Patent Application
20140020136
The present invention concerns the field of biological control in agriculture and horticulture. In particular, the invention concerns biological control of bacterial plant pathogens, more particularly, the pathogens which are species of Pectobacterium, Ralstonia and Dickeya which cause soft rot, bacterial wilt or blackleg disease in potato.
Agricultural crops are susceptible to a large variety of microbial pathogens, which worldwide leads to enormous annual losses of produce and to concomitant economic damage. Methods developed to protect crops from plant diseases include plant breeding for resistance, cultural practices, application of chemical agents, and biological control.
Biological control of plant diseases generally is defined as suppression of pathogens by application of one or more organisms that exhibit antagonistic activity towards the pathogens. The organisms that act as antagonists usually are named biological control agents (BCAs). The mechanisms of the antagonistic effects are based on a variety of biological properties of BCAs. These comprise production of antibiotic compounds, expression of enzymes that catalyze the decomposition of cell components of pathogens, competition for space and nutrients, the ability to parasitize pathogens, and the induction of plant defense.
The application of chemical pesticides, which still prevails the management of plant diseases, generally exhibits negative side-effects on the environment and on human health. In addition, plant diseases relatively fast become resistant against chemical pesticides. This has increased the call for novel BCAs as safe and long-lasting alternative control agents.
Despite the well-documented efficacy of many different antagonists, only a limited number of strains are actually used in registered products directed to plant pathogenic microorganisms. Antagonists most commonly used in commercially available biocontrol products are the fungi Trichoderma harzianum, Trichoderma polysporum and Gliacladium virens, and the bacteria Agrobacterium radiobacter, Pseudomonas fluorescens and Bacillus subtilis (see Agrios G. N., pages 322-328, in: Plant Pathology, 5th edition, 2004, Elsevier, Amsterdam). Examples of those products are F-Stop, BINAB® T, Trichodex®, GlioGard, Agrosin 84, Dagger G, and Kodiak.
The BCA products available are reported to control a broad spectrum of plant pathogenic microorganisms. Notably however, the pathogenic target organisms almost exclusively belong to the taxonomic kingdoms Protista and Fungi. Among these target organisms are various species of the genera Pythium, Phytophthora, Botrytis, Fusarium, Rhizoctonia, Penicillium, Sclerotinia, Nectria and powdery mildews. In contrast, only few bacterial pathogens are reported to be target for biocontrol products. Rare examples are Agrobacterium tumefaciens, responsible for crown gall disease (to be controlled by for example Agrosin 84), and Erwinia amylovora, responsible for fire blight in fruits (to be controlled by for example BlightBan®).
The current commercial technology directed against bacterial plant pathogens is based mainly on the application of chemical pesticides (generally antibiotics).
The urgent need for microbial antagonists that effectively suppress bacterial plant pathogens is illustrated by the problematic management of potato soft rot and blackleg diseases, which are caused by species of Pectobacterium and Dickeya. These pectinolytic bacteria affect potato plants and tubers in virtually all phases of tuber production including storage, and form a continuous threat to (seed) potato production worldwide. Selection for blackleg and soft rot resistant potato cultivars has not resulted in seed lots free from Pectobacterium and Dickeya species (see Lapwood and Harris (1982), Potato Research 25, 41-50; Lapwood and Read (1984), Plant Pathology 33, 13-20). Physical (e. g. hot water treatment) and chemical procedures apparently disinfect only superficially and do not affect the high densities of pectinolytic Pectobacterium and Dickeya species that are located inside the vascular system at the stolon end of the tubers (see Czajkowski et al, (2009), European Journal of Plant Pathology 125, 263-275).
Blackleg and soft rot diseases caused by Dickeya and Pectobacterium species are causing major damage in seed potato production in Europe. The role of Dickeya spp. in the occurrence of potato blackleg seems to be increasing. This increase is associated with the detection of a new genetic clade of Dickeya spp., which could not be classified into one of the six species recently described by Samson et al. (2005, IJSEM 55: 1415-1427) (See Tsror et al. (2008), European Journal of Plant Pathology 123(3): 311-320; Slawiak et al., (2009), European Journal of Plant Pathology 125(2): 245-261). This new clade probably constitutes a new species and is provisionally called “D. solani”. Its occurrence was reported in potato in many European countries (i. e. The Netherlands, Finland, Poland, Germany, Belgium, France, United Kingdom, Sweden and Spain) and in Israel.
Possibilities to control Dickeya species and Pectobacterium species in potato are limited (see Van der Wolf and De Boer (2007), In: Potato biology and biotechnology, advances and perspectives. pp.595-617, Elsevier, Amsterdam). Control strategies include the use of pathogen-free seed, measures to avoid wounding, drainage of soils to avoid oxygen depletion of tubers which can impair the host resistance, and hygienic measures. These methods, however, do not guarantee production of blackleg pathogen-free crop.
No tuber treatments are currently used in practice to reduce the inoculum of Dickeya and Pectobacterium species. In general, use of physical treatments and chemical control agents only will help to reduce inoculum superficially present in tubers, but cannot eliminate inoculum deeper located without affecting tuber sprouting. No systemic bactericides are available that can kill the pathogens inside.
Application of micro-organisms as a biological control agent is often an environmental-friendly alternative to traditional physical and chemical treatments.
Although promising control may be obtained for some bacterial diseases in plants like crown gall caused by Agrobacterium tumefaciens (see Lopez et al. (1987), EPPO Bulletin 17: 273-279) and fire blight caused by Erwinia amylovora (see Stockwell et al. (1998), Phytopathology 88: 506-513) with the use of bacterial antagonists, only limited work has been conducted to control pectinolytic bacteria in potato plants under field conditions. No commercial products against blackleg and soft rot diseases based on bio-control agents or their mixtures have been introduced to the market.
Serratia is a genus of Gram-negative, facultatively anaerobic, rod-shaped bacteria of the Enterobacteriaceae family. The most common species is Serratia marcescens. Members of the genus frequently produce prodigiosin which is a characteristic red pigment of the genus.
Antagonistic activity to bacterial plant pathogens exhibited by Serratia marcescens has been disclosed earlier. Jafra S. et al (2009, Journal of Applied Microbiology 106: 268-277) describes a strain of Serratia marcescens able to inhibit maceration caused by Dickeya zeae which is a causative agent of soft rot in the bulbs.
Strains of another Serratia species, namely S. plymuthica have been frequently used to control fungal pathogens of plants (see Berg, G. (2000) Journal of Applied Microbiology 88: 952-960; see also Frankowski et al. (2001) Archives of Microbiology 176: 421-426). A comprehensive review on the use of Serratia plymuthica for the control of fungal plant pathogens is provided by De Vleesschauwer and Mine (2007, CAB Reviews: Perspectives in Agriculture, Veterinary Science, Nutrition and Natural Sources 2: 1-12).
WO 01140442A1 describes the use of a Serratia plymuthica strain and metabolites thereof for the suppression of weeds and fungi. The strain is A153 deposited at NCIMB under accession No. 40938 and its active metabolites are haterumalide A, B, E and X.
In spite of the frequent use of Serratia plymuthica as BCA against fungal plant pathogens, no substantial antagonistic activity against bacterial plant diseases have been reported so far for this Serratia species. For example, a Serratia plymuthica strain commercially available for the biocontrol of fungal diseases showed negligible activity to Dickeya species causing soft rot and blackleg disease in potato. Of the many strains of Serratia plymuthica described so far as potential antimicrobial BCAs, none of these have been reported to show any activity against plant pathogenic bacteria (De Vleesschauwer and Mine (2007), CAB Reviews: Perspectives in Agriculture, Veterinary Science, Nutrition and Natural Sources 2: 1-12).
The inventors have discovered a new strain of S. plymuthica designated A30. The inventors have also found that S. plymuthica A30 is a BCA. In particular, that S. plymuthica A30 is a BCA against the bacteria causing blackleg disease in potato plants. The newly discovered S. plymuthica A30 has been found to be a BCA against pectinolytic Dickeya spp., including the biovar 3 strain.
The inventors have found that tuber treatments with S. plymuthica A30 as a BCA results in protection of potato plants from blackleg and eradication of tuber-borne Dickeya sp. inoculum. S. plymuthica A30 has also been found to survive in soil and colonize potato tubers, roots and stems from soil-borne inoculum. The colonizing S. plymuthica A30 is also found to be sustained inside potato plants.
Surprisingly it has been found that the presence of S. plymuthica A30 decreases blackleg incidence in potato plants by 100% under greenhouse conditions. Also, the presence of S. plymuthica A30 decreases the colonization of stems by Dickeya sp. by 97% under greenhouse conditions.
Accordingly, the present invention provides Serratia plymuthica strain A30, BCCM Deposit No. LMG P-26170 (deposited 19 Nov. 2010) its analogues or functionally equivalent strains thereto.
The depositor of BCCM LMG P-26170 is Wageningen University & Research Centre, Plant Research International, P.O. Box 69, 6700 AB Wageningen, The Netherlands. The authorised representing person is Dr Jan M van der Wolf of the same address. The depositor has consented and authorises the applicant, Stichting Dienst Landbouwkundig Onderzoek and Stichting voor de Technische Wetenschappen to refer to the deposited biological material in the present application.
Functionally equivalent strains include those strains which possess one or more characteristics unique to Serratia plymuthica strain A30, BCCM Deposit No. LMG P-26170.
The strain produces antibiotics against Dickeya and Pectobacterium species, produces auxin with and without supplementation of L-tryptophan, produces biosurfactants, is motile, is not pectinolytic, grows at pH 10.0 in nutrient broth and under anaerobic conditions in potato dextrose broth. A30 strain does not produce red pigment.
S. plymuthica strain A30 is preferably in an isolated form, although it may be present in combination with other bacteria of the same or a different genus, whether the bacteria are brought together by hand of man and co-cultured, or whether bacteria existing together in nature are partially purified from other bacteria with which they exist in nature.
In preferred embodiments, the A30 strain is a substantially pure culture, which means a culture of a bacterial strain containing no other bacterial species in quantities sufficient to interfere with replication of the culture or to be detectable by normal bacteriological techniques.
“Isolated” when used in connection with the organisms and cultures described herein not only means a substantially pure culture, but also any culture of organisms which is grown or maintained other than as it is found in nature.
The S. plymuthica strain A30 of the invention may be in a form which is metabolically active, which is to say that it forms a growing culture in liquid and/or on solid medium. Metabolic activity may be determined simply by measuring the growth of bacterial cells or may be determined by measuring the integrity of the cell membrane or the activity of certain enzymes such as DNase, esterase, lipase and/or gelatinase, for example. The activity of other core metabolic bacterial enzymes may be measured to assess metabolic activity.
Alternatively, the S. plymuthica strain A30 of the invention may be in a solid form, e.g. or a dried or freeze dried preparation of a culture. In this form the bacterial cells are believed to be substantially inactive metabolically, but on dissolving the dried preparations into an aqueous environment bacterial cell activity is resumed, together with measurable bacterial cell growth and metabolism.
The variant, analogue or functional equivalent of the S. plymuthica strain A30 of the invention may differ in terms of the amino acid sequences of one or more protein constituents, as encoded by the gene of the organism. For example, at least a single amino acid change to at least one protein may occur, whether by deletion, addition or substitution. One, two, three, four, five or more single amino acid changes may take place disparately along the length of an amino acid sequence, or together at one location, e.g. a deletion of one, two, three four, five or more single amino acids. More than one protein in the S. plymuthica strain A30 may be changed in the aforementioned way to generate a variant, analogue or functional equivalent.
The deposited S. plymuthica strain A30 may differ from its variant, analogue or functional equivalents in the amino acid sequence of one or more proteins, as measured by the percentage degree of identity. The variant, analogue or functional equivalent may share 95% identity in amino acid sequence in at least one protein with the deposited S. plymuthica strain A30, preferably at least 96%, 97%, 98%, 99%, 99.5%, 99.6%, 99.7%, 99.8% or 99.9% identity therewith. The amino acid sequences of all proteins in the variant, analogue or functional equivalent may share at least 95% identity across a multiplicity of amino acid sequences with deposited S. plymuthica strain A30, preferably at least 96%, 97%, 98%, 99%, 99.5%, 99.6%, 99.7%, 99.8% or 99.9% identity therewith. The identity may be shared across substantially all amino acid sequences in the organism to the recited percentage identities.
The variant, analogue or functional equivalent of the S. plymuthica strain A30 of the invention may differ in terms of the nucleic acid sequences in at least some of its genome, compared to the deposited S. plymuthica strain A30. One or more gene sequences may be different, whether the genes are for structural or controlling elements. The variant, analogue or functional equivalent may be at least 95% identical with the deposited S. plymuthica strain A30 nucleic acid sequence, preferably at least 96%, 97%, 98%, 99%, 99.5%, 99.6%, 99.7%, 99.8% or 99.9% identity therewith.
The reference to percentage identity also includes and refers to percentage homology between the deposited strain and its variant, analogue or functional equivalents.
S. plymuthica is classified into risk group 1 according to DSMZ (German collection of Microorganisms and Cell cultures), meaning that the species is not expected to pose a risk for humans and environment. To date, no human or animal-related pathogenicity factors for S. plymuthica have been described.
The invention also provides a biological culture comprising Serratia plymuthica strain A30, Deposit No. LMG P-26170 or a variant, analogue, or functional equivalent thereof, as hereinbefore described, and a solid or a liquid medium, or a fraction thereof.
The biological culture of the invention may be substantially uncontaminated with other organisms so that it is comprised substantially of S. plymuthica A30 and/or its variants, analogues, or functional equivalents thereof. The culture may be substantially homogeneous in terms of bacterial cell content, i.e. at least 95% S. plymuthica A30 and/or its variants, analogues, or functional equivalents thereof; preferably the homogeneity is selected from one of at least: 96%, 97%, 98%, 99%, 99.5% or 99.9%. The biological culture may comprise no other competent or viable bacterial cell other than S. plymuthica A30 and/or its variants, analogues, or functional equivalents thereof.
The present invention therefore also provides a substantially isolated S. plymuthica A30 and/or its variants, analogues, or functional equivalents thereof.
The invention further provides a composition for biological control of plant disease comprising Serratia plymuthica strain A30 Deposit No. LMG P-26170 or a variant, analogue, or functional equivalent thereof, and an agriculturally or horticulturally acceptable diluent, carrier, filler or adjuvant.
Compositions within the present invention may be formulated as: aqueous suspensions; stabilized liquid suspensions; emulsifiable concentrates; capsules; soluble or wettable powders; aqueous flowables; dry flowables; wettable granules; wettable dispersible granules; and the like, as is known to those skilled in the art.
Examples of agriculturally acceptable or horticulturally acceptable diluents include aqeuous solutions of monosaccharides, polysaccharides, molasses, gums, lignosulfonates, glycerol, sorbitol, propylene glycol, and water, vegetable oils and mineral oils. Carriers may include solids such as alginate beads, durum flour (starch) granules, silica, clays, clay minerals (e.g. attapulgite, kaolonite, montmorillonite, pyrophillite, illite), gelatine, cellulose, cellulose derivatives, calcium chlorite and talcum powder. In some embodiments the carrier may be a porous solid, e.g. diatomaceous earth, charcoal, (e.g. animal bone charcoal), peat, vermiculite, lignite, wood chips and corn cob.
The A30 strain may also be incorporated into fertilizers, soil, or foliar additives. Other suitable formulations will be readily apparent to those skilled in the art.
The composition preferably also includes the appropriate amount or concentration of S. plymuthica A30 and/or its variants, analogues, or functional equivalents thereof, depending on the route and timing of treatment of plants, plant tissue or plant parts against disease. Preferably the biocontrol agent is applied in higher than pathogen inoculum.
The compositions of strain A30 may be applied manually to plants by means of machines (sprayers) or irrigation systems. Plant parts such as tubers may be dipped into aqueous or liquid suspensions or solid powders or sprayed. Several applications of compositions of the invention may be desirable during a crop cycle given the upredictability of the onset of disease caused by pathogenic plant bacteria. Inoculation of plants with strain A30 of the invention is preferred prior to pathogen exposure, whenever possible.
An application protocol in accordance with the invention consists of dipping potato tubers prior to planting in an aqueous suspension of strain A30. The strain A30 is at a concentration in the range 106 to 1012 colony forming units (cfu) per milliliter (cfu.ml−1). A preferred concentration range for the A30 strain is 108 to 1010 cfu.ml−1.
Organic and/or inorganic fertilizers can be added with A30 to help build populations of A30 in the foliage, roots, and soil. The fertilizer can be added at the same time or before or after the A30 strain is present. The fertilizer can be added to the plant and/or to the soil.
In preferred embodiments of the invention for use in field conditions, a concentration between 108 to 1010 cfu.ml−1 of strain A30 is employed. In more preferred embodiments the concentration is in the range 0.5 to 9.5×109 cfu. ml−1, In the field, tubers may be treated at the time of planting with as little as about 1 ml of the suspension.
In some embodiments tubers may be dipped in a liquid prior to planting. In preferred embodiments, tubers are sprayed with liquid composition comprising strain A30 of the invention at the time of planting. The spraying may be carried out in ways known in connection with fungicides such as for monceren. In preferred embodiments, the S. plymuthica will colonize plants directly upon sprouting and root formation.
Compositions of the invention may further comprise one or more further components which can be a biological control agent, an antibiotic, a herbicide, a pesticide, a fungicide, a plant growth substance an inducer of natural plant defense or a fertilizer. The one or more further components may be administered to plants or plant parts simultaneously, separately or sequentially. The S. plymuthica A30 and/or its variants, analogues, or functional equivalents thereof of the invention may be administered before or after the other further components.
Of course, the application of further substances alongside strain A30 of the invention, e.g. pesticides, should generally be avoided due to their potential antibacterial activity (unless previously tested in a bioassay). If a pesticide is to be used, then the A30 strain of the invention is preferably reapplied one week after pesticide application.
The invention therefore includes a kit of parts comprising a first container containing the composition of S. plymuthica A30 and/or its variants, analogues, or functional equivalents thereof, and a second container containing an agriculturally or horticulturally acceptable diluent, carrier or adjuvant. The second container may also comprise the further component such as a biological control agent, an antibiotic, a herbicide, a pesticide, a fungicide, a plant growth substance or a fertilizer.
Alternatively, the second container contains an agriculturally or horticulturally acceptable diluent, carrier or adjuvant, and a yet further container contains the further component such as a biological control agent, an antibiotic, a herbicide, a pesticide, a fungicide, a plant growth substance or a fertilizer.
The kits of the invention may also include written instructions in printed or electronic form.
Other biological control agents may include microorganisms such as fungi, e.g. Trichoderma harzianum, Trichoderma polysporum and Gliacladium virens, and/or bacteria, e.g. Agrobacterium radiobacter, Pseudomonas fluorescens and Bacillus subtilis and or bacteriophages
Antibiotics as additional composition components may include streptomycin or actinomycin, for example.
Herbicides as additional composition components may include dimethenamid, EPTC, glyphosphate, paraquat, pendimethalin, sethoxydim, rimsulfuron, metolachlor or metrubuzin.
Pesticides as additional composition components may include 2,4-dichlorophenoxyacetic acid (2,4-D), chloropropham, DDT, DDE, dieldrin, endosulfans, thiabendazole, c-phenylphenol and phorate.
Fungicides as additional composition components may include metalaxyl and/or carbamate compounds, cymoxanil and mancozeb. In particular the synergistic combination of cymoxanil and mancozeb is useful.
Plant growth substances as additional components of the compositions may include an auxin or abscissic acid (ABA). The auxin may be one or more of 2,4-Dichlorophenoxyacetic acid (2,4-D), α-Naphthalene acetic acid (α-NAA), 2-Methoxy-3,6-dichlorobenzoic acid (dicamba), 4-Amino-3,5,6-trichloropicolinic acid (tordon or picloram) or α-(p-Chlorophenoxy)isobutyric acid (PCIB, an antiauxin).
The composition of the invention may further comprise a rooting substrate, e.g. a compost, soil (natural or artificial), sand, and/or an inert particulate rooting medium, such as vermiculite.
Plants, plant tissue or plant parts treated with compositions of the invention acquire an exogenous and/or endogenous infection of S. plymuthica A30 and/or its variants, analogues, or functional equivalents thereof. Only a single treatment may be necessary,
although two or more treatments may be required to achieve optimal infection. Although not wishing to be bound by any particular theory, the inventors believe that the endogenous and/or exogenous infection with S. plymuthica A30 and/or its variants, analogues, or functional equivalents thereof results in the prevention of growth of any other bacterial species which may also be present, particularly Pectobacterium spp. and/or Dickeya spp. The inventors have found that strain A30 is an endophyte which is a microbe which colonizes living, internal tissues of plants without causing any immediate, overt negative effects.
In situations where other bacterial species have already infected a plant, plant part or tissue, treatment with a composition of the invention allows an infecting S. plymuthica A30 and/or its variants, analogues, or functional equivalents thereof, to eventually outcompete the original bacterial species. Hence the compositions of the invention may be used for prevention or treatment of disease, e.g. soft rot or blackleg in plants.
The invention therefore also includes a plant, plant part or plant tissue comprising exogenous and/or endogenous Serratia plymuthica strain A30, Deposit No. LMG P-26170 or a variant, analogue, or functional equivalent thereof. The range of such plants in accordance with this aspect of the invention is listed below as plants susceptible for treatment in accordance with the methods of the invention.
The invention further includes a method of preventing or treating disease in plants comprising exposing a plant, plant part or plant tissue to Serratia plymuthica strain A30, Deposit No. LMG P-26170 or a variant, analogue, or functional equivalent thereof. Similarly, such methods of the invention include applying compositions of the invention described herein to plants, plant parts or tissue to provide a biological control of infection by plant pathogenic bacteria. Methods of application of the A30 strain and its compositions are well known to the average skilled person, as well as apparatus for mixing and applying compositions to plants, plant parts and plant organs. Subject of these methods may be seeds, seedlings, plants, crops, plant parts, flowers, fruits, vegetative plant parts (e.g. seed tubers and plant cuttings), soil and artificial substrate systems used for culturing plant material. The applications of strain the biological control agent of strain A30 and its compositions can be pre-harvest or post-harvest.
Where plants possess tubers, bulbs, corms or rhizomes, and plants are to be treated in accordance with the invention, then application of compositions of the invention preferably takes place prior to the planting of a tuber, bulb, corm or rhizome. Seeds can also be treated in accordance with the invention prior to sowing. The treatment may take the form of a coating of the seed in which the A30 strain of the invention is incorporated into the a known seed coating mixture. The coated seeds may take the form of pellets.
Alternatively or in addition, whether or not plants possess tubers, bulbs, corms or rhizomes, compositions of the invention may be applied to a shoot or shoot portion of a plant.
The invention therefore includes S. plymuthica strain A30, Deposit No. LMG P-26170 or a variant, analogue, or functional equivalent thereof, as a biological control agent for use in prevention or treatment of a plant disease.
The methods and uses of the invention are preferably for preventing or treating a plant disease is caused by a bacterial disease pathogen, in particular a soft rot or “blackleg” of potato. The bacterial pathogen to be treated or prevented is preferably Dickeya spp. and/or Pectobacterium spp., preferably Dickeya spp. biovar 3 strain.
A wide range of plants are susceptible for prevention or treatment of bacterial disease by using the methods and composition of the invention described herein. Plants may be monocots or dicots.
Amongst monocots susceptible to infection by Dickeya spp., the plants may be a species member of the Araceae, Arecaceae, Asphodelaceae, Bromeliaceae, Hyacinthaceae, Iridaceae, Musaceae, Orchidaceae, Poaceae, or the Zingiberaceae.
The plant susceptible to infection by Dickeya spp. may be a species from monocot genera selected from Aglaonema spp., Aechema spp., Dieffenbachia spp., Philodendron spp., Syngonium spp., Xanthosoma spp., Zantedeschia spp., Phoenix spp., Aloe spp., Ananas spp., Iris spp., Musa spp., Phalaenopsis spp., Brachiaria spp., Oryza spp., Saccharum spp, Sorghum spp., Zea spp., or Elettaria spp. Preferred species include Aglaonema pictum, Aechema fasciata, Dieffenbachia spp., Philodendron selloum, Syngonium podophyllum, Xanthosoma sagittifolia, Zantedeschia aethopica, Phoenix dactylifera, Aloe vera, Ananas comosus, Iris x germanica, Musa paradisiaca, Phalaenopsis spp., Brachiaria spp., Oryza sativa, Saccharum officinarum, Sorghum bicolor, Zea mays, or Elettaria cardomomum.
Amongst dicots, the plant susceptible to infection by Dickeya spp. may be a species member of the Apiaceae, Asteraceae, Begoniaceae, Brassicaceae, Caryophyllaceae, Convolvulaceae, Crassulaceae, Euphorbiaceae, Fabaceae, Geraniaceae, Gesneriaceae, Myrsinaceae or the Solanaceae.
The plant susceptible to infection by Dickeya spp. may be a species from dicot genera selected from Arracacia spp., Daucus spp., Chrysanthemum spp., Cichorium spp., Cynara spp., Dahlia spp., Begonia spp., Dianthus spp., Ipomoea spp., Kalanchoe spp., Euphorbia spp., Helianthus spp., Medicago spp., Parthenium spp., Pelargonium spp., Saintpaulia spp., Cyclamen spp., Solanum spp. or Nicotiania spp. Preferred species include Arracacia xanthorrhiza, Daucus carota, Chrysthanthemum maximum, Chrysanthemum x morifolium, Cichorium intybus, Cynara cardunculus, Dahlia sp., Begonia bertinii, Dianthus caryophyllus, Ipomoea batatus, Kalanchoe blossfeldiana, Euphorbia pulcherrima, Helianthus annuus, Medicago sativa, Pelargonium capitatum, Saintpaulia ionantha, Cyclamen sp., Solanum lycopersicum, Nicotiana tabacum, Solanum melongena and Solanum tuberosum.
Amongst monocots susceptible to infection by Pectobacterium spp., the plants may be a species member of the Agavaceae, Alliaceae, Araceae, Asphodelaceae, Bromeliaceae, Dioscoreaceae, Iridaceae, Lilaceae, Orchidaceae, Pandanaceae, Ruscaceae or Strelitzaceae.
The plant susceptible to infection by Pectobacterium spp. may be a species from monocot genera selected from Agave spp., Allium spp., Dieffenbachia spp., Scindapsus spp., Zantedeschia spp., Aloe spp., Dioscorea spp., Iris spp., Tulipa spp., Cattleya spp., Cymbidium spp., Phalaenopsis spp., Pandanus spp., Dracaena spp, Strelitzia spp. Preferred species include Agave tequilana, Allium cepa, Dieffenbachia spp., Scindapsus aureus, Zantedeschia aethiopica, Zantedeschia elliottiana, Zantedeschia rehmannii, Aloe arborescens, Dioscorea spp., Tulipa spp., Cattleya spp., Cymbidium spp., Phalaenopsis spp., Pandanus conoideus, Dracaena sanderiana, Strelitzia reginae.
Amongst dicots, the plant susceptible to infection by Pectobacterium spp. may be a species member of the Amaranthaceae, Anacardiaceae, Apiaceae, Asteraceae, Brassicaceae, Cactaceae, Crassulaceae, Cucurbitaceae, Euphorbiaceae, Lauraceae, Malvaceae, Moraceae, Myrsinaceae, Primulaceae, Rosaceae or the Solanaceae.
The plant susceptible to infection by Pectobacterium spp. may be a species from dicot genera selected from Beta spp., Spinacea spp., Mangifera spp., Apium spp., Arracacia spp., Coriandrum spp., Daucus sp., Arctium spp. Cichorium spp., Helianthus spp., Lactuca spp., Parthenium spp., Tagetes spp., Eutrema spp., Brassica spp., Raphanus spp., Acanthocereus spp., Carnegiea spp., Ferocactus spp., Opuntia spp., Stenocereus spp., Kalanchoe spp. Preferred species include Beta vulgaris, Spinacea oleracea, Mangifera indica, Apium graveolens, Arracacia xanthorrhiza, Coriandrum sativum, Daucus carota, Arctium minus, Cichorium intybus, Helianthus annuus, Lactuca sativa, Parthenium argentatum, Tagetes patula, Eutrema wasabi, Brassica oleracea, Brassica rapa, Brassica sativus, Raphanus sativus, Acanthocereus tetragonus, Carnegiea giganteum, Ferocactus wislizenii, Opuntia ficus-indica, Opuntia fulgida, Opuntia phoeacantha, Opuntia stricta, Opuntia violacea, Stenocereus thurberi, Kalanchoe blossfedliana.
Advantageously, the invention provides a biological control agent of low toxicological impact on the environment, low risk for resistance development by the pathogens. There is also the relatively durability/longevity of the biocontrol effect after settlement of the A30 strain in the plant system.
The efficacy of strain A30 is relatively broad; for example, in contrast to an antagonistic Bacillus species the A30 strain on potato tuber disks has strong antagonistic activity against both Dickeya and Pectobacterium species.
Another advantage of the A30 strain is that it is an exceptionally potent internal and external colonizer of plant roots and this contributes to its success as a biological control agent. These advantages of strain A30 were entirely unexpected, particularly as a combination.
The invention will now be described in detail and with reference to the Examples and to the following drawings in which:
To assess bacterial densities on potato slices, approx 2 g of tuber tissue independently collected from 3 randomly chosen wells per treatment and per time point was crushed in the presence of 4 ml of ¼ Ringer's buffer in Universal Bioreba bag using a hammer. Hundred μl of undiluted, 1000 and 10,000 times diluted extracts were NA pour plated.
The medium was supplemented with 40 μg ml−1 of tetracycline. Plates were incubated at 28° C. for 24-48 h and screened using epifluorescence stereo microscope for presence of DsRed and/or GFP fluorescent cells. Results from free independent samples per treatment and per time point were averaged. The experiment was independently repeated.
Entire seed tuber and total roots were sampled per plant at each time point. At 7 days post inoculation, all shoots were sampled as a composite sample per plant and at 28 days composite samples of stem cuttings taken 5 cm above the ground level was per plant analyzed. Plant samples were surface-sterilized before extraction of bacteria. Plant extracts were NA pour plated and after incubation plates were screened for green and/or red fluorescent colonies. The average values from two experiments are shown from ten plants per time point. Statistical analysis was done per subsample and per time point (soil n=10, total roots n=10, stems n=10, seed tubers n=10). Values followed by identical characters are not significantly different (P=0.05)
In greenhouse experiments carried out by the inventors, treatment of tubers with GFP-tagged S. plymuthica A30 just before planting resulted in protection of potato tubers/plants from Dickeya sp. and blackleg symptoms. Percentages of plants expressing tuber rot or typical blackleg symptoms were significantly reduced in comparison to the control plants inoculated with Dickeya sp. IPO3012.
Tuber treatments with GFP-tagged S. plymuthica A30 resulted in a rapid colonization of potato plants. Potato plants were systematically and internally colonized just 7 days post bacteria application to soil. S. plymuthica A30 was able to move inside potato plants upward to the stems after inoculation of soil. The bacteria then survived in the potato tissues. Movement of bacteria occurred via xylem vessels in vascular tissue of roots and stems. Relatively low yet stable populations of S. plymuthica A30 inside roots and stems were present for at least 28 days. S. plymuthica A30 shares the characteristic of typical endophyte which does not cause any disease symptoms in plants and build up only low internal populations. These low A30 populations inside roots and stems were sufficient to protect potato plants from colonization by Dickeya sp. IPO3012 and expression of typical blackleg symptoms in majority of co-inoculated plants.
The inventors also found that S. plymuthica A30 was also able to colonize the root surface. After 7 days bacteria were already present inside vascular tissue of roots and after 28 days we observed large A30 populations on the root surface.
The inventors further observed that S. plymuthica A30 was able to efficiently colonize internal root tissues suggesting that the bacterium is able to invade roots via natural openings created during root development.
Bacteria were isolated from rotten potato tuber tissue of different tubers (cv. Arcade, Konsul, Kondor, Agria) by plating rotten potato tuber extracts on agar media TSA, NB, King's B or R2A and collecting morphologically different bacterial colonies. 649 isolated strains were screened for antibiosis against D. solani or for the production of iron ion chelating proteins (siderophores). Of these, 112 isolates produced siderophores, 41 produced antibiotics and 496 were not active against D. solani.
A selection of 41 antibiotic-producing strains and 41 siderophore producing strains were tested in a potato slice assay for antagonism against D. solani. Strains that were able to reduce rotting of potato tuber tissue to at least 50% of the control were selected. These isolates then characterized by 16S rRNA sequencing as being species of Bacillus, Pseudomonas, Rhodococcus, Serratia, Obesumbacterium or Lysinbascillus.
23 of these isolates, 13 producing antibiotics and 10 producing siderophores, were further characterised by testing quorum sensing signal detection, motility, biosurfactant production, growth at low (4.0) and high (10.0) pH, growth at 10° C. in aerobic and anaerobic conditions and for tryptophan dependent and independent auxin production.
12 of the above isolates were taken and tested in plants in the greenhouse. Potato tubers were inoculated with each isolate.
As a result of the greenhouse experiments, four antagonistic strains were found.
One of these is Serratia plymuthica A30 which was deposited under the Budapest Treaty at the Belgian Co-ordinated collection of Microorganisms (BCCM) under accession No. LMG P-26170.
The strain was selected on the basis of in vitro production of antibiotics against Dickeya sp. The A30 strain produces antibiotics against Dickeya sp., is able to degrade acyl homoserine lactones and produces biosurfactants. The strain is motile and able to grow in aerobic and anaerobic conditions. The A30 strain also produces plant growth stimulating auxins.
The ability of S. plymuthica A30 to protect potato tuber tissue against maceration by Dickeya sp. IPO2222 was evaluated in a potato slice assay. A30 and Dickeya sp. IPO2222 were grown overnight in NB at 28° C. with shaking (200 rpm). Bacteria were centrifuged (5 min, 6000×g) and washed twice with ¼ Ringer's buffer. The density of A30 was adjusted to approx.108 cfu ml−1 and Dickeya sp. to approx. 106 cfu ml−1 with sterile water. Wells of the tuber were filled up with 50 μl suspension containing 108 cfu ml−1 of A30 and 106 cfu ml−1 of Dickeya sp. Three potato slices derived from three different tubers were used per treatment. For the negative control, instead of bacterial suspension 50 μl of sterile water and for the positive control 50 μl containing 106 cfu ml−1 of Dickeya sp. were used. The experiment was independently repeated. For disease development slices were incubated at 28° C. for 72 h in a humid box. The protection effect of A30 on potato tissue was measured by comparing the average diameter of rotten potato tissue around co-inoculated wells with the average diameter of rotten potato tissue around wells of the positive control. The results showed a clear and strong protective effect of S. plymuthica A30 against maceration by Dickeya sp. IPO2222 (see
To assess knowledge of interaction and bacterial populations inside potato plant tissue and to microscopically visualize viable bacterial cells in situ, including in planta, the biovar 3 Dickeya sp. strain was tagged with red fluorescent protein (DsRed) and S. plymuthica A30 with green fluorescent protein (GFP), respectively. Tagging with GFP and DsRed proteins enabled detailed microscopy study on the localization and population dynamics of both bacteria species.
Bacterial Strain and Media used for Cultivation
S. plymuthica A30 (Deposit Accession No. LMG P-26170) and biovar 3 type strain Dickeya sp. IPO2222 (Slawiak et al. (2009), European Journal of Plant Pathology 125: 245-261) were grown at 28° C. for 24-48 h on tryptic soya agar (TSA) (Oxoid) or nutrient agar (NA) (Oxoid) prior to use. Liquid cultures were prepared in nutrient broth (NB) (Oxoid) and/or tryptic soya broth (TSB) (Oxoid) at 28° C. for 24 h with agitation (200 rpm). Strains of GFP-tagged S. plymuthica A30 and DsRed-tagged Dickeya sp. IPO3012 were grown on or in the same media supplemented with 40 μg ml−1 of tetracycline (Sigma) (NAt, TSAt, NBt, TSBt). When plant extracts were analyzed, growth media were additionally supplemented with cycloheximide (Sigma) to a final concentration of 200 μg ml−1 to prevent possible fungal growth.
Generation of GFP-Tagged S. plymuthica A30 and DsRed-Tagged Dickeya sp. IPO3012 Strains
Plasmids pRZ-T3-gfp and pRZ-T3-dsred were used for generation of GFP-tagged S. plymuthica A30 (A30GFP) and DsRed-tagged biovar 3 Dickeya sp. IPO3012 (parental strain Dickeya sp. IPO2222), respectively. The plasmids carrying genes coding for fluorescent proteins were introduced to bacterial cells by electroporation (see Calvin and Hanawalt (1988), Journal of Bacteriology 170: 2796-2801) as described previously (see Czajkowski et al. (2010), Phytopathology 100: 134-142). Briefly, suspensions of competent bacterial cells of approximately 50 μl of A30 or IPO2222 (containing approx. 1011-1012 cfu. ml−1 were mixed with 100 ng μl−1 plasmid DNA and electroshocked at 2.5 kV for 1-2 sec at 4° C. using Bio-Rad Gene Pulser 200/0.2 (Biorad, Hercules, Calif., USA). After electroporation, bacterial cells were resuscitated for 1 h in 500 μl of NB at 28° C. with shaking. Hundred microliters of the transformed cells were plated on TSA containing 40 μg ml−1 of tetracycline and incubated for 24-48 h at 28° C. for selection of positive GFP or DsRed fluorescent transformants.
Transformation of S. plymuthica A30 with pRZ-T3-gfp and Dickeya sp. IPO2222 with pRZ-T3-dsred plasmids resulted in 43 and 29 transformants, respectively. A colony with a high fluorescence was collected for each of the bacteria. Repeated transfers of transformants on agar plates under selective conditions showed that bacteria expressed GFP or DsRed in a stable way. The presence of pRZ-T3-gfp in S. plymuthica A30-GFP and pRZ-T3-dsred in Dickeya sp. IPO3012 was proven by plasmid DNA purification and agarose gel electrophoresis.
Labeling of S. plymuthica A30 and Dickeya sp. IPO2222 with fluorescent proteins did not affect the fitness of the strains. The transformed strains behaved in the same way as the parental wild-type strains indicating that the expression of GFP and DsRed proteins did not significantly affected the important biological features.
To compare bacterial growth of tagged bacteria with parental strains (Dickeya sp. IPO3012 versus IPO2222 and A30 versus A30GFP) under aerobic conditions, an overnight bacterial culture with a density of ca. 109-1010 cfu ml−1 in NBt was diluted 50 times in the same medium. Bacteria were grown at 28° C. with a shaking rate of 200 rpm. The growth rate was determined by measuring the OD600 for a period of up to 24 h.
Growth of Dickeya sp. strains under anaerobic conditions, created by adding 5 ml of liquid paraffin to 30 ml of the bacterial suspensions in PEB (see Perombelon, M., C, M, and J. M. Van der Wolf (2002). Methods for the detection and quantification of Erwinia carotovora subsp. atroseptica (Pectobacterium carotovorum subsp. atrosepticum) on potatoes: a laboratory manual, Scotish Crop Research Institute), was determined in a similar way as described for growth under aerobic conditions with the exception that cultures were not agitated during the incubation time.
S. plymuthica A30-GFP and Dickeya sp. IPO3012 displayed similar growth characteristics in liquid media as the parental wild type A30 and IPO2222 strains, respectively, indicating that the growth of the strains was not affected either by the presence of the pRZ-T3 plasmids or by expression of fluorescent (GFP or DsRed) proteins.
Bacterial suspensions were diluted in Ringer's buffer (Merck) to a concentration of approximately 106 cfu ml−1. Potato tubers of cultivar Agria (Agrico, The Netherlands) were rinsed with running tap water, subsequently washed twice with 70% ethanol for 5 min and washed twice for 1 min with demineralized water. Tubers were dried with tissue paper and cut into 0.7 cm transverse disk slices.
Three 5 mm deep wells per slice were made using a sterile cork borer with a diameter of 5 mm. Wells were filled with 50 μl of the bacterial suspension. Three potato slices derived from three different tubers were used per treatment. For disease development slices were incubated at 28° C. for 72 h in a humid box. The diameter of rotting tissue around inoculated wells was measured after 72 h incubation at 28° C. The result was compared with that of the wild type strain and with a water control. The experiment was repeated twice with the same setup.
The abilities of the Dickeya sp. IPO3012 and IPO2222 to macerate potato tuber tissue were compared in a potato slice test. After incubation of inoculated tuber slices for 3 days at 28° C., the diameters of the rotting tissue were not significantly different from the wild type IPO2222 strain.
In this potato slice assay, GFP-tagged S. plymuthica A30 was able to fully stop potato tissue maceration caused by Dickeya sp. IPO3012 when applied in 100 times higher densities than Dickeya sp. and considerably reduce tuber tissue maceration when applied in 10 times higher or equal to Dickeya sp. densities.
The ability of GFP-tagged S. plymuthica A30 to inhibit growth of Dickeya sp. IPO2222 was tested in an overlay plate assay with IPO2222 as the indicator strain. Fifty μl of an overnight culture of Dickeya sp. (approx. 109 cfu ml−1) in NB was mixed with 5 ml of soft top agar (NB supplemented with 0.7% agar) pre-warmed to 45-50° C., and poured onto TSA plates. After agar had solidified, 2.5 μl of an overnight culture of S. plymuthica A30 or GFP-tagged S. plymuthica A30 in NB and NBt, respectively (approx. 109 cfu ml−1) was spotted on the surface of the agar plate. Plates were incubated for 24-48 h at 28° C. The diameter of the clear ‘halo’ (indicating Dickeya sp. IPO2222 growth inhibition) which appeared around the colonies was measured.
After incubation of co-inoculated agar plates for 1-2 days at 28° C., the diameters of the clear halos around the GFP-tagged A30 colonies indicating growth inhibition of Dickeya sp. were not significantly different from the diameters of the clear halos around the wild type A30 colonies.
The ability of GFP-tagged S. plymuthica A30 to protect potato tuber tissue against maceration by Dickeya sp. IPO2222 was evaluated in a potato slice assay, in a similar way as described for the experiment in which tuber tissue maceration ability of the DsRed-tagged Dickeya sp. was tested. GFP-tagged A30 and wild type A30 and Dickeya sp. IPO2222 were grown overnight in NBt or NB respectively at 28° C. with shaking (200 rpm). Bacteria were centrifuged (5 min, 6000×g) and washed twice with ¼ Ringer's buffer. The density of the GFP-tagged A30 was adjusted to approx. 108 cfu ml−1 and Dickeya sp. to approx. 106 cfu ml−1 with sterile water. Wells of the tuber were filled up with 50 μl suspension containing 108 cfu ml−1 of GFP-tagged A30 and 106 cfu ml−1 of Dickeya sp. IPO3012.
Three potato slices derived from three different tubers were used per treatment. For the negative control, instead of bacterial suspension 50 μl of sterile water and for the positive control 50 μl containing 106 cfu ml−1 of Dickeya sp. were used. The experiment was independently repeated. For disease development slices were incubated at 28° C. for 72 h in a humid box. The protective effect of A30 on potato tissue was measured by comparing the average diameter of rotten potato tissue around co-inoculated wells with the average diameter of rotten potato tissue around wells of the positive control.
The ability of the GFP-tagged S. plymuthica A30 to protect potato tuber tissue from maceration by Dickeya sp. IPO2222 was compared with the wild type strain of S. plymuthica A30 in a potato slice test. After incubation of tuber slices, co-inoculated with a GFP-tagged S. plymuthica A30 and Dickeya sp. IPO2222 for 72 h at 28° C. the diameters of the rotten tissue were not significantly different.
The effect of the inoculum density of the GFP-tagged S. plymuthica A30 on the ability to protect potato tuber tissue against maceration caused by Dickeya sp. IPO3012 was tested in a potato slice assay. Potato slices were co-inoculated with 106 cfu ml−1 of IPO3012 and A30 in density ranging from 104 to 108 cfu ml−1. GFP and DsRed tagged colonies were counted under an epifluorescence stereo microscope (Leica Wild M32 FL4) equipped with a mercury high pressure photo-optic lamp (Leica Hg 50W/AC) and a GFP and RFP plus filters.
The population dynamics of S. plymuthica A30-GFP and DsRed-tagged Dickeya sp. IPO3012 after (co-)inoculation of potato slices was studied for a period of 3 days using pour plating.
The experiment was similar to that described in Example 7 and 8. Tuber wells were filled with a 50 μl suspension containing 1010 cfu ml−1 of A30 and 108 cfu ml−1 of Dickeya sp. IPO3012. Prepared potato slices were incubated at 28° C. in humid boxes for development of rotting. The experiment was independently repeated. To assess the densities of A30 and IPO3012 on potato slices, approx. 2 g of tuber tissue from 3 randomly chosen wells per treatment and per time point were collected daily and crushed in the presence of 4 ml of ¼ strength Ringer's buffer in Universal Extraction Bag (BIOREBA) using a hammer. 100 μl of undiluted and 1000 times and 10000 times diluted tuber extracts were mixed with pre-warmed to 48° C. NA supplemented with tetracycline (NAt) to the final concentration of 40 μg ml−1 and poured into the wells of 24-well plate (Greiner). After agar had solidified plates were covered with parafilm and incubated at 28° C. for 24-48 h for growth of bacterial colonies. GFP and DsRed tagged colonies were counted under an epifluorescence stereo microscope (Leica Wild M32 FL4) equipped with a mercury high pressure photo-optic lamp (Leica Hg 50W/AC) and a GFP and RFP plus filters.
The studies on population dynamics on potato slices co-inoculated with GFP-tagged S. plymuthica A30 and DsRed-tagged Dickeya sp. IPO3012 showed that the biocontrol agent is able to largely reduce populations of Dickeya sp. in potato slices just 2 days post application and completely eradicate Dickeya sp. from artificially inoculated tubers after 72 h. Control of biovar 3 Dickeya sp. by S. plymuthica A30 is the most effective at a close distance, possible by cell-to-cell contact.
Inoculation of Potato Tubers with DsRed-Tagged Dickeya sp. IPO3012 and Soil with GFP-Tagged S. plymuthica A30
Greenhouse experiments were conducted in the months of June-July and September-October. Suspensions of DsRed-tagged Dickeya sp. IPO3012 were prepared in sterile demineralized water to achieve densities of 106 cfu ml−1. Dickeya spp.-free minitubers of cv. Kondor (Dutch Plant Inspection Service for agricultural seeds and seed potatoes (NAK), Emmeloord, The Netherlands) were used. Minitubers were immersed in the suspension and vacuum infiltrated for 10 min at −800 mBar in an exicator followed by 10 min incubation at atmospheric pressure. Minitubers were infiltrated with sterile demineralized water only, served as negative controls. After inoculation tubers were dried in flow cabinet overnight and the next day they were planted in 5 L plastic pots in a sandy rich potato soil (2.9% of organic mater, 0.2% CaCO3, pH 6.4) collected from a potato field in Wageningen, The Netherlands.
Suspensions of GFP-tagged S. plymuthica A30 were prepared in sterile demineralized water to a density of 1010-1011 cfu ml−1. Planted tubers were watered with tap water 1 h before inoculation. Negative control tubers or Dickeya sp. IPO3012 inoculated tubers were inoculated with 50 ml of 1010-1011 cfu ml−1 GFP-tagged S. plymuthica A30 applied directly to the tuber before burying. Pots were kept dewatered 24 h after treatments. Pots were kept in the greenhouse at a 16/8 h photoperiod, 70% relative humidity and 28° C. for 4 weeks (28 days) after tuber planting. To eliminate the bias effect of growth conditions, a complete random block design of the pots was applied (3 blocks containing 10 pots for each treatment −40 pots in total per block). In each experiment, 30 Kondor minitubers were used per treatment. In total 120 plants were used: per replication and per time point we used 10 plants inoculated with Dickeya sp. IPO3012 (positive control), 10 plants inoculated with sterile water (negative control), 10 plants co-inoculated with Dickeya sp. IPO3012 and GFP-tagged S. plymuthica A30, and 10 plants inoculated with GFP-tagged S. plymuthica A30.
A suspension of the GFP-tagged S. plymuthica A30 was applied on the surface of the tubers previously infiltrated with DsRed-tagged Dickeya sp. IPO3012 directly after planting and just before covering tubers with soil to mimic an application at planting in the field. The possibility of the strain to colonize potato plants after tuber treatments was studied, to determine the potential of the antagonist for control of Dickeya in internal plant tissues.
In this study, the conditions for the greenhouse experiments were adjusted to be optimal for the pathogen and not for the biocontrol agent. The inventors sought to study the ability of the S. plymuthica A30 to protect potato plants from blackleg in a worst possible scenario. For this purpose, blackleg-susceptible potato cultivar Kondor were used and a high inoculum of Dickeya sp. was applied directly to potato tubers to ensure high blackleg incidences. The biovar 3 Dickeya sp. type strain was used because this is highly virulent and requires relatively high temperature and high humidity conditions to facilitate the infection process. The soil used in the experiments was collected from the potato field in order to mimic the natural field conditions. Nevertheless, S. plymuthica A30 was able to significantly reduce blackleg and affect Dickeya sp. densities in inoculated plants.
Symptom Development in Plants
Plants were visually inspected weekly for development of the symptoms, i.e. plants were assessed for non-emergence, wilting and chlorosis of leaves, black rot on the stem base, aerial stem rot, haulm desiccation and for plant death. In repeated greenhouse experiments, strain A30 reduced symptom expression by Dickeya by 100% and colonization of stems by biovar 3 Dickeya sp. by 97% after sequential inoculation of tubers by vacuum infiltration. Table 1 shows the accumulated results of three groups of 10 plants, destructively analyzed at 1, 7 and 28 days after inoculation, respectively.
Dickeya sp. and/or S. plymuthica and of water inoculated control
S. plymuthica
Dickeya sp.
a tubers were inoculated by vacuum infiltration with DsRed tagged Dickeya sp. IPO3012 and/or by treating tubers with a suspension of GFP-tagged S. plymuthica A30 during planting. Tubers were inoculated with water as a negative control.
b total number of plant screened
c total number of plant expressing disease symptoms (i.e. pre-emergence tuber rot, chlorosis and wilting of leaves, typical blackleg, plant death)
In plants inoculated with Dickeya sp. IPO3012, first symptoms appeared 7 days post inoculation, when shoots were ca. 5-7 cm and roots were ca. 8-12 cm. Infections with Dickeya sp. IPO3012 severely affected sprouting and development of treated plant. Sixty percent of the plants infected with Dickeya sp. in first and 20% of plants in the second experiment showed pre-emergence tuber rot, deteriorations of shoot and root growth and first typical blackleg symptoms starting to develop on young shoots (i. e. wilting and chlorosis of leaves, water lesion on the stem surface) at 7 days post inoculation. At 28 days post inoculation, 60% and 50% of plants inoculated with Dickeya sp. IPO3012 in experiment 1 and 2, respectively showed typical blackening and soft rotting near the base of the stems. Pre-emergence rot and development of blackleg symptoms were significantly reduced in plants co-inoculated with GFP-tagged A30 and DsRed-tagged Dickeya sp. IPO3012 strains. In the first experiment at 7 days post inoculation, only 10% of co-inoculated plants showed pre-emergence tuber rot and deterioration of shoot growth, however no disease symptoms were observed in co-inoculated plants at 28 days post inoculation. In the second experiment none of the co-inoculated plants showed pre-emergence tuber rot and blackleg symptoms during the entire course of the experiment.
Water inoculated control plants showed no symptoms during the entire course of both experiments (data not shown).
Colonization of Potato Plants by DsRed-Tagged Dickeya sp. IPO3012 and GFP-Tagged S. plymuthica A30 Followed by Epifluorescence Stereo Microscopy
To access knowledge about internal colonization of roots and stems, plant parts were also screened using epifluorescence stereo microscopy. For this, plant samples were collected at 28 days post inoculation. Eight roots with a length of at least 5-10 cm and 6 shoots (stems) were cut randomly from every inoculated and water-inoculated control plant. All samples were washed and sterilized before microscopic observations as described for NAt pour plating. Each root was cut into 2-3 cm and each stem into 0.5 cm long fragments. Fragments were embedded in NA, cooled down to 48° C. containing 40 μg ml−1 of tetracycline and 200 μg ml−1 of cycloheximide in petri dishes. After the medium had solidified the plates were sealed with parafilm and incubated for 1-2 days at 28° C. Plant parts harboring the green and/or red fluorescent signal were counted under an epifluorescence stereo microscope (Leica Wild M32 FL4) equipped with a mercury high pressure photo-optic lamp (Leica Hg 50W/AC) and a GFP and RFP plus filters. The number of plant samples showing typical green and/or red fluorescence was recorded as positive and fraction of positive samples was calculated for each treatment (see Table 2). Upon co-inoculation S. plymuthica A30 was able to decrease the Dickeya sp. colonization incidence in roots and stems or even eradicate the pathogen from inoculated plants.
S.
plymuthica
Dickeya sp.
apotato plants were inoculated by vacuum infiltration with DsRed tagged Dickeya sp. IPO3012, by soil infestation with GFP-tagged S. plymuthica A30 or co-inoculated with both strains, negative control were water inoculated plants grown in non infested soil
beight roots and six stem cuts were individually analyzed per plant and per time point
ctotal number of plant analyzed per treatment (n = 10)
dnumber of plant parts that were positive for a GFP or DsRed signal
Quantification of DsRed-Tagged Dickeya sp. IPO3012 and GFP-Tagged S. plymuthica A30 in Potato Tissues by Pour Plating
Population dynamics of GFP-tagged S. plymuthica A30 and DsRed-tagged Dickeya sp. IPO3012 in soil and in plant parts (i. e. tubers, shoots and roots) were examined by NA pour plating at different time points.
Plants were sampled 1, 7 and 28 days post inoculation. At each time point, 10 plants per treatment were sampled. Samples were randomly collected from each pot and separately suspended in 2 ml of ¼ Ringer's buffer supplemented with 0.02% dieethyldithiocarbamic acid (DIECA) as an oxidant. Hundred μl of the undiluted, 10 and 100 times diluted samples were mixed with NA supplemented with tetracycline to a final concentration of 40 μg ml−1 (NAt), pre-warmed to 48° C., and poured into the wells of a 24-well plate (Greiner). After agar had solidified, plates were wrapped with parafilm and incubated at 28° C. for 24-48 h for development of bacterial colonies. Plates were screened for GFP and/or DsRed positive colonies in the same way as it was done for interaction of GFP-tagged S. plymuthica A30 and Dickeya sp. IPO3012 on potato slices using a epifluorescence stereo microscope.
Per plant, seed tuber was collected and processed separately. Tubers were washed with tap water to remove soil particles, sterilized in 70% ethanol for 1 min, washed three times with water for 1 min, incubated in 1% sodium hypochloride (commercial bleach) for 4 min and finally washed three times with water for 4 min. Each tuber was crushed in an Universal Extraction Bag (BIOREBA) using a hammer. Extracts were diluted and pour plated as described for the soil samples.
Per plant, all shoots were collected and processed as a composite sample. Per plant, the total root system was processed. After external washing and sterilization of both stem (shoot) samples and total root system, extracts were prepared and pour plated in the same way as described for seed tubers.
Bacterial Populations in Tubers (see
Relatively low populations (average ca. 101 cfu g−1) of A30 were detected inside seed tubers at 1 days post inoculation. Populations increased in 7 days to 102-103 cfu g−1 and stabilized at this level till 28 days post inoculation. In co-inoculated plants, S. plymuthica A30 populations in tubers at 1 days post inoculation were on average 103 cfu g−1 but populations decreased to 102 cfu g−1 at 28 days. After tuber vacuum infiltration relatively high Dickeya sp. populations of 104 cfu g−1 were detected at 1 days post inoculation. At 28 days post inoculation populations were slightly declined to on average 103 cfu g−1. In co-inoculated plants, Dickeya sp. populations were significantly decreased from 104 cfu g−1 at 1 days post inoculation to on average 1 cfu g−1 or less at 28 days post inoculation.
Bacterial Populations in Roots (See
Bacterial populations in roots were analyzed only at 7 and 28 days post inoculation, as at 1 days post inoculation no roots were formed yet. At 7 days post inoculation, S. plymuthica A30 was present inside roots at a density of 102 cfu g−1. At 28 days post inoculation, the population increased to 103-104 cfu g−1. In co-inoculated plants the population dynamics of A30 followed the same trend. In Dickeya sp. IPO3012 inoculated plants, low Dickeya sp. populations (average less than 101 cfu g−1) inside roots were found at 7 days post inoculation. Populations increased slightly to 101-102 cfu g−1 at 28 days post inoculation. In co-inoculated plants, no Dickeya sp. was detected in roots at 7 days post inoculation. At 28 days post inoculation, only very low populations on average 1 cfu g−1 were detected.
Bacterial Populations in Shoots (See
Bacterial populations in shoots were analyzed only at 7 and 28 days post inoculation, as at 1 days post inoculation no shoots were formed yet. At 7 days post inoculation, S. plymuthica A30 was already present inside shoots at a density of 102 cfu g−1. At 28 days post inoculation, the population increased 10 times. In co-inoculated plants the population dynamics of A30 followed the same trend. At 7 days post inoculation, in co-inoculated plants low densities of Dickeya sp. IPO3012 were detected in shoots of 5-10 cfu g−1. Populations increased to a density of 102-103 at 28 days post inoculation. In co-inoculated plants on average less than 10 cfu g−1 of Dickeya sp. was present at 7 days post inoculation and no Dickeya sp. IPO3012 was detected in stems at 28 days post inoculation.
Sampling of Potato Plants for Confocal Laser Scanning Microscopy (CLSM) to Show Bacterial Colonization
For microscopy, plant samples were collected at the same time points as for the NA pour plating; that is 1, 7 and 28 days after inoculation. Eight roots with a length of at least 5-10 cm and 3 shoots (stems) were cut randomly from every inoculated plant. All samples were washed and sterilized before microscopic observations as described for NA pour plating.
Each root was cut into 2-3 cm and each stem into 0.5 cm long fragments. Fragments were embedded in NA, cooled down to 48° C. containing 40 μg ml−1 of tetracycline and 200 μg ml−1 of cycloheximide in petri dishes. After the medium had solidified the plates were sealed with parafilm and incubated for 1-2 days at 28° C. After this time plant samples were collected from agar plates, washed briefly in demineralized sterile water and examined under the CLSM microscope. To monitor bacterial populations on the root surface, four roots per plant were processed without surface sterilization and without embedding.
For visualization of the plant cells, a 405 nm (excitation) ultraviolet laser and a 450 nm emission filter was used. For excitation of the GFP and DsRed in bacterial cells a 495 nm and 532 nm blue and green laser were used, respectively. For GFP, a 505 nm and for DsRed a 610 nm emission filter was used, respectively. Photographs were taken with a Leica Digital System (Leica) combined with a CLSM microscope using 10× and 63× water immersion objectives.
Plant parts were analyzed 7 and 28 days post inoculation, with a CLSM at a magnification of 640 and 1000 times. Detailed studies on the localization of the GFP-tagged S. plymuthica A30 and DsRed-tagged Dickeya sp. IPO3012 showed that at 7 days post inoculation both bacteria species were present inside the vascular tissue of the roots in pith (in medulla and cortex) both intra- and intercellularly (see
At 28 days post inoculation, in Dickeya sp. inoculated plants, DsRed-tagged bacteria were present inside and between pith cells of roots and inside and between xylem vessels of stems (see
In plants inoculated with S. plymuthica A30, GFP-tagged bacteria were present inside and between parenchyma cells of roots and in xylem vessels of stems (see
A30 appears to outcompete Dickeya in internal tissues of seed tuber, roots and stems. Dickeya was present in plant tissue at 7 days after inoculation but not at 28 days after inoculation.
Colonization of Root Surface by GFP-Tagged S. plymuthica A30 followed by CLSM
The ability of GFP-tagged S. plymuthica A30 to colonize roots of potato plants were tested, by analyzing randomly selected roots from S. plymuthica A30 inoculated plants at 28 days after inoculation using CLSM. All roots of plants grown in A30 inoculated tubers were surfacially colonized by GFP-tagged S. plymuthica A30 (see
In none of water control plants GFP-tagged bacteria on root surface were detected (see
The results of the microscopic examinations showed that strain A30 is an endophyte as well as a rhizosphere colonizer. The strain was found in both roots (see
| Number | Date | Country | Kind |
|---|---|---|---|
| 1100427.2 | Jan 2011 | GB | national |
| Filing Document | Filing Date | Country | Kind | 371c Date |
|---|---|---|---|---|
| PCT/EP2012/050320 | 1/10/2012 | WO | 00 | 9/13/2013 |
