Stewart, D.; “A Platform with Six Degrees of Freedom”, Proc. of Inst. Mech. Engrs., 1965, 180, 371-378. |
Paros, J.M.; Weisbord, L.; “How to Design Flexure Hinges”, Machine Design, 1965, 151-156. |
Raibert, M.H.; Craig, J.J.; “Hybrid Position/Force Control of Manipulators”, 1981, 102, 126-133. |
Hogan, Neville; “Impedance Control: An Approach to Manipulation”, Journal of Dynamic Systems, Measurement and Control, 1985, 107, 1-7. |
Hollis, Ralph; Salcudean, S.E.; Allan, A.P.; “A Six-Degree-of-Freedom Magnetically Levitated Variable Compliance Fine-Motion Wrist: Design, Modeling and Control”, IEEE Transactions on Robotics and Automation, 1991, 7, 320-332. |
Tomita, Y. et al.; “6-Axes Motion Control Method for Parallel-Linkage-Type Fine Motion Stage”, Journal of Japan Society of Precision Engineering, 1992, 118-124. |
Slocum, Alexander; “Precision Machine Design: Macromachine Design Philosophy and its Applicability to the Design of Micromachines”, Proc. of IEEE Micro Electro Mech. Systems Workshop, 1992, 37-42. |
Krug, Herbert; Merl, Norbert; Schmidt, Helmut; “Fine Patterning of Thin Sol-Gel Films”, Journal of Non-Crystalline Solids, 1992, 447-450. |
Arai, T.; Larsonneur, R.; Jaya, Y.M.; “Calibration and Basic Motion of a Micro Hand Module”, Proc. of IECON, 1993, 1660-1665. |
Peng, Zhi-Xin; Adachi, N.; “Compliant Motion Control of Kinematically Redundant Manipulators”, IEEE Transactions on Robotics and Automation, 1993, 9, 831-837. |
Rong, Y.; Zhu, Y.; Luo, Z.; Liu, X.; “Design and Analysis of Flexure-Hinge Mechanism Used in Micro-Positioning Stages”, ASME, 1994, 2, 979-985. |
Hashimoto, M.; Imamura, Y.; “Design and Characteristics of a Parallel Link Compliant Wrist”, IEEE International Conference on Robotics and Automation, 1994, 2457-2462. |
Merlet, J.P.; “Parallel Manipulators; State of the Art and Perspectives”, Advanced Robotics, 1994, 8, 589-596. |
Ananthasuresh, S.; Kikuchi, N.; “Strategies for Systematic Synthesis of Compliant MEMS”, ASME, 1994, 2, 677-686. |
Arai, T.; Tanikawa, T.; Merlet, J.P.; Sendai, T., Development of a New Parallel Manipulator with Fixed Linear Actuator, Proc. of Japan/USA Symposium on Flexible Automation, 1996, 1, 145-149. |
Howell, L.L.; Midha, A.; “Loop-Closure Theory of the Analysis and Synthesis of Compliant Mechanisms”, Journal of Mechanical Design, 1996, 118, 121-125. |
Haisma, J. et al.; “Mold-Assisted Nanolithography: A Process for Reliable Pattern Replication”, Journal of Vacuum Science and Technology, 1996, 14, 4124-4128. |
Pernette, Eric; Henein, Simon; Magnani, Ivo; Clavel, Reymond; “Design of Parallel Robots in Microrobotics”, Robotica, 1997, 15, 417-420. |
Rong, L.; Guanghua, Z.; “Dynamics of Parallel Mechanism with Direct Compliance Control”, IEEE, 1997, 1753-1758. |
Mittal, Samir; Menq, Chia-Hsiang; “Precision Motion Control of Magnetic Suspension Actuator Using a Robust Nonlinear Compensation Scheme”, IEEE/ASME Transactions on Mechatronics, 1997, 2, 268-280. |
Physik Instruments, Product Catalog for Micropositioning, 1997. |
Williams, Mark et al.; “Six Degree of Freedom Mag-Lev Stage Development”, SPIE, 1997, 3051, 856-867. |
Lee, Chang-Woo; Kim, Seung-Woo; “Ultraprecision Stage for Alignment of Wafers in Advanced Microlithography”, Precision Engineering, 1997, 21, 113-122. |
Kanetomo, M.; Kashima, H.; Suzuki, T.; “Robot for Use in Ultrahigh Vacuum”, Solid State Tech., 1997, 63-72. |
Goldfarb, M.; Speich, J.; “Compliant Micromanipulator Design for Scaled Bilateral Telemanipulation of Small-Scale Environments”, ASME, Dynamic Systems and Control Div., 1998, 64, 213-218. |
Koseki, Y. et al.; Design and Accuracy Evaluation of High-Speed and High Precision Parallel Mechanism, Proc. of IEEE, Intl. Conf. on Robotics & Automation, 1998, 1340-1345. |
Kim, Won-Jong; Trumper, David; “High Precision Magnetic Levitation Stage for Photolithography”, Precision Engineering, 1998, 22, 66-77. |
Mansky, P. et al.; “Large-Area Domain Alignment in Block Copolymer thin Films Using Electric Fields”, Macromolecules, 1998, 31, 4399-4401. |
Wang, W.; Loh, R.; Gu, E.; “Passive Compliance Versus Active Compliance in Robot-Based Automated Assembly Systems”, Industrial Robot, 1998, 25, 48-57. |
Scheer, H.C. et al.; “Problems of Nanoimprinting Technique for Nanometer Scale Pattern Definition”, Journal of Vacuum Science and Technology, 1998, 16, 3917-3921. |
Xia, Y.; Whitesides, George; “Soft Lithography”, Annu. Rev. Mater. Sci., 1998, 28, 153-184. |
Tajbakhsh, H. et al.; “Three-Degree-of -Freedom Optic Mount for Extreme Ultraviolet Lithography”, ASPE, 1998, 18, 359-362. |
Lee, Dong Sung et al.; “Ultra Precision Positioning System for Servo Motor-Piezo Actuator Using Dual Servo Loop and Digital Filter Implementation”, ASPE, 1998, 18, 287-290. |
Wu, Wei et al.; “Large Area High Density Quantized Magnetic Disks Fabricated Using Nanoimprint Lithography”, 1998, Journal of Vacuum Science and Technology, 1998, 16, 3825-3829. |
Ohya, Y. et al.; “Development of 3-DOF Finger Module for Micro Manipulation”, Proc. of IEEE, Intl. Conf. on Intelligent Robots and Systems, 1999, 894-899. |
Tanikawa, T. et al.; “Development of Small-Sized 3 DOF Finger Module in Micro Hand for Micro Manipulation”, Proc. of IEEE, Intl. Conf. on Intelligent Robots and Systems, 1999, 876-881. |
Colburn, M. et al.; “Step and Flash Imprint Lithography: New Approach to High-Resolution Patterning”, Proc. of SPIE, 1999, 3676, 379-389. |
Lucas Aerospace, Free-Flex Pivot Catalog. 1999. |
Goldfarb, M.; Speich, J.E.; “A Well-Behaved Revolute Flexure Joint for Compliant Mechanism Design”, Journal of Mech. Design, 1999, 121, 424-429. |
Geodetic Technology, G1000-PS Power Series Specifications, 1999, from www.hexapods.com. |
Hexel Corporation, Tornado 2000 System Specifications, 1999, from www.hexel.com. |
Physik Instruments, PI Online-Catalog, 1999, from www.physikinstruments.com. |
Chou, Stephen; Zhuang, Lei; “Lithographically-induced Self Assembly of Periodic Micropillar Arrays”, Journal of Vacuum Science and Technology, 1999, 17, 3197-3202. |
Ruchhoeft, P. et al.; “Patterning Curved Surfaces: Template Generation by Ion Beam Proximity Lithography and Relief Transfer by Step and Flash Imprint Lithography”, Journal of Vacuum Science and Technology, 1999, 17, 2965-2982. |
Vanderbilt University Office of Transfer Technology; VU 9730 Specifications for Improved Flexure Device; 2001, from www.vanderbilt.edu. |
Stix, Gary; “Getting More from Moore's”, Scientifc American, 2001, from www.scientificamerican.com. |
Trilogy Systems, Linear Motors 310 Specification, 2001, from www.trilogysystems.com. |
Choi, B.J. et al.; “Design of Orientation Stages for Step and Flash Imprint Lithography”, Precision Engineering, 2001, 25, 192-199. |
PCT International Search Report for PCT/US 00/30041, dated Oct. 15, 2001. |
PCT International Search Report for PCT/US 01/26049, dated Feb. 19, 2002. |
White et al., “Novel alignment system for imprint lithography” 44th International Conference on Electron, Ion, and Photon Beam Technology and Nanofabrication, Rancho Mirage, CA, USA, May 30-Jun. 2, vol. 18, No. 6, pp. 3552-3556, Journal of Vacuum Science and Technology, Part B, Nov. 2000. |
Lin, “Multi-Layer Resist Systems”, Introduction of Microlithography, American Chemical Society, 1983, pp. 287-350, IBM T.J. Watson Research Center, Yorktown Heights, New York 10598. |
Cowie, “Polymers: Chemistry and Physics of Modern Materials”, 1991, pp. 408-409, 2nd Ed, Chapman and Hall, a division of Routledge, Chapman and Hall, Inc., 29 West 35th Street, NY, NY 10001-2291. |
Chou et al., “Imprint of Sub-25 nm Vias and Trenches in Polymers”, Applied Physics Letters, Nov. 20, 1995, pp. 3114-3116, vol. 67(21). |
Chou et al., “Imprint Lithography with 25-Nanometer Resolution”, Science, Apr. 5, 1996, pp. 85-87, vol. 272. |
Chou et al., “Imprint lithography with Sub-10nm Feature Size and High Throughput”, Microelectronic Engineering, 1997, pp. 237-240, vol. 35. |
Xia et al., “Soft Lithography”, Agnew. Chem. Int. Ed., 1998, pp. 550-575, vol. 37. |