ISOLATED NUCLEOTIDE SEQUENCES ASSOCIATED WITH MULTIPLE SCLEROSIS OR RHEUMATOID ARTHRITIS AND A PROCESS OF DETECTING

[0002] Multiple sclerosis (MS) is a demyelinating disease of the central nervous system (CNS), the cause of which remains as yet unknown.

[0003] “Multiple sclerosis (MS) is the most common neurological disease of young adults with a prevalence in Europe and North America of between 20 and 200 per 100,000. It is characterized clinically by a relapsing/remitting or chronic progressive course, frequently leading to severe disability. Current knowledge suggests that MS is associated with autoimmunity, that genetic background has an important influence and that “infectious” agent(s) may be involved. Indeed, many viruses have been proposed as possible candidates but as yet, none of them has been shown to play an aetiological role.

[0004] Many studies have supported the hypothesis of a viral aetiology of the disease, but none of the known viruses tested has proved to be the causal agent sought: a review of the viruses sought for several years in MS has been compiled by E. Norrby (1) and R. T. Johnson (2).

[0005] The discovery of pathogenic retroviruses in man (HTLVs and HIVs) was followed by great interest in their ability to impair the immune system and to provoke central nervous system inflammation and/or degeneration. In the case of HTLV-1, its association with a chronic inflammatory demyelinating disease in man (48) led to extensive investigations to search for an HTLV1-like retrovirus in MS patients. However, despite initial claims, the presence of HTLV-1 or HTLV-like retroviruses was not confirmed.

[0006] Recently, a retrovirus different from the known human retroviruses has been isolated in patients suffering from MS (3, 4, and 5).

[0007] In 1989, the authors described the production of extracellular virions, associated with reverse transcriptase (RT) activity, by a culture of leptomeningeal cells (LM7) obtained from the cerebrospinal fluid of a patient with MS (3). This was followed by similar findings in monocyte cultures from a series of MS patients (5). Neither viral particles nor viral RT-activity were found in control individuals. Furthermore, the authors were able to transfer the LM7 virus to non-infected leptomeningeal cells in vitro (26). The molecular characterization of the “LM7” retrovirus was a prerequisite for further evaluation of its possible role in MS. Considerable difficulties arose from the absence of continuously productive retroviral cultures and from the low levels of expression in the few transient cultures. The strategy described here focused on RNA from extracellular virions, in order to avoid non-specific detection of cellular RNA and of endogenous elements from contaminating hluman DNA. A specific retroviral sequence associated with virions produced by cell cultures from several MS patients has been identified. The entire sequence of this novel retroviral genome is currently being obtained using RT-PCR on RNA from exitracellular virions. The retrovirus previously called “LM7 virus” corresponds to an oncovirus and is now designated MSRV (Multiple Sclerosis-associated RetroVirus).

[0008] The authors were also able to show that this retrovirus could be transmitted in vitro, that patients suffering from MS produced antibodies capable of recognizing proteins associated with the infection of leptomeningeal cells by this retrovirus, and that the expression of the latter could be strongly stimulated by the immediate-early genes of some herpesviruses (6).

[0009] All these results point to the role in MS of at least one unknown retrovirus or of a virus having reverse transcriptase activity which is detectable according to the method published by H. Perron (3) and qualified as “LM7-like RT” activity. The content of the publication identified by (3) is incorporated in the present description by reference.

[0010] Recently, the Applicant's studies have enabled two continuous cell lines infected with natural isolates originating from two different patients suffering from MS to be obtained by a culture method as described in the document WO-A-93/20188, the content of which is incorporated in the present description by reference. These two lines, derived from human choroid plexus cells, designated LM7PC and PLI-2, were deposited with the ECACC on Jul. 22, 1992 and Jan. 8, 1993, respectively, under numbers 92072201 and 93010817, in accordance with the provisions of the Budapest Treaty. Moreover, the viral isolates possessing LM7-like RT activity were also deposited with the ECACC under the overall designation of “strains”. The “strain” or isolate harboured by the PLI-2 line, designated POL-2, was deposited with the ECACC on Jul. 22, 1992 under No. V92072202. The “strain” or isolate harboured by the LM7PC line, designated MS7PG, was deposited with the ECACC on Jan. 8, 1993 under No. V93010816.

[0011] Starting from the cultures and isolates mentioned above, characterized by biological and morphological criteria, the next step was to endeavour to characterize the nucleic acid material associated with the viral particles produced in these cultures.

[0012] The portions of the genome which have already been characterized have been used to develop tests for molecular detection of the viral genome and immunoserological tests, using the amino acid sequences encoded by the nucleotide sequences of the viral genome, in order to detect the immune response directed against epitopes associated with the infection and/or viral expression.

[0013] These tools have already enabled an association to be confirmed between MS and the expression of the sequences identified in the patents cited later. However, the viral system discovered by the Applicant is related to a complex retroviral system. In effect, the sequences to be found encapsidated in the extracellular viral particles produced by the different cultures of cells of patients suffering from MS show clearly that there is coencapsidation of retroviral genomes which are related but different from the “wild-type” retroviral genome which produces the infective viral particles. This phenomenon has been observed between replicative retroviruses and endogenous retroviruses belonging to the same family, or even heterologous retroviruses. The notion of endogenous retroviruses is very important in the context of our discovery since, in the case of MSRV-1, it has been observed that endogenous retroviral sequences comprising sequences homologous to the MSRV-1 genome exist in normal human DNA. The existence of endogenous retroviral elements (ERV) related to MSRV-1 by all or part of their genome explains the fact that the expression of the MSRV-1 retrovirus in human cells is able to interact with closely related endogenous sequences. These interactions are to be found in the case of pathogenic and/or infectious endogenous retroviruses (for example some ecotropic strains of the murine leukaemia virus), and in the case of exogenous retroviruses whose nucleotide sequence may be found partially or wholly, in the form of ERVs, in the host animal's genome (e.g. mouse exogenous mammary tumor virus transmitted via the milk). These interactions consist mainly of (i) a trans-activation or coactivation of ERVs by the replicative retrovirus (ii) and “illegitimate” encapsidation of RNAs related to ERVS, or of ERVs—or even of cellular RNAs—simply possessing compatible encapsidation sequences, in the retroviral particles produced by the expression of the replicative strain, which are sometimes transmissible and sometimes with a pathogenicity of their own, and (iii) more or less substantial recombinations between the coencapsidated genomes, in particular in the phases of reverse transcription, which lead to the formation of hybrid genomes, which are sometimes transmissible and sometimes with a pathogenicity of their own.

[0014] Thus, (i) different sequences related to MSRV-1 have been found in the purified viral particles; (ii) molecular analysis of the different regions of the MSRV-1 retroviral genome should be carried out by systematically analyzing the coencapsidated, interfering and/or recombined sequences which are generated by the infection and/or expression of MSRV-1; furthermore, some clones may have defective sequence portions produced by the retroviral replication and template errors and/or errors of transcription of the reverse treascriptase; (iii) the families of sequences related to the same retroviral genomic region provide the means for an overall diagnostic detection which may be optimized by the identification of invariable regions among the clones expressed, and by the identification of reading frames responsible for the production of antigenic and/or pathogenic polypeptides which may be produced only by a portion, or even by just one, of the clones expressed, and, under these conditions, the systematic analysis of the clones expressed in the region of a given gene enables the frequency of variation and/or of recombination of the MSRV-1 genome in this region to be evaluated and the optimal sequences for the applications, in particular diagnostic applications, to be defined; (iv) the pathology caused by a retrovirus such as MSRV-1 may be a direct effect of its expression and of the proteins or peptides produced as a result thereof, but also an effect of the activation, the encapsidation or the recombination of related or heterologous genomes and of the proteins or peptides produced as a result thereof; thus, these genomes associated with the expression of and/or infection by MSRV-1 are an integral part of the potential pathogenicity of this virus, and hence constitute means of diagnostic detection and special therapeutic targets. Similarly, any agent associated with or cofactor of these interactions responsible for the pathogenesis in question, such as MSRV-2 or the gliotoxic factor which are described in the patent application published under No. FR7-2,716,198, may participate in the development of an overall and very effective strategy for the diagnosis, prognosis, therapeutic monitoring and/or integrated therapy of MS in particular, but also of any other disease associated with the same agents.

[0015] In this context, a parallel discovery has been made in another autoimmune disease, rheumatoid arthritis (RA), which has been described in the French Patent Application filed under No. 95/02960. This discovery shows that, by applying methodological approaches similar to the ones which were used in the Applicant's work on MS, it was possible to identify a retrovirus expressed in RA which shares the sequences described for MSRV-1 in MS, and also the coexistence of an associated MSRV-2 sequence also described in MS. As regards MSRV-1, the sequences detected in common in MS and RA relate to the pol and gag genes. In the current state of knowledge, it is possible to associate the gag and pol sequences described with the MSRV-1 strains expressed in these two diseases.

[0016] The present patent application relates to various results which are additional to those already protected by the following French Patent Applications:

[0017] No. 92/04322 of Apr. 3, 1992, published under U.S. Pat. No. 2,689,519;

[0018] No. 92/13447 of Nov. 3, 1992, published under U.S. Pat. No. 2,689,521;

[0019] No. 92/13443 of Nov. 3, 1992, published under U.S. Pat. No. 2,689,520;

[0020] No. 94/01529 of Feb. 4, 1994, published under U.S. Pat. No. 2,715,936;

[0021] No. 94/01531 of Feb. 4, 1994, published under U.S. Pat. No. 2,715,939;

[0022] No. 94/01530 of Feb. 4, 1994, published under U.S. Pat. No.2,715,936;

[0023] No. 94/01532 of Feb. 4, 1994, published under U.S. Pat. No. 2,715,937;

[0024] No. 94/14322 of Nov. 24, 1994, published under U.S. Pat. No. 2,727,428;

[0025] and No. 94/15810 of Dec. 23, 1994; published under U.S. Pat. No. 2,728,585.

SUMMARY OF THE INVENTION

[0026] The present invention relates, in the first place, to a viral material, in the isolated or purified state, which may be recognized or characterized in different ways:

[0027] its genome comprises a nucleotide sequence chosen from the group including the sequences SEQ ID NO:46, SEQ ID NO:51, SEQ ID NO:52, SEQ ID NO:53, SEQ ID NO:56, SEQ ID NO:58, SEQ ID NO:59, SEQ ID NO:60, SEQ ID NO:61, SEQ ID NO:89, their complementary sequences and their equivalent sequences, in particular nucleotide sequences displaying, for any succession of 100 contiguous monomers, at least 50% and preferably at least 70% homology with the said sequences SEQ ID NO:46, SEQ ID NO:51, SEQ ID NO:52, SEQ ID NO:53, SEQ ID NO:56, SEQ ID NO:58, SEQ ID NO:59, SEQ ID NO:60 SEQ ID NO:61, SEQ ID NO:89, respectively, and their complementary sequences;

[0028] the region of its genome comprising the env and pol genes and a portion of the gag gene, excluding the subregion having a sequence identical or equivalent to SEQ ID NO:1, codes for any polypeptide displaying, for any contiguous succession of at least 30 amino acids, at least 50% and preferably at least 70% homology with a peptide sequence encoded by any nucleotide sequence chosen from the group including SEQ ID NO:46, SEQ ID NO:51, SEQ ID NO:52, SEQ ID NO:53, SEQ ID NO:56, SEQ ID NO:58, SEQ ID NO:59, SEQ ID NO:60 SEQ ID NO:61 SEQ ID NO:89 and their complementary sequences;

[0029] the pol gene comprises a nucleotide sequence partially or totally identical or equivalent to SEQ ID NO:57 or SEQ ID NO:93, excluding SEQ ID NO:1.

[0030] the gag gene comprises a nucleotide sequence partially or totally identical or equivalent to SEQ ID NO:88.

[0031] As indicated above, according to the present invention, the viral material as defined above is associated with MS. And as defined by reference to the pol or gag gene of MSRV-1, and more especially to the sequences SEQ ID NOS 51, 56, 57, 59, 60, 61, 88, 89, 93, 169, 170, 171, 172, 176, 177, 178 and 179, this viral material is associated with RA.

[0032] The present invention also relates to a nucleic material, in the isolated or purified state, having at least one of the following definitions:

[0033] a nucleic material comprising a nucleotide sequence selected from the group including sequences SEQ ID NO:93, SEQ ID NO:94, SEQ ID NO:169, SEQ ID NO:170, SEQ ID NO:171, SEQ ID NO:172, SEQ ID NO:176, SEQ ID NO:177, SEQ ID NO:178, SEQ ID NO:179, their complementary sequences and their equivalent sequences, in particular nucleotide sequences displaying, for any succession of 100 contiguous monomers, at least 50% and preferably at least 60% homology with said sequences SEQ IDNO:93, SEQ ID NO:94, SEQ ID NO:169, SEQ ID NO:170, SEQ ID NO:171, SEQ ID NO:172, SEQ ID NO:176, SEQ ID NO:177, SEQ ID NO:178, SEQ ID NO:179, and their complementary sequences, excluding HSERV-9 (or ERV-9); advantageously, the nucleotide sequence of said nucleic material is selected from the group including sequences SEQ ID NO:93, SEQ ID NO:94, SEQ ID NO:169, SEQ ID NO:170, SEQ ID NO:171, SEQ ID NO:172, SEQ ID NO:176, SEQ ID NO:177, SEQ ID NO:178, SEQ ID NO:179, their complementary sequences and their equivalent sequences, in particular nucleotide sequences displaying, for any succession of 100 contiguous monomers, at least 70% and preferably at least 80% homology with said sequences SEQ ID NO:93,SEQ ID NO:94,SEQ ID NO:169,SEQ ID NO:170,SEQ ID NO:171, SEQ ID NO:172, SEQ ID NO:176, SEQ ID NO:177, SEQ ID NO:178, SEQ ID NO: 179, and their complementary sequences

[0034] a nucleic material, in the isolated or purified state, coding for any polypeptide displaying, for any contiguous succession of at least 30 amino acids, at least 50%, preferably at least 60%, and most preferably at least 70% homology with a peptide sequence encoded by any nucleotide sequence selected from the group including SEQ ID NO:93, SEQ ID NO:94, SEQ ID NO:169, SEQ ID NO:170, SEQ ID NO:171, SEQ ID NO:172, SEQ ID NO:176, SEQ ID NO:177, SEQ ID NO:178, SEQ ID NO: 179 and their complementary sequences;

[0035] a nucleic ma i terial, in the isolated or purified state, of retroviral type, comprising a nucleotide sequence identical or similar to at least part of the pol gene of an isolated retrovirus associated with multiple sclerosis or rheumatoid arthritis; advantageously, said nucleotide sequence is 80% similar to said at least part of the gene pol;

[0036] a nucleic material comprising a nucleotide sequence identical or similar to at least part of the pol gen of an isolated virus encoding a reverse transcriptase having a enzymatic site comprised between the amino acid domains LPQG-YXDD, having a phylogenic distance with HSERV-9 of 0.063±0.1, and preferably 0.063±0.05; the phylogenic distances are calculated on the basis of a reference sequence according to UPGM tree option of the Geneworks™ Software (INTELLIGENETICS); By enzymatic site, we understand the amino acids domain(s) conferring the specific activity of a given enzyme.

[0037] The present invention also relates to different nucleotide fragments each comprising a nucleotide sequence chosen from the group including:

[0038] (a) all the genomic sequences, partial and total, of the pol gene of the MSRV-1 virus, except for the total sequence of the nucleotide fragment defined by SEQ ID NO:1;

[0039] (b) all the genomic sequences, partial and total, of the env gene of MSRV-1;

[0040] (c) all the partial genomic sequences of the gag gene of MSRV-1;

[0041] (d) all the genomic sequences overlapping the pol gene and the env gene of the MSRV-1 virus, and overlapping the pol gene and the gag gene;

[0042] (e) all the sequences, partial and total, of a clone chosen from the group including the clones FBd3 (SEQ ID NO:46), t pol (SEQ ID NO:51), JLBc1 (SEQ ID NO:52), JLBc2 (SEQ ID NO:53) and GM3 (SEQ ID NO:56), FBd13 (SEQ ID NO:58), LB19 (SEQ ID NO:59), LTRGAG12 (SEQ ID NO:60), FP6 (SEQ ID NO:61), G+E+A (SEQ ID NO:89), excluding any nucleotide sequence identical to or lying within the sequence defined by SEQ ID NO:1;

[0043] (f) sequences complementary to the said genomic sequences;

[0044] (g) sequences equivalent to the said sequences (a) to (e), in particular nucleotide sequences displaying, for any succession of 100 contiguous monomers, at least 50% and preferably at least 70% homology with the said sequences (a) to (d), provided that this nucleotide fragment does not comprise or consist of the sequence ERV-9 as described in LA MANTIA et al. (18).

[0045] The term genomic sequences, partial or total, includes all sequences associated by coencapsidation or by coexpression, or recombined sequences.

[0046] Preferably, such a fragment comprises:

[0047] either a nucleotide sequence identical to a partial or total genomic sequence of the pol gene of the MSRV-1 virus, except for the total sequence of the nucleotide fragment defined by SEQ ID NO:1, or identical to any sequence equivalent to the said partial or total genomic sequence, in particular one which is homologous to the latter;

[0048] or a nucleotide sequence identical to a partial or total genomic sequence of the env gene of the MSRV-1 virus, or identical to any sequence complementary to the said nucleotide sequence, or identical to any sequence equivalent to the said nucleotide sequence, in particular one which is homologous to the latter.

[0049] In particular, the invention relates to a nucleotide fragment comprising a coding nucleotide sequence which is partially or totally identical to a nucleotide sequence chosen from the group including:

[0050] the nucleotide sequence defined by SEQ ID NO:40, SEQ ID NO:62 or SEQ ID NO:89;

[0051] sequences complementary to SEQ ID NO:40, SEQ ID NO:62 or SEQ ID NO:89;

[0052] sequences equivalent, and in particular homologous to SEQ ID NO:40, SEQ ID NO:62 or SEQ ID NO:89;

[0053] sequences coding for all or part of the peptide sequence defined by SEQ ID NO:39, SEQ ID NO:63 or SEQ ID NO:90;

[0054] sequences coding for all or part of a peptide sequence equivalent, in particular homologous to SEQ ID NO:39, SEQ ID NO:63 or SEQ ID NO:90, which is capable of being recognized by sera of patients infected with the MSRV-1 virus, or in whom the MSRV-1 virus has been reactivated.

[0055] The invention also relates to a nucleotide fragment (called fragment I) having at least one of the following definitions:

[0056] a nucleotide fragment comprising a nucleotide sequence selected from the group including SEQ ID NO:93, SEQ ID NO:94, SEQ ID NO:169, SEQ ID NO:170, SEQ ID NO:171, SEQ ID NO:172, SEQ ID NO:176, SEQ ID NO:177, SEQ ID NO: 178, SEQ ID NO:179, their complementary sequences, and their equivalent sequences, in particular nucleotide sequences displaying, for any succession of 100 contiguous monomers, at least 50% and preferably at least 60% homology with said sequences and their complementary sequences, said group excluding SEQ ID NO:1, said nucleotide fragment not comprising nor consisting of the sequence HSERV-9 (or ERV-9); preferably the nucleotide sequence of said fragment is selected from the group including SEQ ID NO:93, SEQ ID NO:94, SEQ ID NO:169, SEQ ID NO:170, SEQ ID NO:171, SEQ ID NO:172, SEQ ID NO:176, SEQ ID NO:177, SEQ ID NO:178, SEQ ID NO:179, their complementary sequences, and their equivalent sequences, in particular nucleotide sequences displaying, for any succession of 100 contiguous monomers, at least 70% and preferably at least 80% homology with said sequences and their complementary sequences;

[0057] a nucleotide fragment comprising a coding nucleotide sequence which is partially or totally identical to a nucleotide sequence selected from the group including

[0058] SEQ ID NO:93, SEQ ID NO:94, SEQ ID NO:169, SEQ ID NO:170, SEQ ID NO:171, SEQ ID NO:172, SEQ ID NO:176, SEQ ID NO:177, SEQ ID NO:178, SEQ ID NO:179; their complementary sequences; their equivalent sequences, in particular homologous to SEQ ID NO:93, SEQ ID NO:94, SEQ ID NO:169, SEQ ID NO:170, SEQ ID NO:171, SEQ ID NO:172, SEQ ID NO:176, SEQ ID NO:177, SEQ ID NO:178, SEQ ID NO:179;

[0059] sequences encoding all or parts of the peptide sequence defined by SEQ ID NO:95, SEQ ID NO:173, SEQ ID NO:174, SEQ ID NO:175, SEQ ID NO:180, SEQ ID NO:l 1 , SEQ ID NO:182;

[0060] sequences encoding all or parts of a peptide sequence equivalent, in particular homologous to SEQ ID NO:95, SEQ ID NO:173, SEQ ID NO:174, SEQ ID NO:175, SEQ ID NO:180, SEQ ID NO:181, SEQ ID NO:182, which is capable of being recognized by sera of patients infected with the MSRV-1 virus, or in whom the MSRV-1 virus has been reactivated.

[0061] The invention also relates to any nucleic acid probe for the detection of virus associated with MS and/or rheumatoid arthritis (RA), which is capable of hybridizing specifically with any fragment such as is defined above, belonging or lying within the genome of the said pathogenic agent. It relates, in addition, to any nucleic acid probe for detection of a pathogenic and/or infective agent associated with RA, which is capable of hybridizing specifically with any fragment as defined above by reference to the pol and gag genes, and especially with respect to the sequences SEQ ID NOS 40, 51, 56, 59, 60, 61, 62, 89 and SEQ ID NOS 39, 63 and 90.

[0062] The invention also relates to a primer for the amplification by polymerization of an RNA or a DNA of a viral material, associated with MS and/or RA, comprising a nucleotide sequence identical or equivalent to at least one portion of the nucleotide sequence of any fragment such as is defined above, in particular a nucleotide sequence displaying, for any succession of at least 10 contiguous monomers, preferably 15 contiguous monomers, more preferably 18 contiguous monomers and even most preferably 20 contiguous monomers, at least 70% homology with at least the said portion of the said fragment. Preferably, the nucleotide sequence of such a primer is identical to any one of the sequences selected from the group including SEQ ID NO:47 to SEQ ID NO:50, SEQ ID NO:55, SEQ ID NO:64, SEQ ID NO:86, SEQ ID NO:99) to SEQ ID NO:111, SEQ ID NO:183, SEQ ID NO:184, SEQ ID NO:185, and SEQ ID NO:186.

[0063] Generally speaking the invention also encompasses any RNA or DNA, and in particular replication vector, comprising a genomic fragment of the viral material such as is defined above, or a nucleotide fragment such as is defined above.

[0064] The invention also relates to the different peptides encoded by any open reading frame belonging to a nucleotide fragment such as is defined above, in particular any polypeptide, for example any oligopeptide forming or comprising an antigenic determinant recognized by sera of patients infected with the MSRV-1 virus and/or in whom the MSRV-1 virus has been reactivated. Preferably, this polypeptide is antigenic, and is encoded by the open reading frame beginning, in the 5′-3′ direction, at nucleotide 181 and ending at nucleotide 330 of SEQ ID NO:1.

[0065] The invention also encompasses the following polypeptides:

[0066] a)

[0067] a polypeptide encoded by any open reading frame belonging to a nucleotide fragment, fragment I, as defined above;

[0068] a polypeptide, characterized in that the open reading frame encoding it, is comprised, in the 5′-3′ direction, between nucleotide 18 and nucleotide 2304 of SEQ ID NO:93;

[0069] a polypeptide, having a peptide sequence comprising a sequence partially or totally identical to SEQ ID NO:95;

[0070] b)

[0071] a polypeptide, recombinant or synthetic, having a peptide sequence which comprises a sequence identical or equivalent to SEQ ID NO:96; in particular said polypeptide exhibits an enzymatic activity consisting of proteolytic activity;

[0072] a polypeptide, recombinant or synthetic, characterized in that the open reading frame encoding it begins, in the 5′-3′ direction, at nucleotide 18 and ends at nucleotide 340 of SEQ ID NO:93;

[0073] a polypeptide having an inhibitory activity on the proteolytic activity of a polypeptide as defined according to b);

[0074] c)

[0075] a polypeptide, recombinant or synthetic, having a peptide sequence which comprises a sequence identical or equivalent to SEQ ID NO:97; in particular said polypeptide exhibits a reverse transcriptase activity;

[0076] a polypeptide having a peptide sequence which comprises a sequence identical or equivalent to SEQ ID NO:98; in particular said polypeptide exhibits a ribonuclease activity;

[0077] a polypeptide, recombinant or synthetic, characterized in that the open reading frame encoding it begins, in the 5′-3′ direction, at nucleotide 341 and ends at nucleotide 2304 of SEQ ID NO:93;

[0078] a polypeptide, recombinant or synthetic, characterized in that the open reading frame encoding it begins, in the 5′-3′ direction, at nucleotide 1858 and ends at nucleotide 2304 of SEQ ID NO:93.

[0079] a polypeptide, having an inhibitory activity on the reverse transcriptase activity of a polypeptide as defined according to c) or on the ribonuclease H activity of a polypeptide as defined according to c).

[0080] In particular, the invention relates to an antigenic polypeptide recognized by the sera of patients infected with the MSRV-1 virus, and/or in whom the MSRV-1 virus has been reactivated, whose peptide sequence is partially or totally identical or is equivalent to the sequence defined by SEQ ID NO:39, SEQ ID NO:63, SEQ ID NO:87, SEQ ID NO:95, SEQ ID NO:96, SEQ ID NO:97, SEQ ID NO:98, SEQ ID NO:173, SEQ ID NO:174, SEQ ID NO:175, SEQ ID NO:180, SEQ ID NO:181 and SEQ ID NO:182; such a sequence is identical, for example, to any sequence selected from the group including the sequences SEQ ID NO:41 to SEQ ID NO:44, SEQ ID NO:63 and SEQ ID NO:87.

[0081] The present invention also encompasses mono- or polyclonal antibodies directed against the MSRV-1 virus, which are obtained by the immunological reaction of a human or animal body or cells to an immunogenic agent consisting of an antigenic polypeptide such as is defined above.

[0082] The invention next relates to:

[0083] reagents for detection of the MSRV-virus, or of an exposure to the latter, comprising, at least one reactive substance selected from the group consisting of a probe of the present invention, a polypeptide, in particular an antigenic peptide, such as is defined above, or an anti-ligand, in particular an antibody to the said polypeptide;

[0084] all diagnostic, prophylactic or therapeutic compositions comprising one or more peptides, in particular antigenic peptides, such as are defined above, or one or more anti-ligands, in particular antibodies to the peptides, discussed above; such a composition is preferably, and by way of example, a vaccine composition.

[0085] The invention also relates to any diagnostic, prophylactic or therapeutic composition, in particular for inhibiting the expression of at least one virus associated with MS or RA, and/or the enzymatic activities of the proteins of said virus, comprising a nucleotide fragment such as is defined above or a polynucleotide, in particular oligonucleotide, whose sequence is partially identical to that of the said fragment, except for that of the fragment having the nucleotide sequence SEQ ID NO:1. Likewise, it relates to any diagnostic, prophylactic or therapeutic composition, in particular for inhibiting the expression of at least one pathogenic and/or infective agent associated with RA, comprising a nucleotide fragment such as is defined above by reference to the pol and gag genes, and especially with respect to the sequences SEQ ID NOS 40, 51, 56, 59, 60, 61, 62 and 89.

[0086] According to the invention, these same fragments or polynucleotides, in particular oligo nucleotides, may participate in all suitable compositions for detecting, according to any suitable process or method, a pathological and/or infective agent associated with MS and with RA, respectively, in a biological sample. In such a process, an RNA and/or a DNA presumed to belong or originating from the said pathological and/or infective agent, and/or their complementary RNA and/or DNA, is/are brought into contact with such a composition.

[0087] The present invention also relates to any process for detecting the presence or exposure to such a pathological and/or infective agent, in a biological sample, by bringing this sample into contact with a peptide, in particular an antigenic peptide such as is defined above, or an anti-ligand, in particular an antibody to this peptide, such as is defined above.

[0088] In practice, and for example, a device for detection of the MSRV-1 virus comprises a reagent such as is defined above, supported by a solid support which is immunologically compatible with the reagent, and a means for bringing the biological sample, for example a sample of blood or of cerebrospinal fluid, likely to contain anti-MSRV-1 antibodies, into contact with this reagent under conditions permitting a possible immunological reaction, the foregoing items being accompanied by means for detecting the immune complex formed with this reagent.

[0089] Lastly, the invention also relates to the detection of anti-MSRV-1 antibodies in a biological sample, for example a sample of blood or of cerebrospinal fluid, according to which this sample is brought into contact with a reagent such as is defined above, consisting of an antibody, under conditions permitting their possible immunological reaction, and the presence of the immune complex thereby formed with the reagent is then detected.

DEFINITIONS

[0090] Before describing the invention in detail, different terms used in the description and the claims are now defined:

[0091] strain or isolate is understood to mean any infective and/or pathogenic biological fraction containing, for example, viruses and/or bacteria and/or parasites, generating pathogenic and/or antigenic power, harbored by a culture or a living host; as an example, a viral strain according to the above definition can contain a coinfective agent, for example a pathogenic protist,

[0092] the term “MSRV” used in the present description denotes any pathogenic and/or infective agent associated with MS, in particular a viral species, the attenuated strains of the said viral species or the defective-interfering particles or particles containing coencapsidated genomes, or alternatively genomes recombined with a portion of the MSRV-1 genome, derived from this species. Viruses, and especially viruses containing RNA, are known to have a variability resulting, in particular, from relatively high rates of spontaneous mutation (7), which will be borne in mind below for defining the notion of equivalence,

[0093] human virus is understood to mean a virus capable of infecting, or of being harbored by human beings,

[0094] in view of all the natural or induced variations and/or recombination which may be encountered when implementing the present invention, the subjects of the latter, defined above and in the claims, have been expressed including the equivalents or derivatives of the different biological materials defined below, in particular of the homologous nucleotide or peptide sequences,

[0095] the variant of a virus or of a pathogenic and/or infective agent according to the invention comprises at least one antigen recognized by at least one antibody directed against at least one corresponding antigen of the said virus and/or said pathogenic and/or infective agent, and/or a genome any part of which is detected by at least one hybridization probe and/or at least one nucleotide amplification primer specific for the said virus and/or pathogenic and/or infective agent, such as, for example, for the MSRV-1 virus, the primers and probes having a nucleotide sequence chosen from SEQ ID NO:20 to SEQ ID NO:24, SEQ ID NO:26, SEQ ID NO:16 to SEQ ID NO:19, SEQ ID NO:31 to SEQ ID NO:33, SEQ ID NO:45, SEQ ID NO:47, SEQ ID NO:48, SEQ ID NO:49, SEQ ID NO:50, SEQ ID NO:45, and their complementary sequences, under particular hybridization conditions well known to a person skilled in the art,

[0096] according to the invention, a nucleotide fragment or an oligonucleotide or polynucleotide is an arrangement of monomers, or a biopolymer, characterized by the informational sequence of the natural nucleic acids, which is capable of hybridizing with any other nucleotide fragment under predetermined conditions, it being possible for the arrangement to contain monomers of different chemical structures and to be obtained from a molecule of natural nucleic acid and/or by genetic recombination and/or by chemical synthesis; a nucleotide fragment may be identical to a genomic fragment of the MSRV-1 virus discussed in the present invention, in particular a gene of this virus, for example pol or env in the case of the said virus,

[0097] thus, a monomer can be a natural nucleotide of nucleic acid whose constituent elements are a sugar, a phosphate group and a nitrogenous base; in RNA the sugar is ribose, in DNA the sugar is 2-deoxyribose; depending on whether the nucleic acid is DNA or RNA, the nitrogenous base is chosen from adenine, guanine, uracil, cytosine and thymine; or the nucleotide can be modified in at least one of the three constituent elements; as an example, the modification can occur in the bases, generating modified bases such as inosine, 5-methyldeoxycytidine, deoxyuridine, 5-(dimethylamino)deoxyuridine, 2,6-diaminopurine, 5-bromodeoxyuridine and any other modified base promoting hybridization; in the sugar, the modification can consist of the replacement of at least one deoxyribose by a polyamide (8), and in the phosphate group, the modification can consist of its replacement by esters chosen, in particular, from diphosphate, alkyl- and arylphosphonate and phosphorothioate esters,

[0098] “informational sequence” is understood to mean any ordered succession of monomers whose chemical nature and order in a reference direction constitute an item of functional information of the same quality as that of the natural nucleic acids,

[0099] hybridization is understood to mean the process during which, under suitable working conditions, two nucleotide fragments having sufficiently complementary sequences pair to form a complex structure, in particular double or triple, preferably in the form of a helix,

[0100] a probe comprises a nucleotide fragment synthesized chemically or obtained by digestion or enzymatic cleavage of a longer nucleotide fragment, comprising at least six monomers, advantageously from 10 to 1000 monomers, preferably 10 to 30 monomers and more preferably 18 to 30, and possessing a specificity of hybridization under particular conditions; preferably, a probe possessing fewer than 10 monomers, but preferably fewer than 15 monomers is not used alone, but is used in the presence of other probes of equally short size or otherwise; under certain special conditions, it may be useful to use probes of size greater than 100 monomers; a probe may be used, in particular, for diagnostic purposes, such molecules being, for example, capture and/or detection probes,

[0101] the capture probe may be immobilized on a solid support by any suitable means, that is to say directly or indirectly, for example by covalent bonding or passive adsorption,

[0102] the detection probe may be labelled by means of a label chosen, in particular, fro n m radioactive isotopes, enzymes chosen, in particular, from peroxidase and alkaline phosphatase and those capable of hydrolyzing a chromogenic, fluorogenic or luminescent substrate, chromophoric chemical compounds, chromogenic, fluorogenic or luminescent compounds, nucleotide base analogues and biotin,

[0103] the probes used for diagnostic purposes of the invention may be employed in all known hybridization techniques, and in particular the techniques termed “DOT-BLOT” (9), “SOUTHERN BLOT” (10), “NORTHERN BLOT”, which is a technique identical to the “SOUTHERN BLOT” technique but which uses RNA as target, and the SANDWICH technique (11); advantageously, the SANDWICH technique is used in the present invention, comprising a specific capture probe and/or a specific detection probe, on the understanding that the capture probe and the detection probe must possess an at least partially different nucleotide sequence,

[0104] any probe according to the present invention can hybridize in vivo or in vitro with RNA and/or with DNA in order to block the phenomena of replication, in particular translation and/or transcription, and/or to degrade the said DNA and/or RNA,

[0105] a primer is a probe comprising at least six monomers, and advantageously from 10 to 30 monomers, and preferably from 18 to 25 monomers, possessing a specificity of hybridization under particular conditions for the initiation of an enzymatic polymerization, for example in an amplification technique such as PCR (polymerase chain reaction), in an elongation process such as sequencing, in a method of reverse transcription or the like,

[0106] two nucleotide or peptide sequences are termed equivalent or derived with respect to one another, or with respect to a reference sequence, if functionally the corresponding biopolymers can perform substantially the same role, without being identical, as regards the application or use in question, or in the technique in which they participate; two sequences are, in particular, equivalent if they are obtained as a result of natural variability, in particular spontaneous mutation of the species from which they have been identified, or induced variability, as are two homologous sequences, homology being defined below,

[0107] “variability” is understood to mean any spontaneous or induced modification of a sequence, in particular by substitution and/or insertion and/or deletion of nucleotides and/or of nucleotide fragments, and/or extension and/or shortening of the sequence at one or both ends; an unnatural variability can result from the genetic engineering techniques used, for example the choice of synthesis primers, degenerate or otherwise, selected for amplifying a nucleic acid; this variability can manifest itself in modifications of any starting sequence, considered as reference, and capable of being expressed by a degree of homology relative to the said reference sequence,

[0108] homology characterizes the degree of identity of two nucleotide or peptide fragments compared; it is measured by the percentage identity which is determined, in particular, by direct comparison of nucleotide or peptide sequences, relative to reference nucleotide or peptide sequences,

[0109] this percentage identity has been specifically determined for the nucleotide fragments, clones in particular, dealt with in the present invention, which are homologous to the fragments identified, for the MSRV-1 virus, by SEQ ID NO:1 to NO:9, SEQ ID NO:46, SEQ ID NO:51 to SEQ ID NO:53, SEQ ID NO:40, SEQ ID NO:56, SEQ ID NO:57 and SEQ ID NO:93, as well as for the probes and primers homologous to the probes and primers identified by SEQ ID NO:20 to SEQ ID NO:24, SEQ ID NO:26, SEQ ID NO:16 to SEQ ID NO:19, SEQ ID NO:31 to SEQ ID NO:33, SEQ ID NO:45, SEQ ID NO:47, SEQ ID NO:48, SEQ ID NO:49, SEQ ID NO:50, SEQ ID NO:55, SEQ ID NO:40, SEQ ID NO:56, SEQ ID NO:57 and SEQ ID NO:99 to SEQ ID NO:111; as an example, the smallest percentage identity observed between the different general consensus sequences of nucleic acids obtained from fragments of MSRV-1 viral RNA, originating from the LM7PC and PLI-2 lines according to a protocol detailed later, is 67% in the region described in FIG. 1,

[0110] any nucleotide fragment is termed equivalent or derived from a reference fragment if it possesses a nucleotide sequence equivalent to the sequence of the reference fragment; according to the above definition, the following in particular are equivalent to a reference nucleotide fragment:

[0111] a) any fragment capable of hybridizing at least partially with the complement of the reference fragment,

[0112] b) any fragment whose alignment with the reference fragment results in the demonstration of a larger number of identical contiguous bases than with any other fragment originating from another taxonomic group,

[0113] c) any fragment resulting, or capable of resulting, from the natural variability of the species from which it is obtained,

[0114] d) any fragment capable of resulting from the genetic engineering techniques applied to the reference fragment,

[0115] e) any fragment containing at least eight contiguous nucleotides encoding a peptide which is homologous or identical to the peptide encoded by the reference fragment,

[0116] f) any fragment which is different from the reference fragment by insertion, deletion or substitution of at least one monomer, or extension or shortening at one or both of its ends; for example, any fragment corresponding to the reference fragment flanked at one or both of its ends by a nucleotide sequence not coding for a polypeptide,

[0117] polypeptide is understood to mean, in particular, any peptide of at least two amino acids, in particular an oligopeptide, or protein, and for example an enzyme, extracted, separated or substantially isolated or synthesized through human intervention, in particular those obtained by chemical synthesis or by expression in a recombinant organism,

[0118] polypeptide partially encoded by a nucleotide fragment is understood to mean a polypeptide possessing at least three amino acids encoded by at least nine contiguous monomers lying within the said nucleotide fragment,

[0119] an amino acid is termed analogous to another amino acid when their respective physicochemical properties, such as polarity, hydrophobicity and/or basicity and/or acidity and/or neutrality are substantially the same; thus, a leucine is analogous to an isoleucine.

[0120] any polypeptide is termed equivalent or derived from a reference polypeptide if the polypeptides compared have substantially the same properties, and in particular the same antigenic, immunological, enzymological and/or molecular recognition properties; the following in particular are equivalent to a reference polypeptide:

[0121] a) any polypeptide possessing a sequence in which at least one amino acid has been replaced by an analogous amino acid,

[0122] b) any polypeptide having an equivalent peptide sequence, obtained by natural or induced variation of the said reference polypeptide and/or of the nucleotide fragment coding for the said polypeptide,

[0123] c) a mimotope of the said reference polypeptide,

[0124] d) any polypeptide in whose sequence one or more amino acids of the L series are replaced by an amino acid of the D series, and vice versa,

[0125] e) any polypeptide into whose sequence a modification of the side chains of the amino acids has been introduced, such as, for example, an acetylation of the amine functions, a carboxylation of the thiol functions, an esterification of the carboxyl functions,

[0126] f) any polypeptide in whose sequence one or more peptide bonds have been modified, such as, for example, carba, retro, inverso, retro-inverso, reduced and methylenoxy bonds,

[0127] g) any polypeptide at least one antigen of which is recognized by an antibody directed against a reference polypeptide,

[0128] the percentage identity characterizing the homology of two peptide fragments compared is, according to the present invention, at least 50% and preferably at least 70%.

[0129] In view of the fact that a virus possessing reverse transcriptase enzymatic activity may be genetically characterized equally well in RNA and in DNA form, both the viral DNA and RNA will be referred to for characterizing the sequences relating to a virus possessing such reverse transcriptase activity, termed MSRV-1 according to the present description.

[0130] The expressions of order used in the present description and the claims, such as “first nucleotide sequence”, are not adopted so as to express a particular order, but so as to define the invention more clearly.

[0131] Detection of a substance or agent is understood below to mean both an identification and a quantification, or a separation or isolation, of the said substance or said agent.

BRIEF DESCRIPTION OF THE DRAWINGS

[0132] A better understanding of the invention will be gained on reading the detailed description which follows, prepared with reference to the attached figures, in which:

[0133]
FIG. 1 shows general consensus sequences of nucleic acids of the MSRV-1B clones amplified by the PCR technique in the “pol” region defined by Shih (12), from viral DNA originating from the LM7PC and PLI-2 lines, and identified under the references SEQ ID NO:3, SEQ ID NO:4, SEQ ID NO:5 and SEQ ID NO:6, and the common consensus with amplification primers bearing the reference SEQ ID NO:7;

[0134]
FIG. 2 gives the definition of a functional reading frame for each MSRV-1B/“PCR pol” type family, the said families A to D being defined, respectively, by the nucleotide sequences SEQ ID NO:3, SEQ ID NO:4, SEQ ID NO:5 and SEQ ID NO:6 described in FIG. 1;

[0135]
FIG. 3 gives an example of consensus of the MSRV-2B sequences, identified by SEQ ID NO:11;

[0136]
FIG. 4 is a representation of the reverse transcriptase (RT) activity in dpm (disintegrations per minute) in the sucrose fractions taken from a purification gradient of the virions produced by the B lymphocytes in culture from a patient suffering from MS;

[0137]
FIG. 5 gives, under the same experimental conditions as in FIG. 4, the assay of the reverse transcriptase activity in the culture of a B lymphocyte line obtained from a control free from MS;

[0138]
FIG. 6 shows the nucleotide sequence of the clone PSJ17 (SEQ ID NO:9);

[0139]
FIG. 7 shows the nucleotide sequence SEQ ID NO:8 of the clone designated M003-P004;

[0140]
FIG. 8 shows the nucleotide sequence SEQ ID NO:2 of the clone F11-1; the portion located between the two arrows in the region of the primer corre- sponds to a variability imposed by the choice of primer which was used for the cloning of F11-1; in this same Figure, the translation into amino acids is shown;

[0141]
FIG. 9 shows the nucleotide sequence SEQ ID NO:1, and a possible functional reading frame of SEQ ID NO:1 in terms of amino acids; on this sequence, the consensus sequences of the pol gene are underlined;

[0142]
FIGS. 10 and 11 give the results of a PCR, in the form of a photograph under ultraviolet light of an ethidium bromide-impregnated agarose gel, of the amplification products obtained from the primers identified by SEQ ID NO:16, SEQ ID NO:17, SEQ ID NO:18 and SEQ ID NO:19;

[0143]
FIG. 12 gives a representation in matrix form of the homology between SEQ ID NO:1 of MSRV-1 and that of an endogenous retrovirus designated HSERV9; this homology of at least 65% is demonstrated by a continuous line, the absence of a line meaning a homology of less than 65%;

[0144]
FIG. 13 shows the nucleotide sequence SEQ ID NO:46 of the clone FBd3;

[0145]
FIG. 14 shows the sequence homology between the clone FBd3 and the HSERV-9 retrovirus;

[0146]
FIG. 15 shows the nucleotide sequence SEQ ID NO:51 of the clone t pol;

[0147]
FIGS. 16 and 17 show, respectively, the nucleotide sequences SEQ ID NO:52 and SEQ ID NO:53 of the clones JLBc1 and JLBc2, respectively;

[0148]
FIG. 18 shows the sequence homology between the clone JLBc1 and the clone FBd3;

[0149] and FIG. 19 the sequence homology between the clone JLBc2 and the clone FBd3;

[0150]
FIG. 20 shows the sequence homology between the clones JLBc1 and JLBc2;

[0151]
FIGS. 21 and 22 show the sequence homology between the HSERV-9 retrovirus and the clones JLBc1 and JLBc2, respectively;

[0152]
FIG. 23 shows the nucleotide sequence SEQ ID NO:56 of the clone GM3;

[0153]
FIG. 24 shows the sequence homology between the HSERV-9 retrovirus and the clone GM3;

[0154]
FIG. 25 shows the localization of the different clones studied, relative to the genome of the known retrovirus ERV9;

[0155]
FIG. 26 shows the position of the clones F11-1, M003-P004, MSRV-1B and PSJ17 in the region hereinafter designated MSRV-1 pol*;

[0156]
FIG. 27, split into three successive FIGS. 27a-27c, shows a possible reading frame covering the whole of the pol gene;

[0157]
FIG. 28 shows, according to SEQ ID NO:40, the nucleotide sequence coding for the peptide fragment POL2B, having the amino acid sequence identified by SEQ ID NO:39);

[0158]
FIG. 29 shows the OD values (ELISA tests) at 492 nm obtained for 29 sera of MS patients and 32 sera of healthy controls tested with an anti-IgG antibody;

[0159]
FIG. 30 shows the OD values (ELISA tests) at 492 nm obtained for 36 sera of MS patients and 42 sera of healthy controls tested with an anti-IgM antibody;

[0160] FIGS. 31 to 33 show the results obtained (relative intensity of the spots) for 43 overlapping octapeptides covering the amino acid sequence 61-110, according to the Spotscan technique, respectively with a pool of MS sera, with a pool of control sera and with the pool of MS sera after deduction of a background corresponding to the maximum signal detected on at least one octapeptide with the control serum (intensity=1), on the understanding that these sera were diluted to 1/50. The bar at the far right-hand end represents a graphic scale standard unrelated to the serological test;

[0161]
FIG. 34 shows the SEQ ID NO:41 and SEQ ID NO:42 of two polypeptides comprising immunodominant regions, while SEQ ID NO:43 and 44 represent immunoreactive polypeptides specific to MS;

[0162]
FIG. 35 shows the nucleotide sequence SEQ ID NO:59 of the clone LB19 and three potential reading frames of SEQ ID NO:59 in terms of amino acids;

[0163]
FIG. 36 shows the nucleotide sequence SEQ ID NO:88 (GAG*) and a potential reading frame of SEQ ID NO:88 in terms of amino acids;

[0164]
FIG. 37 shows the sequence homology between the clone FBd13 and the HSERV-9 retrovirus; according to this representation, the continuous line means a percentage homology greater than or equal to 70% and the absence of a line means a smaller percentage homology;

[0165]
FIG. 38 shows the nucleotide sequence SEQ ID NO:61 of the clone FP6 and three potential reading frames of SEQ ID NO:61 in terms of amino acids;

[0166]
FIG. 39 shows the nucleotide sequence SEQ ID NO:89 of the clone G+E+A and three potential reading frames of SEQ ID NO:89 in terms of amino acids;

[0167]
FIG. 40 shows a reading frame found in the region E and coding for an MSRV-1 retroviral protease identified by SEQ ID NO:90;

[0168]
FIG. 41 shows the response of each serum of patients suffering from MS, indicated by the symbol (+), and of healthy patients, symbolised by (−), tested with an anti-IgG antibody, expressed as net optical density at 492 nm;

[0169]
FIG. 42 shows the response of each serum of patients suffering from MS, indicated by the symbols (+) and (QS), and of healthy patients (−), tested with an anti-IgM antibody, expressed as net optical density at 492 nm;

[0170]
FIG. 43 shows the RT-activity profile in sucrose density gradients of pellets from B-cell line supernatants; Control B-cell line n was obtained from the relative of a patient with mitochondriopathy. MS B-Cell line o was obtained from a patient with definite MS;

[0171]
FIG. 44 shows the nucleotide and amino acid alignment of the conserved pol regions of viruses detected in the study (of Example 18) by the “Pan-retrovirus” PCR. “Deletions” are represented by dashes and standard single-letter abbreviations are used to designate amino acids and nucleotides (i=inosine). The most highly conserved VLPQG and YXDD regions are shown as separate blocks in bold type at the end of each sequence. Amino acids which are present in all or in all but one of the sequences are underlined. PCR primers (modified from (12)) PAN-UO and PAN-UI are orientated 5′ to 3′ (sense) whereas primer PAN-DI is 3′ to 5′ (antisense). Degeneracies are shown above (PAN-UO & PAN-DI) or below (PAN-UI) the PCR primer sequences. “I” denotes the nine base 5′ extension cttggatcc, “-I” denotes the nine base 5′ extension ctcaagctt. The capture and detector probes DpV1 and CpV1b used in the ELOSA assay are shown below a representative MSRV-cpol sequence. At three positions below the translated MSRV-cpol sequence alternative amino acids (representing “non-silent” nucleic acid variations) are shown in italics—K and Y substitutions were only observed in PLI-1 derived clones whereas R and W were encoded by a significant proportion of the clones irrespective of derivation. Note that DpV1 is peroxidase labelled and that CpV1b may be biotinylated at the 5′ end if streptavidin coated plates are used. The name of each sequence is indicated at the left of the figure.

[0172] HTLV1: Human Leukaemia Virus type 1; HIV1: Human Immunodeficiency Virus type 1; MoMLV: Moloney-Murine Leukaemia Virus; MPMV: Mason-Pfizer Monkey Virus. ERV9: Endogenous Retrovirus 9. MSRV-cpol: Multiple Sclerosis associated RetroVirus conserved pol region.

[0173]
FIG. 45 shows a phylogenic tree which is based on the conserved amino acid region encoded by the pol gene of MSRV and of representative endogenous and exogenous retroviruses and DNA viruses with reverse transcriptase. It was generated by the U.P.G.M.A. tree program of Geneworks® software.

[0174] HSRV: Human Spumaretrovirus. EIAV: Equine Infectious Aenemia Virus. BLV: Bovine Leukaemia Virus. HIV1, HIV2: Human Immunodeficiency Viruses type 1 and 2. HTLV1 and HTLV2: Human Leukaemia Viruses type 1 and 2. F-MuLV: Friend-Murine Leukaemia Virus. MoMLV: Moloney-Murine Leukaemia Virus. BAEV: Baboon Endogenous Virus. GaLV/Gibbon Ape Leukaemia Virus. HUMER41: Human Endogenous Retroviral sequence, clone 41. IAP: Intracistemal A-type Particle. MPMV: Mason-Pfizer Monkey Virus. HERVK10: Human Endogenous Retrovirus K10. MMTV: Mouse Mammary tumour Virus. HSERV9 (ERV9 database sequence): Human sequence of Endogenous Retrovirus 9. MSRV: Multiple Sclerosis associated RetroVirus. SIV: Simian Immunodeficiency Virus; RTLV-H: Reverse Transcriptase-Like Viral sequence H; SFV: Simian Foamy Virus; VISNA: Visna retrovirus; SIV1: Simian Immunodeficiency Virus type 1; SRV-2: Simian Retrovirus type 2; SMRV-H: Squirrel Monkey Retrovirus H.

[0175]
FIG. 46 shows the MSRV sequence in the Protease and Reverse-Transcriptase regions of the pol gene. The amino acid translation is aligned under the corresponding nucleotide sequence. The region corresponding to the Protease ORF cloned in a recombinant vector and expressed in E coli, is boxed. The regions corresponding to the A and B fragments amplified on plasma samples from MS patients are indicated by brackets. The Reverse-Transc,riptase (RT) and RNase H (RNH) region is boxed with dotted line. The highly conserved amino acids and/or active sites of enzyme activities of both PRT and RT (including RNH) are shown underlined.

[0176]
FIG. 47A illustrates the specific detection of MSRV-pol RNA sequence by RT-PCR in the sucrose density fraction associated with RT-activity and in MS plasma; FIG. 47B shows the RT-activity profile on a sucrose density gradient obtained with extracellular virion pelleted from an MS choroid-plexus culture. The photograph below shows an agarose gel loaded with PCR products amplified from round 1 (ST1.1) RT-PCR products with the ST1.2 primer set. From left to right: water control 1 from RT-PCR step with ST1.1 set; water control 2 amplified from water control 1 with ST1.2 nested primers; Molecular weight markers; Fraction n°1 to 10 corresponding to the RT-activity profile shown above; Plasma samples C1 and C2 from healthy blood donors. Plasma samples MS1 and MS2 from two MS patients.

[0177]
FIG. 48 shows an example of a variant and/or recombined sequence in the region of the pol gene defined by homology with the overlapping regions described in FIG. 25, as GM3, MSRV-1 pol*, t pol and FBd3.

[0178]
FIG. 49 shows the nucleotide (FIG. 49A) and amino acid (FIG. 49B) alignments of the pol region between clones 1, 5 and 8 of the same patient (Experiment 46-7).

[0179]
FIG. 50 shows the nucleotide (FIG. 50A) and amino acid (FIG. 50B) alignment is of the pol reg ion between clones 41, 43 and 42 of the same patient (Experiment 68-1).

[0180]
FIG. 51 shows the nucleotide (FIG. 51A) and amino acid (FIG. 51B) alignments of the pol region between the consensus sequence (SEQ ID NO: 176) of clones 1, 5 and 8 of the same patient (Experiment 46-7) and SEQ ID NO:1, and between their corresponding peptide sequences.

[0181]
FIG. 52 shows the nucleotide (FIG. 52A) and amino acid (FIG. 52B) alignments of the pol region between the consensus sequence (SEQ ID NO: 169) of clones 41, 43 and 42 of the same patient (Experiment 68-1) and SEQ ID NO:1, and between their corresponding peptide sequences.

[0182]
FIG. 53 shows the nucleotide (FIG. 53A) and amino acid (FIG. 53B) alignments of the pol region between the consensus sequence (SEQ ID NO: 176) of clones 1, 5 and 8 of the same patient (Experiment 46-7) and the consensus sequence (SEQ ID NO: 169) of clones 41, 43 and 42 of the same patient (Experiment 68-1).

[0183] Table 5 (at the end of the description) shows the sequences obtained by RT-PCR with degenerate pol primers on sucrose density gradient fractions containing the peak of RT-activity or its negative control (of Example 18); and

[0184] Table 6 (at the end of the description) shows the clinical data and results of MSRV-cpol detection by “Pan-retro” PCR with specific ELOSA assay, on CSF from MS and control patients (of Example 18).

DETAILED DESCRIPTION OF PREFERRED EMBODIMENTS

Example 1

Obtaining Clones Designated MSRV-1B and MSRV-213, Defining, Respectively, a Retrovirus MSRV-1 and a Coinfective Agent MSRV2, by “Nested” PCR Amplification of the Conserved POL Regions of Retroviruses on Virion Preparations Originating from the LM7PC and PLI-2 Lines

[0185] A PCR technique derived from the technique published by Shih (12) was used. This technique enables all trace of contaminant DNA to be removed by treating all the components of the reaction medium with DNase. It concomitantly makes it possible, by the use of different but overlapping primers in two successive series of PCR amplification cycles, to increase the chances of amplifying a cDNA synthesized from an amount of RNA which is small at the outset and further reduced in the sample by the spurious action of the DNAse on the RNA. In effect, the DNase is used under conditions of activity in excess which enable all trace of contaminant DNA to be removed before inactivation of this enzyme remaining in the sample by heating to 85° C. for 10 minutes. This variant of the PCR technique described by Shih (12) was used on a cDNA synthesized from the nucleic acids of fractions of infective particles purified on a sucrose gradient according to the technique described by H. Perron (13) from the “POL-2” isolate (ECACC No. V92072202) produced by the PLI-2 line (ECACC No. 92072201) on the one hand, and from the MS7PG isolate (ECACC No. V93010816) produced by the LM7PC line (ECACC No. 93010817) on the other hand. These cultures were obtained according to the methods which formed the subject of the patent applications published under Nos WO 93/20188 and WO 93/20189.

[0186] After cloning the products amplified by this technique with the TA Cloning Kit™ and analysis of the sequence using an Applied Biosystems model 373A Automatic Sequencer, the sequences were analysed using the Geneworks® software on the latest available version of the GenBank™ data bank.

[0187] The sequences cloned and sequenced from these samples correspond, in particular, to two types of sequence: a first type of sequence, to be found in the majority of the clones (55% of the clones originating from the POL-2 isolates of the PLI-2 culture, and 67% of the clones originating from the MS7PG isolates of the LM7PC cultures), which corresponds to a family of “pol” sequences closely similar to, but different from, the endogenous human retrovirus designated ERV-9 or HSERV-9, and a second type of sequence which corresponds to sequences very strongly homologous to a sequence attributed to another infective and/or pathogenic agent designated MSRV-2.

[0188] The first type of sequence, representing the majority of the clones, consists of sequences whose variability enables four subfamilies of sequences to be defined. These subfamilies are sufficiently similar to one another for it to be possible to consider them to be quasi-species originating from the same retrovirus, as is well known for the HIV-1 retrovirus (14), or to be the outcome of interference with several endogenous proviruses coregulated in the producing cells. These more or less defective endogenous elements are sensitive to the same regulatory signals possibly generated by a replicative provirus, since they belong to the same family of endogenous retroviruses (15). This new family of endogenous retroviruses, or alternatively this new retroviral species from which the generation of quasi-species has been obtained in culture, and which contains a consensus of the sequences described below, is designated MSRV-1B.

[0189]
FIG. 1 presents the general consensus sequences of the sequences of the different MSRV-1B clones sequenced in this experiment, these sequences being identified, respectively, by SEQ ID NO:3, SEQ ID NO:4, SEQ ID NO:5 and SEQ ID NO:6. These sequences display a homology with respect to nucleic acids ranging from 70% to 88% with the HSERV9 sequence referenced X57147 and M37638 in the GenBank® data base. Four “consensus” nucleic acid sequences representative of different quasi-species of a possibly exogenous retrovirus MSRV-1B, or of different subfamilies of an endogenous retrovirus MSRV-1B, have been defined. These representative consensus sequences are presented in FIG. 2, with the translation into amino acids. A functional reading frame exists for each subfamily of these MSRV-1B sequences, and it can be seen that the functional open reading frame corresponds in each instance to the amino acid sequence appearing on the second line under the nucleic acid sequence. The general consensus of the MSRV-1B sequence, identified by SEQ ID NO:7 and obtained by this PCR technique in the “pol” region, is presented in FIG. 1.

[0190] The second type of sequence representing the majority of the clones sequenced is represented by the sequence MSRV-2B presented in FIG. 3 and identified by SEQ ID NO:11. The differences observed in the sequences corresponding to the PCR primers are explained by the use of degenerate primers in mixture form used under different technical conditions.

[0191] The MSRV-2B sequence (SEQ ID NO:11) is sufficiently divergent from the retroviral sequences already described in the data banks for it to be suggested that the sequence region in question belongs to a new infective agent, designated MSRV-2. This infective agent would, in principle, on the basis of the analysis of the first sequences obtained, be related to a retrovirus but, in view of the technique used for obtaining this sequence, it could also be a DNA virus whose genome codes for an enzyme which incidentally possesses reverse transcriptase activity, as is the case, for example, with the hepatitis B virus, HBV (12). Furthermore, the random nature of the degenerate primers used for this PCR amplification technique may very well have permitted, as a result of unforeseen sequence homologies or of conserved sites in the gene for a related enzyme, the amplification of a nucleic acid originating from a prokaryotic or eukaryotic pathogenic and/or coinfective agent (protist).

Example 2

Obtaining Clones Designated MSRV-1B and MSRV-2B, Defining a Family MSRV-1 and MSRV-2, by “Nested” PCR Amplification of the Conserved POL Regions of Retroviruses on Preparations of B Lymphocytes from a New Case of MS

[0192] The same PCR technique, modified according to the technique of Shih (12), was used to amplify and sequence the RNA nucleic acid material present in a purified fraction of virions at the peak of “LM7-like” reverse transcriptase activity on a sucrose gradient according to the technique described by H. Perron (13), and according to the protocols mentioned in Example 1, from a spontaneous lymphoblastoid line obtained by self-immortalization in culture of B lymphocytes from an MS patient who was seropositive for the Epstein-Barr virus (EBV), after setting up the blood lymphoid cells in culture in a suitable culture medium containing a suitable concentration of cyclosporin A. A representation of the reverse transcriptase activity in the sucrose fractions taken from a purification gradient of the virions produced by this line is presented in FIG. 4. Similarly, the culture supernatants of a B line obtained under the same conditions from a control free from MS were treated under the same conditions, and the assay of reverse transcriptase activity in the sucrose gradient fractions proved negative throughout (background), and is presented in FIG. 5. Fraction 3 of the gradient corresponding to the MS B line and the same fraction without reverse transcriptase activity of the non-MS control gradient were analysed by the same RT-PCR technique as before, derived from Shih (12), followed by the same steps of cloning and sequencing as described in Example 1.

[0193] It is particularly noteworthy that the MSRV-1 and MSRV-2 type sequences are to be found only in the material associated with a peak of “LM7-like” reverse transcriptase activity originating from the MS B lymphoblastoid line. These sequences were not to be found with the material from the control (non-MS) B lymphoblastoid line in 26 recombinant clones taken at random. Only Mo-MuLV type contaminant sequences, originating from the commercial reverse transcriptase used for the cDNA synthesis step, and sequences without any particular retroviral analogy were to be found in this control, as a result of the “consensus” amplification of homologous polymerase sequences which is produced by this PCR technique. Furthermore, the absence of a concentrated target which competes for the amplification reaction in the control sample permits the amplification of dilute contaminants. The difference in results is manifestly highly significant (chi-squared, p<0.001).

Example 3

Obtaining a Clone PSJ17, Defining a Retrovirus MSRV-1, by Reaction of Endogenous Reverse Transcriptase with a Virion Preparation Originating from the PLI-2 Line

[0194] This approach is directed towards obtaining reverse-transcribed DNA sequences from the supposedly retroviral RNA in the isolate using the reverse transcriptase activity present in this same isolate. This reverse transcriptase activity can theoretically function only in the presence of a retroviral RNA linked to a primer tRNA or hybridized with short strands of DNA already reverse-transcribed in the retroviral particles (16). Thus, the obtaining of specific retroviral sequences in a material contaminated with cellular nucleic acids was optimized according to these authors by means of the specific enzymatic amplification of the portions of viral RNAs with a viral reverse transcriptase activity. To this end, the authors determined the particular physicochemical conditions under which this enzymatic activity of reverse transcription on RNAs contained in virions could be effective in vitro. These conditions correspond to the technical description of the protocols presented below (endogenous RT reaction, purification, cloning and sequencing).

[0195] The molecular approach consisted in using a preparation of concentrated but unpurified virion obtained from the culture supernatants of the PLI-2 line, prepared according to the following method: the culture supernatants are collected twice weekly, precentrifuiged at 10,000 rpm for 30 minutes to remove cell debris and then frozen at −80° C. or used as they are for the following steps. The fresh or thawed supernatants are centrifuged on a cushion of 30% glycerol-PBS at 100,000 g (or 30,000 rpm in a type 45 T LKB- HITACHI rotor) for 2 h at 4° C. After removal of the supernatant, the sedimented pellet is taken up in a small volume of PBS and constitutes the fraction of concentrated but unpurified virion. This concentrated but unpurified viral sample was used to perform a so-called endogenous reverse transcription reaction, as described below.

[0196] A volume of 200 ml of virion purified according to the protocol described above, and containing a reverse transcriptase activity of approximately 1-5 million dpm, is thawed at 37° C. until a liquid phase appears, and then placed on ice. A 5-fold concentrated buffer was prepared with the following components: 500 mM Tris-HCl pH 8.2; 75 mM NaCl; 25 mM MgCl2; 75 mM DTT and 0.10% NP 40; 100 ml of 5×buffer+25 ml of a 100 mM solution of dATP+25 ml of a 100 mM solution of dTTP+25 ml of a 100 mM solution of dGTP+25 ml of a 100 mM solution of dCTP+100 ml of sterile distilled water+200 ml of the virion suspension (RT activity of 5 million DPM) in PBS were mixed and incubated at 42° C. for 3 hours. After this incubation, the reaction mixture is added directly to a buffered phenol/chloroform/isoamyl alcohol mixture (Sigma ref. P 3803); the aqueous phase is collected and one volume of sterile distilled water is added to the organic phase to re-extract the residual nucleic acid material. The collected aqueous phases are combined, and the nucleic acids contained are precipitated by adding 3M sodium acetate pH 5.2 to {fraction (1/10)} volume+2 volumes of ethanol+1 ml of glycogen (Boehringer-Mannheim ref. 901 393) and placing the sample at −20° C. for 4 h or overnight at +4° C. The precipitate obtained after centrifugation is then washed with 70% ethanol and resuspended in 60 ml of distilled water. The products of this reaction were then purified, cloned and sequenced according to the protocol which will now be described: blunt-ended DNAs with unpaired adenines at the ends were generated: a “filling-in” reaction was first performed: 25 ml of the previously purified DNA solution were mixed with 2 ml of a 2.5 mM solution containing, in equimolar amounts, dATP+dGTP+dTTP+dCTP/1 ml of T4 DNA polymerase (Boehringer-Mannheim ref. 1004 786)/5 ml of 10×“incubation buffer for restriction enzyme” (Boehringer-Mannheim ref. 1417 975)/1 ml of a 1% bovine serum albumin solution/16 ml of sterile distilled water. This mixture was incubated for 20 minutes at 11° C. 50 ml of TE buffer and 1 ml of glycogen (Boehringer-Mannheim ref. 901 393) were added thereto before extraction of the nucleic acids with phenol/chloroform/isoamyl alcohol (Sigma ref. P 3803) and precipitation with sodium acetate as described above. The DNA precipitated after centrifugation is resuspended in 10 ml of 10 mM Tris buffer pH 7.5. 5 ml of this suspension were then mixed with 20 ml of 5×Taq buffer, 20 ml of 5 mM dATP, 1 ml (5 U) of Taq DNA polymerase (Amplitaq™) and 54 ml of sterile distilled water. This mixture is incubated for 2 h at 75° C. with a film of oil on the surface of the solution. The DNA suspended in the aqueous solution drawn off under the film of oil after incubation is precipitated as described above and resuspended in 2 ml of sterile distilled water. The DNA obtained was inserted into a plasmid using the TA Cloning™ kit. The 2 ml of DNA solution were mixed with 5 ml of sterile distilled water, 1 ml of a 10-fold concentrated ligation buffer “10×LIGATION BUFFER”, 2 ml of “pCR™ VECTOR” (25 ng/ml) and 1 ml of “TA DNA LIGASE”. This mixture was incubated overnight at 12° C. The following steps were carried out according to the instructions of the TA Cloning™ kit (British Biotechnology). At the end of the procedure, the white colonies of recombinant bacteria (white) were picked out in order to be cultured end to permit extraction of the plasmids incorporated according to the so-called “miniprep” procedure (17). The plasmid preparation from each recombinant colony was cut with a suitable restriction enzyme and analysed on agarose gel. Plasmids possessing an insert detected under UV light after staining the gel with ethidium bromide were selected for sequencing of the insert, after hybridization with a primer complementary to the Sp6 promoter present on the cloning plasmid of the TA cloning™ kit. The reaction prior to sequencing was then performed according to the method recommended for the use of the sequencing kit “Prism ready reaction kit dye deoxyterminator cycle sequencing kit” (Applied Biosystems, ref. 401384), and automatic sequencing was carried out with an Applied Biosystems “Automatic Sequencer, model 373 A” apparatus according to the manufacturer's instructions.

[0197] Discriminating analysis on the computerized data banks of the sequences cloned from the DNA fragments present in the reaction mixture enabled a retroviral type sequence to be revealed. The corresponding clone PSJ17 was completely sequenced, and the sequence obtained, presented in FIG. 6 and identified by SEQ ID NO:9, was analysed using the “Geneworks®” software on the updated “GenBank™” data banks. An identical sequence already described could not be found by analysis of the data banks. Only a partial homology with some known retroviral elements was to be found. The most useful relative homology relates to an endogenous retrovirus designated ERV-9, or HSERV-9, according to the references (18).

Example 4

PCR Amplification of the Nucleic Acid Sequence Contained Between the 5′ Region Defined by the Clone “POL MSRV-1B” and the 3′ Region Defined by the Clone PSJ17

[0198] Five oligonucleotides, M001, M002-A, M003-BCD, P004 and P005, were defined in order to amplify the RNA originating from purified POL-2 virions. Control reactions were performed so as to check for the presence of contaminants (reaction with water). The amplification consists of an RT-PCR step according to the protocol described in Example 2, followed by a “nested” PCR according to the PCR protocol described in the document EP-A-0,569,272. In the first RT-PCR cycle, the primers M001 and P004 or P005 are used. In the second PCR cycle, the primers M002-A or M003-BCI) and the primer P004 are used. The primers are positioned as follows:

1 M002-A M003-BCD M001 P004 P005 RNAPOL-2<--------------> <-----------------------> pol MSRV-1B PSJ17

[0199] Their composition is:

[0200] primer M001: CGTCITICCICAIGG (SEQ ID NO:20)

[0201] primer M002-A: TTAGGGATAGCCCTCATCTCT (SEQ ID NO:21)

[0202] primer M003-BCD: TCAGGGATAGCCCCCATCTAT (SEQ ID NO:22)

[0203] primer P004: ACCCTTTGCCACTACATCAATTT (SEQ ID NO:23)

[0204] primer P005: GCGTAAGGACTCCTAGAGCTATT (SEQ ID NO:24)

[0205] The “nested” amplification product obtained, and designated M003-P004, is presented in FIG. 7, and corresponds to the sequence SEQ ID NO:8.

Example 5

Amplification and Cloning of a Portion of the MSRV-1 Retroviral Genome Using a Sequence Already Identified, in a Sample of Virus Purified at the Peak of Reverse Transcriptase Activity

[0206] A PCR technique derived from the technique published by Frohman (19) was used. The technique derived makes it possible, using a specific primer at the 3′ end of the genome to be amplified, to elongate the sequence towards the 5′ region of the genome to be analyzed. This technical variant is described in the documentation of the firm “Clontech Laboratories Inc.”, (Palo-Alto Calif., USA) supplied with its product “5′-AnpliFINDER™ RACE Kit”, which was used on a fraction of virion purified as described above.

[0207] The specific 3′ primers used in the kit protocol for the synthesis of the cDNA and the PCR amplification are, respectively, complementary to the following MSRV-1 sequences:

[0208] cDNA: TCATCCATGTACCGAAGG (SEQ ID NO:25)

[0209] amplification: ATGGGGTTCCCAAGTTCCCT (SEQ ID NO:26)

[0210] The products originating from the PCR were obtained after purification on agarose gel according to conventional methods (17), and then resuspended in 10 μl of distilled water. Since one of the properties of Taq polymerase consists in adding an adenine at the 3′ end of each of the two DNA strands, the DNA obtained was inserted directly into a plasmid using the TA Cloning™ kit (British Biotechnology). The 2 μl of DNA solution were mixed with 5 ml of sterile distilled water, 1 μl of a 10-fold concentrated ligation buffer “10×LIGATION BUFFER”, 2 μl of “pCR™ VECTOR” (25 ng/ml) and 1 μl of “TA DNA LIGASE”. This mixture was incubated overnight at 12° C. The following steps were carried out according to the instructions of the TA Cloning™ kit (British Biotechnology). At the end of the procedure, the white colonies of recombinant bacteria (white) were picked out in order to be cultured and to permit extraction of the plasmids incorporated according to the so-called “miniprep” procedure (17). The plasmid preparation from each recombinant colony was cut with a suitable restriction enzyme and analyzed on agarose gel. Plasmids possessing an insert detected under UV light after staining the gel with ethidium bromide were selected for sequencing of the insert, after hybridization with a primer complementary to the Sp6 promoter present on the cloning plasmid of the TA Cloning™ Kit. The reaction prior to sequencing was then performed according to the method recommended for the use of the sequencing kit “Prism ready reaction kit dye deoxyterminator cycle sequencing kit” (Applied Biosystems, ref. 401384), and automatic sequencing was carried out with an Applied Biosystems “Automatic Sequencer model 373 A” apparatus according to the manufacturer's instructions.

[0211] This technique was applied first to two fractions of virion purified as described below on sucrose from the “POL-2” isolate produced by the PLI-2 line on the one hand, and from the MS7PG isolate produced by the LM7PC line on the other hand. The culture supernatants are collected twice weekly, precentrifuged at 10,000 rpm for 30 minutes to remove cell debris and then frozen at −80° C. or used as they are for the following steps. The fresh or thawed supernatants are centrifuged on a cushion of 30% glycerol-PBS at 100,000 g (or 30,000 rpm in a type 45 T LKB-HITACHI rotor) for 2 h at 4° C. After removal of the supernatant, the sedimented pellet is taken up in a small volume of PBS and constitutes the fraction of concentrated but unpurified virions. The concentrated virus is then applied to a sucrose gradient in sterile PBS buffer (15 to 50% weight/weight) and ultracentrifuged at 35,000 rpm (100,000 g) for 12 h at +4° C. in a swing-out rotor. 10 fractions are collected, and 20 ml are withdrawn from each fraction after homogenization to assay the reverse transcriptase activity therein according to the technique described by H. Perron (3). The fractions containing the peak of “LM7-like” RT activity are then diluted in sterile PBS buffer and ultra- centrifuged for one hour at 35,000 rpm (100,000 g) to sediment the viral particles. The pellet of purified virion thereby obtained is then taken up in a small volume of a buffer which is appropriate for the extraction of RNA. The cDNA synthesis reaction mentioned above is carried out on this RNA extracted from purified extracellular virion. PCR amplification according to the technique mentioned above enabled the clone F1-11 to be obtained, whose sequence, identified by SEQ ID NO:2, is presented in FIG. 8.

[0212] This clone makes it possible to define, with the different clones previously sequenced, a region of considerable length (1.2 kb) representative of the “pol” gene of the MSRV-1 retrovirus, as presented in FIG. 9. This sequence, designated SEQ ID NO:1, is reconstituted from different clones overlapping one another at their ends, correcting the artefacts associated with the primers and with the amplification or cloning techniques which would artificially interrupt the reading frame of the whole. This sequence will be identified below under the designation “MSRV-1 pol* region”. Its degree of homology with the HSERV-9 sequence is shown in FIG. 12.

[0213] In FIG. 9, the potential reading frame with its translation into amino acids is presented below the nucleic acid sequence.

Example 6

Detection of Specific MSRV-1 and MSRV-2 Sequences in Different Samples of Plasma Originating from Patients Suffering from MS or from Controls

[0214] A PCR technique was used to detect the MSRV-1 and MSRV-2 genomes in plasmas obtained after taking blood samples from patients suffering from MS and from non-MS controls onto EDTA.

[0215] Extraction of the RNAs from plasma was performed according to the technique described by P. Chomzynski (20), after adding one volume of buffer containing guanidinium thiocyanate to 1 ml of plasma stored frozen at −80° C. after collection.

[0216] For MSRV-2, the PCR was performed under the same conditions and with the following primers:

[0217] 5′ primer, identified by SEQ ID NO:14

[0218] 5′ GTAGTTCGATGTAGAAAGCG 3′;

[0219] 3′ primer, identified by SEQ ID NO:15

[0220] 5′ GCATCCGGCAACTGCACG 3′.

[0221] However, similar results were also obtained with the following PCR primers in two successive amplifications by “nested” PCR on samples of nucleic acids not treated with DNase.

[0222] The primers used for this first step of 40 cycles with a hybridization temperature of 48° C. are the following:

[0223] 5′ primer, identified by SEQ ID NO:27

[0224] 5′ GCCGATATCACCCGCCATGG 3′, corresponding to a 5′ MSRV-2 PCR primer, for a first PCR on samples from patients,

[0225] 3′ primer, identified by SEQ ID NO:28

[0226] 5′ GCATCCGGCAACTGCACG 3′, corresponding to a 3′ MSRV-2 PCR primer, for a first PCR on samples from patients.

[0227] After this step, 10 ml of the amplification product are taken and used to carry out a second, so-called “nested” PCR amplification with primers located within the region already amplified. This second step takes place over 35 cycles, with a primer hybridization (“annealing” ) temperature of 50° C. The reaction volume is 100 ml.

[0228] The primers used for this second step are the following:

[0229] 5′ primer, identified by SEQ ID NO:29

[0230] 5′ CGCGATGCTGGTTGGAGAGC 3′, corresponding to a 5′ MSRV-2 PCR primer, for a nested PCR on samples from patients,

[0231] 3′ primer, identified by SEQ ID NO:30

[0232] 5′ TCTCCACTCCGAATATTCCG 3′, corresponding to a 3′ MSRV-2 PCR primer, for a nested PCR on samples from patients.

[0233] For MSRV-1, the amplification was performed in two steps. Furthermore, the nucleic acid sample is treated beforehand with DNase, and a control PCR without R1F (AMV reverse transcriptase) is performed on the two amplification steps so as to verify that the RT-PCR amplification comes exclusively from the MSRV- 1 RNA. In the event of a positive control without RT, the initial aliquot sample of RNA is again treated with DNase and amplified again.

[0234] The protocol for treatment with DNase lacking RNAse activity is as follows: the extracted RNA is aliquoted in the presence of “RNAse inhibitor” (Boehringer-Mannheim) in water treated with DEPC at a final concentration of 1 mg in 10 ml; to these 10 ml, 1 ml of “RNAse-free DNAse” (Boehringer-Mannheim) and 1.2 ml of pH 5 buffer containing 0.1 M/l sodium acetate and 5 nM/l MgSO4 is added; the mixture is incubated for 15 min at 20° C. and brought to 95° C. for 1.5 min in a “thermocycler”.

[0235] The first MSRV-1 RT-PCR step is performed according to a variant of the RNA amplification method as described in Patent Application No. EP-A-0,569,272. In particular, the cDNA synthesis step is performed at 42° C. for one hour; the PCR amplification takes place over 40 cycles, with a primer hybridization (“annealing”) temperature of 53° C. The reaction volume is 100 μl.

[0236] The primers used for this first step are the following:

[0237] 5′ primer, identified by SEQ ID NO:16

[0238] 5′ AGGAGTAAGGAAACCCAACGGAC 3′;

[0239] 3′ primer, identified by SEQ ID NO:17

[0240] 5′ TAAGAGTTGCACAAGTGCG 3′.

[0241] After this step, 10 ml of the amplification product are taken and used to carry out a second, so-called “nested” PCR amplification with primers located within the region already amplified. This second step takes place over 35 cycles, with a primer hybridization (“annealing”) temperature of 53° C. The reaction volume is 100 μl.

[0242] The primers used for this second step are the following:

[0243] 5′ primer, identified by SEQ ID NO:18

[0244] 5“TCAGGGATAGCCCCCATCTAT 3′;

[0245] 3′ primer, identified by SEQ ID NO:19

[0246] 5” AACCCTTTGCCACTACATCAATTT 3′.

[0247]
FIGS. 10 and 11 present the results of PCR in the form of photographs under ultraviolet light of ethidium bromide-impregnated agarose gels, in which an electrophoresis of the PCR amplification products applied separately to the different wells was performed.

[0248] The top photograph (FIG. 10) shows the result of specific MSRV-2 amplification.

[0249] Well number 8 contains a mixture of DNA molecular weight markers, and wells 1 to 7 represent, in order, the products amplified from the total RNAs of plasmas originating from 4 healthy controls free from MS (wells 1 to 4) and from 3 patients suffering from MS at different stages of the disease (wells 5 to 7).

[0250] In this series, MSRV-2 nucleic acid material is detected in the plasma of one case of MS out of the 3 tested, and in none of the 4 control plasmas. Other results obtained on more extensive series confirm these results.

[0251] The bottom photograph (FIG. 11) shows the result of specific amplification by MSRV-1 “nested” RT-PCR:

[0252] well No. 1 contains the PCR product produced with water alone, without the addition of AMV reverse transcriptase; well No. 2 contains the PCR product produced with water alone, with the addition of AMV reverse transcriptase; well number 3 contains a mixture of DNA molecular weight markers; wells 4 to 13 contain, in order, the products amplified from the total RNAs extracted from sucrose gradient fractions (collected in a downward direction), on which gradient a pellet of virion originating from a, supernatant of a culture infected with MSRV-1 and MSRV-2 was centrifuged to equilibrium according to the protocol described by H. Perron (13); to well 14 nothing, was applied; to wells 15 to 17, the amplified products of RNA extracted from plasmas originating from 3 different patients suffering from MS at different stages of the disease were applied.

[0253] The MSRV-1 retroviral genome is indeed to be found in the sucrose gradient fraction containing the peak of reverse transcriptase activity measured according to the technique described by H. Perron (3), with a very strong intensity (fraction 5 of the gradient, placed in well No. 8). A slight amplification has taken place in the first fraction (well No. 4), probably corresponding to RNA released by lysed particles which floated at the surface of the gradient; similarly, aggregated debris has sedimented in the last fraction (tube bottom), carrying with it a few copies of the MSRV-1 genome which have given rise to an amplification of low intensity.

[0254] Of the 3 MS plasmas tested in this series, MSRV-1 RNA turned up in one case, producing a very intense amplification (well No. 17).

[0255] In this series, the MSRV-1 retroviral RNA genome, probably corresponding to particles of extracellular virus present in the plasma in extremely small numbers, was detected by “nested” RT-PCR in one case of MS out of the 3 tested. Other results obtained on more extensive series confirm these results.

[0256] Furthermore, the specificity of the sequences amplified by these PCR techniques may be verified and evaluated by the “ELOSA” technique as described by F. Mallet (21) and in the document FR-A-2,663,040.

[0257] For MSRV-1, the products of the nested PCR described above may be tested in two ELOSA systems enabling a consensus A and a consensus B+C+D of MSRV-1 to be detected separately, corresponding to the subfamilies described in Example 1 and FIGS. 1 and 2. In effect, the sequences closely resembling the consensus B+C+D are to be found essentially in the RNA samples originating from MSRV-1 viriotis purified from cultures or amplified in extracellular biological fluids of MS patients, whereas the sequences closely resembling the consensus A are essentially to be found in normal human cellular DNA.

[0258] The ELOSA/MSRV-1 system for the capture and specific hybridization of the PCR products of the subfamily A uses a capture oligonucleotide cpV1A with an amine bond at t he 5′ end and a biotinylated detection oligonucleotide dpV1A having as their sequence, respectively:

[0259] cpV1A identified by SEQ ID NO:31

[0260] 5′ GATCTAGGCCACTTCTCAGGTCCAGS 3′, corresponding to the ELOSA capture oligonucleotide for the products of MSRV-1 nested PCR performed with the primers identified by SEQ ID NO:16 and SEQ ID NO:17, optionally followed by amplification with the primers identified by SEQ ID NO:18 and SEQ ID NO:19 on samples from patients;

[0261] dpV1A identified by SEQ ID NO:32;

[0262] 5′ CATCTITTTGGICAGGCAITAGC 3′, corresponding to the ELOSA capture oligonucleotide for the subfamily A of the products of MSRV-1 “nested” PC R performed with the primers identified by SEQ ID NO:16 and SEQ ID NO:17, optionally followed by amplification with the primers identified by SEQ ID NO:18 and SEQ ID NO:19 on samples from patients.

[0263] The ELOSA/MSRV-1 system for the capture and specific hybridization of the PCR products of the subfamily B+C+D uses the same biotinylated detection oligonucleotide dpV1A and a capture oligonucleotide cpV1B with an amine bond at the 5′ end having as its sequence:

[0264] dpV1B identified by SEQ ID NO:33

[0265] 5′ CTTGAGCCAGTTCTCATACCTGGA 3′, corresponding to the ELOSA capture oligonucleotide for the subfamily B+C+D of the products of MSRV-1 “nested” PCR performed with the primers identified by SEQ ID NO:16 and SEQ ID NO:17, optionally followed by amplification with the primers identified by SEQ ID NO:18 and SEQ ID NO:19 on samples from patients.

[0266] This ELOSA detection system enabled it to be verified that none of the PCR products thus amplified from DNase-treated plasmas of MS patients contained a sequence of the subfamily A, and that all were positive with the consensus of the subfamilies B, C and D.

[0267] For MSRV-2, a similar ELOSA technique was evaluated on isolates originating from infected cell cultures, using the following PCR amplification primers,

[0268] 5′ primer, identified by SEQ ID NO:34

[0269] 5′ AGTGYTRCCMCARGGCGCTGAA 3′, corresponding to a 5′ MSRV-2 PCR primer, for PCR on samples from cultures,

[0270] 3′ primer, identified by SEQ ID NO:35

[0271] 5′ GMGGCCAGCAGSAKGTCATCCA 3′, corresponding to a 3′ MSRV-2 PCR primer, for PCR on samples from cultures,

[0272] and the capture oligonucleotides with an amine bond at the 5′ end cpV2 and the biotinylated detection oligonucleotide dpV2 having as their respective sequences:

[0273] cpV2 identified by SEQ ID NO:36

[0274] 5 GGATGCCGCCTATAGCCTCTAC 3′, corresponding to an ELOSA capture oligonucleotide for the products of MSRV-2 PCR performed with the primers SEQ ID NO:34 and SEQ ID NO:35, or optionally with the degenerate primers defined by Shih (12).

[0275] dpV2 identified by SEQ ID NO:37

[0276] 5′ AAGCCTATCGCGTGCAGTTGCC 3′, corresponding to an ELOSA detection oligonucleotide for the products of MSRV-2 PCR performed with the primers SEQ ID NO:34 and SEQ ID NO:35, or optionally with the degenerate primers defined by Shih (12)

[0277] This PCR amplification system with a pair of primers different from those which were described previously for amplification on the samples from patients made it possible to confirm the infection with MSRV-2 of in vitro cultures and of samples of nucleic acids used for the molecular biology studies.

[0278] All things considered, the first results of PCR detection of the genome of pathogenic and/or infective agents show that it is possible that free “virus” may circulate in the blood stream of patients in an acute, virulent phase, outside the nervous system. This is compatible with the almost invariable presence of “gaps” in the blood-brain barrier of patients in an active phase of MS.

Example 7

Obtaining Sequences of the “env” Gene of the MSRV-1 Retroviral Genome

[0279] As has already been described in Example 5, a PCR technique derived from the technique published by Frohman (19) was used. The technique derived makes it possible, using a specific primer at the 3′ end of the genome to be amplified, to elongate the sequence towards the 5′ region of the genome to be analysed. This technical variant is described in the documentation of “Clontech Laboratories Inc., (Palo-Alto Calif., USA) supplied with its product 5′-AmpliFINDER™ RACE Kit”, which was used on a fraction of virion purified as described above.

[0280] In order to carry out an amplification of the 3′ region of the MSRV-1 retroviral genome encompassing the region of the “env” gene, a study was carried out to determine a consensus sequence in the LTR regions of the same type as those of the defective endogenous retrovirus HSERV-9 (18, 24), with which the MSRV-1 retrovirus displays partial homologies.

[0281] The same specific 3′ primer was used in the kit protocol for the synthesis of the cDNA and the PCR amplification; its sequence is as follows:

[0282] GTGCTGATTGGTGTATTTACAATCC (SEQ ID NO 45)

[0283] Synthesis of the complementary DNA (cDNA) and unidirectional PCR amplification with the above primer were carried out in one step according to the method described in Patent EP-A-0,569,272.

[0284] The products originating from the PCR were extracted after purification of agarose gel according to conventional methods (17), and then resuspended in 10 μl of distilled water. Since one of the properties of Taq polymerase consists in adding an adenine at the 3′ end of each of the two DNA strands, the DNA obtained was inserted directly into a plasmid using the TA Cloning™ kit (British Biotechnology). The 2 μl of DNA solution were mixed with 5 μl of sterile distilled water, 1 gl of a 10-fold concentrated ligation buffer “10×LIGATION BUFFER”, 2 μl of “pCR™ VECTOR” (25 ng/ml) and 1 μl of “TA DNA LIGASE”. This mixture was incubated overnight at 12° C. The following steps were carried out according to the instructions of the TA Cloning™ kit (British Biotechnology). At the end of the procedure, the white colonies of recombinant bacteria (white) were picked out in order to be cultured and to permit extraction of the plasmids incorporated according to the so-called “miniprep” procedure (17). The plasmid preparation from each recombinant colony was cut with a suitable restriction enzyme and analyzed on agarose gel. Plasmids possessing an insert detected under UV light after staining the gel with ethidium bromide were selected for sequencing of the insert, after hybridization with a primer complementary to the Sp6 promoter present on the cloning plasmid of the TA Cloning™ Kit. The reaction prior to sequencing was then performed according to the method recommended for the use of the sequencing kit “Prism ready reaction kit dye deoxyterminator cycle sequencing kit” (Applied Biosystems, ref. 401384), and automatic sequencing was carried out with an Applied Biosystems “automatic sequencer, model 373 A” apparatus according to the manufacturer's instructions.

[0285] This technical approach was applied to a sample of virion concentrated as described below from a mixture of culture supernatants produced by B lymphoblastoid lines such as are described in Example 2, established from lymphocytes of patients suffering from MS and possessing reverse transcriptase activity which is detectable according to the technique described by Perron et al. (3): the culture supernatants are collected twice weekly, precentrifuged at 10,000 rpm for 30 minutes to remove cell debris and then frozen at −80° C. or used as they are for the following steps. The fresh or thawed supernatants are centrifuged on a cushion of 30% glycerol-PBS a it 100,000 g for 2 h at 4° C. After removal of the supernatant, the sedimented pellet constitutes the sample of concentrated but unpurified virions. The pellet thereby obtained is then taken up in a small volume of an appropriate buffer for the extraction of RNA. The cDNA synthesis reaction mentioned above is carried out on this RNA extracted from concentrated extracellular virion.

[0286] RT-PCR amplification according to the technique mentioned above enabled the clone FBd3 to be obtained, whose sequence, identified by SEQ ID NO:46, is presented in FIG. 13.

[0287] In FIG. 14, the sequence homology between the clone FBd3 and the HSERV-9 retrolvirus is shown on the matrix chart by a continuous line for any partial homology greater than or equal to 65%. It can be seen that there are homologies in the flanking regions of the clone (with the pol gene at the 5′ end and with the env gene and then the LTR at the 3′ end), but that the internal region is totally divergent and does not display any homology, even weak, with the “env” gene of HSERV9. Furthermore, it is apparent that the clone FBd3 contains a longer “env” region than the one which is described for the defective endogenous HSERV-9; it may thus be seen that the internal divergent region constitutes an “insert” between the regions of partial homology with the HSERV-9 defective genes.

Example 8

Amplification, Cloning and Sequencing of the Region of the MSRV-1 Retroviral Genome Located Between the Clones PSJ17 and FBd3

[0288] Four oligonucleotides, F1, B4, F6 and B1, were defined for amplifying RNA originating from concentrated virions of the strains POL2 and MS7PG. Control reactions were performed so as to check for the presence of contaminants (reaction with water). The amplification consists of a first step of RT-PCR according to the protocol described in Patent Application EP-A-0,569,272, followed by a second step of PCR performed on 10 μl of product of the first step with primers internal to the amplified first region (“nested” PCR). In the first RT-PCR cycle, the primers F1 and B4 are used. In the second PCR cycle, the primers F6 and the primer B1 are used. The primers are positioned as follows:

2 F1 F6 B1 B4 RNAMSRV-1PSJ17 FBd3-----------------> <---------------------/----5′pol MSRV-1 3′pol MSRV-1 /5′env

[0289] Their composition is:

[0290] primer F1: TGATGTGAACGGCATACTCACTG (SEQ ID NO:47)

[0291] primer B4: CCCAGAGGTTAGGAACTCCCTTTC (SEQ ID NO 48)

[0292] primer F6: GCTAAAGGAGACTTGTGGTTGTCAG (SEQ ID NO 49)

[0293] primer B1: CAACATGGGCATTTCGGATTAG (SEQ ID NO 50)

[0294] The product of “nested” amplification obtained and designated “t pol” is presented in FIG. 15, and corresponds to the sequence SEQ ID NO:51.

Example 9

Obtaining New Sequences, Expressed as RNA in Cells in Culture Producing MSRV-1, and Comprising an “env” Region of the MSRV-1 Retroviral Genome

[0295] A library of cDNA was produced according to the procedure described by the manufacturer of the “cDNA synthesis module, cDNA rapid adaptator ligation module, cDNA rapid cloning module and lambda gt10 in vitro packaging module” kits (Amersham, ref RPN1256Y/Z, RPN1712, RPN1713, RPN1717, N334Z), from the messenger RNA extracted from cells of a B lymphoblastoid line such as is described in Example 2, established from the lymphocytes of a patient suffering from MS and possessing reverse transcriptase activity which is detectable according to the technique described by Perron et al. (3).

[0296] Oligonucleotides were defined for amplifying the cDNA cloned into the nucleic acid library between the 3′ region of the clone PSJ17 (pol) and the 5′(LTR) region of the clone FBd3. Control reactions were performed so as to check for the presence of contaminants (reaction with water). PCR reactions performed on the nucleic acids cloned into the library with different pairs of primers enabled a series of clones linking pol sequences to the MSRV-1 type env or LTR sequences to be amplified.

[0297] Two clones are representative of the sequences obtained in the cellular cDNA library:

[0298] the clone JLBc1, whose sequence SEQ ID NO:52 is presented in FIG. 16;

[0299] the clone JLBc2, whose sequence SEQ ID NO:53 is presented in FIG. 17.

[0300] The sequences of the clones JLBc1 and JLBc2 are homologous to that of the clone FBd3, as is apparent in FIGS. 18 and 19. The homology between the clone JLBc1 and the clone JLBc2 is shown in FIG. 20.

[0301] The homologies between the clones JLBc1 and JLBc2 on the one hand and the HSERV9 sequence on the other hand are presented, respectively, in FIGS. 21 and 22.

[0302] It will be noted that the region of homology between JLB1, JLB2 and FBd3 comprises, with a few sequence and size variations of the “insert”, the additional sequence absent (“inserted”) in the HSERV-9 env sequence, as described in Example 8.

[0303] It will also be noted that the cloned “pol” region is very homologous to HSERV-9, does not possess a reading frame (bearing in mind the sequence errors induced by the techniques used, including even the automatic sequencer) and diverges from the MSRV-1 sequences obtained from virions. In view of the fact that these sequences were cloned from the RNA of cells expressing MSRV-1 particles, it is probable that they originate from endogenous retroviral elements related to the ERV9 family; this is all the more likely for the fact that the pol and env genes are present on the same ITNA which is clearly not the MSRV-1 genomic RNA. Some of these ERV9 elements possess functional LTRs which can be activated by replicative viruses coding for homologous or heterologous transactivators. Under these conditions, the relationship between MSRV-1 and HSERV-9 makes probable the transactivation of the defective (or otherwise) endogenous ERV9 elements by homologous, or even identical, MSRV-1 transactivating proteins.

[0304] Such a phenomenon may induce a viral interference between the expression of MSRV-1 and the related endogenous elements. Such an interference generally leads to a so-called “defective-interfering” expression, some features of which were to be found in the MSRV-1-infected cultures studied. Furthermore, such a phenomenon does not lack generation of the expression of polypeptides, or even of endogenous retroviral proteins which are not necessarily tolerated by the immune system. Such a scheme of aberrant expression of endogenous elements related to MSRV-1 and induced by the latter is liable to multiply the aberrant antigens, and hence to contribute to the induction of autoimmune processes such as are observed in MS.

[0305] It is, however, essential to note that the clones JLBc1 and JLBc2 differ from the ERV9 or HSERV9 sequence already described, in that they possess a longer env region comprising an additional region totally divergent from ERV9. Their kinship with the endogenous ERV9 family may hence be defined, but they clearly constitute novel elements never hitherto described. In effect, interrogation of the data banks of nucleic acid sequences available in version No. 15 (1995) of the “Entrez” software (NCBI, NIH, Bethesda, USA) did not enable a known homologous sequence in the env region of these clones to be identified.

Example 10

Obtaining Sequences Located in the 5′ pol And 3′ gag Region of the MSRV-1 Retroviral Genome

[0306] As has already been described in Example 5, a PCR technique derived from the technique published by Frohman (19) was used. The technique derived makes it possible, using a specific primer at the 3′ end of the genome to be amplified, to elongate the sequence towards the 5′ region of the genome to be analyzed. This technical variant is described in the documentation of the firm Clontech Laboratories Inc., (Palo-Alto Calif., USA) supplied with its product “5′-AmpliFINDER™ RACE Kit”, which was used on a fraction of virion purified as described above.

[0307] In order to carry out an amplification of the 5′ region of the MSRV-1 retroviral genome starting from the pol sequence already sequenced (clone F11-1) and extending towards the gag gene, MSRV-1 specific primers were defined.

[0308] The specific 3′ primers used in the kit protocol for the synthesis of the cDNA and the PCR amplification are, respectively, complementary to the following MSRV-1 sequences:

[0309] cDNA: (SEQ ID NO:54)

[0310] CCTGAGTTCTTGCACTAACCC

[0311] amplification: (SEQ ID NO:55)

[0312] GTCCGTTGGGTTTCCTTACTCCT

[0313] The products originating from the PCR were extracted after purification on agarose gel according to conventional methods (17), and then resuspended in 10 ml of distilled water. Since one of the properties of Taq polymerase consists in adding an adenine at the 3′ end of each of the two DNA strands, the DNA obtained was inserted directly into a plasmid using the TA Cloning™ kit (British Biotechnology). The 2 ml of DNA solution were mixed with 5 ml of sterile distilled water, 1 ml of a 10-fold concentrated ligation buffer “10× LIGATION BUFFER”, 2 ml of “pCR™ VECTOR” (25 ng/ml) and 1 ml of “TA DNA LIGASE”. This mixture was incubated overnight at 12° C. The following steps were carried out according to the instructions of the TA Cloning® kit (British Biotechnology). At the end of the procedure, the white colonies of recombinant bacteria (white) were picked out in order to be cultured and to permit extraction of the plasmids incorporated according to the so-called “miniprep” procedure (17). The plasmid preparation from each recombinant colony was cut with a suitable restriction enzyme and analyzed on agarose gel. Plasmids possessing an insert detected under UV light after staining the gel with ethidium bromide were selected for sequencing of the insert, after hybridization with a primer complementary to the Sp6 promoter present on the cloning plasmid of the TA Cloning™ Kit. The reaction prior to sequencing was then performed according to the method recommended for the use of the sequencing kit “Prism ready reaction kit dye deoxyterminator cycle sequencing kit” (Applied Biosystems, ref. 401384), and automatic sequencing was carried out with an Applied Biosystems “automatic sequencer model 373 A” apparatus according to the manufacturer's instructions.

[0314] This technical approach was applied to a sample of virion concentrated as described below from a mixture of culture supernatants produced by B lymphoblastoid lines such as are described in Example 2, established from lymphocytes of patients suffering from MS and possessing reverse transcriptase activity which is detectable according to the technique described by Perron et al. (3): the culture supernatants are collected twice weekly, precentrifuged at 10,000 rpm for 30 minutes to remove cell debris and then frozen at −80° C. or used as they are for the following steps. The fresh or thawed supernatants are centrifuged on a cushion of 30% glycerol-PBS at 100,000 g for 2 h at 4° C. After removal of the supernatant, the sedimented pellet constitutes the sample of concentrated but unpurified virions. The pellet thereby obtained is then taken up in a small volume of an appropriate buffer for the extraction of RNA. The cDNA synthesis reaction mentioned above is carried out on this RNA extracted from concentrated extracellular virion.

[0315] RT-PCR amplification according to the technique mentioned above enabled the clone GM3 to be obtained, whose sequence, identified by SEQ ID NO 56, is presented in FIG. 23.

[0316] In FIG. 24, the sequence homology between the clone GMP3 and the HSERV-9 retrovirus is shown on the matrix chart by a continuous line, for any partial homology greater than or equal to 65%.

[0317] In summary, FIG. 25 shows the localization of the different clones studied above, relative to the known ERV9 genome. In FIG. 25, since the MSRV-1 env region is longer than the reference ERV9 env gene, the additional region is shown above the point of insertion according to a “V”, on the understanding that the inserted material displays a sequence and size variability between the clones shown (JLBc1, JLBc2, FBd3). And FIG. 26 shows the position of different clones studied in the MSRV-1 pol* region.

[0318] By means of the clone GM3 described above, a possible reading frame could be defined, covering the whole of the pol gene, referenced according to SEQ ID NO:57, shown in the successive FIGS. 27a to 27c.

Example 11

Detection of Anti-MSRV-1 Specific Antibodies in Human Serum

[0319] Identification of the sequence of the pol gene of the MSRV-1 retrovirus and of an open reading frame of this gene enabled the amino acid sequence SEQ ID NO:39 of a region of the said gene, referenced SEQ ID NO:40, to be determined (see FIG. 28).

[0320] Different synthetic peptides corresponding to fragments of the protein sequence of MSRV-1 reverse transcriptase encoded by the pol gene were tested for their antigenic specificity with respect to sera of patients suffering from MS and of healthy controls.

[0321] The peptides were synthesized chemically by solid-phase synthesis according to the Merrifield technique (Barany G, and Merrifielsd R. B, 1980, In the Peptides, 2, 1-284, Gross E and Meienhofer J, Eds., Academic Press, New York). The practical details are those described below.

[0322] a) Peptide Synthesis

[0323] The peptides were synthesized on a phenylacetamidomethyl (PAM)/polystyrene/divinylbenzene resin (Applied Biosystems, Inc. Foster City, Calif.), using an “Applied Biosystems 430A” automatic synthesizer. The amino acids are coupled in the form of hydroxybenzotriazole (HOBT) esters. The amino acids used are obtained from. Novabiochem (Läuflerlfingen, Switzerland) or Bachem (Bubendorf, Switzerland).

[0324] The chemical synthesis was performed using a double coupling protocol with N-methylpyrrolidone (NMP) as solvent. The peptides were cut from the resin, as well as the side-chain protective groups, simultaneously, using hydrofluoric acid (HF) in a suitable apparatus (type I cleavage apparatus, Peptide Institute, Osaka, Japan).

[0325] For 1 g of peptidyl resin, 10 ml of HF, 1 ml of anisole and 1 ml of dimethyl sulphide 5DMS are used. The mixture is stirred for 45 minutes at −2° C. The HF is then evaporated off under vacuum. After intensive washes with ether, the peptide is eluted from the resin with 10% acetic acid and then lyophilized.

[0326] The peptides are purified by preparative high performance liquid chromatography on a VYDAC C18 type column (250×21 mm) (The Separation Group, Hesperia, Calif., USA). Elution is carried out with an acetonitrile gradient at a flow rate of 22 ml/min. The fractions collected are monitored by an elution under isocratic conditions on a VYDACr C18 analytical column (250×4.6 mm) at a flow rate of 1 ml/mia. Fractions having the same retention time are pooled and lyophilized. The preponderant fraction is then analysed by analytical high performance liquid chromatography with the system described above. The peptide which is considered to be of acceptable purity manifests itself in a single peak representing not less than 95% of the chromatogram.

[0327] The purified peptides are then analyzed with the object of monitoring their amino acid composition, using an Applied Biosystems 420H automatic amino acid analyzer. Measurement of the (average) chemical molecular mass of the peptides is obtained using LSIMS mass spectrometry in the positive ion mode on a VG. ZAB.ZSEQ double focusing instrument connected to a DEC-VAX 2000 acquisition system (VG aralytical Ltd, Manchester, England).

[0328] The reactivity of the different peptides was tested against sera of patients suffering from MS and against sera of healthy controls. This enabled a peptide designated POL2B to be selected, whose sequence is shown in FIG. 28 in the identifier SEQ ID NO:39, below, encoded by the pol gene of MSRV-1 (nucleotides 181 to 330).

[0329] b) Antigenic Properties

[0330] The antigenic properties of the POL2B peptide were demonstrated according to the ELISA protocol described below.

[0331] The lyophilized POL2B peptide was dissolved in sterile distilled water at a concentration of 1 mg/ml. This stock solution was aliquoted and kept at +4° C. for use over a fortnight, or frozen at −20° C. for use within 2 months. An aliquot is diluted in PBS (phosphate buffered saline) solution so as to obtain a final peptide concentration of 1 micrograin/ml. 100 microlitres of this dilution are placed in each well of microtitration plates (“high-binding” plastic, COSTAR ref: 3590). The plates are covered with a “plate-sealer” type adhesive and kept overnight at +4° C. for the phase of adsorption of the peptide to the plastic. The adhesive is removed and the plates are washed three times with a volume of 300 microliters of a solution A (1×PBS, 0.05% Tween 20r), then inverted over an absorbent tissue. The plates thus drained are filled with 200 microliters per well of a solution B (solution A +10% of goat serum), then covered with an adhesive and incubated for 45 minutes to 1 hour at 37° C. The plates are then washed three times with the solution A as described above.

[0332] The test serum samples are diluted beforehand to {fraction (1/50)} in the solution B, and 100 microLiters of each dilute test serum are placed in the wells of each micro-titration plate. A negative control is placed in one well of each plate, in the form of 100 microliters of buffer B. The plates covered with an adhesive are then incubated for 1 to 3 hours al. 37° C. The plates are then washed three times with the solution A as described above. In parallel, a peroxidase-labelled goat antibody directed against human IgG (Sigma Immunochemicals ref. A6029) or IgM (Cappel ref. 55228) is diluted in the solution B (dilution {fraction (1/5000)} for the anti-IgG and {fraction (1/1000)} for the anti-IgM). 100 microliters of the appropriate dilution of the labelled antibody are then placed in each well of the microtitration plates, and the plates covered with an adhesive are incubated for 1 to 2 hours at 37° C. A further washing of the plates is then performed as described above. In parallel, the peroxidase substrate is prepared according to the directions of the “Sigma fast OPD kit” (Sigma Immunochemicals, ref. P9187). 100 microliters of substrate solution are placed in each well, and the plates are placed protected from Light for 20 to 30 minutes at room temperature.

[0333] When the color reaction has stabilized, the plates are placed immediately in an ELISA plate spectrophotometric reader, and the optical density (OD) of each well is read at a wavelength of 492 nm. Alternatively, 30 microliters of 1N HCl are placed in each well to stop the reaction, and the plates are read in the spectrophotometer within 24 hours.

[0334] The serological samples are introduced in duplicate or in triplicate, and the optical density (OD) corresponding to the serum tested is calculated by taking the mean of the OD values obtained for the same sample at the same dilution.

[0335] The net OD of each serum corresponds to the mean OD of the serum minus the mean OD of the negative control (solution B: PBS, 0.05% Tween 20r, 10% goat serum).

[0336] c) Detection of Anti-MSRV-1 IgG Antibodies by ELISA

[0337] The technique described above was used with the POLB2 peptide to test for the presence of anti-MSRV-1 specific IgG antibodies in the serum of 29 patients for whom a definite or probable diagnosis of MS was established according to the criteria of Poser (23), and of 32 healthy controls (blood donors).

[0338] FIG. 29 shows the results for each serum tested with an anti-IgG antibody. Each. vertical bar represents the net optical density (OD at 492 nm) of a serum tested. The ordinate axis gives the net OD at the top of the vertical bars. The first 29 vertical bars lying to the left of the vertical broken line represent the sera of 29 cases of MS tested, and the 32 vertical bars lying to the right of the vertical broken line represent the sera of 32 healthy controls (blood donors).

[0339] The mean of the net OD values for the MS sera tested is 0.62. The diagram enables 5 controls to be revealed whose net OD rises above the grouped values of the control population. These values may represent the presence of specific IgGs in symptomless seropositive patients. Two methods were hence evaluated in order to determine the statistical threshold of positivity of the test.

[0340] The mean of the net OD values for the controls, including the controls with high net OD values, is 0.36. Without the 5 controls whose net OD values are greater than or equal to 0.5, the mean of the “negative” controls is 0.33. The standard deviation of the negative controls is 0.10. A theoretical threshold of positivity may be calculated according to the formula:

threshold value (mean of the net OD values of the seronegative controls)+(2 or 3×standard deviation of the net OD values of the seronegative controls).

[0341] In the first case, there are considered to be symptomless seropositives, and the threshold value is equal to 0.33+(2×0.10)=0.53. The negative results represent a non-specific “background” of the presence of antibodies directed specifically against an epitope of the peptide.

[0342] In the second case, if the set of controls consisting of blood donors in apparent good health is taken as a reference basis, without excluding the sera which are, on the face of it, seropositive, the standard deviation of the “non-MS controls” is 0.116. The threshold value then becomes 0.36+(2×0.116)=0.59.

[0343] According to this analysis, the test is specific for MS. In this respect, it is seen that the test is specific for MS, since, as shown in Table 1, no control has a net OD above this threshold. In fact, this result reflects the fact that the antibody titers in patients suffering from MS are, for the most part, higher than in healthy controls who have been in contact with MSRV-1.

3TABLE NO. 1MSCONTROLS0.6810.35151.04250.560.56750.35650.630.4490.5880.28250.6450.550.66350.520.5760.25350.77650.550.57450.510.5130.4260.43250.4510.72550.2270.8590.39050.64350.2650.57950.42950.86550.2910.6710.3470.5960.44950.6620.37250.6020.1810.5250.27250.530.4260.5650.19150.5170.2220.6070.3950.37050.340.3970.3070.43950.2190.4910.22650.2605MEAN0.620.33STD DEV0.140.10THRESHOLD VALUE0.53

[0344] In accordance with the first method of calculation, and as shown in FIG. 29 and in the corresponding Table 1, 26 of the 29 MS sera give a positive result (net OD greater than or equal to 0.50), indicating the presence of IgGs specifically directed against the POL2B peptide, hence against a portion of the reverse transcriptase enzyme of the MSRV-1 retrovirus encoded by its pol gene, and consequently against the MSRV-1 retrovirus. Thus, approximately 90% of the MS patients tested have reacted against an epitope carried by the POL2B peptide and possess circulating IgGs directed against the latter.

[0345] Five out of 32 blood donors in apparent good health show a positive result. Thus, it is apparent that approximately 15% of the symptomless population may have been in contact with an epitope carried by the POL2B peptide under conditions which have led to an active immunization which manifests itself in the persistence of specific serum IgGs. These conditions are compatible with an immunization against the MSRV-1 retrovirus reverse transcriptase during an infection with (and/or reactivation of) the MSRV-1 retrovirus. The absence of apparent neurological pathology recalling MS in these seropositive controls may indicate that they are healthy carriers and have eliminated an infectious virus after immunizing themselves, or that they constitute an at-risk population of chronic carriers. In effect, epidemiological data showing that a pathogenic agent present in the environment of regions of high prevalence of MS may be the cause of this disease imply that a fraction of the population free from MS has necessarily been in contact with such a pathogenic agent. It has been shown that the MSRV-1 retrovirus constitutes all or part of this “pathogenic agent” at the source of MS, and it is hence normal for controls taken from a healthy population to possess IgG type antibodies against components of the MSRV-1 retrovirus. Thus, the difference in seroprevalence between the MS and control populations is extremely significant: “chi-squared” test, p<0.001. These results hence point to an aetiopathogenic role of MSRV-1 in MS.

[0346] d) Detection of Anti-MSRV-1 IgM Antibodies by ELISA

[0347] The ELISA technique with the POL2B peptide was used to test for the presence of anti-MSRV-1 IgM specific antibodies in the serum of 36 patients for whom a definite or probable diagnosis of MS was established according to the criteria of Poser (23), and of 42 healthy controls (blood donors).

[0348]
FIG. 30 shows the results for each serum tested with an anti-IgM antibody. Each vertical bar represents the net optical density (OD at 492 nm) of a serum tested. The ordinate axis gives the net OD at the top of the vertical bars. The first 36 vertical bars lying to the left of the vertical line cutting the abscissa axis represent the sera of 36 cases of MS tested, and the vertical bars lying to the right of the vertical broken line represent the sera of 42 healthy controls (blood donors). The horizontal line drawn in the middle of the diagram represents a theoretical threshold defining the boundary of the positive results (in which the top of the bar lies above) and the negative results (in which the top of the bar lies below).

[0349] The mean of the net OD values for the MS cases tested is 0.19.

[0350] The mean of the net OD values for the controls is 0.09.

[0351] The standard deviation of the negative controls is 0.05.

[0352] In view of the small difference between the mean and the standard deviation of the controls, the threshold of theoretical positivity may be calculated according to the formula:

threshold value=(mean of the net OD values of the seronegative controls)+(3×standard deviation of the net OD values of the seronegative controls).

[0353] The threshold value is hence equal to 0.09+(3×0.05)=0.26; or, in practice, 0.25.

[0354] The negative results represent a non-specific “background” of the presence of antibodies directed specifically against an epitope of the peptide.

[0355] According to this analysis, and as shown in FIG. 30 and in the corresponding Table 2, the IgM test is specific for MS, since no control has a net OD above the threshold. Seven of the 36 MS sera produce a positive IgM result; now, a study of the clinical data reveals that these positive sera were taken during a first attack of MS or an acute attack in untreated patients. It is known that IgMs directed against pathogenic agents are produced during primary infections or during reactivations following a latency phase of the said pathogenic agent.

[0356] The difference in seroprevalence between the MS and control populations is extremely significant: “chi-squared” test, p<0.001.

[0357] These results point to an aetiopathogenic role of MSRV-1 in MS.

[0358] The detection of IgM and IgG antibodies against the POL2B peptide enables the course of an MSRV-1 infection and/or of the viral reactivation of MSRV-1 to be evaluated.

4TABLE NO. 2MSCONTROLS0.0640.2430.0870.110.0440.0980.1150.0280.0890.0940.0250.0380.0970.1760.1080.1460.0180.0490.2340.1610.2740.1130.2250.0790.3140.0930.5220.1270.3060.020.1430.0520.3750.0620.1420.0740.1570.0430.1680.0461.0510.0410.1040.130.1870.1530.0440.1070.0530.1780.1530.1140.070.0780.0330.1180.1040.1770.1870.0260.0440.0240.0530.0460.1530.1160.070.040.0330.0280.9730.0730.0080.0740.1410.2190.0470.017MEAN0.190.09STD. DEV.0.230.05THRESHOLD VALUE0.26

[0359] e) Search for Immunodominant Epitopes in the POL2B Peptide

[0360] In order to reduce the non-specific background and to optimize the detection of the responses of the anti-MSRV-1 antibodies, the synthesis of octapeptides, advancing in successive one amino acid steps, covering the whole of the sequence determined by POL2B, was carried out according to the protocol described below.

[0361] The chemical synthesis of overlapping octapeptides covering the amino acid sequence 61-110 shown in the identifier SEQ ID NO:39 was carried out on an activated cellulose membrane according to the technique of BERG et al. (1989. J. Ann. Chem. Soc., 111, 8024-8026) marketed by Cambridge Research Biochemicals under the trade name Spotscan. This technique permits the simultaneous synthesis of a large number of peptides and their analysis.

[0362] The synthesis is carried out with esterified amino acids in which the α-amino group is protected with an FMOC group (Nova Biochem) and the side-chain groups with protective groups such as trityl, t-butyl ester or t-butyl ether. The esterified amino acids are solubilized in N-methylpyrrolidone (NMP) at a concentration of 300 nM, and 0.9 ml are applied to spots of deposit of bromophenol blue. After incubation for 15 minutes, a further application of amino acids is carried out according to another 15-minute incubation. If the coupling between two amino acids has taken place correctly, a coloration modification (change from blue to yellow-green) is observed. After three washes in DMF, an acetylation step is performed with acetic anhydride. Next, the terminal amino groups of the peptides in the process of synthesis are deprotected with 20% pyridine in DMF. The spots of deposit are restained with a 1% solution of bromophenol blue in DMF, washed three times with methanol and dried. This set of operations constitutes one cycle of addition of an amino acid, and this cycle is repeated until the synthesis is complete. When all the amino acids have been added, the NH2-terminal group of the last amino acid is deprotected with 20% piperidine in DMF and acetylated with acetic anhydride. The groups protecting the side chain are removed with a dichloromethane/trifluoroacetic acid/triisobutylsilane (5 ml/5 ml/250 ml) mixture. The immunoreactivity of the peptides is then tested by ELISA.

[0363] After synthesis of the different octapeptides in duplicate on two different membranes, the latter are rinsed with methanol and washed in TBS (0.1M Tris pH 7.2), then incubated overnight at room temperature in a saturation buffer. After several washes in TBS-T (0.1M Tris pH 7.2-0.05% Tween 20), one membrane is incubated with a 1/50 dilution of a reference serum originating from a patient suffering from MS, and the other membrane with a 1/50 dilution of a pool of sera of healthy controls. The membranes are incubated for 4 hours at room temperature. After washes with TBS-T, a β-galactosidase-labelled anti-human immunoglobulin conjugate (marketed by Cambridge Research Biochemicals) is added at a dilution of 1/200, and the mixture is incubated for two hours at room temperature. After washes of the membranes with 0.05% TBS-T and PBS, the immunoreactivity in the different spots is visualized by adding 5-bromo-4-chloro-3-indolyl b-D-galactopyranoside in potassium. The intensity of coloration of the spots is estimated qualitatively with a relative value from 0 to 5 as shown in the attached FIGS. 31 to 33.

[0364] In this way, it is possible to determine two immunodominant regions at each end of the POL2B peptide, corresponding, respectively, to the amino acid sequences 65-75 (SEQ ID NO:41) and 92-109 (SEQ ID NO:42), according to FIG. 34, and lying, respectively, between the octapeptides Phe-Cys-Ile-Pro-Val-Arg-Pro-Asp (FCIPVRPD) and Arg-Pro-Asp-Ser-Gln-Phe-Leu-Phe (RPDSQFLF), and Thr-Val-Leu-Pro-Gln-Gly-Phe-Arg (TVLPQGFR) and Leu-Phe-Gly-Gln-Ala-Leu-Ala-Gln (LFGQALAQ), and a region which is less reactive but apparently more specific, since it does not produce any background with the control serum, represented by the octapeptides Leu-Phe-Ala-Phe-Glu-Asp-Pro-Leu (LFAFEDPL) (SEQ ID NO:43) and Phe-Ala-Phe-Glu-Asp-Pro-Leu-Asn (FAFEDPLN) (SEQ ID NO:44).

[0365] These regions make it possible to define new peptides which are more specific and more immunoreactive according to the usual techniques.

[0366] It is thus possible, as a result of the discoveries made and the methods developed by the inventors, to carry out a diagnosis of MSRV-1 infection and/or reactivation and to evaluate a therapy in MS on the basis of its efficacy in “negativing” the detection of these agents in the patients' biological fluids. Furthermore, early detection in individuals not yet displaying neurological signs of MS could make it possible to institute a treatment which would be all the more effective with respect to the subsequent clinical course for the fact that it would precede the lesion stage which corresponds to the onset of neurological disorders. Now, at the present time, a diagnosis of MS cannot be established before a symptomatology of neurological lesions has set in, and hence no treatment is instituted before the emergence of a clinical picture suggestive of lesions of the central nervous system which are already significant. The diagnosis of an MSRV-1 and/or MSRV-2 infection and/or reactivation in man is hence of decisive importance, and the present invention provides the means of doing this.

[0367] It is thus possible, apart from carrying out a diagnosis of MSRV-1 infection and/or reactivation, to evaluate a therapy in MS on the basis of its efficacy in “negativing” the detection of these agents in the patients' biological fluids.

Example 12

Obtaining a Clone LB19 Containing a Portion of the gag Gene of the MSRV-1 Retrovirus

[0368] A PCR technique derived from the technique published by Gonzalez-Quintial R et al. (19) and PLAZA et al. (25) was used. From the total RNAs extracted from a fraction of virion purified as described above, the cDNA was synthesized using a specific primer (SEQ ID No.64) at the 3′ end of the genome to be amplified, using EXPAND™ REVERSE TRANSCRIPTASE (BOEHRINGER MANNHEIM).

[0369] cDNA:

[0370] AAGGGGCATG GACGAGGTGG TGGCTTATTT (SEQ ID NO:65) (antisense)

[0371] After purification, a poly(G) tail was added at the 5′ end of the cDNA using the “Terminal transferases kit” marketed by the company Boehringer Mannheim, according to the manufacturer's protocol.

[0372] An anchoring PCR was carried out using the following 5′ and 3′ primers:

[0373] AGATCTGCAGCAATTCGATATCACCCCCCCCCCCCCC (SEQ ID No. 91) (sense),

[0374] and AAATGTCTGC GGCACCAATC TCCATGTT (SEQ ID No. 64) (antisense)

[0375] Next, a semi-nested anchoring PCR was carried out with the following 5′ and 3′ primers:

[0376] AGATCTGCAG AATTCGATAT CA (SEQ ID No.92) (sense), and

[0377] AAATGTCTGC GGCACCAATC TCCATGTT (SEQ ID No.64) (antisense)

[0378] The products originating from the PCR were purified after purification on agarose gel according to conventional methods (17), and then resuspended in 10 microliters of distilled water. Since one of the properties of Taq polymerase consists in adding an adenine at the 3′ end of each of the two DNA strands, the DNA obtained was inserted directly into a plasmid using the TA Cloning™ kit (British Biotechnology). The 2 μl of DNA solution were mixed with 5 μl of sterile distilled water, 1 μl of 10-fold concentrated ligation buffer “10× LIGATION BUFFER”, 2 μl of “pCR™ VECTOR” (25 ng/μl) and 1 μl of “T4 DNA LIGASE”. This mixture was incubated overnight at 12° C. The following steps were carried out according to the instructions of the TA Cloning™ kit (British Biotechnology). At the end of the procedure, the white colonies of recombinant bacteria (white) were picked out in order to be cultured and to permit extraction of the plasmids incorporated according to the so-called “miniprep” procedure (17). The plasmid preparation from each recombinant colony was cut with a suitable restriction enzyme and analysed on agarose gel. Plasmids possessing an insert detected under UV light after staining the gel with ethidium bromide were selected for sequencing of the insert, after hybridization with a primer complementary to the Sp6 promoter present on the cloning plasmid of the TA Cloning Kit™. The reaction prior to sequencing was then performed according to the method recommended for the use of the sequencing kit “Prism ready reaction kit dye deoxyterminator cycle sequencing kit” (Applied Biosystems, ref. 401384), and automatic sequencing was carried out with an Applied Biosystems “Automatic Sequencer, model 373 A” apparatus according to the manufacturer's instructions.

[0379] PCR amplification according to the technique mentioned above was used on a cDNA synthesized from the nucleic acids of fractions of infective particles purified on a sucrose gradient, according to the technique described by H. Perron (13), from culture supernatants of B lymphocytes of a patient suffering from MS, immortalized with Epstein-Barr virus (EBV) strain B95 and expressing retroviral particles associated with reverse transcriptase activity as described by Perron et al. (3) and in French Patent Applications MS 10, 11 and 12. the clone LB19, whose sequence, identified by SEQ ID NO:59, is presented in FIG. 35.

[0380] The clone makes it possible to define, with the clone GM3 previously sequenced and the clone G+E+A (see Example 15), a region of 690 base pairs representative of a significant portion of the gag gene of the MSRV-1 retrovirus, as presented in FIG. 36. This sequence designated SEQ ID NO:88 is reconstituted from different clones overlapping at their ends. This sequence is identified under the name MSRV-1 “gag*” region. In FIG. 36, a potential reading frame with the translation into amino acids is presented below the nucleic acid sequence.

Example 13

Obtaining a Clone FBd13 Containing a pol Gene Region Related to the MSRV-1 Retrovirus and an Apparently Incomplete ENV Region Containing a Potential Reading Frame (orf) for a Glycoprotein

[0381] Extraction of viral RNAs: The RNAs were extracted according to the method briefly described below.

[0382] A pool of culture supernatant of B lymphocytes of patients suffering from MS (650 ml) is centrifuged for 30 minutes at 10,000 g. The viral pellet obtained is resuspended in 300 microliters of PBS/10 mM MgCl2. The material is treated with a DNAse (100 mg/ml)/RNAse (50 mg/ml) mixture for 30 minutes at 37° C. and then with proteinase K (50 mg/ml) for 30 minutes at 46° C.

[0383] The nucleic acids are extracted with one volume of a phenol/0.1% SDS (V/V) mixture heated to 60° C., and then re-extracted with one volume of phenol/chloroform (1:1; V/V).

[0384] Precipitation of the material is performed with 2.5 V of ethanol in the presence of 0.1 V of sodium acetate pH5.2. The pellet obtained after centrifugation is resuspended in 50 microliters of sterile DEPC water.

[0385] The sample is treated again with 50 mg/ml of “RNAse free” DNAse for 30 minutes at room temperature, extracted with one volume of phenol/chloroform and precipitated in the presence of sodium acetate and ethanol.

[0386] The RNA obtained is quantified by an OD reading at 260 nm. The presence of MSRV-1 and the absence of DNA contaminant is monitored by a PCR and an MSRV-1-specific RTPCR associated with a specific ELOSA for the MSRV-1 genome.

[0387] Synthesis of cDNA

[0388] 5 μg of RNA are used to synthesize a cDNA primed with a poly(DT) oligonucleotide according to the instructions of the “cDNA Synthesis Module” kit (ref RPN 1256, Amersham) with a few modifications: The reverse transcription is performed at 45° C. instead of the recommended 42° C.

[0389] The synthesis product is purified by a double extraction and a double purification according to the manufacturer's instructions.

[0390] The presence of MSRV-1 is verified by an MSRV-1 PCR associated with a specific ELOSA for the MSRV-1 genome.

[0391] “Long Distance PCR”: (LD-PCR)

[0392] 500 ng of cDNA are used for the LD-PCR step (Expand Long Template System; Boehringer (ref.1681 842)).

[0393] Several pairs of oligonucleotides were used. Among these, the pair defined by the following primers:

[0394] 5′ primer: GGAGAAGAGC AGCATAAGTG G (SEQ ID NO:66)

[0395] 3′ primer: GTGCTGATTG GTGTATTTAC AATCC (SEQ ID NO:67).

[0396] The Amplification Conditions are as Follows

[0397] 94° C. 10 seconds

[0398] 56° C. 30 seconds

[0399] 68° C. 5 minutes;

[0400] 10 cycles, then 20 cycles with an increment of 20 seconds in each cycle on the elongation time. At the end of this first amplification, 2 microliters of the amplification product are subjected to a second amplification under the same conditions as before.

[0401] The LD-PCR reactions are conducted in a Perkin model 9600 PCR apparatus in thin-walled microtubes (Boehringer).

[0402] The amplification products are monitored by electrophoresis of ⅕th of the amplification volume (10 microliters) in 1% agarose gel. For the pair of primers described above, a band of approximately 1.7 kb is obtained.

[0403] Cloning of the Amplified Fragment:

[0404] The PCR product was purified by passage through a preparative agarose gel and then through a Costar column (Spin; D. Dutcher) according to the supplier's instructions.

[0405] 2 microliters of the purified solution are joined up with 50 ng of vector PCRII according to the supplier's instructions (TA Cloning Kit; British Biotechnology)).

[0406] The recombinant vector obtained is isolated by transformation of competent DH5aF′ bacteria. The bacteria are selected using their resistance to ampicillin and the loss of metabolism for Xga1 (=white colonies). The molecular structure of the recombinant vector is confirmed by plasmid minipreparation and hydrolysis with the enzyme EcoR1.

[0407] FBd13, a positive clone for all these criteria, was selected. A large-scale preparation of the recombinant plasmid was performed using the Midiprep Quiagen kit (ref 12243) according to the supplier's instructions.

[0408] Sequencing of the clone FBd13 is performed by means of the Perkin Prism Ready Amplitaq FS dye terminator kit (ref. 402119) according to the manufacturer's instructions. The sequence reactions are introduced into a Perkin type 377 or 373A automatic sequencer. The sequencing strategy consists in gene walking carried out on both strands of the clone Fbd13.

[0409] The sequence of the clone FBd13 is identified by SEQ ID NO:58.

[0410] In FIG. 37, the sequence homology between the clone FBd13 and the HSERV-9 retrovirus is shown on the matrix chart by a continuous line for any partial homology greater than or equal to 70%. It can be seen that there are homologies in the flanking regions of the clone (with the pol gene at the 5′ end and with the env gene and then the LTR at the 3′ end), but that the internal region is totally divergent and does not display any homology, even weak, with the env gene of HSERV-9. Furthermore, it is apparent that the clone FBd13 contains a longer “env” region than the one which is described for the defective endogenous HSERV-9; it may thus be seen that the internal divergent region constitutes an “insert” between the regions of partial homology with the HSERV-9 defective genes.

[0411] This additional sequence determines a potential orf, designated ORF B 13, which is represented by its amino acid sequence SEQ ID NO:87.

[0412] The molecular structure of the clone FBd13 was analyzed using the GenWorks® software and GenBank™ and SwissProt data banks.

[0413] 5 glycosylation sites were found.

[0414] The protein does not have significant homology with already known sequences.

[0415] It is probable that this clone originates from a recombination of an endogenous retroviral element (ERV), linked to the replication of MSRV-1.

[0416] Such a phenomenon does not lack generation of the expression of polypeptides, or even of endogenous retroviral proteins which are not necessarily tolerated by the immune system. Such a scheme of aberrant expression of endogenous elements related to MSRV-1 and/or induced by the latter is liable to multiply the aberrant antigens, and hence tends to contribute to the induction of autoimmune processes such as are observed in MS. It clearly constitutes a novel element never hitherto described. In effect, interrogation of the data banks of nucleic acid sequences available in version No. 19 (1996) of the “Entrez” software (NCBI, NIH, Bethesda, USA) did not enable a known homologous sequence comprising the whole of the env region of this clone to be identified.

Example 14

Obtaining a Clone FP6 Containing a Portion of the pol Gene, with a Region Coding for the Reverse Transcriptase Enzyme Homologous to the Clone pol* MSRV-1 , and a 3′pol Region Divergent from the Equivalent Sequences Described in the Clones POL*, tpol, FBd3, JLBc1 and JLBc2

[0417] A 3′RACE was performed on total RNA extracted from plasma of a patient suffering from MS. A healthy control plasma treated under the same conditions was used as negative control. The synthesis of cDNA was carried out with the following modified oligo(dT) primer:

[0418] 5′ GACTCGCTGC AGATCGATTT TTTTTTTTTT TTTT 3′ (SEQ ID NO:68)

[0419] and Boehringer “Expand RT” reverse transcriptase according to the conditions recommended by the company. A PCR was performed with the enzyme Klentaq (Clontech) under the following conditions: 94° C. 5 min then 93° C. 1 min, 58° C. 1 min, 68° C. 3 min for 40 cycles and 68° C. for 8 min, and with a final reaction volume of 50 μl.

[0420] Primers Used for the PCR:

[0421] 5′ primer, identified by SEQ ID NO:69

[0422] 5′ GCCATCAAGC CACCCAAGAA CTCTTAACTT 3′;

[0423] 3′ primer, identified by SEQ ID NO:68 (=the same as for the cDNA)

[0424] A second, so-called “semi-nested” PCR was carried out with a 5′ primer located within the region already amplified. This second PCR was performed under the same experimental conditions as those used in the first PCR, using 10 ml of the amplification product originating from the first PCR.

[0425] Primers used for the Semi-Nested PCR:

[0426] 5′ primer, identified by SEQ ID NO:70

[0427] 5′ CCAATAGCCA GACCATTATA TACACTAATT 3′;

[0428] 3′ primer, identified by SEQ ID NO:68 (=the same as for the cDNa)

[0429] Primers SEQ ID NO:69 and SEQ ID NO:70 are specific for the pol* region: position No. 403 to No. 422 and No. 641 to No. 670, respectively.

[0430] An amplification product was thus obtained from the extracellular RNA extracted from the plasma of a patient suffering from MS. The corresponding fragment was not observed for the plasma of the healthy control. This amplification product was cloned in the following manner.

[0431] The amplified DNA was inserted into a plasmid using the TA Cloning™ kit. The 2 μl of DNA solution were mixed with 5 μl of sterile distilled water, 1 μl of a 10-fold concentrated ligation buffer “10×LIGATION BUFFER”, 2 μl of “pCR™ VECTOR” (25 ng/μl) and 1 μl of “TA DNA LIGASE”. This mixture was incubated overnight at 12° C. The following steps were carried out according to the instructions of the TA Cloning™ kit (British Biotechnology). At the end of the procedure, the white colonies of recombinant bacteria (white) were picked out in order to be cultured and to permit extraction of the plasmids incorporated according to the so-called “miniprep” procedure (17). The plasmid preparation from each recombinant colony was cut with a suitable restriction enzyme and analyzed on agarose gel. Plasmids possessing an insert detected under UV light after staining the gel with ethidium bromide was selected for sequencing of the insert, after hybridization with a primer complementary to the Sp6 promoter present on the cloning plasmid of the TA cloning kit™. The reaction prior to sequencing was then performed according to the method recommended for the use of the sequencing kit “Prism ready reaction kit dye deoxyterminator cycle sequencing kit” (Applied Biosystems, ref. 401384), and automatic sequencing was carried out with an Applied Biosystems “Automatic Sequencer, model 373 A” apparatus according to the manufacturer's instructions.

[0432] The clone obtained, designated FP6, enables a region of 467 bp which is 89% homologous to the pol* region of the MSRV-1 retrovirus and a region of 1167 bp which is 64% homologous to the pol region of ERV-9 (No. 1634 to 2856) to be defined.

[0433] The clone FP6 is represented in FIG. 38 by its nucleotide sequence identified by SEQ ID NO:61. The three potential reading frames of this clone are indicated by their amino acid sequence under the nucleotide sequence.

Example 15

Obtaining a Region Designated G+E+A Containing an Orf for a Retroviral Protease, by PCR Amplification of the Nucleic Acid Sequence Contained Between the 5′ Region Defined by the Clone “GM3” and the 3′ Region Defined by the Cloned pol*, from the RNA Extracted from a Pool of Plasmas of Patients Suffering from MS

[0434] Oligonucleotides specific for the MSRV-1 sequences already identified by the Applicant were defined in order to amplify the retroviral RNA originating from virions present in the plasma of patients suffering from MS. Control reactions were performed so as to monitor the presence of contaminants (reaction with water). The amplification consists of a step of RT-PCR followed by a “nested” PCR. Pairs of primers were defined for amplifying three overlapping regions (designated G, E and A) on the regions defined by the sequences of the clones GM3 and pol* described above.

[0435] Semi-nested RT-PCR for amplification of the region G:

[0436] in the first RT-PCR cycle, the following primers are used:

[0437] primer 1: SEQ ID NO:71 (sense)

[0438] primer 2: SEQ ID NO:72 (antisense)

[0439] in the second PCR cycle, the following primers are used:

[0440] primer 1: SEQ ID NO:73 (sense)

[0441] primer 4: SEQ ID NO:74 (antisense)

[0442] Nested RT-PCR for amplification of the region E:

[0443] in the first RT-PCR cycle, the following primers are used:

[0444] primer 5: SEQ ID NO:75 (sense)

[0445] primer 6: SEQ ID NO:76 (antisense)

[0446] in the second PCR cycle, the following primers are used:

[0447] primer 7: SEQ ID NO:77 (sense)

[0448] primer 8: SEQ ID NO:78 (antisense)

[0449] Semi-Nested RT-PCR for Amplification of the Region A:

[0450] in the first RT-PCR cycle, the following primers are used:

[0451] primer 9: SEQ ID NO:79 (sense)

[0452] primer 10: SEQ ID NO:80 (antisense)

[0453] in the second PCR cycle, the following primers are used:

[0454] primer 9: SEQ ID NO:81 (sense)

[0455] primer 11: SEQ ID NO:82 (antisense)

[0456] The primers and the regions G, E and A which they define are positioned as follows:

5cDNA 1 G 4 2 5 7 E 8 6 3 A 11 10<-------------------------------------------><------------------------------------------------> GM3 POL*

[0457] The sequence of the region defined by the different clones G, E and A was determined after cloning and sequencing of the “nested” amplification products.

[0458] The clones G, E and A were assembled together by PCR with the primers 1 at the 5′ end of the fragment G and 11 at the 3′ end of the fragment A, the primers being described above. An approximately 1580-bp fragment G+E+A was amplified and inserted into a plasmid using the TA Cloning (trademark) kit. The sequence of the amplification product corresponding to G+E+A was determined and analysis of the G+E and E+A overlaps was carried out. The sequence is shown in FIG. 39, and corresponds to the sequence SEQ ID NO:89.

[0459] A, reading frame coding for an MSRV-1 retroviral protease was found in the region E. The amino acid sequence of the protease, identified by SEQ ID NO:90, is presented in FIG. 40.

Example 16

Obtaining a Clone LTRGAG12, Related to an Endogenous Retroviral Element (ERV) Close to MSRV-1, in the DNA of an MS Lymophoblastod Line Producing Virions and Expressing the MSRV-1 Retrovirus

[0460] A nested PCR was performed on the DNA extracted from a lymphoblastoid line (B lymphocytes immortalized with the EBV virus strain B95, as described above and as is well known to a person skilled in the art) expressing the MSRV-1 retrovirus and originating from peripheral blood lymphocytes of a patient suffering from MS.

[0461] In the First PCR Step, the Following Primers are Used:

[0462] primer 4327: CTCGATTTCT TGCTGGGCCT TA (SEQ ID NO:83)

[0463] primer 3512: GTTGATTCCC TCCTCAAGCA (SEQ ID NO:84)

[0464] This step comprises 35 amplification cycles with the following conditions: 1 min at 94° C., 1 min at 54° C. and 4 min at 72° C.

[0465] In the Second PCR Step, the Following Primers are Used:

[0466] primer 4294: CTCTACCAAT CAGCATGTGG (SEQ ID NO:85)

[0467] primer 3591: TGTTCCTCTT GGTCCCTAT (SEQ ID NO:86)

[0468] This step comprises 35 amplification cycles with the following conditions: 1 min at 94° C., 1 min at 54° C. and 4 min at 72° C.

[0469] The products originating from the PCR were purified after purification on agarose gel according to conventional methods (17), and then resuspended in 10 μl of distilled water. Since one of the properties of Taq polymerase consists in adding an adenine at the 3′ end of each of the two DNA strands, the DNA obtained was inserted directly into a plasmid using the TA Cloning™ kit (British Biotechnology). The 2 ml of DNA solution were mixed with 5 μl of sterile distilled water, 1 μl of a 10-fold concentrated ligation buffer “10× LIGATION BUFFER”, 2 μl of “pCR™ VECTOR” (25 ng/μl) and 1 μl of “TA DNA LIGASE”. This mixture was incubated overnight at 12° C. The following steps were carried out according to the instructions of the TA Cloning™ kit (British Biotechnology). At the end of the procedure, the white colonies of recombinant bacteria were picked out in order to be cultured and to permit extraction of the plasmids incorporated according to the so-called “miniprep” procedure (17). The plasmid preparation from each recombinant colony was cut with a suitable restriction enzyme and analyzed on agarose gel. The plasmids possessing an insert detected under UV light after staining the gel with ethidium bromide were selected for sequencing of the insert, after hybridization with a primer complementary to the Sp6 promoter present on the cloning plasmid of the TA Cloning Kit™. The reaction prior to sequencing was then performed according to the method recommended for the use of the sequencing kit “Prism ready reaction kit dye deoxyterminator cycle sequencing kit” (Applied Biosystems, ref. 401384), and automatic sequencing was carried out with an Applied Biosystems “Automatic Sequencer, model 373 A” apparatus according to the manufacturer's instructions.

[0470] Thus, a clone designated LTRGAG12 could be obtained, and is represented by its internal sequence identified by SEQ ID NO:60.

[0471] This clone is probably representative of endogenous elements close to ERV-9, present in human DNA, in particular in the DNA of patients suffering from MS, and capable of interfering with the expression of the MSRV-1 retrovirus, hence capable of having a role in the pathogenesis associated with the MSRV-1 retrovirus and capable of serving as marker for a specific expression in the pathology in question.

Example 17

Detection of Anti-MSRV-1 Specific Antibodies in Human Serum

[0472] Identification of the sequence of the pol gene of the MSRV-1 retrovirus and of an open reading frame of this gene enabled the amino acid sequence SEQ ID NO:63 of a region of the said gene, referenced SEQ ID NO:62, to be determined.

[0473] Different synthetic peptides corresponding to fragments of the protein sequence of MSRV-1 reverse transcriptase encoded by the pol gene were tested for their antigenic specificity with respect to sera of patients suffering from MS and of healthy controls.

[0474] The peptides were synthesized chemically by solid-phase synthesis according to the Merrifield technique (22). The practical details are those described below.

[0475] a) Peptide Synthesis

[0476] The peptides were synthesized on a phenylacetamidomethyl (PAM)/polystyrene/divinylbenzene resin (Applied Biosystems, Inc. Foster City, Calif.), using an “Applied Biosystems 430A” automatic synthesizer. The amino acids are coupled in the form of hydroxybenzotriazole (HOBT) esters. The amino acids used are obtained from Novabiochem (Läuflerlfingen, Switzerland) or Bachem (Bubendorf, Switzerland).

[0477] The chemical synthesis was performed using a double coupling protocol with N-methylpyrrolidone (NMP) as solvent. The peptides were cut from the resin, as well as the side-chain protective groups, simultaneously, using hydrofluoric acid (HF) in a suitable apparatus (type I cleavage apparatus, Peptide Institute, Osaka, Japan).

[0478] For 1 g of peptidyl resin, 10 ml of HF, 1 ml of anisole and 1 ml of dimethyl sulphide 5DMS are used. The mixture is stirred for 45 minutes at −2° C. The HF is then evaporated off under vacuum. After intensive washes with ether, the peptide is eluted from the resin with 10% acetic acid and then lyophilized.

[0479] The peptides are purified by preparative high performance liquid chromatography on a VYDAC C18 type column (250×21 mm) (The Separation Group, Hesperia, Calif., USA). Elution is carried out with an acetonitrile gradient at a flow rate of 22 ml/min. The fractions collected are monitored by an elution under isocratic conditions on a VYDAC™ C18 analytical column (250×4.6 mm) at a flow rate of 1 ml/min. Fractions having the same retention time are pooled and lyophilized. The preponderant fraction is then analyzed by analytical high performance liquid chromatography with the system described above. The peptide which is considered to be of acceptable purity manifests itself in a single peak representing not less than 95% of the chromatogram.

[0480] The purified peptides are then analyzed with the object of monitoring their amino acid composition, using an Applied Biosystems 420H automatic amino acid analyzer. Measurement of the (average) chemical molecular mass of the peptides is obtained using LSIMS mass spectrometry in the positive ion mode on a VG. ZAB.ZSEQ double focusing instrument connected to a DEC-VAX 2000 acquisition system (VG analytical Ltd, Manchester, England).

[0481] The reactivity of the different peptides was tested against sera of patients suffering from MS and against sera of healthy controls. This enabled a peptide designated S24Q to be selected, whose sequence is identified by SEQ ID NO:63, encoded by a nucleotide sequence of the pol gene of MSRV-1 (SEQ ID NO:62).

[0482] b) Antigenic Properties

[0483] The antigenic properties of the S24Q peptide were demonstrated according to the ELISA protocol described below.

[0484] The lyophilized S24Q peptide was dissolved in 10% acetic acid at a concentration of 1 mg/ml. This stock solution was aliquoted and kept at +4° C. for use over a fortnight, or frozen at +20° C. for use within 2 months. An aliquot is diluted in PBS (phosphate buffered saline) solution so as to obtain a final peptide concentration of 5 micrograms/ml. 100 microliters of this dilution are placed in each well of Nunc Maxisorb (trade name) microtitration plates. The plates are covered with a “plate-sealer” type adhesive and kept for 2 hours at +37° C. for the phase of adsorption of the peptide to the plastic. The adhesive is removed and the plates are washed three times with a volume of 300 microliters of a solution A (1×′PBS, 0.05% Tween 20r), then inverted over an absorbent tissue. The plates thus drained are filled with 250 microliters per well of a solution B (solution A +10% of goat serum), then covered with an adhesive and incubated for 1 hour at 37° C. The plates are then washed three times with the solution A as described above.

[0485] The test serum samples are diluted beforehand to 1/100 in the solution B, and 100 microliters of each dilute test serum are placed in the wells of each micro-titration plate. A negative control is placed in one well of each plate, in the form of 100 microliters of buffer B. The plates covered with an adhesive are then incubated for 1 hour 30 min at 37° C. The plates are then washed three times with the solution A as described above. For the IgG response, a peroxidase-labelled goat antibody directed against human IgG (marketed by Jackson Immuno Research Inc.) is diluted in the solution B (dilution 1/10,000). 100 microliters of the appropriate dilution of the labelled antibody are then placed in each well of the microtitration plates, and the plates covered with an adhesive are incubated for 1 hour at 37° C. A further washing of the plates is then performed as described above. In parallel, the peroxidase substrate is prepared according to the directions of the bioMerieux kits. 100 microliters of substrate solution are placed in each well, and the plates are placed protected from light for 20 to 30 minutes at room temperature.

[0486] When the color reaction has stabilized, 50 microliters of Color 2 (bioMérieux trade name) are placed in each well in order to stop the reaction. The plates are placed immediately in an ELISA plate spectrophotometric reader, and the optical density (OD) of each well is read at a wavelength of 492 nm.

[0487] The serological samples are introduced in duplicate or in triplicate, and the optical density (OD) corresponding to the serum tested is calculated by taking the mean of the OD values obtained for the same sample at the same dilution.

[0488] The net OD of each serum corresponds to the mean OD of the serum minus the mean OD of the negative control (solution B: PBS, 0.05% Tween 20x, 10% goat serum).

[0489] c) Detection of Anti-MSRV-1 IgG Antibodies (S24Q) by ELISA

[0490] The technique described above was used with the S24Q peptide to test for the presence of anti-MSRV-1 specific IgG antibodies in the serum of 15 patients for whom a definite diagnosis of MS was established according to the criteria of Poser (23), and of 15 healthy controls (blood donors).

[0491]
FIG. 41 shows the results for each serum tested with an anti-IgG antibody. Each vertical bar represents the net optical density (OD at 492 nm) of a serum tested. The ordinate axis gives the net OD at the top of the vertical bars. The first 15 vertical bars lying to the left of the vertical broken line represent the sera of 15 healthy controls (blood donors), and the 15 vertical bars lying to the right of the vertical broken line represent the sera of 15 cases of MS tested. The diagram enables 2 controls to be revealed whose OD rises above the grouped values of the control population. These values may represent the presence of specific IgGs in symptomless seropositive patients. Two methods were hence evaluated in order to determine the statistical threshold of positivity of the test.

[0492] The mean of the net OD values for the controls, including the controls with high net OD values, is 0.129 and the standard deviation is 0.06. Without the 2 controls whose OD values are greater than 0.2, the mean of the “negative” controls is 0.107 and the standard deviation is 0.03. A theoretical threshold of positivity may be calculated according to the formula:

threshold value (mean of the net OD values of the negative controls)+(2 or 3′standard deviation of the net OD values of the negative controls).

[0493] In the first case, there are considered to be symptomless seropositives, and the threshold value is equal to 0.11+(3×0.03)=0.20. The negative results represent a non-specific “background” of the presence of antibodies directed specifically against an epitope of the peptide.

[0494] In the second case, if the set of controls consisting of blood donors in apparent good health is taken as a reference basis, without excluding the sera which are, on the face of it, seropositive, the standard deviation of the “non-MS controls” is 0.116. The threshold value then becomes 0.13+(3×0.06)=0.31.

[0495] According to this latter analysis, the test is specific for MS. In this respect, it is seen that the test is specific for MS, since, as shown in Table 1, no control has a net OD above this threshold. In fact, this result reflects the fact that the antibody titres in patients suffering from MS are, for the most part, higher than in healthy control who have been in contact with MSRV-1.

[0496] In accordance with the first method of calculation, and as shown in FIG. 41 and in Table 3, 6 of the 15 MS sera give a positive result (OD greater than or equal to 0.2), indicating the presence of IgGs specifically directed against the S24Q peptide, hence against a portion of the reverse transcriptase enzyme of the MSRV-1 retrovirus encoded by its pol gene, and consequently against the MSRV-1 retrovirus.

[0497] Thus, approximately 40% of the MS patients tested have reacted against an epitope carried by the S24Q peptide and possess circulating IgGs directed against the latter.

[0498] Two out of 15 blood donors in apparent good health show a positive result. Thus, it is apparent that approximately 13% of the symptomless population may have been in contact with an epitope carried by the S24Q peptide under conditions which have led to an active immunization which manifests itself in the persistence of specific serum IgGs. These conditions are compatible with an immunization against the MSRV-1 retrovirus reverse transcriptase during an infection with (and/or reactivation of) the MSRV-1 retrovirus. The absence of apparent neurological pathology recalling MS in these seropositive controls may indicate that they are healthy carriers and have eliminated an infectious virus after immunizing themselves, or that they constitute an at-risk population of chronic carriers. In effect, epidemiological data showing that a pathogenic agent present in the environment of regions of high prevalence of MS may be the cause of this disease imply that a fraction of the population free from MS has necessarily been in contact with such a pathogenic agent. It has been shown that the MSRV-1 retrovirus constitutes all or part of this “pathogenic agent” at the source of MS, and it is hence normal for controls taken from a healthy population to possess IgG type antibodies against components of the MSRV-1 retrovirus.

[0499] Lastly, the detection of anti-S24Q antibodies in only one out of two MS cases tested here may reflect the fact that this peptide does not represent an immunodominalt MSRV-1 epitope, that inter-individual strain variations may induce an immunization against a divergent peptide motif in the same region, or that the course of the disease and the treatments followed may modulate over time the antibody response against the S24Q peptide.

6TABLE NO. 3CONTROLSMS0.1010.1360.0580.3910.1260.370.1310.1190.1050.2670.2940.1410.1160.1020.0880.180.1 050.4110.1720.1640.1370.0490.2230.6440.080.2680.0730.0650.1320.074Mean0.129Std. Dev.0.06Threshold0.31

[0500] d) Detection of Anti-MSRV-1 IgM Antibodies by ELISA

[0501] The ELISA technique with the S24Q peptide was used to test for the presence of anti-MSRV-1 IgM specific antibodies in the same sera as above.

[0502]
FIG. 42 shows the results for each serum tested with an anti-IgM antibody. Each vertical bar represents the net optical density (OD at 492 nM) of a serum tested. The ordinate axis gives the net OD at the top of the vertical bars. The first 15 vertical bars lying to the left of the vertical line cutting the abscissa axis represent the sera of 15 healthy controls (blood donors), and the vertical bars lying to the right of the vertical broken line represent the sera of 15 cases of MS tested.

[0503] The mean of the OD values for the MS cases tested is 1.6.

[0504] The mean of the net OD values for the controls is 0.7.

[0505] The standard deviation of the negative controls is 0.6.

[0506] The threshold of theoretical positivity may be calculated according to the formula:

threshold value=(mean of the OD values of the negative controls)+(3×standard deviation of the OD values of the negative controls)

[0507] The threshold value is hence equal to 0.7+(3×0.6)=2.5;

[0508] The negative results represent a non-specific “background” of the presence of antibodies directed specifically against an epitope of the peptide.

[0509] According to this analysis, and as shown in FIG. 42 and in the corresponding Table 4, the IgM test is specific for MS, since no control has a net OD above the threshold. Six of the 15 MS sera produce a positive IgM result.

[0510] The difference in seroprevalence between the MS and control populations is extremely significant: “chi-squared” test, p<0.002.

[0511] These results point to an aetiopathogenic role of MSRV-1 in MS.

[0512] Thus, the detection of IgM and IgG antibodies against the S24Q peptide makes it possible to evaluate, alone or in combination with other MSRV-1 peptides, the course of an MSRV-1 infection and/or of the viral reactivation of MSRV-1.

7TABLE NO. 4CONTROLSMS1.4490.9740.3716.1170.4482.8830.4561.9450.8851.7872.2350.2730.3011.7660.1380.6680.162.6031.0730.8021.3660.2450.2830.1470.2622.4410.5850.2870.3560.589Mean0.7Std. Dev.0.6ThresholdValue2.5

[0513] It is possible, as a result of the new discoveries made and the new methods developed by the inventors, to permit the improved implementation of diagnostic tests for MSRV-1 infection and/or reactivation and to evaluate a therapy in MS and/or RA on the basis of its efficacy in “negativing” the detection of these agents in the patient's biological fluids. Furthermore, early detection in individuals not yet displaying neurological signs of MS or rheumatological signs of RA could make it possible to institute a treatment which would be all the more effective with respect to the subsequent clinical course for the fact that it would precede the lesion stage which corresponds to the onset of the clinical disorders. Now, at the present time, a diagnosis of MS or RA cannot be established before a symptomatology of lesions has set in, and hence no treatment is instituted before the emergence of a clinical picture suggestive of lesions which are already significant. The diagnosis of an MSRV-1 and/or MSRV-2 infection and/or reactivation in man is hence of decisive importance, and the present invention provides the means of doing this.

[0514] It is thus possible, apart from carrying out a diagnosis of MSRV-1 infection and/or reactivation, to evaluate a therapy in MS on the basis of its efficacy in “negativing” the detection of these agents in the patients' biological fluids.

Example 18

[0515]

1
) Materials and Methods

[0516] Patients and Clinical Samples

[0517] Choroid plexus cells from MS patients and controls were obtained from the brain-cell library, Laboratoire R. Escourolles, Hôpital de la Salpêtriére, Paris, France. Non-tumoral leptomeningeal cells from controls were obtained as previously described (26). Peripheral blood from MS and control patients used for obtaining B-cell lines and plasma, were obtained from the Neurological Departments, CHU de Grenoble, and from INSERM U 134, Hôpital de la Salpêtriére, France. Clinical details and origin of the 10 MS patients and of the 10 patients with other neurological diseases who provided CSF samples are given in Table 6.

[0518] Cell Cultures, Virus Isolation and Purification

[0519] All cell-types were cultured as previously described (3, 5, 26). All cultures were regularly screened for mycoplasma contamination with an ELISA mycoplasma-detection kit (Boehringer). No cell-extract nor supernatant used contained detectable mycoplasma.

[0520] Extracellular virion purification and sucrose density gradients were performed as previously described (3, 5, 26). From each sucrose gradient 0.5-1 ml fractions were collected from the top of the tubes, with a 1000 μl Pipetman and a different sterile tip for each fraction. 60 μl were used for RT activity assay and the rest was mixed with 1 volume of buffer containing 4M guanidinium thiocyanate, 0.5% N-Lauroyl sarcosin, 25 mM EDTA, 0.2% β-mercaptoethanol adjusted at pH 5.5 with acetic acid. These mixtures were frozenat −80° C. for further RNA extraction or directly processed according to Chomzynski (20), with an overnight precipitation stepat −20° C., in the presence of RNase-free glycogen (Boehringer). RNA was dissolved in 20 to 50 μl of DEPC-treated water in the presence of 1-2 μl of recombinant RNase-inhibitor (PROMEGA) and 0,1 mM DTT. 10 μl aliquots were used for each RT-PCR.

[0521] Reverse Transcriptase Activity

[0522] RT-activity was tested with 20 mM Mg++ and poly-Cm or polyC templates, in virion pellets or fractions from sucrose gradients as previously described (3, 5, 26).

[0523] cDNA Synthesis and ‘Pan-retro’ RT-PCR with Degenerate Primers

[0524] A total RT-activity between 106-107 dpm was required in the fraction containing the peak of purified virions. The “Pan-retro” RT-PCR technique (27) was performed on virion RNA extracted by the method of Chomczynski (20) and dissolved in 20 μl RNase-free water. 5 μl RNA solution was incubated for 30 min at 37° C. with 0.3 units (3 units for CSF series) of RNase-free DNase-1 (Boehringer) in a 20 ml reaction containing 7.5 mM random hexamers, 5 mM Hepes-HCl pH 6.9, 75 mM KCl, 3 mM MgCl2, 10 mM DTT, 50 mM Tris-HCl pH 7.5, 0.5 mM each dNTP, and 20 units recombinant RNase inhibitor (Promega). The DNase was then heat inactivated at 80° C. for 10 min. 20 units MoMLV RT (Pharmacia) and a further 20 units of RNase inhibitor were added to each tube in a Genesphere™ enclosure (Safetech, Ireland) and cDNA was synthesised for 90 min at 37° C. Following reverse transcription, the cDNA was boiled for 5 min then cooled rapidly on ice. The Round 1 PCR mix (final volume 25 μl per reaction; 20 mM Tris-HCl pH 8.4, 60 mM KCl, 2.5 mM MgCl2, 200 ng each of primers PAN-UO and PAN-DI [see FIG. 44], 0.2 mM each dNTP) was treated with 0.3 units DNase-1 and then heat inactivated as above. 2.5 μl cDNA was added in the Genesphere™ enclosure and the tubes heated to 80° C. before adding 0.5 units Taq polymerase (Perkin Elmer) individually to each tube (“hot start”). Round 1 PCR parameters were 35 cycles of 95° C. for 1 min, 34° C. for 30 sec, 72° C. for 1 min, with a final 7 min extension at 72° C. 0.5 ml of Round 1 PCR product was transferred to the Round 2 DNase-treated PCR mix (composition as for Round 1 but containing primers PAN-UI and PAN-DI) using the “hot start” procedure. Round 2 PCR parameters were as for Round 1 but using 30 cycles only and annealing at 45° C. for 1 min.

[0525] Cloning of PCR Products

[0526] PCR products were cloned using the TA-cloning™ kit (British Biotechnology) according to the manufacturer's recommendations.

[0527] Sequencing

[0528] Sequencing reactions were performed using the “Prism ready reaction kit dye deoxyterminator cycle sequencing kit” (Applied Biosystems). Automatic sequence analysis was performed on an automatic sequencer (Applied Biosystems, 373 A).

[0529] RT-PCR with ST1 Primer Sets

[0530] The first PCR round was performed directly from the cDNA reaction mixture according to the one-step RT-PCR technique described by Mallet et al. (28). This one-step RT-PCR procedure reduced the probability of airborne contamination when opening the tubes and transferring PCR reagents after an independent cDNA synthesis. RNA was extracted as previously from 2 ml of plasma (snap-frozen in liquid nitrogen and stored at −80° C.) or from a 500 ml sucrose fraction with a total RT-activity above 106 dpm, and resuspended in 50 μl of RNase-free water. For each RT-PCR reaction 10 μl of RNA solution was incubated in a Perkin-Elmer 480 thermocycler, 15 min at 20° C. with 1U of RNase-free DNASE 1 and 1.2 μl of 10×DNASE buffer (50 mM Tris, 10 mM MgCl2 and 0,1 mM DTT) containing 1 U/ml of RNase-inhibitor (PROMEGA), and heated at 70° C. for 10 min for DNase inactivation. The solution was placed on ice and mixed (in conditions preventing airborne dust/DNA contamination) with 88 μl of PCR mix containing: 1×taq buffer, 25 nM/tube dNTPs, 40 pM/tube of each first round primer (ST1.1 upstream primer: 5′ AGGAGTAAGGAAACCCAACGGAC 3′ (SEQ ID NO:99); ST1.1 downstream primer: 5′TAAGAGTTGCACAAGTGCG 3′ (SEQ ID NO:100)), 2.5 U/tube of taq (Appligene) and 10 U/tube of AMV-RT (Boehringer). Each tube was further incubated in a Perkin-Elmer 480 thermocycler for 10 min at 65° C., followed by 2 h at 42° C. for cDNA synthesis and 5 min at 95° C. for inactivation of AMV-RT and DNA denaturation. First round parameters were 40 cycles of 95° C. for 1 min, 53° C. for 2.5 min, 72° C. for 1 min, with a final extension of 10 min at 72° C. 10 μl of the first round were transferred to the second round PCR mix previously treated at 20° C. for 15 min with RNase-free DNase 1 (0.02 U/ml) followed by DNase inactivation at 70° C. for 10 min. This mix contained 1×taq buffer, 25 nM/tube dNTPs, 40 pM/tube of each second round primers [ST1.2 upstream primer: 5′TCAGGGATAGCCCCCATCTAT3′ (SEQ ID NO:101) ST1.2 downstream primer: 5′AACCCTTTGCCACTACATCAATTT3′ (SEQ ID NO:102)] and 2.5 U/tube of taq (Appligene). Second round parameters were 30 cycles of 95° C. for 1 min, 53° C. for 1.5 min, 72° C. for 1 min, with a final extension of 8 min at 72° C. 20 ml of this nested RT-PCR product were deposited on a 0,7% agarose gel containing ethidium bromide and exposed to UV light for the visualization of amplified products.

[0531] Hybridisation Analysis of PCR Products: MSRV-pol Detection by ELOSA

[0532] The protocol was essentially as previously described (21) but with the following modifications: Nunc Maxisorb microtiter plates were coated with 100 ng per well capture probe CpV1b (see FIG. 44) either by passive adsorption (21) or alternatively by using streptavidin coated plates and biotinylated CpV1b. Peroxidase-1 abelled detector probe DpV1 (see FIG. 44) was used and the assay cut-off was defined as the mean of 4 negative controls plus 0.2 0 D492 units.

[0533] RNA Extraction, cDNA Synthesis and PCR Amplification from MS Plasma Samples

[0534] Total RNA was extracted from human MS plasma by a guanidium method as described elsewhere (29). Total RNA extracted from 100 ul of plasma, were treated with RNase-free DNase I (0.1 U/ml; Boehringer Manheim, France) and reverse transcribed under the conditions recommended by the manufacturer, using Superscript reverse transcriptase (Gibco-BRL, FRANCE). The resulting cDNAs were amplified by semi-nested PCR through 35 cycles (94° C. 1 min, 55° C. 1 mn, 72° C. 1 min 30 sec) and 72° C. 8 min for a final extension.

[0535] Three different fragments in the RT region were amplified by the following specific primers:

[0536] in the protease (PRT) region, for the 1st and 2nd round of PCR, respectively, sense primer [5′ TCC AGC AGC AGG ACT GAG GGT 3′ (SEQ ID NO:103)] and antisense primers [5′ CTG TCC GTT GGG TTT CCT TAC TCC T 3′ (SEQ ID NO:104)/5′ GAC AGC AAA TOG GTA TTC CTT TCC 3′ (SEQ ID NO:105)]

[0537] in the fragment A of the RT region (Cf. FIG. 46), for the 1st and 2nd round of PCR, respectively, sense primer [5′ AGG AGT AAG GAA ACC CAA CGG ACA G 3′ (SEQ ID NO:106)] and antisense primers [5′ TGT ATA TAA TGG TCT GGC TAT TGG G 3′ (SEQ ID NO:107)/5′ TTC GGC AGA AAC CTG TTA TGC CAA GG 3′ (SEQ ID NO:108)]

[0538] in the fragment B of the RT region (Cf. FIG. 46), for the 1st and 2nd round of PCR, respectively, sense primers [5′ GGC TCT GCT CAC AGG AGA TTA GAT AC 3′ (SEQ ID NO:109)/5′ AAA GGC ACC AGG GCC CTC AGT GAG GA 3′ (SEQ ID NO:110)] and antisense primer 3′[5′ GGT TTA AGA GTT GCA CAA GTG CGC AGT C 3′ (SEQ ID NO:101)].

[0539] The amplified fragments were analyzed on ethidium bromide-stained agarose gels, cloned in the TA cloning vector (Invitrogen) and sequenced.

[0540] 2) Results

[0541] Specific Retroviral RNA is Found in Extracellular Virions from MS Patient-derived Cell Cultures and in MS Patients' CSF

[0542] Choroid plexus cells (4) (obtained post-mortem) and EBV-immortalized peripheral blood B-lymphocytes (30, 31) from MS patients gave rise to cultures expressing 100-120 nm viral particles associated with RT-activity similar to that of the original LM7 isolate (3). Similar cell-types from non-MS donors produced neither this RT-activity nor virions. All the ‘infected’cultures were poorly and/or transiently productive and/or had a limited lifespan. Therefore, in order to analyze the genomic RNA present in the very limited quantity of extracellular virions, we used an RT-PCR approach to amplify, with degenerate primers, a conserved region of the pol gene present in all known retroviruses (12); the techniques based on this approach will be called “Pan-retro” RT-PCR. Extensive DNase treatment of samples and reagents was essential, because human DNA contains many endogenous retroviral elements amplifiable by this technique.

[0543] “Pan-retro” RT-PCR experiments were performed on sucrose-density gradient purified virions from supernatants of different types of cell cultures and their non-infected controls: (i) choroid plexus cells sampled post-mortem from MS brain (PLI-1), (ii) choroid plexus cells from non-MS brain autopsy, infected by co-culture with irradiated LM7 cells (LM7P), and (iii) identical non-infected choroid-plexus cells. “Early” B-cell lines obtained by spontaneous in vitro transformation of two EBV-seropositive individuals, (iv) one MS patient and (v) one non-MS control, were also analysed. FIG. 43 illustrates the RT-activity in sucrose-gradient fractions obtained from the B-cell cultures. The technique described by Shih et al. (12) was modified in a semi-nested RT-PCR protocol (27) using degenerate primers (FIG. 2) and extensive DNase treatment. PCR amplifications were performed in London (Dpt of Virology, U.C.L.M.S.) on coded aliquots of the density gradient fractions. Blind and systematic cloning and sequencing of the PCR products were undertaken in an independent laboratory (bioMérieux, Lyon). After complete sequencing of 20 to 30 clones per sucrose gradient fraction, the codes were broken and results analysed in parallel with the RT-activity data.

8TABLE 5SEQUENCES GENERATED BY ‘PAN-RETROVIRUS’ PCR OF DENSITYGRADIENT FRACTIONS(containing the peak of RT-activity or the corresponding control fraction)MSRVPCRCULTUREc-polERVg (v)artefacts (vl)Total clonesLM7P (l)16 4626PLI-I (ll)911323MS B-CELL LINE (lll)92819CONTROL B-CELL LINE (lv)002626l LM7-Infected choroid plexus cell culture ll MS patient-derived choroid plexus cell culture (PLI-2). lll MS patient-derived spontaneous B-cell line (Immortalized by endogenous EBV strain). lv Non-MS control B-cell line. v Clones with >90% homology with the GenBank sequence HSERV9 are designated ERV9 in this study. vl PCR artefacts included primer multimers, concatemers, single primer amplifications, etc.

[0544] Table 5 presents the distribution of sequences obtained from sucrose gradient fractions containing the peak of viral RT-activity in MS-derived cultures and also the sequences amplified from the corresponding RT-activity negative fractions of uninfected cultures. The predominant sequence detected in bands of the expected size (≅140 bp) amplified in all the RT-activity positive fractions (but not in the RT-activity negative fractions) was different from known retroviruses and was designated MSRV-cpol. MSRV-cpol sequences exhibited partial homology (70-75%) with ERV9, a previously described endogenous retroviral sequence (18). A few ERV9 sequences (>90% homology with ERV9) were also present but clearly represented a minority of clones. In addition to typical pol sequences, numerous PCR artefacts (primer multimers, concatemers or single-primer amplifications) related to the use of degenerate primers and low-temperature annealing, were found in all samples (Table 5).

[0545]
FIG. 44 shows an alignment of a consensus sequence of MSRV-cpol with the corresponding VLPQG/YMDD region of diverse retroviruses. FIG. 45 displays a phylogenic tree based on the evolutionarily conserved amino acid sequences of both exogenous and endogenous retroviruses in this region. From this tree it can be seen that the pol gene of MSRV is phylogenically related to the C-type group of oncovirinae.

[0546] A small scale study was performed to determine the prevalence of MSRV c-pol sequences in the CSF of patients with MS. Identification of MSRV-cpol in PCR products by cloning and sequencing is both laborious and time consuming. We therefore devised an enzyme-linked oligosorbent assay (ELOSA), using a capture probe (CpV1B) and a peroxidase-1 abelled detector probe (DpV1), for the rapid identification of MSRV-cpol sequences in ‘Pan-retrovirus’ PCR products (FIG. 44). The specificity of this sandwich hybridization-based assay for HMSRV-cpol was tested with both distantly related (HIV and MOMLV) and closely related (ERV9) pol sequences. No significant cross reactivity with such targets was observed despite the ability of the ELOSA to detect as little as 0.01 ng of MSRV-cpol DNA.

9DETECTION OF HMSRV IN THE CSF OF PATIENTS WITH MULTIPLE SCLEROSISAND OTHER NEUROLOGICAL DISEASESMS TreatmentMSRVPatient1Age/SexDiagnosisMS TypeMS ActivityMS Durationat samplingELOSAITMS127 yrs/Mmultiple2° progressiveslow 5 yrscorticosteroidsnegativesclerosisprogressionITMS255 yrs/Mmultiple1° progressiveslow 9 yrsnonePOSITIVEsclerosisprogressionITMS351 yrs/Fmultiple1° progressiveslow 2 yrsnonenegativesclerosisprogressionITMS422 yrs/Fmultiplerelapsing/in remission 8 yrsnonePOSITIVEsclerosisremittingITMS527 yrs/Fmultiple1° progressiveslow 8 yrscyclophosphamidenegativesclerosisprogressionITMS633 yrs/Mmultiple2° progressiveslow16 yrsnone (previouslynegativesclerosisprogressioncycloph. + corticost.)ITMS733 yrs/Fmultiple2° progressiveslow 9 yrsnonePOSITIVEsclerosisprogressionITMS825 yrs/Fmultiplerelapsing/stable 3 yrsnonePOSITIVEsclerosisremittingITMS936 yrs/Fmultiple2° progressiveslow 3 yrsnonePOSITIVEsclerosisprogressionITMS1038 yrs/Mmultiple2° progressiveslow 7 yrscorticosteroidsnegativesclerosisprogressionOND137 yrs/FcerebellarNA2NANANAnegativeatrophyOND226 yrs/FviralNANANANAnegativemyelitisOND338 yrs/Fviral encephalitisNANANANAnegativeOND428 yrs/Fviral encephalitisNANANANAnegativeOND554 yrs/Mviral encephalitisNANANANAnegativeOND632 yrs/MGulliain-BerreNANANANAnegativeOND754 yrs/FcerebrovascularNANANANAnegativeOND852 yrs/FhydrocephalusNANANANAnegativeOND925 yrs/F1° cerebralNANANANAnegativetumourOND1021 yrs/MepilepsyNANANANAnegative1CSF samples from patients ITMS1 - OND2 were made available by Prof. P. Ferrante, University Centre for Multiple Sclerosis, Milan, Italy. CSF samples from patients OND3 - OND10 were made available by Profs. J. Pellat and J. Perret, Dept. of Neurology, University Hospital, Grenoble, France. 2NA = Not Applicable

[0547] Cerebrospinal fluid (CSF) samples were available from 10 patients with MS and from 10 patients with other neurological disorders. Total RNA was extracted from CSF pellets, reverse transcribed and amplified as above. ELOSA analysis (Table 6) of the PCR products revealed MSRV-cpol sequences in 5 of the 10 MS patient samples but in none of the 10 samples from patients with other neurological diseases (P<0.05). The presence of MSRV-cpol did not appear to be correlated with age, sex or type of MS, but was seen in untreated patients only (5/6). No patient with immunosuppressive therapy was found positive (0/4). No correlation between MSRV-cpol detection and CSF cell count was observed.

[0548] Cloning and Sequencing a Larger Region of the Pol Gene

[0549] An independent identification of the MSRV genomic sequence was obtained by a non-PCR approach using RNA extracted from concentrated virions derived from 2.5 liters of LM7-infected sub-cultures of choroid plexus cells. A limited number of clones was obtained by direct cloning of the cDNA, one of which (PSJ17) showed partial homology with ERV9 pol. Specific primers based on the MSRV-cpol region and on the PSJ17 clone, amplified a 740 bp fragment linking the two independent sequences in RNA extracted from purified virions. PSJ17 was localized on the 3′ side of MSRV-cpol. Further sequence extension on the 5′ side of MSRV-cpol and on the 3′ side of PSJ17, was obtained using RT-PCR approaches on RNA from purified LM7-ike virions produced in MS choroid plexus cultures (4).

[0550] In FIG. 46, the nucleotide sequence corresponding to overlapping clones obtained by sequence extension in the pol gene is represented with the amino acid translation corresponding to the putative open reading frames (ORFs) of the protease and of the reverse-transcriptase. The active site motifs of the protease (PRT) and of the reverse-transcriptase (RT) are underlined. In the C-terminal region of the RT sequence, the dispersed amino acid residues regularly present in retroviral RNase H domains, are also underlined.

[0551] Non-degenerate Primers Detect MSRV-specific RNA in Virions Associated with the Peak of RT-activity and in MS Patients' Plasma

[0552] PCR primers (ST1.1 primer set; positions 603-625/1732-1714, on FIG. 4) based on overlapping clones in the pol gene, amplified a 1.15 kb segment of the RT region from several different isolates obtained from different MS patients. Nested primers (ST1.2; positions 869-889/1513-1490, on FIG.46) generated a 700 bp fragment (FIG. 47) which was more easily visualized by ethidium bromide staining than the first round product generated by ST1.1. The specificity of PCR products was confirmed by stringent hybridization with a peroxidase-1 labeled MSRV-cpol probe (FIG. 44), using the ELOSA technique (21).

[0553] The ST1..1 and 2 primer set was used to detect extracellular MSRV RNA in human plasma, although non-optimal for this application. FIG. 47 illustrates the results of PCR amplification of cDNA derived from 2 MS patient and 2 control plasma samples tested in parallel with cDNA from the sucrose density gradient fractions of an MS choroid plexus isolate. Taq-sequencing of the 700 bp bands confirmed the presence of MSRV sequence. A very faint 700 bp band is also visible in fraction 10 which corresponds to the bottom of the tube where aggregated particles usually sediment. Control RT-PCR for cellular aldolase transcripts on plasma-derived RNA was negative, indicating that the results were not due to cellular RNA released by cell lysis during plasma separation. It should be noted that this PCR technique was not designed for epidemiological studies since its sensitivity is impaired by the length of the cDNA required (1.15 kb).

[0554] Non-degenerate primers amplifying three fragments of the pol gene (the whole protease region, regions A and B of the reverse transcriptase; Cf. FIG. 46) were also used to confirm the presence of MSRV sequences in DNase-treated RNA from MS plasma. These fragments were amplified from the plasma of a further 4 MS patients with active disease. Sequence analysis confirmed that the PRT and RT regions were homologous (>95% and >90% respectively) to MSRV sequences previously obtained on culture virion. No such sequence were detected in plasma from healthy controls (n=4), tested in parallel with MS plasma.

[0555] 3) Discussion

[0556] Phylogeny of MSRV

[0557] From the results of this study, it can be concluded that the virus previously referred to as “LM7” (3, 5, 26) posseses an RNA genome containing the MSRV pol sequences described here. The conserved RT motif of both MSRV and ERV9 is two amino acids shorter than that of other retroviruses, apart from human foamy viruses which nonetheless have a functional RT. The potential ORF encompassing the entire PRT-RT region is consistent with the virion-associated RT-activity detected in sucrose density gradients with infected culture supernatants. Moreover, since we have recently succeeded in expressing a recombinant protein from the sequence of MSRV protease cloned from MS plasma, we can confirm the reality of the potential PRT ORF. Similar cloning and expression of other sequences containing potential ORFs for MSRV proteins, is being undertaken to confirm their ability to encode enzymes and structural proteins of MSRV virions. The phylogenic tree in FIG. 45, based on the most conserved amino acid sequence in retroviruses (VLPQG . . . YXDD), shows that the MSRV pol gene is related to the C-type oncoviruses. Apart from ERV9, the closest known retroviral element is RTLV-H, a human endogenous sequence known to have a subtype with a functional pol gene (32). In the pol region, this phylogenic affiliation to C-type oncoviruses apparently contradicts our previous assumptions based on the general morphology of the particles observed by electron microscopy (EM), which were compatible with a B or D-type oncovirus (3, 5, 26). However, preliminary data on env sequences detected in MSRV virions, would suggest a greater phylogenic proximity to D-type. Such difference in phylogenies of the pol and env genes have been described in MPMV and suggest a recombinatorial origin in D-type retroviruses (33). D to C type morphological conversion is also possible since it has been reported that a single amino acid substitution in the gag protein can convert retrovirus morphology to that of a different type (34).

[0558] Is MSRV an Exogenous Retrovirus Sharing Extensive Homology with a Related Endogenous Retrovirus Family or an Endogenous Retrovirus Producing Extracellular Virions

[0559] Southern blot analysis with an MSRV pol probe under stringent conditions, showed hybridisation with a multicopy endogenous family (data not presented), indicating the existence of endogenous elements more closely related to MSRV than ERV9 itself. Consequently, we were unable to look for a virion-specific provirus in MSRV-producing cells. In agreement with southern blot findings, PCR studies on genomic DNA showed multiple band amplification of MSRV-related endogenous sequences. Since pol is the most conserved retroviral gene, the sequence described here is the least suitable region to discriminate between exogenous and endogenous sequences. It is hoped that sequence information from other parts of the genome may permit such a discrimination, would it be on a tiny portion as has recently been demonstrated for the Jaagsiekte retrovirus (JSRV) of sheep (35). With such sequence data, it would then become possible to identify the MSRV-specific provirus in the genome of virion-producing cell cultures.

[0560] MSRV could represent a virion-producing exogenous member of an ERV9-like endogenous family, just as exogenous strains exist in the well-studied mouse mammary tumour virus (MMTV) and murine leukemia virus (MuLV) retroviral families of mice, and also, in the JSRV retroviral family of sheep (36). Alternatively, it is also conceivable that the extracellular MSRV virions may be produced by a replication-competent endogenous provirus. Whether MSRV is exogenous or endogenous, conceptual similarities exist with the category of retroviruses represented by MuLV, MMTV and JSRV. Unlike defective endogenous elements, this category of agents are known to produce infectious and pathogenic virions, to cause neurological disease (37), solid tumours/leukemias (36, 38) and to express “endogenous superantigens” (39, 40). Furthermore, in MuLV infections, the genetic endogenous retroviral background of the mouse strain can determine susceptibility or resistance to disease (39, 41). Indeed, such interactions between an infectious retrovirus and its endogenous counterpart may be relevant in the pathogenesis of MS, since endogenous retroviral genotypes are not identical in all individuals. A genetic control due to related endogenous retroviral genotypes could therefore contribute to the known hereditary susceptibility to MS (43), if MSRV does indeed play an active role in this disease. Elsewhere, the data in Table 5 suggest that ERV9 elements may be co-expressed, possibly via trans-activation in infected cells, and give rise to heterologous RNA packaging in MSRV virions. Such heterologous packaging is known to occur in other retroviral systems (42).

[0561] A Role for the Numerous Common Viruses Previously Evoked in MS?

[0562] Among the numerous reports of viruses putatively involved in the aetiopathogenesis of MS, a significant proportion focus on two viral families, the paramyxoviridae and the herpesviridae. Regarding the paramyxoviridae, the key observation is of a frequently increased antibody titer to measles virus in MS patients essentially directed, in CSF, against measles fusion protein (44). The existence of aminoacid similarities between conserved domains of the fusion proteins of paramyxoviridae and the transmembrane protein of retroviruses (45), may explain this observation if antigenic cross-reactivity between these two proteins occurred.

[0563] With regard to the herpesvirus family, the involvement of Epstein-Barr Virus (EBV), Herpes Simplex Virus type 1 (HSV-1) and, most recently, Human Herpes Virus 6 (HHV-6) has been proposed (31, 46, 47). From our previous studies and from those of other groups, it appears that herpesviruses may play an important role in MSRV expression: we have shown that HSV-1 immediate-early ICPO and ICP4 proteins can transactivate MSRV/LM7 in vitro (6) and Haahr et al. have proposed an important epidemiological role for EBV, as a co-factor in MS, triggering retrovirus reactivation (31). The recent description by Challoner et al. (47) showing significant expression of HHV6 proteins in MS plaques may also suggest a similar role for HHV6 in the brain.

Example 19

MSRV Genome Detection Technique

[0564] Following 0.4 mm filtration to remove cellular debris and RNase digestion to remove residual non-encapsidated RNA, serum was processed to extract viral RNA by means of adsorption to a silica matrix. Viral RNA was subjected to DNase digestion, then a combined reverse transcription-PCR (RT-PCR) reaction was performed using primers PTpol-A (sense: 5′xxxx3′, SEQ ID NO:183) and PTpol-F (antisense: 5′xxxx3′, SEQ ID NO:184). A second round of amplification with nested primers PTpol-B (sense: 5′xxxx3′, SEQ ID NO:185) and PTpol-E (antisense: 5′xxxx3′, SEQ ID NO:186) generated a 435 bp PCR product which was identified by gel electrophoresis. The specificity of each product was confirmed by dideoxy sequencing. Control reactions without reverse transcriptase were performed to ensure that the products were derived from viral RNA. In addition, to exclude the possibility that the extracted viral RNA might be contaminated with host cell derived nucleic acids, aliquots were tested by nested PCR for the presence of pyruvate dehydrogenase (PDH) DNA and RNA. Samples which generated a signal in either the PDH or the “no-RT” PCR assays were excluded from the analysis.

[0565] Sera from patients with clinically active MS and controls were amplified by RT-PCR and sequenced. Virion associated MSRV-RNA was detected in the serum of 10 of 19 (53%) patients with MS but in only 3 of 44 controls without MS (P=0.0001). The control group consisted of 8 patients (all MSRV-RNA negative) with rheumatological disorders and 36 healthy adults. MSRV-RNA titres in both MS patients and controls were apparently low because even moderate dilution of sera (<10 fold) caused loss of signal.

[0566] In MS patients, detection of MSRV-RNA was not associated with age, sex, disease duration, or MS type, however a significant negative correlation with treatment was observed. 26 serum samples were obtained from the 19 patients; 100% of the sera from untreated patients contained detectable MSRV-RNA whereas it was detectable in only 4 of 19 samples (21%) obtained during treatment with corticosteroids and/or azathioprine (P=0.001).

[0567] The reason for the apparent loss of virion associated MSRV-RNA during immunosuppressive treatment is unknown but the finding is in agreement with the previous observations on the detection of MSRV in cerebrospinal fluid.

10TABLE 7DETECTION OF VIRION ASSOCIATED MSRV-RNA IN MSUNTREATED PATIENTS & CONTROLSPositiveNegativeTotal% PositiveControls without MSa3b4144 7%MS sera untreated at7 0 7100%time of samplingaThe control group consisted of 8 patients with miscellaneous non-MS disorders and 36 healthy adults. bThe detection of MSRV RNA, in plasma of a few controls in conditions which select virion-packaged RNA, is consistent with the knowledge that a virus associated with MS should be present in a minor proportion of apparently healthy population. Indeed, such individuals can be either healthy carriers or be in the pre-clinical (or sub-clinical) phase of the disease which can last for years.

[0568] Method

[0569] Modified SNAP RNA Extraction with Filtration and RNase Digestion

[0570] (All centrifugation are at room temperature)

[0571] Up to 500 microliters of serum is filtered using 0.45 micron spin filters (Nanosep MF from Flowgen Catalogue No. U3-0126 Ref. ODM45). The serum is spun for 5 min at 130,000 g (or for further 10 min if necessary).

[0572] 150 microliters of filtered serum is incubated with 10 units RNase One (Promega Catalogue No.M4261) for 30 min at 37° C.

[0573] The 150 microliters was then extracted using the SNAP RNA extraction kit (Invitrogen) as below:

[0574] 10 micrograms of poly A RNA was added to the 450 microliters of Binding Buffer to act as a carrier; this was then added to the serum and mixed by inversion 6 times; 300 microliters of propan-2-ol was then added and mixed by inversion 10 times 500 microliters was transferred to the SNAP column and spun at 1300 g for 1 min and the flow-through discarded; the remainder was then added to the SNAP column and spun at 1300 g for 1 min and the flow-through discarded; the column was then washed with 600 microliters of Super wash and the flow-through discarded; the column was then washed with 600 microliters of 1×RNA wash and the flow-through discarded; this wash was repeated with a 2 min 1300 g spin and the flow-through discarded; the bound nucleic acid was then eluted by incubating with 135 microliters of RNase free water for 5 min and spun at 1300 g for 1 min.

[0575] 15 microliters of 10×DNAse buffer and 3 microliters (30 units) of DNase I, RNase free (Boehringer Mannheim Cat. No. 776 785) was added and incubated for 30 min at 37° C.; 450 microliters of Binding Buffer was added and mixed by inversion 6 times; 300 microliters of propan-2-ol was then added and mixed by inversion 10 times; 500 microliters was transferred to the SNAP column and spun at 1300 g for 1 min and the flow-through discarded; the remainder was then added to the SNAP column and spun at 1300 g for 1 min and the flow-through discarded; the column was then washed with 600 microliters 1×RNA wash and the flow-through discarded; this wash was repeated with a 2 min 1300 g spin and the flow-through discarded; the bound nucleic acid was then eluted by incubating with 105 microliters of RNase free water for 5 min and spun at 1300 g for 1 min.

[0576] Titan RT-PCR

[0577] RT-PCR was performed using the Titan one tube RT-PCR system (Boehringer Mannheim Cat. No. 1 855 476) 25 microliters of RNA was used in the combined RT-PCR reaction. The total reaction volume was 50 microliters. Promega rRNAsin (10 units) was the RNase inhibitor used. 170 ng of primers SEQ ID NO:183 and SEQ ID NO:184, respectively, were used. A single master mix was prepared and the sample RNA added last. This was performed at room temperature, not on ice.

[0578] The RT step consisted of two sequential 30 min incubations at 50° C. and then 60° C. This was immediately followed by the PCR which had the following steps.

[0579] Initial denaturation of template at 94° C. for 2 min,

[0580] 40 cycles of 94° C. for 30 seconds; 60° C. for 30 seconds 68° C. for 45 seconds,

[0581] 1 cycle of 68° C. for 7 min.

[0582] The second round PCR was performed using the Expand long template PCR system (Boehringer Mannheim Cat. No. 1681 842). 0.5 microliters of the RT-PCR mix was added to 25 microliters of the round 2 PCR mix. Buffer No. 3 and 50 ng of primers B and E were used. The PCR had the following steps:

[0583] 5 cycles of 94° C. for 30 seconds, 60° C. for 30 seconds., 68° C. for 45 seconds,

[0584] 1 cycle of 68° C. for 7 min.

[0585] 1 he PCR products were then run on a 2% agarose gel.

[0586] The no RT controls were performed using “Expand” PCR system for both rounds. The first round was 40 cycles and the second round 20 cycles.

[0587] As a positive control a DNA dilution series was used in both the Rt-PCR and the “no RT” PCR. For a result to be valid the RT-PCR and “no-RT” PCRs had to have detected DNA equivalent to between 1 and 0.1 cells.

[0588] The analysis of PCR products of an approximately 435 bp fragment in the pol region is shown in Table 8.

11TABLE 8ANALYSIS OF PCR PRODUCTS WITH ORF*ExpDiseaseCloneORFFragment (bp)AA-RT Motif Site46-7MS 1+429YGDD 5+429YGDD 8+429YGDD68-1MS41+438YMDD42+438YMDD43+438YMDD*Defective RNA can also be present in circulating virions, since the fidelity of the MSRV reverse transcriptase appears to be low and since recombination events with related endogenous elements can occur. It is then obvious that the intra- and inter- patients variability can be greater than that illustrated in this example, because of these encapsidated defective MSRV RNA copies.

[0589] Table 9, which data have been determined from the alignments of FIGS. 49 to 53, shows a variability:

[0590] between the clones obtained from the same patient plasma sample in the same PCR amplification experiment; this means that the patient possesses a virion population which comprises different MSRV variants for a given time,

[0591] between the sequenced variant populations from different patients; this means that the variants differ from a patient to another one patient.

12TABLE 9Degree of identity (percentage) between nucleotidesequences and between peptide sequences,by direct comparison of said sequences (see FIGS. 49-53)Patient68-146-7Nucleotidebetween SEQ ID NO:169between SEQ ID NO:176sequencesand MSRV-pol (SEQ ID NO:1)and MSRV-pol (SEQ ID NO:1)90.4%b82.5%a92.3%a84%bSEQ ID NOs:170, 171,SEQ ID NOs:177, 178,172 between them179 between them98.6%b94.5%a98.7%a95.1%bPeptidebetween SEQ ID NOs:173,between SEQ ID NOs:180,sequences174, 175 and SEQ ID NO:181, 182 and SEQ ID NO:81%73.5%SEQ ID NOs:173, 174, 175SEQ ID NOs:180, 181, 182between thembetween them97%89%athis percentage is determined on the basis of sequences excluding the primers bthis percentage is determined on the basis of sequences including the primers.

[0592] From FIGS. 53A and 53B, the variability between tested patients sequences can be determined:

[0593] between SEQ ID NO:169 and SEQ ID NO:176: 16,5%a and 14,8%b

[0594] between the peptide sequences obtained from SEQ ID NO:169 and SEQ ID NO:176: 20%.

BIBLIOGRAPHY

[0595] (1) Norrby E., Prog. Med. Virol., 1978; 24, 1-39.

[0596] (2) Johnson R. T., “Handbook of clinical neurology, 47 Demyelinating diseases”, Vinken P. and Bruyn G. W., eds. Amsterdam, Elsevier Science Publishing, 1985, 319-336.

[0597] (3) Perron H. et al., Res. Virol. 1989, 140, 551-561.

[0598] (4) Perron H. et al., “Current concepts in multiple sclerosis” Wietholter et al., eds. Amsterdam, Elsevier, 1991, 111-116.

[0599] (5) Perron H. et al., The Lancet 1991, 337, 862-863.

[0600] (6) Perron H. et al., J. Gen. Virol. 1993, 74, 65-72.

[0601] (7) Fields and Knipe, Fondamental Virology 1986, Rev Press N.Y.

[0602] (8) Nielsen P.E. et al., Science 1991; 254, 1497-1500.

[0603] (9) Maniatis et al., Molecular Cloning, Cold Spring Harbour, 1982.

[0604] (10) Southern. E. M., J. Mol. Biol. 1975, 98, 503.

[0605] (11) Dunn A. R. and Hassel J. A., Cell 1977, 12, 23,

[0606] (12) Shih et al., J. Virol. 1989, 63, 64-75.

[0607] (13) Perron H. et al., Res. Vir. 1992, 143, 337-350.

[0608] (14) Meyerhans et al., Cell 1989, 58, 901-910.

[0609] (15) Linial M. L. and Miller A. D., “Current topics in microbiology and immunobiology. Retroviruses, strategies of replication” vol. 157, 125-152; Swanstrom R. and Vogt P. K., editors, Springer-Verlag, Heidelberg 1990.

[0610] (16) Lori F. et al., J. Virol. 1992, 66, 5067-5074.

[0611] (17) Sambrook J., Fritsch E. F. and Maniatis T., Molecular cloning, a laboratory manual. Cold Spring Harbour Laboratory Press, 1989.

[0612] (18) La Mantia et al., Nucleic Acids Research 1991, 19, 1513-1520.

[0613] (19) Gonzales-Quintial R, Baccala R, Pope R M and Theofilopoulos N, J. Clin. Invest, Vol. 97, Number 5, ppl335-1343, 1996.

[0614] (20) Chomzynski P. and N. Sacchi, Analytical Biochemistry 1987, 162, 156-159.

[0615] (21) F. Mallet et al., Journal of Clinical Microbiology 1993; 31, 1444-1449.

[0616] (22) G. Barany and R. B. Merrifielsd, 1980, In the Peptides, 2, 1-284, Gross E and Meienhofer J, Eds., Academic Press, New York.

[0617] (23) Poser et al., Gbers G. C. eds. The diagnosis of multiple sclerosis Thieme Stratton Inc, New York 1984: 225-229.

[0618] (24) La Mantia et al., Nucleic Acid Research 1989, 17, 5913-22.

[0619] (25) PLAZA, A; KONO, D. H.; THEOFILOPOULOS, A.N. NEW HUMAN Vb GENES AND POLYMORPHIC VARIANTS. J. Imm; 147(12): 4360-4365, 1991.

[0620] (26) H. Perron, In vitro transmission and antigenicity of a retrovirus isolated from multiple sclerosis, Res. Virol. 143, 337-350 (1992).

[0621] (27) J. Garson et al., Development of a “Pan-retrovirus” detection system for multiple sclerosis studies. Acta Neurol. Scand. (in Press).

[0622] (28) F. Mallet, G. Oriol, C. Mary, B. Verrier and B. Mandrand. Continuous RT-PCR and taq DNA polymerase: Characterization and comparison to uncoupled procedures. Biotechniques 18, 678-687 (1995).

[0623] (29) R. Baccala, D. H. Kono, S. Walker, R. S. Balderas and Theophilopoulos. Genomically imposed and somatically modified human thymocyte vb gene repertoires. Proc. Natl. Acad. Sci. USA (1991) 88, 2908.

[0624] (30) Haahr S., Koch-Henriksen N., Moller-Larsen, A. Eriksen L. S. & Andersen H. M. K. Increased risk of multiple sclerosis after late Epstein-Barr virus infection: a historical prospective study. Multiple Sclerosis 1, 73-77 (1995).

[0625] (31) Haahr S et al. A putative new retrovirus associated with multiple sclerosis and the possible involvement of Epstein-Barr virus in this disease. Ann. NY Acad. Science. 724, 148-156 (1994).

[0626] (32) Wilkinson D. A., Goodchild N. L., Saxton T. M., Wood S. & Mager D. L. Evidence for a functional subclass of the RTLV-H family of human endogenous retrovirus-like sequences. J. Virol. 67, 2981-2989 (1993).

[0627] (33) Sonigo P., Barker C., Hunter E. and Wain-Hobson S. Nucleotide sequence of Mason-Pfizer monkey virus: an immunosuppressive D-type retrovirus. Cell 45, 375-85 (1986).

[0628] (34) Rhee S. S., and Hunter E. A single amino acid substitution within the matrix protein of a D-type retrovirus converts its morphogenesis to that of a C-type retrovirus. Cell 63, 77-86 (1990).

[0629] (35) Bai J., Zhu R. Y., Stedman K., Cousens C., Carlson J., Sharp J. M. and DeMartini J. C. Unique long terminal repeat U3 sequences distinguish exogenous Jaagsiekte sheep retroviruses associated with ovine pulmonary carcinoma from endogenous loci in the sheep genome. J. Virol. 70, 3159-3168 (1996).

[0630] (36) Palmarini M., Cousens C., Dalziel R. G., Bai J., Stedman K., DeMartini J. C. and Sharp J. M. The exogenous form of Jaagsiekte retrovirus is specifically associated with a contagious lung cancer of sheep. J. Virol. 70, 1618-1623 (1996).

[0631] (37) Portis J. L. Wild mouse retrovirus: pathogenesis. in “Retrovirus infections of the nervous system”. Oldstone M. B. A. and Koprowsky H. Eds. Current topics in microbiology and immunology, no 160, p. 11-27. (Springer-Verlag, Berlin 1990).

[0632] (38) Gardner M. B., Chivi A., Dougherty M. F., Casagrande J & Estes J. D. Congenital transmission of murine leukaemia virus from wild mice prone to development of lymphoma and paralysis. J. Natl. Cancer Inst. 62, 63-69 (1979).

[0633] (39) Marrack P., Kushnir E. & Kappler J. A maternally inherited superantigen encoded by a mammary tumor virus. Nature 349, 524-526 (1991).

[0634] (40) Hügin A. W., Vacchio M. S. & Morse H. C. A virus-encoded superantigen in a retrovirus-induced immunodeficiency syndrome of mice. Science 252, 424-427 (1991).

[0635] (41) Gardner M. B. Genetic resistance to a retroviral neurologic disease in wild mice, in “Retrovirus infections of the nervous system” Oldstone M. B. A. and Koprowsky H. Eds. Current topics in microbiology and immunology, no 160, p. 3-10. (Springer-Verlag, Berlin 1990).

[0636] (42) Linial M. L. & Miller A. D. Retroviral RNA packaging: sequence requirements and implications, in “Retroviruses-strategies of replication” Swanstrom R. & Vogt P. K. Eds. Current topics in microbiology and immunology, no 157, p. 125-152. (Springer-Verlag, Berlin 1990).

[0637] (43) Bell J. I. and Lathrop G. M. Multiple loci for multiple sclerosis. Nature Genetics 13, 377-78 (1996).

[0638] (44) Dhib-Jalbut S., Lewis K., Bradburn E., McFarlin D. E. and McFarland H. F. Measles virus polypeptide-specific antibody profile in multiple sclerosis. Neurology, 1990; 40 : 430-435.

[0639] (45) Gonzalez-Scarano F., Waxham M. N., Ross A. M. and Hoxie J. A. Sequence similarities between human immunodeficiency virus gp41 and Paramyxovirus fusion proteins . AIDS, Res. Hum. Retrov. 1987; 3: 245-252.

[0640] (46) Bergström,T., Andersen, O. & Vahlne A.(1989). Isolation of herpes virus type 1 during first aittack of multiple sclerosis. Annales Neurology 26 , 283-285.

[0641] (47) Challoner P. B. et al. Plaque-associated expression of human herpesvirus 6 in multiple sclerosis. Proc. Natl. Acad. Sci. USA 92, 7440-7444 (1995).

[0642] (48) A. Gessain et al; Antibodies to Human T-Lymphotrophic Virus type-I in patients with tropical spastic paraparesis. Lancet 2, 407-410 (1985).

[0643] (49) H. Perron, J. A. Garson, F. Bedin et al., Molecular identification of a novel retrovirus repeatedly isolated from patients with multiple sclerosis. Proc. Nat. Acad. Sci. USA 94:7583-7588 (1997).

	Number	Date	Country
Parent	08756429	Nov 1996	US
Child	08979847	Nov 1997	US

ISOLATED NUCLEOTIDE SEQUENCES ASSOCIATED WITH MULTIPLE SCLEROSIS OR RHEUMATOID ARTHRITIS AND A PROCESS OF DETECTING

Information

Publication Number

Date Filed

Date Published

Inventors

CPC

US Classifications

International Classifications

Abstract

Description

Claims

Parent Case Info

Continuation in Parts (1)