Patent Application
20130189308
Yersinia pestis is the causative agent of bubonic and pneumonic plague. Bacillus anthracis is the causative agent for the anthrax disease. The Centers for Disease Control and Prevention (hereinafter “CDC”) lists Y. pestis and B. anthracis as two of the six Category A biological agents that pose a risk to national security.
Yersinia pestis
The etiologic agent of plague is the Gram-negative bacterium Yersinia pestis. The natural route of transmission of Y. pestis from one animal host to another is either directly or via a flea vector. Plague is endemic in some regions of the world and outbreaks occasionally occur as a consequence of natural disasters. Y. pestis is also a concern as one of the microorganisms with potential for use against civilian or military populations as a biological warfare/biological terrorism agent. In such a situation, the pneumonic form of plague would be the most likely outcome. This form of plague is particularly devastating because of the rapidity of onset, the high mortality, and the rapid spread of the disease. Immunization against aerosolized plague presents a particular challenge for vaccine developers. There is currently no vaccine for plague.
Both live attenuated and killed plague vaccines have been used in man, although questions remain about their safety and relative efficacy, especially against the pneumonic form of infection. Since plague remains endemic in some regions of the world, and because of the possibility of the illegitimate use of Y. pestis as a biological warfare agent, development of improved vaccines against plague is a high priority. The ideal vaccine should be deliverable in a minimum of doses and quickly produce high titer and long-lasting antibodies. Moreover, such a vaccine should protect against aerosolized transmission of Y. pestis.
The two most recently described approaches to development of improved plague vaccines are 1) attenuated mutants of Y. pestis and 2) subunit vaccines. The potential efficacy of attenuated mutants of Y. pestis as vaccines is supported by experience with the live attenuated vaccine strain EV76. This vaccine has been in use since 1908 and is given as a single dose Immunization of mice with EV76 induces an immune response and protects mice against subcutaneous and inhalation (aerosolized) infection. However, this vaccine strain is not avirulent and has an unacceptable safety profile. Moreover, multiple variants of the classical EV76 strain exist that differ significantly in passage history and genetic characteristics. Recent studies have focused on creating defined genetically attenuated mutants of Y. pestis, similar to those created in other Gram-negative bacteria (i.e., Salmonella spp.). For unknown reasons, genetic mutations, which markedly attenuate Salmonella spp. do not attenuate Y. pestis. For instance, an aroA mutant of Y. pestis was fully virulent in the murine model of disease but avirulent in guinea pigs.
A number of potential subunit vaccines have been evaluated for immunogenicity and protective efficacy against Y. pestis. The two most promising are F1 and V. F1 is a capsular protein located on the surface of the bacterium and the V antigen is a component of the Y. pestis Type III secretion system. These proteins have been produced recombinantly and induce protective immune responses when administered individually. A combination or fusion of F1 and V may have an additive protective effect when used to immunize humans against plague. It is thought that F1-V fusion protein should provide protection against both subcutaneous and aerosol challenge, and will have the potential to provide protective immunity against pneumonic as well as bubonic plague due to either wild type F1+ Y. pestis or to naturally occurring F1-variants. To date no one has been able to express the F1-V fusion protein in transgenic chloroplast. Such an accomplishment would provide a large supply of high-quality antigen for vaccines.
Bacillus anthracis
Bacillus anthracis is the organism that causes the anthrax disease. It is a Gram-positive, nonmotile, aerobic or facultatively anaerobic, spore-forming bacterium. The spores are about 1 .mu.m in size, extremely hardy, resistant to gamma rays, UV light, drying, heat, and many disinfectants. Spores germinate upon entering an environment rich in glucose, amino acids, and nucleosides, such as in animal and human tissues and blood. The vegetative cells enter the spore state when the nutrients are exhausted or when the organisms are exposed to molecular oxygen in the air.
Anthrax is typically a disease of animals, especially herbivores such as cows, sheep, and goats. It affects humans through contact with the spores in one of three ways. Cutaneous anthrax occurs when the spores enter the body through a cut or an abrasion on the skin. Gastrointestinal anthrax occurs when the spores enters the body through consumption of contaminated meat products. Inhalation anthrax occurs when the spores enter the body through inhalation of the spores.
When spores enter the body, macrophages engulf them, migrate to regional lymph nodes and the spores germinate into vegetative bacteria. Macrophages release the vegetative bacteria and they spread through the blood and lymph until there are up to 10.sup.8 bacilli per milliliter of blood. The exotoxins are produced from bacteria and they lead to symptoms and possible death. Spores can survive in the lungs or lymph nodes up to 60 days before germination occurs. In animal experiments, it has been seen that once toxin secretion has reached a critical threshold, death will occur, even if the blood is rendered sterile through the use of antibiotics. From primate studies, the estimated lethal dose of inhaled anthrax spores sufficient to kill 50% of humans exposed to it (the LD50) is 2,500-55,000 spores.
The CDC lists anthrax as a category A disease agent and estimates the cost of an anthrax attack would be $26.2 billion per 100,000 persons exposed. The only vaccine licensed for human use in the U.S., Biothrax (formerly Anthrax vaccine adsorbed, or AVA), is an aluminum hydroxide-adsorbed, formalin-treated culture supernatant of a toxigenic, nonencapsulated, non-proteolytic strain of Bacillus anthracis. In addition to the immunogenic protective antigen (PA), the vaccine contains trace amounts of edema factor (EF) and lethal factor (LF) that may contribute to the local reactions seen in 5-7% of vaccine recipients, or reported to be toxic causing side-effects. There is a clear need and urgency for an improved vaccine for anthrax and for improved production methods that allow it to be mass-produced at reasonable cost.
There are two main virulence factors associated with B. anthracis, the polyglutamyl capsule which is believed to prevent the vegetative bacterial cells from being phagocytized and the exotoxins. Two different exotoxins are produced by three factors. PA binds to the host cell, LF is a zinc metalloprotease which inactivates mitogen-activated protein kinase. The edema toxin is formed when PA binds to EF. This toxin increases cyclic AMP (cAMP) levels in the cell which upsets the water homeostasis resulting in accumulation of fluid called edema. The lethal toxin is formed from binding of PA and LF. This toxin stimulates macrophages to release interleukin-1b, tumor necrosis factor a, and other cytokines which contribute to shock and sudden death.
Anthrax has become a serious threat due to its potential use in bioterrorism and recent outbreaks among wild-life in the United States. Concerns regarding vaccine purity, the current requirement for six injections followed by yearly boosters, and a limited supply of the key protective antigen (PA), underscore the urgent need for an improved vaccine.
The present invention pertains to vaccines for conferring immunity in mammals to infective pathogens, as well as vectors and methods for plastid transformation of plants to produce protective antigens and vaccines for oral delivery. The invention further provides transformed plastids having the ability to survive selection in both the light and the dark, at different developmental stages by using genes coding for two different enzymes capable of detoxifying the same selectable marker, driven by regulatory signals that are functional in proplastids as well as in mature chloroplasts. The invention utilizes antibiotic-free selectable markers to provide edible vaccines for conferring immunity to a mammal against Bacillus anthracis, as well as Yersina pestis. The vaccines are operative by parenteral administration as well. The invention also extends to the transformed plants, plant parts, and seeds and progeny thereof. The invention is applicable to monocot and dicot plants.
The concept of chloroplast genetic engineering, allows the introduction of isolated intact chloroplasts into protoplasts and regeneration of transgenic plants. Early investigations involving chloroplast transformation focused on the development of in organello systems using intact chloroplasts capable of efficient and prolonged transcription, translation, and expression of foreign genes in isolated chloroplasts. However, the discovery of the gene gun as a transformation device made it possible to transform plant chloroplasts without the use of isolated plastids and protoplasts. Chloroplast genetic engineering has been accomplished in several phases. Studies have been made on the transient expression of foreign genes in plastids of monocots and dicots. Unique to the chloroplast genetic engineering is the development of a foreign gene expression system using autonomously replicating chloroplast expression vectors. Stable integration of a selectable marker gene into the tobacco chloroplast genome was also accomplished using the gene gun. Recently, useful genes conferring valuable traits via chloroplast genetic engineering have been demonstrated. Plants resistant to Bacillus thuringiensis (Bt) sensitive and resistant insects were obtained by integrating the cryIAc and cry2A genes into the tobacco chloroplast genome.
Chloroplast genomes of plants have also been genetically engineered to confer herbicide resistance where the introduced foreign genes were maternally inherited. This was a significant step in the development of commercially viable genetically modified plants because it alleviates any concerns over the problem of out-crossing traits with weeds or other crops.
For large-scale foreign protein production, plants are an ideal choice due to the relative ease of genetic manipulation, rapid scale up (million seeds per plant), large biomass, and the potential to find alternative uses for various crops. A remarkable feature of chloroplast genetic engineering is the observation of exceptionally large accumulation of foreign proteins in transgenic plants (as much as 46% of CRY protein in total soluble protein) even in bleached old leaves. Using chloroplast transformation technology, large quantities of protective antigen can be produced in transgenic plants, due to the presence of thousands of copies of transgenes per cell as opposed to only a few copies in nuclear transgenic plants. By “protective antigen” is meant that the antigen elicits an immunogenic response in mammals when administered by an appropriate route in an appropriate amount. Transgenic chloroplast technology has been used to hyper-express bacterial proteins—up to 46% of total soluble protein from Bacillus genes, the highest ever reported in transgenic plants. However, large heterologous proteins are not always processed correctly. Furthermore, such proteins are subject to attack by proteolytic enzymes after formation. The cholera toxin B subunit is about 11 kilodaltons in size. The anthrax protective antigen is about 83 kd in size, presenting a significant challenge to production in a chloroplast. A similar challenge is presented by the F1-V antigen, which is a fusion protein. Such fusion proteins have not heretofore been successfully expressed in chloroplasts. Chloroplasts are prokaryotic in nature and express native bacterial genes (like B subunit of cholera toxin) at very high levels (410-fold higher than nuclear expression). Production in chloroplasts is in sharp contrast to nuclear expression, that often requires extensive codon modifications because of high AT content, unfavorable codons, presence of mRNA destabilizing sequences, and cryptic polyadenylation or splice sites. Chloroplast transformation typically utilizes two flanking sequences that, through homologous recombination, insert transgenes into spacer regions between functional genes of the chloroplast genome, thus targeting transgenes to a known location. This eliminates the “position effect” and gene silencing frequently observed in nuclear transgenic plants. Chloroplast genetic engineering is an environmentally friendly approach, minimizing concerns of out-cross of introduced traits via pollen to weeds or other related crops. The chloroplast genome may be engineered without the use of antibiotic resistant genes as well for the development of edible vaccines. The term “edible vaccine” as used herein refers to a substance which may be given orally which will elicit a protective immunogenic response in a mammal.
The difficulty of engineering the chloroplast genome without antibiotic resistant genes has recently been overcome by modifying chloroplasts without these genes. Engineering genetically modified crops without these genes eliminates their potential transfer to the environment and to microbes in the gut. Antibiotic-free selection can be accomplished by using the betaine aldehyde dehydrogenase (BADH) gene from spinach as a selectable marker. Specifically, the Applicant's published application, WO01/64023, which is hereby incorporated by reference, demonstrates using an antibiotic free selectable marker. The selection process involves conversion of toxic betaine aldehyde (BA) to non-toxic glycine betaine, which also serves as an osmoprotectant and helps confer drought tolerance.
The Applicant has transformed the chloroplast of edible monocot and dicot species, as is illustrated in the accompanying Figures. Specifically, the figures illustrate the stable transformation of carrot and corn chloroplast genomes, which has not previously been accomplished. The transformation of carrot, tomato, and corn allow the production of edible vaccines. These transformed plants also allow the purification and use of the antigens produced by these plants as high purity parenteral vaccines. However, the production of edible vaccines is preferred for their ease of use and low cost.
Functions of the genes in the carrot chloroplast transformation vectors were tested in E. coli. For observing GFP expression, cells were plated on LB agar (Amp) plates and incubated at 37.degree. C. overnight. Cells harboring pDD34-ZM-GFP-BADH were seen to fluoresce when exposed to UV light, as is seen in
The selection in
Functions of the genes in the carrot chloroplast transformation vectors were tested in E. coli. For observing GFP expression, cells were plated on LB agar (Amp) plates and incubated at 370 C overnight. Cells harboring pDD37-DC-GFP-BADH were seen to fluoresce when exposed to UV light (A). To test the aadA gene expression, cells harboring pDD36-DC-aadA-BADH plasmid were plated on LB agar plates containing spectinomycin (100 mg/ml) and incubated at 370 C overnight. Transformed cells grow on spectinomycin (B).
Functions of the genes in the carrot chloroplast transformation vectors were tested in E. coli. For observing GFP expression, cells were plated on LB agar (Amp) plates and incubated at 37.degree. C. overnight. Cells harboring pDD34-ZM-GFP-BADH were seen to fluoresce when exposed to UV light as is seen in
The aforementioned transformation of maize and carrot chloroplast provides a novel approach for improved vaccines with the creation of an edible vaccine, which provides a heat stable environment, allows easy administration at lower cost, and stimulates the mucosal and systemic immune responses. There still remain a number of hurdles which need to be overcome, such as the fact that protective antigens tend to be very large and unstable proteins (83 kDa); such large proteins have never been expressed before in transgenic chloroplasts, and to date the Applicant is unaware of the expression and assembly of heptamers in transgenic chloroplasts.
Based upon the vector construct described above and set-forth in further detail in this application, it is possible to have a general construct in edible plants where it can be determined through experimentation which construct can elicit the strongest immune response to bacterial toxin challenges such as, but not limiting, plague or anthrax. As an example,
Edible vaccines are heat stable unlike conventional vaccines which tend to be heat sensitive. An edible vaccine has a longer shelf life and does not require expensive refrigeration equipment. The heat sensitivity of the conventional vaccine makes it expensive, capricious and destination limited with a series of refrigeration steps during the transportation process from manufacture to final destination. Another major cause for the high cost of biopharmaceutical production is purification; for example, during insulin production, chromatography accounts for 30% of the production cost and 70% of the set up cost. Therefore, oral delivery of properly folded and fully functional biopharmaceuticals could potentially reduce production costs by 90%. In one study it was estimated that the banana could deliver a vaccine (Hepatitis B) at two cents per dose compared to approximately $125 per dose for conventional Hepatitis B vaccine injection. Bioencapsulation of pharmaceutical proteins within plant cells offers protection against digestion in the stomach while allowing successful delivery. In three human clinical trials performed with plant derived vaccines, plant cells proved sufficient for vaccinogen protection against digestion, and the resulting vaccinogen induced systemic and mucosal immune responses without the aid of adjuvants. Oral administration of PA has also been reported to offer protection against B. anthracis using an attenuated Salmonella strain expressing PA. However, in all these studies the limitation is the low levels of antigen expression which is overcome by the present invention.
It should be understood that the examples set forth herein are non-limiting examples, and the vectors can be used on a number of plants. The following description is capable of being utilized as illustration and guide work for transformation of plants to express any bacterial antigen gene. It can also be used to express viral antigen genes.
The pLD-JW1 vector (8.3 kb, see
The aadA gene conferring spectinomycin resistance was used for selection of transgenic shoots. It is noted however, that the use other antibiotic-resistant genes or an antibiotic free selectable marker such as BADH, could also be used in the construction of the vector. The pag gene coding for anthrax protective antigen was regulated by the psbA 5′ and 3′ elements. The 5′UTR from psbA, including its promoter, was used for transcription and translation enhancement and the 3′UTR region conferred transcript stability.
One skilled in the art would recognize that an alternative chloroplast vector can be constructed without the use of any promoter, because all polycistronic spacer regions contain a native promoter which can be used to drive transcription.
A second construct was made by adding orf1,2 from B. thuringiensis to the pLD-JW1 vector, forming the pLD-JW2 vector (see
Transgene Integration into the Chloroplast Genome by PCR Analysis:
Chloroplast transgenic lines were generated by particle bombardment as described previously. After bombarding Nicotiana tabacum cv. Petit Havana tobacco leaves with the chloroplast vectors, the leaves were grown on selective medium containing 500 .mu.g/ml spectinomycin. Three different genetic events can produce spectinomycin-resistant tobacco shoots: (1) transgene integration into chloroplasts, (2) into the nuclear genome or (3) spontaneous mutants. PCR with two specific primers, 3P and 3M, allowed identification of shoots having the desired chloroplast transgene integration. The 3P primer annealed to the native chloroplast genome and the 3M primer annealed to the aadA gene (see
Southern blots were done to further verify that the transgenes had been integrated into the chloroplast genome and to determine homoplasmy (containing only transformed chloroplast genomes) or heteroplasmy (containing both transformed and untransformed chloroplast genomes). Total plant DNA was digested with the enzyme BglII which generated a 4.4-kb fragment in wild type, 5.2-kb and 3-kb fragments in pLD-JW1 transgenic lines, and 6.8-kb and 3-kb fragments in pLD-JW2 transgenic lines when hybridized with a 0.81-kb probe made from chloroplast flanking sequences (see
Western blots were performed on transgenic lines containing the two different constructs. Full length 83-kDa polypeptide was detected/on blots, confirming PA expression in transgenic lines and absence of unique proteases that cleave PA in plant cells (see
The T.sub.1 transgenic lines showed a greater amount of PA in the pLD-JW1 lines as compared to the pLD-JW2 lines. Additional western blots were done comparing two different detergents in the extraction buffers, CHAPS and SDS, and both were found to extract PA equally well (see
In order to quantify the amount of PA in transgenic chloroplasts, western blots were used to observe varying dilutions of the crude extract. PA was quantified using gel documentation software (Bio-Rad). Based on western blot analysis, pLD-JW1 T.sub.1 transgenic lines showed 44 .mu.g PA/g of fresh tissue (22 .mu.g/ml). An average tobacco leaf weighed 6.5 g; therefore 286 .mu.g PA could be expressed per leaf. The pLD-JW2 transgenic lines showed lower levels of PA accumulation, probably due to interference of both UTRs, resulting in decrease in translation. We have observed recently that the combination of ORF-psbA5′UTR decreases expression of human serum albumin in transgenic chloroplasts.
The psbA regulatory sequences, including the promoters and UTRs, have been shown to enhance translation and accumulation of foreign proteins under continuous light. Therefore, pLD-JW1 T.sub.1 transgenic plants were placed in continuous light and young, mature, and old leaves were collected after 3 or 5 days of continuous illumination. Western blots were performed using different dilutions of crude plant extracts (see
PA accumulation was visualized in crude plant extracts by Coomassie staining. When a capture ELISA was used to quantify PA, it appeared that PA constituted a large percentage of total soluble protein in some extracts. While these values may reflect detection of partially cleaved PA, they do not result from non-specific interaction of the antibodies with any other proteins, because no signal was detected in untransformed plants. However, the data set forth herein is from quantitative scanning of polyacrylamide gels and not from the capture ELISA.
Supernatant and homogenate samples from both To constructs, pLD-JW1 and pLD-JW2, were tested. Two different buffers were used to extract proteins—one contained CHAPS detergent and one did not have any detergent. The PA produced in chloroplast transgenic lines was able to bind to the anthrax toxin receptor, be cleaved to the 63-kDa fragment, heptamerize, bind LF, be internalized and lyse the macrophage cells. Therefore the transgenic plants were shown to produce fully functional PA (see
The threat of biological warfare and terrorism is real. The most effective way to prevent or deter effective use of anthrax as a weapon would be to produce an efficacious and inexpensive vaccine. Plants are an inexpensive and easy way to produce recombinant proteins, without human or animal pathogen contamination. Because one acre of tobacco yields up to 40 tons of fresh leaves (40,000 kg in three cuttings), the production could be up to 6.24 kg PA per acre based on expression levels reported in this manuscript. There is less than 50% loss during purification from plant extracts (loss of foreign protein is generally between 30 and 90%), and at 5 .mu.g PA per dose (which is roughly equivalent to prior art vaccine which is in a range of 1.75 to 7 .mu.g PA), one can produce 600 million doses of vaccine per acre of tobacco. Thus a few acres of transgenic tobacco can meet the world's need for the anthrax vaccine.
Sterile Nicotiana tabacum cv. Petit Havana tobacco leaves were bombarded using the Bio-Rad PDS-1000/He biolistic device as previously described. The bombarded leaves were placed on RMOP medium containing 500 .mu.g/ml spectinomycin for two rounds of selection on plates and subsequently moved to jars of MSO medium containing 500 .mu.g/ml spectinomycin.
DNA was extracted from tobacco leaves using Qiagen DNeasy Plant Mini Kit available from Qiagen, Valencia, Calif. PCR was performed using the Perkin Elmer Gene Amp PCR System 2400 (available from Perkin Elmer, Chicago, Ill.). PCR reactions contained template DNA, 1.times.Taq buffer, 0.5 mM dNTPs, 0.2 mM 3P primer, 0.2 mM 3M primer, 0.05 units/.mu.l Taq Polymerase, and 0.5 mM MgCl.sub.2. Samples were run for 30 cycles as follows: 95.degree. C. for 1 min, 65.degree. C. for 1 min, and 72.degree. C. for 2 min with a 5 min ramp up at 95.degree. C. and a 72.degree. C. hold for 10 min after cycles complete. PCR products were separated on 1% agarose gels.
Total plant DNA was digested with BglII and run on a 0.8% agarose gel at 50 V for 2 hours. The gel was soaked in 0.25 N HCl for 15 minutes and then rinsed 2.times. with water. The gel was soaked in transfer buffer (0.4 N NaOH, 1 M NaCl) for 20 minutes and then transferred overnight to a nitrocellulose membrane. The membrane was rinsed twice in 2.times.SSC (0.3 M NaCl, 0.03 M Sodium citrate), dried on filter paper, and then crosslinked in the GS GeneLinker (Stratagene, La Jolla, Calif.). The flanking sequence probe was made by digesting pUC-CT vector DNA with BamHI and BglII to generate a 0.81 kb probe. Lee, S. B., Byun, M. O., Daniell, H. Accumulation of trehalose within transgenic chloroplasts confers drought tolerance. Molecular Breeding (in press) (2002). The pag probe was made by digesting pag with NcoI to generate a 0.52 kb probe. The probes were labeled with .sup.32P using the ProbeQuant G-50 Micro Columns (Amersham, Arlington Heights, Ill.). The probes were hybridized with the membranes using Stratagene QUICK-HYB hybridization solution and protocol (Stratagene, La Jolla, Calif.).
Approximately 100 mg of leaf tissue was ground in liquid nitrogen with a mortar and pestle and stored at −80.degree. C. for several months. When it was time to extract the proteins, the powder was removed from −80.degree. C. and 200 .mu.l of plant extraction buffer was added and mixed with mechanical pestle (0.1% SDS, 100 mM NaCl, 200 mM Tris-HCl pH 8.0, 0.05% Tween 20, 400 mM sucrose, 2 mM PMSF). The plant extract was then centrifuged for 5 minutes at 10,000.times.g to pellet the plant material. The supernatant containing the extracted protein was transferred to a fresh tube and an aliquot was taken out, combined with sample loading buffer, boiled, and then run on 8% SDS-PAGE gels for one hour at 80 V, then 2 hours at 150 V. Gels were transferred overnight at 10 V to nitrocellulose membrane. The membrane was blocked with PTM (1.times.PBS, 0.05% Tween 20, and 3% dry milk). PA was detected with anti-PA monoclonal antibody 14B7. Secondary antibody used was goat anti-mouse IgG conjugated to horseradish peroxidase (American Qualex Antibodies, A106PN).
The stability assay utilized SDS buffer (0.1% SDS, 100 mM NaCl, 10 mM EDTA, 200 mM Tris-HCl pH 8.0, 0.05% Tween 20, 14 mM .beta.-mercaptoethanol, 400 mM sucrose, 2 mM PMSF) and CHAPS buffer (4% CHAPS, 100 mM NaCl, 10 mM EDTA, 200 mM Tris-HCl pH 8.0, 14 mM .beta.-mercaptoethanol, 400 mM sucrose, 2 mM PMSF). Two hundred .mu.l of each buffer was added to 100 mg powdered leaf tissue. For supernatant fractions, the extraction was centrifuged at 10,000.times.g for 5 minutes and supernatant was removed. For homogenate, the entire extract was used. The samples were stored at 4.degree. C. and −20.degree. C. for two days. The rest of the western protocol was the same as described above. Dilutions of 1:10 and 1:20 of the protein extracts were made and run on the gel along with 20, 10, and 5 ng of PA protein standards to generate a standard curve for protein quantification. After the film was developed, the PA was quantified using the Gel-Doc.
Approximately 100 mg of powdered leaf tissue was extracted with 200 .mu.l of extraction buffer. For the supernatant fraction, the buffer and tissue were centrifuged for 5 minutes at 10,000.times.g and the supernatant was placed in a new tube. For the homogenate, it was all of the tissue and the buffer. RAW 264.7 macrophage cells were plated in 96-well plates in 120 .mu.l DMEM medium and grown to 50% confluence. The medium was aspirated and replaced with 100 .mu.l medium containing 250 ng/ml LF. The control plate received medium with no LF to test toxicity of plant material and buffers. In separate 96-well plates, the plant samples were diluted serially 2-fold and 40 .mu.l of the dilutions were transferred onto the RAW cells so the top row had plant extract at 1:14 dilution. MTT (3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazolium bromide) was added after 5-10 hours to assess cell death. Gu, M. L., Leppla, S. H., Klinman, D. M. Protection against anthrax toxin by vaccination with a DNA plasmid encoding anthrax protective antigen (Vaccine. 17, 340-344 (1999)).
Transformation of the Tomato Chloroplast Genome
Prior to the creation of the pTom-BADH2-G10-pag˜8.8 kb vector construct (
After successful construction and integration into the tomato chloroplast genome using the pLD Tom-BADH vector of
To apply the plastid transformation technology to edible plants to produce an edible vaccine, a first generation tomato vector is constructed containing pag. TrnI and trnA are homologous recombination regions in tomato; 5′UTR from psbA is used for translation enhancement and also contains it's own promoter; BADH gene confers Betaine Aldehyde (BA) resistance; G10 is a translation enhancer from the T7 bacteriophage; pag codes for the protective antigen, and T is the psbA terminator.
The pDD11 vector is cleaved with NdeI & NotI to remove the gene and leave opened pBlue-G10 region of the vector. The pBlue-T7-pag vector is then cleaved with NdeI & NotI to remove the pag gene .about.2.2 kb. The pag gene is ligated into the opened pBlue-G10 vector, and the resulting pBlue-G10-pag is cleaved with SmaI & NotI to remove the G10-pag .about.5.2 kb segment from the pBlue-G10-pag vector. Finally the pTom-BADH2 vector is cleaved with SmaI and NotI, and then the G10-pag fragment is ligated into the vector creating a pTOM-BADH2-G10-pag˜8.8 kb (
After bombarding the tomato cotyledons (seed leaves or embryonic leaves) with the tomato construct vector, pTOM-BADH2-G10-pag˜8.8 kb, the cotyledons are put on selection media containing Betaine Aldeyhyde (BA) and calli formed (
Anthrax vaccine studies focused on mucosal and transcutaneous immunization with rPA as a vaccine antigen when delivered in conjunction with a novel adjuvant, designated LT(R192G). This adjuvant was shown to be effective at augmenting protection against a variety of bacterial, viral, and fungal pathogens when delivered with appropriate antigens intranasally, orally, rectally, or transcutaneously. This adjuvant was developed by the Clements laboratory at Tulane University Health Sciences Center with funding from NIH and the Department of Defense and has been evaluated in a number of Phase I and Phase II clinical trials. In rPA studies, a number of immunologic outcomes were measured, but the studies focused primarily on those associated with protection against inhaled pathogens—serum and bronchial lavage (BAL) fluid antibodies. It was demonstrated that mucosal and transcutaneous immunization of mice with rPA induces high levels of antigen-specific antibodies in serum and in bronchoalveolar lavage fluids. Moreover, circulating anti-rPA antibodies are able to neutralize the cytotoxic effect of anthrax Lethal Toxin when tested in macrophage cytotoxicity assays.
Since the expression of the foreign protein is desired in chromoplasts of tomato fruit, the gene of interest needs to be under the control of a regulatory sequence that is free from cellular control. In this context, examples of suitable candidate regulatory sequences are the T7 gene 10 leader sequence and cry2Aa2 UTR. The T7 gene 10 leader sequence is used to express foreign proteins in transgenic chromoplasts. The cry2Aa2 UTR accumulates foreign protein in chromoplasts as efficiently as the psbA UTR. The selectable marker for the future generation vectors can optionally be the BADH gene under the regulation of psbA promoter and 5′UTR as psbA is one of the most efficiently translated chloroplast genes in green tissues. Since green tissue is used for introducing the transgene into the chloroplasts in tomato, it is ideal to use the light regulated psbA UTR for the selectable marker.
The cotyledons and leaf material are bombarded using the particle gun. After bombardment the explants are then incubated in the dark for 48 h. The cotyledons and leaves are then cut into small pieces and placed onto RMOP media supplemented with 2.5, 5.0 and 7.5 mM of betaine aldehyde for regeneration. In the case of cotyledons, the concentration of 2.5 nm BA is optimal, but not required, as regeneration of putative transformants could be observed after two weeks. Specifically, there is no response on media having higher concentrations of 5.0 and 7.5 mM BA. With leaves, the concentration of 1 and 1.5 mM is optimal for pLD-Tom-BADH and pLD-Tom-UTR-BADH respectively.
Selection is optimally performed in the presence of BA, but has also been performed in the presence of antibiotics. After selection, PCR analysis is performed as described above, as is well understood in the art. Finally Southern and northern blot analyses are performed as described above, and well understood in the art, to determine the amount and level of transformation in the chloroplast genome.
Carrot (Daucus carota L.) is a biennial plant grown for its edible taproot. It is one of the most important vegetables used worldwide for human consumption. Carrot taproots are rich in vitamin A and fiber and are ideal to genetically manipulate in the chromoplast for the production of edible vaccines. For transformation of carrot, flanking sequences (trnI and trnA) are amplified with the help of PCR. Duration for regeneration of carrot plantlets is shortened to four months from eight months when replacing the antibiotic selection with BA. The same chloroplast constructs as described above for tomatoes are used for carrot except that homologous recombination regions i.e. trnI and trnA are derived from carrot chloroplast DNA. The advantage of using carrot is that from small clusters of cells or a small piece of carrot one can get thousands of transgenic plants in a limited space. Moreover, single cells are directly in contact with the culture media surface. Therefore, even a small quantity of selecting agent (betaine aldehyde) is more effective in comparison to other larger tissues. Carrot is easy to store for long periods of time.
Seeds of carrot (Daucus carota L. cv Nantaise) are sown in pots and placed under a growth chamber with appropriate growth conditions for as little as four weeks to as long as a year. The hypocotyls are then cut into segments of 1 cm long and placed either on semi-solid callus induction medium or in 50 ml MS medium containing 3% sucrose, 0.1 mg/l 2,4-dichlorophenoxyacetic acid (2,4-D) having pH 5.7. After 3 weeks of continuous shaking at 24.degree. C. and 120 rpm, liberated cells are collected on a 100 .mu.M mesh, centrifuged (150.times.g for 1o min) and resuspended in fresh medium. Rapidly growing cell cultures can be subcultured weekly. Next, callus formation from hypocotyls segments is established on semi-solid MS medium (Carolina Biological supply company) containing 1 mg/l kinetin and 3 mg/l 2,4-D. Homogenously growing calli is subcultured every 4 weeks on fresh medium. The resulting friable calli is then resuspended in 50 ml MS medium containing 3% sucrose and 0.1 mg/kinetin. Finally, suspension-cultured cells are filtered through a 100 .mu.M mesh and subjected to bombardment with chloroplast vectors.
Fine cell suspension culture of carrot, evenly spread over MS semi-solid medium is used for bomardment. After bombardment the explants are incubated in the dark for 48 h and later in appropriate light condition (16/8 h day/night cycle at 24.degree. C.). Somatic embryogenesis is induced in a suspension of single cells and small clusters harvested on sieve and low-speed centrifugation. The harvested cells are washed once with hormone free liquid MS medium and resuspended in 40 ml hormone free MS medium containing different concentrations of betaine aldehyde (1.5, 2.5 and 3.5 mM). Transgenic somatic embryos, visible 2 weeks after induction, are selected manually and transferred onto plates with semi-solid MS medium containing 1.5% sucrose and variable concentrations of betaine aldehyde (1.5, 2.5 and 3.5 mM). The plates are sealed with parafilm. After two weeks, somatic embryos development into plantlets which are transferred to soil in pots. Initially, the pots are covered with plastic bags to maintain high humidity and irrigated with progressively reduced concentrations of MS salts for the first week, followed by tap water in the second week. Transgenic plants with stable expression of recombinant protein are then utilized for suitable assays.
The production of Yersinia pestis vaccine in a low nicotine strain of tobacco (LAMD) is accomplished by expressing in chloroplasts the F1-V antigen fusion protein produced from F1 gene (513 bp/15.5 kDa) and the entire V antigen (980 bp/35 kDa). The entire immunogenic sequence will be (441+980+6 for a hinge=1437 bp). With the protein of 478 amino acids having a calculated mass of 53,193 and a pI of 5.1 has shown this fusion protein to be immunoprotective.
F1-V was modified to add an EcoR1 site. This fragment is cloned into the universal chloroplast vector, which has been described above, with the psbA 5′UTR upstream of the F1-V fusion. The use of the psbA 5′UTR, is not required, but it has been shown to increase expression of foreign proteins by chloroplast.
Large-scale expression of the fusion protein results in the formation of inclusion bodies as observed with several other foreign proteins expressed in transgenic chloroplasts. These inclusion bodies are easily separated by centrifugation. Another option is use of ammonium sulphate for the precipitation of the protein.
Optionally, a His-tag with an enterokinase cut site was added to the above construct. The His-tag allows for purification on a nickel column with subsequent cleavage of the fusion protein from the His-tag.
The plasmid pPW731 (a pET-24 vector) carrying the gene for the F1V fusion protein was delivered in BLR strain of E. coli. Because of the exonuclease activity in BLR, XL1-Blue strain of E. coli was transformed with pPW731. Using NdeI and NotI, F1V was cut out of pPW731 and ligated into PCR2.1 with 5′psbA. In order to ligate 5′psbA-F1V into the universal chloroplast vector, pLD-CtV, PCR2.1-5′psbA-F1V was cut with Sac I, and blunt ended, then cut with Not I. This was ligated into pLD-CtV which had been cut with EcoRV (blunt end) and Not I. This produced the chloroplast vector pLDS-F1V containing the 5′UTR psbA upstream of F1V, which was then used for bombardment. The use of the psbA 5′UTR has proven to increase expression of foreign proteins by chloroplasts.
After bombarding tobacco leaves with pLDS-F1V, there are three possibilities that might produce shoots: chloroplast transgenic, nuclear transgenic, and mutants resistant to spectinomycin. In order to select chloroplast transgenic plants we utilize two PCR reactions. The first (
The second PCR reaction (
Turning to
Cloning F1-V Antigen into Tomato:
The F1-V antigen, which is a bacterial antigen, was cloned into the tomato pLD vector between gene 10 and rps 16 terminator. This was discussed further above. In this case, the selectable marker, BADH, with psbA 5′ UTR and psbA 3′ follows the rps16 region. The second vector made contains F1-V attached to the carboxy terminus of CTB. CTB serves as a mucosal carrier for this plague protein.
The increased production of an efficient transmucosal carrier molecule and delivery system in chloroplasts of plants allows the production of plant based oral vaccines and fusion proteins with CTB. CTB has previously been expressed in nuclear transgenic plants at levels of 0.01 (leaves) to 0.3% (tubers) of the total soluble protein. To increase expression levels, the chloroplast genome was engineered to express the CTB gene. We observed expression of oligomeric CTB at levels of 4-5% of total soluble plant protein. PCR and Southern Blot analyses confirmed stable integration of the CTB gene into the chloroplast genome. Western blot analysis showed that transgenic chloroplast expressed CTB was antigenically identical to commercially available purified CTB antigen. Also, GM1-ganglioside binding assays confirm that chloroplast synthesized CTB binds to the intestinal membrane receptor of cholera toxin Transgenic tobacco plants were morphologically indistinguishable from untransformed plants and the introduced gene was found to be stably inherited in the subsequent generation as confirmed by PCR and Southern blot analyses. Thus chloroplasts form disulfide bridges to assemble foreign proteins. Spontaneously forming CTB pentamers exhibit intact transcytosis to the external basolateral membrane of intestinal epithelium, and have been widely used as oral vaccine vehicles.
Chloroplast transformation has been accomplished only in a few Solanaceous crops so far. There are several challenges in extending this technology to other crops. So far, only green chloroplasts have been transformed in which the leaf has been used as the explant. However, for many crops, including monocots, cultured non-green cells or other non-green plant parts are used as explants. These non-green tissues contain proplastids instead of chloroplasts, in which gene expression and gene regulation systems are quite different. During transformation, transformed proplastids should develop into mature chloroplasts and transformed cells should survive the selection process during all stages of development. Therefore, the major challenge is to provide chloroplasts the ability to survive selection in the light and the dark, at different developmental stages. This is absolutely critical because only one or two chloroplasts are transformed in a plant cell and these plastids should have the ability to survive the selection pressure, multiply and establish themselves while all other untransformed plastids are eliminated in the selection process. The Double Barrel Plastid Vectors accomplish this by using genes coding for two different enzymes capable of detoxifying the same selectable marker (or spectrum of selectable markers), driven by regulatory signals that are functional in proplastids as well as in mature chloroplasts.
The plastid vector described here is one among several such examples (non-limiting example). The chloroplast flanking sequence contains appropriate coding sequences and a spacer region into which the transgene cassette is inserted. Any spacer sequence within the plastid genome could be targeted for transgene integration, including transcribed and transcriptionally silent spacer regions. Both aphA-6 and aphA-2 (nptII) genes code for enzymes that belong to the aminoglycoside phosphotransferase family but they originate from different prokaryotic organisms. Because of prokaryotic nature of the chloroplast genome, these genes are ideal for use in transgenic chloroplasts without any codon optimization. Genes of prokaryotic origin have been expressed at very high levels in transgenic chloroplasts (up to 47% of total soluble protein, DeCosa et al., 2001). Both enzymes have similar catalytic activity but the aphA-6 gene product has an extended ability to detoxify kanamycin and provides a wider spectrum of aminoglycoside detoxification, including amikacin. The advantage of choosing kanamycin as a selectable marker is that it has no natural resistance, unlike spectinomycin resistance observed in most monocots or spontaneous point mutation of the 16 S rRNA gene observed during the selection process. In addition, kanamycin is not in human clinical use as an antibiotic and several crops containing kanamycin resistant nuclear transgenes have been already approved by FDA for human consumption (e.g. flavor savor tomatoes) and currently in the market place.
As shown in
For genetic engineering of the corn chloroplast genome, corn specific sequences, flanking the targeted integration site in the corn chloroplast genome (trnI and trnA) were amplified with specific PCR primers and subcloned to flank the betaine aldehyde dehydrogenase (BADH) selectable marker, and green fluorescent protein (GFP) reporter gene expression cassette.
Callus cultures were initiated from aseptically excised immature zygotic embryos (1-2 mm in length), produced on self-pollinated ears of HiII (F1) maize plants. Ears were surface sterilized in a solution containing 2.6% Sodium hypochlorite (prepared with commercial bleach) containing 0.1% Tween 20 (polyoxyethylene sorbitan monolaurate) for 20 minutes under continuous shaking, then rinsed 4 times in sterile distilled water. The Embryos were then placed on the callus induction medium CI-1, which contained N6 salts and vitamins (463.0 mg/l (NH.sub.4).sub.2SO.sub.4, 2830.0 mg/lKNO.sub.3, 400 mg/l KH.sub.2PO.sub.4, 166.0 mg/l CaCl.sub.2, 185 mg/l MgSO.sub.4.7H.sub.2O, 37.3 mg/l Na.sub.2-EDTA, 27.85 mg/l FeSO.sub.4.7H.sub.2O, 1.6 mg/l H.sub.3BO.sub.3, 4.4 mg/l MnSO.sub.4.H.sub.2O, 0.8, KI, 1.5 mg/l ZnSO.sub.4.7H.sub.2O), 2% sucrose and 1.0 mg/l 2,4-D (2,4 dichloro-phenoxy acetic acid), with the rounded scutellar side exposed and the flat plumule-radicle axis side in contact with the medium. Callus cultures were maintained in darkness at 25-28.degree. C. and subcultured every two weeks.
Micro projectiles were coated with DNA (pDA34-ZM-gfp-BADH and pDA33-ZM-aadA-BADH) and bombardment was carried out with the biolistic device PDS1000/He (Bio-Rad).
Prior to bombardment, embryogenic calli were selected, transferred over sterile filter paper (Watman No. 1), and placed on the surface of a fresh medium in standard Petrti plates (100.times.15 mm). Gold particles (0.6 .mu.m) were then coated with plasmid DNA as follows: 50 .mu.l of washed gold particles were mixed with 10 .mu.l DNA (1 .mu.g/.mu.l), 50 .mu.l of 2.5M CaCl.sub.2, 20 .mu.l of 0.1M spermidine and vortexed. Particles were cneterfuged for a few seconds at 3000 rpm and then the ethanol was poured off. Ethanol washing was repeated five times, then the pellet was resuspended in 30 .mu.l of 100% ethanol and placed on ice until it was used for bombardment (the coated particles were used within 2 hours). Bombardment was carried out with the biolistic device PDS 1000/He (Bio Rad) by loading the target sample at level 2 in the sample chamber under a partial vacuum (28 inches Hg).
The callus cultures were bombarded with the maize chloroplast transformation vectors using 1100 psi rupture discs. Following bombardment, the explants were transferred to a fresh medium; plates were sealed with micropore tape and incubated in darkness at 25-28.degree. C.
Selection was intiated two days after bombardment. The bombarded calli were transferred to callus induction medium containing 5-20 mM BA (betaine aldehyde) or 25-100 mg/l streptomycin. Selection was also carried out using 50-150 mM NaCl in combination with the BA to maintain osmostic pressure.
Regeneration was initiated 6 to 8 weeks after bombardment by transferring the calli to a medium R1 containing Ms salts and vitamins supplemented with 1.0 mg/l NAA (.alpha.-naphthalene acetic acid), 2% sucrose, 2 g/l myoinositol and 0.3% phytagel at pH 5.8. Regenerated plants were transferred to R2 containing ½ MS salts and vitamins, 3% sucrose and 0.3% phytagel at pH 5.8. Regenerated plants were maintained in light (16/8 hr photoperiod).
Corn seeds were surface sterilized in a solution containing 2.6% Sodium hypochlorite (prepared from commercial bleach) containing 0.1% Tween 20 for 20 minutes under continuos shaking, then rinsed four times in sterile distilled water. Seeds were grown on MS medium at pH 5.8 in darkness. Nodal sections were excised aseptically from three day old seedlings. The nodal sections appear as clear demarcations on the germinated seedlings and represent the seventh node. When excised, the nodal cross sections are 1.3 to 1.5 mm in length.
Prior to bombardment, 20-30 nodal sections were placed in the center of each petri plate with acropitila end up. Bombardment was carried out with the maize chloroplast vectors, using 1100, 1300 and 1550 psi rupture discs.
Nodal section explants are placed acropital end up on shoot multiplication medium SM1 composed of Ms salts and vitamins, 1.0 mg/l 6BA (6-Benzyl amino purine), 3% sucrose and 5 g/l phytagel at pH 5.8 under continuous light at 25.degree. C. Initiation of the shoot-tip clumps from the original shoot tips occurred 2 to 4 weeks after culture. Two days after bombardment, transformed nodal sections were transferred to shoot multiplicaton medium containing 5-20 mM BA or 50-100 mg/l streptomycin selective agents. Subsequent subcultures at two week intervals were carried out by selecting, dividing and subculturing green clumps on selective shoot multiplication medium containing 5-20 mM BA or 25-100 mg/l streptomycin.
The Multiple shoot clumps were regenerated by transferring them to regeneration medium M1 containing MS salts and Vitamins, 5 mg/l IBA and 3% sucrose at pH 5.8. The developed shoots were regenerated by transferring the shoot tip clumps to M2 medium containing ½ MS salts and vitamins, 3% sucrose and 3 g/l phytagel at pH 5.8. It should be further rnoted that all the regeneration media are supplemented with 5-20 mM BA or 25-100 mg/l streptomycin as the selective agents.
To engineer the corn chloroplast genome free of antibiotic resistance genes, maize calli were bombarded with a chloroplast expression vector containing the green fluorescent protein (GFP) and the betaine adehyde dehydrogenase (BADH) genes as selectable or screenable markers. To compare the betaine aldehyde (BA) selection with streptomycin, another chloroplast expression vector was constructed containing the aada and the BADH genes. The number of putative transgenic events was higher on BA selection than on streptomycin. Transgenic corn tissues screened on BA were examined using a laser-scanning confocal microscope. The GFP fluorescence was observed throughout the somatic embryos of corn. Chloroplast transformation of corn provides a suitable avenue for the production of edible vaccines and oral delivery of biopharmaceuticals.
Corn chloroplast transformation vector facilitates the integration of transgene into the inverted repeat (IR) region of the corn chloroplast genome. The vector pLD-Corn-BADH contains the chimeric aadA gene and the BADH gene driven by the constitutive 16 S rRNA promoter and regulated by the 3′ UTR region of psbA gene from petunia plastid genome. In this construct both, aadA and BADH possess the chloroplast preferred ribosomal binding site, GGAGG. Another vector used for corn chloroplast transformation pLD-corn-UTR-BADH has the constitutive 16 S rRNA promoter driving the expression of the dicistron, but BADH is under the regulation of the promoter and the 5′ UTR of the psbA gene and the 3′ UTR of psbA gene, for enhanced expression. Since the expression of the foreign protein is desired in chromoplasts of corn seeds, the gene of interest needs to be under the control of a regulatory sequence that is free from cellular control. In this context, examples of suitable candidate regulatory sequences are the T7 gene 10-leader sequence and cry2Aa2 UTR. The T7 gene 10-leader sequence is used to express foreign proteins in transgenic chromoplasts. The cry2Aa2 UTR has been shown by the inventor to accumulate as much foreign protein in chromoplasts as efficient as the psbA UTR in green tissues. Therefore the selectable marker for additional vectors use the BADH gene under the regulation of psbA promoter and 5′UTR, as psbA is one of the most efficiently translated chloroplast genes in green tissues. When green tissue or non-green embryogenic calli are used for introducing the transgene into the corn chloroplast genome, it is preferred to use the light regulated psbA promoter/UTR or 16 S rRNA promoter/gene 10 UTR, respectively.
Annual ryegrass chloroplast transformation vector facilitates the integration of transgene into the inverted repeat (IR) region of the annual ryegrass chloroplast genome. The vector pLD-Ryegrass-BADH contains the chimeric aadA gene and the BADH gene driven by the constitutive 16 S rRNA promoter and regulated by the 3′ UTR region of psbA gene from petunia plastid genome. In this construct both, aadA and BADH possess the chloroplast preferred ribosomal binding site, GGAGG. Another vector used for ryegrass chloroplast transformation pLD-ryegrass-UTR-BADH has the constitutive 16 S rRNA promoter driving the expression of the dicistron, but BADH is under the regulation of the promoter and the 5′ UTR of the psbA gene and the 3′ UTR of psbA gene, for enhanced expression. When green tissue or non-green embryogenic calli are used for introducing the transgene into the corn chloroplast genome, it is preferred to use the light regulated psbA promoter/UTR or 16 S rRNA promoter/gene 10 UTR, respectively.
Studies have confirmed the role of PA as the major protective antigen in the humoral response but also indicate a significant contribution of LF and EF to immunoprotection. The LF amino terminal domain, amino acid residues 1-254 (27 kDa) contains all the information necessary for binding PA and mediating translocation, and this domain alone is nontoxic because the catalytic domain of LF, residues 255-776, is responsible for lethality. Titers of antibody to both PA and LF from mice immunized with the combination were 4 to 5 times greater than titers from mice immunized with either alone. Therefore we express the constructs LF27-PA63 (PA63 is the cleaved active form of PA), CTB-LF27 fusion proteins, and LF27 and PA independently within the same edible plant as a standard. The LF27-PA63 and CTB-LF27 constructs are expressed alone and together as an operon in corn and ryegrass. It has been demonstrated that Rotavirus enterotoxin proteins fused with CTB is processed via the MHC II pathway generating a strong T-cell response. Thus CTB-fusion proteins produced in plants are ideal for oral delivery. By expressing the CTB-LF27 and PA-LF27 we maximize immunity to lethal toxin challenge. This is because both Gm1 ganglioside and anthrax toxin receptor (ATR) can be bound by ligands and work synergistically for maximum immune response. A flexible hinge was introduced between fusion proteins to reduce steric hindrance. Specifically a glycine-proline-glycine-proline hinge between CTB-LF27 and proline-glycine-proline-glycine hinge between LF27-PA63 was used. The application of less frequently used codons in plants within the hinge peptide promotes translational arrest during the protein elongation process, facilitating subunit folding prior to translation. The efficiency of folding of some proteins is increased by controlled rates of translation in vivo.
Using either immature embryos (IEs) or embryogenic callus derived from IEs as a target for biolistic gene transfer is a well-established procedure for stable integration into the nuclear genome of corn or ryegrass. For biolistic transfer of integrative chloroplast expression vectors, the gene transfer protocol is adjusted and smaller particle sizes (0.6 .mu.m diameter) are used. Microprojectiles are coated with plasmid DNA (chloroplast vectors) and bombardments are carried out with the biolistic device PDS 1000/He (Bio-Rad) as is well-known in the art relating to the use of the “gene-gun.” Expression levels from chloroplast regulatory sequences and the size of the proplastids are limiting factors for the successful chloroplast transformation using non-green, embryogenic callus tissues as a target for the gene transfer. Therefore, it is most desirable, when using the present invention with plant species not tested here, to compare green shoot meristematic cultures with non-green embryogenic callus as target tissue for chloroplast transformation. Protocols for the establishment of these tissue types are reported for corn and the grasses and are established in the Alpeters laboratory at University of Florida at Gainesville for ryegrass.
The timing of gene transfer after culture initiation and the duration and level of selection affect transgenic events while reducing the number of chimeric plants and achieving homoplasmy and are best evaluated empirically. BADH and aadA selectable markers are compared with the corresponding selective agents. Selection is to be maintained during the regeneration process of plants. Regenerated plants are then analyzed by PCR and Southern blot for integration in the corn or ryegrass plastome.
PCR is done using DNA isolated from control and transgenic plants in order to distinguish a) true chloroplast transformants from mutants and b) chloroplast transformants from nuclear transformants. In order to test chloroplast integration of the transgenes, the 3′ primer will anneal to the selectable marker gene while the 5′ primer will anneal to the native chloroplast genome. No PCR product is expected with nuclear transgenic plants or mutants using this set of primers. This screening is essential to eliminate mutants and nuclear transformants. Total DNA from wildtype and transgenic plants is isolated and used as a template for PCR reactions. Southern blots allow one skilled in the art to determine the copy number of the introduced foreign gene per cell as well as to test homoplasmy. There are several thousand copies of the chloroplast genome present in each plant cell. When foreign genes are inserted into the chloroplast genome, not all chloroplasts will integrate foreign DNA resulting in heteroplasmy. To ensure that only the transformed genome exists in transgenic plants (homoplasmy), the selection process is continued. In order to confirm homoplasmy at the end of the selection cycle, total DNA from transgenic plants is probed with the chloroplast border (flanking) sequences (the trnI-trnA fragment). Wild type fragment size is observed along with the larger fragments of transformed plastomes. Presence of a large fragment (due to insertion of foreign genes within the flanking sequences) and absence of the native small fragment confirms homoplasmy. The copy number of the integrated gene is determined by establishing homoplasmy for the transgenic chloroplast genome.
Using the aforementioned transformation protocols, vectors for the production of an orally administrable form of PA are introduced in ryegrass and corn plants. Site specific vector integration into the ryegrass or corn plastome is then confirmed by PCR and Southern blot analysis as specified. Western blot verification of PA verifies that recombinant anthrax protective antigen proteins are antigenically similar to native PA using monoclonal antibodies against PA (Advanced ImmunoChemical G1-Ba1). PA is quantified by a ELISA using purified PA antigen as standard and commercially available antibody. Electron microscopy is next carried out in mature leaves of chloroplast or mature seeds amyloplasts of transgenic plants to detect inclusion bodies according a protocol and similar to several published electron micrographs of transgenic chloroplasts, with immunogold label of foreign proteins. The PA protein is then purified using a two step protocol, such as that described in Ahuja, N., Kumar, P., & Bhatnagar, R. (2001), Rapid Purification of Recombinant Anthrax-Protective Antigen under Nondenaturing Conditions, Biochemical and Biophysical Research Communications, 286, 6-11. The protein is purified on AKTA-FPLC using anion exchange Resource Q column (Pharmacia). The protein is then eluted from the column with a 20 ml decreasing gradient of ammonium sulphate. Fractions of 1 ml each are collected, analyzed on SDS-PAGE, and those containing PA are pooled. With an affinity tag, the PA protein can optionally be purified using metal-chelate affinity chromatography under denaturing conditions. Ten ml of each fraction is then analyzed on 12% SDS-PAGE. Fractions containing the protein are collected, pooled, and dialyzed against 10 mM Hepes buffer containing 50 mM NaCl and stored frozen at −70.degree. C. in suitable aliquots.
Recombinant PA proteins are then assayed for their functional activity in the J774A1 (American Type Culture Collection) macrophage lysis assay. Varying concentrations of PA protein along with LF (1 mg/ml) are added to the cells. The native PA along with LF is kept as the positive control. After 3 h, cell viability is determined using the MTT (3-(4,5-dimethyl thiazol-2-yl),-5-diphenyltetrazolium bromide) dye and the resulting precipitate is dissolved in a buffer containing 0.5% (w/v) sodium dodecyl sulfate, 25 mM HCl in 90% isopropyl alcohol. Absorption at 540 nm is measured and percent viability determined.
PA can be tested for susceptibility to cleavage by trypsin. To do so, the PA protein (1.0 mg/ml) is incubated with trypsin (1 ng/mg of protein) for 30 min at room temperature in 25 mM Hepes, 1 mM CaCl2, 0.5 mM EDTA, pH 7.5. The digestion reaction is stopped by adding PMSF to a concentration of 1 mM. Trypsin nicked PA (1.0 mg/ml) is incubated with LF (1.0 mg/ml) and in 25 mM Tris, pH 9.0, containing 2 mg/ml CHAPS (3-{(3-cholamidopropyl)dimethyl ammonio}-propanesulfonic acid) for 15 min at room temperature. Samples are applied to nondenaturing 4.5% polyacrylamide gel.
The binding of PA protein to cell surface receptor is analyzed in 24 well plates using constant amount of radio-iodinated native PA (0.1 mg/ml). J774A.1 (ATCC) cells are washed twice with cold HBSS for 5 minutes each time and then placed on ice. The medium is replaced with cold binding medium (DMEM, Dulbecco's Modified Eagle Medium, without sodium bicarbonate containing 1% bovine serum albumin and 25 mM, Hepes, pH 7.4). The cells are incubated with 0.1 mg/ml of iodinated PA and varying concentrations of the recombinant PA protein at 4.degree. C. for 3 h and then washed with cold HBSS. The cells are then dissolved in 0.1 N NaOH and radioactivity measured in Gamma counter.
Leaves from transgenic lines producing epitope tagged products are frozen and powdered at 4.degree. C. using a microdismembranator and proteins are extracted in PBS with 1% Triton X-100. Fusion proteins are purified by affinity chromatography on a nickel-agarose bed, using standard 6-His methods, as described above.
Corn and ryegrass expressing PA as potential edible vaccines against anthrax are characterized using the protocol described above. These are then evaluated for the ability of PA-expressing corn seeds or corn or ryegrass leaves or bay to function as edible vaccines for the induction of serum and mucosal (bronchial lavage, nasal, vaginal, and fecal) antibodies by ELISA. Antibodies induced by feeding the transgenic corn or ryegrass to mammals neutralize the biologic activity of anthrax lethal toxin. This activity can be confirmed in an in vitro macrophage cytotoxicity assay. Antibody responses in mice and humans following ingestion of transgenic potatoes and corn expressing recombinant bacterial proteins have been successfully demonstrated.
Oral immunization of mice and other mammals by feeding transgenic plants or plant parts is accomplished as follows. In the case of corn and ryegrass, female BALB/c mice are fed transgenic corn or ryegrass, control corn or ryegrass, or soluble rPA in conjunction with the mucosal adjuvant LT(R192G). The amount of rPA fed to control animals is based upon the amount of PA in the transgenic corn or ryegrass fed to the animals. That amount correlates with the amount of transgenic corn or ryegrass a mouse will consume in a one hour period. Mice tend to eat grass if a small amount of vanilla extract is placed on each leaf. Two additional groups can be included in which the mucosal adjuvant LT(R192G) is administered in conjunction with the transgenic or control corn or ryegrass. Edible vaccines administered to mice often require the presence of a mucosal adjuvant due to the small amount of material that can be consumed by a mouse. However, this is not necessary when using the plants of the present invention to vaccinate humans, or other large mammals due to the volume which can be consumed by the animal. Twenty-five micrograms of the adjuvant should be applied directly to the corn or ryegrass before consumption when testing mice.
Intranasal immunization is accomplished in mice as follows. Mice are first lightly anesthetized with Isoflurane for approximately 45 seconds. The immunizing inoculum (5-10 ml per animal/per dose) is delivered intranasally to the external nares of one nostril with a pipette tip.
Oral immunization: Oral inoculations consisted of 500 ml of the antigen preparation in saline delivered intragastrically with a blunt-tip feeding needle (Popper & Sons, Inc.).
Sample collection: Animals are sacrificed following euthanasia by CO.sub.2 inhalation. Blood is collected by cardiac puncture and the serum is separated in Microtainer tubes. Bronchoalveolar lavages (BAL) are obtained by inserting a 20 G cannula in the exposed trachea and injecting 1 ml of PBS supplemented with protease inhibitors. The buffer is allowed to bathe the lung for approximately 20 seconds and then it is suctioned out; this procedure is repeated three times in each mouse. The resulting BAL fluid is immediately centrifuged (400 g, 2 min, 4.degree. C.) and the supernatant is saved. To obtain nasal lavages a flexible 24 gauge canula is inserted into the posterior opening of the nasopharynx and a total of 150 ml ml PBS+ protease inhibitor is injected into the opening. The outflow is collected as the nasal wash. Vaginal washes are obtained by washing the vaginal mucosa three times with 50 .mu.l of PBS containing 0.01% NaN.sub.3. For determination of fecal IgA, feces are collected and frozen overnight at −70.degree. C., lyophilized, resuspended in 800 .mu.l PBS containing 0.05% sodium azide per 15 fecal pellets, centrifuged at 1,400.times.g for 5 minutes, and the supernatant stored at −20.degree. C. until assayed.
Evaluation of humoral and mucosal antibodies: Each serum, BAL, nasal wash, vaginal wash, and fecal extract sample is individually analyzed by ELISA. For all ELISA assays, 96-well plates are coated with 500 ng per well of rPA and incubated overnight at 4.degree. C. All subsequent steps are carried out at room temperature. After blocking with 1% BSA, twofold serial dilutions of serum, BAL, nasal wash, vaginal wash, or fecal extract from the experimental animals are added. Alkaline phosphatase conjugated rabbit anti-mouse IgG or anti-mouse IgA are used for determination of total IgG or IgA. Biotinylated anti-mouse IgG1, IgG2a, IgG2b or IgG3 followed by alkaline phosphatase conjugated streptavidin are used to quantify antibody isotypes. Optical density at 405 nm is determined using an ELISA reader.
The present application is a continuation of U.S. Ser. No. 12/014,352 filed Jan. 15, 2008, which is a continuation of U.S. Ser. No. 10/500,351 filed Jan. 3, 2005, now issued as U.S. Pat. No. 7,354,760, which is a national stage filing of PCT/US02/41503 filed Dec. 26, 2002, which claims priority to U.S. Ser. Nos. 60/400,816 filed Aug. 2, 2002, 60/393,651 filed Jul. 3, 2002, and 60/344,704 filed Dec. 26, 2001 which are incorporated herein in their entirety by reference.
| Number | Date | Country | |
|---|---|---|---|
| 60400816 | Aug 2002 | US | |
| 60393651 | Jul 2002 | US | |
| 60344704 | Dec 2001 | US |
| Number | Date | Country | |
|---|---|---|---|
| Parent | 12014352 | Jan 2008 | US |
| Child | 13684813 | US | |
| Parent | 10500351 | Jan 2005 | US |
| Child | 12014352 | US |
