Patent Application
20090041836
A large number of tumor-associated carbohydrate antigens (TACA) are expressed on human cancer cells in the form of glycolipids and glycoproteins. A common feature of oncogenic transformed cells is the over-expression of oligosaccharides, such as Globo-H, LewisY, and Tn antigens. Numerous studies have shown that this abnormal glycosylation can promote metastasis and hence it is strongly correlated with poor survival rates of cancer patients.
The differential expression that is characteristic of these tumor-associated carbohydrate antigens renders them attractive targets for immunotherapy and the development of cancer vaccines. Recently, several elegant studies have attempted to capitalize on the differential expression of tumor-associated carbohydrates for the development of cancer vaccines (e.g., Raghupathi, Cancer Immunol. 1996, 43, 152-157; Musselli et al., J. Cancer Res. Clin. Oncol. 2001, 127, R20-R26; Sabbatini et al., Int. J. Cancer, 2000, 87, 79-85; Lo-Man et al., Cancer Res. 2004, 64, 4987-4994; Kagan et al., Immunol. Immunother. 2005, 54, 424-430).
Carbohydrate antigens are also abundant on the surface the human immunodeficiency virus (HIV), the causative agent of acquired immune deficiency syndrome (AIDS). Hepatitis C virus (HCV) is also known to contain carbohydrate antigens.
For most immunogens, including carbohydrates, antibody production depends on the cooperative interaction of two types of lymphocytes, B-cells and helper T-cells. Carbohydrates alone, however, cannot activate helper T-cells and therefore are characterized by poor immunogenicity. The formation of low affinity IgM antibodies and the absence of IgG antibodies manifest this limited immunogenicity. It has proven difficult to overcome the immunotolerance that characterizes these antigens.
In an effort to activate helper T cells, researchers have conjugated carbohydrate antigens to a foreign carrier protein, e.g. keyhole limpet hemocyanin (KLH) or detoxified tetanus toxoid (TT). The carrier protein enhances the presentation of the carbohydrate to the immune system and supplies T-epitopes (typically peptide fragments of 12-15 amino acids) that can activate T-helper cells.
However, conjugation of carbohydrates to a carrier protein poses several new problems. The conjugation chemistry is difficult to control, resulting in conjugates with ambiguities in composition and structure that may affect the reproducibility of an immune response. In addition, the foreign carrier protein may elicit a strong B-cell response, which in turn may lead to the suppression of an antibody response against the carbohydrate epitope. The latter is particularly a problem when self-antigens are employed such as tumor-associated carbohydrates. Also, linkers employed for conjugating carbohydrates to proteins can themselves be immunogenic, leading to epitope suppression. See also McGeary et al., for a review of lipid and carbohydrate based adjuvant/carriers in vaccines (J. Peptide Sci. 9 (7): 405-418, 2003).
Not surprisingly, several clinical trials with carbohydrate-protein conjugate cancer vaccines failed to induce sufficiently strong helper T-cell responses in all patients. Therefore, alternative strategies need to be developed for the presentation of tumor associated carbohydrate epitopes that will result in a more efficient class switch to IgG antibodies. These strategies may prove useful as well for the development of vaccines based on other carbohydrate epitopes, particularly those from pathogenic viruses such as HIV and HCV.
The present invention provides a glycolipopeptide, also referred to herein as a lipidated glycopeptide, for use in immunotherapy, as well as pharmaceutical compositions containing such glycolipopeptide and methods of making and using such glycolipopeptide. In a preferred embodiment, the glycolipopeptide of the invention is fully synthetic.
The glycolipopeptide preferably contains at least 2 epitopes: a B-epitope and a T-epitope, as well as a lipid component. The glycolipopeptide is thus able to elicit both a humoral response to the B-epitope and a cellular immune response to T-epitope. In a preferred embodiment, the glycolipopeptide of the invention advantageously combines features from a B-epitope glycan or glycopeptide and a T-epitope peptide derived from glycoproteins of mammalian (preferably human or murine) or microbial origin.
Lipidation confers several additional advantages to the glycolipopeptide. It helps the glycolipopeptides self assemble into vesicles, and may also facilitate the incorporation of the immunogen into a liposome which in turn can improve the presentation of the immunogen to the immune system. Additionally, the lipid component serves as a built-in adjuvant. Cellular uptake of the glycopeptide is also facilitated by the lipidation. Cytokine production is also enhanced by inclusion of the lipid component.
Accordingly, in one aspect, the invention provides a glycolipopeptide containing at least one carbohydrate component that includes all or part of a B-epitope; at least one peptide component that includes all or part of a T-epitope; and at least one lipid component. The carbohydrate component and the peptide component may be heterologous with respect to each other or they may be homologous with respect to each other. The glycolipopeptide of the invention may include a glycopeptide that includes all or part of both the B-epitope and the T-epitope.
The carbohydrate component of the glycolipopeptide can include a glycoconjugate, for example, a glycosylated protein, a glycosylated peptide (also referred to herein as a glycopeptide) a glycosylated lipid, a glycosylated amino acid, a DNA or an RNA. The B-epitope of the carbohydrate component may be from a microorganism, such as a virus, a bacterium, a fungus, and a protozoan. Exemplary viruses as sources for the B-epitope include human immunodeficiency virus and hepatitis C virus, without limitation. The B-epitope can therefore constitute all or part of a viral antigen, such as a viral antigen from human immunodeficiency virus or hepatitis C virus. Alternatively or additionally, the B-epitope can constitute all or part of a self-antigen. For example, the B-epitope can be one that is overexpressed on a cancer cell. An exemplary self-antigen is MUC-1 glycopeptide. Another example of a glycopeptide that can constitute the carbohydrate component of the glycolipopeptide of the invention is a β-N-acetylglucosamine (β-O-GlcNAc) modified peptide. In another embodiment, the carbohydrate component of the glycolipopeptide includes a heparin fragment, preferably a heparin sulfate fragment.
The peptide component of the glycolipopeptide, which includes a T-epitope, preferably includes a helper T-epitope.
The lipid component of the glycolipopeptide is preferably an antigenic, immunogenic, or otherwise immunostimulatory lipid. For example, the lipid component can include a Toll-like receptor (TLR) ligand, such as a PamCys-type lipid. Examples of a PamCys-type lipid include Pam2Cys, Pam3Cys, Pam2CysSKn and Pam3CysSKn, wherein n=0, 1, 2, 3, 4 or 5. A particularly preferred lipid component includes Pam3CysSK4. In another preferred embodiment, the lipid component binds to a Toll-like receptor and facilitates internalization of the glycolipopeptide by a target cell. Exemplary lipid components can be found, for example, in Scheme 8 hereinbelow. The lipid may serve as an internal (covalently linked) adjuvant. Preferably, the lipid component includes a TLR agonist, i.e., a TLR ligand that has a stimulatory effect on a Toll-like receptor.
Optionally, the glycolipopeptide of the invention includes at least one linker component. The linker component may link one or more of the carbohydrate component, peptide component and/or lipid component to each other or to a different component or structure.
A particularly preferred embodiment of the glycolipopeptide is one that contains at least one carbohydrate component that includes a self-antigen having a B-epitope, for example a MUC-1 glycopeptide; at least one peptide component comprising a T-epitope, preferably a helper T-epitope; and at least one lipid component, for example a Toll-like receptor ligand (TLR ligand). In another particularly preferred embodiment, the glycolipopeptide of the invention includes at least one carbohydrate component that has a B-epitope; at least one peptide component that has a helper T-epitope; and at least one lipid component that binds to a Toll-like receptor and facilitates uptake of the glycolipopeptide by a target cell that includes the Toll-like receptor; wherein the carbohydrate component and the peptide component are heterologous with respect to each other. In another particularly preferred embodiment, the glycolipopeptide includes at least one carbohydrate component that includes a self-antigen that has a B-epitope; at least one peptide component that has a helper T-epitope; and at least one lipid component that binds to a Toll-like receptor, i.e., a TLR ligand. Advantageously, the TLR ligand may facilitate uptake of the glycolipopeptide by a target cell that includes the Toll-like receptor.
In another aspect, the invention provides a pharmaceutical composition. In one embodiment, the pharmaceutical composition includes a glycolipopeptide of the invention, without limitation. Optionally, the pharmaceutical composition contains plurality of glycopeptides, which may include glycolipopeptides having different or the same B-epitopes, having different or the same T-epitopes and/or having different or the same lipid components. In another embodiment, the pharmaceutical composition includes an antibody against a glycolipopeptide of the invention, without limitation. The antibody can be a monoclonal or polyclonal antibody, and may be a humanized antibody. Techniques for humanizing antibodies are well known in the art.
Optionally, the pharmaceutical composition contains a liposome. Formulations with liposomes, micelles, or other lipid vesicles may facilitate delivery of the glycopeptide to a subject in need thereof. The glycolipopeptide may be covalently or noncovalently incorporated into the liposome, micelle or other lipid vesicle.
The pharmaceutical composition preferably includes a pharmaceutically acceptable carrier. In one embodiment, the pharmaceutical composition does not contain an external adjuvant. In another embodiment, the pharmaceutical composition contains an external adjuvant. An example of an external adjuvant is QS-21.
Advantageously, the pharmaceutical composition of the invention can be used as a vaccine, for example to treat or prevent an infection, disease or disorder. Additionally, the glycolipopeptide of the invention can be used for the manufacture of a medicament to treat or prevent an infection, disease or disorder.
Accordingly, in another aspect, the invention provides method for treating or preventing an infection, disease or disorder in a subject that involves administering a pharmaceutical composition of the invention to a subject in need thereof. Inclusion of QS-21 as an external adjuvant may skew the immune response of the subject toward a Th1 response, compared to a comparable pharmaceutical composition that does not include QS-21. The infection, disease or disorder that is treated or prevented may be one that is caused by a microorganism, such as a virus, a bacterium, a fungus, and a protozoan. Viral infections that can be treated or prevented include, without limitation, those caused a human immunodeficiency virus or a hepatitis C virus. Alternatively, the infection, disease or disorder that is treated or prevented can include cancer, a precancerous condition, or an autoimmune disease, such as diabetes type II.
In another aspect, the invention includes a method for making the glycolipopeptide of the invention. The carbohydrate component, the peptide component and the lipid component are synthetically linked, for example by using chemical or in vitro enzymatic methods.
In another aspect, the invention provides polyclonal or monoclonal antibody against the glycolipopeptide of the invention, as well as hybridoma cells and cell lines that produce said antibody. Preferred antibodies and hybridoma cell lines include hybridoma 1F5.D6, hybridoma 9D1.E4, hybridoma 5H11.H6, and hybridoma 18B 10.C7, as well as the antibodies produced thereby. Humanized antibodies are encompasses by the invention.
In yet another aspect, the invention provides a method for identifying a Toll-like receptor (TLR) ligand. A Toll-like receptor ligand is useful for inclusion in a glycolipopeptide vaccine of the invention. The method includes contacting a candidate compound with a target cell containing a TLR, and determining whether the candidate compound binds to the TLR. Optionally, the method also includes determining whether the candidate compound is internalized by the target cell. In a preferred embodiment, the candidate compound includes a lipid, and the TLR ligands thus identified are useful as the lipid component for the glycolipopeptide of the invention. Accordingly, another embodiment of the glycolipopeptide of the invention includes at least one carbohydrate component having a B-epitope; at least one peptide component having a helper T-epitope; and at least one lipid component identified using the method of identifying a TLR ligand as described herein.
In another aspect, the invention provides a diagnostic kit that includes a monoclonal antibody that binds to a glycolipopeptide of the invention, without limitation, along with packaging and instructions for use. The kit optionally also includes a second antibody that binds to the primary monoclonal antibody. Either or both of the primary or secondary antibodies is optionally conjugated to a detectable label.
Also provided by the invention is a diagnostic method for detecting or diagnosing an infection, disease or disorder in a subject. A biological sample, such as a body fluid or tissue, is contacted with an antibody that binds to a glycolipopeptide of the invention, and binding of the antibody to a component in the biological sample is detected. The antibody selected for use in the method is preferably one that is known to bind to a biomolecule that is associated with infection, disease or disorder. Binding of the antibody to a sample component is indicative of the presence of the infection, disease or disorder in the subject. The diagnostic method optionally further comprises quantitating the level of antibody binding to the sample component; quantitating the level of antibody binding to components in a comparable non-diseased control sample; and comparing the binding levels; wherein a change in antibody binding in the biological sample compared to the non-diseased control sample is indicative of the presence of the infection, disease or disorder in the subject.
Unless otherwise specified, “a,” “an,” “the,” and “at least one” are used interchangeably and mean one or more than one.
The glycolipopeptide of the invention includes at least one B-epitope, at least one T-epitope, and a lipid component. In a preferred embodiment, the glycolipopeptide consists essentially of three main components: at least one carbohydrate component that contains a B-epitope; at least one peptide component that contains a helper T-epitope; and at least one lipid component. Exemplary carbohydrate, peptide and lipid components are described herein and also, for example, in references cited herein, including Koganty et al., US Patent Publication 20060069238, published Mar. 30, 2006; see also Koganty et al., Drug Disc. Today, 1 (5): 190-198, 1996. The three components are covalently linked, either directly or indirectly, to form a single glycolipopeptide molecule. Indirect linkage involves the use of an optional linker component “L” to link two or more of the main components together. The three main components can be linked together (directly or indirectly) in any order. For example, the lipid and carbohydrate component can each be covalently linked to the peptide component to form the glycolipopeptide. Alternatively, the lipid component and the peptide component can each be covalently linked to the carbohydrate component. Likewise, the carbohydrate component and the peptide component can each be covalently linked to the lipid component. Or, all three components can be linked such that each of the three components is covalently linked to each of the other two components. Intermolecular crosslinking is also possible, as described in more detail below.
In a preferred embodiment, the glycolipopeptide of the invention contains one carbohydrate component, one peptide component, and one lipid component. In another embodiment, the glycolipopeptide contains a plurality of carbohydrate components, which may be the same, or may be different. Likewise, in another embodiment, the glycolipopeptide contains a plurality of peptide components, which may be the same, or may be different. Further, in another embodiment, the glycolipopeptide contains a plurality of lipid components, which may be the same, or may be different. Thus, various embodiments of the glycolipopeptide of the invention may contain one or more carbohydrate components, one or more peptide components, and/or one or more lipid components. For example, the concept of “multiple antigenic glycopeptides” (Bay et al., U.S. Pat. No. 6,676,946, Jan. 13, 2004, Bay et al.; WO 98/43677, published Oct. 8, 1998, Bay et al.) can be adapted for use in the present invention. High antigen density can be achieved using a core, for example a poly-lysine core, to which extended peptidic “arms” (the peptide component of the glycolipopeptide of the invention) are attached, which peptidic arms display the carbohydrate antigen components of the glycolipopeptide in clustered presentation. The lipid component of the glycolipopeptide can likewise extend from the lysine core, particularly in embodiments wherein the peptide component is attached to the lysine core via a nonterminal amino acid. High antigen density can also be achieved by using a liposome as a delivery vehicle, as exemplified in Examples II and III. Additionally or alternatively, the glycolipopeptides can be optionally cross-linked to form a multi-molecular complex, thereby increasing the antigen density.
The various carbohydrate, peptide and lipid components of the glycolipopeptide can be structurally derived from or based on, and/or can mimic, those found in naturally occurring biological molecules. The glycolipopeptide components preferably contain molecular structures or parts of structures (including epitopes) that are identical to or similar to those found in a living organism. Typically, while the components of the glycolipopeptide are derived from, are structurally based on, and/or mimic naturally occurring structures, they are prepared synthetically, using chemical or in vitro enzymatic methods, for example. In some embodiments, epitopes that are formed in the naturally occurring antigen from molecular elements that are close in space but distant from each other in terms of chemical bonding can be formed in the glycolipopeptide of the invention by a different chemical structure (with different bonding order or pattern) that forms the same or a similar epitope.
The three component glycolipopeptide of the invention can be viewed as cassette, wherein the carbohydrate component, the peptide component, and the lipid component are each independently selected for inclusion in the glycolipopeptide. Any combination (i.e., mixing and matching) of carbohydrate component, peptide component and lipid component as described herein to form a glycolipopeptide is encompassed by the invention.
The carbohydrate component of the glycolipopeptide can be any component that contains a carbohydrate. Examples of suitable carbohydrate components include oligosaccharides, polysaccharides and monosaccharides, and glycosylated biomolecules (glycoconjugates) such as glycoproteins, glycopeptides, glycolipids, glycosylated amino acids, DNA, or RNA. Glycosylated peptides (glycopeptides) and glycosylated amino acids, which contain one or more carbohydrate moieties as well as a peptide or amino acid, are particularly preferred as the carbohydrate component of the glycolipopeptide of the invention. An example of a glycopeptide is CD52, which is expressed on virtually all human lymphocytes and believed to play an important role in the human immune system. An example of a glycosylated amino acid is the Tn antigen. It should be understood that when the carbohydrate component is a glycopeptide, the peptide part of the glycopeptide optionally includes a T-epitope as well as a B-epitope and thus may serve as a peptide component of the glycolipopeptide. A glycopeptide that contains both a T-epitope and a B-epitope is sometimes referred to as possessing a “B-T” epitope or a “T-B” epitope. The B-epitope and the T-epitope present on the glycolipopeptide of the invention may or may not overlap.
The carbohydrate component of the glycolipopeptide of the invention includes a carbohydrate that contains one or more saccharide monomers. For example, the carbohydrate can include a monosaccharide, a disaccharide or a trisaccharide; it can include an oligosaccharide or a polysaccharide. An oligosaccharide is a oligomeric saccharide that contains two or more saccharides and is characterized by a well-defined structure. A well-defined structure is characterized by the particular identity, order, linkage positions (including branch points), and linkage stereochemistry (α, β) of the monomers, and as a result has a defined molecular weight and composition. An oligosaccharide typically contains about 2 to about 20 or more saccharide monomers. A polysaccharide, on the other hand, is a polymeric saccharide that does not have a well defined structure; the identity, order, linkage positions (including brand points) and/or linkage stereochemistry can vary from molecule to molecule. Polysaccharides typically contain a larger number of monomeric components than oligosaccharides and thus have higher molecular weights. The term “glycan” as used herein is inclusive of both oligosaccharides and polysaccharides, and includes both branched and unbranched polymers. When the carbohydrate component contains a carbohydrate that has three or more saccharide monomers, the carbohydrate can be a linear chain or it can be a branched chain. In a preferred embodiment, the carbohydrate component contains less than about 15 saccharide monomers; more preferably in contains less than about 10 saccharide monomers.
The carbohydrate component of the glycolipopeptide includes a carbohydrate that contains a B-epitope. It should be understood that the carbohydrate may be coextensive with the B-epitope, or the carbohydrate may be inclusive of the B-epitope, or the carbohydrate may include only part of the B-epitope (i.e., the B-epitope may additionally encompass other parts of the glycolipopeptide such as the peptide component, the lipid component, and/or the linker component). An example of a glycopeptide that includes a B-epitope is the glycosylated peptide MUC-1. Thus, a carbohydrate or carbohydrate component that “comprises” a B-epitope is to be understood to mean a carbohydrate or carbohydrate component that encompasses all or part of a B-epitope that is present on the glycolipopeptide.
The B-epitope can be a naturally occurring epitope or a non-naturally occurring epitope. Preferably, two or more saccharide monomers of the carbohydrate interact to form a conformational epitope that serves as the B-epitope. A B-epitope is an epitope recognized by a B cell. Any antigenic carbohydrate that contains a B-epitope can be used as the carbohydrate component, without limitation.
Non-naturally occurring carbohydrates that can be used as components of the glycolipopeptide of the invention include glycomimetics, which are molecules that mimic the shape and features of a sugar such as a monosaccharide, disaccharide or oligosaccharide (see, e.g., Barchi, Current Pharmaceutical Design, 6(4):485-501 (March 2000); Martinez-Grau et al., Chemical Society Reviews, 27(2):155-162 (1998); Schweizer, Angewandte Chemie-International Edition, 41(2):230-253 (2002)). Glycomimetics can be engineered to supply the desired B-epitope and potentially provide greater metabolic stability.
In another embodiment, the carbohydrate component contains all or part of a self-antigen. Self-antigens are antigens that are normally present in an animal's body. They can be regarded as “self-molecules,” e.g., the molecules present in or on the animal's cells, or proteins like insulin that circulate in the animal's blood. An example of a self-antigen is a carbohydrate-containing component derived from a cancer cell of the animal, such as a tumor-associated carbohydrate antigen (TACA). Typically, such self-antigens exhibit low immunogenicity. Examples include tumor-related carbohydrate B-epitope such as Ley antigen (a cancer related tetrasaccharide; e.g., Fucα((1,2)-Galβ(1,4)-[Fucα(1,3)]-GlcNAc); Globo-H antigen (e.g., L-Fucα(1,2)-Galβ(1,3)-GalNAcβ(1,3)-Galα-1,4)-Galβ(1,4)-Glu); T antigen (e.g., Galβ(1,3)-GalNAcα-O-Ser/Thr); STn antigen (sialyl Tn, e.g., NeuAcα(2,6)-GalNAcα-O-Ser/Thr); and Tn antigen (e.g., α-GalNAc-O-Ser/Thr). Another example of a self-antigen is a glycopeptide derived from the tandem repeat of the breast tumor-associated MUC-1 of human polymorphic epithelial mucin (PEM), an epithelial mucin (Baldus et al., Crit. Rev. Clin. Lab. Sci., 41(2):189-231 (2004)). A MUC-1 glycopeptide comprises at least one Tn and/or sialyl Tn (sialyl α-6 GalNAc, or “STn”) epitope; preferably linked to a threonine (T-Tn or T-STn).
Structures of exemplary tumor-associated carbohydrate antigens (TACA) that can be used as a component of the glycolipopeptide include, without limitation, the structures shown in Schemes 1 and 2.
It should be noted that the Tn, STn, and TF structures shown in Scheme 1 (monomeric, trimeric, clustered) are all shown with a threonine residue. The corresponding serine analogues are also suitable structures. In the case of Tn3, STn3, TF3 and their respective clusters, all possible homo- and hetero-analogues with differences in the threonine/serine composition of the backbone are included.
Another self-antigen for use in the carbohydrate component of the glycolipopeptide is a glycopeptide that includes an amino acid or peptide covalently linked to a monosaccharide. Preferably the monosaccharide is N-acetylglucosamine (GlcNAc) or N-acetylgalactosamine (GalNAc). A preferred glycopeptide self-antigen is a β-N-acetylglucosamine (β-O-GlcNAc) modified peptide. Preferably the monosaccharide is O-linked to a serine or a threonine of the polypeptide. Also suitable for use as a self-antigen are the related thiol (S-linked) and amine (N-linked) analogues, some examples of which are described in Example VIII. The monosaccharide is preferably linked to the peptide via a beta (β) linkage but it may be an alpha (α) linkage. In a particularly preferred embodiment, the carbohydrate component of the glycolipopeptide of the invention (which may be coextensive with the peptide component when formulated as a glycopeptide) contains a TPVSS (SEQ ID NO:10) amino acid sequence modified by O-GlcNAc. Examples of a carbohydrate that contains a β-GlcNAc modified glycopeptide as a B-epitope are shown as compounds 52 (O-linked) and 53 (S-linked) in
In another embodiment, the carbohydrate component contains all or part of a carbohydrate antigen (typically a glycan) from a microorganism, preferably a pathogenic microorganism, such as a virus (e.g., a carbohydrate present on gp120; a glycoprotein derived from the HIV virus), a Gram-negative or Gram-positive bacterium (e.g., a carbohydrate derived from Haemophilus influenzae, Streptococcus pneumoniae, or Neisseria meningitides), a fungus (e.g., a 1,3-β-linked glucan) a parasitic protozoan (e.g., a GP1-anchor found in protozoan parasites such as Leishmania and Trypanosoma brucei), or a helminth. Preferably, the microorganism is a pathogenic microorganism.
An exemplary glycan from viral pathogens, Man9 from HIV-1 gp120, is shown in Scheme 3.
Exemplary HIV carbohydrate and glycopeptide antigens are described in Wang et al., Current Opinion in Drug Disc. & Develop., 9(2): 194-206 (2006), and include both naturally occurring HIV carbohydrates and glycopeptides, as well as synthetic carbohydrates and glycopeptides based on naturally occurring HIV carbohydrates and glycopeptides.
Exemplary HCV carbohydrate and glycopeptide antigens are described in Koppel et al. Cellular Microbiology 2005; 7(2):157-165 and Goffard et al. J of Virology 2005; 79(13):8400-8409, and include both naturally occurring HCV carbohydrates and glycopeptides, as well as synthetic carbohydrates and glycopeptides based on naturally occurring HCV carbohydrates and glycopeptides.
Exemplary glycans from bacterial pathogens are shown in Scheme 4.
Exemplary glycans from protozoan pathogens are shown in Scheme 5.
An exemplary glycan from a fungal pathogen is shown in Scheme 6
An exemplary glycan from helminth pathogen is shown in Scheme 7.
It will be appreciated by one of skill in the art that while numerous antigenic carbohydrate structures are known, many more exist, since only a small fraction of the antigenic or immunogenic carbohydrates have been identified thus far. Examples of the many carbohydrate antigens discovered thus far can be found in Kuberan et al., Curr. Org. Chem., 4, 653-677 (2000); Ouerfelli et al., Expert Rev. Vaccines 4(5):677-685 (2005); Hakomori et al., Chem. Biol. 4, 97-104 (1997); Hakomori, Acta Anat. 161, 79-90 (1998); Croce and Segal-Eiras, Drugs of Today 38(11):759-768 (2002); Mendonca-Previato et al., Curr Opin. Struct. Biol. 15(5):499-505 (2005); Jones, Anais da Academia Brasileira de Ciencias 77(2):293-324 (2005); Goldblatt, J. Med. Microbiol. 47(7):563-567 (1998); Diekman et al., Immunol. Rev., 171: 203-211, 1999; Nyame et al., Arch. Biochem. Biophys., 426 (2): 182-200, 2004; Pier, Expert Rev. Vaccines, 4 (5): 645-656, 2005; Vliegenthart, FEBS Lett., 580 (12): 2945-2950, Sp. Iss., 2006; Ada et al., Clin. Microbiol. Inf., 9 (2): 79-85, 2003; Fox et al., J. Microbiol. Meth., 54 (2): 143-152, 2003; Barber et al., J. Reprod. Immunol., 46 (2): 103-124, 2000; and Sorensen, Persp. Drug Disc. Design, 5: 154-160, 1996. Any antigenic carbohydrate derived from a mammal or from an infectious organism can be used as the carbohydrate component of the glycolipopeptide of the invention, without limitation.
The peptide component of the glycolipopeptide includes a T-epitope, preferably a helper T epitope. The peptide component can be any peptide-containing structure, and can contain naturally occurring and/or non-naturally occurring amino acids and/or amino acid analogs (e.g., D-amino acids). The peptide component may be from a microorganism, such as a virus, a bacterium, a fungus, and a protozoan. The T-epitope can therefore constitute all or part of a viral antigen. Alternatively or additionally, the T-epitope can be from a mammal, and optionally constitutes all or part of a self-antigen. For example, the T-epitope can be part of a glycopeptide that is overexpressed on a cancer cell. When the peptide component of the glycolipopeptide of the invention is a glycopeptide, the peptide component may also include all or part of the B-epitope, as described elsewhere herein. More generally, it should be understood that the peptide component of the glycolipopeptide may be coextensive with the T-epitope, or the peptide component may be inclusive of the T-epitope, or the peptide component may include only part of the T-epitope (i.e., the T-epitope may additionally encompass other parts of the glycolipopeptide such as the carbohydrate component, the lipid component, and/or the linker component). Thus, a peptide or peptide component that “comprises” a T-epitope is to be understood to mean a peptide or peptide component that encompasses all or part of a T-epitope that is present on the glycolipopeptide.
Preferably peptide component contains fewer than about 20 amino acids and/or amino acid analogs. Examples of peptide components include the universal helper T peptide, QYIKANSKFIGITEL (“QYI”) (SEQ ID NO: 1), the universal helper T peptide YAFKYARHANVGRNAFELFL (“YAF”) (SEQ ID NO:2), the murine helper T peptide KLFAVWKITYKDT (“KLF”) (SEQ ID NO:3) derived from polio virus, and pan-DR binding (PADRE) peptides (PCT WO 95/07707; Alexander et al., Immunity 1:751-761 (1994); Alexander et al., J. Immunol. 2000 Feb. 1; 164(3):1625-33; U.S. Pat. No. 6,413,935 (Sette et al., Jul. 2, 2002)).
Preferred immunogenic peptide components for use in the glycolipopeptide of the invention include universal (degenerate or “promiscuous”) helper T-cell peptides, which are peptides that are immunogenic in individuals of many major histocompatibility complex (MHC) haplotypes. Numerous universal helper T-cell peptide structures are known; however, it should be understood that additional universal T-epitopes, including some with similar or even higher potency, will be identified in the future, and such peptides are well-suited for use as the peptide component the glycolipopeptide of the invention.
Exemplary T-cell peptides for use in the glycolipopeptide include, without limitation:
Synthetic, nonnatural PADRE peptide, DAla-Lys-Cha-Val-Ala-Ala-Trp-Thr-Leu-Lys-Ala-Ala-DAla, including all the analogues described by J Alexander et al. in Immunity, Vol. 1, 751-761, 1994;
Peptides derived from tetanus toxin, e.g.,
Peptides derived from polio virus, e.g., KLFAVWKITYKDT (SEQ ID NO:3);
Peptides derived from Neisseria meningitidis, e.g.,
Peptides derived from P. falsiparum CSP, e.g.,
The peptide component of the glycolipopeptide contains a T-epitope. A T-epitope is an epitope recognized by a T cell. The T-epitope can elicit a CD4+ response, thereby stimulating the production of helper T cells; and/or it can elicit a CD8+ response, thereby stimulating the production of cytotoxic lymphocytes. Preferably, the T-epitope is an epitope that stimulates the production of helper T cells (i.e., a helper T-cell epitope or Th-epitope), which in turn makes possible a humoral response to the B-epitope supplied by the carbohydrate component of the glycolipopeptide of the invention.
It should be understood that the glycolipopeptide of the invention can contain multiple T-epitopes, which may be the same or different. Further, T-epitopes may be present on the carbohydrate component and/or the lipid component (e.g., in embodiments that include glycopeptides and/or glycolipids as the carbohydrate and/or lipid components) in addition to, or in place of, the peptide component.
In one embodiment, the B-epitopes and the T-epitopes are homologous; that is, they are derived from the same organism. For example, in a glycolipopeptide suitable for use as a vaccine against a microbial pathogen, the T-epitope in addition to the B-epitope may be epitopes that are present in the microbial pathogen. In another embodiment, the B-epitopes and the T-epitopes are heterologous; that is, they are not derived from the same organism. For example, a glycolipopeptide suitable for use as an anti-cancer vaccine may have a B-cell epitope from a cancer cell, but a T-cell epitope from a bacterium or virus.
It was originally postulated that a glycopeptide having just two main components, i.e., a carbohydrate component and a peptide component, would be effective to elicit an immune response in an animal. The helper T-cell epitope was expected to induce a T-cell dependent immune response, resulting in the production of IgG antibodies against a tumor-related carbohydrate B-epitope such as Ley and Tn. However, in some applications, the two component vaccine was not found to be very effective. It was postulated that the B-cell and helper T-cell epitopes lack the ability to provide appropriate “danger signals” for dendritic cell (DC) maturation. To remedy this problem, a lipid component was included in the compound, resulting in the glycolipopeptide of the invention.
The lipid component can be any lipid-containing component, such as a lipopeptide, fatty acid, phospholipid, steroid, or a lipidated amino acids and glycolipids such as Lipid A derivatives. Preferably, the lipid component is non-antigenic; that is, it does not elicit antibodies directed against specific regions of the lipid component. However, the lipid component may and preferably does serve as an immunoadjuvant. The lipid component can serve as a carrier or delivery system for the multi-epitopic glycolipopeptide. It assists with incorporation of the glycolipopeptide into a vesicle or liposome to facilitate delivery of the glycolipopeptide to a target cell, and it enhances uptake by target cells, such as dendritic cells. Further, the lipid component stimulates the production of cytokines.
One class of preferred lipid components for use in the glycolipopeptide of the invention comprises molecular ligands of the various Toll-like receptors (TLRs). There are many known subclasses of Toll-like receptors (e.g., TLR1, TLR2, TRL3, TLR4, TLR5, TLR6, TLR7, TLR8, TLR9, TLR10, TLR11, TLR12, TLR13, TLR14, TLR15 and TLR16). See Roach et al., PNAS 2005, 102:9577-9582, for a review of the relationships between and evolution of Toll-like receptors; and Duin et al., TRENDS Immunol., 2006, 27:49-55, for a discussion of TLR signaling in vaccination. Particularly preferred are lipid components that interact with TLR2 and TLR4. TLR2 is involved in the recognition of a wide array of microbial molecules from Gram-positive and Gram-negative bacteria, as well as mycoplasma and yeast. TLR2 ligands include lipoglycans, lipopolysaccharides, lipoteichoic acids and peptidoglycans. TLR4 recognizes Gram-negative lipopolysaccharide (LPS) and lipid A, its toxic moiety. TLR ligands are widely available commercially, for example from Apotech and InvivoGen. Preferably, the lipid component is a TLR ligand that facilitates uptake of the glycolipopeptide by antigen presenting cells (see Example III).
Suitable lipids for use as the lipid component of the glycolipopeptide of the invention include PamCys-type lipid structures, such as those derived from Pam3Cys (S-[(R)-2,3-dipalmitoyloxy-propyl]-N-palmitoyl-(R)-cysteine) and Pam2Cys (S-[(R)-2,3-dipalmitoyloxy-propyl]-(R)-cysteine), which lacks the N-palmitoyl group of Pam3Cys. Pam3Cys and Pam2Cys are derived from the immunologically active N-terminal sequence of the principal lipoprotein of Escherichia coli. This class of lipids also includes Pam3CysSK4 (N-palmitoyl-S-[(R)-2,3-bis(palmitoyloxy)-propyl]-(R)-cysteinyl-(S)-seryl-(S)-lysine-(S)-lysine-(S)-lysine-(S)-lysyne) and Pam2CysSK4 (S-[(R)-2,3-bis(palmitoyloxy)-propyl]-(R)-cysteinyl-(S)-seryl-(S)-lysine-(S)-lysine-(S)-lysine-(S)-lysyne), which lacks the N-palmitoyl group of Pam3CysSK4; it should be understood that the number of lysines in these structures can be 0, 1, 2, 3, 4, 5 or more (i.e., Kn where n=0, 1, 2, 3, 4, 5 or more).
Another preferred class of lipids includes Lipid A (LpA) type lipids, such as Lipid As derived from E. coli, S. typhimurium and Neisseria meningitidis. The Lipid As can be attached to the carbohydrate component (containing a B-epitope) of the glycolipopeptide and/or to the peptide component (containing a T-epitope) through a linker that is connected, for example, to the anomeric center or anomeric phosphate, the C-4′ phosphate or the C-6′ position. The phosphates can be modified, for example, to include one or more phosphate ethanolamine diesters. Exemplary Lipid A derivatives are described in, for example, Caroff et al., Microbes Infect. 4, 915-926 (2002); Raetz et al., Annu. Rev. Biochem. 71, 635-700 (2002); and Dixon et al., J. Dent. Res. 84, 584-595 (2005).
Below, in Scheme 8, are exemplary immunogenic lipids for the incorporation into the glycolipopeptide of the invention. The first structure in the first row is Pam3CysSKn; the second structure in the first row is Pam2CysSKn; and the last 4 structures are Lipid A derivatives.
Lipids that are structurally based on Pam3Cys are particularly preferred for use as the lipid component. Pam3Cys is derived from the immunologically active N-terminal sequence of the principal lipoprotein of Escherichia Coli. These lipopeptides are powerful immunoadjuvants. Recent studies have shown that Pam3Cys exerts its activity through the interaction with Toll-like receptor-2 (TLR2). Without being bound by theory, it is believed that interaction between the lipid component and a TLR results in the production of pro-inflammatory cytokines and chemokines, which, in turn, stimulates antigen-presenting cells (APCs), and thus, initiating helper T cell development and activation. Covalent attachment of the TLR ligand to the B- and T-epitopes ensures that cytokines are produced at the site where the vaccine interacts with immune cells. This leads to a high local concentration of cytokines facilitating maturation of relevant immune cells. The lipopeptide promotes selective targeting and uptake by antigen presenting cells and B-lymphocytes. Additionally, the lipopeptide facilitates the incorporation of the glycolipopeptide into liposomes. Liposomes have attracted interest as vectors in vaccine design due to their low intrinsic immunogenicity, thus, avoiding undesirable carrier-induced immune responses.
One or more linkers (“L”) are optionally used for assembly of the three components of the glycolipopeptide. In one embodiment, the linker is a bifunctional linker that has functional groups in two different places, preferably at a first and second end, in order to covalently link two of the three components together. A bifunctional linker can be either homofunctional (i.e., containing two identical functional groups) or heterofunctional (i.e., containing two different functional groups). In another embodiment, the linker is trifunctional (hetero- or homo-) and can link all three components of the glycolipopeptide together. A suitable functional group has reactivity toward or comprises any of the following: amino, alcohol, carboxylic acid, sulfhydryl, alkene, alkyne, azide, thioester, ketone, aldehyde, or hydrazine. An amino acid, e.g., cysteine, can constitute a linker.
Bifunctional linkers are exemplified in Scheme 9.
Methods of making the glycolipopeptide, as exemplified in the Examples, are also encompassed by the invention. Preferably, the method for making the glycolipopeptide utilizes chemical synthesis, resulting in a fully synthetic glycolipopeptide. In embodiments that make use of one or more linkers, the optional linker component is functionalized so as to facilitate covalent linkage of one of the main components to another of the main components. For example, the linker can be functionalized at each end with a thiol-reactive group, such as maleimide or bromoacetyl, and the components to be joined are modified to include reactive thiols. Other options for ligation chemistry include Native Chemical Ligation, the Staudinger Ligation and Huisgen ligation (also known as “Click Chemistry”). Example II illustrates how the carbohydrate component, in that case an oligosaccharide, and the peptide component can be functionalized with a thiol-containing linker. Preferably, the linker component, if used, is nonantigenic.
The glycolipopeptide of the invention is capable of generating an immune response in a mammal. The glycolipopeptide is antigenic, in that it can generate a humoral response, resulting in the activation of B cells and production of antibodies (immunoglobulins) such as IgM. Additionally, the glycolipopeptide is immunogenic, in that it can generate a cellular response; for example, it facilitates the activation of T cells, particularly helper T cells which are also instrumental in the generation of a more complex antibody response that includes the production of IgG. Ultimately, the immune response elicited in the animal includes the production of anti-carbohydrate antibodies.
In another aspect, the glycolipopeptide of the invention is used to produce a polyclonal or monoclonal antibody that recognizes either or both of the carbohydrate component and the peptide component. The invention thus encompasses both the method of making said antibodies, as well as the antibodies themselves. Preferably, the carbohydrate and/or peptide component of the glycolipopeptide used to generate the antibodies contains a self-antigen as described above. Without being bound by theory, it is believed that the glycolipopeptide of the invention is a superior antigen (compared to the non-lipidated glycopeptide) because it stimulates local production of cytokines, upregulates co-stimulatory proteins, enhances uptake by macrophages and dendritic cells and/or avoids epitope suppression. A preferred antibody is one that requires both the carbohydrate and the peptide for binding; that is, it does not bind the either carbohydrate or the peptide alone. The selectivity of an antibody for the glycopeptide can be determined using, for example, the methods set forth in Example VIII.
Preferably, the polyclonal or monoclonal antibody is an IgG isotype.
An example of a preferred polyclonal or monoclonal antibody is one that binds to a glycopeptide that contains an O-GlcNAc monosaccharide residue. In a particularly preferred embodiment, the antibody has a relatively broad selectivity for O-GlcNAc modified proteins. For example, many proteins of interest have a TPVSS (SEQ ID NO:10) sequence modified by O-GlcNAc, and a preferred monoclonal antibody recognizes this and/or similar glycosylated peptide sequences.
Another example of a preferred polyclonal or monoclonal antibody is one that binds to a heparin sulfate fragment. It is to be understood that any carbohydrate or glycopeptide of clinical significance or interest can be incorporated as the carbohydrate and/or peptide component of the glycolipopeptide of the invention and used to generate polyclonal and monoclonal antibodies according to the method of the invention. Such carbohydrates and peptides include those of medical and veterinary interest, as well as those with other commercial or research applications.
Advantageously, use of the glycolipopeptide of the invention to make monoclonal antibody of the invention is surprisingly effective in producing monoclonal IgG antibodies having high affinity for their carbohydrate or glycopeptide antigen.
For preparation of an antibody of the present invention, any technique which provides for the production of antibody molecules by continuous cell lines in culture may be used. For example, the hybridoma technique originally developed by Kohler and Milstein (256 Nature 495-497 (1975)) may be used. See also Ausubel et al., Antibodies: a Laboratory Manual, (Harlow & Lane eds., Cold Spring Harbor Lab. 1988); Current Protocols in Immunology, (Colligan et al., eds., Greene Pub. Assoc. & Wiley Interscience N.Y., 1992-1996).
The present invention also provides for a hybridoma cell line that produces a monoclonal antibody, preferably one that has a high degree of specificity and affinity toward its antigen. The present invention further includes variants and mutants of the hybridoma cell lines, such as those described in Example VIII. Such cell lines can be produced artificially using known methods and still have the characteristic properties of the starting material. For example, they may remain capable of producing the antibodies according to the invention or derivatives thereof, and secreting them into the surrounding medium. Optionally, the hybridoma cell lines may occur spontaneously. Clones and sub-clones of hybridoma cell lines are to be understood as being hybridomas that are produced from the starting clone by repeated cloning and that still have the main features of the starting clone.
Antibodies can be elicited in an animal host by immunization with the glycolipopeptide of the invention, or can be formed by in vitro immunization (sensitization) of immune cells. The antibodies can also be produced in recombinant systems in which the appropriate cell lines are transformed, transfected, infected or transduced with appropriate antibody-encoding DNA. Alternatively, the antibodies can be constructed by biochemical reconstitution of purified heavy and light chains.
Once an antibody molecule has been produced by an animal, chemically synthesized, or recombinantly expressed, it may be purified by any method known in the art for purification of an immunoglobulin molecule, for example, by chromatography (e.g., ion exchange, affinity, particularly by affinity for the specific antigen after Protein A, and sizing column chromatography), centrifugation, differential solubility, or by any other standard technique for the purification of proteins. In addition, the antibodies of the present invention or fragments thereof can be fused to heterologous polypeptide sequences known in the art to facilitate purification.
In a preferred embodiment, the monoclonal antibody recognizes and/or binds to an antigen present on the carbohydrate component or the peptide component of the glycolipopeptide of the invention. In a particularly preferred embodiment, the monoclonal antibody binds to an antigen present on a selected feature of the carbohydrate component. An example of a selected feature would include the modification on a glycopeptide such as O-GlcNAc. Other modifications include, but are not limited to, GalNAc and other saccharide modifications.
The term “antibody” is used in the broadest sense and specifically covers monoclonal antibodies (including full length monoclonal antibodies) and antibody fragments so long as they exhibit the desired biological activity. “Antibody fragments” comprise a portion of a full length antibody, generally the antigen binding or variable region thereof. Examples of antibody fragments include, but are not limited to Fab, Fab′, and Fv fragments; diabodies; linear antibodies; and single-chain antibody molecules. The term “monoclonal antibody” as used herein refers to antibodies that are highly specific, being directed against a single antigenic site. The term “antibody” as used herein also includes naturally occurring antibodies as well as non-naturally occurring antibodies, including, for example, single chain antibodies, chimeric, bifunctional and humanized antibodies, as well as antigen-binding fragments thereof. Such non-naturally occurring antibodies can be constructed using solid phase peptide synthesis, can be produced recombinantly or can be obtained, for example, by screening combinatorial libraries consisting of variable heavy chains and variable light chains as described by Huse et al. (Science 246:1275-1281 (1989)). These and other methods of making functional antibodies are well known to those skilled in the art (Winter and Harris, Immunol. Today 14:243-246 (1993); Ward et al., Nature 341:544-546 (1989); Harlow and Lane, supra, 1988); Hilyard et al., Protein Engineering: A practical approach (IRL Press 1992); Borrabeck, Antibody Engineering, 2d ed. (Oxford University Press 1995)).
In all mammalian species, antibody peptides contain constant (i.e., highly conserved) and variable regions, and, within the latter, there are the complementarity determining regions (CDRs) and the so-called “framework regions” made up of amino acid sequences within the variable region of the heavy or light chain but outside the CDRs. Preferably the monoclonal antibody of the present invention has been humanized. As used herein, the term “humanized” antibody refers to antibodies in which non-human (usually from a mouse or a rat) CDRs are transferred from heavy and light variable chains of the non-human immunoglobulin into a variable region designed to contain a number of amino acid residues found within the framework region in human IgG. Similar conversion of mouse/human chimeric antibodies to a humanized antibody has been described before. General techniques for cloning murine immunoglobulin variable domains are described, for example, by the publication of Orlandi et al., Proc. Nat'l Acad. Sci. USA 86: 3833 (1989), which is incorporated by reference in its entirety. Techniques for producing humanized MAbs are described, for example, by Jones et al., Nature 321: 522 (1986), Riechmann et al., Nature 332: 323 (1988), Verhoeyen et al., Science 239: 1534 (1988), and Singer et al., J. Immun. 150: 2844 (1993), each of which is hereby incorporated by reference.
Methods of using the monoclonal antibody that recognizes and/or binds to a component of the glycolipopeptide are also encompassed by the invention. Uses for the monoclonal antibody of the invention include, but are not limited to, diagnostic, therapeutic, and research uses. In a preferred embodiment, the monoclonal antibody can be used for diagnostic purposes. Because O-GlcNAc modifications are associated with a variety of disease states, detection of changes in the levels of O-GlcNAc modifications may be interpreted as early indicators of the onset of such diseases. For example, an increase in O-GlcNAc modifications in skeletal muscle and pancreas glycopeptides correlates with development of Type II Diabetes while a reduction in O-GlcNAc modifications in neural glycopeptides correlates with the onset of Alzheimer's disease (Dias and Hart, Mol. BioSyst. 3:766-772 (2007); Lefebvre et al., Exp. Rev. Proteomics 2(2):265-275 (2005)). Therefore, identifying an increase in the amount of O-GlcNAc in a sample of skeletal muscle tissue relative to a non-disease control sample may be indicative of development of Type II Diabetes.
It should be understood that the monoclonal and polyclonal antibodies of the invention are not limited to those that recognize any particular ligand but include, without limitation and by way of example only, antibodies against any type of tumor associated carbohydrate antigen (TACA) and against any saccharides derived from any microorganism. The antibodies of the invention are broadly useful in diagnostic or therapeutic applications.
Antibodies of the invention can be used to detect the presence or overexpression of a specific protein or a specific modification. Techniques for detection are known to the art and include but are not limited to Western blotting, dot blotting, immunoprecipitation, agglutination, ELISA assays, immunohistochemistry, and flow cytometry on a variety of tissues or bodily fluids, and a variety of sandwich assays. See, for example, U.S. Pat. No. 5,876,949, hereby incorporated by reference.
In order to detect changes in the level of O-GlcNAc modified glycopeptides, monoclonal antibodies of the invention may be labeled covalently or non-covalently with any of a number of known detectable labels, such as fluorescent, radioactive, or enzymatic substances, as is known in the art. Alternatively, a secondary antibody specific for the monoclonal antibody of the invention is labeled with a known detectable label and used to detect the O-GlcNAc-specific antibody in the above techniques.
Preferred detectable labels include chromogenic dyes. Among the most commonly used are 3-amino-9-ethylcarbazole (AEC) and 3,3′-diaminobenzidine tetrahydrochloride (DAB). These can be detected using light microscopy. Also preferred are fluorescent labels. Among the most commonly used fluorescent labeling compounds are fluorescein isothiocyanates (e.g. FITC and TRITC), Idotricarbocyanines (e.g. Cy5 and Cy7), rhodamine, phycoerythrin, phycocyanin, allophycocyanin, o-phthaldehyde and fluorescamine. Chemiluminescent and bioluminescent compounds such as luminol, isoluminol, theromatic acridinium ester, imidazole, acridinium salt, oxalate ester, luciferin, luciferase, and aequorin may also be used. When the fluorescent-labeled antibody is exposed to light of the proper wavelength, its presence can be detected due to its fluorescence. Also preferred are radioactive labels. Radioactive isotopes which are particularly useful for labeling the antibodies of the present invention include 3H, 125I, 131I, 35S, 32P, and 14C. The radioactive isotope can be detected by such means as the use of a gamma counter, a scintillation counter, or by autoradiography. Enzymes which can be used to detectably label antibodies and which can be detected, for example, by spectrophotometric, fluorometric, or visual means include, but are not limited to, malate dehydrogenase, staphylococcal nuclease, delta-5-steroid isomerase, yeast alcohol dehydrogenase, alpha-glycerophosphate dehydrogenase, triose phosphate isomerase, horseradish peroxidase, alkaline phosphatase, asparaginase, glucose oxidase, beta-galactosidase, ribonuclease, urease, catalase, glucose-6-phosphate dehydrogenase, glucoamylase, and acetylcholinesterase. Other methods of labeling and detecting antibodies are known in the art and are within the scope of this invention.
Because it is antigenic and immunogenic, the glycolipopeptide of the invention is well-suited for use in an immunotherapeutic pharmaceutical composition. The invention thus includes pharmaceutical compositions that include a glycolipopeptide of the invention as well as a pharmaceutically acceptable carrier. In a preferred embodiment, the pharmaceutical composition contains liposomes, for example phospholipid-based liposomes, and the glycolipopeptide is incorporated into liposomes as a result of noncovalent interactions such as hydrophobic interactions. Alternatively, the glycolipopeptide can be covalently linked to a component of the liposome. The liposome formulation can include glycolipopeptides that have the same or different B-epitopes; the same or different T-cell epitopes; and/or the same or different lipid components.
The glycolipopeptide of the invention is readily formulated as a pharmaceutical composition for veterinary or human use. The pharmaceutical composition optionally includes excipients or diluents that are pharmaceutically acceptable as carriers and compatible with the glycolipopeptide. The term “pharmaceutically acceptable carrier” refers to a carrier(s) that is “acceptable” in the sense of being compatible with the other ingredients of a composition and not deleterious to the recipient thereof or to the glycolipopeptide. Suitable excipients include, for example, water, saline, dextrose, glycerol, ethanol, or the like and combinations thereof. In addition, if desired, the pharmaceutical composition may contain minor amounts of auxiliary substances such as wetting or emulsifying agents, pH buffering agents, salts, and/or adjuvants which enhance the effectiveness of the immune-stimulating composition. For oral administration, the glycolipopeptide can be mixed with proteins or oils of vegetable or animal origin. Methods of making and using such pharmaceutical compositions are also included in the invention.
The pharmaceutical composition of the invention can be administered to any subject including humans and domesticated animals (e.g., cats and dogs). In a preferred embodiment, the pharmaceutical composition is useful as a vaccine and contains an amount of glycolipopeptide effective to induce an immune response in a subject. Dosage amounts, schedules for vaccination and the like for the glycolipopeptide vaccine of the invention are readily determinable by those of skill in the art. The vaccine can be administered to the subject using any convenient method, preferably parenterally (e.g., via intramuscular, intradermal, or subcutaneous injection) or via oral or nasal administration. The useful dosage to be administered will vary, depending on the type of animal to be vaccinated, its age and weight, the immunogenicity of the attenuated virus, and mode of administration.
Inclusion of an adjuvant, such as alum or QS-21, in the pharmaceutical composition is optional. However, it has been found that as long as the three main components of the glycolipopeptide are covalently linked, an adjuvant is not needed in order to effectively generate an immune response in an animal. Moreover, the inclusion of QS-21 may skew the immune response, resulting in a change in the relative amounts Th1 and Th2 T cells produced (see Example III). QS-21 can be included as an adjuvant in the pharmaceutical composition when, for example, a shift toward a Th1 response is desired, as opposed to a bias toward a Th2 response that is observed in the absence of QS-21.
As noted, the pharmaceutical composition is useful as a vaccine. The vaccine can be a prophylactic or protective vaccine, administered before or after contact with a pathogen but prior to the development of infection or disease. Likewise, the vaccine can be a therapeutic vaccine, administered after infection with a pathogen, or the development of a disease or disorder such as cancer, precancerous conditions, or autoimmune disease. Thus vaccines that include a glycolipopeptide as described herein, including antimicrobial (e.g., anti-viral or anti-bacterial) and anti-cancer vaccines, are encompassed by the present invention. Cancers that can be effectively treated or prevented include, but are not limited to, prostate cancer, bladder cancer, colon cancer and breast cancer.
The glycolipopeptide of the invention can also be used in passive immunization methods. For example, the glycolipopeptide can be administered to a host animal such as a rabbit, mouse, rat, chicken or goat to generate antibody production in the host animal. Protocols for raising polyclonal antibodies in host animals are well known. The T-epitope or T-epitopes included in the glycolipopeptide optionally are selected to be the same as or similar to the corresponding T-epitope of the host animal in which the antibody is raised. The antibodies are isolated from the animal, then administered to a mammalian subject, preferably a human subject, prophylactically or therapeutically to treat or prevent disease or infection. Monoclonal antibodies against the glycolipopeptide of the invention can be isolated from hybridomas prepared in accordance with standard laboratory protocols; they can also be produced using recombinant techniques such as phage display. Such antibodies are also useful for passive immunization. Optionally, the anti-glycolipopeptide monoclonal antibodies are human antibodies or humanized antibodies. The B-epitope or B-epitopes included in the glycolipopeptide used to create the polyclonal or monoclonal antibodies is selected with reference to the intended purpose of treatment. The invention encompasses polyclonal and monoclonal anti-glycolipopeptide antibodies, as well as methods for making and using them.
Accordingly, also provided by the invention is a pharmaceutical composition that includes the monoclonal or polyclonal antibody of the invention as well as a pharmaceutically acceptable carrier. Preferably the monoclonal antibody is a humanized antibody. Humanized antibodies are more preferable for use in therapies of human diseases or disorders because the humanized antibodies are much less likely to induce an immune response, particularly an allergic response, when introduced into a human host. As noted, the pharmaceutical composition optionally includes excipients or diluents that are pharmaceutically acceptable as carriers and are compatible with the monoclonal antibody and can be administered to any subject including humans and domesticated animals (e.g. cats and dogs). Methods of making and using such a pharmaceutical composition are also included in this invention.
As noted elsewhere herein, it has been surprisingly found that covalent attachment of a Toll-like receptor (TLR) ligand to a glycopeptide comprising a carbohydrate component (containing a B epitope) and a peptide component (containing a T-epitope) enhances uptake and internalization of the glycopeptide by a target cell (see Example III). TLR ligands thus identified that are characterized as lipids are preferred lipid components for use in the glycolipopeptide of the invention. The invention thus further provides a method for identifying TLR ligands, preferably lipid ligands, that includes contacting a candidate compound with a target cell containing a Toll-like receptor (TLR), and determining whether the candidate compound binds to the TLR (i.e., is a TLR ligand). Preferably, the candidate compound is internalized by the target cell through the TLR. Lipid-containing TLR ligands identified by binding to a TLR and, optionally, by internalization into the target cell are expected to be immunogenic and are well-suited for use as the lipid component of the glycolipopeptide of the invention. The invention therefore also encompasses glycolipopeptides which include, as the lipid component(s), one or more lipid-containing TLR ligands identified using the method of the invention.
The present invention also includes a diagnostic kit. The kit provided by the invention can contain an antibody of the invention, preferably a monoclonal antibody, and a suitable buffer (such as Tris, phosphate, carbonate, etc.), thus enabling the kit user to identify O-GlcNAc modifications. The user can then detectably label the antibodies as desired. Alternatively, the kit provided by the invention can contain the antibody in solution, preferably frozen in a quenching buffer, or in powder form (as by lyophilization). The antibody, which may be conjugated to a detectable label, or unconjugated, is included in the kit with buffers that may optionally also include stabilizers, biocides, inert proteins, e.g., serum albumin, or the like. Generally, these materials will be present in less than 5% wt. based on the amount of active antibody, and usually present in total amount of at least about 0.001% wt. based again on the antibody concentration. Optionally, the kit may include an inert extender or excipient to dilute the active ingredients, where the excipient may be present in from about 1% to 99% wt. of the total composition. In a preferred embodiment, the antibody provided by the kit is detectably labeled such that bound antibody is detectable. The detectable label can be a radioactive label, an enzymatic label, a fluorescent label, or the like. Optionally, the kit may contain an unconjugated monoclonal antibody of the invention and further contain a secondary antibody capable of binding to the primary antibody. Where a secondary antibody capable of binding to the primary antibody is employed in an assay, this will usually be present in a separate vial. The secondary antibody is typically conjugated to a detectable label and formulated in an analogous manner with the antibody formulations described above. The kit will generally also include packaging and a set of instructions for use.
The present invention is illustrated by the following examples. It is to be understood that the particular examples, materials, amounts, and procedures are to be interpreted broadly in accordance with the scope and spirit of the invention as set forth herein.
In this Example, a fully synthetic candidate cancer vaccine, composed of a tumor associated Tn-antigen, a peptide T-epitope and the lipopeptide Pam3Cys was prepared by a combination of polymer-supported and solution phase chemistry. Incorporation of the glycolipopeptide into liposomes gave a formulation that was able to elicit a T-cell dependent antibody response in mice.
A common feature of oncogenic transformed cells is the over-expression of oligosaccharides, such as Globo-H, LewisY, and Tn antigens (Lloyd, Am. J. Clin. Pathol. 1987, 87, 129; Feizi et al., Trends in Biochem. Sci. 1985, 10, 24-29; Springer, J. Mol. Med. 1997, 75, 594-602; Hakomori, Acta Anat. 1998, 161, 79-90). Numerous studies have shown that this abnormal glycosylation can promote metastasis (Sanders et al., Mol. Pathol. 1999, 52, 174-178) and hence its expression is strongly correlated with poor survival rates of cancer patients.
Several elegant studies have exploited the differential expression of tumor-associated carbohydrates for the development of cancer vaccines (Ragupathi, Cancer Immunol. 1996, 43, 152-157; Musselli et al., J Cancer Res. Clin. Oncol. 2001, 127, R20-R26). The inability of carbohydrates to activate helper T-lymphocytes has complicated, however, their use as vaccines (Kuberan et al., Current Organic Chemistry 2000, 4, 653-677). For most immunogens, including carbohydrates, antibody production depends on the cooperative interaction of two types of lymphocytes, B-cells and helper T-cells (Jennings et al., Neoglycoconjugates, preparation and application, Academic, San Diego, 1994). Saccharides alone cannot activate helper T-cells and therefore have a limited immunogenicity. The formation of low affinity IgM antibodies and the absence of IgG antibodies manifest this limited immunogenicity.
In order to overcome the T-cell independent properties of carbohydrates, past research has focused on the conjugation of saccharides to a foreign carrier protein (e.g. Keyhole Limpet Hemocyanin (KLH) detoxified tetanus toxoid). In this approach, the carrier protein enhances the presentation of the carbohydrate to the immune system and provides T-epitopes (peptide fragments of 12-15 amino acids) that can activate T-helper cells.
However, the conjugation of carbohydrates to a carrier protein poses several problems. In general, the conjugation chemistry is difficult to control, resulting in conjugates with ambiguities in composition and structure, which may affect the reproducibility of an immune response (Anderson et al., J. Immunol. 1989, 142, 2464-2468). In addition, the foreign carrier protein can elicit a strong B-cell response, which may lead to the suppression of an antibody response against the carbohydrate epitope. The latter is a greater problem when self-antigens are employed such as tumor-associated carbohydrates. Also linkers for the conjugation of carbohydrates to proteins can be immunogenic, leading to epitope suppression (Buskas et al., Chem. Eur. J. 2004, 10, 3517-3523). Not surprisingly, several clinical trials with carbohydrate-protein conjugate cancer vaccines failed to induce sufficiently strong helper T-cell responses in all patients (Sabbatini et al., Int. J. Cancer 2000, 87, 79-85). Therefore, alternative strategies need to be developed for the presentation of tumor associated carbohydrate epitopes that will result in a more efficient class switch to IgG antibodies (Keil et al., Angew. Chem. Int. Ed. 2001, 40, 366-369; Angew. Chem. 2001, 113, 379-382; Toyokuni et al., Bioorg. & Med. Chem. 1994, 2, 1119-1132; Lo-Man et al., Cancer Res. 2004, 64, 4987-4994; Kagan et al., Cancer Immunol. Immunother. 2005, 54, 424-430; Reichel et al., Chem. Commun. 1997, 21, 2087-2088).
Here we report the synthesis and immunological evaluation of a structurally well-defined fully synthetic anti-cancer vaccine candidate (compound 9) that constitutes the minimal structural features required for a focused and effective T-cell dependent immune response. The vaccine candidate is composed of the tumor-associated Tn-antigen, the peptide T-epitope YAFKYARHANVGRNAFELFL (YAF) (SEQ ID NO:2), and the lipopeptide S—[(R)-2,3-dipalmitoyloxy-propyl]-N-palmitoyl-(R)-cysteine (Pam3Cys). The Tn-antigen, which will serve as a B-epitope, is over-expressed on the surface of human epithelial tumor-cells of breast, colon, and prostate. This antigen is not present on normal cells, and thus rendering it an excellent target for immunotherapy. To overcome the T-cell independent properties of the carbohydrate antigen, the YAF peptide was incorporated. This 20 amino acid peptide sequence is derived from an outer-membrane protein of Neisseria meningitides and has been identified as a MHC class II restricted site for human T-cells (Wiertz et al., J. Exp. Med. 1992, 176, 79-88). It was envisaged that this helper T-cell epitope would induce a T-cell dependent immune response resulting in the production of IgG antibodies against the Tn-antigen. The combined B-cell and helper T-cell epitope lacks the ability to provide appropriate “danger signals” (Medzhitov et al., Science 2002, 296, 298-300) for dendritic cell (DC) maturation. Therefore, the lipopeptide Pam3Cys, which is derived from the immunologically active N-terminal sequence of the principal lipoprotein of Escherichia coli (Braun, Biochim. Biophys. Acta 1975, 415, 335-377), was incorporated. This lipopeptide has been recognized as a powerful immunoadjuvant (Weismuller et al., Physiol. Chem. 1983, 364, 593) and recent studies have shown that it exerts its activity through the interaction with Toll-like receptor-2 (TLR-2) (Aliprantis et al., Science 1999, 285, 736-73). This interaction results in the production of pro-inflammatory cytokines and chemokines, which, in turn, stimulates antigen-presenting cells (APCs), and thus, initiating helper T cell development and activation (Werling et al., Vet. Immunol. Immunopathol. 2003, 91, 1-12). The lipopeptide also facilitates the incorporation of the antigen into liposomes. Liposomes have attracted interest as vectors in vaccine design (Kersten et al., Biochim. Biophys. Acta 1995, 1241, 117-138) due to their low intrinsic immunogenicity, thus, avoiding undesirable carrier-induced immune responses.
The synthesis of target compound 9 requires a highly convergent synthetic strategy employing chemical manipulations that are compatible with the presence of a carbohydrate, peptide and lipid moiety. It was envisaged that 9 could be prepared from spacer containing Tn-antigen 7, polymer-bound peptide 1, and S-[2,3-bis(palmitoyloxy)propyl]-N-Fmoc-Cys (Pam2FmocCys, 2, (Metzger et al., Int. J. Peptide Protein Res. 1991, 38, 545-554)). The resin-bound peptide 1 was assembled by automated solid-phase peptide synthesis using Fmoc protected amino acids in combination with the hyper acid-sensitive HMPB-MBHA resin and 2-(1H-benzotriazole-1-yl)-oxy-1,1,3,3-tetramethyluronium hexafluorophosphate/1-hydroxybenzotriazole (HBTU/HOBt) (Knorr et al., Tetrahedron Lett. 1989, 30, 1927-1930) as the activation cocktail (Scheme 10). The HMPB-MBHA resin was selected because it allows the cleavage of a compound from the resin without concomitant removal of side-chain protecting groups. This feature was important because side-chain functional groups of aspartic acid, glutamic acid and lysine would otherwise interfere with the incorporation of the Tn-antigen derivative 7. Next, the Pam2FmocCys derivative 2 was manually coupled to the N-terminal amine of peptide 1 using PyBOP (Martinez et al., J. Med. Chem. 1988, 28, 1874-1879) and HOBt in the presence of DIPEA in a mixture of DMF and dichloromethane to give the resin-bound lipopeptide 3. The Fmoc group of 3 was removed under standard conditions and the free amine of the resulting compound 4 was coupled with palmitic acid in the presence of PyBOP and HOBt to give the fully protected and resin-bound lipopeptide 5. The amine of the Pam2Cys moiety was palmitoylated after coupling with 1 to avoid racemization of the cysteine moiety. Cleavage of compound 5 from the resin was achieved with 2% TFA in dichloromethane followed by the immediate neutralization with 5% pyridine in methanol. After purification by LH-20 size exclusion chromatography, the C-terminal carboxylic acid of lipopeptide 6 was coupled with the amine of Tn-derivative 7, employing DIC/HOAt/DIPEA (Carpino, J. Am. Chem. Soc 1993, 115, 4397-4398) as coupling reagents to give, after purification by Sephadex LH-20 size-exclusion chromatography, fully protected lipidated glycopeptide 8 in a yield of 79%. Mass spectrometric analysis by MALDI-TOF showed signals at m/z 5239.6 and 5263.0, corresponding to [M+H]+ and [M+Na]+, respectively. Finally, the side-chain protecting groups of 8 were removed by treatment with 95% TFA in water using 1,2-ethanedithiol (EDT) as a scavenger. It was found that the alternative use of triisopropyl silane (TIS) resulted in the formation of unidentified by-products. The target compound 9 was purified by size-exclusion chromatography followed by RP-HPLC using a Synchropak C4 column. MALDI mass analysis of 9 showed a signal at m/z 3760.3 corresponding to [M+Na]+.
Next, the compound 9 was incorporated into phospholipid-based liposomes. Thus, after hydration of a lipid-film containing 9, cholesterol, phosphatidylcholine and phosphatidylethanolamine, small uni-lamellar vesicles (SUVs) were prepared by extrusion through 100 nm Nuclepore® polycarbonate membranes. Transmission electron microscopy (TEM) by negative stain confirmed that the liposomes were uniformly sized with an expected diameter of approximately 100 nm (see FIG. 1 of Buskas et al., Angew. Chem. Int. Ed. 2005, 44, 5985-5988). The liposome preparations were analyzed for N-acetyl galactosamine content by hydrolysis with TFA followed by quantification by high pH anion exchange chromatography. Concentrations of approximately 30 μg/mL of GalNAc were determined, which corresponded to an incorporation of approximately 10% of the starting compound 9.
Groups of five female BALB/c mice were immunized subcutaneously at weekly intervals with freshly prepared liposomes containing 0.6 μg carbohydrate. To explore the adjuvant properties of the built-in lipopeptide Pam3Cys, the antigen-containing liposomes were administered with or without the potent saponin immuno-adjuvant QS-21 (Antigenics Inc., Lexington, Mass.). Anti-Tn antibody titers were determined by coating microtiter plates with a BSA-Tn conjugate and detection was accomplished with anti-mouse IgM or IgG antibodies labeled with alkaline phosphatase. As can be seen in Table 1, the mice immunized with the liposome preparations elicited IgM and IgG antibodies against the Tn-antigen (Table 1, entries 1 and 2). The presence of IgG antibodies indicated that the helper T-epitope peptide of 9 had activated helper T-lymphocytes. Furthermore, the observation that IgG antibodies were raised by mice which were only immunized with liposomes (group 1) indicated that the built-in adjuvant Pam3Cys had triggered appropriate signals for the maturation of DCs and their subsequent activation of helper T-cells. However, the mice which received the liposomes in combination with QS-21 (group 2), elicited higher titers of anti Tn-antibodies. This stronger immune response may be due to a shift from a mixed Th1/Th2 to a Th1 response (Moore et al., Vaccine 1999, 17, 2517-2527).
[a]ELISA plates were coated with a BSA-BrAc-Tn conjugate. All titers are means for a group of five mice. Titers were determined by regression analysis, plotting log10 dilution vs. absorbance. The titers were calculated to be the highest dilution that gave 0.1 or higher than the absorbance of normal saline mouse sera diluted 1:100.
The results presented herein provide, for the first time, a proof-of-principle for the use of lipidated glycopeptides as a minimal subunit vaccine. It is to be expected that several improvements can be made. For example, it has been found that a clustered presentation of the Tn-antigen is a more appropriate mimetic of mucins, and hence antibodies raised against this structure recognize better Tn-antigens expressed on cancer cells (Nakada et al., J. Biol. Chem. 1991, 266, 12402-12405; Nakada et al., Proc. Natl. Acad. Sci. USA 1993, 90, 2495-2499; Reddish et al., Glycoconj. J. 1997, 14, 549-560; Reis et al., Glycoconj. J. 1998, 15, 51-62). The Th-epitope employed in this study is known to be a MHC class II restricted epitope for humans. Thus, a more efficient class-switch to IgG antibodies may be expected when a murine Th-epitope is employed. On the other hand, compound 9 is a more appropriate vaccine candidate for use in humans. A recent report indicated that Pam2Cys is a more potent immunoadjuvant than Pam3Cys (Jackson et al., Proc. Nat. Acad. Sci. USA 2004, 101, 15440-15445). It has also been suggested that the Pam2Cys adjuvant has improved solubility properties (Zeng et al., J. Immunol. 2002, 169, 4905-4912), which is a problematic feature of compound 9. Studies addressing these issues are ongoing.
This work is reported in Buskas et al., Angew. Chem. Int. Ed. 2005, 44, 5985-5988.
Reagents and general experimental procedures. Amino acids and resins were obtained from Applied Biosystems and NovaBiochem; DMF from EM science; and NMP from Applied Biosystems. Phosphatidylethanolamine (PE), cholesterol, phosphatidylcholine (PC; egg yolk), and phosphatidylglycerol (PG; egg yolk) were from purchased from Sigma-Aldrich and Fluka. All other chemicals were purchased from Aldrich, Acros, and Fluka and used without further purification. All solvents employed were of reagent grade and dried by refluxing over appropriate drying agents. TLC was performed using Kieselgel 60 F254 (Merck) plates, with detection by UV light (254 nm) and/or by charring with 8% sulfuric acid in ethanol or by ninhydrine. Column chromatography was performed on silica gel (Merck, mesh 70-230). Size exclusion column chromatography was performed on Sephadex LH-20. Extracts were concentrated under reduced pressure at ≦40° C. (water bath). An Agilent 1100 series HPLC system equipped with an autosampler, UV-detector and fraction-collector and a Synchropak C4 column 100×4.6 mm RP with a flow rate of 1 mL/min was used for analysis and purifications. Positive ion matrix assisted laser desorption ionization time of flight (MALDI-TOF) mass spectra were recorded using an HP-MALDI instrument using gentisic acid as a matrix. 1H NMR and 13C NMR spectra were recorded on a Varian Inova300 spectrometer, a Varian Inova500 spectrometer, and a Varian Inova600 spectrometer all equipped with Sun workstations. 1H spectra recorded in CDCl3 were referenced to residue CHCl3 at 7.26 ppm or TMS, and 13C spectra to the central peak of CDCl3 at 77.0 ppm. Assignments were made using standard 1D experiments and gCOSY/DQCOSY, gHSQC and TOCSY 2D experiments.
Lipopeptide 6. Compound 1 was synthesized on HMPB-MBHA resin (maximum loading, 0.1 mmol). The synthesis of peptide 1 was carried out on an ABI 433A peptide synthesizer equipped with a UV-detector using Fmoc-protected amino acids and 2-(1H-benzotriazole-1-yl)-oxy-1,1,3,3-tetramethyluronium hexafluorophosphate (HBTU)/1-hydroxybenzotriazole (HOBt) as the coupling reagents. Single coupling steps were performed with conditional capping as needed. After completion of the synthesis of peptide 1, the remaining steps were performed manually. N-Fluorenylmethoxycarbonyl-S-(2,3-bis(palmitoyloxy)-(2R-propyl)-(R)-cysteine 2 (120 mg, 0.13 mmol) was dissolved in DMF (5 mL) and PyBOP (0.13 mmol), HOBt (0.13 mmol), and DIPEA (0.27 mmol) were added. After premixing for 2 min., DCM (1 mL) was added and the mixture was added to the resin. The coupling step was performed twice. Upon completion of the coupling, as determined by the Kaiser test, the N-Fmoc group was cleaved using 20% piperidine in DMF (5 mL). Palmitic acid (77 mg, 0.3 mmol) was coupled to the free amine as described above using PyBop (0.3 mmol), HOBt (0.3 mmol) and DIPEA (0.6 mmol) in DMF. The resin was thoroughly washed with DMF and DCM and dried under vacuum for 4 h. The fully protected lipopeptide 6 was released from the resin by treatment with 2% trifluoroacetic acid in DCM (2.5 mL) for 2 min. The mixture was filtered into 5% pyridine in methanol solution (5 mL). The procedure was repeated and fractions containing the lipopeptide were pooled and concentrated to dryness. The crude product was purified by size-exclusion chromatography (LH-20, DCM/MeOH, 1:1) to give lipo-peptide 6 (275 mg, 0.057 mmol) as a white solid: Rf=0.57 (DCM/MeOH 9:1); selected NMR data (CDCl3/CD3OD 1/1 v/v 600 MHz): 1H, δ 0.48-0.90 (m, 27H, Pam CH3, Leu CH3, Val CH3), 0.96-1.61 (m, Leu CH2, Leu CH, Lys CH2, tBu CH3, Boc CH3, Ala CH3, Arg CH2), 1.18 (br s, 72H, Pam CH2), 1.95, 1.99 (s, 4×3H, Pbf CH3C), 2.36, 2.41, 2.44 (s, 6×3H, Pbf CH3), 2.48 (s, 2×2H, Pbf CH2) 2.65-2.73 (m, 6H, S—CH2-glyceryl, His CH2, Cysβ), 3.47 (m, 2H, Glyα), 3.57 (m, 2H, Glyα), 4.06 (m, 1H, S-glyceryl-CH2bO), 4.32 (m, 1H, S-glyceryl-CH2aO), 3.65-4.39 (m, 17H, Pheα, Alaα, Hisα, Lysα, Valα, Asnα, Gluα, Tyrα, Argα), 4.45 (m, 1H, Cysα), 5.06 (m, 1H, S-glyceryl-CH), 6.72-7.39 (m, 70H, His CH, Tyr aromat, Phe aromat, Trt aromat), 7.48-8.29 (m, NH). MALDI-MS calcd for C269H373N33O42S3 [M+Na] m/z=4860.22: found 4860.31.
Protected glycolipopeptide 8. A solution of lipopeptide 6 (22 mg, 4.6 μmol), HOAt (6.3 mg, 46 μmol), and DIC (7 μL, 46 μmol) in DCM/DMF (2/1 v/v, 1.5 mL) was stirred under argon atm. at ambient temperature for 15 min. Compound 7 (S mg, 19 μmol) and DIPEA (14 μL, 92 μmol) in DMF (1.5 mL) was added to the stirred mixture of lipopeptide and the reaction was kept at room temperature for 18 h. The mixture was diluted with toluene and concentrated to dryness under reduced pressure. Purification of the residue by size-exclusion chromatography (LH-20, DCM/MeOH 1:1) gave compound 8 (19 mg, 79%) as a white solid: selected NMR data (CDCl3/CD3OD 1/1 v/v 600 MHz): 1H, δ 0.60-0.90 (m, 27H, Pam CH3, Leu CH3, Val CH3), 0.96-1.61 (m, Leu CH2, Leu CH, Lys CH2, tBu CH3, Boc CH3, Ala CH3, Arg CH2), 1.18 (br s, 72H, Pam CH2), 1.94, 1.98, 1.99, 2.00 (s, 6×3H, Pbf CH3C, HNAc CH3), 2.36, 2.41, 2.45 (s, 6×3H, Pbf CH3), 2.48 (s, 2×2H, Pbf CH2), 3.42-4.31 (m, Pheα, Ala, Lys, Val, Asp, Glu, Tyr, Arg, Gly, Leu, His, Asn CH2, Tyr CH2, Phe CH2, Arg CH2), 3.71 (H-3), 3.88 (H-4) 4.06 (S-glyceryl-CH2βO), 4.20 (t, 1H, H-2), 4.32 (m, 1H, S-glyceryl-CH2βO), 4.42 (m, 1H, Cysα), 4.82 (d, 1H, H-1, J=3.68 Hz), 5.06 (m, 1H, S-glyceryl-CH), 6.72-7.39 (m, 70H, His CH, Tyr aromat, Phe aromat, Trt aromat), 7.48-8.29 (m, NH). MALDI-MS calcd for C286H403N37O49S3 [M+Na] m/z=5262.67: found 5262.99.
Glycolipopeptide 9. Compound 8 (12 mg, 2.3 μmol) in a deprotection cocktail of TFA/H2O/ethane-1,2-dithiol (95:2.5:2.5, 3 mL) was stirred at room temperature for 1 h. The solvents were removed under reduced pressure and the crude compound was first purified by a short size-exclusion LH-20 column (DCM/MeOH 1:1) and the then by HPLC using a gradient of 0-100% acetonitrile in H2O (0.1% TFA) to give, after lyophilization, compound 9 (6.8 mg, 79%) as a white solid: selected NMR data (CDCl3/CD3OD 600 MHz): 1H, δ 0.74-0.96 (m, 27H, Pam CH3, Leu CH3, Val CH3), 1.11-2.35 (Leu CH2, Leu CH, sp CH2, Lys CH2, Glu CH2, Ala CH3, Val CH, Asp CH2), 1.29 (br S, 72H, Pam CH2), 2.43-3.87 (Alaα, Glyα, S-glyceryl-OCH2, Cysβ, H-2, H-3, H-4, H-5, H-6), 4.05-4.73 (m, Cysα, Pheα, Tyrα, Hisα, Leuα, Lysα, Aspα, Valα, Argα, Gluα, H-1), 5.12 (m, 1H, S-glyceryl-CH), 6.64-6.71 (dd+dd, 2H, His CH, NH), 6.86-7.12 (dd+dd 2H, His CH, NH) 7.16-8.23 (m, Tyr aromat, Phe aromat, NH). HR-MALDI-MS calcd for C186H297N37O41S [M+Na] m/z=3760.1911: found 3760.3384.
Tn derivative 1. Compound 10 was dissolved in DMF (10 mL) and di-isopropylcarbodiimide (DIC) (82 μL, 0.53 mmol) and HOAt (216 mg, 1.58 mmol) were added. After stirring for 15 min., 3-(N-(tert. butyloxycarbonyl)-amino)propanol (111 mg, 0.63 mmol) was added and the reaction was kept at ambient temperature for 15 h. The mixture was concentrated to dryness under reduced pressure and the residue was purified by silica gel column chromatography (0-5% MeOH in DCM) and LH-20 size-exclusion chromatography (DCM/MeOH 1:1) to give compound 11 (363 mg, 83%). Rf=0.63 (DCM/MeOH 9:1); [α]D+4.4 (c 1.0 mg/mL, CH2Cl2); NMR data (CDCl3, 500 MHz): 1H, δ 1.27 (d, 3H, CH3 Thr), 1.43 (s, 9H, tBu CH3), 1.46-1.61 (m, 2H, CH2), 1.99 (s, 3H, CH3 Ac), 2.05 (s, 6H, CH3 Ac), 2.06 (s, 3H, CH3 Ac), 2.17 (s, 3H, CH3 Ac), 3.17-3.27 (m, 3H, CH2, CH2a), 3.48-3.50 (m, 1H, CH2b), 4.07-4.28 (m, 6H, H-6, H-5, Thrα, Thrβ, CH Fmoc), 4.43-4.51 (m, 2H, CH2 Fmoc), 4.62 (dd, 1H, H-2), 4.89 (br t, 1H, NH), 5.04-5.11 (m, 2H, H-1, H-3), 5.41 (d, 1H, H-4), 5.75 (br d, 1H, NH T), 6.81 (br d, 1H, NH GalNAc), 7.17-7.79 (m, 8H, aromatic H); 13C(CDCl3, 75 MHz) δ 17.19, 20.92, 20.99, 21.09, 23.30, 28.55, 30.69, 35.87, 36.92, 47.43, 47.77, 58.57, 62.36, 67.47, 68.68, 77.46, 80.08, 99.88, 120.25, 125.34, 127.35, 128.00, 128.76, 129.13, 141.55, 143.94, 144.01, 156.51, 157.52, 169.68, 170.66, 170.94, 170.99. HR-MALDI-MS calcd for C41H54N4O14 [M+Na] m/z=849.3535: found 849.3391.
Tn derivative 7. A solution of compound 11 (194 mg, 0.24 mmol) in 20% piperidine in DMF (5 mL) was stirred at ambient temperature for 1 h. The mixture was concentrated to dryness and the residue was treated with pyridine/acetic anhydride (3:1, 5 mL) for 2 h. The reaction mixture was diluted with toluene and concentrated to dryness. The residue was dissolved in dichloromethane and washed with 1M HCl and sat. aq. NaHCO3, dried with MgSO4, filtered and concentrated. Purification of the residue by size-exclusion chromatography (LH-20, DCM/MeOH 1:1) furnished compound 12 (167 mg, 91%): NMR data (CDCl3, 300 MHz): 1H, δ 1.24 (d, 1H, Thr CH3), 1.42 (s, 9H, tBu CH3), 1.55-1.59 (m, 2H, NHCH2CH2CH2NH), 1.95, 2.02, 2.03, 2.12, 2.14 (s, 15H, CH3 Ac), 3.13-3.23 (m, 3H, CH2+CH2a), 3.36-3.41 (m, 1H, CH2b), 4.03-4.12 (m, 2H), 4.19-4.23 (m, 2H, Thrβ), 4.54-4.61 (m, H-2, Thrα), 4.88 (m, 1H, NH), 4.96 (s, 1H, J=3.57 Hz, H-1), 5.07 (dd, 1H, H-3), 5.35 (d, 1H, H-4), 6.43 (br S, 1H, NH), 6.72 (br S, 1H, NH). MALDI-MS calcd for C28H46N4O13 [M+Na] m/z=669.296: found 669.323. Compound 12 was deprotected by stirring with 5% hydrazine-hydrate in methanol (5 mL) at room temperature for 35 min. The reaction mixture was diluted with toluene and concentrated. The residue was co-evaporated twice with toluene. Purification by silica gel column chromatography (DCM/MeOH 5:1) yielded 13 (119 mg, 89%): NMR data (CD3OD, 300 MHz): 1H, δ 1.26 (d, 3H, Thr CH3), 1.43 (s, 9H, tBu CH3), 1.57-1.63 (m, 2H, NHCH2CH2CH2NH), 2.06, 2.10 (s, 2×3H NHAc), 2.12-3.09 (m, 2H, CH2), 3.15 (m, 2H, CH2), 3.31 (br s, 2H, H-6), 3.68-3.76 (m, 2H, H-3, H-5), 3.88 (d, 1H, H-4), 4.22-4.26 (m, 2H, H-2, Thrβ), 4.46 (m, 1H, Thrα), 4.84 (d, 1H, H-1), 6.60 (br m, 1H, NH), 7.50 (br d, 1H, NH). MALDI-MS calcd. for C22H40N4O10 [M+Na] m/z=543.264: found 543.301. A solution of 13 in trifluoro acetic acid (4 mL) was stirred under an argon atmosphere at ambient temperature for 45 min. The reaction mixture was then diluted with DCM and concentrated to dryness. The crude product was purified by column chromatography (latro beads, EtOAc/MeOH/H2O 2:2:1→MeOH/H2O 1:1). After concentration of the pooled fractions, the solid was lyophilized from H2O to give compound 7 (91 mg, 0.21 mmol, 95%) as a white powder. Rf=0.17 (EtOAc/MeOH/H2O 6:3:1); [α]D-37 (c 1.0 mg/mL, H2O); NMR data (D2O, 300 MHz): 1H, δ 1.15 (d, 3H, J=6.3 Hz, Thr CH3), 1.73-1.77 (m, 2H, CH2), 1.95 (s, 3H, NHAc), 2.04 (s, 3H, NHAc), 2.82-2.87 (m, 2H, CH2), 3.11-3.15 (m, 1H, CH2a), 3.22-3.26 (m, 1H, CH2b), 3.65 (m, 2H, H-6), 3.76 (dd, 1H, J=2.9, 11.2 Hz, H-3), 3.87 (d, 1H, J=2.9 Hz, H-4), 3.92 (t, 1H, H-5), 3.99 (dd, 1H, J=3.41, 11.2 Hz, H-2), 4.28-4.30 (m, 1H, Thrβ), 4.32 (d, 1H, J=2.4 Hz, Thrα) 4.78 (d, 1H, J=3.56 Hz, J=3.9 Hz, H-1), 7.97 (br d, 1H, NH), 8.17 (br t, 1H, NH), 8.27 (br d, 1H, NH); 13C (D2O, 75 MHz), δ 18.17 Thr CH3), 21.93, 22.33 (2× NAc) 26.98 (CH2), 36.55 (CH2), 37.22 (CH2), 49.98 (C-6), 58.30 (C-3), 61.46 (C-4), 67.76 (C-5), 68.65 (C-2), 71.54 (C-Thrβ), 74.60 (C-Thrα), 98.60 (C-1), 172.09, 174.37, 175.18 (3× C═O, NHAc). HR-MALDI-MS calcd for C17H32N4O8 [M+Na] m/z=443.2118: found 443.2489.
Liposome preparation. Liposomes were prepared from PC, PG, cholesterol, and the glycolipopeptide 9 (15 μmol, molar ratio 65:25:50:10). The lipids were dissolved in DCM/MeOH (3/1, v/v) under an atmosphere of argon. The solvent was then removed by passing a stream of dry nitrogen gas, followed by further drying under high vacuum for one hour. The resulting lipid film was suspended in 1 mL 10 mM Hepes buffer, pH 6.5, containing 145 mM NaCl. The solution was vortexed on a shaker (250 rpm), under Ar atmosphere at 41° C. for 3 hours. The liposome suspension was extruded ten-times through 0.6 μm, 0.2 μm and 0.1 μm polycarbonate membranes (Whatman, Nuclepore®, Track-Etch Membrane) at 50° C. to obtain SUV.
Immunizations. Groups of five mice (female BALB/c, 6 weeks) were immunized subcutaneously on days 0, 7, 14 and 21 with 0.6 μg of carbohydrate-containing liposomes and 10 μg of the adjuvant QS-21 in each boost. The mice were bled on day 28 (leg-vein) and the sera were tested for the presence of antibodies.
ELISA. 96-well plates were coated over night at 4° C. with Tn-BSA, (2.5 μg mL−1) in 0.2 M borate buffer (pH 8.5) containing 75 mM sodium chloride (100 μL) per well). The plates were washed three times with 0.01 M Tris buffer containing 0.5% Tween 20% and 0.02% sodium azide. Blocking was achieved by incubating the plates 1 h at room temperature with 1% BSA in 0.01 M phosphate buffer containing 0.14 M sodium chloride. Next, the plates were washed and then incubated for 2 h at room temperature with serum dilutions in phosphate buffered saline. Excess antibody was removed and the plates were washed three times. The plates were incubated with rabbit anti-mouse IgM and IgG Fcγ fragment specific alkaline phosphatase conjugated antibodies (Jackson ImmunoResearch Laboratories Inc., West Grove, Pa.) for 2 h at room temperature. Then, after the plates were washed, enzyme substrate (p-nitrophenyl phosphate) was added and allowed to react for 30 min before the enzymatic reaction was quenched by addition of 3 M aqueous sodium hydroxide and the absorbance read at dual wavelengths of 405 and 490 nm. Antibody titers were determined by regression analysis, with log10 dilution plotted against absorbance. The titers were calculated to be the highest dilution that gave two times the absorbance of normal mouse sera diluted 1:120.
In a first set of experiments, the tumor-related carbohydrate B-epitope and the universal T-epitope peptide were incorporated separately into preformed liposomes to form a diepitopic construct. Additionally, the lipopeptide Pam3Cys was incorporated into the liposome with the expectation that it would function as a built-in adjuvant, and thus circumvent the necessity of using an additional external adjuvant, such as QS-21.
The liposomes were prepared from lipid anchors carrying two different thiol-reactive functionalities, maleimide and bromoacetyl, at their surface. The Pam3Cys adjuvant was also incorporated into the preformed liposome and included a maleimide functionality. Conveniently, the maleimide and the bromoacetyl group show a marked difference in their reactivity towards sulfhydryl groups. The maleimide reacts rapidly with a sulfhydryl compound at pH 6.5, whereas the bromoacetyl requires slightly higher pH 8-9 to react efficiently with a thiol compound.
By exploiting this difference in reactivity, a diepitope liposome construct carrying the cancer related Ley tetrasaccharide and the universal T helper peptide QYIKANSKFIGITEL (QYI) (SEQ ID NO:1) was prepared (Scheme 11). For the conjugation to the thiol-reactive anchors, both the oligosaccharide and the peptide were functionalized with a thiol-containing linker. The two-step consecutive conjugation to preformed liposomes has a great advantage: it is a very flexible approach that makes it easy to prepare liposomes carrying an array of different carbohydrate B-epitopes. The yield of conjugation, as based on quantitating the carbohydrate and peptide covalently coupled to the vesicles, was high, 70-80% for the oligosaccharide and 65-70% for the peptide, and the results were highly reproducible.
It is important to note that in these first diepitope liposome constructs, the carbohydrate B-epitope and peptide T-epitope are not themselves joined together by covalent linkages, but rather are held in proximity by their respective lipid anchors to which they are conjugated, and by hydrophobic interactions. It has been shown in several reports in the literature regarding vaccine candidates with pathogen-related peptide B-epitopes that this approach is successful leading to good titers of both IgM and specific IgG antibodies. These studies also indicate that the built-in adjuvant Pam3Cys is sufficient to induce a proper immune response.
However, in our study with the tumor-related carbohydrate B-epitope Ley, immunizations of mice using the non-covalently linked diepitope liposome preparation described in this Example resulted in only very low titers of IgM antibodies. No IgG anti-Ley antibodies were detected. Even more surprising, co-administering the liposomal vaccine candidate with the powerful external adjuvant, QS-21, did not improve the outcome. Additionally, it was found that mice that had been immunized with an un-coated liposome control, i.e. a liposome that carried nothing but the maleimide and bromoacetyl functional groups on the surface, elicited high titers of IgG antibodies as detected by ELISA. More detailed ELISA studies of the anti-sera from this group of mice using a variety of protein conjugates revealed that the mice had responded to and elicited antibodies towards the maleimide linker. Also the anti-sera from the mice immunized with the liposomes coated with the Ley antigen and the QYI peptide were screened for anti-linker antibodies and it was found that also these mice had elicited IgG antibodies towards the maleimide linker.
Due to its high reactivity at near neutral pH, the maleimide linker is widely used in conjugation chemistry to reach glyco- and peptide-protein conjugates that are further used in immunization studies. There are commercially available protein conjugation kits (Pierce Endogen Inc.) that utilize the maleimide linker both for the antigenic conjugate and the detection conjugate. Our data show that using these kits can lead to false positive results, especially when working with antigens of low immunogenicity (See T. Buskas, Y. Li and G-J. Boons, Chem. Eur. J., 10:3517-3523, 2004).
To test whether the highly immunogenic maleimide linker suppressed the immune response towards the Ley tetrasaccharide, we prepared the non-covalent diepitope liposome using only the bromoacetyl linker. In this experiment, the thiol-containing Ley tetrasaccharide and the universal T helper peptide were conjugated, in separate reactions, to lipids containing the bromoacetyl linker. The conjugated lipids were then mixed together to form lipid vesicles. Administering this new liposome formulation to mice, with or without the external adjuvant QS-21, raised only low titers of anti-Ley antibodies. Thus, the lack of an effective immune response toward the Ley tetrasaccharide was not due solely to the immunogenic maleimide linker.
Since the tumor-associated Ley tetrasaccharide is known to be only weakly immunogenic, we prepared another diepitope liposomal construct where the more immunogenic Tn(cluster) antigen was used as a target B-epitope. However, the same negative results were obtained with this antigen. Again, immunizations of mice resulted in only very low titers of anti-Tn(c) IgM antibodies. Co-administering with QS-21 as an external adjuvant did nothing to enhance the immune response.
From these results we concluded that the non-covalently linked diepitope liposome approach that has proven successful for a range of peptide antigens failed when a tumor-associated carbohydrate antigen of low immunogenicity was used as a B-epitope. Thus, we reasoned that the tumor-associated carbohydrate B-epitope and the helper T-epitope needed to be presented differently to the immune system to evoke a T-cell dependent immune response.
We speculated that in order to achieve a better presentation of the carbohydrate B-epitope and peptide T-epitope, perhaps they needed to be covalently linked together. To test this idea we synthesized construct 1 (Scheme 12), a structurally well-defined anti-cancer vaccine candidate containing the structural features needed for a focused and effective T-cell dependent immune response. The vaccine candidate is composed of the tumor-associated Tn-antigen, the peptide T-epitope YAFKYARHANVGRNAFELFL (YAF) (SEQ ID NO:2) (Neisseria meningitides) and the lipopeptide Pam3Cys. Due to difficulties in the synthesis using the original helper T-epitope peptide QYI, a different universal T-epitope (YAF) that displayed better solubility properties was used in this study.
Compound 1 was synthesized in a highly convergent manner by a combination of solid-phase and solution phase synthesis.
The construct was then incorporated into phospholipid-based liposomes. Compound 1 suffers from low solubility in a range of solvents, which probably is the main reason the incorporation into the liposomes was only 10%.
Mice were immunized with the construct at weekly intervals. To explore the adjuvant properties of the built-in lipopeptide Pam3Cys, the antigen-containing liposomes were administered with (group 2) or without (group 1) the adjuvant QS-21.
As can be seen in Table 1 (Example I), the mice immunized with the liposome preparations elicited both IgM and IgG antibodies against the Tn-antigen (Table 1, entries 1 and 2). The presence of IgG antibodies indicated that the helper T-epitope peptide of 1 had activated helper T-lymphocytes. Furthermore, the observation that IgG antibodies were raised by mice which were immunized with liposomes in the absence of the external adjuvant QS-21 (group 1) indicated that the built-in adjuvant Pam3Cys had triggered appropriate signals for the maturation of DCs and their subsequent activation of helper T-cells. However, the mice which received the liposomes in combination with QS-21 (group 2) elicited higher titers of anti Tn-antibodies. This stronger immune response may be due to a shift from a mixed Th1/Th2 to a Th1 skewed response.
The results provide, for the first time, a proof-of-principle for the use of a lipidated glycopeptide that contains a carbohydrate B-epitope, a helper T-cell epitope and a lipopeptide adjuvant as a minimal, self-contained subunit vaccine. It was also concluded that to evoke a T-cell dependent immune response toward the tumor-associated carbohydrate antigen, it is not enough that the carbohydrate B-epitope and the peptide T-epitope are presented together in a non-covalent manner on the surface of a adjuvant-containing liposome; rather, the entities are preferably covalently joined together. Finally, it was observed that an external adjuvant (QS-21) was not needed when the three components (carbohydrate B-epitope, helper T-cell epitope and lipopeptide) are covalently linked to form the lipidated glycopeptides.
Several improvements can be made to compound 1. For example, it has been found that antibodies elicited against the Tn-antigen poorly recognize cancer cells. However, clustering (Nakada et al., Proc. Natl. Acad. Sci. USA 1993, 90, 2495-2499; Reddish et al., 1997, 14, 549-560; Zhang et al., Cancer Res. 1995, 55, 3364-3368; Adluri et al., Cancer Immunol. Immunother 1995, 41, 185-192) or presenting the Tn antigen as part of the MUC-1 glycopeptide elicits antibodies with improved binding characteristics (Snijdewint et al., Int. J. Cancer 2001, 93, 97-106 The T-epitope employed in compound 1 is a MHC class II restricted epitope for humans. Thus, a more efficient class-switch to IgG antibodies may be expected when a murine T-epitope is used. Furthermore, it has been found that the lipopeptide Pam2Cys or Pam3CysSK4 are more potent immunoadjuvants than Pam3Cys (Spohn et al., Vaccine 2004, 22, 2494-2499). However, it was not known whether attachment of Pam2Cys or Pam3CysSK4 to the T- and B-epitope would affect their efficacies and potencies. Thus, based on these considerations, compounds 2 and 3 (Scheme 12) were designed, which contain the MUC-1 glycopeptide as a B-epitope, the well-documented murine helper T-cell epitope KLFAVWKITYKDT (KLF) (SEQ ID NO:3) derived from Polio virus (Leclerc et al., J. Virol. 1991, 65, 711-718) as the T-epitope, and the lipopeptide Pam2Cys or Pam3CysSK4, respectively.
Glycolipopeptides 2 and 3 were incorporated into phospholipid-based liposomes as described for compound 1. Surprisingly, the solubility problems that plagued compound 1 were not an issue for compounds 2 and 3. Female BALB/c mice were immunized four times at weekly intervals with the liposome formulations with or without the external adjuvant QS-21 (Kensil et al., J. Immunol. 1991, 146, 431-437). Anti-Muc1 antibody titers were determined by coating microtiter plates with CTSAPDT(αGalNAc)RPAP conjugated to BSA and detection was accomplished with anti-mouse IgG antibodies labeled with alkaline phosphatase. The results are summarized in Tables 2 and 3.
As can be seen in Table 2, mice immunized with liposomal preparations of compounds 2 and 3 elicited high titers of anti-MUC-1 IgG antibodies. Surprisingly, mice that were immunized with the Pam3CysSK4-based vaccine elicited higher titers of antibodies than mice immunized with Pam2Cys derivative. These results are contradictory to reports that have compared adjuvancy of Pam2Cys and Pam3CysSK4. Sub-typing of the IgG antibodies (IgG1, IgG2a, IgG2b and IgG3) indicated a bias towards a Th2 immune response (entries 1 and 3, Table 3). Co-administering of the adjuvant QS-21 did not lead to a significant increase of IgG antibody, however, in these cases a mixed Th1/Th2 response was observed (entries 2 and 4, Table 3).
To ensure that the mouse sera were able to recognize native MUC-1 glycopeptide present on cancer cells, the binding of the sera to the MUC-1 expressing MCF-7 human breast cancer cell line was examined. Thus, the cells were treated with a 1:50 diluted sera for 30 minutes after which goat anti-mouse IgG antibodies labeled with FITC was added. The percentage of positive cells and mean fluorescence was determined by flow cytometry analysis. As can be seen in (
The lipopeptide moiety of the three-component vaccine is required for initiating the production of necessary cytokines and chemokines (danger signals) (Bevan, Nat. Rev. Immunol. 2004, 4, 595-602; Eisen et al., Curr. Drug Targets 2004, 5, 89-105; Akira et al., Nat. Immunol. 2001, 2, 675-680; Pasare et al., Immunity 2004, 21, 733-741; Dabbagh et al., Curr. Opin. Infect. Dis. 2003, 16, 199-204; Beutler, Mol. Immunol. 2004, 40, 845-859). The results of recent studies indicate that the lipopeptide initiates innate immune responses by interacting with the Toll-like receptor 2 on the surface of mononuclear phagocytes. After activation, the intracellular domain of TLR-2 recruits the adaptor protein MyD88, resulting in the activation of a cascade of kinases leading to the production of a number of cytokines and chemokines. On the other hand, lipopolysaccharides induce cellular responses by interacting with the Toll-like receptor 4 (TLR4)/MD2, which results in the recruitment of the adaptor proteins MyD88 and TRIF leading to a more complex pattern of cytokine. TNF-α secretion is the prototypical measure for activation of the MyD88-dependent pathway, whereas secretion of IFN-β is commonly used as an indicator of TRIF-dependent cellular activation (Akira et al., Nat. Immunol. 2001, 2, 675-680; Beutler, Mol. Immunol. 2004, 40, 845-859).
To examine whether attachment of a glycopeptide containing a T epitope and a B epitope to the TLR ligand affects cytokine production, the efficacy (EC50) and potency (maximum responsiveness) of TNF-α and IFN-β secretion induced by compounds 1, 2 and 3 was determined and the results compared with those of Pam2CysSK4, Pam3CysSK4 and LPS. Thus, RAW NO− mouse macrophages were exposed over a wide range of concentrations to compounds 1, 2 and 3, Pam2CysSK4, Pam3CysSK4 and E. coli 055:B5 LPS. After 5 hours, the supernatants were harvested and examined for mouse TNF-α and IFN-β using commercial or in-house developed capture ELISA assays, respectively.
E. coli LPS
As can be seen in
It was speculated that in addition to initiating the production of cytokines and chemokines, the lipopeptide may facilitate selective targeting and uptake by antigen presenting cells in a TLR2 dependent manner. To test this hypothesis, compounds 4, which contains a fluorescence label, was administered to RAW NO-mouse macrophages and after 30 minutes the cells were harvested, lysed and the fluorescence measured. To account for possible cell surface binding without internalization, the cells were also trypsinized before lyses and then examination for fluorescence. As can be seen in
To establish the importance of covalent attachment of the TLR ligand to the vaccine candidate, compound 5 (Scheme 13) which only contains the B-epitope and the T-epitope was designed and synthesized. Mice were immunized four times at weekly intervals with this compound in the presence of PAM3CysSK4. Interestingly, the mixture of glycopeptide 5 and the adjuvant Pam3CysSK4 elicited no- or very low titers of IgG antibodies, demonstrating that covalent attachment of Pam3CysSK4 to the B-epitope and T-epitope is critical for strong immune responses.
To determine the importance of lipidation with a ligand of a Toll like receptor, compound 6 (Scheme 14) was designed and synthesized. This compound is composed of the B-epitope and T-epitope linked to non-immunogenic lipidated amino acids. Mice were immunized with a liposomal preparation of compound 6, similar to the procedure employed for compound 1 and 2. Liposomes containing compound 6 induced titers that were significantly lower than those elicited by compound 3, demonstrating that a TLR ligand of the three-component vaccine is important for optimal immune responses.
The three-component carbohydrate-based vaccine has a number of distinctive advantages over a traditional conjugate vaccine. For example, the minimal subunit vaccine does not suffer from epitope suppression, a characteristic of carbohydrate-protein conjugates. Apart from providing danger signals, the lipopeptide Pam3CysSK4 also facilitates the incorporation of the antigen into liposomes. A liposomal formulation is attractive because it presents efficiently the antigen to the immune system. A unique feature of the vaccine is that Pam3CysSK4 promotes selective targeting and uptake by antigen presenting cells, T-helper cells and B-lymphocytes, which express Toll loll like receptors (Example III). Finally, a fully synthetic compound has as an advantage that it can be fully characterized, which facilitates its production in a reproducible manner.
In this Example, a number of fully synthetic vaccine candidates have been designed, chemically synthesized, and immunologically evaluated to establish strategies to overcome the poor immunogenicity of tumor-associated carbohydrates and glycopeptides and to study in detail the importance of TLR engagement for antigenic responses. Covalent attachment of a TLR2 agonist, a promiscuous peptide T-helper epitope, and a tumor-associated glycopeptide, gives a compound that elicits in mice exceptionally high titers of IgG antibodies which recognize cancer cells expressing the tumor-associated carbohydrate.
The over-expression of oligosaccharides, such as Globo-H, LewisY, and Tn antigens is a common feature of oncogenic transformed cells (Springer, Mol. Med. 1997, 75, 594-602; Hakomori, Acta Anat. 1998, 161, 79-90; Dube, Nat. Rev. Drug Discov. 2005, 4, 477-488). Numerous studies have shown that this abnormal glycosylation can promote metastasis (Sanders, J. Clin. Pathol. Mol. Pathol. 1999, 52, 174-178) and hence the expression of these compounds is strongly correlated with poor survival rates of cancer patients. A broad and expanding body of preclinical and clinical studies demonstrates that naturally acquired, passively administered or actively induced antibodies against carbohydrate-associated tumor antigens are able to eliminate circulating tumor cells and micro-metastases in cancer patients (Livingston, Cancer Immunol. 1997, 45, 10-19; Ragupathi, Cancer Immunol. 1996, 43, 152-157; von Mensdorff-Pouilly, Int. J. Cancer 2000, 86, 702-712; Finn, Nat. Rev. Immunol. 2003, 3, 630-641).
Traditional cancer vaccine candidates composed of a tumor-associated carbohydrate (Globo-H, LewisY, and Tn) conjugated to a foreign carrier protein (e.g. KLH and BSA) have failed to elicit sufficiently high titers of IgG antibodies in most patients. It appears that the induction of IgG antibodies against tumor-associated carbohydrates is much more difficult than eliciting similar antibodies against viral and bacterial carbohydrates. This observation is not surprising because tumor associated saccharides are self-antigens and consequently tolerated by the immune system. The shedding of antigens by the growing tumor reinforces this tolerance. In addition, a foreign carrier protein such as KLH can elicit a strong B-cell response, which may lead to the suppression of an antibody response against the carbohydrate epitope. The latter is a greater problem when self-antigens such as tumor-associated carbohydrates are employed. Also, linkers that are utilized for the conjugation of carbohydrates to proteins can be immunogenic leading to epitope suppression (Buskas, Chem. Eur. J. 2004, 10, 3517-3524; Ni, Bioconjug. Chem. 2006, 17, 493-500). It is clear that the successful development of a carbohydrate-based cancer vaccine requires novel strategies for the more efficient presentation of tumor-associated carbohydrate epitopes to the immune system, resulting in a more efficient class switch to IgG antibodies (Reichel, J. Chem. Commun. 1997, 21, 2087-2088; Alexander, J. Immunol. 2000, 164, 1625-1633; Kudryashov, Proc. Natl. Acad. Sci. U.S.A. 2001, 98, 3264-3269; Lo-Man, J. Immunol. 2001, 166, 2849-2854; Jiang, Curr. Med. Chem. 2003, 10, 1423-1439; Jackson, Proc. Natl. Acad. Sci. U.S.A. 2004, 101, 15440-5; Lo-Man, Cancer Res. 2004, 64, 4987-4994; Buskas, Angew. Chem. Int. Ed. 2005, 44, 5985-5988 (Example I); Dziadek, Angew. Chem. Int. Ed. 2005, 44, 7630-7635; Krikorian, Bioconjug. Chem. 2005, 16, 812-819; Pan, J. Med. Chem. 2005, 48, 875-883).
Advances in the knowledge of the cooperation of innate and adaptive immune responses (Pasare, Semin. Immunol. 2004, 16, 23-26; Pashine, Nat. Med. 2005, 11, S63-S68; Akira, Nat. Rev. Immunol. 2004, 4, 499-511; O'Neill, Curr Opin Immunol 2006, 18, 3-9; Lee, Semin Immunol 2007, 19, 48-55; Ghiringhelli, Curr Opin Immunol 2007, 19, 224-31) are offering new avenues for vaccine design for diseases such as cancer, for which traditional vaccine approaches have failed. The innate immune system responds rapidly to families of highly conserved compounds, which are integral parts of pathogens and perceived as danger signals by the host. Recognition of these molecular patterns is mediated by sets of highly conserved receptors, such as Toll-like receptors (TLRs), whose activation results in acute inflammatory responses such as direct local attack against invading pathogens and the production of a diverse set of cytokines. Apart from antimicrobial properties, the cytokines and chemokines also activate and regulate the adaptive component of the immune system (Lin, J Clin Invest 2007, 117, 1175-83). In this respect, cytokines stimulate the expression of a number of co-stimulatory proteins for optimum interaction between T-helper cells and B- and antigen presenting cells (APC). In addition, some cytokines and chemokines are responsible for overcoming suppression mediated by regulatory T-cells. Other cytokines are important for directing the effector T-cell response towards a T-helper-1 (Th-1) or T-helper-2 (Th-2) phenotype (Dabbagh, Curr. Opin. Infect. Dis. 2003, 16, 199-204).
Recently, we described a fully synthetic three-component vaccine candidate (compound 21,
To establish the optimal architecture of a fully synthetic three-component cancer vaccine and to study in detail the importance of TLR engagement for antigenic responses, we have chemically synthesized, and immunologically evaluated a number of fully synthetic vaccine candidates. It has been found that a liposomal preparation of compound 22, which is composed of an immunosilent lipopeptide, a promiscuous peptide T-helper epitope, and a MUC-1 glycopeptide, is significantly less antigenic than compound 21, which is modified with a TLR2 ligand (Pam3CysSK4). However, liposomal preparations of compound 22 with Pam3CysSK4 (23) or monophosphoryl lipid A (24), which are TLR2 and TLR4 agonists, respectively, elicited titers comparable to compound 21. However, the antisera elicited by mixtures of 22 and 23 or 24 had an impaired ability to recognize cancer cells. Surprisingly, a mixture of compounds 25 and 26, which are composed of a MUC-1 glycopeptide B-epitope linked to lipidated amino acids and the helper T-epitope attached to Pam3CysSK4, did not raise antibodies against the MUC-1 glycopeptide. Collectively, the results demonstrate that TLR engagement is not essential but greatly enhanced antigenic responses against the tumor-associated glycopeptide MUC-1. Covalent attachment of the TLR agonist to the B- and helper T-epitope is important for antibody maturation for improved cancer cell recognition.
Compound 21 (
Pure compound 22 was obtained after purification of the crude product by precipitation with ice-cold diethyl ether followed by HPLC on a C-4 semi-preparative column. A similar protocol was used for the synthesis of compound 25. Derivative 26 was synthesized by SPPS on a Rink amide resin and after assembly of the peptide, the resulting product was coupled manually with N-fluorenylmethoxycarbonyl-R-(2,3-bis(palmitoyloxy)-(2R-propyl)-(R)-cysteine (Fmoc-Pam2Cys-OH) (Metzger, Int. J. Pept. Protein Res. 1991, 38, 545-554). The N-Fmoc group of the product was removed with 20% piperidine in DMF and the resulting amine was coupled with palmitic acid using and PyBOB, HOBt and DIPEA in DMF. The lipopeptide was treated with reagent B to cleavage it from the resin and to remove side chain protecting groups. The crude product was purified by precipitation with ice-cold diethyl ether followed by HPLC on a C-4 semi-preparative column.
Compounds 21 and 22 were incorporated into phospholipid-based small uni-lamellar vesicles (SUVs) by hydration of a thin film of egg phosphatidylcholine (PC), phosphatidylglycerol (PG), cholesterol (Chol), and compound 21 or 22 (molar ratios: 65/25/50/10) in a HEPES buffer (10 mM, pH 6.5) containing NaCl (145 mM) followed by extrusion through 100 nm Nuclepore® polycarbonate membrane. Groups of five female BALB/c mice were immunized subcutaneously four times at weekly intervals with liposomes containing 3 μg of saccharide. Furthermore, similar liposomes were prepared of a mixture of glycopeptide 22 with 23 or 24 (molar ratios: PC/PG/Chol/22/23 or 24, 65/25/5/5/5) in HEPES buffer and administered four times at weekly intervals prior to sera harvesting. Finally, mice were immunized with a liposomal preparation of compound 25 and 26 (molar ratios: PC/PG/Chol/25/26, 65/25/5/5/5) employing standard procedures.
Anti-MUC-1 antibody titers of anti-sera were determined by coating microtiter plates with the MUC-1 derived glycopeptide TSAPDT(α-D-GalNAc)RPAP conjugated to BSA and detection was accomplished with anti-mouse IgM or IgG antibodies labeled with alkaline phosphatase. Mice immunized with 21 elicited exceptionally high titers of anti-MUC-1 IgG antibodies (Table 5). Sub-typing of the IgG antibodies (IgG1, IgG2a, IgG2b, and IgG3) indicated a bias towards a Th2 immune response. Furthermore, the observed high IgG3 titer is typical of an anti-carbohydrate response. Immunizations with glycolipopeptide 22, which contains lipidated amino acids instead of a TLR2 ligand, resulted in significantly lower titers of IgG antibodies demonstrating that TLR engagement is very important for optimum antigenic responses. However, liposomal preparations of compound 22 with Pam3CysSK4 (23) or monophosphoryl lipid A (24) elicited IgG (total) titers similar to 21. In the case of the mixture of 22 with 23, the immune response was biased towards a Th2 response as evident by high IgG1 and low IgG2a,b titers. On the other hand, the use of monophosphoryl lipid A led to significant IgG1 and IG2a,b responses, and thus this preparation elicited a mixed Th1/Th2 response. Finally, liposomes containing compound 25 and 26 did not induce measurable titers of anti MUC-1 antibodies indicating that the B- and T epitope need to be covalent linked for antigenic responses.
aAnti-MUC1 and anti-T-epitope antibody titers are presented as the median for groups of five mice. ELISA plates were coated with BSA-MI-MUC1 conjugate for anti-MUC1 antibody titers or neutravidin-biotin-T-epitope for anti-T-epitope antibody titers. Titers were determined by linear regression analysis, plotting dilution vs. absorbance. Titers are defined as the highest dilution yielding an optical density of 0.1 or greater over that of normal control mouse sera.
bLiposomal preparations were employed.
Next, possible antigenic responses against the helper T-epitope were investigated. Thus, streptavidin coated microtiter plates were treated with the helper T-epitope modified with biotin. After the addition of serial dilutions of sera, detection was accomplished with anti-mouse IgM or IgG antibodies labeled with alkaline phosphatase. Interestingly, compound 21 elicited low whereas mixtures of 22 with 23 or 24 elicited no antibodies against the helper T-epitope.
Pam3CysSK4 or monophosphoryl lipid A are employed for initiating the production of cytokines by interacting with TLR2 or TLR4, respectively, on the surface of mononuclear phagocytes (Kawai, Semin. Immunol. 2007, 19, 24-32). After activation with Pam3CysSK4, the intracellular domain of TLR2 recruits the adaptor protein MyD88 resulting in the activation of a cascade of kinases leading to the production of a number of cytokines and chemokines. On the other hand, lipopolysaccharides (LPS) and lipid As induce cellular responses by interacting with the TLR4/MD2 complex, which results in the recruitment of the adaptor proteins MyD88 and TRIF leading to the induction of a more complex pattern of cytokine. TNF-α secretion is the prototypical measure for activation of the MyD88-dependent pathway, whereas secretion of IFN-β is commonly used as an indicator of TRIF-dependent cellular activation.
To examine cytokine production, mouse macrophages (RAW γNO(−) cells) were exposed over a wide range of concentrations to compounds 21-24, E. coli 055:B5 LPS and prototypic E. coli bisphosphoryl lipid A (Zhang, J. Am. Chem. Soc. 2007, 129, 5200-5216). After 5.5 h, the supernatants were harvested and examined for mouse TNF-α and IFN-β using commercial or in-house developed capture ELISAs, respectively (
Next, the ability of the mouse antisera to recognize native MUC-1 antigen present on cancer cells was established. Thus, serial dilutions of the serum samples were added to MUC-1 expressing MCF-7 human breast cancer cells (Horwitz, Steroids 1975, 26, 785-95) and recognition was established using a FITC-labeled anti-mouse IgG antibody. As can be seen in
Although sera obtained from mice immunizations with a mixture of lipidated T-B epitope (22) and Pam3CysSK4 (23) elicited equally high IgG antibody titers as 21 (table 5), a much-reduced recognition of MCF-7 cells was observed. This result indicates that covalent attachment of the adjuvant PamsCysSK4 (23) to the B-T epitope is important for proper antibody maturation leading to improved cancer cell recognition. Immunizations with a mixture of compound 22 and monophosphoryl lipid A (24) led to variable results and two mice displayed excellent, and three modest, recognition of MCF-7 cells.
Most efforts aimed at developing carbohydrate-based cancer vaccines have focused on the use of chemically synthesized tumor-associated carbohydrates linked through an artificial linker to a carrier protein (Springer, Mol. Med. 1997, 75, 594-602; Dube, Nat. Rev. Drug Discov. 2005, 4, 477-488; Ouerfelli, Expert Rev. Vaccines 2005, 4, 677-685; Slovin, Immunol. Cell Biol. 2005, 83, 418-428). It has been established that the use of KLH as a carrier protein in combination with the powerful adjuvant QS-21 gives the best results. However, a drawback of this approach is that KLH is a very large and cumbersome protein that can elicit high titers of anti-KLH-antibodies (Cappello, Cancer Immunol Immunother 1999, 48, 483-492), leading to immune suppression of the tumor-associated carbohydrate epitope. Furthermore, the conjugation chemistry is often difficult to control as it results in conjugates with ambiguities in composition and structure, which may affect the reproducibility of immune responses. Also, the linker moiety can elicit strong B-cell responses (Buskas, Chem. Eur. J. 2004, 10, 3517-3524; Ni, Bioconjug. Chem. 2006, 17, 493-500). Not surprisingly, preclinical and clinical studies with carbohydrate-protein conjugates have led to results of mixed merit. For example, mice immunized with a trimeric cluster of Tn-antigens conjugated to KLH (Tn(c)-KLH) in the presence of the adjuvant QS-21 elicited modest titers of IgG antibodies (Kuduk, J. Am. Chem. Soc. 1998, 120, 12474-12485). Examination of the vaccine candidate in a clinical trial of relapsed prostate cancer patients gave low median IgG and IgM antibody titer (Slovin, J. Clin. Oncol. 2003, 21, 4292-4298).
The studies reported herein show that a three-component vaccine, in which a MUC-1 associated glycopeptide B-epitope, a promiscuous murine MHC class II restricted helper T-cell epitope, and a TLR2 agonist (21) are covalently linked, can elicit robust IgG antibody responses. Although covalent attachment of the TLR2 ligand to the T-B glycopeptide epitope was not required for high IgG antibody titers, it was found to be very important for optimal cancer cell recognition. In this respect, liposomes containing compounds 21 or a mixture compound 22 and TLR2 agonist 23 elicited similar high anti-MUC-1 IgG antibody titers. However, antisera obtained from immunizations with 21 recognized MUC-1 expressing cancer cells at much lower sera dilutions than antisera obtained from immunizations with a mixture of 22 and 23. It appears that immunizations with three-component vaccine 21 lead to more efficient antibody maturation resulting in improved cancer cell recognition.
Differences in antigenic responses against the helper T-epitope were also observed. Thus, 21 elicited low titers of IgG antibodies against the helper T-epitope whereas mixtures of 22 with 23 induced no antigenic responses against this part of the candidate vaccine. Thus, the covalent attachment of the TLR2 ligand makes compound 21 more antigenic resulting in low antibody responses against the helper T-epitope.
It was observed that a mixture of compound 22 with 23 or 24 induced similar high titers of total IgG antibodies. However, a bias towards a Th2 response (IgG1) was observed when the TLR2 agonist Pam3CysSK4 (23) was employed whereas mixed Th1/Th2 responses (IgG2a,b) was obtained when the TLR4 agonist monophosphoryl lipid A (24) was used. The difference in polarization of helper T-cells is probably due to the induction of different patterns of cytokines by TLR2 or TLR4. In this respect, it was previously observed that Pam3Cys induces lower levels of Th1 inducing cytokines II-12(p70) and much higher levels of Th2-inducing IL-10 than E. coli LPS (Dillon, B. J Immunol 2004, 172, 4733-43). The differences are likely due to the ability of TLR4 to recruit the adaptor proteins MyD88 and Trif whereas TLR2 can only recruit MyD88. The results indicate that the immune system can be tailored in a particular direction by proper selection of an adjuvant, which is significant since different IgG isotypes perform different effector functions.
The results described herein also show that compound 22 alone, which contains an immuno-silent lipopeptide, elicits much lower IgG titers compared to compound 21, which is modified by a TLR2 ligand. In particular, the ability of compound 22 to elicit IgG2 antibodies was impaired. Recent studies employing mice deficient in TLR signaling have cast doubt about the importance of these innate immune receptors for adaptive immune responses (Blander, Nature 2006, 440, 808-812; Gavin, Science 2006, 314, 1936-1938; Meyer-Bahlburg, J Exp Med 2007, 204, 3095-101; Pulendran, N Engl J Med 2007, 356, 1776-8). In this respect, studies with MyD88 deficient mice showed that IgM and IgG1 are largely, but not completely, dependent of TLR signaling whereas the IgG2 isotype is entirely TLR-dependent (Blander, Nature 2006, 440, 808-812). These observations, which are in agreement with the results reported here, were attributed to a requirement of TLR signaling for B-cell maturation. However, another study found that MyD88−/−/Triflps/lps double knockout mice elicited similar titers of antibodies as wild type mice when immunized with trinitrophenol-hemocyanin (TNP-Hy) or TNP-KLH in the presence or absence of several adjuvants (Gavin, Science 2006, 314, 1936-1938). It was concluded that it might be desirable to exclude TLR agonists from adjuvants. It has been noted that the importance of an adjuvant may depend on the antigenicity of the immunogen (Meyer-Bahlburg, J Exp Med 2007, 204, 3095-101; Pulendran, N Engl J Med 2007, 356, 1776-8). In this respect, proteins conjugates of TNP are highly antigenic and may not require an adjuvant for optimal responses. However, self-antigens such as tumor-associated carbohydrates have low intrinsic antigenicity and the results reported here clearly show that much more robust antibody responses are obtained when a TLR ligand is co-administered. In addition, it is demonstrated here that the architecture of a candidate vaccine is very important for optimal antigenic responses and in particular covalent attachment of a TLR ligand to a T-B epitope led to improved cancer cell recognition.
The failure of a mixture of compounds 25 and 26 to elicit anti-MUC-1 glycopeptide antibodies indicates that covalent attachment of the T- to the B-epitope is needed to elicit antigenic responses. In this respect, activation of B-cells by helper T-cells requires a similar type of cell-cell interaction as for helper T-cell activation by antigen presenting cells. Thus, a protein or peptide-containing antigen needs to be internalized by B-cells for transport to endosomal vesicles, where proteases will digest the protein and some of the resulting peptide fragments will be complexed with class II MHC protein. The class II MHC-peptide complex will then be transported to the cell surface of the B-lymphocyte to mediate an interaction with helper T-cell resulting in a class switch from low affinity IgM to high affinity IgG antibody production. Unlike antigen presenting cells, B-cells have poor phagocytic properties and can only internalize molecules that bind to the B-cell receptor. Therefore, it is to be expected that internalization of the helper T-epitope is facilitated by covalent attachment to the B-epitope (MUC-1 glycopeptide) and as a result covalent attachment of the two epitopes will lead to more robust antigenic responses.
In conclusion, it has been demonstrated that antigenic properties of a fully synthetic cancer vaccine can be optimized by structure-activity relationship studies. In this respect, it has been established that a three-component vaccine in which a tumor-associated MUC-1 glycopeptide B-epitope, a promiscuous helper T-cell epitope and a TLR2 ligand are covalently linked can elicit exceptionally high IgG antibody responses, which have an ability to recognize cancer cells. It is very important that the helper T-epitope is covalently linked to the B-epitope, probably since internalization of the helper T-epitope by B-cells requires the presence of a B-epitope. It has also been shown that incorporation of a TLR agonist is important for robust antigenic responses against tumor associated glycopeptide antigens. In this respect, cytokines induced by the TLR2 ligand are important for maturation of immune cells leading to robust antibody responses. A surprising finding was that improved cancer cell recognition was observed when the TLR2 epitope was covalently attached to the glycopeptide T-B epitope. The result presented here provides important information of the optimal constitution of three-component vaccines and will guide successful development of carbohydrate-based cancer vaccines.
Peptide synthesis: Peptides were synthesized by established protocols on an ABI 433A peptide synthesizer (Applied Biosystems), equipped with a UV-detector using Nα-Fmoc-protected amino acids and 2-(1H-bezotriazole-1-yl)-oxy-1,1,3,3-tetramethyl hexafluorophosphate (HBTU)/N-hydroxybenzotriazole (HOBt) (Knorr, Tetrahedron Lett. 1989, 30, 1927-1930) as the activating reagents. Single coupling steps were performed with conditional capping. The following protected amino acids were used: Nα-Fmoc-Arg(Pbf)-OH, Nα-Fmoc-Asp(OtBu)-OH, Nα-Fmoc-Asp-Thr(ΨMe,Mepro)-OH, Nα-Fmoc-Ile-Thr(ΨMe,Mepro)-OH, Nα-Fmoc-Lys(Boc)-OH, Nα-Fmoc-Ser(tBu)-OH, Nα-Fmoc-Thr(tBu)-OH, and Nα-Fmoc-Tyr(tBu)-OH. The coupling of glycosylated amino acid Nα-Fmoc-Thr-(AcO3-α-D-GalNAc) 1S (Cato, J. Carbohydr. Chem. 2005, 24, 503-516) was carried out manually using O-(7-azabenzotriazol-1-yl)-N,N,N′,N′-tetramethyl-uronium hexafluorophosphate (HATU)/1-hydroxy-7-azabenzotriazole (HOAt) as a coupling agent. The coupling of Nα-Fmoc-lipophilic amino acid (Nα-Fmoc-D,L-tetradeconic acid) 2S (Gibbons, Liebigs Ann. Chem. 1990, 1175-1183; Koppitz, Helv. Chim. Acta 1997, 80, 1280-1300) and Nα-Fmoc-S-(2,3-bis(palmitoyloxy)-(2R-propyl)-(R)-cysteine 3S (Metzger, Int. J. Pept. Protein Res. 1991, 38, 545-554; Roth, Bioconj. Chem. 2004, 15, 541-553), which was prepared from (R)-glycidol, were carried out using benzotriazole-1-yl-oxy-tris-pyrrolidino-phosphonium hexafluorophosphate (PyBOP)/HOBt as coupling agent (See Supporting Information). Progress of the manual couplings was monitored by standard Kaiser test (Kaiser, Anal. Biochem. 1970, 34, 595).
Liposome preparation: Egg phosphatidylcholine (PC), phosphatidylglycerol (PG), cholesterol (Chol) and compound 21 or 22 (15 mmol, molar ratios 65:25:50:10) or PC/PG/Chol/22/23 or 24 (15 mmol, molar ratios 60:25:50:10:5) or PC/PG/Chol/25/26 (15 mmol, molar ratios 65:25:50:5:5) were dissolved in a mixture of trifluoroethanol and MeOH (1:1, v/v, 5 mL). The solvents were removed in vacuo to give a thin lipid film, which was hydrated by shaking in HEPES buffer (10 mM, pH 6.5) containing NaCl (145 mM) (1 mL) under argon atmosphere at 41° C. for 3 h. The vesicle suspension was sonicated for 1 min and then extruded successively through 1.0, 0.4, 0.2, and 0.1 μm polycarbonate membranes (Whatman, Nuclepore® Track-Etch Membrane) at 50° C. to obtain SUVs. The GalNAc content was determined by heating a mixture of SUVs (50 μL) and aqueous TFA (2 M, 200 μL) in a sealed tube for 4 h at 100° C. The solution was then concentrated in vacuo and analyzed by high-pH anion exchange chromatography using a pulsed amperometric detector (HPAEC-PAD; Methrome) and CarboPac columns PA-10 and PA-20 (Dionex).
Dose and immunization schedule: Groups of five mice (female BALB/c, age 8-10 weeks; Jackson Laboratories) were immunized four times at weekly intervals. Each boost included 3 μg of saccharide in the liposome formulation. Serum samples were obtained before immunization (pre-bleed) and one week after the final immunization. The final bleeding was done by cardiac bleed.
Serologic assays: Anti-MUC-1 IgG, IgG1, IgG2a, IgG2b, IgG3, and IgM antibody titers were determined by enzyme-linked immunosorbent assay (ELISA), as described previously (Buskas, Chem. Eur. J. 2004, 10, 3517-3524). Briefly, ELISA plates (Thermo Electron Corp.) were coated with a conjugate of the MUC-1 glycopeptide conjugated to BSA through a maleimide linker (BSA-MI-MUC-1). Serial dilutions of the sera were allowed to bind to immobilized MUC-1. Detection was accomplished by the addition of phosphate-conjugated anti-mouse IgG (Jackson ImmunoResearch Laboratories Inc.), IgG1 (Zymed), IgG2a (Zymed), IgG2b (Zymed), IgG3 (BD Biosciences Pharmingen), or IgM (Jackson ImmunoResearch Laboratories Inc.) antibodies. After addition of p-nitrophenyl phosphate (Sigma), the absorbance was measured at 405 nm with wavelength correction set at 490 nm using a microplate reader (BMG Labtech). Antibody titers against the T (polio)-epitope were determined as follows. Reacti-bind NeutrAvidin coated and pre-blocked plates (Pierce) were incubated with biotin-labeled T-epitope (10 μg/mL) for 2 h. Next, serial dilutions of the sera were allowed to bind to immobilized T-epitope. Detection was accomplished as described above. The antibody titer was defined as the highest dilution yielding an optical density of 0.1 or greater over that of normal control mouse sera.
Cell culture: RAW 264.7 βNO(−) cells, derived from the RAW 264.7 mouse monocyte/macrophage cell line, were obtained from ATCC. The cells were maintained in RPMI 1640 medium with L-glutamine (2 mM), adjusted to contain sodium bicarbonate (1.5 g L−1), glucose (4.5 g L−1), HEPES (10 mM) and sodium pyruvate (1.0 mM) and supplemented with penicillin (100 u mL−1)/streptomycin (100 μg mL−1; Mediatech) and FBS (10%; Hyclone). Human breast adenocarcinoma cells (MCF7) (Horwitz, Steroids 1975, 26, 785-95), obtained from ATCC, were cultured in Eagle's minimum essential medium with L-glutamine (2 mM) and Earle's BSS, modified to contain sodium bicarbonate (1.5 g L−1), non-essential amino acids (0.1 mM) and sodium pyruvate (1 mM) and supplemented with bovine insulin (0.01 mg mL−1; Sigma) and FBS (10%). Human skin malignant melanoma cells (SK-MEL-28) were obtained from ATCC and grown in Eagle's minimum essential medium with L-glutamine (2 mM) and Earle's BSS, adjusted to contain sodium bicarbonate (1.5 g L−1), non-essential amino acids (0.1 mM) and sodium pyruvate (1 mM) and supplemented with FBS (10%). All cells were maintained in a humid 5% CO2 atmosphere at 37° C.
TNF-α and IFN-β assays. RAW 264.7 γNO(−) cells were plated on the day of the exposure assay as 2×105 cells/well in 96-well plates (Nunc) and incubated with different stimuli for 5.5 h in the presence or absence of polymyxin B. Culture supernatants were collected and stored frozen (−80° C.) until assayed for cytokine production. Concentrations of TNF-α were determined using the TNF-α DuoSet ELISA Development kit from R&D Systems. Concentrations of IFN-β were determined as follows. ELISA MaxiSorp plates were coated with rabbit polyclonal antibody against mouse IFN-β (PBL Biomedical Laboratories). IFN-β in standards and samples was allowed to bind to the immobilized antibody. Rat anti-mouse IFN-β antibody (USBiological) was then added, producing an antibody-antigen-antibody “sandwich”. Next, horseradish peroxidase (HRP) conjugated goat anti-rat IgG (H+L) antibody (Pierce) and a chromogenic substrate for HRP 3,3′,5,5′-tetramethylbenzidine (TMB; Pierce) were added. After the reaction was stopped, the absorbance was measured at 450 nm with wavelength correction set to 540 nm. Concentration-response data were analyzed using nonlinear least-squares curve fitting in Prism (GraphPad Software, Inc.). These data were fit with the following four parameter logistic equation: Y=Emax/(1+(EC50/X)Hill slope), where Y is the cytokine response, X is the concentration of the stimulus, Emax is the maximum response and EC50 is the concentration of the stimulus producing 50% stimulation. The Hill slope was set at 1 to be able to compare the EC50 values of the different inducers. All cytokine values are presented as the means ±SD of triplicate measurements, with each experiment being repeated three times.
Evaluation of materials for contamination by LPS: To ensure that any increase in cytokine production was not caused by LPS contamination of the solutions containing the various stimuli, avidly binds to the lipid A region of LPS, thereby preventing LPS-induced cytokine production (Tsubery, Biochemistry 2000, 39, 11837-44). TNF-α: and IFN-β concentrations in supernatants of cells preincubated with polymyxin B (30 μg mL−1; Bedford Laboratories) for 30 min before incubation with E. coli O55:B5 LPS for 5.5 h showed complete inhibition, whereas preincubation with polymyxin B had no effect on TNF-α synthesis by cells incubated with the synthetic compounds 21 and 23. Therefore, LPS contamination of the latter preparations was inconsequential.
Cell recognition analysis by fluorescence measurements: Serial dilutions of pre- and post-immunization sera were incubated with MCF7 and SK-MEL-28 single-cell suspensions for 30 min on ice. Next, the cells were washed and incubated with goat anti-mouse IgG γ-chain specific antibody conjugated to fluorescein isothiocyanate (FITC; Sigma) for 20 min on ice. Following three washes and cell lysis, cell lysates were analyzed for fluorescence intensity (485 ex/520 em) using a microplate reader (BMG Labtech). Data points were collected in triplicate and are representative of three separate experiments.
General methods: Fmoc-L-amino acid derivatives and resins were purchased from NovaBioChem and Applied Biosystems; peptide synthesis grade N,N-dimethylformamide (DMF) from EM Science; and N-methylpyrrolidone (NMP) from Applied Biosystems. Egg phosphatidylcholine (PC), phosphatidylglycerol (PG), cholesterol (Chol), and monophosphoryl lipid A (MPL-A) were obtained from Avanti Polar Lipids. EZ-Link® NHS-Biotin reagent (succinimidyl-6-(biotinamido)hexanoate) was obtained from Pierce. All other chemical reagents were purchased form Aldrich, Acros, Alfa Aesar, and Fisher Scientific and used without further purification. All solvents employed were reagent grade. Reversed phase high performance liquid chromatography (RP-HPLC) was performed on an Agilent 1100 series system equipped with an auto-injector, fraction-collector, and UV-detector (detecting at 214 nm) using an Agilent Zorbax Eclipse™ CS analytical column (5 μm, 4.6×150 mm) at a flow rate of 1 mL/min, Agilent Zorbax Eclipse™ CS semi preparative column (5 μm, 10×250 mm) at a flow rate of 3 mL/min or Phenomenex Jupiter™ C4 semi preparative column (5 μm, 10×250 mm) at a flow rate of 2 mL/min. All runs were performed using a linear gradient of 0-100% solvent B over 40 min (solvent A=5% acetonitrile, 0.1% trifluoroacetic acid (TFA) in water, solvent B=5% water, 0.1% TFA in acetonitrile). Matrix assisted laser desorption ionization time of flight mass spectrometry (MALDI-ToF) mass spectra were recorded on a ABI 4700 proteomic analyzer.
Synthesis of glycolipopeptide 22: The synthesis 22 was carried out on a Rink amide resin (28, 0.1 mmol) as described under peptide synthesis in the experimental. The first four amino acids, Arg-Pro-Ala-Pro were coupled on the peptide synthesizer using a standard protocol to obtain 29. After the completion of the synthesis, a manual coupling of 1S (0.2 mmol, 134 mg) was carried out. Nα-Fmoc-Thr-(AcO3-α-D-GalNAc) 1S (Cato, J. Carbohydr. Chem. 2005, 24, 503-516) was dissolved in NMP (5 mL) and O-(7-azabenzotriazol-1-yl)-N,N,N′,N′-tetramethyl-uronium hexafluorophosphate (HATU; 0.2 mmol, 76 mg), 1-hydroxy-7-azabenzotriazole (HOAt; 0.2 mmol, 27 mg), and diisopropylethylamine (DIPEA; 0.4 mmol, 70 μL) were added to the solution and the resulting mixture was added to the resin. The coupling reaction was monitored by standard Kaiser test. After 12 h, the resin was washed with NMP (6 mL) and methylene chloride (DCM; 6 mL), and resubjected to the same coupling conditions to ensure complete coupling. The glycopeptide 30 was then elongated on the peptide synthesizer. After the completion of the synthesis, the resin was thoroughly washed with NMP (6 mL), DCM (6 mL) and methanol (MeOH; 6 mL) and dried in vacuo. The resin was then swelled in DCM (5 mL) for 1 h and the rest of the couplings were carried out manually. Next, Nα-Fmoc-lipophilic amino acid (Nα-Fmoc-D,L-tetradeconic acid) 2S (Gibbons, Liebigs Ann. Chem. 1990, 1175-1183; Koppitz, Helv. Chim. Acta 1997, 80, 1280-1300) (0.3 mmol, 139 mg) dissolved in NMP (5 mL), benzotriazole-1-yl-oxy-tris-pyrrolidino-phosphonium hexafluorophosphate (PyBOP; 0.3 mmol, 156 mg), HOBt (0.3 mmol, 40 mg) and DIPEA (0.4 mmol, 67 μL) were premixed for 2 min., and then added to the resin. The coupling reaction was monitored by the Kaiser test and was complete after standing for 8 h. The Nα-Fmoc group was cleaved using piperidine (20%) in DMF (6 mL). Nα-Fmoc-Gly-OH (0.3 mmol, 90 mg) dissolved in NMP (5 mL), PyBOP (0.3 mmol, 156 mg), HOBt (0.3 mmol, 40 mg), and DIPEA (0.4 mmol, 67 μL) were premixed for 2 min, and were then added to the resin. The coupling reaction was monitored by Kaiser test and was complete after standing for 4 h. The Nα-Fmoc group was cleaved using piperidine (20%) in DMF (6 mL). One more cycle of coupling of 2S (0.3 mmol, 139 mg) was carried out as described above using PyBOP (0.3 mmol, 156 mg), HOBt (0.3 mmol, 40 mg), and DIPEA (0.4 mmol, 67 μL) in NMP (5 mL). Finally, the Nα-Fmoc group was cleaved using piperidine (20%) in DMF (6 mL) and the resulting free amino group was acetylated by treatment of the resin with Ac2O (10%) and DIPEA (5%) in NMP (5 mL) for 10 min. The resin was washed thoroughly with NMP (5 mL×2), DCM (5 mL×2), and MeOH (5 mL×2), and dried in vacuo. The resin was swelled in DCM (5 mL) for 1 h, treated with hydrazine (60%) in MeOH4,5 (10 mL) for 2 h, thoroughly washed with NMP (5 mL×2), DCM (5 mL×2), and MeOH (5 mL×2), and dried in vacuo. The resin was swelled in DCM (5 mL) for 1 h and then treated with reagent B (TFA (88%), water (5%), phenol (5%), and TIS (2%), 10 mL) for 2 h. The resin was filtered, washed with neat TFA (2 mL), and the filtrate was then concentrated in vacuo to approximately ⅓ of its original volume. The glycolipopeptide was precipitated using diethyl ether (0° C., 40 mL) and recovered by centrifugation at 3,000 rpm for 15 min. The crude glycolipopeptide was purified by RP-HPLC on a semi preparative C-4 column using a linear gradient of 0-95% solvent B in A over 40 min, and the appropriate fractions were lyophilized to afford 22 (
Synthesis of lipopeptide 23: The synthesis of 23 was carried out on a Rink amide resin (28, 0.1 mmol) as described under peptide synthesis in the experimental. After coupling of the first five amino acids, the lipid portion of the molecule was coupled manually. Nα-Fmoc-S-(2,3-bis(palmitoyloxy)-(2R-propyl)-(R)-cysteine, 3S (Metzger, Int. J. Pept. Protein Res. 1991, 38, 545-554; Roth, Bioconj. Chem. 2004, 15, 541-553) (0.3 mmol, 267 mg) was dissolved in DMF (5 mL) and PyBOP (0.3 mmol, 156 mg), HOBt (0.3 mmol, 40 mg), and DIPEA (0.4 mmol, 67 μL) were added to the solution. After 2 min the reaction mixture was added to the resin. The coupling reaction was monitored by the Kaiser test and was complete after standing for 12 h. Next, the Nα-Fmoc group was cleaved using piperidine (20%) in DMF (6 mL) to obtain 36. Palmitic acid (0.3 mmol, 77 mg) was coupled to the free amine of 36 as described above using PyBOP (0.3 mmol, 156 mg), HOBt (0.3 mmol, 40 mg), and DIPEA (0.4 mmol, 67 μL) in DMF. The resin was washed thoroughly with DMF (5 mL×2), DCM (5 mL×2), and MeOH (5 mL×2) and then dried in vacuo. The resin was swelled in DCM (5 mL) for 1 h and then treated with TFA (95%), water (2.5%), and TIS (2.5%) (10 mL) for 2 h at room temperature. The resin was filtered and washed with neat TFA (2 mL). The filtrate was then concentrated in vacuo to approximately ⅓ of its original volume. The lipopeptide was precipitated using diethyl ether (0° C.; 30 mL) and recovered by centrifugation at 3000 rpm for 15 min. The crude lipopeptide was purified by RP-HPLC on a semi preparative C-4 column using a linear gradient of 0 to 95% solvent B in solvent A over a 40 min period and the appropriate fractions were lyophilized to afford 23 (
Synthesis of glycolipopeptide 25: The synthesis 25 was carried out on a Rink amide resin (28, 0.1 mmol) as described under peptide synthesis in the experimental. The first four amino acids, Arg-Pro-Ala-Pro were coupled on the peptide synthesizer using a standard protocol to obtain 29. After the completion of the synthesis, a manual coupling was carried out using 1S (0.2 mmol, 134 mg). 1S was dissolved in NMP (5 mL) and HATU (0.2 mmol, 76 mg), HOAt (0.2 mmol, 27 mg), and DIPEA (0.4 mmol, 70 μL) were added and the resulting mixture was added to the resin. The coupling reaction was monitored by standard Kaiser test. After 12 h, the resin was washed with NMP (6 mL) and DCM (6 mL), and re-subjected to the same coupling conditions to ensure complete coupling. Glycopeptide 30 was then elongated on the peptide synthesizer. After the completion of the synthesis, the resin was thoroughly washed with NMP (6 mL), DCM (6 mL), and MeOH (6 mL) and dried in vacuo. The resin was then swelled in DCM (5 mL) for 1 h and the rest of the peptide sequence was completed manually. 2S (0.3 mmol, 139 mg) was dissolved in NMP (5 mL) and PyBOP (0.3 mmol, 156 mg), HOBt (0.3 mmol, 40 mg), and DIPEA (0.4 mmol, 67 μL) were added to the solution. After 2 min, the mixture was added to the resin. The coupling reaction was monitored by standard Kaiser test and was complete after standing for 8 h. Next, the Nα-Fmoc group was cleaved using piperidine (20%) in DMF (6 mL). Nα-Fmoc-L-glycine (0.3 mmol, 90 mg) was dissolved in NMP (5 mL) and premixed with PyBOP (0.3 mmol, 156 mg), HOBt (0.3 mmol, 40 mg), and DIPEA (0.4 mmol, 67 μL) for 2 min before the reaction mixture was added to the resin. The coupling reaction was monitored by Kaiser test and was complete after standing for 4 h. The Nα-Fmoc group was cleaved using piperidine (20%) in DMF (6 mL). One more cycle of coupling of 2S (0.3 mmol, 139 mg) was carried out as described above using PyBOP (0.3 mmol, 156 mg), HOBt (0.3 mmol, 40 mg), and DIPEA (0.4 mmol, 67 μL) in NMP (5 mL). Finally, the N-Fmoc group was cleaved using piperidine (20%) in DMF (6 mL) and the resulting free amino group was acetylated using Ac2O (10%) and DIPEA (5%) in NMP (5 mL) for 10 min. The resin was washed thoroughly with NMP (5 mL×2), DCM (5 mL×2), and MeOH (5 mL×2), and dried in vacuo. The resin was swelled in DCM (5 mL) for 1 h, treated with hydrazine (60%) in MeOH (10 mL) for 2 h, washed thoroughly with NMP (5 mL×2), DCM (5 mL×2) and MeOH (5 mL×2) and dried in vacuo. The resin was swelled in DCM (5 mL) for 1 h after which it was treated with reagent B (TFA (88%), water (5%), phenol (5%), and TIS (2%), 10 mL) for 2 h. The resin was filtered, washed with neat TFA (2 mL) and the filtrate was then concentrated in vacuo to approximately ⅓ of its original volume. The glycolipopeptide was precipitated using diethyl ether (0° C.; 40 mL) and recovered by centrifugation at 3,000 rpm for 15 min. The crude glycolipopeptide was purified by RP-HPLC on a semi preparative C-4 column using a linear gradient of 0-95% solvent B in A over 40 min, and the appropriate fractions were lyophilized to afford 5 (
Synthesis of lipopeptide 26: The synthesis of 26 was carried out on a Rink amide resin (28, 0.1 mmol). After the assembly of the peptide by using standard SPPS, the lipid portion of the molecule was coupled manually. 3S (0.3 mmol, 267 mg) was dissolved in DMF (5 mL) and PyBOP (0.3 mmol, 156 mg), HOBt (0.3 mmol, 40 mg), and DIPEA (0.4 mmol, 67 μL) were added to the solution. After activation of 3S for 2 min the reaction mixture was added to the resin. The coupling reaction was monitored by the Kaiser test and was complete after standing for 12 h. The N-Fmoc group was cleaved using piperidine (20%) in DMF (6 mL) to obtain 43. Palmitic acid (77 mg, 0.3 mmol) was coupled to the free amine of 43 as described above using PyBOP (0.3 mmol, 156 mg,), HOBt (0.3 mmol, 40 mg), and DIPEA (0.4 mmol, 67 μL) in DMF. The resin was washed thoroughly with DMF (5 mL×2), DCM (5 mL×2), and MeOH (5 mL×2) and then dried in vacuo. The resin was swelled in DCM (5 mL) for 1 h, treated with reagent B (TFA (88%), water (5%), phenol (5%), and TIS (2%), 10 mL) for 2 h, filtered and washed with neat TFA (2 mL). The filtrate was then concentrated in vacuo to approximately ⅓ of its original volume, and the lipopeptide was precipitated using diethyl ether (0° C.; 30 mL) and recovered by centrifugation at 3000 rpm for 15 min. The crude lipopeptide was purified by RP-HPLC on a semi preparative C-4 column using a linear gradient of 0-95% solvent B in A over a 40 min., and the appropriate fractions were lyophilized to afford 26 (
Synthesis of biotin-T-epitope peptide 27: The synthesis of 27 was carried out on a Rink amide resin (28, 0.1 mmol) as described in the general method. After the completion of synthesis the resin was washed thoroughly with DMF (5 mL×2), DCM (5 mL×2), and MeOH (5 mL×2) and then dried in vacuo. The resin was swelled in DCM (5 mL) for 1 h. Next, a mixture of EZ-Link® NHS-Biotin reagent (succinimidyl-6-(biotinamido)hexanoate) (0.2 mmol, 90 mg) and DIPEA (0.2 mmol, 36 μL) in DMF (5 mL) was added to the resin. The coupling was monitored by standard Kaiser test and was complete within 8 h. The resin was washed thoroughly with DMF (5 mL×2), DCM (5 mL×2), and MeOH (5 mL×2) and then dried in vacuo. The resin was swelled in DCM (5 mL) for 1 h and treated with reagent B (TFA (88%), water (5%), phenol (5%), and TIS (2%), 15 mL) for 2 h at room temperature. The resin was filtered and washed with neat TFA (2 mL). The filtrate was concentrated in vacuo to approximately ⅓ of its original volume. The peptide was precipitated using diethyl ether (0° C.; 30 mL) and recovered by centrifugation at 3,000 rpm for 15 min. The crude peptide was purified by RP-HPLC on a semi preparative C-8 column using a linear gradient of 0 to 95% solvent B in solvent A over a 40 min period and the appropriate fractions were lyophilized to afford 27 (
MS: observed [M+], 1951.2966 Da; calculated [M+], 1951.3768 Da.
Glycoconjugates are the most functionally and structurally diverse molecules in nature and it is now well established that protein- and lipid-bound saccharides play essential roles in many molecular processes impacting eukaryotic biology and disease. Examples of such processes include fertilization, embryogenesis, neuronal development, hormone activities, the proliferation of cells and their organization into specific tissues. Remarkable changes in the cell-surface carbohydrates occur with tumor progression, which appears to be intimately associated with metastasis. Furthermore, carbohydrates are capable of inducing a protective antibody response and this immunological reaction is a major contributor to the survival of the organism during infection.
The inability of saccharides to activate helper T-lymphocytes has complicated their development as vaccines. For most immunogens, including carbohydrates, antibody production depends on the cooperative interaction of two types of lymphocytes, the B-cells and helper T-cells (Jennings, Neoglyconjugates: Preparation and Applications 325-371 (Academic Press, Inc., 1994); Kuberan, Curr. Org. Chem. 2000, 4, 653-677). Saccharides alone cannot activate helper T-cells and therefore have a limited immunogenicity as manifested by low affinity IgM antibodies and the absence of IgG antibodies. In order to overcome the T-cell independent properties of carbohydrates, past research has focused on the conjugation of saccharides to a foreign carrier protein (e.g. Keyhole Limpet Hemocyanin (KLH) detoxified tetanus toxoid) (Jennings, Neoglyconjugates: Preparation and Applications 325-371 (Academic Press, Inc., 1994); Kuberan, Curr. Org. Chem. 2000, 4, 653-677; Jones, An. Acad. Bras. Cienc. 2005, 77, 293-324). In this approach, the carrier protein enhances the presentation of the carbohydrate to the immune system and provides T-epitopes (peptide fragments of 12-15 amino acids) that can activate T-helper cells. As a result, a class switch from low affinity IgM to high affinity IgG antibodies is accomplished. This approach has been successfully applied for the development of a conjugate vaccine to prevent infections with Haemophilus influenzae.
Carbohydrate-protein conjugate candidate vaccines composed of more demanding carbohydrate antigens, such as tumor associated carbohydrate and glycopeptides, have failed to elicit high titers of IgG antibodies. These results are not surprising because tumor-associated saccharides are of low antigenicity, because they are self-antigens and consequently tolerated by the immune system. The shedding of antigens by the growing tumor reinforces this tolerance. In addition, foreign carrier proteins such as KLH and BSA and the linker that attach the saccharides to the carrier protein can elicit strong B-cell responses, which may lead to the suppression of antibody responses against the carbohydrate epitope (Buskas, Chem. Eur. J. 2004, 10, 3517-3524; Ni, Bioconjug. Chem. 2006, 17, 493-500). It is clear that the successful development of carbohydrate-based cancer vaccines requires novel strategies for the more efficient presentation of tumor-associated carbohydrate epitopes to the immune system, resulting in a more efficient class switch to IgG antibodies (Reichel, Chem. Commun. 1997, 21, 2087-2088; Alexander, J. Immunol. 2000, 164, 1625-1633; Kudryashov, Proc. Natl. Acad. Sci. U.S.A. 2001, 98, 3264-3269; Lo-Man, J. Immunol. 2001, 166, 2849-2854; Jiang, Curr. Med. Chem. 2003, 10, 1423-1439; Jackson, Proc. Natl. Acad. Sci. U.S.A. 2004, 101, 15440-5; Lo-Man, Cancer Res. 2004, 64, 4987-4994; Buskas, Angew. Chem. Int. Ed. 2005, 44, 5985-5988 (Example I); Dziadek, Angew. Chem. Int. Ed. 2005, 44, 7624-7630; Krikorian, Bioconjug. Chem. 2005, 16, 812-819; Pan, J. Med. Chem. 2005, 48, 875-883).
We have found that a three-component vaccine composed of a TLR2 agonist, a promiscuous peptide T-helper epitope and a tumor-associated glycopeptide, can elicit in mice exceptionally high titers of IgG antibodies that can recognize cancer cells expressing the tumor-associated carbohydrate (see compound 21,
We expect that the three-component immunogen technology of the invention can be used to generate monoclonal antibodies (MAbs) for poorly antigenic carbohydrates and glycopeptides. We have initially focused on MAbs against β-N-acetylglucosamine (β-O-GlcNAc) modified peptides (Wells, Science 2001, 291, 2376-2378; Whelan, Methods Enzymol. 2006, 415, 113-133; Zachara, Biochim. Biophys. Acta, 2006, 1761, 599-617; Dias and Hart, Mol. Biosyst. 2007, 3, 766-772; Hart, Nature 2007, 446, 1017-1022; Lefebvre, Exp. Rev. Proteomics 2005, 2, 265-275). Myriad nuclear and cytoplasmic proteins in metazoans are modified on Ser and Thr residues by the monosaccharide β-O-GlcNAc. The rapid and dynamic change in O-GlcNAc levels in response to extracellular stimuli suggests a key role for O-GlcNAc in signal transduction pathways. Modulation of O-GlcNAc levels has profound effects on the functioning of cells, in part mediated through a complex interplay between O-GlcNAc and O-phosphate. Recently, O-GlcNAc has been implicated in the etiology of type II diabetes, the regulation of stress response pathways and in the regulation of the proteasome. Progress in this exciting field of research is seriously hampered by the lack of reagents such as appropriate MAbs. In this respect, only one poorly performing IgM MAb with relative broad specificity (Comer, Anal. Biochem. 2001, 293, 169-177) is commercially available (Covance Research Products Inc).
We have designed and synthesized compound 52 (
Anti-glycopeptide antibody titers were determined by coating microtiter plates with CGSTPVS(β-O-GlcNAc)SANM conjugated to maleimide (MI) modified BSA and detection was accomplished with anti-mouse IgG antibodies labeled with alkaline phosphatase. As can be seen in Table 6, compounds 52 and 53 elicited excellent titers of anti-MUC1 IgG antibodies. Furthermore, no significant difference in titer was observed between the O- and S-linked saccharide derivatives.
aAnti-GSTPVS(β-O-GlcNAc)SANM antibody titers are presented as the mean of groups of five mice. ELISA plates were coated with BSA-MI-GSTPVS(β-O-GlcNAc)SANM conjugate and titers were determined by linear regression analysis, plotting dilution vs. absorbance. Titers are defined as the highest dilution yielding an optical density of 0.1 or greater over that of normal control mouse sera.
bLiposomal preparations were employed.
cO-GlcNAc 52; Pam3CysSK4G-C-KLFAVWKITYKDT-G-GSTPVS(β-O-GluNAc)SANM.
dS-GlcNAc 53; Pam3CysSK4G-C-KLFAVWKITYKDT-G-GSTPVS(β-S-GluNAc)SANM.
Next, spleens of two mice immunized with the O-linked glycolipopeptide 52 were harvested and standard hybridoma culture technology gave seven IgG1, seven IgG2a, two IgG2b and fourteen IgG3 producing hybridoma cell lines (Table 7). The ligand specificity of the resulting MAbs was investigated using ELISA and inhibition ELISA. All MAbs recognized CGSTPVS(β-O-GlcNAc)SANM linked to BSA whereas only a small number recognized the peptide CGSTPVSSANM (SEQ ID NO:12) conjugated to BSA. Furthermore, the interaction of nineteen MAbs with BSA-MI-CGSTPVS(β-O-GlcNAc)SANM could be inhibited with the glycopeptide GSTPVS(β-O-GlcNAc)SANM.
aELISA plates were coated with BSA-MI-CGSTPVS(β-O-GlcNAc)SANM conjugate and supernatants of the different cell lines were screened undiluted.
bELISA plates were coated with BSA-MI-CGSTPVS(β-O-GlcNAc)SANM conjugate and titers were determined by linear regression analysis, plotting dilution vs. absorbance. Titers are defined as the highest dilution yielding an optical density of 0.1 or greater over that of normal control mouse sera.
cELISA plates were coated with BSA-MI-CGSTPVS(β-O-GlcNAc)SANM conjugate and inhibition by GSTPVS(β-O-GlcNAc)SANM was determined: −, +, ++ and +++ indicate no inhibition, weak inhibition, inhibition approximately 50% at 500 μM and complete inhibition at 500 μM, respectively.
dELISA plates were coated with BSA-MI-CGSTPVSSANM conjugate and supernatants of the different cell lines were screened undiluted.
eNA indicates not analyzed.
Hybridoma cell lines 1F5.D6, 9D1.E4 and 18B10.C7 were deposited with the American Type Culture Collection (ATCC), 10801 University Blvd., Manassas, Va., 20110-2209, USA, on Jul. 1, 2008, and assigned ATCC deposit numbers ATCC ______, ATCC ______ and ATCC ______, respectively. It is nonetheless to be understood that the written description herein is considered sufficient to enable one skilled in the art to fully practice the present invention. Moreover, the deposited embodiment is intended as a single illustration of one aspect of the invention and is not to be construed as limiting the scope of the claims in any way.
Four hybridomas (18B 10.C7(3), 5H11.H6(4), 9D1.E4(10), 1F5.D6(14)) were cultured at a one-liter scale and the resulting antibodies purified by saturated ammonium sulfate precipitation followed by Protein G column chromatography to yield, in each case, approximately 10 mg of IgG. The selectivity of the MAbs was investigated by inhibition ELISA using microtiter plates coated with BSA-MI-CGSTPVS(β-O-GlcNAc)SANM and glycopeptide, peptide and β-O-GlcNAc-Ser as inhibitors. As can be seen in
Although CKII is an abundant protein, only a small portion is glycosylated with O-GlcNAc. Therefore, HEK293 cells were transfected with O-GlcNAc-transferase (OGT, enzyme that adds O-GlcNAc) and cell lysates analyzed by Western blotting using the four MAbs as primary antibody and anti-mouse IgG labeled with HRP as secondary antibody and the results were compared with mock-transfected HEK293 cells. Furthermore, CKII was immuno-precipitated with a rabbit polyclonal CKII alpha antibody followed by analysis by Western blotting using the four MAbs (
Large-scale immunoprecipitation (IP) was performed using monoclonal IgG antibodies Mab3, Mab10, and Mab14 produced by hybridomas 18B 10.C7, 9D1.E4, and 1F5.D6, respectively, as well as the commercially available monoclonal IgM antibody CTD110.6 that was isolated from HEK29T cells treated with PUGNAc (Covance Research Products, Inc.). The establishment of the hybridomas and characterization of the antibodies derived therefrom are described in Example VIII. Following Lys-C digestion, samples were subjected to electron spray ionization (ESI) mass spectrometry (Collision induced dissociation (CID)-pseudo neutral loss) analysis. Results were filtered at 1% false recovery rate and proteins that appeared in mock IP control experiments were subtracted from the final list (
The complete disclosure of all patents, patent applications, and publications, and electronically available material (including, for example, nucleotide sequence submissions in, e.g., GenBank and RefSeq, and amino acid sequence submissions in, e.g., SwissProt, PIR, PRF, PDB, and translations from annotated coding regions in GenBank and RefSeq) cited herein are incorporated by reference. The foregoing description and examples have been given for clarity of understanding only. No unnecessary limitations are to be understood therefrom. The invention is not limited to the exact details shown and described, for variations obvious to one skilled in the art will be included within the invention defined by the claims.
This application claims the benefit of U.S. Provisional Application Ser. No. 61/127,710, filed May 15, 2008, and is also a continuation-in-part of International Application PCT/US2007/000158, with an international filing date of Jan. 3, 2007, which in turn claims the benefit of U.S. Provisional Application Ser. Nos. 60/755,881, filed Jan. 3, 2006; 60/796,769, filed May 2, 2006; and 60/809,272, filed May 30, 2006; each of which is incorporated herein by reference in its entirety.
This invention was made with government support under a grant from the National Cancer Institute of the National Institute of Health (Grant No RO1 CA88986). The U.S. Government has certain rights in this invention.
| Number | Date | Country | |
|---|---|---|---|
| 61127710 | May 2008 | US | |
| 60755881 | Jan 2006 | US | |
| 60796769 | May 2006 | US | |
| 60809272 | May 2006 | US |
| Number | Date | Country | |
|---|---|---|---|
| Parent | PCT/US2007/000158 | Jan 2007 | US |
| Child | 12217376 | US |
