STUDENT, TEACHER, ADMINISTRATIVE AND RESEARCH COORDINATING HELPER

Abstract
As a professional in the field of disability, I worked in different positions and presently working as special teacher. The present invention is related to the field of education, in my day to day life I had seen many things stopping us to move forward due to the lack of resources. Pretty soon our non-renewable resources are going to be shorten, due to that, the major field is going to be effected is non-other than education.
Description

Surely Students pay attention on global warming, but there has been no history when and how the pollution emerged into our lives. Just do a quick reflection on our daily technological lifestyle; you drive a car, commute, and use electricity for entertainment and communication in schools as well as in offices. While you traveling, you burn diesel, petrol, or gas, while you commuting you use electricity, to store your data, you use SSD drives, flash drives or DVD but finally you submit your report on a sheet of paper. The point is, at some stage in a manner we all creating discards. One and half a century back, whatever the wastage was produced by humans and animals was mostly decomposed, or it is not an environmental polluting substance. But now due to the increased reliance on technology, presently man using most of the resources available on the land and within hundred and fifty years we used almost all the resources (nonrenewable). Now it is time to stop what we doing and find safe methods to continue the life at the same speed.


Today there is lot of technology integration into the classroom, but anyway you have to use paper along with computer because there is no proper technology integration yet. It is time to replace something with paper in the classroom to reduce pollution as well as to bring the effective technology integration into the classroom. In fact without writing and reading practice, there is no other way to improve human memory in all the content areas. The more you speak (as well as different languages), do, and participate in activities along with reading and writing, the more of problem solving capacity you will get. However, this ability differs from person to person due to their experience and practice.


Having computer knowledge is an additional skill; it is not an alternate, or substitute for paper, pen and pencil. Your hand writing coordination by using pen and pencil with your intelligence is much higher than the coordination with any other technology or computer and keyboard. For instance, the tests scores of paper and computer are always differ, even though you give those same questions as well as the same number of questions. So always you get different time duration for paper based test and computer based test administration. Most of the famous writers still use paper and pen to express their thoughts, and later they bring into the computer. However you can also master the skill with computer key board but during this process you need to go through many skill correction processes like spelling, and grammar, if you're new to that particular language, definitely it will take some more extra time too.


Schools and Universities are tried to replace computer with paper, yet they are not succeeded, so now they are keeping computers in the labs away from classroom. Computer needs different skills to operate, in the classroom from elementary to university, if you have good typing skills you can take notes and use it effectively otherwise, by the time you type a word your teacher might completed a paragraph.


“We all definitely need computers but not in the classroom, they are just perfect in computer lab”. All the students must continue their reading and writing practice in all the contents up to Bachelors level, because up to that level neuropsychological development will not be completed. However, form masters level also you need to practice reading and writing but it depends on the individual's chosen profession.


To have computer in the classroom for every student it is very expensive, it needs funding, and other thing is, every two to three years software companies upgrade their software, due to that many online operated text material cannot be downloaded unless until you have a compatibility software in your system. Upgrading software and hardware is great deal in this economy for public schools and as well as to the universities.


Any way the point is computer technology is separate knowledge it is not enhancing the natural skills of reading and writing (it may help in certain conditions, for Example: accommodations and modifications for exceptional). If you go beyond the nature it happens just like that Today, most of the children in the world suffering with writing problems, either they can't write nor they can't type on the key board. This problem is not only with the children, it is up to PhD level without any discrimination.


When they get into the real jobs most of the newcomers, facing problems related to writing and typing while completing their projects. Because most of them take excess time to complete their assignments due to the lack of sufficient typing and writing skills.


Technology should enhance the natural processes, if you stop natural process it will cost you one day.


In order to contribute to solve some of the above mentioned problems, as well as an interventionist and educator, I continuing my personal research in various aspects of human life and technology, as a part of that, the present invention “Student, Teacher, Administrative and Research Coordinating Helper” (STARCH) is the one.


BRIEF DISCRETION OF EACH ITEM IN STARCH

The present invention is a combination of three different instruments used together in classrooms from Pre K-PhD. These instruments can solve (i) Security issues, (ii) technology integration issues, (iii) reduce the paper usage, (iv)as well as reduce the consumption of electricity used in the educational setting supplied from nonrenewable sources, by replacing the solar battery storage system. The main three inventions are: 1.Moveable Digital podium, 2.Dual tablet, and 3.solar panels mounting frame come ventilator.


1. Moveable Digital Podium:

The digital Podium can be used to teach, communicate, and record the class teaching or prepare content instruction audio video lessons and monitor the security (students outside the class, and any administrative instructions or information situation to the administrators) inside as well as outside the classroom.

    • (i) Pedal and chain wheel base (ii) height adjustable pole, (iii) multi tablet (iv) Podium Chair (v) security display.


Pedal and Chain Wheel Base:

Usually you just stand on the floor in front of any traditional podium, however, the present classroom teacher need to walk around the class and at the same time he/she need to teach, write on board as well as operate his/her computer. Presently most of the technology integrated classrooms has interactive boards and they can be operated with the help of wireless operated writing pad. But the big deal is discipline. Teacher must stop what he/she is doing, to respond to a student, or he need to pay all his attention to student. Once you start paying attention to a student the whole class will stop what they doing and just observe the seen. There are many issues happens around the class like; (i) one of your students out of the class and may be involved in a fight, (ii) other in restroom for more than assigned time, (iii) a visitor taken permission to observe your class, but gone else ware. Until unless the front office let you know what's happening in intercom or call you on the phone, other than that you may not know all these things. But once your class listens that in your class intercom or you on phone for some two minutes so, meanwhile you may have some distraction in the classroom. In order to deal all the above aspects one time can be possible if you move around in the classroom, continue teaching, interact with each individual student, observe your students who are out of the class, conform visitor pass after watching live video of a visitor face, provide differentiated instruction, provide modifications to those who have individual needs, and record your own teaching with your students responses or activities then you can deal discipline, and provide effective teaching. But all these can only possible if you move your computer along with the board interactive writing pad, as well as with two three cameras. But it is not possible in the classroom while teacher is walking, even though you arrange all the required things on a wheel table still it is heavy as well as you need more space. “Well it is not dream anymore”; if you stand on the base of the digital podium you can do all the above mentioned things while moving between the rows of your student chairs. The podium base will be available in two types one is puss pedal wheel and other one is chain based pedal wheel.


(a) Pedal Wheel Base:

This base supports the podium pole and it is movable when you press the pedals. These are four individual pedals are directly attached to the wheel rotating curve bar, front two pedals are used to move forward and back two wheels are used to move backwards. All the peals can be individually lacked when you don't want to move the podium.


(b) Chain Wheel Base:

The chain pedal also works just like pedal wheel podium but only the difference is the pedals are attached to the chain wheel and there are only two pedals.


Height Adjustable Pole:

Pole is connected to the multi-tablet frame and at the bottom it is mounted in the podium base, so according to the person's height you can adjust the height of the podium with the help of a key.


Multi Tablet Frame:

This frame works as a port for three different size tablets and one mini-projector as well as data storage, come broadcast system for dual tablets used by the students in the classroom. Further it also has inbuilt mice and dual cam arm with a supporting battery.


Podium Chair:

Chair can be used as any regular char with wheels in class room but in addition to a regular chair has a bag to store simple things like documents and any other class supplies. In addition to a regular chair this can be attached to the podium and will be able to move along with the podium when the person presses the podium pedals.


Secularity Display:

This is just a general display screen available in the market, but will be coordinated with the system to display issued passes in different locations such as; office, number of visitors, restroom, auditorium, conferences, and etc. In the displayed pass you can see it unique identification number and the how much time the pass is been in the use. An administrator automatically gets the intimation to his programed cell phone about over time passes and he can monitor during his walks in the hallway. Before issuing a visitor pass the relative teacher can confirm his/her pass by watching them from the multi-tab relayed by programmed cameras arranged at out gate along with self-issuing pass machine.


2. Dual Tablet:

This is a combination of tablet and a regular LCD screen, specially customized for classroom use, any ware in the world with the solar power as well as the regular DC-6-12 volts. This book will be made with the aim of bringing the technology into the regular classroom and enhancing the natural reading and writing process from childhood to post PhD. This tablet is enabled with Wi-Fi and all the screens run with programming but this is little bit different. The LCD screen is only capable of playing the teacher relayed audio video (because it uses different format) instructions, or any presentations. Student can store his favorite lessons or pending work lessons, and as well as every day teacher's classroom instructions in his/her personal data space. However teacher can post assignments, notes, ore individualized instructions before a week, to the students account, this will eliminate the regular teacher's extra work for the students with individual requirements of audio video recordings as well as the requirements of Learning disabled including ESOL. Furthermore, teacher can differentiate and also provide modifications according to the individual student needs.


One cannot use this dual-tab for the regular internet browsing; only this is WI-FI enabled with the teachers' broadcasted instructions and to the store their notebooks other network than that one cannot enter into any network. Whereas the second part is, the writing tablet, it is only for reading and writing; one can write and save that forever in the shared system or in to the USB (2.5 or 3.5). First create as many note books you want in the system and use each note book for assigned classroom. In the same note book create rules (lines) for writing and crate graph, draw diagrams use collars and make graphs or geometric diagrams, infect one can have all these effects in one single page or where ever he/she want, regardless of the page type. Even though, student changes their class, it does not matte, he/she can log into their account from any dual tab available in the school.


The written language can be changed in to the print but in order to do that the writer should select one language prior to start writing or after writing from the available languages. The processes completely enhance natural reading and writing skills due to the eye, mind and hand coordination related to individual thinking process. But one cannot bring the software work into the dual tab. But once the written work is turned in to the print it can easily imported into typing software. However, this tablet is only for hand written works but when you convert your handwriting into the print or as tease copy that into your own flash drive, later you can open that in any computer. But this hand written work is always available in the school data base for the school records. This dual tablet will eliminate all the bad browsing problems we have in the class room the display screen is under control of teacher, only student can forward or review, or can store in his school personal space as well as into his personal flash drive. Teacher can prepare for the everyday teaching effectively with the help of audio video recording options as well as can provide modifications without any commitment. The wireless speakers attached to the individual system will completely eliminate the noise problems, now each child can have his instruction in the same content standard, element at his present level accordingly as well as there is not much skills required to operate the system. Teacher can monitor each student in the classroom and communicate with each student individually, warn them, about his/her behavior, teacher can also post his/her expectation to a particular student, and can issue hall pass, rest room pass (a number that student has to remember and use it to open the bathroom door, once the number is issued to a student it will be displayed on the particular restroom's display board with the issued time) for each purpose in the campus including the colleges (at university level) so the administrator finds any student in the hallway he/she can just need the pass number, once he enters the number in the app enabled cell phone he will find all the information about that student.


Each dual tablet book runs with the 12 volt DC power or it has an inbuilt solar sensor, it also converts the light energy into electrical power, so the solar energy can directly store into the tablet battery for emergency backup use.


4. Solar Panel Mounting Frame Come Ventilator:

(i) Roof top (ii) wall insert (iii) battery system


Till date the style in solar system is to arrange the solar panels in one direction and later use the tracking system(with the help of actuators but to run tracking motor also you wasting power) to find the sunlight. However the present invention will differently solve the tracking problem by using the panels in all directions instead of using the tracking system.


Roof Top Solar Panel Mounting Frame:

On four sides of this frame you can mount four solar panels; on the top it has a transparent glass to send the sunlight directly into the classroom. There are four pipe structures under the transparent glass to mount four light sensitive bulbs, these bulbs will automatically on when sunlight is off inside the classroom, so there is no need to use regular electricity to run the lights.


Wall Insert Solar Panel Mounting Frame:

This solar panel mounting frame also has same features but this is designed insert inside the side walls.






FIG. 1 Classroom enabled with Starch


The complete System (Digital podium-1 and dual tablet-60 run by solar power supply) of starch in use, students are using dual tab (60), some are using right hand and some other are using left hand for writing, by sliding with the help of sliding rail (67). while the teacher standing on the base of the five wheel digital pedal podium and using available classroom permanent projector (102) to focus on screen (102a) for displaying the work that he is doing in the multi-tab (FIG: 2-17).



FIG. 2


Podium base (1) is one and half inch flat iron plate to support wheels (2), four pedals (4) and to mount the podium pole (7). The front two pedals (4) are pressed to move forward and back two will be used for backwards, to stop interfering with the back two pedals there is a divider (5a) this divider also works as foot rest. To move forward half of the feet (toes) are used and for backwards ankles should be used.



FIG. 3 Digital podiums—side view


In side view you can see the dual cam and microphone arm (30) and its top view shows camera two-(30a), two audio speakers (35), on the top. At bottom you can see the podium pole attachment clamp (13a) and its lock (13b). The clamp (13a) is mounted into the podium pole's ball Baring (13c) port. On the other side you can see a handle supporting hook (13e) and the break wire (13d) as well as its hook (13f).



FIG. 4: Tab-3 is inserting into the Multi-tab frame first layer


The long custom-made tablet (around 17″ long and 6″ width) (29b) will be inserted into the multitab third layer (32), later it can be attached to tablet power and data transfer inserts (31, 31a, 31b). In order to insert the tablet hand rest rail (24) need to be removed, in this view you also can see the dual cam and microphone arm mounting threads (30g).



FIG. 5 Multi-tab, dual cam and microphone, arrangement view


In the second layer of the multi-tab frame (17) there are three different rails (3333a) to mount three tablets (29, 29a, 29a, and 29b) and hand rest is removed so you can also see dual cam and microphone arm (30). In case you want to mount your personal tablet (any company), just remove one of the tablet and mount yours there.



FIG. 6 Multi-Tab arrangement and front view of mini projector


All the three tablets are arranged in the third layer of frame (17), back side top of the frame there is a writing pad hook connecting pole (23) has a puller (23a), once this pole is pulled out you can hook the writing pad (34) with the help of hook (34b) in order to write on that. Under the writing pad (34) there is a mini laser projector lenses (33a) out is there.


FIG. 7_Multi-tab frame bottom view


Multi-tab frame (17) back view has the fitting arrangement for handle (16), a hand break (15) is mounted on the handle, and this hand break will be connected to the break with the break wire insert (15a) with a break wire. Opposite to the handle on the other sides of the frame you can see there are two sets of USB (19) plug-in ports. In the middle it has audio in and out ports (19b). To give stability to the frame and handle the handle will be connected to the podium pole with the help of two clamps (16a). Under the frame there are four audio speakers (35) and at front there are more audio, video in and out (19c) ports. Opposite side there are more audio video ports for commercial set up (film, TV and event management industry) and power-in and charging connections (19d) are there.



FIG. 8 Multi-tabe inner layers


There are three different layers (36,36a,36b and 36c) to arrange circuit board, energy storage battery, mini projector mounting rails, and third layer for mounting three tablets.



FIG. 9 Multi-tab internal layer (1st) and mini laser projector arrangement


The first layer (rack) (36) is for the circuit board and for the battery. From the first layer to about second layer height, there is a length and width adjustable rail arrangement (33) for mounting cell phone, portable tablets, micro projectors and touch sensitive laser micro projectors (presently available in the market).



FIG. 10 Ball baring clamp to join podium pole and multi-tab frame


The ball baring clamp has a curve place (13g) to tilt the multi-tab frame and for the smooth movement there is two lined ball-baring (13h) arrangement is there.



FIG. 11: The ball baring clamp is welded to threaded pipe


The clamp is welded with a pipe (13i) to fit inside the podium pole.



FIG. 12: Podium Pole—Supporting parts


In this diagram you can see, how the threaded pipe (13i) will be mounted into the podium pipe at handle rotating ball baring arrangement (13c). To give more stability to the handle, an extended hook (13e) is there, to organize the external cables and the break wire there are two cable hooks (13k-1,2). When the pole height adjusting keys (9) are rotated, the pole height will be extended, the ball crew attachment mount (13l) pushes the podium pole extendable internal bar (11). To cover the ball screw arrangement there is a cover for extending bar (10). Podium pole upper part (13) has ball baring arrangement and the lower part (12) has the height adjustment ball screw mechanism.



FIG. 13: Round iron ring clamp with flat mounting plate


The “U” ring (16d) is locked in the clamp with the help of clamp mount (16e) to mount the multi-tab frame there is a punched mounting bracket (16f) with thread holes (16g)for bolts.



FIG. 14: Pedal five wheel


Four pedals (4) designed to give slow movement; there are locks (5) to stop the pedal wheels (2). The divider (5a) prevents the movement of two sides; in case of diminished light inside the building there are lights (6b) and speakers (6a) to give the horn. For temporary stops front break (15a) can be used, fifth wheel is attached to the pedal bike with the help of wheel and tire supporting bars (2a) for turn taking.


FIG. 15:_Podium supporting pole and handle back view


The handle (16) works as wheel turn control, multi-tab tilt control and as well as support for the person to stand. There is a front wheel break (15) attached to the handle, the clamp (16d) stabilizes the handle and the multi-tab connection. For extra stability there is a handle support extension is there on the podium pole. There are two break wire (13d) hooks (13f) to hold and organize the entire wire system (15a) passing through the pole.



FIG. 16: Custom Punched one and half inch iron bar


Podium is constructed on the movable wheel base (1), base is nothing but a custom punched one and half inch flat iron plate.



FIG. 17 Pedal wheel base and its internal parts


To mount pedal and wheel rotating road (2c), there are four custom made square cut spaces (1b). To move the wheel front and back there is a wheel rotate “U” curve (2b, c) is there. To mount podium pole at front there a circular punch (1a) with threads.



FIG. 18 pedal wheel mechanism


To mount the pedal on the base in order to push the wheel rotating “u” curve pedal if needs a pipe clamp (4a.), this will enable the pedal to move up and down into the square space while pushing the “curve up and down, so corresponding that wheels will move.



FIG. 19: The two sided hook (4a) joins both the “u” curve and the pedal pipe in order to create the rotating movement by moving up and down. In order to separate the leg movement and to prevent touching the two pedals while pushing other there must be a divider required. To mount the divider's (foot rest) there are eight mounting poles (6d) on the base.



FIG. 20: To lock the pedal movement each individual pedal has a lock (5), if you moves one of your feet forward in between one of the two locks, it will lock those two pedals. If you moving forward and using front two pedals so the back two pedals are not to be interacted, so for that there is a divider (5a). While moving forward both the toes are working and during backwards both the angels will be in working.



FIG. 21: podium standing base back view


At the back side of the podium base there is a lock (3), this lock has two parts on will insert into the chair and the other one will be locked with wheel chair bar (39d-FIG. 33) lock.



FIG. 22: Pedal bike without podium


You can see the podium pole (12-FIG. 2) is mounted on the five wheel base with pipe handle (16) these five-wheels can be stopped by pressing hand break (15) with the help of break (15a).



FIG. 23: Podium with five wheel chain bike


This bike run by a chain wheel axil, the two pedals (4) are connected to a chain wheel axil. This type five wheel has only one pedal lock (5) a hand break (15, 15a), hood (6d) to cover wheel chain, on the hood it has a light and horn (6c) arrangement too.



FIG. 24: Podium with five wheel chain bike The chain wheel bike is now mounted with Multi-tab frame (17), on podium pole there is a two sided extinction of foot rest (8) and back of the base it has a lock system (3) for the wheel chair.



FIG. 25: Pedal bike with podium



FIG. 26: Writing pad and dual cam enabled with mini focusing projector on pedal five wheels podium


On five wheels podium you can see a person placed his one foot on foot rest (8), fixed the writing pad (34) to the hook (23a) and focusing it through the dual cam arm (30a) from the mini projector (available in the market) on to a screen (33b). Recommended mini projectors presently available in the market can be used with the system.



FIG. 27: Moving on chain wheel podium inside the building


In this figure you can see a person using both the chain pedals (4) and moving forward by controlling handle (16).



FIG. 28: Chain podium internal mechanism


To arrange the chain at lower height and to move the Peron on the top of it, the base (1) is custom designed with a one and half inch flat iron plate and it is square punched (cut) to arrange the chain axil (4f) with road (4e). The axil rode is attached to a pedal mount (4i) in order to mount pedal (4-FIG. 29), for giving support to the pedal there is a rotating wheel (4j) with extended curve rode (4k). So when the chain (4h) is connected to the front wheel axil (2d) road, those wheels (2) will be moved when the pedal is pressed down. Simultaneously when one pedal goes down the other side pedal mount (4f), (4) will move up. In this figure you can also see the podium pole mounting threaded hole (1a) at front of the wheels.



FIG. 29: Pedal mounted on the two extension rods


In order to give support to the feet pedal (4) is mounted on the two extended rods of axil wheel and supporting wheel.



FIG. 30: Chain moving pedal comfort arrangement


To give extra support for foot, pedal is designed with extended edge (4kJ) and to lock these two pedals there is a single lock (5), when lock is pressed down, lock extinctions will exit through lock out (5c) ports.



FIG. 31: Chain wheel cover support pole


In order to mount a hood to cove the mechanical system there are four extended hood mounting poles (6d) on the base.



FIG. 32: Chain wheel covered with plastic hood


The hood (6e) covers the mechanical system and also gives support to the light and horn (6c) to as prevents from any accidents. To mount the front wheel there is a mounting extinction (6f) at front. In order to stabilize the pedal there is a clamp (4l) on both sides of the each pedal.



FIG. 33 Height adjustable single pole chair


This chair (36) is uniquely designed to combine with the five wheel pedal bike and as well with the chain pedal five wheel bikes. In order to combine with any one of these bikes there is an insert lock (38) at bottom of the chair (40) attached to the pole (36a) by a ring mount (36b) and a base (35). Base also supports the four wheels (37) with their rods. The pole (Mechanical pole) height can be adjusted by rotating the key (36c). To support the examiners trunk there is an extra height extended curved pipe (40a) is attached to the trunk supporter (40b). To create complete stability to move along with the podium bike there is an extendible pipe (39). This pipe is tilt enabled due to the joint arm clamp (39a), when required move the arm by rotating the key (39e) and lock to the base of podium bike with the help of lock key (39d).



FIG. 34: Pedal podium connected with a single pole (actuator) wheel chair


In this figure you can see how the arm is locked with podium lock (3) and how the arm (39d) is separated from the chair.



FIG. 35: Dual cam, microphone and multi-tab system is in use


In this picture you can see how a teacher is recording her group activity with front cam and her instructional teaching using microphone (30c) with back cam (30a). The Multi tab is enabled and back cam's output can be seen in the two screens (42), and front cam's output is also monitored in third tab (44). At the same time teacher editing at real time with the help of operating keys (45) as well as she is saving it in the system. The wheel chair (36) is connected to the five wheel podium so the teacher can move around and as well as shoot with two different cams at different angles, further she can edit it at real time.


FIG. 36:_Dual cam and microphone arm


This dual cam and micro phone arm (30) have two digital video cams (30a, b) front and back to capture video same time in both directions (teacher and students) if any external camera, or audio devises are using to record anything those also can be attached to the system through the audio video in and out ports (19,19a, 19b, & c-FIG. 7). Any external dives can also be connected to the multi-tab through thunderbolt or wireless/wireless USB, etc.



FIG. 37: Digital podium functions in the classroom


The is an example model, how you can use podium regularly in the classroom during the class time, a teacher can monitor her/his school, classroom, and be able to communicate with his/her students as well as with administrative staff without moving and talking. The total “18” number of students in row (47), but one student Sam (not a real name) (47a) trying to communicate with teacher and teacher sent warning to another student (46) to Be Quit. Other student sent a request for Rest room Pass (48). However, she already has a student in the restroom from last fifteen minutes (52) so it is time to Contact Administrator (52a). However all the administrators will get immediate alerts automatically from the system into their cellphone app. In order to issue a restroom passes to another student. Teacher can get information through the system from all the restrooms in the school via wireless display system on each rest room (FIG. 45). So before she/he issue a pass first she/he reports about one of his/her student not reporting to class back and can issue a new pass to another student according to the vacancy in the nearest rest room accordingly. In case of system failure student can press the bozen available in the restroom for help. While all this happening teacher can record her teaching and monitor in one tablet (51) as well as she/he can preview the teaching material she/he want to send into student's dual tab (FIG. 40) or to the permanent projector/mini projector (38) as well teacher can write directly on one of the tabs (50) and focus it simultaneously. If, teacher want to use his personal tablet (any brand) into the multi-tab port, it is possible too. So students can watch teacher examples on the board and they can do their assignment given to them in the dual tab (FIG. 40), as well as watch the prerecorded tutorial already sent to them. Other than that teacher can differentiate teaching for any student (FIG. 41), in case of such requirements of gifted, exceptional, or any other such individual requirements. Individualized teaching through pre-designed audio-video material and reading, writing material at the same time teacher can give individual attention immediately as required. Infect the exceptional student also can have individualized audio-visual material (prerecorded video, audio, modified reading and teaching material) through dual tab (40). Furthermore each student can go back and forth of the topics or topic related to the content with the help of dual tab and can have his/her_required volume with the help of wireless ear phones (FIG. 43-72), in order to prevent allergies school systems must provide individual wireless ear-phones.



FIG. 38: Tactile enabled laser display from mini projector Presently in the market there are many mini projectors, in order to mount them there is a length and width adjustable mini projector come cell phone port (FIG. 9-33). You can mount the mini laser projectors or any cell phone for display. Once you place the laser tactile enabled mini projector in the port (FIG. 9-33) it will display through the lenses (FIG. 6-33a), (54). However the lenses (FIG. 6-33a) also can be adjustable according to the distance of board or wall. In the present figure you can see how you can work with tactile enabled laser display (53). It will work, when you touch where ever the touch is enabled (55).



FIG. 39 permanent digital podiums


Permanent podium also has the same features just like the pedal and chain wheel podium except the operating wheel instead of operating base, permanent podium has unmovable permanent stand (58). You can fix temporary wheels (57) in to the given threads (59), when you want to move it from one place to another place. Preeminent podium also has a two side foot rest (13p) and a program display board (56). More over each presenter can slide their personal phone, or tablet into the system if they want to present anything.


FIG. 40:_Dual tablet


This is nothing but two screened tablet (60), one side is for display (64) and the second screen (62) is completely dedicated to writing. However, in case of individual requirements (example FIG. 42) you can also customize the dual tablet. The display screen is non-tactile and only displays the things relayed by the teacher from the multi-tablet (FIG: 24-17) this will completely eliminate the bad browsing problems of students in the classroom. However, student can watch previous lessons, or presentations with the help of operating keys (63) and can view missed things using the four way key (63c) as well as he/she can also download the lessons into the USB drive by inserting their own personal USB drive. However, their personal files cannot be displayed or played in any of the screens, due to the customized software in the system. The screen one is tactile enabled however also can write with any touch screen pen available in the market. In this screen student can write without any rules (62a) and can enable rules (62b) when he/she want with the help of operating keys (63) at both right and left side. Same functionality keys are given both right and left (63, 63d)) side for the convenience of left handed and right handed students. When required you can also draw graphs with the help of graph lines at required place in the paper and rest of the place you can leave it as white paper (62c, 62d). While writing to place hand pam weight there is a pam rest place (61). With the help of operating keys student can communicate with teacher without saying a word, for instance operating keys or customized for students expressing their requirements of nurse pass, restroom pass, help in class work, any emergency etc., as well as teacher can also send her/his requests, requirements, expectations, remainders, warnings into the display screen. Written tests can be opened directly in the writing tablet, whereas, the test instructions can be displayed with example audio and video along with teacher instructions.



FIG. 41 A students using dual tablet in the classroom


For the convenience of left handed people the dual tab book can be slide to left side, because the dual tab is mounted on the rail (67) attached to the student desk. When the student changes, according to his/her physical habits, he/she can slide it, and can log of from the system when finished. The dual tab runs on 12 volts Direct current stored in the battery (FIG. 50-96), however there is a personal battery in the dual tab can be run for hours (depend on the battery chosen by customer). In case both batteries are out of charge, the power supply system automatically shifts to regular power supply in emergency. So you have only one supply cable (68), form custom designed supply system (66) from the ground. The person in this picture slide (moved) the dual tab to left side and writing with writing stick (65) with his left hand, once the period ends, the next student comes, he can slide it back to right side.



FIG. 42: Dual tablet enabled with finger print recognition for public poling


Dual tablet can be used for different purposes when it customized. Here dual tablet is customized for public poling by a custom designed finger print recognizing (62g) software (will be designed with the help of professionals) in order to conduct the public opinion pole. The circular box is the place for contestant ID picture (62f), and his campaign symbol (62e). Finger prints or recognized due to the pressure applied on the tactical screen in to a color filled box (62), due to the pressure the color in the box spreads around and the fingers impression will be recognized immediately according to the memory preloaded into the system. However, in order to stop the interference of the previous finger marks screen will be made with anti-finger mark material.


FIG. 43_Solar powered dual tablet


A custom built the two sided solar panel (purchased form market) (69), this panel is tiltable due to the inbuilt pipe setup (71). In case, if screen is invisible due to the sun light, in order to prevent that screen can be tilted with the help of screen tilting hook (70). To personalize the audio there are two wireless audio speakers (ear phones) (72) at left side of the screen two.



FIG. 44: Solar powered dual tablet back view


Second side of solar panel (69a), rile insert (73) and circuit board cover (74) as well as battery cover 75) can be seen at the back view of the solar power dual tab (also same for the regular dual-tablet).


FIG. 45_Security system display on school restroom with number locked doors


The display (78) is just a display screen available in the market; however this will be operated by the custom designed software in order to control the student pass, as well as to control the security problems from outside. You can operate any door with the number lock sensor (already available in the market). Issued pass will be displayed in the display board (79) with a unique identifying number (80) but the number lock is only issued to the student in his dual tablet whenever student requests the teacher. This two numbers (door key and pass number) are issued by the system run software, so same number will not be issued twice. Once the student (person) enters into the restroom (any room or designated place) by dialing his key number on door dial pad (76), from that movement his time will be activated (81). However, in teacher's monitor she/he can watch both the times (after entering the restroom and the time from the classroom) in the multi-tab. If the school system wants to use the pass number for visitors, a digital token printer (available in the market) should be programmed with the system. Once the visitor punches the pass and dials that number on the front door dial pad, from that movement visitor's picture and as well as his timer will be enabled automatically and will be available to any of the teacher who gets the admin pass. If the system also includes the digital metal detector come scanner at front door, this will reduce maximum sudden threats from outside.



FIG. 46: Solar panel mounting frame come sunlight ventilator


This is (84) just a sheet metal and wood molded rectangular shape box with four sided solar frame (85, 85a) to insert the solar panel (96b), on the top it has transparent glass (87) to pass the sun light and at the bottom of the glass there are four plastic pipes (88) for inserting the self-censure(censors will be purchased from market) solar lights (these lights will automatically on when the sun light gets down in the morning time. To insert the frame into the roof there is extinction (85b) at back side of the frame.



FIG. 47 Solar panel mounted on one side of frame


While the solar panel (purchased from market) (96b) is being mounted into the one side of frame, you can adjust the flow of the electricity with the help of two way cotter inch pin power cable in series or parallel circuit according to your requirement.


FIG. 48:_Wall insert solar panel mounting frame come ventilator


To insert into the wall there is extinction (92) for the frame, the glass ventilator (87) is arranged flat due to the frame to be inserted into the wall. The self-censored light mount pipes (88) are also there under the mirror, wall insert also has four sides' frame (86) and supply pins (85) are there. However the fourth panels frame (91) is very small due to the lack of space.



FIG. 49: Solar panel mount frame when inserted into the wall


Inside the room, frame has curve glass (93) ventilation and the extinction (95) for the proper wait control on the wall (94) can be seen in this figure, frame also requires back side support.



FIG. 50: Solar power storage system as well as supply method for dual tablets in the classroom.


Once the solar panel frames are arranged on the side of the walls and on roof, ventilators (9) will give sunlight as well as supply power (from solar panels) to the storage system (96) in to each class, room. The stored power will be supplied through a systematic wired through side of the walls (97a) as well as in the floor (97). However, each system (multi-tab, dual-tab and display system) has their individual storage battery system once they are charged they work at an average of 7-12 hours and the power stored in the main system (96) in each classroom works as back up vice versa. In case of emergency regular supply will be used automatically. Even individual room AC (99) system also runs by the solar power with proper monitoring arrangement (required solar technology is already available in the market). For more ventilation each side of the wall must have two air-tite transparent glass windows. Usually schools and universities will have larger building structures if all these enabled with STARCH, they also become larger sources of electricity. The extra stored power (electricity) during holidays can be uploaded into the State or National supply system, so by that educational systems also can earn some extra money to spend their projects.



FIG. 51 A model two stair school building completely enabled with solar power by mounting frames on wall and roof to run STARCH as well as for common use.





The solar panels mounted on the roof (84), side of the wall (90), and minimum two air-tite glass windows (98) on each side of the class room. Schools should always have alternative to save power like here this school has on regular stairs (100) (to save power) and lift (100a).


FIG. 1:


60. Dual tablet in use by a student at left side



67. Tablet sliding rail attached to student desk



102. Permanent display projector in the school



102
a A permanent display board



1. Base


FIG. 2:


1. Wheel podium beam cover



2. Wheels



3. Wheel chair lock—(i)



4. Pedal



5. Lock



6. Podium top cover



7. Podium pole



8. Foot rest



9. Podium pole height adjusting keys



10. Pole threads cover



11. Internal threaded pole



12. Multi-tablet frame connecting pole



13. Cone shape multi-tablet connecting baring arrangement structure



14. Audio video in and out



15. Handel



16. Handle support combines the multi-tab frame and podium pole



17. Multi-tab Frame



18. Air flowing way



19. USB in



20. USB in



21. Operating keys



22. Four way key



23. Writing pad hook connecting pole



24. Arm rest rail for movement



25. Arm rest supporting bracket



26. Arm rest



27. Hand grip



28. Writing pad



29. tablet-1



29
a. tablet-2



29
b. tablet-3



30. Dual cam and microphone arm


FIG. 3


30. Dual cam and microphone arm



30
a. video cam-1



35. Audio speakers



13
a. Multi-tab tilting u-clamp mounts



13
b. Multi-tab frame tilting lock



13
c. Ball baring arrangement for handle movement



13
d. Front break connecting wire



13
e. Handel clamp support



13
e. Wire holding hook


FIG. 4


29
b. Tablet-3



30
g. Arm rest clamp mounting thread



24. Arm rest rail



31
a. Tablet power and data transfer inserts



31
b tablet power and data transfer inserts



32. Layer-3


FIG. 5


29, a, b. Tablet 1, 2, & 3



30. Dual cam and micro phone arm



33. Tablet movement and mounting rails


FIG. 6


17. Multi-tab frame



23. Writing pad hook (34b) connecting pole



23
a. Writing pad hook pulling ring



34. Writing pad rotating rod



34
a. Writing pad reliable sheet.



34
b. Writing pad hook



FIG. 7



15. Front wheel break



15
a. break wire valve



16. Handel



16
a. handle stabilizing clamps



16
c. “u” clamp mount



17. Multi-tab frame



18. Air ventilation (fan)



19, 19a. USB connection



19
b. audio video in and out ports



19
c. extra audio video cable in and out



19
d. power and charging in



35. Audio speaker


FIG. 8


36. Layer-1 for lithium battery



36
a. Layer-2 for circuit board



36
b. Layer-3 for multi-tab mounting rails



36
c. power and data transfer connections


FIG. 9

Layer-1



33. Length and width adjustable phone/mini projector mount


FIG. 10


13
g “u” clamp mounting space



13
a. side of the bracket



13
h. Ball Barings for “u” clamp smooth movement



FIG. 11



13
i. thread pipe to mount in the podium pole


FIG. 12


9. Pole height adjusting keys



10. Cover for extending bar



11. Podium pole extendable internal bar



11
a. ball baring crew extinction to rotate



12. Podium pole lower part



13. Podium pole upper part of (baring part)



13
c. handle rotating ball Barings



13
e. Handle support hook



13
k. Cable hook-1



13
j. thread pipe to fit in ball bring podium pole



13
i. Crew mounts for Handel stabilizer (16a)



13
k. Cable hook-2



13
l. Ball crew rail attachment mounts for internal bar (11)


FIG. 13


16
d. “U” clamp to mount under the multi-tab frame at (16c)



16
e. “u” clamp mount



16
f. mounting bracket



16
g. thread hole to combine clamp and bracket


FIG. 14


2. Wheel



2
a. wheel and tire supporting bars



2
b. wheel pole mounting bar



15
a. breaks



6
a. speaker



6
b. light



5. Wheel lock



5
a. food rest



4. Pedal



3
a. wheel chair locks system


FIG. 15


13
d. Break wire



13
e. handle support



13
f. break wire hook



15 Frond wheel handle break



15
a. break wire insert



16 handle


FIG. 16


1 Custom punched 1.5 inch iron beam



1
c. square space to mount pedal


FIG. 17


1. Podium base



1
a. podium pole mounting hole



1
b. space for pedal



2
c wheel rotating rod



2
b. wheel rotate “u” curve


FIG. 18


4
a. Pedal mounting pipe clamp


FIG. 19


4
b. pedal pipe “connecting two side hook



4
c. pedal extinction clamp



5
b. pedal lock space



6
d. foot rest mounting supporting poles


FIG. 20


1
a. Podium pole mounting hole



5. Pedal lock



2
e. wheel rotating pole



5
a. foot rest


FIG. 21


3. Wheel chair bar (39d) lock


FIG. 22


15. Front wheel Handel break



15
a. break



16. Handle


FIG. 23


15. Front wheel hand break



5. Pedal lock



4. Pedal



6
d. hood



6
c. light and horn



15
a break


FIG. 24


8. Foot rest



3. Locks


FIG. 25

Pedal podium with multi-tab


FIG. 26


8. Foot rest



23
a. writing pad hook



34
b. arm rest support moving rail



26. Arm rest



34
a writing pad



30
a dual cam and micro phone



33
b. mini projector focused on screen


FIG. 27


4. Pedal is connected to Cain wheel (4f-FIG. 28)



16. Handle


FIG. 28


1. Base



1
a. Podium pole mounting hole



2
d. front wheel rotating rod



4
e. axil rotating road



4
f. chain axil wheel



4
g. chain axil rotating pedal



4
h. chain



4
i. pedal mount



4
j. extra support wheel



4
k. pedal support wheel extinction


FIG. 29


4. Pedal (made by combining axil wheel extension and extra support wheel extension)


FIG. 30


4
k foot support on pedal



5. Pedal lock



5
c. Pedal lock out


FIG. 31


6
d. hood supporting poles


FIG. 32


4
l. extra support clamp to pedal



6
c. light and horn



6
e. hood



6
f. front wheel mounting poles


FIG. 33


35. Chair wheel and cylinder support frame



36. Custom made actuator



36
a. iron ring



36
b. actuator height adjustment key



36
c. Iron pipe



37. Wheels



38. Lock insert



39. Extendable lock arm



39
a. lock arm clamp



39
b. arm extinction key lock



39
c. arm extinction key



39
d. Lock key



39
e. extinction arm insert



40. Sitting space



40
a. extended back rest



40
b. back rest



41. Teacher bag


FIG. 34


39
d. arm extinction is locked inside the lock (3)



3. Lock


FIG. 35:


30. Dual cam and microphone arm



42. Video out of cam-(30a) is enabled in multi tab 29, and 29b



43. Recording subject



44. Video out of cam-2(30b) video out sent to tab-29



45. Real time editing key board and operating keys



FIG. 36



30
a. cam-1



30
b-cam-2



30
c. Micro phone



30
d. base Pipe clamp



30
e. support base



30
f. Micro rail



30
g tilt-2—clamp



30
h. rotation clamp


FIG. 37


46. Teacher sent Be Quit request to a student



47. Students are shown as boxes in rows



47
a. Student (Sam) is trying to communicate with teacher



48. A student sent request for pass



49. Tablet (29b) screen is divided into two parts



50. Teacher Hand Writing



51. Second tablet is assigned for previewing the work before sending to student or watch ongoing recordings.



51
a. Power point preview



52. Student pass number as well as time of he/she been out from class for 15 minutes.



52
a. Contact administrator


FIG. 38


53. Laser projector display and touch enabled



54. Laser ray



55. Touch the places where the touch is enabled



FIG. 39



1
p. foot rest



56. Program poster display board.



57. Wheel to be fixed in the tread hole (59)



58. Permanent Stand



59. Treaded hole for wheels


FIG. 40


60. Dual tablet book



61. Pam rest (while writing)



62. Hand writing enabled visible screen



62
a. free writing area without rules



62
b. Rules are enabled when required



62
c. second white space as well graph area



62
d. Rules are enabled again when required



63. Operating keys



63
a. USB for record input in the screen two (64)



63
b. input display from multitasks (29, a, & b)



63
c. four way key to manage the input display in screen two (64)



63
d. left side operating keys



64. Screen two


FIG. 41


65. Writing stick using from left side



66. Power supply



67. Dual tab sliding rail to adjust for right and left handed writing



68. Power card connected to dual tab


FIG. 42


62
e. symbol of contestant



62
f. contestant Id



62
g. Thumb impression recognizer enabled space


FIG. 43


69. Micro solar panel



70. Screen tilting hook



71. Two side micro solar panel rotating key



72. Wireless ear phones


FIG. 44


69
a. Side two micro solar panel



73. Sliding rail insert clamp



74. Circuit board opening cover



75. Battery opening cover


FIG. 45


76. Number locked door



77. Rest room



78. Wireless screen display



79. Student pass



80. Student identifying pass number



81. Time of pass issued



82. Over time pass



83. Total number of person in the rest room


FIG. 46


84. Multi-solar panel mount frame—come roof top ventilator



85. Supply attachment to solar panel (+/−)



85
a. supply attachment in other side frame



86. Solar panel mount



86
a. Solar panel mount



87. Mirror



88. self-sensor individual solar light


FIG. 47


89. Series and parallel patron arrangement quarter inch cable in (+/−)



99
a. two sided pin cable


FIG. 48


85. Supply attachment to solar panel



86. Solar panel mount



87. Mirror



88. Self—sensor individual solar light



90. Wall mount solar panel frame—come ventilator



91. Solar panel mount frame


FIG. 49


93. Carved glass ventilation



94. Wall



95. Frame extinction to sit inside the wall


FIG. 50


9. Wall sun ventilator glass



96. Storage battery



97. Power supply on floor



97
a. power supply on wall



99. Individual room AC


FIG. 51


84. Roof top solar panel mount frame



90. Wall solar panel mount frame



98. Air title transparent window



100. Walking upstairs entry into tares



100
a. lift entry into the tares

Claims
  • 1. A group of apparatus for security, teaching and solar power maintenance of schools as well as for universities, in order to monitor visitor pass, campus pass, monitor class room, provide instruction through pre-recorded audio video, record teaching, real time editing, individualized reading writing training, and managing solar power, the security, teaching and solar power maintenance apparatus comprising: a. four pedaled frame work of base a plurality of moving and monitoring in the class room, this five wheel pedal bike designed to move forward and backward by pedaling, to project and relay teaching material through a multi-tablet podium in to the available classroom projectors or thorough a mounted mini laser projector, and into to a dual tablet notebook of each child in the classroom.