular weight material indicates a poor labeling. A fraction of the observed low molecular weight material is unincorporated fluor nucleotide.

[0185] Next, the fluorescent cDNA had to be hybridized to the microarray. The volume of hybridization solution required was first determined. The rule of thumb is to use 0.033 μl for each mm 2 of slide surface area covered by the cover slip used to cover the array. An array covered by a 24 mm by 50 mm cover slip required 40 μl of hybridization solution. The volume of the hybridization solution is critical. When too little solution is used, it is difficult to seat the cover slip without introducing air bubbles over some portion of the arrayed ESTs, and the cover slip will not sit at a uniform distance from the slide. If the cover slip is bowed toward the slide in the center, there will be less labeled cDNA in that area and hybridization will be non-uniform. When too much volume is applied, the cover slip will move easily during handling, leading to misplacement relative to the arrayed ESTs, and non-hybridization in some areas of the array.

[0186] For a 40 μl hybridization, the Cy3 and Cy5 labeled cDNAs were pooled into a single 0.2 ml thin wall PCR tube and the volume was adjusted to 30 μl by either adding DEPC H2O, or removing water in a SpeedVac. If a vacuum device was used to remove water, high heat or heat lamps were not used to accelerate evaporation because the fluorescent dyes could be degraded.

[0187] For a 40 μl hybridization the following components were combined:

7High Sample BlockingHigh Array BlockingCy5 + Cy3 probe30 μl28 μlPoly d(A) (8 mg/ml) 1 μl 2 μlYeast tRNA (4 mg/ml) 1 μl 2 μlHuman C0t-1 DNA 1 μl 0 μl(10 mg/ml)20x SSC 6 μl 6 μl50x Denhardt's 1 μl (optional) 2 μlblocking solutionTotal volume40 ul40 ul

[0188] Arrays and samples can vary somewhat, making it necessary to vary the composition of the hybridization cocktail. In cases where there is residual hybridization to control repeat DNA samples on the array, more C0t-1 DNA was used, as in the High Sample Blocking formulation. When there is diffuse background or a general haze on all of the array elements, more of the non-specific blocker components was used, as in the High Array Blocking formulation.

[0189] The components were mixed well by pipetting, heated at 98° C. for 2 minutes in a PCR cycler, cooled quickly to 25° C. and 0.6 ul of 10% SDS was added. It was then centrifuged for 5 min at 14,000×g. The fluor labeled cDNAs have a tendency to form small, very fluorescent, aggregates which result in bright, punctate background on the array slide. Hard centrifugation will pellet these aggregates, allowing you to avoid introducing them to the array.

[0190] The labeled cDNA was applied to a 24 mm×50 mm glass cover slip and then touched with the inverted microarray. Applying the hybridization mix to the array and cover slipping it is an operation which requires some dexterity to get the positioning of the cover slip and the exclusion of air bubbles just right. It was helpful to practice this operation with buffer and plain slides before attempting actual samples. The hybridization solution was added to the cover slip first, since some aggregates of fluor remain in the solution and will bind to the first surface they touch.

[0191] The slide was then placed in a microarray hybridization chamber, 5 μl of 3×SSC was added to the reservoir, if the chamber provided one, or at the scribed end of the slide and the chamber was sealed. The chamber was submerged in a 65° C. water bath and the slide was allowed to hybridize for 16-20 hours. There are a wide variety of commercial hybridization chambers. It was worthwhile to prepare a mock hybridization with a blank slide, load it in the chamber and incubate it to test for leaks, or drying of the hybridization fluid, either of which cause severe fluorescent noise on the array.

[0192] Next, the unbound fluorescent cDNA was washed off. The hybridization chamber was removed from the water bath, cooled and carefully dried off. The chamber was unsealed and the slide was removed. As there may be negative pressure in the chamber after cooling, it is necessary to remove water from around the seals so that it was not pulled into the chamber and onto the slide when the seals are loosened.

[0193] The slide was placed, with the cover slip still affixed, into a Coplin jar filled with 0.5×SSC/0.01% SDS wash buffer. The cover slip was allowed to fall from the slide and then removed from the jar with a forceps. The slide was allowed to wash for 2-5 minutes. The slide was transferred to a fresh Coplin jar filled with 0.06×SSC, and allowed to wash for 2-5 minutes. The sequence of washes may need to be adjusted to allow for more aggressive noise removal, depending on the source of the sample RNA. Useful variations are to add a first wash which is 0.5×SSC/0.1% SDS or to repeat the normal first wash twice.

[0194] The slide was then transferred to a slide rack and centrifuged at low rpm (700-1000) for 3 minutes in a clinical centrifuge equipped with a horizontal rotor for microtiter plates. If the slide is simply air dried, it frequently acquires a fluorescent haze. Centrifuging off the liquids results in a lower fluorescent background. As the rate of drying can be quite rapid, it is suggested that the slide be placed in the centrifuge immediately upon removal from the Coplin jar.

[0195] Image analysis was performed using DeArray software (Chen, Y., Dougherty, E. R. and Bittner, M. L. Ratio-based decisions and the quantitative analysis of cDNA microarray images, Biomedical Optics 2, 364-374 (1997).

Example 3

Data Analysis

[0196] To calibrate ANN models to recognize cancers in each of the four SRBCT categories, gene-expression data from cDNA microarrays as obtained via Examples 1 and 2 above were used. The 63 training samples included both tumor biopsy material (13 EWS and 10 RMS) and cell lines (10 EWS, 10 RMS, 12 NB and 8 Burkitt lymphomas (BL; a subset of BL). For two samples, ST486 (BL-C2 and C4) and GICAN (NB-C2 and C7), we performed two independent microarray experiments to test the reproducibility of the experiments and these were subsequently treated as separate samples.

[0197] Genes were filtered based on the intensity of the fluorescence gathered from the cDNA microarray. This type of filtering was designed to remove spots for which image analysis failed. Genes were filtered by requiring that a gene have a red intensity greater than 20 across all experiments. The number of genes that passed this filter was 2308. Each slide was normalized across all experiments. Therefore the expression level was based on a relative (or normalized) red intensity (RRI) for each gene, RRI=mean intensity of that spot/mean intensity of filtered genes. The natural logarithm (ln) of RRI was used as a measure of the expression levels.

[0198] Principal component analysis (PCA) further reduced the dimensionality. To allow for a supervised regression model with no over-training (when we have low number of parameters as compared to the number of samples), the dimensionality of the samples was reduced by PCA using centralized ln (RRI) values as input. Thus each sample was represented by 88 numbers, which are the results of projection of the gene expressions using PCA eigenvectors. We used the 10 dominant PCA components for subsequent analysis. These 10 dominant components contained 63% of the variance in the data matrix. The remaining PCA components contained variance unrelated to separating the four cancers.

[0199] We classified the training samples in the 4 categories using a 3-fold cross validation procedure: the 63 training (labeled) samples were randomly shuffled and split into 3 equally sized groups. Each linear ANN model was then calibrated with the 10 PCA input variables (normalized to centralized z-scores) using 2 of the groups, with the third group reserved for testing predictions (validation). This procedure was repeated 3 times, each time with a different group used for validation. The random shuffling was redone 1250 times and for each shuffling we analyzed 3 ANN models. Thus, in total, each sample belonged to a validation set 1250 times, and 3750 ANN models were calibrated. The three-fold cross-validation procedure produced at total of 3750 ANN models, and the training and validation was successful, see FIG. 5.

[0200] In addition, there was no sign of ‘over-training’ of the models, as would be shown by a rise in the summed square error for the validation set with increasing training iterations or ‘epochs’, see FIG. 4.

[0201] For each diagnostic category (EWS, RMS, NB or BL), each ANN model gave an output between 0 (not this category) and 1 (this category). The 1250 outputs for each validation sample were used as a committee as follows. We calculated the average of all the predicted outputs (a committee vote) and then a sample was classified as a particular cancer if it received the highest committee vote for that cancer. In clinical settings, it is important to be able to reject a diagnostic classification including samples not belonging to any of the four diagnoses. Therefore, to be able to reject classification we did as follows. A squared Euclidean distance was computed for each cancer type, between the committee vote for a sample and the ‘ideal’ output for that cancer type; normalized such that it is unity between cancer types as described above. Using the 1250 ANN models for each validation sample we constructed for each cancer type an empirical probability distribution for the distances. Using these distributions, samples are only diagnosed as a specific cancer if they lie within the 95th percentile. All 3750 models were used to classify the additional 25 test samples.

[0202] Using these ANN models, all of the 63 training samples were correctly assigned/classified to their respective categories, having received the highest committee vote (average output) for that category.

[0203] Diagnostic results for the 63 training samples can be seen in Table 4 below.

8TABLE 4Training sample characteristics

Source label refers to the original name of the sample as labeled by the source. Histological diagnosis is defined as cancer type suffixed with —T for a tumor sample and —C for a cell line. Highlighted in gray is the ANN classification of the samples. NCI: National Cancer Institute, National Institutes of Health, ATCC: American Type Culture Collection, MSKCC: Memorial Sloan-Kettering Cancer Center, CHTN: Cooperative Human Tissue Network.

Example 4

Optimization of Genes Utilized for Classification

[0204] The contribution of each gene to the classification by the ANN models was determined by measuring the sensitivity of the classification to a change in the expression level of each gene, using the 3750 previously calibrated models.

[0205] The sensitivity to the different genes was determined by the absolute value of the partial derivative of the output with respect to the gene expressions, averaged over samples and ANN models. A large sensitivity implied that changing the expression influences the output significantly.

[0206] In this way the genes were ranked according to their significance for the classification. The top 200 ranked genes are seen below in Table 5. The weight of each gene is the sensitivity measurment as calculated by Equation (2), page 19 above

9TABLE 5UniqueUnigeneRankImage_IdName of GenenumberWeight1296448“insulin-like growth factor 2Hs.2516641.00 + −0.03(somatomedin A)”2207274“insulin-like growth factor 2Hs.2516640.97 + −0.03(somatomedin A)”3295985“Homo sapiens cDNA FLJ20653 fis,Hs.1800590.87 + −0.02clone KAT01739”441591“meningioma (disrupted in balancedHs.2685150.86 + −0.02translocation) 1”5365826“growth arrest-specific 1”Hs.650290.86 + −0.026714453“interleukin 4 receptor”Hs.755450.85 + −0.027812965“v-myc avian myelocytomatosis viralHs.790700.81 + −0.02oncogene homolog”8486787“calponin 3, acidic”Hs.1946620.81 + −0.029244618“ESTs”Hs.154630.80 + −0.0210417226“v-myc avian myelocytomatosis viralHs.790700.80 + −0.02oncogene homolog”11840942“major histocompatibility complex,Hs.8140.79 + −0.02class II, DP beta 1”12770394“Fc fragment of IgG, receptor,Hs.1607410.78 + −0.02transporter, alpha”13812105“ALL1-fused gene from chromosomeHs.758230.76 + −0.021q”14357031“tumor necrosis factor, alpha-inducedHs.293520.75 + −0.02protein 6”15629896“microtubule-associated protein 1B”Hs.1030420.74 + −0.0216308163“ESTs”Hs.845200.73 + −0.021743733“glycogenin 2”Hs.585890.72 + −0.0218489631“chondroitin sulfate proteoglycan 2Hs.818000.71 + −0.02(versican)”19866702“protein tyrosine phosphatase, non-Hs.2115950.71 + −0.02receptor type 13 (APO-1/CD95 (Fas)-associated phosphatase)”20377461“caveolin 1, caveolae protein, 22 kD”Hs.2816210.70 + −0.0221324494“heat shock 27 kD protein 2”Hs.788460.69 + −0.022280109“major histocompatibility complex,Hs.1982530.69 + −0.02class II, DQ alpha 1”2339093“methionine aminopeptidase; eIF-2-Hs.789350.69 + −0.01associated p67”2482225“secreted frizzled-related protein 1”Hs.73060.67 + −0.0125308231“Homo sapiens cDNA FLJ20153 fis,Hs.1098050.67 + −0.02clone COL08656, highly similar toAJ001381 Homo sapiens incompletecDNA for a mutated allele”26211758“ribosomal protein S23”Hs.34630.67 + −0.01271E+06“troponin T1, skeletal, slow”Hs.739800.66 + −0.0228878280“collapsin response mediator protein 1”Hs.1553920.65 + −0.0229383188“recoverin”Hs.805390.64 + −0.0130795877“serum-inducible kinase”Hs.38380.64 + −0.0131784593“ESTs”Hs.68380.63 + −0.0132135688“GATA-binding protein 2”Hs.7600.62 + −0.0133325182“cadherin 2, N-cadherin (neuronal)”Hs.1610.62 + −0.0134461425“myosin, light polypeptide 4, alkali;Hs.1541560.61 + −0.01atrial, embryonic”351E+06“transducin-like enhancer of split 2,Hs.1730630.61 + −0.02homolog of Drosophila E(sp1)”36298062“troponin T2, cardiac”Hs.897490.61 + −0.0237841641“cyclin D1 (PRAD1: parathyroidHs.829320.61 + −0.01adenomatosis 1)”38745343“regenerating islet-derived 1 alphaHs.10320.60 + −0.01(pancreatic stone protein, pancreaticthread protein)”39755599“interferon induced transmembraneHs.1463600.59 + −0.02protein 1 (9-27)”40809901“collagen, type XV, alpha 1”Hs.831640.59 + −0.0141859359“quinone oxidoreductase homolog”Hs.506490.59 + −0.0142784224“fibroblast growth factor receptor 4”Hs.1659500.59 + −0.024342558“glycine amidinotransferase (L-Hs.753350.58 + −0.01arginine: glycine amidinotransferase)”44183337“major histocompatibility complex,Hs.775220.58 + −0.01class II, DM alpha”45289645“amyloid beta (A4) precursor-likeHs.745650.58 + −0.01protein 1”46377048“Homo sapiens cDNA FLJ20153 fis,Hs.1098050.57 + −0.01clone COL08656, highly similar toAJ001381 Homo sapiens incompletecDNA for a mutated allele”47122159“collagen, type III, alpha 1 (Ehlers-Hs.1195710.57 + −0.01Danlos syndrome type IV, autosomaldominant)”48245330“insulin-like growth factor 2Hs.2516640.57 + −0.01(somatomedin A)”49814260“follicular lymphoma variantHs.740500.57 + −0.01translocation 1”50824602“interferon, gamma-inducible proteinHs.1555300.57 + −0.0116”5144563“growth associated protein 43”Hs.790000.56 + −0.0152767495“GLI-Kruppel family member GLI3Hs.729160.56 + −0.01(Greig cephalopolysyndactylysyndrome)”53769716“neurofibromin 2 (bilateral acousticHs.9020.55 + −0.01neuroma)”54486110“profilin 2”Hs.917470.55 + −0.01551E+06“pim-2 oncogene”Hs.802050.55 + −0.0156756556“complement component 1 inhibitorHs.1512420.54 + −0.01(angioedema, hereditary)”57377731“glutathione S-transferase M5”Hs.756520.54 + −0.015852076“olfactomedin related ER localizedHs.743760.54 + −0.02protein”59810057“cold shock domain protein A”Hs.11390.54 + −0.0160233721“insulin-like growth factor bindingHs.1620.54 + −0.01protein 2 (36 kD)”61293500“ESTs”Hs.497140.54 + −0.016275254“cysteine and glycine-rich protein 2Hs.105260.54 + −0.01(LIM domain only, smooth muscle)”63377468“sprouty (Drosophila) homolog 1Hs.880440.53 + −0.01(antagonist of FGF signaling)”64809910“interferon induced transmembraneHs.1822410.53 + −0.01protein 3 (1-8U)”65395708“dihydropyrimidinase-like 4”Hs.1000580.53 + −0.0166416959“nuclear factor I/B”Hs.332870.53 + −0.01671E+06“antigen identified by monoclonalHs.1775430.52 + −0.01antibodies 12E7, F21 and O13”68609663“protein kinase, cAMP-dependent,Hs.774390.51 + −0.01regulatory, type II, beta”69212640“Rho GTPase activating protein 4”Hs.31090.51 + −0.0170130057“ESTs”Hs.230570.51 + −0.0171563673“antiquitin 1”Hs.742940.51 + −0.0172770059“heparan sulfate proteoglycan 2Hs.2115730.51 + −0.01(perlecan)”73782503“Homo sapiens clone 23716 mRNAHs.122140.50 + −0.01sequence”74292522“ESTs”Hs.380220.50 + −0.0175365515“fibroblast growth factor 7 (keratinocyteHs.1645680.50 + −0.01growth factor)”761E+06“cysteine-rich protein 1 (intestinal)”Hs.174090.50 + −0.0177767183“hematopoietic cell-specific LynHs.146010.50 + −0.01substrate 1”78811000“lectin, galactoside-binding, soluble, 3Hs.793390.50 + −0.01binding protein (galectin 6 bindingprotein)”79308497“KIAA0467 protein”Hs.111470.49 + −0.018080338“selenium binding protein 1”Hs.78330.49 + −0.0181200814“membrane metallo-endopeptidaseHs.12980.49 + −0.01(neutral endopeptidase, enkephalinase,CALLA, CD10)”82898219“mesoderm specific transcript (mouse)Hs.792840.49 + −0.01homolog”83796258“sarcoglycan, alpha (50 kD dystrophin-Hs.999310.49 + −0.01associated glycoprotein)”84377671“integrin, alpha 7”Hs.743690.48 + −0.0185839736“crystallin, alpha B”Hs.19400.48 + −0.0186208718“annexin A1”Hs.782250.48 + −0.018732299“inositol(myo)-1(or 4)-Hs.57530.48 + −0.01monophosphatase 2”88246377“EST”Hs.1026700.48 + −0.0189413633“EST”—0.48 + −0.0190140806“peptidylglycine alpha-amidatingHs.839200.47 + −0.01monooxygenase”91294496“ESTs”Hs.230370.47 + −0.0192755750“non-metastatic cells 2, proteinHs.2751630.47 + −0.01(NM23B) expressed in”93811108“thyroid hormone receptor interactor 6”Hs.1194980.47 + −0.0194246035“ESTs”Hs.780260.47 + −0.0195796904“pleomorphic adenoma gene-like 1”Hs.758250.47 + −0.0196788107“bridging integrator 1”Hs.1931630.47 + −0.0197714106“plasminogen activator, urokinase”Hs.772740.47 + −0.0198842918“FERM, RhoGEF (ARHGEF) andHs.1837380.47 + −0.01pleckstrin domain protein 1(chondrocyte-derived)”99788472“nucleobindin 1”Hs.1726090.47 + −0.0110052096“platelet-derived growth factor receptor,Hs.746150.46 + −0.01alpha polypeptide”101823886“Smooth muscle myosin heavy chainHs.20940.46 + −0.01isoform SMemb [human, umbilical cord,fetal aorta, mRNA Partial, 971 nt]”102782193“thioredoxin”Hs.761360.46 + −0.01103214990“gelsolin (amyloidosis, Finnish type)”Hs.805620.46 + −0.01104144932“deleted in oral cancer (mouse,Hs.34360.46 + −0.01homolog) 1”105782811“high-mobility group (nonhistoneHs.1398000.46 + −0.01chromosomal) protein isoforms I and Y”106813698“sprouty (Drosophila) homolog 2”Hs.186760.45 + −0.01107212542“Homo sapiens mRNA; cDNAHs.218510.45 + −0.01DKFZp586J2118 (from cloneDKFZp586J2118)”108204545“ESTs”Hs.89660.45 + −0.01109341588“CGI-119 protein”Hs.256150.45 + −0.01110297392“metallothionein 1L”Hs.943600.45 + −0.01111813841“plasminogen activator, tissue”Hs.2744040.45 + −0.01112491692“collagen, type IV, alpha 1”Hs.1191290.44 + −0.01113142134“hypothetical protein FLJ20185”Hs.2729720.44 + −0.01114214572“ESTs”Hs.2804600.44 + −0.01115878182“alpha-2-macroglobulin”Hs.745610.44 + −0.01116360047“SWI/SNF related, matrix associated,Hs.770690.44 + −0.01actin dependent regulator of chromatin,subfamily d, member 3”117878652“procollagen C-endopeptidaseHs.2020970.44 + −0.01enhancer”118450152“Meis (mouse) homolog 3”Hs.1173130.44 + −0.0111945542“Human insulin-like growth factorHs.1033910.44 + −0.01binding protein 5 (IGFBP5) mRNA”120742132“interferon-stimulated protein, 15 kDa”Hs.8330.44 + −0.0112182903“TAP binding protein (tapasin)”Hs.1796000.44 + −0.01122773215“runt-related transcription factor 1Hs.1299140.44 + −0.01(acute mycloid leukemia 1; aml1oncogene)”123789253“presenilin 2 (Alzheimer disease 4)”Hs.253630.44 + −0.01124814526“seb4D”Hs.2363610.44 + −0.01125435953“inositol 1,4,5-triphosphate receptor,Hs.775150.44 + −0.01type 3”126245860“Homo sapiens mRNA; cDNAHs.1811040.44 + −0.01DKFZp564H1916 (from cloneDKFZp564H1916)”Hs.1811040.44 + −0.01127159455“similar to vaccinia virus HindIII K4LHs.745730.44 + −0.01ORF”128220096“—”—0.44 + −0.0112945291“dentatorubral-pallidoluysian atrophyHs.1694880.43 + −0.01(atrophin-1)”130241412“E74-like factor 1 (ets domainHs.1543650.43 + −0.01transcription factor)”1311E+06“matrix metalloproteinase 2 (gelatinaseHs.1113010.43 + −0.01A, 72 kD gelatinase, 72 kD type IVcollagenase)”132250654“secreted protein, acidic, cysteine-richHs.1117790.43 + −0.01(osteonectin)”133343867“allograft inflammatory factor 1”Hs.763640.43 + −0.01134234237“Pirin”Hs.2796630.42 + −0.01135713922“glutathione S-transferase M1”Hs.2786330.42 + −0.01136823928“glutathione S-transferase theta 2”Hs.15810.42 + −0.01137810504“proteolipid protein 2 (colonicHs.774220.42 + −0.01epithelium-enriched)”138788511“ribosomal protein S6 kinase, 90 kD,Hs.1499570.41 + −0.01polypeptide 1”139471266“DiGeorge syndrome critical regionHs.1539100.41 + −0.01gene 6”140299737“Homo sapiens clone 24411 mRNAHs.209520.41 + −0.01sequence”141740554“Homo sapiens mRNA; cDNAHs.2636710.41 + −0.01DKFZp434I0812 (from cloneDKFZp434I0812); partial cds”142754600“nuclear factor I/X (CCAAT-bindingHs.358410.41 + −0.01transcription factor)”143151261“ESTs”Hs.2379710.41 + −0.01144815239“Rho guanine nucleotide exchangeHs.2522800.41 + −0.01factor (GEF) 1”145624360“proteasome (prosome, macropain)Hs.1800620.41 + −0.01subunit, beta type, 8 (largemultifunctional protease 7)”146213136“BTG family, member 2”Hs.754620.41 + −0.0114721652“catenin (cadherin-associated protein),Hs.1784520.41 + −0.01alpha 1 (102 kD)”148813266“four and a half LIM domains 1”Hs.2390690.41 + −0.01149236282“Wiskott-Aldrich syndrome (ecezema-Hs.21570.41 + −0.01thrombocytopenia)”150755228“dynamin 1”Hs.1661610.41 + −0.01151161993“CCAAT/enhancer binding proteinHs.990290.41 + −0.01(C/EBP), beta”152358433“retinoid X receptor, gamma”Hs.265500.41 + −0.01153841620“dihydropyrimidinase-like 2”Hs.1733810.41 + −0.01154293859“Putative prostate cancer tumorHs.711190.41 + −0.01suppressor”155190887“myeloid differentiation primaryHs.821160.41 + −0.01response gene (88)”156362483“spectrin, beta, non-erythrocytic 1”Hs.1071640.41 + −0.01157139376“hypothetical protein”Hs.919730.40 + −0.01158786084“chromobox homolog 1 (DrosophilaHs.772540.40 + −0.01HP1 beta)”159193182“transfoming, acidic coiled-coilHs.1731590.40 + −0.01containing protein 1”160768246“glucose-6-phosphate dehydrogenase”Hs.802060.40 + −0.01161774502“protein tyrosine phosphatase, non-Hs.620.40 + −0.01receptor type 12”162868304“actin, alpha 2, smooth muscle, aorta”Hs.1958510.40 + −0.01163379708“chromodomain helicase DNA bindingHs.256010.40 + −0.01protein 3”164504791“glutathione S-transferase A4”Hs.1699070.40 + −0.01165755506“annexin A4”Hs.778400.40 + −0.011661E+06“homeo box B7”Hs.8190.40 + −0.01167824704“mannose phosphate isomerase”Hs.756940.40 + −0.01168770014“T cell receptor alpha locus”Hs.746470.40 + −0.0116922040“matrix metalloproteinase 9 (gelatinaseHs.1517380.40 + −0.01B, 92 kD gelatinase, 92 kD type IVcollagenase)”17066714“peanut (Drosophila)-like 2”Hs.1555240.40 + −0.01171172783“hypothetical protein FLJ10390”Hs.1334750.40 + −0.011722734345“v-yes-1 Yamaguchi sarcoma viralHs.1941480.40 + −0.01oncogene homolog 1”173323371“amyloid beta (A4) precursor proteinHs.1774860.39 + −0.01(protease nexin-II, Alzheimer disease)”174344134“immunoglobulin lambda-likeHs.1701160.39 + −0.01polypeptide 3”175291756“tubulin, beta, 5”Hs.1080140.39 + −0.0117647475“p53 inducible protein”Hs.2585030.39 + −0.01177760299“Dickkopf gene 3”Hs.49090.39 + −0.0117824415“tumor protein p53 (Li-FraumeniHs.18460.39 + −0.01syndrome)”179727251“CD9 antigen (p24)”Hs.12440.39 + −0.01180770868“NGFI-A binding protein 2 (ERG1Hs.1592230.39 + −0.01binding protein 2)”181364934“death-associated protein kinase 1”Hs.1539240.39 + −0.011821E+06“creatine kinase, brain”Hs.1737240.39 + −0.01183769959“collagen, type IV, alpha 2”Hs.756170.39 + −0.01184144797“a disintegrin-like and metalloproteaseHs.82300.39 + −0.01(reprolysin type) with thrombospondintype 1 motif, 1”185108351“Homo sapiens cDNA FLJ11302 fis,Hs.137810.38 + −0.01clone PLACE1009971”18651448“activating transcription factor 3”Hs.4600.38 + −0.01187301122“extracellular matrix protein 1”Hs.810710.38 + −0.01188814798“aldehyde dehydrogenase 6”Hs.757460.38 + −0.01189788695“troponin T3, skeletal, fast”Hs.734540.38 + −0.01190769028“mesenchyme homeo box 1”Hs.4380.38 + −0.01191811028“cathepsin D (lysosomal aspartylHs.795720.38 + −0.01protease)”192196992“aldo-keto reductase family 1, memberHs.2753740.38 + −0.01C1 (dihydrodiol dehydrogenase 1; 20-alpha (3-alpha)-hydroxysteroiddehydrogenase)”193586854“CGI-119 protein”Hs.256150.38 + −0.011941E+06“ATPase, Na+/K+ transporting, alpha 1Hs.1907030.38 + −0.01polypeptide”195752652“transcription factor 7-like 2 (T-cellHs.1544850.38 + −0.01specific, HMG-box)”196813168“ESTs”Hs.598960.38 + −0.01197143306“lymphocyte-specific protein 1”Hs.567290.38 + −0.01198810551“low density lipoprotein-related proteinHs.891370.37 + −0.011 (alpha-2-macroglobulin receptor)”199882506“lysyl oxidase-like 2”Hs.833540.37 + −0.01200141768“v-erb-b2 avian erythroblastic leukemiaHs.1736640.37 + −0.01viral oncogene homolog 2(neuro/glioblastoma derived oncogenehomolog)”

[0207] The ANN analysis utilized in this example has lead to the identification of genes specific for each of the four cancers (EWS, RMS, NB and BL), with implications for biology and therapy, a strength of this method is its lack of requirement for genes to be exclusively associated with a single cancer type. The top 96 discriminating genes included not only those that had high (61) or low levels (12 BLs and 1 EWS) of expression in one particular cancer, but also genes that were differentially expressed in two diagnostic categories as compared to the remaining two. The genes that are not exclusively expressed in two cancer types can be used for diagnosis (to separate these two from the other cancers) and are potential targets for these both these cancers.

[0208] As expected, our method identified genes related to tumor histogenesis, but includes genes that may not normally be expressed in the corresponding mature tissue. Of the 16 genes highly expressed only in EWS, two (MIC2 and GYG2) have been previously described. Of the 14 genes that have not previously been reported to be highly expressed in EWS, four (TUBB5, ANXA1, NOE1 and GSTM5) were neural specific genes lending more credence to the proposed neural histogenesis of EWS. Twenty genes were highly expressed only in RMS, including 8 specific for muscle tissue and 5 (FGFR4, IGF2, MYL4, ITGA7, and IGFBP5) related to myogenesis. Among the latter, IGF2, MYL4 and IGFBP5 expression has been reported in RMS, and only ITGA7 and IGFBP5 were found to be expressed in our two normal muscle samples, making the other genes good targets for therapy. Of the genes specifically expressed in a cancer type, 41 have not been previously reported, including 7 ESTs with no current known function (starred * in FIG. 8). All of these warrant further study and may provide new insights into the biology and importantly new targets for the treatment of these cancers. All or a combination of these genes can be used for designing drugs (small molecule screening), or be used in designing vaccines for cancer therapy.

[0209] An ANN method of the invention can also be used to rank genes that are important for each of the four SRBCTs: neuroblastoma (NB), rhabdomyosarcoma (RMS), Burkitt's (BL) and the Ewing family of tumors (EWS). Tables 6 through 9 show weighted gene lists (i.e the most important genes in order of importance) for NB, RMS, BL, and EWS respectively. The genes in each of these tables are more highly ranked and are highly expressed in each of the individual cancers.

10TABLE 6Ranked genes for Neuroblastoma (NB)RankClone IdGeneDescriptionUnigeneWeight2812105“ALL1-fused gene from chromosome 1q”Hs.758230.96 + −0.036325182“cadherin 2, N-cadherin (neuronal)”Hs.1610.84 + −0.038629896“microtubule-associated protein 1B”Hs.1030420.82 + −0.0310878280“collapsin response mediator protein 1”Hs.1553920.80 + −0.0311308231“Homo sapiens cDNA FLJ20153 fis, cloneHs.1098050.78 + −0.03COL08656, highly similar to AJ001381 Homosapiens incomplete cDNA for a mutated allele”13295985“Homo sapiens cDNA FLJ20653 fis, cloneHs.1800590.75 + −0.03KAT01739”1444563“growth associated protein 43”Hs.790000.75 + −0.0219135688“GATA-binding protein 2”Hs.7600.68 + −0.0221383188“recoverin”Hs.805390.64 + −0.0223395708“dihydropyrimidinase-like 4”Hs.1000580.63 + −0.022582225“secreted frizzled-related protein 1”Hs.73060.62 + −0.0226486787“calponin 3, acidic”Hs.1946620.62 + −0.0228377048“Homo sapiens cDNA FLJ20153 fis, cloneHs.1098050.62 + −0.02COL08656, highly similar to AJ001381 Homosapiens incomplete cDNA for a mutated allele”30486110“profilin 2”Hs.917470.59 + −0.0232768246“glucose-6-phosphate dehydrogenase”Hs.802060.58 + −0.0234786084“chromobox homolog 1 (Drosophila HP1Hs.772540.57 + −0.02beta)”36211758“ribosomal protein S23”Hs.34630.57 + −0.0240755228“dynamin 1”Hs.1661610.55 + −0.0242220096“—”—0.55 + −0.0243823886“Smooth muscle myosin heavy chain isoformHs.20940.55 + −0.02SMemb [human, umbilical cord, fetal aorta,mRNA Partial, 971 nt]”44788472“nucleobindin 1”Hs.1726090.54 + −0.0245878652“procollagen C-endopeptidase enhancer”Hs.2020970.54 + −0.0246234237“Pirin”Hs.2796630.54 + −0.0250450152“Meis (mouse) homolog 3”Hs.1173130.51 + −0.0251743229“neurofilament 3 (150 kD medium)”Hs.713460.51 + −0.0256134748“glycine cleavage system protein HHs.776310.49 + −0.02(aminomethyl carrier)”60486175“solute carrier family 16 (monocarboxylic acidHs.752310.48 + −0.02transporters), member 1”61376516“cell division cycle 4-like”Hs.623540.48 + −0.0263292522“ESTs”Hs.380220.48 + −0.0266843098“brain acid-soluble protein 1”Hs.795160.48 + −0.0268448386“pre-B-cell leukemia transcription factor 3”Hs.1716800.47 + −0.0270756401“Ras homolog enriched in brain 2”Hs.2799030.47 + −0.0274842918“FERM, RhoGEF (ARHGEF) and pleckstrinHs.1837380.46 + −0.02domain protein 1 (chondrocyte-derived)”76784593“ESTs”Hs.68380.46 + −0.0284364510“special AT-rich sequence binding protein 1Hs.745920.44 + −0.01(binds to nuclear matrix/scaffold-associatingDNA's)”88810864“CGI-48 protein”Hs.61530.43 + −0.019066977“androgen induced protein”Hs.1075280.43 + −0.0192151261“ESTs”Hs.2379710.43 + −0.0195289645“amyloid beta (A4) precursor-like protein 1”Hs.745650.43 + −0.0196416959“nuclear factor I/B”Hs.332870.43 + −0.019847110“heterogeneous nuclear ribonucleoprotein D”Hs.796250.43 + −0.01101244637“chromosome 15 open reading frame 3”Hs.758470.42 + −0.01102949934“heterogeneous nuclear ribonucleoprotein A0”Hs.774920.42 + −0.01103544664“matrin 3”Hs.788250.42 + −0.01108782811“high-mobility group (nonhistoneHs.1398000.42 + −0.01chromosomal) protein isoforms I and Y”109812967“tetraspan 5”Hs.207090.41 + −0.0111475254“cysteine and glycine-rich protein 2 (LIMHs.105260.41 + −0.01domain only, smooth muscle)”115235102“ESTs, Moderately similar to LAK-1Hs.394880.41 + −0.01[H. sapiens]”11881518“apelin; peptide ligand for APJ receptor”Hs.1810600.41 + −0.01119344243“uridine monophosphate kinase”Hs.759390.41 + −0.01120789376“thioredoxin reductase 1”Hs.130460.41 + −0.01122811956“RAN, member RAS oncogene family”Hs.108420.40 + −0.01124811095“Homo sapiens mRNA for KIAA1291 protein,Hs.98050.40 + −0.01partial cds”125823598“proteasome (prosome, macropain) 26SHs.42950.40 + −0.01subunit, non-ATPase, 12”130896949“3-hydroxy-3-methylglutaryl-Coenzyme AHs.118990.40 + −0.01reductase”132140806“peptidylglycine alpha-amidatingHs.839200.40 + −0.01monooxygenase”133760299“Dickkopf gene 3”Hs.49090.40 + −0.0113522260“cytochrome c-1”Hs.6970.40 + −0.01137294496“ESTs”Hs.230370.39 + −0.01138813266“four and a half LIM domains 1”Hs.2390690.39 + −0.01139234150“myotubularin related protein 4”Hs.1417270.39 + −0.01140246194“ESTs”Hs.1255220.39 + −0.01142207358“solute carrier family 2 (facilitated glucoseHs.1699020.39 + −0.01transporter), member 1”1481456118“proteasome (prosome, macropain) subunit,Hs.92800.38 + −0.01beta type, 9 (large multifunctional protease 2)”149753215“guanine nucleotide binding protein (GHs.2038620.38 + −0.01protein), alpha inhibiting activity polypeptide1”15151041“ESTs”Hs.2807700.38 + −0.01153813499“Sjogren's syndrome/scleroderma autoantigenHs.257230.37 + −0.011”1541142132“RaP2 interacting protein 8”Hs.67550.37 + −0.01155789182“proliferating cell nuclear antigen”Hs.789960.37 + −0.01161726236“paired mesoderm homeo box 1”Hs.1556060.37 + −0.01164866694“butyrate-induced transcript 1”Hs.2606220.37 + −0.01165853368“thymidylate synthetase”Hs.829620.37 + −0.0116785259“heme oxygenase (decycling) 1”Hs.2028330.36 + −0.011688327923“translocase of inner mitochondrial membraneHs.118660.36 + −0.01(yeast) homolog”169137535“transcriptional intermediary factor 1”Hs.1838580.36 + −0.01170770391“polymerase (RNA) II (DNA directed)Hs.794020.36 + −0.01polypeptide C (33 kD)”174824591“heterogeneous nuclear ribonucleoprotein F”Hs.8080.36 + −0.01177783697“BCL2/adenovirus E1B 19 kD-interactingHs.794280.36 + −0.01protein 3”178144932“deleted in oral cancer (mouse, homolog) 1”Hs.34360.36 + −0.01179795543“thioredoxin peroxidase (antioxidant enzyme)”Hs.833830.36 + −0.01181292996“tyrosine 3-monooxygenase/tryptophan 5-Hs.755440.36 + −0.01monooxygenase activation protein, etapolypeptide”182345833“heterogeneous nuclear ribonucleoproteinHs.813610.36 + −0.01A/B”184810510“ESTs”Hs.143170.35 + −0.01185882510“karyopherin alpha 2 (RAG cohort 1, importinHs.1595570.35 + −0.01alpha 1)”186144905“PRO1912 protein”Hs.294940.35 + −0.01188878833“ubiquitin carboxyl-terminal esterase L1Hs.761180.35 + −0.01(ubiquitin thiolesterase)”189139835“UDP-glucose dehydrogenase”Hs.283090.35 + −0.01190207082“glucosamine-6-phosphate deaminase”Hs.2785000.35 + −0.01193884718“Hairpin binding protein, histone”Hs.752570.35 + −0.0119571672“electron-transfer-flavoprotein, alphaHs.1699190.34 + −0.01polypeptide (glutaric aciduria II)”197789204“translocation protein 1”Hs.81460.34 + −0.01198757404“von Hippel-Lindau binding protein 1”Hs.1983070.34 + −0.01200784257“kinesin family member 3C”Hs.216110.34 + −0.01

[0210]

11

TABLE 7

Ranked Genes for Rhabdomyosarcoma (RMS)

Rank
Clone Id
GeneDescription
Unigene
Weight

1
296448
“insulin-like growth factor 2
Hs.251664
0.95 + −0.05

(somatomedin A)”

2
207274
“insulin-like growth factor 2
Hs.251664
0.90 + −0.04

(somatomedin A)”

3
244618
“ESTs”
Hs.15463
0.70 + −0.03

4
489631
“chondroitin sulfate proteoglycan 2
Hs.81800
0.54 + −0.03

(versican)”

5
298062
“troponin T2, cardiac”
Hs.89749
0.53 + −0.03

6
784224
“fibroblast growth factor receptor 4”
Hs.165950
0.53 + −0.03

7
1409509
“troponin T1, skeletal, slow”
Hs.73980
0.52 + −0.02

8
461425
“myosin, light polypeptide 4, alkali;
Hs.154156
0.50 + −0.02

atrial, embryonic”

9
245330
“insulin-like growth factor 2
Hs.251664
0.47 + −0.02

(somatomedin A)”

10
796258
“sarcoglycan, alpha (50 kD dystrophin-
Hs.99931
0.46 + −0.02

associated glycoprotein)”

11
293500
“ESTs”
Hs.49714
0.45 + −0.02

12
122159
“collagen, type III, alpha 1 (Ehlers-
Hs.119571
0.45 + −0.02

Danlos syndrome type IV, autosomal

dominant)”

13
324494
“heat shock 27 kD protein 2”
Hs.78846
0.44 + −0.02

14
898219
“mesoderm specific transcript (mouse)
Hs.79284
0.44 + −0.02

homolog”

15
714453
“interleukin 4 receptor”
Hs.75545
0.44 + −0.02

16
42558
“glycine amidinotransferase (L-
Hs.75335
0.44 + −0.02

arginine: glycine amidinotransferase)”

17
377468
“sprouty (Drosophila) homolog 1
Hs.88044
0.43 + −0.02

(antagonist of FGF signaling)”

18
769716
“neurofibromin 2 (bilateral acoustic
Hs.902
0.42 + −0.02

neuroma)”

19
809901
“collagen, type XV, alpha 1”
Hs.83164
0.42 + −0.02

20
813841
“plasminogen activator, tissue”
Hs.274404
0.41 + −0.02

21
795877
“serum-inducible kinase”
Hs.3838
0.41 + −0.02

22
214572
“ESTs”
Hs.280460
0.40 + −0.02

23
130057
“ESTs”
Hs.23057
0.39 + −0.02

24
767495
“GLI-Kruppel family member GLI3
Hs.72916
0.39 + −0.02

(Greig cephalopolysyndactyly

syndrome)”

25
246035
“ESTs”
Hs.78026
0.39 + −0.02

26
41591
“meningioma (disrupted in balanced
Hs.268515
0.38 + −0.02

translocation) 1”

27
714106
“plasminogen activator, urokinase”
Hs.77274
0.38 + −0.02

28
770059
“heparan sulfate proteoglycan 2
Hs.211573
0.38 + −0.02

(perlecan)”

29
814798
“aldehyde dehydrogenase 6”
Hs.75746
0.37 + −0.02

30
365515
“fibroblast growth factor 7
Hs.164568
0.37 + −0.02

(keratinocyte growth factor)”

31
788107
“bridging integrator 1”
Hs.193163
0.36 + −0.02

32
250654
“secreted protein, acidic, cysteine-rich
Hs.111779
0.36 + −0.02

(osteonectin)”

33
295985
“Homo sapiens cDNA FLJ20653 fis,
Hs.180059
0.36 + −0.02

clone KAT01739”

34
789253
“presenilin 2 (Alzheimer disease 4)”
Hs.25363
0.36 + −0.02

35
299737
“Homo sapiens clone 24411 mRNA
Hs.20952
0.35 + −0.02

sequence”

36
859359
“quinone oxidoreductase homolog”
Hs.50649
0.35 + −0.02

37
66714
“peanut (Drosophila)-like 2”
Hs.155524
0.34 + −0.02

39
755750
“non-metastatic cells 2, protein
Hs.275163
0.34 + −0.02

(NM23B) expressed in”

40
727251
“CD9 antigen (p24)”
Hs.1244
0.33 + −0.02

41
25725
“farnesyl-diphosphate
Hs.48876
0.33 + −0.02

farnesyltransferase 1”

42
143306
“lymphocyte-specific protein 1”
Hs.56729
0.33 + −0.02

45
491692
“collagen, type IV, alpha 1”
Hs.119129
0.32 + −0.02

46
142134
“hypothetical protein FLJ20185”
Hs.272972
0.32 + −0.02

47
813823
“lumican”
Hs.79914
0.32 + −0.02

48
788695
“troponin T3, skeletal, fast”
Hs.73454
0.32 + −0.02

49
308163
“ESTs”
Hs.84520
0.32 + −0.02

50
377671
“integrin, alpha 7”
Hs.74369
0.31 + −0.02

51
281901
“ESTs”
Hs.74280
0.31 + −0.02

52
796904
“pleomorphic adenoma gene-like 1”
Hs.75825
0.31 + −0.01

53
773215
“runt-related transcription factor 1
Hs.129914
0.30 + −0.01

(acute myeloid leukemia 1; aml1

oncogene)”

55
486787
“calponin 3, acidic”
Hs.194662
0.30 + −0.01

56
341588
“CGI-119 protein”
Hs.25615
0.29 + −0.01

57
839552
“nuclear receptor coactivator 1”
Hs.74002
0.29 + −0.01

58
365826
“growth arrest-specific 1”
Hs.65029
0.29 + −0.01

59
111884
“ESTs, Weakly similar to hTcf-4
Hs.102367
0.29 + −0.01

[H. sapiens]”

60
797048
“bone morphogenetic protein 4”
Hs.68879
0.28 + −0.01

61
769959
“collagen, type IV, alpha 2”
Hs.75617
0.28 + −0.01

62
204545
“ESTs”
Hs.8966
0.28 + −0.01

63
771323
“procollagen-lysine, 2-oxoglutarate 5-
Hs.75093
0.27 + −0.01

dioxygenase (lysine hydroxylase,

Ehlers-Danlos syndrome type VI)”

65
897865
“midline 1 (Opitz/BBB syndrome)”
Hs.27695
0.27 + −0.01

66
298417
“trefoil factor 3 (intestinal)”
Hs.82961
0.27 + −0.01

67
79022
“FBJ murine osteosarcoma viral
Hs.75678
0.27 + −0.01

oncogene homolog B”

68
290378
“podocalyxin-like”
Hs.16426
0.27 + −0.01

69
784593
“ESTs”
Hs.6838
0.27 + −0.01

70
32493
“integrin, alpha 6”
Hs.227730
0.27 + −0.01

71
45542
“Human insulin-like growth factor
Hs.103391
0.26 + −0.01

binding protein 5 (IGFBP5) mRNA”

72
208001
“CD59 antigen p18-20 (antigen
Hs.119663
0.26 + −0.01

identified by monoclonal antibodies

16.3A5, EJ16, EJ30, EL32 and G344)”

73
413633
“EST”
—
0.26 + −0.01

74
284882
“collagen, type II, alpha 1 (primary
Hs.81343
0.26 + −0.01

osteoarthritis, spondyloepiphyseal

dysplasia, congenital)”

75
273435
“v-yes-1 Yamaguchi sarcoma viral
Hs.194148
0.26 + −0.01

oncogene homolog 1”

76
839991
“collagen, type I, alpha 2”
Hs.179573
0.26 + −0.01

78
323371
“amyloid beta (A4) precursor protein
Hs.177486
0.26 + −0.01

(protease nexin-II, Alzheimer disease)”

79
362483
“spectrin, beta, non-erythrocytic 1”
Hs.107164
0.26 + −0.01

80
839736
“crystallin, alpha B”
Hs.1940
0.25 + −0.01

81
380620
“presenilin 2 (Alzheimer disease 4)”
Hs.25363
0.25 + −0.01

82
343867
“allograft inflammatory factor 1”
Hs.76364
0.25 + −0.01

83
882506
“lysyl oxidase-like 2”
Hs.83354
0.25 + −0.01

84
214990
“gelsolin (amyloidosis, Finnish type)”
Hs.80562
0.25 + −0.01

85
878182
“alpha-2-macroglobulin”
Hs.74561
0.25 + −0.01

86
301122
“extracellular matrix protein 1”
Hs.81071
0.25 + −0.01

87
198982
“DNA (cytosine-5-)-methyltransferase
Hs.97681
0.25 + −0.01

2”

88
138672
“ESTs”
Hs.28412
0.25 + −0.01

89
246377
“EST”
Hs.102670
0.24 + −0.01

90
50941
“cadherin 13, H-cadherin (heart)”
Hs.63984
0.24 + −0.01

91
812196
“UDP-glucose ceramide
Hs.152601
0.24 + −0.01

glucosyltransferase”

92
120881
“proteasome (prosome, macropain)
Hs.251531
0.24 + −0.01

subunit, alpha type, 4”

93
813698
“sprouty (Drosophila) homolog 2”
Hs.18676
0.24 + −0.01

94
810612
“S100 calcium-binding protein A11
Hs.256290
0.24 + −0.01

(calgizzarin)”

97
767851
“fibrillin 1 (Marfan syndrome)”
Hs.750
0.23 + −0.01

99
211758
“ribosomal protein S23”
Hs.3463
0.23 + −0.01

100
506369
“nidogen (enactin)”
Hs.62041
0.23 + −0.01

101
75254
“cysteine and glycine-rich protein 2
Hs.10526
0.23 + −0.01

(LIM domain only, smooth muscle)”

103
823851
“AE-binding protein 1”
Hs.118397
0.23 + −0.01

104
52096
“platelet-derived growth factor
Hs.74615
0.23 + −0.01

receptor, alpha polypeptide”

106
760224
“X-ray repair complementing defective
Hs.98493
0.23 + −0.01

repair in Chinese hamster cells 1”

107
725473
“DNA segment on chromosome 12
Hs.74085
0.23 + −0.01

(unique) 2489 expressed sequence”

111
148028
“epidermal growth factor receptor
Hs.2132
0.23 + −0.01

pathway substrate 8”

113
769028
“mesenchyme homeo box 1”
Hs.438
0.23 + −0.01

115
39093
“methionine aminopeptidase; eIF-2-
Hs.78935
0.22 + −0.01

associated p67”

116
854899
“dual specificity phosphatase 6”
Hs.180383
0.22 + −0.01

118
547247
“stanniocalcin”
Hs.25590
0.22 + −0.01

119
26418
“endothelial differentiation,
Hs.154210
0.22 + −0.01

sphingolipid G-protein-coupled

receptor, 1”

120
811848
“transforming growth factor beta 1
Hs.25511
0.22 + −0.01

induced transcript 1”

123
178463
“transcription factor 8 (represses
Hs.232068
0.22 + −0.01

interleukin 2 expression)”

124
810859
“natural killer cell transcript 4”
Hs.943
0.22 + −0.01

125
40643
“platelet-derived growth factor
Hs.76144
0.22 + −0.01

receptor, beta polypeptide”

126
782193
“thioredoxin”
Hs.76136
0.22 + −0.01

127
1412412
“elastase 1, pancreatic”
Hs.21
0.22 + −0.01

128
470128
“myosin IC”
Hs.82251
0.22 + −0.01

129
68950
“cyclin E1”
Hs.9700
0.22 + −0.01

130
66552
“ESTs”
Hs.119021
0.22 + −0.01

131
233721
“insulin-like growth factor binding
Hs.162
0.22 + −0.01

protein2 (36 kD)”

133
814444
“cofactor required for Sp1
Hs.279902
0.21 + −0.01

transcriptional activation, subunit 9

(33 kD)”

134
160723
“laminin, gamma 1 (formerly
Hs.214982
0.21 + −0.01

LAMB2)”

135
752652
“transcription factor 7-like 2 (T-cell
Hs.154485
0.21 + −0.01

specific, HMG-box)”

136
180902
“CGI-43 protein”
Hs.111515
0.21 + −0.01

137
154472
“fibroblast growth factor receptor 1
Hs.748
0.21 + −0.01

(fms-related tyrosine kinase 2, Pfeiffer

syndrome)”

139
82225
“secreted frizzled-related protein 1”
Hs.7306
0.21 + −0.01

140
898092
“connective tissue growth factor”
Hs.75511
0.21 + −0.01

141
0
“—”
—
0.21 + −0.01

142
773568
“POU domain, class 4, transcription
Hs.211588
0.21 + −0.01

factor 1”

143
144797
“a disintegrin-like and metalloprotease
Hs.8230
0.21 + −0.01

(reprolysin type) with thrombospondin

type 1 motif, 1”

145
139818
“KIAA0669 gene product”
Hs.52526
0.21 + −0.01

146
358433
“retinoid X receptor, gamma”
Hs.26550
0.21 + −0.01

147
141192
“Leman coiled-coil protein”
Hs.92186
0.21 + −0.01

148
813707
“regulator of G-protein signalling 16”
Hs.183601
0.21 + −0.01

149
781014
“suppression of tumorigenicity 5”
Hs.79265
0.21 + −0.01

150
857640
“Human alpha-2 collagen type VI
Hs.281620
0.21 + −0.01

mRNA, 3′ end”

151
811028
“cathepsin D (lysosomal aspartyl
Hs.79572
0.21 + −0.01

protease)”

153
196992
“aldo-keto reductase family 1, member
Hs.275374
0.20 + −0.01

C1 (dihydrodiol dehydrogenase 1; 20-

alpha (3-alpha)-hydroxysteroid

dehydrogenase)”

154
781019
“paraoxonase 2”
Hs.169857
0.20 + −0.01

155
491559
“fatty acid binding protein 3, muscle
Hs.49881
0.20 + −0.01

and heart (mammary-derived growth

inhibitor)”

156
358531
“v-jun avian sarcoma virus 17
Hs.78465
0.20 + −0.01

oncogene homolog”

157
127099
“Homo sapiens cDNA FLJ20754 fis,
Hs.72249
0.20 + −0.01

clone HEP02246”

158
263716
“collagen, type VI, alpha 1”
Hs.108885
0.20 + −0.01

162
78761
“dual-specificity tyrosine-(Y)-
Hs.173135
0.20 + −0.01

phosphorylation regulated kinase 2”

163
246722
“trinucleotide repeat containing 3”
Hs.21858
0.20 + −0.01

164
151449
“protein tyrosine phosphatase, non-
Hs.155693
0.20 + −0.01

receptor type 21”

165
81475
“—”
—
0.20 + −0.01

166
810512
“thrombospondin 1”
Hs.87409
0.20 + −0.01

168
233071
“transmembrane protein 2”
Hs. 160417
0.19 + −0.01

170
809910
“interferon induced transmembrane
Hs.182241
0.19 + −0.01

protein 3 (1-8U)”

171
233688
“a disintegrin and metalloproteinase
Hs.8850
0.19 + −0.01

domain 12 (meltrin alpha)”

172
128054
“H2A histone family, member X”
Hs.147097
0.19 + −0.01

173
143523
“collagen, type V, alpha 1”
Hs.146428
0.19 + −0.01

174
809719
“protein tyrosine phosphatase, receptor
Hs.170121
0.19 + −0.01

type, c polypeptide”

175
45291
“dentatorubral-pallidoluysian atrophy
Hs.169488
0.19 + −0.01

(atrophin-1)”

176
758266
“thrombospondin 4”
Hs.75774
0.19 + −0.01

178
247818
“ESTs”
Hs.239666
0.19 + −0.01

179
130824
“S-phase kinase-associated protein 2
Hs.23348
0.19 + −0.01

(p45)”

180
341328
“tropomyosin 1 (alpha)”
Hs.77899
0.19 + −0.01

181
123916
“dystrophia myotonica-containing WD
Hs.275924
0.19 + −0.01

repeat motif”

183
682555
“insulin-like growth factor 1 receptor”
Hs.239176
0.19 + −0.01

184
868380
“Fc fragment of IgG, low affinity IIa,
Hs.78864
0.19 + −0.01

receptor for (CD32)”

187
869187
“Homo sapiens clone 23698 mRNA
Hs.8136
0.19 + −0.01

sequence”

190
207920
“solute carrier family 17 (sodium
Hs.19710
0.19 + −0.01

phosphate), member 2”

192
469345
“kinase insert domain receptor (a type
Hs.12337
0.18 + −0.01

III receptor tyrosine kinase)”

193
754406
“integrin, alpha M (complement
Hs.172631
0.18 + −0.01

component receptor 3, alpha; also

known as CD11b (p170), macrophage

antigen alpha polypeptide)”

196
43563
“cytochrome P450, subfamily
Hs.82568
0.18 + −0.01

XXVIIA (steroid 27-hydroxylase,

cerebrotendinous xanthomatosis),

polypeptide 1”

198
753775
“guanosine monophosphate reductase”
Hs.1435
0.18 + −0.01

[0211]

12

TABLE 8

Ranked genes for Burkitt's (BL)

Rank
Clone Id
GeneDescription
Unigene
Weight

2
80109
“major histocompatibility complex,
Hs.198253
0.58 + −0.02

class II, DQ alpha 1”

3
840942
“major histocompatibility complex,
Hs.814
0.56 + −0.02

class II, DP beta 1”

7
183337
“major histocompatibility complex,
Hs.77522
0.52 + −0.02

class II, DM alpha”

17
609663
“protein kinase, cAMP-dependent,
Hs.77439
0.45 + −0.02

regulatory, type II, beta”

23
767183
“hematopoietic cell-specific Lyn
Hs.14601
0.43 + −0.02

substrate 1”

27
297392
“metallothionein 1L”
Hs.94360
0.42 + −0.02

30
200814
“membrane metallo-endopeptidase
Hs.1298
0.41 + −0.02

(neutral endopeptidase, enkephalinase, CALLA,

CD10)”

33
241412
“E74-like factor 1 (ets domain
Hs.154365
0.41 + −0.02

transcription factor)”

35
1469292
“pim-2 oncogene”
Hs.80205
0.39 + −0.02

45
417226
“v-myc avian myelocytomatosis viral
Hs.79070
0.38 + −0.01

oncogene homolog”

57
47475
“p53 inducible protein”
Hs.258503
0.36 + −0.01

61
236282
“Wiskott-Aldrich syndrome
Hs.2157
0.35 + −0.01

(ecezema-thrombocytopenia)”

63
868304
“actin, alpha 2, smooth muscle, aorta”
Hs.195851
0.34 + −0.01

65
740604
“interferon stimulated gene (20 kD)”
Hs.183487
0.34 + −0.01

82
824602
“interferon, gamma-inducible protein
Hs.155530
0.31 + −0.01

16”

83
624360
“proteasome (prosome, macropain)
Hs.180062
0.31 + −0.01

subunit, beta type, 8 (large

multifunctional protease 7)”

84
344134
“immunoglobulin lambda-like
Hs.170116
0.31 + −0.01

polypeptide 3”

85
193913
“v-yes-1 Yamaguchi sarcoma viral
Hs.80887
0.31 + −0.01

related oncogene homolog”

88
814526
“seb4D”
Hs.236361
0.31 + −0.01

101
236034
“uncoupling protein 2 (mitochondrial,
Hs.80658
0.30 + −0.01

proton carrier)”

106
745343
“regenerating islet-derived 1 alpha
Hs.1032
0.30 + −0.01

(pancreatic stone protein, pancreatic

thread protein)”

114
788511
“ribosomal protein S6 kinase, 90 kD,
Hs.149957
0.29 + −0.01

polypeptide 1”

118
283315
“phosphoglycerate mutase 2
Hs.46039
0.29 + −0.01

(muscle)”

135
502333
“nuclear receptor coactivator 3”
Hs.225977
0.27 + −0.01

136
262920
“endothelial differentiation-related
Hs.174050
0.27 + −0.01

factor 1”

140
897177
“phosphoglycerate mutase 1 (brain)”
Hs.181013
0.27 + −0.01

146
700792
“cyclin-dependent kinase inhibitor 3
Hs.84113
0.27 + −0.01

(CDK2-associated dual specificity

phosphatase)”

147
626502
“actin related protein 2/3 complex,
Hs.11538
0.27 + −0.01

subunit 1B (41 kD)”

149
769657
“protein phosphatase 1, regulatory
Hs.267819
0.27 + −0.01

(inhibitor) subunit 2”

152
435953
“inositol 1,4,5-triphosphate receptor,
Hs.77515
0.26 + −0.01

type 3”

155
812965
“v-myc avian myelocytomatosis viral
Hs.79070
0.26 + −0.01

oncogene homolog”

159
714453
“interleukin 4 receptor”
Hs.75545
0.26 + −0.01

163
145112
“intercellular adhesion molecule 1
Hs.168383
0.25 + −0.01

(CD54), human rhinovirus receptor”

164
80649
“Rho-associated, coiled-coil
Hs.17820
0.25 + −0.01

containing protein kinase 1”

172
240208
“DKFZP434O125 protein”
Hs.102669
0.25 + −0.01

174
298155
“acyl-Coenzyme A dehydrogenase,
Hs.79158
0.25 + −0.01

C-4 to C-12 straight chain”

176
530185
“CD83 antigen (activated B
Hs.79197
0.25 + −0.01

lymphocytes, immunoglobulin

superfamily)”

185
755145
“villin 2 (ezrin)”
Hs.155191
0.24 + −0.01

192
68977
“proteasome (prosome, macropain)
Hs.9661
0.24 + −0.01

subunit, beta type, 10”

[0212]

13

TABLE 9

Ranked genes for Ewing family of tumors (EWS)

Rank
Clone Id
GeneDescription
Unigene
Weight

2
866702
“protein tyrosine phosphatase, non-receptor type
Hs.211595
0.47 + −0.03

13 (APO-1/CD95 (Fas)-associated phosphatase)”

3
770394
“Fc fragment of IgG, receptor, transporter, alpha”
Hs.160741
0.47 + −0.03

5
377461
“caveolin 1, caveolae protein, 22 kD”
Hs.281621
0.45 + −0.03

6
357031
“tumor necrosis factor, alpha-induced protein 6”
Hs.29352
0.44 + −0.03

7
43733
“glycogenin 2”
Hs.58589
0.42 + −0.03

9
52076
“olfactomedin related ER localized protein”
Hs.74376
0.38 + −0.02

10
814260
“follicular lymphoma variant translocation 1”
Hs.74050
0.36 + −0.02

11
755599
“interferon induced transmembrane protein 1 (9-27)”
Hs.146360
0.35 + −0.02

13
377731
“glutathione S-transferase M5”
Hs.75652
0.34 + −0.02

14
1473131
“transducin-like enhancer of split 2, homolog of
Hs.173063
0.34 + −0.02

Drosophila E(sp1)”

15
823928
“glutathione S-transferase theta 2”
Hs.1581
0.32 + −0.02

16
1435862
“antigen identified by monoclonal antibodies
Hs.177543
0.32 + −0.02

12E7, F21 and O13”

17
812965
“v-myc avian myelocytomatosis viral oncogene
Hs.79070
0.32 + −0.02

homolog”

18
841641
“cyclin D1 (PRAD1: parathyroid adenomatosis 1)”
Hs.82932
0.31 + −0.02

19
208718
“annexin A1”
Hs.78225
0.29 + −0.02

20
713922
“glutathione S-transferase M1”
Hs.278633
0.29 + −0.02

21
291756
“tubulin, beta, 5”
Hs.108014
0.29 + −0.02

23
1323448
“cysteine-rich protein 1 (intestinal)”
Hs.17409
0.28 + −0.02

24
308497
“KIAA0467 protein”
Hs.11147
0.28 + −0.02

25
789091
“H2A histone family, member L”
Hs.28777
0.28 + −0.02

26
1471841
“ATPase, Na + /K + transporting, alpha 1
Hs.190703
0.27 + −0.02

polypeptide”

27
178825
“neurogranin (protein kinase C substrate, RC3)”
Hs.26944
0.26 + −0.02

28
810504
“proteolipid protein 2 (colonic epithelium-
Hs.77422
0.25 + −0.02

enriched)”

29
740554
“Homo sapiens mRNA; cDNA DKFZp434I0812
Hs.263671
0.25 + −0.02

(from clone DKFZp434I0812); partial cds”

30
24415
“tumor protein p53 (Li-Fraumeni syndrome)”
Hs.1846
0.25 + −0.02

31
811108
”thyroid hormone receptor interactor 6”
Hs.119498
0.25 + −0.02

32
770868
“NGFI-A binding protein 2 (ERG1 binding protein 2)”
Hs.159223
0.25 + −0.01

35
80338
“selenium binding protein 1”
Hs.7833
0.24 + −0.01

38
212640
“Rho GTPase activating protein 4”
Hs.3109
0.24 + −0.01

39
417226
“v-myc avian myelocytomatosis viral oncogene
Hs.79070
0.24 + −0.01

homolog”

40
742132
“interferon-stimulated protein, 15 kDa”
Hs.833
0.23 + −0.01

41
365826
“growth arrest-specific 1”
Hs.65029
0.23 + −0.01

42
161993
“CCAAT/enhancer binding protein (C/EBP), beta”
Hs.99029
0.23 + −0.01

43
811000
“lectin, galactoside-binding, soluble, 3 binding
Hs.79339
0.23 + −0.01

protein (galectin 6 binding protein)”

44
768205
“homeo box D9”
Hs.236646
0.22 + −0.01

48
345232
“lymphotoxin alpha (TNF superfamily, member
Hs.36
0.22 + −0.01

1)”

49
586854
“CGI-119 protein”
Hs.25615
0.22 + −0.01

52
744417
“carnitine acetyltransferase”
Hs.12068
0.21 + −0.01

53
364934
“death-associated protein kinase 1”
Hs.153924
0.21 + −0.01

54
809694
“cellular retinoic acid-binding protein 1”
Hs.7678
0.21 + −0.01

55
491565
“Cbp/p300-interacting transactivator, with
Hs.82071
0.21 + −0.01

Glu/Asp-rich carboxy-terminal domain, 2”

56
1470048
“lymphocyte antigen 6 complex, locus E”
Hs.77667
0.21 + −0.01

57
814266
“protein kinase C, zeta”
Hs.78793
0.21 + −0.01

58
296030
“ESTs”
Hs.10362
0.21 + −0.01

59
379708
“chromodomain helicase DNA binding protein 3”
Hs.25601
0.21 + −0.01

60
755506
“annexin A4”
Hs.77840
0.20 + −0.01

61
39796
“3-hydroxymethyl-3-methylglutaryl-Coenzyme A
Hs.831
0.20 + −0.01

lyase (hydroxymethylglutaricaciduria)”

62
741885
“transcription factor binding to IGHM enhancer 3”
Hs.274184
0.20 + −0.01

63
271102
“copper chaperone for superoxide dismutase”
Hs.5002
0.20 + −0.01

64
470261
“SMA3”
Hs.251397
0.20 + −0.01

66
745343
“regenerating islet-derived 1 alpha (pancreatic
Hs.1032
0.20 + −0.01

stone protein, pancreatic thread protein)”

67
563673
“antiquitin 1”
Hs.74294
0.20 + −0.01

68
39093
“methionine aminopeptidase; eIF-2-associated
Hs.78935
0.20 + −0.01

p67”

75
234376
“Homo sapiens mRNA; cDNA DKFZp564F112
Hs.166361
0.19 + −0.01

(from clone DKFZp564F112)”

76
810133
“ESTs”
Hs.10362
0.19 + −0.01

78
815239
“Rho guanine nucleotide exchange factor (GEF) 1”
Hs.252280
0.19 + −0.01

80
172751
“amyloid beta (A4) precursor protein-binding,
Hs.4880
0.18 + −0.01

family A, member 1 (X11)”

81
289645
“amyloid beta (A4) precursor-like protein 1”
Hs.74565
0.18 + −0.01

84
769579
“mitogen-activated protein kinase kinase 2”
Hs.72241
0.18 + −0.01

85
1422723
“interferon-induced protein 35”
Hs.50842
0.18 + −0.01

86
296880
“membrane protein, palmitoylated 1 (55 kD)”
Hs.1861
0.18 + −0.01

87
744052
“nuclear receptor subfamily 1, group H, member 2”
Hs.100221
0.18 + −0.01

88
782503
“Homo sapiens clone 23716 mRNA sequence”
Hs.12214
0.18 + −0.01

89
1434905
“homeo box B7”
Hs.819
0.18 + −0.01

90
212542
“Homo sapiens mRNA; cDNA DKFZp586J2118
Hs.21851
0.18 + −0.01

(from clone DKFZp586J2118)”

91
506548
“regulator of G-protein signalling 10”
Hs.82280
0.18 + −0.01

93
768443
“microsomal glutathione S-transferase 1”
Hs.790
0.18 + −0.01

94
75923
“Human zinc finger protein mRNA, complete cds”
Hs.78765
0.18 + −0.01

97
1475595
“alkaline phosphatase, liver/bone/kidney”
Hs.250769
0.17 + −0.01

99
231355
“vesicle-associated membrane protein 2
Hs.194534
0.17 + −0.01

(synaptobrevin 2)”

100
841620
“dihydropyrimidinase-like 2”
Hs.173381
0.17 + −0.01

101
1456900
“dipeptidase 1 (renal)”
Hs.109
0.17 + −0.01

103
773246
“ring finger protein 1”
Hs.35384
0.17 + −0.01

104
191743
“ESTs”
Hs.94814
0.17 + −0.01

105
265874
“nuclear factor I/C (CCAAT-binding transcription
Hs.184771
0.17 + −0.01

factor)”

106
767345
“ESTs, Moderately similar to I59372 cadherin 12 —
Hs.44898
0.17 + −0.01

human [H. sapiens]”

107
729964
“sphingomyelin phosphodiesterase 1, acid
Hs.77813
0.17 + −0.01

lysosomal (acid sphingomyelinase)”

108
768644
“zona pellucida glycoprotein 3A (sperm receptor)”
Hs.250867
0.17 + −0.01

111
858469
“thrombospondin 3”
Hs.169875
0.17 + −0.01

112
756556
“complement component 1 inhibitor (angioedema,
Hs.151242
0.17 + −0.01

hereditary)”

113
190887
“myeloid differentiation primary response gene
Hs.82116
0.17 + −0.01

(88)”

114
1475730
“chaperonin containing TCP1, subunit 6A (zeta 1)”
Hs.82916
0.17 + −0.01

115
137158
“chromogranin A (parathyroid secretory protein
Hs.172216
0.17 + −0.01

1)”

116
897774
“adenine phosphoribosyltransferase”
Hs.28914
0.17 + −0.01

120
757248
“calpain, large polypeptide L3”
Hs.40300
0.17 + −0.01

124
811920
“interleukin 11 receptor, alpha”
Hs.64310
0.16 + −0.01

125
824602
“interferon, gamma-inducible protein 16”
Hs.155530
0.16 + −0.01

126
150702
“homeo box B5”
Hs.22554
0.16 + −0.01

127
37553
“protein phosphatase 2A, regulatory subunit B'
Hs.236963
0.16 + −0.01

(PR 53)”

128
139957
“hypothetical protein FLJ11181”
Hs.28472
0.16 + −0.01

130
343646
“v-ski avian sarcoma viral oncogene homolog”
Hs.2969
0.16 + −0.01

131
1031748
“synovial sarcoma, X breakpoint 3”
Hs.178749
0.16 + −0.01

132
166236
“glucose-6-phosphate dehydrogenase”
Hs.80206
0.16 + −0.01

133
740801
“branched chain keto acid dehydrogenase E1,
Hs.78950
0.16 + −0.01

alpha polypeptide (maple syrup urine disease)”

134
120468
“excision repair cross-complementing rodent
Hs.59544
0.16 + −0.01

repair deficiency, complementation group 1

(includes overlapping antisense sequence)”

137
785967
“erythrocyte membrane protein band 4.1-like 2”
Hs.7857
0.16 + −0.01

139
361943
“Meis1 (mouse) homolog”
Hs.170177
0.16 + −0.01

140
810551
“low density lipoprotein-related protein 1 (alpha-2-
Hs.89137
0.16 + −0.01

macroglobulin receptor)”

141
841698
“exostoses (multiple) 1”
Hs.184161
0.16 + −0.01

142
753104
“dopachrome tautomerase (dopachrome delta-
Hs.240217
0.16 + −0.01

isomerase, tyrosine-related protein 2)”

143
878798
“beta-2-microglobulin”
Hs.75415
0.16 + −0.01

145
811900
“lymphotoxin beta receptor (TNFR superfamily,
Hs.1116
0.16 + −0.01

member 3”

146
741831
“phospholipid transfer protein”
Hs.154854
0.15 + −0.01

147
549146
“stimulated trans-acting factor (50 kDa)”
Hs.68054
0.15 + −0.01

149
841340
“ATP-binding cassette, sub-family B (MDR/TAP),
Hs.158164
0.15 + −0.01

member 2”

153
42576
“ubiquitin-activating enzyme E1 (A1S9T and
Hs.2055
0.15 + −0.01

BN75 temperature sensitivity complementing)”

154
53039
“carbohydrate (keratan sulfate Gal-6)
Hs.104576
0.15 + −0.01

sulfotransferase 1”

155
308163
“ESTs”
Hs.84520
0.15 + −0.01

157
949938
“cystatin C (amyloid angiopathy and cerebral
Hs.135084
0.15 + −0.01

hemorrhage)”

158
166195
“ribonuclease/angiogenin inhibitor”
Hs.75108
0.15 + −0.01

159
239611
“hemoglobin, epsilon 1”
Hs.117848
0.15 + −0.01

160
36950
“phosphofructokinase, liver”
Hs.155455
0.15 + −0.01

161
82903
“TAP binding protein (tapasin)”
Hs.179600
0.15 + −0.01

162
183440
“arylsulfatase A”
Hs.88251
0.15 + −0.01

163
787857
“syntaxin 5A”
Hs.154546
0.15 + −0.01

164
840821
“signal sequence receptor, delta (translocon-
Hs.102135
0.15 + −0.01

associated protein delta)”

165
760148
“uroporphyrinogen decarboxylase”
Hs.78601
0.15 + −0.01

166
1434948
“HIV TAT specific factor 1”
Hs.171595
0.15 + −0.01

167
897788
“protein tyrosine phosphatase, receptor type, F”
Hs.75216
0.15 + −0.01

168
810124
“platelet-activating factor acetylhydrolase, isoform
Hs.6793
0.15 + −0.01

Ib, gamma subunit (29 kD)”

169
50359
“mannose phosphate isomerase”
Hs.75694
0.15 + −0.01

170
221826
“guanine nucleotide binding protein (G protein),
Hs.1686
0.15 + −0.01

alpha 11 (Gq class)”

171
753587
“butyrophilin, subfamily 3, member A3”
Hs.167741
0.15 + −0.01

172
839980
“glucose-6-phosphatase, transport (glucose-6-
Hs.26655
0.15 + −0.01

phosphate) protein 1”

173
33327
“Homo sapiens mRNA for KIAA1232 protein,
Hs.11101
0.15 + −0.01

partial cds”

174
711961
“general transcription factor IIF, polypeptide 1
Hs.68257
0.15 + −0.01

(74 kD subunit)”

175
809910
“interferon induced transmembrane protein 3 (1-
Hs.182241
0.15 + −0.01

8U)”

180
172783
“hypothetical protein FLJ10390”
Hs.133475
0.15 + −0.01

182
1374571
“paired basic amino acid cleaving enzyme (furin,
Hs.59242
0.14 + −0.01

membrane associated receptor protein)”

183
138936
“erythrocyte membrane protein band 7.2
Hs.160483
0.14 + −0.01

(stomatin)”

186
795321
“mannosidase, alpha, class 2A, member 2”
Hs.182923
0.14 + −0.01

188
263727
“DNA segment, single copy probe LNS-CAI/LNS-
Hs.178112
0.14 + −0.01

CAII (deleted in polyposis”

189
75009
“EphB4”
Hs.155227
0.14 + −0.01

190
435953
“inositol 1,4,5-triphosphate receptor, type 3”
Hs.77515
0.14 + −0.01

191
782335
“ESTs”
Hs.38270
0.14 + −0.01

194
754600
“nuclear factor I/X (CCAAT-binding transcription
Hs.35841
0.14 + −0.01

factor)”

195
213890
“2,4-dienoyl CoA reductase 1, mitochondrial”
Hs.81548
0.14 + −0.01

197
1472735
“metallothionein 1E (functional)”
Hs.74170
0.14 + −0.01

199
781097
“reticulon 3”
Hs.252831
0.14 + −0.01

200
810057
“cold shock domain protein A”
Hs.1139
0.14 + −0.01

[0213] Alternatively, the genes expressed in the Tables 6 through 9 that are expressed in high levels in the specific cancers can be used as targets for designing vaccines for therapy and for making specific antibodies against and used to target these cancers. Also these genes or their protein products can be inhibited via a variety of methods including oligonucleotide DNA antisense, RNAi (making double stranded siRNA inhibitors, and drugs including small molecules and therefore be be used for treatment of these cancers. Genes found in this manner, such as those shown in Tables 6 through 9 can be used in microarrays. For example, microarrays including any combination of at least one of the 200 genes from Table 5 can be fabricated.

[0214] Alternatively, Table 10 shows 19 genes that were found using a method of the invention and are involved with signal transduction. Signal transduction proteins can be important targets for therapy since they pass on signals from the outside of the cell to the nucleus to either survive or proliferate. Of this list of genes only the first (clone ID 200814) has been previously used as a specific target for leukemia/lymphoma therapy. The remainder of the genes are novel targets. For example, FGFR4, a tyrosine kinase receptor that is expressed during myogenesis and prevents terminal differentiation in myocytes, was found to be highly expressed only in RMS, and in particular not in normal muscle. The relatively strong differential expression of FGFR4 in RMS was confirmed by immunostaining of tissue microarrays. The high expression of FGFR4 in most cases of RMS suggests that it may be relevant to the biology of this tumor, it is also expressed in some other cancers. This suggests that, FGFR4 expression in RMS is of biological and therapeutic interest.

14TABLE 10Genes involved with signal transductionnameCloneIDdiagnosissummaryfunctionmembrane metallo-200814BLEnkephalinase; membrane zincendopeptidase (neutralmetalloendopeptidase, may inactivateendopeptidase, enkephalinase,peptide hormones|ProteomeCALLA, CD10)protein tyrosine phosphatase,897788NOTBLReceptor-type protein tyrosinereceptor type, Fphosphatase F; interacts with the insulinreceptor; has Ig-like and FN-III repeats inthe extracellular domain|Proteomeprotein kinase, cAMP-609663BL*Type II regulatory beta subunit of cAMP-dependent, regulatory, type II,dependent protein kinasebeta(PKA)|Proteomeannexin A1208718EWS*Annexin I (lipocortin 1); Ca2+-dependentphospholipid-binding protein, inhibitsphospholipase A2 and has anti-inflammatory activity|Proteomeinterleukin 4 receptor714453RMS_BLSubunit of the interleukin 4 receptor;member of the cytokine receptorfamily|Proteomerecoverin383188NB*Recoverin; calcium-binding protein thatactivates guanylate cyclaseactivity|Proteomefibroblast growth factor784224RMS*Fibroblast growth factor receptor 4;receptor 4receptor tyrosine kinase, preferentiallybinds acidic FGF; contains threeextracellular immunoglobulin-likedomains|Proteometransducin-like enhancer of1473131EWS*Enhancer of split groucho 2; possiblysplit 2, homolog of Drosophilafunctions during epithelialE(sp1)differentiation; transducin-like, similar toDrosophila E(spI) m9/10, which isrequired for cell fate decisions|Proteometumor necrosis factor, alpha-357031EWS*Similar to CD44; binds hyaluronate andinduced protein 6may be involved in cell-cellcommunication during the immuneresponse|Proteomeras homolog gene family,768370NOTBLRas-related GTP binding protein of themember Brho subfamily, member B; may regulateassembly of actin stress fibers and focaladhesions; very strongly similar tomurine Arhb|Proteomeinsulin-like growth factor 2245330RMSInsulin-like growth factor II(somatomedin A)(somatomedin A); member of the insulinprotein family|Proteomehematopoietic cell-specific Lyn767183BLContains a helix-turn-helix DNA bindingsubstrate 1domain and an SH3 domain|Proteomedihydropyrimidinase-like 2841620EWS_NBMember of the dihydropyrimidinasefamily|Proteomeamyloid beta (A4) precursor323371NOTBLAmyloid beta precursor protein (proteaseprotein (protease nexin-II,nexin-II); cell surface protease inhibitor;Alzheimer disease)reduces Cu|Proteomeinterferon induced755599EWS*Interferon-inducible transmembranetransmembrane protein 1 (9-27)protein 1; involved in relayingantiproliferative and homotypic adhesionsignals|Proteomesecreted frizzled-related82225NB*Secreted frizzled-related protein 1; mayprotein 1have an anti-apoptotic function andinhibit Wnt protein activity; stronglysimilar to murine Sfrp1|Proteomedeath-associated protein kinase 1364934EWS*Death associated protein kinase 1;serine/threonine kinase regulated bycalmodulin, may mediate apoptosisinduced by interferon-gamma; hasankyrin repeats|Proteomelectin, galactoside-binding,811000EWS_NBMac-2-binding protein; potent immunesoluble, 3 binding proteinstimulator; contains a macrophagescavenger receptor cysteine-richdomain|Proteomeinsulin-like growth factor2907511RMSMember of the insulin-like growth factorbinding protein 5binding family of proteins; may bind toand modulate insulin-like growth factoractivity|Proteome

[0215] We then determined the classification error rate using increasing numbers of these ranked genes. The classification error rate minimized to 0% at 96 genes, see FIG. 5. The 10 dominant PCA components for these 96 genes contained 79% of the variance in the data matrix. Using only these 96 genes, we recalibrated the ANN models and again correctly classified all 63 samples, see FIG. 6. Moreover, multidimensional scaling (MDS) analysis using these 96 genes clearly separated the four cancer types, see FIG. 7. The top 96 discriminators represented 93 unique genes, see FIG. 8, as IGF2 was represented by three independent clones and MYC by two.

[0216] Of the 96 genes, 13 were anonymous expressed sequence tags (ESTs); 16 genes were specifically expressed in EWS, 20 in RMS, 15 in NB and 10 in BL. Twelve genes were good discriminators on the basis of lack of expression in BL and variable expression in the other three types. One gene (EST; Clone ID 295985) discriminated EWS from other cancer types by its lack of expression in this cancer. The remainder of the genes was expressed in two of the four cancer types. To our knowledge, of the 61 genes that were specifically expressed in cancer type, 41 have not been previously reported as associated with these diseases. These 41 genes can be seen in Table 2 given above.

Example 5

Diagnostic Classification and Hierarchical Clustering

[0217] The diagnostic classification capabilities of these ANN models were then tested on a set of 25 blinded test samples. Samples were classified to a diagnostic category if they received the highest vote for that category. As this classifier had only four possible outputs, all samples were classified to one of the four categories. We therefore established a diagnostic classification method based on a statistical cutoff to enable us to reject a diagnosis of a sample classified to a given category. If a sample falls outside the 95th percentile of the probability distribution of distances between samples and their ideal output (for example for EWS it is EWS=1, RMS=NB=BL=0), its diagnosis is rejected.

15TABLE 11SampleANN committee voteANNANNHistologicalSourcelabelEWSRMSNBBLclassificationdiagnosisdiagnosislabelSourceTest 10.010.070.760.06NBNBNB-CIMR32ATCCTest 20.670.060.080.09EWSEWSEWS-CCHOP1NCITest 30.110.170.160.11RMS—Osteosarcoma-COsA-ClATCCTest 40.000.950.060.03RMSRMSARMS-TARMD1CHTNTest 50.110.110.250.10NB—Sarcoma-CA204ATCCTest 60.980.040.100.03EWSEWSEWS-T9608P053CHTNTest 70.050.020.050.93BLBLBL-CEB1ATCCTest 80.000.050.940.04NBNBNB-CSMSSANNCITest 90.220.600.030.06RMS—Sk. MuscleSkM1CHTNTest 100.100.680.110.04RMS—ERMS-TERDM1CHTNTest 110.390.040.280.15EWS—Prostate Ca.-CPC3ATCCTest 120.890.050.140.03EWSEWSEWS-TSARC67CHTNTest 130.200.70.030.05RMS—Sk. MuscleSkM2CHTNTest 140.030.020.900.07NBNBNB-TN83DZNSGTest 150.060.030.050.91BLBLBL-CEB2ATCCTest 160.030.020.930.05NBNBNB-TNB1DZNSGTest 170.010.900.050.03RMSRMSARMS-TARMD2CHTNTest 180.060.040.040.88BLBLBL-CGA10ATCCTest 190.990.020.040.05EWSEWSEWS-TET3CHTNTest 200.400.300.100.06EWS—EWS-T9903P1339CHTNTest 210.810.190.120.04EWSEWSEWS-TES23MSKCCTest 220.010.880.090.04RMSRMSERMS-TERMD2CHTNTest 230.070.080.700.06NBNBNB-TNB2DZNSGTest 240.050.870.060.03RMSRMSERMS-TRMS4MSKCCTest 250.050.020.890.06NBNBNB-TNB4DZNSGSource label refers to the original name of the sample as designated by the source. Histological diagnosis is defined as cancer type suffixed with -T for a tumor sample and -C for a cell line. Normal skeletal muscle (Sk. Muscle) is also included in the test set. The ANN classification as determined by the committee vote is bolded. NCI: National Cancer Institute, National Institutes of Health, ATCC: American Type Culture Collection, MSKCC: Memorial Sloan-Kettering Cancer Center, CHTN: # Cooperative Human Tissue Network, DZNSG: German Cancer Research Center, Heidelberg.

[0218] The test samples contained both tumors (5 EWS, 5 RMS and 4 NB) and cell lines (1 EWS, 2 NB and 3 BL). The ability of these models to reject a diagnosis on 5 non-SRBCTs was also tested (consisting of 2 normal muscle tissues (Tests 9 and 13) and 3 cell lines including an undifferentiated sarcoma (Test 5), osteosarcoma (Test 3) and a prostate carcinoma (Test 11)). Using the 3750 ANN models calibrated with the 96 genes, we correctly classified 100% of the 20 SRBCT tests (FIG. 6 and Table 11) as well as all 63 training samples, see Table 4. Three of these samples, Test 10, Test 20 and EWS-T13 were correctly assigned to their categories (RMS, EWS and EWS respectively), having received the highest vote for their respective categories. However, their distance from a perfect vote was greater than the expected 95th percentile distance (FIG. 6); therefore, we could not confidently diagnose them by this criterion. All of the five non-SRBCT samples were excluded from any of the four diagnostic categories, since they fell outside the 95th percentiles. Using these criteria for all 88 samples, the sensitivity of the ANN models for diagnostic classification was 93% for EWS, 96% for RMS and 100% for both NB and BL. The specificity was 100% for all four diagnostic categories.

[0219] Also, hierarchical clustering using the 96 genes, identified from the ANN models, correctly clustered all 20 of the test samples (FIG. 9). Moreover, the two pairs of samples that were derived from two cell lines, BL-C2 and C4 (ST486) and NB-C2 and C7 (GICAN), were adjacent to one another in the same cluster.

Example 6

Expression of FGFR4 on SRBCT Tissue Array

[0220] To confirm the effectiveness of the ANN models to identify genes that show preferential high expression in specific cancer types at the protein level, we performed immunohistochemistry on SRBCT tissue arrays for the expression of fibroblast growth factor receptor 4 (FGFR4). This tyrosine kinase receptor is expressed during myogenesis but not in adult muscle, and is of interest because of its potential role in tumor growth and in prevention of terminal differentiation in muscle. Moderate to strong cytoplasmic immunostaining for FGFR4 was seen in all 26 RMSs tested (17 alveolar, 9 embryonal). We also observed generally weaker staining in EWS and BL in agreement with the microarray results, except for one of anaplastic large cell lymphoma that was strongly positive (data not shown).

[0221] As such, the foregoing description of the exemplary embodiments of the invention has been presented for the purposes of illustration and description. They are not intended to be exhaustive or to limit the invention to the precise forms disclosed. Many modifications and variations are possible in light of the above teaching. It is intended that the scope of the invention be limited not with this detailed description, but rather by the claims appended hereto. The present invention is presently embodied as a method, apparatus, and a computer data product containing a computer program for classifying and diagnosing disease using artificial neural networks.

[0222] The above specification, examples and data provide a complete description of the manufacture and use of the composition of the invention. Since many embodiments of the invention can be made without departing from the spirit and scope of the invention, the invention resides in the claims hereinafter appended.

	Number	Date	Country
Parent	10133937	Apr 2002	US
Child	10159563	May 2002	US

Selections of genes and methods of using the same for diagnosis and for targeting the therapy of select cancers

Information

Publication Number

Date Filed

Date Published

Inventors

CPC

US Classifications

International Classifications

Abstract

Description

Claims

Parent Case Info

Continuation in Parts (1)