The vanilloid receptor 1 (VR1) is the molecular target of capsaicin, the active ingredient in hot peppers. Julius et al. reported the molecular cloning of VR1 (Caterina et al., 1997). VR1 is a non-selective cation channel which is activated or sensitized by a series of different stimuli including capsaicin and resiniferatoxin (exogenous activators), heat & acid stimulation and products of lipid bilayer metabolism, anandamide (Premkumar et al., 2000, Szabo et al., 2000, Gauldie et al., 2001, Olah et al., 2001) and lipoxygenase metabolites (Hwang et al., 2000). VR1 is highly expressed in primary sensory neurons (Caterina et al., 1997) in rats, mice and humans (Onozawa et al., 2000, Mezey et al., 2000, Helliwell et al., 1998, Cortright et al., 2001). These sensory neurons innervate many visceral organs including the dermis, bones, bladder, gastrointestinal tract and lungs; VR1 is also expressed in other neuronal and non-neuronal tissues including but not limited to, CNS nuclei, kidney, stomach and T-cells (Nozawa et al., 2001, Yiangou et al., 2001, Birder et al., 2001). Presumably expression in these various cells and organs may contribute to their basic properties such as cellular signaling and cell division.
Prior to the molecular cloning of VR1, experimentation with capsaicin indicated the presence of a capsaicin sensitive receptor, which could increase the activity of sensory neurons in humans, rats and mice (Holzer, 1991; Dray, 1992, Szallasi and Blumberg 1996, 1999). The results of acute activation by capsaicin in humans was pain at injection site and in other species increased behavioral sensitivity to sensory stimuli (Szallasi and Blumberg, 1999). Capsaicin application to the skin in humans causes a painful reaction characterized not only by the perception of heat and pain at the site of administration but also by a wider area of hyperalgesia and allodynia, two characteristic symptoms of the human condition of neuropathic pain (Holzer, 1991). Taken together, it seems likely that increased activity of VR1 plays a significant role in the establishment and maintenance of pain conditions. Topical or intradermal injection of capsaicin has also been shown to produce localized vasodilation and edema production (Szallasi and Blumberg 1999, Singh et al., 2001). This evidence indicates that capsaicin through it's activation of VR1 can regulate afferent and efferent function of sensory nerves. Sensory nerve involvement in diseases could therefore be modified by molecules which effect the function of the vanilloid receptor to increase or decrease the activity of sensory nerves.
VR1 gene knockout mice have been shown to have reduced sensory sensitivity to thermal and acid stimuli (Caterina et al., 2000)). This supports the concept that VR1 contributes not only to generation of pain responses (i.e. via thermal, acid or capsaicin stimuli) but also to the maintenance of basal activity of sensory nerves. This evidence agrees with studies demonstrating capsaicin sensitive nerve involvement in disease. Primary sensory nerves in humans and other species can be made inactive by continued capsaicin stimulation. This paradigm causes receptor activation induced desensitization of the primary sensory nerve—such reduction in sensory nerve activity in vivo makes subjects less sensitive to subsequent painful stimuli. In this regard both capsaicin and resinferatoxin (exogenous activators of VR1), produce desensitization and they have been used for many proof of concept studies in in vivo models of disease (Holzer, 1991, Dray 1992, Szallasi and Blumberg 1999).
The present invention comprises a new class of compounds useful in the treatment of diseases, such as vanilloid-receptor-mediated diseases and other maladies, such as inflammatory or neuropathic pain and diseases involving sensory nerve function such as asthma, rheumatoid arthritis, osteoarthritis, inflammatory bowel disorders, urinary incontinence, migraine and psoriasis. In particular, the compounds of the invention are useful for the treatment of acute, inflammatory and neuropathic pain, dental pain, general headache, migraine, cluster headache, mixed-vascular and non-vascular syndromes, tension headache, general inflammation, arthritis, rheumatic diseases, osteoarthritis, inflammatory bowel disorders, inflammatory eye disorders, inflammatory or unstable bladder disorders, psoriasis, skin complaints with inflammatory components, chronic inflammatory conditions, inflammatory pain and associated hyperalgesia and allodynia, neuropathic pain and associated hyperalgesia and allodynia, diabetic neuropathy pain, causalgia, sympathetically maintained pain, deafferentation syndromes, asthma, epithelial tissue damage or dysfunction, herpes simplex, disturbances of visceral motility at respiratory, genitourinary, gastrointestinal or vascular regions, wounds, burns, allergic skin reactions, pruritus, vitiligo, general gastrointestinal disorders, gastric ulceration, duodenal ulcers, diarrhea, gastric lesions induced by necrotising agents, hair growth, vasomotor or allergic rhinitis, bronchial disorders or bladder disorders. Accordingly, the invention also comprises pharmaceutical compositions comprising the compounds, methods for the treatment of vanilloid-receptor-mediated diseases, such as inflammatory or neuropathic pain, asthma, rheumatoid arthritis, osteoarthritis, inflammatory bowel disorders, urinary incontinence, migraine and psoriasis diseases, using the compounds and compositions of the invention, and intermediates and processes useful for the preparation of the compounds of the invention.
The compounds of the invention are represented by the following general structure:
or a pharmaceutically acceptable salt thereof, wherein m, n, o, L1, L2, Q1, Q2, Q3, Q4, Q5, Q6, R1, R2, R2′, R3 and R4 are defined herein.
The foregoing merely summarizes certain aspects of the invention and is not intended, nor should it be construed, as limiting the invention in any way. All patents, patent applications and other publications recited herein are hereby incorporated by reference in their entirety.
One aspect of the current invention relates to compounds having the general structure:
or any pharmaceutically-acceptable salt thereof, wherein:
L1 is a saturated, unsaturated, or partially-saturated chain of 1, 2 or 3 carbon atoms substituted at each open position by R2;
L2 is a saturated, unsaturated, or partially-saturated chain of 1, 2 or 3 carbon atoms substituted at each open position by R2′; wherein the combined number of carbon atoms in the L1 and L2 chains is 3, 4 or 5; wherein, when L1 is a one carbon chain and Q1 and Q2 are both N, then L1 is carbonyl, and when L2 is a one carbon chain and Q1 and Q2 are both N, then L2 is carbonyl;
m is independently at each instance 0, 1 or 2;
Q1 is N or C(R2);
Q2 is N or C(R2); wherein at least one of Q1 and Q2 is N;
Q3 is N or C(R5);
Q4 is N or C(R6);
Q5 is N or C(R6′);
Q6 is N or C(R5′);
R1 is H or —(C(R2)(R2))m—Rg;
R2 is, independently, in each instance, H, C1-8alkyl, C1-4haloalkyl, —O(C1-7alkyl), —N(C1-7alkyl)Ra, or a C1-6alkyl substituted by 1, 2 or 3 substituents selected from halo, cyano, —ORa, —OC(═O)Rb, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —NRaC2-6alkylNRaRa and —NRaC2-6alkylORa; wherein any two geminal R2 groups may additionally be oxo;
R2′ is, independently, in each instance, H, C1-8alkyl, C1-4haloalkyl, —O(C1-7alkyl), —N(C1-7alkyl)Ra, or a C1-6alkyl substituted by 1, 2 or 3 substituents selected from halo, cyano, —ORa, —OC(═O)Rb, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —NRaC2-6alkylNRaRa and —NRaC2-6alkylORa; wherein any two geminal R2′ groups may additionally be oxo;
R4 is phenyl or naphthyl, wherein the phenyl and naphthyl are substituted by 1, 2, 3 or 4 substituents selected from Rc, Re, halo, C1-4haloalkyl, cyano, nitro, —C(═O)Re, —C(═O)ORh, —C(═O)NRaRh, —C(═NRa)NRaRh, —ORh, —OC(═O)Re, —OC(═O)NRaRh, —OC(═O)N(Ra)S(═O)2Re, —OC2-6alkylNRaRh, —OC2-6alkylORh, —SRe, —S(═O)Re, —S(═O)2Re, —S(═O)2NRaRh, —S(═O)2N(Ra)C(═O)Re, —S(═O)2N(Ra)C(═O)ORh, —S(═O)2N(Ra)C(═O)NRaRh, —NRaRh, —N(Ra)C(═O)Re, —N(Ra)C(═O)ORh, —N(Ra)C(═O)NRaRh, —N(Ra)C(═NRa)NRaRh, —N(Ra)S(═O)2Re, —N(Ra)S(═O)2NRaRh, —NRaC2-6alkylNRaRh, —NRaC2-6alkylORh, —C(═O)Rg, —C(═O)ORg, —C(═O)NRaRg, —C(═NRa)NRaRg, —ORg, —OC(═O)Rg, —OC(═O)NRaRg, —OC(═O)N(Ra)S(═O)2Rg, —OC(═O)N(Rg)S(═O)2Re, —OC2-6alkylNRaRg, —OC2-6alkylORg, —SRg, —S(═O)Rg, —S(═O)2Rg, —S(═O)2NRaRg, —S(═O)2N(Rg)C(═O)Re, —S(═O)2N(Ra)C(═O)Rg, —S(═O)2N(Rg)C(═O)ORh, —S(═O)2N(Ra)C(═O)ORg, —S(═O)2N(Rg)C(═O)NRaRh, —S(═O)2N(Ra)C(═O)NRaRg, —NRaRg, —N(Rg)C(═O)Re, —N(Ra)C(═O)Rg, —N(Rg)C(═O)ORh, —N(Ra)C(═O)ORg, —N(Rg)C(═O)NRaRh, —N(Ra)C(═O)NRaRg, —N(Rg)C(═NRa)NRaRh, —N(Ra)C(═NRa)NRaRg, —N(Rg)S(═O)2Re, —N(Ra)S(═O)2Rg, —N(Rg)S(═O)2NRaRh, —N(Ra)S(═O)2NRaRg, —NRhC2-6alkylNRaRg, —NRaC2-6alkylNRaRg, —NRgC2-6alkylORh and —NRaC2-6alkylORg; or R4 is Rc substituted by 0, 1, 2, 3 or 4 substituents selected from Rc, Re, halo, C1-4haloalkyl, cyano, nitro, —C(═O)Re, —C(═O)ORh, —C(═O)NRaRh, —C(═NRa)NRaRh, —ORh, —OC(═O)Re, —OC(═O)NRaRh, —OC(═O)N(Ra)S(═O)2Re, —OC2-6alkylNRaRh, —OC2-6alkylORh, —SRe, —S(═O)Re, —S(═O)2Re, —S(═O)2NRaRh, —S(═O)2N(Ra)C(═O)Re, —S(═O)2N(Ra)C(═O)ORh, —S(═O)2N(Ra)C(═O)NRaRh, —NRaRh, —N(Ra)C(═O)Re, —N(Ra)C(═O)ORh, —N(Ra)C(═O)NRaRh, —N(Ra)C(═NRa)NRaRh, —N(Ra)S(═O)2Re, —N(Ra)S(═O)2NRaRh, —NRaC2-6alkylNRaRh, —NRaC2-6alkylORh, —C(═O)Rg, —C(═O)ORg, —C(═O)NRaRg, —C(═NRa)NRaRg, —ORg, —OC(═O)Rg, —OC(═O)NRaRg, —OC(═O)N(Ra)S(═O)2Rg, —OC(═O)N(Rg)S(═O)2Re, —OC2-6alkylNRaRg, —OC2-6alkylORg, —SRg, —S(═O)Rg, —S(═O)2Rg, —S(═O)2NRaRg, —S(═O)2N(Rg)C(═O)Re, —S(═O)2N(Ra)C(═O)Rg, —S(═O)2N(Rg)C(═O)ORh, —S(═O)2N(Ra)C(═O)ORg, —S(═O)2N(Rg)C(═O)NRaRh, —S(═O)2N(Ra)C(═O)NRaRg, —NRaRg, —N(Rg)C(═O)Re, —N(Ra)C(═O)Rg, —N(Rg)C(═O)ORh, —N(Ra)C(═O)ORg, —N(Rg)C(═O)NRaRh, —N(Ra)C(═O)NRaRg, —N(Rg)C(═NRa)NRaRh, —N(Ra)C(═NRa)NRaRg, —N(Rg)S(═O)2Re, —N(Ra)S(═O)2Rg, —N(Rg)S(═O)2NRaRh, —N(Ra)S(═O)2NRaRg, —NRhC2-6alkylNRaRg, —NRaC2-6alkylNRaRg, —NRgC2-6alkylORh and —NRaC2-6alkylORg, wherein R4 is not imidazole or any substituted derivative thereof,
R5 is H, Re, C1-4haloalkyl, halo, cyano, nitro, —C(═O)Re, —C(═O)ORe, —C(═O)NReRa, —C(═NRa)NRhRa, —ORh, —OC(═O)Re, —OC(═O)NRaRh, —OC(═O)N(Ra)S(═O)2Re, —OC2-6alkylNRaRh, —OC2-6alkylORh, —SRh, —S(═O)Re, —S(═O)2Re, —S(═O)2NRaRh, —S(═O)2N(Ra)C(═O)Re, —S(═O)2N(Ra)C(═O)ORe, —S(═O)2N(Ra)C(═O)NRaRh, —NRaRh, —N(Ra)C(═O)Re, —N(Ra)C(═O)ORe, —N(Ra)C(═O)NRaRh, —N(Ra)C(═NRa)NRaRh, —N(Ra)S(═O)2Re, —N(Ra)S(═O)2NRaRh, —NRaC2-6alkylNRaRh, —NRaC2-6alkylORh, —C(═O)Rg, —C(═O)ORg, —C(═O)NRgRa, —C(═NRa)NRaRg, —ORg, —OC(═O)Rg, —OC(═O)NRaRg, —OC(═O)N(Ra)S(═O)2Rg, —OC2-6alkylNRaRg, —OC2-6alkylORg, —SRg, —S(═O)Rg, —S(═O)2Rg, —S(═O)2NRaRg, —S(═O)2N(Ra)C(═O)Rg, —S(═O)2N(Ra)C(═O)ORg, —S(═O)2N(Ra)C(═O)NRaRg, —NRaRg, —N(Ra)C(═O)Rg, —N(Ra)C(═O)ORg, —N(Ra)C(═O)NRaRg, —N(Ra)C(═NRa)NRaRg, —N(Ra)S(═O)2Rg, —N(Ra)S(═O)2NRaRg, —NRaC2-6alkylNRaRg or —NRaC2-6alkylORg; or R5 is a saturated, partially saturated or unsaturated 5-, 6- or 7-membered monocyclic or 6-, 7-, 8-, 9-, 10- or 11-membered bicyclic ring containing 0, 1, 2, 3 or 4 atoms selected from N, O and S, wherein the carbon atoms of the ring are substituted by 0, 1 or 2 oxo groups and the ring is substituted by 0, 1, 2, 3 or 4 substituents selected from Re, C1-4haloalkyl, halo, cyano, nitro, —C(═O)Re, —C(═O)ORe, —C(═O)NReRa, —C(═NRa)NRhRa, —ORh, —OC(═O)Re, —OC(═O)NRaRh, —OC(═O)N(Ra)S(═O)2Re, —OC2-6alkylNRaRh, —OC2-6alkylORh, —SRh, —S(═O)Re, —S(═O)2Re, —S(═O)2NRaRh, —S(═O)2N(Ra)C(═O)Re, —S(═O)2N(Ra)C(═O)ORe, —S(═O)2N(Ra)C(═O)NRaRh, —NRaRh, —N(Ra)C(═O)Re, —N(Ra)C(═O)ORe, —N(Ra)C(═O)NRaRh, —N(Ra)C(═NRa)NRaRh, —N(Ra)S(═O)2Re, —N(Ra)S(═O)2NRaRh, —NRaC2-6alkylNRaRh, —NRaC2-6alkylORh, —C(═O)Rg, —C(═O)ORg, —C(═O)NRgRa, —C(═NRa)NRaRg, —ORg, —OC(═O)Rg, —OC(═O)NRaRg, —OC(═O)N(Ra)S(═O)2Rg, —OC2-6alkylNRaRg, —OC2-6alkylORg, —SRg, —S(═O)Rg, —S(═O)2Rg, —S(═O)2NRaRg, —S(═O)2N(Ra)C(═O)Rg, —S(═O)2N(Ra)C(═O)ORg, —S(═O)2N(Ra)C(═O)NRaRg, —NRaRg, —N(Ra)C(═O)Rg, —N(Ra)C(═O)ORg, —N(Ra)C(═O)NRaRg, —N(Ra)C(═NRa)NRaRg, —N(Ra)S(═O)2Rg, —N(Ra)S(═O)2NRaRg, —NRaC2-6alkylNRaRg and —NRaC2-6alkylORg;
R5′ is H, Re, C1-4haloalkyl, halo, cyano, nitro, —C(═O)Re, —C(═O)ORe, —C(═O)NReRa, —C(═NRa)NRhRa, —ORh, —OC(═O)Re, —OC(═O)NRaRh, —OC(═O)N(Ra)S(═O)2Re, —OC2-6alkylNRaRh, —OC2-6alkylORh, —SRh, —S(═O)Re, —S(═O)2Re, —S(═O)2NRaRh, —S(═O)2N(Ra)C(═O)Re, —S(═O)2N(Ra)C(═O)ORe, —S(═O)2N(Ra)C(═O)NRaRh, —NRaRh, —N(Ra)C(═O)Re, —N(Ra)C(═O)ORe, —N(Ra)C(═O)NRaRh, —N(Ra)C(═NRa)NRaRh, —N(Ra)S(═O)2Re, —N(Ra)S(═O)2NRaRh, —NRaC2-6alkylNRaRh, —NRaC2-6alkylORh, —C(═O)Rg, —C(═O)ORg, —C(═O)NRgRa, —C(═NRa)NRaRg, —ORg, —OC(═O)Rg, —OC(═O)NRaRg, —OC(═O)N(Ra)S(═O)2Rg, —OC2-6alkylNRaRg, —OC2-6alkylORg, —SRg, —S(═O)Rg, —S(═O)2Rg, —S(═O)2NRaRg, —S(═O)2N(Ra)C(═O)Rg, —S(═O)2N(Ra)C(═O)ORg, —S(═O)2N(Ra)C(═O)NRaRg, —NRaRg, —N(Ra)C(═O)Rg, —N(Ra)C(═O)ORg, —N(Ra)C(═O)NRaRg, —N(Ra)C(═NRa)NRaRg, —N(Ra)S(═O)2Rg, —N(Ra)S(═O)2NRaRg, —NRaC2-6alkylNRaRg or —NRaC2-6alkylORg; or R5′ is a saturated, partially saturated or unsaturated 5-, 6- or 7-membered monocyclic or 6-, 7-, 8-, 9-, 10- or 11-membered bicyclic ring containing 0, 1, 2, 3 or 4 atoms selected from N, O and S, wherein the carbon atoms of the ring are substituted by 0, 1 or 2 oxo groups and the ring is substituted by 0, 1, 2, 3 or 4 substituents selected from Re, C1-4haloalkyl, halo, cyano, nitro, —C(═O)Re, —C(═O)ORe, —C(═O)NReRa, —C(═NRa)NRhRa, —ORh, —OC(═O)Re, —OC(═O)NRaRh, —OC(═O)N(Ra)S(═O)2Re, —OC2-6alkylNRaRh, —OC2-6alkylORh, —SRh, —S(═O)Re, —S(═O)2Re, —S(═O)2NRaRh, —S(═O)2N(Ra)C(═O)Re, —S(═O)2N(Ra)C(═O)ORe, —S(═O)2N(Ra)C(═O)NRaRh, —NRaRh, —N(Ra)C(═O)Re, —N(Ra)C(═O)ORe, —N(Ra)C(═O)NRaRh, —N(Ra)C(═NRa)NRaRh, —N(Ra)S(═O)2Re, —N(Ra)S(═O)2NRaRh, —NRaC2-6alkylNRaRh, —NRaC2-6alkylORh, —C(═O)Rg, —C(═O)ORg, —C(═O)NRgRa, —C(═NRa)NRaRg, —ORg, —OC(═O)Rg, —OC(═O)NRaRg, —OC(═O)N(Ra)S(═O)2Rg, —OC2-6alkylNRaRg, —OC2-6alkylORg, —SRg, —S(═O)Rg, —S(═O)2Rg, —S(═O)2NRaRg, —S(═O)2N(Ra)C(═O)Rg, —S(═O)2N(Ra)C(═O)ORg, —S(═O)2N(Ra)C(═O)NRaRg, —NRaRg, —N(Ra)C(═O)Rg, —N(Ra)C(═O)ORg, —N(Ra)C(═O)NRaRg, —N(Ra)C(═NRa)NRaRg, —N(Ra)S(═O)2Rg, —N(Ra)S(═O)2NRaRg, —NRaC2-6alkylNRaRg and —NRaC2-6alkylORg;
R6 is H, C1-4haloalkyl, halo, cyano, —C(═O)Rb, —C(═O)ORb, —C(═O)NRaRa, —C(═NRa)NRaRa, —OC2-6alkyl, —OC(═O)Rb, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —NRaRb, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —N(Ra)S(═O)2NRaRa, —NRaC2-6alkylNRaRa, —NRaC2-6alkylORa and Re;
R6′ is H, C1-4haloalkyl, halo, cyano, —C(═O)Rb, —C(═O)ORb, —C(═O)NRaRa, —C(═NRa)NRaRa, —OC2-6alkyl, —OC(═O)Rb, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —NRaRb, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —N(Ra)S(═O)2NRaRa, —NRaC2-6alkylNRaRa, —NRaC2-6alkylORa and Re; wherein at least one of R6 and R6′ is other than H;
Ra is independently, at each instance, H or Rb;
Rb is independently, at each instance, phenyl, benzyl or C1-6alkyl, the phenyl, benzyl and C1-6alkyl being substituted by 0, 1, 2 or 3 substituents selected from halo, C1-4alkyl, C1-3haloalkyl, —OC1-4alkyl, —NH2, —NHC1-4alkyl, —N(C1-4alkyl)C1-4alkyl;
Rc is independently at each instance a saturated, partially saturated or unsaturated 5-, 6- or 7-membered monocyclic or 6-, 7-, 8-, 9-, 10- or 11-membered bicyclic ring containing 1, 2, 3 or 4 atoms selected from N, O and S, wherein the carbon atoms of the ring are substituted by 0, 1 or 2 oxo groups;
Rd is independently at each instance C1-8alkyl, C1-4haloalkyl, halo, cyano, nitro, —C(═O)Rb, —C(═O)ORb, —C(═O)NRaRa, —C(═NRa)NRaRa, —ORa, —OC(═O)Rb, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —N(Ra)S(═O)2NRaRa, —NRaC2-6alkylNRaRa or —NRaC2-6alkylORb;
Re is independently at each instance C1-6alkyl substituted by 0, 1, 2 or 3 substituents independently selected from Rd and additionally substituted by 0 or 1 substituents selected from Rg;
Rg is independently at each instance a saturated, partially saturated or unsaturated 5-, 6- or 7-membered monocyclic or 6-, 7-, 8-, 9-, 10- or 11-membered bicyclic ring containing 0, 1, 2, 3 or 4 atoms selected from N, O and S, wherein the carbon atoms of the ring are substituted by 0, 1 or 2 oxo groups and the ring is substituted by 0, 1, 2 or 3 substituents selected from C1-8alkyl, C1-4haloalkyl, halo, cyano, nitro, —C(═O)Rb, —C(═O)ORb, —C(═O)NRaRa, —C(═NRa)NRaRa, —ORa, —OC(═O)Rb, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —N(Ra)S(═O)NRaRa, —NRaC2-6alkylNRaRa and —NRaC2-6alkylORa; and
Rh is independently at each instance Re or H.
In another embodiment, in conjunction with any one of the above and below embodiments, L1 is a saturated, unsaturated, or partially-saturated chain of 2 or 3 carbon atoms substituted at each open position by R2.
In another embodiment, in conjunction with any one of the above and below embodiments, L1 is a saturated, unsaturated, or partially-saturated chain of 2 carbon atoms substituted at each open position by R2.
In another embodiment, in conjunction with any one of the above and below embodiments, L2 is a saturated, unsaturated, or partially-saturated chain of 2 or 3 carbon atoms substituted at each open position by R2′.
In another embodiment, in conjunction with any one of the above and below embodiments, L2 is a saturated, unsaturated, or partially-saturated chain of 2 carbon atoms substituted at each open position by R2′.
In another embodiment, in conjunction with any one of the above and below embodiments, the combined number of carbon atoms in the L1 and L2 chains is 3.
In another embodiment, in conjunction with any one of the above and below embodiments, the combined number of carbon atoms in the L1 and L2 chains is 4.
In another embodiment, in conjunction with any one of the above and below embodiments, the combined number of carbon atoms in the L1 and L2 chains is 5.
In another embodiment, in conjunction with any one of the above and below embodiments, the group:
is selected from
In another embodiment, in conjunction with any one of the above and below embodiments, m is independently at each instance 0.
In another embodiment, in conjunction with any one of the above and below embodiments, m is independently at each instance 1 or 2.
In another embodiment, in conjunction with any one of the above and below embodiments, Q1 is N.
In another embodiment, in conjunction with any one of the above and below embodiments, Q2 is N.
In another embodiment, in conjunction with any one of the above and below embodiments, Q3 is C(R5).
In another embodiment, in conjunction with any one of the above and below embodiments, Q4 is C(R6).
In another embodiment, in conjunction with any one of the above and below embodiments, Q5 is C(R6′).
In another embodiment, in conjunction with any one of the above and below embodiments, Q6 is C(R5′).
In another embodiment, in conjunction with any one of the above and below embodiments, R1 is H.
In another embodiment, in conjunction with any one of the above and below embodiments, R1 is Rg.
In another embodiment, in conjunction with any one of the above and below embodiments, R1 is —(C(R2)(R2))—Rg.
In another embodiment, in conjunction with any one of the above and below embodiments, R1 is —(C(R2)(R2))2—Rg.
In another embodiment, in conjunction with any one of the above and below embodiments, R2 is H.
In another embodiment, in conjunction with any one of the above and below embodiments, R2′ is H.
In another embodiment, in conjunction with any one of the above and below embodiments, R4 is phenyl or naphthyl, wherein the phenyl and naphthyl are substituted by 1, 2, 3 or 4 substituents selected from Re, Re, halo, C1-4haloalkyl, cyano, nitro, —C(═O)Re, —C(═O)ORh, —C(═O)NRaRh, —C(═NRa)NRaRh, —ORh, —OC(═O)Re, —OC(═O)NRaRh, —OC(═O)N(Ra)S(═O)2Re, —OC2-6alkylNRaRh, —OC2-6alkylORh, —SRe, —S(═O)Re, —S(═O)2Re, —S(═O)2NRaRh, —S(═O)2N(Ra)C(═O)Re, —S(═O)2N(Ra)C(═O)ORh, —S(═O)2N(Ra)C(═O)NRaRh, —NRaRh, —N(Ra)C(═O)Re, —N(Ra)C(═O)ORh, —N(Ra)C(═O)NRaRh, —N(Ra)C(═NRa)NRaRh, —N(Ra)S(═O)2Re, —N(Ra)S(═O)2NRaRh, —NRaC2-6alkylNRaRh, —NRaC2-6alkylORh, —C(═O)Rg, —C(═O)ORg, —C(═O)NRaRg, —C(═NRa)NRaRg, —ORg, —OC(═O)Rg, —OC(═O)NRaRg, —OC(═O)N(Ra)S(═O)2Rg, —OC(═O)N(Rg)S(═O)2Re, —OC2-6alkylNRaRg, —OC2-6alkylORg, —SRg, —S(═O)Rg, —S(═O)2Rg, —S(═O)2NRaRg, —S(═O)2N(Rg)C(═O)Re, —S(═O)2N(Ra)C(═O)Rg, —S(═O)2N(Rg)C(═O)ORh, —S(═O)2N(Ra)C(═O)ORg, —S(═O)2N(Rg)C(═O)NRaRh, —S(═O)2N(Ra)C(═O)NRaRg, —NRaRg, —N(Rg)C(═O)Re, —N(Ra)C(═O)Rg, —N(Rg)C(═O)ORh, —N(Ra)C(═O)ORg, —N(Rg)C(═O)NRaRh, —N(Ra)C(═O)NRaRg, —N(Rg)C(═NRa)NRaRh, —N(Ra)C(═NRa)NRaRg, —N(Rg)S(═O)2Re, —N(Ra)S(═O)2Rg, —N(Rg)S(═O)2NRaRh, —N(Ra)S(═O)2NRaRg, —NRhC2-6alkylNRaRg, —NRaC2-6alkylNRaRg, —NRgC2-6alkylORh and —NRaC2-6alkylORg.
In another embodiment, in conjunction with any one of the above and below embodiments, R4 is Rc substituted by 0, 1, 2, 3 or 4 substituents selected from Rc, Re, halo, C1-4haloalkyl, cyano, nitro, —C(═O)Re, —C(═O)ORh, —C(═O)NRaRh, —C(═NRa)NRaRa, —ORh, —OC(═O)Re, —OC(═O)NRaRh, —OC(═O)N(Ra)S(═O)2Re, —OC2-6alkylNRaRh, —OC2-6alkylORh, —SRe, —S(═O)Re, —S(═O)2Re, —S(═O)2NRaRh, —S(═O)2N(Ra)C(═O)Re, —S(═O)2N(Ra)C(═O)ORh, —S(═O)2N(Ra)C(═O)NRaRh, —NRaRh, —N(Ra)C(═O)Re, —N(Ra)C(═O)ORh, —N(Ra)C(═O)NRaRh, —N(Ra)C(═NRa)NRaRh, —N(Ra)S(═O)2Re, —N(Ra)S(═O)2NRaRh, —NRaC2-6alkylNRaRh, —NRaC2-6alkylORh, —C(═O)Rg, —C(═O)ORg, —C(═O)NRaRg, —C(═NRa)NRaRg, —ORg, —OC(═O)Rg, —OC(═O)NRaRg, —OC(═O)N(Ra)S(═O)2Rg, —OC(═O)N(Rg)S(═O)2Re, —OC2-6alkylNRaRg, —OC2-6alkylORg, —SRg, —S(═O)Rg, —S(═O)2Rg, —S(═O)2NRaRg, —S(═O)2N(Rg)C(═O)Re, —S(═O)2N(Ra)C(═O)Rg, —S(═O)2N(Rg)C(═O)ORh, —S(═O)2N(Ra)C(═O)ORg, —S(═O)2N(Rg)C(═O)NRaRh, —S(═O)2N(Ra)C(═O)NRaRg, —NRaRg, —N(Rg)C(═O)Re, —N(Ra)C(═O)Rg, —N(Rg)C(═O)ORh, —N(Ra)C(═O)ORg, —N(Rg)C(═O)NRaRh, —N(Ra)C(═O)NRaRg, —N(Rg)C(═NRa)NRaRh, —N(Ra)C(═NRa)NRaRg, —N(Rg)S(═O)2Re, —N(Ra)S(═O)2Rg, —N(Rg)S(═O)2NRaRh, —N(Ra)S(═O)2NRaRg, —NRhC2-6alkylNRaRg, —NRaC2-6alkylNRaRg, —NRgC2-6alkylORh and —NRaC2-6alkylORg, wherein R4 is not imidazole or any substituted derivative thereof.
In another embodiment, in conjunction with any one of the above and below embodiments, R4 is Re substituted by 1, 2, 3 or 4 substituents selected from Rc, Re, halo, C1-4haloalkyl, cyano, nitro, —C(═O)Re, —C(═O)ORh, —C(═O)NRaRh, —C(═NRa)NRaRh, —ORh, —OC(═O)Re, —OC(═O)NRaRh, —OC(═O)N(Ra)S(═O)2Re, —OC2-6alkylNRaRh, —OC2-6alkylORh, —SRe, —S(═O)Re, —S(═O)2Re, —S(═O)2NRaRh, —S(═O)2N(Ra)C(═O)Re, —S(═O)2N(Ra)C(═O)ORh, —S(═O)2N(Ra)C(═O)NRaRh, —NRaRh, —N(Ra)C(═O)Re, —N(Ra)C(═O)ORh, —N(Ra)C(═O)NRaRh, —N(Ra)C(═NRa)NRaRh, —N(Ra)S(═O)2Re, —N(Ra)S(═O)2NRaRh, —NRaC2-6alkylNRaRh, —NRaC2-6alkylORh, —C(═O)Rg, —C(═O)ORg, —C(═O)NRaRg, —C(═NRa)NRaRg, —ORg, —OC(═O)Rg, —OC(═O)NRaRg, —OC(═O)N(Ra)S(═O)2Rg, —OC(═O)N(Rg)S(═O)2Re, —OC2-6alkylNRaRg, —OC2-6alkylORg, —SRg, —S(═O)Rg, —S(═O)2Rg, —S(═O)2NRaRg, —S(═O)2N(Rg)C(═O)Re, —S(═O)2N(Ra)C(═O)Rg, —S(═O)2N(Rg)C(═O)ORh, —S(═O)2N(Ra)C(═O)ORg, —S(═O)2N(Rg)C(═O)NRaRh, —S(═O)2N(Ra)C(═O)NRaRg, —NRaRg, —N(Rg)C(═O)Re, —N(Ra)C(═O)Rg, —N(Rg)C(═O)ORh, —N(Ra)C(═O)ORg, —N(Rg)C(═O)NRaRh, —N(Ra)C(═O)NRaRg, —N(Rg)C(═NRa)NRaRh, —N(Ra)C(═NRa)NRaRg, —N(Rg)S(═O)2Re, —N(Ra)S(═O)2Rg, —N(Rg)S(═O)2NRaRh, —N(Ra)S(═O)2NRaRg, —NRhC2-6alkylNRaRg, —NRaC2-6alkylNRaRg, —NRgC2-6alkylORh and —NRaC2-6alkylORg, wherein R4 is not imidazole or any substituted derivative thereof.
In another embodiment, in conjunction with any one of the above and below embodiments, R4 is Rc, wherein R4 is not imidazole or any substituted derivative thereof.
In another embodiment, in conjunction with any one of the above and below embodiments, R4 is a ring selected from thiophene, pyrrole, 1,3-oxazole, 1,3-thiazole, 1,3,4-oxadiazole, 1,3,4-thiadiazole, 1,2,3-oxadiazole, 1,2,3-thiadiazole, 1H-1,2,3-triazole, isothiazole, 1,2,4-oxadiazole, 1,2,4-thiadiazole, 1,2,3,4-oxatriazole, 1,2,3,4-thiatriazole, 1H-1,2,3,4-tetraazole, 1,2,3,5-oxatriazole, 1,2,3,5-thiatriazole, furan, imidazol-1-yl, imidazol-4-yl, 1,2,4-triazol-4-yl, 1,2,4-triazol-5-yl, isoxazol-3-yl, isoxazol-5-yl, thiolane, pyrrolidine, tetrahydrofuran, 4,5-dihydrothiophene, 2-pyrroline, 4,5-dihydrofuran, pyridazine, pyrimidine, pyrazine, 1,2,3-triazine, 1,2,4-triazine, 1,2,4-triazine, 1,3,5-triazine, pyridine, 2H-3,4,5,6-tetrahydropyran, thiane, 1,2-diazaperhydroine, 1,3-diazaperhydroine, piperazine, 1,3-oxazaperhydroine, morpholine, 1,3-thiazaperhydroine, 1,4-thiazaperhydroine, piperidine, 2H-3,4-dihydropyran, 2,3-dihydro-4H-thiin, 1,4,5,6-tetrahydropyridine, 2H-5,6-dihydropyran, 2,3-dihydro-6H-thiin, 1,2,5,6-tetrahydropyridine, 3,4,5,6-tetrahydropyridine, 4H-pyran, 4H-thiin, 1,4-dihydropyridine, 1,4-dithiane, 1,4-dioxane, 1,4-oxathiane, 1,2-oxazolidine, 1,2-thiazolidine, pyrazolidine, 1,3-oxazolidine, 1,3-thiazolidine, imidazolidine, 1,2,4-oxadiazolidine, 1,3,4-oxadiazolidine, 1,2,4-thiadiazolidine, 1,3,4-thiadiazolidine, 1,2,4-triazolidine, 2-imidazoline, 3-imidazoline, 2-pyrazoline, 4-imidazoline, 2,3-dihydroisothiazole, 4,5-dihydroisoxazole, 4,5-dihydroisothiazole, 2,5-dihydroisoxazole, 2,5-dihydroisothiazole, 2,3-dihydroisoxazole, 4,5-dihydrooxazole, 2,3-dihydrooxazole, 2,5-dihydrooxazole, 4,5-dihydrothiazole, 2,3-dihydrothiazole, 2,5-dihydrothiazole, 1,3,4-oxathiazolidine, 1,4,2-oxathiazolidine, 2,3-dihydro-1H-[1,2,3]triazole, 2,5-dihydro-1H-[1,2,3]triazole, 4,5-dihydro-1H-[1,2,3]triazole, 2,3-dihydro-1H-[1,2,4]triazole, 4,5-dihydro-1H-[1,2,4]triazole, 2,3-dihydro-[1,2,4]oxadiazole, 2,5-dihydro-[1,2,4]oxadiazole, 4,5-dihydro-[1,2,4]thiadiazole, 2,3-dihydro-[1,2,4]thidiazole, 2,5-dihydro-[1,2,4]thiadiazole, 4,5-dihydro-[1,2,4]thiadiazole, 2,5-dihydro-[1,2,4]oxadiazole, 2,3-dihydro-[1,2,4]oxadiazole, 4,5-dihydro-[1,2,4]oxadiazole, 2,5-dihydro-[1,2,4]thiadiazole, 2,3-dihydro-[1,2,4]thiadiazole, 4,5-dihydro-[1,2,4]thiadiazole, 2,3-dihydro-[1,3,4]oxadiazole, 2,3-dihydro-[1,3,4]thiadiazole, [1,4,2]oxathiazole, [1,3,4]oxathiazole, 1,3,5-triazaperhydroine, 1,2,4-triazaperhydroine, 1,4,2-dithiazaperhydroine, 1,4,2-dioxazaperhydroine, 1,3,5-oxadiazaperhydroine, 1,2,5-oxadiazaperhydroine, 1,3,4-thiadiazaperhydroine, 1,3,5-thiadiazaperhydroine, 1,2,5-thiadiazaperhydroine, 1,3,4-oxadiazaperhydroine, 1,4,3-oxathiazaperhydroine, 1,4,2-oxathiazaperhydroine, 1,4,5,6-tetrahydropyridazine, 1,2,3,4-tetrahydropyridazine, 1,2,3,6-tetrahydropyridazine, 1,2,5,6-tetrahydropyrimidine, 1,2,3,4-tetrahydropyrimidine, 1,4,5,6-tetrahydropyrimidine, 1,2,3,6-tetrahydropyrazine, 1,2,3,4-tetrahydropyrazine, 5,6-dihydro-4H-[1,2]oxazine, 5,6-dihydro-2H-[1,2]oxazine, 3,6-dihydro-2H-[1,2]oxazine, 3,4-dihydro-2H-[1,2]oxazine, 5,6-dihydro-4H-[1,2]thiazine, 5,6-dihydro-2H-[1,2]thiazine, 3,6-dihydro-2H-[1,2]thiazine, 3,4-dihydro-2H-[1,2]thiazine, 5,6-dihydro-2H-[1,3]oxazine, 5,6-dihydro-4H-[1,3]oxazine, 3,6-dihydro-2H-[1,3]oxazine, 3,4-dihydro-2H-[1,3]oxazine, 3,6-dihydro-2H-[1,4]oxazine, 3,4-dihydro-2H-[1,4]oxazine, 5,6-dihydro-2H-[1,3]thiazine, 5,6-dihydro-4H-[1,3]thiazine, 3,6-dihydro-2H-[1,3]thiazine, 3,4-dihydro-2H-[1,3]thiazine, 3,6-dihydro-2H-[1,4]thiazine, 3,4-dihydro-2H-[1,4]thiazine, 1,2,3,6-tetrahydro-[1,2,4]triazine, 1,2,3,4-tetrahydro-[1,2,4]triazine, 1,2,3,4-tetrahydro-[1,3,5]triazine, 2,3,4,5-tetrahydro-[1,2,4]triazine, 1,4,5,6-tetrahydro-[1,2,4]triazine, 5,6-dihydro-[1,4,2]dioxazine, 5,6-dihydro-[1,4,2]dioxazine, 5,6-dihydro-[1,4,2]dithiazine, 2,3-dihydro-[1,4,2]dioxazine, 3,4-dihydro-2H-[1,3,4]oxadiazine, 3,6-dihydro-2H-[1,3,4]oxadiazine, 3,4-dihydro-2H-[1,3,5]oxadiazine, 3,6-dihydro-2H-[1,3,5]oxadiazine, 5,6-dihydro-2H-[1,2,5]oxadiazine, 5,6-dihydro-4H-[1,2,5]oxadiazine, 3,4-dihydro-2H-[1,3,4]thiadiazine, 3,6-dihydro-2H-[1,3,4]thiadiazine, 3,4-dihydro-2H-[1,3,5]thiadiazine, 3,6-dihydro-2H-[1,3,5]thiadiazine, 5,6-dihydro-2H-[1,2,5]thiadiazine, 5,6-dihydro-4H-[1,2,5]thiadiazine, 5,6-dihydro-2H-[1,2,3]oxadiazine, 3,6-dihydro-2H-[1,2,5]oxadiazine, 5,6-dihydro-4H-[1,3,4]oxadiazine, 3,4-dihydro-2H-[1,2,5]oxadiazine, 5,6-dihydro-2H-[1,2,3]thiadiazine, 3,6-dihydro-2H-[1,2,5]thiadiazine, 5,6-dihydro-4H-[1,3,4]thiadiazine, 3,4-dihydro-2H-[1,2,5]thiadiazine, 5,6-dihydro-[1,4,3]oxathiazine, 5,6-dihydro-[1,4,2]oxathiazine, 2,3-dihydro-[1,4,3]oxathiazine, 2,3-dihydro-[1,4,2]oxathiazine, 4,5-dihydropyridine, 1,6-dihydropyridine, 5,6-dihydropyridine, 2H-pyran, 2H-thiin, 3,6-dihydropyridine, 2,3-dihydropyridazine, 2,5-dihydropyridazine, 4,5-dihydropyridazine, 1,2-dihydropyridazine, 2,3-dihydropyrimidine, 2,5-dihydropyrimidine, 5,6-dihydropyrimidine, 3,6-dihydropyrimidine, 4,5-dihydropyrazine, 5,6-dihydropyrazine, 3,6-dihydropyrazine, 4,5-dihydropyrazine, 1,4-dihydropyrazine, 1,4-dithiin, 1,4-dioxin, 2H-1,2-oxazine, 6H-1,2-oxazine, 4H-1,2-oxazine, 2H-1,3-oxazine, 4H-1,3-oxazine, 6H-1,3-oxazine, 2H-1,4-oxazine, 4H-1,4-oxazine, 2H-1,3-thiazine, 2H-1,4-thiazine, 4H-1,2-thiazine, 6H-1,3-thiazine, 4H-1,4-thiazine, 2H-1,2-thiazine, 6H-1,2-thiazine, 1,4-oxathiin, 2H,5H-1,2,3-triazine, 1H,4H-1,2,3-triazine, 4,5-dihydro-1,2,3-triazine, 1H,6H-1,2,3-triazine, 1,2-dihydro-1,2,3-triazine, 2,3-dihydro-1,2,4-triazine, 3H,6H-1,2,4-triazine, 1H,6H-1,2,4-triazine, 3,4-dihydro-1,2,4-triazine, 1H,4H-1,2,4-triazine, 5,6-dihydro-1,2,4-triazine, 4,5-dihydro-1,2,4-triazine, 2H,5H-1,2,4-triazine, 1,2-dihydro-1,2,4-triazine, 1H,4H-1,3,5-triazine, 1,2-dihydro-1,3,5-triazine, 1,4,2-dithiazine, 1,4,2-dioxazine, 2H-1,3,4-oxadiazine, 2H-1,3,5-oxadiazine, 6H-1,2,5-oxadiazine, 4H-1,3,4-oxadiazine, 4H-1,3,5-oxadiazine, 4H-1,2,5-oxadiazine, 2H-1,3,5-thiadiazine, 6H-1,2,5-thiadiazine, 4H-1,3,4-thiadiazine, 4H-1,3,5-thiadiazine, 4H-1,2,5-thiadiazine, 2H-1,3,4-thiadiazine, 6H-1,3,4-thiadiazine, 6H-1,3,4-oxadiazine, 1,4,2-oxathiazine and any bicyclic derivative of any of the above rings containing a vicinally-fused phenyl, pyridine or pyrimidine, wherein the carbon atoms of the ring and bicyclic derivative are substituted by 0, 1 or 2 oxo or thioxo groups; wherein the ring or bicyclic derivative there of is substituted by 0, 1, 2, 3 or 4 substituents selected from Rc, Re, halo, C1-4haloalkyl, cyano, nitro, —C(═O)Re, —C(═O)ORh, —C(═O)NRaRh, —C(═NRa)NRaRh, —ORh, —OC(═O)Re, —OC(═O)NRaRh, —OC(═O)N(Ra)S(═O)2Re, —OC2-6alkylNRaRh, —OC2-6alkylORh, —SRe, —S(═O)Re, —S(═O)2Re, —S(═O)2NRaRh, —S(═O)2N(Ra)C(═O)Re, —S(═O)2N(Ra)C(═O)ORh, —S(═O)2N(Ra)C(═O)NRaRe, —NRaRh, —N(Ra)C(═O)Re, —N(Ra)C(═O)ORh, —N(Ra)C(═O)NRaRh, —N(Ra)C(═NRa)NRaRh, —N(Ra)S(═O)2Re, —N(Ra)S(═O)2NRaRh, —NRaC2-6alkylNRaRh, —NRaC2-6alkylORh, —C(═O)Rg, —C(═O)ORg, —C(═O)NRaRg, —C(═NRa)NRaRg, —ORg, —OC(═O)Rg, —OC(═O)NRaRg, —OC(═O)N(Ra)S(═O)2Rg, —OC(═O)N(Rg)S(═O)2Re, —OC2-6alkylNRaRg, —OC2-6alkylORg, —SRg, —S(═O)Rg, —S(═O)2Rg, —S(═O)2NRaRg, —S(═O)2N(Rg)C(═O)Re, —S(═O)2N(Ra)C(═O)Rg, —S(═O)2N(Rg)C(═O)ORh, —S(═O)2N(Ra)C(═O)ORg, —S(═O)2N(Rg)C(═O)NRaRh, —S(═O)2N(Ra)C(═O)NRaRg, —NRaRg, —N(Rg)C(═O)Re, —N(Ra)C(═O)Rg, —N(Rg)C(═O)ORh, —N(Ra)C(═O)ORg, —N(Rg)C(═O)NRaRh, —N(Ra)C(═O)NRaRg, —N(Rg)C(═NRa)NRaRh, —N(Ra)C(═NRa)NRaRg, —N(Rg)S(═O)2Re, —N(Ra)S(═O)2Rg, —N(Rg)S(═O)2NRaRh, —N(Ra)S(═O)2NRaRg, —NRhC2-6alkylNRaRg, —NRaC2-6alkylNRaRg, —NRgC2-6alkylORh and —NRaC2-6alkylORg.
In another embodiment, in conjunction with any one of the above and below embodiments, R5 is H.
In another embodiment, in conjunction with any one of the above and below embodiments, R5 is Re, C1-4haloalkyl, halo, cyano, —C(═O)Re, —C(═O)ORe, —C(═O)NReRa, —C(═NRa)NRhRa, —ORh, —OC(═O)Re, —OC(═O)NRaRh, —OC(═O)N(Ra)S(═O)2Re, —OC2-6alkylNRaRh, —OC2-6alkylORh, —SRh, —S(═O)Re, —S(═O)2Re, —S(═O)2NRaRh, —S(═O)2N(Ra)C(═O)Re, —S(═O)2N(Ra)C(═O)O Re, —S(═O)2N(Ra)C(═O)NRaRh, —NRaRh, —N(Ra)C(═O)Re, —N(Ra)C(═O)ORe, —N(Ra)C(═O)NRaRh, —N(Ra)C(═NRa)NRaRh, —N(Ra)S(═O)2Re, —N(Ra)S(═O)2NRaRh, —NRaC2-6alkylNRaRh, —NRaC2-6alkylORh, —C(═O)Rg, —C(═O)ORg, —C(═O)NRgRa, —C(═NRa)NRaRg, —ORg, —OC(═O)Rg, —OC(═O)NRaRg, —OC(═O)N(Ra)S(═O)2Rg, —OC2-6alkylNRaRg, —OC2-6alkylORg, —SRg, —S(═O)Rg, —S(═O)2Rg, —S(═O)2NRaRg, —S(═O)2N(Ra)C(═O)Rg, —S(═O)2N(Ra)C(═O)ORg, —S(═O)2N(Ra)C(═O)NRaRg, —NRaRg, —N(Ra)C(═O)Rg, —N(Ra)C(═O)ORg, —N(Ra)C(═O)NRaRg, —N(Ra)C(═NRa)NRaRg, —N(Ra)S(═O)2Rg, —N(Ra)S(═O)2NRaRg, —NRaC2-6alkylNRaRg or —NRaC2-6alkylORg; or R5 is a saturated, partially saturated or unsaturated 5-, 6- or 7-membered monocyclic or 6-, 7-, 8-, 9-, 10- or 11-membered bicyclic ring containing 0, 1, 2, 3 or 4 atoms selected from N, O and S, wherein the carbon atoms of the ring are substituted by 0, 1 or 2 oxo groups and the ring is substituted by 0, 1, 2, 3 or 4 substituents selected from Re, C1-4haloalkyl, halo, cyano, nitro, —C(═O)Re, —C(═O)ORe, —C(═O)NReRa, —C(═NRa)NRhRa, —ORh, —OC(═O)Re, —OC(═O)NRaRh, —OC(═O)N(Ra)S(═O)2Re, —OC2-6alkylNRaRh, —OC2-6alkylORh, —SRh, —S(═O)Re, —S(═O)2Re, —S(═O)2NRaRh, —S(═O)2N(Ra)C(═O)Re, —S(═O)2N(Ra)C(═O)ORe, —S(═O)2N(Ra)C(═O)NRaRh, —NRaRh, —N(Ra)C(═O)Re, —N(Ra)C(═O)ORe, —N(Ra)C(═O)NRaRh, —N(Ra)C(═NRa)NRaRh, —N(Ra)S(═O)2Re, —N(Ra)S(═O)2NRaRh, —NRaC2-6alkylNRaRh, —NRaC2-6alkylORh, —C(═O)Rg, —C(═O)ORg, —C(═O)NRgRa, —C(═NRa)NRaRg, —ORg, —OC(═O)Rg, —OC(═O)NRaRg, —OC(═O)N(Ra)S(═O)2Rg, —OC2-6alkylNRaRg, —OC2-6alkylORg, —SRg, —S(═O)Rg, —S(═O)2Rg, —S(═O)2NRaRg, —S(═O)2N(Ra)C(═O)Rg, —S(═O)2N(Ra)C(═O)ORg, —S(═O)2N(Ra)C(═O)NRaRg, —NRaRg, —N(Ra)C(═O)Rg, —N(Ra)C(═O)ORg, —N(Ra)C(═O)NRaRg, —N(Ra)C(═NRa)NRaRg, —N(Ra)S(═O)2Rg, —N(Ra)S(═O)2NRaRg, —NRaC2-6alkylNRaRg and —NRaC2-6alkylORg.
In another embodiment, in conjunction with any one of the above and below embodiments, R5 is Re.
In another embodiment, in conjunction with any one of the above and below embodiments, R5 is halo, cyano, —C(═O)Re, —C(═O)ORe, —C(═O)NReRa, —C(═NRa)NRhRa, —ORh, —OC(═O)Re, —OC(═O)NRaRh, —OC(═O)N(Ra)S(═O)2Re, —OC2-6alkylNRaRh, —OC2-6alkylORh, —SRh, —S(═O)Re, —S(═O)2Re, —S(═O)2NRaRh, —S(═O)2N(Ra)C(═O)Re, —S(═O)2N(Ra)C(═O)ORe, —S(═O)2N(Ra)C(═O)NRaRh, —NRaRh, —N(Ra)C(═O)Re, —N(Ra)C(═O)ORe, —N(Ra)C(═O)NRaRh, —N(Ra)C(═NRa)NRaRh, —N(Ra)S(═O)2Re, —N(Ra)S(═O)2NRaRh, —NRaC2-6alkylNRaRh, —NRaC2-6alkylORh, —C(═O)Rg, —C(═O)ORg, —C(═O)NRgRa, —C(═NRa)NRaRg, —ORg, —OC(═O)Rg, —OC(═O)NRaRg, —OC(═O)N(Ra)S(═O)2Rg, —OC2-6alkylNRaRg, —OC2-6alkylORg, —SRg, —S(═O)Rg, —S(═O)2Rg, —S(═O)2NRaRg, —S(═O)2N(Ra)C(═O)Rg, —S(═O)2N(Ra)C(═O)ORg, —S(═O)2N(Ra)C(═O)NRaRg, —NRaRg, —N(Ra)C(═O)Rg, —N(Ra)C(═O)ORg, —N(Ra)C(═O)NRaRg, —N(Ra)C(═NRa)NRaRg, —N(Ra)S(═O)2Rg, —N(Ra)S(═O)2NRaRg, —NRaC2-6alkylNRaRg or —NRaC2-6alkylORg.
In another embodiment, in conjunction with any one of the above and below embodiments, R5 is a saturated, partially saturated or unsaturated 5-, 6- or 7-membered monocyclic or 6-, 7-, 8-, 9-, 10- or 11-membered bicyclic ring containing 0, 1, 2, 3 or 4 atoms selected from N, O and S, wherein the carbon atoms of the ring are substituted by 0, 1 or 2 oxo groups and the ring is substituted by 0, 1, 2, 3 or 4 substituents selected from Re, C1-4haloalkyl, halo, cyano, nitro, —C(═O)Re, —C(═O)ORe, —C(═O)NReRa, —C(═NRa)NRhRa, —ORh, —OC(═O)Re, —OC(═O)NRaRh, —OC(═O)N(Ra)S(═O)2Re, —OC2-6alkylNRaRh, —OC2-6alkylORh, —SRh, —S(═O)Re, —S(═O)2Re, —S(═O)2NRaRh, —S(═O)2N(Ra)C(═O)Re, —S(═O)2N(Ra)C(═O)ORe, —S(═O)2N(Ra)C(═O)NRaRh, —NRaRh, —N(Ra)C(═O)Re, —N(Ra)C(═O)ORe, —N(Ra)C(═O)NRaRh, —N(Ra)C(═NRa)NRaRh, —N(Ra)S(═O)2Re, —N(Ra)S(═O)2NRaRh, —NRaC2-6alkylNRaRh, —NRaC2-6alkylORh, —C(═O)Rg, —C(═O)ORg, —C(═O)NRgRa, —C(═NRa)NRaRg, —ORg, —OC(═O)Rg, —OC(═O)NRaRg, —OC(═O)N(Ra)S(═O)2Rg, —OC2-6alkylNRaRg, —OC2-6alkylORg, —SRg, —S(═O)Rg, —S(═O)2Rg, —S(═O)2NRaRg, —S(═O)2N(Ra)C(═O)Rg, —S(═O)2N(Ra)C(═O)ORg, —S(═O)2N(Ra)C(═O)NRaRg, —NRaRg, —N(Ra)C(═O)Rg, —N(Ra)C(═O)ORg, —N(Ra)C(═O)NRaRg, —N(Ra)C(═NRa)NRaRg, —N(Ra)S(═O)2Rg, —N(Ra)S(═O)2NRaRg, —NRaC2-6alkylNRaRg and —NRaC2-6alkylORg.
In another embodiment, in conjunction with any one of the above and below embodiments, R5′ is H.
In another embodiment, in conjunction with any one of the above and below embodiments, R5′ is Re, C1-4haloalkyl, halo, cyano, —C(═O)Re, —C(═O)ORe, —C(═O)NReRa, —C(═NRa)NRhRa, —ORh, —OC(═O)Re, —OC(═O)NRaRh, —OC(═O)N(Ra)S(═O)2Re, —OC2-6alkylNRaRh, —OC2-6alkylORh, —SRh, —S(═O)Re, —S(═O)2Re, —S(═O)2NRaRh, —S(═O)2N(Ra)C(═O)Re, —S(═O)2N(Ra)C(═O)ORe, —S(═O)2N(Ra)C(═O)NRaRh, —NRaRh, —N(Ra)C(═O)Re, —N(Ra)C(═O)ORe, —N(Ra)C(═O)NRaRh, —N(Ra)C(═NRa)NRaRh, —N(Ra)S(═O)2Re, —N(Ra)S(═O)2NRaRh, —NRaC2-6alkylNRaRh, —NRaC2-6alkylORh, —C(═O)Rg, —C(═O)ORg, —C(═O)NRgRa, —C(═NRa)NRaRg, —ORg, —OC(═O)Rg, —OC(═O)NRaRg, —OC(═O)N(Ra)S(═O)2Rg, —OC2-6alkylNRaRg, —OC2-6alkylORg, —SRg, —S(═O)Rg, —S(═O)2Rg, —S(═O)2NRaRg, —S(═O)2N(Ra)C(═O)Rg, —S(═O)2N(Ra)C(═O)ORg, —S(═O)2N(Ra)C(═O)NRaRg, —NRaRg, —N(Ra)C(═O)Rg, —N(Ra)C(═O)ORg, —N(Ra)C(═O)NRaRg, —N(Ra)C(═NRa)NRaRg, —N(Ra)S(═O)2Rg, —N(Ra)S(═O)2NRaRg, —NRaC2-6alkylNRaRg or —NRaC2-6alkylORg; or R5′ is a saturated, partially saturated or unsaturated 5-, 6- or 7-membered monocyclic or 6-, 7-, 8-, 9-, 10- or 11-membered bicyclic ring containing 0, 1, 2, 3 or 4 atoms selected from N, O and S, wherein the carbon atoms of the ring are substituted by 0, 1 or 2 oxo groups and the ring is substituted by 0, 1, 2, 3 or 4 substituents selected from Re, C1-4haloalkyl, halo, cyano, nitro, —C(═O)Re, —C(═O)ORe, —C(═O)NReRa, —C(═NRa)NRhRa, —ORh, —OC(═O)Re, —OC(═O)NRaRh, —OC(═O)N(Ra)S(═O)2Re, —OC2-6alkylNRaRh, —OC2-6alkylORh, —SRh, —S(═O)Re, —S(═O)2Re, —S(═O)2NRaRh, —S(═O)2N(Ra)C(═O)Re, —S(═O)2N(Ra)C(═O)ORe, —S(═O)2N(Ra)C(═O)NRaRh, —NRaRh, —N(Ra)C(═O)Re, —N(Ra)C(═O)ORe, —N(Ra)C(═O)NRaRh, —N(Ra)C(═NRa)NRaRh, —N(Ra)S(═O)2Re, —N(Ra)S(═O)2NRaRh, —NRaC2-6alkylNRaRh, —NRaC2-6alkylORh, —C(═O)Rg, —C(═O)ORg, —C(═O)NRgRa, —C(═NRa)NRaRg, —ORg, —OC(═O)Rg, —OC(═O)NRaRg, —OC(═O)N(Ra)S(═O)2Rg, —OC2-6alkylNRaRg, —OC2-6alkylORg, —SRg, —S(═O)Rg, —S(═O)2Rg, —S(═O)2NRaRg, —S(═O)2N(Ra)C(═O)Rg, —S(═O)2N(Ra)C(═O)ORg, —S(═O)2N(Ra)C(═O)NRaRg, —NRaRg, —N(Ra)C(═O)Rg, —N(Ra)C(═O)ORg, —N(Ra)C(═O)NRaRg, —N(Ra)C(═NRa)NRaRg, —N(Ra)S(═O)2Rg, —N(Ra)S(═O)2NRaRg, —NRaC2-6alkylNRaRg and —NRaC2-6alkylORg.
In another embodiment, in conjunction with any one of the above and below embodiments, R5′ is Re or C1-4haloalkyl.
In another embodiment, in conjunction with any one of the above and below embodiments, R5′ is halo, cyano, —C(═O)Re, —C(═O)ORe, —C(═O)NReRa, —C(═NRa)NReRa, —ORh, —OC(═O)Re, —OC(═O)NRaRh, —OC(═O)N(Ra)S(═O)2Re, —OC2-6alkylNRaRh, —OC2-6alkylORh, —SRh, —S(═O)Re, —S(═O)2Re, —S(═O)2NRaRh, —S(═O)2N(Ra)C(═O)Re, —S(═O)2N(Ra)C(═O)ORe, —S(═O)2N(Ra)C(═O)NRaRh, —NRaRh, —N(Ra)C(═O)Re, —N(Ra)C(═O)ORe, —N(Ra)C(═O)NRaRh, —N(Ra)C(═NRa)NRaRh, —N(Ra)S(═O)2Re, —N(Ra)S(═O)2NRaRh, —NRaC2-6alkylNRaRh, —NRaC2-6alkylORh, —C(═O)Rg, —C(═O)ORg, —C(═O)NRgRa, —C(═NRa)NRaRg, —ORg, —OC(═O)Rg, —OC(═O)NRaRg, —OC(═O)N(Ra)S(═O)2Rg, —OC2-6alkylNRaRg, —OC2-6alkylORg, —SRg, —S(═O)Rg, —S(═O)2Rg, —S(═O)2NRaRg, —S(═O)2N(Ra)C(═O)Rg, —S(═O)2N(Ra)C(═O)ORg, —S(═O)2N(Ra)C(═O)NRaRg, —NRaRg, —N(Ra)C(═O)Rg, —N(Ra)C(═O)ORg, —N(Ra)C(═O)NRaRg, —N(Ra)C(═NRa)NRaRg, —N(Ra)S(═O)2Rg, —N(Ra)S(═O)2NRaRg, —NRaC2-6alkylNRaRg or —NRaC2-6alkylORg.
In another embodiment, in conjunction with any one of the above and below embodiments, R5′ is a saturated, partially saturated or unsaturated 5-, 6- or 7-membered monocyclic or 6-, 7-, 8-, 9-, 10- or 11-membered bicyclic ring containing 0, 1, 2, 3 or 4 atoms selected from N, O and S, wherein the carbon atoms of the ring are substituted by 0, 1 or 2 oxo groups and the ring is substituted by 0, 1, 2, 3 or 4 substituents selected from Re, C1-4haloalkyl, halo, cyano, nitro, —C(═O)Re, —C(═O)ORe, —C(═O)NReRa, —C(═NRa)NRhRa, —ORh, —OC(═O)Re, —OC(═O)NRaRh, —OC(═O)N(Ra)S(═O)2Re, —OC2-6alkylNRaRh, —OC2-6alkylORh, —SRh, —S(═O)Re, —S(═O)2Re, —S(═O)2NRaRh, —S(═O)2N(Ra)C(═O)Re, —S(═O)2N(Ra)C(═O)ORe, —S(═O)2N(Ra)C(═O)NRaRh, —NRaRh, —N(Ra)C(═O)Re, —N(Ra)C(═O)ORe, —N(Ra)C(═O)NRaRh, —N(Ra)C(═NRa)NRaRh, —N(Ra)S(═O)2Re, —N(Ra)S(═O)2NRaRh, —NRaC2-6alkylNRaRh, —NRaC2-6alkylORh, —C(═O)Rg, —C(═O)ORg, —C(═O)NRgRa, —C(═NRa)NRaRg, —ORg, —OC(═O)Rg, —OC(═O)NRaRg, —OC(═O)N(Ra)S(═O)2Rg, —OC2-6alkylNRaRg, —OC2-6alkylORg, —SRg, —S(═O)Rg, —S(═O)2Rg, —S(═O)2NRaRg, —S(═O)2N(Ra)C(═O)Rg, —S(═O)2N(Ra)C(═O)ORg, —S(═O)2N(Ra)C(═O)NRaRg, —NRaRg, —N(Ra)C(═O)Rg, —N(Ra)C(═O)ORg, —N(Ra)C(═O)NRaRg, —N(Ra)C(═NRa)NRaRg, —N(Ra)S(═O)2Rg, —N(Ra)S(═O)2NRaRg, —NRaC2-6alkylNRaRg and —NRaC2-6alkylORg.
In another embodiment, in conjunction with any one of the above and below embodiments, R6 is H.
In another embodiment, in conjunction with any one of the above and below embodiments, R6 is C1-4haloalkyl, halo, cyano, —C(═O)Rb, —C(═O)ORb, —C(═O)NRaRa, —C(═NRa)NRaRa, —OH, —OC2-6alkyl, —OC(═O)Rb, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —NRaRb, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —N(Ra)S(═O)2NRaRa, —NRaC2-6alkylNRaRa, —NRaC2-6alkylORa and Re.
In another embodiment, in conjunction with any one of the above and below embodiments, R6 is Re or C1-4haloalkyl.
In another embodiment, in conjunction with any one of the above and below embodiments, R6 is Re.
In another embodiment, in conjunction with any one of the above and below embodiments, R6′ is H.
In another embodiment, in conjunction with any one of the above and below embodiments, R6′ is C1-4haloalkyl, halo, cyano, —C(═O)Rb, —C(═O)ORb, —C(═O)NRaRa, —C(═NRa)NRaRa, —OH, —OC2-6alkyl, —OC(═O)Rb, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —NRaRb, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —N(Ra)S(═O)2NRaRa, —NRaC2-6alkylNRaRa, —NRaC2-6alkylORa and Re.
In another embodiment, in conjunction with any one of the above and below embodiments, R6′ is Re or C1-4haloalkyl.
In another embodiment, in conjunction with any one of the above and below embodiments, R6′ is Re.
In another embodiment, in conjunction with any one of the above and below embodiments, Rb is independently, at each instance, phenyl, benzyl or C1-6alkyl, the phenyl, benzyl and C1-6alkyl being substituted by 0, 1, 2 or 3 substituents selected from halo, C1-4alkyl, C1-3haloalkyl, —OC1-4alkyl, —NH2, —NHC1-4alkyl, —N(C1-4alkyl)C1-4alkyl.
In another embodiment, in conjunction with any one of the above and below embodiments, Rb is independently, at each instance, C1-6alkyl substituted by 0, 1, 2 or 3 substituents selected from halo, C1-4alkyl, C1-3haloalkyl, —OC1-4alkyl, —NH2, —NHC1-4alkyl, —N(C1-4alkyl)C1-4alkyl.
In another embodiment, in conjunction with any one of the above and below embodiments, Rb is independently, at each instance, C1-6alkyl substituted by 1, 2 or 3 substituents selected from halo, C1-4alkyl, C1-3haloalkyl, —OC1-4alkyl, —NH2, —NHC1-4alkyl, —N(C1-4alkyl)C1-4alkyl.
In another embodiment, in conjunction with any one of the above and below embodiments, Rb is independently, at each instance, C1-6alkyl.
In another embodiment, in conjunction with any one of the above and below embodiments, Rc is independently, at each instance, a ring selected from thiophene, pyrrole, 1,3-oxazole, 1,3-thiazole, 1,3,4-oxadiazole, 1,3,4-thiadiazole, 1,2,3-oxadiazole, 1,2,3-thiadiazole, 1H-1,2,3-triazole, isothiazole, 1,2,4-oxadiazole, 1,2,4-thiadiazole, 1,2,3,4-oxatriazole, 1,2,3,4-thiatriazole, 1H-1,2,3,4-tetraazole, 1,2,3,5-oxatriazole, 1,2,3,5-thiatriazole, furan, 1,2,4-triazol-4-yl, 1,2,4-triazol-5-yl, isoxazol-3-yl, isoxazol-5-yl, thiolane, pyrrolidine, tetrahydrofuran, 4,5-dihydrothiophene, 2-pyrroline, 4,5-dihydrofuran, pyridazine, pyrimidine, pyrazine, 1,2,3-triazine, 1,2,4-triazine, 1,2,4-triazine, 1,3,5-triazine, pyridine, 2H-3,4,5,6-tetrahydropyran, thiane, 1,2-diazaperhydroine, 1,3-diazaperhydroine, piperazine, 1,3-oxazaperhydroine, morpholine, 1,3-thiazaperhydroine, 1,4-thiazaperhydroine, piperidine, 2H-3,4-dihydropyran, 2,3-dihydro-4H-thiin, 1,4,5,6-tetrahydropyridine, 2H-5,6-dihydropyran, 2,3-dihydro-6H-thiin, 1,2,5,6-tetrahydropyridine, 3,4,5,6-tetrahydropyridine, 4H-pyran, 4H-thiin, 1,4-dihydropyridine, 1,4-dithiane, 1,4-dioxane, 1,4-oxathiane, 1,2-oxazolidine, 1,2-thiazolidine, pyrazolidine, 1,3-oxazolidine, 1,3-thiazolidine, imidazolidine, 1,2,4-oxadiazolidine, 1,3,4-oxadiazolidine, 1,2,4-thiadiazolidine, 1,3,4-thiadiazolidine, 1,2,4-triazolidine, 2-imidazoline, 3-imidazoline, 2-pyrazoline, 4-imidazoline, 2,3-dihydroisothiazole, 4,5-dihydroisoxazole, 4,5-dihydroisothiazole, 2,5-dihydroisoxazole, 2,5-dihydroisothiazole, 2,3-dihydroisoxazole, 4,5-dihydrooxazole, 2,3-dihydrooxazole, 2,5-dihydrooxazole, 4,5-dihydrothiazole, 2,3-dihydrothiazole, 2,5-dihydrothiazole, 1,3,4-oxathiazolidine, 1,4,2-oxathiazolidine, 2,3-dihydro-1H-[1,2,3]triazole, 2,5-dihydro-1H-[1,2,3]triazole, 4,5-dihydro-1H-[1,2,3]triazole, 2,3-dihydro-1H-[1,2,4]triazole, 4,5-dihydro-1H-[1,2,4]triazole, 2,3-dihydro-[1,2,4]oxadiazole, 2,5-dihydro-[1,2,4]oxadiazole, 4,5-dihydro-[1,2,4]thiadiazole, 2,3-dihydro-[1,2,4]thidiazole, 2,5-dihydro-[1,2,4]thiadiazole, 4,5-dihydro-[1,2,4]thiadiazole, 2,5-dihydro-[1,2,4]oxadiazole, 2,3-dihydro-[1,2,4]oxadiazole, 4,5-dihydro-[1,2,4]oxadiazole, 2,5-dihydro-[1,2,4]thiadiazole, 2,3-dihydro-[1,2,4]thiadiazole, 4,5-dihydro-[1,2,4]thiadiazole, 2,3-dihydro-[1,3,4]oxadiazole, 2,3-dihydro-[1,3,4]thiadiazole, [1,4,2]oxathiazole, [1,3,4]oxathiazole, 1,3,5-triazaperhydroine, 1,2,4-triazaperhydroine, 1,4,2-dithiazaperhydroine, 1,4,2-dioxazaperhydroine, 1,3,5-oxadiazaperhydroine, 1,2,5-oxadiazaperhydroine, 1,3,4-thiadiazaperhydroine, 1,3,5-thiadiazaperhydroine, 1,2,5-thiadiazaperhydroine, 1,3,4-oxadiazaperhydroine, 1,4,3-oxathiazaperhydroine, 1,4,2-oxathiazaperhydroine, 1,4,5,6-tetrahydropyridazine, 1,2,3,4-tetrahydropyridazine, 1,2,3,6-tetrahydropyridazine, 1,2,5,6-tetrahydropyrimidine, 1,2,3,4-tetrahydropyrimidine, 1,4,5,6-tetrahydropyrimidine, 1,2,3,6-tetrahydropyrazine, 1,2,3,4-tetrahydropyrazine, 5,6-dihydro-4H-[1,2]oxazine, 5,6-dihydro-2H-[1,2]oxazine, 3,6-dihydro-2H-[1,2]oxazine, 3,4-dihydro-2H-[1,2]oxazine, 5,6-dihydro-4H-[1,2]thiazine, 5,6-dihydro-2H-[1,2]thiazine, 3,6-dihydro-2H-[1,2]thiazine, 3,4-dihydro-2H-[1,2]thiazine, 5,6-dihydro-2H-[1,3]oxazine, 5,6-dihydro-4H-[1,3]oxazine, 3,6-dihydro-2H-[1,3]oxazine, 3,4-dihydro-2H-[1,3]oxazine, 3,6-dihydro-2H-[1,4]oxazine, 3,4-dihydro-2H-[1,4]oxazine, 5,6-dihydro-2H-[1,3]thiazine, 5,6-dihydro-4H-[1,3]thiazine, 3,6-dihydro-2H-[1,3]thiazine, 3,4-dihydro-2H-[1,3]thiazine, 3,6-dihydro-2H-[1,4]thiazine, 3,4-dihydro-2H-[1,4]thiazine, 1,2,3,6-tetrahydro-[1,2,4]triazine, 1,2,3,4-tetrahydro-[1,2,4]triazine, 1,2,3,4-tetrahydro-[1,3,5]triazine, 2,3,4,5-tetrahydro-[1,2,4]triazine, 1,4,5,6-tetrahydro-[1,2,4]triazine, 5,6-dihydro-[1,4,2]dioxazine, 5,6-dihydro-[1,4,2]dioxazine, 5,6-dihydro-[1,4,2]dithiazine, 2,3-dihydro-[1,4,2]dioxazine, 3,4-dihydro-2H-[1,3,4]oxadiazine, 3,6-dihydro-2H-[1,3,4]oxadiazine, 3,4-dihydro-2H-[1,3,5]oxadiazine, 3,6-dihydro-2H-[1,3,5]oxadiazine, 5,6-dihydro-2H-[1,2,5]oxadiazine, 5,6-dihydro-4H-[1,2,5]oxadiazine, 3,4-dihydro-2H-[1,3,4]thiadiazine, 3,6-dihydro-2H-[1,3,4]thiadiazine, 3,4-dihydro-2H-[1,3,5]thiadiazine, 3,6-dihydro-2H-[1,3,5]thiadiazine, 5,6-dihydro-2H-[1,2,5]thiadiazine, 5,6-dihydro-4H-[1,2,5]thiadiazine, 5,6-dihydro-2H-[1,2,3]oxadiazine, 3,6-dihydro-2H-[1,2,5]oxadiazine, 5,6-dihydro-4H-[1,3,4]oxadiazine, 3,4-dihydro-2H-[1,2,5]oxadiazine, 5,6-dihydro-2H-[1,2,3]thiadiazine, 3,6-dihydro-2H-[1,2,5]thiadiazine, 5,6-dihydro-4H-[1,3,4]thiadiazine, 3,4-dihydro-2H-[1,2,5]thiadiazine, 5,6-dihydro-[1,4,3]oxathiazine, 5,6-dihydro-[1,4,2]oxathiazine, 2,3-dihydro-[1,4,3]oxathiazine, 2,3-dihydro-[1,4,2]oxathiazine, 4,5-dihydropyridine, 1,6-dihydropyridine, 5,6-dihydropyridine, 2H-pyran, 2H-thiin, 3,6-dihydropyridine, 2,3-dihydropyridazine, 2,5-dihydropyridazine, 4,5-dihydropyridazine, 1,2-dihydropyridazine, 2,3-dihydropyrimidine, 2,5-dihydropyrimidine, 5,6-dihydropyrimidine, 3,6-dihydropyrimidine, 4,5-dihydropyrazine, 5,6-dihydropyrazine, 3,6-dihydropyrazine, 4,5-dihydropyrazine, 1,4-dihydropyrazine, 1,4-dithiin, 1,4-dioxin, 2H-1,2-oxazine, 6H-1,2-oxazine, 4H-1,2-oxazine, 2H-1,3-oxazine, 4H-1,3-oxazine, 6H-1,3-oxazine, 2H-1,4-oxazine, 4H-1,4-oxazine, 2H-1,3-thiazine, 2H-1,4-thiazine, 4H-1,2-thiazine, 6H-1,3-thiazine, 4H-1,4-thiazine, 2H-1,2-thiazine, 6H-1,2-thiazine, 1,4-oxathiin, 2H,5H-1,2,3-triazine, 1H,4H-1,2,3-triazine, 4,5-dihydro-1,2,3-triazine, 1H,6H-1,2,3-triazine, 1,2-dihydro-1,2,3-triazine, 2,3-dihydro-1,2,4-triazine, 3H,6H-1,2,4-triazine, 1H,6H-1,2,4-triazine, 3,4-dihydro-1,2,4-triazine, 1H,4H-1,2,4-triazine, 5,6-dihydro-1,2,4-triazine, 4,5-dihydro-1,2,4-triazine, 2H,5H-1,2,4-triazine, 1,2-dihydro-1,2,4-triazine, 1H,4H-1,3,5-triazine, 1,2-dihydro-1,3,5-triazine, 1,4,2-dithiazine, 1,4,2-dioxazine, 2H-1,3,4-oxadiazine, 2H-1,3,5-oxadiazine, 6H-1,2,5-oxadiazine, 4H-1,3,4-oxadiazine, 4H-1,3,5-oxadiazine, 4H-1,2,5-oxadiazine, 2H-1,3,5-thiadiazine, 6H-1,2,5-thiadiazine, 4H-1,3,4-thiadiazine, 4H-1,3,5-thiadiazine, 4H-1,2,5-thiadiazine, 2H-1,3,4-thiadiazine, 6H-1,3,4-thiadiazine, 6H-1,3,4-oxadiazine, 1,4,2-oxathiazine and any bicyclic derivative of any of the above rings containing a vicinally-fused phenyl, pyridine or pyrimidine, wherein the carbon atoms of the ring and bicyclic derivative are substituted by 0, 1 or 2 oxo or thioxo groups.
In another embodiment, in conjunction with any one of the above and below embodiments, Re is independently at each instance C1-6alkyl substituted by 1, 2 or 3 substituents independently selected from Rd and additionally substituted by 0 or 1 substituents selected from Rg.
In another embodiment, in conjunction with any one of the above and below embodiments, Re is independently at each instance C1-6alkyl substituted by 0, 1, 2 or 3 substituents independently selected from Rd and additionally substituted by 1 substituent selected from Rg.
In another embodiment, in conjunction with any one of the above and below embodiments, Re is independently at each instance C1-6alkyl.
In another embodiment, in conjunction with any one of the above and below embodiments, Rg is independently at each instance a saturated, partially saturated or unsaturated 5-, 6- or 7-membered monocyclic or 6-, 7-, 8-, 9-, 10- or 11-membered bicyclic ring containing 0, 1, 2, 3 or 4 atoms selected from N, O and S, wherein the carbon atoms of the ring are substituted by 0, 1 or 2 oxo groups and the ring is substituted by 0, 1, 2 or 3 substituents selected from C1-8alkyl, C1-4haloalkyl, halo, cyano, nitro, —C(═O)Rb, —C(═O)ORb, —C(═O)NRaRa, —C(═NRa)NRaRa, —ORa, —OC(═O)Rb, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —N(Ra)S(═O)2NRaRa, —NRaC2-6alkylNRaRa and —NRaC2-6alkylORa.
In another embodiment, in conjunction with any one of the above and below embodiments, Rg is independently at each instance a saturated, partially saturated or unsaturated 5-, 6- or 7-membered monocyclic or 6-, 7-, 8-, 9-, 10- or 11-membered bicyclic ring containing 0, 1, 2, 3 or 4 atoms selected from N, O and S, wherein the carbon atoms of the ring are substituted by 0, 1 or 2 oxo groups and the ring is substituted by 1, 2 or 3 substituents selected from C1-8alkyl, C1-4haloalkyl, halo, cyano, nitro, —C(═O)Rb, —C(═O)ORb, —C(═O)NRaRa, —C(═NRa)NRaRa, —ORa, —OC(═O)Rb, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —N(Ra)S(═O)2NRaRa, —NRaC2-6alkylNRaRa and —NRaC2-6alkylORa.
In another embodiment, in conjunction with any one of the above and below embodiments, Rg is independently at each instance a saturated, partially saturated or unsaturated 5-, 6- or 7-membered monocyclic or 6-, 7-, 8-, 9-, 10- or 11-membered bicyclic ring containing 1, 2, 3 or 4 atoms selected from N, O and S, wherein the carbon atoms of the ring are substituted by 0, 1 or 2 oxo groups and the ring is substituted by 0, 1, 2 or 3 substituents selected from C1-8alkyl, C1-4haloalkyl, halo, cyano, nitro, —C(═O)Rb, —C(═O)ORb, —C(═O)NRaRa, —C(═NRa)NRaRa, —ORa, —OC(═O)Rb, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —N(Ra)S(═O)NRaRa, —NRaC2-6alkylNRaRa and —NRaC2-6alkylORa.
In another embodiment, in conjunction with any one of the above and below embodiments, Rg is phenyl substituted by 0, 1, 2 or 3 substituents selected from C1-8alkyl, C1-4haloalkyl, halo, cyano, nitro, —C(═O)Rb, —C(═O)ORb, —C(═O)NRaRa, —C(═NRa)NRaRa, —ORa, —OC(═O)Rb, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —N(Ra)S(═O)2NRaRa, —NRaC2-6alkylNRaRa and —NRaC2-6alkylORa.
In another embodiment, in conjunction with any one of the above and below embodiments, Rg is phenyl substituted by 1, 2 or 3 substituents selected from C1-8alkyl, C1-4haloalkyl, halo, cyano, nitro, —C(═O)Rb, —C(═O)ORb, —C(═O)NRaRa, —C(═NRa)NRaRa, —ORa, —OC(═O)Rb, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —N(Ra)S(═O)2NRaRa, —NRaC2-6alkylNRaRa and —NRaC2-6alkylORa.
Another embodiment of the invention involves a compound having the structure:
or any pharmaceutically-acceptable salt thereof, wherein:
n is 1, 2 or 3 and o is 1, 2 or 3; wherein n+o=4 or 5 and when n is 1 and Q1 and Q2 are both N, then both R2 groups together are oxo, and when o is 1 and Q1 and Q2 are both N, then both R2′ groups together are oxo;
m is independently at each instance 0, 1 or 2;
Q1 is N or C(R2);
Q2 is N or C(R2); wherein at least one of Q1 and Q2 is N;
Q3 is N or C(R25);
Q4 is N or C(R6);
Q5 is N or C(R6);
Q6 is N or C(R5);
—R1 is H or (C(R2)(R2))m—Rg;
R2 is, independently, in each instance, H, C1-8alkyl, C1-4haloalkyl, —O(C1-7alkyl), —N(C1-7alkyl)Ra, or a C1-6alkyl substituted by 1, 2 or 3 substituents selected from halo, cyano, —ORa, —OC(═O)Rb, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —NRaC2-6alkylNRaRa and —NRaC2-6alkylORa; wherein any two geminal R2 groups may additionally be oxo;
R2′ is, independently, in each instance, H, C1-8alkyl, C1-4haloalkyl, —O(C1-7alkyl), —N(C1-7alkyl)Ra, or a C1-6alkyl substituted by 1, 2 or 3 substituents selected from halo, cyano, —ORa, —OC(═O)Rb, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —NRaC2-6alkylNRaRa and —NRaC2-6alkylORa; wherein any two geminal R2′ groups may additionally be oxo;
R3 is, independently, in each instance, H, C1-8alkyl, C1-4haloalkyl, —O(C1-7alkyl), —N(C1-7alkyl)Ra, or a C1-6alkyl substituted by 0, 1, 2 or 3 substituents selected from halo, cyano, —ORa, —OC(═O)Rb, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —(Ra)S(═O)2Rb, —NRaC2-6alkylNRaRa and —NRaC2-6alkylORa; wherein any two geminal R3 groups may additionally be oxo;
R4 is phenyl or naphthyl, wherein the phenyl and naphthyl are substituted by 1, 2, 3 or 4 substituents selected from C1-8alkyl, C1-4haloalkyl, halo, cyano, nitro, —C(═O)Rb, —C(═O)ORb, —C(═O)NRaRa, —C(═NRa)NRaRa, —ORa, —C(═O)Rb, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —N(Ra)S(═O)2NRaRa, —NRaC2-6alkylNRaRa, —NRaC2-6alkylORa and Re; or R4 is Rc substituted by 0, 1, 2, 3 or 4 substituents selected from C1-8alkyl, C1-4haloalkyl, halo, cyano, nitro, —C(═O)Rb, —C(═O)ORb, —C(═O)NRaRa, —C(═NRa)NRaRa, —ORa, —OC(═O)Rb, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —N(Ra)S(═O)NRaRa, —NRaC2-6alkylNRaRa, —NRaC2-6alkylORa and Re;
R5 is independently, at each instance, H, C1-8alkyl, C1-4haloalkyl, halo, cyano, —C(═O)Rb, —C(═O)ORb, —C(═O)NRbRa, —C(═NRa)NRaRa, —ORa, —OC(═O)Rb, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —N(Ra)S(═O)NRaRa, —NRaC2-6alkylNRaRa, —NRaC2-6alkylORa, C1-3alkylRc, C1-3alkylRf and Re; or R5 is a saturated, partially saturated or unsaturated 5-, 6- or 7-membered monocyclic or 6-, 7-, 8-, 9-, 10- or 11-membered bicyclic ring containing 0, 1, 2, 3 or 4 atoms selected from N, O and S, wherein the carbon atoms of the ring are substituted by 0, 1 or 2 oxo groups and the ring is substituted by 0, 1, 2, 3 or 4 substituents selected from C1-8alkyl, C1-4haloalkyl, halo, cyano, nitro, —C(═O)Rb, —C(═O)ORb, —C(═O)NRaRa, —C(═NRa)NRaRa, —ORa, —OC(═O)Rb, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —N(Ra)S(═O)2NRaRa, —NRaC2-6alkylNRaRa, —NRaC2-6alkylORa and Re;
R6 is independently, at each instance, H, C1-8alkyl, C1-4haloalkyl, halo, cyano, —C(═O)Rb, —C(═O)ORb, —C(═O)NRaRa, —C(═NRa)NRaRa, —OH, —OC2-6alkyl, —OC(═O)Rb, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —NRaRb, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —N(Ra)S(═O)2NRaRa, —NRaC2-6alkylNRaRa, —NRaC2-6alkylORa and Ra;
Ra is independently, at each instance, H or Rb;
Rb is independently, at each instance, phenyl, benzyl or C1-6alkyl, the phenyl, benzyl and C1-6alkyl being substituted by 0, 1, 2 or 3 substituents selected from halo, C1-4alkyl, C1-3haloalkyl, —OC1-4alkyl, —NH2, —NHC1-4alkyl, —N(C1-4alkyl)C1-4alkyl;
Rc is independently at each instance a saturated, partially saturated or unsaturated 5-, 6- or 7-membered monocyclic or 6-, 7-, 8-, 9-, 10- or 11-membered bicyclic ring containing 1, 2, 3 or 4 atoms selected from N, O and S, wherein the carbon atoms of the ring are substituted by 0, 1 or 2 oxo groups;
Rd is independently at each instance C1-8alkyl, C1-4haloalkyl, halo, cyano, nitro, —C(═O)Rb, —C(═O)ORb, —C(═O)NRaRa, —C(═NRa)NRaRa, —ORa, —C(═O)Rb, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —N(Ra)S(═O)2NRaRa, —NRaC2-6alkylNRaRa or —NRaC2-6alkylORa;
Re is independently at each instance C1-6alkyl substituted by 1, 2 or 3 substituents independently selected from Rd;
Rf is independently at each instance Rc substituted by 1, 2 or 3 substituents independently selected from Rd; and
Rg is independently at each instance a saturated, partially saturated or unsaturated 5-, 6- or 7-membered monocyclic or 6-, 7-, 8-, 9-, 10- or 11-membered bicyclic ring containing 0, 1, 2, 3 or 4 atoms selected from N, O and S, wherein the carbon atoms of the ring are substituted by 0, 1 or 2 oxo groups and the ring is substituted by 0, 1, 2 or 3 substituents selected from C1-8alkyl, C1-4haloalkyl, halo, cyano, nitro, —C(═O)Rb, —C(═O)ORb, —C(═O)NRaRa, —C(═NRa)NRaRa, —ORa, —OC(═O)Rb, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —N(Ra)S(═O)2NRaRa, —NRaC2-6alkylNRaRa and —NRaC2-6alkylORa.
Another embodiment of the invention involves a compound having the structure:
or any pharmaceutically-acceptable salt thereof, wherein:
n is 2 or 3;
m is independently at each instance 0, 1 or 2;
Q1 is N or C(R2);
Q2 is N or C(R2); wherein at least one of Q1 and Q2 is N;
Q3 is N or C(R5);
Q4 is N or C(R6);
Q5 is N or C(R6);
Q6 is N or C(R5);
R1 is H or (C(R2)(R2))m—Rg;
R2 is, independently, in each instance, H, C1-8alkyl, C1-4haloalkyl, —O(C1-7alkyl), —N(C1-7alkyl)Ra, or a C1-6alkyl substituted by 1, 2 or 3 substituents selected from halo, cyano, —ORa, —OC(═O)Rb, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —NRaC2-6alkylNRaRa and —NRaC2-6alkylORa; wherein any two geminal R2 groups may additionally be oxo;
R3 is, independently, in each instance, H, C1-8alkyl, C1-4haloalkyl, —O(C1-7alkyl), —N(C1-7alkyl)Ra, or a C1-6alkyl substituted by 0, 1, 2 or 3 substituents selected from halo, cyano, —ORa, —OC(═O)Rb, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —NRaC2-6alkylNRaRa and —NRaC2-6alkylORa; wherein any two geminal R3 groups may additionally be oxo;
R4 is phenyl or naphthyl, wherein the phenyl and naphthyl are substituted by 1, 2, 3 or 4 substituents selected from C1-8alkyl, C1-4haloalkyl, halo, cyano, nitro, —C(═O)Rb, —C(═O)ORb, —C(═O)NRaRa, —C(═NRa)NRaRa, —ORa, —C(═O)Rb, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —N(Ra)S(═O)2NRaRa, —NRaC2-6alkylNRaRa, —NRaC2-6alkylORa and Re; or R4 is Rc substituted by 0, 1, 2, 3 or 4 substituents selected from C1-8alkyl, C1-4haloalkyl, halo, cyano, nitro, —C(═O)Rb, —C(═O)ORb, —C(═O)NRaRa, —C(═NRa)NRaRa, —ORa, —OC(═O)Rb, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —N(Ra)S(═O)2NRaRa, —NRaC2-6alkylNRaRa, —NRaC2-6alkylORa and Re;
R5 is independently, at each instance, H, C1-8alkyl, C1-4haloalkyl, halo, cyano, —C(═O)Rb, —C(═O)ORb, —C(═O)NRbRa, —C(═NRa)NRaRa, —ORa, —OC(═O)Rb, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —N(Ra)S(═O)2NRaRa, —NRaC2-6alkylNRaRa, —NRaC2-6alkylORa, C1-3alkylRc, C1-3alkylRf and Re; or R5 is a saturated, partially saturated or unsaturated 5-, 6- or 7-membered monocyclic or 6-, 7-, 8-, 9-, 10- or 11-membered bicyclic ring containing 0, 1, 2, 3 or 4 atoms selected from N, O and S, wherein the carbon atoms of the ring are substituted by 0, 1 or 2 oxo groups and the ring is substituted by 0, 1, 2, 3 or 4 substituents selected from C1-8alkyl, C1-4haloalkyl, halo, cyano, nitro, —C(═O)Rb, —C(═O)ORb, —C(═O)NRaRa, —C(═NRa)NRaRa, —ORa, —OC(═O)Rb, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —N(Ra)S(═O)2NRaRa, —NRaC2-6alkylNRaRa, —NRaC2-6alkylORa and Re;
R6 is independently, at each instance, H, C1-8alkyl, C1-4haloalkyl, halo, cyano, —C(═O)Rb, —C(═O)ORb, —C(═O)NRaRa, —C(═NRa)NRaRa, —OH, —OC2-6alkyl, —OC(═O)Rb, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —NRaRb, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —N(Ra)S(═O)NRaRa, —NRaC2-6alkylNRaRa, —NRaC2-6alkylORa and Re;
Ra is independently, at each instance, H or Rb;
Rb is independently, at each instance, phenyl, benzyl or C1-6alkyl, the phenyl, benzyl and C1-6alkyl being substituted by 0, 1, 2 or 3 substituents selected from halo, C1-4alkyl, C1-3haloalkyl, —OC1-4alkyl, —NH2, —NHC1-4alkyl, —N(C1-4alkyl)C1-4alkyl;
Rc is independently at each instance a saturated, partially saturated or unsaturated 5-, 6- or 7-membered monocyclic or 6-, 7-, 8-, 9-, 10- or 11-membered bicyclic ring containing 1, 2, 3 or 4 atoms selected from N, O and S, wherein the carbon atoms of the ring are substituted by 0, 1 or 2 oxo groups;
Rd is independently at each instance C1-8alkyl, C1-4haloalkyl, halo, cyano, nitro, —C(═O)Rb, —C(═O)ORb, —C(═O)NRaRa, —C(═NRa)NRaRa, —ORa, —OC(═O)Rb, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —N(Ra)S(═O)2NRaRa, —NRaC2-6alkylNRaRa or —NRaC2-6alkylORa;
Re is independently at each instance C1-6alkyl substituted by 1, 2 or 3 substituents independently selected from Rd;
Rf is independently at each instance Re substituted by 1, 2 or 3 substituents independently selected from Rd; and
Rg is independently at each instance a saturated, partially saturated or unsaturated 5-, 6- or 7-membered monocyclic or 6-, 7-, 8-, 9-, 10- or 11-membered bicyclic ring containing 0, 1, 2, 3 or 4 atoms selected from N, O and S, wherein the carbon atoms of the ring are substituted by 0, 1 or 2 oxo groups and the ring is substituted by 0, 1, 2 or 3 substituents selected from C1-8alkyl, C1-4haloalkyl, halo, cyano, nitro, —C(═O)Rb, —C(═O)ORb, —C(═O)NRaRa, —C(═NRa)NRaRa, —ORa, —OC(═O)Rb, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —N(Ra)S(═O)NRaRa, —NRaC2-6alkylNRaRa and —NRaC2-6alkylORa.
In another embodiment, in conjunction with any one of the above and below embodiments, Q1 is N.
In another embodiment, in conjunction with any one of the above and below embodiments, Q2 is N.
In another embodiment, in conjunction with any one of the above and below embodiments, Q1 is N, and Q2 is N.
In another embodiment, in conjunction with any one of the above and below embodiments, Q3 is C(R5); Q4 is C(R6); Q5 is C(R6); and Q6 is C(R5).
In another embodiment, in conjunction with any one of the above and below embodiments, any one of Q3, Q4, Q5 and Q6 is N.
In another embodiment, in conjunction with any one of the above and below embodiments, Q3 is N; Q4 is C(R6); Q5 is C(R6); and Q6 is C(R5).
In another embodiment, in conjunction with any one of the above and below embodiments, Q3 is C(R5); Q4 is N; Q5 is C(R6); and Q6 is C(R5)
In another embodiment, in conjunction with any one of the above and below embodiments, Q3 is C(R5); Q4 is C(R6); Q5 is N; and Q6 is C(R5).
In another embodiment, in conjunction with any one of the above and below embodiments, Q3 is C(R25); Q4 is C(R6); Q5 is C(R6); and Q6 is N.
In another embodiment, in conjunction with any one of the above and below embodiments, Q3 is N; Q4 is N; Q5 is C(R6); and Q6 is C(R5).
In another embodiment, in conjunction with any one of the above and below embodiments, Q3 is N; Q4 is C(R6); Q5 is N; and Q6 is C(R5).
In another embodiment, in conjunction with any one of the above and below embodiments, Q3 is N; Q4 is C(R6); Q5 is C(R6); and Q6 is N.
In another embodiment, in conjunction with any one of the above and below embodiments, Q3 is C(R5); Q4 is N; Q5 is N; and Q6 is C(R5).
In another embodiment, in conjunction with any one of the above and below embodiments, Q3 is C(R5); Q4 is C(R6); Q5 is N; and Q6 is N.
In another embodiment, in conjunction with any one of the above and below embodiments, Q3 is C(R5); Q4 is N; Q5 is C(R6); and Q6 is N.
In another embodiment, in conjunction with any one of the above and below embodiments, any two of Q3, Q4, Q5 and Q6 are N.
In another embodiment, in conjunction with any one of the above and below embodiments, R1 is H.
In another embodiment, in conjunction with any one of the above and below embodiments, R1 is —(C(R2)(R2))m—Rg.
In another embodiment, in conjunction with any one of the above and below embodiments, Rg is independently at each instance an unsaturated 5-, 6- or 7-membered monocyclic ring containing 1, 2, 3 or 4 atoms selected from N, O and S, wherein the carbon atoms of the ring are substituted by 0, 1 or 2 oxo groups and the ring is substituted by 0, 1, 2 or 3 substituents selected from C1-8alkyl, C1-4haloalkyl, halo, cyano, nitro, —C(═O)Rb, —C(═O)ORb, —C(═O)NRaRa, —C(═NRa)NRaRa, —ORa, —OC(═O)Rb, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —N(Ra)S(═O)NRaRa, —NRaC2-6alkylNRaRa and —NRaC2-6alkylORa.
In another embodiment, in conjunction with any one of the above and below embodiments, Rg is independently at each instance naphthyl or phenyl substituted by 0, 1, 2 or 3 substituents selected from C1-8alkyl, C1-4haloalkyl, halo, cyano, nitro, —C(═O)Rb, —C(═O)ORb, —C(═O)NRaRa, —C(═NRa)NRaRa, —ORa, —OC(═O)Rb, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —N(Ra)S(═O)NRaRa, —NRaC2-6alkylNRaRa and —NRaC2-6alkylORa.
In another embodiment, in conjunction with any one of the above and below embodiments, R2 is, in each instance, H.
In another embodiment, in conjunction with any one of the above and below embodiments, at least one R2 group is selected from C1-8alkyl, C1-4haloalkyl, —O(C1-7alkyl), —N(C1-7alkyl)Ra, oxo and C1-6alkyl substituted by 0, 1, 2 or 3 substituents selected from halo, cyano, —ORa, —OC(═O)Rb, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —NRaC2-6alkylNRaRa and —NRaC2-6alkylORa.
In another embodiment, in conjunction with any one of the above and below embodiments, at least one R2 group is C1-8alkyl or C1-4haloalkyl.
In another embodiment, in conjunction with any one of the above and below embodiments, one R2 group is selected from C1-8alkyl and C1-4haloalkyl, wherein the remaining R2 groups are H.
In another embodiment, in conjunction with any one of the above and below embodiments, two geminal R2 or R2′ groups are oxo.
In another embodiment, in conjunction with any one of the above and below embodiments, R3 is, in each instance, H.
In another embodiment, in conjunction with any one of the above and below embodiments, at least one R3 group is selected from C1-8alkyl, C1-4haloalkyl, —O(C1-7alkyl), —N(C1-7alkyl)Ra, oxo and C1-6alkyl substituted by 0, 1, 2 or 3 substituents selected from halo, cyano, —ORa, —OC(═O)Rb, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —NRaC2-6alkylNRaRa and —NRaC2-6alkylORa.
In another embodiment, in conjunction with any one of the above and below embodiments, at least one R3 group is selected from C1-8alkyl and C1-4haloalkyl.
In another embodiment, in conjunction with any one of the above and below embodiments, one R3 group is selected from C1-8alkyl and C1-4haloalkyl, wherein the remaining R3 groups are H.
In another embodiment, in conjunction with any one of the above and below embodiments, two geminal R3 groups are oxo.
In another embodiment, in conjunction with any one of the above and below embodiments, R4 is phenyl or naphthyl, wherein the phenyl and naphthyl are substituted by 1, 2, 3 or 4 substituents selected from C1-8alkyl, C1-4haloalkyl, halo, cyano, nitro, —C(═O)Rb, —C(═O)ORb, —C(═O)NRaRa, —C(═NRa)NRaRa, —ORa, —OC(═O)Rb, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —N(Ra)S(═O)2NRaRa, —NRaC2-6alkylNRaRa, —NRaC2-6alkylORa and Re.
In another embodiment, in conjunction with any one of the above and below embodiments, R4 is phenyl substituted by 1, 2, 3 or 4 substituents selected from C1-8alkyl, C1-4haloalkyl, halo, cyano, nitro, —C(═O)Rb, —C(═O)ORb, —C(═O)NRaRa, —C(═NRa)NRaRa, —ORa, —OC(═O)Rb, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —N(Ra)S(═O)2NRaRa, —NRaC2-6alkylNRaRa, —NRaC2-6alkylORa and Re.
In another embodiment, in conjunction with any one of the above and below embodiments, R4 is phenyl substituted by 1, 2 or 3 substituents selected from C1-4haloalkyl and halo.
In another embodiment, in conjunction with any one of the above and below embodiments, R4 is 2,4-dichlorophenyl, 2,6-dichlorophenyl, 2-bromophenyl, 2-chloro-4-trifluoromethylphenyl, 2-chloro-6-trifluoromethylphenyl, 2-chlorophenyl, 2-fluorophenyl, 2-methylphenyl, 2-trifluoromethyl-4-chlorophenyl, 2-trifluoromethyl-6-chlorophenyl, 2-trifluoromethylphenyl, 3,4-dichlorophenyl, 3-chloro-4-trifluoromethylphenyl or 3-trifluoromethyl-4-chlorophenyl.
In another embodiment, in conjunction with any one of the above and below embodiments, R4 is Rc substituted by 0, 1, 2, 3 or 4 substituents selected from C1-8alkyl, C1-4haloalkyl, halo, cyano, nitro, —C(═O)Rb, —C(═O)ORb, —C(═O)NRaRa, —C(═NRa)NRaRa, —ORa, —OC(═O)Rb, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —N(Ra)S(═O)2NRaRa, —NRaC2-6alkylNRaRa, —NRaC2-6alkylORa and Re; wherein R4 is not imidazol-5-yl or 4-C1-8alkylimidazol-5-yl.
In another embodiment, in conjunction with any one of the above and below embodiments, R4 is an unsaturated 5-, 6- or 7-membered monocyclic or 6-, 7-, 8-, 9-, 10- or 11-membered bicyclic ring containing 1, 2, 3 or 4 atoms selected from N, O and S, wherein the carbon atoms of the ring are substituted by 0, 1 or 2 oxo groups and the rings are substituted by 0, 1, 2, 3 or 4 substituents selected from C1-8alkyl, C1-4haloalkyl, halo, cyano, nitro, —C(═O)Rb, —C(═O)ORb, —C(═O)NRaRa, —C(═NRa)NRaRa, —ORa, —OC(═O)Rb, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SR3, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —N(Ra)S(═O)2NRaRa, —NRaC2-6alkylNRaRa, —NRaC2-6alkylORa and Re; wherein R4 is not imidazol-5-yl or 4-C1-8alkylimidazol-5-yl.
In another embodiment, in conjunction with any one of the above and below embodiments, R4 is an unsaturated 6- or 7-membered monocyclic or 6-, 7-, 8-, 9-, 10- or 11-membered bicyclic ring containing 1, 2, 3 or 4 atoms selected from N, O and S, wherein the carbon atoms of the ring are substituted by 0, 1 or 2 oxo groups and the rings are substituted by 0, 1, 2, 3 or 4 substituents selected from C1-8alkyl, C1-4haloalkyl, halo, cyano, nitro, —C(═O)Rb, —C(═O)ORb, —C(═O)NRaRa, —C(═NRa)NRaRa, —ORa, —OC(═O)Rb, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —(Ra)S(═O)2Rb, —N(Ra)S(═O)2NRaRa, —NRaC2-6alkylNRaRa, —NRaC2-6alkylORa and Re.
In another embodiment, in conjunction with any one of the above and below embodiments, R4 is an unsaturated 6-membered monocyclic ring containing 1, 2 or 3 atoms selected from N, O and S, wherein the carbon atoms of the ring are substituted by 0, 1 or 2 oxo groups and the rings are substituted by 0, 1, 2, 3 or 4 substituents selected from C1-8alkyl, C1-4haloalkyl, halo, cyano, nitro, —C(═O)Rb, —C(═O)ORb, —C(═O)NRaRa, —C(═NRa)NRaRa, —ORa, —OC(═O)Rb, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —N(Ra)S(═O)2NRaRa, —NRaC2-6alkylNRaRa, —NRaC2-6alkylORa and Re.
In another embodiment, in conjunction with any one of the above and below embodiments, R4 is an unsaturated 6-membered monocyclic ring containing 1 or 2 N atoms and the rings are substituted by 1, 2, 3 or 4 substituents selected from C1-8alkyl, C1-4haloalkyl, halo, —ORa, —NRaRa.
In another embodiment, in conjunction with any one of the above and below embodiments, R4 is pyridine or pyrimidine, wherein the pyridine or pyrimidine by substituted by 1, 2, 3 or 4 substituents selected from C1-8alkyl, C1-4haloalkyl, halo, cyano, nitro, —C(═O)Rb, —C(═O)ORb, —C(═O)NRaRa, —C(═NRa)NRaRa, —ORa, —OC(═O)Rb, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —N(Ra)S(═O)2NRaRa, —NRaC2-6alkylNRaRa, —NRaC2-6alkylORa and Re.
In another embodiment, in conjunction with any one of the above and below embodiments, R4 is an unsaturated 5-membered monocyclic ring containing 1, 2 or 3 atoms selected from N, O and S, but no more than one N, wherein the carbon atoms of the ring are substituted by 0, 1 or 2 oxo groups and the rings are substituted by 0, 1, 2, 3 or 4 substituents selected from C1-8alkyl, C1-4haloalkyl, halo, cyano, nitro, —C(═O)Rb, —C(═O)ORb, —C(═O)NRaRa, —C(═NRa)NRaRa, —ORa, —OC(═O)Rb, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —N(Ra)S(═O)NRaRa, —NRaC2-6alkylNRaRa, —NRaC2-6alkylORa and Re.
In another embodiment, in conjunction with any one of the above and below embodiments, R4 is a saturated, partially saturated or unsaturated 6-, 7-, 8-, 9-, 10- or 11-membered bicyclic ring containing 1, 2, 3 or 4 atoms selected from N, O and S, wherein the carbon atoms of the ring are substituted by 0, 1 or 2 oxo groups and the rings are substituted by 0, 1, 2, 3 or 4 substituents selected from C1-8alkyl, C1-4haloalkyl, halo, cyano, nitro, —C(═O)Rb, —C(═O)ORb, —C(═O)NRaRa, —C(═NRa)NRaRa, —ORa, —OC(═O)Rb, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —N(Ra)S(═O)NRaRa, —NRaC2-6alkylNRaRa, —NRaC2-6alkylORa and Re.
In another embodiment, in conjunction with any one of the above and below embodiments, R4 is a saturated, partially saturated or unsaturated 9- or 10-membered bicyclic ring containing 1, 2, 3 or 4 N atoms, wherein the rings are substituted by 0, 1, 2, 3 or 4 substituents selected from C1-8alkyl, C1-4haloalkyl, halo, cyano, nitro, —C(═O)Rb, —C(═O)ORb, —C(═O)NRaRa, —C(═NRa)NRaRa, —ORa, —OC(═O)Rb, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —N(Ra)S(═O)NRaRa, —NRaC2-6alkylNRaRa, —NRaC2-6alkylORa and Re.
In another embodiment, in conjunction with any one of the above and below embodiments, R5 is independently, at each instance, H, C1-8alkyl, C1-4haloalkyl, halo, cyano, —C(═O)Rb, —C(═NRa)NRaRa, —ORa, —OC(═O)Rb, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —N(Ra)S(═O)2NRaRa, —NRaC2-6alkylNRaRa, —NRaC2-6alkylORa, C1-3alkylRc, C1-3alkylRf and Re; or R5 is a saturated, partially saturated or unsaturated 5-, 6- or 7-membered monocyclic or 6-, 7-, 8-, 9-, 10- or 11-membered bicyclic ring containing 0, 1, 2, 3 or 4 atoms selected from N, O and S, wherein the carbon atoms of the ring are substituted by 0, 1 or 2 oxo groups and the ring is substituted by 0, 1, 2, 3 or 4 substituents selected from C1-8alkyl, C1-4haloalkyl, halo, cyano, nitro, —C(═O)Rb, —C(═O)ORb, —C(═O)NRaRa, —C(═NRa)NRaRa, —ORa, —C(═O)Rb, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —N(Ra)S(═O)2NRaRa, —NRaC2-6alkylNRaRa, —NRaC2-6alkylORa and Re.
In another embodiment, in conjunction with any one of the above and below embodiments, R5 is, at each instance, H.
In another embodiment, in conjunction with any one of the above and below embodiments, at least one R5 is C1-8alkyl, C1-4haloalkyl, halo, cyano, —C(═O)Rb, —C(═NRa)NRaRa, —ORa, —OC(═O)Rb, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —N(Ra)S(═O)2NRaRa, —NRaC2-6alkylNRaRa, —NRaC2-6alkylORa, C1-3alkylRb, C1-3alkylRf and Re.
In another embodiment, in conjunction with any one of the above and below embodiments, at least one R5 is a saturated, partially saturated or unsaturated 5-, 6- or 7-membered monocyclic or 6-, 7-, 8-, 9-, 10- or 11-membered bicyclic ring containing 0, 1, 2, 3 or 4 atoms selected from N, O and S, wherein the carbon atoms of the ring are substituted by 0, 1 or 2 oxo groups and the ring is substituted by 0, 1, 2, 3 or 4 substituents selected from C1-8alkyl, C1-4haloalkyl, halo, cyano, nitro, —C(═O)Rb, —C(═O)ORb, —C(═O)NRaRa, —C(═NRa)NRaRa, —ORa, —OC(═O)Ra, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —N(Ra)S(═O)2NRaRa, —NRaC2-6alkylNRaRa, —NRaC2-6alkylORa and Re.
In another embodiment, in conjunction with any one of the above and below embodiments, at least one R5 is an unsaturated 5-, 6- or 7-membered monocyclic ring containing 0, 1, 2 or 3 atoms selected from N, O and S, wherein the carbon atoms of the ring are substituted by 0, 1 or 2 oxo groups and the ring is substituted by 0, 1, 2, 3 or 4 substituents selected from C1-8alkyl, C1-4haloalkyl, halo, cyano, nitro, —C(═O)Rb, —C(═O)ORb, —C(═O)NRaRa, —C(═NRa)NRaRa, —ORa, —OC(═O)Rb, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —N(Ra)S(═O)NRaRa, —NRaC2-6alkylNRaRa, —NRaC2-6alkylORa and Re.
In another embodiment, in conjunction with any one of the above and below embodiments, at least one R5 is an unsaturated 6-membered monocyclic ring containing 0, 1 or 2 N atoms, wherein the ring is substituted by 0, 1, 2, 3 or 4 substituents selected from C1-8alkyl, C1-4haloalkyl, halo, cyano, nitro, —C(═O)Rb, —C(═O)ORb, —C(═O)NRaRa, —C(═NRa)NRaRa, —ORa, —OC(═O)Rb, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —N(Ra)S(═O)2NRaRa, —NRaC2-6alkylNRaRa, —NRaC2-6alkylORa and Re.
In another embodiment, in conjunction with any one of the above and below embodiments, at least one R5 is a saturated, partially saturated or unsaturated 6-, 7-, 8-, 9-, 10- or 11-membered bicyclic ring containing 0, 1, 2, 3 or 4 atoms selected from N, O and S, wherein the carbon atoms of the ring are substituted by 0, 1 or 2 oxo groups and the ring is substituted by 0, 1, 2, 3 or 4 substituents selected from C1-8alkyl, C1-4haloalkyl, halo, cyano, nitro, —C(═O)Rb, —C(═O)ORb, —C(═O)NRaRa, —C(═NRa)NRaRa, —ORa, —OC(═O)Rb, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —(Ra)S(═O)2Rb, —N(Ra)S(═O)2NRaRa, —NRaC2-6alkylNRaRa, —NRaC2-6alkylORa and Re.
In another embodiment, in conjunction with any one of the above and below embodiments, R6 is, at each instance, H.
In another embodiment, in conjunction with any one of the above and below embodiments, at least one R6 is selected from C1-8alkyl, C1-4haloalkyl, halo, cyano, —C(═O)Rb, —C(═O)ORb, —C(═O)NRaRa, —C(═NRa)NRaRa, —OC(═O)Rb, —OC(═O)NRaRa, —OC(═O)N(Ra)S(═O)2Rb, —OC2-6alkylNRaRa, —OC2-6alkylORa, —SRa, —S(═O)Rb, —S(═O)2Rb, —S(═O)2NRaRa, —S(═O)2N(Ra)C(═O)Rb, —S(═O)2N(Ra)C(═O)ORb, —S(═O)2N(Ra)C(═O)NRaRa, —N(Ra)C(═O)Rb, —N(Ra)C(═O)ORb, —N(Ra)C(═O)NRaRa, —N(Ra)C(═NRa)NRaRa, —N(Ra)S(═O)2Rb, —N(Ra)S(═O)2NRaRa, —NRaC2-6alkylNRaRa, —NRaC2-6alkylORa and Re.
In another embodiment, in conjunction with any one of the above and below embodiments, at least one R6 is selected from C1-8alkyl, C1-4haloalkyl and halo.
In another embodiment, in conjunction with any one of the above and below embodiments, at least one R6 is selected from C1-4haloalkyl and halo.
Another aspect of the invention relates to a method of treating acute, inflammatory and neuropathic pain, dental pain, general headache, migraine, cluster headache, mixed-vascular and non-vascular syndromes, tension headache, general inflammation, arthritis, rheumatic diseases, osteoarthritis, inflammatory bowel disorders, inflammatory eye disorders, inflammatory or unstable bladder disorders, psoriasis, skin complaints with inflammatory components, chronic inflammatory conditions, inflammatory pain and associated hyperalgesia and allodynia, neuropathic pain and associated hyperalgesia and allodynia, diabetic neuropathy pain, causalgia, sympathetically maintained pain, deafferentation syndromes, asthma, epithelial tissue damage or dysfunction, herpes simplex, disturbances of visceral motility at respiratory, genitourinary, gastrointestinal or vascular regions, wounds, burns, allergic skin reactions, pruritus, vitiligo, general gastrointestinal disorders, gastric ulceration, duodenal ulcers, diarrhea, gastric lesions induced by necrotising agents, hair growth, vasomotor or allergic rhinitis, bronchial disorders or bladder disorders, comprising the step of administering a compound according to any of the above embodiments.
Another aspect of the invention relates to a pharmaceutical composition comprising a compound according to any of the above embodiments and a pharmaceutically-acceptable diluent or carrier.
Another aspect of the invention relates to the use of a compound according to any of the above embodiments as a medicament.
Another aspect of the invention relates to the use of a compound according to any of the above embodiments in the manufacture of a medicament for the treatment of acute, inflammatory and neuropathic pain, dental pain, general headache, migraine, cluster headache, mixed-vascular and non-vascular syndromes, tension headache, general inflammation, arthritis, rheumatic diseases, osteoarthritis, inflammatory bowel disorders, inflammatory eye disorders, inflammatory or unstable bladder disorders, psoriasis, skin complaints with inflammatory components, chronic inflammatory conditions, inflammatory pain and associated hyperalgesia and allodynia, neuropathic pain and associated hyperalgesia and allodynia, diabetic neuropathy pain, causalgia, sympathetically maintained pain, deafferentation syndromes, asthma, epithelial tissue damage or dysfunction, herpes simplex, disturbances of visceral motility at respiratory, genitourinary, gastrointestinal or vascular regions, wounds, burns, allergic skin reactions, pruritus, vitiligo, general gastrointestinal disorders, gastric ulceration, duodenal ulcers, diarrhea, gastric lesions induced by necrotising agents, hair growth, vasomotor or allergic rhinitis, bronchial disorders or bladder disorders.
The compounds of this invention may have in general several asymmetric centers and are typically depicted in the form of racemic mixtures. This invention is intended to encompass racemic mixtures, partially racemic mixtures and separate enantiomers and diasteromers.
Unless otherwise specified, the following definitions apply to terms found in the specification and claims:
“Cα-βalkyl” means an alkyl group comprising a minimum of α and a maximum of β carbon atoms in a branched, cyclical or linear relationship or any combination of the three, wherein α and β represent integers. The alkyl groups described in this section may also contain one or two double or triple bonds. Examples of C1-6alkyl include, but are not limited to the following:
“Benzo group”, alone or in combination, means the divalent radical C4H4═, one representation of which is —CH═CH—CH═CH—, that when vicinally attached to another ring forms a benzene-like ring—for example tetrahydronaphthylene, indole and the like.
“Halo” or “halogen” means a halogen atoms selected from F, Cl, Br and I.
“CV—Whaloalkyl” means an alkyl group, as described above, wherein any number—at least one—of the hydrogen atoms attached to the alkyl chain are replaced by F, Cl, Br or I.
“Heterocycle” means a ring comprising at least one carbon atom and at least one other atom selected from N, O and S. Examples of heterocycles that may be found in the claims include, but are not limited to, the following:
“Available nitrogen atoms” are those nitrogen atoms that are part of a heterocycle and are joined by two single bonds (e.g. piperidine), leaving an external bond available for substitution by, for example, H or CH3.
“Pharmaceutically-acceptable salt” means a salt prepared by conventional means, and are well known by those skilled in the art. The “pharmacologically acceptable salts” include basic salts of inorganic and organic acids, including but not limited to hydrochloric acid, hydrobromic acid, sulfuric acid, phosphoric acid, methanesulfonic acid, ethanesulfonic acid, malic acid, acetic acid, oxalic acid, tartaric acid, citric acid, lactic acid, fumaric acid, succinic acid, maleic acid, salicylic acid, benzoic acid, phenylacetic acid, mandelic acid and the like. When compounds of the invention include an acidic function such as a carboxy group, then suitable pharmaceutically acceptable cation pairs for the carboxy group are well known to those skilled in the art and include alkaline, alkaline earth, ammonium, quaternary ammonium cations and the like. For additional examples of “pharmacologically acceptable salts,” see infra and Berge et al., J. Pharm. Sci. 66:1 (1977).
“Saturated or unsaturated” includes substituents saturated with hydrogens, substituents completely unsaturated with hydrogens and substituents partially saturated with hydrogens.
“Leaving group” generally refers to groups readily displaceable by a nucleophile, such as an amine, a thiol or an alcohol nucleophile. Such leaving groups are well known in the art. Examples of such leaving groups include, but are not limited to, N-hydroxysuccinimide, N-hydroxybenzotriazole, halides, triflates, tosylates and the like. Preferred leaving groups are indicated herein where appropriate. “Protecting group” generally refers to groups well known in the art which are used to prevent selected reactive groups, such as carboxy, amino, hydroxy, mercapto and the like, from undergoing undesired reactions, such as nucleophilic, electrophilic, oxidation, reduction and the like. Preferred protecting groups are indicated herein where appropriate. Examples of amino protecting groups include, but are not limited to, aralkyl, substituted aralkyl, cycloalkenylalkyl and substituted cycloalkenyl alkyl, allyl, substituted allyl, acyl, alkoxycarbonyl, aralkoxycarbonyl, silyl and the like. Examples of aralkyl include, but are not limited to, benzyl, ortho-methylbenzyl, trityl and benzhydryl, which can be optionally substituted with halogen, alkyl, alkoxy, hydroxy, nitro, acylamino, acyl and the like, and salts, such as phosphonium and ammonium salts. Examples of aryl groups include phenyl, naphthyl, indanyl, anthracenyl, 9-(9-phenylfluorenyl), phenanthrenyl, durenyl and the like. Examples of cycloalkenylalkyl or substituted cycloalkylenylalkyl radicals, preferably have 6-10 carbon atoms, include, but are not limited to, cyclohexenyl methyl and the like. Suitable acyl, alkoxycarbonyl and aralkoxycarbonyl groups include benzyloxycarbonyl, t-butoxycarbonyl, iso-butoxycarbonyl, benzoyl, substituted benzoyl, butyryl, acetyl, trifluoroacetyl, trichloro acetyl, phthaloyl and the like. A mixture of protecting groups can be used to protect the same amino group, such as a primary amino group can be protected by both an aralkyl group and an aralkoxycarbonyl group. Amino protecting groups can also form a heterocyclic ring with the nitrogen to which they are attached, for example, 1,2-bis(methylene)benzene, phthalimidyl, succinimidyl, maleimidyl and the like and where these heterocyclic groups can further include adjoining aryl and cycloalkyl rings. In addition, the heterocyclic groups can be mono-, di- or tri-substituted, such as nitrophthalimidyl. Amino groups may also be protected against undesired reactions, such as oxidation, through the formation of an addition salt, such as hydrochloride, toluenesulfonic acid, trifluoroacetic acid and the like. Many of the amino protecting groups are also suitable for protecting carboxy, hydroxy and mercapto groups. For example, aralkyl groups. Alkyl groups are also suitable groups for protecting hydroxy and mercapto groups, such as tert-butyl.
Silyl protecting groups are silicon atoms optionally substituted by one or more alkyl, aryl and aralkyl groups. Suitable silyl protecting groups include, but are not limited to, trimethylsilyl, triethylsilyl, triisopropylsilyl, tert-butyldimethylsilyl, dimethylphenylsilyl, 1,2-bis(dimethylsilyl)benzene, 1,2-bis(dimethylsilyl)ethane and diphenylmethylsilyl. Silylation of an amino groups provide mono- or di-silylamino groups. Silylation of aminoalcohol compounds can lead to a N,N,O-trisilyl derivative. Removal of the silyl function from a silyl ether function is readily accomplished by treatment with, for example, a metal hydroxide or ammonium fluoride reagent, either as a discrete reaction step or in situ during a reaction with the alcohol group. Suitable silylating agents are, for example, trimethylsilyl chloride, tert-butyldimethylsilyl chloride, phenyldimethylsilyl chloride, diphenylmethyl silyl chloride or their combination products with imidazole or DMF. Methods for silylation of amines and removal of silyl protecting groups are well known to those skilled in the art. Methods of preparation of these amine derivatives from corresponding amino acids, amino acid amides or amino acid esters are also well known to those skilled in the art of organic chemistry including amino acid/amino acid ester or aminoalcohol chemistry.
Protecting groups are removed under conditions which will not affect the remaining portion of the molecule. These methods are well known in the art and include acid hydrolysis, hydrogenolysis and the like. A preferred method involves removal of a protecting group, such as removal of a benzyloxycarbonyl group by hydrogenolysis utilizing palladium on carbon in a suitable solvent system such as an alcohol, acetic acid, and the like or mixtures thereof. A t-butoxycarbonyl protecting group can be removed utilizing an inorganic or organic acid, such as HCl or trifluoroacetic acid, in a suitable solvent system, such as dioxane or methylene chloride. The resulting amino salt can readily be neutralized to yield the free amine. Carboxy protecting group, such as methyl, ethyl, benzyl, tert-butyl, 4-methoxyphenylmethyl and the like, can be removed under hydrolysis and hydrogenolysis conditions well known to those skilled in the art.
It should be noted that compounds of the invention may contain groups that may exist in tautomeric forms, such as cyclic and acyclic amidine and guanidine groups, heteroatom substituted heteroaryl groups (Y′═O, —S, NR), and the like, which are illustrated in the following examples:
though one form is named, described, displayed and/or claimed herein, all the tautomeric forms are intended to be inherently included in such name, description, display and/or claim.
Prodrugs of the compounds of this invention are also contemplated by this invention. A prodrug is an active or inactive compound that is modified chemically through in vivo physiological action, such as hydrolysis, metabolism and the like, into a compound of this invention following administration of the prodrug to a patient. The suitability and techniques involved in making and using prodrugs are well known by those skilled in the art. For a general discussion of prodrugs involving esters see Svensson and Tunek Drug Metabolism Reviews 165 (1988) and Bundgaard Design of Prodrugs, Elsevier (1985). Examples of a masked carboxylate anion include a variety of esters, such as alkyl (for example, methyl, ethyl), cycloalkyl (for example, cyclohexyl), aralkyl (for example, benzyl, p-methoxybenzyl), and alkylcarbonyloxyalkyl (for example, pivaloyloxymethyl). Amines have been masked as arylcarbonyloxymethyl substituted derivatives which are cleaved by esterases in vivo releasing the free drug and formaldehyde (Bungaard J. Med. Chem. 2503 (1989)). Also, drugs containing an acidic NH group, such as imidazole, imide, indole and the like, have been masked with N-acyloxymethyl groups (Bundgaard Design of Prodrugs, Elsevier (1985)). Hydroxy groups have been masked as esters and ethers. EP 039,051 (Sloan and Little, Apr. 11, 1981) discloses Mannich-base hydroxamic acid prodrugs, their preparation and use.
The specification and claims contain listing of species using the language “selected from . . . and . . . ” and “is . . . or . . . ” (sometimes referred to as Markush groups). When this language is used in this application, unless otherwise stated it is meant to include the group as a whole, or any single members thereof, or any subgroups thereof. The use of this language is merely for shorthand purposes and is not meant in any way to limit the removal of individual elements or subgroups as needed.
Unless otherwise noted, all materials were obtained from commercial suppliers and used without further purification. All parts are by weight and temperatures are in degrees centigrade unless otherwise indicated. All microwave assisted reactions were conducted with a Smith Synthesizer from Personal Chemistry, Uppsala, Sweden. All compounds showed NMR spectra consistent with their assigned structures. Melting points were determined on a Buchi apparatus and are uncorrected. Mass spectral data was determined by electrospray ionization technique. All examples were purified to >90% purity as determined by high-performance liquid chromatography. Unless otherwise stated, reactions were run at room temperature.
The following abbreviations are used:
A mixture of 2,6-dichlorophenylaniline (810 mg, 5 mmol, Aldrich) and bis(2-chloroethyl)amine hydrochloride (823 mg, 5 mmol, Aldrich) was subjected to microwave irradiation at 200° C. for 10 min. The reaction mixture was allowed to cool to room temperature then treated with 5N NaOH (5 mL) and extracted with EtOAc (2×20 mL). The combined organic extracts were washed with brine (5 mL), dried over Na2SO4 and filtered. The solvent was removed in vacuo and the residue was purified by silica gel chromatography, eluting with 10% MeOH/CH2Cl2+1% ammonia (30% in water) to give the title compound. MS (ESI, pos. ion) m/z: 231 (M+1).
A mixture of 4-trifluoromethyl-1,2-phenylenediamine (8.8 g, 50 mmol, Lancaster) and 1,1′-carbonyldiimidazole (9.0 g, 55 mmol, Aldrich) in THF (50 mL) was stirred at room temperature for 16 h. The solvent was removed in vacuo and the residue was purified by silica gel chromatography, eluting with EtOAc to give the title compound. MS (ESI, pos. ion) m/z: 203 (M+1).
A solution of the dihydrobenzoimidazol-2-one from step (b) above (2.02 g, 10 mmol) in POCl3 (30 mL) was heated at 95° C. for 16 h. The reaction mixture was cooled to room temperature, the solvent was removed in vacuo and the resulting oily residue subjected to azeotropic distillation with toluene (3×50 mL) at 50° C. The crude product was dissolved in EtOAc (50 mL), washed with brine (10 mL) then dried over Na2SO4 and filtered. The solvent was removed in vacuo and the residue was recrystallized from EtOAc/hexane to give the title compound.
A mixture of the benzoimidazole from step (c) above (75 mg, 0.34 mmol), the piperazine from step (a) above (90 mg, 0.39 mmol) and N,N-diisopropylethylamine (0.1 mL, 0.58 mmol, Aldrich) in DMSO (2 mL) was stirred at 80° C. for 24 h. The mixture was cooled to room temperature, water (10 mL) was added and the mixture was extracted with EtOAc (2×20 mL). The combined organic phases were washed with water (2×10 mL) and brine (5 mL), dried over Na2SO4, and filtered. The solvent was removed in vacuo and the residue was purified by silica gel chromatography, eluting with 20% EtOAc/hexane to give the title compound as a white solid. M.p. 263-265° C. MS (ESI, pos. ion) m/z: 415 (M+1).
A mixture of 2-chloro-6-trifluoromethyl-1H-benzoimidazole (221 mg, 1 mmol, Example 1c), piperazine (172 mg, 2 mmol, Aldrich) and DMSO (2 mL) was stirred at 80° C. for 24 h. The mixture was cooled to room temperature, water (10 mL) was added and the mixture was extracted with EtOAc (2×20 mL). The combined organic phases were washed with water (2×5 mL) and brine (5 mL), dried over Na2SO4, and filtered. The solvent was removed in vacuo and the residue was purified by silica gel chromatography, eluting with 10% MeOH/CH2Cl2+1% ammonia (30% in water) to give the title compound. MS (ESI, pos. ion) m/z: 271 (M+1).
A mixture of the benzoimidazole from step (a) above (96 mg, 0.36 mmol), 2,6-dichlorobenzyl bromide (86 mg, 0.36 mmol, Aldrich) and NaHCO3 (151 mg, 1.8 mmol) in DMF (2 mL) was stirred at room temperature for 16 h. Water (10 mL) was then added and the mixture was extracted with EtOAc (2×20 mL). The combined organic phases were washed with water (5 mL) and brine (5 mL) then dried over Na2SO4 and filtered. The solvent was removed in vacuo and the residue purified by silica gel chromatography, eluting with 40% EtOAc/hexane. The material was recrystallized from EtOAc/hexanes to give the title compound as a white solid. M.p. 254-256° C. MS (ESI, pos. ion) m/z: 429 (M+1).
A mixture of 2,3-dichloropyridine (10 g, 67.5 mmol, Aldrich), tert-butyl 1-piperazinecarboxylate (12.58 g, 67.5 mmol, Aldrich), copper powder (0.5 g, 7.8 mmol) and K2CO3 (9.33 g, 67.5 mmol) in DMF (100 mL) was stirred at 120° C. for 16 h. The reaction mixture was cooled to room temperature, concentrated in vacuo and the residue was dissolved in EtOAc (200 mL). The organic solution was washed with saturated aqueous solution of NaHCO3 (50 mL) and brine (50 mL), dried over Na2SO4, and filtered. The solvent was removed in vacuo and the residue was purified by silica gel column chromatography, eluting with 15% EtOAc/hexane, to give the title compound as an orange oil. MS (ESI, pos. ion) m/z: 298 (M+1).
To a solution of the ester from step (a) above (2.98 g, 10 mmol) in MeOH (5 mL) was added saturated solution of hydrogen chloride in EtOAc (50 mL) and the mixture was stirred at room temperature for 4 h. The solvent was removed in vacuo, and the residue was washed with EtOAc and dried in the air to provide the title compound as a light-yellow solid. MS (ESI, pos. ion) m/z: 198 (M+1).
A mixture of the hydrochloride salt from step (b) above (0.564 g, 2.4 mmol), 2-chloro-6-trifluoromethyl-1H-benzoimidazole (0.27 g, 1.22 mmol, Example 1c) and N,N-diisopropylethylamine (0.84 mL, 4.8 mmol, Aldrich) in MeCN (1 mL) was subjected to microwave irradiation at 180° C. with stirring for 20 min. The solvent was removed in vacuo and the residue was purified by silica gel chromatography, eluting with 30% EtOAc/hexane, to give the title compound as a white solid. M.p. 208-210° C. MS (ESI, pos. ion) m/z: 382 (M+1).
N,N-Diisopropylethylamine (14 mL, 0.1 mol, Aldrich) was added drop-wise to a solution of n-butyllithium (40 mL, 2.5M in hexane, Aldrich) in a THF/hexane (140 mL/60 mL) mixture with stirring at −78° C. 3-Chloropyridine (9.4 mL, 0.1 mol, Aldrich) was added, the reaction mixture was stirred at −78° C. for 2 h and then treated with 1,1,2-trichlorotrifluoroethane (12 mL, 0.1 mol, Aldrich) at −78° C. The reaction was quenched with a saturated aqueous solution of NaHCO3 (100 mL) and extracted with EtOAc (2×100 mL). The combined organic extracts were dried over Na2SO4, filtered and concentrated in vacuo. The residue was purified by silica gel column chromatography (10% EtOAc/hexane) to afford the title compound as an orange oil. MS (ESI, pos. ion) m/z: 150 (M+1).
The pyridine from step (a) above (5 g, 3.38 mmol) and tert-butylpiperazinecarboxylate (6.29 g, 3.38 mmol, Aldrich) reacted under the conditions of Example 3a to give the title compound as an orange oil. MS (ESI, pos. ion) m/z: 298 (M+1).
A solution of the ester from step (b) above (5 g, 16.79 mmol) in a 1:1 mixture of CF3COOH/CH2Cl2 (50 mL) was stirred for 2 h at room temperature. The solvent was removed in vacuo to give the title compound as an orange oil, which was used in the next step without purification. MS (ESI, pos. ion) m/z: 198 (M+1).
The piperazine from step (c) above (0.9 g, 1.67 mmol), 2-chloro-6-trifluoromethyl-1H-benzoimidazole (0.370 g, 1.67 mmol, Example 1c) and N,N-diisopropylethylamine (1.16 mL, 6.68 mmol, Aldrich) reacted under the conditions of Example 3c and the product was purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound. M.p. 159-161° C. MS (ESI, pos. ion) m/z: 382 (M+1).
3-Chloro-4,5-diaminobenzotrifluoride (10 g, 47.48 mmol, Lancaster) reacted under the conditions of Example 1b to give the title compound. MS (ESI, pos. ion) m/z: 237 (M+1).
The benzoimidazol-2-one from step (a) above (10.2 g, 43.1 mmol) reacted under the conditions of Example 1c to give the title compound as a white solid. MS (ESI, pos. ion) m/z: 255 (M+1).
The benzoimidazole from step (b) above (69.3 mg, 0.3 mmol) reacted with 1-(3-trifluoromethylpyridin-2-yl)piperazine (128 mg, 0.5 mmol, Fluorochem) under the conditions of Example 1d to give the title compound as a white solid. M.p. 204° C. MS (ESI, pos. ion) m/z: 450 (M+1).
3-Bromo-4,5-diaminobenzotrifluoride (9.9 g, 38.8 mmol, Apollo) reacted under the conditions of Example 1b to give the title compound. MS (ESI, pos. ion) m/z: 281 (M+1).
The benzoimidazol-2-one from step (a) above (7.42 g, 26.4 mmol) reacted under the conditions of Example 1c to give the title compound as a white solid. MS (ESI, pos. ion) m/z: 299 (M+1).
The benzoimidazole from step (b) above (210 mg, 0.7 mmol), 1-(3-chloropyridin-2-yl)piperazine hydrochloride (187 mg, 0.8 mmol, Example 3b) and N,N-diisopropylethylamine (0.28 mL, 1.6 mmol, Aldrich) were reacted under the conditions of Example 3c to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 461 (M+1).
The reaction of 1-(3-trifluoromethylpyridin-2-yl)piperazine (128 mg, 0.5 mmol, Fluorochem) and 4-bromo-2-chloro-6-trifluoromethyl-1H-benzoimidazole (210 mg, 0.7 mmol, Example 6b) under the conditions of Example 3c afforded the title compound as a white solid. M.p. 196° C. MS (ESI, pos. ion) m/z: 494 (M+1).
The reaction of 1-(3-chloropyridin-2-yl)piperazine hydrochloride (99 mg, 0.5 mmol, Example 3b) and 2,4-dichloro-6-trifluoromethyl-1H-benzoimidazole (76 mg, 0.3 mmol, Example 5b) and N,N-diisopropylethylamine (0.17 mL, 1 mmol, Aldrich) under the conditions of Example 3c afforded the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 416 (M+1).
Piperazine (256 mg, 3.0 mmol, Aldrich) and 2,3,5-trichloropyridine (364 mg, 20 mmol, Aldrich) were reacted under the conditions of Example 3a to give the title compound as a light-yellow solid. MS (ESI, pos. ion) m/z: 232 (M+1).
The piperazine from step (a) above (162 mg, 0.7 mmol) and 4-bromo-2-chloro-6-trifluoromethyl-1H-benzoimidazole (168 mg, 0.56 mmol, Example 6b) reacted under the conditions of Example 3c to give the title compound as a white solid. M.p. 176-179° C. MS (ESI, pos. ion) m/z: 495 (M+1).
A mixture of 4-bromo-6-trifluoromethyl-2-[4-(3-trifluoromethylpyridin-2-yl)piperazin-1-yl]-1H-benzoimidazole (99 mg, 0.2 mmol, Example 7), diethyl(3-pyridyl)borane (37 mg, 0.25 mmol, Aldrich), Pd(PPh3)4 (23 mg, 0.02 mmol, Aldrich), Na2CO3 (32 mg, 0.3 mmol) and dimethoxyethane (1 mL) was subjected to microwave irradiation at 200° C. with stirring for 40 min. The solvent was removed in vacuo and the residue was purified by silica gel chromatography, eluting with 60% EtOAc/hexane, to give the title compound as a yellow amorphous solid. MS (ESI, pos. ion) m/z: 493 (M+1).
The reaction of 4-bromo-2-[4-(3-chloropyridin-2-yl)piperazin-1-yl]-6-trifluoromethyl-1H-benzoimidazole (92 mg, 0.2 mmol, Example 6c) under the conditions of Example 10 gave the title compound as a yellow amorphous solid. MS (ESI, pos. ion) m/z: 459 (M+1).
The reaction of 1-(3-chloro-5-trifluoromethylpyridin-2-yl)piperazine (212 mg, 0.8 mmol, ABCR) and 4-bromo-2-chloro-6-trifluoromethyl-1H-benzoimidazole (210 mg, 0.7 mmol, Example 6b) under the conditions of Example 3c afforded the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 530 (M+1).
2,3-Dichloropyridine (1.48 g, 10 mmol, Aldrich) and piperidine-4-carboxylic acid methyl ester (1.43 g, 10 mmol, Aldrich) were reacted under the conditions of Example 3a to give the title compound as a colorless viscous oil. MS (ESI, pos. ion) m/z: 256 (M+1).
A mixture of the ester from step (a) above (1.77 g, 6.9 mmol) and 5N NaOH (4 mL) in THF/MeOH (20 mL/30 mL) mixture was stirred at room temperature for 16 h. The organic solvent was removed in vacuo, the aqueous solution was acidified with 10% HCl to pH 2 and then lyophilized to give the title compound, which was used in the next step without additional purification. MS (ESI, pos. ion) m/z: 241 (M+1).
To a solution of the acid from step (b) above (0.48 g, 2 mmol) in DMF (20 mL) was added 3,4-diaminobenzotrifluoride (0.354 g, 2 mmol, Lancaster), followed by N,N-diisopropylethylamine (0.516 g, 4 mmol, Aldrich) and O-(7-azabenzotriazol-1-yl)-N,N,N′,N′-tetramethyluronium hexafluorophosphate (0.912 g, 2.4 mmol, Aldrich). The reaction mixture was stirred at room temperature for 16 h, and then concentrated in vacuo. The residue was dissolved in EtOAc and the organic solution was washed with saturated NaHCO3 and brine, dried over MgSO4, filtered, and concentrated in vacuo. The residue was purified by silica gel chromatography, eluting with hexane/EtOAc (3:7) to give the title compound as a purple solid. MS (ESI, pos. ion) m/z: 399 (M+1).
A solution of the mixture of the amides from step (c) above in AcOH/toluene (30 mL/3 mL) was stirred at 75° C. for 3 h in a 100 mL round-bottomed flask opened to air. The reaction was then cooled to room temperature and the solvent was removed in vacuo. The residue was dissolved in EtOAc and the organic solution was washed with saturated NaHCO3 and brine, dried over MgSO4, filtered, and concentrated in vacuo. The residue was purified by silica gel chromatography, eluting with EtOAc/hexane (1:3) to afford the title compound as a brown solid. M.p. 74° C. MS (ESI, pos. ion) m/z: 381 (M+1).
The reaction of 4-methylbenzene-1,2-diamine (14.36 g, 0.117 mol, Aldrich) under the conditions of Example 1b afforded the title compound as an off-white solid. MS (ESI, pos. ion) m/z: 149 (M+1).
The benzoimidazol-2-one from step (a) above (4.5 g, 0.03 mol) reacted under the conditions of Example 1c to give the title compound as a pink solid. MS (ESI, pos. ion) m/z: 167 (M+1).
The benzoimidazole from step (b) above (0.287 g, 1.73 mmol) and 1-(3,5-dichloropyridin-4-yl)piperazine (0.4 g, 1.73 mmol, Maybridge) reacted under the conditions of Example 1d to give the title compound as a white solid. M.p. 251-254° C. MS (ESI, pos. ion) m/z: 362 (M+1).
The reaction of 2-chloro-6-methyl-1H-benzoimidazole (0.202 g, 1.59 mmol, Example 14b), 1-(3-chloropyridin-2-yl)piperazine hydrochloride (0.373 g, 1.22 mmol, Example 3b) and N,N-diisopropylethylamine (0.56 mL, 3.2 mmol, Aldrich) under the conditions of Example 3c afforded the title compound as a white solid. M.p. 258-259° C. MS (ESI, pos. ion) m/z: 328 (M+1).
The reaction of 2-chloro-6-methyl-1H-benzoimidazole (0.261 g, 1.57 mmol, Example 14b) with 1-(3-trifluoromethylpyridin-2-yl)piperazine (0.54 g, 1.6 mmol, Maybridge) under the conditions of Example 3c afforded the title compound as a white solid. M.p. 216-217° C. MS (ESI, pos. ion) m/z: 362 (M+1).
The reaction of 4-tert-butylbenzene-1,2-diamine (5 g, 30.5 mmol, Maybridge) under the conditions of Example 1b afforded the title compound as a white solid. MS (ESI, pos. ion) m/z: 191 (M+1).
The benzoimidazol-2-one from step (a) above (5.4 g, 28 mmol) reacted under the conditions of Example 1c to give the title compound as an off-white solid. MS (ESI, pos. ion) m/z: 209 (M+1).
The benzoimidazole from step (b) above (0.209 g, 1 mmol), 1-(3-chloropyridin-2-yl)piperazine hydrochloride (0.304 g, 1.3 mmol, Example 3b) and N,N-diisopropylethylamine (0.45 mL, 2.6 mmol, Aldrich) were reacted under the conditions of Example 1d to give the title compound as a yellow amorphous solid. MS (ESI, pos. ion) m/z: 371 (M+1).
The 6-tert-butyl-2-chloro-1H-benzoimidazole (209 mg, 1 mmol, Example 17b) and 1-(3,5-dichloropyridin-4-yl)piperazine (464 mg, 2 mmol, Maybridge) reacted under the conditions of Example 1d to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 404 (M+1).
The reaction of 6-tert-butyl-2-chloro-1H-benzoimidazole (0.209 g, 1 mmol, Example 17b) with 1-(3-trifluoromethylpyridin-2-yl)piperazine (0.346 g, 1.65 mmol, Maybridge) under the conditions of Example 3c afforded the title compound as a white solid. M.P. 247-249° C. MS (ESI, pos. ion) m/z: 404 (M+1).
The reaction of 4-chlorobenzene-1,2-diamine (10 g, 0.07 mol, Aldrich) under the conditions of Example 1b afforded the title compound as a red solid. MS (ESI, pos. ion) m/z: 169 (M+1).
The benzoimidazol-2-one from step (a) above (6.5 g, 38.7 mmol) reacted under the conditions of Example 1c to give the title compound as a brown solid. MS (ESI, pos. ion) m/z: 187 (M+1).
The benzoimidazole from step (b) above (0.186 g, 0.995 mmol) and 1-(3-trifluoromethylpyridin-2-yl)piperazine (0.23 g, 0.995 mmol, Maybridge) reacted under the conditions of Example 3c to give the title compound as a white solid. M.p. 228-231° C. MS (ESI, pos. ion) m/z: 382 (M+1).
The 2,5-dichloro-1H-benzoimidazole (0.37 g, 1.98 mmol, Example 20b) and 1-(3,5-dichloropyridin-4-yl)piperazine (0.46 g, 1.98 mmol, Maybridge) reacted under the conditions of Example 3c to give the title compound as a white solid. M.p. 258-260° C. MS (ESI, pos. ion) m/z: 382 (M+1).
The 2,5-dichloro-1H-benzoimidazole (0.244 g, 1.3 mmol, Example 20b), 1-(3-chloropyridin-2-yl)piperazine hydrochloride (0.4 g, 1.7 mmol, Example 3b) and N,N-diisopropylethylamine (0.59 mL, 3.4 mmol, Aldrich) were reacted under the conditions of Example 3c to give the title compound as a white solid. M.p. 214-215° C. MS (ESI, pos. ion) m/z: 348 (M+1).
The reaction of 4-bromobenzene-1,2-diamine (10 g, 53.4 mmol, Indofine) under the conditions of Example 1b afforded the title compound as a gray solid. MS (ESI, pos. ion) m/z: 214 (M+1).
The benzoimidazol-2-one from step (a) above (4.2 g, 20 mmol) reacted under the conditions of Example 1c to give the title compound as a gray solid. MS (ESI, pos. ion) m/z: 232 (M+1).
The benzoimidazole from step (b) above (0.115 g, 0.5 mmol) and 1-(3-trifluoromethylpyridin-2-yl)piperazine (0.231 g, 1 mmol, Maybridge) reacted under the conditions of Example 3c to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 426 (M+1).
The 5-bromo-2-chloro-1H-benzoimidazole (0.115 g, 0.5 mmol, Example 23b), 1-(3-chloropyridin-2-yl)piperazine (0.198 g, 1 mmol, Example 3b) and N,N-diisopropylethylamine (0.35 mL, 2 mmol, Aldrich) were reacted under the conditions of Example 3c to give the title compound as a white solid. M.p. 207-208° C. MS (ESI, pos. ion) m/z: 394 (M+1).
The reaction of 4,5-dichlorobenzene-1,2-diamine (10 g, 56.5 mmol, Aldrich) under the conditions of Example 1b afforded the title compound as an off-white solid. MS (ESI, pos. ion) m/z: 204 (M+1).
The benzoimidazol-2-one from step (a) above (10 g, 49 mmol) reacted under the conditions of Example 1c to give the title compound as an off-white solid.
The benzoimidazole from step (b) above (0.110 g, 0.5 mmol) and 1-(3-trifluoromethylpyridin-2-yl)piperazine (0.231 g, 1 mmol, Maybridge) reacted under the conditions Example 3c to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 416 (M+1).
The 2,5,6-trichloro-1H-benzoimidazole (0.110 g, 0.5 mmol, Example 25b), 1-(3-chloropyridin-2-yl)piperazine hydrochloride (0.234 g, 1 mmol, Example 3b) and N,N-diisopropylethylamine (0.35 mL, 2 mmol, Aldrich) were reacted under the conditions of Example 3c to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 382 (M+1).
The reaction of 4-chloro-5-methylbenzene-1,2-diamine (10 g, 64 mmol, Aldrich) under the conditions of Example 1b afforded the title compound as a off-white solid. MS (ESI, pos. ion) m/z: 204 (M+1).
The benzoimidazol-2-one from step (a) above (10.6 g, 58 mmol, Aldrich) reacted under the conditions of Example 1c to give the title compound as a brown solid. MS (ESI, pos. ion) m/z: 201 (M+1).
The benzoimidazole from step (b) above (0.201 g, 1 mmol) and 1-(3,5-dichloropyridin-4-yl)piperazine (0.462 g, 2 mmol, Maybridge) reacted under the conditions of Example 1d to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 396 (M+1).
A mixture of 2,8-dihydroxyquinoline (4 g, 24.8 mmol, Fluka) and phosphorus oxychloride (20 mL, Aldrich) was stirred at 100° C. for 1 h. The clear solution was cooled to room temperature and poured slowly with stirring into a mixture of NH4OH (150 mL) and crushed ice (200 g). The white solid that precipitated was filtered, dissolved in concentrated HCl (200 mL) and stirred at 100° C. for 1 h. Neutralization of the cooled to room temperature acid solution with NH4OH afforded white precipitate, which was filtered, washed with water and dried to give the title compound as a white solid. MS (ESI, pos. ion) m/z: 180 (M+1).
The quinoline from step (a) above (0.18 g, 1 mmol) and piperazine (0.172 g, 2 mmol, Aldrich) reacted under the conditions of Example 3a to give the title compound as a white solid.
The piperazine from step (b) above (0.329 g, 1.67 mmol) and 2-chloro-6-trifluoromethyl-1H-benzoimidazole (0.370 g, 1.67 mmol, Example 1c) reacted under the conditions of Example 3c to give the title compound. M.p. 191-193° C. MS (ESI, pos. ion) m/z: 414 (M+1).
3,5-bis(trifluoromethyl)-1,2-diaminobenzene (10 g, 41 mmol, ABCR) reacted under the conditions of Example 1b to give the title compound. MS (ESI, pos. ion) m/z: 271 (M+1).
The benzoimidazol-2-one from step (a) above (6 g, 22 mmol) reacted under the conditions of Example 1c to give the title compound as a white solid. MS (ESI, pos. ion) m/z: 289 (M+1).
The benzoimidazole from step (b) above (115 mg, 0.4 mmol) and 1-(3-trifluoromethylpyridin-2-yl)piperazine (140 mg, 0.6 mmol, Maybridge) reacted under the conditions of Example 3c to give the title compound as a white solid. M.p. 142° C. MS (ESI, pos. ion) m/z: 484 (M+1).
The reaction of 4-chloro-3-trifluoromethylpyridine (2.05 g, 9.4 mmol, Matrix Scientific) and tert-butyl 1-piperazinecarboxylate (2.1 g, 11.3 mmol, Aldrich) under the conditions of Example 3a afforded the crude product, which was purified by silica gel column chromatography (60% EtOAc/hexane) to give the title compound as a white solid. MS (ESI, pos. ion) m/z: 332 (M+1).
The ester from step (a) above (1.9 g, 5.7 mmol) reacted under the conditions of Example 3b to give the title compound as a white solid. MS (ESI, pos. ion) m/z: 232 (M+1).
The piperazine from step (b) above (0.55 g, 1.81 mmol), 2-chloro-6-trifluoromethyl-1H-benzoimidazole (0.4 g, 1.81 mmol, Example 1c) and N,N-diisopropylethylamine (0.63 mL, 3.62 mmol, Aldrich) reacted under the conditions of Example 3c to give the title compound as a light-yellow solid. M.p. 220-224° C. MS (ESI, pos. ion) m/z: 416 (M+1).
The reaction of 1-(3-chloro-5-trifluoromethylpyridin-2-yl)piperazine (186 mg, 0.7 mmol, ABCR) and 2,4-dichloro-6-trifluoromethyl-1H-benzoimidazole (127 mg, 0.5 mmol, Example 5b) under the conditions of Example 3c afforded the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 484 (M+1).
A solution of 4-hydroxy-4-phenylpiperidine (5.42 g, 30.5 mmol, Aldrich) and di-tert-butyl dicarbonate (6.67 g, 30.5 mmol, Aldrich) in CH2Cl2 (200 mL) was stirred at room temperature for 16 h. The solvent was removed in vacuo and the residue was suspended in 2% EtOAc/hexane solution (50 mL), filtered and dried in the air to give the title compound as a white solid. MS (ESI, pos. ion) m/z: 278 (M+1).
To a solution of the ester from step (a) above (4.3 g, 15.5 mol) in DMF (30 mL) was added NaH (60% in mineral oil, 0.93 g, 23.2 mmol) and the mixture was stirred at 0° C. for 1 h. MeI (1.16 mL, 18.6 mmol, Aldrich) was added drop-wise with stirring at 0° C., and the mixture was stirred at room temperature for 18 h. The reaction mixture was diluted with EtOAc (50 mL), washed with saturated solution of NH4Cl (25 mL) and brine (25 mL), dried over Na2SO4 and filtered. The solvent was removed in vacuo and the residue purified by silica gel chromatography, eluting with 10% EtOAc/hexane, to give the title compound as a light-yellow oil, which was used in the next step without additional purification. MS (ESI, pos. ion) m/z: 292 (M+1).
A mixture of the ester from step (b) above (8.6 g) and saturated solution of hydrogen chloride in EtOAc (100 mL) was stirred at room temperature for 1 h. The solvent was removed in vacuo and the residue was washed with EtOAc, and dried in vacuo to give the title compound as a white solid. MS (ESI, pos. ion) m/z: 192 (M+1).
The piperidine from step(c) above (0.39 g, 1.72 mmol), 2-chloro-6-trifluoromethyl-1H-benzoimidazole (0.38 g, 1.72 mmol, Example 1c) and N,N-diisopropylethylamine (0.59 mL, 3.4 mmol, Aldrich) reacted under the conditions of Example 1d to give the title compound as an amorphous solid. MS (ESI, pos. ion) m/z: 376 (M+1).
4(3H)-Pyrimidone (2.98 g, 31 mmol, Aldrich) was added to a solution of chlorine (2.2 g, 31 mmol) in AcOH (50 mL) prepared by bubbling of chlorine gas for 10 min at room temperature. The mixture was stirred at room temperature for 5 h and then concentrated to a 30 mL volume by evaporation of the solvent in vacuo. The solid which precipitated was filtered and dried at 40° C. for 24 h to give the title compound as a white solid. MS (ESI, pos. ion) m/z: 131 (M+1).
A solution of the pyrimidin-4-one from step (a) above (3.5 g, 26.8 mmol) in phosphorus oxychloride (50 mL) was heated under for 3 h. The reaction mixture was cooled to room temperature, the solvent was evaporated in vacuo and the residue was dissolved in EtOAc (100 mL). The organic solution was washed with saturated aqueous solution of NaHCO3 (50 mL) and brine (50 mL), dried over Na2SO4, filtered, and concentrated in vacuo. The residue was purified by silica gel column chromatography, eluting with 10% EtOAc/hexane, to give the title compound as an orange oil. MS (ESI, pos. ion) m/z: 131 (M+1).
The pyrimidine from step (b) above (1.75 g, 1.2 mmol) and tert-butyl 1-piperazinecarboxylate (2.235 g, 0.012 mol, Aldrich) reacted under the conditions of Example 3a to give the title compound as an orange oil. MS (ESI, pos. ion) m/z: 299 (M+1).
A solution of the ester from step (c) above (1.8 g, 6 mmol) in a 1:1 mixture of CF3CO2H/CH2Cl2 (60 mL) was stirred at room temperature for 1 h. The solvents were removed in vacuo to give the title compound as an orange oil, which was used in the next step without additional purification: MS (ESI, pos. ion) m/z: 199 (M+1).
The piperazine from step (d) above (0.62 g, 1.45 mmol), 2-chloro-6-trifluoromethyl-1H-benzoimidazole (0.32 g, 1.45 mmol, Example 1c) and N,N-diisopropylethylamine (0.76 mL, 4.35 mmol, Aldrich) reacted under the conditions of Example 1d to give the title compound as an amorphous solid. MS (ESI, pos. ion) m/z: 383 (M+1).
The reaction of 1-(5-chloropyrimidin-4-yl)piperazine trifluoroacetic acid salt (0.414 g, 0.97 mmol, Example 33d), 4-bromo-2-chloro-6-trifluoromethyl-1H-benzoimidazole (0.29 g, 0.97 mmol, Example 9b) and N,N-diisopropylethylamine (0.5 mL, 2.91 mmol, Aldrich) under the conditions of Example 1d gave the title compound as an amorphous solid. MS (ESI, pos. ion) m/z: 461 (M+1).
A mixture of 4-bromo-6-trifluoromethyl-2-[4-(3-trifluoromethylpyridin-2-yl)piperazin-1-yl]-1H-benzoimidazole (148 mg, 0.3 mmol, Example 7), 2-tributylstannylpyridine (148 mg, 0.5 mmol, Frontier), Pd(PPh3)4 (46 mg, 0.04 mmol, Aldrich) and 1,4-dioxane (1 mL) was subjected to microwave irradiation at 140° C. with stirring for 60 min. The solvent was removed in vacuo and the residue was purified by silica gel chromatography, eluting with 60% EtOAc/hexane, to give the title compound as a yellow amorphous solid. MS (ESI, pos. ion) m/z: 493 (M+1).
The reaction of 4-bromo-6-trifluoromethyl-2-[4-(3-trifluoromethylpyridin-2-yl)piperazin-1-yl]-1H-benzoimidazole (148 mg, 0.3 mmol, Example 7) with 2-tributylstannylthiazole (Matrix Scientific) under the conditions of Example 35 gave the title compound as an amorphous solid. MS (ESI, pos. ion) m/z: 499 (M+1).
The reaction of 4-bromo-6-trifluoromethyl-2-[4-(3-trifluoromethylpyridin-2-yl)piperazin-1-yl]-1H-benzoimidazole (Example 7) with 2-tributylstannylpyrazine (Matrix Scientific) under the conditions of Example 35 gave the title compound as an amorphous solid. MS (ESI, pos. ion) m/z: 494 (M+1).
The reaction of 4-bromo-2-[4-(3,5-dichloropyridin-2-yl)piperazin-1-yl]-6-trifluoromethyl-1H-benzoimidazole (99 mg, 0.2 mmol, Example 9) and 3,4-difluorophenylboronic acid (40 mg, 0.25 mmol, Aldrich) under the conditions of Example 10 gave the title compound as a light-yellow amorphous solid. MS (ESI, pos. ion) m/z: 528 (M+1).
A mixture of 2,3,5,6-tetrafluoropyridine (755 mg, 5 mmol, Aldrich), 1-Boc-piperazine (558 mg, 3 mmol, Aldrich) and N,N-diisopropylethylamine (1 mL, 5.8 mmol, Aldrich) in NMP (5 mL) was heated at 150° C. for 16 h. The reaction mixture was cooled to room temperature, water (25 mL) was added, and the mixture was extracted with EtOAc (2×40 mL). The combined organic phases were washed with brine (50 mL), then dried over Na2SO4 and filtered. The filtrate was concentrated in vacuo and the residue was purified by silica gel column chromatography, eluting with 20% EtOAc/hexane to give the title compound as a white solid. MS (ESI, pos. ion) m/z: 318 (M+1).
(Analogous to the procedure of Hee-Gweon Woo; Bo-Hye, Kim and Sun-Jung Song, Bull. Korean Chem. Soc. 1999, 20, 865-866). 4-(3,5,6-Trifluoro-pyridin-2-yl)-piperazine-1-carboxylic acid tert-butyl ester from step (a) above (950 mg, 3 mmol) was added to a mixture of bis(cyclopentadienyl)titanium dichloride (37 mg, 0.15 mmol, Aldrich) and Red-Al (1.32 mL, Aldrich) in toluene (3 mL). The reaction mixture was stirred at room temperature for 3 h and quenched by the addition of water (50 mL). The mixture was extracted with EtOAc (2×40 mL) and the combined organic phases were washed with brine (50 mL), dried over Na2SO4, and filtered. The filtrate was concentrated in vacuo and the residue was purified by silica gel chromatography, eluting with 20% EtOAc/hexane to give the title compound as a light-yellow oil. MS (ESI, pos. ion) m/z: 300 (M+1).
A mixture of 4-(3,5-difluoro-pyridin-2-yl)-piperazine-1-carboxylic acid tert-butyl ester from step (b) above (140 mg, 0.47 mmol) and 4 M solution of HCl in dioxane (1 mL, Aldrich) was stirred at room temperature for 30 h. The solvent was evaporated in vacuo and the residue was dissolved in EtOAc (30 mL). The solution was washed successively with 1 N NaOH (20 mL) and brine (20 mL), dried over MgSO4, filtered, and the solvent was removed in vacuo. The residue was purified by silica gel chromatography, eluting with 10% MeOH in CH2Cl2 to give the title compound as a white solid. MS (ESI, pos. ion) m/z: 200 (M+1).
The piperazine from step (c) above (80 mg, 0.4 mmol) reacted with 2-chloro-6-trifluoromethyl-1H-benzoimidazole (44 mg, 0.2 mmol, Example 1c) under the conditions of Example 3c to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 462 (M+1).
The reaction of 4-bromo-2-[4-(3,5-dichloropyridin-2-yl)piperazin-1-yl]-6-trifluoromethyl-1H-benzoimidazole (99 mg, 0.2 mmol, Example 9) and 3-trifluoromethylphenylboronic acid (48 mg, 0.25 mmol, Aldrich) under the conditions of Example 10 gave the title compound as a light-yellow amorphous solid. MS (ESI, pos. ion) m/z: 560 (M+1).
A mixture of 3-bromo-2-chloropyridine (0.96 g, 5 mmol, Aldrich), piperazine (0.86 g, 10 mmol, Aldrich) and N,N-diisopropylethylamine (1 mL, 5.8 mmol, Aldrich) was heated in a microwave synthesizer for 40 min at 200° C. The reaction mixture was concentrated and the residue was purified by column chromatography on silica gel, eluting with 10% MeOH in dichloromethane to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 242 (M+1).
The piperazine from step (a) above (97 mg, 0.4 mmol) reacted with 6-bis(trifluoromethyl)-2-chloro-1H-benzoimidazole (86 mg, 0.3 mmol, Example 29b) under the conditions of Example 3c to give the title compound as a white amorphous solid. M.p. 166° C. MS (ESI, pos. ion) m/z: 494 (M+1).
A mixture of 4-bromo-6-trifluoromethyl-2-[4-(3-trifluoromethylpyridin-2-yl)piperazin-1-yl]-1H-benzoimidazole (148 mg, 0.3 mmol, Example 7), 0.5 M solution of 3,4-difluorobenzylzinc bromide in THF (2 mL, 1 mmol, Aldrich) and Pd(PPh3)4 (35 mg, 0.03 mmol, Aldrich) was heated at reflux for 12 h. The solvent was removed in vacuo and the residue was purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 542 (M+1).
A mixture of 3-bromo-2-chloropyridine (2 g, 9 mmol, Aldrich), (R)-(−)-2-methylpiperazine (1.5 g. 15 mmol) and N,N-diisopropylethylamine (1 mL, 5.8 mmol) in NMP (1 mL) was heated in a microwave synthesizer for 60 min at 240° C. The reaction mixture was concentrated and purified by silica gel chromatography, eluting with 10% MeOH in dichloromethane to give 0.5 g (22%) of (2R)-1-(3-bromopyridin-2-yl)-2-methylpiperazine MS (ESI, pos. ion). MS m/z: 256 (M+1), and 0.75 g (33%) of (3R)-1-(3-bromopyridin-2-yl)-3-methylpiperazine. MS m/z: 256 (M+1).
(2R)-1-(3-Bromopyridin-2-yl)-3-methylpiperazine from step (a) above (77 mg, 0.3 mmol,) reacted with 2,4-dichloro-6-trifluoromethyl-1H-benzoimidazole (51 mg, 0.2 mmol, Example 5b) under the conditions of Example 3c to give the crude product. Purification by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) gave the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 474 (M+1).
(2R)-1-(3-Bromopyridin-2-yl)-3-methylpiperazine (77 mg, 0.3 mmol, Example 43a) reacted with 2,4-dichloro-6-trifluoromethyl-1H-benzoimidazole (51 mg, 0.2 mmol, Example 5b) under the conditions of Example 3c to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 474 (M+1).
(2R)-1-(3-Bromopyridin-2-yl)-3-methylpiperazine (77 mg, 0.3 mmol, Example 43a) reacted with 2-chloro-4,6-bis-trifluoromethyl-1H-benzoimidazole (58 mg, 0.2 mmol, Example 29b) under the conditions of Example 3c to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 508 (M+1).
A mixture of (2-fluoro-pyridin-3-yl)methanol (1 g, 8 mmol, Asymchem), piperazine (1.3 g, 15 mmol) and N,N-diisopropylethylamine (1 mL, 5.8 mmol, Aldrich) was reacted under the conditions of Example 43a to give the title compound as a white solid. MS (ESI, pos. ion) m/z: 194 (M+1).
The piperazine from step (a) above (97 mg, 0.5 mmol) reacted with 2,4-dichloro-6-trifluoromethyl-1H-benzoimidazole (85 mg, 0.33 mmol, Example 5b) under the conditions of Example 3c to give the title compound as a white solid. M.p. 252° C. MS (ESI, pos. ion) m/z: 412 (M+1).
(2-piperazin-1-ylpyridin-3-yl)methanol (0.48 g, 2.5 mmol, Example 46a) reacted with 4-bromo-2-chloro-6-trifluoromethyl-1H-benzoimidazole (0.60 g, 2 mmol, Example 6b) under the conditions of Example 3c to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 456 (M+1).
A mixture of 2,4-dichloro-6-trifluoromethyl-1H-benzoimidazole (0.51 g, 2 mmol, Example 5b), (R)-(−)-2-methylpiperazine (0.25 g. 2.5 mmol) and N,N-diisopropylethylamine (0.5 mL, 2.9 mmol) in NMP (5 mL) was heated at 120° C. for 16 h. The reaction mixture was cooled to room temperature, diluted with water (10 mL) and extracted with EtOAc (2×20 mL). The combined organic phases were washed with brine (10 mL), dried over Na2SO4 and filtered. The filtrate was concentrated in vacuo and the residue was purified by silica gel chromatography, eluting with 10% MeOH in dichloromethane to give the title compound as a light-yellow solid. MS (ESI, pos. ion) m/z: 319 (M+1).
A mixture of the piperazine from step (a) above (80 mg, 0.25 mmol), 2-chloro-3-trifluoromethyl-pyridine (54 mg, 0.3 mmol, Aldrich) and N,N-diisopropylethylamine (0.5 mL, 2.9 mmol, Aldrich) was heated in a microwave synthesizer for 120 min at 250° C. Water (10 mL) was added and the mixture was extracted with EtOAc (2×20 mL). The combined organic phases were washed with brine (10 mL), dried over Na2SO4 and filtered. The filtrate was concentrated in vacuo and the residue was purified by silica gel chromatography, eluting with 35% EtOAc/hexane to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 464 (M+1).
A mixture of 2,3-dichloro-pyridine (44 mg, 0.3 mmol, Aldrich), 7-chloro-2-[(3R)-3-methylpiperazin-1-yl]-5-(trifluoromethyl)-1H-benzoimidazole (80 mg, 0.25 mmol, Example 48a) and N,N-diisopropylethylamine (0.1 mL, 0.58 mmol, Aldrich) reacted under the conditions of Example 48b to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 430 (M+1).
4-Bromo-2-chloro-6-trifluoromethyl-1H-benzoimidazole (145 mg, 0.5 mmol, Example 6b) reacted with (2R)-1-(3-bromopyridin-2-yl)-2-methylpiperazine (154 mg, 0.6 mmol, Example 43a) under the conditions of Example 3c, and the crude product was purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 518 (M+1).
A mixture of 4-bromo-6-trifluoromethyl-1,3-dihydrobenzoimidazol-2-one (1.12 g, 4 mmol, Example 6a), 3,4,5-trifluorophenylboronic acid (1.1 g, 6 mmol, Lancaster), PdCl2(PPh3)2 (35 mg, 0.05 mmol, Aldrich), Na2CO3.H2O (1 g, 8 mmol), dimethoxyethane (7 mL), H2O (3 mL) and EtOH (2 mL) was subjected to microwave irradiation at 120° C. with stirring for 10 min. Water (10 mL) was added and the mixture was extracted with EtOAc (2×20 mL). The combined organic phases were washed with brine (10 mL), dried over Na2SO4, and filtered. The filtrate was concentrated in vacuo, and the residue was purified by silica gel chromatography, eluting with 35% EtOAc/hexane to give the title compound as a light-brown solid. MS (ESI, pos. ion) m/z: 333 (M+1).
The benzoimidazol-2-one from step (a) above (1.1 g, 3.3 mmol) reacted with POCl3 under the conditions of Example 1c to give the title compound as a white solid. MS (ESI, pos. ion) m/z: 350 (M+1).
The benzoimidazole from step (b) above (105 mg, 0.3 mmol) reacted with (2R)-1-(3-bromopyridin-2-yl)-2-methylpiperazine (77 mg, 0.3 mmol, Example 43a) under the conditions of Example 3c to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 570 (M+1).
The reaction of 4-bromo-2-[4-(3-chloropyridin-2-yl)piperazin-1-yl]-6-trifluoromethyl-1H-benzoimidazole (92 mg, 0.2 mmol, Example 9) with 3,4,5-trifluorophenylboronic acid (52 mg, 0.3 mmol, Lancaster) under the conditions of Example 10 afforded the crude product, which was purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 512 (M+1).
The title compound was prepared from 1-(3-trifluoromethylpyridin-2-yl)piperazine (Maybridge) and 2-chloro-6-trifluoromethyl-1H-benzoimidazole (Example 1c) under the conditions of Example 3c. MS (ESI, pos. ion) m/z: 416 (M+1). M.p. 221-224° C.
4-Bromo-2-[4-(3,5-dichloropyridin-2-yl)piperazin-1-yl]-6-trifluoromethyl-1H-benzoimidazole (296 mg, 0.6 mmol, Example 9) reacted with 3,4,5-trifluorophenylboronic acid (161 mg, 0.9 mmol, Lancaster) under the conditions of Example 51a to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 546 (M+1).
2-Chloro-6-(trifluoromethyl)-4-(3,4,5-trifluorophenyl)-1H-benzoimidazole (140 mg, 0.4 mmol, Example 51b) reacted with 1-(3-bromo-pyridin-2-yl)-piperazine (120 mg, 0.5 mmol, Example 41a) under the conditions of Example 3c to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 556 (M+1).
A mixture of 2-chloro-N-methyl-3-pyridinesulfonamide (1 g, 4.8 mmol, Specs), piperazine (0.43 g, 5 mmol) and N,N-diisopropylethylamine (1 mL, 5.8 mmol, Aldrich) was reacted under the conditions of Example 41a to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 257 (M+1).
The piperazine from step (a) above (128 mg, 0.5 mmol) reacted with 2-chloro-6-(trifluoromethyl)-4-(3,4,5-trifluorophenyl)-1H-benzoimidazole (140 mg, 0.4 mmol, Example 51b) under the conditions of Example 3c to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 571 (M+1).
4-Amino-3,5-dininitrobenzotrifluoride (25 g, 100 mmol, Aldrich) was added to a suspension of 10% Pd/C (4 g) in EtOH (150 mL) under a hydrogen atmosphere. The reaction mixture was stirred at room temperature for 4 h, filtered through a pad of Celite®, and the filtrate was evaporated under reduced pressure. The residue was purified by silica gel column chromatography, eluting with 45% EtOAc/hexane to give the title compound as a yellow solid. MS (ESI, pos. ion) m/z: 222 (M+1).
The reaction of 3-nitro-5-(trifluoromethyl)benzene-1,2-diamine (2.2 g, 10 mmol) with 1,1′-carbonyldiimidazole (1.78 g, 11 mmol, Aldrich) under the conditions of Example 1b afforded the title compound as a yellow solid. MS (ESI, pos. ion) m/z: 248 (M+1).
The benzoimidazol-2-one from step (b) above (1.8 g, 7.3 mmol) reacted with POCl3 under the conditions of Example 1c to give the title compound as a yellow solid. MS (ESI, pos. ion) m/z: 266 (M+1).
The benzoimidazole from step (c) above (1.5 g, 5.7 mmol) and 1-(3-trifluoromethylpyridin-2-yl)piperazine (1.8 g, 7.8 mmol, Matrix) reacted under the conditions of Example 3c to give the title compound as a orange solid. M.p. 192° C. MS (ESI, pos. ion) m/z: 461 (M+1).
7-Nitro-5-(trifluoromethyl)-2-{4-[3-(trifluoromethyl)pyridin-2-yl]piperazin-1-yl}-1H-benzoimidazole (1.8 g, 3.9 mmol, Example 57d) reacted under the conditions of Example 57a to give the title compound as a off-white amorphous solid. MS (ESI, pos. ion) m/z: 431 (M+1).
NaBH(OAc)3 (211 mg, 1 mmol, Aldrich) was added to a mixture of 5-(trifluoromethyl)-2-{4-[3-(trifluoromethyl)pyridin-2-yl]piperazin-1-yl}-1H-benzimidazol-7-amine (215 mg, 0.5 mmol, Example 58) and 3,4,5-trifluoro-benzaldehyde (88 mg, 0.55 mmol, Aldrich) in chloroform (2 mL) in one portion. The reaction mixture was stirred at room temperature for 2 h and concentrated in vacuo. The residue was dissolved in EtOAc (30 mL), and washed successively with 1 N NaOH (15 mL) and brine (15 mL), dried over MgSO4, filtered, and the solvent was evaporated in vacuo. The residue was purified by silica gel chromatography, eluting with 25% EtOAc/hexane to give the title compound as a white solid. MS (ESI, pos. ion) m/z: 575 (M+1).
A mixture of 5,6-dichloro-3-pyridinemethanol (0.71 g, 4 mmol, TCI-US), piperazine (0.52 g, 6 mmol) and N,N-diisopropylethylamine (1 mL, 5.8 mmol, Aldrich) was reacted under the conditions of Example 43a to give the title compound as a light-yellow solid. MS (ESI, pos. ion) m/z: 228 (M+1).
The piperazine from step (a) above (114 mg, 0.5 mmol) reacted with 2-chloro-6-(trifluoromethyl)-4-(3,4,5-trifluorophenyl)-1H-benzoimidazole (140 mg, 0.4 mmol, Example 51b) under the conditions of Example 3c to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 542 (M+1).
4-Nitro-6-(trifluoromethyl)-1,3-dihydro-2H-benzimidazol-2-one (1.7 g, 7 mmol, Example 57b) reacted under the conditions of Example 57a to give the title compound as a brown solid. MS (ESI, pos. ion) m/z: 218 (M+1).
(Analogous to the procedure described in Heterocycles, 2001, 55, 461-464). To a solution of 4-amino-6-(trifluoromethyl)-1,3-dihydro-2H-benzimidazol-2-one from step (a) above (0.76 g, 3.5 mmol) in 20 mL of DCM was added CsI (0.91 g, 3.5 mmol), I2 (0.44 g, 1.75 mmol), and CuI (0.2 g, 1.06 mmol). To the mixture was added isoamyl nitrite (2.8 mL, Aldrich) and the reaction mixture was heated at 60° C. with stirring for 3 h. The reaction mixture was cooled to room temperature, filtered, and the filtrate was diluted with EcOAc (60 mL). The solution was washed with 25% NH4OH (2×30 mL), 5% Na2S2O3 (20 mL) and brine, dried over MgSO4 and filtered. The filtrate was evaporated and the residue was purified by silica gel column chromatography, eluting with 30% EtOAc/hexane to give the title compound as a brown solid. MS (ESI, pos. ion) m/z: 329 (M+1)
4-Iodo-6-(trifluoromethyl)-1,3-dihydro-2H-benzimidazol-2-one (328 mg, 1 mmol) reacted with POCl3 under the conditions of Example 1c to give the title compound as a off-white solid. MS (ESI, pos. ion) m/z: 347 (M+1).
The benzoimidazole from step (c) above (69 mg, 0.2 mmol) reacted with (5-chloro-6-piperazin-1-yl-pyridin-3-yl)methanol (68 mg, 0.3 mmol, Example 60c) under the conditions of Example 3c to give the title compound as a yellow amorphous solid. MS (ESI, pos. ion) m/z: 538 (M+1).
A mixture of 5,6-dichloro-3-pyridinemethanol (0.35 g, 2 mmol, TCI-US) and (R)-(−)-2-methylpiperazine (0.3 g. 3 mmol, Aldrich) reacted under the conditions of Example 43a to give the title compound as a light-brown solid. MS (ESI, pos. ion) m/z: 242 (M+1).
The piperazine from step (a) above (73 mg, 0.3 mmol) reacted with 2-chloro-4-iodo-6-(trifluoromethyl)-1H-benzoimidazole (69 mg, 0.2 mmol, Example 61c) under the conditions of Example 3c to give the title compound as a yellow amorphous solid. MS (ESI, pos. ion) m/z: 552 (M+1).
5-(Trifluoromethyl)-2-{4-[3-(trifluoromethyl)pyridin-2-yl]piperazin-1-yl}-1H-benzimidazol-7-amine (215 mg, 0.5 mmol, Example 58) reacted under the conditions of Example 61b to give the title compound as a light-yellow solid. MS (ESI, pos. ion) m/z: 542 (M+1).
To a mixture of 5-(trifluoromethyl)-2-{4-[3-(trifluoromethyl)pyridin-2-yl]piperazin-1-yl}-1H-benzimidazol-7-amine (86 mg, 0.2 mmol, Example 58) and 3-hydroxy-butyraldehyde (26.4, 0.3 mmol, Pfaltz&Bauer) in dichloromethane (2 mL) was added NaBH(OAc)3 (127 mg, 0.6 mmol) and one drop of acetic acid. The reaction mixture was stirred at room temperature for 12 h, diluted with dichloromethane (10 mL), washed with satd aq. NaHCO3 solution (10 mL), dried over Na2SO4, and filtered. The filtrate was evaporated and the residue was purified by silica gel column chromatography, eluting with 60% EtOAc/hexane to give the crude product. Additional purification by preparative HPLC (gradient 0.11% trifluoroacetic acid in acetonitrile) afforded the title compound as white amorphous solid. MS (ESI, pos. ion) m/z: 503 (M+1).
To a 25-mL, round-bottom flask was added 5-(trifluoromethyl)-2-{4-[3-(trifluoromethyl)pyridin-2-yl]piperazin-1-yl}-1H-benzimidazol-7-amine (108 mg, 0.25 mmol, Example 58), 2,2-dimethyl-3-hydroxypropionic acid (47 mg, 0.4 mmol, Aldrich), 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride (76 mg, 0.4 mmol, Aldrich) and dichloromethane (5 mL). The reaction mixture was stirred at room temperature for 36 h, washed with satd aq. NaHCO3 solution (10 mL), dried over Na2SO4, and filtered. The filtrate was evaporated and the residue was purified by silica gel column chromatography, eluting with 50% EtOAc/hexane to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 531 (M+1)
5-(Trifluoromethyl)-2-{4-[3-(trifluoromethyl)pyridin-2-yl]piperazin-1-yl}-1H-benzimidazol-7-amine (43 mg, 0.1 mmol, Example 58) was reacted with 3-hydroxy-butyric acid (10 mg, 0.1 mmol, Aldrich) under the conditions of Example 65, and the crude product purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 517 (M+1).
2-Chloro-6-(trifluoromethyl)-4-(3,4,5-trifluorophenyl)-1H-benzoimidazole (52 mg, 0.15 mmol, Example 51b) reacted with (3R)-1-(3-bromopyridin-2-yl)-3-methylpiperazine (48 mg, 0.2 mmol, Example 43a) under the conditions of Example 3c to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 570 (M+1).
A mixture of 3-bromo-2-chloropyridine (0.76 g, 4 mmol, Aldrich) and (S)-(+)-2-methylpiperazine (0.6 g. 6 mmol, Aldrich) reacted under the conditions of Example 3c to give the title compound as a light-brown solid. MS (ESI, pos. ion) m/z: 256 (M+1).
The piperazine from step (a) above (51 mg, 0.2 mmol) reacted with 2-chloro-6-(trifluoromethyl)-4-(3,4,5-trifluorophenyl)-1H-benzoimidazole (53 mg, 0.15 mmol, Example 51b) under the conditions of Example 3c to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 570 (M+1).
A mixture of 4-(3,5,6-trifluoro-pyridin-2-yl)-piperazine-1-carboxylic acid tert-butyl ester (1.59 g, 5 mmol, Example 39a), potassium phthalimide (0.93 g, 5 mmol, Aldrich) in DMF (20 mL) was heated at 140° C. with stirring for 16 h. The reaction mixture was cooled to room temperature, diluted with water (60 mL) and extracted with EtOAc (2×70 mL). The combined organic extracts were dried over Na2SO4, and filtered. The filtrate was evaporated and the residue was purified by silica gel column chromatography, eluting with 20% EtOAc in hexane to give the title compound as a yellow solid. MS (ESI, pos. ion) m/z: 315 (M+1).
tert-Butyl 4-(6-amino-3,5-difluoropyridin-2-yl)piperazine-1-carboxylate (133 mg, 0.42 mmol) was reacted under the conditions of Example 39c to give the title compound as a yellow oil. MS (ESI, pos. ion) m/z: 215 (M+1).
The piperazine from step (a) above (74 mg, 0.35 mmol) reacted with 2-chloro-6-(trifluoromethyl)-4-(3,4,5-trifluorophenyl)-1H-benzoimidazole (87 mg, 0.25 mmol, Example 51b) under the conditions of Example 3c to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 529 (M+1).
4-Bromo-6-trifluoromethyl-2-[4-(3-trifluoromethylpyridin-2-yl)piperazin-1-yl]-1H-benzoimidazole (495 mg, 1 mmol, Example 7) and 2,2-dimethyl-N-[3-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)pyridin-2-yl]propanamide (456 mg, 1.5 mmol, CBRD) reacted under the conditions of Example 54, and the crude product was purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 592 (M+1).
A mixture of 2,2-dimethyl-N-[3-(5-(trifluoromethyl)-2-{4-[3-(trifluoromethyl)pyridin-2-yl]piperazin-1-yl}-1H-benzimidazol-7-yl)pyridin-2-yl]propanamide, trifluoroacetic acid salt (118 mg, 0.2 mmol, Example 70), 4 N HCl in dioxane (4 mL) and H2O (4 mL) was heated at 80° C. with stirring overnight. The mixture was cooled to room temperature, concentrated in vacuo and the residue dissolved in EtOAc (50 mL). The solution was washed with 2 N NaOH (2×20 mL) and satd NaCl (40 mL), dried over MgSO4 and filtered. The filtrate was evaporated in vacuo and the residue was purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as a white amorphous solid MS (ESI, pos. ion) m/z: 508 (M+1).
4-Bromo-2-chloro-6-trifluoromethyl-1H-benzoimidazole (180 mg, 0.6 mmol, Example 6b) reacted with (5-chloro-6-piperazin-1-yl-pyridin-3-yl)methanol (228 mg, 1 mmol, Example 60a) under the conditions of Example 3c to give the title compound as a white solid. MS (ESI, pos. ion) m/z: 490 (M+1).
(6-{4-[7-Bromo-5-(trifluoromethyl)-1H-benzimidazol-2-yl]piperazin-1-yl}-5-chloropyridin-3-yl)methanol from step (a) above (98 mg, 0.2 mmol) and 3-fluoro-4-methoxyphenylboronic acid (43 mg, 0.25 mmol, Aldrich) reacted under the conditions of Example 51 to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 536 (M+1).
2-Chloro-6-(trifluoromethyl)-4-(3,4,5-trifluorophenyl)-1H-benzoimidazole (350 mg, 1 mmol, Example 51b) reacted with (S)-(+)-2-methylpiperazine (150 mg. 1.5 mmol, Aldrich) under the conditions of Example 3c to give the title compound as a light-brown solid. MS (ESI, pos. ion) m/z: 415 (M+1).
The piperazine from step (a) above (41 mg, 0.1 mmol) reacted with 3-bromo-2-chloropyridine (19 mg, 0.1 mmol, Aldrich) under the conditions of Example 48b to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 570 (M+1).
A mixture of 2,3-dichloropyridine (0.74 g, 5 mmol, Aldrich) and (R)-(−)-2-methylpiperazine (0.6 g. 6 mmol, Aldrich) reacted under the conditions of Example 43a to give the title compound as a off-white solid. MS (ESI, pos. ion) m/z: 212 (M+1).
The piperazine from step (a) above (84 mg. 0.4 mmol) reacted with 2-chloro-6-(trifluoromethyl)-4-(3,4,5-trifluorophenyl)-1H-benzoimidazole (105 mg, 0.3 mmol, Example 51b) under the conditions of Example 3c to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 526 (M+1).
The title compound was prepared from 4-bromo-6-trifluoromethyl-2-[4-(3-trifluoromethyl-pyridin-2-yl)-piperazin-1-yl]-1H-benzoimidazole (Example 7) and 4-aminomethylphenylboronic acid hydrochloride (Acros) under the conditions of Example 51a and isolated as a white amorphous solid. MS (ESI, pos. ion) m/z: 521 (M+1).
To a mixture of 4-(5-(trifluoromethyl)-2-{4-[3-(trifluoromethyl)pyridin-2-yl]piperazin-1-yl}-1H-benzimidazol-7-yl)benzylamine (172 mg, 0.33 mmol, Example 75) and acetone (1 mL) in chloroform (5 mL) were added NaBH(OAc)3 (211 mg, 1 mmol) and one drop of acetic acid. The mixture was stirred at room temperature for 2 h, diluted with dichloromethane (30 mL), washed with satd aq. NaHCO3 solution (25 mL), dried over Na2SO4, and filtered. The filtrate was evaporated and the residue was purified by silica gel column chromatography, eluting with 5% MeOH in dichloromethane to give the title compound as white amorphous solid. MS (ESI, pos. ion) m/z: 563 (M+1), (ESI, neg. ion)
4-Bromo-2-chloro-6-trifluoromethyl-1H-benzoimidazole (1.2 g, 4 mmol, Example 6b) reacted with (3R)-1-(3-chloropyridin-2-yl)-3-methylpiperazine (0.95 g, 4.5 mmol, Example 74a) under the conditions of Example 3c to give the title compound as a light-yellow solid. MS (ESI, pos. ion) m/z: 474 (M+1).
7-Bromo-2-[(2R)-4-(3-chloropyridin-2-yl)-2-methylpiperazin-1-yl]-5-(trifluoromethyl)-1H-benzoimidazole (95 mg, 0.2 mmol, Example 77) and 3-fluoro-4-methoxyphenylboronic acid (43 mg, 0.25 mmol, Aldrich) reacted under the conditions of Example 51a to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 520 (M+1).
A mixture of 2-chloro-3-trifluoromethylpyridine (1.45 g, 8 mmol, Aldrich) and (R)-(−)-2-methylpiperazine (1.0 g. 10 mmol, Aldrich) was reacted under the conditions of Example 43a to give the title compound as a off-white solid. MS (ESI, pos. ion) m/z: 246 (M+1).
The piperazine from step (a) above (0.37 g, 1.5 mmol) reacted with 4-bromo-2-chloro-6-trifluoromethyl-1H-benzoimidazole (0.36 g, 1.2 mmol, Example 6b) under the conditions of Example 3c to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 508 (M+1).
7-Bromo-2-{(2R)-2-methyl-4-[3-(trifluoromethyl)pyridin-2-yl]piperazin-1-yl}-5-(trifluoromethyl)-1H-benzoimidazole (152 mg, 0.3 mmol, Example 79) and 3,4,5-trifluorophenylboronic acid (88 mg, 0.5 mmol, Lancaster) reacted under the conditions of Example 51a to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 560 (M+1).
7-Bromo-2-{(2R)-2-methyl-4-[3-(trifluoromethyl)pyridin-2-yl]piperazin-1-yl}-5-(trifluoromethyl)-1H-benzoimidazole (152 mg, 0.3 mmol, Example 79) and 4-dimethylaminophenylboronic acid (83 mg, 0.5 mmol, Aldrich) reacted under the conditions of Example 51a to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 549 (M+1).
To a solution of 5-(trifluoromethyl)-2-{4-[3-(trifluoromethyl)(2-pyridyl)]piperazinyl}benzoimidazole (415 mg, 1.0 mmol, Example 53) in anhydrous DMF (5 mL, Aldrich) was added sodium hydride (72 mg, 50% in mineral oil, 1.5 mmol, Aldrich) at 0° C. The reaction mixture was stirred at room temperature for 0.5 h. After the mixture was cooled to 0° C., it was treated with benzyl bromide (171 mg, 1.0 mmol, Aldrich) and stirred at room temperature for 16 h. The reaction was then quenched with saturated aqueous solution of NaHCO3 (30 mL) and extracted with EtOAc (2×50 mL). The combined organic extracts were dried over MgSO4, filtered and concentrated in vacuo. The residue was purified by silica gel column chromatography (25% EtOAc/hexane) to give the title compound as white solid. MS (ESI, pos. ion) m/z: 506.2 (M+1).
The title compound was obtained as a second product of the reaction described in Example 82 and isolated as a white solid. Yield 84.3 mg (16.7%). M.p. 154.3-157.1° C. MS (ESI, pos. ion) m/z: 506.2 (M+1).
To a solution of 5-chloro-2-nitro-4-(trifluoromethyl)phenylamine (2 g, 8.3 mmol, Oakwood) in EtOAc (26 mL) and EtOH (13 mL) was added tin (II) chloride dihydrate (13.1 g, 45 mmol, Aldrich). The reaction mixture was stirred at 70° C. for 1 h. The light-yellow reaction solution was poured to crushed ice (50 mL) and carefully neutralized using saturated aqueous solution of NaHCO3. The resulting suspension was extracted with EtOAc (3×60 mL). The combined organic extracts were dried over MgSO4, filtered and the filtrate evaporatedcon in vacuo to give the title compound as white solid, which was used in the next step without additional purification. MS (ESI, pos. ion) m/z: 211.4 (M+1).
The benzene-1,2-diamine from step (a) above (1.68 g, 8.0 mmol) reacted under the conditions of Example 1b to give the title compound as a white solid. MS (ESI, pos. ion) m/z: 237.6 (M+1).
The benzoimidazol-2-one from step (b) above (1.43 g, 6.0 mmol) reacted with POCl3 under the conditions of Example 1c to give the title compound as a white solid. MS (ESI, pos. ion) m/z: 254.9 (M+1).
The benzoimidazole from step (c) above (255 mg, 1.0 mmol) reacted with 1-(3-trifluoromethylpyridin-2-yl)piperazine (231 mg, 1.0 mmol, Oakwood) under the conditions of Example 3c to give the title compound as a white solid. M.p. 206.4-208.1° C. MS (ESI, pos. ion) m/z: 450.4 (M+1).
2,5-Dichloro-6-(trifluoromethyl)benzoimidazole (255 mg, 1.0 mmol, Example 84c) reacted with 1-(3,5-dichloropyridin-2-yl)piperazine (232 mg, 1.0 mmol, Example 9a) under the conditions of Example 3c to give the title compound as a white solid. M.p. 93.5-196.4° C. MS (ESI, pos. ion) m/z: 452.0, 454.1 (M+1).
2,5-Dichloro-6-(trifluoromethyl)benzoimidazole (255 mg, 1.0 mmol, Example 84c) reacted with 1-(3-chloropyridin-2-yl)piperazine hydrochloride (233 mg, 1.0 mmol, Example 3b) under the conditions of Example 3c to give the title compound as a white solid. M.p. 208.9-211.0° C. MS (ESI, pos. ion) m/z: 416.3, 420.1 (M+1).
The 5-chloro-4-methylbenzene-1,2-diamine (10 g, 64 mmol, Aldrich) reacted under the conditions of Example 1b to give the title compound as a dark brown solid. MS (ESI, pos. ion) m/z: 183.0 (M+1).
The benzimidazol-2-one from step (a) above (10.6 g, 58 mmol) reacted with POCl3 under the conditions of Example 1c to give the title compound as a brown solid. MS (ESI, pos. ion) m/z: 201.3 (M+1).
The benzoimidazole from step (b) above (201 mg, 1.0 mmol) reacted with 1-(3-trifluoromethylpyridin-2-yl)piperazine (231 mg, 1.0 mmol, Oakwood) under the conditions of Example 3c to give the title compound as a white solid. MS (ESI, pos. ion) m/z: 396.1 (M+1).
To a mixture of 3,4-difluorophenylboronic acid (111 mg, 0.7 mmol, Aldrich) and 6-bromo-2-[4-(3-trifluoromethylpyridin-2-yl)piperazin-1-yl]-1H-benzoimidazole (213 mg, 0.5 mmol, Example 23c) in ethylene glycol dimethyl ether (2 mL) were added lithium chloride (63 mg, 1.5 mmol, Aldrich) and 2M aqueous sodium carbonate (0.75 mL, 1.5 mmol). Nitrogen gas was bubbled through the mixture for 10 min and tetrakis(triphenylphosphine)palladium (58 mg, 0.05 mmol, Aldrich) was added. The reaction mixture was stirred at 80° C. under nitrogen atmosphere for 16 h, cooled to room temperature, diluted with EtOAc (50 mL) and filtered through Celite® pad. The filtrate was washed with water and brine, dried over MgSO4, filtered and concentrated in vacuo. The residue was purified by silica gel column chromatography (55% EtOAc/hexane) to give the title compound as a white solid. MS (ESI, pos. ion) m/z: 460.2 (M+1).
A mixture of 4-bromo-3-(trifluoromethyl)phenylamine (7.2 g, 30 mmol, Aldrich) and acetic anhydride (29 mL) was stirred at room temperature for 16 h. The reaction mixture was evaporated in vacuo to give the title product as a white solid which was used in the next step without additional purification. MS (ESI, pos. ion) m/z: 484.0 (M+1).
To a solution of the acetamide from step (a) above (8.46 g, 30 mmol) in concentrated sulfuric acid (32.5 mL) was added dropwise concentrated HNO3 (4.1 mL, 90%. J. T. Baker) with stirring at 0° C. The resulting solution was stirred at room temperature for 3 h and poured into crushed ice (80 mL). The mixture was carefully neutralized with solid NaHCO3 and extracted with EtOAc (3×200 mL). The combined organic extracts were washed with water and brine, dried over MgSO4, filtered and concentrated in vacuo. The residue was purified by silica gel column chromatography (25% EtOAc/hexane) to give the title compound as a yellow solid. MS (ESI, neg. ion) m/z: 325.0 (M−1).
To a solution of the acetamide from step (b) above (4.5 g, 14 mmol) in MeOH (8 mL) was added aqueous 3N NaOH (50 mL) at room temperature. The reaction mixture was stirred at 90° C. for 2 h, cooled to room temperature and extracted with EtOAc (4×50 mL). The combined organic extracts were washed with 1% aqueous HCl and brine, dried over MgSO4, filtered and concentrated in vacuo. The residue was purified by silica gel column chromatography (15% EtOAc/hexane) to give the title compound as a yellow solid. MS (ESI, neg. ion) m/z: 282.9 (M−1).
The reaction of 4-bromo-2-nitro-5-(trifluoromethyl)phenylamine from step (c) above (3.3 g, 10 mmol) under the conditions of Example 84a afforded the title compound as a brown solid. MS (ESI, pos. ion) m/z: 257.0 (M+1).
5-Bromo-4-(trifluoromethyl)benzene-1,2-diamine from step (d) above (1.25 g, 5 mmol) reacted under the conditions of Example 1b to give the title compound as a light-yellow solid. MS (ESI, pos. ion) m/z: 283.0 (M+1).
5-Bromo-6-methyl-1,3-dihydro-benzoimidazol-2-one from step (e) above (1.36 g, 4.85 mmol) reacted with POCl3 under the conditions of Example 1c to give the title compound as a white solid. MS (ESI, pos. ion) m/z: 300.8, 302.7 (M+1).
The benzoimidazole from step (f) above (1.2 g, 4.0 mmol) reacted with 1-(3-trifluoromethylpyridin-2-yl)piperazine (1.4 g, 6.0 mmol, Oakwood) under the conditions of Example 3c to give the title compound as a white solid. MS (ESI, pos. ion) m/z: 496.0 (M+1).
The reaction of 5-bromo-2-chloro-6-(trifluoromethyl)benzoimidazole (100 mg, 0.3 mmol, Example 89f) with 1-(3-chloropyridin-2-yl)piperazine hydrochloride (186 mg, 0.61 mmol, Example 3b) under the conditions of Example 3c afforded the title compound as a white solid. MS (ESI, pos. ion) m/z: 461.7, 464.0 (M+1).
The reaction of 5-bromo-6-trifluoromethyl-2-[4-(3-trifluoromethyl-pyridin-2-yl)-piperazin-1-yl]-1H-benzoimidazole (250 mg, 0.5 mmol, Example 89 g) with 3,4-difluorophenylboronic acid (95 mg, 0.60 mmol, Aldrich) under the conditions of Example 88 afforded the title compound as a white solid. MS (ESI, pos. ion) m/z: 528.0 (M+1).
A solution of 1-(5-chloropyrimidin-4-yl)piperazine, trifluoroacetic acid salt (0.62 g, 1.45 mmol, Example 33d), 2-chloro-6-trifluoromethyl-1H-benzoimidazole (0.32 g, 1.45 mmol, Example 1c) and i-Pr2NEt (0.76 mL, 4.35 mmol) in DMSO (10 mL) was heated to 80° C. for 16 h. The reaction mixture was cooled to room temperature, diluted with EtOAc (50 mL), washed with satd. aq. NaHCO3 (25 mL) and brine (25 mL), dried over Na2SO4, filtered and concentrated in vacuo. The crude product was purified by silica gel column chromatography (50% EtOAc in hexane to EtOAc) to give the title compound as white solid. M.p. 66.6-66.7° C. MS (ESI, pos. ion) m/z: 383 (M+1). Anal. Calcd for C16H14ClF3N6.0.75H2O: C, 48.43; H, 3.97; N, 20.84. Found: C, 48.30; H, 3.86; N, 20.47.
5-Chloro-4-piperazin-1-yl-pyrimidine; trifluoroacetic acid salt (0.32 g, 0.75 mmol, Example 33d) and 5-bromo-2-chloro-6-trifluoromethyl-1H-benzoimidazole (0.226 g, 0.75 mmol, Example 89f) reacted under the conditions of Example 3c to give the title compound as a white solid. M.p. 229.7-233.2° C. MS (ESI, pos. ion) m/z: 461.0 (M+1).
5,6-Dichloro-nicotinic acid (5.0 g, 0.026 mol, Aldrich) reacted with piperazine-1-carboxylic acid tert-butyl ester (4.87 g, 0.026 mol, Aldrich) under the conditions of Example 3a to give the title compound as yellow semi-solid, which was used in the next step without further purification. MS (ESI, neg. ion) m/z: 340 (M−1).
To a mixture of 4-(5-carboxy-3-chloro-pyridin-2-yl)-piperazine-1-carboxylic acid tert-butyl ester from step (a) above (1.1 g, 3.22 mmol) and K2CO3 (0.67 g, 4.83 mmol) in DMF (10 mL) was added dropwise MeI (0.3 mL, 4.83 mmol) with stirring at room temperature. The reaction mixture was stirred at room temperature for 16 h, quenched with 20 mL of satd. aq. solution of NaHCO3 and extracted with EtOAc (50 mL). The organic extract was washed with brine (20 mL), dried over Na2SO4, filtered and concentrated in vacuo. The residue was purified by column chromatography (gradient 30% to 50% EtOAc in hexane) to give the title compound as white solid.
A mixture of 4-(3-chloro-5-methoxycarbonyl-pyridin-2-yl)-piperazine-1-carboxylic acid tert-butyl ester from step (b) above and satd. solution of HCl in EtOAc (20 mL) was stirred at room temperature for 2 h. The solution was concentrated in vacuo and the residue was washed with 50% EtOAc in hexane, and dried in vacuo to give the title compound as a white solid. MS (ESI, pos. ion) m/z: 256 (M+1).
A solution of 5-chloro-6-piperazin-1-yl-nicotinic acid methyl ester, HCl salt from step (c) above (0.13 g, 0.4 mmol), 2-chloro-6-trifluoromethyl-1H-benzoimidazole (88 mg, 0.4 mmol, Example 1c) and i-Pr2NEt (0.21 mL, 1.2 mmol) in dioxane (2 mL) was subjected to microwave irradiation at 190° C. for 45 min. The solution was cooled to room temperature, diluted with EtOAc (100 mL), washed with saturated aqueous solution of NaHCO3 (50 mL) and brine (50 mL), dried over Na2SO4, filtered and concentrated in vacuo. The residue was purified by silica gel column chromatography (30% EtOAc in hexane) to give the title compound as a white solid. M.p. 152.8-159.3° C. MS (ESI, pos. ion) m/z: 440 (M+1). Anal. Calcd for C19H17ClF3N5O2: C, 51.89; H, 3.90; N, 15.92; Cl, 8.06. Found: C, 51.72; H, 3.86; N, 15.92, Cl, 8.16.
To a solution of 4-(5-carboxy-3-chloro-pyridin-2-yl)-piperazine-1-carboxylic acid tert-butyl ester (0.6 g, 1.7 mmol, Example 94a) and 2,3,4,5,6-pentafluorophenol (0.33 g, 1.76 mmol, Aldrich) in EtOAc (15 mL) was added 1,3-dicyclohexylcarbodiimide (0.351 g 1.7 mmol) at 0° C. The reaction mixture was stirred for 16 h at room temperature, diluted with EtOAc (50 mL) and filtered through a Celite® pad. The filtrate was washed with satd. solution of NaHCO3 (25 mL) and brine (25 mL), dried over Na2SO4, filtered and evaporated in vacuo to give the title compound as a yellow wax. MS (ESI, pos. ion) m/z: 508 (M+1).
A mixture of 4-(3-chloro-5-pentafluorophenyloxycarbonyl-pyridin-2-yl)-piperazine-1-carboxylic acid tert-butyl ester from step (a) above (0.9 g, 1.77 mmol) and 2M MeNH2 in THF (9 mL, 18 mmol, Aldrich) was stirred at room temperature for 6 h. The solution was concentrated in vacuo and the residue was purified by silica gel column chromatography (gradient 30% to 50% EtOAc in hexane) to give the title compound as colorless oil. MS (ESI, pos. ion) m/z: 355 (M+1).
A mixture of 4-(3-chloro-5-methylcarbamoyl-pyridin-2-yl)-piperazine-1-carboxylic acid tert-butyl ester from step (b) above (0.31 g, 0.87 mmol) and satd. HCl in EtOAc (10 mL) was stirred at room temperature for 3 h. The solution was concentrated in vacuo and the residue was washed with 50% EtOAc in hexane, and dried in vacuo to give the title compound as white solid. MS (ESI, pos. ion) m/z: 256 (M+1).
5-Chloro-N-methyl-6-piperazin-1-yl-nicotinamide, HCl salt from step (c) above (0.12 g, 0.37 mmol) and 2-chloro-6-trifluoromethyl-1H-benzoimidazole (82 mg, 0.37 mmol, Example 1c) reacted under the conditions of Example 94d to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 439 (M+1).
A mixture of 5,6-dichloro-nicotinic acid (7.0 g, 0.036 mol, Aldrich), (COCl)2 (50 mL, Aldrich) and DMF (2 drops) was stirred at room temperature for 4 h. The solution was evaporated in vacuo to give the title compound as an orange solid.
A solution of 5,6-dichloro-nicotinoyl chloride from step (a) above (1.73 g, 8.22 mmol)) in CH2Cl2 (50 mL) was added to a mixture of 28% aq. NH4OH (20 mL), water (20 mL) and CH2Cl2 (50 mL), and vigorously stirred at room temperature for 2 h. The organic phase was separated, washed with brine (50 mL), dried over Na2SO4, filtered and concentrated in vacuo to give the title compound as a white solid. MS (ESI, pos. ion) m/z: 191 (M+1).
The nicotinamide from step (b) above (1.3 g, 6.8 mmol) and piperazine-1-carboxylic acid tert-butyl ester (1.27 g, 6.8 mmol, Aldrich) reacted under the conditions Example 3a to give the title compound as a light-yellow solid. MS (ESI, pos. ion) m/z: 341 (M+1).
The 4-(5-carbamoyl-3-chloro-pyridin-2-yl)-piperazine-1-carboxylic acid tert-butyl ester from step (c) above (0.8 g, 2.35 mmol) reacted under the conditions of Example 4c to give the title compound as an orange oil.
5-Chloro-6-piperazin-1-yl-nicotinamide, trifluoroacetic acid salt from step (d) above (0.3 g, 0.64 mmol) reacted with 2-chloro-6-trifluoromethyl-1H-benzoimidazole (0.141 g, 0.64 mmol, Example 1c) under the conditions of Example 94d to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 424 (M+1).
A solution of 5,6-dichloro-nicotinoyl chloride (3.24 g, 0.0154 mol, Example 96a) in CH2Cl2 (20 mL) was added dropwise to a mixture of O,N-dimethyl-hydroxylamine, HCl salt (1.5 g, 15.4 mmol, Aldrich), 10% aq. K2CO3 (20 mL) and CH2Cl2 (50 mL) and vigorously stirred at room temperature for 3 h. The organic phase was separated, washed with brine (50 mL), dried over Na2SO4, filtered and concentrated in vacuo. The residue was purified by silica gel column chromatography (EtOAc) to give the title compound as a white solid. MS (ESI, pos. ion) m/z: 257 (M+Na+).
5,6-Dichloro-N-methoxy-N-methyl-nicotinamide from step (a) above (3.2 g, 1.36 mmol) reacted with piperazine-1-carboxylic acid tert-butyl ester (2.53 g, 1.36 mmol, Aldrich) under the conditions of Example 3a to give the title compound as a white solid. MS (ESI, pos. ion) m/z: 385 (M+1).
To a solution of 4-[3-chloro-5-(methoxy-methyl-carbamoyl)-pyridin-2-yl]-piperazine-1-carboxylic acid tert-butyl ester from step (b) above (1.0 g, 2.6 mmol) in anhydrous THF (20 mL) was added MeMgBr (2.6 mL, 3M solution in Et2O, 7.8 mmol, Aldrich) with stirring at 0° C. The reaction mixture was stirred at room temperature for 4 h and poured into satd. aq. NaHCO3 solution (20 mL). After the addition of EtOAc (50 mL), the mixture was washed with brine (20 mL), dried over Na2SO4, filtered, and concentrated in vacuo. The residue was purified by silica gel column chromatography (70% EtOAc in hexane) to give the title compound as a white solid. MS (ESI, pos. ion) m/z: 340 (M+1).
A mixture of 4-(5-acetyl-3-chloro-pyridin-2-yl)-piperazine-1-carboxylic acid tert-butyl ester from step (c) above (0.65 g, 1.92 mmol) and satd. solution of HCl in EtOAc (50 mL) was stirred at room temperature for 4 h. The solution was evaporated in vacuo to give the title compound as a white solid. MS (ESI, pos. ion) m/z: 240 (M+1).
1-(5-Chloro-6-piperazin-1-yl-pyridin-3-yl)-ethanone, hydrochloride from step (d) above (0.6 g, 1.92 mmol) reacted with 2-chloro-6-trifluoromethyl-1H-benzoimidazole (0.423 g, 1.92 mmol, Example 1c) under the conditions of Example 94d to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 424 (M+1).
To a solution of 1-{5-chloro-6-[4-(6-trifluoromethyl-1H-benzoimidazol-2-yl)-piperazin-1-yl]-pyridin-3-yl}-ethanone (0.3 g, 0.71 mmol, Example 97e) in MeOH (20 mL) was added portionwise NaBH4 (0.037 g, 1.0 mmol, Aldrich) with stirring at 0° C. The reaction mixture was stirred at 0° C. for 30 min, quenched with 20 mL of satd. aq. NaHCO3, and diluted with EtOAc (50 mL). The organic phase was separated, washed with brine (20 mL), dried over Na2SO4, filtered and concentrated in vacuo. The residue was recrystallized from 1:1 EtOAc/hexane mixture to give the title compound as a white foam. MS (ESI, pos. ion) m/z: 426 (M+1).
4-(3-Chloro-phenyl)-piperidin-4-ol (0.25 g, 1.18 mmol, Aldrich) reacted with 2-chloro-6-trifluoromethyl-1H-benzoimidazole (0.26 g, 1.18 mmol, Example 1c) under the conditions of Example 94d to give the title compound as a white solid. M.p. 246.7-247.4° C. MS (ESI, pos. ion) m/z: 424 (M+1).
To a 250-mL, round-bottomed flask was added 5-trifluoromethyl-pyridin-2-ylamine (8.3 g, 51.2 mmol, Matrix Scientific) and H2SO4 (49 mL). The resulting mixture was cooled to 0° C., and HNO3 (8.2 mL) was added dropwise. The mixture was heated to 80° C. for 48 h, cooled to room temperature and added dropwise into a vigorously stirred ice-water (500 mL). After the addition, the mixture was basified to pH 9 with ION NaOH and extracted with EtOAc (2×500 mL). The combined organic extracts were dried over MgSO4 and filtered. The solvent was removed in vacuo and the residue was purified by silica gel column chromatography, eluting with EtOAc/hexane (1:2) to give the title compound as a yellow solid. MS (ESI, positive ion) m/z: 208 (M+1).
A mixture of 3-nitro-5-trifluoromethyl-pyridin-2-ylamine from step (a) above (1.2 g, 5.59 mmol), tin (TI) chloride dihydrate (3.9 g, 17.3 mmol, Aldrich), and DMF (19 mL) was heated to 60° C. for 4 h. The reaction mixture was cooled to room temperature and NaHCO3 (150 mL) was added. The mixture was stirred for 0.5 h, diluted with EtOAc (300 mL), stirred for 0.5 h and filtered. The organic layer was separated and the aqueous layer was extracted with EtOAc (2×300 mL). The combined organic extracts were dried over MgSO4 and filtered. The solvent was removed in vacuo to give the title compound, which was used in the next step without additional purification. MS (ESI, positive ion) m/z: 178 (M+1).
A mixture of 5-trifluoromethyl-pyridine-2,3-diamine from step (b) above and N,N-carbonyldiimidazole (938 mg, 579 mmol, Aldrich) in THF (10 mL) was stirred at room temperature for 16 h. The reaction mixture was diluted with H2O (20 mL) and extracted with EtOAc (2×30 mL). The combined organic extracts were concentrated in vacuo and the residue was purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound. MS (ESI positive ion) m/z: 204 (M+1).
A solution of 6-trifluoromethyl-1,3-dihydro-imidazo[4,5-b]pyridin-2-one from step (c) above (161 mg, 0.789 mmol) in POCl3 (5 mL) was heated at 95° C. for 16 h. The reaction mixture was cooled to room temperature, the solvent was removed in vacuo and the resulting oily residue was purified by silica gel column chromatography, eluting with EtOAc/hexane (1:3) to give the title compound as a light-yellow solid. MS (ESI positive ion) m/z: 222 (M+1).
A mixture of 2-chloro-6-trifluoromethyl-1H-imidazo[4,5-b]pyridine from step (d) above (45 mg, 0.203 mmol), 1-(3-trifluoromethyl-pyridin-2-yl)-piperazine (47 mg, 0.203 mmol, Fluorochem), triethylamine (59 μL, 0.406 mmol, Aldrich) and copper(I) iodide (1 mg, 0.005 mmol, Aldrich) in 3-methyl-butan-1-ol (0.5 mL, Aldrich) was subjected to microwave irradiation at 220° C. for 0.5 h. The reaction mixture was cooled to room temperature and was filtered. The filtrate was purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as a colorless solid. MS (ESI, positive ion) m/z: 417 (M+1).
A mixture of 2-chloro-5-trifluoromethyl-1H-benzoimidazole (1 g, 4.52 mmol, Example 1c), triethylamine (1.3 mL, 9.04 mmol, Aldrich) and (2-chloromethoxy-ethyl)-trimethyl-silane (881 μL, 4.98 mmol, Aldrich) in dichloromethane (30 mL) was stirred at room temperature for 16 h. Water (150 mL) was added, and the mixture was extracted with dichloromethane (2×150 mL). The combined organic extracts were dried over MgSO4 and filtered. The solvent was removed in vacuo and the residue was purified by silica gel column chromatography, eluting with hexane/EtOAc (10:1) to give the title compound as an orange solid. MS (ESI, positive ion) m/z: 351 (M+1).
A mixture of piperazin-2-one (4.85 g, 48.47 mmol, Avocado Research), 2-chloro-3-trifluoromethyl-pyridine (8.8 g, 48.47 mmol, TCI America) and diisopropylethylamine (111 mL, 58.16 mmol, Aldrich) in DMSO (160 mL) was heated at 120° C. for 16 h. The mixture was cooled to room temperature, diluted with H2O (500 mL) and extracted with EtOAc (2×500 mL). The combined organic extracts were dried over MgSO4 and filtered. The solvent was removed in vacuo and the residue was purified by silica gel column chromatography, eluting with dichloromethane/MeOH (15:1) to give the title compound as a yellow solid. MS (ESI, positive ion) m/z: 206 (M+1).
A mixture of 2-chloro-5-trifluoromethyl-1-(2-trimethylsilanyl-ethoxymethyl)-1H-benzoimidazole from step (a) above (716 mg, 2 mmol), 4-(3-trifluoromethyl-pyridin-2-yl)-piperazin-2-one from step (b) above (500 mg, 2 mmol), tris(dibenzylideneacetone) dipalladium (0) chloroform adduct (207 mg, 0.2 mmol, Strem Chemicals), 4,5-bis(diphenylphosphino)-9,9-dimethylxanthene (213 mg, 0.4 mmol, Aldrich) and cesium carbonate (978 mg, 3 mmol, Aldrich) in 1,4-dioxane (2 mL) was subjected to microwave irradiation at 160° C. for 1.5 h. The mixture was cooled to room temperature, filtered, and the filtrate was purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as a brown oil. MS (ESI, positive ion) m/z: 560 (M+1).
A solution of 4-(3-trifluoromethyl-pyridin-2-yl)-1-[5-trifluoromethyl-1-(2-trimethylsilanyl-ethoxymethyl)-1H-benzoimidazol-2-yl]-piperazin-2-one from step (c) above (114 mg, 0.2 mmol) in 30% TFA in dichloromethane (3 mL) was stirred at room temperature for 5 h. The solvent was removed in vacuo and the residue was purified by silica gel column chromatography, eluting with EtOAc/hexane (1:3) to give the title compound as a yellow solid. MS (ESI, positive ion) m/z: 430 (M+1).
A mixture of iodomethane (356 μL, 5.71 mmol, Aldrich) and sodium hydride (137 mg, 5.71 mmol, Aldrich) in DMF (19 mL) was stirred at room temperature for 10 min. A solution of 2-hydroxymethyl-piperazine-1,4-dicarboxylic acid 4-benzyl ester 1-tert-butyl ester (2 g, 5.71 mmol, Monomerchem Inc.) in DMF (19 mL) was added dropwise, and the mixture was stirred at room temperature for 0.5 h. The reaction mixture was diluted with H2O (300 mL) and extracted with EtOAc (2×400 mL). The combined organic extracts were concentrated in vacuo and the residue was dissolved in 30% TFA in dichloromethane (40 mL). The solution was stirred at room temperature for 0.5 h and the solvent was removed in vacuo. Methanol (10 mL) was added to the residue and the mixture was filtered. The filtrate was purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as a colorless oil. MS (ESI, positive ion) m/z: 265 (M+1).
2-Chloro-5-trifluoromethyl-1H-benzoimidazole (703 mg, 3.18 mmol, Example 1c) and 3-methoxymethyl-piperazine-1-carboxylic acid benzyl ester, trifluoroacetic acid salt from step (a) above (840 mg, 3.18 mmol) reacted under the conditions of Example 10e to give the title compound as a yellow oil. MS (ESI, positive ion) m/z: 449 (M+1).
To a solution of 3-methoxymethyl-4-(5-trifluoromethyl-1H-benzoimidazol-2-yl)-piperazine-1-carboxylic acid benzyl ester, trifluoroacetic acid salt from step (b) above (216 mg, 0.482 mmol) in methanol (3.2 mL, Aldrich) was added palladium, 10 wt % on activated carbon (30 mg, Aldrich). The mixture was stirred under hydrogen for 16 h and filtered through a Celite® pad. The filtrate was concentrated in vacuo to give the title compound as a yellow oil, which was used in next step without purification. MS (ESI, positive ion) m/z: 315 (M+1).
2-(2-Methoxymethyl-piperazin-1-yl)-5-trifluoromethyl-1H-benzoimidazole, trifluoroacetic acid salt from step (c) above and 2-chloro-3-trifluoromethyl-pyridine (100 mg, 0.55 mmol, TCI America) reacted under the condition of Example 10e to give the title compound as a light-yellow oil. MS (ESI, positive ion) m/z: 460 (M+1).
4-Bromo-6-trifluoromethyl-2-[4-(3-trifluoromethylpyridin-2-yl)piperazin-1-yl]-1H-benzoimidazole (1.99 g, 4 mmol, Example 7) reacted with 3,4,5-trifluorophenylboronic acid (1.1 g, 6 mmol, Lancaster) under the conditions of Example 51a to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 546 (M+1).
A solution of 6-trifluoromethyl-2-[4-(3-trifluoromethyl-pyridin-2-yl)-piperazin-1-yl]-4-(3,4,5-trifluoro-phenyl)-1H-benzoimidazole (42 mg, 0.08 mmol) in MeOH (4.5 mL) and anhydrous HCl (0.175 mL, 0.70 mmol, 4M in dioxane, Aldrich) was stirred with 10% Pd/C (20 mg, Aldrich) under hydrogen at atmospheric pressure and at room temperature for 18 h. The palladium catalyst was removed by filtration over a Celite® pad. The filtrates were concentrated in vacuo and the residue was dissolved in MeOH (0.75 mL), and purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 550 (M+1).
2-piperazine (429 mg, 4.99 mmol, Aldrich) and 2-chloro-5-trifluoromethyl-7-(3,4,5-trifluoro-phenyl)-1H-benzoimidazole (582 mg, 1.66 mmol, Example 51b) reacted under the conditions of Example 100e to give the title compound as a yellow solid. MS (ESI, positive ion) m/z: 401 (M+1).
A mixture of 2-piperazin-1-yl-6-trifluoromethyl-4-(3,4,5-trifluoro-phenyl)-1H-benzoimidazole from step (a) above (50 mg, 0.13 mmol), 3-(2,2-dimethyl-propionylamino)-pyridine-2-carboxylic acid (42 mg, 0.19 mmol, Maybridge), PS-carbodiimide (146 mg, 0.187 mmol, Argonaut Technologies Inc.) and HOAt (8.5 mg, 0.062 mmol, Perseptive Biosystems) in a 1:1 solution of DMF/dichloromethane (0.9 mL) was stirred at room temperature for 16 h. The mixture was filtered and the resin was washed with a solution of MeOH/dichloromethane (1:1) (2×2 mL). The filtrate was concentrated in vacuo and the residue was purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as a colorless solid. MS (ESI, positive ion) m/z: 605 (M+1).
A mixture of 2-piperazin-1-yl-6-trifluoromethyl-4-(3,4,5-trifluoro-phenyl)-1H-benzoimidazole (100 mg, 0.25 mmol, Example 104a), 2-(1-tert-butoxycarbonylpiperazin-4-yl)propionic acid hydrochloride (110 mg, 0.38 mmol, Chess), PS-carbodiimide (292 mg, 0.38 mmol, Argonaut Technologies Inc.), diisopropylethylamine (65 μL, 0.38 mmol, Aldrich) and HOAt (26 mg, 0.19 mmol, Perseptive Biosystems) in a solution of 1:1 DMF/dichloromethane (1.8 mL) reacted under the condition of Example 104b to give a colorless solid. MS (ESI, positive ion) m/z: 641 (M+1). The solid was dissolved in 30% TFA in dichloromethane (1 mL) and the solution was stirred at room temperature for 0.5 h. The solvent was removed in vacuo and the residue was purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as a colorless solid. MS (ESI, positive ion) m/z: 541 (M+1).
2-piperazin-1-yl-6-trifluoromethyl-4-(3,4,5-trifluoro-phenyl)-1H-benzoimidazole (100 mg, 0.25 mmol, Example 104a) and 1-methyl-piperidine-4-carboxylic acid hydrochloride (67.5 mg, 0.38 mmol, Chess) reacted under the condition of Example 104b to give the title compound as a colorless solid. MS (ESI, positive ion) m/z: 526 (M+1).
2-piperazin-1-yl-6-trifluoromethyl-4-(3,4,5-trifluoro-phenyl)-1H-benzoimidazole (100 mg, 0.25 mmol, Example 104a) and piperidine-1,4-dicarboxylic acid mono-tert-butyl ester (86 mg, 0.38 mmol, Carbogen) reacted under the condition of Example 104b to give the title compound as a colorless solid. MS (ESI, positive ion) m/z: 512 (M+1).
A mixture of 2-piperazin-1-yl-6-trifluoromethyl-4-(3,4,5-trifluoro-phenyl)-1H-benzoimidazole (160 mg, 0.4 mmol, Example 104a), 2-(chloromethyl)pyridine hydrochloride (66 mg, 0.4 mmol, Aldrich) and K2CO3 (61 mg, 0.44 mmol) in DMF (2.7 mL) was stirred at room temperature for 16 h. The solvent was removed in vacuo and MeOH (1 mL) was added to the residue. The mixture was filtered and the filtrate was purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as a white solid. MS (ESI, positive ion) m/z: 492 (M+1).
To a 500-mL, round-bottomed flask was added THF (42 mL) and diisopropylamine (4 mL, 27.6 mmol, Aldrich). The resulting mixture was cooled to −78° C. and n-butyllithium (1.6 M in hexane, 17 mL, Aldrich) was added dropwise over 20 min under nitrogen. After stirring at −78° C. for 45 min, a solution of N-Boc-4-piperidone (5 g, 25 mmol, Aldrich) in THF (42 mL) was added dropwise over 25 min. After stirring for 20 min at −78° C., a solution of N-phenyltrifluoromethanesulfonimide (9.8 g, 27.6 mmol, Aldrich) in THF (42 mL) was added and the mixture was stirred at 0° C. for 3.5 h. Then, a solution of THF/H2O (1:1) (100 mL) was added dropwise and the mixture was stirred at room temperature for 16 h. The solvent was removed in vacuo and the residue was purified by silica gel chromatography, eluting with hexane/EtOAc (7:1) to give the title compound as a yellow oil.
A mixture of 4-trifluoromethanesulfonyloxy-3,6-dihydro-2H-pyridine-1-carboxylic acid tert-butyl ester from step (a) above (2 g, 6 mmol), bis(pinacolato)diboron (1.7 g, 6.6 mmol, Lancaster), potassium acetate (1.76 g, 18 mmol, Aldrich), [1,1-bis(diphenylphosphino)ferrocene]dichloro-palladium(II), complex with dichloromethane (147 mg, 0.18 mmol, Aldrich) and 1,1-bis(diphenylphosphino)ferrocene (100 mg, 0.18 mmol, Strem chemicals) in 1,4-dioxane (36 mL) was heated at 80° C. for 16 h. The mixture was cooled to room temperature and was filtered. The filtrate was concentrated in vacuo and the residue was purified by silica gel chromatography, eluting with EtOAc/hexane (1:15) to give the title compound as a white solid. MS (ESI, positive ion) m/z: 310 (M+1).
A mixture of 2-chloro-3-trifluoromethyl-pyridine (400 mg, 1.3 mmol, TCI America), 4-(4,4,5,5-tetramethyl-[1,3,2]dioxaborolan-2-yl)-3,6-dihydro-2H-pyridine-1-carboxylic acid tert-butyl ester from step (b) above (234 mg, 1.3 mmol), dichloro-bis(triphenylphosphine) palladium (TI) (180 mg, 0.258 mmol, Strem Chemicals), Na2CO3 (544 mg, 5.18 mmol) in a 7:3:2 solution of dimethoxyethane/H2O/EtOH (8 mL) was subjected to microwave irradiation at 140° C. for 0.5 h. The mixture was cooled to room temperature, filtered and washed with dichloromethane (2×100 mL). The filtrate was concentrated in vacuo and the residue was purified by silica gel column chromatography, eluting with EtOAc/hexane (1:3) to give a solid intermediate. MS (ESI, positive ion) m/z: 329 (M+1). The solid was dissolved in 30% TFA in dichloromethane (10 mL) and the mixture was stirred at room temperature for 0.75 h. The solvent was removed in vacuo to give the title compound, which was used in the next step without additional purification. MS (ESI, positive ion) m/z: 229 (M+1).
3-Trifluoromethyl-1′,2′,3′,6′-tetrahydro-[2,4′]bipyridinyl, trifluoroacetic acid salt from step (c) above and 2-chloro-5-trifluoromethyl-7-(3,4,5-trifluoro-phenyl)-1H-benzoimidazole (400 mg, 1.14 mmol, Example 51b) reacted under the conditions of Example 100e to give the title compound as a yellow solid. MS (ESI, positive ion) m/z: 543 (M+1).
A mixture of 3-trifluoromethyl-1′-[6-trifluoromethyl-4-(3,4,5-trifluoro-phenyl)-1H-benzoimidazol-2-yl]-1′,2′,3′,6′-tetrahydro-[2,4′]bipyridinyl, trifluoroacetic acid salt (192 mg, 0.354 mmol, Example 109d) and palladium, 10 wt % on activated carbon (20 mg, Aldrich) in methanol (2 mL) was stirred at room temperature under hydrogen for 32 h. The mixture was filtered through Celite®, the filtrate was concentrated in vacuo and the residue was purified by silica gel column chromatography, eluting with EtOAc/hexane (1:1) to give the title compound as a white solid. MS (ESI, positive ion) m/z: 545 (M+1).
A mixture of fmoc-D-Nle-OH (10 g, 28.3 mmol, Novabiochem) and PS-carbodiimide (33 g, 42.45 mmol, 1.28 mmol/g, Argonaut Technologies Inc.) in dichloromethane (250 mL) was stirred at room temperature for 0.5 h. Then, glycine methyl ester hydrochloride (5.3 g, 42.45 mmol, Aldrich), HOAt (3.8 g, 28.3 mmol, Perseptive Biosystems) and diisopropylethylamine (16 mL, 84.9 mmol, Aldrich) were added and the mixture was stirred at room temperature for 16 h. The mixture was filtered and the resin was washed with dichloromethane (2×70 mL). The filtrate was concentrated in vacuo and the residue was purified by column chromatography, eluting with EtOAc/hexane (1:2) to give the title compound as a yellow solid. MS (ESI, positive ion) m/z: 425 (M+1).
A solution of methyl N-{[(9H-fluoren-9-ylmethyl)oxy]carbonyl}-D-norleucylglycinate from step (a) above (2 g, 4.7 mmol) in a 7:3 mixture of dichloromethane/piperidine (30 mL) was stirred at room temperature for 0.75 h. The reaction mixture was diluted with dichloromethane (200 mL) and solid which precipitated was filtered, washed with cold DCM (2×50 mL) and dried in vacuo to give the title compound as a white solid. MS (ESI, positive ion) m/z: 171 (M+1).
To a cooled to −78° C. solution of (3R)-3-butyl-2,5-piperazinedione from step (b) above (600 mg, 2.52 mmol) in THF (10 mL) was added dropwise lithium aluminum hydride (21 mL, 21.1 mmol, 1M in THF, Aldrich). The mixture was stirred at room temperature for 1 h, and then heated at reflux for 16 h. The mixture was cooled to 0° C. and quenched with sodium sulfate decahydrate until the gas evolution ceased. The mixture was stirred at room temperature for 3 h, filtered and the filter cake was washed with THF (2×10 mL). The filtrate was concentrated in vacuo to give the title compound as a yellow solid. MS (ESI, positive ion) m/z: 143 (M+1).
A mixture of (2R)-2-butylpiperazine from step (c) above (381 mg, 2.68 mmol), 2-chloro-3-trifluoromethyl-pyridine (486 mg, 2.68 mmol, TCI America) triethylamine (425 μL, 2.9 mmol, Aldrich) in 3-methyl-butan-1-ol (5 mL) was subjected to microwave irradiation at 180° C. for 1 h. The mixture was cooled to room temperature and filtered. The filtrate was purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as a yellow oil. MS (ESI, positive ion) m/z: 288 (M+1).
(3R)-3-Butyl-1-(3-(trifluoromethyl)-2-pyridinyl)piperazine, trifluoroacetic acid salt from step (d) above (220 mg, 0.76 mmol) and 2-chloro-5-trifluoromethyl-7-(3,4,5-trifluoro-phenyl)-1H-benzoimidazole (100 mg, 0.285 mmol, Example 51b) reacted under the conditions of Example 100e to give the title compound as a light-yellow oil. MS (ESI, positive ion) m/z: 602 (M+1).
To a solution of 1-(3-trifluoromethyl-pyridin-2-yl)-piperazine (8 g, 34.6 mmol, Oakwood) in dichloromethane (230 mL) was added dropwise bromine (3.92 mL, 76.12 mmol, Aldrich) with stirring at room temperature. The resulting mixture was stirred at room temperature for 16 h and the precipitate was filtered, washed with EtOAc (2×100 mL) and dried in vacuo to give the title compound as a yellow solid, which was used in the next step without additional purification. MS (ESI, positive ion) m/z: 310 (M+1).
A solution of bis(1,1-dimethylethyl) dicarbonate (8.2 g, 38.06 mmol, Aldrich) in dichloromethane (100 mL) was added dropwise to a mixture of 1-(5-bromo-3-trifluoromethyl-pyridin-2-yl)-piperazine from step (a) above and diisopropylethylamine (9.6 mL, 51.9 mmol, Aldrich) in dichloromethane (130 mL) with stirring at 0° C. The reaction mixture was stirred at 0° C. for 3 h, the solvent was removed in vacuo and the residue was purified by silica gel column chromatography (gradient EtOAc in dichloromethane) to give the title compound as a light-yellow solid. MS (ESI, positive ion) m/z: 410 (M+1).
A mixture of 4-(5-bromo-3-trifluoromethyl-pyridin-2-yl)-piperazine-1-carboxylic acid tert-butyl ester from step (b) above (174 mg, 0.42 mmol), N-(2-aminoethyl)-N,N-dimethylamine (56 μL, 0.51 mmol, Aldrich), tris (dibenzylideneacetone) dipalladium (0) chloroform adduct (22 mg, 0.021 mmol, Strem Chemicals), biphenyl-2-yl-di-tert-butyl-phosphane (13 mg, 0.042 mmol, Strem Chemicals), sodium t-butoxide (65 mg, 0.63 mmol, Aldrich) in toluene (2 mL) was subjected to microwave irradiation at 150° C. for 0.5 h. The mixture was cooled to room temperature and was filtered. The filtrate was purified by silica gel column chromatography, eluting with 5%-100% (2M NH3 in MeOH) in dichloromethane, to give the title product as a brown solid. MS (ESI, positive ion) m/z: 418 (M+1).
A solution of 4-[5-(2-dimethylamino-ethylamino)-3-trifluoromethyl-pyridin-2-yl]-piperazine-1-carboxylic acid tert-butyl ester from step (c) above in 30% TFA in dichloromethane (10 mL) was stirred at room temperature for 0.5 h. The solvent was removed in vacuo to give the title compound, which was used in the next step without additional purification. MS (ESI, positive ion) m/z: 318 (M+1).
N,N-Dimethyl-N′-(6-piperazin-1-yl-5-trifluoromethyl-pyridin-3-yl)-ethane-1,2-diamine trifluoro acetic acid from step (d) above and 2-chloro-5-trifluoromethyl-7-(3,4,5-trifluoro-phenyl)-1H-benzoimidazole (46 mg, 0.131 mmol, Example 51b) reacted under the condition of Example 100e to give the title compound as a light-yellow oil. MS (ESI, positive ion) m/z: 632 (M+1).
Benzyl chloroformate (806 μL, 5.7 mmol, Aldrich) was added dropwise to a mixture of 1-(5-bromo-3-trifluoromethyl-pyridin-2-yl)-piperazine (1.6 g, 5.2 mmol, Example 112a) and diisopropylethylamine (1.1 mL, 6.24 mmol, Aldrich) in dichloromethane (35 mL) with stirring at 0° C. The mixture was stirred at room temperature for 16 h. The solvent was removed in vacuo and the residue was purified by silica gel column chromatography (2%-100% EtOAc/hexane) to give the title compound as an orange oil. MS (ESI, positive ion) m/z: 444 (M+1).
A mixture of 4-(5-bromo-3-trifluoromethyl-pyridin-2-yl)-piperazine-1-carboxylic acid benzyl ester from step (a) above (300 mg, 0.677 mmol), acetamide (60 mg, 1 mmol, Aldrich), tris(dibenzylideneacetone) dipalladium (0) chloroform adduct (70 mg, 0.068 mmol, Strem Chemicals), 4,5-bis (diphenylphosphino)-9,9-dimethylxanthene (78 mg, 0.135 mmol, Aldrich) and cesium carbonate (331 mg, 1.01 mmol, Aldrich) in 1,4-dioxane (4 mL) was subjected to microwave irradiation at 170° C. for 0.5 h. The mixture was cooled to room temperature and was filtered. The filtrate was purified by silica gel column chromatography (2%-100% EtOAc/hexane) to give the title compound as a light-brown solid. MS (ESI, positive ion) m/z: 423 (M+1).
4-(5-Acetylamino-3-trifluoromethyl-pyridin-2-yl)-piperazine-1-carboxylic acid benzyl ester from step (b) above reacted under the conditions of Example 110 to give the title compound. MS (ESI, positive ion) m/z: 289 (M+1).
N-(6-piperazin-1-yl-5-trifluoromethyl-pyridin-3-yl)-acetamide from step (c) above and 2-chloro-5-trifluoromethyl-7-(3,4,5-trifluoro-phenyl)-1H-benzoimidazole (134 mg, 0.382 mmol, Example 51b) reacted under the conditions of Example 100e to give the title compound as a white solid. MS (ESI, positive ion) m/z: 603 (M+1).
3,4-Diamino-1-fluorobenzene (1.205 g, 9.6 mmol, Lancaster) and 1,1′-carbonyldiimidazole (1.549 g, 9.6 mmol, Aldrich) reacted under the conditions of Example 1b to give the title compound as an amorphous solid. MS (ESI, pos. ion) m/z: 153 (M+1).
The dihydrobenzimidazol-2-one from step (a) above (572 mg, 3.8 mmol) and POCl3 (6 mL) reacted under the conditions of Example 1c to give the title compound as an amorphous solid. MS (ESI, pos. ion) m/z: 171 (M+1).
A mixture of the chlorobenzimidazole from step (b) above (170 mg, 1.0 mmol), 1-(3-trifluoromethylpyridin-2-yl)piperazine (347 mg, 1.5 mmol) and sodium bicarbonate (250 mg, 2.9 mmol) in isoamyl alcohol (2 mL) was heated at 150° C. in a microwave synthesizer for 10 min. The reaction mixture was the cooled to room temperature, diluted with MeOH (3 mL), filtered and the filtrate was purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as an amorphous solid. MS (ESI, pos. ion) m/z: 366 (M+1).
3,4-Diaminobenzonitrile (3.171 g, 23.8 mmol, Oakwood) was reacted with 1,1′-carbonyldiimidazole (3.862 g, 23.8 mmol, Aldrich) under the conditions of Example 1b to give the title compound as an amorphous solid. MS (ESI, pos. ion) m/z: 160 (M+1).
A solution of the dihydrobenzimidazol-2-one from step (a) above (854 mg, 5.4 mmol) was reacted under the conditions of Example 1c to give the title compound as an amorphous solid. MS (ESI, pos. ion) m/z: 178 (M+1).
A mixture of the chlorobenzimidazole from step (b) above (310 mg, 1.7 mmol), 1-(3-trifluoromethylpyridin-2-yl)piperazine (405 mg, 1.8 mmol) and sodium bicarbonate (370 mg, 4.4 mmol) in isoamyl alcohol (2.5 mL) was reacted under the conditions of Example 114c to give the title compound as an amorphous solid. MS (ESI, pos. ion) m/z: 373 (M+1).
Methyl-3,4-diaminobenzoate (1.251 g, 7.5 mmol, Lancaster) was reacted with 1,1′-carbonyldiimidazole (2.128 g, 13.1 mmol, Aldrich) under the conditions of Example 1b to give the title compound as an amorphous solid. MS (ESI, pos. ion) m/z: 193 (M+1).
A solution of the dihydrobenzimidazol-2-one from step (a) above (263 mg, 1.4 mmol) was reacted under the conditions of Example 1c to give the title compound as an amorphous solid. MS (ESI, pos. ion) m/z: 211 (M+1).
A mixture of the chlorobenzimidazole from step (b) above (218 mg, 1.04 mmol), 1-(3-trifluoromethylpyridin-2-yl)piperazine (360 mg, 1.6 mmol, Fluorochem) and sodium bicarbonate (135 mg, 1.6 mmol) in isoamyl alcohol (2.2 mL) was reacted under the conditions of Example 114c to give the title compound as an amorphous solid. MS (ESI, pos. ion) m/z: 406 (M+1).
A mixture of the 3-amino-2-chloro-6-(trifluoromethyl)pyridine (416 mg, 2.1 mmol, Matrix), 4-methoxy-benzylamine (294 mg, 2.1 mmol, Aldrich) and sodium bicarbonate (265 mg, 3.2 mmol) in isoamyl alcohol (0.6 mL) was heated at 220° C. in a microwave synthesizer for 30 min. The reaction mixture was then cooled to room temperature, diluted with MeOH (5 mL), filtered and the filtrate was evaporated in vacuo. The residue was purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as a yellow oil. MS (ESI, pos. ion) m/z: 298 (M+1)
A solution of N2-(4-methoxy-benzyl)-6-trifluoromethyl-pyridine-2,3-diamine from step (a) above (220 mg, 0.7 mmol) in 1:1 TFA/DCM (4 mL) was stirred at room temperature for 90 min. The reaction mixture was concentrated to yield a gummy residue, which was dissolved in MeOH (2 mL) and purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as an amorphous solid. MS (ESI, pos. ion) m/z: 178 (M+1)
A mixture of the pyridine-2,3-diamine (160 mg, 0.9 mmol) from step (b) above and N,N′-disuccinimidyl carbonate (250 mg, 0.9 mmol, Aldrich) in MeCN (5 mL) was stirred at room temperature for 13 h. Another batch of N,N′-disuccinimidyl carbonate (125 mg, 0.5 mmol, Aldrich) was added and the reaction mixture was heated at 75° C. for 90 min. The reaction mixture was cooled to room temperature and dichloromethane (20 mL) was added. The precipitate was filtered and dried under vacuo to give the title compound, which was used in the next step without additional purification. MS (ESI, pos. ion) m/z: 204 (M+1).
The product from above step (c) above reacted with POCl3 (1.5 mL) under the conditions of Example 1c to give the title compound as an amorphous solid. MS (ESI, pos. ion) m/z: 222 (M+1).
A mixture of the chlorobenzimidazole from step (d) above (165 mg, 0.7 mmol), 1-(3-trifluoromethylpyridin-2-yl)piperazine (260 mg, 1.1 mmol, Fluorochem) and sodium bicarbonate (160 mg, 1.9 mmol) in isoamyl alcohol (2.3 mL) reacted under the conditions of Example 114c to give the title compound as an amorphous solid. MS (ESI, pos. ion) m/z: 417 (M+1).
A mixture of 6-bromo-5-trifluoromethyl-2-[4-(3-trifluoromethyl-pyridin-2-yl)-piperazin-1-yl]-1H-benzoimidazole (120 mg, 0.24 mmol, Example 89 g), 4-(trifluoromethyl)phenylboronic acid (60 mg, 0.32 mmol, Aldrich), tetrakis(triphenylphosphine)palladium(0) (28 mg, 0.02 mmol, Aldrich), sodium carbonate (0.25 mL, 2 M solution in water) in dioxane (1.75 mL) was heated to 170° C. in a microwave synthesizer for 20 min. The reaction mixture was cooled to room temperature, diluted with EtOAc (10 mL), filtered through a Varian Chem-Elut® (3 mL) diatomaceous earth cartridge and the filtrate was evaporated in vacuo. The residue was purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as an amorphous solid. MS (ESI, pos. ion) m/z: 560 (M+1)
A mixture of 6-bromo-5-trifluoromethyl-2-[4-(3-trifluoromethyl-pyridin-2-yl)-piperazin-1-yl]-1H-benzoimidazole (150 mg, 0.3 mmol, Example 89 g), 3,4,5-trifluorophenylboronic acid (65 mg, 0.37 mmol, Aldrich) reacted under the conditions of Example 118 to give the title compound as an amorphous solid. MS (ESI, pos. ion) m/z: 546 (M+1).
A mixture of the 6-bromo-2-chloro-5-trifluoromethyl-1H-benzoimidazole (396 mg, 1.32 mmol, Example 89f), (5-chloro-6-piperazin-1-yl-pyridin-3-yl)-methanol (288 mg, 1.3 mmol, Example 60a) and sodium bicarbonate (249 mg, 2.96 mmol) in isoamyl alcohol (2.25 mL) was heated at 190° C. in a microwave synthesizer for 33 min. The reaction mixture was cooled to room temperature, diluted with MeOH (4 mL) and filtered. The filtrate was purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as an amorphous solid. MS (ESI, pos. ion) m/z: 490 (M+1).
A mixture of 6-bromo-5-trifluoromethyl-2-[4-(3-trifluoromethyl-pyridin-2-yl)-piperazin-1-yl]-1H-benzoimidazole (123 mg, 0.25 mmol, Example 89 g) and cuprous cyanide (205 mg, 2.29 mmol), Aldrich) in N-methylpyrrolidinone (2 mL) was heated at 220° C. in a microwave synthesizer for 10 min. The reaction mixture was allowed to cool to room temperature, diluted with MeOH (5 mL) and filtered. The filtrate was purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as an amorphous solid. MS (ESI, pos. ion) m/z: 441 (M+1)
6-Bromo-5-trifluoromethyl-2-[4-(3-trifluoromethyl-pyridin-2-yl)-piperazin-1-yl]-1H-benzoimidazole (136 mg, 0.28 mmol, Example 89 g) and 4-(4,4,5,5-tetramethyl-[1,3,2]dioxaborolan-2-yl)-3,6-dihydro-2H-pyridine-1-carboxylic acid tert-butyl ester (99 mg, 0.32 mmol, Chemshop) reacted under the conditions of Example 118 to give the title compound as an amorphous solid. MS (ESI, pos. ion) m/z: 597 (M+1).
6-Bromo-5-trifluoromethyl-2-[4-(3-trifluoromethyl-pyridin-2-yl)-piperazin-1-yl]-1H-benzoimidazole (91 mg, 0.18 mmol, Example 89 g) and 4,4,5,5-tetramethyl-2-(4-trifluoromethyl-cyclohex-1-enyl)-[1,3,2]dioxaborolane (73 mg, 0.26 mmol, Chemshop) reacted under the conditions of Example 118 to give the title compound as an amorphous solid. MS (ESI, pos. ion) m/z: 564 (M+1)
A mixture of the 2-piperazin-1-yl-5-trifluoromethyl-7-(3,4,5-trifluoro-phenyl)-1H-benzoimidazole (79 mg, 0.20 mmol, Example 104a), 1-chloroisoquinoline (67 mg, 0.41 mmol, Lancaster) and sodium bicarbonate (25 mg, 0.30 mmol) in isoamyl alcohol (1.0 mL) was heated at 185° C. in a microwave synthesizer for 26 min. The reaction mixture was cooled to room temperature, diluted with MeOH (2 mL), filtered and the filtrate was purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as an amorphous solid. MS (ESI, pos. ion) m/z: 528 (M+1).
A mixture of 6-bromo-2-chloro-5-trifluoromethyl-1H-benzoimidazole (99 mg, 0.33 mmol, Example 89f), {5-chloro-6-[(3R)-3-methylpiperazin-1-yl)pyridin-3-yl}methanol (76 mg, 0.31 mmol, Example 62a) and N,N-diisopropylethylamine (67 mg, 0.52 mmol) in EtOH (0.8 mL) was heated at 180° C. in a microwave synthesizer for 30 min. The reaction mixture was cooled to room temperature, diluted with MeOH (2 mL) and purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as an amorphous solid. MS (ESI, pos. ion) m/z: 504 (M+1)
A mixture of the 6-bromoquinoline (328 mg, 1.6 mmol, TCI America), 1-BOC-piperazine (340 mg, 1.8 mmol, Aldrich), tris(dibenzylideneacetone)dipalladium(0) (75 mg, 0.1 mmol, Strem), rac-2,2′-bis(diphenylphosphino)-1,1′-binaphthyl (91 mg, 0.15 mmol, Strem) and sodium-tert-butoxide (252 mg, 2.7 mmol, Aldrich) in toluene (4 mL) was heated at 150° C. in a microwave synthesizer for 13 min. The reaction mixture was cooled to room temperature, diluted with EtOAc (5 mL) and filtered through a Celite® pad. The filtrate was concentrated in vacuo and the residue was dissolved in MeOH (4 mL) and purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as pale-yellow oil. MS (ESI, pos. ion) m/z: 314 (M+1).
The product from the above step (a) above was treated with 1:1 TFA/DCM (15 mL) and stirred at room temperature for 12 h. The reaction mixture was concentrated to yield a gummy residue, which was dissolved in MeOH (4 mL) and purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as an amorphous solid. MS (ESI, pos. ion) m/z: 214 (M+1).
A mixture of the 6-piperazin-1-yl-quinoline, trifluoroacetic acid salt from step (b) above (125 mg, 0.59 mmol), 7-bromo-2-chloro-5-trifluoromethyl-1H-benzoimidazole (225 mg, 0.75 mmol, Example 6b) and sodium bicarbonate (225 mg, 2.68 mmol) in isoamyl alcohol (2.5 mL) was heated at 180° C. in a microwave synthesizer for 30 min. The reaction mixture was cooled to room temperature, diluted with MeOH (2 mL) and filtered. The filtrate was purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as an amorphous solid. MS (ESI, pos. ion) m/z: 476 (M+1).
To a solution of 6-bromo-5-trifluoromethyl-2-[4-(3-trifluoromethyl-pyridin-2-yl)-piperazin-1-yl]-1H-benzoimidazole (203 mg, 0.41 mmol, Example 89 g) in dichloromethane (6 mL) was added N,N-diisopropylethylamine (148 mg, 1.15 mmol) followed by 2-(trimethylsilyl)ethoxymethyl chloride (94 mg, 0.57 mmol, Aldrich). The reaction mixture was stirred at room temperature for 16 h. The solvent was removed in vacuo and the residue was purified by silica gel column chromatography, eluting with EtOAc/hexane (1:3) to afford the title compound as an amorphous solid. MS (ESI, pos. ion) m/z: 624 (M+1).
A mixture of the product from step (a) above (88 mg, 0.14 mmol), 2-(3-trifluoromethylphenyl)ethylamine (45 mg, 0.24 mmol, Trans World Chemicals), tris(dibenzylideneacetone)dipalladium(0) (8 mg, 0.01 mmol, Strem), 2-(di-t-butylphosphino)biphenyl (8 mg, 0.03 mmol, Strem) and sodium-tert-butoxide (31 mg, 0.33 mmol, Aldrich) in toluene (2 mL) was heated at 150° C. in a microwave synthesizer for 14 min. The reaction mixture was cooled to room temperature, diluted with EtOAc (5 mL) and filtered through a Celite® pad. The filtrate was concentrated in vacuo and the residue dissolved in MeOH (4 mL), and purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as pale-yellow oil. MS (ESI, pos. ion) m/z: 733 (M+1).
The product from the above step (b) above was treated with 1:1 TFA/dichloromethane (3 mL) and stirred at room temperature for 12 h. The reaction mixture was concentrated to yield a gummy residue, which was dissolved in MeOH (4 mL) and purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as a yellow amorphous solid. MS (ESI, pos. ion) m/z: 603 (M+1).
5-Bromo-6-trifluoromethyl-2-[4-(3-trifluoromethyl-pyridin-2-yl)-piperazin-1-yl]-1-(2-trimethylsilanyl-ethoxymethyl)-1H-benzoimidazole (88 mg, 0.14 mmol, Example 127a) and 4-(trifluoromethyl)benzylamine (37 mg, 0.21 mmol, Aldrich) reacted under the conditions of Example 127b to give the title compound as pale-yellow oil. MS (ESI, pos. ion) m/z: 719 (M+1).
The product from step (a) above was treated with TFA/DCM (1:1) (3 mL) and stirred at room temperature for 12 h. The reaction mixture was concentrated to yield a gummy residue, which was dissolved in MeOH (4 mL) purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as a yellow amorphous solid. MS (ESI, pos. ion) m/z: 589 (M+1).
A solution of 4-hydroxyquinoline (300 mg, 2.07 mmol, Aldrich) in DMF (3 mL) was treated with sodium hydride (69 mg, 2.88 mmol, Aldrich) and the resulting slurry was stirred at 45° C. for 30 min. The reaction mixture was cooled to room temperature, N-phenyltrifluoromethanesulfonimide (885 mg, 2.48 mmol, Aldrich) was added and the mixture was stirred for 48 h. 1-BOC-piperazine (775 mg, 4.16 mmol, Aldrich) was added to the mixture and the stirring was continued for another 24 h. The solvent was removed in vacuo and the residue was dissolved in MeOH (4 mL) and purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as pale-yellow oil, which was used for the next step. MS (ESI, pos. ion) m/z: 314 (M+1).
The product from the above step (a) was treated with 1:1 TFA/DCM (10 mL) and stirred at room temperature for 12 h. The reaction mixture was concentrated to yield a gummy residue, which was dissolved in MeOH (4 mL) and purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as an amorphous solid. MS (ESI, pos. ion) m/z: 214 (M+1).
A mixture of the 4-piperazin-1-yl-quinoline from step (b) above (110 mg, 0.52 mmol), 7-bromo-2-chloro-5-trifluoromethyl-1H-benzoimidazole (178 mg, 0.59 mmol, Example 89f) and sodium bicarbonate (172 mg, 2.05 mmol) in isoamyl alcohol (2 mL) was heated at 180° C. in a microwave synthesizer for 30 min. The reaction mixture was cooled to room temperature, diluted with MeOH (3.5 mL), filtered and the filtrate was purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as yellow oil. MS (ESI, pos. ion) m/z: 476 (M+1).
5-Bromo-6-trifluoromethyl-2-[4-(3-trifluoromethyl-pyridin-2-yl)-piperazin-1-yl]-1-(2-trimethylsilanyl-ethoxymethyl)-1H-benzoimidazole (99 mg, 0.16 mmol, Example 127a) reacted with 1-(2-aminoethyl)piperidine (36 mg, 0.28 mmol, Aldrich) under the conditions of Example 127b to give the title compound as pale-yellow oil, which was used for the next step. MS (ESI, pos. ion) m/z: 672 (M+1).
The product from step (a) above was treated with 1:1 TFA/dichloromethane (3 mL) and stirred at room temperature for 12 h. The reaction mixture was concentrated to yield a gummy residue, which was dissolved in MeOH (4 mL) and purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as yellow oil. MS (ESI, pos. ion) m/z: 542 (M+1).
5-Bromo-6-trifluoromethyl-2-[4-(3-trifluoromethyl-pyridin-2-yl)-piperazin-1-yl]-1-(2-trimethylsilanyl-ethoxymethyl)-1H-benzoimidazole (99 mg, 0.15 mmol, Example 127a) and 4-(2-aminoethyl) morpholine (60 mg, 0.46 mmol, Aldrich) reacted under the conditions of Example 127b to give the title compound as pale-yellow oil, which was used for the next step. MS (ESI, pos. ion) m/z: 674 (M+1).
The product from step (a) above was treated with TFA/DCM (1:1) (3 mL) and stirred at room temperature for 12 h. The reaction mixture was concentrated to yield a gummy residue, which was dissolved in MeOH (4 mL) and purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as yellow oil. MS (ESI, pos. ion) m/z: 544 (M+1).
A solution of 7-hydroxyquinoline (324 mg, 2.23 mmol, Acros) in DMF (5 mL) was treated with sodium hydride (75 mg, 3.13 mmol, Aldrich) and the resulting slurry was stirred at 45° C. for 30 min. The reaction mixture was cooled to room temperature, N-phenyltrifluoromethanesulfonimide (955 mg, 2.67 mmol, Aldrich) was added, and the stirring was continued for 20 h. The reaction mixture quenched with MeOH (5 mL) and the solvent was removed in vacuo. The resulting gummy residue was dissolved in MeOH (3 mL) and purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as yellow amorphous solid. MS (ESI, pos. ion) m/z: 278 (M+1).
A mixture of the product from step (a) above (155 mg, 0.56 mmol), 1-BOC-piperazine (176 mg, 0.95 mmol, Aldrich), tris(dibenzylideneacetone)dipalladium(0) (34 mg, 0.04 mmol, Strem), 2-(di-t-butylphosphino)biphenyl (31 mg, 0.1 mmol, Strem) and sodium-tert-butoxide (77 mg, 0.8 mmol, Aldrich) in toluene (2 mL) was heated at 150° C. in a microwave synthesizer for 14 min. The reaction mixture was then cooled to room temperature, diluted with dichloromethane (5 mL) and filtered through a Celite®pad. The filtrate was concentrated in vacuo and the residue was dissolved in MeOH (4 mL), and purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as yellow amorphous solid, which was used for the next step. MS (ESI, pos. ion) m/z: 314 (M+1).
The product from step (b) above was treated with 1:1 TFA/dichloromethane (5 mL) and stirred at room temperature for 12 h. The reaction mixture was concentrated to yield a gummy residue, which was dissolved in MeOH (4 mL) and purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as an amorphous solid. MS (ESI, pos. ion) m/z: 214 (M+1).
A mixture of the 7-piperazin-1-yl-quinoline from step (c) above (75 mg, 0.35 mmol), 7-bromo-2-chloro-5-trifluoromethyl-1H-benzoimidazole (130 mg, 0.43 mmol, Example 6b) and sodium bicarbonate (141 mg, 1.7 mmol) in isoamyl alcohol (2 mL) was heated at 180° C. in a microwave synthesizer for 30 min. The reaction mixture was cooled to room temperature, diluted with MeOH (3.5 mL), filtered and the filtrate was purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as yellow oil. MS (ESI, pos. ion) m/z: 476 (M+1).
7-Hydroxyisoquinoline (331 mg, 2.28 mmol, Lancaster) was treated with sodium hydride (75 mg, 3.13 mmol, Aldrich) and N-phenyltrifluoromethanesulfonimide (960 mg, 2.69 mmol, Aldrich) under the conditions of Example 132a to give the title compound as an amorphous solid. MS (ESI, pos. ion) m/z: 278 (M+1).
The product from step (a) above (300 mg, 1.1 mmol) and 1-BOC-piperazine (307 mg, 1.6 mmol, Aldrich) was reacted under the conditions of Example 132b to give the title compound as yellow amorphous solid, which was used for the next step. MS (ESI, pos. ion) m/z: 314 (M+1).
The product from step (b) above was treated with 1:1 TFA/dichloromethane (5 mL) and stirred at room temperature for 12 h. The reaction mixture was concentrated to yield a gummy residue, which was dissolved in MeOH (4 mL) and purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as an amorphous solid. MS (ESI, pos. ion) m/z: 214 (M+1).
A mixture of the 7-piperazin-1-yl-isoquinoline from step (c) above (45 mg, 0.21 mmol) and 7-bromo-2-chloro-5-trifluoromethyl-1H-benzoimidazole (87 mg, 0.29 mmol, Example 6b) was reacted under the conditions of Example 132d to give the title compound as yellow oil. MS (ESI, pos. ion) m/z: 476 (M+1).
5-Bromo-6-trifluoromethyl-2-[4-(3-trifluoromethyl-pyridin-2-yl)-piperazin-1-yl]-1-(2-trimethylsilanyl-ethoxymethyl)-1H-benzoimidazole (105 mg, 0.17 mmol, Example 127a) and 4-N-(2-aminoethyl)-1-N—BOC-piperazine (70 mg, 0.31 mmol, Aldrich) reacted under the conditions of Example 127b to give the title compound as pale-yellow oil, which was used for the next step. MS (ESI, pos. ion) m/z: 773 (M+1).
The product from step (a) above was treated with TFA/DCM (1:1) (3 mL) and stirred at room temperature for 12 h. The reaction mixture was concentrated to yield a gummy residue, which was dissolved in MeOH (4 mL) and purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as an amorphous solid. MS (ESI, pos. ion) m/z: 543 (M+1).
5-Hydroxyisoquinoline (278 mg, 1.92 mmol, Aldrich) was treated with sodium hydride (60 mg, 2.5 mmol, Aldrich) and N-phenyltrifluoromethanesulfonimide (765 mg, 2.14 mmol, Aldrich) under the conditions of Example 132a to give the title compound as an amorphous solid. MS (ESI, pos. ion) m/z: 278 (M+1).
The product from step (a) above (209 mg, 0.75 mmol) and 1-BOC-piperazine (210 mg, 1.1 mmol, Aldrich) was reacted under the conditions of Example 132b to give the title compound as yellow amorphous solid, which was used for the next step. MS (ESI, pos. ion) m/z: 314 (M+1)
The product from step (b) above was treated with 1:1 TFA/dichloromethane (5 mL) and stirred at room temperature for 12 h. The reaction mixture was concentrated to yield a gummy residue, which was dissolved in MeOH (2 mL) and purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as an amorphous solid. MS (ESI, pos. ion) m/z: 214 (M+1).
A mixture of the 5-piperazin-1-yl-isoquinoline from step (c) above (23 mg, 0.1 mmol) and 7-bromo-2-chloro-5-trifluoromethyl-1H-benzoimidazole (36 mg, 0.12 mmol, Example 6b) was reacted under the conditions of Example 132d to give the title compound as yellow amorphous solid. MS (ESI, pos. ion) m/z: 476 (M+1).
A mixture of 4-bromo-6-trifluoromethyl-2-[4-(3-trifluoromethyl-pyridin-2-yl)-piperazin-1-yl]-1H-benzoimidazole (100 mg, 0.2 mmol, Example 7) and cuprous cyanide (48 mg, 0.5 mmol), Aldrich) in N-methylpyrrolidinone (2 mL) was heated at 200° C. in a microwave synthesizer for 10 min. The reaction mixture was allowed to cool to room temperature, diluted with MeOH (5 mL) and filtered. The solvent was removed in vacuo, and the residue purified by silica gel column chromatography with 20% ethyl acetate/hexane as eluant to give the title compound as a brown oil. MS (ESI, pos. ion) m/z: 441.3 (M+1).
4-Bromo-6-trifluoromethyl-2-[4-(3-trifluoromethyl-pyridin-2-yl)-piperazin-1-yl]-1H-benzoimidazole (50 mg, 0.1 mmol) and 4-(4,4,5,5-tetramethyl-[1,3,2]dioxaborolan-2-yl)-3,6-dihydro-2H-pyridine-1-carboxylic acid tert-butyl ester (100 mg, 0.32 mmol, ChemShop) reacted under the conditions of Example 10 to provide the title compound. MS (ESI, pos. ion) m/z: 597 (M+1). M.p. 228.3-238.9° C. (decomp.).
To 4-tert-butylcyclohexanone (6.24 mmol, 40 mmol, Aldrich) in THF (100 mL) was added lithiumbistrimethylsilyl amide (40 mL, 1M solution in THF, Aldrich) over a period of 30 min with stirring at −78° C. After stirring for 1 hr at −78° C., a solution of N-phenyltrifluoromethanesulfonimide (14.28 g, 40 mmol, Aldrich) in THF (100 mL) was added over a period of 30 min. The reaction mixture was stirred at −78° C. for 2 h and slowly warmed to room temperature over a period of 6 h. The reaction mixture was extracted with EtOAc, the combined organic extracts were washed with water, dried over Na2SO4 and filtered. The filtrate was evaporated and the residue was purified by silica gel column chromatography (10% ethyl acetate/hexane) to give the title compound as an oil.
To a solution of the triflate from step (a) above in dioxane (100 mL) was added bisboronpinacolate (5.6 g, 22 mmol, Aldrich), potassium acetate (6 g, 61 mmol), PdCl2(dppf) (315 mg, 0.6 mmol, Strem), dppf (332 mg, 0.6 mmol, Strem) and the contents were flushed with nitrogen. The reaction mixture was heated at 80° C. overnight. The solvents were removed in vacuo and the residue was extracted with EtOAc, and washed with water. The organic layer was separated, dried over Na2SO4 and filtered. The filtrate was evaporated and the residue was purified by silica gel column chromatography (10% ethyl acetate/hexane) to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 265.2 (M+1).
4-Bromo-6-trifluoromethyl-2-[4-(3-trifluoromethyl-pyridin-2-yl)-piperazin-1-yl]-1H-benzoimidazole (250 mg, 0.5 mmol, Example 7) and 2-(4-tert-butyl-cyclohex-1-enyl)-4,4,5,5-tetramethyl-[1,3,2]dioxaborolane from step (b) above (200 mg, 0.76 mmol) reacted under the conditions of Example 10 to give the title compound as a white solid. MS (ESI, pos. ion) m/z: 552 (M+1). M.p. 96-97.7° C.
4-Trifluoromethylcyclohexanone (Matrix) reacted under the conditions of Example 138a to give the title compound. MS (ESI, pos. ion) m/z: 277.2 (M+1).
4-Bromo-6-trifluoromethyl-2-[4-(3-trifluoromethyl-pyridin-2-yl)-piperazin-1-yl]-1H-benzoimidazole (100 mg, 0.5 mmol, Example 7) reacted with 4,4,5,5-tetramethyl-2-(4-trifluoromethyl-cyclohex-1-enyl)-[1,3,2]dioxaborolane from step (a) above (200 mg, 0.72 mmol) under the conditions of Example 10 to give the title compound as a white solid. MS (ESI, pos. ion) m/z: 564.4 (M+1). M.p. 213.4-217.3° C.
To 4-{6-trifluoromethyl-2-[4-(3-trifluoromethyl-pyridin-2-yl)-piperazin-1-yl]-1H-benzoimidazol-4-yl}-3,6-dihydro-2H-pyridine-1-carboxylic acid tert-butyl ester, trifluoroacetic acid salt (15 mg, Example 137) was added 1:1 mixture of TFA/dichloromethane (1 mL). The reaction mixture was allowed to stand at 25° C. for 4 h. The solvent was removed in vacuo and the residue was purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as an oil. MS (ESI, pos. ion) m/z: 564.4 (M+1).
A mixture of 4-(1,2,3,6-tetrahydro-pyridin-4-yl)-6-trifluoromethyl-2-[4-(3-trifluoromethyl-pyridin-2-yl)-piperazin-1-yl]-1H-benzoimidazole, trifluoroacetic acid salt (400 mg, 0.8 mmol, Example 140), acetone (0.5 mL, 6.7 mmol) and 2 drops of glacial acetic acid in DMF (2 mL) was heated at 100° C. in a microwave synthesizer for 5 min. The reaction mixture was cooled to room temperature, triacetoxyborohydride (460 mg, 2.17 mmol, Aldrich) was added and the mixture was heated at 100° C. in a microwave synthesizer for 10 min. The reaction mixture was cooled to room temperature, diluted with EtOAc (100 mL) and washed with water. The organic layer was separated, dried over Na2SO4 and filtered. The filtrate was evaporated and the residue was purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound. MS (ESI, pos. ion) m/z: 539 (M+1).
6-Trifluoromethyl-4-(4-trifluoromethyl-cyclohex-1-enyl)-2-[4-(3-trifluoromethyl-pyridin-2-yl)-piperazin-1-yl]-1H-benzoimidazole (10 mg, Example 139b) was subjected to catalytic hydrogenation in ethanol (1 mL) using 10% Pd/C (10 mg, Aldrich) as catalyst. The reaction was conducted at room temperature under 1 atmosphere hydrogen for 2 days. The catalyst was filtered through a Celite®pad, the filter cake was washed with methanol and the filtrate was evaporated in vacuo to give the title compound as a film. MS (ESI, pos. ion) m/z: 565 (M+1).
To a suspension of 1-(3-trifluoromethyl-pyridin-2-yl)-piperazine (230 mg, 1 mmol, Oakwood Products) in dichloromethane (5 mL) was added a solution of bromine in dichloromethane (1.5 mL, 1 M, 1.5 mmol). The reaction mixture was stirred at 25° C. for 2 h. The precipitated yellow solid was filtered, washed with small amount of methanol and dried in vacuo to give the title compound as a yellow amorphous solid. MS (ESI, pos. ion) m/z: 311 (M+1).
To a solution of 1-(5-bromo-3-trifluoromethyl-pyridin-2-yl)-piperazine from step (a) above (155 mg, 0.5 mmol) in isoamyl alcohol (2 mL) was added 7-bromo-2-chloro-5-trifluoromethyl-1H-benzoimidazole (100 mg, 0.43 mmol, ChemShop). The reaction mixture was heated at 180° C. in a microwave synthesizer for 5 min. The reaction mixture was cooled to room temperature and filtered. The filtrate was evaporated in vacuo and the residue was purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as an oil. MS (ESI, pos. ion) m/z: 494 (M+1)
1-(5-Bromo-3-trifluoromethyl-pyridin-2-yl)-piperazine (78 mg, 0.25 mmol, Example 143a) and 4-bromo-2-chloro-6-trifluoromethyl-1H-benzoimidazole (75 mg, 0.25 mmol, Example 6b) reacted under the conditions of Example 143b to give the title compound as a white solid. MS (ESI, pos. ion) m/z: 574 (M+1). M.p. 174.2-175.1° C.
A suspension of 2,6-dichloro-3-trifluoromethylpyridine (1.08 gm, 5 mmol, Lancaster), 4-methoxybenzyl amine (700 mg, 5 mmol, Aldrich) and sodium bicarbonate (430 mg, 5 mmol) in isoamyl alcohol (5 mL) was heated at 150° C. in a microwave synthesizer for 15 min. The reaction mixture was allowed to cool to room temperature, diluted with MeOH (10 mL) and filtered. The filtrate was evaporated in vacuo and the residue was purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to provide the title compound as a colorless oil. MS (ESI, pos. ion) m/z: 317 (M+1).
To the 4-methoxybenzylamine from step (a) above (200 mg, 0.63 mmol) was added acetic anhydride (2 mL). The reaction mixture was heated at 200° C. in a microwave synthesizer for 30 min. The reaction mixture was cooled to room temperature and evaporated in vacuo. The residue was purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to provide the title compound as a colorless solid. MS (ESI, pos. ion) m/z: 359 (M+1).
To a solution of N-(6-chloro-5-trifluoromethyl-pyridin-2-yl)-N-(4-methoxy-benzyl)-acetamide from step (b) above (145 mg, 0.40 mmol) in N-methylpyrrolidinone (2 mL) was added piperazine (130 mg, 1.5 mmol). The reaction mixture was heated at 220° C. in a microwave synthesizer for 30 min. The reaction mixture was cooled to room temperature, filtered, and the filtrate evaporated in vacuo. The residue was purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to provide the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 409 (M+1).
A mixture of N-(4-methoxy-benzyl)-N-(6-piperazin-1-yl-5-trifluoromethyl-pyridin-2-yl)-acetamide from step (c) above (50 mg, 0.12 mmol) and 4-bromo-2-chloro-6-trifluoromethyl-1H-benzoimidazole (60 mg, 0.19 mmol, Example 6b) in isoamyl alcohol (0.5 mL) was heated at 180° C. in a microwave synthesizer for 20 min. The reaction mixture was cooled to room temperature and filtered. The filtrate was evaporated in vacuo and the residue was purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as a colorless solid. MS (ESI, pos. ion) m/z: 671 (M+1).
N-{6-[4-(4-Bromo-6-trifluoromethyl-1H-benzoimidazol-2-yl)-piperazin-1-yl]-5-trifluoromethyl-pyridin-2-yl}-N-(4-methoxy-benzyl)-acetamide from step (d) above (20 mg, 0.03 mmol) was treated with trifluoroacetic acid (0.5 mL) at room temperature overnight. The reaction mixture was evaporated in vacuo and the residue was purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as a colorless film. MS (ESI, pos. ion) m/z: 551 (M+1).
4-Bromo-6-trifluoromethyl-2-[4-(3-trifluoromethyl-pyridin-2-yl)-piperazin-1-yl]-1H-benzoimidazole (2 g, 4 mmol, Example 7) in CH2Cl2 (20 mL) reacted with 2-(trimethylsilyl)ethoxymethyl chloride (660 mg, 4 mmol, Aldrich) under the conditions of Example 127a to give the title compound as a light-brown oil. MS (ESI, pos. ion) m/z: 564.4 (M+1).
4-Bromo-6-trifluoromethyl-2-[4-(3-trifluoromethyl-pyridin-2-yl)-piperazin-1-yl]-1-(2-trimethylsilanyl-ethoxymethyl)-1H-benzoimidazole from step (a) above (160 mg, 0.26 mmol) and piperidine (84 mg, 1 mmol) reacted under the conditions of Example 127b to give the title compound as an oil. MS (ESI, pos. ion) m/z: 629 (M+1).
To a solution of 4-piperidin-1-yl-6-trifluoromethyl-2-[4-(3-trifluoromethyl-pyridin-2-yl)-piperazin-1-yl]-1-(2-trimethylsilanyl-ethoxymethyl)-1H-benzoimidazole from step (b) above (30 mg, 0.047 mmol)) in CH2Cl2 (1 mL) was added trifluoroacetic acid (0.5 mL). The reaction mixture was allowed to stand at room temperature for 8 h. The solvent was removed in vacuo and the residue was purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to provide the title compound as a colorless film. MS (ESI, pos. ion) m/z: 499 (M+1).
4-Bromo-6-trifluoromethyl-2-[4-(3-trifluoromethyl-pyridin-2-yl)-piperazin-1-yl]-1-(2-trimethylsilanyl-ethoxymethyl)-1H-benzoimidazole from Example 146a reacted with morpholine under the conditions of Example 127b to give the title compound.
4-Morpholin-1-yl-6-trifluoromethyl-2-[4-(3-trifluoromethyl-pyridin-2-yl)-piperazin-1-yl]-1-(2-trimethylsilanyl-ethoxymethyl)-1H-benzoimidazole from step (a) above reacted with trifluoroacetic acid under the conditions of Example 146c to give the title compound. MS (ESI, pos. ion) m/z: 501 (M+1).
4-Bromo-6-trifluoromethyl-2-[4-(3-trifluoromethyl-pyridin-2-yl)-piperazin-1-yl]-1-(2-trimethylsilanyl-ethoxymethyl)-1H-benzoimidazole from Example 146a reacted with piperazine-1-carboxylic acid tert-butyl ester under the conditions of Example 127b to give the title compound.
4-{6-Trifluoromethyl-2-[4-(3-trifluoromethyl-pyridin-2-yl)-piperazin-1-yl]-1H-benzoimidazol-4-yl}-piperazine-1-carboxylic acid tert-butyl ester from step (a) above reacted with trifluoroacetic acid under the conditions of Example 146c to give the title compound. MS (ESI, pos. ion) m/z: 500 (M+1).
2,3,5-Trichloro-pyridine (910 mg, 5.0 mmol, Aldrich) and (R)-(−)-2-methyl-piperazine (700 mg, 7.0 mmol, Aldrich) reacted under the conditions of Example 3a to give the title compound as a light-yellow solid. MS (ESI, pos. ion) m/z: 247 (M+1).
A mixture of the piperazine from step (a) above (148 mg, 0.6 mmol) and 7-bromo-2-chloro-5-trifluoromethyl-1H-benzoimidazole (150 mg, 0.5 mmol, Example 6b) in dioxane (2 mL) reacted under the conditions of Example 3c to give the title compound. Mp: 135-137° C. MS (ESI, pos. ion) m/z: 510 (M+1)
A mixture of (5,6-dichloro-pyridin-3-yl)-methanol (356 mg, 2.0 mmol, Aldrich) and (R)-(−)-2-methyl-piperazine (240 mg, 2.4 mmol, Aldrich reacted under the conditions of Example 3a to give the title compound. MS (ESI, pos. ion) m/z: 242 (M+1).
A mixture of {5-chloro-6-[(3R)-3-methyl-piperazin-1-yl]-pyridin-3-yl}-methanol from step (a) above (96 mg, 0.4 mmol) and 2-chloro-6-trifluoromethyl-1H-benzoimidazole (71 mg, 0.32 mmol, Example 1c) in dioxane (2 mL) reacted under the conditions of Example 3c to give the title compound. MS (ESI, pos. ion) m/z: 426 (M+1).
A mixture of 7-bromo-2-chloro-5-trifluoromethyl-1H-benzoimidazole (96 mg, 0.32 mmol, Example 6b) and {5-chloro-6-[(3R)-3-methyl-piperazin-1-yl]-pyridin-3-yl}-methanol (96 mg, 0.4 mmol, Example 150a) in dioxane (2 mL) reacted under the conditions of Example 3c to give the title compound. MS (ESI, pos. ion) m/z: 506 (M+1).
A mixture of 2-chloro-6-trifluoromethyl-1H-benzoimidazole (176 mg, 0.8 mmol, Example 1c) and (3R)-3-methyl-1-(3-trifluoromethyl-pyridin-2-yl)-piperazine (245 mg, 1.0 mmol, Example 79a) in dioxane (2 mL) reacted under the conditions of Example 3c to give the title compound. MS (ESI, pos. ion) m/z: 430 (M+1).
To a solution of (5,6-dichloro-pyridin-3-yl)-methanol (356 mg, 2.0 mmol, Aldrich) and iodomethane (0.25 mL, 4.0 mmol, Aldrich) in DMF (3.0 mL) was added NaH (120 mg, 3.0 mmol, Aldrich, 60% dispersion in mineral oil) portionwise with stirring at room temperature. The mixture was stirred for 30 min at room temperature, saturated aqueous solution of NH4Cl (10 mL) was added, and the mixture was extracted with EtOAc (2×30 mL). The combined organic phases were washed with water (5 mL) and brine (5 mL), dried over Na2SO4, and filtered. The solvent was removed in vacuo and the residue was purified by silica gel column chromatography, eluting with 20% EtOAc/hexane to give the title compound. MS (ESI, pos. ion) m/z: 192 (M+1).
A mixture of 2,3-dichloro-5-methoxymethyl-pyridine from step (a) above (370 mg, 1.93 mmol) and (R)-(−)-2-methyl-piperazine (231 mg, 2.3 mmol, Aldrich) reacted under the condition of Example 3a to give the title compound. MS (ESI, pos. ion) m/z: 256 (M+1).
A mixture of (3R)-1-(3-chloro-5-methoxymethyl-pyridin-2-yl)-3-methyl-piperazine from step (b) above (153 mg, 0.6 mmol) and 2-chloro-6-trifluoromethyl-1H-benzoimidazole (153 mg, 0.48 mmol, Example 1c) in dioxane (2 mL) reacted under the conditions of Example 3c to give the title compound. MS (ESI, pos. ion) m/z: 440 (M+1).
A mixture of (5,6-dichloro-pyridin-3-yl)-methanol (1.78 g, 10 mmol, TCI-US) and MnO2 (17.39 g, 200 mmol, Aldrich) in 1:1 CH2Cl2/hexane (10 mL) was stirred at room temperature for 1 h. The catalyst was filtered and washed with 50% EtOAc/hexane. The filtrate was evaporated and the residue dried in vacuo to give the title compound product, which was used in the next step without additional purification. MS (ESI, pos. ion) m/z: 176 (M+1).
MeMgBr (2.5 mL, 7.5 mmol, 3.0 M in ether, Aldrich) was added dropwise to a solution of 5,6-dichloro-pyridine-3-carbaldehyde from step (a) above (880 mg, 5.0 mmol) in THF (20 mL, Aldrich) with stirring at 0° C. The mixture was stirred at 0° C. for 30 min, saturated aqueous solution of NH4Cl (20 mL) was added, and the mixture was extracted with EtOAc (2×40 mL). The combined organic extracts were washed with brine (20 mL), dried over Na2SO4 and filtered. The filtrate was concentrated in vacuo and the residue was purified by silica gel column chromatography, eluting with 40% EtOAc/hexane to give the title compound. MS (ESI, pos. ion) m/z: 192 (M+1).
1-(5,6-Dichloro-pyridin-3-yl)-ethanol from step (b) above (192 mg, 1.0 mmol) and (R)-(−)-2-methyl-piperazine (110 mg, 1.1 mmol, Aldrich) reacted under the conditions of Example 3a to give the title compound as a mixture of diastereoisomers. MS (ESI, pos. ion) m/z: 256 (M+1).
The diasteroisomeric mixture from step (c) above (128 mg, 0.5 mmol) and 2-chloro-6-trifluoromethyl-1H-benzoimidazole (88 mg, 0.4 mmol, Example 1c) in ethanol (2 mL) reacted under the conditions of Example 3c to give the title compound as a mixture of diastereoisomers. MS (ESI, pos. ion) m/z: 440 (M+1).
CBr4 (497 mg, 1.5 mmol, Aldrich) was added portionwise to a solution of (5,6-dichloro-pyridin-3-yl)-methanol (178 mg, 1.0 mmol, TCI-US) and PPh3 (393 mg, 1.5 mmol, Aldrich) in CH3CN (3 mL) with stirring at room temperature. The mixture was stirred at room temperature for 30 min, the solvent was removed in vacuo and the residue was purified by silica gel column chromatography, eluting with 10% EtOAc/hexane to give the title compound. MS (ESI, pos. ion) m/z: 242 (M+1).
A mixture of 5-bromomethyl-2,3-dichloro-pyridine from step (a) above (121 mg, 0.5 mmol) and potassium phthalimide (139 mg, 0.75 mmol, Aldrich) in DMF (1 mL) was stirred at room temperature for 30 min. Water (5 mL) was added and the mixture was extracted with EtOAc (2×20 mL). The combined organic extracts were washed with water (5 mL) and brine (5 mL), dried over Na2SO4, and filtered. The filtrate was evaporated in vacuo and the residue was suspended in 20% EtOAc/hexane, and filtered. The solid was washed with 20% EtOAc/hexane and dried in vacuo to give the title compound. MS (ESI, pos. ion) m/z: 307 (M+1).
A mixture of 2-(5,6-dichloro-pyridin-3-ylmethyl)-isoindole-1,3-dione from step (b) above (307 mg, 1.0 mmol) and methylamine (1.0 mL, 2.0 mmoL, 2.0 M in THF, Aldrich) in EtOH (10 mL) was stirred at room temperature for 4 days. The solvent was removed in vacuo to give the title compound, which was used in the next step without additional purification.
To a mixture of the amine from step (c) above (1.77 g, 10 mmol) and Et3N (2.78 mL, 20 mmol, Aldrich) was added Ac2O dropwise with stirring at room temperature. The mixture was stirred for 30 min at room temperature, diluted with EtOAc (30 mL), washed with water (20 mL) and brine (20 mL), dried over Na2SO4, and filtered. The filtrate was evaporated in vacuo and the residue was purified by silica gel column chromatography, eluting with 80% EtOAc/hexane to give the title compound. MS (ESI, pos. ion) m/z: 219 (M+1).
A mixture of N-(5,6-dichloro-pyridin-3-ylmethyl)-acetamide from step (d) above (250 mg, 1.14 mmol) and (R)-(−)-2-methyl-piperazine (126 mg, 1.26 mmol, Aldrich) reacted under the conditions of Example 3a to give the title compound. MS (ESI, pos. ion) m/z: 283 (M+1).
A mixture of 2-chloro-6-trifluoromethyl-1H-benzoimidazole (88 mg, 0.4 mmol, Example 1c) and N-{5-chloro-6-[(3R)-3-methyl-piperazin-1-yl]-pyridin-3-ylmethyl}-acetamide from step (e) above (141 mg, 0.5 mmol) in ethanol (2 mL) reacted under the conditions of Example 3c to give the title compound. MS (ESI, pos. ion) m/z: 467 (M+1).
NaH (41 mg, 1.0 mmol, Aldrich, 60% dispersion in mineral oil) was added portionwise to a solution of N-(5,6-dichloro-pyridin-3-ylmethyl)-acetamide (150 mg, 0.68 mmol, Example 155d) and iodomethane (0.063 mL, 1.0 mmol, Aldrich) in DMF (3.0 mL) with stirring at room temperature. The mixture was stirred for 30 min at room temperature, diluted with EtOAc (30 mL), washed with water (20 mL) and brine (20 mL), dried over Na2SO4, and filtered. The filtrate was evaporated in vacuo and the residue was purified by silica gel column chromatography, eluting with 80% EtOAc/hexane to give the title compound. MS (ESI, pos. ion) m/z: 233 (M+1).
A mixture of N-(5,6-dichloro-pyridin-3-ylmethyl)-N-methyl-acetamide from step (a) above (233 mg, 1.0 mmol) and (R)-(−)-2-methyl-piperazine (110 mg, 1.1 mmol, Aldrich) reacted under the conditions of Example 3a to give the title compound. MS (ESI, pos. ion) m/z: 297 (M+1).
A mixture of 2-chloro-6-trifluoromethyl-1H-benzoimidazole (88 mg, 0.4 mmol, Example 1c) and N-[5-chloro-6-[(3R)-3-methyl-piperazin-1-yl]-pyridin-3-ylmethyl]-N-methyl-acetamide from step (b) above (148 mg, 0.5 mmol) in ethanol (2 mL) reacted under the conditions Example 3c to give the title compound. MS (ESI, pos. ion) m/z: 481 (M+1).
A mixture of (1S,1R)-1-(5,6-dichloro-pyridin-3-yl)-ethanol (384 mg, 2.0 mmol, Example 154b) and MnO2 (3.48 g, 40 mmol, Aldrich) reacted under the conditions of Example 154a to give the title compound. MS (ESI, pos. ion) m/z: 190 (M+1).
1-(5,6-Dichloro-pyridin-3-yl)-ethanone from step (a) above (300 mg, 1.58 mmol) reacted with MeMgBr (0.79 mL, 2.4 mmol, 3.0 M in ether, Aldrich) under the conditions of Example 154b to give the title compound. MS (ESI, pos. ion) m/z: 206 (M+1).
A mixture of 2-(5,6-dichloro-pyridin-3-yl)-propan-2-ol from step (b) above (140 mg, 0.68 mmol) and (R)-(−)-2-methyl-piperazine (75 mg, 0.75 mmol, Aldrich) reacted under the conditions of Example 3a to give the title compound. MS (ESI, pos. ion) m/z: 270 (M+1).
A mixture of 2-chloro-6-trifluoromethyl-1H-benzoimidazole (58 mg, 0.26 mmol, Example 1c) and 2-[5-chloro-6-[(3R)-3-methyl-piperazin-1-yl]-pyridin-3-yl]-propan-2-ol from step (c) above (90 mg, 0.33 mmol) in ethanol (1 mL) reacted under the conditions of Example 3c to give the title compound. MS (ESI, pos. ion) m/z: 454 (M+1).
A mixture of 4-bromo-2-[(2R)-4-(3,5-dichloro-pyridin-2-yl)-2-methyl-piperazin-1-yl]-6-trifluoromethyl-1H-benzoimidazole (204 mg, 0.4 mmol, Example 149b), 4-trifluoromethylphenylboronic acid (152 mg, 0.8 mmol, Aldrich), Pd(PPh3)4 (46 mg, 0.04 mmol, Aldrich) and Na2CO3 (2 mL, 0.8 mmol, 0.4 M in H2O) in MeCN (4 mL) was heated at 90° C. with stirring for 16 h. Water (10 mL) was added and the mixture was extracted with EtOAc (2×30 mL). The combined organic extracts were washed with brine (5 mL), dried over Na2SO4 and filtered. The filtrate was evaporated in vacuo and the residue was purified by silica gel column chromatography, eluting with 10% EtOAc/hexane to give the title compound. MS (ESI, pos. ion) m/z: 574 (M+1).
4-Bromo-2-[(2R)-4-(3,5-dichloro-pyridin-2-yl)-2-methyl-piperazin-1-yl]-6-trifluoromethyl-1H-benzoimidazole (204 mg, 0.4 mmol, Example 149b) and 4-chlorophenylboronic acid (124 mg, 0.8 mmol, Aldrich) reacted under the conditions of Example 158 to give the title compound. MS (ESI, pos. ion) m/z: 504 (M+1).
4-Bromo-2-[(2R)-4-(3,5-dichloro-pyridin-2-yl)-2-methyl-piperazin-1-yl]-6-trifluoromethyl-1H-benzoimidazole (204 mg, 0.4 mmol, Example 149b) and 4,5,6-trifluorophenylboronic acid (141 mg, 0.8 mmol, Aldrich) reacted under the conditions of Example 158 to give the title compound. MS (ESI, pos. ion) m/z: 504 (M+1).
{6-[(3R)-4-(7-Bromo-5-trifluoromethyl-1H-benzoimidazol-2-yl)-3-methyl-piperazin-1-yl]-5-chloro-pyridin-3-yl}-methanol (152 mg, 0.3 mmol, Example 151) and 4-trifluoromethylphenylboronic acid (114 mg, 0.6 mmol, Aldrich) reacted under the conditions of Example 158 to give the title compound. MS (ESI, pos. ion) m/z: 570 (M+1).
{6-[(3R)-4-(7-Bromo-5-trifluoromethyl-1H-benzoimidazol-2-yl)-3-methyl-piperazin-1-yl]-5-chloro-pyridin-3-yl}-methanol (152 mg, 0.3 mmol, Example 151) and 4,5,6-trifluorophenylboronic acid (106 mg, 0.6 mmol, Aldrich) reacted under the conditions of Example 158 to give the title compound. MS (ESI, pos. ion) m/z: 556 (M+1).
{6-[(3R)-4-(7-Bromo-5-trifluoromethyl-1H-benzoimidazol-2-yl)-3-methyl-piperazin-1-yl]-5-chloro-pyridin-3-yl}-methanol (152 mg, 0.3 mmol, Example 151) and 3-diethylboranyl-pyridine (118 mg, 0.6 mmol, Aldrich) reacted under the conditions of Example 158 to give the title compound. MS (ESI, pos. ion) m/z: 503 (M+1).
{6-[(3R)-4-(7-Bromo-5-trifluoromethyl-1H-benzoimidazol-2-yl)-3-methyl-piperazin-1-yl]-5-chloro-pyridin-3-yl}-methanol (152 mg, 0.3 mmol, Example 151) and 4-chlorolphenylboronic acid (94 mg, 0.6 mmol, Aldrich) reacted under the conditions of Example 158 to give the title compound. MS (ESI, pos. ion) m/z: 536 (M+1).
4-Bromo-2-[(2R)-4-(3,5-dichloro-pyridin-2-yl)-2-methyl-piperazin-1-yl]-6-trifluoromethyl-1H-benzoimidazole (204 mg, 0.4 mmol, Example 149b) and 3-diethylboranyl-pyridine (118 mg, 0.8 mmol, Aldrich) reacted under the conditions of Example 158 to give the title compound. MS (ESI, pos. ion) m/z: 510 (M+1).
7-Bromo-2-chloro-5-trifluoromethyl-1H-benzoimidazole (902 mg, 3.0 mmol, Example 6b) reacted with the diasteromeric mixture of (1S)-1-[5-chloro-6-[(3R)-3-methyl-piperazin-1-yl]-pyridin-3-yl]-ethanol and (1R)-1-[5-chloro-6-[(3R)-3-methyl-piperazin-1-yl]-pyridin-3-yl]-ethanol (766 mg, 3.0 mmol, Example 154c) in ethanol (2 mL) under the conditions of Example 3c to give the title compound as a mixture of diastereoisomers. MS (ESI, pos. ion) m/z: 518 (M+1).
The diastereoisomeric mixture from step (a) above (104 mg, 0.2 mmol) and 4,5,6-trifluorophenylboronic acid (70 mg, 0.4 mmol, Aldrich) reacted under the conditions of Example 158 to give the title compound as a mixture of diastereoisomers. MS (ESI, pos. ion) m/z: 570 (M+1).
The diastereoisomeric mixture of (1S)-1-{6-[(3R)-4-(7-bromo-5-trifluoromethyl-1H-benzoimidazol-2-yl)-3-methyl-piperazin-1-yl]-5-chloro-pyridin-3-yl}-ethanol and (1R)-1-{6-[(3R)-4-(7-bromo-5-trifluoromethyl-1H-benzoimidazol-2-yl)-3-methyl-piperazin-1-yl]-5-chloro-pyridin-3-yl}-ethanol (104 mg, 0.2 mmol, Example 166a) reacted with 4-trifluoromethylphenylboronic acid (76 mg, 0.4 mmol, Aldrich) under the conditions of Example 158 to give the title compound as a mixture of diastereoisomers. MS: (ESI, pos. ion) m/z: 584 (M+1).
The diastereoisomeric mixture of (1S)-1-{6-[(3R)-4-(7-bromo-5-trifluoromethyl-1H-benzoimidazol-2-yl)-3-methyl-piperazin-1-yl]-5-chloro-pyridin-3-yl}-ethanol and (1R)-1-{6-[(3R)-4-(7-bromo-5-trifluoromethyl-1H-benzoimidazol-2-yl)-3-methyl-piperazin-1-yl]-5-chloro-pyridin-3-yl}-ethanol (104 mg, 0.2 mmol, Example 166a) reacted with 4-chlorophenylboronic acid (63 mg, 0.4 mmol, Aldrich) under the conditions of Example 158 to give the title compound as a mixture of diastereoisomers. MS (ESI, pos. ion) m/z: 550 (M+1).
The diastereoisomeric mixture of (1S)-1-{6-[(3R)-4-(7-bromo-5-trifluoromethyl-1H-benzoimidazol-2-yl)-3-methyl-piperazin-1-yl]-5-chloro-pyridin-3-yl}-ethanol and (1R)-1-{6-[(3R)-4-(7-bromo-5-trifluoromethyl-1H-benzoimidazol-2-yl)-3-methyl-piperazin-1-yl]-5-chloro-pyridin-3-yl}-ethanol (104 mg, 0.2 mmol, Example 166a) reacted with 3-diethylboranyl-pyridine (59 mg, 0.4 mmol, Aldrich) under the conditions of Example 158 to give 32 mg (31%) of product as a mixture of diastereoisomers. MS (ESI, pos. ion) m/z: 517 (M+1).
4-Amino-6-trifluoromethyl-1,3-dihydro-benzoimidazol-2-one (2.17 g, 10 mmol, Example 61a) and 3,4,5-trifluoro-benzoic acid (1.94 g, 11 mmol, Aldrich) reacted under the conditions of Example 65 to give the title compound as a white solid. MS (ESI, pos. ion) m/e: 376 (M+1), (ESI, neg. ion) m/z: 374 (M−1)
3,4,5-Trifluoro-N-(2-oxo-6-trifluoromethyl-2,3-dihydro-1H-benzoimidazol-4-yl)-benzamide from step (c) above (1.12 g, 3.0 mmol) reacted with POCl3 (5 mL, Aldrich) under the conditions of Example 1c to give the title compound as a white solid. MS (ESI, pos. ion) m/e: 393.7 (M+1), (ESI, neg. ion) m/z: 392 (M−1).
A mixture of {5-chloro-6-[(3R)-3-methyl-piperazin-1-yl]-pyridin-3-yl}-methanol (530 mg, 2.2 mmol, Example 150a) and N-(2-chloro-6-trifluoromethyl-3H-benzoimidazol-4-yl)-3,4,5-trifluoro-benzamide from step (d) above (787 mg, 2.0 mmol) in EtOH (2 mL, Aldrich) reacted under the conditions of Example 3c to give the title compound as a white solid. MS (ESI, pos. ion) m/e: 599 (M+1).
To a solution of N-{2-[(2R)-4-(3-chloro-5-hydroxymethyl-pyridin-2-yl)-2-methyl-piperazin-1-yl]-6-trifluoromethyl-3H-benzoimidazol-4-yl}-3,4,5-trifluoro-benzamide (120 mg, 0.2 mmol, Example 170c) in THF (1 mL) was added BH3. THF (0.6 mL, 0.6 mmol, Aldrich) dropwise with stirring at 0° C. The mixture was heated at reflux for 5 h, cooled to room temperature and diluted with 1:1 mixture of MeOH and 1N NaOH (2 mL). The mixture was stirred at room temperature for 30 min and extracted with EtOAc (2×20 mL). The combined organic extracts were washed with brine (10 mL), dried over Na2SO4 and filtered. The filtrate was evaporated in vacuo and the residue was purified by silica gel column chromatography, eluting with 5% MeOH/CH2Cl2 to give the title compound as a white solid. MS (ESI, pos. ion) m/e: 586 (M+1).
Benzyl chloroformate (3.1 mL, 22 mmol, Aldrich) was added dropwise over a period of 5 min to a mixture of piperazine-2-carboxylic acid dihydrochloride (2.03 g, 10 mmol, Aldrich) and Na2CO3 (4.24 g, 40 mmol) in water (10 mL) with stirring at 0° C. The mixture was stirred at 0° C. for 1 h, 2N HCl (10 mL) was added and the mixture was extracted with EtOAc (3×40 mL). The combined organic extracts were washed with water (10 mL) and brine (20 mL), dried over Na2SO4, and filtered. The filtrate was evaporated in vacuo to give the title compound as a gum, which was used for the next step without additional purification. MS (ESI, pos. ion) m/e: 399 (M+1).
Piperazine-1,2,4-tricarboxylic acid 1,4-dibenzyl ester from step (a) above and methylamine (5.5 mL, 11 mmol, Aldrich) reacted under the conditions of Example 61a to give the title compound as a gum. MS (ESI, pos. ion) m/e: 412 (M+1).
A suspension of 2-methylcarbamoyl-piperazine-1,4-dicarboxylic acid dibenzyl ester from step (b) above (1.64 g, 4.0 mmol) and 10% Pd/C (42 mg, 0.04 mmol, Aldrich) in ethanol (10 mL) was vigorously stirred under hydrogen atmosphere for 4 h at room temperature. The catalyst was filtered through Celite® pad and the filter cake was washed with EtOH. The filtrate was evaporated in vacuo to give the title compound, which was used in the next step without additional purification. MS (ESI, pos. ion) m/e: 144 (M+1).
piperazine-2-carboxylic acid methylamide from step (c) above (570 mg, 4.0 mmol) and (5,6-dichloro-pyridin-3-yl)-methanol (710 mg, 4.0 mmol, TCI-US) reacted under the conditions of Example 3a to give the title compound as a light-yellow gum. MS ESI, pos. ion) m/e: 285 (M+1).
A mixture of 4-(3-chloro-5-hydroxymethyl-pyridin-2-yl)-piperazine-2-carboxylic acid methylamide from step (d) above (114 mg, 0.4 mmol) and 2-chloro-6-trifluoromethyl-4-(3,4,5-trifluoro-phenyl)-1H-benzoimidazole (140 mg, 0.4 mmol, Example 51b) in EtOH (1 mL) reacted under the conditions of Example 3c to give the title compound as a white solid. MS ESI, pos. ion) m/e: 599 (M+1).
The diastereoisomeric mixture of (1S)-1-{6-[(3R)-4-(4-bromo-6-trifluoromethyl-1H-benzoimidazol-2-yl)-3-methyl-piperazin-1-yl]-5-chloro-pyridin-3-yl}-ethanol and (1R)-1-{6-[(3R)-4-(4-bromo-6-trifluoromethyl-1H-benzoimidazol-2-yl)-3-methyl-piperazin-1-yl]-5-chloro-pyridin-3-yl}-ethanol (416 mg, 0.8 mmol, Example 166a) reacted with 3,4,5-trifluorophenylboronic acid (282 mg, 1.6 mmol, Lancaster) under the conditions of Example 158 to give the title compound as a mixture of diastereoisomers. Separation of the mixture by preparative HPLC on a Chiralcel OD column, eluting with 9:1 hexane/EtOH afforded the fast running title compound. The configuration (1S) was assigned at random. (ESI, neg. ion) m/z: 570 (M−1).
The title compound was isolated by preparative HPLC separation of the diastereoisomeric mixture of products of Example 173. The (1R) configuration assignment was based on the randomly assigned (1S) configuration of the diastereoisomer described in Example 173. (ESI, neg. ion) m/z: 570 (M−1).
A mixture of {5-chloro-6-[(3R)-3-methyl-piperazin-1-yl]-pyridin-3-yl}-methanol (1.21 g, 5.0 mmol, Example 150a) and 2-chloro-7-nitro-5-trifluoromethyl-1H-benzoimidazole (1.33 g, 5.0 mmol, Example 57c) in EtOH (4 mL) reacted under the conditions of Example 3c to give the title compound as a yellow solid. MS (ESI, pos. ion) m/e: 471 (M+1).
{5-Chloro-6-[(3R)-3-methyl-4-(7-nitro-5-trifluoromethyl-1H-benzoimidazol-2-yl)-piperazin-1-yl]-pyridin-3-yl}-methanol from step (a) above (942 mg, 2.0 mmol) was hydrogenated under the conditions of Example 57a to give 847 mg (96%) the title compound as a yellow gum. MS (ESI, pos. ion) m/e: 441 (M+1).
{6-[(3R)-4-(7-Amino-5-trifluoromethyl-1H-benzoimidazol-2-yl)-3-methyl-piperazin-1-yl]-5-chloro-pyridin-3-yl}-methanol from step (b) above (221 mg, 0.5 mmol) and 4-trifluoromethyl-benzoic acid (105 mg, 0.55 mmol, Aldrich) reacted under the conditions of Example 65 to give the title compound as a white solid. MS (ESI, pos. ion) m/e: 613 (M+1).
{6-[(3R)-4-(7-Amino-5-trifluoromethyl-1H-benzoimidazol-2-yl)-3-methyl-piperazin-1-yl]-5-chloro-pyridin-3-yl}-methanol from (221 mg, 0.5 mmol, Example 175b) and cyclohexanecarboxylic acid (71 mg, 0.55 mmol, Aldrich) reacted under the conditions of Example 65 to give the title compound as a white solid. MS (ESI, pos. ion) m/e: 551 (M+1).
{6-[(3R)-4-(7-Amino-5-trifluoromethyl-1H-benzoimidazol-2-yl)-3-methyl-piperazin-1-yl]-5-chloro-pyridin-3-yl}-methanol (221 mg, 0.5 mmol, Example 175b) and 4-chloro-benzoic acid (86 mg, 0.55 mmol, Aldrich) reacted under the conditions of Example 65 to give the title compound as a white solid. MS (ESI, pos. ion) m/e: 579 (M+1).
A solution of 5,6-dichloro-nicotinic acid (1.92 g, 10 mmol, Aldrich) and p-toluenesulfonic acid monohydrate (190 mg, 1.0 mmol, Aldrich) in methanol (5 mL, Aldrich) was heated at reflux for 25 h. The reaction mixture was cooled to room temperature, the solvent was removed in vacuo and the residue was dissolved in EtOAc (50 mL). The solution was washed with satd. NaHCO3 (20 mL) and brine (20 mL), dried over Na2SO4, and filtered. The filtrate was evaporated in vacuo and the residue was purified by silica gel column chromatography, eluting with 30% EtOAc/hexane to give the title compound as a white solid. MS ESI, pos. ion) m/e: 205 (M+1).
5,6-Dichloro-nicotinic acid methyl ester from step (a) above (1.23 g, 6.0 mmol) and (R)-(−)-2-methyl-piperazine (667 mg, 6.6 mmol, Aldrich) reacted under the conditions of Example 3a to give the title compound as a white solid. MS ESI, pos. ion) m/e: 270 (M+1).
5-Chloro-6-[(3R)-3-methyl-piperazin-1-yl]-nicotinic acid methyl ester from step (b) above (271 mg, 1.0 mmol) and 2-chloro-6-trifluoromethyl-4-(3,4,5-trifluoro-phenyl)-1H-benzoimidazole (350 mg, 1.0 mmol, Example 51b) reacted under the conditions of Example 3c to give the title compound as a white solid. MS ESI, pos. ion) m/e: 584 (M+1).
{6-[(3R)-4-(7-Amino-5-trifluoromethyl-1H-benzoimidazol-2-yl)-3-methyl-piperazin-1-yl]-5-chloro-pyridin-3-yl}-methanol (221 mg, 0.5 mmol, Example 175b) and cyclohexanecarbaldehyde (62 mg, 0.55 mmol, Aldrich) reacted under the conditions of Example 59 to give the title compound as a light-yellow solid. MS (ESI, pos. ion) m/e: 633 (M+1).
The title compound was formed as a second product of the reaction described in Example 179 and isolated as a light-yellow solid. Yield 112 mg (42%). MS (ESI, pos. ion) m/e: 537 (M+1).
(5-Chloro-6-{(3R)-3-methyl-4-[6-trifluoromethyl-4-(3,4,5-trifluoro-phenyl)-1H-benzoimidazol-2-yl]-piperazin-1-yl}-pyridin-3-yl)-methanol (110 mg, 0.2 mmol, Example 162) reacted with MnO2 (348 mg, 4.0 mmol, Aldrich) under the conditions of Example 154a to give the title compound as a gum, which is was used in the next step without additional purification. MS ESI, pos. ion) m/e: 554 (M+1).
5-Chloro-6-{(3R)-3-methyl-4-[6-trifluoromethyl-4-(3,4,5-trifluoro-phenyl)-1H-benzoimidazol-2-yl]-piperazin-1-yl}-pyridine-3-carbaldehyde from step (a) above (88 mg, 0.16 mmol) in THF (2 mL) reacted with C2H5MgBr under the conditions of Example 154b to give the title compound as a mixture of diastereoisomers. MS (ESI, pos. ion) m/e: 584 (M+1).
To a mixture of {6-[(3R)-4-(7-amino-5-trifluoromethyl-1H-benzoimidazol-2-yl)-3-methyl-piperazin-1-yl]-5-chloro-pyridin-3-yl}-methanol (221 mg, 1.0 mmol, Example 175b) and 1 N NaOH (1 mL) in THF (5 mL) was added di-tert-butyl dicarbonate (131 mg, 0.6 mmol, Aldrich) in one portion with stirring at room temperature. The mixture was stirred at room temperature for 30 min, diluted with water (20 mL) and extracted with EtOAc (2×40 mL). The combined organic extracts were washed with brine (20 mL), dried over Na2SO4 and filtered. The filtrate was evaporated in vacuo and the residue was purified by silica gel column chromatography, eluting with 60% EtOAc/hexane to give the title compound as a light-yellow solid. MS (ESI, pos. ion) m/e: 541 (M+1).
2-Chloro-3-trifluoromethyl-pyridine (7.26, 40 mmol, TCI-US) and (R)-(−)-2-methyl-piperazine (4.45 g, 44 mmol, Aldrich) reacted under the conditions of Example 3a to give the title compound as a gum. MS (ESI, pos. ion) m/e: 246 (M+1).
(3R)-3-Methyl-1-(3-trifluoromethyl-pyridin-2-yl)-piperazine from step (a) above (7.38 g, 30 mmol) reacted with di-tert-butyl dicarbonate under the conditions of Example 182 to give the title compound as a gum. MS (ESI, pos. ion) m/e: 346 (M+1).
Bromine (1.52 mL, 29.7 mmol, Aldrich) was added dropwise over a period of 5 min to a solution (2R)-2-methyl-4-(3-trifluoromethyl-pyridin-2-yl)-piperazine-1-carboxylic acid tert-butyl ester from step (b) above (9.34 g, 27 mmol) in dichloromethane (100 mL) with stirring at room temperature. The mixture was stirred at room temperature for 30 min, the solvent was removed in vacuo and the residue was dissolved in EtOAc (200 mL). The solution was washed with sat. NaHCO3 (50 mL) and brine (50 mL), dried over Na2SO4, and filtered. The filtrate was evaporated in vacuo and the residue was purified by silica gel column chromatography, eluting with 10% EtOAc/hexane to give the title compound as a gum. MS (ESI, pos. ion) m/e: 426 (M+1).
A mixture of (2R)-4-(5-bromo-3-trifluoromethyl-pyridin-2-yl)-2-methyl-piperazine-1-carboxylic acid tert-butyl ester from step (c) above (8.48 g, 20 mmol), methyl acrylate (1.9 g, 22 mmol, Aldrich), palladium acetate (49 mg, 2.0 mmol, Aldrich) and benzyltriethyl ammonium chloride (456 mg, 2.0 mmol, Aldrich) in DMF (20 mL) was stirred at 40° C. for 18 h. The reaction mixture was cooled to room temperature, diluted with water (50 mL) and extracted with EtOAc (2×80 mL). The combined organic extracts were washed with brine (40 mL), dried over Na2SO4 and filtered. The filtrate was evaporated in vacuo and the residue was purified by silica gel column chromatography, eluting with 20% EtOAc/hexane to give the title compound as a white solid. MS (ESI, pos. ion) m/e: 430 (M+1).
A mixture of (2R)-4-[5-(2-methoxycarbonyl-vinyl)-3-trifluoromethyl-pyridin-2-yl]-2-methyl-piperazine-1-carboxylic acid tert-butyl ester from step (d) above (6.02 g, 14 mmol), OsO4 (4.43 mL, 0.7 mmol, 4% in H2O, Aldrich) and N-methylmorpholine N-oxide (1.96 g, 16.8 mmol, Aldrich) in acetone (16 mL) was stirred at room temperature for 5 h. To the mixture was added saturated aqueous solution of NaHSO3 (910 mL) and the mixture was extracted with EtOAc (2×40 mL). The combined organic extracts were washed with brine (20 mL), dried over Na2SO4 and filtered. The filtrate was evaporated in vacuo and the residue was dissolved in dichloromethane (20 mL). To the solution was added Pb(OAc)4 (7.44 g, 16.8 mmol, Aldrich) in one portion and the mixture was stirred at 0° C. for 30 min. The mixture was diluted with hexane (10 mL), filtered through a Celite® pad and the filter cake was washed with 50% EtOAc/hexane. The filtrate was evaporated in vacuo and the residue was purified by silica gel column chromatography, eluting with 30% EtOAc/hexane to give the title compound as a gum. MS (ESI, pos. ion) m/e: 374 (M+1).
To a solution of (2R)-4-(5-formyl-3-trifluoromethyl-pyridin-2-yl)-2-methyl-piperazine-1-carboxylic acid tert-butyl ester from step (e) above (4.48 g, 12 mmol) in methanol (30 mL) was added portionwise NaBH4 (542 mg, 14.4 mmol, Aldrich) with stirring at 0° C. The mixture was stirred at 0° C. for 30 min and the solvent was removed in vacuo. The residure was dissolved in EtOAc (60 mL) and washed with water (20 mL) and brine (20 mL), dried over Na2SO4, and filtered. The solvent was removed in vacuo and the residue was purified by silica gel column chromatography, eluting with 50% EtOAc/hexane to give the title compound as a gum. MS (ESI, pos. ion) m/e: 376 (M+1).
To a stirred solution of 4-(5-hydroxymethyl-3-trifluoromethyl-pyridin-2-yl)-2-methyl-piperazine-1-carboxylic acid tert-butyl ester from step (f) above (3.75 g, 10 mmol) in dichloromethane (10 mL) was added trifluoroacetic acid (10 mL, Aldrich) dropwise at 0° C. over a period of 10 min. The mixture was stirred at room temperature for 16 h and diluted with toluene (20 mL). The solvents were removed in vacuo and the residue was dissolved in EtOAc (100 mL), washed with saturated aqueous solution of NaHCO3 (2×30 mL) and brine (20 mL), dried over Na2SO4, and filtered. The solvent was evaporated in vacuo and the residue was purified by silica gel column chromatography, eluting with 90:10:1 mixture of MeOH/CH2Cl2/ammonium hydroxide to give the title compound as a white solid. MS (ESI, pos. ion) m/e: 276 (M+1).
A mixture of {5-chloro-6-[(3R)-3-methyl-piperazin-1-yl]-pyridin-3-yl}-methanol from step (g) above (825 mg, 3.0 mmol) and 2-chloro-6-trifluoromethyl-4-(3,4,5-trifluoro-phenyl)-1H-benzoimidazole (1.05 g, 3.0 mmol, Example 51b) in EtOH (5 mL) reacted under the conditions of Example 3c to give the title compound as a white solid. MS (ESI, pos. ion) m/e: 590 (M+1).
(6-{(3R)-3-Methyl-4-[6-trifluoromethyl-4-(3,4,5-trifluoro-phenyl)-1H-benzoimidazol-2-yl]-piperazin-1-yl}-5-trifluoromethyl-pyridin-3-yl)-methanol (1.18 g, 2.0 mmol, Example 183 h) reacted with MnO2 (3.48, 40 mmol, Aldrich) under the conditions of Example 154a to give the title compound as a white solid, which was used in the next step without additional purification. MS (ESI, pos. ion) m/e: 588 (M+1).
6-{(3R)-3-Methyl-4-[6-trifluoromethyl-4-(3,4,5-trifluoro-phenyl)-1H-benzoimidazol-2-yl]-piperazin-1-yl}-5-trifluoromethyl-pyridine-3-carbaldehyde from step (a) above (88 mg, 0.15 mmol) reacted with C2H5MgBr under the conditions of Example 154b to give the title compound as a mixture of diastereoisomers. MS (ESI, pos. ion) m/e: 618 (M+1).
6-{(3R)-3-Methyl-4-[6-trifluoromethyl-4-(3,4,5-trifluoro-phenyl)-1H-benzoimidazol-2-yl]-piperazin-1-yl}-5-trifluoromethyl-pyridine-3-carbaldehyde (88 mg, 0.15 mmol, Example 184a) in THF (2 mL) reacted with C2H3MgBr (0.19 mL, 0.19 mmol, Aldrich) under the conditions of Example 154b to give the title compound as a mixture of diastereoisomers. MS (pos. ion) m/e: 616 (M+1).
6-{(3R)-3-Methyl-4-[6-trifluoromethyl-4-(3,4,5-trifluoro-phenyl)-1H-benzoimidazol-2-yl]-piperazin-1-yl}-5-trifluoromethyl-pyridine-3-carbaldehyde (88 mg, 0.15 mmol, Example 184a) reacted with C3H7MgBr (0.09 mL, 0.18 mmol, Aldrich) under the conditions of Example 154b to give the title compound as a mixture of diastereoisomers. MS (ESI, pos. ion) m/e: 632 (M+1).
6-{(3R)-3-Methyl-4-[6-trifluoromethyl-4-(3,4,5-trifluoro-phenyl)-1H-benzoimidazol-2-yl]-piperazin-1-yl}-5-trifluoromethyl-pyridine-3-carbaldehyde (88 mg, 0.15 mmol, Example 184a) in THF (2 mL, Aldrich) reacted with CH3MgBr (0.06 mL, 0.19 mmol, Aldrich) under the conditions of Example 154b to give the title compound as a mixture of diastereoisomers. MS ESI, pos. ion) m/e: 604 (M+1).
6-{(3R)-3-Methyl-4-[6-trifluoromethyl-4-(3,4,5-trifluoro-phenyl)-1H-benzoimidazol-2-yl]-piperazin-1-yl}-5-trifluoromethyl-pyridine-3-carbaldehyde (88 mg, 0.15 mmol, Example 184a) reacted with C6H5MgBr (0.19 mL, 0.19 mmol, Aldrich) under the conditions of Example 154b to give the title compound as a mixture of diastereoisomers. MS ESI, pos. ion) m/e: 666 (M+1).
4-Bromo-6-trifluoromethyl-1,3-dihydro-benzoimidazol-2-one 562 mg, 2.0 mmol, Example 6a) reacted with 4-trifluoromethylphenylboronic acid (760 mg, 4.0 mmol, Aldrich) under the conditions of Example 10 to give the title compound as a white solid. MS (ESI, neg. ion) m/z: 345 (M−1).
6-Trifluoromethyl-4-(4-trifluoromethyl-phenyl)-1,3-dihydro-benzoimidazol-2-one from step (a) above (8.6 g, 25 mmol) reacted with POCl3 (50 mL, Aldrich) under the conditions of Example 1c to give the title compound as a white solid. MS (ESI, pos. ion) m/e: 364 (M+1).
2-Chloro-6-trifluoromethyl-4-(3,4,5-trifluoro-phenyl)-1H-benzoimidazole from step (b) above (1.09 g, 3.0 mmol) reacted with {5-chloro-6-[(3R)-3-methyl-piperazin-1-yl]-pyridin-3-yl}-methanol (723 mg, 3.0 mmol, Example 183 g) under the conditions of Example 3c to give the title compound as a white solid. MS ESI, pos. ion) m/e: 570 (M+1).
(6-{(3R)-3-Methyl-4-[6-trifluoromethyl-4-(4-trifluoromethyl-phenyl)-1H-benzoimidazol-2-yl]-piperazin-1-yl}-5-trifluoromethyl-pyridin-3-yl)-methanol (422 mg, 0.7 mmol, Example 189c) reacted with MnO2 (1.22 g, 14 mmol, Aldrich) under the conditions of Example 154a to give the title compound as a white solid. MS ESI, pos. ion m/e: 602 (M+1).
6-{(3R)-3-Methyl-4-[6-trifluoromethyl-4-(4-trifluoromethyl-phenyl)-1H-benzoimidazol-2-yl]-piperazin-1-yl}-5-trifluoromethyl-pyridine-3-carbaldehyde from step (a) above (90 mg, 0.15 mmol) reacted with C2H5MgBr (0.19 mL, 0.19 mmol, Aldrich) under the conditions of Example 154b to give the title compound as a mixture of diastereoisomers. MS (ESI, pos. ion) m/e: 632 (M+1).
6-{(3R)-3-Methyl-4-[6-trifluoromethyl-4-(4-trifluoromethyl-phenyl)-1H-benzoimidazol-2-yl]-piperazin-1-yl}-5-trifluoromethyl-pyridine-3-carbaldehyde (90 mg, 0.15 mmol, Example 190a) reacted with C2H3MgBr (0.19 mL, 0.19 mmol, Aldrich) under the conditions of Example 154b to give the title compound as a mixture of diastereoisomers. MS (ESI, pos. ion) m/e: 630 (M+1).
1-(5-Bromo-3-trifluoromethyl-pyridin-2-yl)-piperazine (3.4 g, 11 mmol, Example 143a) reacted with di-tert-butyl dicarbonate under the conditions of Example 182 to give the title compound as a white solid. MS (ESI, pos. ion) m/e: 310 (M-Bu+1).
4-(5-Bromo-3-trifluoromethyl-pyridin-2-yl)-piperazine-1-carboxylic acid tert-butyl ester from step (a) above (3.7 g, 9.0 mmol) reacted with methyl acrylate under the conditions of Example 183d to give the title compound as a white solid. MS (ESI, pos. ion) m/e: 316 (M−Bu+1).
4-[5-(2-Methoxycarbonyl-vinyl)-3-trifluoromethyl-pyridin-2-yl]-piperazine-1-carboxylic acid tert-butyl ester from step (b) above (2.5 g, 6.0 mmol) reacted with OsO4 (1.9 mL, 0.3 mmol, Aldrich) to give a diol intermediate, which was treated with Pb(OAc)4 (3.19 g, 7.2 mmol, Aldrich) under the conditions of Example 183e to give the title compound as a gum. MS (ESI, pos. ion) m/e: 260 (M−Bu+1).
4-(5-Formyl-3-trifluoromethyl-pyridin-2-yl)-piperazine-1-carboxylic acid tert-butyl ester from step (c) above (1.44 g, 4.0 mmol) reacted with NaBH4 (180 mg, 4.8 mmol, Aldrich) under the conditions of Example 183f to give the title compound as a gum. MS (ESI, pos. ion) m/e: 262 (M−Bu+1).
4-(5-Hydroxymethyl-3-trifluoromethyl-pyridin-2-yl)-piperazine-1-carboxylic acid tert-butyl ester from step (d) above (1.08 g, 3.0 mmol) reacted with TFA (10 mL, Aldrich) under the conditions of Example 183 g to give the title compound as a white solid. MS (ESI, pos. ion) m/e: 262 (M+1).
A mixture of (6-piperazin-1-yl-5-trifluoromethyl-pyridin-3-yl)-methanol from step (e) above (131 mg, 0.5 mmol) and 2-chloro-6-trifluoromethyl-4-(3,4,5-trifluoro-phenyl)-1H-benzoimidazole (175 mg, 0.5 mmol, Example 51b) in EtOH (2 mL) reacted under the conditions of Example 3c to give the title compound as a white solid. MS (ESI, pos. ion) m/e: 576 (M+1).
A mixture of (6-piperazin-1-yl-5-trifluoromethyl-pyridin-3-yl)-methanol (131 mg, 0.5 mmol, Example 192e) and 2-chloro-6-trifluoromethyl-4-(3,4,5-trifluoro-phenyl)-1H-benzoimidazole (181 mg, 0.5 mmol, Example 189b) in EtOH (2 mL) reacted under the conditions of Example 3c to give the title compound as a white solid. MS (ESI, pos. ion) m/e: 590 (M+1), (ESI, neg. ion) m/z: 588 (M−1).
6-{(3R)-3-Methyl-4-[6-trifluoromethyl-4-(4-trifluoromethyl-phenyl)-1H-benzoimidazol-2-yl]-piperazin-1-yl}-5-trifluoromethyl-pyridine-3-carbaldehyde (90 mg, 0.15 mmol, Example 190a) reacted with CH3MgBr (0.07 mL, 0.19 mmol, Aldrich) under the conditions of Example 154b to give the title compound as a mixture of diastereoisomers. MS (ESI, pos. ion) m/e: 618 (M+1).
A mixture of 5-chloro-6-{(3R)-3-methyl-4-[6-trifluoromethyl-4-(3,4,5-trifluoro-phenyl)-1H-benzoimidazol-2-yl]-piperazin-1-yl}-nicotinic acid methyl ester (58 mg, 0.1 mmol, Example 178c) and 1N NaOH (0.11 mL) in THF (1 mL) was stirred at 50° C. for 16 h. 1N HCl (0.11 mL) was added and the mixture was extracted with EtOAc (2×20 mL). The combined organic extracts were washed with brine (5 mL), dried over Na2SO4 and filtered. The filtrate was evaporated in vacuo and the residue was purified by silica gel column chromatography, eluting with 10% MeOH/EtOAc to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/e: 570 (M+1).
7-Bromo-2-[(2R)-4-(3-chloropyridin-2-yl)-2-methylpiperazin-1-yl]-5-(trifluoromethyl)-1H-benzoimidazole (95 mg, 0.2 mmol, Example 77) and 3,5-difluoro-phenylboronic acid (39 mg, 0.25 mmol, Aldrich) reacted under the conditions of Example 51a to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 508 (M+1).
The title compound was isolated as a side product of the reaction described in Example 196. MS (ESI, pos. ion) m/z: 586 (M+1).
7-Bromo-2-[(2R)-4-(3-chloropyridin-2-yl)-2-methylpiperazin-1-yl]-5-(trifluoromethyl)-1H-benzoimidazole (95 mg, 0.2 mmol, Example 77) and 3-fluoro-phenylboronic acid (35 mg, 0.25 mmol, Aldrich) reacted under the conditions of Example 51a to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 490 (M+1).
The title compound was isolated as a side product of the reaction described in Example 198. MS (ESI, pos. ion) m/z: 550 (M+1).
7-Bromo-2-[(2R)-4-(3-chloropyridin-2-yl)-2-methylpiperazin-1-yl]-5-(trifluoromethyl)-1H-benzoimidazole (95 mg, 0.2 mmol, Example 77) and 4-(N,N-dimethylamino)phenylboronic acid (41 mg, 0.25 mmol, Aldrich) reacted under the conditions of Example 51a to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 515 (M+1).
7-Bromo-2-[(2R)-4-(3-chloropyridin-2-yl)-2-methylpiperazin-1-yl]-5-(trifluoromethyl)-1H-benzoimidazole (95 mg, 0.2 mmol, Example 77) and 4-(trifluoromethyl)phenylboronic acid (47 mg, 0.25 mmol, Aldrich) reacted under the conditions of Example 51a to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 515 (M+1).
7-Bromo-2-[(2R)-4-(3-chloropyridin-2-yl)-2-methylpiperazin-1-yl]-5-(trifluoromethyl)-1H-benzoimidazole (95 mg, 0.2 mmol, Example 77) and 4-fluoro-phenylboronic acid (35 mg, 0.25 mmol, Aldrich) reacted under the conditions of Example 51a to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 490 (M+1).
A mixture of 2,3-diamino-5-bromopyridine (0.94 g, 5 mmol, Aldrich) and disuccinimido carbonate (1.28 g, 5 mmol, Aldrich) in chloroform (50 mL) was heated at reflux for 12 h. The solvent was removed in vacuo and the residue was purified by recrystallization from 40% EtOAc/hexane to give the title compound as a brown solid. MS (ESI, pos. ion) m/z: 214 (M+1).
The pyridin-2-one from step (a) above (1 g, 4.7 mmol) reacted with POCl3 under the conditions of Example 1c to give the title compound as a brown solid. MS (ESI, pos. ion) m/z: 232 (M+1).
The imidazo[4,5-b]pyridine from step (b) above (46 mg, 0.2 mmol) reacted with 1-(3-trifluoromethylpyridin-2-yl)piperazine (69 mg, 0.3 mmol, Maybridge) under the conditions of Example 3c to give the title compound as a white amorphous solid. MS (ESI, pos. ion) m/z: 427 (M+1).
A mixture of 3,4-dichloro-[1,2,5]thiadiazole (30 μL, 0.32 mmol, Aldrich), 2-piperazin-1-yl-5-trifluoromethyl-7-(3,4,5-trifluoro-phenyl)-1H-benzoimidazole (65 mg, 0.16 mmol, Example 104a) and N,N-diisopropylethylamine (0.1 mL, 0.58 mmol) in 4:1 dioxane/DMSO (2.5 mL) was subjected to microwave irradiation at 190° C. for 15 min. The mixture was cooled to room temperature and filtered. The filtrate was evaporated in vacuo and the residue was purified by preparative HPLC (gradient 0.1% trifluoroacetic acid in acetonitrile) to give the title compound as an amorphous solid. MS (ESI, positive ion) m/z: 519 (M+1).
Capsaicin-Induced Ca2+ Influx in Primary Dorsal Root Ganglion Neurons
Embryonic 19 day old (E19) dorsal root ganglia (DRG) were dissected from timed-pregnant, terminally anesthetized Sprague-Dawley rats (Charles River, Wilmington, Mass.) and collected in ice-cold L-15 media (Life Technologies, Grand Island, N.Y.) containing 5% heat inactivated horse serum (Life Technologies). The DRG were then dissociated into single cell suspension using a papain dissociation system (Worthington Biochemical Corp., Freehold, N.J.). The dissociated cells were pelleted at 200×g for 5 min and re-suspended in EBSS containing 1 mg/ml ovomucoid inhibitor, 1 mg/ml ovalbumin and 0.005% DNase. Cell suspension was centrifuged through a gradient solution containing 10 mg/ml ovomucoid inhibitor, 10 mg/ml ovalbumin at 200×g for 6 min to remove cell debris; and filtered through a 88-μm nylon mesh (Fisher Scientific, Pittsburgh, Pa.) to remove any clumps. Cell number was determined with a hemocytometer and cells were seeded into poly-ornithine 100 μg/ml (Sigma) and mouse laminin 1 μg/ml (Life Technologies)-coated 96-well plates at 10×103 cells/well in complete medium. The complete medium consists of minimal essential medium (MEM) and Ham's F12, 1:1, penicillin (100 U/ml), and streptomycin (100 μg/ml), and nerve growth factor (10 ng/ml), 10% heat inactivated horse serum (Life Technologies). The cultures were kept at 37° C., 5% CO2 and 100% humidity. For controlling the growth of non-neuronal cells, 5-fluoro-2′-deoxyuridine (75 μM) and uridine (180 μM) were included in the medium. Activation of VR1 is achieved in these cellular assays using either a capsaicin stimulus (ranging from 0.01-10 μM) or by an acid stimulus (addition of 30 mM Hepes/Mes buffered at pH 4.1). Compounds are also tested in an assay format to evaluate their agonist properties at VR1.
Capsaicin Antagonist Assay: E-19 DRG cells at 5 days in culture are incubated with serial concentrations of VR1 antagonists, in HBSS (Hanks buffered saline solution supplemented with BSA 0.1 mg/ml and 1 mM Hepes at pH 7.4) for 15 min, 37° C. Cells are then challenged with a VR1 agonist, capsaicin 200 nM, in activation buffer containing 0.1 mg/ml BSA, 15 mM Hepes, pH 7.4, and 10 μCi/ml 45Ca2+ (Amersham) in Ham's F12 for 2 min at 37° C.
Acid Antagonist Assay: Compounds are pre-incubated with E-19 DRG cells for 2 minutes prior to addition of Calcium-45 in 30 mM Hepes/Mes buffer (Final Assay pH 5) and then left for an additional 2 minutes prior to compound washout. Final 45Ca (Amersham CES3-2mCi) at 10 μCi/mL.
Agonist Assay: Compounds are incubated with E-19 DRG cells for 2 minutes in the presence of Calcium-45 prior to compound washout. Final 45Ca2+ (Amersham CES3-2mCi) at 10 μCi/mL.
Compound Washout and Analysis: Assay plates are washed using an ELX405 plate washer (Bio-Tek Instruments Inc.) immediately after functional assay. Wash 3× with PBS Mg2+/Ca2+ free, 0.1 mg/mL BSA. Aspirate between washes. Read plates using a MicroBeta Jet (Wallac Inc.). Compound activity is then calculated using appropriate computational algorithms.
45Calcium2+ Assay Protocol
Compounds may be assayed using Chinese Hamster Ovary cell lines stably expressing either human VR1 or rat VR1 under a CMV promoter. Cells can be cultured in Growth Medium, routinely passaged at 70% confluency using trypsin and plated in the assay plate 24 hours prior to compound evaluation.
Compounds can be diluted in 100% DMSO and tested for activity over several log units of concentration [40 μM-2 pM]. Compounds may be further diluted in HBSS buffer (pH 7.4) 0.1 mg/mL BSA, prior to evaluation. Final DMSO concentration in assay would be 0.5%. Each assay plate can be controlled with a buffer only and a known antagonist compound (either capsazepine or one of the described VR1 antagonists).
Activation of VR1 can be achieved in these cellular assays using either a capsaicin stimulus (ranging from 0.1-1 μM) or by an acid stimulus (addition of 30 mM Hepes/Mes buffered at pH 4.1). Compounds may also tested in an assay format to evaluate their agonist properties at VR1.
Capsaicin Antagonist Assay: Compounds may be pre-incubated with cells (expressing either human or rat VR1) for 2 minutes prior to addition of Calcium-45 and Capsaicin and then left for an additional 2 minutes prior to compound washout. Capsaicin (0.5 nM) can be added in HAM's F12, 0.1 mg/mL BSA, 15 mM Hepes at pH 7.4. Final 45Ca (Amersham CES3-2mCi) at 10 μCi/mL.
Acid Antagonist Assay: Compounds can be pre-incubated with cells (expressing either human or rat VR1) for 2 minutes prior to addition of Calcium-45 in 30 mM Hepes/Mes buffer (Final Assay pH 5) and then left for an additional 2 minutes prior to compound washout. Final 45Ca (Amersham CES3-2mCi) at 10 μCi/mL.
Agonist Assay: Compounds can be incubated with cells (expressing either human or rat VR1) for 2 minutes in the presence of Calcium-45 prior to compound washout. Final 45Ca (Amersham CES3-2mCi) at 10 μCi/mL.
Compound Washout and Analysis: Assay plates can be washed using an ELX405 plate washer (Bio-Tek Instruments Inc.) immediately after functional assay. One can wash 3× with PBS Mg2/Ca2+ free, 0.1 mg/mL BSA, aspirating between washes. Plates may be read using a MicroBeta Jet (Wallac Inc.). Compound activity may then calculated using appropriate computational algorithms.
Useful nucleic acid sequences and proteins may be found in U.S. Pat. Nos. 6,335,180, 6, 406,908 and 6,239,267, herein incorporated by reference in their entirety.
For the treatment of vanilloid-receptor-diseases, such as acute, inflammatory and neuropathic pain, dental pain, general headache, migraine, cluster headache, mixed-vascular and non-vascular syndromes, tension headache, general inflammation, arthritis, rheumatic diseases, osteoarthritis, inflammatory bowel disorders, inflammatory eye disorders, inflammatory or unstable bladder disorders, psoriasis, skin complaints with inflammatory components, chronic inflammatory conditions, inflammatory pain and associated hyperalgesia and allodynia, neuropathic pain and associated hyperalgesia and allodynia, diabetic neuropathy pain, causalgia, sympathetically maintained pain, deafferentation syndromes, asthma, epithelial tissue damage or dysfunction, herpes simplex, disturbances of visceral motility at respiratory, genitourinary, gastrointestinal or vascular regions, wounds, burns, allergic skin reactions, pruritus, vitiligo, general gastrointestinal disorders, gastric ulceration, duodenal ulcers, diarrhea, gastric lesions induced by necrotising agents, hair growth, vasomotor or allergic rhinitis, bronchial disorders or bladder disorders, the compounds of the present invention may be administered orally, parentally, by inhalation spray, rectally, or topically in dosage unit formulations containing conventional pharmaceutically acceptable carriers, adjuvants, and vehicles. The term parenteral as used herein includes, subcutaneous, intravenous, intramuscular, intrasternal, infusion techniques or intraperitoneally.
Treatment of diseases and disorders herein is intended to also include the prophylactic administration of a compound of the invention, a pharmaceutical salt thereof, or a pharmaceutical composition of either to a subject (i.e., an animal, preferably a mammal, most preferably a human) believed to be in need of preventative treatment, such as, for example, pain, inflammation and the like.
The dosage regimen for treating vanilloid-receptor-mediated diseases, cancer, and/or hyperglycemia with the compounds of this invention and/or compositions of this invention is based on a variety of factors, including the type of disease, the age, weight, sex, medical condition of the patient, the severity of the condition, the route of administration, and the particular compound employed. Thus, the dosage regimen may vary widely, but can be determined routinely using standard methods. Dosage levels of the order from about 0.01 mg to 30 mg per kilogram of body weight per day, preferably from about 0.1 mg to 10 mg/kg, more preferably from about 0.25 mg to 1 mg/kg are useful for all methods of use disclosed herein.
The pharmaceutically active compounds of this invention can be processed in accordance with conventional methods of pharmacy to produce medicinal agents for administration to patients, including humans and other mammals.
For oral administration, the pharmaceutical composition may be in the form of, for example, a capsule, a tablet, a suspension, or liquid. The pharmaceutical composition is preferably made in the form of a dosage unit containing a given amount of the active ingredient. For example, these may contain an amount of active ingredient from about 1 to 2000 mg, preferably from about 1 to 500 mg, more preferably from about 5 to 150 mg. A suitable daily dose for a human or other mammal may vary widely depending on the condition of the patient and other factors, but, once again, can be determined using routine methods.
The active ingredient may also be administered by injection as a composition with suitable carriers including saline, dextrose, or water. The daily parenteral dosage regimen will be from about 0.1 to about 30 mg/kg of total body weight, preferably from about 0.1 to about 10 mg/kg, and more preferably from about 0.25 mg to 1 mg/kg.
Injectable preparations, such as sterile injectable aqueous or oleaginous suspensions, may be formulated according to the known are using suitable dispersing or wetting agents and suspending agents. The sterile injectable preparation may also be a sterile injectable solution or suspension in a non-toxic parenterally acceptable diluent or solvent, for example as a solution in 1,3-butanediol. Among the acceptable vehicles and solvents that may be employed are water, Ringer's solution, and isotonic sodium chloride solution. In addition, sterile, fixed oils are conventionally employed as a solvent or suspending medium. For this purpose any bland fixed oil may be employed, including synthetic mono- or diglycerides. In addition, fatty acids such as oleic acid find use in the preparation of injectables.
Suppositories for rectal administration of the drug can be prepared by mixing the drug with a suitable non-irritating excipient such as cocoa butter and polyethylene glycols that are solid at ordinary temperatures but liquid at the rectal temperature and will therefore melt in the rectum and release the drug.
A suitable topical dose of active ingredient of a compound of the invention is 0.1 mg to 150 mg administered one to four, preferably one or two times daily. For topical administration, the active ingredient may comprise from 0.001% to 10% w/w, e.g., from 1% to 2% by weight of the formulation, although it may comprise as much as 10% w/w, but preferably not more than 5% w/w, and more preferably from 0.1% to 1% of the formulation.
Formulations suitable for topical administration include liquid or semi-liquid preparations suitable for penetration through the skin (e.g., liniments, lotions, ointments, creams, or pastes) and drops suitable for administration to the eye, ear, or nose.
For administration, the compounds of this invention are ordinarily combined with one or more adjuvants appropriate for the indicated route of administration. The compounds may be admixed with lactose, sucrose, starch powder, cellulose esters of alkanoic acids, stearic acid, talc, magnesium stearate, magnesium oxide, sodium and calcium salts of phosphoric and sulfuric acids, acacia, gelatin, sodium alginate, polyvinyl-pyrrolidine, and/or polyvinyl alcohol, and tableted or encapsulated for conventional administration. Alternatively, the compounds of this invention may be dissolved in saline, water, polyethylene glycol, propylene glycol, ethanol, corn oil, peanut oil, cottonseed oil, sesame oil, tragacanth gum, and/or various buffers. Other adjuvants and modes of administration are well known in the pharmaceutical art. The carrier or diluent may include time delay material, such as glyceryl monostearate or glyceryl distearate alone or with a wax, or other materials well known in the art.
The pharmaceutical compositions may be made up in a solid form (including granules, powders or suppositories) or in a liquid form (e.g., solutions, suspensions, or emulsions). The pharmaceutical compositions may be subjected to conventional pharmaceutical operations such as sterilization and/or may contain conventional adjuvants, such as preservatives, stabilizers, wetting agents, emulsifiers, buffers etc.
Solid dosage forms for oral administration may include capsules, tablets, pills, powders, and granules. In such solid dosage forms, the active compound may be admixed with at least one inert diluent such as sucrose, lactose, or starch. Such dosage forms may also comprise, as in normal practice, additional substances other than inert diluents, e.g., lubricating agents such as magnesium stearate. In the case of capsules, tablets, and pills, the dosage forms may also comprise buffering agents. Tablets and pills can additionally be prepared with enteric coatings.
Liquid dosage forms for oral administration may include pharmaceutically acceptable emulsions, solutions, suspensions, syrups, and elixirs containing inert diluents commonly used in the art, such as water. Such compositions may also comprise adjuvants, such as wetting, sweetening, flavoring, and perfuming agents.
Compounds of the present invention can possess one or more asymmetric carbon atoms and are thus capable of existing in the form of optical isomers as well as in the form of racemic or non-racemic mixtures thereof. The optical isomers can be obtained by resolution of the racemic mixtures according to conventional processes, e.g., by formation of diastereoisomeric salts, by treatment with an optically active acid or base. Examples of appropriate acids are tartaric, diacetyltartaric, dibenzoyltartaric, ditoluoyltartaric, and camphorsulfonic acid and then separation of the mixture of diastereoisomers by crystallization followed by liberation of the optically active bases from these salts. A different process for separation of optical isomers involves the use of a chiral chromatography column optimally chosen to maximize the separation of the enantiomers. Still another available method involves synthesis of covalent diastereoisomeric molecules by reacting compounds of the invention with an optically pure acid in an activated form or an optically pure isocyanate. The synthesized diastereoisomers can be separated by conventional means such as chromatography, distillation, crystallization or sublimation, and then hydrolyzed to deliver the enantiomerically pure compound. The optically active compounds of the invention can likewise be obtained by using active starting materials. These isomers may be in the form of a free acid, a free base, an ester or a salt.
Likewise, the compounds of this invention may exist as isomers, that is compounds of the same molecular formula but in which the atoms, relative to one another, are arranged differently. In particular, the alkylene substituents of the compounds of this invention, are normally and preferably arranged and inserted into the molecules as indicated in the definitions for each of these groups, being read from left to right. However, in certain cases, one skilled in the art will appreciate that it is possible to prepare compounds of this invention in which these substituents are reversed in orientation relative to the other atoms in the molecule. That is, the substituent to be inserted may be the same as that noted above except that it is inserted into the molecule in the reverse orientation. One skilled in the art will appreciate that these isomeric forms of the compounds of this invention are to be construed as encompassed within the scope of the present invention.
The compounds of the present invention can be used in the form of salts derived from inorganic or organic acids. The salts include, but are not limited to, the following: acetate, adipate, alginate, citrate, aspartate, benzoate, benzenesulfonate, bisulfate, butyrate, camphorate, camphorsulfonate, digluconate, cyclopentanepropionate, dodecylsulfate, ethanesulfonate, glucoheptanoate, glycerophosphate, hemisulfate, heptanoate, hexanoate, fumarate, hydrochloride, hydrobromide, hydroiodide, 2-hydroxyethanesulfonate, lactate, maleate, methansulfonate, nicotinate, 2-naphthalenesulfonate, oxalate, palmoate, pectinate, persulfate, 2-phenylpropionate, picrate, pivalate, propionate, succinate, tartrate, thiocyanate, tosylate, mesylate, and undecanoate. Also, the basic nitrogen-containing groups can be quaternized with such agents as lower alkyl halides, such as methyl, ethyl, propyl, and butyl chloride, bromides and iodides; dialkyl sulfates like dimethyl, diethyl, dibutyl, and diamyl sulfates, long chain halides such as decyl, lauryl, myristyl and stearyl chlorides, bromides and iodides, aralkyl halides like benzyl and phenethyl bromides, and others. Water or oil-soluble or dispersible products are thereby obtained.
Examples of acids that may be employed to from pharmaceutically acceptable acid addition salts include such inorganic acids as hydrochloric acid, sulfuric acid and phosphoric acid and such organic acids as oxalic acid, maleic acid, succinic acid and citric acid. Other examples include salts with alkali metals or alkaline earth metals, such as sodium, potassium, calcium or magnesium or with organic bases.
Also encompassed in the scope of the present invention are pharmaceutically acceptable esters of a carboxylic acid or hydroxyl containing group, including a metabolically labile ester or a prodrug form of a compound of this invention. A metabolically labile ester is one which may produce, for example, an increase in blood levels and prolong the efficacy of the corresponding non-esterified form of the compound. A prodrug form is one which is not in an active form of the molecule as administered but which becomes therapeutically active after some in vivo activity or biotransformation, such as metabolism, for example, enzymatic or hydrolytic cleavage. For a general discussion of prodrugs involving esters see Svensson and Tunek Drug Metabolism Reviews 165 (1988) and Bundgaard Design of Prodrugs, Elsevier (1985). Examples of a masked carboxylate anion include a variety of esters, such as alkyl (for example, methyl, ethyl), cycloalkyl (for example, cyclohexyl), aralkyl (for example, benzyl, p-methoxybenzyl), and alkylcarbonyloxyalkyl (for example, pivaloyloxymethyl). Amines have been masked as arylcarbonyloxymethyl substituted derivatives which are cleaved by esterases in vivo releasing the free drug and formaldehyde (Bungaard J. Med. Chem. 2503 (1989)). Also, drugs containing an acidic NH group, such as imidazole, imide, indole and the like, have been masked with N-acyloxymethyl groups (Bundgaard Design of Prodrugs, Elsevier (1985)). Hydroxy groups have been masked as esters and ethers. EP 039,051 (Sloan and Little, Apr. 11, 1981) discloses Mannich-base hydroxamic acid prodrugs, their preparation and use. Esters of a compound of this invention, may include, for example, the methyl, ethyl, propyl, and butyl esters, as well as other suitable esters formed between an acidic moiety and a hydroxyl containing moiety. Metabolically labile esters, may include, for example, methoxymethyl, ethoxymethyl, iso-propoxymethyl, α-methoxyethyl, groups such as α-((C1-C4)alkyloxy)ethyl, for example, methoxyethyl, ethoxyethyl, propoxyethyl, iso-propoxyethyl, etc.; 2-oxo-1,3-dioxolen-4-ylmethyl groups, such as 5-methyl-2-oxo-1,3,dioxolen-4-ylmethyl, etc.; C1-C3 alkylthiomethyl groups, for example, methylthiomethyl, ethylthiomethyl, isopropylthiomethyl, etc.; acyloxymethyl groups, for example, pivaloyloxymethyl, α-acetoxymethyl, etc.; ethoxycarbonyl-1-methyl; or α-acyloxy-α-substituted methyl groups, for example α-acetoxyethyl.
Further, the compounds of the invention may exist as crystalline solids which can be crystallized from common solvents such as ethanol, N,N-dimethyl-formamide, water, or the like. Thus, crystalline forms of the compounds of the invention may exist as polymorphs, solvates and/or hydrates of the parent compounds or their pharmaceutically acceptable salts. All of such forms likewise are to be construed as falling within the scope of the invention.
While the compounds of the invention can be administered as the sole active pharmaceutical agent, they can also be used in combination with one or more compounds of the invention or other agents. When administered as a combination, the therapeutic agents can be formulated as separate compositions that are given at the same time or different times, or the therapeutic agents can be given as a single composition.
The foregoing is merely illustrative of the invention and is not intended to limit the invention to the disclosed compounds. Variations and changes which are obvious to one skilled in the art are intended to be within the scope and nature of the invention which are defined in the appended claims.
From the foregoing description, one skilled in the art can easily ascertain the essential characteristics of this invention, and without departing from the spirit and scope thereof, can make various changes and modifications of the invention to adapt it to various usages and conditions.
This application is a continuation of application Ser. No. 10/688,246, filed on Oct. 16, 2003 now U.S. Pat. No. 7,582,761, which claims the benefit of U.S. Provisional Application No. 60/419,791, filed Oct. 17, 2002, which are hereby incorporated by reference.
Number | Name | Date | Kind |
---|---|---|---|
4093726 | Winn et al. | Jun 1978 | A |
Number | Date | Country |
---|---|---|
2 319 824 | May 1999 | CA |
WO 03004023 | Jan 2003 | WO |
WO 03006438 | Jan 2003 | WO |
WO 03066595 | Aug 2003 | WO |
Number | Date | Country | |
---|---|---|---|
20090143575 A1 | Jun 2009 | US |
Number | Date | Country | |
---|---|---|---|
60419791 | Oct 2002 | US |
Number | Date | Country | |
---|---|---|---|
Parent | 10688246 | Oct 2003 | US |
Child | 12367352 | US |