Stanglmaier R., Ryan T. and Souder J., “HCCI Operation of a Dual-Fuel Natural Gas Engine for Improved Fuel Efficiency and Ultra-Low NOx Emissions at Low to Moderate Engine Loads”, 2001, SAE Paper 2001-01-1897. |
“Engine Smoothness”, 2000, www.fortunecity.com/silverstone/lancia/58/technical_school/engine/smoot. |
“Reciprotating Combustion Engine”, 2001, http://reciprotating.com/default.htm. |
“Homogeneous-Charge Compression Ignition Stratified Charge Compression Ignition Engine Laboratory”, 2000, http://www.ca.sandia.gov. |
“SVD—A Unique Engine Concept”, Feb. 2000, http://www.saab.com/home/GLOBAL/en/pressreleases.xml. |
“Dynamics of the Swash Plate Mechanism” 1984, Proceedings of the 19845 Inter Compressor Engineering Conference. |
“New Engine Excites Many in Auto Industry”, 1998, http://www.detnews.com/1998/autos/9805/20/052001.htm. |
Kawabata, Y., Nakagawa K. and Shoji, F., “Operating Characteristics of Natural Gas Fueled Homogeneous Charge Compression Ignition”, 1998, Annual Technical Report Digest. |
“Dyna-Cam Revolutionary Engine Design”, 2001, http://www.dynacam.com. |
Christensen, M., Johansson, B., and Einewall, P., “Homogeneous Charge Compression Ignition (HCCI) using isooctane, ethanol, and Natural Gas. A Comparison wiht Spark-Ignition Operation”, 1997, SAE Paper 972874. |
Hultqvist, A., Christensen, M., and Johansson, P., “A Study of the Homogeneous Charge Compression Ignition Combustion Process by Chemiluminescence Imaging”, 1999, SAE Paper 1999-01-3680. |
Gray A. and Ryan T., “Homogeneous Charge Compression Ignition (HCCI) of Diesel Fuel”, 1997, SAE Paper 971676. |
Ziph B. and Meijer R., “Variable Stroke Power Control for Stirling Engines”, 1981, SAE Paper 810088. |
Clucas D.M. and Raine J.K., “A New Wobble Drive with Particular Application in a Stirling Engine”, 1994, IMechE vol. 208. |
Kontarakis G., Collings N. and Ma T., “Demonstration of HCCI Using Single-Cylinder, Four-stroke SI Engine with Modified Valve Timing”, 2000 SAE 2000-01-2870. |
Pucher G., Gardener D., Bardon M. and Battista, V., “Alternative Combustion Systems for Piston Engines Involving Homogeneous Charge Compression Ignition Concepts—A Review of Studies Using Methanol, Gasoline, and Diesel Fuel”, 1996, http://www.bcresearch.com. |
Gill G.S. and Freudenstein F., “Minimization of Inertia-Induced Forces in Spherical Four-bar Mechanisms. Part 2: Wobble-Plate Engines”, 1983, ASME. |
Gill, G.S. and Freudenstein F., “Minimization of Inertis-Induced Forces in Spherical Four-bar Mechanisms. Part 1: The General Spherical Four-bar Linkage”, 1983, ASME vol. 105/471. |
Hardenberg H. and Buhl H., “The Mercedes-Benz Om 403 VA—A Standard Production, Compression-Ignition, Direct-Injection Multifuel Engine”, 1982, SAE Paper 820028. |
Hiroshi T. and Masaharu H., “Historical Review of the Wobbleplate and Scroll Type Compressors”, 1990, SAE Paper 901737. |
Li J., Chae J., Lee S. and Jeong J., “Modeling the Effects of Split Injection Scheme on Soot and NOx Emissions of Direct Injection Diesel Engines by a Phenomenological Combustion Model”, 1996, SAE Paper 962062. |
McLanahan J., “Barrel Aircraft Engines: Historical Anomaly or Stymied Innovation”, 1998, SAE Paper 985597. |
Olsson J., Erlandsson O. and Johansson B. “Experiments and Simulation of a Six-Cylinder Homogeneous Charge Compression Ignition (HCCI) Engine”, 2000, SAE Paper 2000-01-2867. |
“Erickson MCC FE-120”, 1001, www.ericksonmotors.com/fe-120.htm. |
Miyagawa K. and Kayukawa H., “Development of the Swash Plate-Type Continuously Variable Displacement Compressor”, 1998, SAE Paper 980290. |
Sadashivappa K., Singaperumal M. and Narayanasamy K., “On the Efficiency of the Axial Piston Motor Considering Piston Form Deviations”, 1995, Pergamon 0957-4158 (95) 00074-7. |
Edge K.A. and Darling j., “The Pumping Dynamics of Swash Plate Piston Pumps”, 1989, ASME vol. 111/307. |
Thieme L. and Allen D., “Testing of a Variable-Stroke Stirling Engine”, 1986, 21st Intersociety Energy Conversion Engineering Conference, Paper 869104. |
Thieme L., “Initial Testing of a Variable STroke Stirling Engine”, 1985, U.S. Dept. of Energy, NASA TM-86875. |
Au M., Girard J. and Hiltner J., “Homogeneous Charge Com;pression Ignition”, 2001 http://www.me.berkeley.edu/˜mctai/hcci.html. |
Christensen M., Hultqvist A. and Johansson B., “Demonstrating the Multi-Fuel Capability of a Homogeneous Charge Compression Ignition with Variable Compression Ratio”, 1999, SAE Paper 1999-01-3679. |
Christensen M. and Johansson B., “Influence of Mixture Quality on Homogeneous Charge Compression Ignition”, 1998, SAE Paper 982454. |
Christensen M., Johansson B., Amneus P., and Mauss F., “Supercharged Homogeneous Charge Compression Ignition (HCCI)”, 1998, SAE Paper 980787. |
Kraft M., Maigaard P. and Mauss F., “Homogeneous Charge Compression Ignition Engine: A Simulation Study on the Effects of Inhomogeneities”, 2000, ASME 2000 Spring Technical Conference. |
Kraft M., Maigaard P., Mauss F. and Christensen M., “Investigations of Combustion Emissions in a HCCI Engine Measurements and a New Computational Model 2000 28th International Symposium for Combustion”, 4E12. |
Maricq M., Munoz R., Yang J. and Anderson R., “Sooting Tendencies in an Air Forced Direct Injection Spark-Ignition (DISI) Engine”, 2001, SAE Paper 2001-01-0255. |
Manring N., “Slipper Tipping within an Axial-Piston Swash-Plate Type Hydrostatic Pump”, 1998, ASME FPST-vol. 5. |
Jinqu N., Fukai I. and Kurihara M., “The Development of a Fixed-displacement Single-sided Swash Plate a/c Compressor”, 2001, SAE Paper 2001-01-0971. |
Kaahaaina N., Simon A., Caton P. and Edwards C., “Use of Dynamic Valving to Achieve Residual-Affected Combustion”, 2000, SAE Paper 2001-01-0549. |
Stanglmaier R. and Robert C., “Homogeneous Charge Compression Ignition (HCCI): Benefits, Compromises, and Future Engine Applications”, 1999, SAE Paper 19999-01-3682. |
Thring R., “Homogeneous Charge Compression Ignition (HCCI) Engines”, 1989, SAE Paper 892068. |
Fiveland S., and Assanis D., “A Four-Stroke Homogeneous Charge Compression Ignition Engine Stimulation for Combustion and Performance Studies”, 2000, SAE Paper 2000-01-0332. |
Nishimura T., Umeda T., Tsuta T. and Fujiwara, M., “Dynamic Response Analysis of a Swash Plate Type Hydraulic Piston Pump”, 1995, ASME/JSME Pressure Vessels and Piping Conference PVP-vol. 300. |
Sheiretov T., Glabbeek W. and Cusano C., Simulative Friction and Wear Study of Retrofitted Swash Plate and Rolling Piston Compressors, 1995. |
Taya T., Kobayashi H., Kawaguchi M. and Inagaki M. “10PC20 Swash Plate Type Variable Displacement Compressor for Automobile Air Conditioners”, 1992, SAE Paper 920260. |
Ryan T. and Callahan T. “Homogeneous Charge Compression Ignition of Diesel Fuel”, 1996, SAE Paper 961160. |
Tsuta T., Iwamoto T. and Umeda T. “Combined Dynamic Response Analysis of a Piston-Slipper System and Libricants in Hydraulic Piston Pump”, 1999, ASME PVP vol. 396. |
Zhang X., Cho J., Nair S., Manring N., “Damping on the Swash Plate of an Axial-Piston Pump 2000”, 2000, American Control Conference. |
“New Saab and Citroen Technology at Geneva”, Automotive Engineering Online, SAE International, May 2000. |
Herling, D., Smith, M., Baskaran, S., and Kupe J., “Application of Non-Thermal Plasma Assisted Catalyst Technology for Diesel Emission Reduction”, 2000, SAE Paper 2000-01-3088. |
Law, D., Kemp, D., Allen, J., Kirkpatrick, G., and Copland, T., “Controlled Combustion in an IC-Engine with a Fully Variable Valve Train”, 2001, SAE Paper 2000-01-0251. |
“Advanced Engine Technologies' OX2 Engine Poised as Alternative for Future World Energy Needs”, Press Release, Thursday, Feb. 8, 4:34 p.m. Eastern Time (http://biz.yahoo.com/prnews/010208/ca_advance_4.html). |
“Advanced Engine Technologies Unveils New Web Site”, Press Release, Monday, Mar. 12, 12:00 p.m. Eastern Time (http://biz.yahoo.com/prnews/010312/lam013_2.html). |