Provided herein are therapeutic compositions and related methods, specifically a shear-thinning dosage form and related methods.
Proteins are useful therapeutic agents for a variety of purposes. In the context of regenerative medicine, proteins and polypeptides play key roles in tissue regeneration by promoting cell proliferation, migration and differentiation to restore a diseased or damaged tissue. But the short half-life of exogenous proteins, particularly growth factors, limits the therapeutic efficacy if administered as free proteins. Heparin binds more than 400 proteins and peptides, and the resultant complex can stabilize proteins from proteolysis and prolong their bioactivity. However, typical heparin-protein complexes are soluble in water, making spatial and temporal control of delivery difficult.
LAPONITE® has been widely used in food, cosmetic and pharmaceutical industries as additives, rheological modifier or active ingredients. LAPONITE® is able to generate a stable nanoplatelet dispersion with uniform particle size (25 nm diameter and 0.92 nm thickness), large surface area (>350 m2 g−1), specific surface charges and certain bioactive properties (Gaharwar A K, et al., Adv Mater. 2013; 25:3329-36 and Dawson J I, et al. Clay gels for the delivery of regenerative microenvironments. Adv Mater. 2011; 23:3304-8). For example, in several recent reports, in vitro studies showed that the LAPONITE® dispersion or gel could facilitate chondrogenic differentiation of human bone marrow stromal cells (hBSMCs) or promote osteogenetic differentiation of human mesenchymal stem cells (hMSCs) (Gaharwar A K, et al., Adv Mater. 2013; 25:3329-36 and Dawson J I, et al. Adv Mater. 2011; 23:3304-8). The LAPONITE® dispersion can self-organize into “house-of-cards” gel through face-to-edge interaction with gelation rate dependent on its concentration (See
Such LAPONITE® dispersion can either directly absorb biomolecules for delivery or complex with other synthetic or natural biopolymers to form injectable nanocomposite hydrogels for cell or drug delivery. However, when it is used for controlled release of bioactive proteins, the strong absorption on LAPONITE® particles makes release of the proteins difficult, defeating the purpose of controlled release. Though many biomaterials, such as alginate, collagen, hyaluronic acid and chitosan, have been used to mix with LAPONITE® to form injectable hydrogels for drug delivery (Xavier J R, et al. Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach. ACSNANO. 2015; 9:3109-18, Divya Bhatnagar D X, et al. Hyaluronic Acid and Gelatin Clay Composite. Journal of Chemical and Biological Interfaces. 2014; 2:1-11; Li Y, et al. pH sensitive LAPONITE®/alginate hybrid hydrogels: swelling behaviour and release mechanism. Soft Matter. 2011; 7:6231; and Yang H, et al. Composite Hydrogel Beads Based on Chitosan and LAPONITE®: Preparation, Swelling, and Drug Release Behaviour. Iranian Polymer Journal. 2011; 20:479-90), those biomaterials cannot protect the proteins from proteolysis and prolong their bioactivity.
A composition and related methods are provided herein to take advantage of the unique properties of heparin and other compositions, such as sulfated or sulfamated compositions that bind to therapeutic active agents (therapeutic agents). According to aspects, a hydrogel is provided that is assembled from silicate platelet nanoparticle (e.g., LAPONITE® or other days), a gelling agent, such as heparin, and a therapeutic agent, such as a heparin-binding angiogenic agent or growth factor, e.g., fibroblast growth factor-2 (FGF2). The gel is rapidly-assembled, for example within one minute—resulting in a shear thinning hydrogel comprising a three-dimensional nanocomposite network formed in aqueous solution based on non-covalent reversible crosslinks.
In aspects, the shear thinning hydrogel is designed to bear functional moieties for forming physical, non-covalent crosslinks, such as hydrogen bonding, ionic interaction, host-guest chemistry, hydrophobic interaction or combination of multiple physical interactions in one system. Gelling agents such as biopolymers, for example and without limitation sulfated or sulfamated polysaccharides or sulfated or sulfamated glycosaminoglycans, can directly bind to silica nanoparticles, such as LAPONITE® platelets, to generate injectable hydrogels. The interaction between the gelling agent and the day particles form injectable hydrogels having a large surface area, specific surface charges and strong binding abilities to a variety of therapeutic agents, such as proteins, peptides, and oligopeptides. In contrast to covalently-crosslinked injectable hydrogels, shear thinning hydrogels are also injectable but do not need any triggers to initiate a chemical reaction for in situ gelation—which can exhibit toxicity to the surrounding tissues by virtue of the cross-linkers and/or the crosslinking chemistries. In the described compositions, the drugs, e.g., biologics, peptides, proteins, oligopeptides, peptide nucleic acids, or nucleic acids, can be fully loaded into a shear thinning gel and the gel-sol transition during injection occurs only at the interface between the hydrogel and needle wall. Thus the drug is less likely to leak out, leading to more precise control over dosage and release kinetics of the drug.
According to one aspect, a shear-thinning therapeutic composition is provided. In one aspect, the shear-thinning therapeutic composition comprises: silicate platelets; a gelling agent non-covalently linking the platelets to form a shear-thinning composition; and a therapeutic agent that binds non-covalently to the gelling agent and that is complexed non-covalently with the gelling agent.
In other aspects, the composition comprises natural or synthetic silicate platelets (e.g., LAPONITE®); a sulfated or sulfamated polymer non-covalently linking the platelets to form a shear-thinning composition; and a therapeutic agent that is binding partner of the sulfated or sulfamated polymers or oligomers complexed non-covalently with the sulfated or sulfamated polymers or oligomers. Optionally, the composition comprises natural or synthetic silicate platelets; a gelling agent that is one or more of a cationic amino acid; an anionic amino acid; a hydrophilic amino acid; and a polypeptide, optionally an oligopeptide, comprising from 2 to 10 amino acids or from 2 to 6 amino acids and including a plurality of cationic, anionic, or hydrophilic amino acids non-covalently linking the platelets to form a shear-thinning composition; and a therapeutic agent dispersed within the composition and/or complexed non-covalently with the silicate platelets and/or the one or more of a cationic amino acid; an anionic amino acid; a hydrophilic amino acid; a polypeptide, optionally an oligopeptide, comprising from 2 to 10 amino acids or from 2 to 6 amino acids and including a plurality of cationic, anionic, or hydrophilic amino acids. Methods of making the therapeutic composition, and methods of using the therapeutic composition, for example and without limitation to induce angiogenesis or as a soft tissue filler in a patient, also are provided.
The use of numerical values in the various ranges specified in this application, unless expressly indicated otherwise, are stated as approximations as though the minimum and maximum values within the stated ranges are both preceded by the word “about”. In this manner, slight variations above and below the stated ranges can be used to achieve substantially the same results as values within the ranges. Also, unless indicated otherwise, the disclosure of these ranges is intended as a continuous range including every value between the minimum and maximum values. For definitions provided herein, those definitions refer to word forms, cognates and grammatical variants of those words or phrases. As used herein “a” and “an” refer to one or more.
As used herein, the term “patient” or “subject” refers to members of the animal kingdom including but not limited to human beings and “mammal” refers to all mammals, including, but not limited to human beings.
As used herein, the “treatment” or “treating” of a wound or defect means administration to a patient by any suitable dosage regimen, procedure and/or administration route of a composition, device or structure with the object of achieving a desirable clinical/medical end-point, including attracting progenitor cells, healing a wound, correcting a defect, etc.
As used herein, the terms “comprising,” “comprise” or “comprised,” and variations thereof, are open ended and do not exclude the presence of other elements not identified. In contrast, the term “consisting of” and variations thereof is intended to be closed, and excludes additional elements in anything but trace amounts.
By “biocompatible”, it is meant that a device, scaffold composition, etc. is essentially, practically (for its intended use) and/or substantially non-toxic, non-injurious or non-inhibiting or non-inhibitory to cells, tissues, organs, and/or organ systems that would come into contact with the device, scaffold, composition, etc.
As used herein, the term “polymer composition” is a composition comprising one or more polymers. As a class, “polymers” includes, without limitation, homopolymers, heteropolymers, co-polymers, block polymers, block co-polymers and can be both natural and synthetic. Homopolymers contain one type of building block, or monomer, whereas co-polymers contain more than one type of monomer. An “oligomer” is a polymer that comprises a small number of monomers, such as, for example, from 3 to 100 monomer residues. As such, the term “polymer” includes oligomers. The term polypeptide includes polypeptides and oligopeptides.
A polymer “comprises” or is “derived from” a stated monomer if that monomer is incorporated into the polymer. Thus, the incorporated monomer that the polymer comprises is not the same as the monomer prior to incorporation into a polymer, in that at the very least, certain linking groups are incorporated into the polymer backbone or are removed in the polymerization process. A polymer is said to comprise a specific type of linkage if that linkage is present in the polymer. An incorporated monomer is a “residue”.
A “hydrogel” is a water insoluble, three-dimensional network of polymer chains, and in the context of the present invention, silicate platelets, plus water that fills the voids between the polymer chains. Hydrogels are mostly water (the mass fraction of water is much greater than that of polymer). They do not flow, but they allow small molecules to diffuse, so long as those small molecules do not bind the platelets or polymer. The hydrogels described herein are shear-thinning, meaning that they are non-Newtonian fluids that lose viscosity under shear strain, such as a stirring force, or forces encountered in a medical syringe when the plunger is moved.
In one aspect a shear-thinning composition as described herein is used as a carrier for release of a therapeutic agent e.g., for therapeutic purposes. In one aspect, the therapeutic agent binds to a gelling agent, such as a sulfated or sulfamated polymer or an anionic or cationic composition, such as a polyanionic or polycationic oligopeptide. In one aspect, the therapeutic agent binds specifically or non-specifically to a sulfated or sulfamated polymer. In one example, a therapeutic agent is combined into the shear thinning composition, and the composition is then implanted in a patient or otherwise administered to the patient, for example, by injection or application to a wound or another site in a patient suitable for delivery of the therapeutic agent. The therapeutic agent is added to the other ingredients in the shear-thinning composition by mixture with the gelling agent, such as a sulfated or sulfamated polymer, and the silicate platelets, or by adsorption to or absorption into a gel formed by the gelling agent and the silicate platelets. Generally, the therapeutic agents include any substance that can be mixed with, embedded into, absorbed into, adsorbed to, or otherwise attached to or incorporated onto or into the composition described herein or incorporated into a drug product that would provide a therapeutic benefit to a patient. Non-limiting examples of such therapeutic agents include growth factors, cytokines, chemoattractants, antimicrobial agents, emollients, retinoids, antibodies and fragments thereof, and topical steroids. Each therapeutic agent may be used alone or in combination with other therapeutic agents. For example and without limitation, a composition comprising angiogenic agents may be applied to a wound.
In one aspect, a shear-thinning therapeutic composition is provided. The composition comprises: silicate platelets, a gelling agent, such as a sulfated or sulfamated polymer, non-covalently linking the platelets to form a shear-thinning composition; and a therapeutic agent that non-covalently binds to, specifically or non-specifically, the gelling agent and/or the platelets. For example, the therapeutic agent is non-covalently bound to sulfated or sulfamated polymer complexed non-covalently with the silicate platelets to form a shear-thinning gel.
According to certain aspects, the ratio of therapeutic agent to the gelling agent, such as a sulfated or sulfamated polymer, e.g. heparin, ranges from 1:16000 to 1:1 by weight. In one aspect, the ratio of therapeutic agent to the gelling agent, such as a sulfated or sulfamated polymer, e.g. heparin, ranges from 1:8000 to 1:3. In a further aspect, the ratio of therapeutic agent to the gelling agent, such as a sulfated or sulfamated polymer, e.g. heparin, ranges from 1:1520 up to 1:3 by weight.
According to certain aspects, the ratio of the gelling agent, such as a sulfated or sulfamated polymer, e.g. heparin, to the silicate platelets, e.g. LAPONITE®, ranges from 1:10 to 1:1 by weight. For example, seen below, heparin-LAPONITE® gels are prepared from 1.9+19 mg/mL to 19+19 mg/mL of heparin+LAPONITE®, resulting in rapid gelation. In one aspect, a ratio of sulfated or sulfamated polymer, e.g. heparin to LAPONITE® is 1.9+19 mg/mL to 9.5+19 mg/mL, or a sulfated or sulfamated polymer, e.g. heparin, to LAPONITE® ratio of from 1:10 to 1:2 is used. Such H/L weight ratio is applicable to other combinations of sulfated or sulfamated polymer with LAPONITE®, or other silicate platelet compositions.
In aspects, the LAPONITE® concentration ranges from 10 mg/mL to 80 mg/mL (1% to 8%), and in certain aspects from 15 mg/mL to 50 mg/mL (1.5% to 5.0%).
The above ratios of therapeutic agent to gelling agent, such as a sulfated or sulfamated polymer, e.g. heparin, to silicate platelets are based on studies of FGF2, heparin, and LAPONITE®. These results can be generalized to other therapeutic agents, other gelling agent, such as sulfated or sulfamated polymers, and other silicate platelets.
In the examples below, controlled release is demonstrated by loading 500 ng FGF2 in 525 μL of heparin-LAPONITE® gels to form FGF2-heparin-LAPONITE® gels at 0.00095+3.8+19 mg/mL, 0.00095+7.6+19 mg/mL and 0.00095+15.2+19 mg/mL. The FGF2 to heparin to LAPONITE® weight ratios in these three formulations are 1:4000:20000, 1:8000:20000 and 1:16000:20000. FGF2-heparin-LAPONITE® gel at 0.00095+7.6+19 mg/mL showed almost 100% release in 34 days. Therefore, in one aspect, a protein to heparin ratio of 1:8000 is selected.
In the in vivo angiogenesis study below, 50 and 500 ng FGF2 was loaded in 100 μL of heparin-LAPONITE® gel to form FGF2-heparin-LAPONITE® gels at 0.0005+7.6+19 mg/mL and 0.005+7.6+19 mg/mL. The subcutaneous implantation with 500 ng FGF2-loaded heparin-LAPONITE® gel showed strong angiogenesis efficacy. Therefore in one aspect, a protein to heparin ratio of 1:1520 used for an in vivo angiogenesis study in a mouse model, and in others aspect a protein to heparin ratio range from 1:1520 to 1:3 by weight is provided.
As used herein, silicate platelets are found naturally in silica clays (natural platelets) or can be manufactured (synthetic platelets). Silicate clays are phyllosilicates (sheet silicates). In nature, the sheets often are microparticles (from 1 to 1000 microns in its largest cross-section) and/or nanoparticles (from 1 to 1000 nanometers in its largest cross-section). Phyllosilicate clay particles are plate-like particles having a perimeter shape that is generally rounded (e.g., circular, elliptical, or oval), polyhedral (e.g., hexagonal), or any closed figure, and are referred to as platelets (see, e.g.
In one aspect, the silicate platelets are LAPONITE®. LAPONITE® (hydrous sodium lithium magnesium silicate) is a synthetic crystalline layered silicate colloid with crystal structure and composition closely resembling the natural smectite clay hectorite. When dispersed in water, LAPONITE® hydrates and swells to form a clear colloidal dispersion with the Na+ ions forming double layers on the faces. The pH for a 2% LAPONITE® suspension in pure water is ˜9.8. At low ionic strength, electrostatic repulsion keeps the particles apart. LAPONITE® is decomposed by acids, leading to an increase in ion concentration with time at low pH. At concentrations of 2% or greater in water a gel will form rapidly. LAPONITE® gel is strongly thixotropic, i.e. its viscosity decreases rapidly under shear. After the shear stress is removed, the gel reforms; the rate of restructuring depends on composition, electrolyte level, age of the dispersion, and temperature. The addition of salts reduces the thickness of the electrical double layer, promoting gel formation (Cummins H Z, Liquid, glass, gel: The phases of colloidal LAPONITE®, Journal of Non-Crystalline Solids 353 (2007) 3891-3905).
LAPONITE® XLG (Na+0.7[(Si7Mg5.5Li0.3)O20(OH)4]−0.7), a synthetic silicate, is a plate-like nanoparticle with negatively charged surface and positively charged edge (Cummins H Z., Journal of Non-Crystalline Solids. 2007; 353:3891-905). LAPONITE® shows good biocompatibility and biodegrades into non-toxic and bioabsorbable byproducts of Na+, Mg2+, Si(OH)4 and Li+ (Gaharwar A K, et al., Bioactive silicate nanoplatelets for osteogenic differentiation of human mesenchymal stem cells. Adv Mater. 2013; 25:3329-36).
A gelling agent is used herein to non-covalently bind to or complex with the silicate platelets in the shear-thinning composition.
In one aspect, the gelling agent is a sulfated or sulfamated polymer. In one aspect, the sulfated or sulfamated polymer is a sulfated or sulfamated polysaccharide or oligosaccharide. Synthetic and natural sulfated or sulfamated polysaccharides include oligosaccharides, and further include, for example and without limitation, sulfated glycosaminoglycans or sulfated galactans, ulvans and fucans (See, e.g., Jiao, G., et al. Chemical Structures and Bioactivities of Sulfated Polysaccharides from Marine Algae (2011) Mar. Drugs 9:196-223). Non-limiting examples of sulfated or sulfamated polysaccharides include, pentosan polysulfates, dermatan sulfates, keratan sulfates, chondroitin sulfates, sulfated agarans (e.g., porphyrans), and carageenans.
By “sulfated”, it is meant that the polymer comprises one or more pendant sulfate (—OSO3) groups. By “sulfamated” it is meant one or more pendant sulfamate (—NSO3) groups. By “sulfated or sulfamated” it is meant a polymer comprises one or more sulfate groups, one or more sulfamate groups, or one or more each of sulfate groups and sulfamate groups. Examples of suitable sulfated or sulfamated polysaccharides include, without limitation: a sulfated polysaccharide, a sulfamated polysaccharides, a sulfated or sulfamated polydisaccharide, a sulfated glycosaminoglycan, heparin, and heparan sulfate (see, e.g.,
In another aspect, the sulfated or sulfamated polymer is a sulfated or sulfamated synthetic polymer, such as a polyurethane, polyester, polyurea, polyamide-ester, polyether, polycarbonate, polyamide, or polyolefin, or copolymers thereof, as are broadly-known in the polymer arts. In another aspect, the sulfated or sulfamated polymer comprises at least one moiety selected from the following:
[—OC(O)—CH(NHY)—CH2—C(O)O—CH2—CH(O—R1)-CH2—O—CH2—CH2—O—CH2—CH(O—R2)-CH2-]n (a)
[—OC(O)—CH2—CH(NHY)—C(O)O—CH2—CH(O—R1)-CH2—O—CH2—CH2—O—CH2—CH(O—R2)-CH2-]n (b)
[—OC(O)—CH(NHY)—CH2—CH2—C(O)O—CH2-CH(O—R1)-CH2—O—CH2—CH2—O—CH2—CH(O—R2)-CH2-]n, and/or (c)
[—OC(O)—CH2—CH2—CH(NHY)—C(O)O—CH2—CH(O—R1)-CH2—O—CH2—CH2—O—CH2—CH(O—R2)-CH2-]n, (d)
wherein Y is —C(O)—CH(NH3+)—(CH2)3—NH—C(NH2)2+ or —C(O)—CH(NH3+)—(CH2)4—(NH3)+, n>1, and R1 and R2 are the same or different and are independently selected from the group consisting of sulfate-containing groups and sulfamate-containing groups, with the composition having an overall negative charge. A sulfate-containing group is a moiety (portion of a molecule) comprising at least one pendant sulfate group. A sulfamate-containing group is a moiety (portion of a molecule) comprising at least one pendant sulfamate group.
In other aspects, the gelling agent is a cationic or anionic compound. Cationic and anionic molecules include the water soluble amino acids such as lysine, arginine, glutamic acid, aspartic acid, and hydrophilic amino acids, including glutamine, histidine, asparagine, serine, tyrosine, threonine and other water soluble amino acids; cationic oligo-peptides, such as the dimer, trimer, tetramer, pentamer and hexamer etc. of the above mentioned cationic amino acids, optionally comprising a plurality of the above mentioned cationic amino acids, such as poly(arginine) or poly(lysine); anionic oligo-peptides and polypeptides, e.g., of above mentioned anionic amino acids, optionally comprising a plurality of the above mentioned anionic amino acids, such as poly(glutamic acid) or poly(aspartic acid); and hydrophilic oligo-peptides and polypeptides, e.g., of above mentioned hydrophilic amino acids. In one aspect, oligomers of cationic amino acids are from 2 to 10, or optionally from 2 to 6 amino acids. Oligomers or polypeptides of anionic amino acid, or hydrophilic amino acids, or poly (anionic amino acids), or poly(hydrophilic amino acids), or combinations thereof are expected to have no limitation as to the number of amino acids in a peptide sequence.
Gelling agents according to any aspect described herein, may be modified to include biologically active groups or therapeutic agents covalently bound (attached) to the polymer structure in addition to the non-covalent inclusion of a therapeutic agent into the shear-thinning composition.
In preparation of the shear-thinning composition as described herein, a therapeutic agent is admixed with the gelling agent and silicate platelets in any order that allows for formation of a shear-thinning composition. In one aspect, the therapeutic agent is first mixed with the gelling agent, e.g., the sulfated or sulfamated polymer, according to any aspect described herein, and then is mixed with the silicate platelets, according to any aspect described herein, to form a shear-thinning composition, e.g., a hydrogel. Therapeutic agents may be combined in safe and effective amounts. Therapeutic agents that are strongly hydrophobic and/or non-polar might not combine directly to the sulfated or sulfamated polymer, but are expected to do so when combined with a pharmaceutically-acceptable excipient that is charged or otherwise compatible with the system as described herein, or when modified to include hydrophilic or charged groups—so long as the composition retains its pharmacological activity. In one aspect a therapeutic agent, e.g., a hydrophobic therapeutic agent or a therapeutic agent that is not otherwise compatible by itself with the shear thinning composition according to any aspect described herein, is first combined with a cyclodextrin, as are broadly-known in the drug delivery arts.
Salt forms of many of therapeutic agents can be utilized, though the salt counterion may need to be removed to avoid interfering with gelation of the composition described herein. Alternatively, the salt counterion does not need to be removed, but the salt counterion concentration should permit loading and gelling of the composition and formation of a shear-thinning composition. In one aspect, a combination dosage form is provided that is a shear-thinning composition comprising: a gelling agent, e.g. a sulfated or sulfamated polymer, in any aspect described herein; a first therapeutic agent that binds the gelling agent, e.g. the sulfated or sulfamated polymer, for example, where the sulfated or sulfamated polymer is heparin or heparan sulfate, the first therapeutic agent is a member of the heparin interactome; silicate platelets, according to any aspect described herein; and a second therapeutic agent that is any therapeutic agent that does not substantially interfere with formation of the shear-thinning composition. In one aspect, the second therapeutic agent is any therapeutic agent that does not interfere with the formation of a shear-thinning composition, such as a hydrogel. In another aspect, the second therapeutic agent does not bind to the gelling agent, e.g. the sulfated or sulfamated polymer. In yet another aspect, the second therapeutic agent binds specifically to the sulfated or sulfamated polymer. In a further aspect, the sulfated or sulfamated polymer is heparin or heparan sulfate, and the second therapeutic agent is a member of the heparin interactome. Additional therapeutic agents may be combined in the composition, so long as the composition remains shear-thinning.
Therapeutic agents that may be incorporated, by themselves, or in combination with a suitable excipient, into the compositions described herein include, without limitation, anti-inflammatories, such as, without limitation, NSAIDs (non-steroidal anti-inflammatory drugs) such as salicylic acid, indomethacin, sodium indomethacin trihydrate, salicylamide, naproxen, colchicine, fenoprofen, sulindac, diflunisal, didofenac, indoprofen sodium salicylamide, antiinflammatory cytokines, and antiinflammatory proteins or steroidal anti-inflammatory agents); antibiotics; anticlotting factors such as heparin, Pebac, enoxaprin, aspirin, hirudin, plavix, bivalirudin, prasugrel, idraparinux, warfarin, coumadin, clopidogrel, PPACK, GGACK, tissue plasminogen activator, urokinase, and streptokinase; growth factors. Other therapeutic agents include, without limitation: (1) immunosuppressants; glucocorticoids such as hydrocortisone, betamethisone, dexamethasone, flumethasone, isoflupredone, methylpred-nisolone, prednisone, prednisolone, and triamcinolone acetonide; (2) antiangiogenics such as fluorouracil, paclitaxel, doxorubicin, cisplatin, methotrexate, cyclophosphamide, etoposide, pegaptanib, lucentis, tryptophanyl-tRNA synthetase, retaane, CA4P, AdPEDF, VEGF-TRAP-EYE, AG-103958, Avastin, JSM6427, TG100801, ATG3, OT-551, endostatin, thalidomide, becacizumab, neovastat; (3) antiproliferatives such as sirolimus, paclitaxel, perillyl alcohol, famesyl transferase inhibitors, FPTIII, L744, antiproliferative factor, Van 10/4, 5-FU, Daunomycin, Mitomycin, dexamethasone, azathioprine, chlorambucil, methotrexate, mofetil, vasoactive intestinal polypeptide, and PACAP; (4) antibodies; (5) drugs acting on immunophilins, such as cyclosporine, zotarolimus, everolimus, tacrolimus and sirolimus (rapamycin), interferons, TNF binding proteins; (6) taxanes, such as docetaxel; statins, such as atorvastatin, lovastatin, simvastatin, pravastatin, fluvastatin and rosuvastatin; (7) nitric oxide donors or precursors, such as, without limitation, Angeli's Salt, L-Arginine, Free Base, Diethylamine NONOate, Diethylamine NONOate/AM, Glyco-SNAP-1, Glyco-SNAP-2, S-Nitroso-N-acetylpenicillamine, S-Nitrosoglutathione, NOC-5, NOC-7, NOC-9, NOC-12, NOC-18, NOR-1, NOR-3, SIN-1, Sodium Nitroprusside, Dihydrate, Spermine NONOate, Streptozotocin; and (8) antibiotics, such as, without limitation: acyclovir, afloxacin, ampicillin, amphotericin B, atovaquone, azithromycin, ciprofloxacin, clarithromycin, clindamycin, clofazimine, dapsone, didazaril, doxycycline, erythromycin, ethambutol, fluconazole, fluoroquinolones, foscamet, ganciclovir, gentamicin, iatroconazole, isoniazid, ketoconazole, levofloxacin, lincomycin, miconazole, neomycin, norfloxacin, ofloxacin, paromomycin, penicillin, pentamidine, polymixin B, pyrazinamide, pyrimethamine, rifabutin, rifampin, sparfloxacin, streptomycin, sulfadiazine, tetracycline, tobramycin, trifluorouridine, trimethoprim sulphate, Zn-pyrithione, ciprofloxacin, norfloxacin, afloxacin, levofloxacin, gentamicin, tobramycin, neomycin, erythromycin, trimethoprim sulphate, polymixin B and silver salts such as chloride, bromide, iodide and periodate.
Any useful cytokine or chemoattractant can be mixed into, mixed with, or otherwise combined with any composition as described herein. For example and without limitation, useful components include growth factors, interferons, interleukins, chemokines, monokines, hormones, and angiogenic factors. In certain non-limiting aspects, the therapeutic agent is a growth factor, such as a neurotrophic or angiogenic factor, which optionally may be prepared using recombinant techniques. Non-limiting examples of growth factors include basic fibroblast growth factor (bFGF), acidic fibroblast growth factor (aFGF), vascular endothelial growth factor (VEGF), hepatocyte growth factor (HGF), insulin-like growth factors 1 and 2 (IGF-1 and IGF-2), platelet derived growth factor (PDGF), stromal derived factor 1 alpha (SDF-1 alpha), nerve growth factor (NGF), ciliary neurotrophic factor (CNTF), neurotrophin-3, neurotrophin-4, neurotrophin-5, pleiotrophin protein (neurite growth-promoting factor 1), midkine protein (neurite growth-promoting factor 2), brain-derived neurotrophic factor (BDNF), tumor angiogenesis factor (TAF), corticotrophin releasing factor (CRF), transforming growth factors α and β (TGF-α and TGF-β), interleukin-8 (IL-8), granulocyte-macrophage colony stimulating factor (GM-CSF), interleukins, and interferons. Commercial preparations of various growth factors, including neurotrophic and angiogenic factors, are available from R & D Systems, Minneapolis, Minn.; Biovision, Inc, Mountain View, Calif.; ProSpec-Tany TechnoGene Ltd., Rehovot, Israel; and Cell Sciences®, Canton, Mass.
Non-limiting examples of angiogenic therapeutic agents include: erythropoietin (EPO), basic fibroblast growth factor (bFGF), acidic fibroblast growth factor (aFGF), fibroblast growth factor-2 (FGF-2), granulocyte colony stimulating factor (G-CSF), granulocyte macrophage colony stimulating factor (GM-CSF), hepatocyte growth factor (HGF), insulin-like growth factors 1 and 2 (IGF-1 and IGF-2), placental growth factor (PIGF), platelet derived growth factor (PDGF), stromal derived factor 1 alpha (SDF-1 alpha), vascular endothelial growth factor (VEGF), angiopoietins (Ang 1 and Ang 2), matrix metalloproteinase (MMP), delta-like ligand 4 (DII4), and class 3 semaphorins (SEMA3s), all of which are broadly-known, and are available from commercial sources.
In certain non-limiting aspects, the therapeutic agent is an antimicrobial agent, such as, without limitation, isoniazid, ethambutol, pyrazinamide, streptomycin, clofazimine, rifabutin, fluoroquinolones, ofloxacin, sparfloxacin, rifampin, azithromycin, clarithromycin, dapsone, tetracycline, erythromycin, ciprofloxacin, doxycycline, ampicillin, amphotericin B, ketoconazole, fluconazole, pyrimethamine, sulfadiazine, clindamycin, lincomycin, pentamidine, atovaquone, paromomycin, diclazaril, acydovir, trifluorouridine, foscamet, penicillin, gentamicin, ganciclovir, iatroconazole, miconazole, Zn-pyrithione, and silver salts such as chloride, bromide, iodide and periodate.
In certain non-limiting aspects, the therapeutic agent is an anti-inflammatory agent, such as, without limitation, an NSAID, such as salicylic acid, indomethacin, sodium indomethacin trihydrate, salicylamide, naproxen, colchicine, fenoprofen, sulindac, diflunisal, diclofenac, indoprofen, sodium salicylamide; an anti-inflammatory cytokine; an anti-inflammatory protein; a steroidal anti-inflammatory agent; or an anti-clotting agents, such as heparin. Other drugs that may promote wound healing and/or tissue regeneration may also be included.
Non-limiting examples of antiangiogenic agents include: Macugen (pegaptanib sodium); Lucentis; Tryptophanyl-tRNA synthetase (TrpRS); AdPEDF; VEGF TRAP-EYE; AG-013958; Avastin (bevacizumab); JSM6427; TG100801; ATG3; Perceiva (originally sirolimus or rapamycin); E10030, ARC1905 and colociximab (Ophthotech) and Endostatin. Ranibizumab is currently the standard in the United States for treatment of neovascular AMD. It binds and inhibits all isoforms of VEGF. Although effective in many cases, treatment with ranibizumab requires sustained treatment regimens and frequent intravitreal injections. VEGF Trap is a receptor decoy that targets VEGF with higher affinity than ranibizumab and other currently available anti-VEGF agents. Blocking of VEGF effects by inhibition of the tyrosine kinase cascade downstream from the VEGF receptor also shows promise, and includes such therapies as vatalanib, TG100801, pazopanib, AG013958 and AL39324. Small interfering RNA technology-based therapies have been designed to downregulate the production of VEGF (bevasiranib) or VEGF receptors (AGN211745). Other potential therapies include pigment epithelium-derived factor-based therapies, nicotinic acetylcholine receptor antagonists, integrin antagonists and sirolimus. (See, e.g., Chappelow, A V, et al. Neovascular age-related macular degeneration: potential therapies, Drugs. 2008; 68(8):1029-36 and Barakat M R, et al. VEGF inhibitors for the treatment of neovascular age-related macular degeneration, Expert Opin Investig Drugs. 2009 May; 18(5):637-46.
In another aspect, antioxidants are added to the polymeric composition, such as organic or inorganic antioxidants. In one aspect, the antioxidant is a nanoparticle incorporated by any means into the polymer composition, such as, for example, a cerium nanoparticle. As an example, an anisotropic heart valve or heart valve leaflet prosthesis is manufactured by electrospinning, or by any useful method, and cerium nanoparticles are deposited in and/or on the prosthesis either during or after manufacture.
In one aspect, the therapeutic agent is a member of the interactome of the sulfated or sulfamated polymer that optionally directly binds to, or is a ligand of, the sulfated or sulfamated polymer. By “interactome” (e.g., interaction network) it is meant proteins that interact, however transiently, with a specified composition, and includes both specific and non-specific binding of the therapeutic agent to the sulfated or sulfamated polymer. In one aspect, the member of the specified interactome binds to, and optionally directly binds to the specified composition, e.g. sulfated or sulfamated polymer, and therefore can be characterized as a ligand of the specified composition. The interactomes of various sulfated or sulfamated polymers or oligomers are described in the art. For example, the glycosaminoglycan-protein interaction network is described in Gesslbauer, B., et al. (Exploring the Glycosaminoglycan-Protein Interaction Network by Glycan-Mediated Pull-Down Proteomics, Electrophoresis 2016 June; 37(11):1437-47). Ori, A, et al. (A Systems Biology Approach for the Investigation of the Heparin/Heparan Sulfate Interactome, J. Biol. Chem. Jun. 3, 2011; 286(22):19892-19904) describe the heparin/heparan sulfate interactome. For example, On, A, et al. describes 442 members of the heparin/heparan sulfate interactome, including, for example and without limitation, the following and cleavage products, recombinant versions, mutated versions, and/or post-translationally modified versions analogs or derivatives thereof that non-covalently bind heparin/heparan sulfate:
4F2 cell-surface antigen heavy chain; 5′-nucleotidase; Alpha-1-antitrypsin; Alpha-1B-glycoprotein; Alpha-2-macroglobulin; Amyloid beta A4 protein; Soluble APP-alpha; Soluble APP-beta; C99; Beta-amyloid protein 42; Beta-amyloid protein 40; C83; P3(42); P3(40); C80; Gamma-secretase C-terminal fragment 59; Gamma-secretase C-terminal fragment 57; Gamma-secretase C-terminal fragment 50; C31; Alpha-1-antichymotrypsin; Angio-associated migratory cell protein; Bile salt export pump; ATP-binding cassette sub-family G member 2; ATP-binding cassette sub-family G member 5; Amiloride-sensitive amine oxidase; Alpha-1B adrenergic receptor; Agouti-related protein; Aminoacyl tRNA synthase complex-interacting multifunctional protein 1; Aldose reductase; Protein AMBP; Inter-alpha-trypsin inhibitor light chain; Trypstatin; Alpha-2-macroglobulin receptor-associated protein; Angiogenin; Angiotensinogen; Angiotensin-2; Angiotensin-3; Antithrombin-III; Annexin A1; Annexin A2; Annexin A3; Annexin A5; Annexin A6; Amyloid-like protein 1; Amyloid-like protein 2; Apolipoprotein A-V; Apolipoprotein B-100; Apolipoprotein E; Beta-2-glycoprotein 1; Aquaporin-1; Arginase-1; Artemin; Agouti-signaling protein; Sodium/potassium-transporting ATPase subunit alpha-1; Sodium/potassium-transporting ATPase subunit beta-1; Sodium/potassium-transporting ATPase subunit beta-3; Plasma membrane calcium-transporting ATPase 1; Copper-transporting ATPase 2; ATP synthase subunit alpha mitochondrial; Attractin; A disintegrin and metalloproteinase with thrombospondin motifs 1; A disintegrin and metalloproteinase with thrombospondin motifs 3; A disintegrin and metalloproteinase with thrombospondin motifs 5; A disintegrin and metalloproteinase with thrombospondin motifs 8; A disintegrin and metalloproteinase with thrombospondin motifs 9; Beta-2-microglobulin; Band 3 anion transport protein; cDNA FLJ57339; Beta-secretase 1; Bone morphogenetic protein 2; Bone morphogenetic protein 3; Bone morphogenetic protein 4; Bone morphogenetic protein 7; Probetacellulin; Complement C1q subcomponent subunit A; Complement C1q subcomponent subunit B; Complement C1q subcomponent subunit C; C4b-binding protein alpha chain; Voltage-dependent L-type calcium channel subunit alpha-IS; Cadherin-8; Azurocidin; Cathepsin B; Cathepsin B heavy chain]; Cathepsin G; Corticosteroid-binding globulin; Carboxypeptidase B2; Carboxypeptidase D; Coiled-coil domain-containing protein 134; Coiled-coil domain-containing protein 80; C-C motif chemokine 1; Eotaxin; C-C motif chemokine 13; C-C motif chemokine 13 medium chain; C-C motif chemokine 13 short chain; C-C motif chemokine 15; CCL15(25-92); CCL15(29-92); C-C motif chemokine 17; C-C motif chemokine 19; C-C motif chemokine 2; C-C motif chemokine 21; C-C motif chemokine 22; MDC(5-69); MDC(7-69)]; C-C motif chemokine 23; CCL23(22-99); CCL23(27-99); CCL23(30-99)]; C-C motif chemokine 24; C-C motif chemokine 25; C-C motif chemokine 27; C-C motif chemokine 28; C-C motif chemokine 3; C-C motif chemokine 4; C-C motif chemokine 5; RANTES; C-C motif chemokine 7; C-C motif chemokine 8; Fibronectin type-III domain-containing protein C4orf31; Antigen-presenting glycoprotein CD1d; Platelet glycoprotein 4; Leukocyte surface antigen CD47; Bile salt-activated lipase; Ceruloplasmin; Uncharacterized protein C6orf15; Complement factor B; Complement factor B Bb fragment; Complement factor D; Complement factor H; Complement factor I; Complement factor I light chain; Chordin; UPF0765 protein C10orf58; Clusterin; Clusterin alpha chain; Chymase; Collagen alpha-1; Collagen alpha-2(I) chain; Complement C2; Complement C2a fragment; Collagen alpha-1(II) chain; Complement C3; Complement C3 alpha chain; C3a anaphylatoxin; Complement C3b alpha′ chain; Complement C3c alpha′ chain fragment 1; Complement C3dg fragment; Complement C3g fragment; Complement C3d fragment; Complement C3f fragment; Complement C3c alpha′ chain fragment 2; Collagen alpha-1(III) chain; Complement C4-A; Complement C4-A alpha chain; C4a anaphylatoxin; C4b-A; C4d-A; Complement C4 gamma chain]; Collagen alpha-1(IV) chain; Collagen alpha-2(IV) chain; Complement C5; Complement C5 alpha chain; C5a anaphylatoxin; Complement C5 alpha′ chain; Collagen alpha-1(V) chain; Collagen alpha-3(V) chain; Complement component C6; Collagen alpha-3(VI) chain; Complement component C7; Complement component C8 alpha chain; Complement component C8 beta chain; Complement component C8 gamma chain; Complement component C9; Complement component C9b; Collagen alpha-1(IX) chain; Collagen alpha-1(XI) chain; Collagen alpha-2(XI) chain; Collagen alpha-1(XII) chain; Collagen alpha-1(XIII) chain; Collagen alpha-1(XIV) chain; Collagen alpha-1(XVIII) chain; Collagen alpha-1(XIX) chain; Acetylcholinesterase collagenic tail peptide; Cartilage oligomeric matrix protein; Catechol O-methyltransferase; Collagen alpha-1(XXIII) chain; Collagen alpha-1(XXV) chain; Calcium release-activated calcium channel protein 1; Cysteine-rich secretory protein LCCL domain-containing 2; Granulocyte-macrophage colony-stimulating factor; Connective tissue growth factor; Low affinity cationic amino acid transporter 2; Gap junction beta-1 protein; C-X-C motif chemokine 2; C-X-C motif chemokine 6; Small-inducible cytokine B6 N-processed variant 2; Small-inducible cytokine B6 N-processed variant 3]; Platelet basic protein; TC-2; Connective tissue-activating peptide III; Beta-thromboglobulin; Neutrophil-activating peptide 2(74); Neutrophil-activating peptide 2(73); Neutrophil-activating peptide 2; TC-1; Neutrophil-activating peptide 2(1-66); Neutrophil-activating peptide 2(1-63); C-X-C motif chemokine 10; C-X-C motif chemokine 11; C-X-C motif chemokine 13; Cytochrome c; Protein CYR61; Netrin receptor DCC; Estradiol 17-beta-dehydrogenase 11; Estradiol 17-beta-dehydrogenase 12; 17-beta-hydroxysteroid dehydrogenase 13; 3-keto-steroid reductase; Dipeptidyl peptidase 4; Dipeptidyl peptidase 4 soluble form; Endothelin-converting enzyme 1; Extracellular matrix protein 2; Ephrin-A1; Ephrin-A3; Ephrin-A5; Elastin; Neutrophil elastase; Alpha-enolase; Ectonucleotide pyrophosphatase/phosphodiesterase family member 1; Nucleotide pyrophosphatase (NPPase); Ectonucleotide pyrophosphatase/phosphodiesterase family member 3; Nucleotide pyrophosphatase; Receptor tyrosine-protein kinase erbB-2; Coagulation factor X; Factor X heavy chain; Activated factor Xa heavy chain; Coagulation factor XI; Coagulation factor XIa light chain; Coagulation factor XII; Beta-factor XIIa part 1; Beta-factor XIIa part 2; Coagulation factor XIIa light chain]; Protein FAM55A; Coagulation factor IX; Coagulation factor IXa heavy chain; Fibulin-7; Fibrillin-1; Fibrillin-2; Fibrosin-1; IgG receptor FcRn large subunit p51; Fetuin-B; Heparin-binding growth factor 1; Fibroblast growth factor 10; Fibroblast growth factor 12; Fibroblast growth factor 14; Fibroblast growth factor 16; Fibroblast growth factor 17); Fibroblast growth factor 18; Heparin-binding growth factor 2; Fibroblast growth factor 20; Fibroblast growth factor 22; Fibroblast growth factor 3; Fibroblast growth factor 4; Fibroblast growth factor 5; Fibroblast growth factor 6; Keratinocyte growth factor; Fibroblast growth factor 8; Glia-activating factor; Fibroblast growth factor-binding protein 1; Fibroblast growth factor-binding protein 3; Basic fibroblast growth factor receptor 1; Fibroblast growth factor receptor 2; Fibroblast growth factor receptor 3; Fibroblast growth factor receptor 4; Fibrinogen alpha chain; Fibrinogen beta chain; Fibrinogen gamma chain; Fibronectin; UgI-Y1; UgI-Y2; UgI-Y3]; Follistatin; Follistatin-related protein 1; Furin; Protein G6b; Glia-derived nexin; Glial cell line-derived neurotrophic factor; Gelsolin; Growth hormone receptor G-protein coupled receptor 182; Transmembrane glycoprotein NMB; Growth-regulated alpha protein; GRO-alpha(5-73); GRO-alpha(6-73); Solute carrier family 2; facilitated glucose transporter member 2; Proheparin-binding EGF-like growth factor; Hepatoma-derived growth factor; Heparin cofactor 2; Hereditary hemochromatosis protein; Hepatocyte growth factor; Hepatocyte growth factor beta chain; High mobility group protein B1; Haptoglobin; Haptoglobin beta chain; Histidine-rich glycoprotein; Islet amyloid polypeptide; Insulin-like growth factor-binding protein 2; Insulin-like growth factor-binding protein 3; Insulin-like growth factor-binding protein 4; Insulin-like growth factor-binding protein 5; Insulin-like growth factor-binding protein 6; Plasma protease C1 inhibitor; Interferon gamma; Indian hedgehog proteinlndian hedgehog protein C-product; Interferon-inducible GTPase 5; Interleukin-10; Interleukin-12 subunit beta; Interleukin-2; Interleukin-3; Interleukin-4; Interleukin-5; Interleukin-6; Interleukin-7; Interleukin-8; Interleukin-8; IL-8(5-77); IL-8(6-77); IL-8(7-77); IL-8(8-77); IL-8(9-77); Interphotoreceptor matrix proteoglycan 2; Inhibin beta A chain; Insulin receptor, Insulin receptor subunit beta; Plasma serine protease inhibitor; Integrin alpha-1; Integrin alpha-5; Integrin alpha-5 light chain; Integrin alpha-M; Integrin alpha-V; Integrin alpha-V light chain; Integrin beta-1; Integrin beta-3; Inter-alpha-trypsin inhibitor heavy chain H3; Integral membrane protein 2B; Anosmin-1; Putative keratinocyte growth factor-like protein 1; Putative keratinocyte growth factor-like protein 2; Kininogen-1; T-kinin; Bradykinin; Lysyl-bradykinin; Kininogen-1 light chain; Low molecular weight growth-promoting factor]; Laminin subunit alpha-1; Laminin subunit alpha-2; Laminin subunit alpha-3; Laminin subunit alpha-4; Laminin subunit alpha-5; Laminin subunit gamma-2; Leucyl-cystinyl aminopeptidase; Low-density lipoprotein receptor, Galectin-9; Leucine-rich repeat-containing G-protein coupled receptor 4; Leukemia inhibitory factor receptor; Hepatic triacylglycerol lipase; Endothelial lipase; Lipoprotein lipase; Platelet-activating factor acetylhydrolase IB subunit alpha; Latrophilin-2; Latent-transforming growth factor beta-binding protein 1; L-selectin; P-selectin; Mannose-binding protein C; Multidrug resistance protein 1; Multidrug resistance protein 3; Hepatocyte growth factor receptor; Macrophage migration inhibitory factor Midkine; Matrix metalloproteinase-14; 72 kDa type IV collagenase; Matrilysin); Matrix metalloproteinase-9; 82 kDa matrix metalloproteinase-9; Monocarboxylate transporter 1; Monocarboxylate transporter 8; Multidrug resistance-associated protein 6; Myosin regulatory light polypeptide 9; Neuron navigator 2; Neural cell adhesion molecule 1; Netrin-1; Nicastrin; Noggin; Pro-neuregulin-1; membrane-bound isoform; Neuropilin-1; Neurturin; Sodium/bile acid cotransporter; Occiudin; Zinc finger protein OZF; Calcium-dependent phospholipase A2; Phospholipase A2; membrane associated; Plasminogen activator inhibitor 1; Plasminogen activator inhibitor 1 RNA-binding protein; Proton-coupled folate transporter; Procollagen C-endopeptidase enhancer 2; Proprotein convertase subtilisin/kexin type 5; Proprotein convertase subtilisin/kexin type 6; Programmed cell death protein 5; Platelet-derived growth factor subunit A; Platelet-derived growth factor subunit B; Protein disulfide-isomerase; Protein disulfide-isomerase A6; Phosphatidylethanolamine-binding protein 1; Platelet endothelial cell adhesion molecule; Pigment epithelium-derived factor; Myeloperoxidase; 84 kDa myeloperoxidase; Myeloperoxidase light chain; Myeloperoxidase heavy chain; Platelet factor 4 variant; Platelet factor 4 variant(5-74); Platelet factor 4 variant(6-74)]; Basement membrane-specific heparan sulfate proteoglycan core protein; LG3 peptide; Biglycan; Polymeric immunoglobulin receptor; Putative phospholipase B-like 1; Platelet factor 4; Placenta growth factor; Plasminogen; Activation peptide; Angiostatin; Plasmin heavy chain A short form; Plasmin light chain B; Serum paraoxonase/arylesterase 1; Serum paraoxonase/arylesterase 2; Serum paraoxonase/lactonase 3; Periostin; Peptidyl-prolyl cis-trans isomerase B; Peroxiredoxin-4; Prolargin; Bone marrow proteoglycan; Major prion protein; Prolactin; Vitamin K-dependent protein C; Vitamin K-dependent protein C heavy chain; Activation peptide; Properdin; Presenilin-1; Presenilin-1 CTF subunit; Presenilin-1 CTF12; Protein patched homolog 1; Pleiotrophin; Receptor-type tyrosine-protein phosphatase C; Stromal cell-derived factor 1 gamma; Liver-specific organic anion transporter 3TM13; SLCOIA2 protein; Mannan-binding protein; 60S ribosomal protein L22; 60S ribosomal protein L29; Roundabout homolog 1; R-spondin-1; R-spondin-2; R-spondin-3; R-spondin-4; 40S ribosomal protein SA; Solute carrier family 12 member 9; Sodium-dependent phosphate transporter 2; Solute carrier family 22 member 1; Solute carrier family 22 member 7; Solute carrier family 22 member 18; Sodium-coupled neutral amino acid transporter 3; Sodium-coupled neutral amino acid transporter 4; Zinc transporter ZIP4; Electrogenic sodium bicarbonate cotransporter 1; Serum amyloid A protein; Serum amyloid protein A(2-104); Serum amyloid protein A(3-104); Serum amyloid protein A(2-103); Serum amyloid protein A(2-102); Serum amyloid protein A(4-101)]; Serum amyloid P-component; Sodium channel protein type 5 subunit alpha; Stromal cell-derived factor 1; SDF-1-alpha(3-67)]; Semaphorin-5A; Semaphorin-5B; Secreted frizzled-related protein 1; Sonic hedgehog protein; Sonic hedgehog protein C-product; Beta-galactoside alpha-2,6-sialyltransferase 1; Slit homolog 1 protein; Slit homolog 2 protein; Antileukoproteinase; Synaptogyrin-1; Superoxide dismutase [Cu—Zn]; Extracellular superoxide dismutase [Cu—Zn]; Sortilin; Sderostin; Stabilin-2; EGF-like, laminin-type, EGF-like and link domain-containing scavenger receptor 2; Metalloreductase STEAP4; Stromal interaction molecule 1; Alpha-synuclein; Microtubule-associated protein tau; Teneurin-1; Tenascin; Tenascin-X; Tissue factor pathway inhibitor; Transferrin receptor protein 1, serum form; Transferrin receptor protein 2; Transforming growth factor beta receptor type 3; Transforming growth factor beta-1; Transforming growth factor beta-2; Protein-glutamine gamma-glutamyltransferase 2; Thioredoxin; Prothrombin; Thrombin light chain; Thrombin heavy chain; Thyroglobulin; Metalloproteinase inhibitor 3; T-cell immunomodulatory protein; Tumor necrosis factor ligand superfamily member 13; Tumor necrosis factor, Tumor necrosis factor soluble form; Tissue-type plasminogen activator Tissue-type plasminogen activator chain B; Tumor necrosis factor receptor superfamily member 11B; Serotransferrin; Lactotransferrin; Lactoferroxin-A; Lactoferroxin-B; Lactoferroxin-C; Trypsin-1; Tryptase alpha/beta-1; Tryptase beta-2; Tumor necrosis factor-inducible gene 6 protein; Thrombospondin-1; Thrombospondin-2; Thrombospondin-3; Thrombospondin-4; Transthyretin; Urokinase-type plasminogen activator; Vascular endothelial growth factor A; Vascular endothelial growth factor B; Vascular endothelial growth factor receptor 1; Vascular endothelial growth factor receptor 2; Vitamin D-binding protein (DBP) (VDB) (Gc-globulin) (Group-specific component); Vitronectin; von Willebrand factor Proto-oncogene Wnt-1; Fractalkine; Lymphotactin; Xanthine dehydrogenase/oxidase; Zinc transporter 1 (ZnT-1); and Protein Z-dependent protease inhibitor.
Pharmaceutically acceptable salts of any therapeutic agent bound to or otherwise combined with, or incorporated into the shear-thinning composition according to any aspect herein, may be employed. Pharmaceutically acceptable salts are, because their solubility in water is greater than that of the initial or basic compounds, particularly suitable for medical applications. These salts have a pharmaceutically acceptable anion or cation. Suitable pharmaceutically acceptable acid addition salts of the compounds of the invention include, without limitation, salts of inorganic acids such as hydrochloric acid, hydrobromic, phosphoric, metaphosphoric, nitric and sulfuric acid, and of organic acids such as, for example, acetic acid, benzenesulfonic, benzoic, citric, ethanesulfonic, fumaric, gluconic, glycolic, isethionic, lactic, lactobionic, maleic, malic, methanesulfonic, succinic, p-toluenesulfonic and tartaric acid. Suitable pharmaceutically acceptable basic salts include without limitation, ammonium salts, alkali metal salts (such as sodium and potassium salts), alkaline earth metal salts (such as magnesium and calcium salts), and salts of trometamol (2-amino-2-hydroxymethyl-1,3-propanediol), diethanolamine, lysine or ethylenediamine. Pharmaceutically acceptable salts may be prepared from parent compounds by any useful method, as are well known in the chemistry and pharmaceutical arts. It should be noted that for inorganic salts, the content to be loaded in this hydrogel may be limited, because addition of salts will promote gelation of the silicate platelets. As such, in certain instances, salt forms may not be used, or counterions should be removed, for example by ion exchange, prior to mixing the therapeutic agent or therapeutic agent plus sulfated or sulfamated polymer with the silicate platelets. However, some salt content, for example as shown in
As used herein, the terms “drug” and “drugs” refer to any compositions having a preventative or therapeutic effect, including and without limitation, antibiotics, peptides, hormones, organic molecules, vitamins, supplements, factors, proteins and chemoattractants. A “therapeutic agent” (e.g. FGF-2, below) is the pharmacologically-active constituent of a drug product (e.g., the shear thinning composition below comprising LAPONITE®, heparin, and FGF-2, also referred to herein as a therapeutic composition).
According to one aspect of the invention, a method of making a shear-thinning therapeutic composition (a drug product) is provided. The method comprises mixing a sulfated or sulfamated polymer with a therapeutic agent that is a binding partner of the sulfated polymers or oligomers to produce a complex of the sulfated or sulfamated polymer and the therapeutic agent; and mixing the complex of the sulfated or sulfamated polymer and the therapeutic agent with natural or synthetic silicate platelets to produce a shear-thinning hydrogel. According to additional aspects, one or more additional, different, therapeutic agent(s) are combined with the sulfated or sulfamated polymers or oligomers and/or the natural or synthetic silicate platelets prior to or during any mixing step to produce a combined dosage form. Alternatively, the therapeutic agent is first mixed with the silicate platelets and then with the sulfated or sulfamated polymer. In yet another aspect, the therapeutic agent is mixed with the silicate platelets and with the sulfated or sulfamated polymer at the same time.
In use, the shear-thinning composition according to any aspect described herein is administered to a patient. For example, the composition is administered parenterally, e.g. subcutaneously or intramuscularly. In one aspect, the composition is placed into or is distributed in a medical syringe. During delivery, a force is applied, resulting in a loss of viscosity of the composition, and the composition is passed through a needle, cannula, catheter, or any useful tube for delivery of the composition at a site for delivery in a patient, for example and without limitation, within a wound, abdomen or peritoneal cavity of a patient. Small globules of the composition can be placed at any suitable site of the patient, or within a tissue engineering scaffold. In one aspect, the composition is injected or otherwise implanted at a site of a wound or tissue defect in the patient, wherein the composition is used as a soft tissue filler, which can find use in plastic surgery and reconstructive surgery, for example in the case of maxillofacial injury or defect repair, or in breast reconstructive surgery.
In a further aspect, a commercial kit is provided comprising a composition described herein. A kit comprises suitable packaging material and the shear-thinning composition according to any aspect described herein. In one non-limiting aspect, the kit comprises a therapeutic shear-thinning composition according to any aspect described herein in a vessel, which is the packaging, or which is contained within packaging. In various aspects, the vessel is a vial, a medical syringe, tube or any other container suitable for storage and transfer in commercial distribution routes of the kit.
A versatile hydrogel for tissue regeneration that preserves the bioactivity of growth factors is tested. The shear-thinning gel self-assembles within one minute from heparin and LAPONITE®. By not covalently modifying heparin, it retains its natural affinity towards many proteins anchored in the extracellular matrix. In principle, Heparin-LAPONITE® gel can bind any heparin-binding compound or composition, e.g., a growth factor. Fibroblast growth factor-2 (FGF2) is used as proof-of-concept. Heparin in the gel protects FGF2 from proteolytic degradation and allows it to be released over time with preserved bioactivity. FGF2 released from subcutaneously injected gel and induces strong angiogenesis in a mouse model. The hydrogel degrades completely in vivo in 8 weeks with or without growth factors, eliciting mild inflammatory response but having little impact on the surrounding tissue. The ease of preparation and scale-up makes this protein delivery platform attractive for clinical translation.
Preparation of Heparin-LAPONITE® Hydrogel (Heparin-LAPONITE®):
LAPONITE® XLG and heparin sodium salt were donated by BYK Additives Inc. (Texas, USA) and Scientific Protein Laboratories, LLC (Waunakee, USA) respectively. All LAPONITE® dispersions were prepared by dispersing LAPONITE® powder in deionized water with vigorously magnetic stirring for 2 h before use. Concentration of heparin solutions ranged from 40 to 400 mg/mL and were prepared by dissolving heparin sodium salt in deionized water. When preparing Heparin-LAPONITE® gels, 0.1 mL of heparin solution was quickly added to 2.0 mL of LAPONITE® dispersion and immediately manually swirled for one minute to yield Heparin-LAPONITE® gel. In this way, 0.1 mL of 40 to 400 mg/mL heparin solutions were separately mixed with 2.0 mL of 20 mg/mL LAPONITE® to yield heparin-LAPONITE® gels comprised of heparin and LAPONITE® with concentrations ranged from 1.9+19 to 19+19 mg/mL, respectively. The weight ratio of heparin to LAPONITE® (H/L) of the as-made Heparin-LAPONITE® gels was ranged from 1:10 to 10:10.
To prepare Heparin-LAPONITE® gels at different solid concentrations with H/L ratio fixed at 4:10, 40 mg of LAPONITE® powder was dispersed in certain volumes of deionized water to obtain LAPONITE® dispersions with concentrations ranged from 15 to 30 mg/mL, respectively. Then each dispersion was mixed with 0.1 mL of 160 mg/mL heparin solution to yield Heparin-LAPONITE® gels with solid concentrations (heparin+LAPONITE®) ranged from 5.8+14.4 to 11.2+28.0 mg/mL. All heparin-LAPONITE® gels were prepared and immediately used for rheological tests.
To prepare heparin-LAPONITE® gels containing different content of NaCl with H/L ratio fixed at 4:10, 0.1 mL of heparin solutions containing NaCl ranged from 2.1 to 18.9 wt. % were dropwisely added to 2.0 mL of 20 mg/mL LAPONITE® dispersion while maintaining manually swirling during addition. The mixtures were immediately transferred for rheological tests. In this way, the Heparin-LAPONITE® gels containing 0.1 to 0.9 wt. % NaCl were prepared to examine the effects of salt ions on the gelation kinetics and gel properties.
Rheological Study:
Dynamic rheological measurements were performed on AR2000ex (TA Instruments, USA). The as-made Heparin-LAPONITE® gels with different H/L ratio or solid concentrations were immediately transferred to a parallel plate (40 mm diameter, gap distance 750 μm) for rheometry test. To prevent evaporation of solvent, a thin layer of mineral oil was applied to the sample edge during test. Oscillatory time sweep measurement was performed to record the gelation behavior versus time at 37° C. under a controlled strain of 1% and a frequency of 1 rad s−1. To investigate viscoelastic properties, angular frequency sweep measurement was conducted to record both storage (G′) and loss (G″) moduli with angular frequency setup from 0.1 to 100 rad s−1 and a strain at 1%. Furthermore, a steady shear rate sweep was performed to investigate the shear thinning behavior of the hydrogels as a function of shear rate from 0.01 to 10 s−1. Each sample was replicated at least three times.
Zeta Potential Test:
Zeta potential measurements were performed using zetasizer (Nano-ZS90, Malvern). The LAPONITE® dispersion was diluted to 10 mg/mL and heparin solutions were prepared with concentrations ranging from 20 to 160 mg/mL for use. Then 0.1 mL of 20 to 160 mg/mL heparin solutions was separately mixed with 2.0 mL of 10 mg/mL LAPONITE® dispersion to yield a series of Heparin-LAPONITE® complex suspensions. These Heparin-LAPONITE® complex suspensions were comprised of heparin and LAPONITE® with concentrations between 0.95+9.5 to 7.6+9.5 mg/mL (H/L, 1:10 to 8:10). The Heparin-LAPONITE® complexes were prepared under this condition to avoid gelation, so that the mobility of the conductive components would not be hindered for zeta potential measurements. The H/L ratio of the Heparin-LAPONITE® complexes was remained same to the Heparin-LAPONITE® gels. A LAPONITE® dispersion at 9.5 mg/mL and a series of heparin solutions with concentrations between 0.95 to 7.6 mg/mL were also prepared for comparison. The freshly made Heparin-LAPONITE® complex suspensions, LAPONITE® dispersion and heparin solutions were immediately transferred into a cuvette for zeta potential measurements. At least three readings of each measurement were recorded to calculate the mean value and its standard deviation.
Controlled Release Study:
For in vitro and in vivo studies, all LAPONITE® dispersion and heparin in deionized water solutions were sterilized by filtering through 0.2 μm syringe filter before use. 500 ng FGF2 was loaded in Heparin-LAPONITE® gels with different heparin to LAPONITE® ratio (H/L) for controlled release study. Specifically, 2 μL of 250 ng/μL FGF2 solution was separately mixed with 25 μL of 80, 160 and 320 mg/mL heparin solutions to yield three heparin-FGF2 complexes. The three heparin-FGF2 complexes were then separately added to 500 μL of 20 mg/mL LAPONITE® dispersion in each Eppendorf tube and manually swirled for 1 min to yield three 500 ng FGF2-loaded Heparin-LAPONITE® gels. The three Heparin-LAPONITE® gels were comprised of heparin and LAPONITE® with concentrations of 3.8+19, 7.6+19 and 15.2+19 mg/mL (H/L ratio, 1:5, 2:5 and 4:5) to examine the H/L ratio effects on the FGF2 release kinetics. The FGF2-loaded Heparin-LAPONITE® gels were centrifuged at 5000 rpm for 15 second to remove air bubbles and then 200 μL of 0.9% NaCl saline solution was added to the gel top. The controlled release was set up at 37° C. in an incubator for 34 days. At each scheduled time point, the gel tubes were centrifuged at 5000 rpm for 15 second and the supernatant was collected using pipette, and then 200 μL of fresh saline was added for next time point. Such procedure was repeated until the controlled release experiment was completed. The controlled release was replicated three times.
500 ng FGF2 was directly loaded in two LAPONITE® gels with concentration at 22.8 and 26.6 as controls to compare the release behavior from Heparin-LAPONITE® gels. 2 μL of 250 ng/μL FGF2 solution was mixed with 25 μL deionized water and then respectively added to 500 μL of 24 and 28 mg/mL LAPONITE® dispersions and manually swirled for 1 min. The FGF2-loaded LAPONITE® dispersions were incubated at 37° C. for about 2 h to yield two LAPONITE® gels containing 500 ng FGF2 in each gel. All other procedure is same with FGF2-loaded Heparin-LAPONITE® gels for controlled release study. The concentrations of all the released FGF2 samples were determined using ELISA assay kit according to the manufacturer's instruction (PEPROTECH, NJ, USA).
Western Blot Assay:
To insure enough amount of the released FGF2 for Western blot test, 5 μg FGF2 was loaded in Heparin-LAPONITE®, hyaluronic acid-LAPONITE® (HA-LAPONITE®) gels and LAPONITE® control, respectively. Specifically, 5 μL of 1 μg/μL FGF2 was mixed with 25 μL of 160 mg/mL heparin solution and then added to 500 μL of 20 mg/mL LAPONITE® dispersion with manually swirling for 1 min to yield 5 μg FGF2-loaded Heparin-LAPONITE®gel. Same amount of free FGF2 solution was diluted with 25 μL of deionized water and then directly mixed with 500 μL of 20 mg/mL LAPONITE® dispersion to yield 5 μg FGF2-loaded LAPONITE® gel as a control.
HA-LAPONITE® gel was also prepared using a reported protocol (Divya Bhatnagar D X, Dilip Gersappe, and Miriam H. Rafailovich. Hyaluronic Acid and Gelatin Clay Composite. Journal of Chemical and Biological Interfaces. 2014; 2:1-11) for controlled release of FGF2 to compare with our Heparin-LAPONITE® gel. 5 μL of 1 μg/μL FGF2 solution was mixed with 100 μL of 5 mg/mL hyaluronic acid and then added to 500 μL of 30 mg/mL LAPONITE® dispersion with manually swirling for 1 min to yield 5 μg FGF2-loaded HA-LAPONITE® gel.
All FGF2-loaded hydrogels were centrifuged at 5000 rpm for 15 second to remove any air bubbles and 500 μL fresh saline solution was added to each gel top. The controlled release was set up at 37° C. in an incubator for 134 h. The gel tubes were centrifuged at 5000 rpm for 15 second and the supernatants were collected. The concentrations of the released FGF2 were determined by ELISA assay to be 490 ng/mL for Heparin-LAPONITE® gel, and ca. 9.0 and 9.6 ng/mL for both LAPONITE® control and HA-LAPONITE® gel.
According to the released FGF2 concentration, free FGF2 solution at 490 ng/mL and heparin-FGF2 complex solution at 3.9 mg/mL+490 ng/mL were prepared as controls. Then 100 μL of the released FGF2 solution, free FGF2 and heparin-FGF2 complex were separately mixed with 9.8 μg trypsin (FGF2:trypsin=1:200 by wt.) and incubated at 37° C. for 0.5 and 2 h, respectively. The digested solutions were immediately mixed with 100 μL of tricine sample buffer (Bio-Rad Laboratories, CA, USA) and denatured at 100° C. for 5 min. Similarly, FGF2 solutions released from LAPONITE® and HA-LAPONITE® gels were similarly treated with trypsin and denatured with the tricine sample buffer using same procedure.
Western blotting was used to examine the amount of intact FGF2. SDS-PAGE was utilized for separation followed by protein blotting on a PVDF membrane (Bio-Rad Laboratories, Hercules, Calif.). The membrane was blocked with 5% BSA in TBS with 0.05% Tween 20 for 1 h, then incubated with a rabbit anti-human FGF2 polyclonal antibody (1:1,000, Abcam, Cambridge, Mass.). The membranes were washed with TBS 3 times and incubated with a peroxidase conjugated anti-rabbit IgG antibody for 2 h at room temperature. Signals were visualized using the ChemiDic™ XRS+Imaging System (Bio-Rad Laboratories, Hercules, Calif.), and band densities were quantified using NIH ImageJ software.
In Vivo Biocompatibility and Biodegradation:
Male BALB/cJ mice (Jackson Laboratory) with an average age of 8-9 wk were used and cared for in compliance with a protocol approved by the Institutional Animal Care and Use Committee of the University of Pittsburgh. Under isoflurane anesthesia, 100 μL of Heparin-LAPONITE® gel (7.6+19 mg/mL) or LAPONITE® gel (19 mg/mL) was injected in the left back of the mice through a 31G insulin needle. The right back, which did not receive injection, served as the contralateral control. All groups contained four to eight mice. The animals were sacrificed at post-injection day 3, weeks 2, 4, 6 and 8. The subcutaneous tissues were harvested at the injection site and the contralateral site. Tissues were fixed in 10% formalin for 15 min, and then soaked in 30% sucrose and embedded in the Tissue-Tek optimum cutting temperature (O.C.T) compound (Sakura Finetek USA). Cross sections (6-μm thick, longitudinal axial cut) were stained with hematoxylin and eosin (H & E), and Masson's trichrome stain (MTS) and ED-1 to examine inflammation or any adverse effects. For ED-1 immunohistochemical analysis, 6-μm thick sections of the tissues were dried and fixed in histology-grade absolute ethanol for 15 min, air dried, and incubated with rat monoclonal anti-CD68 (1:200, Abcam, Cambridge, Mass.) for ED-1 identification. The slides were then incubated with a goat anti-rat-Alexa 594 (1:400, Life technologies, Carlsbad, Calif.) for 1 hour. ED-1 stained sections were analyzed for the density of newly recruited macrophages. Five to ten 200× magnification images were obtained for each specimen. The image was taken using an inverted microscope Eclipse Ti (Nikon, Melville, N.Y.) equipped with a digital camera (QImaging, BC, Canada).
Angiogenesis Study:
100 μL of Heparin-LAPONITE® gel with or without loading growth factor FGF2 (500 ng) (Peprotech, Rocky Hill, N.J.) was injected in the left back of the mice through a 31G insulin needle. The subcutaneous tissues were harvested on day 3, weeks 2 and 4 post-injection and embedded and frozen in Tissue-Tek OCT compound. Sections of 6-μm thickness were prepared with a cryomicrotome. The following antibodies were applied per supplier instructions: rat anti-mouse CD31 monoclonal antibody (BD Biosciences), a goat anti-rat-Alexa 594, FITC-conjugated anti-α-SMA monoclonal antibody (Sigma). All slides were counterstained with DAPI (Invitrogen). The fluorescent images were taken by a Nikon inverted microscope Eclipse Ti. Six low magnification (100×) fields containing the highest number of CD31− or α-SMA-positive cells were randomly selected for each group. The number of blood vessels in the field was counted and confirmed by DAPI-positive nuclei. The value was divided by the area of the imaged tissue to obtain blood vessel number per unit area and a mean value was calculated based on the six images per group.
Statistical Analysis:
The data of macrophage number and blood vessel number per square millimeter were analyzed using one-way ANOVA statistical analysis with post-hoc Bonferroni correction. A p value <0.05 is considered significant. Data represent mean±standard deviation (SD).
Rapid Gelation Between Heparin and LAPONITE®:
Heparin-LAPONITE® gel is designed for protein delivery by mixing heparin-protein complex solution with LAPONITE® dispersion and manually swirled to gel within one minute (
The LAPONITE® nanoplatelet carries approximately 1000 negative charges per particle and the particle edge is positively charged which counters approximately 10% of the total negative charges, the rest of the negative charges are balanced by metal ions. The heparin used here has number average molecular weight of ˜20 kDa and each chain bears approximately 117 negative charges, though it is believed that a large molecular weight range for heparin or heparan sulfate would be useful (
It is expected that the gelation rate is proportional to LAPONITE® concentration because the spaces between the particles are reduced at higher concentration and thus the anchored heparins can more effectively reach the adjacent particles to form crosslinks. This is consistent with oscillatory rheological measurements of Heparin-LAPONITE® gels as a function of the concentration with the H/L ratio fixed at 2:5 (
LAPONITE® dispersion at 20 mg/mL is stable for at least 6 months and only forms weak “house-of-cards” gel after mature gelation (
The heparin was dissolved in NaCl solution and then added dropwise to LAPONITE® dispersion to yield heparin-LAPONITE® gels (7.6+19 mg/mL) containing 0.1 to 0.9 wt. % NaCl. The oscillatory time sweep measurements show that the presence of suitable amount of salt ions promoted the gelation process, instead of inhibiting or retarding gelation (
Zeta Potential to Examine the Electrostatic Interactions:
We believe that electrostatic interactions crosslink heparin and LAPONITE®, thus zeta potential was used to examine the change of charge upon mixing the two components (
Controlled Release of Protein and Protection from Proteolytic Degradation:
Most free growth factors degrade quickly in vivo by proteolytic cleavage, leading to low therapeutic efficacy. The advantages of the heparin-LAPONITE® delivery platform are the protection against proteolysis and sustained release of the proteins in an active form. This is demonstrated using FGF2 as a model biomolecule to investigate its release kinetics and stability with regard to proteolytic degradation (
The FGF2 is loaded in heparin-LAPONITE® gels with H/L ratios of 1:5, 2:5 and 4:5. The H/L ratio is varied to compare the effects on its release kinetics. Same amount of free FGF2 is directly loaded in LAPONITE® gels with concentrations at 22.8 and 26.6 mg/mL as controls. The release profiles show that the cumulative release is elevated from 25.3±4.7% to 105±11% over 34 days when the H/L ratio increases from 1:5 to 2:5, but is reduced to 22.6±0.2% again when the H/L ratio is further increased to 4:5. However, both LAPONITE® controls show negligible FGF2 release (0.8±0.2 and 1.3±0.3%) over 34 days. Such release kinetics is mainly dependent on the binding between FGF2, heparin and LAPONITE®. In Heparin-LAPONITE® gels, FGF2 is complexed with heparin to form heparin-binding proteins and then incorporated in the gels (
The ability of heparin-LAPONITE® gel to protect FGF2 against proteolysis is examined by Western blot (
In Vive Biocompatibility Study:
Heparin-LAPONITE® gel with an H/L ratio at 2:5 (7.6+19 mg/mL) was selected as a representative for subcutaneous implantation study to investigate the host response. All animals survived throughout the study without any malignancy, infection or abscess observed at the injection sites. Tissues around the gel showed no adverse reactions such as necrosis, fibrosis and muscle degeneration (
To further investigate cell activities, CD68 and DAPI were used to detect macrophages distribution relative to the subcutaneous implants. CD68 is a pan-macrophage marker. By day 3 after injection, the tissue adjacent to the gel contained most inflammatory cells, as revealed by CD68 staining. This is attributed to a non-specific inflammatory response to the material, which has been widely observed in many implanted biomaterials. At week 2, there was a significant reduction in newly-recruited macrophages compared to day 3 (
FGF2-Loaded Heparin-LAPONITE® Gel Induces Strong Angiogenesis:
In order to examine the bioactivity of the proteins released from the gel, FGF2 was chosen as a model drug, and angiogenesis as a readout of FGF2 activity. Therapeutic angiogenesis is a potential treatment for many human diseases such as coronary and peripheral ischemia (Chu H, et al. Proc. Nat'l. Acad. Sci. U.S.A. 2011; 108:13444-9 and Gupta R, et al. Human studies of angiogenic gene therapy. Circ. Res. 2009; 105:724-36). The FGF2-loaded Heparin-LAPONITE® gel (Heparin-LAPONITE®-FGF2) and Heparin-LAPONITE® alone were subcutaneously injected in the back of BALB/cJ mice. The tissues surrounding the implantation site and the contralateral side without gel treatment were harvested at different time points to study the effects of the released FGF2 on angiogenesis. The mature blood vessel formation was confirmed by co-staining of CD31 (endothelial cell marker) and α-smooth cell actin (SMA, a mural cell marker). Compared to the heparin-LAPONITE® alone treated group and the contralateral control, the heparin-LAPONITE®-FGF2 gel-treated group generated more mature blood vessels with larger diameter (
The FGF2-loaded Heparin-LAPONITE® gel shows faster in vivo degradation than heparin-LAPONITE® alone because the cells are more quickly recruited into the gel (
In sum, a versatile injectable hydrogel was designed for bioactive protein delivery with stabilized molecular structure and preserved bioactivity for tissue regeneration. This gel is made from heparin solution and LAPONITE® dispersion by simply mixing the two components at appropriate ratio by manually swirling for one minute. FGF2 is used as an example for in vitro and in vivo studies to investigate its release kinetics, stability against proteolytic degradation and bioactivity for angiogenesis. This delivery system is versatile and is expected to be useful for protection and therapeutic delivery of many other proteins as well. More than 400 proteins and peptides bind with heparin.
This example illustrates the robust gelation ability between LAPONITE® and ionic amino acid molecules, cationic lysine and anionic glutamic acid. The easy gelation using various cationic, anionic and hydrophilic molecules with LAPONITE® is expected to expand the applications as versatile drug delivery vehicles because different cargos can choose different cationic, or anionic, or hydrophilic molecules to complex and incorporate into the gel for sustainable release.
Here, small biomolecules such as cationic and anionic amino acids are used to further examine the rapid gelation with LAPONITE® dispersion. Two types of amino acids are used as the representatives of small molecular gelators. One is cationic lysine (K) and the other is anionic glutamic acid (E). The K is readily dissolved in deionized water to form solutions with concentrations ranged from 20 to 100 mg/mL for use. E is less soluble in pure deionized water, so it requires using 0.13 M and 0.65 M NaOH solution to dissolve the amino acid to yield clear E solutions (20 and 100 mg/mL) for use.
0.1 mL of K or E solution was added to 2 mL of LAPONITE® dispersion (20 mg/mL) and manually swirled for couple of seconds to form LAPONITE®-K and LAPONITE®-E mixtures. The mixtures were immediately transferred to a parallel plate for oscillatory rheometry tests.
LAPONITE® was reported as carriers for delivery of amino acids (M. Ghadiri, et al. Layered silicate clay functionalized with amino acids: wound healing application, RSC Advances, 2014, 4, 35332), but these experiments revealed that these ionic molecules can be employed as efficient gelators (gelling agents) to gel with LAPONITE® via ionic interactions. In addition to lysine and glutamic acid, as the representatives of cationic and anionic molecules to demonstrate the quick gelation with LAPONITE®, other ionic amino acids such as arginine and aspartic acid, and hydrophilic amino acids, including glutamine, histidine, asparagine, serine, tyrosine, threonine and other water soluble amino acids; cationic oligopeptides such as the dimer, trimer, tetramer, pentamer and hexamer, etc. of the above mentioned cationic amino acids; anionic oligo-peptides and polypeptide of above mentioned anionic amino acids; and hydrophilic oligo-peptides and polypeptides of above mentioned hydrophilic amino acids. Above, heparin is shown as a representative of sulfated or sulfamated polymers to gel with LAPONITE®. Together, all these shear thinning hydrogels formed between ionic biomolecules and LAPONITE® can expand the versatility of this technique for drug delivery applications.
The following clauses illustrate various aspects of the invention:
While the present invention is described with reference to several distinct embodiments, those skilled in the art may make modifications and alterations without departing from the scope and spirit. Accordingly, the above detailed description is intended to be illustrative rather than restrictive.
This application claims the benefit of U.S. Provisional Patent Application No. 62/394,991 filed Sep. 15, 2016, which is incorporated herein by reference in its entirety.
Filing Document | Filing Date | Country | Kind |
---|---|---|---|
PCT/US2017/051791 | 9/15/2017 | WO | 00 |
Number | Date | Country | |
---|---|---|---|
62394991 | Sep 2016 | US |